Transformation pathway of Remazol Brilliant Blue R by immobilised laccase

Identification of novel laccase from cyanobacterium Microcystis flos-aquae and enhanced azo dye bioremediation potential

Textile industries discharge up to 280,000 tons of dye waste annually, resulting in global pollution and health risks. In Nigeria and other African countries, persistent dyes threaten aquatic life and human health. This study introduces a cost-effective, enzyme-mediated bioremediation alternative using a novel laccase from the cyanobacteriumMicrocystis flos-aquae. This purified enzyme yielded 0.55 % (w/w)with significant activity at 40 °C and pH 4.00. Kinetic studies showed the dependence of M. flos-aquae laccase on Cu2+and its inhibition by EDTA and Fe2+. The efficacy of the enzyme was demonstrated through rapid decolorization of the azo dye Cibacron Brilliant Blue over a wide temperature and pH range. As this enzyme effectively decolorizes dyes across a broad temperature and pH range, it offers a promising solution for bioremediation of textile effluents.

Enzymatic dual-faced Janus structures based on the hierarchical organic-inorganic hybrid matrix for an effective bioremoval and detoxification of reactive blue-19

A novel, dual-faced, and hierarchical type of Janus hybrid structures (JHSs) was assembled through an in situ growing of lipase@cobalt phosphate sheets on the laccase@copper phosphate sponge-like structures. The chemical and structural information of prepared JHSs was investigated by Scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray diffraction analysis (XRD). The catalytic activity, storage stability, and reusability of JHSs were then investigated. The SEM-EDX analysis clearly confirmed the asymmetric morphology of the fabricated JHSs with two distinct metal distributions. Under optimized synthesis conditions, the prepared JHSs showed 97.8 % and 100 % of laccase and lipase activity, respectively. Compared to the free biocatalysts, the immobilization resulted in ~ a 2-fold increase in laccase and lipase stability at temperatures of >40 °C. The fabricated JHSs maintained 61 % and 90 % of their original laccase and lipase activity upon 12 successive repetition cycles. Up to 80 % of Reactive Blue-19 (RB-19), an anthraquinone-based vinyl sulphone dye, was removed after 5 h treatment with the prepared JHSs (50 % higher than the free forms of laccase and lipase). The dye removal data fitted very well on the pseudo-second-order kinetic model with a rate constant of 0.8 g mg-1 h-1. Following the bioremoval process, bacterial toxicity also decreased by about 70 %. Therefore, the prepared JHSs provide a facile and sustainable approach for the decolorization, biotransformation, and detoxification of RB-19 by integrating enzymatic oxidation and hydrolysis.

Anaerobic biotransformation of sulfonated anthraquinones by Pseudomonas nitroreducens WA and the fate of the sulfonic acid group in the presence of nitrate

The presence of the sulfonic acid group in sulfonated anthraquinones (SAs) resulted in the difficulty in the mineralization of anthraquinone ring. Little information is available on the removal pathway of the sulfonic acid group of SAs under aerobic/anaerobic conditions. Herein, sodium 1-aminoanthraquinone-2-sulfonate (ASA-2) was used as an important intermediate of SAs. A novel Pseudomonas nitroreducens WA capable of ASA-2 desulfonation was isolated from the Reactive Blue 19-degrading consortium WRB. Anaerobic desulfonation efficiency of 0.165 mM ASA-2 by strain WA reached 99% in 36 h at pH 7.5 and 35 ℃ using glucose as an electron donor. Further analysis showed that ASA-2 as an electron acceptor could be anaerobically transformed into 1-aminoanthraquinone and sulfite via the cleavage of C-S bond. Strain WA could also desulfonate sodium 1-amino-4-bromoanthraquinone-2-sulfonate and sodium anthraquinone-2-sulfonate. Under denitrification conditions, the formed sulfite could be oxidized to sulfate by nitrite via a chemical reaction, which was beneficial for nitrite removal. This phenomenon was observed in consortium WRB-amended system. Moreover, the consortium WRB could reduce the formed sulfite to sulfide due to the presence of Desulfovibrio. These results provide a theoretical basis for the anaerobic biodesulfonation of SAs along with nitrate removal and support for the development of sulfite-based biotechnology.

Sorghum-grown fungal biocatalysts for synthetic dye degradation

The synthetic dye discharge is responsible for nearly one-fifth of the total water pollution from textile industry, which poses both environmental and public health risks. Herein, a solid substrate inoculated with fungi is proposed as an effective and environmentally friendly approach for catalyzing organic dye degradation. Pleurotus ostreatus was inoculated onto commercially available solid substrates such as sorghum, bran, and husk. Among these, P. ostreatus grown on sorghum (PO-SORG) produced the highest enzyme activity and was further tested for its dye biodegradation ability. Four dye compounds, Reactive Blue 19 (RB-19), Indigo Carmine, Acid Orange 7, and Acid Red 1 were degraded by PO-SORG with removal efficiencies of 93%, 95%, 95%, and 78%, respectively. Under more industrially relevant conditions, PO-SORG successfully degraded dyes in synthetic wastewater and in samples collected from a local textile factory, which reveals its potential for practical usage. Various biotransformation intermediates and end-products were identified for each dye. PO-SORG exhibited high stability even under relatively extreme temperatures and pH conditions. Over 85% removal of RB-19 was achieved after three consecutive batch cycles, demonstrating reusability of this approach. Altogether, PO-SORG demonstrated outstanding reusability and sustainability and offers considerable potential for treating wastewater streams containing synthetic organic dyes.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Corn Cob as a Green Support for Laccase Immobilization-Application on Decolorization of Remazol Brilliant Blue R

The high demand for food and energy imposed by the increased life expectancy of the population has driven agricultural activity, which is reflected in the larger quantities of agro-industrial waste generated, and requires new forms of use. Brazil has the greatest biodiversity in the world, where corn is one of the main agricultural genres, and where over 40% of the waste generated is from cobs without an efficient destination. With the aim of the valorization of these residues, we proposed to study the immobilization of laccase from Aspergillus spp. (L_Asp) in residual corn cob and its application in the degradation of Remazol Brilliant Blue R (RBBR) dye. The highest yields in immobilized protein (75%) and residual activity (40%) were obtained at pH 7.0 and an enzyme concentration of 0.1 g.mL⁻¹, whose expressed enzyme activity was 1854 U.kg⁻¹. At a temperature of 60 °C, more than 90% of the initial activity present in the immobilized biocatalyst was maintained. The immobilized enzyme showed higher efficiency in the degradation (64%) of RBBR dye in 48 h, with improvement in the process in 72 h (75%). The new biocatalyst showed operational efficiency during three cycles, and a higher degradation rate than the free enzyme, making it a competitive biocatalyst and amenable to industrial applications.

