The solubility-permeability interplay and oral drug formulation design: Two heads are better than one

Supersaturated Drug Delivery System of Oxyberberine Based on Cyclodextrin Nanoaggregates: Preparation, Characterization, and in vivo Application

Propose

Oxyberberine (OBB), one of the main metabolites of berberine derived from intestinal and erythrocyte metabolism, exhibits appreciable anti-hyperuricemic activity. However, the low water solubility and poor plasma concentration-effect relationship of OBB hamper its development and utilization. Therefore, an OBB-hydroxypropyl-β-cyclodextrin (HP-β-CD) supersaturated drug delivery system (SDDS) was prepared and characterized in this work.

Methods

OBB-HP-β-CD SDDS was prepared using the ultrasonic-solvent evaporation method and characterized. Additionally, the in vitro and in vivo release experiments were conducted to assess the release kinetics of OBB-HP-β-CD SDDS. Subsequently, the therapeutic efficacy of OBB-HP-β-CD SDDS on hyperuricemia (HUA) was investigated by means of histopathological examination and evaluation of relevant biomarkers.

Results

The results of FT-IR, DSC, PXRD, NMR and molecular modeling showed that the crystallized form of OBB was transformed into an amorphous OBB-HP-β-CD complex. Dynamic light scattering indicated that this system was relatively stable and maintained by formation of nanoaggregates with an average diameter of 23 nm. The dissolution rate of OBB-HP-β-CD SDDS was about 5 times higher than that of OBB raw material. Furthermore, the AUC0-t of OBB-HP-β-CD SDDS (10.882 μg/mL*h) was significantly higher than that of the raw OBB counterpart (0.701 μg/mL*h). The oral relative bioavailability of OBB-HP-β-CD SDDS was also enhanced by 16 times compared to that of the raw material. Finally, in vivo pharmacodynamic assay showed the anti-hyperuricemic potency of OBB-HP-β-CD SDDS was approximately 5-10 times higher than that of OBB raw material.

Conclusion

Based on our findings above, OBB-HP-β-CD SDDS proved to be an excellent drug delivery system for increasing the solubility, dissolution, bioavailability, and anti-hyperuricemic potency of OBB.

Research progress on nanotechnology of traditional Chinese medicine to enhance the therapeutic effect of osteoarthritis

Osteoarthritis (OA) is a prevalent chronic condition that primarily impacts the articular cartilage and surrounding bone tissue, resulting in joint inflammation and structural deterioration. The etiology of OA is multifaceted and intricately linked to the oxidative stress response of joint tissue. Oxidative stress (OS) in OA leads to the creation of reactive oxygen species (ROS) and other oxidizing agents, resulting in detrimental effects on chondrocytes. This oxidative damage diminishes the flexibility and robustness of cartilage, thereby expediting the progression of joint deterioration. Therefore, the antioxidant effect is crucial in the treatment of OA. Currently, a considerable number of components found in traditional Chinese medicine (TCM) have been scientifically demonstrated to exhibit remarkable antioxidant and anti-inflammatory properties. Nevertheless, the utilization of this program is considerably constrained as a result of intrinsic deficiencies, notably stability concerns. The successful amalgamation of TCM components with nanotechnology has properly tackled these concerns and enhanced the efficacy of therapeutic results. The objective of this study is to delineate the antioxidant characteristics of nano-TCM and assess the current inventory of literature pertaining to the application of nano-TCM in the treatment of OA. In conclusion, this paper will now turn to the constraints and potential avenues for the advancement of nano-TCM within the realm of OA therapy.

Solubility-permeability interplay of hydrotropic solubilization of piroxicam

OBJECTIVES

In this research paper, an investigation has been made to assess the simultaneous effect of a solubility enhancement approach, i.e., hydrotropy on the solubility and apparent permeability of piroxicam. The solubility of piroxicam (PRX) a BCS (biopharmaceutics classification system) class II drug has been increased using a mixed hydrotropy approach. This study is based on identifying the pattern of solubility-permeability interplay and confirming whether every solubility gain results in a concomitant decrease in permeability or permeability remains unaffected.

METHOD

Solid dispersions of PRX were formulated using two hydrotropes, viz., sodium benzoate (SB) and piperazine (PP) by solvent evaporation method. A comprehensive 32factorial design was employed to study the effect of hydrotropes on the solubility and permeability of PRX. Subsequently, PRX tablets containing these solid dispersions were formulated and evaluated.

KEY FINDINGS

SB and PP displayed a significant increase in the solubility of PRX ranging from 0.99 to 2.21 mg/mL for F1-F9 batches attributed to the synergistic effect of hydrotropes. However, there is a reduction in PRX permeability with increasing hydrotrope levels. The decline in permeability was notably less pronounced compared to the simultaneous rise in aqueous solubility of PRX.

CONCLUSION

An evident tradeoff between permeability and solubility emerged through the mixed hydrotropic solubilization for PRX. As PRX has generally higher intrinsic permeability, it has been assumed that this permeability loss will not affect the overall absorption of PRX. However, it may affect the absorption of drugs with limited permeability. Therefore, solubility permeability interplay should be investigated during solubility enhancement.

Unleashing the potential: integrating nano-delivery systems with traditional Chinese medicine

This review explores the potential of integrating nano-delivery systems with traditional Chinese herbal medicine, acupuncture, and Chinese medical theory. It highlights the intersections and potential of nano-delivery systems in enhancing the effectiveness of traditional herbal medicine and acupuncture treatments. In addition, it discusses how the integration of nano-delivery systems with Chinese medical theory can modernize herbal medicine and make it more readily accessible on a global scale. Finally, it analyzes the challenges and future directions in this field.

Ethanol-based solubility-enabling oral drug formulation development: Accounting for the solubility-permeability interplay

The aim of the current work was to investigate the key factors that govern the success/failure of an ethanol-based solubility-enabling oral drug formulation, including the effects of the ethanol on the solubility of the drug, the permeability across the intestinal membrane, the drug's dissolution in the aqueous milieu of the gastrointestinal tract (GIT), and the resulting solubility-permeability interplay. The concentration-dependent effects of ethanol-based vehicles on the solubility, the in-vitro Caco-2 permeability, the in-vivo rat permeability, and the biorelevant dissolution of the BCS class II antiepileptic drug carbamazepine were studied, and a predictive model describing the solubility-permeability relationship was developed. Significant concentration-dependent solubility increase of CBZ was obtained with increasing ethanol levels, that was accompanied by permeability decrease, both in Caco-2 and in rat perfusion studies, demonstrating a tradeoff between the increased solubility afforded by the ethanol and a concomitant permeability decrease. When ethanol absorption was accounted for, an excellent agreement was achieved between the predicted permeability and the experimental data. Biorelevant dissolution studies revealed that minimal ethanol levels of 30 % and 50 % were needed to fully dissolve 1 and 5 mg CBZ dose respectively, with no drug precipitation.In conclusion, key factors to be accounted for when developing ethanol-based formulation include the drug's solubility, permeability, the solubility-permeability interplay, and the drug dose intended to be delivered. Only the minimal amount of ethanol sufficient to solubilize the drug dose throughout the GIT should be used, and not more than that, to avoid unnecessarily permeability loss, and to maximize overall drug absorption.

Solubility-enabling formulations for oral delivery of lipophilic drugs: considering the solubility-permeability interplay for accelerated formulation development

INTRODUCTION

Tackling low water solubility of drug candidates is a major challenge in today's pharmaceutics/biopharmaceutics, especially by means of modern solubility-enabling formulations. However, drug absorption from these formulations oftentimes remains unchanged or even decreases, despite substantial solubility enhancement.

