Incorporation of biodegradable nanoparticles into human airway epithelium cells-in vitro study of the suitability as a vehicle for drug or gene delivery in pulmonary diseases

A Comprehensive Review of Nanoparticles: From Classification to Application and Toxicity

Nanoparticles are structures that possess unique properties with high surface area-to-volume ratio. Their small size, up to 100 nm, and potential for surface modifications have enabled their use in a wide range of applications. Various factors influence the properties and applications of NPs, including the synthesis method and physical attributes such as size and shape. Additionally, the materials used in the synthesis of NPs are primary determinants of their application. Based on the chosen material, NPs are generally classified into three categories: organic, inorganic, and carbon-based. These categories include a variety of materials, such as proteins, polymers, metal ions, lipids and derivatives, magnetic minerals, and so on. Each material possesses unique attributes that influence the activity and application of the NPs. Consequently, certain NPs are typically used in particular areas because they possess higher efficiency along with tenable toxicity. Therefore, the classification and the base material in the NP synthesis hold significant importance in both NP research and application. In this paper, we discuss these classifications, exemplify most of the major materials, and categorize them according to their preferred area of application. This review provides an overall review of the materials, including their application, and toxicity.

Design, optimization, and evaluation of methotrexate loaded and albumin coated polymeric nanoparticles

Methotrexate is a potent anticancer drug whose strong efflux is facilitated by the brain's efflux transporter. As an efflux transporter blocker, albumin increased the drug's concentration in the brain. Methotrexate-loaded nanoparticles were produced by evaporating the emulsification fluid. Improvements and analyses were made to the following aspects of the generated nanoparticles: size, polydispersity, zeta potential, entrapment efficiency, percentage yield, scanning electron microscopy, in vitro drug release studies, and sterilization. The particle size was determined to be in the nano range, and homogeneity of particle size was suggested by a low polydispersity index result. Particle diameters of 168 nm were observed in the F5 preparation, and zeta potential values of -1.5 mV suggested that the preparation produced adequate repulsive interactions between the nanoparticles. Albumin and dopamine HCl were employed to coat the methotrexate-loaded nanoparticles to guarantee that the brain received an adequate amount of them. The homogeneity of albumin coated nanoparticles was demonstrated by the low% PDI values of 0.129 and 0.122 for albumin coated nanoparticles (MNPs-Alb) and polymerized dopamine HCl and albumin coated nanoparticles (MNPs-PMD-Alb), respectively. After 48 h of incubation, the cell viability measured at the same drug concentration (5 mg) decreased for the F5, albumin coated nanoparticles, polymerized dopamine HCl coated nanoparticles, and polymerized dopamine HCl and albumin coated nanoparticles, respectively. Our primary findings demonstrate that the albumin nanoparticles containing methotrexate are designed to deliver the drug gradually. With minimal cytotoxicity, the intended preparation might give the brain an appropriate dosage of methotrexate.

Extracellular matrix component-derived nanoparticles for drug delivery and tissue engineering

The extracellular matrix (ECM) consists of a complex combination of proteins, proteoglycans, and other biomolecules. ECM-based materials have been demonstrated to have high biocompatibility and bioactivity, which may be harnessed for drug delivery and tissue engineering applications. Herein, nanoparticles incorporating ECM-based materials and their applications in drug delivery and tissue engineering are reviewed. Proteins such as gelatin, collagen, and fibrin as well as glycosaminoglycans including hyaluronic acid, chondroitin sulfate, and heparin have been employed for cancer therapeutic delivery, gene delivery, and wound healing and regenerative medicine. Strategies for modifying and functionalizing these materials with synthetic and natural polymers or to enable stimuli-responsive degradation and drug release have increased the efficacy of these materials and nano-systems. The incorporation and modification of ECM-based materials may be used to drive drug targeting and increase tissue-specific cell differentiation more effectively.

Lessons from the history of inorganic nanoparticles for inhalable diagnostics and therapeutics

The respiratory tract is one of the most accessible ones to exogenous nanoparticles, yet drug delivery by their means to it is made extraordinarily challenging because of the plexus of aerodynamic, hemodynamic and biomolecular factors at cellular and extracellular levels that synergistically define the safety and efficacy of this process. Here, the use of inorganic nanoparticles (INPs) for inhalable diagnostics and therapies of the lung is viewed through the prism of the history of studies on the interaction of INPs with the lower respiratory tract. The most conceptually and methodologically innovative and illuminative studies are referred to in the chronological order, as they were reported in the literature, and the trends in the progress of understanding this interaction of immense therapeutic and toxicological significance are being deduced from it. The most outstanding actual trends delineated include the diminishment of toxicity via surface functionalization, cell targeting, tagging and tracking via controlled binding and uptake, hybrid INP treatments, magnetic guidance, combined drug and gene delivery, use as adjuvants in inhalable vaccines, and other. Many of the understudied research directions, which have been accomplished by the nanostructured organic polymers in the pulmonary niche, are discussed. The progress in the use of INPs as inhalable diagnostics or therapeutics has been hampered by their well-recognized inflammatory potential and toxicity in the respiratory tract. However, the annual numbers of methodologically innovative studies have been on the rise throughout the past two decades, suggesting that this is a prolific direction of research, its comparatively poor commercial takings notwithstanding. Still, the lack of consensus on the effects of many INP compositions at low but therapeutically effective doses, the plethora of contradictory reports on ostensibly identical chemical compositions and NP properties, and the many cases of antagonism in combinatorial NP treatments imply that the rational design of inhalable medical devices based on INPs must rely on qualitative principles for the most part and embrace a partially stochastic approach as well. At the same time, the fact that the most studied INPs for pulmonary applications have been those with some of the thickest records of pulmonary toxicity, e.g., carbon, silver, gold, silica and iron oxide, is a silent call for the expansion of the search for new inorganic compositions for use in inhalable therapies to new territories.

