A rapid molecular diagnosis of cutaneous leishmaniasis by colorimetric malachite green-loop-mediated isothermal amplification (LAMP) combined with an FTA card as a direct sampling tool

Development and accuracy evaluation of a new loop-mediated isothermal amplification assay targeting the HSP70 gene for the diagnosis of cutaneous leishmaniasis

Cutaneous leishmaniasis (CL) is a global public health problem caused by species on the genus Leishmania and is the most prevalent clinical form of leishmaniasis. The aim of this study was to develop a new LAMP assay for Leishmania sp. based on HSP70 gene and evaluate it clinically for molecular diagnosis of CL. The study was carried out in the following stages: i) design of primers based on HSP70 gene of Leishmania sp.; ii) evaluation of detection limit and analytical specificity; iii) estimation of the accuracy of LAMP-Leish/HSP70 assay for diagnosing CL. A total of 100 skin biopsy samples from patients, comprising 60 CL cases and 40 non-cases, were analyzed in this study. One LAMP assay using HSP70 gene as molecular target were standardized, and the observed detection limit was 100fg of L. braziliensis purified DNA. The LAMP-Leish/HSP70 assay was specific for Leishmania spp. The LAMP-Leish/HSP70 assay showed an accuracy of 92%, and positivity rates were not affected by lesion onset time or parasite load. This novel LAMP assay targeting the HSP70 gene of Leishmania sp. has the potential to be a useful tool to integrate into routine diagnosis for suspected cases of CL.

A narrative review of wastewater surveillance: pathogens of concern, applications, detection methods, and challenges

Introduction

The emergence and resurgence of pathogens have led to significant global health challenges. Wastewater surveillance has historically been used to track water-borne or fecal-orally transmitted pathogens, providing a sensitive means of monitoring pathogens within a community. This technique offers a comprehensive, real-time, and cost-effective approach to disease surveillance, especially for diseases that are difficult to monitor through individual clinical screenings.

Methods

This narrative review examines the current state of knowledge on wastewater surveillance, emphasizing important findings and techniques used to detect potential pathogens from wastewater. It includes a review of literature on the detection methods, the pathogens of concern, and the challenges faced in the surveillance process.

Results

Wastewater surveillance has proven to be a powerful tool for early warning and timely intervention of infectious diseases. It can detect pathogens shed by asymptomatic and pre-symptomatic individuals, providing an accurate population-level view of disease transmission. The review highlights the applications of wastewater surveillance in tracking key pathogens of concern, such as gastrointestinal pathogens, respiratory pathogens, and viruses like SARS-CoV-2.

Discussion

The review discusses the benefits of wastewater surveillance in public health, particularly its role in enhancing existing systems for infectious disease surveillance. It also addresses the challenges faced, such as the need for improved detection methods and the management of antimicrobial resistance. The potential for wastewater surveillance to inform public health mitigation strategies and outbreak response protocols is emphasized.

Conclusion

Wastewater surveillance is a valuable tool in the fight against infectious diseases. It offers a unique perspective on the spread and evolution of pathogens, aiding in the prevention and control of disease epidemics. This review underscores the importance of continued research and development in this field to overcome current challenges and maximize the potential of wastewater surveillance in public health.

Comparison of the Diagnostic Performances of Five Different Tests in Diagnosing Visceral Leishmaniasis in an Endemic Region of Ethiopia

The lack of accurate and feasible diagnostic tests poses a significant challenge to visceral leishmaniasis (VL) healthcare services in endemic areas. To date, various VL diagnostic tests have been or are being developed, and their diagnostic performances need to be assessed. In the present study, the diagnostic performances of rk39 RDT, the direct agglutination test (DAT), microscopy, loop-mediated isothermal amplification (LAMP), and miniature direct-on-blood polymerase chain reaction-nucleic acid lateral flow immunoassay (mini-dbPCR-NALFIA) were assessed using quantitative polymerase chain reaction (qPCR) as the reference test in an endemic region of Ethiopia. In this study, 235 suspected VL cases and 104 non-endemic healthy controls (NEHCs) were recruited. Among the suspected VL cases, 144 (61.28%) tested positive with qPCR. The sensitivities for rk39 RDT, DAT, microscopy, LAMP assay, and mini-dbPCR-NALFIA were 88.11%, 96.50%, 76.58%, 94.33%, and 95.80%, respectively. The specificities were 83.33%, 97.96%, 100%, 97.38%, and 98.92% for rk39 RDT, DAT, microscopy, LAMP assay, and mini-dbPCR-NALFIA, respectively. In conclusion, rk39 RDT and microscopy exhibited lower sensitivities, while DAT demonstrated excellent performance. LAMP and mini-dbPCR-NALFIA showed excellent performances with feasibility for implementation in remote endemic areas, although the latter requires further evaluation in such regions.

Tape-disc-loop-mediated isothermal amplification (TD-LAMP) method as noninvasive approach for diagnosis of cutaneous leishmaniasis caused by L. tropica

Cutaneous leishmaniasis (CL) is a parasitic disease caused by the bite of infectious female sand flies with high socioeconomic burdens. There is currently no non-invasive, point-of-care, diagnostic method with high sensitivity and specificity available for CL. We herein report the development of a non-invasive tape disc (TD) sampling method combined with a loop-mediated isothermal amplification (LAMP) assay using primer sets targeting kinetoplast DNA (kDNA) of Leishmania tropica (L. tropica) with a colorimetric readout for species-specific diagnosis of CL. We tested our Tape-Disc (TD)-LAMP method on a panel of skin samples collected by TD from 35 confirmed L. tropica patients, 35 healthy individuals and 35 patients with non-L. tropica infections. The detection limit of the TD-LAMP assay was determined as 1 fg (fg), and the assay sensitivity and specificity of 97 % and 100 % for L. tropica infection, respectively. This non-invasive, sensitive and rapid diagnostic method warrants further exploration of its use for differential diagnosis of CL in disease endemic settings.

Detection of chronic toxoplasmosis in the brain of mice using loop-mediated isothermal amplification (LAMP) and conventional PCR

BACKGROUND

Toxoplasma gondii is a common protozoan parasite that infects approximately one-third of the world's population. It is a disease with multiple manifestations. In immunocompetent individuals, symptoms are mild and flu-like, whereas, in immunocompromised patients, it often results in severe morbidity and mortality. Thus, studies for developing a simple, rapid diagnostic tool for early detection of Toxoplasma are emerging. Molecular diagnosis is highly accurate and helpful in congenitally infected and immunocompromised patients. The loop-mediated isothermal amplification (LAMP) technique was invented to improve nucleic acid amplification efficacy in terms of sensitivity and specificity.

AIM OF THE STUDY

The study aimed to validate a LAMP protocol for detecting Toxoplasma DNA in the brain homogenates from mice experimentally infected with Toxoplasma's ME-49 (cyst-forming type II) strain in comparison to PCR.

