Physiological responses and accumulation ability of Microcystis aeruginosa to zinc and cadmium: Implications for bioremediation of heavy metal pollution

Concurrent manipulation of competitive mechanisms to construct glutathione-stabilized gold nanocluster-based dual-channel molecular classifier for metal ions detection and information steganography

Understanding charge transport in metal ion-mediated glutathione-stabilized gold nanoclusters (GSH-Au NCs) has proved difficult due to the presence of various competitive mechanisms, such as electron transfer (ET) and aggregation induction effect (AIE). In this paper, we present a dual-channel fluorescence (FL) and second-order Rayleigh scattering (SRS) sensing method for high-throughput classification of metal ions, relying on the competition between ET and AIE using GSH-Au NCs. The SRS signals show significant enhancement when Pb2+, Ag+, Al3+, Cu2+, Fe3+, and Hg2+ are present, as a result of the aggregation of GSH-Au NCs. Notably, the fluorescence signal exhibits the opposite trend. The FL intensities of GSH-Au NCs are enhanced by Pb2+, Ag+, and Al3+ through the AIE mechanism, while they are quenched by Cu2+, Fe3+, and Hg2+, which is dominated by the ET mechanism. By employing principal component analysis and hierarchical cluster analysis, these signals are transformed into unique fingerprints and Euclidean distances, respectively, enabling successful distinction of six metal ions and their mixtures with a low detection limit of 30 nM. This new strategy has successfully addressed interference from impurities in the testing of real water samples, demonstrating its strong ability to detect multiple metal ions. Impressively, we have achieved molecular cryptosteganography, which involves encoding, storing, and concealing information by transforming the selective response of GSH-Au NCs to binary strings. This research is anticipated to advance utilization of nanomaterials in logic sensing and information safety, bridging the gap between molecular sensors and information systems.

The biomolecules of Euglena gracilis: Harnessing biology for natural solutions to future problems

Over the past decade, the autotrophic and heterotrophic protist Euglena gracilis (E. gracilis) has gained popularity across the studies of environmental science, biosynthesis experiments, and nutritional substitutes. The unique physiology and versatile metabolism of E. gracilis have been a recent topic of interest to many researchers who continue to understand the complexity and possibilities of using E. gracilis biomolecule production. In this review, we present a comprehensive representation of recent literature outlining the various uses of biomolecules derived from E. gracilis across the fields of natural product biosynthesis, as a nutritional substitute, and as bioremediation tools. In addition, we highlight effective strategies for altering metabolite production using abiotic stressors and growth conditions. To better understand metabolite biosynthesis and its role in E. gracilis, integrated studies involving genomics, metabolomics, and proteomics should be considered. Together, we show how the ongoing advancements in E. gracilis related research continue to broaden applications in the biosynthetic sector and highlight future works that would strengthen our understanding of overall Euglena metabolism.

Enhancing the phytoremediation efficiency of Bacopa monnieri (L.) Wettst. using LED lights: a sustainable approach for heavy metal pollution control

In this study, the impacts of LEDs on the phytoremediation of arsenic (As) and mercury (Hg) by Bacopa monnieri (L.) Wettst. were investigated, along with the examination of the biochemical characteristics of plants exposed to metal-induced toxicity. In vitro multiple and rapid plant propagations were successfully achieved by adding 1.0 mg/L 6-Benzyl amino purine (BAP) to the Murashige and Skoog (MS) basal salt and vitamin culture medium. For plant-based remediation experiments, different concentrations of As (0-1.0 mg/L) and Hg (0-0.2 mg/L) were added to the water environment, and trials were conducted for four different application periods (1-21 days). White, red, and blue LEDs, as well as white fluorescent light, were preferred as the light environment. The results revealed that LED lights were more effective for heavy metal accumulation, with red LED light significantly enhancing the plant's phytoremediation capacity compared to other LED applications. Moreover, when examining biochemical stress parameters such as levels of photosynthetic pigments, protein concentrations, and lipid peroxidation, plants under red LED light showed better results. Generally, the lowest results were obtained under white fluorescent light. These findings contribute to phytoremediation studies by highlighting the integration of LED lights, thereby enabling the development of a more effective, cost-efficient, and environmentally sustainable remediation system compared to other treatment methods.

Selenium and its nanoparticles modulate the metabolism of reactive oxygen species and morpho-physiology of wheat (Triticum aestivum L.) to combat oxidative stress under water deficit conditions

BACKGROUND

Wheat (Triticum aestivum L.) is one of the most important cereal crop species worldwide, but its growth and development are adversely influenced by drought stress. However, the application of trace elements is known to improve plant physiology under water-limited conditions. In this study, the effects of drought stress on wheat plants were investigated, with a focus on potential mitigation by foliar application of selenium nanoparticles (Se(np)) and sodium selenate (Na2SeO4). The experiment was conducted in a net house using a completely randomized design with four replications. The treatments involved three levels of drought stress (mild, moderate, and severe) started at 30 days after sowing (DAS), with foliar sprays of Se(np) and Se (both 25 µM) initiated at 27 DAS and repeated 4 times at 7-day intervals until 55 DAS.

