FRET-enabled biological characterization of polymeric micelles

Block copolymer micelles as ocular drug delivery systems

Block copolymer micelles, formed by the self-assembly of amphiphilic polymers, address formulation challenges, such as poor drug solubility and permeability. These micelles offer advantages including a smaller size, easier preparation, sterilization, and superior solubilization, compared with other nanocarriers. Preclinical studies have shown promising results, advancing them toward clinical trials. Their mucoadhesive properties enhance and prolong contact with the ocular surface, and their small size allows deeper penetration through tissues, such as the cornea. Additionally, copolymeric micelles improve the solubility and stability of hydrophobic drugs, sustain drug release, and allow for surface modifications to enhance biocompatibility. Despite these benefits, long-term stability remains a challenge. In this review, we highlight the preclinical performance, structural frameworks, preparation techniques, physicochemical properties, current developments, and prospects of block copolymer micelles as ocular drug delivery systems.

To see or not to see: In vivo nanocarrier detection methods in the brain and their challenges

Nanoparticles have a great potential to significantly improve the delivery of therapeutics to the brain and may also be equipped with properties to investigate brain function. The brain, being a highly complex organ shielded by selective barriers, requires its own specialized detection system. However, a significant hurdle to achieve these goals is still the identification of individual nanoparticles within the brain with sufficient cellular, subcellular, and temporal resolution. This review aims to provide a comprehensive summary of the current knowledge on detection systems for tracking nanoparticles across the blood-brain barrier and within the brain. We discuss commonly employed in vivo and ex vivo nanoparticle identification and quantification methods, as well as various imaging modalities able to detect nanoparticles in the brain. Advantages and weaknesses of these modalities as well as the biological factors that must be considered when interpreting results obtained through nanotechnologies are summarized. Finally, we critically evaluate the prevailing limitations of existing technologies and explore potential solutions.

Visualization and correlation of drug release of risperidone/clozapine microspheres in vitro and in vivo based on FRET mechanism

This study addresses the challenging task of quantitatively investigating drug release from PLGA microspheres after in vivo administration. The objective is to employ Förster resonance energy transfer (FRET) to visualize drug-encapsulated microspheres in both in vitro and in vivo settings. The primary goal is to establish a quantitative correlation between FRET fluorescence changes and microsphere drug release. The study selects drugs with diverse structures and lipid solubility to explore release mechanisms, using PLGA as the matrix material. Clozapine and risperidone serve as model drugs. FRET molecules, Cy5 and Cy5.5, along with Cy7 derivatives, create FRET donor-acceptor pairs. In vitro results show that FRET fluorescence changes align closely with microsphere drug release, particularly for the Cy5.5-Cy7 pair. In vivo experiments involve subcutaneous administration of microspheres to rats, tracking FRET fluorescence changes while collecting blood samples. Pharmacokinetic studies on clozapine and risperidone reveal in vivo absorption fractions using the Loo-Riegelman method. Correlating FRET and in vivo absorption data establishes an in vitro-in vivo relationship (IVIVR). The study demonstrates that FRET-based fluorescence changes quantitatively link to microsphere drug release, offering an innovative method for visualizing and monitoring release in both in vitro and in vivo settings, potentially advancing clinical applications of such formulations.

Applications and Potentials of a Silk Fibroin Nanoparticle Delivery System in Animal Husbandry

Silk fibroin (SF), a unique natural polymeric fibrous protein extracted from Bombyx mori cocoons, accounts for approximately 75% of the total mass of silk. It has great application prospects due to its outstanding biocompatibility, biodegradability, low immunogenicity, and mechanical stability. Additionally, it is non-toxic and environmentally friendly. Nanoparticle delivery systems constructed with SF can improve the bioavailability of the carriers, increase the loading rates, control the release behavior of the deliverables, and enhance their action efficiencies. Animal husbandry is an integral part of agriculture and plays a vital role in the development of the rural economy. However, the pillar industry experiences a lot of difficulties, like drug abuse while treating major animal diseases, and serious environmental pollution, restricting sustainable development. Interestingly, the limited use cases of silk fibroin nanoparticle (SF NP) delivery systems in animal husbandry, such as veterinary vaccines and feed additives, have shown great promise. This paper first reviews the SF NP delivery system with regard to its advantages, disadvantages, and applications. Moreover, we describe the application status and developmental prospects of SF NP delivery systems to provide theoretical references for further development in livestock production and promote the high-quality and healthy development of animal husbandry.

Biohybrid Nanoparticle-Based In Situ Monitoring of In Vivo Drug Delivery

Nanomaterials have gained huge attention worldwide owing to their unique physicochemical characteristics which enable their applications in the field of biomedicine and drug delivery systems. Although nanodrug delivery systems (NDDSs) have better target specificity and bioavailability than traditional drug delivery systems, their behavior and clearance mechanisms in living subjects remain unclear. In this regard, the importance of bioimaging methods has come to the forefront for investigating the biodistribution of nanocarriers and discovering drug release mechanisms in vivo. In this review, we introduce several examples of biohybrid nanoparticles and their clinical applications, focusing on their advantages and limitations. The various bioimaging methods for monitoring the fate of nanodrugs in biological systems and the future perspectives of NDDSs have also been discussed.

