Fabrication of porous scaffolds with decellularized cartilage matrix for tissue engineering application

Evaluation of Articular Cartilage Regeneration Properties of Decellularized Cartilage Powder/Modified Hyaluronic Acid Hydrogel Scaffolds

The articular cartilage has poor intrinsic healing potential, hence, imposing a great challenge for articular cartilage regeneration in osteoarthritis. Tissue regeneration by scaffolds and bioactive materials has provided a healing potential for degenerated cartilage. In this study, decellularized cartilage powder (DCP) and hyaluronic acid hydrogel modified by aldehyde groups and methacrylate (AHAMA) were fabricated and evaluated in vitro for efficacy in articular cartilage regeneration. In vitro tests such as cell proliferation, cell viability, and cell migration showed that DCP/AHAMA has negligible cytotoxic effects. Furthermore, it could provide an enhanced microenvironment for infrapatellar fat pad stem cells (IFPSCs). Mechanical property tests of DCP/AHAMA showed suitable adhesive and compressive strength. IFPSCs under three-dimensional (3D) culture in DCP/AMAHA were used to assess their ability to proliferate and differentiate into chondrocytes using normal and chondroinductive media. Results exhibited increased gene expression of COL2 and ACN and decreased COL1 expression. DCP/AHAMA provides a microenvironment that recapitulates the biomechanical properties of the native cartilage, promotes chondrogenic differentiation, blocks hypertrophy, and demonstrates applicability for cartilage tissue engineering and the potential for clinical biomedical applications.

Chondrogenesis of mesenchymal stromal cells on the 3D printed polycaprolactone/fibrin/decellular cartilage matrix hybrid scaffolds in the presence of piascledine

Nowadays, cartilage tissue engineering (CTE) is considered important due to lack of repair of cartilaginous lesions and the absence of appropriate methods for treatment. In this study, polycaprolactone (PCL) scaffolds were fabricated by three-dimensional (3D) printing and were then coated with fibrin (F) and acellular solubilized extracellular matrix (ECM). After extracting adipose-derived stem cells (ADSCs), 3D-printed scaffolds were characterized and compared to hydrogel groups. After inducing the chondrogenic differentiation in the presence of Piascledine and comparing it with TGF-β3 for 28 days, the expression of genes involved in chondrogenesis (AGG, COLII) and the expression of the hypertrophic gene (COLX) were examined by real-time PCR. The expression of proteins COLII and COLX was also determined by immunohistochemistry. Glycosaminoglycan was measured by toluidine blue staining. 3D-printed scaffolds clearly improved cell proliferation, viability, water absorption and compressive strength compared to the hydrogel groups. Moreover, the use of compounds such as ECM and Piascledine in the process of ADSCs chondrogenesis induction increased cartilage-specific markers and decreased the hypertrophic marker compared to TGF-β3. In Piascledine groups, the expression of COLL II protein, COLL II and Aggrecan genes, and the amount of glycosaminoglycan showed a significant increase in the PCL/F/ECM compared to the PCL and PCL/F groups.

Fabrication and optimization of multilayered composite scaffold made of sulfated alginate-based nanofiber/decellularized Wharton's jelly ECM for tympanic membrane tissue engineering

In this study, we fabricated a novel multilayer polyvinyl alcohol (PVA)/alginate sulfate (ALG-S) nanofiber/decellularized Wharton's Jelly ECM (d-ECM) composite for tympanic membrane perforations (TMPs) tissue engineering (TE). Initially, electrospun PVA/ALG-S scaffolds with different blend ratios were fabricated. The influence of ALG-S ratio on surface morphology, mechanical, physical and biological properties of the nanofibers was studied. Secondly, 3-layer composites were developed as a combination of PVA/ALG-S nanofibers and d-ECM to take synergic advantages of electrospun mats and d-ECM. As part of the evaluation of the effects of d-ECM incorporation, the composite's mechanical properties, in vitro degradation, swelling ratio, and biological activities were assessed. The MTT assay showed that PVA/ALG-S nanofibers with 50:50 ratio provided a more desirable environment to support cell growth. A composite containing 25 mg/cm2 d-ECM was determined as the optimal composite through MTT assay, and this composite was used for animal studies inducing TMP regeneration. According to the in vivo studies, the optimal composite not only stimulated the healing of TMPs but also shortened the healing period. These results suggest that a multilayer nanofiber/hydrogel composite could be a potential platform for regenerating TMPs.