Laccase Cross-Linked Ultraporous Aluminas for Sustainable Biodegradation of Remazol Brilliant Blue R

Over the past few decades, enzyme-based green and sustainable chemistry has attracted extensive research attention, which provides a promising alternative to the conventional treatment methods of recalcitrant micropollutants. However, enzyme denaturation and stability loss remain critical challenges for its potential applications in industrial wastewater treatment. In this study, laccase from Trametes versicolor (laccase T.) was cross-linked immobilized by ultraporous alumina (UPA) for the sustainable biodegradation of Remazol Brilliant Blue R (RBBR). Through sequential use of an aminosilane coupling agent (3-aminopropyl)triethoxysilane (APTES) and bifunctional cross-linker glutaraldehyde (GA), the synthesized biocatalysts showed better immobilization performances (about 4-fold to physical adsorption). The GA concentration considerably affected the laccase T. cross-linking degree, while the GA post-treatment protocol showed the highest laccase T. immobilization yield with lower activity recovery. Moreover, the biocatalyst stabilities including pH stability, thermal stability, storage stability, and reusability were also studied. Tolerance to broader pH and temperature ranges, better storage stability, good reusability of laccase T. cross-linked UPA(γ) biocatalysts, and their continuous RBRR biodegradation efficiency highlight the potentials of enzyme-based inorganic materials in industrial wastewater treatment, which can broaden our understanding of their practical applications in environmental fields.

Green bioprocess for degradation of synthetic dyes mixture using consortium of laccase-producing bacteria from Himalayan niches

Microbial remediation of synthetic dyes from industrial effluents offers a sustainable and eco-friendly alternative. Herein, laccase-producing bacteria were isolated from decaying wood niches in the Himalayan region. A bacterial consortium (BC-I) was developed to decolorize synthetic dyes cocktail of three major groups (azo, anthraquinone, and triphenylmethane). BC-I consisted of Klebsiella sp. PCH427, Enterobacter sp. PCH428, and Pseudomonas sp. PCH429 can decolorize 77% of 240 mg/L dyes cocktail in 44 h at 37 °C. BC-I works under wide pH (4.0-10.0), a high salt concentration (NaCl, 10%), and low nutrients. Further, FT-IR and LC-MS validated the dyes cocktail degradation and identified the degraded products. Additionally, phytotoxicity analysis of BC-I treated dyes cocktail significantly reduced the toxicity to Vigna radiata and Cicer arietinum compared to untreated dyes cocktail. The present study has simulated environmental challenges of acidic, alkaline, and saline industrial dyes effluents, which are significant to bioremediation.

Co-substrate-mediated utilization of high concentration of phenol by Aspergillus niger FP7 and reduction of its phytotoxicity on Vigna radiata L

Phenol and its derivatives behave as mutagens, teratogens and carcinogens inducing adverse physiological effects and are considered environmental hazards. The present study focuses on high concentration phenol utilization by Aspergillus niger FP7 under various physicochemical parameters. The soil remediation potential of the culture for reducing phenol toxicity against Vigna radiata L. seed germination was also evaluated along with the extent of phenol utilization using high-performance liquid chromatography. Aspergillus niger FP7 showed phenol tolerance up to 1000 mg/l, beyond which there was a sharp reduction in phenol utilization. Supplementation of the mineral salt medium with glucose and peptone and application of a 100 rpm agitation rate enhanced phenol utilization (up to 88.3%). Phenol utilization efficiency decreased (up to 29.6%) when cadmium and mercury salts were present, but the same improved (59.4-75.5%) by the incorporation of cobalt, copper and zinc salts. Vigna radiata L. seeds sown in the non-augmented soil revealed a 3.27% germination index, and with fungal augmentation, the germination index improved (97.3%). The non-augmented soil demonstrated 3.1% phenol utilization, while for the augmented soil, the utilization was 79.3%. Based on the phytotoxicity study and chromatographic analysis, it could be inferred that Aspergillus niger FP7 significantly enhanced phenol utilization in soil. In the future, Aspergillus niger FP7 could be of potential use in bioremediation of sites polluted with high concentrations of phenol.

Synergistic role of bacterial consortium to biodegrade toxic dyes containing wastewater and its simultaneous reuse as an added value

The current environmental research has fascinated the sustainable exploitation of mix bacterial consortium to biodegrade the environmentally-related toxic compounds, including hazardous synthetic dyes. Based on the existing literature evidence, textile and other industrial waste effluents pollute the natural water bodies. Textile effluent contains synthetic dyes which are liberated in the environment without proper treatment. The presence of toxic dyes added to the textile effluents undoubtedly affects the flora and fauna as that untreated water is used for irrigation by local farmers. Many conventional and biological methods are in action for the treatment of wastewater. Physical and chemical processes are expensive as compared to microbial treatments. The use of microbial consortia generates efficient results. Wastewater is a valuable resource, however, up to 80% of wastewater is released to different water matrices. This discernment needs to change for a better tomorrow. In this context, herein, we present a robust microbial-assisted treatment and simultaneously reuse of the treated wastewater as an added value to induce plant growth. Thus, the microbial approach for textile waste treatment release by-product after degradation should be non-toxic for the environment. In the present study, the toxicity of synthetic textile dye named Reactive Red 120, Reactive Orange 122, Reactive Yellow 160, and Reactive Blue 19 was investigated using a bioassay method with plant species namely Sorghum bicolor. Plate and Pot experiment was conducted with respect to untreated Azo dyes, degraded metabolites obtained from single bacteria, and consortium. Efficient Seed germination (89%), shoot length (12.4 cm), root length (15.6 cm) of the plants were observed for bacterial consortium degraded metabolites exposed seeds after comparing with the control. The degraded metabolite also increases protein (45.56 mg/g) and sugar (3.15 mg/g) contents. Bioremediation of various textile industrial effluents saves the ecosystem from the harmful effects of hazardous dyes. The biological decolorization of the textile azo dyes was investigated under co-metabolic conditions. The degraded metabolites can be used to enhance crop productivity and for commercial application. This mandates the current and future research to develop economically feasible and environmentally sustainable wastewater treatment practices.

