Mulberry-like Au@PtPd porous nanorods composites as signal amplifiers for sensitive detection of CEA

Near-infrared light-enhanced colorimetric signal amplification strategy for tumor marker detection based on MoS2/CuO/Au nanocomposite

A novel signal amplification strategy was developed by combining near-infrared light with MoS2/CuO/Au nanocomposite for building a colorimetric immunoassay. First, MoS2/CuO/Au nanocomposite was synthesized by precipitation and photoreduction methods and characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). MoS2/CuO/Au nanocomposite has oxidase-like activity and can oxidize TMB to form a blue product (TMBox). Further, the catalytic oxidation of TMB was accelerated under near-infrared (NIR) laser radiation. The sandwich-type colorimetric immunoassay was constructed using MoS2/CuO/Au nanocomposite. Under the enhancement of near-infrared light, carcinoembryonic antigen (CEA) was sensitively detected in the range 0.1 to 40 ng/mL with the limit of detection of 0.03 ng/mL. Moreover, the immunosensor has excellent selectivity and anti-interference, good repeatability, and stability.

Dendritic quinary PtRhMoCoFe high-entropy alloy as a robust immunosensing nanoplatform for ultrasensitive detection of biomarker

Recently, high-entropy alloys have superior physicochemical properties as compared to conventional alloys for their glamorous "cocktail effect". Nevertheless, they are scarcely applied to electrochemical immunoassays until now. Herein, uniform PtRhMoCoFe high-entropy alloyed nanodendrites (HEANDs) were synthesized by a wet-chemical co-reduction method, where glucose and oleylamine behaved as the co-reducing agents. Then, a series of characterizations were conducted to illustrate the synergistic effect among multiple metals and fascinating structural characteristics of PtRhMoCoFe HEANDs. The obtained high-entropy alloy was adopted to build a electrochemical label-free biosensor for ultrasensitive bioassay of biomarker cTnI. In the optimized analytical system, the resultant sensor exhibited a dynamic linear range of 0.0001-200 ng mL-1 and a low detection limit of 0.0095 pg mL-1 (S/N = 3). Eventually, this sensing platform was further explored in serum samples with satisfied recovery (102.0 %). This research renders some constructive insights for synthesis of high-entropy alloys and their expanded applications in bioassays and bio-devices.

Multiplex nanozymatic biosensing of Salmonella on a finger-actuated microfluidic chip

A colorimetric biosensor was elaboratively designed for fast, sensitive and multiplex bacterial detection on a single microfluidic chip using immune magnetic nanobeads for specific bacterial separation, immune gold@platinum palladium nanoparticles for specific bacterial labeling, a finger-actuated mixer for efficient immunoreaction and two coaxial rotatable magnetic fields for magnetic nanobead capture (outer one) and magnet-actuated valve control (inner one). First, preloaded bacteria, nanobeads and nanozymes were mixed through a finger actuator to form nanobead-bacteria-nanozyme conjugates, which were captured by the outer magnetic field. After the inner magnetic field was rotated to successively wash the conjugates and push the H2O2-TMB substrate for resuspending these conjugates, colorless TMB was catalyzed into blue TMBox products, followed by color analysis using ImageJ software for bacterial determination. This simple biosensor enabled multiplex Salmonella detection as low as 9 CFU per sample in 45 min.

Reduced graphene oxide-functionalized polymer microneedle for continuous and wide-range monitoring of lactate in interstitial fluid

Despite substantial developments in minimally invasive lactate monitoring microneedle electrodes, most such electrode developments have focused on either sensitivity or invasiveness while ignoring a wide range of detection, which is the most important factor in measuring the normal range of lactate in interstitial fluid (ISF). Herein, we present a polymer-based planar microneedle electrode fabrication using microelectromechanical and femtosecond laser technology for the continuous monitoring of lactate in ISF. The microneedle is functionalized with two-dimensional reduced graphene oxide (rGO) and electrochemically synthesized platinum nanoparticles (PtNPs). A particular quantity of Nafion (1.25 wt%) is applied on top of the lactate enzyme to create a diffusion-controlled membrane. Due to the combined effects of the planar structure of the microneedle, rGO, and membrane, the biosensor exhibited excellent linearity up to 10 mM lactate with a limit of detection of 2.04 μM, high sensitivity of 43.96 μA mM-1cm-2, a reaction time of 8 s and outstanding stability, selectivity, and repeatability. The feasibility of the microneedle is evaluated by using it to measure lactate concentrations in artificial ISF and human serum. The results demonstrate that the microneedle described here has great potential for use in real-time lactate monitoring for use in sports medicine and treatment.

