Role of microbial community and metal-binding proteins in phytoremediation of heavy metals from industrial wastewater

Mechanistic insights into tris(2-chloroisopropyl) phosphate biomineralization coupled with lead (II) biostabilization driven by denitrifying bacteria

The ubiquity and persistence of organophosphate esters (OPEs) and heavy metal (HMs) pose global environmental risks. This study explored tris(2-chloroisopropyl)phosphate (TCPP) biomineralization coupled to lead (Pb2+) biostabilization driven by denitrifying bacteria (DNB). The domesticated DNB achieved synergistic bioremoval of TCPP and Pb2+ in the batch bioreactor (efficiency: 98 %).TCPP mineralized into PO43- and Cl-, and Pb2+ precipitated with PO43-. The TCPP-degrading/Pb2+-resistant DNB: Achromobacter, Pseudomonas, Citrobacter, and Stenotrophomonas, dominated the bacterial community, and synergized TCPP biomineralization and Pb2+ biostabilization. Metagenomics and metaproteomics revealed TCPP underwent dechlorination, hydrolysis, the TCA cycle-based dissimilation, and assimilation; Pb2+ was detoxified via bioprecipitation, bacterial membrane biosorption, EPS biocomplexation, and efflux out of cells. TCPP, as an initial donor, along with NO3-, as the terminal acceptor, formed a respiratory redox as the primary energy metabolism. Both TCPP and Pb2+ can stimulate phosphatase expression, which established the mutual enhancements between their bioconversions by catalyzing TCPP dephosphorylation and facilitating Pb2+ bioprecipitation. TCPP may alleviate the Pb2+-induced oxidative stress by aiding protein phosphorylation. 80 % of Pb2+ converted into crystalized pyromorphite. These results provide the mechanistic foundations and help develop greener strategies for synergistic bioremediation of OPEs and HMs.

Effects and molecular mechanisms of polyethylene microplastic oxidation on wheat grain quality

Polyethylene microplastics (PE MPs) are the main MPs in agricultural soils and undergo oxidation upon environmental exposure. However, the influence of MP oxidation on phytotoxicity (especially for crop fruit) is still limited. This study aimed to explore the effect of PE MP oxidation on crop toxicity. Herein, a combination of plant phenotyping, metabolomic, and transcriptomic approaches was used to evaluate the effects of low-oxidation PE (LOPE) and high-oxidation PE (HOPE) on wheat growth, grain quality, and related molecular mechanisms using pot experiments. The results showed that HOPE induced a stronger inhibition of wheat growth and reduction in protein content and mineral elements than LOPE. This was accompanied by root ultrastructural damage and downregulation of carbohydrate metabolism, translation, nutrient reservoir activity, and metal ion binding gene expression. Compared with HOPE, LOPE activated a stronger plant defense response by reducing the starch content by 22.87 %, increasing soluble sugar content by 44.93 %, and upregulating antioxidant enzyme genes and crucial metabolic pathways (e.g., starch and sucrose, linoleic acid, and phenylalanine metabolism). The presence of PE MPs in the environment exacerbates crop growth inhibition and fruit quality deterioration, highlighting the need to consider the environmental and food safety implications of MPs in agricultural soils.

Phytoremediation: a transgenic perspective in omics era

Phytoremediation is an environmental safety strategy that might serve as a viable preventative approach to reduce soil contamination in a cost-effective manner. Using plants to remediate pollution from the environment is referred to as phytoremediation. In the past few decades, plants have undergone genetic manipulation to overcome inherent limitations by using genetically modified plants. This review illustrates the eco-friendly process of cleaning the environment using transgenic strategies combined with omics technologies. Herbicides tolerance and phytoremediation abilities have been established in genetically modified plants. Transgenic plants have eliminated the pesticides atrazine and metolachlor from the soil. To expand the application of genetically engineered plants for phytoremediation process, it is essential to test strategies in the field and have contingency planning. Omics techniques were used for understanding various genetic, hormonal, and metabolic pathways responsible for phytoremediation in soil. Transcriptomics and metabolomics provide useful information as resources to understand the mechanisms behind phytoremediation. This review aims to highlight the integration of transgenic strategies and omics technologies to enhance phytoremediation efficiency, emphasizing the need for field testing and comprehensive planning for successful implementation.

Sustainable approaches for removing toxic heavy metal from contaminated water: A comprehensive review of bioremediation and biosorption techniques

In this comprehensive study, highlights emerging environmentally friendly methods to eliminating hazardous heavy metals from contaminated water, with an emphasis on bioremediation and biosorption. Breakthroughs, such as the combination of biological remediation and nanotechnology to improve the elimination of metals effectiveness and the use of genetically modified microbes for targeted pollutant breakdown. Developing biosorption materials made from agricultural waste and biochar, this indicates interesting areas for future research and emphasizes the necessity of sustainable practices in tackling heavy metal contamination in water systems. There seems to be a surge in enthusiasm for the utilization of biological remediation and biosorption methods as sustainable and viable options for eliminating heavy metals from contaminated water in the past couple of decades. The present review intends to offer an in-depth review of the latest understanding and advances in the discipline of biological remediation methods like bioaccumulation, biofiltration, bio-slurping, and bio-venting. Biosorption is specifically explained and includes waste biomass as biosorbent with the removal mechanisms and the hindrances caused in the process are detailed. Advances in biosorption like microbes as biosorbents and the mechanism involved in it. Additionally, novel enhancement techniques like immobilization, genetic modification, and ultrasound-assisted treatment in microbial sorbent are clarified. However, the review extended with analyzing the future advances in the overall biological methods and consequences of heavy metal pollution.

Multi-omics insights into biogeochemical responses to organic matter addition in an acidic pit lake: Implications for bioremediation

Acidic pit lakes (APLs) emerge as reservoirs of acid mine drainage in flooded open-pit mines, representing extreme ecosystems and environmental challenges worldwide. The bioremediation of these oligotrophic waters necessitates the addition of organic matter, but the biogeochemical response of APLs to exogenous organic matter remains inadequately comprehended. This study delves into the biogeochemical impacts and remediation effects of digestate-derived organic matter within an APL, employing a multi-omics approach encompassing geochemical analyses, amplicon and metagenome sequencing, and ultra-high resolution mass spectrometry. The results indicated that digestate addition first stimulated fungal proliferation, particularly Ascomycetes and Basidiomycetes, which generated organic acids through lignocellulosic hydrolysis and fermentation. These simple compounds further supported heterotrophic growth, including Acidiphilium, Acidithrix, and Clostridium, thereby facilitating nitrate, iron, and sulfate reduction linked with acidity consumption. Nutrients derived from digestate also promoted the macroscopic development of acidophilic algae. Notably, the increased sulfate reduction-related genes primarily originated from assimilatory metabolism, thus connecting sulfate decrease to organosulfur increase. Assimilatory and dissimilatory sulfate reduction collectively contributed to sulfate removal and metal fixation. These findings yield multi-omics insights into APL biogeochemical responses to organic matter addition, enhancing the understanding of carbon-centered biogeochemical cycling in extreme ecosystems and guiding organic amendment-based bioremediation in oligotrophic polluted environments.

