Critical review on biosurfactant analysis, purification and characterization using rhamnolipid as a model biosurfactant

Recent progress in microbial biosurfactants production strategies: Applications, technological bottlenecks, and future outlook

Biosurfactants are surface-active compounds produced by numerous microorganisms. They have gained significant attention due to their wide applications in food, pharmaceuticals, cosmetics, agriculture, and environmental remediation. The production efficiency and yield of microbial biosurfactants have improved significantly through the development and optimization of different process parameters. This review aims to provide an in-depth analysis of recent trends and developments in microbial biosurfactant production strategies, including submerged, solid-state, and co-culture fermentation. Additionally, review discusses biosurfactants' applications, challenges, and future perspectives. It highlights their advantages over chemical surfactants, emphasizing their biodegradability, low toxicity, and diverse chemical structures. However, the critical challenges in commercializing include high production costs and low yield. Strategies like genetic engineering, process optimization, and downstream processing, have been employed to address these challenges. The review provides insights into current commercial producers and highlights future perspectives such as novel bioprocesses, efficient microbial strains, and exploring their applications in emerging industries.

Process Optimization for Biosurfactant Production by Bacillus aryabhattai SPS1001 using Taguchi Method

This study employs Taguchi design of experiments (DOE) to optimize biosurfactant yield by analyzing the impact of various input parameters. Signal-to-noise ratio analysis was utilized for optimization, corroborated by ANOVA findings. Regression equations depicted response behaviour and are validated through a confirmation test. Taguchi methodology identified optimal conditions for maximum biosurfactant yield: agitation (180 rpm), inoculum size (2%), beef extract (5 g/L), diesel (20 ml/L), peptone (5 g/L), NaCl (7 g/L), incubation time (4 days), pH (7.9), and yeast extract (6 g/L). This yielded an 8.33% increase to 1.53 g/L, with initial optimum parameters projecting 1.41 g/L. ANOVA ranked and quantified control factor contributions, revealing agitation's significant (31.41%) impact on yield. The study underscores the viability of Taguchi's optimal conditions for substantial yield improvement within specific ranges. The strong alignment between expected and experimental yields affirmed the reliability of developed models for optimal yield selection. This study underscores the power of statistical techniques like Taguchi DOE and ANOVA in systematically enhancing biosurfactant production by Bacillus aryabhattai SPS1001 and paves the way for future advancements in bioprocess optimization.

Antibacterial mechanism of Pseudomonas aeruginosa UKMP14T rhamnolipids against multidrug resistant Acinetobacter baumannii

Rhamnolipids, a major category of glycolipid biosurfactant, have recently gained enormous attention in medical field because of their relevance as effective antibacterial agents against a wide variety of pathogenic bacteria. Our previous studies have shown that rhamnolipids from an environmental isolate of Pseudomonas aeruginosa UKMP14T possess antibacterial, anti-adhesive and anti-biofilm activity against multidrug-resistant ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Enterobacter sp.) pathogens. However, the mechanism of their antibacterial action remains unclear. Thus, this study aimed to elucidate the mechanism of the antibacterial action of P. aeruginosa UKMP14T rhamnolipids by studying the changes in cells of one of the ESKAPE pathogens, Acinetobacter baumannii, which is the most difficult strain to kill. Results revealed that rhamnolipid treatment rendered A. baumannii cells more hydrophobic as evaluated through contact angle measurements. It also induced the release of cellular proteins measuring 510 μg/mL at a rhamnolipid concentration of 1000 μg/mL. In addition, rhamnolipids were found to be bactericidal in their action as they could permeate the inner membranes, leading to a leak-out of nucleotides. More than 50 % of the cells were found to be killed upon 1000 μg/mL rhamnolipid treatment as observed through fluorescence microscopy. Other cellular changes such as irregular shape and size, membrane perturbations, clumping, shrinkage and physical damage were clearly visible in SEM, FESEM and laser micrographs. Furthermore, rhamnolipid treatment inhibited the levels of acyl-homoserine lactones (AHLs) in A. baumannii, which are vital for their biofilm formation and virulence. The obtained results indicate that P. aeruginosa UKMP14T rhamnolipids target outer and inner bacterial membranes through permeation, including physical damage to the cells, leading to cell leakage. Furthermore, AHL inhibition appears to be the mechanism behind their anti-biofilm action. All these observations can be correlated to rhamnolipids' antibacterial effect against A. baumannii.

Bioadhesive Polymeric Films Containing Rhamnolipids, An Innovative Antimicrobial Topical Formulation

Acne affects most of the world's population, causing an impact on the self-esteem of adolescents and young adults. One of the causes is the presence of the bacteria Cutibacterium acnes which are part of the natural microbiota of the skin. Topical treatments consist of anti-inflammatory and antibiotics, which could select resistant strains. Alternatives to the antibiotic are biocomposites that have antimicrobial activity like biosurfactants which are produced by bacteria. An innovative way of applying these compounds is bioadhesive polymeric films that adhere to the skin and release the active principle topically. Rhamnolipids have great potential to be used in the treatment of acne because they present antimicrobial activity against C. acnes in low and safe concentrations (MIC of 15.62 µg/mL, CBM of 31.25 µg/mL and CC50 of 181.93 µg/mL). Four films with different rhamnolipids concentrations (0.0; 0.1; 0.2; and 0.3%, w/w) were obtained as to visual appearance, mass variation, thickness, density, solubility, pH, water vapor transmission, mechanical properties (folding endurance, bioadhesion strength, tensile strength, elongation at break and Young's modulus), scanning electron microscopy and infrared. The results show that these formulations had a homogeneous appearance; elastic mechanical properties; pH similar to human skin and bioadhesive. The polymeric films containing rhamnolipids were effective against C. acnes, in the in vitro test, at the three concentrations tested, the film with the highest concentration (0.3%, w/w) being the most promising for presenting the highest antimicrobial activity. Thus, the polymeric film containing rhamnolipids has the potential to be used in the treatment of acne.

Common operational issues and possible solutions for sustainable biosurfactant production from lignocellulosic feedstock

Surfactants are compounds with high surface activity and emulsifying property. These compounds find application in food, medical, pharmaceutical, and petroleum industries, as well as in agriculture, bioremediation, cleaning, cosmetics, and personal care product formulations. Due to their widespread use and environmental persistence, ensuring biodegradability and sustainability is necessary so as not to harm the environment. Biosurfactants, i.e., surfactants of plant or microbial origin produced from lignocellulosic feedstock, perform better than their petrochemically derived counterparts on the scale of net-carbon-negativity. Although many biosurfactants are commercially available, their high cost of production justifies their application only in expensive pharmaceuticals and cosmetics. Besides, the annual number of new biosurfactant compounds reported is less, compared to that of chemical surfactants. Multiple operational issues persist in the biosurfactant value chain. In this review, we have categorized some of these issues based on their relative position in the value chain - hurdles occurring during planning, upstream processes, production stage, and downstream processes - alongside plausible solutions. Moreover, we have presented the available paths forward for this industry in terms of process development and integrated pretreatment, combining conventional tried-and-tested strategies, such as reactor designing and statistical optimization with cutting-edge technologies including metabolic modeling and artificial intelligence. The development of techno-economically feasible biosurfactant production processes would be instrumental in the complete substitution of petrochemical surfactants, rather than mere supplementation.