Application of chitosan with different molecular weights in cartilage tissue engineering

Cartilage tissue engineering involves the invention of novel implantable cartilage replacement materials to help heal cartilage injuries that do not heal themselves, aiming to overcome the shortcomings of current clinical cartilage treatments. Chitosan has been widely used in cartilage tissue engineering because of its similar structure to glycine aminoglycan, which is widely distributed in connective tissues. The molecular weight, as an important structural parameter of chitosan, affects not only the method of chitosan composite scaffold preparation but also the effect on cartilage tissue healing. Thus, this review identifies methods for the preparation of chitosan composite scaffolds with low, medium and high molecular weights, as well as a range of chitosan molecular weights appropriate for cartilage tissue repair, by summarizing the application of different molecular weights of chitosan in cartilage repair in recent years.

A hybrid cartilage extracellular matrix-based hydrogel/poly (ε-caprolactone) scaffold incorporated with Kartogenin for cartilage tissue engineering

Despite extensive studies, hydrogels are unable to meet the mechanical and biological requirements for successful outcomes in cartilage tissue engineering. In the present study, beta cyclodextrin (β-CD)-modified alginate/cartilage extracellular matrix (ECM)-based interpenetrating polymer network (IPN) hydrogel was developed for sustained release of Kartogenin (KGN). Furthermore, the hydrogel was incorporated within a 3D-printed poly (ε-caprolactone) (PCL)/starch microfiber network in order to reinforce the construct for cartilage tissue engineering. All the synthesized compounds were characterized by H¹-NMR spectroscopy. The hydrogel/microfiber composite with a microfiber strand size and strand spacing of 300 μm and 2 mm, respectively showed a compressive modulus of 17.2 MPa, resembling the properties of the native cartilage tissue. Considering water uptake capacity, degradation rate, mechanical property, cell cytotoxicity and glycosaminoglycan secretions, β-CD-modified hydrogel reinforced with printed PCL/starch microfibers with controlled release of KGN may be considered as a promising candidate for using in articular cartilage defects.

Advancements and Utilizations of Scaffolds in Tissue Engineering and Drug Delivery

The drug development process requires a thorough understanding of the scaffold and its three-dimensional structure. Scaffolding is a technique for tissue engineering and the formation of contemporary functioning tissues. Tissue engineering is sometimes referred to as regenerative medicine. They also ensure that drugs are delivered with precision. Information regarding scaffolding techniques, scaffolding kinds, and other relevant facts, such as 3D nanostructuring, are discussed in depth in this literature. They are specific and demonstrate localized action for a specific reason. Scaffold's acquisition nature and flexibility make it a new drug delivery technology with good availability and structural parameter management.

Cartilage biomechanics: From the basic facts to the challenges of tissue engineering

Articular cartilage (AC) is the thin tissue that covers the long bone ends in the joints and that ensures the transmission of forces between adjacent bones while allowing nearly frictionless movements between them. AC repair is a technologic and scientific challenge that has been addressed with numerous approaches. A major deadlock is the capacity to take in account its complex mechanical properties in repair strategies. In this review, we first describe the major mechanical behaviors of AC for the non-specialists. Then, we show how researchers have progressively identified specific mechanical parameters using mathematical models. There are still gaps in our understanding of some of the observations concerning AC biomechanical properties, particularly the differences in extracellular matrix stiffness measured at the microscale and at the millimetric scale. Nevertheless, for bioengineering applications, AC repair strategies must take into account what are commonly considered the main mechanical features of cartilage: its ability to withstand high stresses through three main behaviors (elasticity, poroelasticity and swelling). Finally, we emphasize that future studies need to investigate AC mechanical properties at different scales, particularly the gradient of mechanical properties around cells and across the cartilage depth, and the differences in mechanical properties at different scales. This multi-scale approach could greatly enhance the success of AC restorative approaches.

