Biosorption of hexavalent chromium onto raw and chemically modified Sargassum sp

Removal and concurrent reduction of Cr(VI) by thermoacidophilic Cyanidiales: a novel extreme biomaterial enlightened for acidic and neutral conditions

Thermoacidophilic Cyanidiales maintain a competitive edge in inhabiting extreme environments enriched with metals. Here, species of Cyanidioschyzon merolae (Cm), Cyanidium caldarium (Cc), and Galdieria partita (Gp) were exploited to remove hexavalent chromium [Cr(VI)]. Cm and Gp could remove 168.1 and 93.7 mg g^-1 of Cr(VI) at pH 2.0 and 7.0, respectively, wherein 89% and 62% of sorbed Cr on Cm and Gp occurred as trivalent chromium [Cr(III)]. Apart from surface-sorbed Cr(VI), the in vitro Cr(III) bound with polysaccharide and in vivo chromium(III) hydroxide [Cr(OH)₃] attested to the reduction capability of Cyanidiales. The distribution of Cr species varied as a function of sorbed Cr amount, yet a relatively consistent proportion of Cr(OH)₃, irrespective of Cr sorption capacity, was found only on Cm and Cc at pH 2.0. In conjunction with TXM (transmission X-ray microscopy) images that showed less impaired cell integrity and possible intracellular Cr distribution on Cm and Cc at pH 2.0, the in vivo Cr(OH)₃ might be the key to promoting the Cr sorption capacity (≥ 152 mg g^-1). Cyanidiales are promising candidates for the green and sustainable remediation of Cr(VI) due to their great removal capacity, the spontaneous reduction under oxic conditions, and in vivo accumulation.

Valorization of Sargassum Biomass as Potential Material for the Remediation of Heavy-Metals-Contaminated Waters

Sargassum algae has become a major environmental issue due to its abundance in the Pacific Ocean with hundreds of tons reaching the beaches of the Mexican Caribbean every year. This generates large quantities of decomposing organic matter that have a negative impact on the region's economy and ecosystems. Sargassum valorization has turned out to be a fundamental aspect to mitigate its environmental impact. This study proposes the use and application of untreated Sargassum biomass for the decontamination of waters polluted with lead (Pb) and cadmium (Cd) through single and binary adsorption tests. Physicochemical and textural properties examined by SEM, XRD, and FT-IR elucidated that Sargassum biomass is viable to be used as a potential environmental benign adsorbent, exhibiting Cd(II) and Pb(II) adsorption capacities as high as 240 mg g-1 and 350 mg g-1, respectively, outperforming conventionally used adsorbents. This is attributed to its morphology, favorable surface charge distribution, and the presence of -OH and -COH groups. A strong affinity between the biomass and metal pollutants was evidenced by a thermodynamics study, showing a spontaneous and endothermic process. This work sets a practical route for the utilization of the Sargassum biomass, demonstrating its applicability as a potential material for heavy-metal-polluted water remediation, making a substantial contribution to a circular economy system.

Biosorption of hexavalent chromium from aqueous solution by pristine and CaCl2-modified erythromycin production residues

In this study, the adsorptive removal of hexavalent chromium [Cr(VI)] from aqueous solutions by the pristine and salt-treated (CaCl₂) erythromycin production residue (EPRs and SEPRs) were investigated. Batch experiments were carried out to determine the effect of contact time, sorbent dosage, pH, initial Cr concentration, and temperature on Cr(VI) sorption by EPRs and SEPRs. The highest adsorptive removal capacities were achieved at the pH equal to 1.0, and the maximum adsorption capacities for EPRs and SEPRs at optimized conditions were 21.74 and 35.24 mg g^-1, respectively. The FTIR spectra and SEM studies were examined for the pristine adsorbent and after the adsorption of Cr(VI). Moreover, thermodynamic results indicated that Cr sorption by EPR/SERPs was feasible, spontaneous, and endothermic under the optimum conditions. Langmuir model fitted well with the experimental data. Kinetic modeling revealed that the biosorption of Cr(VI) by EPRs and SEPRs obeyed the second-order model than the first-order model. The process involving rate-controlling step is much complex involving both boundary layer and intra-particle diffusion processes. Furthermore, the adsorption-coupled-reduction process was believed as the main mechanism of Cr(VI) removal by EPRs and SEPRs. In summary, both adsorbents could be considered as promising low-cost biosorbent for the removal of Cr(VI) from aqueous systems.

Potential use of Chlorella vulgaris KCBAL01 from a freshwater stream receiving treated textile effluent in hexavalent chromium [Cr(VI)] removal in extremely acidic conditions

Remediation of hexavalent chromium with conventional chemical and physical methods is a costly process, while replacing some critical steps in physiochemical remediation with self-sustaining bioremediation agents are expected to be cost-effective and environmentally friendly implementation. In this study, a microalga isolated from a freshwater stream receiving treated textile wastewater was identified up to its molecular level and investigated its ability to tolerate and remove hexavalent chromium from extremely acidic conditions under different temperatures. The ability of microalgae to tolerate and remove Cr(VI) was investigated by growing it in BG11 media with different pH (1, 2, 3 & 7), amended with several concentrations of Cr(VI) and incubated under different temperatures for 96 hrs. Microalga was identified as Chlorella vulgaris and found that the isolated strain has a higher hexavalent chromium removal potential in extremely acidic conditions than in neutral pH conditions at 25 °C. In contrast, its Cr(VI) removal potential is significantly influenced by the pH and temperature of the growth medium. Furthermore, it exhibited a permanent viability loss at extreme acidic conditions (pH 1 - 3) and prolonged exposure to the higher chromium content. The microalga investigated will be a highly useful bioagent in hexavalent chromium remediation in high acidic conditions.

