Hydrogels with an embossed surface: An all-in-one platform for mass production and culture of human adipose-derived stem cell spheroids

Advancements in culture technology of adipose-derived stromal/stem cells: implications for diabetes and its complications

Stem cell-based therapies exhibit considerable promise in the treatment of diabetes and its complications. Extensive research has been dedicated to elucidate the characteristics and potential applications of adipose-derived stromal/stem cells (ASCs). Three-dimensional (3D) culture, characterized by rapid advancements, holds promise for efficacious treatment of diabetes and its complications. Notably, 3D cultured ASCs manifest enhanced cellular properties and functions compared to traditional monolayer-culture. In this review, the factors influencing the biological functions of ASCs during culture are summarized. Additionally, the effects of 3D cultured techniques on cellular properties compared to two-dimensional culture is described. Furthermore, the therapeutic potential of 3D cultured ASCs in diabetes and its complications are discussed to provide insights for future research.

Enhanced burn wound healing by controlled-release 3D ADMSC-derived exosome-loaded hyaluronan hydrogel

Adipose mesenchymal stem cell (ADMSC)-derived exosomes (ADMSC-Exos) have shown great potential in regenerative medicine and been evidenced benefiting wound repair such as burns. However, the low yield, easy loss after direct coating, and no suitable loading system to improve their availability and efficacy hinder their clinical application for wound healing. And few studies focused on the comparison of biological functions between exosomes derived from different culture techniques, especially in exosome-releasing hydrogel system. Therefore, we designed a high-performance exosome controllable releasing hydrogel system for burn wound healing, namely loading 3D-printed microfiber culture-derived exosomes in a highly biocompatible hyaluronic acid (HA). In this project, we compared the biological functions in vitro and in a burn model among exosomes derived from the conventional two-dimensional (2D) plate culture (2D-Exos), microcarrier culture (2.5D-Exos), and 3D-printed microfiber culture (3D-Exos). Results showed that compared with 2D-Exos and 2.5D-Exos, 3D-Exos promoted HACATs and HUVECs cell proliferation and migration more significantly. Additionally, 3D-Exos had stronger angiogenesis-promoting effects in tube formation of (HUVECs) cells. Moreover, we found HA-loaded 3D-Exos showed better burn wound healing promotion compared to 2D-Exos and 2.5D-Exos, including accelerated burn wound healing rate and better collagen remodeling. The study findings reveal that the HA-loaded, controllable-release 3D-Exos repair system distinctly augments therapeutic efficacy in terms of wound healing, while concurrently introducing a facile application approach. This system markedly bolsters the exosomal loading efficiency, provides a robust protective milieu, and potentiates the inherent biological functionalities of the exosomes. Our findings provide a rationale for more efficient utilization of high-quality and high-yield 3D exosomes in the future, and a novel strategy for healing severe burns.

Improved Neural Inductivity of Size-Controlled 3D Human Embryonic Stem Cells Using Magnetic Nanoparticles

Background: To improve the efficiency of neural development from human embryonic stem cells, human embryoid body (hEB) generation is vital through 3-dimensional formation. However, conventional approaches still have limitations: long-term cultivation and laborious steps for lineage determination. Methods: In this study, we controlled the size of hEBs for ectodermal lineage specification using cell-penetrating magnetic nanoparticles (MNPs), which resulted in reduced time required for initial neural induction. The magnetized cells were applied to concentrated magnetic force for magnet-derived multicellular organization. The uniformly sized hEBs were differentiated in neural induction medium (NIM) and suspended condition. This neurally induced MNP-hEBs were compared with other groups. Results: As a result, the uniformly sized MNP-hEBs in NIM showed significantly improved neural inductivity through morphological analysis and expression of neural markers. Signaling pathways of the accelerated neural induction were detected via expression of representative proteins; Wnt signaling, dopaminergic neuronal pathway, intercellular communications, and mechanotransduction. Consequently, we could shorten the time necessary for early neurogenesis, thereby enhancing the neural induction efficiency. Conclusion: Overall, this study suggests not only the importance of size regulation of hEBs at initial differentiation stage but also the efficacy of MNP-based neural induction method and stimulations for enhanced neural tissue regeneration.

Use of brown adipose tissue transplantation and engineering as a thermogenic therapy in obesity and metabolic disease

The induction of thermogenesis in brown adipose tissue is emerging as an attractive therapy for obesity and metabolic syndrome. However, the long-term efficacy and safety of clinical pharmaceutical agents have yet to be fully characterized. The transplantation of brown adipose tissue represents an alternative approach that might have a therapeutic effect by inducing a long-term increase in energy expenditure. However, limited tissue resources hinder the development of transplantation. Stem cell-based therapy and brown adipose tissue engineering, in addition to transplantation, represent alternative approaches that might resolve this problem. In this article, we discuss recent advances in understanding the mechanisms and applications of brown adipose tissue transplantation in the treatment of obesity and related metabolic disorders. Specifically, the induction of brown adipocytes and the fabrication of engineered brown adipose tissue as novel transplantation resources have long-term effects on ameliorating metabolic defects in rodent models. Additionally, we explore future prospects regarding the development of three-dimensional engineered brown adipose tissue and the associated challenges.

Regulation Mechanisms and Maintenance Strategies of Stemness in Mesenchymal Stem Cells

Stemness pertains to the intrinsic ability of mesenchymal stem cells (MSCs) to undergo self-renewal and differentiate into multiple lineages, while simultaneously impeding their differentiation and preserving crucial differentiating genes in a state of quiescence and equilibrium. Owing to their favorable attributes, including uncomplicated isolation protocols, ethical compliance, and ease of procurement, MSCs have become a focal point of inquiry in the domains of regenerative medicine and tissue engineering. As age increases or ex vivo cultivation is prolonged, the functionality of MSCs decreases and their stemness gradually diminishes, thereby limiting their potential therapeutic applications. Despite the existence of several uncertainties surrounding the comprehension of MSC stemness, considerable advancements have been achieved in the clarification of the potential mechanisms that lead to stemness loss, as well as the associated strategies for stemness maintenance. This comprehensive review provides a systematic overview of the factors influencing the preservation of MSC stemness, the molecular mechanisms governing it, the strategies for its maintenance, and the therapeutic potential associated with stemness. Finally, we underscore the obstacles and prospective avenues in present investigations, providing innovative perspectives and opportunities for the preservation and therapeutic utilization of MSC stemness.

High-Voltage Electrostatic Field Hydrogel Microsphere 3D Culture System Improves Viability and Liver-like Properties of HepG2 Cells

Three-dimensional (3D) hepatocyte models have become a research hotspot for evaluating drug metabolism and hepatotoxicity. Compared to two-dimensional (2D) cultures, 3D cultures are better at mimicking the morphology and microenvironment of hepatocytes in vivo. However, commonly used 3D culture techniques are not suitable for high-throughput drug screening (HTS) due to their high cost, complex handling, and inability to simulate cell-extracellular matrix (ECM) interactions. This article describes a method for rapid and reproducible 3D cell cultures with ECM-cell interactions based on 3D culture instrumentation to provide more efficient HTS. We developed a microsphere preparation based on a high-voltage electrostatic (HVE) field and used sodium alginate- and collagen-based hydrogels as scaffolds for 3D cultures of HepG2 cells. The microsphere-generating device enables the rapid and reproducible preparation of bioactive hydrogel microspheres. This 3D culture system exhibited better cell viability, heterogeneity, and drug-metabolizing activity than 2D and other 3D culture models, and the long-term culture characteristics of this system make it suitable for predicting long-term liver toxicity. This system improves the overall applicability of HepG2 spheroids in safety assessment studies, and this simple and controllable high-throughput-compatible method shows potential for use in drug toxicity screening assays and mechanistic studies.