Metal Exchange of ZIF-8 and ZIF-67 Nanoparticles with Fe(II) for Enhanced Photocatalytic Performance

Zeolitic imidazolate frameworks (ZIFs), such as ZIF-8 and ZIF-67, were found to be efficient catalysts. However, ZIFs are not used much in photocatalysis due to their low photocatalytic activity for most reactions. The photocatalytic activity can be improved by modifying the framework by exchanging the Zn(II) ions (ZIF-8) and Co(II) ions (ZIF-67) with a more photocatalytically active metal(II) ion to form an efficient bimetallic ZIF photocatalyst. Redox-active iron (Fe)-based materials are known to be highly potent photocatalysts. Thus, incorporating iron into ZIFs could significantly enhance their photocatalytic performance. In this study, we modified nanosized ZIF-8(Zn) and ZIF-67(Co) via metal (Fe²⁺) exchange to produce bimetallic frameworks that are photocatalytically more active than their parent ZIFs. Nanosized ZIF-8 and ZIF-67 were synthesized isothermally in either water or methanol under ambient conditions. From these, Fe-containing bimetallic ZIF-8 and ZIF-67 nanoparticles were synthesized via the metal exchange, and their performance on the photocatalytic degradation of dye was evaluated. The morphology and crystal structures of the pristine ZIF-8 and ZIF-67 nanoparticles were retained to a large extent during the iron exchange. Their Brunauer-Emmett-Teller (BET) surface areas decreased by less than 15% for nZIF-8 and less than 12% for nZIF-67. The binding energy values on X-ray photoelectron spectroscopy (XPS) confirmed the preservation of the oxidation state of Fe(II) during the exchange process. A remarkably higher catalytic activity was observed for the photocatalytic degradation of dye by the Fe-exchanged nZIF-8 and nZIF-67 compared to their parent ZIFs. This proved that the incorporation of Fe(II) centers into the ZIF framework enhanced the photocatalytic activity of the framework dramatically. In addition, these catalysts can be regenerated and reused without an appreciable loss in activity.

Transformation of Reactive Blue 19 by a recombinant peroxidase DyP

Wastewater containing recalcitrant dyes causes environmental problems. A new superfamily of heme-containing peroxidases, dye-decolorizing peroxidases (DyPs), has been found to decolorize different kinds of dyes, especial anthraquinone dyes efficiently. However, the mechanism of dyes degradation by DyPs has not been fully understood and the toxicity of dye degradation intermediates by DyPs catalysis to microbes is unclear. In this study, a purified recombinant Thermobifida fusca DyP (TfuDyP) in E. coli BL21(DE3) was used to treat Reactive Blue 19 (RB19), an anthraquinone dye. The reaction intermediates analyzed by ultra performance liquid chromatography/mass spectroscopy (UPLC-MS) indicated the initial site of TfuDyP attack on RB19. In addition, it was found that both RB19 and its incomplete degradation products inhibited the growth of Bacillus subtilis. These findings provided a novel understanding of DyPs catalysis to anthraquinone dyes.

Decolourisation of textile dye by laccase: Process evaluation and assessment of its degradation bioproducts

Biodegradation of environmentally hazardous synthetic dyes by enzymes has been achieved the highest interest in recent years. In this work, we optimized Remazol Brilliant Blue R (RBBR) dye biodegradation by Arthrographis kalrae derived laccase via the Box-Behnken design (BBD) approach of the surface response methodology (RSM). Optimization of dye decolourisation by one variable at a time (OVAT) approach resulted in optimal dye decolourisation at laccase dose (2 IU mL^-1), pH (7.0), temperature (35 °C), incubation time (240 min), and initial dye concentration (100 mg L^-1). The optimized process through BBD enhanced dye decolourisation (97.18%). Fourier Transform Infrared Spectroscopy and UV-Visible Spectrophotometry have proven biodegradation. In addition, in comparison to untreated samples, the laccase-treated dye sample showed relatively less phyto- and cytotoxic effect on Allium cepa L. Extra Precision Glide docking exhibited the binding affinity score of -5.355 kcal mol^-1, between laccase-RBBR complex.

Fe3+-citric acid/sodium alginate hydrogel: A photo-responsive platform for rapid water purification

As water pollution in human society becomes more and more serious, the demand for materials that can be used for wastewater treatment is increasing. Here, we reported a sodium alginate-based hydrogel (Fe³⁺-CA/SA hydrogel) that can efficiently photocatalyze the degradation of malachite green. The Fe³⁺-CA/SA hydrogel is composed of sodium alginate, citric acid, and Fe³⁺. The hydrogel has multi-leveled pore structure and photochromic ability. Benefiting from the unique microstructure and positive feedback chemical reaction process, the hydrogel has high photocatalytic efficiency. Under 365 nm UV light irradiation, the hydrogel can degrade around 95% of malachite green (20 mg/L) in about 4 min, and there is no need to add H₂O₂ in the degradation process. The work helps to expand the application of sodium alginate-based hydrogels in the field of water treatment. It also has exploratory significance for the principle of photocatalytic degradation of malachite green.

A comprehensive insight into the application of white rot fungi and their lignocellulolytic enzymes in the removal of organic pollutants

Environmental problems resultant from organic pollutants are a major current challenge for modern societies. White rot fungi (WRF) are well known for their extensive organic compound degradation abilities. The unique oxidative and extracellular ligninolytic systems of WRF that exhibit low substrate specificity, enable them to display a considerable ability to transform or degrade different environmental contaminants. In recent decades, WRF and their ligninolytic enzymes have been widely applied in the removal of polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds (PhACs), endocrine disruptor compounds (EDCs), pesticides, synthetic dyes, and other environmental pollutants, wherein promising results have been achieved. This review focuses on advances in WRF-based bioremediation of organic pollutants over the last 10 years. We comprehensively document the application of WRF and their lignocellulolytic enzymes for removing organic pollutants. Moreover, potential problems and intriguing observations that are worthy of additional research attention are highlighted. Lastly, we discuss trends in WRF-remediation system development and avenues that should be considered to advance research in the field.