RESULTS

Drought stress significantly reduced plant growth, whereas Se(np) and Se sprays enhanced it. Drought stress induced chlorophyll degradation, increased malondialdehyde and hydrogen peroxide levels, impaired membrane stability, and caused electrolyte leakage. Severe drought stress reduced the levels of antioxidants (e.g., proline, ascorbate, and glutathione by 4.18-fold, 80%, and 45%) and the activities of antioxidant enzymes (ascorbate peroxidase, dehydroascorbate reductase, and others). Conversely, treatment with Se(np) and Se restored these parameters, for example, 1.23-fold higher total chlorophyll content with Se(np) treatment, 26% higher APX activity with Se treatment, 15% lower electrolyte leakage with Se treatment in wheat plants under severe drought stress. This Se-associated enhancement facilitated rapid scavenging of reactive oxygen species and reduced methylglyoxal toxicity, thereby diminishing oxidative stress and positively affecting the morphophysiological and biochemical responses of the plants under drought.

CONCLUSIONS

Drought-stressed wheat plants exhibited reductions in physiological processes, including water uptake and photosynthetic activity. However, Se(np) and Se applied at 25 µM mitigated the detrimental effects of drought. The application of Se(np) was notably more effective than the application of Se in mitigating drought stress, indicating the potential of the application of Se(np) as a sustainable agricultural practice under water-limited conditions.

Effect of surfactant's charge properties on behavior, physiology, and biochemistry and the release of microcystins of Microcystis aeruginosa

Surfactant pollution is escalatitheng in eutrophic waters, but the effect of surfactant charge properties on the physiological and biochemical properties of toxin-producing microalgae remains inadequately explored. To address this gap, this study explores the effects and mechanisms of three common surfactants-cetyltrimethylammonium bromide (CTAB, cationic), sodium dodecyl sulfate (SDS, anionic), and Triton X-100 (nonionic)-found in surface waters, on the agglomeration behavior, physiological indicators, and Microcystin-LR (MC-LR) release of Microcystis aeruginosa (M. aeruginosa) by using UV-visible spectroscope, Malvern Zetasizer, fluorescence spectrometer, etc. Results suggest that charge properties significantly affect cyanobacterial aggregation and cellular metabolism. The CTAB-treated group demonstrates a ∼5.74 and ∼9.74 times higher aggregation effect compared to Triton X-100 and SDS (300 mg/L for 180 min) due to strong electrostatic attraction. Triton X-100 outperforms CTAB and SDS in polysaccharide extraction, attributed to its higher water solubility and lower critical micelle concentration. CTAB stimulates cyanobacteria to secrete proteins, xanthohumic acid, and humic acids to maintain normal physiological cells. Additionally, the results of SEM and ion content showed that CTAB damages the cell membrane, resulting in a ∼90% increase in the release of intracellular MC-LR without cell disintegration. Ionic analyses confirm that all three surfactants alter cell membrane permeability and disrupt ionic metabolic pathways in microalgae. This study highlights the relationship between the surface charge properties of typical surfactants and the dispersion/agglomeration behavior of cyanobacteria. It provides insights into the impact mechanism of exogenous surfactants on toxic algae production in eutrophic water bodies, offering theoretical references for managing surfactant pollution and treating algae blooms.

Neo-construction of a SO2-tunable near-infrared ratiometric fluorescent probe for high-fidelity diagnosis and evaluation hazards of Cd2+-induced liver injury

Cadmium-contaminated water and food are seriously hazardous to the human health, especially liver injury. To understand the entanglement relationship between cadmium ion (Cd2+)-induced liver injury and the biomarker sulfur dioxide (SO2), a reliable bioanalytical tool is urgently needed, detecting SO2 to diagnose and evaluate the extent of liver injury in vivo. Herein, based on the Förster resonance energy transfer (FRET) mechanism, a novel SO2-tunable NIR ratiometric fluorescent probe (SMP) was developed, it was used to diagnose and treat liver injury induced by Cd2+ in biosystems. Specifically, it was constructed by conjugating a NIR dicyanoisophorone with a NIR benzopyranate as the donor and acceptor, respectively, and the ratiometric response of SO2- regulated by the Michael addition reaction. In addition, SMP exhibits rapid reaction time (<15 s), two well-resolved emission peaks (68 nm) with less cross-talk between channels for high imaging resolution, superior selectivity, and low limit of detection (LOD=80.3 nM) for SO2 detection. Impressively, SMP has been successfully used for intracellular ratiometric imaging of Cd2+-induced SO2 and diagnostic and therapeutic evaluation in liver injury mice models with satisfactory results. Therefore, SMP may provide a powerful molecular tool for revealing the occurrence and development relationship between SO2 and Cd2+-induced liver injury. ENVIRONMENTAL IMPLICATION: Cadmium ions are one of the well-known toxic environmental pollutants, which are enriched in the human body through inhalation of cadmium-contaminated air or from the food chain, leading to damage in various organs, especially liver injury. Therefore, we developed a novel fluorescent probe that can specifically detect SO2 in Cd2+-induced liver injury, which is critically important for the diagnosis and evaluation of Cd2+-induced liver injury diseases. The specific detection of SO2 of this probe has been successfully demonstrated in live HepG2 cells and Cd2+-induced liver injury mice.