METHODS

In this study, the target DNA fragment was the Toxoplasma 529-bp, repeated 200-300 copies/genome. The sensitivity of both LAMP and conventional PCR techniques was estimated in brain homogenates in experimental mice at eight weeks post-infection and compared to the histopathology data.

RESULTS

The LAMP reaction showed positive results in 18 of the 26 examined samples of brain homogenates. PCR showed the characteristic 529-bp band in 15 of the 26 examined samples.

CONCLUSION

The LAMP showed a higher sensitivity over PCR in detecting Toxoplasma infection in brain homogenates of infected mice.

Quercetin-Mediated Silver Nanoparticle Formation for the Colorimetric Detection of Infectious Pathogens Coupled with Loop-Mediated Isothermal Amplification

Here, quercetin-mediated silver nanoparticle (AgNP) formation combined with loop-mediated isothermal amplification (LAMP) was introduced to colorimetrically detect two major infectious pathogens, SARS-CoV-2 and Enterococcus faecium, using a foldable PMMA microdevice. The nitrogenous bases of LAMP amplicons can readily form a complex with Ag⁺ ions, and the catechol moiety in quercetin, which acted as a reducing agent, could be chelated with Ag⁺ ions, resulting in the easy electron transfer from the oxidant to the reductant and producing brown-colored AgNPs within 5 min. The introduced method exhibited higher sensitivity than agarose gel electrophoresis due to more active redox centers in quercetin. The detection limit was attained at 10¹ copies μL^-1 and 10¹ CFU mL^-1 for SARS-CoV-2 RNA and E. faecium, respectively. A foldable microdevice made of two pieces of PMMA that fully integrates DNA extraction, amplification, and detection processes was fabricated to establish practical applicability. On one PMMA, DNA extraction was performed in a reaction chamber inserted with an FTA card, and then LAMP reagents were added for amplification. Silver nitrate was added to the reaction chamber after LAMP. On the other PMMA, quercetin-soaked paper discs loaded in the detection chamber were folded toward the reaction chamber for colorimetric detection. An intense brown color was produced within 5 min when heated at 65 °C. The introduced colorimetric assay, which is highly favorable for laboratory and on-site applications, could be a valuable alternative to conventional methods for detecting infectious diseases, given its unique principle, simplicity, and naked-eye detection.

Malachite Green-Based Detection of SARS-CoV-2 by One-Step Reverse Transcription Loop-Mediated Isothermal Amplification

The pandemic of severe acute respiratory syndrome 2 (SARS-CoV-2) revealed the necessity of diagnosis of the infected people to prevent the prevalence infection cycle. Many commercial pathogen diagnosis methods are based on the detection of genomic materials. Isothermal amplification methods such as loop-mediated-isothermal amplification (LAMP) are the method of choice in these cases. Reverse transcription steps are efficiently coupled to LAMP for the detection of pathogens with genomic RNAs such as SARS-CoV-2. Many detection systems for LAMP include fluorescent readout systems. Although such systems result in desirable limits of detection, the need for special instrumentation is the main dispute of such systems to become real point of care assays. In contrast, colorimetric detection methods would reduce costs and improve the applicability of the system. In this study one-step reverse transcription-LAMP reaction was established that enables visual detection of the SARS-CoV-2 genome. Nasopharyngeal RNA samples were first validated by reverse transcription quantitative polymerase chain reaction and then subjected to RT-LAMP. To lower the cost associated with the readout system equipment, malachite green (MG) was used. The color change of MG to blue allowed visual detection of the virus. Firstly, experiments were set up as two-step RT-LAMP reaction to identify the best primer sets. In addition, MG concentration was optimized with the significant colorimetric signal for the positive samples. Next, a one-step colorimetric method was developed for the detection of SARS-CoV-2 based on MG color shift in 2 h.

One-step colorimetric isothermal detection of COVID-19 with AI-assisted automated result analysis: A platform model for future emerging point-of-care RNA/DNA disease diagnosis

Colorimetric loop-mediated DNA isothermal amplification-based assays have gained momentum in the diagnosis of COVID-19 owing to their unmatched feasibility in low-resource settings. However, the vast majority of them are restricted to proprietary pH-sensitive dyes that limit downstream assay optimization or hinder efficient result interpretation. To address this problem, we developed a novel dual colorimetric RT-LAMP assay using in-house pH-dependent indicators to maximize the visual detection and assay simplicity, and further integrated it with the artificial intelligence (AI) operated tool (RT-LAMP-DETR) to enable a more precise and rapid result analysis in large scale testing. The dual assay leverages xylenol orange (XO) and a newly formulated lavender green (LG) dye for distinctive colorimetric readouts, which enhance the test accuracy when performed and analyzed simultaneously. Our RT-LAMP assay has a detection limit of 50 viral copies/reaction with the cycle threshold (Ct) value ≤ 39.7 ± 0.4 determined by the WHO-approved RT-qPCR assay. RT-LAMP-DETR exhibited a complete concordance with the results from naked-eye observation and RT-qPCR, achieving 100% sensitivity, specificity, and accuracy that altogether render it suitable for ultrasensitive point-of-care COVID-19 screening efforts. From the perspective of pandemic preparedness, our method offers a simpler, faster, and cheaper (∼$8/test) approach for COVID-19 testing and other emerging pathogens with respect to RT-qPCR.

Isothermal Nucleic Acid Amplification to Detect Infection Caused by Parasites of the Trypanosomatidae Family: A Literature Review and Opinion on the Laboratory to Field Applicability

Isothermal amplification of nucleic acids has the potential to be applied in resource-limited areas for the detection of infectious agents, as it does not require complex nucleic purification steps or specific and expensive equipment and reagents to perform the reaction and read the result. Since human and animal infections by pathogens of the Tryponasomatidae family occur mainly in resource-limited areas with scant health infrastructures and personnel, detecting infections by these methodologies would hold great promise. Here, we conduct a narrative review of the literature on the application of isothermal nucleic acid amplification for Trypanosoma and Leishmania infections, which are a scourge for human health and food security. We highlight gaps and propose ways to improve them to translate these powerful technologies into real-world field applications for neglected human and animal diseases caused by Trypanosomatidae.

A Palm Germ-Radar (PaGeR) for rapid and simple COVID-19 detection by reverse transcription loop-mediated isothermal amplification (RT-LAMP)

The current COVID-19 pandemic caused by SARS-CoV-2 is raging, seriously threatening people's lives. The establishment of rapid and accurate pathogen detection technology is not only critical in this epidemic, but also a reminder that we must always be prepared for possible future outbreaks. Therefore, we developed a Palm Germ-Radar (PaGeR) device for rapid and simple detection of COVID-19 from extracted patient sample RNA by RT-LAMP. The whole procedure of rapid COVID-19 detection is based on 4 simple steps: inactivation, extraction, amplification, and detection. SARS-CoV-2 down to 1 copy/μL could be detected selectively with naked-eye. Three detection methods (colorimetric, fluorometric and lateral dipstick readout) could be performed in PaGeR instrument. By employing the PaGeR, we successfully detected SARS-CoV-2 in clinical RNA samples isolated from swab specimens. The results showed that 15 out of 17 COVID-19 patients were diagnosed as positive while all 55 normal samples were diagnosed as negative. Therefore, the developed PaGeR instrument can realize the detection of COVID-19 with easily visualized results, providing a promising instrument for rapid detection in the community as well as at home.