Screening, separation and identification of metal-chelating peptides for nutritional, cosmetics and pharmaceutical applications

Metal-chelating peptides, which form metal-peptide coordination complexes with various metal ions, can be used as biofunctional ingredients notably to enhance human health and prevent diseases. This review aims to discuss recent insights into food-derived metal-chelating peptides, the strategies set up for their discovery, their study, and identification. After understanding the overall properties of metal-chelating peptides, their production from food-derived protein sources and their potential applications will be discussed, particularly in nutritional, cosmetics and pharmaceutical fields. In addition, the review provides an overview of the last decades of progress in discovering food-derived metal-chelating peptides, addressing several screening, separation and identification methodologies. Furthermore, it emphasizes the methods used to assess peptide-metal interaction, allowing for better understanding of chemical and thermodynamic parameters associated with the formation of peptide-metal coordination complexes, as well as the specific amino acid residues that play important roles in the metal ion coordination.

From slag to green: Aided-phytoremediation as a sustainable tool to rehabilitate land contaminated by steel slag and assessment of CO2 sequestration

Steel slag (SS) has many applications, but its immediate reuse is not possible due to its inherent swelling potential and presence of toxic metals. Therefore, it can only be used after the aging process, which can be either natural or artificial. While few large-scale steel plants afford artificial aging, many small-scale ones opt for natural aging through stockpiling of SS. This results in an increase in soil pH to over 12, thus damaging the ecosystem and making it unviable for plant growth. This research focuses on the reclamation of land affected by SS through the formation of a Phyto-barrier using 22 native plant species aided by the application of a 2 % (v/v) solution of the organic amendment. Furthermore, the superior performance of plants belonging to the Fabaceae family was ascertained, while establishing Sesbania grandiflora as an able species for aided-phytoremediation due to its remarkable growth (≈ 10 ft tall and 33 cm in circumference) during the study period. The CO2 sequestered by the plantation showed that maximum sequestration has been done by Sesbania grandiflora (49.96 kg CO2 / tree/ year), and least by Azadirachta indica (0.35 kg CO2/tree/year). The overall CO2 sequestered by the plantation stood at 3.85 tons/year. A cost-benefit analysis of using aided-phytoremediation indicates an expense of 90 $ per year as the recurring expense, while carbon credits if monetized, would yield 154 $ to 308 $ as returns. The investigations of this study established a new approach to vegetation over SS-affected land, through native species and the application of organic amendment.

Biomonitoring of heavy metals and their phytoremediation by duckweeds: Advances and prospects

Heavy metals (HMs) contamination of water bodies severely threatens human and ecosystem health. There is growing interest in the use of duckweeds for HMs biomonitoring and phytoremediation due to their fast growth, low cultivation costs, and excellent HM uptake efficiency. In this review, we summarize the current state of knowledge on duckweeds and their suitability for HM biomonitoring and phytoremediation. Duckweeds have been used for phytotoxicity assays since the 1930s. Some toxicity tests based on duckweeds have been listed in international guidelines. Duckweeds have also been recognized for their ability to facilitate HM phytoremediation in aquatic environments. Large-scale screening of duckweed germplasm optimized for HM biomonitoring and phytoremediation is still essential. We further discuss the morphological, physiological, and molecular effects of HMs on duckweeds. However, the existing data are clearly insufficient, especially in regard to dissection of the transcriptome, metabolome, proteome responses and molecular mechanisms of duckweeds under HM stresses. We also evaluate the influence of environmental factors, exogenous substances, duckweed community composition, and HM interactions on their HM sensitivity and HM accumulation, which need to be considered in practical application scenarios. Finally, we identify challenges and propose approaches for improving the effectiveness of duckweeds for bioremediation from the aspects of selection of duckweed strain, cultivation optimization, engineered duckweeds. We foresee great promise for duckweeds as phytoremediation agents, providing environmentally safe and economically efficient means for HM removal. However, the primary limiting issue is that so few researchers have recognized the outstanding advantages of duckweeds. We hope that this review can pique the interest and attention of more researchers.

Heavy metals/-metalloids (As) phytoremediation with Landoltia punctata and Lemna sp. (duckweeds): coupling with biorefinery prospects for sustainable phytotechnologies

Heavy metals/-metalloids can result in serious human health hazards. Phytoremediation is green bioresource technology for the remediation of heavy metals and arsenic (As). However, there exists a knowledge gap and systematic information on duckweed-based metal phytoremediation in an eco-sustainable way. Therefore, the present review offers a critical discussion on the effective use of duckweeds (genera Landoltia and Lemna)-based phytoremediation to decontaminate metallic contaminants from wastewater. Phytoextraction and rhizofiltration were the major mechanism in 'duckweed bioreactors' that can be dependent on physico-chemical factors and plant-microbe interactions. The biotechnological advances such as gene manipulations can accelerate the duckweed-based phytoremediation process. High starch and protein contents of the metal-loaded duckweed biomass facilitate their use as feedstock in biorefinery. Biorefinery prospects such as bioenergy production, value-added products, and biofertilizers can augment the circular economy approach. Coupling duckweed-based phytoremediation with biorefinery can help achieve Sustainable Development Goals (SDGs) and human well-being.

Biodegradable chelating agents for enhancing phytoremediation: Mechanisms, market feasibility, and future studies

Heavy metals in soil significantly threaten human health, and their remediation is essential. Among the various techniques used, phytoremediation is one of the safest, most innovative, and effective. In recent years, the use of biodegradable chelators to assist plants in improving their remediation efficiency has gained popularity. These biodegradable chelators aid in the transformation of metal ions or metalloids, thereby facilitating their mobilization and uptake by plants. Developed countries are increasingly adopting biodegradable chelators for phytoremediation, with a growing emphasis on green manufacturing and technological innovation in the chelating agent market. Therefore, it is crucial to gain a comprehensive understanding of the mechanisms and market prospects of biodegradable chelators for phytoremediation. This review focuses on elucidating the uptake, translocation, and detoxification mechanisms of chelators in plants. In this study, we focused on the effects of biodegradable chelators on the growth and environmental development of plants treated with phytoremediation agents. Finally, the potential risks associated with biodegradable chelator-assisted phytoremediation are presented in terms of their availability and application prospects in the market. This study provides a valuable reference for future research in this field.