AREAS COVERED

In this article, we overview the simultaneous effects of the formulation on the solubility and the apparent permeability of the drug, and analyze the contribution of this solubility-permeability interplay to the success/failure of the formulation to increase the overall absorption and bioavailability. Three different patterns of interplay were identified: (1) solubility-permeability tradeoff in which every solubility gain comes with a price of concomitant permeability loss; (2) an advantageous interplay pattern in which the permeability remains unchanged alongside the solubility gain; and (3) an optimal interplay pattern in which the formulation increases both the solubility and the permeability. Passive vs. active intestinal permeability considerations in the context of the solubility-permeability interplay are also thoroughly discussed.

EXPERT OPINION

The solubility-permeability interplay pattern of a given formulation has a critical effect on its overall success/failure, and hence, taking into account both parameters in solubility-enabling formulation development is prudent and highly recommended.

The Complexity of Bariatric Patient's Pharmacotherapy: Sildenafil Biopharmaceutics and Pharmacokinetics before vs. after Gastric Sleeve/Bypass

Postbariatric altered gastrointestinal (GI) anatomy/physiology may significantly harm oral drug absorption and overall bioavailability. In this work, sildenafil, the first phosphodiesterase-5 (PDE5) inhibitor, was investigated for impaired postbariatric solubility/dissolution and absorption; this research question is of particular relevance since erectile dysfunction (ED) is associated with higher body mass index (BMI). Sildenafil solubility was determined both in vitro and ex vivo, using pre- vs. postsurgery gastric contents aspirated from patients. Dissolution tests were done in conditions mimicking the stomach before surgery, after sleeve gastrectomy (post-SG, pH 5), and after one anastomosis gastric bypass (post-OAGB, pH 7). Finally, these data were included in physiologically based pharmacokinetic (PBPK) modelling (GastroPlus®) to simulate sildenafil PK before vs. after surgery. pH-dependent solubility was demonstrated with low solubility (0.3 mg/mL) at pH 7 vs. high solubility at pH 1-5, which was also confirmed ex vivo with much lower solubility values in postbariatric gastric samples. Hampered dissolution of all sildenafil doses was obtained under post-OAGB conditions compared with complete (100%) dissolution under both presurgery and post-SG conditions. PBPK simulations revealed delayed sildenafil absorption in postbariatric patients (increased tmax) and reduced Cmax, especially in post-OAGB patients, relative to a presurgery state. Hence, the effect of bariatric surgery on sildenafil PK is unpredictable and may depend on the specific bariatric procedure. This mechanistically based analysis suggests a potentially undesirable delayed onset of action of sildenafil following gastric bypass surgery.

Leveraging the use of in vitro and computational methods to support the development of enabling oral drug products: An InPharma commentary

Due to the strong tendency towards poorly soluble drugs in modern development pipelines, enabling drug formulations such as amorphous solid dispersions, cyclodextrins, co-crystals and lipid-based formulations are frequently applied to solubilize or generate supersaturation in gastrointestinal fluids, thus enhancing oral drug absorption. Although many innovative in vitro and in silico tools have been introduced in recent years to aid development of enabling formulations, significant knowledge gaps still exist with respect to how best to implement them. As a result, the development strategy for enabling formulations varies considerably within the industry and many elements of empiricism remain. The InPharma network aims to advance a mechanistic, animal-free approach to the assessment of drug developability. This commentary focuses current status and next steps that will be taken in InPharma to identify and fully utilize 'best practice' in vitro and in silico tools for use in physiologically based biopharmaceutic models.

Designing a Novel Coamorphous Salt Formulation of Telmisartan with Amlodipine to Enhance Permeability and Oral Absorption

Coamorphous formulation is a useful approach for enhancing the solubility of poorly water-soluble drugs via intermolecular interactions. In this study, a hydrogen-bonding-based coamorphous system was developed to improve drug solubility, but it barely changed the apparent permeability (Papp) of the drug. This study aimed to design a novel coamorphous salt using ionic interactions to improve drug permeability and absorption. Telmisartan (TMS), with an acidic group, was used to form a coamorphous salt with basic amlodipine (AML). Evaluation of the physicochemical properties confirmed the formation of a coamorphous salt via ionic interactions between the amine group of AML and the carboxyl group of TMS at a molar ratio of 1:1. The coamorphous salt of TMS/AML enhanced the partitioning of both drugs into octanol, indicating increased lipophilicity owing to the interaction between TMS and AML. The coamorphous salt dramatically enhanced TMS solubility (99.8 times that of untreated TMS) and decreased AML solubility owing to the interaction between TMS and AML. Although the coamorphous salt showed a decreased Papp in the permeation study in the presence of a thicker unstirred water layer (UWL) without stirring, Papp increased in the presence of a thinner UWL with stirring. The oral absorption of TMS from the coamorphous salt increased by up to 4.1 times compared to that of untreated TMS, whereas that of AML remained unchanged. Although the coamorphous salt with increased lipophilicity has a disadvantage in terms of diffusion through the UWL, the UWL is thin in human/animal bodies owing to the peristaltic action of the digestive tract. Dissociation of the coamorphous salt on the membrane surface could contribute to the partitioning of the neutral form of drugs to the membrane cells compared with untreated drugs. As a result, coamorphous salt formation has the advantage of improving the membrane permeation and oral absorption of TMS, owing to the enhanced solubility and supply of membrane-permeable free TMS on the surface of the membrane.

Recent advance in phytonanomedicine and mineral nanomedicine delivery system of the treatment for acute myeloid leukemia

Acute myeloid leukemia (AML) is an invasive hematopoietic malignancy caused by excessive proliferation of myeloblasts. Classical chemotherapies and cell transplantation therapies have remarkable efficacy in AML treatment; however, 30-40% of patients relapsed or had refractory disease. The resistance of AML is closely related to its inherent cytogenetics or various gene mutations. Recently, phytonanomedicine are found to be effective against resistant AML cells and have become a research focus for nanotechnology development to improve their properties, such as increasing solubility, improving absorption, enhancing bioavailability, and maintaining sustained release and targeting. These novel phytonanomedicine and mineral nanomedicine, including nanocrystals, nanoemulsion, nanoparticles, nanoliposome, and nanomicelles, offer many advantages, such as flexible dosages or forms, multiple routes of administration, and curative effects. Therefore, we reviewed the application and progress of phytomedicine in AML treatment and discussed the limitations and future prospects. This review may provide a solid reference to guide future research on AML treatment.

Effect of Solubility Improvement via Formation of an Amorphous Composite of Indomethacin and Sulindac on Membrane Permeability

The importance of permeability as well as solubility of the drug has been recognized in improving the solubility of poorly water-soluble drugs. This study investigated the impact of amorphous composites of indomethacin (IMC) and sulindac (SLD) on the membrane permeability of drugs. The IMC/SLD (1/1) formulation prepared by dry grinding was amorphous with a single glass transition temperature. The Fourier transform IR spectra and Raman spectra revealed formation of hydrogen bonds between the OH group of IMC and the carbonyl group of SLD. These results suggest that an amorphous composite was formed between IMC and SLD through hydrogen bonding. The amount of dissolved IMC and SLD from the amorphous composite of IMC/SLD (1/1) was higher than that of the untreated IMC or SLD in the dissolution test. The permeated amounts and permeation rates of both drugs were enhanced by increasing the solubility of the amorphous composite. Conversely, the apparent membrane permeability coefficients (P_app) were almost same for untreated drugs and amorphous composites. In the case of hydroxypropyl-β-cyclodextrin and sodium dodecyl sulfate, P_app of the drugs decreased with the addition of these compounds, although the drug solubility was enhanced by the solubilization effect. This study revealed that an amorphous composite formed through hydrogen bonding is an attractive pharmaceutical way to enhance the permeated amount and permeation rate without changing the P_app of both the drugs.