Impact assessment of different DNA extraction methods for non-invasive molecular diagnosis of tegumentary leishmaniasis

The aim of this study was to evaluate two methods of nucleic acid extraction (spin-column-based method - commercial kit and direct boil - DB) from swab sampling compared to biopsy sampling for the diagnosis of tegumentary leishmaniasis (TL), (cutaneous - CL and mucocutaneous - MCL forms). The impact of these nucleic acid extraction protocols on different types of PCR and LAMP techniques were compared regarding nucleic acid quality, molecular assays accuracy, indirect quantitation, and costs. The evaluated patients were 57 TL cases (36 CL and 21 MCL) and 34 non-cases. Swab samples extracted by the DB method showed a higher DNA degradation rate and worse DNA quality in comparison to the commercial kit. Molecular tests performed on biopsy samples showed identical or higher performance in all analysis, as compared to their own performance on swab samples for TL (CL and MCL). However, only the SSU rRNA TaqMan™ RT-PCR test showed a significant difference between the performance of biopsy and swab samples extracted by commercial kit. The kDNA-cPCR coupled with swab extracted by commercial kit showed the highest accuracy (95.6%) for TL diagnosis. The sensitivity of the LAMP-RT 18S method in swab samples extracted with a commercial kit (82.5%) was close to that found in biopsy samples (86%) for TL diagnosis. The DB extraction method presented the lowest cost. The use of swab as a minimally-invasive sampling method, associated with an efficient nucleic acid extraction protocol, may represent a low-cost alternative for the diagnosis of CL and MCL.

Naked-eye detection strategies coupled with isothermal nucleic acid amplification techniques for the detection of human pathogens

Nucleic acid amplification-based techniques have gained acceptance by the scientific, and general, community as reference methodologies for many different applications. Since the development of the gold standard of these techniques, polymerase chain reaction (PCR), back in the 1980s many improvements have been made, and alternative techniques emerged reporting improvements over PCR. Among these, isothermal amplification approaches resulted of particular interest as could overcome the need of specialized equipment to accurately control temperature changes, but it was after year 2000 that these techniques have flourished in a huge number of novel alternatives with many different degrees of complexities and requirements. An added value is their possibility to be combined with many different naked-eye detection strategies, simplifying the resources needed, allowing to reduce cost, and serving as the basis for novel developments of lab-on-chip systems, and miniaturized devices, for point-of-care testing. In this review, we will go over different types of naked-eye detection strategies, combined with isothermal amplification. This will provide the readers up-to-date information for them to select the most appropriate strategies depending on the particular needs and resources for their experimental setup.

Diagnosis of visceral and cutaneous leishmaniasis using loop-mediated isothermal amplification (LAMP) protocols: a systematic review and meta-analysis

Sensitive, reliable and fast diagnostic tools that are applicable in low-resource settings, at the point of care (PoC), are seen as crucial in the fight against visceral leishmaniasis (VL) and cutaneous leishmaniasis (CL). Addressing the need for a PoC test, several diagnostic tests, including serological and molecular methods, have been developed and evaluated in the past. One promising molecular method, already implemented for diagnosis of a range of diseases, is the loop-mediated isothermal amplification (LAMP) protocol. In this systematic review and meta-analysis, using a comprehensive search strategy, we focus on studies evaluating the performance of LAMP for the diagnosis of leishmaniasis in humans and other mammals such as dogs, compared with microscopy and/or any other molecular diagnostic method. A meta-analysis, pooling sensitivity and specificity rates and calculating areas under the curve (AUCs) in summary receiver operating characteristic (SROC) plots, was conducted on datasets extracted from studies, grouped by clinical condition and sample type. We found high sensitivity and specificity for LAMP when compared with microscopy and PCR using blood samples, with pooled estimate values of > 90% for all subgroups, corresponding to calculated AUC values > 0.96, except for LAMP compared to microscopy for diagnosis of CL. However, only a limited number of studies were truly comparable. Most of the observed heterogeneity is likely based on true differences between the studies rather than sampling error only. Due to simple readout methods and low laboratory equipment requirements for sample preparation compared to other molecular methods, LAMP is a promising candidate for a molecular (near-)PoC diagnostic method for VL and CL.

Molecular Methods for Pathogenic Bacteria Detection and Recent Advances in Wastewater Analysis

With increasing concerns about public health and the development of molecular techniques, new detection tools and the combination of existing approaches have increased the abilities of pathogenic bacteria monitoring by exploring new biomarkers, increasing the sensitivity and accuracy of detection, quantification, and analyzing various genes such as functional genes and antimicrobial resistance genes (ARG). Molecular methods are gradually emerging as the most popular detection approach for pathogens, in addition to the conventional culture-based plate enumeration methods. The analysis of pathogens in wastewater and the back-estimation of infections in the community, also known as wastewater-based epidemiology (WBE), is an emerging methodology and has a great potential to supplement current surveillance systems for the monitoring of infectious diseases and the early warning of outbreaks. However, as a complex matrix, wastewater largely challenges the analytical performance of molecular methods. This review synthesized the literature of typical pathogenic bacteria in wastewater, types of biomarkers, molecular methods for bacterial analysis, and their recent advances in wastewater analysis. The advantages and limitation of these molecular methods were evaluated, and their prospects in WBE were discussed to provide insight for future development.

Loop-mediated isothermal amplification (LAMP): An effective molecular point-of-care technique for the rapid diagnosis of coronavirus SARS-CoV-2

The novel coronavirus disease-2019 (Covid-19) public health emergency has caused enormous loss around the world. This pandemic is a concrete example of the existing gap between availability of advanced diagnostics and current need for cost-effective methodology. The advent of the loop-mediated isothermal amplification (LAMP) assay provided an innovative tool for establishing a rapid diagnostic technique based on the molecular amplification of pathogen RNA or DNA. In this review, we explore the applications, diagnostic effectiveness of LAMP test for molecular diagnosis and surveillance of severe acute respiratory syndrome coronavirus 2. Our results show that LAMP can be considered as an effective point-of-care test for the diagnosis of Covid-19 in endemic areas, especially for low- and middle-income countries.