Promising Application, Efficient Production, and Genetic Basis of Mannosylerythritol Lipids

Mannosylerythritol lipids (MELs) are a class of glycolipids that have been receiving increasing attention in recent years due to their diverse biological activities. MELs are produced by certain fungi and display a range of bioactivities, making them attractive candidates for various applications in medicine, agriculture, and biotechnology. Despite their remarkable qualities, industrial-scale production of MELs remains a challenge for fungal strains. Excellent fungal strains and fermentation processes are essential for the efficient production of MELs, so efforts have been made to improve the fermentation yield by screening high-yielding strains, optimizing fermentation conditions, and improving product purification processes. The availability of the genome sequence is pivotal for elucidating the genetic basis of fungal MEL biosynthesis. This review aims to shed light on the applications of MELs and provide insights into the genetic basis for efficient MEL production. Additionally, this review offers new perspectives on optimizing MEL production, contributing to the advancement of sustainable biosurfactant technologies.

Droplet microfluidic system for high throughput and passive selection of bacteria producing biosurfactants

Traditional methods for the enrichment of microorganisms rely on growth in a selective liquid medium or on an agar plate, followed by tedious characterization. Droplet microfluidic techniques have been recently used to cultivate microorganisms and preserve enriched bacterial taxonomic diversity. However, new methods are needed to select droplets comprising not only growing microorganisms but also those exhibiting specific properties, such as the production of value-added compounds. We describe here a droplet microfluidic screening technique for the functional selection of biosurfactant-producing microorganisms, which are of great interest in the bioremediation and biotechnology industries. Single bacterial cells are first encapsulated into picoliter droplets for clonal cultivation and then passively sorted at high throughput based on changes in interfacial tension in individual droplets. Our method expands droplet-based microbial enrichment with a novel approach that reduces the time and resources needed for the selection of surfactant-producing bacteria.

Performance evaluation of rhamnolipid biosurfactant produced by Pseudomonas aeruginosa and its effect on marine oil-spill remediation

This study aimed to reveal that the effect of biosurfactant on the dispersion and degradation of crude oil. Whole genome analysis showed that Pseudomonas aeruginosa GB-3 contained abundant genes involved in biosurfactant synthesis and metabolic processes and had the potential to degrade oil. The biosurfactant produced by strain GB-3 was screened by various methods. The results showed that the surface tension reduction activity was 28.6 mN·m-1 and emulsification stability was exhibited at different pH, salinity and temperature. The biosurfactant was identified as rhamnolipid by LC-MS and FTIR. The fermentation conditions of strain GB-3 were optimized by response surface methodology, finally the optimal system (carbon source: glucose, nitrogen source: ammonium sulfate, C/N ratio:16:1, pH: 7, temperature: 30-35 °C) was determined. Compared with the initial fermentation, the yield of biosurfactant increased by 4.4 times after optimization. In addition, rhamnolipid biosurfactant as a dispersant could make the dispersion of crude oil reach 38% within seven days, which enhanced the bioavailability of crude oil. As a biostimulant, it could also improve the activity of indigenous microorganism and increase the degradation rate of crude oil by 10-15%. This study suggested that rhamnolipid biosurfactant had application prospect in bioremediation of marine oil-spill.

Microbial lipopeptides: their pharmaceutical and biotechnological potential, applications, and way forward

As lead molecules, cyclic lipopeptides with antibacterial, antifungal, and antiviral properties have garnered a lot of attention in recent years. Because of their potential, cyclic lipopeptides have earned recognition as a significant class of antimicrobial compounds with applications in pharmacology and biotechnology. These lipopeptides, often with biosurfactant properties, are amphiphilic, consisting of a hydrophilic moiety, like a carboxyl group, peptide backbone, or carbohydrates, and a hydrophobic moiety, mostly a fatty acid. Besides, several lipopeptides also have cationic groups that play an important role in biological activities. Antimicrobial lipopeptides can be considered as possible substitutes for antibiotics that are conventional to address the current drug-resistant issues as pharmaceutical industries modify the parent antibiotic molecules to render them more effective against antibiotic-resistant bacteria and fungi, leading to the development of more resistant microbial strains. Bacillus species produce lipopeptides, which are secondary metabolites that are amphiphilic and are typically synthesized by non-ribosomal peptide synthetases (NRPSs). They have been identified as potential biocontrol agents as they exhibit a broad spectrum of antimicrobial activity. A further benefit of lipopeptides is that they can be produced and purified biotechnologically or biochemically in a sustainable manner using readily available, affordable, renewable sources without harming the environment. In this review, we discuss the biochemical and functional characterization of antifungal lipopeptides, as well as their various modes of action, method of production and purification (in brief), and potential applications as novel antibiotic agents.

Integrated approach of nano assisted biodegradation of anthracene by Pseudomonas aeruginosa and iron oxide nanoparticles

Poly aromatic hydrocarbons (PAHs) are considered as hazardous compounds which causes serious threat to the environment dua to their more carcinogenic and mutagenic impacts. In this study, Pseudomonas aeruginosa PP4 strain and synthesized iron nanoparticles were used to evaluate the biodegradation efficiency (BE %) of residual anthracene. The BE (%) of mixed degradation system (Anthracene + PP4+ FeNPs) was obtained about 67 %. The FTIR spectra result revealed the presence of functional groups (C-H, -CH3, CC, =C-H) in the residual anthracene. The FESEM and TEM techniques were used to determine the surface analysis of the synthesized FeNPs and the average size was observed by TEM around 5-50 nm. The crystalline nature of the synthesized iron nanoparticles was confirmed by the observed different respective peaks of XRD pattern. The various functional constituents (OH, C-H, amide I, CH3) were identified in the synthesized iron nanoparticles by FTIR spectrum. In conclusion, this integrated nano-bioremediation approach could be an promising and effective way for many environmental fields like cleanup of hydrocarbon rich environment.