Enzymatic Hydrolysis of Rutin: Evaluation of Kinetic Parameters and Anti-Proliferative, Mutagenic and Anti-Mutagenic Effects

The bioavailability of glucoside flavonoids is influenced by the nature of the sugar, glucosides being absorbed faster than rhamnoglucosides, for example. One strategy to enhance the bioavailability is enzymatic hydrolysis. In this study, some kinetic parameters of hesperidinase-mediated hydrolysis of rutin were evaluated using an UHPLC/QTOF-MS^E analysis of the products of a bioconversion reaction. The resulting hydrolyzed rutins (after 4, 8 and 12 h of reaction) were submitted to anti-proliferative and Cytokinesis-Block Micronucleus (CBMN) assays in CHO-K1 cells. In the hesperidinase-mediated hydrolysis, the final concentration of quercetin-3-O-glucoside (Q3G) was directly proportional to the rutin concentration and inversely proportional to the reaction time. At an anti-proliferative concentration (2.5 μg/mL), hydrolyzed rutin derivatives did not show a mutagenic effect, except for the sample with a higher content of Q3G (after 4 h of the enzymatic hydrolysis of rutin). Moreover, the higher Q3G content in hydrolyzed rutin protected the CHO-K1 cells 92% of the time against methyl methanesulfonate-induced mutagenic damage. These results suggested that the anti-mutagenic effect of hydrolyzed rutin might be related to antioxidant and cell death induction. Presenting a good lipophilicity/hydrophilicity ratio, together with antioxidant and anti-mutagenic activities, the hesperidinase-mediated hydrolyzed rutin seemed to be a promisor raw material for the development of food supplements.

High drug loading nanosized amorphous solid dispersion (NASD) with enhanced in vitro solubility and permeability: Benchmarking conventional ASD

Through liquid-liquid phase separation (LLPS), it is possible to generate drug-rich nanoparticles during the dissolution of conventional amorphous solid dispersions (ASDs). These self-generated nanoparticles may improve the oral absorption of poorly water-soluble drugs by enhancing the drug's apparent solubility and effective membrane permeability. However, due to the high concentration threshold required for LLPS, conventional ASDs that can consistently generate drug-rich nanoparticles during dissolution are rare. More importantly, the quality of these meta-stable drug-rich nanoparticles is hard to control during dissolution, leading to inconsistency in formulation performances. This work has described a continuous twin-screw extrusion process capable of producing nanosized ASD (NASD) formulations that can offer better solubility and permeability enhancements over conventional ASD formulations. Two polymeric carriers, polyvinylpyrrolidone-co-vinyl acetate (PVPVA) and hydroxypropyl methylcellulose acetate succinate (HPMCAS), with a model hydrophobic drug celecoxib (BCS II), were formulated into both ASD and NASD formulations. Compared to the conventional ASD formulation, the prefabricated NASD (sizes ranging between 40 and 200 nm) embedded within a polyol matrix can be rapidly dispersed into a nanoparticle suspension in the presence of aqueous media. The resulting NASDs achieved drug loadings up to 80 % w/w and a maximum of 98 % encapsulation efficiency. Because of the TSE platform's high drug-loading capacity and high scalability, the developed method may be useful for continuously producing personalized nanomedicines.

Revisiting the Solubility-Permeability Relationship with Hydrophobic Drug Umifenovir in Pluronic Solutions: Impact of pH and Co-Solvent

This study describes the influence of pluronic F-127 (F-127) and ethanol (EtOH) on the solubility of umifenovir (UMF) in buffer solutions of pH 2.0 and pH 7.4, and its permeability through cellulose membranes. A 44.4-fold greater UMF solubility in acidic medium as compared to an alkaline one was estimated at 310.15 K. The concentration of UMF in the saturated solution was enhanced by the interaction with F-127 micelles. The combined positive effect of EtOH and F-127 on the solubility was estimated. The aggregation number of F-127 micelles in the presence of 10% and 20% ethanol appeared to be reduced by 2.1-fold and 4.1-fold, respectively, as compared to buffer pH 7.4. The presence of ethanol in buffer pH 7.4 solution provided better solvent conditions but inhibited the formation of F-127 micelles. The impact of UMF on the aggregation number of F-127 was not pronounced and was expressed only by a slight increase of 1 and 3 units in 10% and 20% EtOH, respectively. According to the values of zeta potential, addition of EtOH reduced the stability of the system. The permeation of UMF in buffer pH 7.4 measured through the cellulose membrane MWCO 12-14 kDa was increased 1.4-fold by 10% EtOH. An increase in EtOH content to 20% reduced this effect to 1.2-fold. Decreasing effect of 1.5% F-127 on the permeability was inhibited by using 10% EtOH. The solution containing 1.5% F-127 and 10% EtOH was shown to be an advantageous system for UMF in view of the solubility-permeability balance. The authors suppose the findings of the study to be useful for the design of pharmaceutical formulations based on UMF antiviral drugs.

Multidisciplinary strategies to enhance therapeutic effects of flavonoids from Epimedii Folium: Integration of herbal medicine, enzyme engineering, and nanotechnology

Flavonoids such as baohuoside I and icaritin are the major active compounds in Epimedii Folium (EF) and possess excellent therapeutic effects on various diseases. Encouragingly, in 2022, icaritin soft capsules were approved to reach the market for the treatment of hepatocellular carcinoma (HCC) by National Medical Products Administration (NMPA) of China. Moreover, recent studies demonstrate that icaritin can serve as immune-modulating agent to exert anti-tumor effects. Nonetheless, both production efficiency and clinical applications of epimedium flavonoids have been restrained because of their low content, poor bioavailability, and unfavorable in vivo delivery efficiency. Recently, various strategies, including enzyme engineering and nanotechnology, have been developed to increase productivity and activity, improve delivery efficiency, and enhance therapeutic effects of epimedium flavonoids. In this review, the structure-activity relationship of epimedium flavonoids is described. Then, enzymatic engineering strategies for increasing the productivity of highly active baohuoside I and icaritin are discussed. The nanomedicines for overcoming in vivo delivery barriers and improving therapeutic effects of various diseases are summarized. Finally, the challenges and an outlook on clinical translation of epimedium flavonoids are proposed.

Preparation of a camptothecin analog FLQY2 self-micelle solid dispersion with improved solubility and bioavailability

BACKGROUND

7-p-trifluoromethylphenyl-FL118 (FLQY2) is a camptothecin analog with excellent antitumor efficacy against various solid tumors. However, its poor solubility and low bioavailability limited the development of the drug. Polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus^®), an emerging carrier for preparing solid dispersion (SD), encapsulated FLQY2 to circumvent the above limitations.

RESULTS

In this project, FLQY2-SD was prepared by solvent evaporation method and self-assembled into micelles in aqueous solutions owing to the amphiphilic nature of Soluplus^®. The physicochemical characterizations demonstrated that FLQY2 existed in a homogeneous amorphous form in SD and was rapidly dissolved. The micelles did not affect cytotoxicity or cellular uptake of FLQY2 in vitro, and the oral bioavailability was increased by 12.3-fold compared to the FLQY2 cyclodextrin suspension. The pharmacokinetics of FLQY2-SD showed rapid absorption, accumulation in the intestine, and slow elimination via fecal. Metabolite identification studies showed 14 novel metabolites were identified, including 12 phase I metabolites (M1-M12) and 2 phase II metabolites (M13-M14), of which M2 (oxidation after decarboxylation) and M7 (dioxolane ring cleavage) were the primary metabolites in the positive mode and negative mode, respectively. The tumor growth inhibition rate (TGI, 81.1%) of FLQY2-SD (1.5 mpk, p.o./QW) in tumor-bearing mice after oral administration was higher than that of albumin-bound Paclitaxel (15 mpk, i.v./Q4D) and Irinotecan hydrochloride (100 mpk, i.p./QW).

