Explosive and chemical threat detection by surface-enhanced Raman scattering: a review

Tellurium Containing Long Lived Emissive Fluorophore for Selective and Visual Detection of Picric Acid through Photo-Induced Electron Transfer

A novel tellurium (Te) containing fluorophore, 1 and its nickel (2) and copper (3) containing metal organic complex (MOC) have been synthesized to exploit their structural and optical properties and to deploy these molecules as fluorescent probes for the selective and sensitive detection of picric acid (PA) over other commonly available nitro-explosives. Furthermore, density functional theory (DFT) and single crystal X-ray diffraction (SCXRD) techniques revealed the inclusion of "soft" Tellurium (Te) and "hard" Nitrogen (N), Oxygen (O) atoms in the molecular frameworks. Owing to the presence of electron rich "N" and "O" atoms along with "Te" in the molecular framework, 1 could efficiently and selectively sense PA with more than 80 % fluorescence quenching efficiency in organic medium and having detection limit of 4.60 μM. The selective detection of PA compared to other nitro-explosives follows a multi-mechanism based "turn-off" sensing which includes photo-induced electron transfer (PET), electrostatic (π-π stacking and π-anion/cation) interaction, intermolecular hydrogen bonding and inner filter effect (IFE). The test strip study also establishes the sensitivity of 1 for detection of PA.

Facile synthesis of Ag NPs@MgO nanosheets for quantitative SERS-based detection and removal of hazardous organic pollutants

Surface-enhanced Raman spectroscopy (SERS) is a highly precise and non-invasive analytical method known for its ability to detect vibrational signatures of minute analytes with exceptional sensitivity. However, the efficacy of SERS is subject to substrate properties, and current methodologies face challenges in attaining consistent, replicable, and stable substrates to regulate plasma hot spots across a wide spectral range. This study introduces a straightforward and economical approach that incorporates monodispersed silver nanoparticles onto 2-D porous magnesium oxide nanosheets (Ag@MgO-NSs) through an in-situ process. The resulting nanocomposite, Ag@MgO-NSs, demonstrates substantial SERS enhancement owing to its distinctive plasmonic resonance. The effectiveness of this nanocomposite is exemplified by depositing diverse environmental pollutants as analytes, such as antibiotic ciprofloxacin (CIP), organic dyes like rhodamine 6G (R6G) and methylene blue (MB), and nitrogen-rich pollutant like melamine (MLN), onto the proposed substrate. The proposed nanocomposite features a 2-D porous structure, resulting in a larger surface area and consequently providing numerous adsorption sites for analytes. Moreover, engineering the active sites of the nanocomposite results in a higher number of hotspots, leading to an enhanced performance. The nanocomposite outperforms, exhibiting superior detection capabilities for R6G, MB, and MLN at concentrations of 10-6 M and CIP at concentration of 10-5 M, with impressive uniformity, reproducibility, stability, and analytical enhancement factors (EF) of 6.3 x 104, 2 x 104, 2.73 x 104 and 1.8 x 104 respectively. This approach provides a direct and cost-effective method for the detection of a broad spectrum of environmental pollutants and food additives, presenting potential applications across diverse domains. The detected environmental pollutants and food additives are removed through both catalytic degradation (R6G and MB) and adsorption (CIP and MLN).

Nanosculptured tungsten oxide: High-efficiency SERS sensor for explosives tracing

The accurate and rapid identification of explosives and their toxic by-products is an important aspect of safety protocols, forensic investigations and pollution studies. Herein, surface-enhanced Raman scattering (SERS) is used to detect different explosive molecules using an improved substrate design by controllable oxidation of the tungsten surface and deposition of Au layers. The resulting furrow-like morphology formed at the intersection of the tungsten Wulff facets increases nanoroughness and improves the SERS response by over 300 % compared to the untreated surface. The substrate showed excellent reproducibility with a relative standard deviation of less than 15 % and a signal recovery of over 95 % after ultrafast Ar/O2 plasma cleanings. The detection limit for the "dried on a surface" measurement case was better than 10-8 M using the moving scanning regime and an acquisition time of 10 s, while for the "water droplets on a surface" scenario the LoD is 10-7, which is up to 2 orders of magnitude better than the UV-Vis spectroscopy method. The substrates were successfully used to classify the molecular fingerprints of HMX, Tetryl, TNB and TNT, demonstrating the efficiency of a sensor for label-free SERS screening in the practice of monitoring traces of explosives in the water medium.

Recent advances in sensing toxic nerve agents through DMMP model simulant using diverse nanomaterials-based chemical sensors

Recent terrorist assaults have demonstrated the need for the exploration and design of sustainable and stable chemical sensors with quick reaction times combined with great sensitivity. Among several classes of chemical warfare agents, nerve agents have been proven to be the most hazardous. Even short-term exposure to them can result in severe toxic effects. Human beings inadvertently face the after-effects of these chemicals even several years after these chemicals were used. Due to the extreme toxicity and difficulty in handling, dimethyl methylphosphonate (DMMP), a simulant of nerve agents with much lesser toxicity, is frequently used in laboratories as a substitute. Having a chemical structure almost identical to those of nerve agents, DMMP can mimic the properties of nerve agents. Through this paper, authors have attempted to introduce the evolution of several chemical sensors used to detect DMMP in recent years, including field-effect transistors, chemicapacitors, chemiresistors, and mass-sensitive sensors. A detailed discussion of the role of nanomaterials as chemical sensors in the detection of DMMP has been the main focus of the work through a comprehensive overview of the research on gas sensors that have been reported making use of the properties of a wide range of nanomaterials.

Design and Synthesis of an Efficient Fluorescent Probe Based on Oxacalix[4]arene for the Selective Detection of Trinitrophenol (TNP) Explosives in Aqueous System

We present the synthesis of a new oxacalix[4]arene system, DMANSOC, wherein two 5-(dimethylamino)-1-naphthalene sulfonamide subunits are attached to the lower rims of the basic oxacalix[4]arene platform. Extensive spectrophotometric studies were conducted to investigate the selectivity and sensitivity of DMANSOC towards nitroaromatic explosives. Detailed analysis of spectrophotometric data, utilizing techniques such as Stern-Volmer, Benesi-Hildebrand, Job's plot, and interference study, unequivocally demonstrated the effectiveness of DMANSOC as a highly efficient fluorescent sensor for 2,4,6-trinitrophenol explosive (TNP) detection in an aqueous medium. The sensor exhibited a linear concentration range of 7.5 μM to 50 μM, with a low detection limit of 4.64 μM and a high binding affinity of 2.45 × 104 M towards TNP. Furthermore, the efficiency of the sensor in environmental samples contaminated with TNP was evaluated, yielding excellent recovery rates. Complementary DFT calculations and molecular dynamics simulations were performed to elucidate the mechanism behind the selective fluorescence quenching of DMANSOC in the presence of TNP.