Synergistic promotion of sludge reduction by surfactant-producing and lysozyme-producing bacteria: Optimization and effect of Na. BIORESOURCE TECHNOLOGY 2024;393:130065. [PMID: 37984671 DOI: 10.1016/j.biortech.2023.130065] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

To improve the efficiency of aerobic digestion, this investigation utilized the synergistic effect of lysozyme-producing strain YH14 and surfactant-producing strain ZXY4 to promote sludge hydrolysis, and added NaCl to enhance this promoting effect. The best performance in promoting sludge hydrolysis was achieved when the inoculum of functional bacteria was 12 % (inoculum ratio of strain YH14: strain ZXY4 = 1:3) and the dosage of NaCl was 5 g L-1, which caused an increase of 19.25 % in the SS removal rate and 2588.21 mg L-1 in the SCOD release, as compared with the control. Fluorescence region integral analysis shows that the synergy of two functional bacteria and NaCl can enhance the biodegradability of sludge. Protein secondary structure analysis shows that strain ZXY4 and Na+ cause the EPS structure to loosen, increasing the chances of lysozyme lysis of bacteria. Nucleotide metabolism, metabolism of other amino acids and membrane transport enhanced in a co-processing system.

A comprehensive review of biosurfactant production and its uses in the pharmaceutical industry

Biosurfactants are naturally occurring, surface-active chemicals generated by microorganisms and have attracted interest recently because of their numerous industrial uses. Compared to their chemical equivalents, they exhibit qualities that include lower toxic levels, increased biodegradable properties, and unique physiochemical properties. Due to these traits, biosurfactants have become attractive substitutes for synthetic surfactants in the pharmaceutical industry. In-depth research has been done in the last few decades, demonstrating their vast use in various industries. This review article includes a thorough description of the various types of biosurfactants and their production processes. The production process discussed here is from oil-contaminated waste, agro-industrial waste, dairy, and sugar industry waste, and also how biosurfactants can be produced from animal fat. Various purification methods such as ultrafiltration, liquid-liquid extraction, acid precipitation, foam fraction, and adsorption are required to acquire a purified product, which is necessary in the pharmaceutical industry, are also discussed here. Alternative ways for large-scale production of biosurfactants using different statistical experimental designs such as CCD, ANN, and RSM are described here. Several uses of biosurfactants, including drug delivery systems, antibacterial and antifungal agents, wound healing, and cancer therapy, are discussed. Additionally, in this review, the future challenges and aspects of biosurfactant utilization in the pharmaceutical industry and how to overcome them are also discussed.

Enhanced Solubilization and Biodegradation of HMW-PAHs in Water with a Pseudomonas mosselii-Released Biosurfactant

The treatment and reuse of wastewater are crucial for the effective utilization and protection of global water resources. Polycyclic aromatic hydrocarbons (PAHs), as one of the most common organic pollutants in industrial wastewater, are difficult to remove due to their relatively low solubility and bioavailability in the water environment. However, biosurfactants with both hydrophilic and hydrophobic groups are effective in overcoming these difficulties. Therefore, a biosurfactant-producing strain Pseudomonas mosselii MP-6 was isolated in this study to enhance the bioavailability and biodegradation of PAHs, especially high-molecular-weight PAHs (HMW-PAHs). FTIR and LC-MS analysis showed that the MP-6 surfactant belongs to rhamnolipids, a type of biopolymer, which can reduce the water surface tension from 73.20 mN/m to 30.61 mN/m at a critical micelle concentration (CMC = 93.17 mg/L). The enhanced solubilization and biodegradation of PAHs, particularly HMW-PAHs (when MP-6 was introduced), were also demonstrated in experiments. Furthermore, comprehensive environmental stress tolerance tests were conducted to confirm the robustness of the MP-6 biosurfactant, which signifies the potential adaptability and applicability of this biosurfactant in diverse environmental remediation scenarios. The results of this study, therefore, have significant implications for future applications in the treatment of wastewater containing HMW-PAHs, such as coking wastewater.

Reverse Micellar Dyeing of Cotton Fabric with Reactive Dye Using Biodegradable Non-Ionic Surfactant as Nanoscale Carrier: An Optimisation Study by One-Factor-at-One-Time Approach

This study investigates the feasibility of using biodegradable secondary alcohol ethoxylate (SAE) non-ionic surfactant as a building block for the formation of reverse micelles, functioning as reactive dye carriers for the dyeing of cotton fabric in non-aqueous octane medium. Ten dyeing parameters were optimised, by a one-factor-at-a-time approach, namely: (i) effect of colour fixation agent; (ii) surfactant-to-water mole ratio; (iii) surfactant-to-co-surfactant mole ratio; (iv) volume of soda ash; (v) volume of dye; (vi) solvent-to-cotton ratio; (vii) dyeing temperature; (viii) dyeing time; (ix) fixation time; (x) soda-ash-to-cotton ratio. The colour properties, fastness properties and physical properties of SAE-dyed samples were experimentally compared with the conventional water-dyed samples. The optimised condition was found when SAE samples were dyed as follows: (a) 1:20 surfactant-to-water ratio; (b) 1:8 surfactant-to-co-surfactant ratio; (c) 10:1 solvent ratio; (d) 40 min dyeing time; (e) 60 min fixation time; and (f) 70 °C dyeing and fixation temperature. The results showed that SAE-dyed samples have better colour strength, lower reflectance percentage and comparable levelness, fastness and physical properties than that of water-dyed samples. SEM images revealed that the dyed cotton fibres had no severe surface damage caused by an SAE-based reverse micellar dyeing system. The TEM image depicts that the reverse micelle was of nanoscale, spherical-shaped and had a core-shell structure, validating the presence of reverse micelle as a reactive dye carrier and the potential of an SAE-based reverse micellar system for dyeing of cotton fabrics.

Microbial surfactants: characteristics, production and broader application prospects in environment and industry

Microbial surfactants are green molecules with high surface activities having the most promising advantages over chemical surfactants including their ability to efficiently reducing surface and interfacial tension, nontoxic emulsion-based formulations, biocompatibility, biodegradability, simplicity of preparation from low cost materials such as residual by-products and renewable resources at large scales, effectiveness and stabilization under extreme conditions and broad spectrum antagonism of pathogens to be part of the biocontrol strategy. Thus, biosurfactants are universal tools of great current interest. The present work describes the major types and microbial origin of surfactants and their production optimization from agro-industrial wastes in the batch shake-flasks and bioreactor systems through solid-state and submerged fermentation industries. Various downstream strategies that had been developed to extract and purify biosurfactants are discussed. Further, the physicochemical properties and functional characteristics of biosurfactants open new future prospects for the development of efficient and eco-friendly commercially successful biotechnological product compounds with diverse potential applications in environment, industry, biomedicine, nanotechnology and energy-saving technology as well.

In vitro nematicidal and acaricidal effect of biosurfactants produced by Bacillus against the root-knot nematode Nacobbus aberrans and the dust mite Tyrophagus putrescentiae

In the present study, the nematicidal and acaricidal activity of three biosurfactants (BS) produced by strains of the Bacillus genus was evaluated. The BS produced by the Bacillus ROSS2 strain presented a mortality of 39.29% in juveniles (J2) of Nacobbus aberrans at a concentration of 30 mg/mL, this same strain is the one that presented the highest mortality in Tyrophagus putrescentiae, which was 57.97% at a concentration of 39 mg/mL. The BS were qualitatively identified by thin layer chromatography and are lipid in nature based on the retention factor (Rf). While the GC-MS analysis identified two main compounds that are 4,7-Methano-1H-indene-2,6-dicarboxylic acid, 3a,4,7,7a-tetrahydro-1, and Methyl 4-(pyrrol-1-yl)-1,2,5-oxadiazole-3-carboxylate1, which is the polar part indicated by the presence of dicarboxylic acid and carboxylate groups; while the non-polar portion can be interpreted as a hydrocarbon chain of variable length. Based on the present results, BS can be an alternative for the biocontrol of the root-knot nematode N. aberrans and the mite T. putrescentiae.