CONCLUSIONS

The successful preparation, pharmacokinetics, and pharmacodynamics studies of FLQY2-SD showed that the solubility and bioavailability of FLQY2 were improved, which facilitated the further druggability development of FLQY2.

Mechanisms and Extent of Enhanced Passive Permeation by Colloidal Drug Particles

Formulations containing nanosized drug particles such as nanocrystals and nanosized amorphous drug aggregates recently came into light as promising strategies to improve the bioavailability of poorly soluble drugs. However, the increased solubility due to the reduction in particle size cannot adequately explain the enhanced bioavailability. In this study, the mechanisms and extent of enhanced passive permeation by drug particles were investigated using atazanavir, lopinavir, and clotrimazole as model drugs. Franz diffusion cells with lipid-infused membranes were utilized to evaluate transmembrane flux. The impact of stirring rate, receiver buffer condition, and particle size was investigated, and mass transport analyses were conducted to calculate transmembrane flux. Flux enhancement by particles was found to be dependent on particle size as well as the partitioning behavior of the drug between the receiver solution and the membrane, which is determined by both the drug and buffer used. A flux plateau was observed at high particle concentrations above amorphous solubility, confirming that mass transfer of amorphous drug particles from the aqueous solution to the membrane occurs only through the molecularly dissolved drug. Mass transport models were used to calculate flux enhancement by particles for various drugs at different conditions. Good agreements were obtained between experimental and predicted values. These results should contribute to improved bioavailability prediction of nanosized drug particles and better design of formulations containing colloidal drug particles.

Amorphous Solid Dispersions: Role of the Polymer and Its Importance in Physical Stability and In Vitro Performance

Amorphous solid dispersions stabilized by one or more polymer(s) have been widely used for delivering amorphous drugs with poor water solubilities, and they have gained great market success. Polymer selection is important for preparing robust amorphous solid dispersions, and considerations should be given as to how the critical attributes of a polymer can enhance the physical stability, and the in vitro and in vivo performances of a drug. This article provides a comprehensive overview for recent developments in the understanding the role of polymers in amorphous solid dispersions from the aspects of nucleation, crystal growth, overall crystallization, miscibility, phase separation, dissolution, and supersaturation. The critical properties of polymers affecting the physical stability and the in vitro performance of amorphous solid dispersions are also highlighted. Moreover, a perspective regarding the current research gaps and novel research directions for better understanding the role of the polymer is provided. This review will provide guidance for the rational design of polymer-based amorphous pharmaceutical solids with desired physicochemical properties from the perspective of physical stability and in vitro performance.

Effect of functional excipients on the dissolution and membrane permeation of furosemide formulated into multiple-unit pellet system (MUPS) tablets

The effect of functional excipients (i.e. chitosan, sodium lauryl sulphate, NaHCO₃, and CaCO₃) formulated in multiple-unit pellet system (MUPS) tablets has been investigated on the dissolution and permeability of furosemide, a BCS class IV compound. Spherical beads were produced and compressed into MUPS tablets. MUPS tablet formulations were evaluated for hardness, disintegration, mass variation, friability, and dissolution (pH 1.2, pH 4.6, and pH 7.4). Ex vivo permeability studies were conducted across excised pig tissues (pyloric antrum and duodenal region) on selected experimental MUPS tablet formulations. Histological analysis was conducted on the tissues after exposure to selected experimental MUPS tablet formulations. Dissolution results in the 0.1 M HCl (pH 1.2) showed the highest effect of the excipients on furosemide release. Dissolution parameters showed increased dissolution of furosemide for the MUPS tablet formulations containing functional excipients: a 4.5-10-fold increase in the AUC values, the %_max showed a 60-70% increase and up to a 19-fold increase in DRi was seen. Permeability results revealed a 2.5-fold higher cumulative percentage transport for selected formulations. The results proved that functional excipients incorporated into beads, compressed into MUPS tablet formulations increased furosemide release as well as permeation across excised intestinal tissues.

Stiripentol Enteric Solid Dispersion-Loaded Effervescent Tablets: Enhanced Dissolution, Stability, and Absorption

Due to poor solubility and stability in acid conditions, the gastrointestinal administration of stiripentol (STP) is still a significant challenge. This study aimed to explore the applicability of effervescent tablets compressed from STP-loaded enteric solid dispersions to improve the solubility and stability of the insoluble and acid-labile drug. STP-loaded solid dispersions (STP-SDs) and the effervescent tablets (STP-SD-ETs) were prepared using solvent evaporation and dry granulation technology, respectively, and their formulations were optimized. Then, STP-SDs were characterized regarding solid state, in vitro release, stability, etc. Results showed that enteric amorphous STP-SDs were successfully prepared and significantly improved the solubility and stability of STP. Moreover, compared with STP suspensions, the bioavailability of STP-SD-ETs was as high as 138.71%. Concomitantly, STP-SD-ETs significantly increased the intestinal absorption rate of STP. Overall, the oral preparation encompassing enteric solid dispersion combined with effervescent tablet technology possesses excellent performance in enhancing dissolution, anti-acid hydrolysis stability, and absorption of STP. Our work provides a promising method to improve the delivery of drugs with poor solubility and acid-labile stability.

Adaptation of the Kirkstall QV600 LLI Microfluidics System for the Study of Gastrointestinal Absorption by Mass Spectrometry Imaging and LC-MS/MS

Absorption studies on oral drugs can be difficult due to the challenge of replicating the complex structure and environment of the GI tract. Drug absorption studies can be conducted using in vivo and ex vivo animal tissue or animal-free techniques. These studies typically involve the use of Caco-2 cells. However, Caco-2 cells do not incorporate all the cell types found in intestinal tissue and lack P450 metabolizing enzymes. The QV600 LLI system is a microfluidics system designed for use with cell culture. Here, it has been adapted to house appropriate sections of ex vivo porcine tissue to act as a system that models the duodenum section of the small intestine. A pH regulated solution of Atorvastatin was flowed over the apical layer of the GI tissue and a nutrient solution flowed over the basal layer of the tissue to maintain tissue viability. The tissue samples were snap-frozen, cryosectioned, and imaged using MALDI Mass Spectrometry Imaging (MSI). A proof-of-concept study on the effect of excipients on absorption was conducted. Different concentrations of the solubilizing agent were added to the donor circuit of the QV600 LLI. The amount of Atorvastatin in the acceptor circuit was determined to study the effect of the excipient on the amount of drug that had permeated through the tissue. Using these data, Papp, pig values were calculated and compared with the literature.