Rapid detection of trace nitrobenzene in water via SERS using a portable Raman spectrometer

Nitrobenzene is currently the most widely used explosive substance, and is known for its high toxicity and mutagenicity. It can cause severe environmental and water pollution, posing a risk to public health. Among various explosives analysis methods, surface-enhanced Raman spectroscopy (SERS) has the advantages of fast analysis speed, low detection cost, and easy operation, and has become one of the most promising analytical detection methods. Here, we present a portable and reliable sol-based SERS method for the detection of trace amounts of 2,4,6-trinitrotoluene (TNT) in different water bodies. The Meisenheimer complex formed by nitrobenzene and hydrazine hydrate can assemble on unmodified Au nanoparticles in a sol via Au-N bonds, enabling rapid detection of TNT in seawater, lake water, and tap water using a portable Raman spectrometer. Experimental results show that this SERS method can complete the detection within a few minutes and the detection sensitivity can reach 0.01 mg L-1, which is far lower than China's national standard of no more than 0.5 mg L-1. Furthermore, this method was also successfully applied to detect trace 2,4-dinitrotoluene (2,4-DNT) and picric acid (2,4,6-trinitrophenol) in water, demonstrating its strong applicability for on-site detection of nitrobenzene explosives.

'When is a hotspot a good nanospot' - review of analytical and hotspot-dominated surface enhanced Raman spectroscopy nanoplatforms

Substrate development in surface-enhanced Raman spectroscopy (SERS) continues to attract research interest. In order to determine performance metrics, researchers in foundational SERS studies use a variety of experimental means to characterize the nature of substrates. However, often this process would appear to be performed indiscriminately without consideration for the physical scale of the enhancement phenomena. Herein, we differentiate between SERS substrates whose primary enhancing structures are on the hundreds of nanometer scale (analytical SERS nanosubstrates) and those whose main mechanism derives from nanometric-sized gaps (hot-spot dominated SERS substrates), assessing the utility of various characterization methods for each substrate class. In this context, characterization approaches in white-light spectroscopy, electron beam methods, and scanning probe spectroscopies are reviewed. Tip-enhanced Raman spectroscopy, wavelength-scanned SERS studies, and the impact of surface hydrophobicity are also discussed. Conclusions are thus drawn on the applicability of each characterization technique regarding amenability for SERS experiments that have features at different length scales. For instance, while white light spectroscopy can provide an indication of the plasmon resonances associated with 10 s-100 s nm-scale structures, it may not reveal information about finer surface texturing on the true nm-scale, critical for SERS' sensitivity, and in need of investigation via scanning probe techniques.

Surface-enhanced Raman spectroscopy as a powerful method for the analysis of Chinese herbal medicines

Chinese herbal medicines (CHMs) derived from nature have received increasing attention and become more popular. Due to their diverse production processes, complex ingredients, and different storage conditions, it is highly desirable to develop simple, rapid, efficient and trace detection methods to ensure the drug quality. Surface-enhanced Raman spectroscopy has the advantages of being time-saving, non-destructive, usable in aqueous environments, and highly compatible with various biomolecular samples, providing a promising analytical method for CHM. In this review, we outline the major advances in the application of SERS to the identification of raw materials, detection of bioactive constituents, characterization of adulterants, and detection of contaminants. This clearly shows that SERS has strong potential in the quality control of CHM, which greatly promotes the modernization of CHM.

SERS-active substrates using DVD-R coated in silver thin films: A preliminary study for detection of commercial glyphosate

Glyphosate (GLP) is the herbicide with the highest level of global commercialization and historical use. Even though numerous studies have found this substance to be harmless, current research demonstrates that GLP might affect human health. For this reason, researcher efforts are concentrating on alternatives for analytical quantification, such as Surface Enhanced Raman Spectroscopy (SERS). In this work, a DVD-R@AgNPs SERS substrate was produced by the Cathodic Cage Plasma Deposition (CCPD) technique, which allowed a thin film layer deposition of silver nanoparticles (AgNPs) on the PC grating structure from Digital Video/Versatile Disc Recordable (DVD-R). Scanning Electron Microscopy with energy-dispersive X-ray spectroscopy was used to characterize the substrate and chemical changes on the surface after AgNPs deposition. The DVD-R@AgNPs substrate was used to detect standard crystal violet (CV), GLP, and RoundupTM GLP (GLP-RU) using Raman Spectroscopy. The CV was used as a control sample for SERS measurement, allowing the calculation of the substrate enhancement factor, which was in the order of ∼ 105. To evaluate the efficiency of the SERS substrate, the limit of detection was calculated and showed values of ∼ 10-10 mol/L for CV, 10-7 and 10-8 mol/L for GLP, and 10-6 mol/L for GLP-RU. Thus, the DVD-R@AgNPs SERS sensor is a low-cost substrate that analyzes traces of pesticides such as commercial GLP, demonstrating high SERS sensitivities and many applications.

Advances in surface-enhanced Raman spectroscopy-based sensors for detection of various biomarkers

Surface enhanced Raman spectroscopy (SERS) allows the ultrasensitive detection of analytes present in traces or even single molecule levels by the generation of electromagnetic fields. It is a powerful vibrational spectroscopic method that is capable to detect traces of chemical and biological analytes. SERS technique is involved in the extremely sophisticated studies of molecules with high specificity and sensitivity. In the vicinity of nanomaterials decorated surfaces, SERS can monitor extremely low concentrations of analytes in a non-destructive manner with narrow line widths. This review article is focused on some recently developed SERS-based sensors for distinct types of analytes like disease-related biomarkers, organic and inorganic molecules, various toxins, dyes, pesticides, bacteria as well as single molecules. This study aims to enlighten the arising sensing approaches based on the SERS technique. Apart from this, some basics of the SERS technique like their mechanism, detection strategy, and involvement of some specific nanomaterials are also highlighted herein. Finally, the study concluded with some discussion of applications of SERS in various fields like food and environmental analysis.

Ultralow-background SERS substrates for reliable identification of organic pollutants and degradation intermediates

Chemical methods for preparing SERS substrates have the advantages of low cost and high productivity, but the strong background signals from the substrate greatly limit their applications in characterization and identification of organic compounds. Herein, we developed a one-step synthesis method to prepare silver nanoparticle substrates with ultralow SERS background using anionic ligands as stabilizing agents and applied the SERS substrate for the reliable and reproducible identification of typical organic pollutants and corresponding degradation intermediates. The synthesis method shows excellent universality to different reducing agents cooperating with different anionic ligands (Cl-, Br-, I-, SCN-). As model applications, the machine learning algorithm can realize the precise prediction of six organophosphorus pesticides and eight sulfonamide antibiotics with 100% accuracy based on SERS training data. More importantly, the ultralow-background SERS substrate enables one to detect and identify the time-dependent degradation intermediates of organophosphorus pesticides by combining them with density functional theory (DFT) calculations. All the results indicate that the ultralow-background SERS substrate will greatly push the development of SERS characterization applications.