Exogenous GABA supplementation to facilitate Cr (III) tolerance and lipid biosynthesis in Chlorella sorokiniana

Microalgae possess the prospective to be efficiently involved in bioremediation and biodiesel generation. However, conditions of stress often restrict their growth and diminish different metabolic processes. The current study evaluates the potential of GABA to improve the growth of the microalga Chlorella sorokiniana under Cr (III) stress through the exogenous administration of GABA. The research also investigates the concurrent impact of GABA and Cr (III) stress on various metabolic and biochemical pathways of the microalgae. In addition to the control, cultures treated with Cr (III), GABA, and both Cr (III) and GABA treated were assessed for accurately analysing the influence of GABA. The outcomes illustrated that GABA significantly promoted growth of the microalgae, resulting in higher biomass productivity (19.14 mg/L/day), lipid productivity (3.445 mg/L/day) and lipid content (18%) when compared with the cultures under Cr (III) treatment only. GABA also enhanced Chl a content (5.992 μg/ml) and percentage of protein (23.75%). FAMEs analysis by GC-MS and total lipid profile revealed that GABA treatment can boost the production of SFA and lower the level of PUFA, a distribution ideal for improving biodiesel quality. ICP-MS analysis revealed that GABA supplementation could extend Cr (III) mitigation level up to 97.7%, suggesting a potential strategy for bioremediation. This novel study demonstrates the merits of incorporating GABA in C. sorokiniana cultures under Cr (III) stress, in terms of its potential in bioremediation and biodiesel production without disrupting the pathways of photosynthesis and protein production.

Effects of micro-sized biodegradable plastics on Microcystis aeruginosa

Plethora of plastics are being used in current society, generating huge amounts of plastic waste. Non-biodegradability of conventional plastics is one of the main challenges to treat plastic waste. In an effort to increase the efficiency of plastic waste treatment, biodegradable plastics have gained attention. Although the use of biodegradable plastics has been increased, their potential effects on the environments are not fully elucidated yet. In this study, the impacts of micro-sized non-biodegradable plastic (i.e., polystyrene (PS)) and micro-sized biodegradable plastics (i.e., polycaprolactone (PCL) and polylactic acid (PLA)) on Microcystis aeruginosa were investigated. Regardless of microplastic (MP) types, MP treatments inhibited the growth of M. aeruginosa at the beginning (4 days) while significant dose-dependent effect was not observed in the range of 0.1 to 10 mg/L. However, after long-term exposure (12 days), micro-sized biodegradable plastics stimulated the growth of M. aeruginosa (up to 73 % increase compared to the control). The photosynthetic activity showed a similar trend to the cell growth. The MP treatments induced the production of extracellular polymeric substances (EPS). Indeed, micro-sized PCL and PLA stimulated the production of protein compounds in EPS. These might have affected the releases of chemicals from PCL and PLA, suggesting that the chemicals in biodegradable plastic leachates would promote the growth of M. aeruginosa in long-term exposure. The MP treatments also induced cyanotoxin (microcystin-LR) productions. Our results give a new insight into the cyanobacterial blooming and suggest a novel relationship between harmful algal blooms (HABs) and biodegradable plastics.

Application of flow cytometry for rapid, high-throughput, multiparametric analysis of environmental microbiomes

Quantification of the abundance and understanding of the dynamics of the microbial communities is essential to establish a basis for microbiome characterization. The conventional techniques used for the quantification of microbes are complicated and time-consuming. With scientific advancement, many techniques evolved and came into account. Among them, flow cytometry is a robust, high-throughput technique through which microbial dynamics, morphology, microbial distribution, physiological characteristics, and many more attributes can be studied in a high-throughput manner with comparatively less time and resources. Flow cytometry, when combined with other omics-based methods, offers a rapid and efficient platform to analyze and understand the composition of microbiome at the cellular level. The microbial diversity observed through flow cytometry will not be equivalent to that obtained by sequencing methods, but this integrated approach holds great potential for high throughput characterization of microbiomes. Flow cytometry is regarded as an established characterization tool in haematology, oncology, immunology, and medical microbiology research; however, its application in environmental microbiology is yet to be explored. This comprehensive review aims to delve into the diverse environmental applications of flow cytometry across various domains, including but not limited to bioremediation, landfills, anaerobic digestion, industrial bioprocesses, water quality regulation, and soil quality regulation. By conducting an in-depth analysis, this article seeks to shed light on the potential benefits and challenges associated with the utilization of flow cytometry in addressing environmental concerns.

Investigation of dissolved organic matter's influence on the toxicity of cadmium to the cyanobacterium Microcystis aeruginosa by biochemical and molecular assays

Rapid economic development has increased the accumulation of dissolved organic matter (DOM) and heavy metals in aquatic environments. In addition, Microcystis aeruginosa can cause the outbreak of cyanobacteria bloom and can produce microcystin, which poses a threat to human water safety. Therefore, this study analyzed the biochemical and molecular assays of DOM (0, 1, 3, 5, 8, 10 mg C L-1) extracted from four different sources on the toxicity of cadmium (Cd) to M. aeruginosa. The results showed that the addition of different concentrations of DOM from sediment, biochar, and humic acid alleviated the toxicity of Cd to M. aeruginosa. But the addition of rice hulls DOM at high concentrations (8 and 10 mg L-1) significantly reduced the normal growth and metabolic activities of M. aeruginosa. DOM from four different sources promoted the expression level of microcystin-related gene mcyA and the production of microcystin-leucine-arginine (MC-LR), and mcyA was positively correlated with MC-LR. DOM from biochar, sediment, and humic acid were able to bind Cd through complexation. The results will help to understand the toxic effects of heavy metals on toxic-producing cyanobacteria in the presence of DOM, and provide certain reference for the evaluation of water environmental health.