Flux-Based Formulation Development-A Proof of Concept Study

The work aimed to develop the Absorption Driven Drug Formulation (ADDF) concept, which is a new approach in formulation development to ensure that the drug product meets the expected absorption rate. The concept is built on the solubility-permeability interplay and the rate of supersaturation as the driving force of absorption. This paper presents the first case study using the ADDF concept where not only dissolution and solubility but also permeation of the drug is considered in every step of the formulation development. For that reason, parallel artificial membrane permeability assay (PAMPA) was used for excipient selection, small volume dissolution-permeation apparatus was used for testing amorphous solid dispersions (ASDs), and large volume dissolution-permeation tests were carried out to characterize the final dosage forms. The API-excipient interaction studies on PAMPA indicated differences when different fillers or surfactants were studied. These differences were then confirmed with small volume dissolution-permeation assays where the addition of Tween 80 to the ASDs decreased the flux dramatically. Also, the early indication of sorbitol’s advantage over mannitol by PAMPA has been confirmed in the investigation of the final dosage forms by large-scale dissolution-permeation tests. This difference between the fillers was observed in vivo as well. The presented case study demonstrated that the ADDF concept opens a new perspective in generic formulation development using fast and cost-effective flux-based screening methods in order to meet the bioequivalence criteria.

Recent Advances in Enhancement of Dissolution and Supersaturation of Poorly Water-Soluble Drug in Amorphous Pharmaceutical Solids: A Review

Amorphization is one of the most effective pharmaceutical approaches to enhance the dissolution and oral bioavailability of poorly water-soluble drugs. In recent years, amorphous formulations have been experiencing rapid development both in theoretical and practical application. Based on using different types of stabilizing agents, amorphous formulations can be mainly classified as polymer-based amorphous solid dispersion, coamorphous formulation, mesoporous silica-based amorphous formulation, etc. This paper summarizes recent advances in the dissolution and supersaturation of these amorphous formulations. Moreover, we also highlight the roles of stabilizing agents such as polymers, low molecular weight co-formers, and mesoporous silica. Maintaining supersaturation in solution is a key factor for the enhancement of dissolution profile and oral bioavailability, and thus, the strategies and challenges for maintaining supersaturation are also discussed. With an in-depth understanding of the inherent mechanisms of dissolution behaviors, the design of amorphous pharmaceutical formulations will become more scientific and reasonable, leading to vigorous development of commercial amorphous drug products.

pH-Dependent supersaturation from amorphous solid dispersions of weakly basic drugs

PURPOSE

In amorphous solid dispersions (ASDs), the chemical potential of a drug can be reduced due to mixing with the polymer in the solid matrix, and this can lead to reduced drug release when the polymer is insoluble in the dissolution media. If both the drug and the polymer composing an ASD are ionizable, drug release from the ASD becomes pH-dependent. The goal of this study was to gain insights into the pH-dependent solubility suppression from ASD formulations.

METHODS

The maximum release of clotrimazole, a weakly basic drug, from ASDs formulated with insoluble and pH-responsive polymers, was determined as a function of solution pH. Drug-polymer interactions in ASDs were probed using melting point depression, moisture sorption, and solid-state Nuclear Magnetic Resonance spectroscopy (SSNMR) measurements.

RESULTS

The extent of solubility suppression was dependent on polymer type and drug loading. The strength of drug-polymer interactions was found to correlate well with the degree of solubility suppression. For the same ASD, the degree of solubility suppression was nearly constant across the solution pH range studied, suggesting that polymer-drug interactions in residual ASD solids was independent of solution pH. The total drug release agrees with the Henderson-Hasselbalch relationship if the suppressed amorphous solubility of the free drug is independent of solution pH.

CONCLUSIONS

The mechanism of solubility suppression at different solution pHs appeared to be drug-polymer interactions in the solid-state, where the concentration of the free drug remains the same at variable pHs and the total drug concentration follows the Henderson-Hasselbalch relationship.

Smart design approaches for orally administered lipophilic prodrugs to promote lymphatic transport

Challenges to effective delivery of drugs following oral administration has attracted growing interest over recent decades. Small molecule drugs (<1000 Da) are generally absorbed across the gastrointestinal tract into the portal blood and further transported to the systemic circulation via the liver. This can result in a significant reduction to the oral bioavailability of drugs that are metabolically labile and ultimately lead to ineffective exposure and treatment. Targeting drug delivery to the intestinal lymphatics is attracting increased attention as an alternative route of drug transportation providing multiple benefits. These include bypassing hepatic first-pass metabolism and selectively targeting disease reservoirs residing within the lymphatic system. The particular physicochemical requirements for drugs to be able to access the lymphatics after oral delivery include high lipophilicity (logP>5) and high long-chain triglyceride solubility (> 50 mg/g), properties required to enable drug association with the lipoprotein transport pathway. The majority of small molecule drugs, however, are not this lipophilic and therefore not substantially transported via the intestinal lymph. This has contributed to a growing body of investigation into prodrug approaches to deliver drugs to the lymphatic system by chemical manipulation. Optimised lipophilic prodrugs have the potential to increase lymphatic transport thereby improving oral pharmacokinetics via a reduction in first pass metabolism and may also target of disease-specific reservoirs within the lymphatics. This may provide advantages for current pharmacotherapy approaches for a wide array of pathological conditions, e.g. immune disease, cancer and metabolic disease, and also presents a promising approach for advanced vaccination strategies. In this review, specific emphasis is placed on medicinal chemistry strategies that have been successfully employed to design lipophilic prodrugs to deliberately enable lymphatic transport. Recent progress and opportunities in medicinal chemistry and drug delivery that enable new platforms for efficacious and safe delivery of drugs are critically evaluated.

Traditional herbal medicine and nanomedicine: Converging disciplines to improve therapeutic efficacy and human health

Traditional herbal medicine (THM), an ancient science, is a gift from nature. For thousands of years, it has helped humans fight diseases and protect life, health, and reproduction. Nanomedicine, a newer discipline has evolved from exploitation of the unique nanoscale morphology and is widely used in diagnosis, imaging, drug delivery, and other biomedical fields. Although THM and nanomedicine differ greatly in time span and discipline dimensions, they are closely related and are even evolving toward integration and convergence. This review begins with the history and latest research progress of THM and nanomedicine, expounding their respective developmental trajectory. It then discusses the overlapping connectivity and relevance of the two fields, including nanoaggregates generated in herbal medicine decoctions, the application of nanotechnology in the delivery and treatment of natural active ingredients, and the influence of physiological regulatory capability of THM on the in vivo fate of nanoparticles. Finally, future development trends, challenges, and research directions are discussed.

Variable-Temperature NMR Analysis of the Thermodynamics of Polymer Partitioning between Aqueous and Drug-Rich Phases and Its Significance for Amorphous Formulations

We previously reported that the polymers used in amorphous solid dispersion (ASD) formulations, such as polyvinylpyrrolidone (PVP), polyvinylpyrrolidone/vinyl acetate (PVP-VA), and hypromellose (HPMC), distribute into the drug-rich phase of ibuprofen (IBP) formed by liquid-liquid phase separation, resulting in a reduction in the maximum drug supersaturation in the aqueous phase. Herein, the mechanism underlying the partitioning of the polymer into the drug-rich phase was investigated from a thermodynamic perspective. The dissolved IBP concentration in the aqueous phase and the amount of polymer distributed into the IBP-rich phase were quantitatively analyzed in IBP-supersaturated solutions containing different polymers using variable-temperature solution-state nuclear magnetic resonance (NMR) spectroscopy. The polymer weight ratio in the IBP-rich phase increased at higher temperatures, leading to a more notable reduction of IBP amorphous solubility. Among the polymers, the amorphous solubility reduction was the greatest for the PVP-VA solution at lower temperatures, while HPMC reduced the amorphous solubility to the greatest extent at higher temperatures. The change in the order of polymer impact on the amorphous solubility resulted from the differences in the temperature dependency of polymer partitioning. The van't Hoff plot of the polymer partition coefficient revealed that both enthalpy and entropy changes for polymer transfer into the IBP-rich phase from the aqueous phase (ΔH_{aqueous→IBP-rich} and ΔS_{aqueous→IBP-rich}) gave positive values for most of the measured temperature range, indicating that polymer partitioning into the IBP-rich phase was an endothermic but entropically favorable process. The polymer transfer into the IBP-rich phase was more endothermic for HPMC than for PVP and PVP-VA. The solid-state NMR analysis of the IBP/polymer ASD implied that the newly formed IBP/polymer interactions in the IBP-rich phase upon polymer incorporation were weaker for HPMC, providing a rationale for the larger positive transfer enthalpy for HPMC. The change in Gibbs free energy for polymer transfer (ΔG_{aqueous→IBP-rich}) showed negative values across the experimental temperature range, decreasing with an increase in temperature, indicating that the distribution of the polymer into the IBP-rich phase is favored at higher temperatures. Moreover, ΔG_{aqueous→IBP-rich} for HPMC showed the greatest decrease with the temperature, likely reflecting the temperature-induced dehydration of HPMC in the aqueous phase. This study contributes fundamental insights into the phenomenon of polymer partitioning into drug-rich phases, furthering the understanding of achievable supersaturation levels and ultimately providing information on polymer selection for ASD formulations.