Mechanically induced pyroptosis enhances cardiosphere oxidative stress resistance and metabolism for myocardial infarction therapy

Current approaches in myocardial infarction treatment are limited by low cellular oxidative stress resistance, reducing the long-term survival of therapeutic cells. Here we develop a liquid-crystal substrate with unique surface properties and mechanical responsiveness to produce size-controllable cardiospheres that undergo pyroptosis to improve cellular bioactivities and resistance to oxidative stress. We perform RNA sequencing and study cell metabolism to reveal increased metabolic levels and improved mitochondrial function in the preconditioned cardiospheres. We test therapeutic outcomes in a rat model of myocardial infarction to show that cardiospheres improve long-term cardiac function, promote angiogenesis and reduce cardiac remodeling during the 3-month observation. Overall, this study presents a promising and effective system for preparing a large quantity of functional cardiospheres, showcasing potential for clinical application.

Browning of Mesenteric White Adipose Tissue in Crohn's Disease: A New Pathological Change and Therapeutic Target

BACKROUND

Hypertrophic mesenteric adipose tissue [htMAT] is a distinctive hallmark of Crohn's disease [CD], and it affects enteritis via inflammatory adipokine secretion by dysfunctional white adipocytes. White adipocytes can become beige adipocytes, which are characterized by active lipid consumption and favourable endocrine function, via white adipocyte browning. Our study aimed to determine whether white adipocyte browning occurs in htMAT and its role in CD.

METHODS

White adipocyte browning was examined in MAT samples from CD patients and controls. Human MAT explants and primary mesenteric adipocytes were cultured for in vitro experiments. Mice with 2,4,6-trinitrobenzenesulphonic acid solution [TNBS]-induced colitis were used for in vivo studies. A β3-adrenergic receptor agonist [CL316,243] was used to induce white adipocyte browning, and IL-4/STAT6 signalling was analysed to explore the mechanism underlying the anti-inflammatory activity of beige adipocytes.

RESULTS

White adipocyte browning was observed in htMAT from CD patients, as shown by the appearance of uncoupling protein 1 [UCP1]-positive multilocular [beige] adipocytes with lipid-depleting activity and anti-inflammatory endocrine profiles. Both human MAT and primary mesenteric adipocytes from CD patients and controls could be induced to undergo browning, which increased their lipid-depleting and anti-inflammatory activities in vitro. Inducing MAT browning ameliorated mesenteric hypertrophy and inflammation as well as colitis in TNBS-treated mice in vivo. The anti-inflammatory activity of beige adipocytes was at least partially related to STAT6 signalling activation via the autocrine and paracrine effects of IL-4.

CONCLUSION

White adipocyte browning is a newly identified pathological change in htMAT of CD patients and a possible therapeutic target.

Development of Hetero-Cell Type Spheroids Via Core-Shell Strategy for Enhanced Wound Healing Effect of Human Adipose-Derived Stem Cells

BACKGROUND

Stem cell-based therapies have been developed to treat various types of wounds. Human adipose-derived stem cells (hADSCs) are used to treat skin wounds owing to their outstanding angiogenic potential. Although recent studies have suggested that stem cell spheroids may help wound healing, their cell viability and retention rate in the wound area require improvement to enhance their therapeutic efficacy.

METHODS

We developed a core-shell structured spheroid with hADSCs in the core and human dermal fibroblasts (hDFs) in the outer part of the spheroid. The core-shell structure was formed by continuous centrifugation and spheroid incubation. After optimizing the method for inducing uniform-sized core-shell spheroids, cell viability, cell proliferation, migration, and therapeutic efficacy were evaluated and compared to those of conventional spheroids.

RESULTS

Cell proliferation, migration, and involucrin expression were evaluated in keratinocytes. Tubular assays in human umbilical vein endothelial cells were used to confirm the improved skin regeneration and angiogenic efficacy of core-shell spheroids. Core-shell spheroids exhibited exceptional cell viability under hypoxic cell culture conditions that mimicked the microenvironment of the wound area.

CONCLUSION

The improvement in retention rate, survival rate, and angiogenic growth factors secretion from core-shell spheroids may contribute to the increased therapeutic efficacy of stem cell treatment for skin wounds.

The interplay of cells, polymers, and vascularization in three-dimensional lung models and their applications in COVID-19 research and therapy

Millions of people have been affected ever since the emergence of the corona virus disease of 2019 (COVID-19) outbreak, leading to an urgent need for antiviral drug and vaccine development. Current experimentation on traditional two-dimensional culture (2D) fails to accurately mimic the in vivo microenvironment for the disease, while in vivo animal model testing does not faithfully replicate human COVID-19 infection. Human-based three-dimensional (3D) cell culture models such as spheroids, organoids, and organ-on-a-chip present a promising solution to these challenges. In this report, we review the recent 3D in vitro lung models used in COVID-19 infection and drug screening studies and highlight the most common types of natural and synthetic polymers used to generate 3D lung models.

Engineering Cell Microenvironment Using Nanopattern-Derived Multicellular Spheroids and Photo-Crosslinked Gelatin/Hyaluronan Hydrogels

Cell cultures of dispersed cells within hydrogels depict the interaction of the cell-extracellular matrix (ECM) in 3D, while the coculture of different cells within spheroids combines both the effects of cell-cell and cell-ECM interactions. In this study, the cell co-spheroids of human bone mesenchymal stem cells/human umbilical vein endothelial cells (HBMSC/HUVECs) are prepared with the assistance of a nanopattern, named colloidal self-assembled patterns (cSAPs), which is superior to low-adhesion surfaces. A phenol-modified gelatin/hyaluronan (Gel-Ph/HA-Ph) hydrogel is used to encapsulate the multicellular spheroids and the constructs are photo-crosslinked using blue light. The results show that Gel-Ph/HA-Ph hydrogels with a 5%-to-0.3% ratio have the best properties. Cells in HBMSC/HUVEC co-spheroids are more favorable for osteogenic differentiation (Runx2, ALP, Col1a1 and OPN) and vascular network formation (CD31+ cells) compared to HBMSC spheroids. In a subcutaneous nude mouse model, the HBMSC/HUVEC co-spheroids showed better performance than HBMSC spheroids in angiogenesis and the development of blood vessels. Overall, this study paves a new way for using nanopatterns, cell coculturing and hydrogel technology for the generation and application of multicellular spheroids.

Microstructured soft devices for the growth and analysis of populations of homogenous multicellular tumor spheroids

Multicellular tumor spheroids are rapidly emerging as an improved in vitro model with respect to more traditional 2D culturing. Microwell culturing is a simple and accessible method for generating a large number of uniformly sized spheroids, but commercially available systems often do not enable researchers to perform complete culturing and analysis pipelines and the mechanical properties of their culture environment are not commonly matching those of the target tissue. We herein report a simple method to obtain custom-designed self-built microwell arrays made of polydimethylsiloxane or agarose for uniform 3D cell structure generation. Such materials can provide an environment of tunable mechanical flexibility. We developed protocols to culture a variety of cancer and non-cancer cell lines in such devices and to perform molecular and imaging characterizations of the spheroid growth, viability, and response to pharmacological treatments. Hundreds of tumor spheroids grow (in scaffolded or scaffold-free conditions) at homogeneous rates and can be harvested at will. Microscopy imaging can be performed in situ during or at the end of the culture. Fluorescence (confocal) microscopy can be performed after in situ staining while retaining the geographic arrangement of spheroids in the plate wells. This platform can enable statistically robust investigations on cancer biology and screening of drug treatments.