Efficient decolorization of recalcitrant dyes at neutral/alkaline pH by a new bacterial laccase-mediator system

Laccases and laccase-mediator systems (LMS) are versatile catalysts that can oxidize a broad range of substrates coupled to the sole reduction of dioxygen to water. They possess many biotechnological applications in paper, textile, and food industries, bioethanol production, organic synthesis, detection and degradation of pollutants, and biofuel cell development. In particular, bacterial laccases are getting relevance due to their activity in a wide range of pH and temperature and their robustness under harsh conditions. However, the enzyme and the redox mediator's availability and costs limit their large-scale commercial use. Here we demonstrate that β-(10-phenothiazyl)-propionic acid can be used as an efficient and low-cost redox mediator for decolorizing synthetic dyes by the recombinant laccase SilA from Streptomyces ipomoeae produced in E. coli. This new LMS can decolorize more than 80% indigo carmine and malachite green in 1 h at pH = 8.0 and 2 h in tap water (pH = 6.8). Furthermore, it decolorized more than 40% of anthraquinone dye remazol brilliant blue R and 80% of azo dye xylidine ponceau in 5 h at 50 °C, pH 8.0. It supported at least 3 decolorization cycles without losing activity, representing an attractive candidate for a cost-effective and environmentally friendly LMS functional at neutral to alkaline pH.

A Brief History of Colour, the Environmental Impact of Synthetic Dyes and Removal by Using Laccases

The history of colour is fascinating from a social and artistic viewpoint because it shows the way; use; and importance acquired. The use of colours date back to the Stone Age (the first news of cave paintings); colour has contributed to the social and symbolic development of civilizations. Colour has been associated with hierarchy; power and leadership in some of them. The advent of synthetic dyes has revolutionized the colour industry; and due to their low cost; their use has spread to different industrial sectors. Although the percentage of coloured wastewater discharged by the textile; food; pharmaceutical; cosmetic; and paper industries; among other productive areas; are unknown; the toxic effect and ecological implications of this discharged into water bodies are harmful. This review briefly shows the social and artistic history surrounding the discovery and use of natural and synthetic dyes. We summarise the environmental impact caused by the discharge of untreated or poorly treated coloured wastewater to water bodies; which has led to physical; chemical and biological treatments to reduce the colour units so as important physicochemical parameters. We also focus on laccase utility (EC 1.10.3.2), for discolouration enzymatic treatment of coloured wastewater, before its discharge into water bodies. Laccases (p-diphenol: oxidoreductase dioxide) are multicopper oxidoreductase enzymes widely distributed in plants, insects, bacteria, and fungi. Fungal laccases have employed for wastewater colour removal due to their high redox potential. This review includes an analysis of the stability of laccases, the factors that influence production at high scales to achieve discolouration of high volumes of contaminated wastewater, the biotechnological impact of laccases, and the degradation routes that some dyes may follow when using the laccase for colour removal.

Laccase as an efficacious approach to remove anticancer drugs: A study of doxorubicin degradation, kinetic parameters, and toxicity assessment

The degradation of an anticancer drug by laccase was investigated for the first time, bringing a new approach to treat these hazardous substances through the direct enzymatic application. Degradations of doxorubicin by laccase were performed in different enzymatic concentrations, pH values and temperatures through kinetic studies. The highest enzymatic degradation of doxorubicin was achieved at pH 7 and 30 ºC, which resembles effluent characteristics from wastewater treatment plants. Assays were carried out in different doxorubicin concentrations to comprehend the enzymatic kinetics of degradation. Michaelis-Menten kinetic parameters obtained were maximum velocity obtained (V_max) of 702.8 µg_DOX h^-1 L^-1 and Michaelis-Menten constant (K_M) of 4.05 µM, which showed a good affinity for the substrate. The toxicity was evaluated against L-929 cell line, and the degraded doxorubicin solution did not show a reduction in cell viability in the concentration of 250 µg L^-1. In contrast, the doxorubicin shows a reduction of 27% in cell viability. Furthermore, in the highest tested concentration (1000 µg L^-1), enzymatic degradation reduced in up 41.4% the toxicity of doxorubicin, which indicates laccase degrades doxorubicin to non-toxic compounds. In conclusion, this study provides a new application to laccase since the results showed great potential to remove anticancer drugs from effluents.

Sustainable liquid supports for laccase immobilization and reuse: Degradation of dyes in aqueous biphasic systems

Novel liquid supports for enzyme immobilization and reuse based on aqueous biphasic systems (ABS) constituted by cholinium-based ionic liquids (ILs) and polymers for the degradation of dyes are here proposed. The biocatalytic reaction for dye decolorization using laccase occured in the biphasic medium, with the enzyme being "supported" in the IL-rich phase and the dye and degradation products being enriched in the polymer-rich phase. An initial screening of the laccase activity in aqueous solutions of ABS constituents, namely cholinium dihydrogen citrate ([Ch][DHC]), cholinium dihydrogen phosphate ([Ch][DHP]), cholinium acetate ([Ch][Acet]), polypropylene glycol 400 (PPG 400), polyethylene glycol 400 (PEG 400) and K₂ HPO₄ was carried out. Compared to the buffered control, a relative laccase activity of up to 170%, 257%, and 530% was observed with PEG 400, [Ch][DHP], and [Ch][DHC], respectively. These ABS constituents were then investigated for the in situ enzymatic biodegradation of the Remazol Brilliant Blue R (RBBR) dye. At the optimized conditions, the ABS constituted by PPG 400 at 46 wt% and [Ch][DHC] at 16 wt% leads to the complete degradation of the RBBR dye, further maintaining the enzyme activity. This ABS also allows an easy immobilization, recovery, and reuse of the biocatalyst for six consecutive reaction cycles, achieving a degradation yield of the dye of 96% in the last cycle. In summary, if properly designed, high enzymatic activities and reaction yields are obtained with ABS as liquid supports, while simultaneously overcoming the safety and environmental concerns of conventional organic solvents used in liquid-liquid heterogeneous reactions, thus representing more sustainable biocatalytic processes.