Rapid diagnosis of Leishmania infection with a portable loop-mediated isothermal amplification device

L. donovani is an intracellular protozoan parasite, that causes visceral leishmaniasis (VL), and consequently, post-kala azar dermal leishmaniasis (PKDL). Diagnosis and treatment of leishmaniasis is crucial for decreasing its transmission. Various diagnostic techniques like microscopy, enzyme-linked immunosorbent assays (ELISA) and PCR-based methods are used to detect leishmaniasis infection. More recently, loop-mediated isothermal amplification (LAMP) assay has emerged as an ideal diagnostic measure for leishmaniasis, primarily due to its accuracy, speed and simplicity. However, point-of-care diagnosis is still not been tested with the LAMP assay. We have developed a portable LAMP device for the monitoring of Leishmania infection. The LAMP assay performed using our device can detect and amplify as little as 100 femtograms of L. donovani DNA. In a preliminary study, we have shown that the device can also amplify L. donovani DNA present in VL and PKDL patient samples with high sensitivity (100%), specificity (98%) and accuracy (99%), and can be used both for diagnostic and prognostic analysis. To our knowledge, this is the first report to describe the development and application of a portable LAMP device which has the potential to evolve as a point-of-care diagnostic and prognostic tool for Leishmania infections in future.

Development of a low-cost copro-LAMP assay for simultaneous copro-detection of Toxocara canis and Toxocara cati

Toxocariasis is a zoonotic disease caused mainly by Toxocara canis and Toxocara cati and diagnosis in dogs and cats is an important tool for its control. For this reason, a new coprological loop-mediated isothermal amplification (LAMP) assay was developed for the simultaneous detection of these species. The primer set was designed on a region of the mitochondrial cox-1 gene. Amplification conditions were evaluated using a temperature gradient (52°C to 68°C), different incubation times (15–120 min), and different concentrations of malachite green dye (0.004–0.4% w/v). The analytical sensitivity was evaluated with serial dilutions of genomic DNA from T. canis and T. cati adult worms, and with serial dilutions of DNA extracted from feces using a low-cost in-house method. The specificity was evaluated using genomic DNA from Canis lupus familiaris, Felis catus, Escherichia coli, Toxascaris leonina, Ancylostoma caninum, Echinococcus granulosus sensu stricto and Taenia hydatigena. The LAMP assay applied to environmental fecal samples from an endemic area showed an analytical sensitivity of 10–100 fg of genomic DNA and 10−5 serial dilutions of DNA extracted from feces using the low-cost in-house method; with a specificity of 100%. Additionally, the total development of the assay was carried out in a basic laboratory and per-reaction reagent cost decreased by ~80%. This new, low-cost tool can help identify the most common agents of toxocariasis in endemic areas in order to manage prevention strategies without having to rely on a laboratory with sophisticated equipment.

Real-Time Fluorimetry Loop-Mediated Isothermal Amplification for Diagnosis of Leishmaniasis and as a Tool for Assessment of Cure for Post-Kala-Azar Dermal Leishmaniasis

Despite the dwindling number of visceral leishmaniasis (VL) cases in India, there is an urgent need for early and unequivocal diagnostics for controlling and preventing the reemergence of VL. Post-kala-azar dermal leishmaniasis (PKDL), a dermal sequela of VL, serves as a reservoir of the parasite. Diagnosis of PKDL, especially the macular variant, is challenging and poses impediment toward attainment of VL elimination. In this study, a real-time fluorimetry loop-mediated isothermal amplification (RealAmp) assay has been established for the detection of different clinical manifestations of leishmaniasis. The study included 150 leishmaniasis patients (25 VL, 25 cutaneous leishmaniasis [CL], and 100-PKDL) along with 120 controls. The assay demonstrated sensitivity of 100% (95% CI: 86.68-100) for diagnosis of VL and PKDL (95% CI: 79.61-100) and 96% (95% CI: 86.68-100) for CL with 100% specificity. Moreover, considering the cardinal role of PKDL, diagnosis using minimally invasive slit aspirate was explored, which demonstrated remarkable sensitivity of 96% (95% CI: 87.64-98.47). As a test of cure for PKDL, RealAmp successfully detected parasite in two of posttreatment cases who later reported relapse on follow-up. Also, direct sample lysis using slit aspirate was attempted in a small group that yielded sensitivity of 89% (95% CI: 67.20-96.90). RealAmp depicted excellent diagnostic accuracy in the diagnosis of leishmaniasis in concordance with the established SYBR Green I-based visual loop-mediated isothermal amplification (LAMP) and the reference comparator real-time PCR. The study endorsed the employment of LAMP either as visual-LAMP or RealAmp for an accurate and expeditious diagnosis of PKDL and as a tool for assessment of cure.

A novel bioluminescent approach to the loop-mediated isothermal amplification-based detection of Lactobacillus salivarius in feed samples

Coupling loop-mediated isothermal amplification (LAMP) with a bioluminescent assay in real-time (LAMP-BART) is a strategy that can be readily leveraged to detect bacteria in particular samples of interest without the need for costly or complicated equipments. However, this approach exhibits poor sensitivity, and it additionally amplifies all target DNA including that derived from non-viable cells. Herein, we sought to overcome these traditional pyrophosphate bioluminescent assay limitations by utilizing 2-deoxyadenosine-5-(α-thio) -triphosphate (dATPαS) in place of dATP when conducting LAMP, thereby markedly reducing and stabilizing overall background signal levels, resulting in a detection limit of 3 CFU/μL. We were additionally able to ouple this LAMP-BART with propidium monoazide (PMAxx™) as a means of eliminating false-positive signals derived from nonviable cells. Herein, we detail the development of this PMAxx™-LAMP-BART assay and its use for the detection of live Lactobacillus salivarius. Our developed approach exhibited 100% specificity, with a 3 CFU/μL limit of detection (LOD) pure culture. In the application of feed, the LOD was 10³ CFU per 10 g of spiked dry dog food and 10² CFU per 10 g of spiked chicken feed without enrichment. Traditional culture methods and a MALDI Biotyper were also used to confirm the accuracy of our novel assay system.

A Novel Approach to the Bioluminescent Detection of the SARS-CoV-2 ORF1ab Gene by Coupling Isothermal RNA Reverse Transcription Amplification with a Digital PCR Approach

The COVID-19 pandemic caused by the SARS-CoV-2 virus, which first emerged in December 2019, represents an ongoing global public health emergency. Here, we developed an improved and highly sensitive approach to SARS-CoV-2 detection via coupling bioluminescence in real-time (BART) and reverse-transcriptase loop-mediated amplification (RT-LAMP) protocols (RT-LAMP-BART) and was also compatible with a digital LAMP system (Rainsuit), which did not allow for real-time quantification but did, nonetheless, facilitate absolute quantification with a comparable detection limit of 10⁴ copies/mL. Through improving RNA availability in samples to ensure the target RNA present in reaction, we additionally developed a simulated digital RT-LAMP approach using this same principle to enlarge the overall reaction volume and to achieve real-time detection with a limit of detection of 10 copies/mL, and with further improvements in the overall dynamic range of this assay system being achieved through additional optimization.