Inhalative Nanoparticulate CpG Immunotherapy in Severe Equine Asthma: An Innovative Therapeutic Concept and Potential Animal Model for Human Asthma Treatment

Simple Summary

Severe equine asthma is the most common globally widespread non-infectious equine respiratory disease (together with its mild and moderate form), which is associated with exposure to hay dust and mold spores, has certain similarities to human asthma, and continues to represent a therapeutic problem. Immunomodulatory DNA sequences (CpG) bound to nanoparticles were successfully administered by inhalation to severe asthmatic horses in several studies. It was possible to demonstrate a significant, sustained, one-to-eight-week improvement in important clinical parameters: partial oxygen pressure in the blood, quantity and viscosity of tracheal mucus secretion in the airways, and the amount of inflammatory cells in the respiratory tracts of severe asthmatic horses. The immunotherapy with CpG is performed independent of specific allergens. At an immunological level, the treatment leads to decreases in allergic and inflammatory parameters. This innovative therapeutic concept thus opens new perspectives in severe equine asthma treatment and possibly also in human asthma treatment.

Abstract

Severe equine asthma is the most common globally widespread non-infectious equine respiratory disease (together with its mild and moderate form), which is associated with exposure to hay dust and mold spores, has certain similarities to human asthma, and continues to represent a therapeutic problem. Immunomodulatory CpG-ODN, bound to gelatin nanoparticles as a drug delivery system, were successfully administered by inhalation to severe equine asthmatic patients in several studies. It was possible to demonstrate a significant, sustained, and allergen-independent one-to-eight-week improvement in key clinical parameters: the arterial partial pressure of oxygen, the quantity and viscosity of tracheal mucus, and neutrophilic inflammatory cells in the respiratory tracts of the severe equine asthmatic subjects. At the immunological level, an upregulation of the regulatory antiallergic and anti-inflammatory cytokine IL-10 as well as a downregulation of the proallergic IL-4 and proinflammatory IFN-γ in the respiratory tracts of the severe equine asthmatic patients were identified in the treatment groups. CD4⁺ T lymphocytes in the respiratory tracts of the asthmatic horses were demonstrated to downregulate the mRNA expression of Tbet and IL-8. Concentrations of matrix metalloproteinase-2 and -9 and tissue inhibitors of metalloproteinase-2 were significantly decreased directly after the treatment as well as six weeks post-treatment. This innovative therapeutic concept thus opens new perspectives in the treatment of severe equine asthma and possibly also that of human asthma.

Antiviral potential of nanoparticles for the treatment of Coronavirus infections

BACKGROUND

On 31st December 2019 in Wuhan, China, severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), was acknowledged. This virus spread quickly throughout the world causing a global pandemic. The World Health Organization declared COVID-19 a pandemic disease on 11th March 2020. Since then, the whole world has come together and have developed several vaccines against this deadly virus. Similarly, several alternative searches for pandemic disease therapeutics are still ongoing. One of them has been identified as nanotechnology. It has demonstrated significant promise for detecting and inhibiting a variety of viruses, including coronaviruses. Several nanoparticles, including gold nanoparticles, silver nanoparticles, quantum dots, carbon dots, graphene oxide nanoparticles, and zinc oxide nanoparticles, have previously demonstrated remarkable antiviral activity against a diverse array of viruses.

OBJECTIVE

This review aims to provide a basic and comprehensive overview of COVID-19's initial global outbreak and its mechanism of infiltration into human host cells, as well as the detailed mechanism and inhibitory effects of various nanoparticles against this virus. In addition to nanoparticles, this review focuses on the role of several antiviral drugs used against COVID-19 to date.

CONCLUSION

COVID-19 has severely disrupted the social and economic lives of people all over the world. Due to a lack of adequate medical facilities, countries have struggled to maintain control of the situation. Neither a drug nor a vaccine has a 100% efficacy rate. As a result, nanotechnology may be a better therapeutic alternative for this pandemic disease.

Potentials of nanotechnology in treatment of methicillin-resistant Staphylococcus aureus

Abuse of antibiotics has led to the emergence of drug-resistant pathogens. Methicillin-resistant Staphylococcus aureus (MRSA) was reported just two years after the clinical use of methicillin, which can cause severe infections with high morbidity and mortality in both community and hospital. The treatment of MRSA infection is greatly challenging since it has developed the resistance to almost all types of antibiotics. As such, it is of great significance and importance to develop novel therapeutic approaches. The fast development of nanotechnology provides a promising solution to this dilemma. Functional nanomaterials and nanoparticles can act either as drug carriers or as antibacterial agents for antibacterial therapy. Herein, we aim to provide a comprehensive understanding of the drug resistance mechanisms of MRSA and discuss the potential applications of some functionalized nanomaterials in anti-MRSA therapy. Also, the concerns and possible solutions for the nanomaterials-based anti-MRSA therapy are discussed.