Preparation and Use of Decellularized Extracellular Matrix for Tissue Engineering

The multidisciplinary fields of tissue engineering and regenerative medicine have the potential to revolutionize the practise of medicine through the abilities to repair, regenerate, or replace tissues and organs with functional engineered constructs. To this end, tissue engineering combines scaffolding materials with cells and biologically active molecules into constructs with the appropriate structures and properties for tissue/organ regeneration, where scaffolding materials and biomolecules are the keys to mimic the native extracellular matrix (ECM). For this, one emerging way is to decellularize the native ECM into the materials suitable for, directly or in combination with other materials, creating functional constructs. Over the past decade, decellularized ECM (or dECM) has greatly facilitated the advance of tissue engineering and regenerative medicine, while being challenged in many ways. This article reviews the recent development of dECM for tissue engineering and regenerative medicine, with a focus on the preparation of dECM along with its influence on cell culture, the modification of dECM for use as a scaffolding material, and the novel techniques and emerging trends in processing dECM into functional constructs. We highlight the success of dECM and constructs in the in vitro, in vivo, and clinical applications and further identify the key issues and challenges involved, along with a discussion of future research directions.

Preparation and Characterization of Photocurable Composite Extracellular Matrix-Methacrylated Hyaluronic Acid Bioink

Limited number of bioink that fulfill the physicochemical requirements of printing and provide a desirable environment for encapsulated cells is a major challenge in three-dimensional (3D) bioprinting. Thus, we developed...

Biomechanics of Additively Manufactured Metallic Scaffolds-A Review

This review paper is related to the biomechanics of additively manufactured (AM) metallic scaffolds, in particular titanium alloy Ti6Al4V scaffolds. This is because Ti6Al4V has been identified as an ideal candidate for AM metallic scaffolds. The factors that affect the scaffold technology are the design, the material used to build the scaffold, and the fabrication process. This review paper includes thus a discussion on the design of Ti6A4V scaffolds in relation to how their behavior is affected by their cell shapes and porosities. This is followed by a discussion on the post treatment and mechanical characterization including in-vitro and in-vivo biomechanical studies. A review and discussion are also presented on the ongoing efforts to develop predictive tools to derive the relationships between structure, processing, properties and performance of powder-bed additive manufacturing of metals. This is a challenge when developing process computational models because the problem involves multi-physics and is of multi-scale in nature. Advantages, limitations, and future trends in AM scaffolds are finally discussed. AM is considered at the forefront of Industry 4.0, the fourth industrial revolution. The market of scaffold technology will continue to boom because of the high demand for human tissue repair.

Decellularized spinal cord meninges extracellular matrix hydrogel that supports neurogenic differentiation and vascular structure formation

Decellularization of extracellular matrices offers an alternative source of regenerative biomaterials that preserve biochemical structure and matrix components of native tissues. In this study, decellularized bovine spinal cord meninges (dSCM)-derived extracellular matrix hydrogel (MeninGEL) is fabricated by employing a protocol that involves physical, chemical, and enzymatic processing of spinal meninges tissue and preserves the biochemical structure of meninges. The success of decellularization is characterized by measuring the contents of residual DNA, glycosaminoglycans, and hydroxyproline, while a proteomics analysis is applied to reveal the composition of MeninGEL. Frequency and temperature sweep rheometry show that dSCM forms self-supporting hydrogel at physiological temperature. The MeninGEL possesses excellent cytocompatibility. Moreover, it is evidenced with immuno/histochemistry and gene expression studies that the hydrogel induces growth-factor free differentiation of human mesenchymal stem cells into neural-lineage cells. Furthermore, MeninGEL instructs human umbilical vein endothelial cells to form vascular branching. With its innate bioactivity and low batch-to-batch variation property, the MeninGEL has the potential to be an off-the-shelf product in nerve tissue regeneration and restoration.