Synergistic interactions of assorted ameliorating agents to enhance the potential of heavy metal phytoremediation

Pollution by toxic heavy metals creates a significant impact on the biotic community of the ecosystem. Nowadays, a solution to this problem is an eco-friendly approach like phytoremediation, in which plants are used to ameliorate heavy metals. In addition, various amendments are used to enhance the potential of heavy metal phytoremediation. Symbiotic microorganisms such as phosphate-solubilizing bacteria (PSB), endophytes, mycorrhiza and plant growth-promoting rhizobacteria (PGPR) play a significant role in the improvement of heavy metal phytoremediation potential along with promoting the growth of plants that are grown in contaminated environments. Various chemical chelators (Indole 3-acetic acid, ethylene diamine tetra acetic acid, ethylene glycol tetra acetic acid, ethylenediamine-N, N-disuccinic acid and nitrilotri-acetic acid) and their combined action with other agents also contribute to heavy metal phytoremediation enhancement. With modern techniques, transgenic plants and microorganisms are developed to open up an alternative strategy for phytoremediation. Genomics, proteomics, transcriptomics and metabolomics are widely used novel approaches to develop competent phytoremediators. This review accounts for the synergistic interactions of the ameliorating agent's role in enhancing heavy metal phytoremediation, intending to highlight the importance of these various approaches in reducing heavy metal pollution.

Extracellular proteins enhance Cupriavidus pauculus nickel tolerance and cell aggregate formation

Heavy metal-resistant bacteria secrete extracellular proteins (e-PNs). However, the role of e-PNs in heavy metal resistance remains elusive. Here Fourier Transform Infrared Spectroscopy implied that N-H, C = O and NH2-R played a crucial role in the adsorption and resistance of Ni2+ in the model organism Cuprividus pauculus 1490 (C. pauculus). Proteinase K treatment reduced Ni2+ resistance of C. pauculus underlining the essential role of e-PNs. Further three-dimension excitation-emission matrix fluorescence spectroscopy analysis demonstrated that tryptophan proteins as part of the e-PNs increased significantly with Ni2+ treatment. Proteomic and quantitative real-time polymerase chain reaction data indicated that major changes were induced in the metabolism of C. pauculus in response to Ni2+. Among those lipopolysaccharide biosynthesis, general secretion pathways, Ni2+-affiliated transporters and multidrug efflux play an essential role in Ni2+ resistance. Altogether the results provide a conceptual model for comprehending how e-PNs contribute to bacterial resistance and adsorption of Ni2+.

Equilibrium, kinetic, and thermodynamic studies on the biosorption of lead by human metallothionein gene-cloned bacteria as a novel biosorbent

Heavy metals are the main pollutants in water and are an important global problem that threatens human health and ecosystems. In recent years, there has been an increasing interest in the use of genetically modified bacteria as an eco-friendly method to solve heavy metal pollution problems. The goal of this study was to generate genetically modified Escherichia coli expressing human metallothioneins (hMT2A and hMT3) and to determine their tolerance, bioaccumulation, and biosorption capacity to lead (Pb2+ ). Recombinant MT2A and MT3 strains expressing MT were successfully generated. Minimum inhibition concentrations (MIC) of Pb for MT2A and MT3 were found to be 1750 and 2000 mg L-1 , respectively. Pb2+ resistance and bioaccumulation capacity of MT3 were higher than MT2A. Therefore, only MT3 biosorbent was used in Pb2+ biosorption, and its efficiency was examined by performing experiments in a batch system. Pb2+ biosorption by MT3 was evaluated in terms of isotherms, kinetics, and thermodynamics. The results showed that Pb biosorption fits to the Langmuir isotherm model and the pseudo-first-order kinetic model, and the reaction is exothermic. The maximum Pb2+ capacity of the biosorbent was 50 mg Pb2+ g-1 . The potential of MT3 in Pb biosorption was characterized by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM) analyses. The desorption study showed that the sorbent had up to 74% recovery and could be effectively used four times. These findings imply that this biosorbent can be applied as a promising, precise, and effective means of removing Pb2+ from contaminated waters. PRACTITIONER POINTS: In this study, the tolerance levels, bioaccumulation, and biosorption capacities of Pb in aqueous solutions were determined for the first time in recombinant MT2A and MT3 strains in which human MT2A and MT3 genes were cloned. The biosorbent of MT3, which was determined to be more effective in Pb bioaccumulation, was synthesized and used in Pb biosorption. The Pb biosorption mechanism of MT3 biosorbent was identified using isotherm modeling, kinetic modeling, and thermodynamic studies. The maximum Pb removal percentage capacity of the biosorbent was 90%, whereas the maximum biosorption capacity was up to 50 mg Pb2+ g-1 . These results indicated that MT3 biosorbent has a higher Pb biosorption capacity than existing recombinant biosorbents. MT3 biosorbent can be used as a promising and effective biosorbent for removing Pb from wastewater.

Plant growth-promoting rhizobacteria: a potential bio-asset for restoration of degraded soil and crop productivity with sustainable emerging techniques

The rapid expansion of degraded soil puts pressure on agricultural crop yield while also increasing the likelihood of food scarcity in the near future at the global level. The degraded soil does not suit plants growth owing to the alteration in biogeochemical cycles of nutrients, soil microbial diversity, soil organic matter, and increasing concentration of heavy metals and organic chemicals. Therefore, it is imperative that a solution should be found for such emerging issues in order to establish a sustainable future. In this context, the importance of plant growth-promoting rhizobacteria (PGPR) for their ability to reduce plant stress has been recognized. A direct and indirect mechanism in plant growth promotion is facilitated by PGPR via phytostimulation, biofertilizers, and biocontrol activities. However, plant stress mediated by deteriorated soil at the field level is not entirely addressed by the implementation of PGPR at the field level. Thus, emerging methods such as CRISPR and nanotechnological approaches along with PGPR could manage degraded soil effectively. In the pursuit of the critical gaps in this respect, the present review discusses the recent advancement in PGPR action when used along with nanomaterials and CRISPR, impacting plant growth under degraded soil, thereby opening a new horizon for researchers in this field to mitigate the challenges of degraded soil.