Biodegradation and metabolic pathway of anthraquinone dyes by Trametes hirsuta D7 immobilized in light expanded clay aggregate and cytotoxicity assessment

Biodegradation and metabolic pathways of three anthraquinone dyes, Reactive Blue 4 (RB4), Remazol Brilliant Blue - R (RBBR), and Acid Blue 129 (AB129) by Trametes hirsuta D7 fungus immobilized in light expanded clay aggregate (LECA) were investigated. Morphological characteristics observed with scanning electron microscope (SEM) showed successful immobilization of the fungus in LECA. Based on UV absorbance measurement, immobilized T. hirsuta D7 effectively degraded 90%, 95%, and 96% of RB4, RBBR and AB129, respectively. Metabolites were identified with high-resolution mass spectrometry (HRMS) and degradation pathway of the dyes by T. hirsuta D7 was proposed. Toxicity assay on human dermal fibroblast (HDF) showed that anthraquinone dyes exhibits significant toxicity of 35%, 40%, and 34% reduction of cell viability by RB4, RBBR, and AB129, respectively. Fungal treatment resulted in an abatement of the toxicity and cell viability was increased up to 94%. The data clearly showed the effectiveness of immobilized T. hirsuta D7 in LECA on detoxification of anthraquinone dyes. This study provides potential and fundamental understanding of wastewater treatment using the newly isolated fungus T. hirsuta D7.

Partial purification and characterization of a thermophilic and alkali-stable laccase of Phoma herbarum isolate KU4 with dye-decolorization efficiency

Production of an extracellular thermophilic and alkali stable laccase from Phoma herbarum isolate KU4 was reported for the first time, both in submerged fermentation (SmF, highest 1590 U/mL) and solid state fermentation (SSF, highest 2014.21 U/mL) using agro-industrial residues. The laccase was partially purified to 7.93 fold with the apparent molecular weight of 298 kDa. The enzyme had pH optimum at 5.0 and temperature optimum at 50 °C, with maximum stability at pH 8.0. It showed activity towards various phenolic and non-phenolic compounds. The kinetic parameters, K_m, V_max and K_cat of the laccase for DMP were 0.216 mM, 270.27 U/mg and 506.69 s^-1, respectively. Laccase activity was inhibited by various metal ions and conventional inhibitors, however, it was slightly increased by Zn²⁺. The laccase showed good decolorization efficiency towards four industrial dyes, namely, methyl violet (75.66%), methyl green (65%), indigo carmine (58%) and neutral red (42%) within 24 h. FTIR analysis of the decolorized products confirmed the degradation of the dyes. The decolorization efficiency of the enzyme suggests that the partially purified laccase could be used to decolorize synthetic dyes present in industrial effluents and for waste water treatments. The thermophilic and alkali stable laccase may also have wider potential industrial applications.

Decolorization kinetics and mass transfer mechanisms of Remazol Brilliant Blue R dye mediated by different fungi

The release of synthetic dye into the environment causing abnormal growth of phytoplankton may lead to a decline in the photosynthetic performance of aquatic ecosystem. Scientific knowledge of Remazol Brilliant Blue R (RBBR) decolorization is essential for designing the engineered bioremediation systems of employing fungal mycelium. The biodegradation of RBBR dye mediated by an appropriate fungus was analyzed using the modified mass transfer factor models to get better understanding on the decolorization kinetics and mechanisms of external and internal mass transfer. The results showed that the limited capacities of the kinetic and isotherm models are still not able to comprehensively explain many important phenomena of RBBR decolorization mediated by the T. citrinoviride, T. koningiopsis and Pestalotiopsis sp. strains. The rate-limiting step of RBBR decolorization depends on the EMT resistance and the vegetative growth rates of T. citrinoviride, T. koningiopsis and Pestalotiopsis sp. strains can be described by second-order polynomial equation. The analysis of decolorization performance may provide a new insight on the role of fungus in the degradation of RBBR dye.

Investigation of reactive Blue 19 biodegradation and byproducts toxicity assessment using crude laccase extract from Trametes versicolor

Crude laccase potency on biodegradation and detoxification of Reactive blue 19 (RB-19) were demonstrated, along with prediction of degradation mechanisms, pathways and byproducts analysis. Trametes versicolor, cultured on pampas grass inflorescence (Cortaderia selloana), yielded the best crude laccase activity (15.36 U/g). 10 U CLE activities demonstrated a biodegradation yield (85%) in 210 min, at pH 4, 50 °C and 200 mg/L RB-19 concentrations. Evolution of a brown color that absorbed maximally at 478 nm was observed during biodegradation. Two methods were adopted for byproducts extraction, three methods for toxicity analysis and four models for kinetic parameters (K_m and V_max) determination. 2-ethylanthracene, 2-hydroxycyclohexa-2,4-dien-1-one, 2(4-methylphenyl)-ethan-1-amine, 1-[6-hydroperoxy-4,5-bis(sulfooxy)oxan-3-yl]triaza-1,2-dien-2-ium, naphthalene-2,7-disulfonic acid and N-[(5-oxooxolan-2-yl)methyl]acetamide were detected as toxic byproducts. Brown color evolution was due to 1,1,1-triethyl-3-(methoxycarbonyl)-2,2-dioxo-2λ6-diazathian-1-ium (methoxycarbonyl sulfanyl-triethylammonium hydroxide) inner salt. Increase in color density (light to dark brown) was a function of byproduct(s) biodegradation and polymerization. RB-19 and byproduct acute toxicities were decreased significantly (98% - 6.91%). Kinetic parameters K_m (18.05 mg/L) and V_max (0.31 mg/L. min^-1) from the four kinetic models demonstrated higher affinity of CLE to RB-19. CLE yielded a catalytic activity (V_max/K_m =0.017 min^-1) demonstrating the flexibility of CLE active site to RB-19 binding over commercial laccase.

Degradation of Anthraquinone Dyes from Effluents: A Review Focusing on Enzymatic Dye Degradation with Industrial Potential

Up to 84 000 tons of dye can be lost in water, and 90 million tons of water are attributed annually to dye production and their application, mainly in the textile and leather industry, making the dyestuff industry responsible for up to 20% of the industrial water pollution. The majority of dyes industrially used today are aromatic compounds with complex, reinforced structures, with anthraquinone dyes being the second largest produced in terms of volume. Despite the progress on decolorization and degradation of azo dyes, very little attention has been given to anthraquinone dyes. Anthraquinone dyes pose a serious environmental problem as their reinforced structure makes them difficult to degrade naturally. Existing methods of decolorization might be effective but are neither efficient nor practical due to extended time, space, and cost requirements. Attention should be given to the emerging routes for dye decolorization via the enzymatic action of oxidoreductases, which have already a strong presence in various other bioremediation applications. This review will discusses the presence of anthraquinone dyes in the effluents and ways for their remediation from dyehouse effluents, focusing on enzymatic processes.