Highly efficient fabrication of functional hepatocyte spheroids by a magnetic system for the rescue of acute liver failure

Engineering hepatocytes as multicellular cell spheroids can improve their viability after implantation in vivo for effective rescue of the devastating acute liver failure (ALF). However, there is still a lack of straightforward methods for efficient generation of functional hepatocyte spheroids. In this study, a magnetic system, consisting of magnetic microwell arrays and magnet blocks, is developed to realize magnetically controlled 3D cell capture and spatial confinement-mediated cell aggregation. The cell spheroids with smaller size show superior hepatic functions than the larger-sized counterparts. Notably, the intrinsic magnetism of magnetic microwell arrays can regulate superoxide anions in hepatocyte spheroids and herein promote various biological processes, including antioxidation, hepatocyte-related functions, and pro-angiogenic potential. Ectopic implantation of the functional cell spheroids in ALF-challenged mice significantly prolongs the animal survival, ameliorates inflammation, and promotes liver regeneration. Hence, application of the magnetic system for generation of functionally enhanced hepatocyte spheroids holds great potential for clinical translation in the future.

Cell-binding peptides on the material surface guide stem cell fate of adhesion, proliferation and differentiation

Human cells, especially stem cells, need to communicate and interact with extracellular matrix (ECM) proteins, which not only serve as structural components but also guide and support cell fate and properties such as cell adhesion, proliferation, survival and differentiation. The binding of the cells with ECM proteins or ECM-derived peptides via cell adhesion receptors such as integrins activates several signaling pathways that determine the cell fate, morphological change, proliferation and differentiation. The development of synthetic ECM protein-derived peptides that mimic the biological and biochemical functions of natural ECM proteins will benefit academic and clinical application. Peptides derived from or inspired by specific ECM proteins can act as agonists of each ECM protein receptor. Given that most ECM proteins function in cell adhesion via integrin receptors, many peptides have been developed that bind to specific integrin receptors. In this review, we discuss the peptide sequence, immobilization design, reaction method, and functions of several ECM protein-derived peptides. Various peptide sequences derived from mainly ECM proteins, which are used for coating or grafting on dishes, scaffolds, hydrogels, implants or nanofibers, have been developed to improve the adhesion, proliferation or differentiation of stem cells and to culture differentiated cells. This review article will help to inform the optimal choice of ECM protein-derived peptides for the development of scaffolds, implants, hydrogels, nanofibers and 2D cell culture dishes to regulate the proliferation and direct the differentiation of stem cells into specific lineages.

Therapeutic strategies of three-dimensional stem cell spheroids and organoids for tissue repair and regeneration

Three-dimensional (3D) stem cell culture systems have attracted considerable attention as a way to better mimic the complex interactions between individual cells and the extracellular matrix (ECM) that occur in vivo. Moreover, 3D cell culture systems have unique properties that help guide specific functions, growth, and processes of stem cells (e.g., embryogenesis, morphogenesis, and organogenesis). Thus, 3D stem cell culture systems that mimic in vivo environments enable basic research about various tissues and organs. In this review, we focus on the advanced therapeutic applications of stem cell-based 3D culture systems generated using different engineering techniques. Specifically, we summarize the historical advancements of 3D cell culture systems and discuss the therapeutic applications of stem cell-based spheroids and organoids, including engineering techniques for tissue repair and regeneration.

Lipedema: Insights into Morphology, Pathophysiology, and Challenges

Lipedema is an adipofascial disorder that almost exclusively affects women. Lipedema leads to chronic pain, swelling, and other discomforts due to the bilateral and asymmetrical expansion of subcutaneous adipose tissue. Although various distinctive morphological characteristics, such as the hyperproliferation of fat cells, fibrosis, and inflammation, have been characterized in the progression of lipedema, the mechanisms underlying these changes have not yet been fully investigated. In addition, it is challenging to reduce the excessive fat in lipedema patients using conventional weight-loss techniques, such as lifestyle (diet and exercise) changes, bariatric surgery, and pharmacological interventions. Therefore, lipedema patients also go through additional psychosocial distress in the absence of permanent treatment. Research to understand the pathology of lipedema is still in its infancy, but promising markers derived from exosome, cytokine, lipidomic, and metabolomic profiling studies suggest a condition distinct from obesity and lymphedema. Although genetics seems to be a substantial cause of lipedema, due to the small number of patients involved in such studies, the extrapolation of data at a broader scale is challenging. With the current lack of etiology-guided treatments for lipedema, the discovery of new promising biomarkers could provide potential solutions to combat this complex disease. This review aims to address the morphological phenotype of lipedema fat, as well as its unclear pathophysiology, with a primary emphasis on excessive interstitial fluid, extracellular matrix remodeling, and lymphatic and vasculature dysfunction. The potential mechanisms, genetic implications, and proposed biomarkers for lipedema are further discussed in detail. Finally, we mention the challenges related to lipedema and emphasize the prospects of technological interventions to benefit the lipedema community in the future.

Systematic review on spheroids from adipose‐derived stem cells: Spontaneous or artefact state?

Three-dimensional (3D) cell cultures represent the spontaneous state of stem cells with specific gene and protein molecular expression that are more alike the in vivo condition. In vitro two-dimensional (2D) cell adhesion cultures are still commonly employed for various cellular studies such as movement, proliferation and differentiation phenomena; this procedure is standardized and amply used in laboratories, however their representing the original tissue has recently been subject to questioning. Cell cultures in 2D require a support/substrate (flasks, multiwells, etc.) and use of fetal bovine serum as an adjuvant that stimulates adhesion that most likely leads to cellular aging. A 3D environment stimulates cells to grow in suspended aggregates that are defined as "spheroids." In particular, adipose stem cells (ASCs) are traditionally observed in adhesion conditions, but a recent and vast literature offers many strategies that obtain 3D cell spheroids. These cells seem to possess a greater ability in maintaining their stemness and differentiate towards all mesenchymal lineages, as demonstrated in in vitro and in vivo studies compared to adhesion cultures. To date, standardized procedures that form ASC spheroids have not yet been established. This systematic review carries out an in-depth analysis of the 76 articles produced over the past 10 years and discusses the similarities and differences in materials, techniques, and purposes to standardize the methods aimed at obtaining ASC spheroids as already described for 2D cultures.

A Simple and Efficient Strategy for Preparing a Cell-Spheroid-Based Bioink

Cell spheroids are a promising bioprinting building block that can mimic several physiological conditions in embryonic development. However, it remains challenging to efficiently prepare cell-spheroid-based bioink (Sph-bioink) with favorable printability and spheroid fusion ability. In this work, a poly(N-isopropylacrylamide) (PNIPAAm)-based porous hydrogel is developed as an "all-in-one" platform for Sph-bioink preparation. On the one hand, the nonadhesive porous structure in hydrogels is an effective tool for fabricating adipose-derived stem cell (ASC) spheroids in high yield, and the hydrogel itself also serves as a "carrier" for conveniently transferring cell spheroids to the bioprinter. On the other hand, the integration of redox/thermo-responsiveness allows the hydrogel to shift from a solid spheroid-making tool to an extrudable bioprinting medium that is sensitive to temperature. These features enabled a simple procedure for preparing Sph-bioink, in which the cell spheroids were densely packed to retain fusion capability. The present study also demonstrates that ASC spheroids formed in hydrogels have good biological preservation and superior chondrogenic differentiation, and verified the feasibility of using Sph-bioink to build custom-shaped mature cartilage. In conclusion, this strategy provides a simple, efficient, and standardized approach for Sph-bioink preparation, making it possible to produce tissue-engineered constructs with accelerated maturation and functionalization.