Evaluation of copper-tolerant fungi isolated from Sarcheshmeh copper mine of Iran

Mycoremediation, a subset of bioremediation, is considered an advanced method to eliminate environmental contaminations. To identify tolerant fungi to copper contamination and study the related gene expression, sampling was carried out from the soil of "Sarcheshmeh Copper Mine," which is one of the biggest open-cast copper mines in the world. A total of 71 fungal isolates were obtained and purified. Afterward, the inhibitory effect of different concentrations (1000, 1500, 3500, 4000, and 5500 ppm) of copper sulfate on mycelial growth was evaluated. Results indicated that only 5500 ppm of copper sulfate inhibited fungal growth compared to the control. Based on the bioassay experiments, three isolates including S3-1, S3-21, and S1-7, which were able to grow on solid and broth medium containing 5500 ppm of copper sulfate at different pH conditions, were selected and identified using molecular approaches. Also, laccase and metallothionein gene expression has been assessed in these isolates. According to the molecular identification using ITS1-5.8S- ITS2 region, isolates S3-1 and S1-7 were identified as Pleurotus eryngii, and isolate S3-21 belonged to the genus Sarocladium. In addition, P. eryngii showed laccase gene expression reduction after 8 days of exposure to copper sulfate. While in the genus Sarocladium, it increased (almost 2 times) from 6 to 8 days. Besides, metallothionein gene expression has increased from 6 to 8 days of copper sulfate treatment compared to the control which reveals its role in copper tolerance of all studied isolates. In this study, Pleurotus eryngii and Sarocladium sp. are introduced as heavy metal tolerant fungi and the related gene expression to copper tolerance was studied for the first time in Iran.

Safe Production Strategies for Soil-Covered Cultivation of Morel in Heavy Metal-Contaminated Soils

Morel is a popular edible mushroom with considerable medicinal and economic value which has garnered global popularity. However, the increasing heavy metal (HM) pollution in the soil presents a significant challenge to morels cultivation. Given the susceptibility of morels to HM accumulation, the quality and output of morels are at risk, posing a serious food safety concern that hinders the development of the morel industry. Nonetheless, research on the mechanism of HM enrichment and mitigation strategies in morel remains scarce. The morel, being cultivated in soil, shows a positive correlation between HM content in its fruiting body and the HM content in the soil. Therefore, soil remediation emerges as the most practical and effective approach to tackle HM pollution. Compared to physical and chemical remediation, bioremediation is a low-cost and eco-friendly approach that poses minimal threats to soil composition and structure. HMs easily enriched during morels cultivation were examined, including Cd, Cu, Hg, and Pb, and we assessed soil passivation technology, microbial remediation, strain screening and cultivation, and agronomic measures as potential approaches for HM pollution prevention. The current review underscores the importance of establishing a comprehensive system for preventing HM pollution in morels.

Magnetic nanoparticle-assisted colonization of synthetic bacteria on plant roots for improved phytoremediation of heavy metals

Phytoremediation is a facile strategy to remove environmental heavy metals by using metal-accumulating plants from the rhizosphere environment. However, its efficiency is frequently compromised by the weak activity of rhizosphere microbiomes. This study developed a magnetic nanoparticle-assisted root colonization technique of synthetic functional bacteria to regulate rhizosphere microbiome composition for enhanced phytoremediation of heavy metals. The iron oxide magnetic nanoparticles with the size of 15-20 nm were synthesized and grafted by chitosan, a natural bacterium-binding polymer. The synthetic Escherichia coli SynEc2, which highly exposed an artificial heavy metal-capturing protein, was then introduced with the magnetic nanoparticles to bind the Eichhornia crassipes plants. Confocal microscopy, scanning electron microscopy, and microbiome analysis revealed that the grafted magnetic nanoparticles strongly promoted colonization of the synthetic bacteria on the plant roots, leading to remarkable change of rhizosphere microbiome composition, with the increase in the abundance of Enterobacteriaceae, Moraxellaceae, and Sphingomonadaceae. Histological staining and biochemical analysis further showed that the combination of SynEc2 and the magnetic nanoparticles protected the plants from heavy metal-induced tissue damage, and increased plant weights from 29 g to 40 g. Consequently, the plants with the assistance of synthetic bacteria and the magnetic nanoparticles in combination exhibited much higher heavy metal-removing capacity than the plants treated by the synthetic bacteria or the magnetic nanoparticles alone, leading to the decrease in the heavy metal levels from 3 mg/L to 0.128 mg/L for cadmium, and to 0.032 mg/L for lead. This study provided a novel strategy to remodel rhizosphere microbiome of metal-accumulating plants by integrating synthetic microbes and nanomaterials for improving the efficiency of phytoremediation.

Stress mitigation by riparian flora in industrial contaminated area of River Chenab Punjab, Pakistan

Faisalabad is a major industrial area in Pakistan's Punjab province that discharges wastewater into the Chenab River. Industrial effluents in Faisalabad are predicted to pose a significant threat to the riparian vegetation of the Chenab River and nearby vegetation. Heavy metal pollution of plants, water, and soils is one of the biggest problems worldwide that needs to be addressed because heavy metals above normal levels are extremely dangerous to both riparian vegetation and wildlife. The results indicated high levels of pollution in the industrial effluents as well as in the river in terms of salinity, metal toxicity, TSS, TDS, SAR, the acidic and alkaline nature of the industrial effluents, and the spread of industrial effluents up to 15 square kilometres in the Chenab River. Despite the higher pollution, four plants were found at all sites: Calotropis procera, Phyla nodiflora, Eclipta alba and Ranunculus sceleratus. It was found that most of the selected plants were phytoaccumulators, making them best suited to survive in harsh environments such as those with industrial pollution. The Fe concentration in the plant constituents was the highest, along with Zn, Pb, Cd, and Cu, all of which were above the permissible limits of the WHO. The metal transfer factor (MTF) was higher in most of the plants studied, and even exceeded 10 at some severely affected sites. Calotropis procera proved to be the most suitable plant for growth on drainage systems and also at river sites, as it had the highest importance value across all sites and seasons.

Phytoremediation efficiency of Vigna mungo with the amalgamation of indigenous metal tolerant bacterial strain on metal polluted agriculture soil

This research was performed to evaluate physico-chemical properties of farmland soil nearby the magnesite mine site. Unexpectedly, few physico-chemical properties were crossing the acceptable limits. Particularly, the quantities of Cd (112.34 ± 3.25), Pb (386.42 ± 11.71), Zn (854.28 ± 3.53), and Mn (2538 ± 41.11) were crossing the permissible limits. Among 11 bacterial cultures isolated from the metal contaminated soil, 2 isolates names as SS1 and SS3 showed significant multi-metal tolerance up to the concentration of 750 mg L^-1. Furthermore, these strains also showed considerable metal mobilization as well as absorption ability on metal contaminated soil under in-vitro conditions. In a short duration of treatment, these isolates effectively mobilize and absorb the metals from the polluted soil. The results obtained from the greenhouse investigation with Vigna mungo revealed that the among various treatment (T1 to T5) groups, the T3 (V.mungo + SS1+SS3) showed remarkable phytoremediation potential (Pb: 50.88, Mn: 152, Cd: 14.54, and Zn: 67.99 mg kg^-1) on metal contaminated soil. Furthermore, these isolates influence the growth as well as biomass of V.mungo under greenhouse conditions on metal contaminated soil. These findings suggest that combining multi-metal tolerant bacterial isolates can improve the phytoextraction efficiency of V.mungo on metal-contaminated soil.