Controlling the sensitivity and selectivity for the detection of nitro-based explosives by modulating the electronic substituents on the ligand of AIPE-active cyclometalated iridium(III) complexes

Nitroaromatic compounds are extremely explosive materials that pose a national security risk and raise environmental concerns. The design and development of sensitive and selective compounds for explosive materials are highly desirable. 'Aggregation-Induced Emission' (AIE) active materials are best suited for sensing purposes because of their sensitivity, fast detection time, and easy operation. By rationally incorporating substituents on the cyclometalated (C^N) ligand, four different AIE active iridium(III) based monocyclometalated complexes with the general formula [Ir(PPh3)2(H)(Cl)(C^N)] were synthesized. The phenyl ring of the phenyl pyridine cyclometalated portion of an iridium(III) complex was substituted with the right substituents to adjust the FMO levels thus, leading to appropriate alignment of the energy levels. Each of the resulting complexes displayed a significant property known as 'Aggregation-Induced Phosphorescent Emission' (AIPE). The complexes were subjected to structural characterization, electrochemical analysis, and photophysical property studies. The synthesized complexes were employed for the detection of aromatic nitro explosive compounds such as trinitrophenol (TNP) and trinitrotoluene (TNT) in the aqueous phase with a high degree of sensitivity. The sensing capabilities of each complex were assessed for these nitro explosive compounds and compared to those of the unsubstituted iridium(III) complex (M). Notably, the best limits of detection for TNP and TNT have been achieved with iridium(III) complexes [M1 (489 pM) and M3 (3.6 nM)] within the literature reported until now. For detecting picric acid with M1, FRET was found to be the potential mechanism, and for TNT, PET was found to be the cause of emission quenching by M3. Furthermore, for low-cost detection, filter paper-based sensing was also found effective for each complex. Real-field sensing of PA in soil samples was also performed.

A SERS bioassay based on vancomycin-modified PEI-interlayered nanocomposite and aptamer-functionalized SERS tags for synchronous detection of Acinetobacter baumannii and Klebsiella pneumoniae

Klebsiella pneumoniae (KP) and Acinetobacter baumannii (AB) are two important gram-negative bacteria that cause pneumonia and have been recently known to be associated with food. The rapid detection of these pathogens in food is important to minimize their colonization of the gut and stop new threats of the disease from spreading across the food chain. Herein, a double-edged sword aptasensor was developed for the synchronous detection of KP and AB in food and clinical samples. A highly sensitive, selective, specific, and synchronous detection of the target bacteria was achieved, and the limit of detection (LOD) was 10 cells/mL with a liner range of 50 to 10⁵ cells/mL. The total assay time was 1.5 h. This study does not only provide a new tool for the detection of the target bacteria, but also serves as a promising tool for food safety and pneumonia diagnosis.

SERS performance of GaN/Ag substrates fabricated by Ag coating of GaN platforms

The results of comparative studies on the fabrication and characterization of GaN/Ag substrates using pulsed laser deposition (PLD) and magnetron sputtering (MS) and their evaluation as potential substrates for surface-enhanced Raman spectroscopy (SERS) are reported. Ag layers of comparable thicknesses were deposited using PLD and MS on nanostructured GaN platforms. All fabricated SERS substrates were examined regarding their optical properties using UV-vis spectroscopy and regarding their morphology using scanning electron microscopy. SERS properties of the fabricated GaN/Ag substrates were evaluated by measuring SERS spectra of 4-mercaptobenzoic acid molecules adsorbed on them. For all PLD-made GaN/Ag substrates, the estimated enhancement factors were higher than for MS-made substrates with a comparable thickness of the Ag layer. In the best case, the PLD-made GaN/Ag substrate exhibited an approximately 4.4 times higher enhancement factor than the best MS-made substrate.

Enhancement of the signal-to-noise ratio in fiber-optics based SERS detection by rough-cutting the end surface

Fiber-optics based surface-enhanced Raman scattering (FO-SERS) has an unique advantage of being able to remotely detect analyte molecules because the fiber length can be adjusted as desired. However, the Raman signal of the fiber-optic material is so strong that it is an important challenge in utilization of optical fiber for remote SERS sensing. In this study, we found that the background noise signal was greatly reduced by ca. 32% compared to conventional fiber-optics with a flat surface cut. To confirm the feasibility of FO-SERS detection, silver nanoparticles labeled with 4-fluorobenzenethiol were attached onto the end surface of an optical fiber to form a SERS-signaling substrate. The SERS intensity from the fiber-optics with a roughened surface as SERS substrate was increased significantly with respect to signal-to-noise ratio (SNR) values compared to optical fibers with flat end surface. This result implies that the fiber-optics with roughened surface could be used as an efficient alternative for FO-SERS sensing platform.

Plasmonic 3-D wrinkled polymeric shrink film-based SERS substrates for pesticide detection on real-world surfaces

The continuous and excessive use of agrochemicals for crop improvement and protection has raised widespread concern, as they exert adverse effects on human health and the local environment. Surface Enhanced Raman Spectroscopy (SERS) provides a method for the quick identification and detection of such hazardous substances in a short amount of time due to its properties of being robust, accurate, sensitive and non-destructive. Despite the fact that several SERS substrates have been developed, the bulk of them are ineffective in terms of sample collection or providing reproducible results. In this study, we showed that a 3-D wrinkled polymeric heat-shrink film coated with Au bead@Ag nanorods (silver nanorods) serves as a potential SERS substrate for trace analysis. The surface of the heat-shrink film became wrinkled after heating, and this, along with the spatial arrangement of nanoparticles, significantly enhances the Raman signal of the analytes. The fabricated SERS substrate was able to sense two model analytes 1,4-benzenedithiol (BDT) and 2-naphthalenethiol (NT) up to 10^-13 M and 10^-11 M concentrations. The fabricated substrate was also effective in sensing thiram down to 10^-13 M concentration. Additionally, the SERS substrate was applied in a real-world setting for the detection of the pesticide thiram spiked onto apple skin surfaces. To collect the thiram residues, the substrate was simply swabbed across the surface of the apple. This allowed for the detection of thiram at concentrations as low as 10^-9 M (1 ppb). The fabricated SERS substrate can thus detect analytes in an efficient, sensitive, dependable and accurate manner, allowing for the sensing of trace analytes like pesticides in a real-world environment.

Optical Methods for Label-Free Detection of Bacteria

Pathogenic bacteria are the leading causes of food-borne and water-borne infections, and one of the most serious public threats. Traditional bacterial detection techniques, including plate culture, polymerase chain reaction, and enzyme-linked immunosorbent assay are time-consuming, while hindering precise therapy initiation. Thus, rapid detection of bacteria is of vital clinical importance in reducing the misuse of antibiotics. Among the most recently developed methods, the label-free optical approach is one of the most promising methods that is able to address this challenge due to its rapidity, simplicity, and relatively low-cost. This paper reviews optical methods such as surface-enhanced Raman scattering spectroscopy, surface plasmon resonance, and dark-field microscopic imaging techniques for the rapid detection of pathogenic bacteria in a label-free manner. The advantages and disadvantages of these label-free technologies for bacterial detection are summarized in order to promote their application for rapid bacterial detection in source-limited environments and for drug resistance assessments.