Improving Rhamnolipids Biosynthesis in Pseudomonas sp. L01 through Atmospheric and Room-Temperature Plasma (ARTP) Mutagenesis

Biosurfactants have significant applications in various industries, including microbial-enhanced oil recovery (MEOR). While the state-of-the-art genetic approaches can generate high-yield strains for biosurfactant production in fermenters, there remains a critical challenge in enhancing biosurfactant-producing strains for use in natural environments with minimal ecological risks. The objectives of this work are enhancing the strain's capacity for rhamnolipids production and exploring the genetic mechanisms for its improvement. In this study, we employed atmospheric and room-temperature plasma (ARTP) mutagenesis to enhance the biosynthesis of rhamnolipids in Pseudomonas sp. L01, a biosurfactant-producing strain isolated from petroleum-contaminated soil. Following ARTP treatment, we identified 13 high-yield mutants, with the highest yield of 3.45 ± 0.09 g/L, representing a 2.7-fold increase compared to the parent strain. To determine the genetic mechanisms behind the enhanced rhamnolipids biosynthesis, we sequenced the genomes of the strain L01 and five high-yield mutants. A comparative genomic analysis suggested that mutations in genes related to the synthesis of lipopolysaccharides (LPS) and the transport of rhamnolipids may contribute to the improved biosynthesis. To the best of our knowledge, this is the first instance of utilizing the ARTP approach to improve rhamnolipid production in Pseudomonas strains. Our study provides valuable insights into the enhancement of biosurfactant-producing strains and the regulatory mechanisms of rhamnolipids biosynthesis.

Optimization of the Operational Conditions to Produce Extracellular and Cell-Bound Biosurfactants by Aneurinibacillus aneurinilyticus Using Corn Steep Liquor as a Unique Source of Nutrients

The relevance of this work lies in the fact that it is the first time that corn steep liquor (CSL) has been proposed as a unique source of nutrients for producing biosurfactants in a controlled fermentation and Aneurinibacillus aneurinilyticus, isolated from CSL, has been evaluated for producing extracellular and cell-bound biosurfactants in a controlled fermentation, using secondary raw materials as a source of nutrients. In the present study, A. aneurinilyticus was inoculated into the culture medium containing sterilized CSL solutions (100–400 g L−1) and incubated using different temperatures (20–60 °C) and fermentation times (8–30 days). The dependent variables under study were the concentration of extracellular biosurfactants and cell-bound biosurfactant production in terms of critical micellar concentration (CMC), as well as the C/N ratio for cell-bound biosurfactant extracts. It was observed that CSL could increase the concentration of extracellular biosurfactants produced by A. aneurinilyticus if these were fermented during 19 days at 40 °C, using 250 g L−1 of CSL; a mean value of 6 g L−1 for extracellular biosurfactants and favorable CMC concentrations enabled the detection of cell-bound biosurfactant extracts under these conditions. Hence, these conditions could be considered optimal for producing both extracellular and cell-bound biosurfactants from CSL.

Anaerobic digestate valorization beyond agricultural application: Current status and prospects

The flourishment of anaerobic digestion emphasizes the importance of digestate valorization, which is essential in determining the benefits of the anaerobic digestion process. Recently the perception of digestate gradually shifted from waste to products to realize the concept of circular economy and maximize the benefits of digestate valorization. Land application of digestate should be the simplest way for digestate valorization, while legislation restriction and environmental issues emphasize the necessity of novel valorization methods. This review then outlined the current methods for solid/liquid digestate valorization, nutrient recovery, microalgae cultivation, and integration with biological and thermochemical processes. The novel valorization routes proposed were summarized, with their challenges and prospects being discussed. Integrating anaerobic digestion with thermochemical methods such as hydrothermal carbonization should be a promising strategy due to the potential market value of hydrochar/biochar-derived products.

Rhamnolipid Self-Aggregation in Aqueous Media: A Long Journey toward the Definition of Structure–Property Relationships

The need to protect human and environmental health and avoid the widespread use of substances obtained from nonrenewable sources is steering research toward the discovery and development of new molecules characterized by high biocompatibility and biodegradability. Due to their very widespread use, a class of substances for which this need is particularly urgent is that of surfactants. In this respect, an attractive and promising alternative to commonly used synthetic surfactants is represented by so-called biosurfactants, amphiphiles naturally derived from microorganisms. One of the best-known families of biosurfactants is that of rhamnolipids, which are glycolipids with a headgroup formed by one or two rhamnose units. Great scientific and technological effort has been devoted to optimization of their production processes, as well as their physicochemical characterization. However, a conclusive structure–function relationship is far from being defined. In this review, we aim to move a step forward in this direction, by presenting a comprehensive and unified discussion of physicochemical properties of rhamnolipids as a function of solution conditions and rhamnolipid structure. We also discuss still unresolved issues that deserve further investigation in the future, to allow the replacement of conventional surfactants with rhamnolipids.

Basic principles for biosurfactant-assisted (bio)remediation of soils contaminated by heavy metals and petroleum hydrocarbons - A critical evaluation of the performance of rhamnolipids

Despite the fact that rhamnolipids are among the most studied biosurfactants, there are still several gaps which must be filled. The aim of this review is to emphasize and to indicate which issues should be taken into account in order to achieve efficient rhamnolipids-assisted biodegradation or phytoextraction of soils contaminated by heavy metals and petroleum hydrocarbons without harmful side effects. Four main topics have been elucidated in the review: effective concentration of rhamnolipids in soil, their potential phytotoxicity, susceptibility to biodegradation and interaction with soil microorganisms. The discussed elements are often closely associated and often overlap, thus making the interpretation of research results all the more challenging. Each dedicated section of this review includes a description of potential issues and questions, an explanation of the background and rationale for each problem, analysis of relevant literature reports and a short summary with possible application guidelines. The main conclusion is that there is a necessity to establish regulations regarding effective concentrations for rhamnolipids-assisted remediation of soil. The use of an improper concentration is the direct cause of all the other discussed phenomena.