More effective application of biochar-based immobilization technology in the environment: Understanding the role of biochar

In recent years, biochar-based immobilization technology (BIT) has been widely used to treat different environmental issues because of its cost-effectiveness and high removal performance. However, the complexity of the real environment is always ignored, which hinders the transfer of the BIT from lab-scale to commercial applications. Therefore, in this review, the analysis is performed separately on the internal side of the BIT (microbial fixation and growth) and on the external side of the BIT (function) to achieve effective BIT performance. Importantly, the internal two stages of BIT have been discussed concisely. Further, the usage of BIT in different areas is summarized precisely. Notably, the key impacts were systemically analyzed during BIT applications including environmental conditions and biochar types. Finally, the suggestions and perspectives are elucidated to solve current issues regarding BIT.

Phytoremediation of Potentially Toxic Elements: Role, Status and Concerns

Environmental contamination with a myriad of potentially toxic elements (PTEs) is triggered by various natural and anthropogenic activities. However, the industrial revolution has increased the intensity of these hazardous elements and their concentration in the environment, which, in turn, could provoke potential ecological risks. Additionally, most PTEs pose a considerable nuisance to human beings and affect soil, aquatic organisms, and even nematodes and microbes. This comprehensive review aims to: (i) introduce potentially toxic elements; (ii) overview the major sources of PTEs in the major environmental compartments; (iii) briefly highlight the major impacts of PTEs on humans, plants, aquatic life, and the health of soil; (iv) appraise the major methods for tackling PTE-caused pollution; (v) discuss the concept and applications of the major eco-technological/green approaches (comprising phytoextraction, rhizofiltration, phytostabilization, phytovolatilization, and phytorestoration); (vi) highlight the role of microbes in phytoremediation under PTE stress; and (vii) enlighten the major role of genetic engineering in advancing the phytoremediation of varied PTEs. Overall, appropriate strategies must be developed in order to stop gene flow into wild species, and biosafety issues must be properly addressed. Additionally, consistent efforts should be undertaken to tackle the major issues (e.g., risk estimation, understanding, acceptance and feasibility) in order to guarantee the successful implementation of phytoremediation programs, raise awareness of this green technology among laymen, and to strengthen networking among scientists, stakeholders, industrialists, governments and non-government organizations.

Phytoremediation technologies and their mechanism for removal of heavy metal from contaminated soil: An approach for a sustainable environment

The contamination of soils with heavy metals and its associated hazardous effects are a thrust area of today's research. Rapid industrialization, emissions from automobiles, agricultural inputs, improper disposal of waste, etc., are the major causes of soil contamination with heavy metals. These contaminants not only contaminate soil but also groundwater, reducing agricultural land and hence food quality. These contaminants enter the food chain and have a severe effect on human health. It is important to remove these contaminants from the soil. Various economic and ecological strategies are required to restore the soils contaminated with heavy metals. Phytoremediation is an emerging technology that is non-invasive, cost-effective, and aesthetically pleasing. Many metal-binding proteins (MBPs) of the plants are significantly involved in the phytoremediation of heavy metals; the MBPs include metallothioneins; phytochelatins; metalloenzymes; metal-activated enzymes; and many metal storage proteins, carrier proteins, and channel proteins. Plants are genetically modified to enhance their phytoremediation capacity. In Arabidopsis, the expression of the mercuric ion-binding protein in Bacillus megaterium improves the metal accumulation capacity. The phytoremediation efficiency of plants is also enhanced when assisted with microorganisms, biochar, and/or chemicals. Removing heavy metals from agricultural land without challenging food security is almost impossible. As a result, crop selections with the ability to sequester heavy metals and provide food security are in high demand. This paper summarizes the role of plant proteins and plant-microbe interaction in remediating soils contaminated with heavy metals. Biotechnological approaches or genetic engineering can also be used to tackle the problem of heavy metal contamination.

Challenges of Urban Artificial Landscape Water Bodies: Treatment Techniques and Restoration Strategies towards Ecosystem Services Enhancement

With the rapid adoption of green infrastructure and nature-based solutions for a low-impact development, much consideration is given to ecosystem services and the ecological enhancement in modern planning of urban spaces. Artificial landscape water bodies have, in recent years, been utilized to enhance the ecological quality of urban environments. As an environmentally friendly measure, the water source of these waters has predominantly been adopting reclaimed water (treated wastewater). As a result, landscape water bodies are often eutrophic, exhibiting poor hydrodynamics, with lengthy water change cycles, creating the ideal environment for algal blooms that negatively impact the aesthetic appeal of these landscape waters. Based on the existing literature, this paper summarizes the treatment techniques and strategies employed in enhancing the quality of urban artificial landscape water bodies and providing integrated design solutions in the urban environment.

Engineering microbes for enhancing the degradation of environmental pollutants: A detailed review on synthetic biology

Anthropogenic activities resulted in the deposition of huge quantities of contaminants such as heavy metals, dyes, hydrocarbons, etc into an ecosystem. The serious ill effects caused by these pollutants to all living organisms forced in advancement of technology for degrading or removing these pollutants. This degrading activity is mostly depending on microorganisms owing to their ability to survive in harsh adverse conditions. Though native strains possess the capability to degrade these pollutants the development of genetic engineering and molecular biology resulted in engineering approaches that enhanced the efficiency of microbes in degrading pollutants at faster rate. Many bioinformatics tools have been developed for altering/modifying genetic content in microbes to increase their degrading potency. This review provides a detailed note on engineered microbes - their significant importance in degrading environmental contaminants and the approaches utilized for modifying microbes. The genes responsible for degrading the pollutants have been identified and modified fir increasing the potential for quick degradation. The methods for increasing the tolerance in engineered microbes have also been discussed. Thus engineered microbes prove to be effective alternate compared to native strains for degrading pollutants.

Biochar-microorganism interactions for organic pollutant remediation: Challenges and perspectives

Numerous harmful chemicals are introduced every year in the environment through anthropogenic and geological activities raising global concerns of their ecotoxicological effects and decontamination strategies. Biochar technology has been recognized as an important pillar for recycling of biomass, contributing to the carbon capture and bioenergy industries, and remediation of contaminated soil, sediments and water. This paper aims to critically review the application potential of biochar with a special focus on the synergistic and antagonistic effects on contaminant-degrading microorganisms in single and mixed-contaminated systems. Owing to the high specific surface area, porous structure, and compatible surface chemistry, biochar can support the proliferation and activity of contaminant-degrading microorganisms. A combination of biochar and microorganisms to remove a variety of contaminants has gained popularity in recent years alongside traditional chemical and physical remediation technologies. The microbial compatibility of biochar can be improved by optimizing the surface parameters so that toxic pollutant release is minimized, biofilm formation is encouraged, and microbial populations are enhanced. Biocompatible biochar thus shows potential in the bioremediation of organic contaminants by harboring microbial populations, releasing contaminant-degrading enzymes, and protecting beneficial microorganisms from immediate toxicity of surrounding contaminants. This review recommends that biochar-microorganism co-deployment holds a great potential for the removal of contaminants thereby reducing the risk of organic contaminants to human and environmental health.