Biodegradable Nanoparticles: A Recent Approach and Applications

Biodegradable nanoparticles (NPs) are the novel carriers for the administration of drug molecules. Biodegradable nanoparticles have become popular recently because of their special features such as targeted delivery of drugs, improved bioavailability, and better therapeutic effectiveness to administer the drug at a constant rate. Polymeric NPs are very small-sized polymeric colloidal elements in which a drug of interest may be encapsulated or incorporated in their polymeric network or conjugated or adsorbed on the layer. Various polymers are employed in the manufacturing of nanoparticles, some of the frequently employed polymers are agents, chitosan, cellulose, gelatin, gliadin, polylactic acid, polylactic-co-glycolic acid, and pullulan. Nanoparticles have been progressively explored for the delivery of targeted ARVs to cells of HIV-infected and have performed the prolonged kinetic release. Drug embedded in this system can give better effectiveness, diminished resistance of drugs, reduction in systemic toxicity and symptoms, and also enhanced patient compliance. The present review highlights the frequently employed manufacturing methods for biodegradable nanoparticles, various polymers used, and its application in anti-retroviral therapy. Also, common evaluation parameters to check the purity of nanoparticles, ongoing and recently concluded clinical trials and patents filled by the various researchers, and the future implication of biodegradable NPs in an innovative drug delivery system are described. The biodegradable NPs are promising systems for the administration of a broad variety of drugs including anti-retroviral drugs, and hence biodegradable nanoparticles can be employed in the future for the treatment of several diseases and disorders.

Asian bullfrog (Rana tigerina) skin gelatin extracted by ultrasound-assisted process: Characteristics and in-vitro cytotoxicity

Impact of ultrasound-assisted process (UAP) on yield and characteristics of Asian bullfrog (Rana tigerina) skin gelatin was studied and the in-vitro cytotoxicity of the resulting frog skin gelatin was evaluated using CaCo-2, Raw264.7 and L929 cell lines. Different ultrasonication modes (5 min on-time with 25 min off-time (5/25) and 10 min on-time with 50 min off-times (10/50)) were implemented for different total ultrasonication times (10-60 min) during gelatin extraction at 55 °C. UAP could effectively augment yield and recovery of frog skin gelatin, compared with the typical process (without UAP). Different UAPs used affected characteristics and properties of gelatin differently. Increased total ultrasonication time increased color changes and turbidity of resulting gelatin and induced protein fragmentation, regardless of modes used. At the same total ultrasonication time, mode of 10/50 provided gelatin with higher hydroxyproline content and higher gel strength than 5/25 mode. Gelatin extracted by UAP with 10/50 mode for 60 min (FU) possessed high yield and good gel property. Gelling and melting temperatures and FTIR-spectra of FU were similar to those of gel from typical process. Based on in-vitro cytotoxicity toward different cell lines, frog skin gelatin could be used as biocompatible material, which could be safe for human consumption.

PLGA-nanoparticles loaded with a thiosemicarbazone derived palladium(ii) complex as a potential agent to new formulations for human ovarian carcinoma treatment

The encapsulation process of the Pd^II complex [PdCl(PPh₃)(PrCh)], a promising cytotoxic agent on ovarian cancer cells, in PLGA polymer was studied. The cytotoxicity results showed that the formulation led to a significant reduction of the ovarian cell viability (80% at 1 μM).

The Role of Ligands in the Chemical Synthesis and Applications of Inorganic Nanoparticles

The design of nanoparticles is critical for their efficient use in many applications ranging from biomedicine to sensing and energy. While shape and size are responsible for the properties of the inorganic nanoparticle core, the choice of ligands is of utmost importance for the colloidal stability and function of the nanoparticles. Moreover, the selection of ligands employed in nanoparticle synthesis can determine their final size and shape. Ligands added after nanoparticle synthesis infer both new properties as well as provide enhanced colloidal stability. In this article, we provide a comprehensive review on the role of the ligands with respect to the nanoparticle morphology, stability, and function. We analyze the interaction of nanoparticle surface and ligands with different chemical groups, the types of bonding, the final dispersibility of ligand-coated nanoparticles in complex media, their reactivity, and their performance in biomedicine, photodetectors, photovoltaic devices, light-emitting devices, sensors, memory devices, thermoelectric applications, and catalysis.

Poly (ethyl 2-cyanoacrylate) nanoparticles (PECA-NPs) as possible agents in tumor treatment

Tumor eradication has many challenges due to the difficulty of selectively delivering anticancer drugs to malignant cells avoiding contact with healthy tissues/organs. The improvement of antitumor efficacy and the reduction of systemic side effects can be achieved using drug loaded nanoparticles. In this study, poly (ethyl 2-cyanoacrylate) nanoparticles (PECA-NPs) were prepared using an emulsion polymerization method and their potential for cancer treatment was investigated. The size, polydispersity index and zeta potential of prepared nanoparticles are about 80 nm, 0.08 and -39.7 mV, respectively. The stability test shows that the formulation is stable for 15 days, while an increase in particle size occurs after 30 days. TEM reveals the spherical morphology of nanoparticles; furthermore, FTIR and ¹H NMR analyses confirm the structure of PECA-NPs and the complete polymerization. The nanoparticles demonstrate an in vitro concentration-dependent cytotoxicity against human epithelial colorectal adenocarcinoma cell lines (Caco-2), as assessed by MTT assay. The anticancer activity of PECA-NPs was studied on 3D tumor spheroids models of hepatocellular carcinoma (HepG2) and kidney adenocarcinoma cells (A498) to better understand how the nanoparticles could interact with a complex structure such as a tumor. The results confirm the antitumor activity of PECA-NPs. Therefore, these systems can be considered good candidates in tumor treatment.