Alginate/cartilage extracellular matrix-based injectable interpenetrating polymer network hydrogel for cartilage tissue engineering

In the present study, alginate/cartilage extracellular matrix (ECM)-based injectable hydrogel was developed incorporated with silk fibroin nanofibers (SFN) for cartilage tissue engineering. The in situ forming hydrogels were composed of different ionic crosslinked alginate concentrations with 1% w/v enzymatically crosslinked phenolized cartilage ECM, resulting in an interpenetrating polymer network (IPN). The response surface methodology (RSM) approach was applied to optimize IPN hydrogel's mechanical properties by varying alginate and SFN concentrations. The results demonstrated that upon increasing the alginate concentration, the compression modulus improved. The SFN concentration was optimized to reach a desired mechanical stiffness. Accordingly, the concentrations of alginate and SFN to have an optimum compression modulus in the hydrogel were found to be 1.685 and 1.724% w/v, respectively. The gelation time was found to be about 10 s for all the samples. Scanning electron microscope (SEM) images showed homogeneous dispersion of the SFN in the hydrogel, mimicking the natural cartilage environment. Furthermore, water uptake capacity, degradation rate, cell cytotoxicity, and glycosaminoglycan and collagen II secretions were determined for the optimum hydrogel to support its potential as an injectable scaffold for articular cartilage defects.

Differentiation and proliferation of spermatogonial stem cells using a three-dimensional decellularized testicular scaffold: a new method to study the testicular microenvironment in vitro

PURPOSE

Successful in vitro transplantation of spermatogonial stem cells (SSCs) demands effective culture systems for SSCs proliferation and differentiation. Natural extracellular matrix (ECM) creates a microenvironment suitable for culture of stem cells. In the present study, we intended to assess the capability of the porous scaffold consisting of hyaluronic acid (HA), chitosan, and decellularized testicular matrix (DTM) as a proper niche for SSCs seeding.

METHODS

The testes of four NMRI mice were extracted for further detergent-based decellularization process. We isolated, cultured, and clarified neonate mouse SSC, and a three-dimensional scaffold was prepared for SSCs culture. The loaded SSCs and hydrogel-based scaffold were investigated by several studies including scanning electron microscopy (SEM), 4',6-diamidino-2-phenylindole (DAPI), 3-[4, 5-dimethyl (thiazol-2yl)-3,5diphenyl] tetrazolium bromide (MTT), Acridine orange, and Immunohistochemistry (IHC) staining.

RESULTS

The efficiency of decellularization process was confirmed by DAPI, hematoxylin and eosin (H&E), and Masson's Trichrome staining. Acridine orange also depicted SSCs proliferation and viability. SEM approved the preservation of ECM components and also showed complex, coiled, and tubular seminiferous tubules, with intact and condensed collagenous form of the tunica albuginea. MTT test also revealed the scaffold's non-toxicity. Expression of PLZF, TP1, and TEKT1 markers also verified the capacity of SSCs proliferation on a cogel scaffold.

CONCLUSION

In conclusion, cogel scaffold consisting of DTM, HA, and chitosan may provide the supporting layer for in vitro SSC differentiation and proliferation.

Host Response to Biomaterials for Cartilage Tissue Engineering: Key to Remodeling

Biomaterials play a core role in cartilage repair and regeneration. The success or failure of an implanted biomaterial is largely dependent on host response following implantation. Host response has been considered to be influenced by numerous factors, such as immune components of materials, cytokines and inflammatory agents induced by implants. Both synthetic and native materials involve immune components, which are also termed as immunogenicity. Generally, the innate and adaptive immune system will be activated and various cytokines and inflammatory agents will be consequently released after biomaterials implantation, and further triggers host response to biomaterials. This will guide the constructive remolding process of damaged tissue. Therefore, biomaterial immunogenicity should be given more attention. Further understanding the specific biological mechanisms of host response to biomaterials and the effects of the host-biomaterial interaction may be beneficial to promote cartilage repair and regeneration. In this review, we summarized the characteristics of the host response to implants and the immunomodulatory properties of varied biomaterial. We hope this review will provide scientists with inspiration in cartilage regeneration by controlling immune components of biomaterials and modulating the immune system.