Mitigating the Health Effects of Aqueous Cr(VI) with Iron-Modified Biochar

A large amount of chromium (Cr) has entered the natural environment from the wastewater and waste residues, and the hexavalent (Cr(VI)) is highly poisonous, threatening the ecological environment and human health directly. In this study, iron-modified biochar was prepared using honeysuckle residue as raw material and the ferric chloride impregnation method. Batch Cr(VI) adsorption experiments were carried out using the modified honeysuckle-derived biochar (MHDB) as an adsorbent. The results indicate that a pH of 2 was best for the adsorption removal of Cr(VI) in the initial pH range of 2–10. The adsorption kinetic data fitted the pseudo-second-order model best out of the two models, and the Langmuir model was better than the Freundlich model to describe the adsorption process. Thermodynamic analysis indicated that the adsorption process of Cr(VI) on MHDB had an endothermic and spontaneous nature, and the increasing temperature was conducive to the adsorption. The main mechanisms of Cr(VI) adsorption might be the physical adsorption (electrostatic interactions) and chemical adsorption (ion exchange, the reduction of Cr(VI) to Cr(III)). The efficient adsorption of Cr(VI) makes MHDB a potential material for Cr(VI)-containing wastewater treatment. This study provides a feasible adsorption material for mitigating the environmental hazards of chromium, which has a certain reference value for protecting environmental health.

Removal of Toxic Heavy Metals from Contaminated Aqueous Solutions Using Seaweeds: A Review

Heavy metal contamination affects lives with concomitant environmental pollution, and seaweed has emerged as a remedy with the ability to save the ecosystem, due to its eco-friendliness, affordability, availability, and effective metal ion removal rate. Heavy metals are intrinsic toxicants that are known to induce damage to multiple organs, especially when subjected to excess exposure. With respect to these growing concerns, this review presents the preferred sorption material among the many natural sorption materials. The use of seaweeds to treat contaminated solutions has demonstrated outstanding results when compared to other materials. The sorption of metal ions using dead seaweed biomass offers a comparative advantage over other natural sorption materials. This article summarizes the impact of heavy metals on the environment, and why dead seaweed biomass is regarded as the leading remediation material among the available materials. This article also showcases the biosorption mechanism of dead seaweed biomass and its effectiveness as a useful, cheap, and affordable bioremediation material.

Advancement of green technologies: A comprehensive review on the potential application of microalgae biomass

Microalgae have drawn significant interest worldwide, owing to their enormous application potential in the green energy, biopharmaceutical, and nutraceutical industries. Many studies have proved and stated the potential of microalgae in the area of biofuel which is economically effective and environmentally friendly. Besides the commercial value, the potential of microalgae in environmental protection has also been investigated. Microalgae-based process is one of the most effective way to treat heavy metal pollution, compared to conventional methods, it does not release any toxic waste or harmful gases, and the aquatic organism will not receive any harmful effects. The potential dual role of microalge in phytoremedation and energy production has made it widely explored for its capability. The interest of microalgae in various application has motivated a new focus in green technologies. Considering the rapid population growth with the continuous increase on the global demand and the application of biomass in diverse field, significant upgrades have been performed to accommodate green technological advancement. In the past decade, noteworthy advancement has been made on the technology involving the diverse application of microalgae biomass. This review aims to explore on the application of microalgae and the development of green technology in various application for microalgae biomass. There is great prospects for researchers in this field to delve into other potential utilization of microalgae biomass not only for bioremediation process but also to generate revenues from microalgae by incorporating clean and green technology for long-term sustainability and environmental benefits.

Hexavalent chromium removal from water: adsorption properties of in natura and magnetic nanomodified sugarcane bagasse

Biosorption has become a viable and ecological process in which biological materials are employed as adsorbents for the removal of potentially toxic metals, such as hexavalent chromium, from aqueous matrices. This work proposed the use of in natura (SB) and nanomodified sugarcane bagasse (SB-NP) with ferromagnetic nanoparticles (Fe₃O₄) to adsorb Cr(VI) from water. These materials were analyzed by X-ray Spectroscopy (XRD), Scanning Electron Microscopy (SEM), and Fourier Transform Infrared Spectroscopy (FTIR) to investigate their morphology and interaction with Cr(VI). It was observed the efficient impregnation of magnetite on the SB surface and the presence of functional groups such as O-H, C-H, C=O, C-O-C, C-O, and Fe-O (characteristic of magnetite). The best conditions for Cr(VI) removal in aqueous medium were determined by assessing the pH at the point of zero charge (pH_PZC = 6.1 and 5.8 for SB and SB-NP, respectively), adsorption pH and kinetics, and adsorption capacity. Batch procedures were performed using increasing concentrations of Cr(VI), 10-100 mg/L at pH 1.0, and 30 min of contact time. The adsorbent dose was 10 mg/L, and the experimental adsorption capacities (SC_exp) for SB, NP, and SB-NP were 1.49 ± 0.06 mg/g, 2.48 ± 0.57 mg/g, and 1.60 ± 0.08 mg/g, respectively. All Cr contents were determined by flame atomic absorption spectrometry (FAAS). The pseudo-2nd-order kinetic equation provided the best adjustments with r² 0.9966 and 0.9931 for SB and SB-NP, respectively. Six isotherm models (Langmuir, Freundlich, Sips, Temkin, Dubinin-Radushkevich, and Hill) were applied to the experimental data, and Freundlich, Dubinin-Radushkevich (D-R), and Temkin were the models that best described the experimental sorption process. The binding energy values (E) provided by the D-R model were 0.11 ± 0.25, 0.09 ± 0.20, and 0.08 ± 0.25 kJ/mol, for NP, SB-NP, and SB, respectively, and denote a physical interaction for the studied adsorbate-adsorbent system. The nanomodification of the biomass slightly improved the efficiency for the sorption of Cr(VI) and facilitated the removal of Cr(VI)-containing biosorbents from water medium.