The roles of Pleurotus ostreatus HAUCC 162 laccase isoenzymes in decolorization of synthetic dyes and the transformation pathways

Fungal laccases have shown great potential in industrial and environmental applications. They are generally produced as laccase isoenzymes. Thus, to further study the properties of different laccase isoenzymes and their performance in bio-remediation is essential for a deep understanding of laccase function and application. In this study, three Pleurotus ostreatus HAUCC 162 laccase isoenzymes were heterologously expressed, and the effects of different inhibitors, metal ions, and organic solvents on the activity of recombinant laccases were evaluated. In the dye decolorization test, LACC6 showed the highest ability to remove Malachite green (MG), Remazol Brilliant Blue R (RBBR), Bromophenol blue (BB), and Methyl orange (MO) among the three recombinant laccases. Removal rates within 24 h were 91.5%, 84.9%, 79.1%, and 73.1% for MG (100 mg/L), RBBR (100 mg/L), BB (100 mg/L), and MO (100 mg/L), respectively. The MG and RBBR transformation pathways were proposed by using High Performance Liquid Chromatography-Mass Spectrometry (LC-MS) analysis. Based on the results of this work, the production of recombinant LACC6 or improving the portion of LACC6 in the crude extracellular laccase may advance synthetic dye removal.

Bioprocess optimization of laccase production through solid substrate fermentation using Perenniporia tephropora-L168 and its application in bioremediation of triaryl-methane dye

Laccases are multi copper oxidases that can oxidize both phenolic and nonphenolic lignin related compounds. Consequently, there has been continuous demand for laccases for the oxidative degradation of phenolic dyes in effluents. In view of this, the present work was focused on laccase production by solid substrate fermentation using a newly isolated fungus Perenniporia tephropora-L168. To intensify the laccase production, the process parameters pH, nitrogen, inducer, and substrate: water ratio were optimized by using statistical model. A set of optimal conditions noted were pH 3, nitrogen 0.001 g/L; inducer 0.5% and substrate: water ratio (1:10), which yielded laccase 1,160 U/g. The crude laccase exhibited noteworthy potential to degrade a triaryl-methane dye especially Malachite green. Also, during bioremediation studies, the statistical process optimization could achieve 81% decolourization within 180 min. The laccase treatment brought chemical transformation in malachite green as evident from UV-Visible spectra, FTIR, HPLC while toxicity against bacteria and fungi was also reduced. During phytotoxicity study, effect of treated and untreated dye on germination of seed was analyzed. Interestingly, the germination index for Vigna aconitifolia and Vigna radiata was increased by two and fourfold, respectively. Overall, this work demonstrates optimized production of laccase using Perenniporia tephropora-L168 and its efficient bioremediation potential for triaryl-methane dye.

Stability of Selected Hydrogen Bonded Semiconductors in Organic Electronic Devices

The electronics era is flourishing and morphing itself into Internet of Everything, IoE. At the same time, questions arise on the issue of electronic materials employed: especially their natural availability and low-cost fabrication, their functional stability in devices, and finally their desired biodegradation at the end of their life cycle. Hydrogen bonded pigments and natural dyes like indigo, anthraquinone and acridone are not only biodegradable and of bio-origin but also have functionality robustness and offer versatility in designing electronics and sensors components. With this Perspective, we intend to coalesce all the scattered reports on the above-mentioned classes of hydrogen bonded semiconductors, spanning across several disciplines and many active research groups. The article will comprise both published and unpublished results, on stability during aging, upon electrical, chemical and thermal stress, and will finish with an outlook section related to biological degradation and biological stability of selected hydrogen bonded molecules employed as semiconductors in organic electronic devices. We demonstrate that when the purity, the long-range order and the strength of chemical bonds, are considered, then the Hydrogen bonded organic semiconductors are the privileged class of materials having the potential to compete with inorganic semiconductors. As an experimental historical study of stability, we fabricated and characterized organic transistors from a material batch synthesized in 1932 and compared the results to a fresh material batch.

Enhanced production, one-step affinity purification, and characterization of laccase from solid-state culture of Lentinus tigrinus and delignification of pistachio shell by free and immobilized enzyme

Laccase mediated bio-delignification has shown promising results for the removal of lignin from bio-wastes and for providing a sustainable future for using of lignocellulosic materials in different industries. This study reports an extracellular laccase from Lentinus tigrinus with delignification capability. The production of laccase was enhanced through a solid-state fermentation on the pistachio shell bio-waste to 172.0 U mg^-1 (8.2-fold) by one-factor-at-a-time optimizing of fermentation conditions. Laccase was purified using a new synthetic affinity resin yielding a specific activity of 543.6 U mg^-1 and a 23.9-fold purification. The purified laccase was then immobilized covalently on the large pore magnetic SBA-15. Compared to free enzyme, immobilized enzyme maintained more stable at pH 2.0-11.0 and 25-55 °C, and against organic solvents, surfactants, metal ions, and inhibitors. The activity of both forms of the enzyme was increased with Cu²⁺, Ca⁺², cetyltrimethylammonium bromide, and ethyl acetate. A 0.72 V redox potential caused enzyme specificity to various substrates. 80% of lignin content of the bio-waste was removed by 50 U mL^-1 of immobilized enzyme after 8 h fermentation and delignification efficiency was greatly increased by applying higher enzyme dosages, surfactants, and organic solvents. In addition, residual activity was more than 50% after 20 cycles of delignification. The results of delignification were confirmed by GC-MS, SEM, and composition analysis of pistachio shells. This study illustrated the notable promise of the enzyme for biotechnological and environmental applications.