Optimization of decellularized human placental macroporous scaffolds for spermatogonial stem cells homing

Decellularized scaffolds have been found to be excellent platforms for tissue engineering applications. The attempts are still being made to optimize a decellularization protocol with successful removal of the cells with minimal damages to extracellular matrix components. We examined twelve decellularization procedures using different concentrations of Sodium dodecyl sulfate and Triton X-100 (alone or in combination), and incubation time points of 15 or 30 min. Then, the potential of the decellularized scaffold as a three-dimensional substrate for colony formation capacity of mouse spermatogonial stem cells was determined. The morphological, degradation, biocompatibility, and swelling properties of the samples were fully characterized. The 0.5%/30 SDS/Triton showed optimal decellularization with minimal negative effects on ECM (P ≤ 0.05). The swelling ratios increased with the increase of SDS and Triton concentration and incubation time. Only 0.5%/15 and 30 SDS showed a significant decrease in the SSCs viability compared with other groups (P < 0.05). The SSCs colony formation was clearly observed under SEM and H&E stained slides. The cells infiltrated into the subcutaneously implanted scaffold at days 7 and 30 post-implantation with no sign of graft rejection. Our data suggest the %0.5/30 SDS/Triton as an excellent platform for tissue engineering and reproductive biology applications.

Fabrication of three dimensional bioactive Sr2+ substituted apatite scaffolds by gel-casting technique for hard tissue regeneration

This study aimed to fabricate three-dimensional (3D) bioactive Sr²⁺ -substituted apatite (Sr-HAP) scaffolds prepared by gel-casting with polymer sponge infiltration technique. 3D Sr-HAP scaffolds were prepared as engineering constructs with interconnected porous structure with a pore size of 200-600 μm ranging from a 10 × 10 × 6 mm size was designed. The characterization of X-ray diffraction, field emission scanning electron microscopy, and energy dispersion spectroscopy was utilized in order to evaluate the crystalline phase, structure, and morphology in the interconnected porous of the synthesized Sr-HAP scaffold. The bioactive and biocompatible of the resultant Sr-HAP scaffolds were analyzed by using simulated body fluid solution. Furthermore, the cytotoxicity and proliferation of MG-63 cell lines on the scaffolds were examined in 24 h culture. Furthermore, in vivo experiments demonstrated that the tibia bone defect with 4 mm diameter in rabbits was successfully healed by Sr-HAP porous scaffold after 45 days implantation. The histological images indicated the improved cell proliferation and new bone formation occurred in the porous scaffold treated group. The results indicated that the fabricated Sr-HAP scaffold is a promising capacity to infuse bone regeneration and promote in vivo tissue repair.

Fabrication and characterization of an injectable reinforced composite scaffold for cartilage tissue engineering: an in vitro study

There are limitations in current medications of articular cartilage injuries. Although injectable bioactive hydrogels are promising options, they have decreased biomechanical performance. Researchers should consider many factors when providing solutions to overcome these challenges. In this study, we created an injectable composite hydrogel from chitosan and human acellular cartilage extracellular matrix (ECM) particles. In order to enhance its mechanical properties, we reinforced this hydrogel with microporous microspheres composed of the same materials as the structural building blocks of the scaffold. Articular cartilage from human donors was decellularized by a combination of physical, chemical, and enzymatic methods. The decellularization efficiency was assessed by histological analysis and assessment of DNA content. We characterized the composite constructs in terms of storage modulus, gelation time, biocompatibility, and differentiation potential. The results showed that mechanical behavior increased with an increase in microsphere content. The sample that contained 10% microsphere had an enhanced storage modulus of up to 90 kPa. Biocompatibility and preliminary differentiation investigations revealed that this composite hydrogel might have potential benefits for cartilage tissue engineering.