The Effect of Chromium on Photosynthesis and Lipid Accumulation in Two Chlorophyte Microalgae

Heavy metals have adverse effects on microalgae metabolism and growth. Photosynthesis and lipid profile are quite sensitive to heavy metal toxicity. The impact of hexavalent chromium—Cr(VI) on photosynthesis and lipid accumulation in Mucidosphaerium pulchellum and Micractinium pusillum exposed to different concentrations (0–500 μg L−1) was investigated for 11 days. A significant (p < 0.05) increase in lipid content was observed with increasing Cr(VI) concentration. However, growth was suppressed at higher concentrations exceeding 100 μg L−1. Addition of Cr(VI) in the cell culture medium showed a negative effect on quantum yield (Fv/Fm), and a photosynthetic inhibition of >65% was noted in both species at 500 μg L−1. However, the lipid gravimetric analysis presented inner cell lipid content up to 36% and 30% of dry weight biomass for M. pulchellum and M. pusillum, respectively. The fatty acids profiles of both microalgae species showed higher levels of hexadecenoic acid as well as ω3, ω6, and ω7 fatty acids. The effect of Cr(VI) on photosynthesis and lipid accumulation in both microalgae species was concentration and exposure time dependent. This shows that an appropriate concentration of Cr(VI) in culture medium could be beneficial for higher lipid accumulation in freshwater eukaryotic microalgae species.

Biomanagement of hexavalent chromium: Current trends and promising perspectives

Chromium (Cr) is most widely used heavy metal with vast applications in industrial sectors such as metallurgy, automobile, leather, electroplating, etc. Subsequently, these industries discharge large volumes of toxic Cr containing industrial wastewaters without proper treatment/management into the environment, causing severe damage to human health and ecology. This review gives some novel insights on the existing, successful and promising bio-based approaches for Cr remediation. In lieu of the multiple limitations of the physical and chemical methods for remediation, various biological means have been deciphered, wherein dead and live biomass have shown immense capabilities of removing/reducing and/or remediating Cr from polluted environmental niches. Adsorption of Cr by various agro-based waste and reduction/precipitation by different microbial groups have shown promising results in chromium removal/recovery. Various microbial based agents and aquatic plants like duckweeds are emerging as efficient adsorbents of metals and their role in chromium bioremediation is an effective green technology that needs to be harnessed effectively. The role of iron and sulphur reducing bacteria have shown potential for enhanced Cr remediation. Biosurfactants have revealed immense scope as enhancers of microbial metal bioremediation and have been reported to have potential for use in chromium recovery as well. The authors also explore the combined use of biochar and biosurfactants as a potential strategy for chromium bioremediation for the development of technology worth adopting. Cr is non-renewable and finite resource, therefore its safe removal/recovery from wastes is of major significance for achieving social, economic and environmental sustainability.

Biosorption of cyanate by two strains of Chlamydomonas reinhardtii: evaluation of the removal efficiency and antioxidants activity

Two strains of the chlorophyte Chlamydomonas reinhardtii, a wild type (WT) and a transgenic strain (C.CYN) contained an exogenous cyanase gene (CYN), were used to investigate the growth and cyanate biosorption capability through the analysis of the adsorption equilibrium isotherm. The potential antioxidants activity of the algal strains was also investigated under cyanate concentration. The antioxidants activity of both C.CYN and WT were enhanced by the application of cyanate.Two adsorption isotherm models and the sorption kinetics were used to check the efficiency of the cyanate removal process. The results showed the biosorbent efficiency of Chlamydomonas in the removal of KCNO from aqueous solution. The C.CYN strain has great efficiency to remove cyanate as compared to the WT. The maximum percentage of cyanate removal was 83.75% for the C.CYN and 50% for the WT as treated with 0.8 mg.ml^-1 KCNO. The data were adapted to the nonlinear Langmuir model on the basis of the coefficient of determination. The calculated q_max was 0.54 and 0.42 µg.mg^-1 for C.CYN and WT which correlated to the experimental one (0.67 and 0.4 µg.mg^-1, respectively). Our data highlight the application of the transgenic algal strain toward the removal of highly toxic materials as cyanate.Novelty statement The main objective of this work is to find out an efficient genetically-modified Chlamydomonas strain to remove the highly toxic cyanate compound from contaminated area. Moreover, to evaluate the biosorption ability of this transgenic strain with its wild one via two adsorption isotherm (the Langmuir and Freundlich) models. Also, to estimate the antioxidants activity of these strains under the cyanate toxicity through four different assays.