Air-Liquid Interface In Vitro Models for Respiratory Toxicology Research: Consensus Workshop and Recommendations

In vitro air-liquid interface (ALI) cell culture models can potentially be used to assess inhalation toxicology endpoints and are usually considered, in terms of relevancy, between classic (i.e., submerged) in vitro models and animal-based models. In some situations that need to be clearly defined, ALI methods may represent a complement or an alternative option to in vivo experimentations or classic in vitro methods. However, it is clear that many different approaches exist and that only very limited validation studies have been carried out to date. This means comparison of data from different methods is difficult and available methods are currently not suitable for use in regulatory assessments. This is despite inhalation toxicology being a priority area for many governmental organizations. In this setting, a 1-day workshop on ALI in vitro models for respiratory toxicology research was organized in Paris in March 2016 to assess the situation and to discuss what might be possible in terms of validation studies. The workshop was attended by major parties in Europe and brought together more than 60 representatives from various academic, commercial, and regulatory organizations. Following plenary, oral, and poster presentations, an expert panel was convened to lead a discussion on possible approaches to validation studies for ALI inhalation models. A series of recommendations were made and the outcomes of the workshop are reported.

Gelatin nanoparticles enhance delivery of hepatitis C virus recombinant NS2 gene

Background

Development of an effective non-viral vaccine against hepatitis C virus infection is of a great importance. Gelatin nanoparticles (Gel.NPs) have an attention and promising approach as a viable carrier for delivery of vaccine, gene, drug and other biomolecules in the body.

Aim of work

The present study aimed to develop stable Gel.NPs conjugated with nonstructural protein 2 (NS2) gene of Hepatitis C Virus genotype 4a (HCV4a) as a safe and an efficient vaccine delivery system.

Methods and results

Gel.NPs were synthesized and characterized (size: 150±2 nm and zeta potential +17.6 mv). NS2 gene was successfully cloned and expressed into E. coli M15 using pQE-30 vector. Antigenicity of the recombinant NS2 protein was confirmed by Western blotting to verify the efficiency of NS2 as a possible vaccine. Then NS2 gene was conjugated to gelatin nanoparticles and a successful conjugation was confirmed by labeling and imaging using Confocal Laser Scanning Microscope (CLSM). Interestingly, the transformation of the conjugated NS2/Gel.NPs complex into E. coli DH5-α was 50% more efficient than transformation with the gene alone. In addition, conjugated NS2/Gel.NPs with ratio 1:100 (w/w) showed higher transformation efficiency into E. coli DH5-α than the other ratios (1:50 and 2:50).

Conclusion

Gel.NPs effectively enhanced the gene delivery in bacterial cells without affecting the structure of NS2 gene and could be used as a safe, easy, rapid, cost-effective and non-viral vaccine delivery system for HCV.

Role of the Protein Corona Derived from Human Plasma in Cellular Interactions between Nanoporous Human Serum Albumin Particles and Endothelial Cells

The presence of a protein corona on various synthetic nanomaterials has been shown to strongly influence how they interact with cells. However, it is unclear if the protein corona also exists on protein particles, and if so, its role in particle-cell interactions. In this study, pure human serum albumin (HSA) particles were fabricated via mesoporous silica particle templating. Our data reveal that various serum proteins adsorbed on the particles, when exposed to human blood plasma, forming a corona. In human umbilical vein endothelial cells (HUVECs), the corona was shown to decrease particle binding to the cell membrane, increase the residence time of particles in early endosomes, and reduce the amount of internalized particles within the first hours of exposure to particles. These findings reveal important information regarding the mechanisms used by vascular endothelial cells to internalize protein-based particulate materials exposed to blood plasma. The ability to control the cellular recognition of these organic particles is expected to aid the advancement of HSA-based materials for intravenous drug delivery.

Cytotoxic effects of composite dust on human bronchial epithelial cells

INTRODUCTION

Previous research revealed that during routine abrasive procedures like polishing, shaping or removing of composites, high amounts of respirable dust particles (<5μm) including nano-sized particles (<100nm) may be released.

OBJECTIVE

To determine the cytotoxic potential of composite dust particles on bronchial epithelium cells.

METHODS

Composite dust of five commercial composites (one nano-composite, two nano-hybrid and two hybrid composites) was generated following a clinically relevant protocol. Polymerized composite samples were cut with a rough diamond bur (grain size 100μm, speed 200,000rpm) and all composite dust was collected in a sterile chamber. Human bronchial epithelial cells (16HBE14o-) were exposed to serially diluted suspensions of composite dust in cell culture medium at concentrations between 1.1 and 3.3mg/ml. After 24h-exposure, cell viability and membrane integrity were assessed by the WST-1 and the LDH leakage assay, respectively. The release of IL-1β and IL-6 was evaluated. The composite dust particles were characterized by transmission electron microscopy and by dynamic and electrophoretic light scattering.

RESULTS

Neither membrane damage nor release of IL-1β was detected over the complete concentration range. However, metabolic activity gradually declined for concentrations higher than 660μg/ml and the release of IL-6 was reduced when cells were exposed to the highest concentrations of dust.