Fish cartilage: A promising source of biomaterial for biological scaffold fabrication in cartilage tissue engineering

Here, engineered cartilage-like scaffold using an extracellular matrix (ECM) from sturgeon fish cartilage provided a chondroinductive environment to stimulate cartilaginous matrix synthesis in human adipose stem cells (hASCs). Three dimensional porous and degradable fish cartilage ECM-derived scaffold (FCS) was produced using a protocol containing chemical decellularization, enzymatic solubilization, freeze-drying and EDC-crosslinking treatments and the effect of different ECM concentrations (10, 20, 30, and 40 mg/ml) on prepared scaffolds was investigated through physical, mechanical and biological analysis. The histological and scanning electron microscopy analysis revealed the elimination of the cell fragments and a 3-D interconnected porous structure, respectively. Cell viability assay displayed no cytotoxic effects. The prepared porous constructs of fish cartilage ECM were seeded with hASCs for 21 days and compared to collagen (Col) and collagen-10% hyaluronic acid (Col-HA) scaffolds. Cell culture results evidenced that the fabricated scaffolds could provide a proper 3-D structure to support the adhesion, proliferation and chondrogenic differentiation of hASCs considering the synthesis of specific proteins of cartilage, collagen type II (Col II) and aggrecan (ACAN). Based on the results of the present study, it can be concluded that the porous scaffold derived from fish cartilage ECM possesses an excellent potential for cartilage tissue engineering.

Artificial testis: a testicular tissue extracellular matrix as a potential bio-ink for 3D printing

A summary of the study design showing the extraction of extracellular matrix of testicular tissue and the printing of hydrogel scaffolds and the interaction of testicular cells on three-dimensional scaffolds.

Advances and prospects in biomimetic multilayered scaffolds for articular cartilage regeneration

Due to the sophisticated hierarchical structure and limited reparability of articular cartilage (AC), the ideal regeneration of AC defects has been a major challenge in the field of regenerative medicine. As defects progress, they often extend from the cartilage layer to the subchondral bone and ultimately lead to osteoarthritis. Tissue engineering techniques bring new hope for AC regeneration. To meet the regenerative requirements of the heterogeneous and layered structure of native AC tissue, a substantial number of multilayered biomimetic scaffolds have been studied. Ideal multilayered scaffolds should generate zone-specific functional tissue similar to native AC tissue. This review focuses on the current status of multilayered scaffolds developed for AC defect repair, including design strategies based on the degree of defect severity and the zone-specific characteristics of AC tissue, the selection and composition of biomaterials, and techniques for design and manufacturing. The challenges and future perspectives of biomimetic multilayered scaffold strategies for AC regeneration are also discussed.

Induced cell migration based on a bioactive hydrogel sheet combined with a perfused microfluidic system

Endothelial cell migration is a crucial step in the process of new blood vessel formation-a necessary process to maintain cell viability inside thick tissue constructs. Here, we report a new method for maintaining cell viability and inducing cell migration using a perfused microfluidic platform based on collagen gel and a gradient hydrogel sheet. Due to the helpful role of the extracellular matrix components in cell viability, we developed a hydrogel sheet from decellularized tissue (DT) of the bovine heart and chitosan (CS). The results showed that hydrogel sheets with an optimum weight ratio of CS/DT = 2 possess a porosity of around 75%, a mechanical strength of 23 kPa, and display cell viability up to 78%. Then, we immobilized a radial gradient of vascular endothelial growth factor (VEGF) on the hydrogel sheet to promote human umbilical vein endothelial cell migration. Finally, we incorporated the whole system as an entirety on the top of the microfluidic platform and studied cell migration through the hydrogel sheet in the presence of soluble and immobilized VEGF. The results demonstrated that immobilized VEGF stimulated cell migration in the hydrogel sheet at all depths compared with soluble VEGF. The results also showed that applying a VEGF gradient in both soluble and immobilized states had a significant effect on cell migration at limited depths (<100 μm). The main finding of this study is a significant improvement in cell migration using an in vivo imitating, cost-efficient and highly reproducible platform, which may open up a new perspective for tissue engineering applications.