Functional microbiome strategies for the bioremediation of petroleum-hydrocarbon and heavy metal contaminated soils: A review

Petroleum hydrocarbons and heavy metals are the two major soil contaminants that are released into the environment in the forms of industrial effluents. These contaminants exert serious impacts on human health and the sustainability of the environment. In this context, remediation of these pollutants via a biological approach can be effective, low-cost, and eco-friendly approach. The implementation of microorganisms and metagenomics are regarded as the advanced solution for remediating such pollutants. Further, microbiomes can overcome this issue via adopting specific structural, functional and metabolic pathways involved in the microbial community to degrade these pollutants. Genomic sequencing and library can effectively channelize the degradation of these pollutants via microbiomes. Nevertheless, more advanced technology and reliable strategies are required to develop. The present review provides insights into the role of microbiomes to effectively remediate/degrade petroleum hydrocarbons and heavy metals in contaminated soil. The possible degradation mechanisms of these pollutants have also been discussed in detail along with their existing limitations. Finally, prospects of the bioremediation strategies using microbiomes are discussed.

Engineered bacterium-binding protein promotes root recruitment of functional bacteria for enhanced cadmium removal from wastewater by phytoremediation

Functional bacteria promote the efficiency of phytoremediation by enhancing plant growth and participating in decontamination. However, their activity is frequently compromised by the weakness of their interaction with plant roots. In this study, we designed the artificial protein LcGC composed of a bacterium-binding domain, a GFP fluorescence reporter, and a carbohydrate-binding domain to function as a physical contact between functional bacteria and plant roots. This protein was then expressed in an engineered yeast cell factory and extracted to assess its effect on rhizosphere microbiome composition, plant growth, and cadmium removal in a simulated phytoremediation system containing the remediation plant Lemna minor and the functional heavy metal-capturing bacteria Cupriavidus taiwanensis and Pseudomonas putida. LcGC efficiently bound bacterial cell wall components and glucan, endowing it high efficiency to bind both functional bacteria and plant roots. Scanning microscopy and microbiome analysis revealed that LcGC enhanced root recruitment and colonization of functional bacteria on the root surfaces. Furthermore, LcGC with the aid of single C. taiwanensis or of C. taiwanensis and P. putida in combination promoted plant growth, enhanced tolerance to cadmium-induced oxidative stress, and consequently improved cadmium-removing capacity of the plants, with the percent of cadmium removal reaching up to 91% for LcGC plus C. taiwanensis, and to 96% for LcGC plus C. taiwanensis and P. putida on day 7. This study provided a physical contact-based strategy to enhance the interaction between functional microbes and plant roots for efficient phytoremediation.

Effects of Different Native Plants on Soil Remediation and Microbial Diversity in Jiulong Iron Tailings Area, Jiangxi

Phytoremediation is an important solution to heavy metal pollution in soil. However, the impact of plants on microbial communities in contaminated soil also requires attention. Community-level physiological profiling (CLPP) based on the Biolog™ EcoPlate and high-throughput sequencing were used to study the soil microbial community in this article. The rhizosphere and bulk soil samples of six native species were collected from the iron mine tailings on Jiulong Mountain, Jiangxi Province. According to the average well color development (AWCD), all plants improved the activity and diversity of the contaminated soil microbial community to varying degrees. Cunninghamia lanceolate is considered to have good effects and led to the appearance of Cunninghamia lanceolata > Zelkova schneideriana > Toona ciliata > Alnus cremastogyne > Cyclobalanopsis myrsinifolia > Pinus elliottii. The Shannon–Wiener diversity index and principal component analysis (PCA) show that the evenness and dominance of soil microbial communities of several plants are structurally similar to those of uncontaminated soil (UNS). The results of high-throughput sequencing indicated that the bacterial community diversity of C. lanceolata, A. cremastogyne, and P. elliottii is similar to UNS, while fungal community diversity is different from UNS. C. lanceolata has a better effect on soil nutrients, C. myrsinifolia and P. elliottii may have a better effect on decreasing the Cu content. The objective of this study was to assess the influence of native plants on microbial communities in soils and the soil remediation capacity. Mortierellomycota was the key species for native plants to regulate Cu and microbial community functions. Native plants have decisive influence on microbial community diversity.

Removal of toxic heavy metals using genetically engineered microbes: Molecular tools, risk assessment and management strategies

The direct release of industrial effluent into the water and other anthropogenic activities causes water pollution. Heavy metal ions are the primary contaminant in the industrial effluents which are exceptionally toxic at low concentrations, terribly disturb the endurance equilibrium of activities in the eco-system and be remarkably hazardous to human health. Different conventional treatment methodologies were utilized for the removal of toxic pollutants from the contaminated water which has several drawbacks such as cost-ineffective and lower efficiency. Recently, genetically modified micro-organisms (GMMs) stand-out for the removal of toxic heavy metals are viewed as an economically plausible and environmentally safe technique. GMMs are microorganisms whose genetic material has been changed utilizing genetic engineering techniques that exhibit enhanced removal efficiency in comparison with the other treatment methodologies. The present review comments the GMMs such as bacteria, algae and fungi and their potential for the removal of toxic heavy metals. This review provides current aspects of different advanced molecular tools which have been used to manipulate micro-organisms through genetic expression for the breakdown of metal compounds in polluted areas. The strategies, major limitations and challenges for genetic engineering of micro-organisms have been reviewed. The current review investigates the approaches working on utilizing genetically modified micro-organisms and effective removal techniques.

Antimicrobial Activity of Sunflower (Helianthus annuus) Seed for Household Domestic Water Treatment in Buhera District, Zimbabwe

Various plants have been used by humans for a very long time, and the uses vary, including food, medicine, toothpaste, dyes, food preservatives, water treatment, and beer brewing, among others. For food preservation and water treatment, the plant must have antimicrobial properties which are biocidal. For this research, extracts were obtained from sunflower (Helianthus annuus) seeds. The extracts were assessed for the presence of antimicrobial properties against three groups of bacteria, including faecal coliforms, total coliforms, and Escherichia coli (E. coli). Dosages of ground sunflower seeds ranging from 0.5 g to 4 g were administered to the three bacterial species and their susceptibilities to the antimicrobial agents were measured and recorded. The results indicate the presence of antimicrobial properties in sunflower. The antimicrobial activities were more effective on E. coli, with an average zone of inhibition of 12 mm with a 3 g dosage of sunflower seed extract. This was followed by total coliforms (11 mm) and lastly faecal coliforms (11 mm). These findings suggested that sunflower seeds proved to be potentially effective in treating water against microbial contaminants.