Fully integrated microfluidic devices for qualitative, quantitative and digital nucleic acids testing at point of care

Benefiting from emerging miniaturized and equipment-free nucleic acid testing (NAT) technologies, fully integrated NAT devices at point of care (POC) with the capability of "sample-in-answer-out" are proceeding at a break-neck speed to eliminate complex operations and reduce the risk of contamination. Like the development of polymerase chain reaction (PCR) technology (the standard technique for NAT), the detection signal of fully integrated NAT devices has evolved from qualitative to quantitative and recently to digital readout, aiming at expanding their extensive applications through gradually improving detection sensitivity and accuracy. This review firstly introduces the existing commercial products, and then illustrates recent fully integrated microfluidic devices for NAT at POC from the aspect of detection signals (i.e., qualitative, quantitative and digital). Importantly, the key issues of existing commercial products and the main challenges between scientific research and product development are discussed. On this basis, we envision that the MARCHED (miniaturized, automatic, reagent-preloaded, commercializable, high-throughput, environment-independent and disposable) NAT devices are expected to be realized in the near future.

Simplified closed tube loop mediated isothermal amplification (LAMP) assay for visual diagnosis of Leishmania infection

In Thailand, asymptomatic leishmaniasis cases have continuously increased, especially among patients with HIV at risk to develop further symptoms of cutaneous and visceral leishmaniasis. Thus, earlier diagnosis using a simple, sensitive and reliable diagnostic tool is needed because populations at risk mostly reside in rural communities where only basic laboratory equipment is available for health care services. In this present study, a closed tube loop mediated isothermal amplification (LAMP) was developed using a piece of parafilm placed between the dye and LAMP reaction mixture to form semi-layer that partially secured SYBR green I from spilling during amplification. No post-amplification preparation was required and accidental spill of the dye during LAMP amplification was prevented. The result could be visually interpreted under visible and UV lights after dye spinning down. The semi-layer modification of a closed tube LAMP showed successful amplification of Leishmania DNA with clear interpretation using both color and fluorescence dyes when observing by the naked eye. The sensitivity and specificity were as high as 94.4 and 96.9%, respectively whereas detection limits were 10² parasites/mL being ten fold more sensitive than other related studies. This user-friendly inexpensive approach is affordable and suitable for empowering leishmaniasis surveillance without the need of expensive devices in all levels of hospitals, including health services, as well as fieldwork, especially in low income countries.

Loop-Mediated Isothermal Amplification as Point-of-Care Diagnosis for Neglected Parasitic Infections

The World Health Organisation (WHO) has placed twenty diseases into a group known as neglected tropical diseases (NTDs), twelve of them being parasitic diseases: Chagas’ disease, cysticercosis/taeniasis, echinococcosis, food-borne trematodiasis, human African trypanosomiasis (sleeping sickness), leishmaniasis, lymphatic filariasis, onchocerciasis (river blindness), schistosomiasis, soil-transmitted helminthiasis (ascariasis, hookworm, trichuriasis), guinea-worm and scabies. Such diseases affect millions of people in developing countries where one of the main problems concerning the control of these diseases is diagnosis-based due to the most affected areas usually being far from laboratories having suitable infrastructure and/or being equipped with sophisticated equipment. Advances have been made during the last two decades regarding standardising and introducing techniques enabling diagnoses to be made in remote places, i.e., the loop-mediated isothermal amplification (LAMP) technique. This technique’s advantages include being able to perform it using simple equipment, diagnosis made directly in the field, low cost of each test and the technique’s high specificity. Using this technique could thus contribute toward neglected parasite infection (NPI) control and eradication programmes. This review describes the advances made to date regarding LAMP tests, as it has been found that even though several studies have been conducted concerning most NPI, information is scarce for others.

Alteration of enzymes and their application to nucleic acid amplification (Review)

Since the discovery of polymerase chain reaction (PCR) in 1985, several methods have been developed to achieve nucleic acid amplification, and are currently used in various fields including clinical diagnosis and life science research. Thus, a wealth of information has accumulated regarding nucleic acid-related enzymes. In this review, some nucleic acid-related enzymes were selected and the recent advances in their modification along with their application to nucleic acid amplification were described. The discussion also focused on optimization of the corresponding reaction conditions. Using newly developed enzymes under well-optimized reaction conditions, the sensitivity, specificity, and fidelity of nucleic acid tests can be improved successfully.

Comparison of real time and malachite-green based loop-mediated isothermal amplification assays for the detection of Plasmodium vivax and P. falciparum

The current context of malaria elimination requires urgent development and implementation of highly sensitive and specific methods for prompt detection and treatment of malaria parasites. Such methods should overcome current delays in diagnosis, allow the detection of low-density infections and address the difficulties in accessing remote endemic communities. In this study, we assessed the performance of the RealAmp and malachite-green loop mediated isothermal amplification (MG-LAMP) methodologies, using microscopy and conventional nested-PCR as reference techniques. Both LAMP techniques were performed for Plasmodium genus, P. falciparum, and P. vivax identification using 136 whole blood samples collected from three communities located in the Peruvian Amazon basin. Turnaround time and costs of performing the LAMP assays were estimated and compared to that of microscopy and nested-PCR. Using nested-PCR as reference standard, we calculated the sensitivity, specificity and 95% confidence interval (CI) for all methods. RealAmp had a sensitivity of 92% (95% CI: 85–96.5%) and specificity of 100% (95% CI: 89.1–100%) for species detection; sensitivity and specificity of MG-LAMP were 94% (95% CI: 87.5–97.8%) and 100% (89.1–100%), respectively. Whereas microscopy showed 88.1% sensitivity (95% CI: 80.2–93.7%) and 100% specificity (95%: 89.1–100%). The turnaround time and costs of performing the LAMP assays were lower compared to those associated with nested-PCR but higher than those associated with microscopy. The two LAMP assays were shown to be more sensitive and simple to implement than microscopy. Both LAMP methodologies could be used as large-scale screening tests, but the MG-LAMP assay uses a simple, portable heat-block while the RealAmp requires a RealAmp machine or a real-time PCR machine. This makes the MG-LAMP an appropriate choice for malaria surveillance studies in endemic sites. Use of LAMP tests in active case detection of Plasmodium parasites could help to detect positive malaria cases early.

Development and Assessment of Leishmania major and Leishmania tropica Specific Loop-Mediated Isothermal Amplification Assays for the Diagnosis of Cutaneous Leishmaniasis in Tunisia

Cutaneous leishmaniasis (CL) remains one of the world's most prevalent neglected diseases, particularly in developing countries. Identification of the involved Leishmania species is an important step in the diagnosis and case management process. In this study, we tested simple, rapid, and highly sensitive loop-mediated isothermal amplification (LAMP) assays for Leishmania DNA species-specific detection from cutaneous lesions. Two LAMP assays, targeting cysteine protease B (cpb) gene, were developed to detect and identify Leishmania major and Leishmania tropica species. Loop-mediated isothermal amplification specificity was examined using DNA samples from other Leishmania species and Trypanosoma species. No cross-reactions were detected. The developed LAMP assays exhibited sensitivity with a detection limit of 20 fg and 200 fg for L. major and L. tropica, respectively. Both tests were applied on clinical samples of CL suspected patients living in endemic Tunisian regions and compared with kinetoplast DNA quantitative PCR (qPCR), microscopic, and conventional cpb-based polymerase chain reaction (PCR) assays. Our LAMP tests were able to discriminate between L. major and L. tropica species and showed a sensitivity of 84% and a specificity of 100%. However, when compared with the performance of the diagnostic tests with latent class analysis (LCA), our LAMP assays show a sensitivity of 100%. These assays can be used as a first-line molecular test for early diagnosis and prompt management of CL cases in public health programs.