GLAD Based Advanced Nanostructures for Diversified Biosensing Applications: Recent Progress

Glancing angle deposition (GLAD) is a technique for the fabrication of sculpted micro- and nanostructures under the conditions of oblique vapor flux incident and limited adatom diffusion. GLAD-based nanostructures are emerging platforms with broad sensing applications due to their high sensitivity, enhanced optical and catalytic properties, periodicity, and controlled morphology. GLAD-fabricated nanochips and substrates for chemical and biosensing applications are replacing conventionally used nanomaterials due to their broad scope, ease of fabrication, controlled growth parameters, and hence, sensing abilities. This review focuses on recent advances in the diverse nanostructures fabricated via GLAD and their applications in the biomedical field. The effects of morphology and deposition conditions on GLAD structures, their biosensing capability, and the use of these nanostructures for various biosensing applications such as surface plasmon resonance (SPR), fluorescence, surface-enhanced Raman spectroscopy (SERS), and colorimetric- and wettability-based bio-detection will be discussed in detail. GLAD has also found diverse applications in the case of molecular imaging techniques such as fluorescence, super-resolution, and photoacoustic imaging. In addition, some in vivo applications, such as drug delivery, have been discussed. Furthermore, we will also provide an overview of the status of GLAD technology as well as future challenges associated with GLAD-based nanostructures in the mentioned areas.

Rapid Detection of Malathion, Phoxim and Thiram on Orange Surfaces Using Ag Nanoparticle Modified PDMS as Surface-Enhanced Raman Spectroscopy Substrate

Malathion, phoxim, and thiram are organophosphates and organosulfur pesticides widely used in agricultural products. The residues of these pesticides present a direct threat to human health. Rapid and on-site detection is critical for minimizing such risks. In this work, a simple approach was introduced using a flexible surface-enhanced Raman spectroscopy (SERS) substrate. The prepared Ag nanoparticles-polydimethylsiloxane (AgNPs-PDMS) substrate showed high SERS activity, good precision (relative standard deviation = 5.33%), and stability (30 days) after optimization. For target pesticides, the linear relationship between characteristic SERS bands and concentrations were achieved in the range of 10~1000, 100~5000, and 50~5000 μg L^-1 with LODs down to 3.62, 41.46, and 15.69 μg L^-1 for thiram, malathion, and phoxim, respectively. Moreover, SERS spectra of mixed samples indicated that three pesticides can be identified simultaneously, with recovery rates between 96.5 ± 3.3% and 118.9 ± 2.4%, thus providing an ideal platform for detecting more than one target. Pesticide residues on orange surfaces can be simply determined through swabbing with the flexible substrate before acquiring the SERS signal. This study demonstrated that the prepared substrate can be used for the rapid detection of pesticides on real samples. Overall, this method greatly simplified the pre-treatment procedure, thus serving as a promising analytical tool for rapid and nondestructive screening of malathion, phoxim, and thiram on various agricultural products.

Plasmonic Gold Trimers and Dimers with Air-Filled Nanogaps

The subwavelength confinement of light energy in the nanogaps formed between adjacent plasmonic nanostructures provides the foundational basis for nanophotonic applications. Within this realm, air-filled nanogaps are of central importance because they present a cavity where application-specific nanoscale objects can reside. When forming such configurations on substrate surfaces, there is an inherent difficulty in that the most technologically relevant nanogap widths require closely spaced nanostructures separated by distances that are inaccessible through standard electron-beam lithography techniques. Herein, we demonstrate an assembly route for the fabrication of aligned plasmonic gold trimers with air-filled vertical nanogaps having widths that are defined with spatial controls that exceed those of lithographic processes. The devised procedure uses a sacrificial oxide layer to define the nanogap, a glancing angle deposition to impose a directionality on trimer formation, and a sacrificial antimony layer whose sublimation regulates the gold assembly process. By further implementing a benchtop nanoimprint lithography process and a glancing angle ion milling procedure as additional controls over the assembly, it is possible to deterministically position trimers in periodic arrays and extend the assembly process to dimer formation. The optical response of the structures, which is characterized using polarization-dependent spectroscopy, surface-enhanced Raman scattering, and refractive index sensitivity measurements, shows properties that are consistent with simulation. This work, hence, forwards the wafer-based processing techniques needed to form air-filled nanogaps and place plasmonic energy at site-specific locations.

Surface Analysis Techniques in Forensic Science: Successes, Challenges, and Opportunities for Operational Deployment

Surface analysis techniques have rapidly evolved in the last decade. Some of these are already routinely used in forensics, such as for the detection of gunshot residue or for glass analysis. Some surface analysis approaches are attractive for their portability to the crime scene. Others can be very helpful in forensic laboratories owing to their high spatial resolution, analyte coverage, speed, and specificity. Despite this, many proposed applications of the techniques have not yet led to operational deployment. Here, we explore the application of these techniques to the most important traces commonly found in forensic casework. We highlight where there is potential to add value and outline the progress that is needed to achieve operational deployment. We consider within the scope of this review surface mass spectrometry, surface spectroscopy, and surface X-ray spectrometry. We show how these tools show great promise for the analysis of fingerprints, hair, drugs, explosives, and microtraces.

Inclusive DFT insight into sensing mechanism of cyclotetrapyrole towards lung irritants

The development of smart sensing devices for toxic analytes detection especially lung irritants is much essential. The cyclic conducting polymers having infinite π-conjugation are proved to be highly sensitive for toxic analytes. Herein, by using the DFT approach, we investigated the sensing mechanism of cyclotetrapyrole (CTPy) for accurate detection of phosgene, diphosgene, chloropicrin and chlorine at the B3LYP-D3/6-31 + G (d, p) level. The calculated interaction energies show the physisorption of analytes over the CTPy surface. Natural bond orbital (NBO) and charge decomposition (CDA) analyses predict charge transfer interactions in the complexes. The reduced density gradient (RDG) approach reveals that hydrogen bonding interactions dominate in the complexes. The sensitivity of CTPy towards lung irritants is further illustrated by the reduction in HOMO-LUMO energy gaps, red shifting of [Formula: see text] in UV-Visible spectra. Density of state (DOS) analysis affirm that enhanced conductivity upon complexation is due to the origination of new energy states in occupied and virtual orbitals nearer to the Fermi level. Moreover, PDOS spectra show that CTPy primarily contributes to the energy of HOMO. The outcome of the current study depicts appreciable sensitivity of CTPy towards lung irritants. Moreover, the competing role of naturally occurring atmospheric water is also investigated. We believe that the upshot of the current findings and their forecasts will provide useful guidelines for an experimentalist to design highly sensitive sensors for toxic analytes using CTPy. HIGHLIGHTS: • The highest QNBO transfer towards the analyte (- 0.121) is seen in the chlorine@CTPy complex. • The highest reduction in Eg (61%) between occupied and virtual orbitals is noticed in chlorine@CTPy. • The orbital overlap results in a 41% red shifting of [Formula: see text] in chlorine@CTPy. • Cyclotetrapyrole is highly sensitive for chlorine.

Cellulose Acetate-Based Plasmonic Crystals for Surface-Enhanced Raman and Fluorescence Spectroscopy

In order to meet environmental concerns, there is an increasing demand for biodegradable and sustainable materials in many areas, including photonics. Cellulose and its derivatives are potentially eco-friendly alternatives to conventional plastics, because of their abundance and lower environmental impact. Here, we report the fabrication of plasmonic structures by molding cellulose acetate into submicrometric periodic lattices, using soft lithography. The fabricated platforms can be used for the enhancement of Raman and fluorescence signals of a range of analytes including a model immunoassay utilizing a streptavidin-conjugated dye, which is characterized by a 23-fold enhancement in fluorescence signal intensity, which shows the potential of the platform to be further used for the assay-based development of diagnostic tools.