Procedurally Targeted Delivery of Antitumor Drugs Using FAPα-Responsive TPGS Dimer-Based Flower-like Polymeric Micelles

To overcome the intestinal epithelium barrier and achieve a better antitumor effect, the procedurally targeting flower-like nanomicelles for oral delivery of antitumor drugs were designed based on FAPα-responsive TPGS1000 dimer (TPGS-Gly-Pro-TPGS) and L-carnitine linked poly(2-ethyl-2-oxazoline)-b-poly(D, l-lactide) (Car-PEOz-b-PLA). As expected, compared with unmodified polymeric micelles (TT-PMs) composed of TPGS-Gly-Pro-TPGS, L-carnitine conjugated polymeric micelles (CTT-PMs) formed from both TPGS-Gly-Pro-TPGS and Car-PEOz-b-PLA with favorable stability in simulated gastrointestinal fluid and FAPα-dependent release capability exhibited remarkably enhanced cellular uptake and transmembrane transport through OCTN2 mediation confirmed by fluorescence immunoassay, which was intuitively evidenced by stronger fluorescence within epithelial cells, and the basal side of small intestinal epithelium of mice being given intragastric administration of DiI-labeled micelles. The transport of CTT-PMs across the intestinal epithelium in an intact form was mediated by clathrin along the intracellular transport pathway of endosome-lysosome-ER-Golgi apparatus. Furthermore, both the increased uptake by FAPα-positive U87MG cells and unchangeable uptake by FAPα-negative C6 cells for coumarin-6 (C-6)/CTT-PMs compared with C-6/TT-PMs evidenced the targeting ability of CTT-PMs to FAPα-positive tumor cells. Both OCTN2-mediation and FAPα-responsiveness were beneficial for polymeric micelles to improve the delivery and therapeutic efficiency of antitumor agents, which was further supported by the remarkable enhancement in in vivo antitumor efficacy via promoting apoptosis of tumor cells for paclitaxel (PTX)-loaded CTT-PMs (PTX/CTT-PMs) with low toxicity compared with PTX/TT-PMs. Our findings offered an alternative design strategy for procedurally targeted delivery of chemotherapeutics by an oral route.

FRET-based analysis on the structural stability of polymeric micelles: Another key attribute beyond PEG coverage and particle size affecting the blood clearance

Various attributes of micelles, such as PEG density and particle size, are considered to be related to blood clearance. The structural stability of micelles is another key attribute that will affect the in vivo fate. This study employed fluorescence resonance energy transfer (FRET) analysis to guide the preparation of polymeric micelles with different structural stability. Micelles prepared using copolymers with longer hydrophobic blocks showed higher structural stability; emulsification was a better method than nanoprecipitation to prepare stable micelles. The fast chain exchange kinetics and the high-water content of micellar cores explained the low structural stability of those micelles. Moreover, this study highlighted the importance of structural stability that affected blood clearance in concert with PEG length and particle size. One-third of the small and stable micelles were detected in the blood 24 h after injection. While unstable micelles would be cleared from the circulation within 4 h. Notably, there would be a threshold of structural stability. Micelles with structural stability below this threshold were quickly cleared even if they possessed a longer PEG length and a smaller size. In contrast, higher structural stability allowed polymeric micelles to maintain higher integrity in vivo and enhance tumor accumulation and anti-tumor efficacy. In conclusion, this study systematically analyzed the importance of the structural stability of micelles on the in vivo fate.

PEGylated and functionalized polylactide-based nanocapsules: An overview

Polymeric nanocapsules (NC) are versatile mixed vesicular nanocarriers, generally containing a lipid core with a polymeric wall. They have been first developed over four decades ago with outstanding applicability in the cosmetic and pharmaceutical fields. Biodegradable polyesters are frequently used in nanocapsule preparation and among them, polylactic acid (PLA) derivatives and copolymers, such as PLGA and amphiphilic block copolymers, are widely used and considered safe for different administration routes. PLA functionalization strategies have been developed to obtain more versatile polymers and to allow the conjugation with bioactive ligands for cell-targeted NC. This review intends to provide steps in the evolution of NC since its first report and the recent literature on PLA-based NC applications. PLA-based polymer synthesis and surface modifications are included, as well as the use of NC as a novel tool for combined treatment, diagnostics, and imaging in one delivery system. Furthermore, the use of NC to carry therapeutic and/or imaging agents for different diseases, mainly cancer, inflammation, and infections is presented and reviewed. Constraints that impair translation to the clinic are discussed to provide safe and reproducible PLA-based nanocapsules on the market. We reviewed the entire period in the literature where the term "nanocapsules" appears for the first time until the present day, selecting original scientific publications and the most relevant patent literature related to PLA-based NC. We presented to readers a historical overview of these Sui generis nanostructures.

Influence of Hydrophobic Side-Chain Length in Amphiphilic Gradient Copoly(2-oxazoline)s on the Therapeutics Loading, Stability, Cellular Uptake and Pharmacokinetics of Nano-Formulation with Curcumin

Due to the simple one-step preparation method and a promising application in biomedical research, amphiphilic gradient copoly(2-oxazoline)s are gaining more and more interest compared to their analogous block copolymers. In this work, the curcumin solubilization ability was tested for a series of amphiphilic gradient copoly(2-oxazoline)s with different lengths of hydrophobic side-chains, consisting of 2-ethyl-2-oxazoline as a hydrophilic monomer and 2-(4-alkyloxyphenyl)-2-oxazoline as a hydrophobic monomer. It is shown that the length of the hydrophobic side-chain in the copolymers plays a crucial role in the loading of curcumin onto the self-assembled nanoparticles. The kinetic stability of self-assembled nanoparticles studied using FRET shows a link between their integrity and cellular uptake in human glioblastoma cells. The present study demonstrates how minor changes in the molecular structure of gradient copoly(2-oxazoline)s can lead to significant differences in the loading, stability, cytotoxicity, cellular uptake, and pharmacokinetics of nano-formulations containing curcumin. The obtained results on the behavior of the complex of gradient copoly(2-oxazoline)s and curcumin may contribute to the development of effective next-generation polymeric nanostructures for biomedical applications.