Bioengineered three-dimensional physical constructs from quince seed mucilage for human adipose-derived mesenchymal stem cells

In this study, we aimed at fabricating a novel porous physical construct from quince seed mucilage for translational medicine applications. To achieve this goal, quince seed mucilage was extracted, molded, and freeze-dried. After being freeze-dried, the molded constructs were chemically crosslinked with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide/N-hydroxysuccinimide to maintain the mechanical integrity of the structure. The fabricated scaffolds were characterized in-depth by scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller analysis, thermogravimetric analysis, and dynamic mechanical analysis in addition to the swelling, liquid uptake, and porosity tests. The extraction yield of mucilage was calculated to be 6.28% ± 0.40% (n = 3). The swelling ratio of crosslinked quince seed mucilage–derived scaffolds was found to be 12,677.50% ± 388.82% (n = 3), whereas the porosity of crosslinked quince seed mucilage–derived scaffolds was 83.43% ± 2.84% (n = 3). The analyses confirmed the crosslinked quince seed mucilage–derived scaffolds to be possessed interconnected, highly porous structure. Afterward, human adipose-derived mesenchymal stem cells were seeded on the crosslinked quince seed mucilage–derived scaffolds, and the cell viability on the scaffolds was assessed with 3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay. The MTT results revealed the scaffolds not to be possessed any cytotoxic effect on seeded cells. Human adipose-derived mesenchymal stem cells adhesion and migration on the crosslinked quince seed mucilage–derived scaffolds were also evaluated histologically using hematoxylin and eosin staining in addition to scanning electron microscopy analysis. In conclusion, we believe that crosslinked quince seed mucilage–derived scaffolds have the potential to be an alternative to routinely used polysaccharides in regenerative medicine applications.

Fabrication of chitosan/agarose scaffolds containing extracellular matrix for tissue engineering applications

One of the most effective approaches for treatment of cartilage involves the use of porous three-dimensional scaffolds, which are useful for improving not only cellular adhesion but also mechanical properties of the treated tissues. In this study, we manufactured a composite scaffold with optimum properties to imitate nasal cartilage attributes. Cartilage extracellular matrix (ECM) was used in order to improve the cellular properties of the scaffolds; while, chitosan and agarose were main materials that are used to boost the mechanical and rheological properties of the scaffolds. Furthermore, we explored the effect of the various weight ratios of chitosan, agarose, and ECM on the mechanical and biomedical properties of the composite scaffolds using the Taguchi method. The resulting composites display a range of advantages, including good mechanical strength, porous morphology, partial crystallinity, high swelling ratio, controlled biodegradability rate, and rheological characteristics. Additionally, we performed the cytotoxicity tests to confirm the improvement of the structure and better cell attachments on the scaffolds. Our findings illustrate that the presence of the ECM in chitosan/agarose structure improves the biomedical characteristics of the final scaffold. In addition, we were able to control the mechanical properties and microstructure of the scaffolds by optimizing the polymers' concentration and their resulting interactions. These results present a novel scaffold with simultaneously enhanced mechanical and cellular attributes comparing to the scaffolds without ECM for nasal cartilage tissue engineering applications.

Recent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review

The promise of regenerative medicine and tissue engineering is founded on the ability to regenerate diseased or damaged tissues and organs into functional tissues and organs or the creation of new tissues and organs altogether. In theory, damaged and diseased tissues and organs can be regenerated or created using different configurations and combinations of extracellular matrix (ECM), cells, and inductive biomolecules. Regenerative medicine and tissue engineering can allow the improvement of patients' quality of life through availing novel treatment options. The coupling of regenerative medicine and tissue engineering with 3D printing, big data, and computational algorithms is revolutionizing the treatment of patients in a huge way. 3D bioprinting allows the proper placement of cells and ECMs, allowing the recapitulation of native microenvironments of tissues and organs. 3D bioprinting utilizes different bioinks made up of different formulations of ECM/biomaterials, biomolecules, and even cells. The choice of the bioink used during 3D bioprinting is very important as properties such as printability, compatibility, and physical strength influence the final construct printed. The extracellular matrix (ECM) provides both physical and mechanical microenvironment needed by cells to survive and proliferate. Decellularized ECM bioink contains biochemical cues from the original native ECM and also the right proportions of ECM proteins. Different techniques and characterization methods are used to derive bioinks from several tissues and organs and to evaluate their quality. This review discusses the uses of decellularized ECM bioinks and argues that they represent the most biomimetic bioinks available. In addition, we briefly discuss some polymer-based bioinks utilized in 3D bioprinting.