Classical Molecular Dynamics Simulation of Glyonic Liquids: Structural Insights and Relation to Conductive Properties

Rhamnolipids are biosurfactants that have obtained wide industrial and environmental interests with their biodegradability and great surface activity. Besides their important roles as surfactants, they are found to function as a new type of glycolipid-based protic ionic liquids (ILs)─glyonic liquids (GLs). GLs are reported to have impressive physicochemical properties, especially superionic conductivity, and it was reported in experiments that specific ion selections and the fraction of water content have a strong effect on the conductivity. Also, the shape of the conductivity curve as a function of water fraction in GLs is interesting with a sharp increase first and a long plateau. We related the conductivities to the three-dimensional (3D) networks composed of -OH inside the GLs utilizing classical molecular dynamics (MD) simulations. The amount and size of these networks vary with both ion species and water fractions. Before reaching the first hydration layer, the -OH networks with higher projection/box length ratios indicate better conductivity; after reaching the first hydration layer and forming continuous structures, the conductivity retains with more water molecules participating in the continuous networks. Therefore, networks are found to be a qualitative predictor of actual conductivity. This is explained by the analysis of the atomic structures, including radial distribution function, fraction free volume, anion conformations, and hydrogen bond occupancies, of GLs and their water mixtures under different chemical conditions.

Unravelling the sponge microbiome as a promising source of biosurfactants

Microbial surfactants are particularly useful in bioremediation and heavy metal removal from soil and aquatic environments, amongst other highly valued uses in different economic and biomedical sectors. Marine sponge-associated bacteria are well-known producers of bioactive compounds with a wide array of potential applications. However, little progress has been made on investigating biosurfactants produced by these bacteria, especially when compared with other groups of biologically active molecules harnessed from the sponge microbiome. Using a thorough literature search in eight databases, the purpose of the review was to compile the current knowledge on biosurfactants from sponge-associated bacteria, with a focus on their relevant biotechnological applications. From the publications between the years 1995 and 2021, lipopeptides and glycolipids were the most identified chemical classes of biosurfactants. Firmicutes was the dominant phylum of biosurfactant-producing strains, followed by Actinobacteria and Proteobacteria. Bioremediation led as the most promising application field for the studied surface-active molecules in sponge-derived bacteria, despite the reports endorsed their use as antimicrobial and antibiofilm agents. Finally, we appoint some key strategies to instigate the research appetite on the isolation and characterization of novel biosurfactants from the poriferan microbiome.

Interdisciplinary Overview of Lipopeptide and Protein-Containing Biosurfactants

Biosurfactants are amphipathic molecules capable of lowering interfacial and superficial tensions. Produced by living organisms, these compounds act the same as chemical surfactants but with a series of improvements, the most notable being biodegradability. Biosurfactants have a wide diversity of categories. Within these, lipopeptides are some of the more abundant and widely known. Protein-containing biosurfactants are much less studied and could be an interesting and valuable alternative. The harsh temperature, pH, and salinity conditions that target organisms can sustain need to be understood for better implementation. Here, we will explore biotechnological applications via lipopeptide and protein-containing biosurfactants. Also, we discuss their natural role and the organisms that produce them, taking a glimpse into the possibilities of research via meta-omics and machine learning.

Biosurfactants' multifarious functional potential for sustainable agricultural practices

Increasing food demand by the ever-growing population imposes an extra burden on the agricultural and food industries. Chemical-based pesticides, fungicides, fertilizers, and high-breeding crop varieties are typically employed to enhance crop productivity. Overexploitation of chemicals and their persistence in the environment, however, has detrimental effects on soil, water, and air which consequently disturb the food chain and the ecosystem. The lower aqueous solubility and higher hydrophobicity of agrochemicals, pesticides, metals, and hydrocarbons allow them to adhere to soil particles and, therefore, continue in the environment. Chemical pesticides, viz., organophosphate, organochlorine, and carbamate, are used regularly to protect agriculture produce. Hydrophobic pollutants strongly adhered to soil particles can be solubilized or desorbed through the usage of biosurfactant/s (BSs) or BS-producing and pesticide-degrading microorganisms. Among different types of BSs, rhamnolipids (RL), surfactin, mannosylerythritol lipids (MELs), and sophorolipids (SL) have been explored extensively due to their broad-spectrum antimicrobial activities against several phytopathogens. Different isoforms of lipopeptide, viz., iturin, fengycin, and surfactin, have also been reported against phytopathogens. The key role of BSs in designing and developing biopesticide formulations is to protect crops and our environment. Various functional properties such as wetting, spreading, penetration ability, and retention period are improved in surfactant-based formulations. This review emphasizes the use of diverse types of BSs and their source microorganisms to challenge phytopathogens. Extensive efforts seem to be focused on discovering the innovative antimicrobial potential of BSs to combat phytopathogens. We discussed the effectiveness of BSs in solubilizing pesticides to reduce their toxicity and contamination effects in the soil environment. Thus, we have shed some light on the use of BSs as an alternative to chemical pesticides and other agrochemicals as sparse literature discusses their interactions with pesticides. Life cycle assessment (LCA) and life cycle sustainability analysis (LCSA) quantifying their impact on human activities/interventions are also included. Nanoencapsulation of pesticide formulations is an innovative approach in minimizing pesticide doses and ultimately reducing their direct exposures to humans and animals. Some of the established big players and new entrants in the global BS market are providing promising solutions for agricultural practices. In conclusion, a better understanding of the role of BSs in pesticide solubilization and/or degradation by microorganisms represents a valuable approach to reducing their negative impact and maintaining sustainable agricultural practices.

Utilization of surface-active compounds derived from biosolids to remediate polycyclic aromatic hydrocarbons contaminated sediment soil

In the present study, surface-active compounds (SAC) were extracted from biosolids using an alkaline treatment process. They were tested for their remediation efficiency of crude oil-contaminated sediment soil and was compared with Triton x-100. The SAC exhibited a similar soil washing efficiency to that of the commercial Triton x-100, and under the optimized soil washing parameters, SAC exhibited a maximum of 91% total polycyclic aromatic hydrocarbons removal. Further, on analysing the toxicity of the soil residue after washing, it was observed that SAC from biosolids washed soil exhibited an average of 1.5-fold lesser toxicity compared to that of Triton x-100 on different test models-earthworm, a monocot, and dicot plants. The analysis of the key soil parameters revealed that the commercial surfactant reduced the soil organic matter and porosity by an average of 1.3-fold compared to SAC. Further, the ability of surfactants to induce toxicity was confirmed by the adsorption of the surfactants on the surface of the soil particles which was in the order of Triton x-100 > SAC. Thus, this study suggests that SAC can be applied as an effective bioremediation approach for contaminated soil for a greener and sustainable ecosystem.