Fluorescent Multifunctional Organic Nanoparticles for Drug Delivery and Bioimaging: A Tutorial Review

Fluorescent organic nanoparticles (FONs) are a large family of nanostructures constituted by organic components that emit light in different spectral regions upon excitation, due to the presence of organic fluorophores. FONs are of great interest for numerous biological and medical applications, due to their high tunability in terms of composition, morphology, surface functionalization, and optical properties. Multifunctional FONs combine several functionalities in a single nanostructure (emission of light, carriers for drug-delivery, functionalization with targeting ligands, etc.), opening the possibility of using the same nanoparticle for diagnosis and therapy. The preparation, characterization, and application of these multifunctional FONs require a multidisciplinary approach. In this review, we present FONs following a tutorial approach, with the aim of providing a general overview of the different aspects of the design, preparation, and characterization of FONs. The review encompasses the most common FONs developed to date, the description of the most important features of fluorophores that determine the optical properties of FONs, an overview of the preparation methods and of the optical characterization techniques, and the description of the theoretical approaches that are currently adopted for modeling FONs. The last part of the review is devoted to a non-exhaustive selection of some recent biomedical applications of FONs.

The in vivo fate of polymeric micelles

This review aims to provide a systemic analysis of the in vivo, as well as subcellular, fate of polymeric micelles (PMs), starting from the entry of PMs into the body. Few PMs are able to cross the biological barriers intact and reach the circulation. In the blood, PMs demonstrate fairly good stability mainly owing to formation of protein corona despite controversial results reported by different groups. Although the exterior hydrophilic shells render PMs "long-circulating", the biodistribution of PMs into the mononuclear phagocyte systems (MPS) is dominant as compared with non-MPS organs and tissues. Evidence emerges to support that the copolymer poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) is first broken down into pieces of PEG and PLA and then remnants to be eliminated from the body finally. At the cellular level, PMs tend to be internalized via endocytosis due to their particulate nature and disassembled and degraded within the cell. Recent findings on the effect of particle size, surface characteristics and shape are also reviewed. It is envisaged that unraveling the in vivo and subcellular fate sheds light on the performing mechanisms and gears up the clinical translation of PMs.

FRET as the tool for in vivo nanomedicine tracking

Advanced drug delivery system utilizing a nanocarrier is the major application of nanotechnology on pharmacotherapeutics. However, despite the promising benefits and a leading trend in pharmaceutical research, nanomedicine development suffers from a poor clinical translation problem as only a handful of nanomedicine products reach the market yearly. The conventional pharmacokinetic study generally focuses only on monitoring the level of a free drug but ignores the nanocarrier's role in pharmacokinetics. One hurdle is that it is difficult to directly track intact nanocarriers in vivo to explore their pharmacokinetics. Although several imaging techniques such as radiolabeling, nuclear imaging, fluorescence imaging, etc., have been developed over the past few years, currently, one method that can successfully track the intact nanocarriers in vivo directly is by Förster resonance energy transfer (FRET). This review summarizes the application of FRET as the in vivo nanoparticle tracker for studying the in vivo pharmacokinetics of the organic nanocarriers and gives elaborative details on the techniques utilized.

Fluorescence Resonance Energy Transfer Measurements in Polymer Science: A Review

Fluorescence resonance energy transfer (FRET) is a non-invasive characterization method for studying molecular structures and dynamics, providing high spatial resolution at nanometer scale. Over the past decades, FRET-based measurements are developed and widely implemented in synthetic polymer systems for understanding and detecting a variety of nanoscale phenomena, enabling significant advances in polymer science. In this review, the basic principles of fluorescence and FRET are briefly discussed. Several representative research areas are highlighted, where FRET spectroscopy and imaging can be employed to reveal polymer morphology and kinetics. These examples include understanding polymer micelle formation and stability, detecting guest molecule release from polymer host, characterizing supramolecular assembly, imaging composite interfaces, and determining polymer chain conformations and their diffusion kinetics. Finally, a perspective on the opportunities of FRET-based measurements is provided for further allowing their greater contributions in this exciting area.

Chromophoric Dendrimer-Based Materials: An Overview of Holistic-Integrated Molecular Systems for Fluorescence Resonance Energy Transfer (FRET) Phenomenon

Dendrimers (from the Greek dendros → tree; meros → part) are macromolecules with well-defined three-dimensional and tree-like structures. Remarkably, this hyperbranched architecture is one of the most ubiquitous, prolific, and recognizable natural patterns observed in nature. The rational design and the synthesis of highly functionalized architectures have been motivated by the need to mimic synthetic and natural-light-induced energy processes. Dendrimers offer an attractive material scaffold to generate innovative, technological, and functional materials because they provide a high amount of peripherally functional groups and void nanoreservoirs. Therefore, dendrimers emerge as excellent candidates since they can play a highly relevant role as unimolecular reactors at the nanoscale, acting as versatile and sophisticated entities. In particular, they can play a key role in the properties of light-energy harvesting and non-radiative energy transfer, allowing them to function as a whole unit. Remarkably, it is possible to promote the occurrence of the FRET phenomenon to concentrate the absorbed energy in photoactive centers. Finally, we think an in-depth understanding of this mechanism allows for diverse and prolific technological applications, such as imaging, biomedical therapy, and the conversion and storage of light energy, among others.

FRET Ratiometric Nanoprobes for Nanoparticle Monitoring

Fluorescence labelling is often used for tracking nanoparticles, providing a convenient assay for monitoring nanoparticle drug delivery. However, it is difficult to be quantitative, as many factors affect the fluorescence intensity. Förster resonance energy transfer (FRET), taking advantage of the energy transfer from a donor fluorophore to an acceptor fluorophore, provides a distance ruler to probe NP drug delivery. This article provides a review of different FRET approaches for the ratiometric monitoring of the self-assembly and formation of nanoparticles, their in vivo fate, integrity and drug release. We anticipate that the fundamental understanding gained from these ratiometric studies will offer new insights into the design of new nanoparticles with improved and better-controlled properties.

Organic nanoparticle tracking during pharmacokinetic studies

To understand how nanoparticles (NPs) interact with biological barriers and to ensure they maintain their integrity over time, it is crucial to study their in vivo pharmacokinetic (PK) profiles. Many methods of tracking have been used to describe the in vivo fate of NPs and to evaluate their PKs and structural integrity. However, they do not deliver the same level of information and this may cause misinterpretations. Here, the authors review and discuss the different methods for in vivo tracking of organic NPs. Among them, Förster resonance energy transfer (FRET) presents great potential to track NPs' integrity. However, FRET still requires validated methods to extract and quantify NPs in biological fluids and tissues.