Determination of the color removal efficiency of laccase enzyme depending on dye class and chromophore

The aim of this article was to clarify which type of dye chromophores could be decolorized efficiently with the use of laccase enzyme. For this purpose, enzymatic degradation of different type of dye classes (4 reactive, 2 acid and 1 basic dye) having various chromophore groups was investigated by using commercial laccase from Cerrena unicolor. It was observed that the chromophore structure of dye is very important on enzymatic color removal efficiency. According to the experimental results, it was found that color removal efficiencies (20 mg/L initial dye) were 98.7% for RB220 (0.1 g/L enzyme after 6 h), 95.1% for RB19 (0.1 g/L enzyme after 48 h), 90.8% for AR42 (0.1 g/L enzyme after 48 h) while they were 60.9% for AR114 (0.25 g/L enzyme), 58.6% for RB21 (0.5 g/L enzyme), 39.7% for RR239 (0.25 g/L enzyme) even after seven days. As a result, it can be said that the highest decolorization rate was achieved for the reactive dye having formazan copper complex (RB220) chromophore. On the other hand, the enzymatic degradation of basic dye (BB9) was found to be rather difficult compared to the acid and reactive dyes used in this study and the maximum color removal was 42.8% after seven days.

Laccase Immobilized onto Zirconia⁻Silica Hybrid Doped with Cu2+ as an Effective Biocatalytic System for Decolorization of Dyes

Nowadays, novel and advanced methods are being sought to efficiently remove dyes from wastewaters. These compounds, which mainly originate from the textile industry, may adversely affect the aquatic environment as well as living organisms. Thus, in presented study, the synthesized ZrO₂–SiO₂ and Cu²⁺-doped ZrO₂–SiO₂ oxide materials were used for the first time as supports for laccase immobilization, which was carried out for 1 h, at pH 5 and 25 °C. The materials were thoroughly characterized before and after laccase immobilization with respect to electrokinetic stability, parameters of the porous structure, morphology and type of surface functional groups. Additionally, the immobilization yields were defined, which reached 86% and 94% for ZrO₂–SiO₂–laccase and ZrO₂–SiO₂/Cu²⁺–laccase, respectively. Furthermore, the obtained biocatalytic systems were used for enzymatic decolorization of the Remazol Brilliant Blue R (RBBR) dye from model aqueous solutions, under various reaction conditions (time, temperature, pH). The best conditions of the decolorization process (24 h, 30 °C and pH = 4) allowed to achieve the highest decolorization efficiencies of 98% and 90% for ZrO₂–SiO₂–laccase and ZrO₂–SiO₂/Cu²⁺–laccase, respectively. Finally, it was established that the mortality of Artemia salina in solutions after enzymatic decolorization was lower by approx. 20% and 30% for ZrO₂–SiO₂–laccase and ZrO₂–SiO₂/Cu²⁺–laccase, respectively, as compared to the solution before enzymatic treatment, which indicated lower toxicity of the solution. Thus, it should be clearly stated that doping of the oxide support with copper ions positively affects enzyme stability, activity and, in consequence, the removal efficiency of the RBBR dye.

Hazardous contaminants in the environment and their laccase-assisted degradation - A review

In recent years, owing to the serious ecological risks and human health-related adverse effects, the wide occurrence of hazardous contaminants along with their potential to enter the environment have gained great public concerns. In this context, significant actions are urgently required to tackle the ignorance and inefficient monitoring/removal of emerging/(re)-emerging contaminants (ECs) in the environment from different routes of concerns, i.e., industrial waste, pharmaceutical, personal care products (PCPs), toxic effluents, etc. Laccases are multinuclear copper-containing oxidoreductases and can carry out one electron oxidation of a broad spectrum of environmentally related contaminants. In biotechnology, this group of versatile enzymes is known as a green catalyst/green tool with enormous potentialities to tackle ECs of high concern. In this review, we endeavored to present up-to-date literature concerning the potential use of immobilized laccases for the degradation and remediation of various types of environmental pollutants present in the environment. Both, pristine and immobilized, laccases have shown great capacity to oxidative degradation and mineralization of endocrine disrupting chemicals (EDs) in batch treatment processes as well as in large-scale continuous reactors. These properties make laccase as particularly attractive biocatalysts in environmental remediation processes, and their use might be advantageous over the conventional treatments. This review summarizes the most significant recent advances in the use of laccases and their future perspectives in environmental biotechnology.

Purification and characterization of a fungal laccase from the ascomycete Thielavia sp. and its role in the decolorization of a recalcitrant dye

A laccase-producing ascomycete was isolated from arid soil in Tunisia. This fungus was identified as Thielavia sp. using the phylogenetic analysis of rDNA internal transcribed spacers. The extracellular laccase produced by the fungus was purified to electrophoretic homogeneity, showing a molecular mass around 70 kDa. The enzyme had an optimum pH of 5.0 and 6.0 for ABTS and 2,6‑DMP, respectively and it showed remarkable high thermal stability, showing its optimal temperature at 70 °C (against 2,6‑DMP). It presented slight inhibiting effect by EDTA, SDS and l‑cyst although this effect was more marked by sodium azide (0.1 mM). On the other hand, it showed tolerance to up to 300 mM NaCl, retaining around 50% of its activity at 900 mM. Among the metal ions tested on TaLac1, Mn²⁺ showed an activating effect. Their kinetic parameters K_m and k_cat were 23.7 μM and 4.14 s^-1 for ABTS, and 24.3 μM and 3.46 s^-1 towards 2,6‑DMP. The purified enzyme displayed greater efficiency in Remazol Brilliant Blue R decolorization (90%) in absence of redox mediator, an important property for biotechnological applications.

Biodegradation of textile wastewater: enhancement of biodegradability via the addition of co-substrates followed by phytotoxicity analysis of the effluent

This work reports on the biodegradation of textile wastewater by three alternative microbial treatments. A bacterial consortium, isolated from a dyeing factory, showed significant efficacy in decolourizing wastewater (77.6 ± 3.0%); the decolourization rate was 5.80 ± 0.31 mg of azo dye·L^-1·h^-1, without the addition of an ancillary carbon source (W). The degradation was 52% (measured as COD removal) and the products of the treatment showed low biodegradability (COD/BOD₅ = 4.2). When glucose was added to the wastewater, (W + G): the decolourization efficiency increased to 87.24 ± 2.5% and the decolourization rate significantly improved (25.67 ± 3.62 mg·L^-1·h^-1), although the COD removal efficiency was only 44%. Finally, the addition of starch (W + S) showed both a similar decolourization rate and efficiency to the W treatment, but a higher COD removal efficiency (72%). In addition, the biodegradability of the treated wastewater was considerably improved (COD/BOD₅ = 1.2) when starch was present. The toxicity of the degradation products was tested on Lactuca sativa seeds. In all treatments, toxicity was reduced with respect to the untreated wastewater. The W + S treatment gave the best performance.