Disease diagnosis and application analysis of molecularly imprinted polymers (MIPs) in saliva detection

Saliva has significantly evolved as a diagnostic fluid in recent years, giving a non-invasive alternative to blood analysis. A high protein concentration in saliva is delivered directly from the bloodstream, making it a "human mirror" that reflects the body's physiological state. It plays an essential role in detecting diseases in biomedical and fitness monitoring. Molecularly imprinted polymers (MIPs) are biomimetic materials with custom-designed synthetic recognition sites that imitate biological counterparts renowned for sensitive analyte detection. This paper reviews the progress made in research about MIP biosensors for detecting saliva biomarkers. Specifically, we investigate the link between saliva biomarkers and various diseases, providing detailed insights into the corresponding biosensors. Furthermore, we discuss the principles of molecular imprinting for disease diagnostics and application analysis, including recent advances in integrated MIP-sensor technologies for high-affinity analyte detection in saliva. Notably, these biosensors exhibit high discrimination, allowing for the detection of saliva biomarkers linked explicitly to chronic stress disorders, diabetes, cancer, bacterial or viral-induced illnesses, and exposure to illicit toxic substances or tobacco smoke. Our findings indicate that MIP-based biosensors match and perhaps surpass their counterparts featuring integrated natural antibodies in terms of stability, signal-to-noise ratios, and detection limits. Additionally, we highlight the design of MIP coatings, strategies for synthesizing polymers, and the integration of advanced biodevices. These tailored biodevices, designed to assess various salivary biomarkers, are emerging as promising screening or diagnostic tools for real-time monitoring and self-health management, improving quality of life.

Application of Metal-Based Nanomaterials in In Vitro Diagnosis of Tumor Markers: Summary and Prospect

Cancer, which presents with high incidence and mortality rates, has become a significant health threat worldwide. However, there is currently no effective solution for rapid screening and high-quality treatment of early-stage cancer patients. Metal-based nanoparticles (MNPs), as a new type of compound with stable properties, convenient synthesis, high efficiency, and few adverse reactions, have become highly competitive tools for early cancer diagnosis. Nevertheless, challenges such as the difference between the microenvironment of detected markers and the real-life body fluids remain in achieving widespread clinical application of MNPs. This review provides a comprehensive review of the research progress made in the field of in vitro cancer diagnosis using metal-based nanoparticles. By delving into the characteristics and advantages of these materials, this paper aims to inspire and guide researchers towards fully exploiting the potential of metal-based nanoparticles in the early diagnosis and treatment of cancer.

Mulberry-like porous-hollow AuPtAg nanorods for electrochemical immunosensing of biomarker myoglobin

Mulberry-like AuPtAg porous hollow nanorods (PHNR) were facilely synthesized for the first time via a wet chemical method, where Au nanorods (Au NR) behaved as sacrificed template. The anisotropic oriented growth and etching process are involved in this synthesis. Their structural and electronic characteristics were scrutinously examined by TEM, EDS, XPS, and electrochemical techniques. The AuPtAg PHNR provided a large specific surface area and exposed a large number of active sites, showing highly enhanced catalytic activity. On this foundation, a label-free electrochemical immunosensor was developed for myoglobin (Myo) assay based on the AuPtAg PHNR. Further, the built sensor exhibited fast and ultrasensitive responses in a linear range of 0.0001 ~ 1000 ng mL^-1 with a low limit of detection (LOD = 0.46 pg mL^-1, S/N = 3), and enabled efficient application to human serum samples with acceptable results. Consequently, the developed AuPtAg PHNR-based platform has a broad prospect in practically monitoring Myo and other biomarkers in clinics.