Dual "Static and Dynamic" Fluorescence Quenching Mechanisms Based Detection of TNT via a Cationic Conjugated Polymer

A rare combination of dual static and dynamic fluorescence quenching mechanisms is reported, while sensing the nitroexplosive trinitrotoluene (TNT) in water by a cationic conjugated copolymer PFPy. Since the fluorophore PFPy interacts with TNT in both ground state as well as the excited states, a greater extent of interaction is facilitated between PFPy and the TNT, as a result of which the magnitude of the signal is amplified remarkably. The existence of these collective sensing mechanisms provides additional advantages to the sensing process and enhances the sensing parameters, such as LoD and highly competitive sensing processes in natural water bodies irrespective of the pH and at ambient conditions. These outcomes involving dual sensing mechanistic pathways expand the scope of developing efficient sensing probes for toxic chemical analyte and biomarker detection, preventing environmental pollution and strengthening security at sensitive locations while assisting in early diagnosis of disease biomarkers.

Microfluidics and surface-enhanced Raman spectroscopy, a win-win combination?

With the continuous development in nanoscience and nanotechnology, analytical techniques like surface-enhanced Raman spectroscopy (SERS) render structural and chemical information of a variety of analyte molecules in ultra-low concentration. Although this technique is making significant progress in various fields, the reproducibility of SERS measurements and sensitivity towards small molecules are still daunting challenges. In this regard, microfluidic surface-enhanced Raman spectroscopy (MF-SERS) is well on its way to join the toolbox of analytical chemists. This review article explains how MF-SERS is becoming a powerful tool in analytical chemistry. We critically present the developments in SERS substrates for microfluidic devices and how these substrates in microfluidic channels can improve the SERS sensitivity, reproducibility, and detection limit. We then introduce the building materials for microfluidic platforms and their types such as droplet, centrifugal, and digital microfluidics. Finally, we enumerate some challenges and future directions in microfluidic SERS. Overall, this article showcases the potential and versatility of microfluidic SERS in overcoming the inherent issues in the SERS technique and also discusses the advantage of adding SERS to the arsenal of microfluidics.

Flexible 2D nanocellulose-based SERS substrate for pesticide residue detection

Nanocellulose holds considerable promise as an effective surface-enhanced Raman scattering (SERS) substrate for sensitive detection of trace targets. Flexible and high-sensitivity two-dimensional (2D) SERS substrates based on nanocrystalline cellulose (CNC) film were successfully developed via self assembly of two plasma nanoparticles: gold nanoflowers (AuNFs) and silver-coated gold nanocubes (Au@AgNCs). The loading process allows the precise control of nanoparticle distribution density and uniformity on CNC film, which are closely related to the plasma coupling effect between particles. The obtained CNC/Au@AgNC flexible two-dimensional substrate could sensitively detect pesticide residues on apple surface, and the detection limits (LOD) of dimethoate and acetamiprid were 4.1 and 10.7 μg/L, respectively. In addition, Raman signal intensity showed a good linear relationship with pesticide concentration in the range of 10-100 μg/L, which provided great potential for high sensitivity and field detection of dangerous targets.

Clusters-based silver nanorings: An active substrate for surface-enhanced Raman scattering

Plasmonic nanostructures, particularly irregular surfaces of ring-like silver (Ag) nanostructures are promising candidates in surface-enhanced Raman scattering (SERS) spectroscopy. In this work, clusters-based Ag nanorings have been fabricated and characterized as SERS-active substrates. The rim of the as-fabricated Ag nanorings was found neither discontinuous nor linear aggregation of nanoparticles. High-resolution field emission scanning electron microscopy (FESEM) revealed that the individual constituent clusters were different from each other, particularly in terms of size and shape in addition to the cases how such clusters were emerged as the edge of the nanoring. Considering the dimensions of the clusters and the arrangement of such clusters as nanorings, it was speculated that the local electromagnetic (EM) near-field distributions would excel and thus enhanced SERS signals would be achieved. Indeed, the inherent features of the nanorings facilitated to achieve SERS enhancement factors as high as 2.1 × 10⁴. SERS-activity of as-fabricated Ag nanorings was confirmed using Rhodamine 6G (R6G) as Raman-active dyes and the enhancement was compared to those obtained from R6G adsorbed on Ag-ZnO/Glass and ZnO/Glass. To the best of our knowledge, this is the first attempt to explore the impact of localized EM near-field within the segments of nanorings through SERS spectroscopy. A model was designed resembling the nanorings under this investigation to simulate EM near-field distributions by finite difference time domain (FDTD) analysis. The dimensions of the model geometry were chosen according to the observations achieved by FESEM. To simplify the simulations, nanoobjects were considered spherical and organized in a periodic fashion, although the constituent clusters of Ag nanorings were found irregular in shape and arrangement. Since EM near-field distribution highly depends on interparticle gaps, three scenarios were implemented, such as, small gap in between two adjacent nanoobjects and adjacent nanoobjects in touch and overlapped. Each configuration was simulated and EM near-field distribution was extracted for s-, p- and 45⁰ of incident polarizations followed by a plausible correlation to SERS enhancements. Such correlated investigations as well as clusters-based Ag nanorings not only inspire the ones to look for cost-effective SERS-active substrate, but also understand the underlying EM mechanism in SERS enhancements.

Hybrid Sol-Gel Surface-Enhanced Raman Sensor for Xylene Detection in Solution

This paper reports on the fabrication and characterization of a plasmonic/sol-gel sensor for the detection of aromatic molecules. The sol-gel film was engineered using polysilsesquioxanes groups to capture the analyte, through π-π interaction, and to concentrate it close to the plasmonic surface, where Raman amplification occurs. Xylene was chosen as an analyte to test the sensor. It belongs to the general class of volatile organic compounds and can be found in water or in the atmosphere as pollutants released from a variety of processes; its detection with SERS is typically challenging, due to its low affinity toward metallic surfaces. The identification of xylene was verified in comparison with that of other aromatic molecules, such as benzene and toluene. Investigations were carried out on solutions of xylene in cyclohexane, using concentrations in the range from 0 to 800 mM, to evaluate the limit of detection (LOD) of about 40 mM.

Colorimetric optical nanosensors for trace explosive detection using metal nanoparticles: advances, pitfalls, and future perspective

Warfare threats and acts of terror are challenging situations encountered by defense agencies across the globe and are of growing concern to the general public, and security-minded policy makers. Detecting ultra-low quantities of explosive compounds in remote locations or under harsh conditions for anti-terror purposes as well as the environmental monitoring of residual or discarded explosives in soil, remains a major challenge. The use of metal nanoparticles (NPs) for trace explosive detection has drawn considerable interest in recent years. For nano-based explosive sensor devices to meet real-life operational demands, analytical parameters such as, long-shelf life, stability under harsh conditions, ease-of-use, high sensitivity, excellent selectivity, and rapid signal response must be met. Generally, the analytical performance of colorimetric-based nanosensor systems is strongly dependent on the surface properties of the nanomaterial used in the colorimetric assay. The size and shape properties of metal NPs, surface functionalisation efficiency, and assay fabrication methods, are factors that influence the efficacy of colorimetric explosive nanosensor systems. This review reports on the design and analytical performances of colorimetric explosive sensor systems using metal NPs as optical signal transducers. The challenges of trace explosive detection, advances in metal NP colorimetric explosive design, limitations of each methods, and possible strategies to mitigate the problems are discussed.