Magnetite Functionalized Nigella Sativa Seeds for the Uptake of Chromium(VI) and Lead(II) Ions from Synthetic Wastewater

The aim of the present study was to utilise pristine and magnetite-sucrose functionalized Nigella Sativa seeds as the adsorbents for the uptake of chromium(VI) and lead(II) ions from synthetic wastewater. Prestine Nigella Sativa seeds were labelled (PNS) and magnetite-sucrose functionalized Nigella Sativa seeds (FNS). The PNS and FNS composites were characterized by Fourier-transform infrared spectroscopy (FTIR) and X-ray powder diffraction (XRD). The FTIR analysis of both adsorbents revealed the presence of vibrations assigned to 1749 and 1739 cm-1 (-C=O) for ketonic group for both adsorbents. The amide (-NH) peak was observed at 1533 and 1527 cm-1 on FNS and PNS composites, respectively, whilst the carboxyl group (-COOH) were observed at 1408 cm-1 on both adsorbents. The XRD results of FNS and PNS composites showed a combination of spinel structure and$y$-Fe2O3 phase confirming the formation of iron oxide. The influence of operational conditions such as initial concentration, temperature, pH, and contact time was determined in batch adsorption system. The kinetic data of Cr(VI) and Pb(II) ions on both adsorbents was described by pseudo-first-order (PFO) model which suggested physisorption process. The sorption rate of Cr(VI) ions was quicker, it attained equilibrium in 20 min, and the rate of Pb(II) ions was slow in 90 min. Freundlich isotherm described the mechanism of Pb(II) ions adsorption on PNS and FNS composites. Langmuir best fitted the uptake of Cr(VI) ions on PNS and FNS. The results for both adsorbents showed that the removal uptake of Pb(II) ions increased when the initial concentration was increased; however, Cr(VI) uptake decreased when the initial concentration increased. The adsorption of Cr(VI) and Pb(II) ions on both adsorbents increased with temperature.

Behavior and Mechanism of Cesium Biosorption from Aqueous Solution by Living Synechococcus PCC7002

Many efforts have focused on the adsorption of metals from contaminated water by microbes. Synechococcus PCC7002, a major marine cyanobacteria, is widely applied to remove metals from the ocean's photic zone. However, its ability to adsorb cesium (Cs) nuclides has received little attention. In this study, the biosorption behavior of Cs(I) from ultrapure distilled water by living Synechococcus PCC7002 was investigated based on kinetic and isotherm studies, and the biosorption mechanism was characterized by Fourier-transform infrared spectroscopy, Raman&nbsp;spectroscopy, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectrometry, and three-dimensional excitation emission matrix fluorescence spectroscopy. Synechococcus PCC7002 showed extremely high tolerance to Cs ions and its minimal inhibitory concentration was 8.6 g/L. Extracellular polymeric substances (EPS) in Synechococcus PCC7002 played a vital role in this tolerance. The biosorption of Cs by Synechococcus PCC7002 conformed to a Freundlich-type isotherm model and pseudo-second-order kinetics. The binding of Cs(I) was primarily attributed to the extracellular proteins in EPS, with the amino, hydroxyl, and phosphate groups on the cell walls contributing to Cs adsorption. The biosorption of Cs involved two mechanisms: Passive adsorption on the cell surface at low Cs concentrations and active intracellular adsorption at high Cs concentrations. The results demonstrate that the behavior and mechanism of Cs adsorption by Synechococcus PCC7002 differ based on the Cs ions concentration.

Kinetic and thermodynamic studies on biosorption of Cr(VI) on raw and chemically modified Datura stramonium fruit

Biosorption of Cr(VI) on sulfuric and phosphoric acid-treated Datura stramonium fruit was investigated in batch mode. The various parameters that influence the biosorption process such as Cr(VI) initial concentration, biosorbent dosage, contact time, temperature, and pH value were optimized. Both linear and non-linear regression analysis of isotherm data suggest that Langmuir isotherm model mimics the behavior of Cr(VI) ion biosorption onto Datura stramonium fruit biosorbent. The maximum Cr(VI) ions adsorption capacity of 138.074 mg/g at pH 2 is achieved with phosphoric acid treated Datura stramonium (PDSF). The kinetics of adsorption process is well described by pseudo-second-order model with high R² and low χ² value. The estimated activation energy of < 8 kJ/mol obtained for both raw and chemically modified adsorbents suggests that the adsorption occurs mainly via physisorption. Besides, thermodynamic results reveal that biosorption of Cr(VI) on both treated and untreated Datura stramonium was endothermic, spontaneous, and randomness in nature.

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

Application of algae for heavy metal adsorption: A 20-year meta-analysis

The use of algae to adsorb heavy metals is an efficient and environmentally friendly treatment for contaminated water and has attracted widespread research attention. In this study, a meta-analysis of the heavy metal adsorption capacity of algae from five different phyla and the factors influencing these capacities was conducted. Phaeophyta was found to have a high heavy metal adsorption capacity, whereas Bacillariophyta had a relatively low adsorption capacity; Chlorophyta, Rhodophyta, and Cyanophyta had moderate adsorption capacities. Non-living algae were more effective in practical applications than living algae were. Algal biomass had a relatively high adsorption efficiency of 1-10 g/L, which did not increase significantly when algal concentration increased. The algal adsorption efficiency for initial heavy metal concentrations of 10-100 mg/L was higher than for concentrations of greater than 100 mg/L. The results further show that algal adsorption of heavy metals reached a maximum capacity of 80-90% within 20 min. Heavy metal adsorption by algae was not temperature-dependent, and it was more effective in moderately to weakly acidic environments (pH = 4-7.5). Considering these aspects for practical applications, algae from some phyla can effectively be used for heavy metal biosorption in contaminated water.