SIGNIFICANCE

Composite dust prepared by conventional dental abrasion methods only affected human bronchial epithelial cells in very high concentrations.

Maghemite-human serum albumin hybrid nanoparticles: towards a theranostic system with high MRI r2* relaxivity

Human Serum Albumin (HSA) is the most abundant plasma protein in human blood, and therefore, it is the material of choice for the development of particulate formulations due to its biodegradable and biocompatible nature. Over the last decade, HSA nanoparticles (NPs) have been prepared mostly using desolvation techniques and evaluated as promising drug carriers. In addition, controlling the particle size has become a primary concern while formulating such nanoparticulate systems. Since many of these HSA-based carrier systems have often demonstrated batch-to-batch fabrication variability, significant efforts have been made to develop and characterize HSA-based NPs featuring a robust and controllable particle size, by using a desolvation/cross-linking-type Divinyl Sulfone (DVS)-mediated nanofabrication method. For this purpose and for global multi-parameter fabrication process optimization, a statistically significant Design of Experiment (DoE, MINITAB® 17 DoE software) methodology has been successfully implemented. It aimed to disclose an optimal set of HSA NP fabrication conditions in order to afford highly reproducible and stable 23.05 ± 5.3 nm-sized DoE-globally optimized core HSA NPs. Due to the use of bifunctional DVS as a cross-linker for the preparation of such DoE-optimized HSA NPs, their surface contains a variety of free functional groups which are available for further second step functional modifications. Moreover, related hybrid organic/inorganic nanosystems consisting of DoE-optimized HSA NPs that encapsulated hydrophilic (NH₄)₂Ce(IV)(NO₃)₆ (Ceric Ammonium Nitrate - CAN) modified γ-Fe₂O₃ NPs (CAN-maghemite or CAN-γ-Fe₂O₃ NPs), which enable medical imaging using magnetic resonance imaging (MRI), have also been fabricated and characterized. The resulting hybrid magnetic NPs are a quite powerful T₂* contrast agent (r₂* of 482 mM^-1 s^-1), which may be used as a powerful dual phase platform for both therapeutic (drug delivery) and diagnostic imaging (MRI) applications.

Dual-functionalisation of gelatine nanoparticles with an anticancer platinum(ii)–bisphosphonate complex and mineral-binding alendronate

Mineral-binding gelatine nanoparticles can be loaded with tailored amounts of anticancer molecules, which may benefit the development of bone-seeking carriers for targeted delivery of drugs to treat bone tumours.

Nanoparticulate CpG immunotherapy in RAO-affected horses: phase I and IIa study

Background

Recurrent airway obstruction (RAO), an asthma‐like disease, is 1 of the most common allergic diseases in horses in the northern hemisphere. Hypersensitivity reactions to environmental antigens cause an allergic inflammatory response in the equine airways. Cytosine‐phosphate‐guanosine‐oligodeoxynucleotides (CpG‐ODN) are known to direct the immune system toward a Th1‐pathway, and away from the pro‐allergic Th2‐line (Th2/Th1‐shift). Gelatin nanoparticles (GNPs) are biocompatible and biodegradable immunological inert drug delivery systems that protect CpG‐ODN against nuclease degeneration. Preliminary studies on the inhalation of GNP‐bound CpG‐ODN in RAO‐affected horses have shown promising results.

Objectives

The aim of this study was to evaluate the clinical and immunological effects of GNP‐bound CpG‐ODN in a double‐blinded, placebo‐controlled, prospective, randomized clinical trial and to verify a sustained effect post‐treatment.

Animals and Methods

Twenty‐four RAO‐affected horses received 1 inhalation every 2 days for 5 consecutive administrations. Horses were examined for clinical, endoscopic, cytological, and blood biochemical variables before the inhalation regimen (I), immediately afterwards (II), and 4 weeks post‐treatment (III).

Results

At time points I and II, administration of treatment rather than placebo corresponded to a statistically significant decrease in respiratory effort, nasal discharge, tracheal secretion, and viscosity, AaDO₂ and neutrophil percentage, and an increase in arterial oxygen pressure.

Conclusion and Clinical Importance

Administration of a GNP‐bound CpG‐ODN formulation caused a potent and persistent effect on allergic and inflammatory‐induced clinical variables in RAO‐affected horses. This treatment, therefore, provides an innovative, promising, and well‐tolerated strategy beyond conventional symptomatic long‐term therapy and could serve as a model for asthma treatment in humans.

PEGylated human serum albumin (HSA) nanoparticles: preparation, characterization and quantification of the PEGylation extent

Modification with poly(ethylene glycol) (PEG) is a widely used method for the prolongation of plasma half-life of colloidal carrier systems such as nanoparticles prepared from human serum albumin (HSA). However, the quantification of the PEGylation extent is still challenging. Moreover, the influence of different PEG derivatives, which are commonly used for nanoparticle conjugation, has not been investigated so far. The objective of the present study is to develop a method for the quantification of PEG and to monitor the influence of diverse PEG reagents on the amount of PEG linked to the surface of HSA nanoparticles. A size exclusion chromatography method with refractive index detection was established which enabled the quantification of unreacted PEG in the supernatant. The achieved results were confirmed using a fluorescent PEG derivative, which was detected by photometry and fluorimetry. Additionally, PEGylated HSA nanoparticles were enzymatically digested and the linked amount of fluorescently active PEG was directly determined. All the analytical methods confirmed that under optimized PEGylation conditions a PEGylation efficiency of up to 0.5 mg PEG per mg nanoparticle could be achieved. Model calculations made a 'brush' conformation of the PEG chains on the particle surface very likely. By incubating the nanoparticles with fetal bovine serum the reduced adsorption of serum proteins on PEGylated HSA nanoparticles compared to non-PEGylated HSA nanoparticles was demonstrated using sodium dodecylsulfate polyacrylamide gel electrophoresis. Finally, the positive effect of PEGylation on plasma half-life was demonstrated in an in vivo study in mice. Compared to unmodified nanoparticles the PEGylation led to a four times larger plasma half-life.