Molecular changes in phenolic compounds in Euglena gracilis cells grown under metal stress

Metal presence in the aquatic ecosystem has increased and diversified over the last decades due to anthropogenic sources. These contaminants cause abiotic stress on living organisms that lead to the production of oxidizing molecules. Phenolic compounds are part of the defense mechanisms countering metal toxicity. In this study, the production of phenolic compounds by Euglena gracilis under three different metal stressors (i.e. cadmium, copper, or cobalt) at sub-lethal concentration was assessed using an untargeted metabolomic approach by mass spectrometry combined with neuronal network analysis (i.e. Cytoscape). The metal stress had a greater impact on molecular diversity than on the number of phenolic compounds. The prevalence of sulfur- and nitrogen-rich phenolic compounds were found in Cd- and Cu-amended cultures. Together these results confirm the impact of metallic stress on phenolic compounds production, which could be utilized to assess the metal contamination in natural waters.

Evaluation of Cd2+ stress on Synechocystis sp. PCC6803 based on single-cell elemental accumulation and algal toxicological response

With the development of single cell analysis techniques, the concept of precision toxicology has been proposed in recent years. Due to the heterogeneity of cells, we need to perform toxicological assessments on individual cells. Microalgae, one kind of important primary producers, play as a major pathway by which heavy metals enter the food chain and thus accumulate/transfer to higher trophic levels. Herein, the biosorption of Cd (Ex-Cd) and bioaccumulation of Cd (In-Cd) for Synechocystis sp. PCC 6803 were investigated by online 3D droplet microfluidic device combined with inductively coupled plasma mass spectrometry detection. Meanwhile, the algal toxicological responses of the algae cell to Cd²⁺ exposure under different concentration (50, 100, and 150 μg L ^- 1) and time (15 min, 24, 48 and 96 h) were studied. Combining single-cell analysis with toxicological indicators, the toxicity mechanism of Cd²⁺to algal was discussed. The single cell analysis results revealed heterogeneity in cellular uptake of Cd²⁺. The proportion of Cd-containing cells and Cd content in single algal cells all reached the maximum at 24 h. The uptake of Cd²⁺ occurred within 15 min under all tested exposure concentrations and a large part of Cd²⁺ were adsorbed on the algal cells surface. The Pearson correlation analysis showed that cell density, chlorophyll a and carotenoids were significantly negatively correlated with Cd accumulation, whereas ROS level and SOD activity were significantly positively correlated with Cd accumulation. It suggested that Cd²⁺accumulated intracellular would show toxic effects on the algal cells and oxidative stress is the main mechanism of Cd toxicity to algal cells. This work promotes our understanding of the toxicological responses of microalgae under Cd stress at single cells level.

Toxicity effects of microplastics and nanoplastics with cadmium on the alga Microcystis aeruginosa

The extensive spread of microplastics (MPs) and nanoplastics (NPs) in the aquatic environment has attracted widespread attention. The toxicity of cadmium (Cd) combined with microplastics (MPs) and nanoplastics (NPs) toward freshwater algae Microcystis aeruginosa (M. aeruginosa) was investigated to evaluate the environmental behavior of the Cd complexation in fresh water. Cd alone has the highest toxicity to algae. Both MPs and NPs also have a negative effect on the growth of algae as individual components due to their adsorption of nutrients and disruption of the alga's activity in a single MPs/NPs system. Compared with the single system, the toxicity of compound pollution including MPs + Cd and NPs + Cd becomes stronger, which presents a synergistic effect. In the presence of NPs, more extracellular polymeric substances (EPS) appeared, which helped to reduce the toxic effect on the algal cells. Moreover, MPs/NPs + Cd stimulate the production of microcystin-LR (MC-LR) under different treatments. Overall, the aquatic environmental assessment shows potentially elevated risks associated with combined MPs/NPs with Cd, which should be considered.

Characterization of Modified Mechanically Activated Cassava Starch Magnetic Porous Microspheres and Its Adsorption for Cd(II) Ions

The magnetic polymer microsphere is a promising adsorbent due to its high adsorption efficiency and good regeneration ability from wastewater. Cassava starch magnetic porous microspheres (AAM-MSMPMs) were synthesized by graft copolymerization in inverse emulsion. Mechanically activated cassava starch (MS) was used to graft skeletons, vinyl monomers [acrylic acid (AA) and acrylamide (AM)] as copolymerized unsaturated monomers, methyl methacrylate (MMA) as the dispersing agent, and polyethylene glycol/methanol (PEG2000/MeOH) as the porogen. It was found that the AAM-MSMPM adsorbent is superparamagnetic, the saturation magnetization is 14.9 emu·g-1, and it can be rapidly and directionally separated from Cd(II) ions in aqueous solution. The FTIR indicated that the carboxyl and hydroxyl groups were grafted into MS. The AAM-MSMPM had good speroidization and a uniform size. After the porogen was added, the particle size of the AAM-MSMPM decreased from 19.00 to 7.00 nm, and the specific surface area increased from 7.00 to 35.00 m2·g-1. The pore volume increased from 0.03 to 0.13 cm3·g-1. The AAM-MSMPM exhibited a large specific surface area and provided more adsorption active sites for Cd(II) ions. The maximum adsorption capacity of the AAM-MSMPM for Cd(II) ions was 210.68 mg·g-1, i.e., 81.02% higher than that without porogen. Additionally, the Cd(II) ion adsorption process on the AAM-MSMPM can be described by Langmuir isothermal and pseudo-second-order kinetic models. A chemical reaction dominated the Cd(II) ion adsorption process on the AAM-MSMPM, and chemisorption was the rate-controlling step during the Cd(II) ion adsorption process. The AAM-MSMPM still had excellent stability after five consecutive reuses.