New Prospects for Modified Algae in Heavy Metal Adsorption

Heavy metal pollution is one of the most pervasive environmental problems globally. Novel finely tuned algae have been proposed as a means to improve the efficacy and selectivity of heavy metal biosorption. This article reviews current research on selective algal heavy metal adsorption and critically discusses the performance of novel biosorbents. We emphasize emerging state-of-the-art techniques that customize algae for enhanced performance and selectivity, particularly molecular and chemical extraction techniques as well as nanoparticle (NP) synthesis approaches. The mechanisms and processes for developing novel algal biosorbents are also presented. Finally, we discuss the applications, challenges, and future prospects for modified algae in heavy metal biosorption.

The critical utilization of active heterotrophic microalgae for bioremoval of Cr(VI) in organics co-contaminated wastewater

Considering the importance of removing toxic Cr(VI) from practical wastewater containing complex pollutants, this study presented for the first time the utilization of the live heterotrophic microalgae (Botryocossuss sp. NJD-1) to achieve a concurrent abatement of Cr(VI), TOC, NO₃-N and PO₄-P, through a comprehensive biochemical process. The experimental results showed that the Cr(VI) removal efficiencies in the culture with different types of organic descended in the order of sodium acetate, ethanol and methanol. The highest removal efficiencies were achieved as 94.2%, 98.2%, 66.9% and 99.2% for Cr(VI), TOC, NO₃-N and PO₄-P, respectively, in the culture with 5 mg L^-1 Cr(VI) and sodium acetate of equivalent to 2.92 g C L^-1. Through mass balance calculation and characterization, the fate of Cr(VI) and Cr(III) was tracked and quantified in the culture system, which indicates that 87.17% of initial Cr(VI) were reduced to Cr(III) and then adsorbed in algal biomass for the optimal removal case. Consequently, the mechanism demonstrating the correlation among the removal process of Cr(VI), the biological activity of microalgae and the effect of organic compounds was proposed.

Adsorptive removal of polycyclic aromatic hydrocarbons by detritus of green tide algae deposited in coastal sediment

Rare information is available on the adsorptive removal of polycyclic aromatic hydrocarbons (PAHs) in the presence of algal detritus deposited in the coastal sediment during the outbreak of the green tide. The adsorptive removal of typical PAHs by Ulva prolifera (U. prolifera) detritus was firstly investigated since the algal detritus was of great importance for the biogeochemical cycle of coastal contaminants. The results showed that equilibrium adsorptive capacities of naphthalene, phenanthrene and benzo[a] pyrene on the U. prolifera detritus were 1.27, 1.97, and 2.49 mg kg^-1, respectively, at the initial concentration of 10 μg L^-1. The in situ monitoring using laser confocal scanning microscopy confirmed the adsorptive removal of PAHs by U. prolifera detritus. The adsorption of these PAHs was highly pH-dependent. The increase in salinity led to the increase in naphthalene removal rate, while the salinity showed scarce influence on the removal of phenanthrene and benzo[a] pyrene. There was a good linear relationship (R² ≥ 0.9892) between the removal efficiency of PAHs and the initial concentration of PAHs. Slow desorption kinetics and low desorption rate (<16%) indicated that the adsorptive removal of PAHs could be benign to the environment. These findings demonstrated that the occurrence of green tide could provide a new natural remediation approach for contamination of PAHs through the adsorptive removal by the detritus of green tidal algae deposited in the coastal sediment.

Thermodynamic and kinetic insights into plant-mediated detoxification of lead, cadmium, and chromium from aqueous solutions by chemically modified Salvia moorcroftiana leaves

Thermodynamic and kinetic aspects for the biosorptive removal of Pb, Cd, and Cr metals from water using Chemically Modified Leaves of Salvia moorcroftiana (CMSML) were determined. Different parameters including pH, temperature, metal's initial concentration, biomass dosage, and contact time were optimized. Optimum biosorptions of Pb, Cd, and Cr were attained at pH values of 6.0, 7.0, and 3.0 respectively. Batch experiments showed maximum removal of both Pb and Cd at 40 °C and that of Cr at 30 °C. Biosorption capability of CMSML was observed to decrease with raising temperature. Optimal equilibrium times for Pb, Cd, and Cr uptake were 120, 60, and 120 min respectively. Based on the values of regression correlation coefficients (R²), the current data is explained better by applying Langmuir isotherms than the Freundlich model. Maximum biosorbent capabilities (q_max) for Pb, Cd, and Cr were approximately 270.27, 100.00, and 93.45 mg/g respectively. Thermodynamically, removal of all the three metal ions was shown to be exothermic and spontaneous.

Effect of pH on hexavalent and total chromium removal from aqueous solutions by avocado shell using batch and continuous systems

Solution pH appears to be the most important regulator of the biosorptive removal of chromium ions from aqueous solutions. This work presents a kinetic study of the effects of solution pH on Cr(VI) and total chromium removal from aqueous solution by Hass avocado shell (HAS) in batch and continuous packed bed column systems. Different Cr(VI) and total chromium removal performances of HAS were obtained in pH-shift batch, pH-controlled batch, and continuous systems. These results emphasize the great importance of determining the most appropriate pH for Cr(VI) and total chromium removal, considering the operational mode of the proposed large-scale treatment system. Total chromium biosorption batch kinetics was well described by the Elovich model, whereas in the continuous system, the fitness of the kinetic models to the experimental data was pH dependent. X-ray photoelectron spectroscopy and kinetic studies clearly indicated that the reaction mechanism of Cr(VI) with HAS was the reductive biotransformation of Cr(VI) to Cr(III), which was partially released to the aqueous solution and partially biosorbed onto HAS.