Parameters and characteristics governing cellular internalization and trans-barrier trafficking of nanostructures

Cellular internalization and trans-barrier transport of nanoparticles can be manipulated on the basis of the physicochemical and mechanical characteristics of nanoparticles. Research has shown that these factors significantly influence the uptake of nanoparticles. Dictating these characteristics allows for the control of the rate and extent of cellular uptake, as well as delivering the drug-loaded nanosystem intra-cellularly, which is imperative for drugs that require a specific cellular level to exert their effects. Additionally, physicochemical characteristics of the nanoparticles should be optimal for the nanosystem to bypass the natural restricting phenomena of the body and act therapeutically at the targeted site. The factors at the focal point of emerging smart nanomedicines include nanoparticle size, surface charge, shape, hydrophobicity, surface chemistry, and even protein and ligand conjugates. Hence, this review discusses the mechanism of internalization of nanoparticles and ideal nanoparticle characteristics that allow them to evade the biological barriers in order to achieve optimal cellular uptake in different organ systems. Identifying these parameters assists with the progression of nanomedicine as an outstanding vector of pharmaceuticals.

Endocytosis of environmental and engineered micro- and nanosized particles

There are many studies with cells to find out how particles interact with them. In contrast to micronsized particles, which are actively taken up by phagocytosis or macropinocytosis, nanosized particles may be taken up by cells through different endocytic pathways or by another, yet to be defined mechanism. There is increasing evidence that it is the nanosized particles, which are a particular risk because of their high content of organic chemicals and their pro-oxidative potential due to the high surface-to-volume ratio of the particles as compared to the bulk material. It is the goal of this article to create an understanding for the interaction of particles with biological systems, with particular consideration of the interaction of nanoparticles (NPs) with lung cells. One is attempting to understand, how NPs interact with cellular membranes, as it is hardly known, how they are taken up by cells, how they are trafficking in cells, and how they interact with subcellular compartments, such as with mitochondria or with the nucleus. Cells tend to defend themselves against any foreign material, which is taken up. In general, they try to eliminate particulate intruders and this is what they usually manage with micronsized particles. However, with NPs it is different. NPs may not be eliminated easily, and, hence may stimulate the cells to react in an unfavorable way. What we can learn is that NPs behave differently than microparticles.

Gelatin-based nanoparticles as drug and gene delivery systems: reviewing three decades of research

Gelatin is one of the most versatile natural biopolymers widely used in pharmaceutical industries due to its biocompatibility, biodegradability, low cost and numerous available active groups for attaching targeting molecules. These advantages led to its application in the synthesis of nanoparticles for drug and gene delivery during the last thirty years. The current article entails a general review of the different preparation techniques of gelatin nanoparticles (GNPs): desolvation, coacervation-phase separation, emulsification-solvent evaporation, reverse phase microemulsion, nanoprecipitation, self-assembly and layer-by-layer coating, from the point of view of the methodological and mechanistic aspects involved. Various crosslinkers used to improve the physicochemical properties of GNPs includintg aldehydes, genipin, carbodiimide/N-hydroxysuccinimide, and transglutaminase are reported. An analysis is given of the physicochemical behavior of GNPs including drug loading, release, particle size, zeta-potential, cytotoxicity, cellular uptake and stability. This review also attempts to provide an overview of the major applications of GNPs in drug delivery and gene therapy and their in vivo pharmacological performances, as well as site-specific drug targeting using various ligands modifying the surface of GNPs. Finally, nanocomplexes of gelatin with polymers, lipids or inorganic materials are also discussed.

Cubic magnetically guided nanoaggregates for inhalable drug delivery: in vitro magnetic aerosol deposition study

The present work describes the in vitro aerosol deposition and enhanced deaggregation behavior of superparamagnetic iron oxide nanoaggregates (SPIONs). SPIONs were surface-coated with amine functionalized polyrotaxane and were proposed as a carrier for inhalation dry powders. Polyrotaxane is primarily composed of beta cyclodextrin rings which are spontaneously threaded on the block copolymer, poly(propylene glycol) bis(2-aminopropylether). Variable concentrations of surface coating polymers showed controlled manipulation of the crystal size and morphology. Magnetic nanoaggregates fabricated with low concentration of polyrotaxane showed cubic crystal morphology. However, these nanoaggregates exhibited rhombic dodecahedron crystal structure upon increasing the coating polymer concentration. In comparison to the spherical uncoated magnetic nanoparticles, cubic phase magnetic nanoaggregates demonstrated an enhanced in vitro aerosol deposition using magnetic field alignment. This enhancement can be accomplished at low inhalation flow rates (15 and 30 L/min). However, transformation to the cubic crystal structure was observed to be associated with a reduction in the powder geometric standard deviation. Using a mathematical modeling approach, we noted significant enhancement in the deaggregation behavior of inhalation dry powders; that can be achieved with small amounts of magnetic nanoaggregates. Aggregates of cubic nanoparticles showed promise for targeted pulmonary deposition of anticancer drugs.