Applying fulvic acid for sediment metals remediation: Mechanism, factors, and prospect

Fulvic acid (FA) has been shown to play a decisive role in controlling the environmental geochemical behavior of metals. As a green and natural microbial metabolite, FA is widely used in environmental remediation because of its good adsorption complexation and redox ability. This paper introduces the reaction mechanism and properties of FA with metals, and reviews the progress of research on the remediation of metal pollutant by FA through physicochemical remediation and bioremediation. FA can control the biotoxicity and migration ability of some metals, such as Pb, Cr, Hg, Cd, and As, through adsorption complexation and redox reactions. The concentration, molecular weight, and source are the main factors that determine the remediation ability of FA. In addition, the ambient pH, temperature, metal ion concentrations, and competing components in sediment environments have significant effects on the extent and rate of a reaction between metals and FA during the remediation process. Finally, we summarize the challenges that this promising environmental remediation tool may face. The research directions of FA in the field of metals ecological remediation are also prospected. This review can provide new ideas and directions for the research of remediation of metals contaminants in sediments.

The recent development of inverse vulcanized polysulfide as an alternative adsorbent for heavy metal removal in wastewater

Inverse vulcanized polysulfides have been used as low-cost and effective adsorbents to remediate heavy metals in wastewater. Inverse vulcanization introduces sustainable polysulfide synthesis by solving the rapid desulfurization problem of unstable polysulfides, and provides superior performance compared to conventional commercial adsorbents. The review discussed the brief applications of the inverse vulcanized polysulfides to remove heavy metal wastewater and emphasized the modified synthesis processes for enhanced uptake ratios. The characteristics of polysulfide adsorbents, which play a vital role during the removal process are highlighted with a proper discussion of the interaction between metal ions and polysulfides. The review paper concludes with remarks on the future outlook of these low-cost adsorbents with high selectivity to heavy metals. These polysulfide adsorbents can be prepared using a wide variety of crosslinker monomers including organic hydrocarbons, cooking oils, and agro-based waste materials. They have shown good surface area and excellent metal-binding capabilities compared to the commercially available adsorbents. Proper postmodification processes have enabled the benefits of repetitive uses of the polysulfide adsorbents. The improved surface area obtained by appropriate choice of crosslinkers, modified synthesis techniques, and regeneration through post-modification has made inverse vulcanized polysulfides capable of removing.

Single and combined effects of Zn and Al on photosystem II of the green microalgae Raphidocelis subcapitata assessed by pulse-amplitude modulated (PAM) fluorometry

Increasing metal concentrations in aquatic environments are mainly due to anthropogenic actions, which is a matter of concern for the biodiversity of aquatic biota. It is known that metals coexist in environments, however environmental risk assessments do not usually take into account the effects of these mixtures. We aimed to test Zn and Al mixtures on the photosynthetic apparatus of a green microalga, for the first time, using PAM fluorometry. After 72 h exposure, single concentrations from 0.08 to 0.46 µM Zn and 22.24 to 37.06 µM Al affected the photosynthetic parameters of Raphidocelis subcapitata. Metals affected the efficiency of the oxygen-evolving complex - OEC (F₀/F_v), increasing it by 25% at 0.46 µM Zn and by 82% at 37.06 µM Al - concentrations where, 57% and 78% of growth inhibition occurred, respectively. We observed that the algal growth was more sensitive to infer Zn toxicity, while F₀/F_v was more affected by Al. Regarding quenching, there was an increase in passive energy dissipation ((Y(NO)) at 0.46 µM Zn, and we observed an increase in both regulated ((NPQ and Y(NPQ)) and non-regulated energy dissipation ((qN and (Y(NO)) at 37.06 µM Al. Our results showed synergism and antagonism at different concentrations in mixtures, the antagonism prevailing at higher metal concentrations and, in some cases, synergism at lower concentrations of Zn and Al. Since we observe more than additive and less than additive effects, it is of the utmost importance to take mixture toxicity tests into account when performing risk assessments on green algae.

Adsorption of Heavy Metal Ions Copper, Cadmium and Nickel by Microcystis aeruginosa

To investigate the treatment effect of algae biosorbent on heavy metal wastewater, in this paper, the adsorption effect of M. aeruginosa powder on heavy metal ions copper, cadmium and nickel was investigated using the uniform experimental method, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and TG-DSC comprehensive thermal analysis. The experimental results showed that the initial concentration of copper ion solution was 25 mg/L, the temperature was 30 °C, the pH value was 8 and the adsorption time was 5 h, which was the best condition for the removal of copper ions by algae powder adsorption, and the removal rate was 83.24%. The initial concentration of cadmium ion solution was 5 mg/L, the temperature was 35 °C, the pH value was 8 and the adsorption time was 4 h, which was the best condition for the adsorption of cadmium ion by algae powder, and the removal rate was 92.00%. The initial nickel ion solution concentration of 15 mg/L, temperature of 35 °C, pH value of 7 and adsorption time of 1 h were the best conditions for the adsorption of nickel ions by algae powder, and the removal rate was 88.67%. The spatial structure of algae powder changed obviously before and after adsorbing heavy metals. The functional groups such as amino and phosphate groups on the cell wall of M. aeruginosa enhanced the adsorption effect of heavy metal ions copper, cadmium and nickel. Additionally, M. aeruginosa adsorption of heavy metal ions copper, cadmium, nickel is an exothermic process. The above experiments show that M. aeruginosa can be used as a biological adsorbent to remove heavy metals, which lays a theoretical foundation for the subsequent treatment of heavy metal pollution by algae.