Fabrication of low cost highly structured silver capped aluminium nanorods as SERS substrate for the detection of biological pathogens

We report the fabrication of low cost highly structured silver (Ag) capped aluminium (Al) nanorods (NRs) as surface enhanced Raman spectroscopy (SERS) substrate utilising the glancing angle deposition technique. The nano-capping of silver onto the Al NRs can concentrate the local electric field within the minimal volume that can serve as hotspots. The average size of the Ag nanocaps was 50 nm. The newly proposed nanoporous Ag capped Al NRs as SERS substrate could detect the Raman signal of rhodamine 6G (R6G) up to 10^-15molar concentration. The significant enhancement in the Raman signal of 10⁷was achieved for Ag capped Al NRs considering R6G as a probe molecule. Using the developed SERS substrate, we recorded Raman spectra forEscherichia colibacteria with its concentration varying from 10⁸colony forming units per ml (CFU ml^-1) up to 10²CFU ml^-1. All the reported Raman spectra were acquired by a portable handheld Raman spectrometer. Hence, this newly proposed low cost, effective SERS substrate can be used commercially for the onsite detection of clinical pathogens. The 3D finite difference time domain simulation model was performed for Ag capped Al nanostructure to understand the generation of hotspots. The simulated results show excellent agreement with the experimental results. We fabricated uncapped Ag nanorods of similar dimensions and performed the experimental measurements and simulations for comparison. We found a significant enhancement in Ag capped Al NRs compared to the long Ag NRs. The description of the Raman signal enhancement has been elaborated.

Explosive vapour/particles detection using SERS substrates and a hand-held Raman detector

We developed and optimized surface-enhanced Raman spectrometry (SERS) methods for trace analysis of explosive vapour and particles using a hand-held Raman spectrometer in the field. At first, limits of detection (LODs) using SERS methods based on a colloidal suspension of gold nanoparticles were measured under alkaline conditions and are as follows: pentaerythritol tetranitrate (PETN) (1.5 × 10⁻⁶ M, 6.9 ng), 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX), 8.1 × 10⁻⁶ M, 35 ng; urea nitrate (UN), 9.2 × 10⁻⁴ M, 165 ng; 2,4,6-trinitrotoluene (TNT), 1.1 × 10⁻⁷ M, 0.35 ng. We developed SERS substrates that demonstrate the wide applicability of this technique for use in the field for explosive vapour and particles adsorbed on a surface based on Au nanoparticles that were optimal for the detection of the target materials in solution. Au nanoparticles were modified onto quartz fibres or a polyurethane sponge for vapour/particles detection. SERS detection of vapours of 2,4-dinitrotoluene (2,4-DNT) and 1,3-dinitrobenzene (1,3-DNB) was shown by sampling vapours onto Au-modified quartz fibres followed by hand-held Raman analysis with estimated minimum detection levels of 3.6 ng and 54 ng, respectively. The detection of 2,4-DNT using sponge-based SERS decorated with Au nanoparticles was also demonstrated; however, the sensitivity was lower than that observed using quartz fibres. The detection of TNT on a surface was performed by utilizing quartz-fibres precoated with alumina and modified with Au nanoparticles, and the detection of 10 μg (0.53 μg cm⁻²) of TNT was demonstrated.

We developed and optimized surface-enhanced Raman spectrometry (SERS) methods for trace analysis of explosive vapour and particles using a hand-held Raman spectrometer in the field.

Si-doped graphene nanosheets as a metal-free catalyst for electrochemical detection of nitroaromatic explosives

Si-doped graphene nanosheets (SiGNS) have been successfully constructed via high temperature annealing of graphene oxide and tetraethoxysilane mixture in a sealed glass ampoule. The Si atoms doped into graphene's carbon network mainly existed as C₃-Si-O and C₂-Si-O₂ configurations. The as-prepared SiGNS exhibited excellent electrochemical detection ability to nitroaromatic compounds in 0.1 M phosphoric acid buffer solution (PBS, pH = 8.0) via an electrochemical catalytic process. Five nitroaromatic compounds, including nitrobenzene, 2-nitrotoluene, 4-nitrotoluene, 2, 4-dinitrotoluene and 2, 4, 6-trinitrotoluene, were taken as the analyte to demonstrate the electrochemical catalytic ability of SiGNS. Density functional theory (DFT) calculation was carried out to explore the electrochemical catalytic mechanism of SiGNS. A hydrogen bond mediated electrochemical catalytic mechanism was proposed. Both the excellent electrical conductivity and the rich surface hydroxyl groups enhanced the electrochemical detection ability of SiGNS to nitroaromatic compounds. Si atoms in SiGNS played a key role for the excellent electrochemical detection ability of SiGNS due to most of the surface hydroxyl groups anchored on the Si atoms.

Plasmonic Pollen Grain Nanostructures: A Three-Dimensional Surface-Enhanced Raman Scattering (SERS)-Active Substrate

A new route has been developed to design plasmonic pollen grain-like nanostructures (PGNSs) as surface-enhanced Raman scattering (SERS)-active substrate. The nanostructures consisting of silver (Ag) and gold (Au) nanoparticles along with zinc oxide (ZnO) nanoclusters as spacers were found highly SERS-active. The morphology of PGNSs and those obtained in the intermediate stage along with each elemental evolution has been investigated by a high-resolution field emission scanning electron microscopy. The optical band gaps and crystal structure have been identified by UV-vis absorption and X-ray powder diffraction (XRD) measurements, respectively. For PGNSs specimen, three distinct absorption bands related to constituent elements Ag, Au, and ZnO were observed, whereas XRD peaks confirmed the existence of Ag, Au, and ZnO within the composition of PGNSs. SERS-activity of PGNSs was confirmed using Rhodamine 6G (R6G) as Raman-active dyes. Air-cooled solid-state laser kits of 532 nm were used as excitation sources in SERS measurements. SERS enhancement factor was estimated for PGNSs specimen and was found as high as 3.5×10⁶ . Finite difference time domain analysis was carried out to correlate the electromagnetic (EM) near-field distributions with the experiment results achieved under this investigation. EM near-field distributions at different planes were extracted for s-, p- and 45° of incident polarizations. EM near-field distributions for such nanostructures as well as current density distributions under different circumstances were demonstrated and plausible scenarios were elucidated given SERS enhancements. Such generic fabrication route as well as correlated investigation is not only indispensable to realize the potential of SERS applications but also unveil the underneath plasmonic characteristics of complex SERS-active nanostructures.