Utilization of Legume-Nodule Bacterial Symbiosis in Phytoremediation of Heavy Metal-Contaminated Soils

Simple Summary

The legume–rhizobium symbiosis is one of the most beneficial interactions with high importance in agriculture, as it delivers nitrogen to plants and soil, thereby enhancing plant growth. Currently, this symbiosis is increasingly being exploited in phytoremediation of metal contaminated soil to improve soil fertility and simultaneously metal extraction or stabilization. Rhizobia increase phytoremediation directly by nitrogen fixation, protection of plants from pathogens, and production of plant growth-promoting factors and phytohormones.

Abstract

With the increasing industrial activity of the growing human population, the accumulation of various contaminants in soil, including heavy metals, has increased rapidly. Heavy metals as non-biodegradable elements persist in the soil environment and may pollute crop plants, further accumulating in the human body causing serious conditions. Hence, phytoremediation of land contamination as an environmental restoration technology is desirable for both human health and broad-sense ecology. Legumes (Fabaceae), which play a special role in nitrogen cycling, are dominant plants in contaminated areas. Therefore, the use of legumes and associated nitrogen-fixing rhizobia to reduce the concentrations or toxic effects of contaminants in the soil is environmentally friendly and becomes a promising strategy for phytoremediation and phytostabilization. Rhizobia, which have such plant growth-promoting (PGP) features as phosphorus solubilization, phytohormone synthesis, siderophore release, production of beneficial compounds for plants, and most of all nitrogen fixation, may promote legume growth while diminishing metal toxicity. The aim of the present review is to provide a comprehensive description of the main effects of metal contaminants in nitrogen-fixing leguminous plants and the benefits of using the legume–rhizobium symbiosis with both wild-type and genetically modified plants and bacteria to enhance an efficient recovery of contaminated lands.

Root-associated microbiota drive phytoremediation strategies to lead of Sonchus Asper (L.) Hill as revealed by intercropping-induced modifications of the rhizosphere microbiome

Intercropping or assistant endophytes promote phytoremediation capacities of hyperaccumulators and enhance their tolerance to heavy metal (HM) stress. Findings from a previous study showed that intercropping the hyperaccumulator Sonchus asper (L.) Hill grown in HM-contaminated soils with maize improved the remediating properties and indicated an excluder-to-hyperaccumulator switched mode of action towards lead. In the current study, RNA-Seq analysis was conducted on Sonchus roots grown under intercropping or monoculture systems to explore the molecular events underlying this shift in lead sequestering strategy. The findings showed that intercropping only slightly affects S. asper transcriptome but significantly affects expression of root-associated microbial genomes. Further, intercropping triggers significant reshaping of endophytic communities associated with a 'root-to-shoot' transition of lead sequestration and improved phytoremediation capacities of S. asper. These findings indicate that accumulator activities of a weed are partially attributed to the root-associated microbiota, and a complex network of plant-microbe-plant interactions shapes the phytoremediation potential of S. asper. Analysis showed that intercropping may significantly change the structure of root-associated communities resulting in novel remediation properties, thus providing a basis for improving phytoremediation practices to restore contaminated soils.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Manganese-doped ferrihydrite/cellulose/polyvinyl alcohol composite membrane: Easily recyclable adsorbent for simultaneous removal of arsenic and cadmium from soil

Simultaneous removal of arsenic (As) and cadmium (Cd) from soil has been a matter of great concern. In this study, manganese-doped ferrihydrite/cellulose/polyvinyl alcohol composite membranes were prepared via loading manganese-doped ferrihydrite on cellulose mesh and then wrapping with polyvinyl alcohol. The obtained composite membranes exhibited excellent mechanical properties and could be easily separated from soil. The adsorption capacities of Cd(II) and As(III) on the composite membrane were 11.11 mg/g and 72.08 mg/g respectively. After mixing the composite membrane with polluted soil at dosage of 0.3% (w/w), the removal efficiency of the toxicity characteristic leaching procedure leachable As and Cd reached 65% and 69% respectively with one cycle. The stability and reusability of composite membrane were demonstrated by no decrease in tensile strength and the retention of 94% and 96% of As(III) and Cd(II) removal efficiency respectively after four adsorption cycles. The prepared composite membrane had application prospect in the remediation of As and Cd co-polluted soil.

Health hazards of hexavalent chromium (Cr (VI)) and its microbial reduction

Industrial effluents/wastewater are the main sources of hexavalent chromium (Cr (VI)) pollutants in the environment. Cr (VI) pollution has become one of the world’s most serious environmental concerns due to its long persistence in the environment and highly deadly nature in living organisms. To its widespread use in industries Cr (VI) is highly toxic and one of the most common environmental contaminants. Cr (VI) is frequently non-biodegradable in nature, which means it stays in the environment for a long time, pollutes the soil and water, and poses substantial health risks to humans and wildlife. In living things, the hexavalent form of Cr is carcinogenic, genotoxic, and mutagenic. Physico-chemical techniques currently used for Cr (VI) removal are not environmentally friendly and use a large number of chemicals. Microbes have many natural or acquired mechanisms to combat chromium toxicity, such as biosorption, reduction, subsequent efflux, or bioaccumulation. This review focuses on microbial responses to chromium toxicity and the potential for their use in environmental remediation. Moreover, the research problem and prospects for the future are discussed in order to fill these gaps and overcome the problem associated with bacterial bioremediation’s real-time applicability.