Role of Permeability on the Biopredictive Dissolution of Amorphous Solid Dispersions

An ideal dissolution test for amorphous solid dispersions (ASDs) should reflect physicochemical, physiological, and hydrodynamic conditions which accurately represent in vivo dissolution. However, this is confounded by the evolution of different molecular and colloidal species during dissolution, generating a supersaturated state of the drug. The supersaturated state of a drug is thermodynamically unstable which drives the process of precipitation resulting in a loss of solubility advantage. Maintaining a supersaturated state of the drug with the help of precipitation inhibiting excipients is a key component in the design of ASDs. Therefore, a biopredictive dissolution test is critical for proper risk assessment during the development of an optimal ASD formulation. One of the overlooked components of biopredictive dissolution is the role of drug permeability. The kinetic changes in the phase behavior of a drug during dissolution of ASDs are influenced by drug permeability across a membrane. Conventionally, drug dissolution and permeation are analyzed separately although they occur simultaneously in vivo. The kinetic phase changes occurring during dissolution of ASDs can influence the thermodynamic activity and membrane flux of a drug. The present review evaluates the feasibility, predictability, and practicability of permeability/dissolution for the optimal development and risk assessment of ASD formulations.

Amorphous Form of Carvedilol Phosphate-The Case of Divergent Properties

The amorphous form of carvedilol phosphate (CVD) was obtained as a result of grinding. The identity of the obtained amorphous form was confirmed by powder X-ray diffraction (PXRD), different scanning calorimetry (DSC), and FT-IR spectroscopy. The process was optimized in order to obtain the appropriate efficiency and time. The crystalline form of CVD was used as the reference standard. Solid dispersions of crystalline and amorphous CVD forms with hydrophilic polymers (hydroxypropyl-β-cyclodextrin, Pluronic^® F-127, and Soluplus^®) were obtained. Their solubility at pH 1.2 and 6.8 was carried out, as well as their permeation through a model system of biological membranes suitable for the gastrointestinal tract (PAMPA-GIT) was established. The influence of selected polymers on CVD properties was defined for the amorphous form regarding the crystalline form of CVD. As a result of grinding (four milling cycles lasting 15 min with 5 min breaks), amorphous CVD was obtained. Its presence was confirmed by the “halo effect” on the diffraction patterns, the disappearance of the peak at 160.5 °C in the thermograms, and the changes in position/disappearance of many characteristic bands on the FT-IR spectra. As a result of changes in the CVD structure, its lower solubility at pH 1.2 and pH 6.8 was noted. While the amorphous dispersions of CVD, especially with Pluronic^® F-127, achieved better solubility than combinations of crystalline forms with excipients. Using the PAMPA-GIT model, amorphous CVD was assessed as high permeable (Papp > 1 × 10⁻⁶ cm/s), similarly with its amorphous dispersions with excipients (hydroxypropyl-β-cyclodextrin, Pluronic^® F-127, and Soluplus^®), although in their cases, the values of apparent constants permeability were decreased.

An overview of in vitro, ex vivo and in vivo models for studying the transport of drugs across intestinal barriers

Oral administration is the most commonly used route for drug delivery owing to its cost-effectiveness, ease of administration, and high patient compliance. However, the absorption of orally delivered compounds is a complex process that greatly depends on the interplay between the characteristics of the drug/formulation and the gastrointestinal tract. In this contribution, we review the different preclinical models (in vitro, ex vivo and in vivo) from their development to application for studying the transport of drugs across intestinal barriers. This review also discusses the advantages and disadvantages of each model. Furthermore, the authors have reviewed the selection and validation of these models and how the limitations of the models can be addressed in future investigations. The correlation and predictability of the intestinal transport data from the preclinical models and human data are also explored. With the increasing popularity and prevalence of orally delivered drugs/formulations, sophisticated preclinical models with higher predictive capacity for absorption of oral formulations used in clinical studies will be needed.

Physical methods for enhancing drug absorption from the gastrointestinal tract

Overcoming the gastrointestinal (GI) barriers is a formidable challenge in the oral delivery of active macromolecules such as peptide- and protein- based drugs. In the past four decades, a plethora of formulation strategies ranging from permeation enhancers, nanosized carriers, and chemical modifications of the drug's structure has been investigated to increase the oral absorption of these macromolecular compounds. However, only limited successes have been achieved so far, with the bioavailability of marketed oral peptide drugs remaining generally very low. Recently, a few approaches that are based on physical interactions, such as magnetic, acoustic, and mechanical forces, have been explored in order to control and improve the drug permeability across the GI mucosa. Although in the early stages, some of these methods have shown great potential both in terms of improved bioavailability and spatiotemporal delivery of drugs. Here, we offer a concise, yet critical overview of these rather unconventional technologies with a particular focus on their potential and possible challenges for further clinical translation.

Amorphous Drug Solubility and Maximum Free Drug Concentrations in Cyclodextrin Solutions: A Quantitative Study Using NMR Diffusometry

Cyclodextrin (CD) has been widely used as a solubilizing agent for poorly water-soluble drugs. In the present study, the effect of CD on the amorphous drug solubility and the maximum thermodynamic activity of the drug in the aqueous phase when the drug concentration exceeded the liquid-liquid phase separation (LLPS) concentration was investigated using three chemically diverse CDs, β-cyclodextrin (β-CD), dimethyl-β-CD (DM-β-CD), and hydroxypropyl-β-CD (HP-β-CD). The amorphous solubility of ibuprofen (IBP) increased substantially linearly with the increase in the CD concentration due to IBP/CD complex formation. Surprisingly, although the crystalline solubility of IBP in the β-CD solution reached a plateau at β-CD concentrations above 3 mM (B_S-type solubility diagram) because of the limited crystalline solubility of the IBP/β-CD complex, the amorphous solubility of IBP increased linearly even when the β-CD concentration was higher than 3 mM. The amorphous solubility of IBP in CD solutions was influenced primarily by the phase separation of the IBP-supersaturated solution to the aqueous phase and the other phase mainly composed of IBP, namely, the IBP-rich phase, via LLPS. NMR spectroscopy revealed that DM-β-CD was distributed into the IBP-rich phase when the IBP concentration exceeded its amorphous solubility, while β-CD and HP-β-CD showed minimal mixing with the IBP-rich phase. NMR diffusometry showed that the maximum free IBP concentration was reduced in the DM-β-CD solution compared to that in the buffer. The mixing of DM-β-CD with the IBP-rich phase reduced the chemical potential of IBP in the IBP-rich phase, which in turn reduced the maximum thermodynamic activity of IBP in the aqueous phase. In contrast, the maximum free IBP concentration was unchanged when β-CD or HP-β-CD was present. The hydrophobic nature of the DM-β-CD substituent may contribute to its partitioning into the IBP-rich phase. The present study highlights the impact of CD on the maximum thermodynamic activity of drugs as well as the apparent amorphous solubility of the drug. This aspect should be considered for improving the effective absorption of poorly water-soluble drugs.