Microcystis colony formation: Extracellular polymeric substance, associated microorganisms, and its application

Microcystis sp., amongst the most prevalent bloom-forming cyanobacteria, is typically found as a colonial form with multiple microorganisms embedded in the mucilage known as extracellular polymeric substance. The colony-forming ability of Microcystis has been thoroughly investigated, as has the connection between Microcystis and other microorganisms, which is crucial for colony development. The following are the key subjects to comprehend Microcystis bloom in depth: 1) key issues related to the Microcystis bloom, 2) features and functions of extracellular polymeric substance, as well as diversity of associated microorganisms, and 3) applications of Microcystis-microorganisms interaction including bloom control, polluted water bioremediation, and bioactive compound production. Future research possibilities and recommendations regarding Microcystis-microorganism interactions and their significance in Microcystis colony formation are also explored. More information on such interactions, as well as the mechanism of Microcystis colony formation, can bring new insights into cyanobacterial bloom regulation and a better understanding of the aquatic ecosystem.

Methane production from peroxymonosulfate pretreated algae biomass: Insights into microbial mechanisms, microcystin detoxification and heavy metal partitioning behavior

This study investigated the methane production potential of algal biomass by anerobic digestion with the addition of peroxymonosulfate (PMS), the removal of microcystin were analyzed and discussed. The microcystin concentration in the collected algal sludge was 1.20 μg/L in the liquid phase and 1393 μg/g in the algal sludge before anaerobic fermentation. The microcystin concentration decreased to 0.20-0.35 μg/L in the liquid phase and 4.16-11.51 μg/g in the sludge phase after 60 days of digestion. The initial PMS dose and residue microcystin concentration could be simulated with a logarithmic decay model (R² > 0.87). Anaerobic digestion could recover energy from algal source in the form of methane gas, which was not affected in the presence of microcystin, and the microcystin removal rate was >99%. Digestion decreased the total contents of Cd and Zn in the liquid phase and increased the total contents of Cr and Pb in the liquid phase. The microbial community and function prediction results indicated that the PMS0.1 system had the highest methane production, which was attributed to the high abundance of Mechanosaeta (40.52%). This study provides insights into microbial mechanisms, microcystin detoxification and the heavy metal partitioning behavior of the algal biomass during methane production.

A review on bioremediation approach for heavy metal detoxification and accumulation in plants

Nowadays, the accumulation of toxic heavy metals in soil and water streams is considered a serious environmental problem that causes various harmful effects on plants and animals. Phytoremediation is an effective, green, and economical bioremediation approach by which the harmful heavy metals in the contaminated ecosystem can be detoxified and accumulated in the plant. Hyperaccumulators exude molecules called transporters that carry and translocate the heavy metals present in the soil to different plant parts. The hyperaccumulator plant genes can confine higher concentrations of toxic heavy metals in their tissues. The efficiency of phytoremediation relies on various parameters such as soil properties (pH and soil type), organic matters in soil, heavy metal type, nature of rhizosphere, characteristics of rhizosphere microflora, etc. The present review comprehensively discusses the toxicity effect of heavy metals on the environment and different phytoremediation mechanisms for the transport and accumulation of heavy metals from polluted soil. This review gave comprehensive insights into plants tolerance for the higher heavy metal concentration their responses for heavy metal accumulation and the different mechanisms involved for heavy metal tolerance. The current status and the characteristic features that need to be improved in the phytoremediation process are also reviewed in detail.

Effects of zinc and iron on the abundance of Microcystis in Lake Taihu under green light and turbulence conditions

Trace element is one of the important factors affecting the growth of Microcystis. The effects of zinc (0.4 mg/L) and iron (2 mg/L) on the abundance of Microcystis in Lake Taihu were investigated under continuous turbulence and green light conditions in a microcosm experiment. The study results showed that the abundance of Microcystis in the zinc treatment and the iron treatment group was 8.30% and 214% of that in the control group at the end of the experiment, respectively. The proportion of Cyanobacteria in the total phytoplankton biomass in the control, iron treatment, and zinc treatment group decreased from 99.99% at the beginning of the experiment to 13%, 18%, and 1% at the end of the experiment, respectively. At the end of the microcosm experiment, the phytoplankton community was dominated by Bacillariophyta in the control group, accounting for 63%, but it was dominated by Chlorophyta in the zinc treatment and the iron treatment group, accounting for 89% and 42%, respectively. The study results showed that under green light and turbulence, 0.4 mg/L zinc remarkably decreased the abundance of Microcystis, but 2 mg/L iron effectively increased the number of Microcystis and other algae. This research results provided a new idea for controlling Microcystis blooms.