Recent advances on biosorption by aerobic granular sludge

Aerobic granular sludge is a form of microbial auto-aggregation, and a promising biotechnology for wastewater treatment. This review aims at providing the first comprehensive, systematic, and in-depth overview on the application of aerobic granules as biosorbents. The target pollutants encompass heavy metals (both cationic and oxyanionic), nuclides, dyes, and inorganic non-metal substances. Different granule types are discussed, i.e. intact and fragmented, compact and fluffy, original and modified, and the effects of granule surface modification are introduced. A detailed comparison is conducted on the characteristics of granular biomass, the conditions of the adsorption tests, and the resultant performance towards various sorbates. Analytical and mathematical tools typically employed are presented, and possible interactions between the pollutants and granules are theorized, leading to an analysis on the mechanisms of the adsorption processes. Original granules appear highly effective towards cationic metals, while surface modification by organic and inorganic agents can expand their applicability to other pollutants. Combined with their advantages of high mechanical strength, density, and settling speed, aerobic granules possess exceptional potential in real wastewater treatment as biosorbents. Possible future research, both fundamental and practical, is suggested to gain more insights into the mechanism of their function, and to advance their industrial application.

A Novel Early Warning System Based on a Sediment Microbial Fuel Cell for In Situ and Real Time Hexavalent Chromium Detection in Industrial Wastewater

Hexavalent chromium (Cr(VI)) is a well-known toxic heavy metal in industrial wastewater, but in situ and real time monitoring cannot be achieved by current methods used during industrial wastewater treatment processes. In this study, a Sediment Microbial Fuel Cell (SMFC) was used as a biosensor for in situ real-time monitoring of Cr(VI), which was the organic substrate is oxidized in the anode and Cr(VI) is reduced at the cathode simultaneously. The pH 6.4 and temperature 25 °C were optimal conditions for the operation. Under the optimal conditions, linearity (R² = 0.9935) of the generated voltage was observed in the Cr(VI) concentration range from 0.2 to 0.7 mg/L. The system showed high specificity for Cr(VI), as other co-existing ions such as Cu²⁺, Zn²⁺, and Pb²⁺ did not interfere with Cr(VI) detection. In addition, when the sediment MFC-based biosensor was applied for measuring Cr(VI) in actual wastewater samples, a low deviation (<8%) was obtained, which indicated its potential as a reliable biosensor device. MiSeq sequencing results showed that electrochemically active bacteria (Geobacter and Pseudomonas) were enriched at least two-fold on the biofilm of the anode in the biosensor as compared to the SMFC without Cr(VI). Cyclic voltammetry curves indicated that a pair of oxidation/reduction peaks appeared at −111 mV and 581 mV, respectively. These results demonstrated that the proposed sediment microbial fuel cell-based biosensor can be applied as an early warning device for real time in situ detection of Cr(VI) in industrial wastewaters.

Single, simultaneous and consecutive biosorption of Cr(VI) and Orange II onto chemically modified masau stones

Novel and low cost chemically modified masau stone (CMMS) was investigated for its biosorption of an anionic azo dye, Orange II (OII), and toxic hexavalent chromium (Cr(VI)) from aqueous systems: individually, simultaneously and consecutively. XPS and FTIR analyses indicated the introduction of quaternary-Nitrogen to the CMMS surface after activation with epichlorohydrin (etherifying agent) and diethylenetriamine (crosslinking agent). The effects of pH, contact time and initial concentration (C_o), and loading order on mechanisms of biosorption/reduction of OII and Cr(VI) onto CMMS were examined in detail. Several analytical techniques were employed to characterise the physio-chemical properties of the CMMS and determine the biosorption mechanisms. The pseudo second order and redox models were able to adequately predict the kinetics of biosorption. The Langmuir maximum OII biosorption capacity (q_max) was calculated as 136.8 mg/g for the dye onto the Cr(VI)-loaded CMMS consecutive system at C_o = 100 mg/dm³. The q_max for the Cr(VI) system was found to be 87.32 mg/g at the same C_o max. This reveals that the biosorption of OII and Cr(VI) mainly takes place via two different mechanisms i.e. hydrogen bonding and electrostatic attraction for the dye, and biosorption-coupled reduction for Cr(VI).

Nanoscale zero-valent iron functionalized Posidonia oceanica marine biomass for heavy metal removal from water

Because of the excellent reducing capacity of nanoscale zero-valent iron (NZVI), it can be used as alternative materials for the removal of a variety of reducible water contaminants including toxic metals. The current paper reports the research results obtained for self-prepared biosorbent, Posidonia oceanica biomass, activated in alkaline medium and functionalized with NZVI particles. The structural characteristics, surface morphology, and binding properties of the resulting nanobiosorbent are presented. Batch comparative adsorption trials including adsorption kinetics and isothermals onto raw Posidonia, Posidonia-OH and Posidonia-OH-NZVI were investigated on three heavy metal ions: Cd(II), Pb(II), and Cu(II). The nanobiosorbent showed better properties, such as high reactivity and high uptake rate through the sorption process. The toxic metal removal has been monitored in terms of pseudo-first- and pseudo-second-order kinetics, and both Langmuir- and Freundlich-type isotherm models have been used to describe the sorption mechanism. The experimental data of all studied systems showed that the uptake kinetics follow the pseudo-second-order kinetic model and the equilibrium uptake can adopt the Langmuir-type isotherm model which assumes a monolayer coverage as the adsorption saturates and no further adsorption occurs. The thermodynamic results confirm that all sorption processes were feasible, spontaneous and thermodynamically favorable. Zeta potential data displayed that Cd(II), Pb(II), and Cu(II) tend to be reduced after exposure on the Posidonia-OH-NZVI surface. Furthermore, sorption competitions of the metals from binary and ternary systems were carried out onto Posidonia-OH-NZVI in order to gain further insight into the sorption efficiency of this material. Therefore, as a result, the proposed new nanobiosorbent could offer potential benefits in remediation of heavy metal-contaminated water as a green and environmentally friendly bionanocomposite.