Emerging applications of nanoparticles for lung cancer diagnosis and therapy

Lung cancer is by far the leading cause of cancer-related mortality worldwide, most of them being active tobacco smokers. Non small cell lung cancer accounts for around 85% to 90% of deaths, whereas the rest is contributed by small cell lung cancer. The extreme lethality of lung cancer arises due to lack of suitable diagnostic procedures for early detection of lung cancer and ineffective conventional therapeutic strategies. In course with desperate attempts to address these issues independently, a multifunctional nanotherapeutic or diagnostic system is being sought as a favorable solution. The manifestation of physiochemical properties of such nanoscale systems is tuned favorably to come up with a versatile cancer cell targeted diagnostic and therapeutic system. Apart from this, the aspect of being at nanoscale by itself confers the system with an advantage of passive accumulation at the site of tumor. This review provides a broad perspective of three major subclasses of such nanoscale therapeutic and diagnostic systems which include polymeric nanoparticles-based approaches, metal nanoparticles-based approaches, and bio-nanoparticles-based approaches. This review work also serves the purpose of gaining an insight into the pros and cons of each of these approaches with a prospective improvement in lung cancer therapeutics and diagnostics.

Albumin-based nanoparticles as potential controlled release drug delivery systems

Albumin, a versatile protein carrier for drug delivery, has been shown to be nontoxic, non-immunogenic, biocompatible and biodegradable. Therefore, it is ideal material to fabricate nanoparticles for drug delivery. Albumin nanoparticles have gained considerable attention owing to their high binding capacity of various drugs and being well tolerated without any serious side-effects. The current review embodies an in-depth discussion of albumin nanoparticles with respect to types, formulation aspects, major outcomes of in vitro and in vivo investigations as well as site-specific drug targeting using various ligands modifying the surface of albumin nanoparticles with special insights to the field of oncology. Specialized nanotechnological techniques like desolvation, emulsification, thermal gelation and recently nano-spray drying, nab-technology and self-assembly that have been investigated for fabrication of albumin nanoparticles, are also discussed. Nanocomplexes of albumin with other components in the area of drug delivery are also included in this review.

Polymer-based microparticles in tissue engineering and regenerative medicine

Different types of biomaterials, processed into different shapes, have been proposed as temporary support for cells in tissue engineering (TE) strategies. The manufacturing methods used in the production of particles in drug delivery strategies have been adapted for the development of microparticles in the fields of TE and regenerative medicine (RM). Microparticles have been applied as building blocks and matrices for the delivery of soluble factors, aiming for the construction of TE scaffolds, either by fusion giving rise to porous scaffolds or as injectable systems for in situ scaffold formation, avoiding complicated surgery procedures. More recently, organ printing strategies have been developed by the fusion of hydrogel particles with encapsulated cells, aiming the production of organs in in vitro conditions. Mesoscale self-assembly of hydrogel microblocks and the use of leachable particles in three-dimensional (3D) layer-by-layer (LbL) techniques have been suggested as well in recent works. Along with innovative applications, new perspectives are open for the use of these versatile structures, and different directions can still be followed to use all the potential that such systems can bring. This review focuses on polymeric microparticle processing techniques and overviews several examples and general concepts related to the use of these systems in TE and RE applications. The use of materials in the development of microparticles from research to clinical applications is also discussed.

The potential for the noninvasive delivery of polymeric nanocarriers using propellant-based inhalers in the treatment of Chlamydial respiratory infections

A novel strategy for pulmonary delivery of polymeric nanocarriers (NCs) pressurized-metered dose inhalers (pMDIs) is reported in this work. Core-shell particles consisting of a water soluble, hydrofluoroalkane(HFA)-philic biodegradable copolymer of chitosan and poly(lactic acid), and a core of poly(d,l-lactide-co-glycolide) (PLGA) NCs were prepared by a modified emulsification-diffusion methodology. Dispersions of the core-shell particles in HFA propellant revealed enhanced physical stability compared to polymeric NCs alone, and more importantly, excellent aerosol characteristics as determined by inertial impaction studies. Confocal microscopy revealed that the polymeric NCs from such core-shell particles are capable not only to be taken up by Calu-3 (airway epithelial) cells that have been infected with Chlamydia pneumoniae, an intracellular pathogen, but are also internalized within chlamydial inclusions. Our results suggest that the proposed methodology can be used as a general platform for the delivery of polymeric NCs to the respiratory tract using the inexpensive pMDIs, and that such an approach may be used to target and deliver drugs to treat chlamydial-related infections.

Micro- and nanocarrier-mediated lung targeting

IMPORTANCE OF THE FIELD

Drug delivery to lungs appears to be an attractive proposition on account of the large surface area of the alveolar region; it provides tremendous opportunities to improve drug therapies both systemically and locally using new drug delivery systems. Administration of drugs directly to the lungs is the most appropriate route in the treatment of asthma and other pulmonary diseases such as tuberculosis, chronic obstructive pulmonary disease and lung cancer.