Spatially arranged encapsulation of stem cell spheroids within hydrogels for the regulation of spheroid fusion and cell migration

Mesenchymal stem cell spheroids have been encapsulated in hydrogels for various applications because spheroids demonstrate higher cell activity than individual cells in suspension. However, there is limited information on the effect of distance between spheroids (inter-spheroid distance) on fusion or migration in a hydrogel. In this study, we developed temperature-responsive hydrogels with surface microwell patterns to culture adipose-derived stem cell (ASC) spheroids and deliver them into a Matrigel for the investigation of the effect of inter-spheroid distance on spheroid behavior. The ASC spheroids were encapsulated successfully in a Matrigel, denoted as sandwich culture, with a specific inter-spheroid distance ranging from 100 to 400 µm. Interestingly, ASCs migrated from the host spheroid and formed a bridge-like structure between spheroids, denoted as a cellular bridge, only when the inter-spheroid distance was 200 µm. Thus, we performed a sandwich culture of human umbilical vein endothelial cells (HUVECs) and ASCs in co-cultured spheroids in the Matrigel to create a homogeneous endothelial cell network in the hydrogel. The HUVECs sprouted through the ASC cellular bridge and directly interacted with the adjacent spheroid when the inter-spheroid distance was 200 µm. Similar results were obtained from an in vivo study. Thus, our study suggests the appropriate inter-spheroid distance for effective spheroid encapsulation in a hydrogel. STATEMENT OF SIGNIFICANCE: Recently, spheroid-based 3D tissue culture techniques such as spheroid encapsulation or 3D printing are being intensively investigated for various purposes. However, there is limited research regarding the effect of the inter-spheroid distance on spheroid communication. Here, we demonstrate a spatially arranged spheroid encapsulation method within a Matrigel by using a temperature-responsive hydrogel. Human adipose-derived stem cell spheroids are encapsulated with a precisely controlled inter-spheroid distance from 100 to 400 µm and show different tendencies in cell migration and spheroid fusion. Our results suggest that the inter-spheroid distance affects spheroid communication, and thus, the inter-spheroid distance needs to be considered carefully according to the purpose.

Applications of 3D Bioprinting Technology in Induced Pluripotent Stem Cells-Based Tissue Engineering

Induced pluripotent stem cells (iPSCs) are essentially produced by the genetic reprogramming of adult cells. Moreover, iPSC technology prevents the genetic manipulation of embryos. Hence, with the ensured element of safety, they rarely cause ethical concerns when utilized in tissue engineering. Several cumulative outcomes have demonstrated the functional superiority and potency of iPSCs in advanced regenerative medicine. Recently, an emerging trend in 3D bioprinting technology has been a more comprehensive approach to iPSC-based tissue engineering. The principal aim of this review is to provide an understanding of the applications of 3D bioprinting in iPSC-based tissue engineering. This review discusses the generation of iPSCs based on their distinct purpose, divided into two categories: (1) undifferentiated iPSCs applied with 3D bioprinting; (2) differentiated iPSCs applied with 3D bioprinting. Their significant potential is analyzed. Lastly, various applications for engineering tissues and organs have been introduced and discussed in detail.

Photoactive 3D-Printed Hypertensile Metamaterials for Improving Dynamic Modeling of Stem Cells

Current three-dimensional (3D) cell culture systems mainly rely on static cell culture and lack the ability to thoroughly manage cell intrinsic behaviors and biological characteristics, leading to unsatisfied cell activity. Herein, we have developed photoactive 3D-printed hypertensile metamaterials based dynamic cell culture system (MetaFold) for guiding cell fate. MetaFold exhibited high elasticity and photothermal conversion efficiency due to its metapattern architecture and micro/nanoscale polydopamine coating, allowing for responding to mechanical and light stimulation to construct dynamic culture conditions. In addition, MetaFold possessed excellent cell adhesion capability and could promote cell viability and function under dynamic stimulation, thereby maximizing cell activity. Importantly, MetaFold could improve the differentiation efficacy of stem cells into cardiomyocytes and even their maturation, offering high-quality precious candidates for cell therapy. Therefore, we present a dual stimuli-responsive dynamic culture system, which provides a physiologically realistic environment for cell culture and biological study.

Strategies for improving adipose-derived stem cells for tissue regeneration

Adipose-derived stem cells (ADSCs) have promising applications in tissue regeneration. Currently, there are only a few ADSC products that have been approved for clinical use. The clinical application of ADSCs still faces many challenges. Here, we review emerging strategies to improve the therapeutic efficacy of ADSCs in tissue regeneration. First, a great quantity of cells is often needed for the stem cell therapies, which requires the advanced cell expansion technologies. In addition cell-derived products are also required for the development of ‘cell-free’ therapies to overcome the drawbacks of cell-based therapies. Second, it is necessary to strengthen the regenerative functions of ADSCs, including viability, differentiation and paracrine ability, for the tissue repair and regeneration required for different physiological and pathophysiological conditions. Third, poor delivery efficiency also restricts the therapeutic effect of ADSCs. Effective methods to improve cell delivery include alleviating harsh microenvironments, enhancing targeting ability and prolonging cell retention. Moreover, we also point out some critical issues about the sources, effectiveness and safety of ADSCs. With these advanced strategies to improve the therapeutic efficacy of ADSCs, ADSC-based treatment holds great promise for clinical applications in tissue regeneration.

Effects of mechanical properties of gelatin methacryloyl hydrogels on encapsulated stem cell spheroids for 3D tissue engineering

Cell spheroids are three-dimensional cell aggregates that have been widely employed in tissue engineering. Spheroid encapsulation has been explored as a method to enhance cell-cell interactions. However, the effect of hydrogel mechanical properties on spheroids, specifically soft hydrogels (<1 kPa), has not yet been studied. In this study, we determined the effect of encapsulation of stem cell spheroids by hydrogels crosslinked with different concentrations of gelatin methacryloyl (GelMA) on the functions of the stem cells. To this end, human adipose-derived stem cell (ADSC) spheroids with a defined size were prepared, and spheroid-laden hydrogels with various concentrations (5, 10, 15%) were fabricated. The apoptotic index of cells from spheroids encapsulated in the 15% hydrogel was high. The migration distance was five-fold higher in cells encapsulated in the 5% hydrogel than the 10% hydrogel. After 14 days of culture, cells from spheroids in the 5% hydrogel were observed to have spread and proliferated. Osteogenic factor and pro-angiogenic factor production in the 15% hydrogel was high. Collectively, our results indicate that the functionality of spheroids can be regulated by the mechanical properties of hydrogel, even under 1 kPa. These results indicate that spheroid-laden hydrogels are suitable for use in 3D tissue construction.

A scalable coaxial bioprinting technology for mesenchymal stem cell microfiber fabrication and high extracellular vesicle yield

Mesenchymal stem cell (MSC)-derived extracellular vesicles (EVs) are promising candidates for regenerative medicine; however, the lack of scalable methods for high quantity EV production limits their application. In addition, signature EV-derived proteins shared in 3D environments and 2D surfaces, remain mostly unknown. Herein, we present a platform combining MSC microfiber culture with ultracentrifugation purification for high EV yield. Within this platform, a high quantity MSC solution (∼3 × 10⁸total cells) is encapsulated in a meter-long hollow hydrogel-microfiber via coaxial bioprinting technology. In this 3D core-shell microfiber environment, MSCs express higher levels of stemness markers (Oct4, Nanog, Sox2) than in 2D culture, and maintain their differentiation capacity. Moreover, this platform enriches particles by ∼1009-fold compared to conventional 2D culture, while preserving their pro-angiogenic properties. Liquid chromatography-mass spectrometry characterization results demonstrate that EVs derived from our platform and conventional 2D culturing have unique protein profiles with 3D-EVs having a greater variety of proteins (1023 vs 605), however, they also share certain proteins (536) and signature MSC-EV proteins (10). This platform, therefore, provides a new tool for EV production using microfibers in one culture dish, thereby reducing space, labor, time, and cost.