Polycyclic aromatic hydrocarbons remobilization from contaminated porous media by (bio)surfactants washing

Biosurfactants, surface-active agents produced by microorganisms, are increasingly studied for their potential use in soil remediation processes because they are more environmentally friendly than their chemically produced homologues. In this work, we report on the use of a crude biosurfactant produced by a bacterial consortium isolated from a PAHs-contaminated soil, compared with other (bio)surfactants (Tween80, Sodium dodecyl sulfate - SDS, rhamnolipids mix), to wash PAHs from a contaminated porous media. Assays were done using columns filled with sand or sand-clay mixtures (95:5) spiked with four model PAHs. The crude biosurfactant showed less adsorption to the [sand] and the [sand + clay] columns compared to Tween 80, SDS and the rhamnolipid mix. The biosurfactant showed the second best capacity to remove PAHs from the columns (as dissolved and particulate phases), both from [sand] and [sand + clay], after SDS when applied at lower concentrations than the other sufactants. The effluent concentrations of phenanthrene (PHE), pyrene (PYR) and benzo[a]pyrene (BAP) increased in the presence of the crude biosurfactant. Compared to the control experiment using only water, the global PAHs washed mass (amount of PAHs removed from the columns) increased between 9 and 1000 times for PHE and BAP in the [sand] column, and between 55 and 6000 times respectively for PHE and BAP in the [sand + clay] columns. Moreover, in the [sand + clay] columns, leaching of a part of the clays was observed in the SDS and the biosurfactant injections assays. This clay leaching resulted in higher PAHs removal, due not to desorption but rather to particulate transport. In the context of washing PAH-contaminated soils in biopiles or subsurface remediation, our results could help in sizing the remediation approach using an environmental friendly biosurfactant, before a pump-and-treat process.

Determining the potential use of biosurfactants in preventing endodontic infections

Microbial biofilms play a dominant role in the failure of endodontic therapies. Bacterial adhesion is the first step in the establishment of biofilms, activating the host immune response leading to tissue damage. Biosurfactants are microbe-derived tensioactive molecules with latent anti-adhesive and anti-microbial activity. This study reports the extraction and characterization of a biosurfactant from Lactobacillus (L.) plantarum (Lp-BS) and investigates its anti-microbial and anti-adhesive properties compared to rhamnolipid, a commercially available biosurfactant. Lp-BS, extracted from L. plantarum during the growth phase, was characterized as a glycoprotein, able to reduce surface tension and emulsify non-polar liquids. Proteomic analysis of Lp-BS identified three bacterial adhesin-like proteins, suggesting roles in hindering bacterial adhesion. Lp-BS did not show significant anti-microbial activity against endodontic pathogens from the Streptococcus (Strep.) anginosus group or Enterococcus (Ent.) faecalis at 50 mg/ml. However, anti-adhesive activity on abiotic surfaces was observed against both Strep. anginosus and Strep. intermedius. Rhamnolipid exhibited strong anti-microbial activity, with minimum inhibitory concentrations of 0.097 mg/ml against Strep. anginosus, and 0.048 mg/ml against Strep. constellatus and Strep. intermedius, in addition to a marked anti-adhesive activity. These findings offer preliminary evidence for the potential application of biosurfactants as an anti-microbial and/or anti-adhesive pharmacotherapy in endodontics.

Exploring bacterial communities through metagenomics during bioremediation of polycyclic aromatic hydrocarbons from contaminated sediments

The goal of this study was to evaluate the degradation effectiveness of PAHs degrading bacteria at the mesocosm level, including Stenotrophomonas maltophilia (SC), mixed culture (MC), and enriched native microflora (EC) at the mesocosm level. Maximum degradation was found in the mesocosm MC (26.67 %), followed by SC (25.08 %) and EC (18.25 %) after 60 days. Thus, mixed culture and Stenotrophomonas maltophilia could be a game changer in the PAHs bioremediation at the chronically contaminated sites. MiSeq sequencing has revealed dominancy of γ-Proteobacteria, α-Proteobacteria, β-Proteobacteria at class level and Sphingomonadales, oceanospirillales, Rhodothermales at Order level. Families Alcanivoracaceae, Alteromonadaceae, Nocardiaceae, Rhodospirillaceae and genus Stenotrophomonas, Alcanivorax, Methylophaga, Fluviicola and Rhodoplanes were considerably increased which play key role in the PAHs degradation. Dominant bacterial communities have revealed resilience community to enable potential PAHs degradation process in all the mesocosms. To the best our knowledge this is the first ever attempt in PAHs biodegradation study conducted at the mesocosm level mimicking natural environmental conditions. Consequently, this study could be a benchmark against which future progress studies for the policy makers and stakeholders to design appropriate bioremediation study for the historically PAHs polluted contaminate sites.

Prospective review on bioelectrochemical systems for wastewater treatment: Achievements, hindrances and role in sustainable environment

Bioelectrochemical systems (BESs) are a relatively new arena for producing bioelectricity, desalinating sea water, and treating industrial effluents by removing organic matter. Microbial electrochemical technologies (METs) are promising for obtaining value-added products during simultaneous remediation of pollutants from wastewater. The search for more affordable desalination technology has led to the development of microbial desalination cells (MDCs). MDC combines the operation of microbial fuel cells (MFC) with electrodialysis for water desalination and energy generation. It has received notable interest of researchers in desalination and wastewater treatment because of low energy requirement and eco-friendly nature. Firstly, this article provides a brief overview of MDC technology. Secondly, factors affecting functioning of MDC and its applications have been accentuated. Additionally, challenges and future outlook on the development of this technology have been delineated. State-of-the-art information provided in this review would expand the scope of interdisciplinary and translational research.

New Insights in factors affecting ground water quality with focus on health risk assessment and remediation techniques

Groundwater is considered as the primary source of water for the majority of the world's population. The preponderance of the nation's drinking water, as well as agricultural and industrial water, comes from groundwater. Groundwater level is becoming increasingly challenging to replenish due to climate change. Fertilizer application and improper processing of industrial waste are the two major anthropogenic drivers of groundwater pollution. Arsenic and cadmium are two of the principal heavy metal pollutants that have affected groundwater quality by human activity. When people are exposed to both non-carcinogenic and carcinogenic contaminants for an extended period, toxic effects might occur. It can have detrimental health effects from long-term exposure to contaminants, even in low amounts. As a result, metal contamination concentrations and fractions can be used to determine potential health concerns. At the same time, contaminants also need to be removed or converted to harmless products by groundwater remediation. Remediation of groundwater quality can be accomplished in several ways, including natural and artificial means. The purpose of this review is to explore a wide range of factors that affect groundwater quality, including their possible health effects. This communication provides state-of-the-art information about remediation approaches for groundwater contamination including hindrances and perspectives in this area of research. The in-depth information provided in different sections of this communication would expand the scope of interdisciplinary research.