Loop-mediated isothermal amplification (LAMP): An advanced molecular point-of-care technique for the detection of Leishmania infection

Leishmaniasis, caused by protozoan parasites of the Leishmania genus, represents an important health problem in many regions of the world. Lack of effective point-of-care (POC) diagnostic tests applicable in resources-limited endemic areas is a critical barrier to effective treatment and control of leishmaniasis. The development of the loop-mediated isothermal amplification (LAMP) assay has provided a new tool towards the development of a POC diagnostic test based on the amplification of pathogen DNA. LAMP does not require a thermocycler, is relatively inexpensive, and is simple to perform with high amplification sensitivity and specificity. In this review, we discuss the current technical developments, applications, diagnostic performance, challenges, and future of LAMP for molecular diagnosis and surveillance of Leishmania parasites. Studies employing the LAMP assay to diagnose human leishmaniasis have reported sensitivities of 80% to 100% and specificities of 94% to 100%. These observations suggest that LAMP offers a good molecular POC technique for the diagnosis of leishmaniasis and is also readily applicable to screening at-risk populations and vector sand flies for Leishmania infection in endemic areas.

Validation of SYBR green I based closed tube loop mediated isothermal amplification (LAMP) assay and simplified direct-blood-lysis (DBL)-LAMP assay for diagnosis of visceral leishmaniasis (VL)

Background

The World Health Organization has targeted elimination of visceral leishmaniasis (VL) in the Indian subcontinent (ISC) by 2020. Despite distinctive decline seen in the number of VL cases in ISC, there is still a quest for development of a diagnostic test which has the utility for detection of active infection and relapse cases and as a test of cure. The present study validated the sensitivity and specificity of SYBR Green I based closed tube LAMP assay reported by us for diagnosis of VL.

Methodology

The validation study was carried out at two endemic sites in India, located at Rajendra Memorial Research Institute of Medical Sciences (RMRIMS), Patna and Institute of Medical Sciences (IMS), Banaras Hindu University (BHU), Varanasi. Standard operating protocols were provided at the two sites for applying LAMP assay on confirmed VL cases. The diagnostic accuracy of LAMP assay was evaluated by Receiver operator curve (ROC) analysis. Furthermore, a simplified LAMP assay based on direct blood lysis, DBL-LAMP, was developed and verified for its diagnostic accuracy.

Principal findings

A total of 267 eligible participants were included in the study which comprised of 179 VL cases and 88 controls. Sensitivity and specificity of the LAMP assay were 98.32% (95% C.I– 95.2–99.7%) and 96.59% (95% C.I.-90.4–99.3%), respectively. ROC curve analysis depicted no significant difference between area under curve (AUC_ROC) for LAMP assay and rK39 RDT, indicative of LAMP as an excellent diagnostic test. DBL-LAMP assay, performed on 67 VL and 100 control samples, yielded a sensitivity of 93.05% (95% C.I- 84.75–97%) and specificity of 100% (95% C.I.- 96.30–100%).

Conclusions/Significance

The validated closed tube LAMP for diagnosis of VL will provide impetus to the ongoing VL elimination programme in ISC. The assay based on direct blood lysis promotes its scope for application in field settings by further reducing time and cost.

Definitive diagnosis of visceral leishmaniasis(VL) by demonstration of amastigotes by microscopy is invasive and risky. Serology based diagnosis using rK39 rapid diagnostic test(RDT) has excellent sensitivity of~97% when combined with clinical symptoms but is inconclusive for detection of active infection and relapses due to persistence of anti-leishmanial antibodies. The developed SYBR Green I based closed tube LAMP assay overcomes these constraints and further, direct blood lysis (DBL)-LAMP, makes it more suitable for field application. The study involved validation of LAMP assay at two endemic sites in India, on a total of 179 VL patients confirmed by rK39 RDT and/ or microscopy and 88 controls. The assay was highly sensitive (98.32%) and specific (96.59%). Further, DBL-LAMP assay yielded a sensitivity and specificity of 93.05% and 100%, respectively. In conclusion, the study has validated the field potential of LAMP assay for diagnosis of VL which will provide momentum to ongoing VL elimination in the Indian subcontinent (ISC).

Evaluation of point-of-care tests for cutaneous leishmaniasis diagnosis in Kabul, Afghanistan

Background

Kabul (Afghanistan) is a major focus of cutaneous leishmaniasis (CL) caused by Leishmania tropica. Microscopy remains the reference test for diagnosis despite its low performance. We evaluated whether Loopamp™ Leishmania Detection Kit (Loopamp) and CL Detect™ Rapid Test (CL Detect), detecting Leishmania DNA and antigen, respectively could improve CL diagnosis.

Methods

A diagnostic accuracy study with prospective inclusion was conducted in a leishmaniasis reference clinic in Kabul. Slit skin samples from CL suspects were analysed by microscopy. Samples taken with a dental broach were tested with CL Detect, Loopamp, and PCR. All samples were transferred to the Academic Medical Center (AMC, the Netherlands) for PCR and Loopamp analyses. The diagnostic performance of the tests was evaluated against a reference combining microscopy and PCR.

Findings

274 CL suspects were included in the study. In Kabul, CL Detect had a 65·4% sensitivity [95% Confidence Interval (CI): 59.2–71.2%] and a 100% specificity [95% CI: 80.5–100%], while these were 87.6% [95%CI: 82.9–91.3%] and 70.6% [95% CI: 44.0–89.7%] for Loopamp. At AMC the Loopamp's sensitivity (92.2% [95% CI: 88.2–95.2%]) and specificity (94.1% [95% CI: 71.3–99.8%]) were higher. An algorithm where CL Detect negative suspects would be tested by Loopamp yielded a 93.4% sensitivity [95% CI: 89.6–96.1%] and a 94.1% specificity [95% CI: 71.3–99.8%] when Loopamp's performance at AMC was used.

Interpretation

The high specificity of CL Detect and the performance of Loopamp allow their use in a diagnostic algorithm that would minimize the number of CL patients referred for confirmation.

Fund

Federal Ministry of Education and Research, Germany.