Fluorescent labeling of biocompatible block copolymers: synthetic strategies and applications in bioimaging

Among biocompatible materials, block copolymers (BCPs) possess several advantages due to the control of their chemistry and the possibility of combining various blocks with defined properties. Consequently, BCPs drew considerable attention as biocompatible materials in the fields of drug delivery, medicine and bioimaging. Fluorescent labeling of BCPs quickly appeared to be a method of choice to image and track these materials in order to better understand the nature of their interactions with biological media. However, incorporating fluorescent markers (FM) into BCPs can appear tricky; we thus intend to help chemists in this endeavor by reviewing recent advances made in the last 10 years. With the choice of the FM being of prior importance, we first reviewed their photophysical properties and functionalities for optimal labeling and imaging. In the second part the different chemical approaches that have been used in the literature to fluorescently label BCPs have been reviewed. We also report and discuss relevant applications of fluorescent BCPs in bioimaging.

Polymeric micelles in drug delivery: An insight of the techniques for their characterization and assessment in biorelevant conditions

Polymeric micelles, i.e. aggregation colloids formed in solution by self-assembling of amphiphilic polymers, represent an innovative tool to overcome several issues related to drug administration, from the low water-solubility to the poor drug permeability across biological barriers. With respect to other nanocarriers, polymeric micelles generally display smaller size, easier preparation and sterilization processes, and good solubilization properties, unfortunately associated with a lower stability in biological fluids and a more complicated characterization. Particularly challenging is the study of their interaction with the biological environment, essential to predict the real in vivo behavior after administration. In this review, after a general presentation on micelles features and properties, different characterization techniques are discussed, from the ones used for the determination of micelles basic characteristics (critical micellar concentration, size, surface charge, morphology) to the more complex approaches used to figure out micelles kinetic stability, drug release and behavior in the presence of biological substrates (fluids, cells and tissues). The techniques presented (such as dynamic light scattering, AFM, cryo-TEM, X-ray scattering, FRET, symmetrical flow field-flow fractionation (AF4) and density ultracentrifugation), each one with their own advantages and limitations, can be combined to achieve a deeper comprehension of polymeric micelles in vivo behavior. The set-up and validation of adequate methods for micelles description represent the essential starting point for their development and clinical success.

Dye-Loaded Nanoemulsions: Biomimetic Fluorescent Nanocarriers for Bioimaging and Nanomedicine

Lipid nanoemulsions (NEs), owing to their controllable size (20 to 500 nm), stability and biocompatibility, are now frequently used in various fields, such as food, cosmetics, pharmaceuticals, drug delivery, and even as nanoreactors for chemical synthesis. Moreover, being composed of components generally recognized as safe (GRAS), they can be considered as "green" nanoparticles that mimic closely lipoproteins and intracellular lipid droplets. Therefore, they attracted attention as carriers of drugs and fluorescent dyes for both bioimaging and studying the fate of nanoemulsions in cells and small animals. In this review, the composition of dye-loaded NEs, methods for their preparation, and emerging biological applications are described. The design of bright fluorescent NEs with high dye loading and minimal aggregation-caused quenching (ACQ) is focused on. Common issues including dye leakage and NEs stability are discussed, highlighting advanced techniques for their characterization, such as Förster resonance energy transfer (FRET) and fluorescence correlation spectroscopy (FCS). Attempts to functionalize NEs surface are also discussed. Thereafter, biological applications for bioimaging and single-particle tracking in cells and small animals as well as biomedical applications for photodynamic therapy are described. Finally, challenges and future perspectives of fluorescent NEs are discussed.

Albumin-based fluorescence resonance energy transfer nanoprobes for multileveled tumor tissue imaging and dye release imaging

Tumor tissue imaging and drug release imaging are both crucial for tumor imaging and image-guided drug delivery. It is urgent to develop a multileveled tumor imaging platform to realize the multiple imaging applications. In this work, we synthesized an albumin-based fluorescence resonance energy transfer (FRET) probe Cy5/7@HSA NPs containing two near-infrared cyanine dyes (CyBI5 and CyBI7) with high FRET efficiency (97 %). Excellent brightness and efficient FRET inside Cy5/7@HSA NPs enabled high-sensitive cell imaging and tumor imaging. This unique nanoprobe imaged 4T1 tumor-bearing mice with high sensitivity (TBR = 5.2) at 24 h post-injection and the dyes penetrated the tumor interior around 4 h post-injection. The release of dyes from nanoprobes was also tracked. This result shows the strong potential of this albumin-based FRET nanoprobe as multileveled tumor imaging platform for in vivo tumor imaging, drug delivery and image-guided surgery.

Multiscale Live Imaging Using Förster Resonance Energy Transfer (FRET) for Evaluating the Biological Behavior of Nanoparticles as Drug Carriers

To develop targeted drug delivery systems using nanoparticles for treating various diseases, the evaluation of nanoparticle behavior in biological environments is necessary. In the present study, the biological behavior of polymeric nanoparticles was directly traced in living mice and cells. The dissociation of nanoparticles was detected by Förster resonance energy transfer (FRET) imaging. DiR and DiD were encapsulated in the nanoparticles for near-infrared FRET imaging, and they were traced using in vivo FRET imaging and intravital FRET imaging at the whole-body and tissue scales, respectively. In vivo FRET imaging revealed that the nanoparticles dissociated over time following intravenous administration. Intravital FRET imaging revealed that the nanoparticles dissociated in the liver and blood vessels following intravenous administration. DiI and DiO were encapsulated in nanoparticles for FRET imaging using confocal microscopy, and they were traced using in vitro FRET imaging in HepG2 cells. In vitro FRET imaging revealed that the nanoparticles dissociated and released fluorescent dyes that distributed in the cell membrane. Finally, live imaging was performed using FRET at the whole-body, tissue, and cellular scales. This method is suitable for obtaining information regarding the biological kinetic properties of nanoparticles and their use in targeted drug delivery.