Injectable PNIPAM/Hyaluronic acid hydrogels containing multipurpose modified particles for cartilage tissue engineering: Synthesis, characterization, drug release and cell culture study

Novel injectable thermosensitive PNIPAM/hyaluronic acid hydrogels containing various amounts of chitosan-g-acrylic acid coated PLGA (ACH-PLGA) micro/nanoparticles were synthesized and designed to facilitate the regeneration of cartilage tissue. The ACH-PLGA particles were used in the hydrogels to play a triple role: first, the allyl groups on the chitosan-g-acrylic acid shell act as crosslinkers for PNIPAM and improved the mechanical properties of the hydrogel to mimic the natural cartilage tissue. Second, PLGA core acts as a carrier for the controlled release of chondrogenic small molecule melatonin. Third, they could reduce the syneresis of the thermosensitive hydrogel during gelation. The optimum hydrogel with the minimum syneresis and the maximum compression modulus was chosen for further evaluations. This hydrogel showed a great integration with the natural cartilage during the adhesion test, and also, presented an interconnected porous structure in scanning electron microscopy images. Eventually, to evaluate the cytotoxicity, mesenchymal stem cells were encapsulated inside the hydrogel. MTT and Live/Dead assay showed that the hydrogel improved the cells growth and proliferation as compared to the tissue culture polystyrene. Histological study of glycosaminoglycan (GAG) showed that melatonin treatment has the ability to increase the GAG synthesis. Overall, due to the improved mechanical properties, low syneresis, the ability of sustained drug release and also high bioactivity, this injectable hydrogel is a promising material system for cartilage tissue engineering.

A testis-derived macroporous 3D scaffold as a platform for the generation of mouse testicular organoids

Extracellular matrix-derived scaffolds provide an efficient platform for the generation of organ-like structures.

Tissue-Engineered Grafts from Human Decellularized Extracellular Matrices: A Systematic Review and Future Perspectives

Tissue engineering and regenerative medicine involve many different artificial and biologic materials, frequently integrated in composite scaffolds, which can be repopulated with various cell types. One of the most promising scaffolds is decellularized allogeneic extracellular matrix (ECM) then recellularized by autologous or stem cells, in order to develop fully personalized clinical approaches. Decellularization protocols have to efficiently remove immunogenic cellular materials, maintaining the nonimmunogenic ECM, which is endowed with specific inductive/differentiating actions due to its architecture and bioactive factors. In the present paper, we review the available literature about the development of grafts from decellularized human tissues/organs. Human tissues may be obtained not only from surgery but also from cadavers, suggesting possible development of Human Tissue BioBanks from body donation programs. Many human tissues/organs have been decellularized for tissue engineering purposes, such as cartilage, bone, skeletal muscle, tendons, adipose tissue, heart, vessels, lung, dental pulp, intestine, liver, pancreas, kidney, gonads, uterus, childbirth products, cornea, and peripheral nerves. In vitro recellularizations have been reported with various cell types and procedures (seeding, injection, and perfusion). Conversely, studies about in vivo behaviour are poorly represented. Actually, the future challenge will be the development of human grafts to be implanted fully restored in all their structural/functional aspects.

Construction of scaffolds composed of acellular cardiac extracellular matrix for myocardial tissue engineering

High rates of mortality and morbidity stemming from cardiovascular diseases unveil extreme limitations in current therapies despite enormous advances in medical and pharmaceutical sciences. Following myocardial infarction (MI), parts of myocardium undergo irreversible remodeling and is substituted by a scar tissue which eventually leads to heart failure (HF). To address this issue, cardiac patches have been utilized to initiate myocardial regeneration. In this study, a porous cardiac patch is fabricated using a mixture of decellularized myocardium extracellular matrix (ECM) and chitosan (CS). Results of rheological measurements, SEM, biodegradation test, and MTT assay showed that the scaffold composed of 3.5% (w/w) CS and 0.5% ECM has the best potential in providing cardiac progenitor cells (CPCs) with a suitable microenvironmental condition for both attachment and growth. This study demonstrates that the fabricated scaffold is capable of transmitting both mechanical and chemical cues that is native to myocardial tissue and supports efficient growth of the CPCs.