Plasmonic MOF Thin Films with Raman Internal Standard for Fast and Ultrasensitive SERS Detection of Chemical Warfare Agents in Ambient Air

Surface-enhanced Raman scattering (SERS) is a powerful spectroscopic technique for selective detection and quantification of molecules at extremely low concentrations. However, practical SERS applications for gaseous chemicals with small cross section is still in its early stages. We herein report a plasmonic-sorbent thin-film platform with integrated Raman internal standard with outstanding SERS sensing capabilities for chemical warfare agents (CWA) simulants. The thin film is constituted of close-packed core-shell Au@Ag nanorods individually encapsulated within a ZIF-8 framework (Au@Ag@ZIF-8). While the Au@Ag nanoparticles amplify the Raman signal of molecules located near their surface, the ZIF-8 framework plays a key role in the trapping of the dimethyl methylphosphonate (DMMP) or 2-chloroethyl ethyl sulfide (CEES) from the gas phase as well as Raman internal standard. The underlying adsorption mechanism of the molecules within the ZIF-8 framework as well as the interaction between DMMP and Ag surface are investigated by computational simulations. Outstanding SERS sensing capabilities of Au@Ag@ZIF-8 thin films, in terms of response time, quantification limit, reproducibility, and recyclability, are demonstrated for dimethyl methylphosphonate (DMMP) and 2-chloroethyl ethyl sulfide (CEES), selected as CWA simulants of sarin gas and mustard gas, respectively. A limit of detection (LOD) of 0.2 ppbV is reported for DMMP. Additionally, experiments performed with portable Raman equipment detect 2.5 ppmV for DMMP in ambient air and 76 ppbV for CEES in N₂, with response times of 21 and 54 s, respectively. This proof of concept opens the door for handheld SERS-based gas sensing at ultralow concentrations in practical applications, such as homeland security, critical infrastructure protection, chemical process monitoring, or personalized medicine.

Study of photo induced charge transfer mechanism of PEDOT with nitro groups of RDX, HMX and TNT explosives using anti-stokes and stokes Raman lines ratios

The paper reports the charge transfer mechanism between poly (3,4-ethylenedioxythiophene) (PEDOT) and high energy materials such as RDX, HMX and TNT, respectively in terms of ratios of anti-stokes (AS) and stokes(S) Raman lines of NO₂ bands. Generally it works as an effective sensing medium for the detection of explosives when mixed in an equal proportion and are subjected to 532 nm wavelength without any chemical treatment [1]. The pristine PEDOT is less sensitive to 532 nm wavelength (2.33 eV) but influences the Raman S and AS lines of explosives in the mixture. The study also reveals that a small quantity (one milligram) of PEDOT is sufficient to initiate the positive charge transfer mechanism between its oxidized state to the lone pairs of electrons on the oxygen atoms of the nitro group of the explosive molecules. Consequently, the intensity of the Raman spectra of RDX, HMX and TNT is dropped by an order of 22.5, 11.45 and 17.2 times, respectively along with the shift of the NO₂ vibrational modes. It is also attributed to Photon-electron-phonon interaction. Finally, we have estimated the reduced mass of the functional group to ascertain the force constant and the intensity ratios of AS /S lines to confirm the charge transfer mechanism. The effect of charge transfer mechanism is also reflected in drastic change in transmission /absorption characteristics of FTIR spectra of same PEDOT and explosive mixtures.

Tetraphenylethene probe based fluorescent silica nanoparticles for the selective detection of nitroaromatic explosives

A simple and sensitive fluorometric method is developed utilizing aggregation-induced emission probe based silica nanoparticles for the detection of nitroaromatic explosives. A positively charged tetraphenylethene based probe (TPE-C2-2+) is doped into silica nanoparticles exploiting electrostatic interactions to produce TPE-SiO₂ nanoparticles with a uniform particle size. The TPE-SiO₂ nanoparticles exhibit strong fluorescence emission due to the aggregation-induced emission (AIE) effect of the doped TPE probe. The fluorescence emission of TPE-SiO₂ offers quantitative and sensitive response to picric acid (PA), 2,4-dinitrotoluene (DNT) and 2,4,6-trinitrotoluene (TNT) which are used as model examples of nitroaromatic compounds. The fluorescence spectroscopy results show that the fluorescence emission of TPE-SiO₂ was greatly quenched in the presence of the electron-poor nitroaromatic compounds due to the inner filter effect (IFE) and possibly the contact quenching mechanism. TPE-SiO₂ nanoparticles show better sensitivity towards PA and could detect PA down to 0.01 μM with a linear detection range of 0.1-50 μM. The increased chemical stability, efficient high sensitivity and simple synthesis of the TPE-SiO₂ nanoparticles demonstrate that they can be used as an excellent fluorescent probe for a wide range of electron-poor compounds, i.e. nitroaromatic compounds. Interference studies show that common interfering species with nitroexplosives such as acids, bases, volatile organic compounds, and salt solutions have a negligible effect during the sensing process.

Multiple reflections enhanced fiber-optic photoacoustic sensor for gas micro-leakage

A multiple reflections-enhanced fiber-optic photoacoustic (PA) gas sensor for gas micro-leakage is introduced. Multiple reflections of the excitation laser occur on the inner surface of a reflective ring to enhance the PA signal. The PA signal is obtained by measuring the deflection of the gold-coated poly (phenylene sulfide) (PPS) diaphragm with a Fabry-Perot interferometer (FPI). The second harmonic wavelength modulation spectrum (2f-WMS) technology can essentially eliminate the fundamental frequency noise generated by the wavelength-independent absorption of the reflective ring. Experimental results show that the PA signal can be effectively enhanced 11.7 times by the multiple reflections optical path compare with the double-pass optical path. The minimum detection limit of the system is achieved to be 23.6 ppb. The designed PA gas sensor is suited for remote detection of gas micro-leakage.

Recent progress in mycotoxins detection based on surface-enhanced Raman spectroscopy

Mycotoxins are toxic compounds naturally produced by certain types of fungi. The contamination of mycotoxins can occur on numerous foodstuffs, including cereals, nuts, fruits, and spices, and pose a major threat to humans and animals by causing acute and chronic toxic effects. In this regard, reliable techniques for accurate and sensitive detection of mycotoxins in agricultural products and food samples are urgently needed. As an advanced analytical tool, surface-enhanced Raman spectroscopy (SERS), presents several major advantages, such as ultrahigh sensitivity, rapid detection, fingerprint-type information, and miniaturized equipment. Benefiting from these merits, rapid growth has been observed under the topic of SERS-based mycotoxin detection. This review provides a comprehensive overview of the recent achievements in this area. The progress of SERS-based label-free detection, aptasensor, and immunosensor, as well as SERS combined with other techniques, has been summarized, and in-depth discussion of the remaining challenges has been provided, in order to inspire future development of translating the techniques invented in scientific laboratories into easy-to-operate analytic platforms for rapid detection of mycotoxins.

Multifunctional Flexible SERS Sensor on a Fixate Gel Pad: Capturing, Derivation, and Selective Picogram Indirect Detection of Explosive 2,2',4,4',6,6'-Hexanitrostilbene

2,2',4,4',6,6'-Hexanitrostilbene (HNS) is an explosive with better explosion performance than the well-known 2,4,6-trinitrotoluene (TNT). Surprisingly, unlike other nitroaromatic explosives, there are limited reports regarding the detection of the HNS, let alone sensing reports on surface residues. In this work, a multifunctional flexible SERS sensor was proposed for the indirect detection of HNS based on the transparent fixate gel pads. The sticky and flexible gel pad can effectively collect any HNS surface residues. The inherent amine groups within the gel pad of which the main ingredient is polyurethane can react with HNS to form the orange Meisenheimer-alike complex. The modification of Ag NPs with halide ions was screened for the best SERS performance. KI-modified-citrate-reduced Ag NPs showed selective but enormous SERS enhancement for the HNS derivative. The detection of HNS in the solution phase was explored, and a linear range of 0.01-25 ppm was achieved. The lowest detectable amount (LDA) of HNS was found to be 50 pg, making it one of the most sensitive methods in literature. It was successfully utilized for the HNS residues sensing on fingerprints and bags with LDAs of 5 and 200 ng, respectively. In addition, other explosives including TATB, LLM-105, RDX, HMX, FOX-7, and TNT were also examined to assess the selectivity of the fixate. It was found that the fixate showed excellent selectivity for HNS.