Dye-Loaded Quatsomes Exhibiting FRET as Nanoprobes for Bioimaging

Fluorescent organic nanoparticles (FONs) are emerging as an attractive alternative to the well-established fluorescent inorganic nanoparticles or small organic dyes. Their proper design allows one to obtain biocompatible probes with superior brightness and high photostability, although usually affected by low colloidal stability. Herein, we present a type of FONs with outstanding photophysical and physicochemical properties in-line with the stringent requirements for biomedical applications. These FONs are based on quatsome (QS) nanovesicles containing a pair of fluorescent carbocyanine molecules that give rise to Förster resonance energy transfer (FRET). Structural homogeneity, high brightness, photostability, and high FRET efficiency make these FONs a promising class of optical bioprobes. Loaded QSs have been used for in vitro bioimaging, demonstrating the nanovesicle membrane integrity after cell internalization, and the possibility to monitor the intracellular vesicle fate. Taken together, the proposed QSs loaded with a FRET pair constitute a promising platform for bioimaging and theranostics.

Investigation of the in vivo integrity of polymeric micelles via large Stokes shift fluorophore-based FRET

Polymeric micelles hold great potential for anticancer drug delivery. Sufficient integrity of polymeric micelles after intravenous injection is critical for successful drug delivery to solid tumors, but accurate measurement of the in vivo micellar integrity remains challenging. Methods based on Förster resonance energy transfer (FRET) to monitor the in vivo micellar integrity are frequently used. However, the self-quenching effect of these FRET fluorophores used has been improperly ignored and has caused inaccurate measurements. Herein, we report a FRET-based approach using the large Stokes shift (LSS) fluorophores NBD-X and MS735 as the donor and acceptor, respectively, to investigate the integrity of polyethylene glycol-block-poly(ε-caprolactone) (PEG-PCL) micelles. We established a mathematical formula for the integrity calculation, and an in vitro verification experiment showed that the formula results exactly matched the simulated results. Our results demonstrated that PEG-PCL micelles gradually dissociated in blood circulation, but approximately 60% of the micelles in plasma remained intact 72 h after intravenous (i.v.) injection. This LSS fluorophore-based FRET approach can be used to accurately monitor the integrity of nanoparticles, and this study demonstrates that most of PEG-PCL micelles maintain their aggregation state during blood circulation for anticancer drug delivery.

Crosslinking Induced Reassembly of Multiblock Polymers: Addressing the Dilemma of Stability and Responsivity

Physical or chemical crosslinking of polymeric micelles has emerged as a straightforward approach to overcome the intrinsic instability of assemblies. However, the crosslinking process may compromise the responsivity of nanosystems and result in inefficient release of payloads. To address this dilemma, a crosslinking induced reassembly (CIRA) strategy is reported here to simultaneously increase the kinetic and thermodynamic stability and redox-responsivity of polymeric micelles. It is found that the click crosslinking of a model multiblock polyurethane at the micellar interface induces microphase separation between the soft and hard segments. The aggregation of hard domains gathers liable disulfide linkages around the interlayer of micelles, which could facilitate the attack of reducing agents and act as an intelligent on-off switch for high stability and triggered release. As a result, the CIRA approach enables an enhanced tumor targeting, improved biodistribution and excellent therapeutic efficacy in vivo. This work provides a facile and versatile platform for controlled delivery applications.

Amphiphilic Block Copolymers: A Novel Substance for Bitter-Masking in Aqueous Solutions

It is a challenging task to suppress the bitterness of liquid preparations, especially for children. Bitter molecules are highly dispersible in liquids, leading to a strong and instant stimulation of the bitter receptors. At present, there is no effective way to correct this issue except for adding sweeteners, resulting in an unsatisfying taste. Based on the three-point contact theory, which is a universally accepted mechanism of bitterness formation, a new idea and application of amphiphilic block copolymers (ABCs) for bitterness suppression was proposed for the first time. We found that ABCs could widely inhibit the bitterness of four typical bitter substances. The mechanism is that ABCs self-assemble to form association colloids, which attract bitter components and reduce their distribution in the molecular form in solution. The bitter components were demonstrated to automatically embed in the spiral hydrophobic cavity of the hydrophobic chain of the ABCs, and their special interaction dispersed the positive electrostatic potential of bitter groups. The combination did not affect the pharmacokinetic parameters and pharmacodynamics of bitter drugs. These findings highlight the novel application of ABCs for the inhibition of bitterness and illuminate the underlying inhibition mechanisms.

Real time monitoring of peptide delivery in vitro using high payload pH responsive nanogels

A pH responsive pMAA nanogel that demonstrates high loading capacity and rapid intracellular delivery of hydrophilic peptides.

Towards more accurate bioimaging of drug nanocarriers: turning aggregation-caused quenching into a useful tool

One of the current challenges in the monitoring of drug nanocarriers lies in the difficulties in discriminating the carrier-bound signals from the bulk signals of probes. Environment-responsive probes that enable signal switching are making steps towards a solution to this problem. Aggregation-caused quenching (ACQ), a phenomenon generally regarded as unfavorable in bioimaging, has turned out to be a promising characteristic for achieving environment-responsiveness and eliminating free-probe interference. So-called ACQ probes emit fluorescence when dispersed molecularly within the carrier matrix but quench immediately and absolutely once they are released into the ambient aqueous environment upon the degradation of the nanocarriers. Therefore, the fluorescence observed represents integral nanocarriers. Based on this rationale, the in vivo fates of various nanocarriers have been explored using live imaging equipment, with very interesting findings revealing the role of the particles. The current applications are however restricted to nanocarriers with highly hydrophobic matrices (lipid or polyester nanoparticles) or with a hydrophobic core-hydrophilic shell structure (micelles). The ACQ-based bioimaging strategy is emerging as a promising tool to achieve more accurate bioimaging of drug nanocarriers. This review article provides an overview of the ACQ phenomenon and the rationale for and examples of applications, as well as the limitations of the ACQ-based strategy, with a focus on improving the accuracy of bioimaging of nanoparticles.