Dual-mode biosensor platform based on synergistic effects of dual-functional hybrid nanomaterials

Detection of biomarkers is very vital in the prevention, diagnosis and treatment of diseases. However, due to the poor accuracy and sensitivity of the constructed biosensors, we are now facing great challenges. In addressing these problems, nanohybrid-based dual mode biosensors including optical-optical, optical-electrochemical and electrochemical-electrochemical have been developed to detect various biomarkers. Integrating the merits of nanomaterials with abundant active sites, synergy and excellent physicochemical properties, many bi-functional nanohybrids have been reasonable designed and controllable preparation, which applied to the construction dual mode biosensors. Despite the significant progress, further efforts are still needed to develop dual mode biosensors and ensure their practical application by using portable digital devices. Therefore, the present review summarizes an in-depth evaluation of the bi-functional nanohybrids assisted dual mode biosensing platform of biomarkers. We are hoping this review could inspire further concepts in developing novel dual mode biosensors for possible detection application.

An ultrasensitive electrochemical immunosensor for carcinoembryonic antigen detection based on two-dimensional PtPd/Cu-TCPP(Fe) nanocomposites

Establishing an effective signal amplification strategy is the key to achieving sensitive detection of analytes by electrochemical immunoassay. In this work, a novel sandwich-type electrochemical immunosensor with dual-signal amplification was successfully constructed using PtPd/Cu-TCPP(Fe) as the sensing platform and mesoporous silicon dioxide as the signal amplifier. Firstly, two-dimensional wrinkled Cu-TCPP(Fe) nanomaterials loaded with PtPd nanoparticles have strong affinity for the immobilization of capture antibodies and can generate excellent electrochemical signals. Meanwhile, the mesoporous silicon dioxide with large steric hindrance was used as signal label to further improve the sensitivity of the immunosensor by increasing the difference of the current response signal. Under optimal experimental conditions, the electrochemical immunosensor exhibited a wide linear detection range from 0.1 pg/mL to 1.0 μg/mL, with a detection limit as low as 0.166 fg/mL. The experimental results showed that the constructed immunosensor has a great application prospect in clinical biomarker detection.

Sandwich-type electrochemical immunosensing of hypopharyngeal carcinoma biomarker carcinoembryonic antigen based on N-doped hollow mesoporous nanocarbon spheres/gold hybrids as sensing platform and gold/ferrocene as signal amplifier

In the present work, a highly sensitive sandwich-type electrochemical immunosensor of carcinoembryonic antigen (CEA) was developed by preparing N-doped hollow mesoporous nanocarbon spheres/gold hybrids (NHMN/Au) hybridsas sensing platformand Au/ferrocene (Au/Fc) as signal amplifiers. The large surface area and high conductivity as well as good biocompatibility of NHMN/Au can increase the loading of primary antibody (Ab₁) and accelerate the electron transport rate of the electrode surface, while Au can carry immobilized secondary antibodies (Ab₂) and Fc derivative (Fc-SH).By using Fc-SH as response probe, the experiments show that the peak current of probe could increase after occurring the specific recognition of Ab₁-CEA-Ab₂, thus a novel sandwich-type immunosensor of CEA was developed. Finally, the proposed method for CEA detection was applied in human serum and the obtained results are satisfactory, indicating the developed method has important clinical applications for CEA determination.

Raspberry-Like Gold Nanoparticles Based On Nanoclusters Anchored on Cyclodextrin-Functionalized Nanoparticles: Synthesis and Ultrasensitive Electrochemical Detection of Chromium(VI) Ions

A facile synthetic strategy is devised to construct raspberry like gold nanoparticles (RbNPs) formed by gold nanoclusters wrapped around β-cyclodextrin functionalized gold nanoparticles (CD-AuNPs@AuNCs). An efficient and sensitive electrochemical sensor for the detection of Cr(VI) has been developed based on RbNPs. The sensing platform exhibits an excellent wide linear range (100 pg mL^-1 to 10 μg mL^-1 ), extremely low detection limit (40.91 fg mL^-1 i. e. 0.79 pM), which may pave a new way to fabricate other ultrasensitive electrochemical sensors based on the designed RbNPs.