Depletion of Cr(VI) from aqueous solution by heat dried biomass of a newly isolated fungus Arthrinium malaysianum: A mechanistic approach

For the first time, the heat dried biomass of a newly isolated fungus Arthrinium malaysianum was studied for the toxic Cr(VI) adsorption, involving more than one mechanism like physisorption, chemisorption, oxidation-reduction and chelation. The process was best explained by the pseudo-second order kinetic model and Redlich-Peterson isotherm with maximum predicted biosorption capacity (Q_m) of 100.69 mg g⁻¹. Film-diffusion was the rate-controlling step and the adsorption was spontaneous, endothermic and entropy-driven. The mode of interactions between Cr(VI) ions and fungal biomass were investigated by several methods [Fourier Transform-Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD) and Energy-Dispersive X-ray spectroscopy (EDX)]. X-ray Photoelectron Spectroscopy (XPS) studies confirmed significant reduction of Cr(VI) into non-toxic Cr(III) species. Further, a modified methodology of Atomic Force Microscopy was successfully attempted to visualize the mycelial ultra-structure change after chromium adsorption. The influence of pH, biomass dose and contact time on Cr(VI) depletion were evaluated by Response Surface Model (RSM). FESEM-EDX analysis also exhibited arsenic (As) and lead (Pb) peaks on fungus surface upon treating with synthetic solutions of NaAsO₂ and Pb(NO₃)₂ respectively. Additionally, the biomass could also remove chromium from industrial effluents, suggesting the fungal biomass as a promising adsorbent for toxic metals removal.

Macadamia nutshells-derived activated carbon and attapulgite clay combination for synergistic removal of Cr(VI) and Cr(III)

A physical mixture of Macadamia-derived activated carbon and cationic attapulgite clay was investigated for total chromium removal in aqueous solution. The parameters influencing the adsorption of chromium on the sorbents were investigated, and it was shown that pH 3, contact time 2 hours, concentration 50 mg L−1 and calculated adsorption capacity of 96.28 mg g−1 were the optimal parameters. The process of adsorption was better described by Freundlich adsorption isotherm, and the kinetic modelling data suggested a chemisorption mechanism described by pseudo-second-order (PSO) rate model. Ionic strength studies demonstrated that the removal of anionic Cr(VI) species was mostly affected by the presence of anions like Cl− and [Formula: see text], while the removal of the cationic Cr(III) species was affected largely by cations [Formula: see text]>Na+>K+. Overall, the removal mechanism involved adsorption, reduction and ion exchange processes.

Potential of Salvinia auriculata biomass as biosorbent of the Cr(III): directed chemical treatment, modeling and sorption mechanism study

In this work, the mechanism of the Cr(III) sorption by Salvinia auriculata biosorbent was studied in two stages. To understand the influence of the sorption parameters on the Cr(III) uptake, preliminary tests were performed. First, S. auriculata biomass was separately treated with base and acid solutions. Second, acid and base treatment of samples was performed based on the knowledge data base of our group. It was achieved a higher Cr(III) sorption capacity above 15 mg g-1 as associated to an increase of the micro-pores specific area and biosorbent volume. The obtained kinetic data of raw and treated biosorbents were well described by the intra-particle diffusion model. In this model, Cr(III) adsorption onto treated biomass is progressively improved with appearing of different mass transfer zones from out layer up to micro-porous layers. The equilibrium data of raw biomass were best described by the Langmuir isotherm, whereas the equilibrium data of the treated biomass were best fit by a combination of both Langmuir and Dubinin-Radushkevich isotherms. At low concentrations the adsorption most likely occurred on the outer monolayer, as proposed by the Langmuir model, followed by the adsorption on the micro-porous layers, as validated by the Dubinin-Radushkevich isotherm.

Two-stage phyto-microremediation of tannery effluent by Spirodela polyrrhiza (L.) Schleid. and chromium resistant bacteria

Two-stage sequential treatment of tannery effluent was conducted employing a wetland plant, Spirodela polyrrhiza (L.) Schleid., and chromium (Cr) resistant bacterial strains. The bacterial strains were isolated from Cr-enriched environmental matrices and rhizosphere of Spirodela polyrrhiza. The phyto-rhizoremediation of tannery effluent by Spirodela and its rhizospheric bacteria (Cellulomonas biazotea APBR1-6, Bacillus safensis APBR2-12, Staphylococcus warneri APBR3-5, Microbacterium oleivorans APBR2-6), followed by microremediation by Cr resistant bacteria (Micrococcus luteus APBS5-1, Bacillus pumilus APBS5-2, Bacillus flexus APBE3-1, Virgibacillus sediminis APBS6-1) resulted in reduction of pollution parameters [COD (81.2%), total Cr (97.3%), Cr(VI) (99.3%), Pb(II) (97.0%), Ni (95.7%)]. The LC-MS analysis showed that many pollutants detected in untreated tannery effluent were diminished after bioremediation or long chains of alcohol polyethoxylates viz. C18EO6 in untreated effluent were broken down into smaller unit of alcohol polyethoxylate ((+)HHO[CH2CH2O]H), indicating that bacteria and Spirodela polyrrhiza, alongwith its rhizospheric associates utilized them as carbon and energy source.