Stable ABTS Immobilized in the MIL-100(Fe) Metal-Organic Framework as an Efficient Mediator for Laccase-Catalyzed Decolorization

The successful encapsulation of 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), a well-known laccase mediator, within a mesoporous metal-organic framework sample (i.e., MIL-100(Fe)) was achieved using a one-pot hydrothermal synthetic method. The as-prepared ABTS@MIL-100(Fe) was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, nitrogen sorption, and cyclic voltammetry (CV). Our ABTS@MIL-100(Fe)-based electrode exhibited an excellent electrochemical response, indicating that MIL-100(Fe) provides an appropriate microenvironment for the immobilization and electroactivity of ABTS molecules. ABTS@MIL-100(Fe) was then evaluated as an immobilized laccase mediator for dye removal using indigo carmine (IC) as a model dye. Through the application of laccase in combination with a free (ABTS) or immobilized (ABTS@MIL-100(Fe)) mediator, decolorization yields of 95% and 94%, respectively, were obtained for IC after 50 min. In addition, following seven reuse cycles of ABTS@MIL-100(Fe) for dye treatment, a decolorization yield of 74% was obtained. Dye decolorization occurred through the breakdown of the chromophoric group by the Laccase/ABTS@MIL-100(Fe) system, and a catalytic mechanism was proposed. We therefore expect that the stability, reusability, and validity of ABTS@MIL-100(Fe) as a laccase mediator potentially render it a promising tool for dye removal, in addition to reducing the high running costs and potential toxicity associated with synthetic mediators.

Decolorization pathways of anthraquinone dye Disperse Blue 2BLN by Aspergillus sp. XJ-2 CGMCC12963

Anthraquinone dye represents an important group of recalcitrant pollutants in dye wastewater. Aspergillus sp XJ-2 CGMCC12963 showed broad-spectrum decolorization ability, which could efficiently decolorize and degrade various anthraquinone dyes (50 mg L^-1) under microaerophilic condition. And the decolorization rate of 93.3% was achieved at 120 h with Disperse Blue 2BLN (the target dye). Intermediates of degradation were detected by FTIR and GC-MS, which revealed the cleavage of anthraquinone chromophoric group and partial mineralization of target dye. In addition, extracellular manganese peroxidase showed the most closely related to the increasing of decolorization rate and biomass among intracellular and extracellular ligninolytic enzymes. Given these results, 2 possible degraded pathways of target dye by Aspergillus sp XJ-2 CGMCC12963 were proposed first in this work. The degradation of Disperse Blue 2BLN and broad spectrum decolorization ability provided the potential for Aspergillus sp XJ-2 CGMCC12963 in the treatment of wastewater containing anthraquinone dyes.

Performance and microbial community structures of hydrolysis acidification process treating azo and anthraquinone dyes in different stages

In this study, performance of hydrolysis acidification process treating simulated dyeing wastewater containing azo and anthraquinone dyes in different stages was investigated. The decolorization ratio, COD_Cr removal ratio, BOD₅/COD_Cr value, and volatile fatty acids (VFAs) production were almost better in stage 1 than that in stage 2. Fourier transform infrared spectroscopy (FTIR) and gas chromatography-mass spectrometry (GC-MS) confirmed the biodegradation of Reactive Black 5 (RB5) and Remazol Brilliant Blue R (RBBR) in hydrolysis acidification process. Polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analyses revealed that significant difference of microbial community structures existed in stage 1 and 2. The dominant species in stage 1 was related to Bacteroidetes group, while the dominant species in stage 2 was related to Bacteroidetes and Firmicutes groups. From the results, it could be speculated that different dyes' structures might have significant influence on the existence and function of different bacterial species, which might supply information for bacteria screening and acclimation in the treatment of actual dyeing wastewater.

Facile synthesis of low-cost biomass-based γ-Fe2O3/C for efficient adsorption and catalytic degradation of methylene blue in aqueous solution

In this study, a novel and low-cost method was developed for synthesizing magnetic porous γ-Fe₂O₃/C as an adsorbent and catalyst for removal of methylene blue (MB) from aqueous solution.

Purification and characterization of laccase from Marasmius species BBKAV79 and effective decolorization of selected textile dyes

A novel laccase-producing white-rot fungus, Marasmius sp. BBKAV79 (Genbank Accession Number-KP455496, KP455497), was isolated and subjected to purification, characterization and dye decolorization study. The purified enzyme was obtained with a specific activity of 0.226 U mg-1 protein and a final yield of 13.5 %. The enzyme was found to be a monomeric protein with a molecular mass of ~75 kDa as estimated by non-denaturing polyacrylamide gel electrophoresis (PAGE) and further confirmed with zymogram analysis. The optimal pH and temperature of the laccase was recorded to be 5.5 and 40 °C, respectively. The metal ions Hg2+ and Ag+ were found to drastically inhibit the activity of laccase at the rate of 96.6 and 96.5 %, respectively. Nevertheless, Fe3+ was found to inhibit laccase activity at 40 %. Phenylmethanesulfonyl fluoride (PMSF) strongly inhibited the laccase activity, and additives viz, sodium dodecyl sulfate (SDS), hydrogen peroxide (H2O2) and sodium chloride (NaCl) were known to follow the earlier pattern of enzyme inhibition. The values of kinetic parameters K m and V max for purified laccase were noted at 3.03 mM and 5 μmol min-1, respectively, for guaiacol as substrate. The textile dyes were decolorized at a range of 72-76 % and 88-93 % when treated with Marasmius sp. BBKAV79 and purified laccase, respectively. Based on the outcome of the present investigation, it could be, therefore, inferred that laccase isolated from Marasmius sp. BBKAV79 effectively decolorizes the textile dyes; however, the metal ions Hg2+, Ag+ and Fe3+ and agents like PMSF, SDS, H2O2 and NaCl pose an effective inhibitory potential under specified physicochemical conditions.