Potassium supplement enhanced cadmium removal in a Microcystis aeruginosa photobioreactor: Evidence from actual and simulated wastewater

In this study, a Microcystis aeruginosa-based photobioreactor (M. aeruginosa-based PBR) was developed for the removal of cadmium (Cd²⁺) from diluted actual mine wastewater (DW) and Cd²⁺-contained simulated wastewater (SW), with a uniform Cd²⁺ concentration of 0.5 mg/L. For the DW and SW, both K⁺ -abundant (DWA & SWA) and K⁺-insufficient (DWB & SWB) treatments were conducted. It was found that continuous supplementation of K⁺ benefited Cd²⁺ removal. The Cd²⁺ removal efficiency in SWA reached 70% during the 41 days of operation, which was 20% higher than that in the SWB. The K⁺ addition triggered great higher Cd²⁺ removal efficiency (90%) in the DWA in comparison to the SWA. The Cd²⁺ assimilation by M. aeruginosa and Cd²⁺ retention on M. aeruginosa surface were the primary processes involved in the PBR system. The K⁺ starvation triggered a 45% and 43% loss of M. aeruginosa biomass in the DWA and the DWB, respectively. Hence, the Cd²⁺ removal efficiency in DWB increased significantly, and this was attributed to the increased abundance of non-living cells and enhanced bioretention of Cd²⁺. The results revealed that continuous K⁺ supplementation enhanced the Cd²⁺ removal efficiency in the M. aeruginosa-based PBR jointly by prompting algal cell growth, Cd²⁺ assimilation and biosorption, as well as Cd²⁺ retention on the algal cells.

A review on adsorptive separation of toxic metals from aquatic system using biochar produced from agro-waste

Water is a basic and significant asset for living beings. Water assets are progressively diminishing due to huge populace development, industrial activities, urbanization and rural exercises. Few heavy metals include zinc, copper, lead, nickel, cadmium and so forth can easily transfer into the water system either direct or indirect activities of electroplating, mining, tannery, painting, fertilizer industries and so forth. The different treatment techniques have been utilized to eliminate the heavy metals from aquatic system, which includes coagulation/flocculation, precipitation, membrane filtration, oxidation, flotation, ion exchange, photo catalysis and adsorption. The adsorption technique is a better option than other techniques because it can eliminate heavy metals even at lower metal ions concentration, simplicity and better regeneration behavior. Agricultural wastes are low-cost biosorbent and typically containing cellulose have the ability to absorb a variety of contaminants. It is important to note that almost all agro wastes are no longer used in their original form but are instead processed in a variety of techniques to improve the adsorption capacity of the substance. The wide range of adsorption capacities for agro waste materials were observed and almost more than 99% removal of toxic pollutants from aquatic systems were achieved using modified agro-waste materials. The present review aims at the water pollution due to heavy metals, as well as various heavy metal removal treatment procedures. The primary objectives of this research is to include an overview of adsorption and various agriculture based adsorbents and its comparison in heavy metal removal.

The role of glutathione-mediated triacylglycerol synthesis in the response to ultra-high cadmium stress in Auxenochlorella protothecoides

Under ultra-high cadmium (Cd) stress, large amounts of glutathione are produced in Auxenochlorella protothecoides UTEX 2341, and the lipid content increases significantly. Glutathione is the best reductant that can effectively remove Cd, but the relationship between lipid accumulation and the cellular response to Cd stress has not been ascertained. Integrating analyses of the transcriptomes and lipidomes, the mechanism of lipid accumulation to Cd tolerance were studied from the perspectives of metabolism, transcriptional regulation and protein glutathionylation. Under Cd stress, basic metabolic pathways, such as purine metabolism, translation and pre-mRNA splicing process, were inhibited, while the lipid accumulation pathway was significantly activated. Further analysis revealed that the transcription factors (TFs) and genes related to lipid accumulation were also activated. Analysis of the TF interaction sites showed that ABI5, MYB_rel and NF-YB could further regulate the expression of diacylglycerol acyltransferase through glutathionylation/deglutathionylation, which led to increase of the triacylglycerol (TAG) content. Lipidomes analysis showed that TAG could help maintain lipid homeostasis by adjusting its saturation/unsaturation levels. This study for the first time indicated that glutathione could activate TAG synthesis in microalga A. protothecoides, leading to TAG accumulation and glutathione accumulation under Cd stress. Therefore, the accumulation of TAG and glutathione can confer resistance to high Cd stress. This study provided insights into a new operation mode of TAG accumulation under heavy metal stress.

Efficiency of extremophilic microbial mats for removing Pb(II), Cu(II), and Ni(II) ions from aqueous solutions

Two different extremophilic films were used as natural biosorbents to remove Cu(II), Ni(II), and Pb(II) from aqueous solutions. Surface area, scanning electron microscopy imaging, and Fourier transformation infrared spectroscopy were used to characterize the surfaces of the biosorbents. The results indicated high affinity of the biosorbents to remove Pb(II), Cu(II), and Ni(II), with adsorption rates ranging from 73.6 to 100% for both biosorbents. The biosorbents succeed in removing the metal ions from aqueous mixtures in the following order: Pb(II) > Cu(II) > Ni(II). The maximum removal rates of metal ions were achieved at pH 6, contact time of 150 min, biosorbent dose of 2.5 g/L, and metal ion concentration of 50 mg/L. The isothermal studies showed that both Langmuir and Freundlich models well expressed the adsorption process. Kinetically, the pseudo-second-order reaction better expressed the type of reaction than the pseudo-first-order reaction.