Application of Förster Resonance Energy Transfer (FRET) technique to elucidate intracellular and In Vivo biofate of nanomedicines

Extensive studies on nanomedicines have been conducted for drug delivery and disease diagnosis (especially for cancer therapy). However, the intracellular and in vivo biofate of nanomedicines, which is significantly associated with their clinical therapeutic effect, is poorly understood at present. This is because of the technical challenges to quantify the disassembly and behaviour of nanomedicines. As a fluorescence- and distance-based approach, the Förster Resonance Energy Transfer (FRET) technique is very successful to study the interaction of nanomedicines with biological systems. In this review, principles on how to select a FRET pair and construct FRET-based nanomedicines have been described first, followed by their application to study structural integrity, biodistribution, disassembly kinetics, and elimination of nanomedicines at intracellular and in vivo levels, especially with drug nanocarriers including polymeric micelles, polymeric nanoparticles, and lipid-based nanoparticles. FRET is a powerful tool to reveal changes and interaction of nanoparticles after delivery, which will be very useful to guide future developments of nanomedicine.

Hybrid drug nanocrystals

Nanocrystals show promise to deliver poorly water-soluble drugs to yield systemic exposure. However, our knowledge regarding the in vivo fate of nanocrystals is in its infancy, as nanocrystallization is simply viewed as an approach to enhance the dissolution of drug crystals. The dying crystal phenomenon inspired the development of hybrid nanocrystals by physically embedding fluorophores into the crystal lattice. This approach achieved concurrent therapy and bioimaging and is well-established to study pharmacokinetics and nanocrystal dissolution in vivo. Nanocrystals also offer the advantage of long-term durability in the body for interacting with biological tissues and cells. This review introduces the hybrid nanocrystal technique, including the theoretical concepts, preparation, and applications. We also discuss the latest development in self-discriminative hybrid nanocrystals utilizing environment-responsive probes. This review will stimulate further development and application of nanocrystal-based drug delivery systems for theranostic strategies.

Pentablock Copolymer Micelle Nanoadjuvants Enhance Cytosolic Delivery of Antigen and Improve Vaccine Efficacy while Inducing Low Inflammation

As the focus has shifted from traditional killed or live, attenuated vaccines toward subunit vaccines, improvements in vaccine safety have been confronted with low immunogenicity of protein antigens. This issue has been addressed by synthesizing and designing a wide variety of antigen carriers and adjuvants, such as Toll-like receptor agonists (e.g., MPLA, CpG). Studies have focused on optimizing adjuvants for improved cellular trafficking, cytosolic availability, and improved antigen presentation. In this work, we describe the design of novel amphiphilic pentablock copolymer (PBC) adjuvants that exhibit high biocompatibility and reversible pH- and temperature-sensitive micelle formation. We demonstrate improved humoral immunity in mice in response to single-dose immunization with PBC micelle adjuvants compared with soluble antigen alone. With the motive of exploring the mechanism of action of these PBC micelles, we studied intracellular trafficking of these PBC micelles with a model antigen and demonstrated that the PBC micelles associate with the antigen and enhance its cytosolic delivery to antigen-presenting cells. We posit that these PBC micelles operate via immune-enhancing mechanisms that are different from that of traditional Toll-like receptor activating adjuvants. The metabolic profile of antigen-presenting cells stimulated with traditional adjuvants and the PBC micelles also suggests distinct mechanisms of action. A key finding from this study is the low production of nitric oxide and reactive oxygen species by antigen-presenting cells when stimulated by PBC micelle adjuvants in sharp contrast to TLR adjuvants. Together, these studies provide a basis for rationally developing novel vaccine adjuvants that are safe, that induce low inflammation, and that can efficiently deliver antigen to the cytosol.

Quantifying Release from Lipid Nanocarriers by Fluorescence Correlation Spectroscopy

Understanding the release of drugs and contrast agents from nanocarriers is fundamental in the development of new effective nanomedicines. However, the commonly used method based on dialysis frequently fails to quantify the release of molecules poorly soluble in water, and it is not well-suited for in situ measurements in biological media. Here, we have developed a new methodology for quantifying the release of fluorescent molecules from lipid nanocarriers (LNCs) using fluorescence correlation spectroscopy (FCS). LNCs based on nanoemulsion droplets, encapsulating the hydrophobic Nile red derivative NR668 as a model cargo, were used. Our studies revealed that the standard deviation of fluorescence fluctuations in FCS measurements depends linearly on the dye loading in the nanocarriers, and it is insensitive to the presence of less-bright molecular emissive species in solution. In sharp contrast, classical FCS parameters, such as the number and the brightness of emissive species, are strongly influenced by the fluorescence of molecular species in solution. Therefore, we propose to use the standard deviation of fluorescence fluctuations for the quantitative analysis of dye release from nanocarriers, which is unaffected by the "parasite" fluorescence of the released dyes or the auto-fluorescence of the medium. Using this method, we found that LNCs remain intact in water, whereas in serum medium, they release their content in a temperature-dependent manner. At 37 °C, the release was relatively slow reaching 50% only after 6 h of incubation. The results are corroborated by qualitative observations based on Förster resonance energy transfer between two different encapsulated dyes. The developed method is simple because it is only based on the standard deviation of fluorescence fluctuations and, in principle, can be applied to nanocarriers of different types.