Surface Modification of Naturally Available Biomass for Enhancement of Heavy Metal Removal Efficiency, Upscaling Prospects, and Management Aspects of Spent Biosorbents: A Review

Heavy metal pollution in water emerges as a severe socio-environmental problem originating primarily from the discharge of industrial wastewater. In view of the toxic, non-biodegradable, and persistent nature of most of the heavy metal ions, remediation of such components becomes an absolute necessity. Biosorption is an emerging tool for bioremediation that has gained momentum for employing low-cost biological materials with effective metal binding capacities. Even though biological materials possess excellent metal adsorption abilities, they show poor mechanical strength and low rigidity. Other disadvantages include solid-liquid separation problems, possible biomass swelling, lower efficiency for regeneration or reuse, and frequent development of high pressure drop in the column mode that limits its applications under real conditions. To improve the biosorption efficiency, biomasses need to be modified with a simple technique for selective/multi-metal adsorption. This review is intended to cover discussion on biomass modification for enhanced biosorption efficiency, mechanism studies using various instrumental/analytical techniques, and future direction for research and development including the fate of spent biosorbent. In most of the previously published researches, difficulty of the process in scaling up has not been addressed. The current article outlines the application potential of biosorbents in the development of hybrid technology integrated with membrane processes for water and wastewater treatment in industrial scale.

Differential effect of biochar upon reduction-induced mobility and bioavailability of arsenate and chromate

Heavy metals such as chromium (Cr) and arsenic (As) occur in ionic form in soil, with chromate [Cr(VI)] and arsenate As(V) being the most pre-dominant forms. The application of biochar to Cr(VI) and As(V) spiked and field contaminated soils was evaluated on the reduction processes [(Cr(VI) to Cr(III)] and [As(V) to As(III))], and subsequent mobility and bioavailability of both As(V) and Cr(VI). The assays used in this study included leaching, soil microbial activity and XPS techniques. The reduction rate of As(V) was lower than that of Cr(VI) with and without biochar addition, however, supplementation with biochar enhanced the reduction process of As(V). Leaching experiments indicated Cr(VI) was more mobile than As(V). Addition of biochar reversed the effect by reducing the mobility of Cr and increasing that of As. The presence of Cr and As in both spiked and contaminated soils reduced microbial activity, but with the addition of biochar to these soils, the microbial activity increased in the Cr(VI) contaminated soils, while it was further decreased with As(V) contaminated soils. The addition of biochar was effective in mitigating Cr toxicity by reducing Cr(VI) to Cr(III). In contrast, the conversion process of As(V) to As(III) hastened by biochar was not favourable, as As(III) is more toxic in soils. Overall, the presence of functional groups on biochar promotes reduction by providing the electrons required for reduction processes to occur as determined by XPS data.

Insights into mechanisms of hexavalent chromium removal from aqueous solution by using rice husk pretreated using hydrothermal carbonization technology

Hydrothermal carbonization technique enhanced the adsorption capacity of rice husk towards Cr(vi).

Chromium Biosorption from Cr(VI) Aqueous Solutions by Cupressus lusitanica Bark: Kinetics, Equilibrium and Thermodynamic Studies

The present study investigated the kinetics, equilibrium and thermodynamics of chromium (Cr) ion biosorption from Cr(VI) aqueous solutions by Cupressus lusitanica bark (CLB). CLB total Cr biosorption capacity strongly depended on operating variables such as initial Cr(VI) concentration and contact time: as these variables rose, total Cr biosorption capacity increased significantly. Total Cr biosorption rate also increased with rising solution temperature. The pseudo-second-order model described the total Cr biosorption kinetic data best. Langmuir´s model fitted the experimental equilibrium biosorption data of total Cr best and predicted a maximum total Cr biosorption capacity of 305.4 mg g(-1). Total Cr biosorption by CLB is an endothermic and non-spontaneous process as indicated by the thermodynamic parameters. Results from the present kinetic, equilibrium and thermodynamic studies suggest that CLB biosorbs Cr ions from Cr(VI) aqueous solutions predominantly by a chemical sorption phenomenon. Low cost, availability, renewable nature, and effective total Cr biosorption make CLB a highly attractive and efficient method to remediate Cr(VI)-contaminated water and wastewater.

Concomitant reduction and immobilization of chromium in relation to its bioavailability in soils

In this study, two carbon materials [chicken manure biochar (CMB) and black carbon (BC)] were investigated for their effects on the reduction of hexavalent chromium [Cr(VI)] in two spiked [600 mg Cr(VI) kg(-1)] and one tannery waste contaminated [454 mg Cr(VI) kg(-1)] soils. In spiked soils, both the rate and the maximum extent of reduction of Cr(VI) to trivalent Cr [Cr(III)] were higher in the sandy loam than clay soil, which is attributed to the difference in the extent of Cr(VI) adsorption between the soils. The highest rate of Cr(VI) reduction was observed in BC-amended sandy loam soil, where it reduced 452 mg kg(-1) of Cr(VI), followed by clay soil (427 mg kg(-1)) and tannery soil (345 mg kg(-1)). X-ray photoelectron microscopy confirmed the presence of both Cr(VI) and Cr(III) species in BC within 24 h of addition of Cr(VI), which proved its high reduction capacity. The resultant Cr(III) species either adsorbs or precipitates in BC and CMB. The addition of carbon materials to the tannery soil was also effective in decreasing the phytotoxicity of Cr(VI) in mustard (Brassica juncea L.) plants. Therefore, it is concluded that the addition of carbon materials enhanced the reduction of Cr(VI) and the subsequent immobilization of Cr(III) in soils.