Calcium Peroxide-Containing Polydimethylsiloxane-Based Microwells for Inhibiting Cell Death in Spheroids through Improved Oxygen Supply

Multicellular spheroids are expected to be used for in vivo-like tissue models and cell transplantation. Microwell devices are useful for the fabrication of multicellular spheroids to improve productivity and regulate their size. However, the high cell density in microwell devices leads to accelerated cell death. In this study, we developed O₂-generating microwells by incorporating calcium peroxide (CaO₂) into polydimethylsiloxane (PDMS)-based microwells. The CaO₂-containing PDMS was shown to generate O₂ for 3 d. Then, CaO₂-containing PDMS was used to fabricate O₂-generating microwells using a micro-molding technique. When human hepatocellular carcinoma (HepG2) spheroids were prepared using the conventional microwells, the O₂ concentration in the culture medium reduced to approx. 67% of the cell-free level. In contrast, the O₂-generating microwells maintained O₂ at constant levels. The HepG2 spheroids prepared using the O₂-generating microwells had a larger number of live cells than those prepared using the conventional microwells. In addition, the O₂-generating microwells rescued hypoxia in the HepG2 spheroids and increased cell viability. Lastly, the O₂-generating microwells were also useful for the preparation of multicellular spheroids of other cell types (i.e., MIN6, B16-BL6, and adipose-derived stem cells) with high cell viability. These results showed that the O₂-generating microwells are useful for preparing multicellular spheroids with high cell viability.

One-step harvest and delivery of micropatterned cell sheets mimicking the multi-cellular microenvironment of vascularized tissue

Techniques for harvest and delivery of cell sheets have been improving for decades. However, cell sheets with complicated patterns closely related to natural tissue architecture were hardly achieved. Here, we developed an efficient method to culture and harvest cell sheets with complex shape (noted as microtissues) using temperature-responsive hydrogel consisting of expandable polyethylene oxide polymer at low temperature. Firstly, a temperature-responsive hydrogel surface with honeycomb patterns (50 and 100 µm in width) were developed through microcontact printing of polydopamine (PD). The human dermal fibroblasts (HDFBs) and human umbilical vein endothelial cells (HUVECs) spontaneously formed honeycomb-shaped microtissues on the patterned hydrogel surface. The microtissues on the hydrogel were able to be harvested and directly delivered to the desired target through thermal expansion of the hydrogel at 4 °C with an efficiency close to 80% within 10 min which is faster than conventional method based on poly(N-isopropylacrylamide). The microtissues maintained their original honeycomb network and intact structures. Honeycomb-patterned cell sheets also were fabricated through serial seeding of various cell lines, including HDFBs, HUVECs, and human adipose-derived stem cells, in which cells were attached along the honeycomb pattern. The underlying honeycomb patterns in the cell sheets were successfully maintained for 3 days, even after delivery. In addition, patterned cell sheets were successfully delivered in vivo while maintaining an intact structure for 7 days. Together, our findings demonstrate that micropatterned temperature-responsive hydrogel is an efficient method of one-step culturing and delivery of complex microtissues and should prove useful in various tissue engineering applications. STATEMENT OF SIGNIFICANCE: Scaffold-free cell delivery techniques, including cell sheet engineering, have been developed for decades. However, there is limited research regarding culture and delivery of microtissues with complex architecture mimicking natural tissue. Herein, we developed a micro-patterned hydrogel platform for the culture and delivery of honeycomb-shaped microtissues. Honeycomb patterns were chemically engineered on the temperature-responsive hydrogel through microcontact printing of polydopamine to selectively allow for human dermal fibroblast or human umbilical vein endothelial cell adhesion. They spontaneously formed honeycomb-shaped microtissues within 24 hr upon cell seeding and directly delivered to various target area including in vivo via thermal expansion of the hydrogel at 4 °C, suggesting that the micro-patterned hydrogel can be an efficient tool for culture and delivery of complex microtissue.

The Translational Application of Hydrogel for Organoid Technology: Challenges and Future Perspectives

Human organoids mimic the physiology and tissue architecture of organs and are of great significance for promoting the study of human diseases. Traditionally, organoid cultures rely predominantly on animal or tumor-derived extracellular matrix (ECM), resulting in poor reproducibility. This limits their utility in for large-scale drug screening and application for regenerative medicine. Recently, synthetic polymeric hydrogels, with high biocompatibility and biodegradability, stability, uniformity of compositions, and high throughput properties, have emerged as potential materials for achieving 3D architectures for organoid cultures. Compared to conventional animal or tumor-derived organoids, these newly engineered hydrogel-based organoids more closely resemble human organs, as they are able to mimic native structural and functional properties observed in-situ. In this review, recent developments in hydrogel-based organoid culture will be summarized, emergent hydrogel technology will be highlighted, and future challenges in applying them to organoid culture will be discussed.

Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends

Three-dimensional (3D) bioprinting has become mainstream for precise and repeatable high-throughput fabrication of complex cell cultures and tissue constructs in drug testing and regenerative medicine, food products, dental and medical implants, biosensors, and so forth. Due to this tremendous growth in demand, an overwhelming amount of hardware manufacturers have recently flooded the market with different types of low-cost bioprinter models-a price segment that is most affordable to typical-sized laboratories. These machines range in sophistication, type of the underlying printing technology, and possible add-ons/features, which makes the selection process rather daunting (especially for a nonexpert customer). Yet, the review articles available in the literature mostly focus on the technical aspects of the printer technologies under development, as opposed to explaining the differences in what is already on the market. In contrast, this paper provides a snapshot of the fast-evolving low-cost bioprinter niche, as well as reputation profiles (relevant to delivery time, part quality, adherence to specifications, warranty, maintenance, etc.) of the companies selling these machines. Specifically, models spanning three dominant technologies-microextrusion, droplet-based/inkjet, and light-based/crosslinking-are reviewed. Additionally, representative examples of high-end competitors (including up-and-coming microfluidics-based bioprinters) are discussed to highlight their major differences and advantages relative to the low-cost models. Finally, forecasts are made based on the trends observed during this survey, as to the anticipated trickling down of the high-end technologies to the low-cost printers. Overall, this paper provides insight for guiding buyers on a limited budget toward making informed purchasing decisions in this fast-paced market.

Tissue Engineering Microtissue: Construction, Optimization, and Application

Until now, there is no clear definition of microtissue; it usually refers to the microtissue formed by the aggregation of seed cells under the action of cell-cell or cell-extracellular matrix (ECM). Compared with traditional cell monolayer culture, cells are cultivated into a three-dimensional microstructure in a specific way. The microstructure characteristics of microtissue are similar to natural tissues and can promote cell proliferation and differentiation. Therefore, it has a broader range of biomedical applications in tissue engineering. The traditional tissue engineering strategy is to add high-density seed cells and biomolecules on a preformed scaffold to construct a tissue engineering graft. However, due to the destruction of the ECM of the cells cultured in a monolayer during the digestion process with trypsin, the uneven distribution of the cells in the scaffold, and the damage of various adverse factors after the cells are implanted in the scaffold, this strategy is often ineffective, and the subsequent applications still face challenges. This article reviews the latest researches of a new strategy-tissue engineering microtissue strategy; discuss several traditional construction methods, structure, and function optimization; and practical application of microtissue. The review aims to provide a reference for future research on tissue engineering microtissue. Impact statement The traditional tissue engineering strategies have several disadvantages, researchers have conducted extensive research on tissue engineering microtissues in recent years, and they make significant progress. Microtissue is a kind of microtissue with three-dimensional structure, its microstructure is similar to that of natural tissue. In addition, microtissue implantation can protect cells from mechanical interference, inflammation, and other adverse factors. Furthermore, it improves the survival rate of cells and the therapeutic effect of tissue-engineered grafts. However, the practical conditions, advantages, and disadvantages of tissue engineering microtissue have not been fully elucidated. The purpose of this review is to discuss the latest research progress of microtissue and provide a reference for future research.