Ultrasensitive sandwich-typed electrochemical immunoassay for detection of squamous cell carcinoma antigen based on highly branched PtCo nanocrystals and dendritic mesoporous SiO2@AuPt nanoparticles

Squamous cell carcinoma antigen (SCCA) is one of the common squamous cell carcinomas (SCC) in women, which usually works as a tumor biomarker for cervical cancer in diagnostic applications. Herein, bimetallic PtCo highly branched nanocrystals (PtCo BNCs) acted as electrode substrates to construct sandwich-typed electrochemical immunosensor for ultrasensitive detection of SCCA, by using dendritic mesoporous SiO₂@AuPt nanoparticles (DM-SiO₂@AuPt NPs) to adsorb electroactive thionine (Thi) as a signal label. The PtCo BNCs enlarged the loading of the primary antibody (Ab₁), showing effective improvement in conductivity and sensitivity. The DM-SiO₂ had abundant pores to incorporate more Thi, on which the decorated AuPt NPs created a great number of active sites to immobilize the secondary antibodies (Ab₂), thereby obviously amplifying the detection signals. The prepared sensor exhibited a broader linear range (0.001-120 ng mL^-1) and a lower detection limit (0.33 pg mL^-1, S/N = 3), combined with high reproducibility, a low relative standard deviation (below 2.5%) and acceptable recovery (from 98.5 to 110.0%) even in diluted human serum samples. This research provides a substantial platform for clinical diagnosis of SCCA in practice.

Impedimetric aptasensor based on zirconium-cobalt metal-organic framework for detection of carcinoembryonic antigen

A zirconium-cobalt metal-organic framework (ZrCo-MOF) was prepared and used as sensing material to fabricate an aptasensor for trace detection of carcinoembryonic antigen (CEA). The ZrCo-MOF integrates the 3D porous structure and abundant defects of the MOF framework, the catalytic activity and inherent redox behavior of Co, and high stability of Zr-MOF, providing abundant active sites to effectively anchor aptamers. As a result, the ZrCo-MOF-based aptasensor shows high sensitivity to detect CEA via specific recognition between aptamer and CEA, as well as the formation of aptamer-CEA complex. A detection limit of 0.35 fg·mL^-1 was deduced from the electrochemical impedance spectroscopy within a wide linear range of 0.001-100 pg·mL^-1 for CEA, which was substantially lower than those of most reported CEA biosensors. The ZrCo-MOF-based aptasensor also shows good selectivity, reproducibility, regenerability, stability, and applicability for human serum sample. Therefore, the developed ZrCo-MOF-based aptasensor will be promising for ultrasensitive detection of biomarkers and the early diagnosis of cancer. This work presents a novel electrochemical aptasensor for the trace detection of carcinoembryonic antigen (CEA) based on a zirconium-cobalt metal-organic framework (ZrCo-MOF), which shows low detection limit of 0.35 fg·mL^-1, high selectivity as well as good reproducibility, regenerability, stability, and applicability. The result provides a promising approach to detect the cancer biomarkers in an early age.

An ultrasensitive immunosensor based on cellulose nanofibrils/polydopamine/Cu-Ag nanocomposite for the detection of AFP

In this work, an ultrasensitive immunosensor for amperometric determination of alpha-fetoprotein (AFP) was developed utilizing Ag and Cu nanoparticles on polydopamine (PDA) functionalized cellulose nanofibrils (CNFs) composite (CNFs/PDA/Cu-Ag) as signal amplifier. PDA was first prepared by self-polymerizing of dopamine, and then was adsorbed on CNFs. The obtained CNFs/PDA was applied as substrate to electrolessly deposit Cu-Ag nanoparticles, using NaBH₄ as reducing agent. The structure and morphology of the synthesized CNFs/PDA/Cu-Ag nanocomposite were analyzed through Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, scanning electron microscopy, particle size analyzer and transmission electron microscopy. The CNFs/PDA/Cu-Ag modified glassy carbon electrode can fix AFP antibody (Ab), and further capture AFP specifically. Electrochemical impedance spectroscopy and cyclic voltammetry were used to characterize the assembly process of immunosensor. The immunoreaction was amplified by electrocatalytical reduction of H₂O₂ on Cu-Ag nanoparticles, through which AFP was quantitatively detected. The developed sensor exhibits wide linear range of 0.01-100 ng mL^-1 (R² = 0.9963) with low detection limit of 4.27 pg mL^-1 (S/N = 3). In addition, it has been used for the detection of AFP in human serum, manifesting its preeminent application prospect in early liver cancer diagnosis.