Rational design of multimodal therapeutic nanosystems for effective inhibition of tumor growth and metastasis

Simultaneous inhibition of both tumor growth and metastasis is the key to treating metastatic cancer, yet the development of effective drug delivery systems represents a great challenge since multimodal therapeutic agents must be rationally combined to overcome the biological mechanisms underpinning tumor cell proliferation and invasion. In this context, we report a hybrid therapeutic nanoscale platform that incorporates an anti-proliferative drug, doxorubicin (DOX), and an anti-NF-κB agent, p65-shRNA, for effective treatment of metastatic breast cancer. In our design, we first conjugated DOX via an acid-labile linker onto gold nanorods that were pre-modified with the tumor targeting peptide RGD and a positively charged, disulfide cross-linked short polyethylenimines (DSPEI), and then incorporated shRNA through electrostatic complexation with DSPEI. We show that this "all in one" nanotherapeutic system (RDG/shRNA@DOX) can be effectively internalized through RGD-mediated endocytosis, followed by stimuli-responsive intracellular co-release of DOX and shRNA. Our in vitro experiments suggest that this multimodal system can significantly inhibit cell proliferation, angiogenesis, and invasion of metastatic MDA-MB-435 cancer cells. Systemic administration of RDG/shRNA@DOX into a metastatic mouse model led to enhanced tumor accumulation, and, most importantly, significant inhibition of in situ tumor growth and almost complete suppression of tumor metastasis. We believe this hybrid multimodal nanotherapeutic system provides important insight into the rational design of therapeutic systems for the effective treatment of metastatic carcinoma.

STATEMENT OF SIGNIFICANCE

The key to successfully treat metastatic cancer is the simultaneous inhibition of both tumor growth and metastasis. This represents a great challenge for the design of drug delivery systems since multimodal therapeutic agents must be rationally combined to overcome the respective biological mechanisms underpinning tumor cell proliferation and invasion. Toward this end, we developed a hybrid nanomedicine platform that incorporates an anti-proliferative drug, doxorubicin (DOX), and an anti-NF-κB agent, p65-shRNA, for effective treatment of metastatic breast cancer. We showed that this multimodal system (RDG/shRNA@DOX) enhanced tumor accumulation, led to prolonged circulation, and most importantly, significant inhibition of in situ tumor growth and almost complete suppression of tumor metastasis. We believe this hybrid multimodal nanotherapeutic system provides significant insight into the rational design of therapeutic systems for the effective treatment of metastatic cancer.

Supramolecular aptamer nano-constructs for receptor-mediated targeting and light-triggered release of chemotherapeutics into cancer cells

Platforms for targeted drug-delivery must simultaneously exhibit serum stability, efficient directed cell internalization, and triggered drug release. Here, using lipid-mediated self-assembly of aptamers, we combine multiple structural motifs into a single nanoconstruct that targets hepatocyte growth factor receptor (cMet). The nanocarrier consists of lipidated versions of a cMet-binding aptamer and a separate lipidated GC-rich DNA hairpin motif loaded with intercalated doxorubicin. Multiple 2',6'-dimethylazobenzene moieties are incorporated into the doxorubicin-binding motif to trigger the release of the chemotherapeutics by photoisomerization. The lipidated DNA scaffolds self-assemble into spherical hybrid-nanoconstructs that specifically bind cMet. The combined features of the nanocarriers increase serum nuclease resistance, favor their import into cells presumably mediated by endocytosis, and allow selective photo-release of the chemotherapeutic into the targeted cells. cMet-expressing H1838 tumor cells specifically internalize drug-loaded nanoconstructs, and subsequent UV exposure enhances cell mortality. This modular approach thus paves the way for novel classes of powerful aptamer-based therapeutics.

In Vivo FRET Imaging to Predict the Risk Associated with Hepatic Accumulation of Squalene-Based Prodrug Nanoparticles

Förster resonance energy transfer (FRET) is used here for the first time to monitor the in vivo fate of nanoparticles made of the squalene-gemcitabine prodrug and two novel derivatives of squalene with the cyanine dyes 5.5 and 7.5, which behave as efficient FRET pair in the NIR region. Following intravenous administration, nanoparticles initially accumulate in the liver, then they show loss of their integrity within 2 h and clearance of the squalene bioconjugates is observed within 24 h. Such awareness is a key prerequisite before introduction into clinical settings.

Polymeric micelles: Basic research to clinical practice

Rapidly developing polymeric micelles as potential targeting carriers has intensified the need for better understanding of the underlying principles related to the selection of suitable delivery materials for designing, characterizing, drug loading, improving stability, targetability, biosafety and efficacy. The emergence of advanced analytical tools such as fluorescence resonance energy transfer and dissipative particle dynamics has identified new dimensions of these nanostructures and their behavior in much greater details. This review summarizes recent efforts in the development of polymeric micelles with respect to their architecture, formulation strategy and targeting possibilities along with their preclinical and clinical aspects. Literature of the past decade is discussed critically with special reference to the chemistry involved in the formation and clinical applications of these versatile materials. Thus, our main objective is to provide a timely update on the current status of polymeric micelles highlighting their applications and the important parameters that have led to successful delivery of drugs to the site of action.

Extremely long tumor retention, multi-responsive boronate crosslinked micelles with superior therapeutic efficacy for ovarian cancer