Accuracy of a Rapid Diagnostic Test Based on Antigen Detection for the Diagnosis of Cutaneous Leishmaniasis in Patients with Suggestive Skin Lesions in Morocco

In rural areas in Morocco, diagnosing cutaneous leishmaniasis (CL) can be challenging. We evaluated the accuracy of a rapid diagnostic test (RDT) based on antigen detection, CL Detect Rapid Test^™ (Inbios International Inc., Seattle, WA), in this setting. We consecutively recruited patients with new skin ulcers in nine primary health centers. We took a dental broach sample for the RDT and two other tissue samples by scraping the border and center of the lesion with a scalpel and smearing it on a slide. We duplicated each smear by pressing a clean slide against it and processed the slides by microscopy, polymerase chain reaction (PCR) internal transcribed spacer 1, and kDNA minicircle PCR. In a subgroup with positive PCR, the Leishmania species was identified using PCR-restriction fragment length polymorphism and PCR-sequencing of hsp70 genes. A participant with positive microscopy and/or PCR was considered a confirmed CL case. We computed sensitivity (Se) and specificity (Sp) of the RDT compared with this reference standard (ClinicalTrials.gov registration: NCT02979002). Between December 2016 and July 2017, we included 219 patients, 50% of them were under 18 years old. Rapid diagnostic test Se was 68% [95% confidence interval (CI): 61–74], Sp 94% [95% CI: 91–97], positive predictive value 95% [95% CI: 92–98], and negative predictive value 64% [95% CI: 58–70]. Despite its low Se, this novel RDT is a useful addition to clinical management of CL in Morocco, especially in isolated localities. Rapid diagnostic test–positive lesions can be treated as CL; but when RDT negative, microscopy should be done in a second step. The Se of the RDT can probably be optimized by improving the sampling procedure.

Molecular diagnosis of protozoan parasites by Recombinase Polymerase Amplification

Infections caused by protozoan parasites affect millions of people around the world. Traditionally, diagnosis was made by microscopy, which is insensitive and in some cases not specific. Molecular methods are highly sensitive and specific, but equipment costs and personnel training limit its availability only to specialized centers, usually far from populations with the highest risk of infection. Inexpensive methods that can be applied at the point of care (POC), especially in places with limited health infrastructure, would be a major advantage. Isothermal amplification of nucleic acids does not require thermocyclers and is relatively inexpensive and easy to implement. Among isothermal methods, recombinase polymerase amplification (RPA) is sensitive and potentially applicable at POC. We and others have developed RPA diagnostic tests to detect protozoan parasites of medical importance. Overall, our results have shown high specificity with limits of detection similar to PCR. Currently, the optimization of RPA for use at the POC is under development, and in the near future the tests should become available to detect protozoan infections in the field. In this review we discuss the current status, challenges, and future of RPA in the field of molecular diagnosis of protozoan parasites.

Evaluation of fluorimetry and direct visualization to interpret results of a loop-mediated isothermal amplification kit to detect Leishmania DNA

Background

Nucleic acid amplification tests (NAATs) have proven to be advantageous in the diagnosis of leishmaniases, allowing sensitive diagnosis of: (i) cutaneous leishmaniasis in long duration lesions and (ii) visceral leishmaniasis using a less-invasive sample like peripheral blood, in opposition to tissue aspiration required for parasite demonstration by microscopy. Despite their benefits, the implementation of NAATs for leishmaniasis diagnosis at the point-of-care has not been achieved yet, mostly due to the complexity and logistical issues associated with PCR-based methods.

Methods

In this work, we have evaluated the performance of a ready-to-use loop-mediated isothermal amplification (LAMP) kit using two real time fluorimeters to amplify leishmanial DNA obtained by silica column-based and Boil & Spin protocols.

Results

The different approaches used to run and interpret the LAMP reactions showed a performance equivalent to PCR and real-time PCR, using spiked and clinical samples. The time to positivity obtained with real-time fluorimetry showed an excellent correlation with both Ct values and parasite load from real-time quantitative PCR.

Conclusions

The results obtained open the possibility of using a highly stable, ready-to-use LAMP kit for the accurate diagnosis of leishmaniasis at the point-of-care. Furthermore, the feasibility of relating time to positivity, determined with a portable real-time fluorimeter, with the parasite burden could have a wider application in the management of leishmaniasis, such as in treatment efficacy monitoring or as a pharmacodynamics tool in clinical trials.

Sensitive and less invasive confirmatory diagnosis of visceral leishmaniasis in Sudan using loop-mediated isothermal amplification (LAMP)

Background

Confirmatory diagnosis of visceral leishmaniasis (VL), as well as diagnosis of relapses and test of cure, usually requires examination by microscopy of samples collected by invasive means, such as splenic, bone marrow or lymph node aspirates. This causes discomfort to patients, with risks of bleeding and iatrogenic infections, and requires technical expertise. Molecular tests have great potential for diagnosis of VL using peripheral blood, but require well-equipped facilities and trained personnel. More user-friendly, and field-amenable options are therefore needed. One method that could meet these requirements is loop-mediated isothermal amplification (LAMP) using the Loopamp Leishmania Detection Kit, which comes as dried down reagents that can be stored at room temperature, and allows simple visualization of results.

Methodology/Principal findings

The Loopamp Leishmania Detection Kit (Eiken Chemical Co., Japan), was evaluated in the diagnosis of VL in Sudan. A total of 198 VL suspects were tested by microscopy of lymph node aspirates (the reference test), direct agglutination test-DAT (in house production) and rK28 antigen-based rapid diagnostic test (OnSite Leishmania rK39-Plus, CTK Biotech, USA). LAMP was performed on peripheral blood (whole blood and buffy coat) previously processed by: i) a direct boil and spin method, and ii) the QIAamp DNA Mini Kit (QIAgen). Ninety seven of the VL suspects were confirmed as cases by microscopy of lymph node aspirates. The sensitivity and specificity for each of the tests were: rK28 RDT 98.81% and 100%; DAT 88.10% and 78.22%; LAMP-boil and spin 97.65% and 99.01%; LAMP-QIAgen 100% and 99.01%.

Conclusions/Significance

Due to its simplicity and high sensitivity, rK28 RDT can be used first in the diagnostic algorithm for primary VL diagnosis, the excellent performance of LAMP using peripheral blood indicates that it can be also included in the algorithm for diagnosis of VL as a simple test when parasitological confirmatory diagnosis is required in settings that are lower than the reference laboratory, avoiding the need for invasive lymph node aspiration.

Tissue aspiration, either from spleen, bone marrow or lymph node, remains the Gold Standard for parasitological confirmation in patients suspected of visceral leishmaniasis (VL), and is often used for detection of relapses, and as a test of cure. The procedure is invasive, with risks of severe complications, requires skilled personnel to perform, and appropriate facilities to manage severe adverse events, if they occur. These drawbacks can be solved by using sensitive diagnostic test based on peripheral blood. Nucleic acid amplification tests (NAAT) are sensitive for the detection of Leishmania parasites in blood; however, in VL-endemic settings, most NAAT are restricted to well-equipped laboratories. A robust NAAT, Loopamp Leishmania Detection Kit has recently been developed in a collaboration between FIND, Eiken Chemical Co. Ltd., Japan and other partners. We have evaluated this kit in Sudan and obtained a sensitivity of 97.6% and specificity of 99.1%, using DNA obtained from peripheral blood through a simple boil and spin method. Its simplicity and excellent diagnostic performance make this kit ideal for parasitological confirmation of VL in less equipped laboratories.