The microorganism-plant system for remediation of soil exposed to coal mining

Introduction. Coal mining causes a radical transformation of the soil cover. Research is required into modern methods and complementary technologies for monitoring technogenic landscapes and their remediation. Our study aimed to assess soil and rhizosphere microorganisms and their potential uses for the remediation of technogenic soils in Russian coal regions. Study objects and methods. We reviewed scientific articles published over the past five years, as well as those cited in Scopus and Web of Science. Results and discussion. Areas lying in the vicinity of coal mines and coal transportation lines are exposed to heavy metal contamination. We studied the application of soil remediation technologies that use sorbents from environmentally friendly natural materials as immobilizers of toxic elements and compounds. Mycorrhizal symbionts are used for soil decontamination, such as arbuscular mycorrhiza with characteristic morphological structures in root cortex cells and some mycotallia in the form of arbuscules or vesicles. Highly important are Gram-negative proteobacteria (Agrobacterium, Azospirillum, Azotobacter, Burkholderia, Bradyrizobium, Enterobacter, Pseudomonas, Klebsiella, Rizobium), Gram-positive bacteria (Bacillus, Brevibacillus, Paenibacillus), and Grampositive actinomycetes (Rhodococcus, Streptomyces, Arhtrobacter). They produce phytohormones, vitamins, and bioactive substances, stimulating plant growth. Also, they reduce the phytopathogenicity of dangerous diseases and harmfulness of insects. Finally, they increase the soil’s tolerance to salinity, drought, and oxidative stress. Mycorrhizal chains enable the transport and exchange of various substances, including mineral forms of nitrogen, phosphorus, and organic forms of C3 and C4 plants. Microorganisms contribute to the removal of toxic elements by absorbing, precipitating or accumulating them both inside the cells and in the extracellular space. Conclusion. Our review of scientific literature identified the sources of pollution of natural, agrogenic, and technogenic landscapes. We revealed the effects of toxic pollutants on the state and functioning of living systems: plants, animals, and microorganisms. Finally, we gave examples of modern methods used to remediate degraded landscapes and reclaim disturbed lands, including the latest technologies based on the integration of plants and microorganisms.

Cleaner technologies to combat heavy metal toxicity

Heavy metals frequently occur as silent poisons present in our daily diet, the environment we live and the products we use, leaving us victims to various associated drastic health and ecological bad effects even in meagre quantities. The prevalence of heavy metals can be traced from children's toys, electronic goods, industrial effluents, pesticide preparation, and even in drinking water in some instances; necessitating methods to remediate them. The current review discusses the various physicochemical and biological methods employed to tackle the problem of heavy metal pollution. Apart from the conventional methods following the principles of adsorption, precipitation, coagulation, and various separation techniques, the advancements made in the directions of biological heavy metal detoxification using microbes, plants, algae have been critically analyzed to identify the specific utility of different agents for specific heavy metal removal. The review paper is a nutshell of different heavy metal remediation strategies, their merits, demerits, and modifications done to alleviate process of heavy metal pollution.

Heavy Metals and Human Health: Possible Exposure Pathways and the Competition for Protein Binding Sites

Heavy metals enter the human body through the gastrointestinal tract, skin, or via inhalation. Toxic metals have proven to be a major threat to human health, mostly because of their ability to cause membrane and DNA damage, and to perturb protein function and enzyme activity. These metals disturb native proteins’ functions by binding to free thiols or other functional groups, catalyzing the oxidation of amino acid side chains, perturbing protein folding, and/or displacing essential metal ions in enzymes. The review shows the physiological and biochemical effects of selected toxic metals interactions with proteins and enzymes. As environmental contamination by heavy metals is one of the most significant global problems, some detoxification strategies are also mentioned.

Microbe-assisted phytoremediation of environmental pollutants and energy recycling in sustainable agriculture

The perception of phytoremediation is efficiently utilized as an eco-friendly practice of green plants combating and cleaning up the stressed environment without harming it. The industrial revolution was followed by the green revolution which fulfilled the food demands of the growing population caused an increase in yield per unit area in crop production, but it also increased the use of synthetic fertilizers in agriculture. Globally, the intensive use of inorganic fertilizers in agriculture has led to serious health problems and irreversible environmental damage. Biofertilizers improve the growth of the plant and can be applied as an alternative to chemical/synthetic fertilizers. Cyanobacteria, bacteria, and fungi are known as some of the principal microbe groups used to produce biofertilizers that form symbiotic associations with plants. Microorganisms perform a key role in phosphate solubilization and mobilization, nitrogen fixation, nutrient management, biotic elicitors and probiotics, and pollution management (biodegradation agents), specifically bacteria which also help in atmospheric nitrogen fixation and are thus available for the growth of the plant. Management or biodegradation of hazardous chemical residues and heavy metals produced by a huge number of large-scale industries should be given primary importance to be transformed by various bacterial strains, fungi, algae. Currently, modern omics technologies such as metagenomic, transcriptomic, and proteomic are being used to develop strategies for studying the ecology of microorganisms, as well as their use in environmental monitoring and bioremediation. This review briefly discusses some of the major groups of microorganisms that can perform different functions responsible for plant health, crop production, phytoremediation and also focus on the omics techniques reportedly used in environmental monitoring to tackle the pollution load.

Enhanced Lead Phytoextraction by Endophytes from Indigenous Plants

Lead (Pb) is one of the most common metal pollutants in soil, and phytoextraction is a sustainable and cost-effective way to remove it. The purpose of this work was to develop a phytoextraction strategy able to efficiently remove Pb from the soil of a decommissioned fuel depot located in Italy by the combined use of EDTA and endophytic bacteria isolated from indigenous plants. A total of 12 endophytic strains from three native species (Lotus cornicolatus, Sonchus tenerrimus, Bromus sterilis) were isolated and selected to prepare a microbial consortium used to inoculate microcosms of Brassica juncea and Helianthus annuus. As for B. juncea, experimental data showed that treatment with microbial inoculum alone was the most effective in improving Pb phytoextraction in shoots (up to 25 times more than the control). In H. annuus, on the other hand, the most effective treatment was the combined treatment (EDTA and inoculum) with up to three times more Pb uptake values. These results, also validated by the metagenomic analysis, confirm that plant-microbe interaction is a crucial key point in phytoremediation.

Metal and metal(loids) removal efficiency using genetically engineered microbes: Applications and challenges

The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment.

A holistic approach to soil contamination and sustainable phytoremediation with energy crops in the Aegean Region of Turkey

The objective of this current review article is to evaluate the current knowledge of the contaminated soil in the study area based on reports and the results of previous experimental studies in the literature and to discuss the feasibility of phytoremediation with biofuel production using energy crops. The results indicated that the soil contamination was related mainly to the thermal power plant and mining activities in Kütahya, high industrial activity in İzmir, heavy metal and radioactive pollution in Manisa and Muğla. Moreover, the sources of the contamination are geothermal resources and transportation in Aydın and Denizli, respectively. However, soil pollution in Afyonkarahisar and Uşak provinces has not been discussed due to a lack of detailed reports and data in the literature. Besides, energy crops such as Zea mays, Ricinus communis, and Gossypium hirsitum were identified as appropriate candidates for İzmir, Denizli, Manisa, and Aydın due to being resistant to the arid climate. In Muğla province, Eucalyptus grandis and Eucalyptus bicostata can be cultivated because of having adaptation to moderate climatic conditions. Ricinus communis and Helianthus annuus were determined to be very suitable energy crops for the phytoremediation of many heavy metals in Kütahya. The review promotes the development of economic, environmental, and social benefits to regain the contaminated areas through phytoremediation. The findings of the study are important for creating sustainable solutions for remediation of polluted soils in Turkey, as well as for shedding light on the process of establishing appropriate policies to make soils contaminated suitable for agriculture.