Bioreactor-scale production of rhamnolipids from food waste digestate and its recirculation into anaerobic digestion for enhanced process performance: Creating closed-loop integrated biorefinery framework

Reaching industrially relevant productivities in bioprocesses and their efficient integration in the existing industrial infrastructure remain as important challenges in the circular economy to create closed loop sustainability framework. Using anaerobic digestion (AD) biorefinery as a model, the present work addressed these problems via integration of next-generation rhamnolipids production with AD. A high rhamnolipids concentration of 10.25 ± 1.34 g/L was obtained by fed-batch fermentation using food waste digestate as medium. Digestate-derived rhamnolipids contained Rha-C₁₀-C₁₀ and Rha-Rha-C₁₀-C₁₀ as the predominant congeners. These were used back in single-phase AD to demonstrate their effect on sludge solubilization and digestion efficiency. A dosage of 0.02 g rhamnolipids/g total suspended solids was found to be optimal which enhanced the hydrolysis-acidogenesis reactions to up to 27% over control. It however retarded methane production which could be overcome by the prolongation of digestion time. Finally, the value chain appreciation by the proposed process was demonstrated by a feasibility analysis.

Microbial surfactants: A journey from fundamentals to recent advances

Microbial surfactants are amphiphilic surface-active substances aid to reduce surface and interfacial tensions by accumulating between two fluid phases. They can be generically classified as low or high molecular weight biosurfactants based on their molecular weight, whilst overall chemical makeup determines whether they are neutral or anionic molecules. They demonstrate a variety of fundamental characteristics, including the lowering of surface tension, emulsification, adsorption, micelle formation, etc. Microbial genera like Bacillus spp., Pseudomonas spp., Candida spp., and Pseudozyma spp. are studied extensively for their production. The type of biosurfactant produced is reliant on the substrate utilized and the pathway pursued by the generating microorganisms. Some advantages of biosurfactants over synthetic surfactants comprise biodegradability, low toxicity, bioavailability, specificity of action, structural diversity, and effectiveness in harsh environments. Biosurfactants are physiologically crucial molecules for producing microorganisms which help the cells to grasp substrates in adverse conditions and also have antimicrobial, anti-adhesive, and antioxidant properties. Biosurfactants are in high demand as a potential product in industries like petroleum, cosmetics, detergents, agriculture, medicine, and food due to their beneficial properties. Biosurfactants are the significant natural biodegradable substances employed to replace the chemical surfactants on a global scale in order to make a cleaner and more sustainable environment.

Sustainable strategies for combating hydrocarbon pollution: Special emphasis on mobil oil bioremediation

The global rise in industrialization and vehicularization has led to the increasing trend in the use of different crude oil types. Among these mobil oil has major application in automobiles and different machines. The combustion of mobil oil renders a non-usable form that ultimately enters the environment thereby causing problems to environmental health. The aliphatic and aromatic hydrocarbon fraction of mobil oil has serious human and environmental health hazards. These components upon interaction with soil affect its fertility and microbial diversity. The recent advancement in the omics approach viz. metagenomics, metatranscriptomics and metaproteomics has led to increased efficiency for the use of microbial based remediation strategy. Additionally, the use of biosurfactants further aids in increasing the bioavailability and thus biodegradation of crude oil constituents. The combination of more than one approach could serve as an effective tool for efficient reduction of oil contamination from diverse ecosystems. To the best of our knowledge only a few publications on mobil oil have been published in the last decade. This systematic review could be extremely useful in designing a micro-bioremediation strategy for aquatic and terrestrial ecosystems contaminated with mobil oil or petroleum hydrocarbons that is both efficient and feasible. The state-of-art information and future research directions have been discussed to address the issue efficiently.

Bacteria Halotolerant from Karst Sinkholes as a Source of Biosurfactants and Bioemulsifiers

Halotolerant bacteria with biosurfactant (BS) and bioemulsifiers (BE) activity can coexist in Karstic sinkholes with marine influence. Two sinkholes in the Yucatan peninsula were selected to isolate bacteria with BE and BS activity stable in NaCl. The optimal time, the effect of nitrogen and carbon source in the medium, and the conditions (agitation, pH and salinity) for the production of BS and BE compounds in planktonic and sessile (stimulate the formation of biofilms in cell roller) culture were determined. Eighty strains showed the highest emulsification activity (EI24 ≥ 50%) and drop-collapse ≥ 4 mm. 87% of the strains are moderately halotolerant, and 21% bordered the limit of extreme halotolerance. Twenty-four strains maintained or improved their BS and BE activity under salinity conditions at 5% and 10%, being the most active genera Bacillus, Paenibacillus and Lysinibacillus, identified by sequencing of the 16S rRNA gene. The results show that the nitrogen source positively affects the BS and BE activity, regardless of the type of culture. The sessile culture markedly stimulated BS activity with significant differences. However, we did not find a greater influence on the culture conditions. The results suggest that halotolerant bacteria from sinkholes could be implemented in bioremediation and other biotechnological applications.

Achieving “Non-Foaming” Rhamnolipid Production and Productivity Rebounds of Pseudomonas aeruginosa under Weakly Acidic Fermentation

The rhamnolipid production of Pseudomonas aeruginosa has been impeded by its severe foaming; overcoming the bottleneck of foaming has become the most urgent requirement for rhamnolipid production in recent decades. In this study, we performed rhamnolipid fermentation under weakly acidic conditions to address this bottleneck. The results showed that the foaming behavior of rhamnolipid fermentation broths was pH-dependent with the foaming ability decreasing from 162.8% to 28.6% from pH 8 to 4. The “non-foaming” rhamnolipid fermentation can be realized at pH 5.5, but the biosynthesis of rhamnolipids was significantly inhibited. Further, rhamnolipid yield rebounded from 8.1 g/L to 15.4 g/L after ultraviolet and ethyl methanesulfonate compound mutagenesis. The mechanism study showed that the species changes of rhamnolipid homologs did not affect the foaming behavior of the fermentation but had a slight effect on the bioactivity of rhamnolipids. At pH 8.0 to 5.0, increased surface tension, decreased viscosity and zeta potential, and aggregation of rhamnolipid molecules contributed to the “non-foaming” rhamnolipid fermentation. This study provides a promising avenue for the “non-foaming” rhamnolipid fermentation and elucidates the mechanisms involved, facilitating the understanding of pH-associated foaming behavior and developing a more efficient strategy for achieving rhamnolipid production.

Characterization of the Thermostable Biosurfactant Produced by Burkholderia thailandensis DSM 13276

Biosurfactants synthesized by microorganisms represent safe and sustainable alternatives to the use of synthetic surfactants, due to their lower toxicity, better biodegradability and biocompatibility, and their production from low-cost feedstocks. In line with this, the present study describes the physical, chemical, and functional characterization of the biopolymer secreted by the bacterium Burkholderia thailandensis DSM 13276, envisaging its validation as a biosurfactant. The biopolymer was found to be a glycolipopeptide with carbohydrate and protein contents of 33.1 ± 6.4% and 23.0 ± 3.2%, respectively. Galactose, glucose, rhamnose, mannose, and glucuronic acid were detected in the carbohydrate moiety at a relative molar ratio of 4:3:2:2:1. It is a high-molecular-weight biopolymer (1.0 × 107 Da) with low polydispersity (1.66), and forms aqueous solutions with shear-thinning behavior, which remained after autoclaving. The biopolymer has demonstrated a good emulsion-stabilizing capacity towards different hydrophobic compounds, namely, benzene, almond oil, and sunflower oil. The emulsions prepared with the biosurfactant, as well as with its autoclaved solution, displayed high emulsification activity (>90% and ~50%, respectively). Moreover, the almond and sunflower oil emulsions stabilized with the biosurfactant were stable for up to 4 weeks, which further supports the potential of this novel biopolymer for utilization as a natural bioemulsifier.