Loop-mediated isothermal amplification (LAMP): a versatile technique for detection of micro-organisms

Loop‐mediated isothermal amplification (LAMP) amplifies DNA with high specificity, efficiency and rapidity under isothermal conditions by using a DNA polymerase with high displacement strand activity and a set of specifically designed primers to amplify targeted DNA strands. Following its first discovery by Notomi et al. (2000Nucleic Acids Res 28: E63), LAMP was further developed over the years which involved the combination of this technique with other molecular approaches, such as reverse transcription and multiplex amplification for the detection of infectious diseases caused by micro‐organisms in humans, livestock and plants. In this review, available types of LAMP techniques will be discussed together with their applications in detection of various micro‐organisms. Up to date, there are varieties of LAMP detection methods available including colorimetric and fluorescent detection, real‐time monitoring using turbidity metre and detection using lateral flow device which will also be highlighted in this review. Apart from that, commercialization of LAMP technique had also been reported such as lyophilized form of LAMP reagents kit and LAMP primer sets for detection of pathogenic micro‐organisms. On top of that, advantages and limitations of this molecular detection method are also described together with its future potential as a diagnostic method for infectious disease.

Analytical Performance of Four Polymerase Chain Reaction (PCR) and Real Time PCR (qPCR) Assays for the Detection of Six Leishmania Species DNA in Colombia

Leishmaniasis comprises a spectrum of parasitic diseases caused by protozoans of the genus Leishmania. Molecular tools have been widely employed for the detection of Leishmania due to its high sensitivity and specificity. However, the analytical performance of molecular platforms as PCR and real time PCR (qPCR) including a wide variety of molecular markers has never been evaluated. Herein, the aim was to evaluate the analytical performance of 4 PCR-based assays (designed on four different targets) and applied on conventional and real-time PCR platforms. We evaluated the analytical performance of conventional PCR and real time PCR, determining exclusivity and inclusivity, Anticipated Reportable Range (ARR), limit of detection (LoD) and accuracy using primers directed to kDNA, HSP70, 18S and ITS-1 targets. We observed that the kDNA was the most sensitive but does not meet the criterion of exclusivity. The HSP70 presented a higher LoD in conventional PCR and qPCR in comparison with the other markers (1 × 10¹ and 1 × 10^-1 equivalent parasites/mL respectively) and had a higher coefficient of variation in qPCR. No statistically significant differences were found between the days of the test with the four molecular markers. The present study revealed that the 18S marker presented the best performance in terms of analytical sensitivity and specificity for the qPCR in the species tested (species circulating in Colombia). Therefore, we recommend to explore the analytical and diagnostic performance in future studies using a broader number of species across America.

Loop-mediated isothermal amplification (LAMP): A novel rapid detection platform for pathogens

Foodborne bacterial infections and diseases have been considered to be a major threat for public health in the worldwide. Increased incidence of human diseases caused by foodborne pathogens have been correlated with growing world population and mobility. Loop-mediated isothermal amplification (LAMP) has been regarded as an innovative gene amplification technology and emerged as an alternative to PCR-based methodologies in both clinical laboratory and food safety testing. Nowadays, LAMP has been applied to detection and identification on pathogens from microbial diseases, as it showed significant advantage in high sensitivity, specificity and rapidity. The high sensitivity of LAMP enables detection of the pathogens in sample materials even without time consuming sample preparation. An overview of LAMP mainly containing the development history, reaction principle and its application to four kind of foodborne pathogens detection are presented in this paper. As concluded, with the advantages of rapidity, simplicity, sensitivity, specificity and robustness, LAMP is capable of applications for clinical diagnosis as well as surveillance of infection diseases. Moreover, the main purpose of this paper is to provide theoretical basis for the clinical application of LAMP technology.

Non-invasive diagnosis of cutaneous leishmaniasis by the direct boil loop-mediated isothermal amplification method and MinION™ nanopore sequencing

Cutaneous leishmaniasis (CL) is gaining attention as a public health problem. We present two cases of CL imported from Syria and Venezuela in Japan. We diagnosed them as CL non-invasively by the direct boil loop-mediated isothermal amplification method and an innovative sequencing method using the MinION™ sequencer. This report demonstrates that our procedure could be useful for the diagnosis of CL in both clinical and epidemiological settings.

Leishmaniases in Ecuador: Comprehensive review and current status

This article reviews current knowledge about leishmaniases in Ecuador, proceeding from 1920, when the first human case was described, to the present, mainly focusing on the recent research events published. Regarding basic situations, it appears that 23 of Ecuador's 24 provinces have leishmaniasis-case reports. The disease is one of the mandatory notification infectious diseases in the country since 2005. All the 21,305 cases notified to the Ministry of Public Health, during the period from 2001 through 2014, were said to involve different clinical features of cutaneous leishmaniasis (CL) but not visceral (VL). Eight Leishmania species, L. (Viannia) guyanensis, L. (V.) panamensis, L. (V.) braziliensis, L. (Leishmania) mexicana, L. (L.) amazonensis, L. (L.) major-like, L. (V.) naiffiand L. (V.) lainsoni were characterized. The last two species were most recently reported from the Ecuadorian Amazon regions. Of the 73 Ecuadorian Lutzomyia species (43 man-biting species) recorded, only four, Lu. trapidoi, Lu. gomezi, Lu. ayacuchensis, and Lu. tortura were incriminated as vectors of the Leishmania parasites. Current knowledge on the reservoir hosts of Leishmania in Ecuador is extremely poor. Recently, in Ecuador different kinds of molecular techniques were developed for diagnosis and mass screening of the disease, employing various materials derived from patients and sand fly vectors. These are PCR-RFLP, colorimetric FTA-LAMP etc. Brief comments and recommendations were also given, for future research and control of leishmaniases in Ecuador.

Geographic Distribution of Leishmania Species in Ecuador Based on the Cytochrome B Gene Sequence Analysis

A countrywide epidemiological study was performed to elucidate the current geographic distribution of causative species of cutaneous leishmaniasis (CL) in Ecuador by using FTA card-spotted samples and smear slides as DNA sources. Putative Leishmania in 165 samples collected from patients with CL in 16 provinces of Ecuador were examined at the species level based on the cytochrome b gene sequence analysis. Of these, 125 samples were successfully identified as Leishmania (Viannia) guyanensis, L. (V.) braziliensis, L. (V.) naiffi, L. (V.) lainsoni, and L. (Leishmania) mexicana. Two dominant species, L. (V.) guyanensis and L. (V.) braziliensis, were widely distributed in Pacific coast subtropical and Amazonian tropical areas, respectively. Recently reported L. (V.) naiffi and L. (V.) lainsoni were identified in Amazonian areas, and L. (L.) mexicana was identified in an Andean highland area. Importantly, the present study demonstrated that cases of L. (V.) braziliensis infection are increasing in Pacific coast areas.