Highly fluorescent scandium-tetracarboxylate frameworks: selective detection of nitro-aromatic compounds, sensing mechanism, and their application

Recently, exploring new luminescent metal-organic frameworks (LMOFs) to selectively detect nitro-aromatic compounds (NACs) has been a hot topic of research. Simultaneously, it is still a challenging issue to understand the sensing mechanism of luminescent MOFs interacting with NACs at the molecular level. In this work, highly fluorescent Sc-tetracarboxylate frameworks (Sc-EBTC) have been successfully synthesized through a solvothermal method. The as-prepared Sc-EBTC crystals have good thermal stability, chemical stability as well as strong fluorescence (λ_ex = 320 nm and λ_em = 400 nm), and they can detect various NACs rapidly (as short as 30 s), selectively and efficiently by the "turn-off" fluorescence mechanism. The detection limits of Sc-EBTC toward 2,4-DNP and 4-NP are quantified to be 5.71 ppb and 6.26 ppb, respectively. Furthermore, to better understand the sensing mechanism, we attempt to use solid-state NMR and X-ray photoelectron spectroscopy to vividly characterize the charge transfer caused by the interaction between NAC molecules and the MOF at the molecular level. Additionally, test strips were made successfully for the practical detection of the NACs. This study demonstrates that the MOF constructed from the H₄EBTC ligands might be a promising candidate for the detection of trace NACs.

Biosensors for rapid detection of Salmonella in food: A review

Salmonella is one of the main causes of foodborne infectious diseases, posing a serious threat to public health. It can enter the food supply chain at various stages of production, processing, distribution, and marketing. High prevalence of Salmonella necessitates efficient and effective approaches for its identification, detection, and monitoring at an early stage. Because conventional methods based on plate counting and real-time polymerase chain reaction are time-consuming and laborious, novel rapid detection methods are urgently needed for in-field and on-line applications. Biosensors provide many advantages over conventional laboratory assays in terms of sensitivity, specificity, and accuracy, and show superiority in rapid response and potential portability. They are now recognized as promising alternative tools and one of the most on-site applicable and end user-accessible methods for rapid detection. In recent years, we have witnessed a flourishing of studies in the development of robust and elaborate biosensors for detection of Salmonella in food. This review aims to provide a comprehensive overview on Salmonella biosensors by highlighting different signal-transducing mechanisms (optical, electrochemical, piezoelectric, etc.) and critically analyzing its recent trends, particularly in combination with nanomaterials, microfluidics, portable instruments, and smartphones. Furthermore, current challenges are emphasized and future perspectives are discussed.

Plasmonic Sensors for Monitoring Biological and Chemical Threat Agents

Sensors are excellent options owing to their ability to figure out a large number of problems and challenges in several areas, including homeland security, defense, medicine, pharmacology, industry, environment, agriculture, food safety, and so on. Plasmonic sensors are used as detection devices that have important properties, such as rapid recognition, real-time analysis, no need labels, sensitive and selective sensing, portability, and, more importantly, simplicity in identifying target analytes. This review summarizes the state-of-art molecular recognition of biological and chemical threat agents. For this purpose, the principle of the plasmonic sensor is briefly explained and then the use of plasmonic sensors in the monitoring of a broad range of biological and chemical threat agents is extensively discussed with different types of threats according to the latest literature. A conclusion and future perspectives are added at the end of the review.

Recent Developments in the Field of Explosive Trace Detection

Explosive trace detection (ETD) technologies play a vital role in maintaining national security. ETD remains an active research area with many analytical techniques in operational use. This review details the latest advances in animal olfactory, ion mobility spectrometry (IMS), and Raman and colorimetric detection methods. Developments in optical, biological, electrochemical, mass, and thermal sensors are also covered in addition to the use of nanomaterials technology. Commercially available systems are presented as examples of current detection capabilities and as benchmarks for improvement. Attention is also drawn to recent collaborative projects involving government, academia, and industry to highlight the emergence of multimodal screening approaches and applications. The objective of the review is to provide a comprehensive overview of ETD by highlighting challenges in ETD and providing an understanding of the principles, advantages, and limitations of each technology and relating this to current systems.

Multiple tier detection of TNT using curcumin functionalized silver nanoparticles

The rapid, selective and sensitive detection of trinitrotoluene (TNT), which is widely used in terrorist activities and also a major environmental contaminant is prime concern for the scientific community dealing with environmental problems and national security. This paper described unprecedented CAgP based multiple tier probe employing U.V.–Vis., DLS & SERS techniques for highly selective, rapid and ultrasensitive detection of TNT up to 0.1 nM level. The as synthesized CAgP made possible the naked eye detection of TNT in the form of flakes in real time. The developed method due to its multiple tier approach utilizing the same sample could easily be extended to a high-throughput format and can be utilized for rapid and reliable trace detection of TNT, for on-site screenings in airports, analysis of forensic samples, and environmental analysis.

∙

TNT can interact with curcumin functionalized Ag NPs through p-donor-acceptor interaction.

∙

Curcumin functionalized Ag NPs can be used as an ultrasensitive optical probe for TNT detection.

∙

The probe has an excellent selectivity for TNT against other nitro compounds.

∙

The probe can detect TNT at multiple levels using U.V–Vis., DLS and SERS.

Gold nanonails for surface-enhanced infrared absorption

Surface-enhanced infrared absorption (SEIRA) can dramatically enhance the vibrational signals of analyte molecules owing to the interaction between plasmons and molecular vibrations. It has huge potential for applications in various detection and diagnostic fields. High-aspect-ratio rod-like metal nanostructures have been the most widely studied nanomaterials for SEIRA. However, nearly all of the rod-like nanostructures reported previously are fabricated using physical methods. They suffer from damping and low areal number densities. In this work, high-aspect-ratio Au nanorods are synthesized, and Au nanonails are prepared through Au overgrowth on the as-prepared Au nanorods. The aspect ratios of the Au nanorods and nanonails can be varied in the range of ∼10 to ∼60, and their longitudinal dipolar plasmon resonance wavelengths can be correspondingly tailored from ∼1.6 to ∼8.3 μm. The Au nanonails exhibit superior SEIRA performance with 4-aminothiophenol used as the probe molecules. They are further used to detect the common biomolecule l-cysteine. Numerical simulations are further performed to understand the experimental results. They match well with the experimental observations, revealing the mechanism of the SEIRA enhancement. Our study demonstrates that colloidal high-aspect-ratio Au nanonails and nanorods can function as SEIRA nanoantennas for highly sensitive molecular detection in various situations.