A bioprinted composite hydrogel with controlled shear stress on cells

In recent decades, three dimensional (3D) bio-printing technology has found widespread use in tissue engineering applications. The aim of this study is to scrutinize different parameters of the bioprinter - with the help of simulation software - to print a hydrogel so much so that avoid high amounts of shear stress which is detrimental for cell viability and cell proliferation. Rheology analysis was done on several hydrogels composed of different percentages of components: alginate, collagen, and gelatin. The results have led to the combination of percentages collagen:alginate:gelatin (1:4:8)% as the best condition which makes sol-gel transition at room temperature possible. The results have shown the highest diffusion rate and cell viability for the cross-linked sample with 1.5% CaCl₂ for the duration of 1 h. Finally, we have succeeded in printing the hydrogel that is mechanically strong with suitable degradation rate and cell viability.

Engineering Multi-Cellular Spheroids for Tissue Engineering and Regenerative Medicine

Multi-cellular spheroids are formed as a 3D structure with dense cell-cell/cell-extracellular matrix interactions, and thus, have been widely utilized as implantable therapeutics and various ex vivo tissue models in tissue engineering. In principle, spheroid culture methods maximize cell-cell cohesion and induce spontaneous cellular assembly while minimizing cellular interactions with substrates by using physical forces such as gravitational or centrifugal forces, protein-repellant biomaterials, and micro-structured surfaces. In addition, biofunctional materials including magnetic nanoparticles, polymer microspheres, and nanofiber particles are combined with cells to harvest composite spheroids, to accelerate spheroid formation, to increase the mechanical properties and viability of spheroids, and to direct differentiation of stem cells into desirable cell types. Biocompatible hydrogels are developed to produce microgels for the fabrication of size-controlled spheroids with high efficiency. Recently, spheroids have been further engineered to fabricate structurally and functionally reliable in vitro artificial 3D tissues of the desired shape with enhanced specific biological functions. This paper reviews the overall characteristics of spheroids and general/advanced spheroid culture techniques. Significant roles of functional biomaterials in advanced spheroid engineering with emphasis on the use of spheroids in the reconstruction of artificial 3D tissue for tissue engineering are also thoroughly discussed.

Differentiation of induced pluripotent stem cells to hepatocyte-like cells on cellulose nanofibril substrate

Differentiation of hepatocyte-like cells (HLCs) from human induced pluripotent stem cells (iPSCs) in vitro has great potential in regenerative medicine. Current protocol uses matrigel of animal origin as a substrate for the differentiation of iPSCs to HLCs. Use of an appropriate non-xenogenic substrate is very important for potential future clinical applications. Towards this goal, we used Cellulose Nanofibril (CNF) gel, a natural, non-toxic, biocompatible and biodegradable polymer in humans as a thin film substrate for the differentiation of iPSCs to HLCs. Here we demonstrated that CNF as a substrate film can efficiently differentiate human iPSCs to HLCs. We investigated the expression profile of the endoderm markers (SOX17 and CXCR4), hepatoblast markers (EpCAM and AFP) and mature hepatocyte marker (ASGPR1) by flow cytometry during the differentiation of iPSCs to HLCs on both CNF and matrigel substrates. We also tested the HLCs generated from both the substrates for the expression of hepatic markers such as A1AT, HNF4A, CYP450 isotypes by Real Time-PCR and its mature hepatocyte functions (lipid accumulation and albumin expression). Our results showed that the differentiated HLCs from both the substrates are comparable and expressed stage specific hepatocyte markers as well as functional maturity. We have demonstrated that CNF, a natural biomaterial, may be used in tissue engineering applications as a potential substrate for the differentiation of iPSCs to HLCs.

A review of manufacturing capabilities of cell spheroid generation technologies and future development

Spheroid culture provides cells with a three-dimensional environment that can better mimic physiological conditions compared to monolayer culture. Technologies involved in the generation of cell spheroids are continuously being innovated to produce spheroids with enhanced properties. In this paper, we review the manufacturing capabilities of current cell spheroid generation technologies. We propose that spheroid generation technologies should enable tight and robust process controls to produce spheroids of consistent and repeatable quality. Future technology development for the generation of cell spheroids should look into improvement in process control, standardization, scalability and monitoring, in addition to advanced methods of spheroid transfer and characterization.

Characterization of adipose-derived stromal/stem cell spheroids versus single-cell suspension in cell survival and arrest of osteoarthritis progression

The current study evaluated the hypothesis that the administration of spheroidal adipose-derived stromal/stem cells (ASCs) promotes cell survival and arrests the progression of surgically induced osteoarthritis (OA) in a rat model. We also tested the optimal conditions for spheroid production from ASCs using microwell methods. The formation of ASC spheroids was optimized at a well diameter of 600 μm under cell concentrations of 10⁶ cell/ml. When ASC spheroids cultured in 3D were compared with ASCs cultured in 2D monolayer, the cell survival and chondrogenic potential were enhanced while the apoptosis was reduced in ASC spheroids compared with ASCs in 2D monolayer culture. In vivo tracking of fluorescently labeled ASCs in the knee joints of rats with surgically induced OA showed longer fluorescent activity at a higher intensity in ASC spheroids than in ASC single-cell suspension. When OA-induced rats treated with ASC injection were sacrificed after 8 weeks, the OARSI score was enhanced in both ASC single-cell suspension and ASC spheroids compared with negative control, spheroid treatment resulting in a better score than single-cell treatment. However, injected cells were not detectable from the joints. These finding altogether suggests that ASC spheroids have better in vitro and in vivo survival and chondrogenic potential and exert greater regenerative effects for articular cartilage and arrest the progression of surgically induced OA better than ASCs in single-cell suspension by the paracrine mode of action. The study findings support the notion of developing cell therapeutics to treat OA based on ASC spheroid forms.

Potential Applications of Microfluidics to Acute Kidney Injury Associated with Viral Infection

The kidneys are susceptible to adverse effects from many diseases, including several that are not tissue-specific. Acute kidney injury is a common complication of systemic diseases such as diabetes, lupus, and certain infections including the novel coronavirus (SARS-CoV-2). Microfluidic devices are an attractive option for disease modeling, offering the opportunity to utilize human cells, control experimental and environmental conditions, and combine with other on-chip devices. For researchers with expertise in microfluidics, this brief perspective highlights potential applications of such devices to studying SARS-CoV-2-induced kidney injury.

Promotion of Hair Growth by Conditioned Medium from Extracellular Matrix/Stromal Vascular Fraction Gel in C57BL/6 Mice

Adipose-derived stem cell- (ADSC-) based regenerative medicine has expanded to include the treatment of hair loss. However, stem cell therapy remains a relatively recent technique, and reports of its use for treating alopecia are rare. ADSCs exert biological functions via the paracrine actions of various growth factors and cytokines. Conditioned medium from ADSCs (ADSCs-CM) is a cell-free suspension rich in growth factors and cytokines that has demonstrated a significant role in stimulating hair growth, with encouraging outcomes in terms of hair regeneration and hair growth. Extracellular matrix/stromal vascular fraction gel (ECM/SVF-gel) is an ADSC- and adipose native extracellular matrix-enriched product for cytotherapy. In this study, we compared the effects of CM from ECM/SVF-gel (ECM/SVF-CM) and from stem cells (SVF-CM) on hair growth in mice. ECM/SVF-CM stimulated hair growth more than SVF-CM, through promoting the proliferation of dermal papilla cells and cells in the bulge, neovascularization, and anagen induction. ECM/SVF-CM might, thus, provide an effective and improved strategy for promoting hair growth. These data provide a theoretical foundation for the clinical administration of ECM/SVF-CM for the treatment of hair loss.