AREAS COVERED IN THIS REVIEW

This review focuses on the utilization of nano- and microcarriers such as microspheres, nanoparticles, liposomes, niosomes and dendrimers for targeted delivery of bioactive molecules to lungs.

WHAT THE READER WILL GAIN

This review sheds light on the current status of nano- and microcarrier-mediated lung targeting of bioactive compounds.

TAKE HOME MESSAGE

The literature review shows that carriers could supplement sustained drug delivery to the lungs, extended duration of action, reduced therapeutic dose, improved patient compliance, and reduced adverse effects of highly toxic drugs. There is still a need to identify more specific receptors that are present exclusively in the lungs. The identification of such receptors may also facilitate drug targeting to further specific parts of the lungs, such as bronchioles and alveoli.

Poly(vinyl benzoate) nanoparticles for molecular delivery: Studies on their preparation and in vitro properties

The preparation and properties of poly(vinyl benzoate) nanoparticle suspensions as molecular carriers are described for the first time. These nanoparticles can be formed by nanoprecipitation of commercial poly(vinyl benzoate) in water using Pluronic F68 as surfactant, to create spherical nanostructures measuring 200-250nm in diameter. These nanoparticles are stable in phosphate buffer and blood serum, and only slowly degrade in the presence of esterases. Pluronic F68 stabilizes the nanoparticle and also protects it from enzymatic degradation. Up to 1.6% by weight of a lipid-soluble molecule such as coumarin-6 can be introduced into the nanoparticle during nanoprecipitation, compared to a water-soluble compound (5(6)-carboxyfluorescein) which gave almost no loading. Kinetics experiments in phosphate buffer indicate that 78% of the coumarin-6 was encapsulated within the polymer matrix of the nanoparticle, and the residual 22% of coumarin-6 was surface-bound and quickly released. The nanoparticles are non-toxic in vitro towards human epithelial cells (IC(50)>1000μg/mL) and primary bovine aortic endothelial cells (IC(50)>500μg/mL), and non-bactericidal against a selection of representative test microbes (MIC >250μg/mL). These properties suggest that the poly(vinyl benzoate) nanoparticles may be suitable carriers for molecular delivery of lipophilic small molecules such as pharmaceutical and imaging agents.

Assessing nanotoxicity in cells in vitro

Nanomaterials are commonly defined as particles or fibers of less than 1 microm in diameter. For these reasons, they may be respirable in humans and have the potential, based upon their geometry, composition, size, and transport or durability in the body, to cause adverse effects on human health, especially if they are inhaled at high concentrations. Rodent inhalation models to predict the toxicity and pathogenicity of nanomaterials are prohibitive in terms of time and expense. For these reasons, a panel of in vitro assays is described below. These include cell culture assays for cytotoxicity (altered metabolism, decreased growth, lytic or apoptotic cell death), proliferation, genotoxicity, and altered gene expression. The choice of cell type for these assays may be dictated by the procedure or endpoint selected. Most of these assays have been standardized in our laboratory using pathogenic minerals (asbestos and silica) and non-pathogenic particles (fine titanium dioxide or glass beads) as negative controls. The results of these in vitro assays should predict whether testing of selected nanomaterials should be pursued in animal inhalation models that simulate physiologic exposure to inhaled nanomaterials. Conversely, intrathoracic or intrapleural injection of nanomaterials into rodents can be misleading because they bypass normal clearance mechanisms, and non-pathogenic fibers and particles can test positively in these assays.

Engineered nanoparticles in wastewater and wastewater sludge--evidence and impacts

Nanotechnology has widespread application in agricultural, environmental and industrial sectors ranging from fabrication of molecular assemblies to microbial array chips. Despite the booming application of nanotechnology, there have been serious implications which are coming into light in the recent years within different environmental compartments, namely air, water and soil and its likely impact on the human health. Health and environmental effects of common metals and materials are well-known, however, when the metals and materials take the form of nanoparticles--consequential hazards based on shape and size are yet to be explored. The nanoparticles released from different nanomaterials used in our household and industrial commodities find their way through waste disposal routes into the wastewater treatment facilities and end up in wastewater sludge. Further escape of these nanoparticles into the effluent will contaminate the aquatic and soil environment. Hence, an understanding of the presence, behavior and impact of these nanoparticles in wastewater and wastewater sludge is necessary and timely. Despite the lack of sufficient literature, the present review attempts to link various compartmentalization aspects of the nanoparticles, their physical properties and toxicity in wastewater and wastewater sludge through simile drawn from other environmental streams.

Nanomedicine in pulmonary delivery

The lung is an attractive target for drug delivery due to noninvasive administration via inhalation aerosols, avoidance of first-pass metabolism, direct delivery to the site of action for the treatment of respiratory diseases, and the availability of a huge surface area for local drug action and systemic absorption of drug. Colloidal carriers (ie, nanocarrier systems) in pulmonary drug delivery offer many advantages such as the potential to achieve relatively uniform distribution of drug dose among the alveoli, achievement of improved solubility of the drug from its own aqueous solubility, a sustained drug release which consequently reduces dosing frequency, improves patient compliance, decreases incidence of side effects, and the potential of drug internalization by cells. This review focuses on the current status and explores the potential of colloidal carriers (ie, nanocarrier systems) in pulmonary drug delivery with special attention to their pharmaceutical aspects. Manufacturing processes, in vitro/in vivo evaluation methods, and regulatory/toxicity issues of nanomedicines in pulmonary delivery are also discussed.