Enabling formulations of aprepitant: in vitro and in vivo comparison of nanocrystalline, amorphous and deep eutectic solvent based formulations

A deep eutectic solvent (DES) is a eutectic system consisting of hydrogen bond donor and acceptor has been suggested as a promising formulation strategy for poorly soluble drugs. A DES consisting of choline chloride and levulinic acid in a 1:2  molar ratio was used to formulate a liquid solution of the model drug aprepitant. This formulation was tested in vitro (drug release and permeability) and in vivo (rat model) and compared with the performance of amorphous aprepitant and the commercial aprepitant nanocrystalline formulation. In this study a DES formulation is compared for the first time directly to other established enabling formulations. The in vitro drug release study demonstrated that the DES formulation and the amorphous form both were able to induce an apparent supersaturation followed by subsequent drug precipitation. To mitigate the risk of precipitation, HPMC was predissolved in the dissolution medium, which successfully reduced the degree of precipitation. In line with the results from the release study, an in vitro permeation study showed superior permeation of the drug from the DES formulation and from the amorphous form compared to the nanocrystalline formulation. However, the promising in vitro findings could not be directly translated into an increased in vivo performance in rats compared to the nanocrystalline formulation. Whilst the DES formulation (34 ± 4%) showed a higher oral bioavailability compared to amorphous aprepitant (20 ± 4%), it was on par with the oral bioavailability obtained from the nanocrystalline formulation (36 ± 2%).

Drug-Rich Phases Induced by Amorphous Solid Dispersion: Arbitrary or Intentional Goal in Oral Drug Delivery?

Among many methods to mitigate the solubility limitations of drug compounds, amorphous solid dispersion (ASD) is considered to be one of the most promising strategies to enhance the dissolution and bioavailability of poorly water-soluble drugs. The enhancement of ASD in the oral absorption of drugs has been mainly attributed to the high apparent drug solubility during the dissolution. In the last decade, with the implementations of new knowledge and advanced analytical techniques, a drug-rich transient metastable phase was frequently highlighted within the supersaturation stage of the ASD dissolution. The extended drug absorption and bioavailability enhancement may be attributed to the metastability of such drug-rich phases. In this paper, we have reviewed (i) the possible theory behind the formation and stabilization of such metastable drug-rich phases, with a focus on non-classical nucleation; (ii) the additional benefits of the ASD-induced drug-rich phases for bioavailability enhancements. It is envisaged that a greater understanding of the non-classical nucleation theory and its application on the ASD design might accelerate the drug product development process in the future.

A well plate-based multiplexed platform for incorporation of organoids into an organ-on-a-chip system with a perfusable vasculature

Owing to their high spatiotemporal precision and adaptability to different host cells, organ-on-a-chip systems are showing great promise in drug discovery, developmental biology studies and disease modeling. However, many current micro-engineered biomimetic systems are limited in technological application because of culture media mixing that does not allow direct incorporation of techniques from stem cell biology, such as organoids. Here, we describe a detailed alternative method to cultivate millimeter-scale functional vascularized tissues on a biofabricated platform, termed 'integrated vasculature for assessing dynamic events', that enables facile incorporation of organoid technology. Utilizing the 3D stamping technique with a synthetic polymeric elastomer, a scaffold termed 'AngioTube' is generated with a central microchannel that has the mechanical stability to support a perfusable vascular system and the self-assembly of various parenchymal tissues. We demonstrate an increase in user familiarity and content analysis by situating the scaffold on a footprint of a 96-well plate. Uniquely, the platform can be used for facile connection of two or more tissue compartments in series through a common vasculature. Built-in micropores enable the studies of cell invasion involved in both angiogenesis and metastasis. We describe how this protocol can be applied to create both vascularized cardiac and hepatic tissues, metastatic breast cancer tissue and personalized pancreatic cancer tissue through incorporation of patient-derived organoids. Platform assembly to populating the scaffold with cells of interest into perfusable functional vascularized tissue will require 12-14 d and an additional 4 d if pre-polymer and master molds are needed.

Prediction of in vivo supersaturation and precipitation of poorly water-soluble drugs: Achievements and aspirations

This review focuses on options available to a pharmaceutical scientist to predict in vivo supersaturation and precipitation of poorly water-soluble drugs. As no single device or system can simulate the complex gastrointestinal environment, a combination of appropriate in vitro tools may be utilized to get optimal predictive information. To address the empirical issues encountered during small-scale and full-scale in vitro predictive testing, theoretical background and relevant case studies are discussed. The practical considerations for selection of appropriate tools at various stages of drug development are recommended. Upcoming technologies that have potential to further reduce in vivo studies and expedite the drug development process are also discussed.

Redox-responsive prodrug for improving oral bioavailability of paclitaxel through bile acid transporter-mediated pathway

Most anticancer drugs are not orally bioavailable due to their undesirable physicochemical properties and inherent physiological barriers. In this study, a polymeric prodrug strategy was presented to enhance the oral bioavailability of BCS class IV drugs using paclitaxel (PTX) as the model drug. PTX was covalently conjugated with cholic acid-functionalized PEG by a redox-sensitive disulfide bond. Cholic acid-functionalized PEGylated PTX (CPP) achieved remarkably improved PTX solubility (>30,000-fold), as well as favorable stability under the physiological environment and controlled drug release in the tumor. Meanwhile, CPP could self-assemble into nanoparticles with an average size of 56.18 ± 2.06 nm and drug loading up to 17.6% (w/w). Then, permeability study on Caco-2 cell monolayers demonstrated that CPP obtained an approximately 4-fold increase by apical sodium-dependent bile acid transporter (ASBT) mediated transport, compared with Taxol®. Pharmacokinetic studies carried out in rats confirmed that the oral bioavailability of CPP was 10-fold higher than that of Taxol®. Finally, significant improvement in the antitumor efficacy of CPP against breast cancer was confirmed on MDA-MB-231 cells. In summary, this prodrug-based cascade strategy offers new ways for chemotherapeutic drugs whose oral delivery is limited by solubility and permeability, also endows drugs with the capacity of tumor-specific release.

Dose-Dependent Solubility-Permeability Interplay for Poorly Soluble Drugs under Non-Sink Conditions

We investigated the solubility-permeability interplay using a solubilizer additive under non-sink conditions. Sodium lauryl sulfate (SLS) was used as a solubilizer additive. The solubility and permeability of two poorly soluble drugs at various doses, with or without SLS, were evaluated by flux measurements. The total permeated amount of griseofulvin, which has high permeability, increased by the addition of SLS. On the other hand, triamcinolone, which has low permeability, showed an almost constant rate of permeation regardless of the SLS addition. The total permeated amount of griseofulvin increased by about 20-30% when the dose amount exceeded its solubility, whereas its concentration in the donor chamber remained almost constant. However, the total permeated amount of triamcinolone was almost constant regardless of dose amount. These results suggest that the permeability of the unstirred water layer (UWL) may be affected by SLS and solid drugs for high-permeable drugs. The effect of solid drugs could be explained by a reduction in the apparent UWL thickness. For the appropriate evaluation of absorption, it would be essential to consider these effects.