Development of a Novel Hanging Drop Platform for Engineering Controllable 3D Microenvironments

Conventional biomedical research is mostly performed by utilizing a two-dimensional monolayer culture, which fails to recapitulate the three-dimensional (3D) organization and microenvironment of native tissues. To overcome this limitation, several methods are developed to fabricate microtissues with the desired 3D microenvironment. However, they tend to be time-consuming, labor-intensive, or costly, thus hindering the application of 3D microtissues as models in a wide variety of research fields. In the present study, we have developed a pressure-assisted network for droplet accumulation (PANDA) system, an easy-to-use chip that comprises a multichannel fluidic system and a hanging drop cell culture module for uniform 3D microtissue formation. This system can control the desired artificial niches for modulating the fate of the stem cells to form the different sizes of microtissue by adjusting the seeding density. Furthermore, a large number of highly consistent 3D glomerulus-like heterogeneous microtissues that are composed of kidney glomerular podocytes and mesenchymal stem cells have been formed successfully. These data suggest that the developed PANDA system can be employed as a rapid and economical platform to fabricate microtissues with tunable 3D microenvironment and cellular heterogeneity, thus can be employed as tissue-mimicking models in various biomedical research.

Human Adipose-Derived Mesenchymal Stromal/Stem Cell Spheroids Possess High Adipogenic Capacity and Acquire an Adipose Tissue-like Extracellular Matrix Pattern

Adipose-derived mesenchymal stromal/stem cells (ASCs) represent a commonly used cell source for adipose tissue engineering. In this context, ASCs have routinely been cultured in conventional 2D culture and applied as single cell suspension for seeding onto scaffold materials or direct injection. However, this approach is associated with the loss of their intrinsic 3D microenvironment and leads to impaired regenerative capacity of the cells. Thus, the application of ASCs as self-assembled 3D spheroids with cells residing in their own matrix is an attractive alternative. However, characterization of the structural features and differentiation capacity of the spheroids is necessary to effectively apply them as building blocks in adipose tissue engineering. In this study, we focus on extracellular matrix (ECM) development in ASC spheroids, as well as adipogenic differentiation in comparison to conventional 2D culture using different induction protocols. Reproducible assembly of ASCs into spheroids was achieved within 24 h using the liquid overlay technique. Undifferentiated spheroids displayed a stromal ECM pattern, with fibronectin, collagen V, and VI as the main components. In the course of adipogenesis, a dynamic shift in the ECM composition toward an adipogenic phenotype was observed, associated with enhanced expression of laminin, collagen I, IV, V, and VI, similar to native fat. Furthermore, adipogenic differentiation was enhanced in spheroids as compared with 2D cultured cells, with the spheroids needing a distinctly shorter adipogenic stimulus to sustain adipogenesis, which was demonstrated based on analysis of triglyceride content and adipogenic marker gene expression. In summary, culturing ASCs as spheroids can enhance their adipogenic capacity and generate adipose-like microtissues, which may be a promising cell delivery strategy for adipose tissue engineering approaches. Impact statement Adipose-derived mesenchymal stromal/stem cells (ASCs) as a widely used cell source for adipose tissue engineering have been shown to be limited in their regenerative capacity when applied as single cells. As an alternative approach, the delivery as spheroids, consisting of cells in a 3D context, may be favorable. However, insights into extracellular matrix (ECM) development and efficient adipogenic differentiation are required for their effective application. In this study, we show that differentiated ASC spheroids develop an ECM, resembling native adipose tissue. Furthermore, the ASC spheroids exhibited a superior differentiation capacity as compared with conventional 2D culture, and required only a short adipogenic induction stimulus. Our results identify ASC-derived spheroids as an attractive cell delivery method for adipose tissue engineering approaches.

3D-bioprinted functional and biomimetic hydrogel scaffolds incorporated with nanosilicates to promote bone healing in rat calvarial defect model

Three-dimensional (3D) bioprinting is an extremely convenient biofabrication technique for creating biomimetic tissue-engineered bone constructs and has promising applications in regenerative medicine. However, existing bioinks have shown low mechanical strength, poor osteoinductive ability, and lacking a suitable microenvironment for laden cells. Nanosilicate (nSi) has shown to be a promising biomaterial, due to its unique properties such as excellent biocompatibility, degrade into nontoxic products, and with osteoinductive properties, which has been used in bone bioprinting. However, the long term bone healing effects and associating risks, if any, of using nSi in tissue engineering bone scaffolds in vivo are unclear and require a more thorough assessment prior to practical use. Hence, a functional and biomimetic nanocomposite bioink composed of rat bone marrow mesenchymal stem cells (rBMSCs), nSi, gelatin and alginate for the 3D bioprinting of tissue-engineered bone constructs is firstly demonstrated, mimicking the structure of extracellular matrix, to create a conducive microenvironment for encapsulated cells. It is shown that the addition of nSi significantly increases the printability and mechanical strength of fabricated human-scale tissue or organ structures (up to 15 mm height) and induces osteogenic differentiation of the encapsulated rBMSCs in the absence of in vitro osteoinductive factors. A systematic in vivo research of the biomimetic nanocomposite bioink scaffolds is further demonstrated in a rat critical-size (8 mm) bone defect-repair model. The in vivo results demonstrate that the 3D bioprinted nanocomposite scaffolds can significantly promote the bone healing of the rat calvarial defects compared to other scaffolds without nSi or cells, and show rarely side effects on the recipients. Given the above advantageous properties, the 3D bioprinted nanocomposite scaffolds can greatly accelerate the bone healing in critical bone defects, thus providing a clinical potential candidate for orthopedic applications.

Bioprinting predifferentiated adipose-derived mesenchymal stem cell spheroids with methacrylated gelatin ink for adipose tissue engineering

The increasing number of mastectomies results in a greater demand for breast reconstruction characterized by simplicity and a low complication profile. Reconstructive surgeons are investigating tissue engineering (TE) strategies to overcome the current surgical drawbacks. 3D bioprinting is the rising technique for the fabrication of large tissue constructs which provides a potential solution for unmet clinical needs in breast reconstruction building on decades of experience in autologous fat grafting, adipose-derived mesenchymal stem cell (ASC) biology and TE. A scaffold was bioprinted using encapsulated ASC spheroids in methacrylated gelatin ink (GelMA). Uniform ASC spheroids with an ideal geometry and diameter for bioprinting were formed, using a high-throughput non-adhesive agarose microwell system. ASC spheroids in adipogenic differentiation medium (ADM) were evaluated through live/dead staining, histology (HE, Oil Red O), TEM and RT-qPCR. Viable spheroids were obtained for up to 14 days post-printing and showed multilocular microvacuoles and successful differentiation toward mature adipocytes shown by gene expression analysis. Moreover, spheroids were able to assemble at random in GelMA, creating a macrotissue. Combining the advantage of microtissues to self-assemble and the controlled organization by bioprinting technologies, these ASC spheroids can be useful as building blocks for the engineering of soft tissue implants.

Microfluidic Approach to Generate a Tadpole-Egg-Shaped Alginate Fiber and Its Application in Tissue Engineering

Herein, we introduce a facile microfluidic technique to produce a hybrid alginate fiber with a tadpole-egg shape. A triple-flow polydimethylsiloxane microfluidic device was constructed to allow the formation of oil droplets inside the alginate stream and was instantaneously gelated with the coaxially adjacent CaCl₂. The fiber entrapping the uniform oil droplets was dehydrated, leading to the formation of a distinct tadpole-egg-shaped structure. A series of diverse fiber architectures was fabricated in a controlled manner based on the flow rates of the relevant flows. The tadpole-egg-shaped alginate fibers were employed as building blocks to create a three-dimensional microwell template for cell cultures. First, the tadpole-egg-shaped alginate fibers containing the oil droplets were half-dipped into a melted agarose solution. After the solidification of the agarose gel, the alginate fibers were degraded by an ethylenediaminetetraacetic acid (EDTA) solution to generate the hemispherical microwells. Mesenchymal stem cells (MSCs) were cultured in the microwells to generate spheroids, which were induced into chondrocytes using transforming growth factor-β3. The formed MSC spheroids exhibited a relatively high ratio of cell viability with more than 95% live cells after 14 days of culture. The success of the chondrogenic differentiation was proven based on staining (Safranin O) and the glycosaminoglycan levels. The latter was significantly higher in spheroids that were induced to form chondrocytes compared to those that were not induced after 21 days of differentiation. Second, we investigated the potential of the tadpole-egg-shaped alginate fibers as microcarriers for applications in drug delivery and implantable technologies. It was revealed that the degradation of the Ca-alginate wall of the hybrid fibers to release the oil droplets required an EDTA solution with a concentration of 500 mM for a 15 min period. This result can be used to further develop the tadpole-egg-shaped alginate fibers as uniform microcarriers with multiple compartments.