Influence of Humic Acid on Oxidative Stress Induced by Arsenite and Arsenate Waterborne Exposure in Danio rerio

The studies on how humic acid (HA) influences the oxidative stress of arsenic in aquatic organism is limited. Using Danio rerio as case study, we explored the oxidative stress effects in aquatic organism after 96 h exposure to the HA and arsenic. Results revealed the co-exposure of HA and arsenite elevated the superoxide dismutase activities and downgraded the malondialdehyde. Thus, we speculate that HA may alleviate the oxidative stress induced by arsenite, which may be caused by the HA's coating in combination with the complexation of arsenite and HA. In addition, HA acted as the reactive oxygen species scavenger, promising to eliminate the oxygen free radicals. Contrastingly, HA may impact little on the arsenate exposure. This study can help better understand oxidative stress mechanism of co-exposure of arsenic and HA in aquatic environment.

Deciphering and engineering photosynthetic cyanobacteria for heavy metal bioremediation

Environmental pollution caused by heavy metals has received worldwide attentions due to their ubiquity, poor degradability and easy bioaccumulation in host cells. As one potential solution, photosynthetic cyanobacteria have been considered as promising remediation chassis and widely applied in various bioremediation processes of heavy-metals. Meanwhile, deciphering resistant mechanisms and constructing tolerant chassis towards heavy metals could greatly contribute to the successful application of the cyanobacteria-based bioremediation in the future. In this review, first we summarized recent application of cyanobacteria in heavy metals bioremediation using either live or dead cells. Second, resistant mechanisms and strategies for enhancing cyanobacterial bioremediation of heavy metals were discussed. Finally, potential challenges and perspectives for improving bioremediation of heavy metals by cyanobacteria were presented.

Co-Cultivation of Leptolyngbya tenuis (Cyanobacteria) and Chlorella ellipsoidea (Green alga) for Biodiesel Production, Carbon Sequestration, and Cadmium Accumulation

The co-cultivation approach using cyanobacteria-Leptolyngbya tenuis and green alga-Chlorella ellipsoidea demonstrated in the present study showed additive and synergistic effects on biomass yield, biomass productivity, lipid yield, lipid productivity, CO₂ fixation, and cadmium bioremediation efficiency. The results of co-culture in batch mode revealed about 2-3 times increase in biomass and two times increase in total lipid, when compared to the pure culture batches. The results revealed that co-cultures exhibited significantly high CO₂ fixation rate of 2.63  ±  0.09 g/L/d, which is 1.5-2 times better than monocultures (P < 0.05). To explore the bioaccumulation of cadmium by co-cultures and pure cultures, different concentrations of cadmium nitrate was used in flask trials. Cadmium accumulation was observed in the order: co-culture (74%, 0.37 mg/L) > Chlorella (58%, 0.29 mg/L) > Leptolyngbya (50%, 0.25 mg/L) (P < 0.05). In addition, fatty acid composition, CHNS analysis, biodiesel characterization, and biochemical compositions were also determined using co-culture method. The maximum biomass yield, productivity, lipid content, and CO₂ fixation rate in cadmium induced co-culture were 3.95  ±  0.13 g/L, 258.88  ±  15.75 mg/L/d, 41.43  ±  0.71%, and 3.21  ±  0.20 g/L/d, respectively which is 1.2, 1.3, 2.3, and 1.2 times higher than the control (P < 0.05). Cadmium induced changes in growth and lipid yield using co-culture suggests cost-effective and eco-friendly production of biodiesel and carbon mitigation.

Qualitative and quantitative adsorption mechanisms of zinc ions from aqueous solutions onto dead carp derived biochar

The adsorption mechanisms of Zn2+ on carp biochars mainly include precipitation with minerals, exchange with cations, and complexation with OFGs. The pyrolysis temperature of carp biochars has a significant effect on the mechanisms of Zn2+ adsorption.

Arsenate phytotoxicity regulation by humic acid and related metabolic mechanisms

The use of irrigation water containing arsenic (As) had led to large areas of As-contaminated farmland, and as a result, plants and food have become severely poisoned. Humic acid (HA) can be complexed with metals, which in turn affects the metals' behavior. Herein, we explored the accumulation of arsenate in lettuce treated with different concentrations of arsenate and studied the effects of HA on the accumulation and toxicity of arsenate. The addition of HA did not cause significant changes in the arsenate content in lettuce but had a significant effect on the activity of antioxidant enzymes, which improved the antioxidant capability of the lettuce plants. Furthermore, HA promoted the accumulation of nutrients, such as magnesium (Mg), calcium (Ca), molybdenum (Mo) and manganese (Mn), in the leaves. Arsenate disrupted metabolic pathways, such as amino acid metabolism, carbohydrate metabolism, and aminoacyl-tRNA biosynthesis. The addition of HA increased the contents of amino acids and sugars, thereby improving lettuce growth. The present study explored the effects of HA on As accumulation and related physiological changes (antioxidant enzyme activities, absorption of nutrients and metabolic mechanisms) and provided insights into the regulation of As contamination by HA, which is relatively inexpensive.