Mortality rates for ovarian cancer have declined only slightly in the past forty years since the "War on Cancer" was declared. The current standard care of ovarian cancer is still cytoredutive surgery followed by several cycles of chemotherapy. The severe adverse effect from chemotherapy drug is a leading cause for the patients to fail in long term therapy post-surgery. New nanocarriers able to minimize the premature drug release in blood circulation while releasing drug on-demand at tumor site have profound impact on the improvement of the efficacy and toxicity profile of the chemotherapeutic drugs. Here we reported a unique type of extremely long tumor retention, multi-responsive boronate crosslinked micelles (BCM) for ovarian cancer therapy. We systemically investigated the stability of BCM in serum and plasma, and their responsiveness to acidic pH and cis-diols (such as mannitol, a safe FDA approved drug for diuresis) through particle size measurement and förster resonance energy transfer (FRET) approach. Paclitaxel (PTX) loaded BCM (BCM-PTX) exhibited higher stability than non-crosslinked micelles (NCM) in the presence of plasma or serum. BCMs possessed a longer in vivo blood circulation time when compared to NCM. Furthermore, BCM could be disassembled in an acidic pH environment or by administrating mannitol, facilitating drug release in an acidic tumor environment and triggered by exogenous stimuli after drug enrichment in tumor mass. Near infra-red fluorescence (NIRF) imaging on SKOV-3 ovarian cancer mouse model demonstrated that the NIR dye DiD encapsulated BCM could preferentially accumulate in tumor site and their tumor retention was very long with still 66% remained on 12th day post injection. DiD-NCM had similar high-level uptake in tumor with DiD-BCM within the first 3days, its accumulation, however, decreased obviously on 4th day and only 15% dye was left 12days later. In both formulations, the dye uptake in normal organs was mostly washed away within the first 24-48h. In in vivo tumor treatment study, PTX loaded BCM showed superior therapeutic efficacy than that of NCM and Taxol. The mice could tolerate 20mg/kg PTX formulated in nano-formulations, which doubled the maximum tolerated dose (MTD) of Taxol. The administration of mannitol 24h after BCM-PTX injection further improved the tumor therapeutic effect and elongated the survival time of the mice. The novel boronate-catechol crosslinked nanocarrier platform demonstrated its superior capability in targeted drug delivery, which is not only useful for ovarian cancer treatment but will also be beneficial for the therapy of many other solid tumors.

FRET-enabled monitoring of the thermosensitive nanoscale assembly of polymeric micelles into macroscale hydrogel and sequential cognate micelles release

Thermosensitive "micellar hydrogel" is prepared based on poly(ε-caprolactone-co- 1,4,8-trioxa[4.6]spiro-9-undecanone)-b-poly(ethylene glycol)- b-poly(ε-caprolactone- co-1,4,8-trioxa[4.6]spiro-9-undecanone) (PECT) triblock copolymer. Fluorescence resonance energy transfer (FRET) is adopted to explore its assembly (formation) and disassembly (degradation) mechanism within the range of 10 nm. Results prove that the thermosensitive non-covalent aggregation of micelles facilitates the hydrogel formation and the sustained shedding of cognate micelles induces the hydrogel degradation, during which polymers are steadily incorporated in micelles without any micelle disassembly or reassembly. It is confirmed that using multiple-tags based imaging technology, such as FRET imaging, the fate of macro biodegradable materials in vitro and in vivo can be followed at a precise nano even molecular level. Such an unique hydrogel composed of nothing more than PECT micelles can act as not only an injectable nanomedicine reservoir by subcutaneous or peri-tissue administration, but also an advanced "combo" macroscale platform for co-delivery of multi-modal therapeutic agents. Our findings also indicate that biological stimuli (e.g., temperature, enzymes)-induced non-covalent micelle self-assembly may provide us an effective strategy to prepare a macroscale device from nanoscale subunits.

Lipid nanocapsules maintain full integrity after crossing a human intestinal epithelium model

Lipid nanocapsules (LNCs) have demonstrated great potential for the oral delivery of drugs having very limited oral bioavailability (BCS class II, III and IV molecules). It has been shown previously that orally-administered LNCs can permeate through mucus, increase drug absorption by the epithelial tissue, and finally, increase drug bioavailability. However, even if transport mechanisms through mucus and the intestinal barrier have already been clarified, the preservation of particle integrity is still not known. The aim of the present work is to study in vitro the fate of LNCs after their transportation across an intestinal epithelium model (Caco-2 cell model). For this, two complementary techniques were employed: Förster Resonance Energy Transfer (FRET) and Nanoparticle Tracking Analysis (NTA). Results showed, after 2h, the presence of nanoparticles in the basolateral side of the cell layer and a measurable FRET signal. This provides very good evidence for the transcellular intact crossing of the nanocarriers.

Ligand-decorated click polypeptide derived nanoparticles for targeted drug delivery applications

A ligand decorated, synthetic polypeptide block copolymer platform with environment-responsive capabilities was designed. We evaluated the potential of this system to function as a polymersome for targeted-delivery of a systemic chemotherapy to tumors. Our system employed click chemistry to provide a pH-responsive polypeptide block that drives nanoparticle assembly, and a ligand (folic acid) conjugated PEG block that targets folate-receptor over-expressing cancer cells. These nanocarriers were found to encapsulate a high loading of conventional chemotherapeutics (e.g. doxorubicin at physiological pH) and release the active therapeutic at lysosomal pH upon cellular uptake. The presence of folic acid on the nanoparticle surface facilitated their active accumulation in folate-receptor-overexpressing cancer cells (KB), compared to untargeted carriers. Folate-targeted nanoparticles loaded with doxorubicin also showed enhanced tumor accumulation in folate-receptor positive KB xenografts, resulting in the suppression of tumor growth in an in vivo hind flank xenograft mouse model.

Mechanism of hepatic targeting via oral administration of DSPE-PEG-cholic acid-modified nanoliposomes

In oral administration, gastrointestinal physiological environment, gastrointestinal epithelial cell membranes, and blood circulation are typical biological barriers to hepatic delivery of ligand-modified nanoparticle drug delivery systems. To elucidate the mechanism of oral hepatic targeting of cholic acid receptor-mediated nanoliposomes (LPs) (distearoyl phosphatidylethanolamine–polyethylene glycol–cholic acid-modified LPs, CA-LPs), evaluations were performed on colon cancer Caco-2 cell monolayers, liver cancer HepG2 cells, and a rat intestinal perfusion model. CA-LPs, ~100 nm in diameter, exhibited sustained-release behavior and had the greatest stability in rat gastrointestinal fluid and serum for both size and entrapment efficiency. CA-LPs demonstrated highest transport across Caco-2 cells and highest cellular uptake by HepG2 cells. The enhanced endocytosis of CA-LPs was found to be mediated by Na⁺/taurocholate cotransporting polypeptide and involved the caveolin-mediated endocytosis pathway. Further, we used fluorescence resonance energy transfer (FRET) technology to show that the CA-LPs maintained their structural integrity in part during the transport across the Caco-2 cell monolayer and uptake by HepG2 cells.