Optimization of Lipopeptide Biosurfactant Production by Salibacterium sp. 4CTb in Batch Stirred-Tank Bioreactors

Halophilic microorganisms are potentially capable as platforms to produce low-cost biosurfactants. However, the robustness of bioprocesses is still a challenge and, therefore, it is essential to understand the effects of microbiological culture conditions through bioreactor engineering. Based on a design of experiments (DOE) and a response surface methodology (RSM) tailored and taken from the literature, the present work focuses on the evaluation of a composite central design (CCD) under batch cultures in stirred-tank bioreactors with the halophilic bacteria Salibacterium sp. 4CTb in order to determine the operative conditions that favor mass transfer and optimize the production of a lipopeptide. The results obtained showed profiles highlighting the most favorable culture conditions, which lead to an emulsification index (E₂₄%) higher than 70%. Moreover, through the behavior of dissolved oxygen (DO), it was possible to experimentally evaluate the higher volumetric coefficient of mass transfer in the presence of lipopeptide (k_La = 31 1/h) as a key criterion for the synthesis of the biosurfactant on further cell expansion.

Predicting performance of in-situ microbial enhanced oil recovery process and screening of suitable microbe-nutrient combination from limited experimental data using physics informed machine learning approach

Screening of suitable microbe-nutrient combination and prediction of oil recovery at the initial stage is essential for the success of Microbial Enhanced Oil Recovery (MEOR) technique. However, experimental and physics-based modelling approaches are expensive and time-consuming. In this study, Physics Informed Machine Learning (PIML) framework was developed to screen and predict oil recovery at a relatively lesser time and cost with limited experimental data. The screening was done by quantifying the influence of parameters on oil recovery from correlation and feature importance studies. Results revealed that microbial kinetic, operational and reservoir parameters influenced the oil recovery by 50%, 32.6% and 17.4%, respectively. Higher oil recovery is attained by selecting a microbe-nutrient combination having a higher ratio of value between biosurfactant yield and microbial yield parameters, as they combinedly influence the oil recovery by 27%. Neural Network is the best ML model for MEOR application to predict oil recovery (R²≈0.99).

Rhamnolipids produced under aerobic/anaerobic conditions: Comparative analysis and their promising applications

This research comprises a comparative study of the properties, rhl genes expression, and structural difference in rhamnolipids produced under different oxygen conditions via Pseudomonas sp. CH1. The critical micelle concentration (CMC) of rhamnolipids produced under aerobic conditions (RAO) was 100 mg/L. In contrast, rhamnolipids produced under anaerobic conditions (RNO) had a low CMC of 40 mg/L. RNO comprised six rhamnolipids homologs, and the proportion of mono-rhamnolipids was up to 87.83%; meanwhile, the percent ratio of di-rhamnolipids and mono-rhamnolipids in RAO was 63.1:36.9. Additionally, diversified applications for solubilization of hydrophobic pollutants and reduction in heavy oil viscosity were investigated. The addition of RNO greatly enhanced the solubility of phenanthrene in water, from 1.29 mg/L to 193.14 mg/L, a 148.7-fold increase. Moreover, the viscosity of heavy oil decreased by over 90% for both kinds of rhamnolipids, whereas RAO effectively reduced the viscosity even at a low temperature (10 °C). The findings of this study provide insights into the versatile potential applications of rhamnolipids produced under different oxygen conditions.

Application of Rhamnolipids as Dispersing Agents for the Fabrication of Composite MnO2-Carbon Nanotube Electrodes for Supercapacitors

The high theoretical capacitance of MnO₂ renders it a promising material for the cathodes of asymmetric supercapacitors. The good dispersion of MnO₂ and conductive additives in a nanocomposite electrode is a key factor for efficient electrode performance. This article describes, for the first time, the application of rhamnolipids (RL) as efficient natural biosurfactants for the fabrication of nanocomposite MnO₂-carbon nanotube electrodes for supercapacitors. RL act as co-dispersants for MnO₂ and carbon nanotubes and facilitate their efficient mixing, which allows for advanced capacitive properties at an active mass of 40 mg cm⁻² in Na₂SO₄ electrolytes. The highest capacitance obtained from the cyclic voltammetry data at a scan rate of 2 mV s⁻¹ is 8.10 F cm⁻² (202.6 F g⁻¹). The highest capacitance obtained from the galvanostatic charge–discharge data at a current density of 3 mA cm⁻² is 8.65 F cm⁻² (216.16 F g⁻¹). The obtained capacitances are higher than the capacitances of MnO₂-based electrodes of the same active mass reported in the literature. The approach developed in this investigation is simple compared to other techniques used for the fabrication of electrodes with high active mass. It offers advantages of using a biocompatible RL biosurfactant.

Study on the Effect of Petroleum Components on the Elution of Oily Sludge by a Compound Biosurfactant

Currently, research on oily sludge treatment mainly focuses on optimizing the deoiling effect and research on the deoiling mechanism, and the influence of petroleum components on the properties and treatment of oily sludge is rarely considered. Therefore, in this study, petroleum substances in three types of oil sludge were eluted using the biosurfactant cleaning technology, and the influence of petroleum components on the cleaning process was explored. The results showed that the biosurfactants rhamnolipid and sophorolipid had a synergistic effect, and the oil-removal rate was as high as 92.2% when the SL mass fraction was 0.4 in the compound biosurfactant. Three types of oily sludge, wellsite-landing sludge, pipeline-landing sludge, and tank-bottom sludge, were cleaned by the compound biosurfactant; the results showed that the residual petroleum substance in liquid and solid phases, the turbidity value, and the zeta-potential value of the supernatant of oil sludge samples after cleaning increased with the increase in the heavy components of the oily sludge, and the oil-removal rate decreased gradually. After cleaning, the average relative molecular weight of the three oil phases increased with the heavy components, which was increased by 1.83, 4.83, and 10.72%, respectively, and the increase in molecular weight increased the difficulty of cleaning. After cleaning, the retention time and peak intensity of the oil sample changed significantly, and it had a stronger elution effect on low-molecular-weight alkanes. It was found that the compound biosurfactant had a good elution effect on polycyclic aromatic hydrocarbons, but the increase in the content of heavy components and the increase in aromatic rings increased the difficulty of cleaning. Moreover, it was found that the compound biosurfactant could not completely elute the petroleum substances on the surface of solid particles, and the asphaltene components in the oil phase were more difficult to elute than other components.