Regional Intestinal Drug Absorption: Biopharmaceutics and Drug Formulation

The gastrointestinal tract (GIT) can be broadly divided into several regions: the stomach, the small intestine (which is subdivided to duodenum, jejunum, and ileum), and the colon. The conditions and environment in each of these segments, and even within the segment, are dependent on many factors, e.g., the surrounding pH, fluid composition, transporters expression, metabolic enzymes activity, tight junction resistance, different morphology along the GIT, variable intestinal mucosal cell differentiation, changes in drug concentration (in cases of carrier-mediated transport), thickness and types of mucus, and resident microflora. Each of these variables, alone or in combination with others, can fundamentally alter the solubility/dissolution, the intestinal permeability, and the overall absorption of various drugs. This is the underlying mechanistic basis of regional-dependent intestinal drug absorption, which has led to many attempts to deliver drugs to specific regions throughout the GIT, aiming to optimize drug absorption, bioavailability, pharmacokinetics, and/or pharmacodynamics. In this Editorial we provide an overview of the Special Issue "Regional Intestinal Drug Absorption: Biopharmaceutics and Drug Formulation". The objective of this Special Issue is to highlight the current progress and to provide an overview of the latest developments in the field of regional-dependent intestinal drug absorption and delivery, as well as pointing out the unmet needs of the field.

Orally Administered Drug Solubility-Enhancing Formulations: Lesson Learnt from Optimum Solubility-Permeability Balance

Although oral drug delivery is considered as most acceptable route for administering the active pharmaceutical ingredients to patients of all age-groups with the exceptions of bed-ridden patients and infants, the extent and rate of drug reaching the systemic circulation (in other word, drug bioavailability) always depends on many factors such as drug solubility in gastrointestinal fluids and drug permeation into intraluminal epithelial membrane structure, absence (fasting state) and presence (fed state) of food materials in the gastrointestinal tract, and individual variations in gastric emptying time. Taking the most influential factors like drug solubility and its permeability into consideration, these two factors play a pivotal role and even act as the litmus test for the formulation scientists who involve in oral dosage form development. It is very clear that there should be an optimum solubility and permeability balance to be reachable for getting the desired drug bioavailability to exert the intended therapeutic activity. The objectives of current review are (1) to provide an overview of two-different categories of poorly water soluble API molecules, (2) to describe briefly three-different case studies taken from drug solubility-enhancing formulations dealing with interplay between solubility and permeability, and (3) to showcase selected examples of solubility-permeability interplay phenomena arising out from the various orally administrable dosage forms. The lessons learnt from the past and current literatures are certainly encouraging to go ahead for oral dosage form development but with the prior knowledge about the possible existence of solubility-permeability interplay/tradeoff phenomenon.

Automated Experimentation Powers Data Science in Chemistry

Data science has revolutionized chemical research and continues to break down barriers with new interdisciplinary studies. The introduction of computational models and machine learning (ML) algorithms in combination with automation and traditional experimental techniques has enabled scientific advancement across nearly every discipline of chemistry, from materials discovery, to process optimization, to synthesis planning. However, predictive tools powered by data science are only as good as their data sets and, currently, many of the data sets used to train models suffer from several limitations, including being sparse, limited in scope and requiring human curation. Likewise, computational data faces limitations in terms of accurate modeling of nonideal systems and can suffer from low translation fidelity from simulation to real conditions. The lack of diverse data and the need to be able to test it experimentally reduces both the accuracy and scope of the predictive models derived from data science. This Account contextualizes the need for more complex and diverse experimental data and highlights how the seamless integration of robotics, machine learning, and data-rich monitoring techniques can be used to access it with minimal human labor.We propose three broad categories of data in chemistry: data on fundamental properties, data on reaction outcomes, and data on reaction mechanics. We highlight flexible, automated platforms that can be deployed to acquire and leverage these data. The first platform combines solid- and liquid-dosing modules with computer vision to automate solubility screening, thereby gathering fundamental data that are necessary for almost every experimental design. Using computer vision offers the additional benefit of creating a visual record, which can be referenced and used to further interrogate and gain insight on the data collected. The second platform iteratively tests reaction variables proposed by a ML algorithm in a closed-loop fashion. Experimental data related to reaction outcomes are fed back into the algorithm to drive the discovery and optimization of new materials and chemical processes. The third platform uses automated process analytical technology to gather real-time data related to reaction kinetics. This system allows the researcher to directly interrogate the reaction mechanisms in granular detail to determine exactly how and why a reaction proceeds, thereby enabling reaction optimization and deployment.

Adequate formulation approach for oral chemotherapy: Etoposide solubility, permeability, and overall bioavailability from cosolvent- vs. vitamin E TPGS-based delivery systems

Injectable-to-oral conversions for anticancer drugs represent an important trend. The goal of this research was to investigate the suitability of formulation approaches for anticancer oral drug delivery, aiming to reveal mechanistic insights that may guide oral chemotherapy development. TPGS vs. PEG-400 were studied as oral formulations for the anticancer drug etoposide, accounting for drug solubility, biorelevant dissolution, permeability, solubility-permeability interplay, and overall bioavailability. Increased etoposide solubility was demonstrated with both excipients. Biorelevant dissolution revealed that TPGS or PEG-400, but not aqueous suspension, allowed complete dissolution of the entire drug dose. Both TPGS and PEG-400 resulted in decreased in-vitro etoposide permeability across artificial membrane, i.e. solubility-permeability tradeoff. While PEG-400 resulted in the same solubility-permeability tradeoff also in-vivo, TPGS showed the opposite trend: the in-vivo permeability of etoposide was markedly increased in the presence of TPGS. This increased permeability was similar to the drug permeability under P-gp inhibition. Rat PK study demonstrated significantly higher etoposide bioavailability from TPGS vs. PEG-400 or suspension (AUC of 72, 41, and 26 µg·min/mL, respectively). All in all, TPGS-based delivery system allows overcoming the solubility-permeability tradeoff, increasing systemic etoposide exposure. Since poor solubility and strong efflux are common to many anticancer agents, this work can aid in the development of better oral delivery approach for chemotherapeutic drugs.

Sacubitril-valsartan cocrystal revisited: role of polymer excipients in the formulation

Objectives: This study investigated the impact of polymer excipients on a typical cocrystal for sacubitril (SAC) and valsartan (VAL), aiming to guide optional formulation design and maximize oral bioavailability.Methods: Poly vinyl pyrrolidone (PVP) and hydroxypropyl cellulose (HPC) and hydroxypropyl methylcellulose (HPMC) were selected. The dissolution/permeation system was used to predict both the kinetics of drug supersaturation and the simple permeation. The intermolecular interaction was analyzed by ¹H NMR spectroscopy and molecular dynamics simulation. Pharmacokinetic study was performed to assess the impact of polymer excipients in vivo.Results: Our study found that unappreciated excipients in the formulation, especially some polymers, might compete with the intermolecular hydrogen bonding among the cocrystals components and provide unexpected affinity, and thus leverage the therapeutic benefits. HPMC as a coating excipient used in the Entresto® tablet hampered the supersaturation of API, which led to the poor oral absorption of cocrystals. Conversely, PVP appeared to promote and maintain drug supersaturation, resulting in improved bioavailability of API.Conclusion: In conclusion, understanding the interplay between the cocrystal components and polymers is the key to optimizing the excipients to maximize the performance of cocrystal based oral drug formulation.