Spheroid Culture System Methods and Applications for Mesenchymal Stem Cells

Owing to the importance of stem cell culture systems in clinical applications, researchers have extensively studied them to optimize the culture conditions and increase efficiency of cell culture. A spheroid culture system provides a similar physicochemical environment in vivo by facilitating cell–cell and cell–matrix interaction to overcome the limitations of traditional monolayer cell culture. In suspension culture, aggregates of adjacent cells form a spheroid shape having wide utility in tumor and cancer research, therapeutic transplantation, drug screening, and clinical study, as well as organic culture. There are various spheroid culture methods such as hanging drop, gel embedding, magnetic levitation, and spinner culture. Lately, efforts are being made to apply the spheroid culture system to the study of drug delivery platforms and co-cultures, and to regulate differentiation and pluripotency. To study spheroid cell culture, various kinds of biomaterials are used as building forms of hydrogel, film, particle, and bead, depending upon the requirement. However, spheroid cell culture system has limitations such as hypoxia and necrosis in the spheroid core. In addition, studies should focus on methods to dissociate cells from spheroid into single cells.

Volume Adaptation Controls Stem Cell Mechanotransduction

Recent studies have found discordant mechanosensitive outcomes when comparing 2D and 3D, highlighting the need for tools to study mechanotransduction in 3D across a wide spectrum of stiffness. A gelatin methacryloyl (GelMA) hydrogel with a continuous stiffness gradient ranging from 5 to 38 kPa was developed to recapitulate physiological stiffness conditions. Adipose-derived stem cells (ASCs) were encapsulated in this hydrogel, and their morphological characteristics and expression of both mechanosensitive proteins (Lamin A, YAP, and MRTFa) and differentiation markers (PPARγ and RUNX2) were analyzed. Low-stiffness regions (∼8 kPa) permitted increased cellular and nuclear volume and enhanced mechanosensitive protein localization in the nucleus. This trend was reversed in high stiffness regions (∼30 kPa), where decreased cellular and nuclear volumes and reduced mechanosensitive protein nuclear localization were observed. Interestingly, cells in soft regions exhibited enhanced osteogenic RUNX2 expression, while those in stiff regions upregulated the adipogenic regulator PPARγ, suggesting that volume, not substrate stiffness, is sufficient to drive 3D stem cell differentiation. Inhibition of myosin II (Blebbistatin) and ROCK (Y-27632), both key drivers of actomyosin contractility, resulted in reduced cell volume, especially in low-stiffness regions, causing a decorrelation between volume expansion and mechanosensitive protein localization. Constitutively active and inactive forms of the canonical downstream mechanotransduction effector TAZ were stably transfected into ASCs. Activated TAZ resulted in higher cellular volume despite increasing stiffness and a consistent, stiffness-independent translocation of YAP and MRTFa into the nucleus. Thus, volume adaptation as a function of 3D matrix stiffness can control stem cell mechanotransduction and differentiation.

Advances in Hydrogels in Organoids and Organs-on-a-Chip

Significant advances in materials, microscale technology, and stem cell biology have enabled the construction of 3D tissues and organs, which will ultimately lead to more effective diagnostics and therapy. Organoids and organs-on-a-chip (OOC), evolved from developmental biology and bioengineering principles, have emerged as major technological breakthrough and distinct model systems to revolutionize biomedical research and drug discovery by recapitulating the key structural and functional complexity of human organs in vitro. There is growing interest in the development of functional biomaterials, especially hydrogels, for utilization in these promising systems to build more physiologically relevant 3D tissues with defined properties. The remarkable properties of defined hydrogels as proper extracellular matrix that can instruct cellular behaviors are presented. The recent trend where functional hydrogels are integrated into organoids and OOC systems for the construction of 3D tissue models is highlighted. Future opportunities and perspectives in the development of advanced hydrogels toward accelerating organoids and OOC research in biomedical applications are also discussed.

The effect of human platelet lysate on the differentiation ability of human adipose-derived stem cells cultured on ECM-coated surfaces

Human mesenchymal stem cells (hMSCs), such as human adipose-derived stem cells (hADSCs), present heterogeneous characteristics, including varying differentiation abilities and genotypes. hADSCs isolated under different conditions exhibit differences in stemness. We isolated hADSCs from human fat tissues via culture on different cell culture biomaterials including tissue culture polystyrene (TCPS) dishes and extracellular matrix protein (ECM)-coated dishes in medium supplemented with 5% or 10% serum-converted human platelet lysate (hPL) or 10% fetal bovine serum (FBS) as a control. Currently, it is not clear whether xeno-free hPL in the cell culture medium promotes the ability of hMSCs such as hADSCs to differentiate into several cell lineages compared to the xenomaterial FBS. We investigated whether a synchronized effect of ECM (Matrigel, fibronectin, and recombinant vitronectin) coatings on TCPS dishes for efficient hADSC differentiation could be observed when hADSCs were cultured in hPL medium. We found that Matrigel-coated dishes promoted hADSC differentiation into osteoblasts and suppressed differentiation into chondrocytes in 10% hPL medium. Recombinant vitronectin- and fibronectin-coated dishes greatly promoted hADSC differentiation into osteoblasts and chondrocytes in 5% and 10% hPL media. hPL promoted hADSC differentiation into osteoblasts and chondrocytes compared to FBS on the fibronectin-coated surface and recombinant vitronectin-coated surface.

Human Induced Pluripotent Stem Cells : Clinical Significance and Applications in Neurologic Diseases

The generation of human induced pluripotent stem cells (iPSCs) from somatic cells using gene transfer opens new areas for precision medicine with personalized cell therapy and encourages the discovery of essential platforms for targeted drug development. iPSCs retain the genome of the donor, may regenerate indefinitely, and undergo differentiation into virtually any cell type of interest using a range of published protocols. There has been enormous interest among researchers regarding the application of iPSC technology to regenerative medicine and human disease modeling, in particular, modeling of neurologic diseases using patient-specific iPSCs. For instance, Parkinson’s disease, Alzheimer’s disease, and spinal cord injuries may be treated with iPSC therapy or replacement tissues obtained from iPSCs. In this review, we discuss the work so far on generation and characterization of iPSCs and focus on recent advances in the use of human iPSCs in clinical setting.

Development of improved dual-diazonium reagents for faster crosslinking of tobacco mosaic virus to form hydrogels

New bench-stable reagents with two diazonium sites were designed and synthesized for protein crosslinking. Because of the faster diazonium-tyrosine coupling reaction, hydrogels from the crosslinking of tobacco mosaic virus and the reagent DDA-3 could be prepared within 1 min at room temperature. Furthermore, hydrogels with the introduction of disulfide bonds viaDDA-4 could be chemically degraded by dithiothreitol. Our results provided a facile approach for the direct construction of virus-based hydrogels.

Improved dual-diazonium reagents were developed for more efficient crosslinking of tobacco mosaic virus to form hydrogels.