Heterometallic nanomaterials: activity modulation, sensing, imaging and therapy

Heterometallic nanomaterials (HMNMs) display superior physicochemical properties and stability to monometallic counterparts, accompanied by wider applications in the fields of catalysis, sensing, imaging, and therapy due to synergistic effects between multi-metals in HMNMs. So far, most reviews have mainly concentrated on introduction of their preparation approaches, morphology control and applications in catalysis, assay of heavy metal ions, and antimicrobial activity. Therefore, it is very important to summarize the latest investigations of activity modulation of HMNMs and their recent applications in sensing, imaging and therapy. Taking the above into consideration, we briefly underline appealing chemical/physical properties of HMNMs chiefly tailored through the sizes, shapes, compositions, structures and surface modification. Then, we particularly emphasize their widespread applications in sensing of targets (e.g. metal ions, small molecules, proteins, nucleic acids, and cancer cells), imaging (frequently involving photoluminescence, fluorescence, Raman, electrochemiluminescence, magnetic resonance, X-ray computed tomography, photoacoustic imaging, etc.), and therapy (e.g. radiotherapy, chemotherapy, photothermal therapy, photodynamic therapy, and chemodynamic therapy). Finally, we present an outlook on their forthcoming directions. This timely review would be of great significance for attracting researchers from different disciplines in developing novel HMNMs.

Functional nucleic acids in glycobiology: A versatile tool in the analysis of disease-related carbohydrates and glycoconjugates

As significant components of the organism, carbohydrates and glycoconjugates play indispensable roles in energy supply, cell signaling, immune modulation, and tumor cell invasion, and function as biomarkers since aberrance of them has been proved to be associated with the emergence and development of certain diseases. Functional nucleic acids (FNAs) have properties including easy-to-synthesize, good stability, good biocompatibility, low cost, and high programmability, they have attracted significant research attention and been incorporated into biosensors for detecting disease-related carbohydrates and glycoconjugates. This review summarizes the construction strategies and biosensing applications of FNAs-based biosensors in glycobiology in terms of target recognition and signal transduction. By illustrating the mechanisms and comparing the performances, the challenges and development opportunities in this area have been critically elaborated. We believe that this review will provide a better understanding of the role of FNAs in the analysis of disease-related carbohydrates and glycoconjugates, and inspire further discovery in fields that include glycobiology, chemical biology, clinical diagnosis, and drug development.

Application of CuS/Au Heterostructure with peroxidase-like activity in immunosensors

Early detection of tumour markers is essential for the timely treatment of cancer to realise the sensitive detection of Carcinoembryonic antigen (CEA). We chose electrochemical immunosensor as a simple analytical...

MoS2-based nanocomposites for cancer diagnosis and therapy

Molybdenum is a trace dietary element necessary for the survival of humans. Some molybdenum-bearing enzymes are involved in key metabolic activities in the human body (such as xanthine oxidase, aldehyde oxidase and sulfite oxidase). Many molybdenum-based compounds have been widely used in biomedical research. Especially, MoS2-nanomaterials have attracted more attention in cancer diagnosis and treatment recently because of their unique physical and chemical properties. MoS2 can adsorb various biomolecules and drug molecules via covalent or non-covalent interactions because it is easy to modify and possess a high specific surface area, improving its tumor targeting and colloidal stability, as well as accuracy and sensitivity for detecting specific biomarkers. At the same time, in the near-infrared (NIR) window, MoS2 has excellent optical absorption and prominent photothermal conversion efficiency, which can achieve NIR-based phototherapy and NIR-responsive controlled drug-release. Significantly, the modified MoS2-nanocomposite can specifically respond to the tumor microenvironment, leading to drug accumulation in the tumor site increased, reducing its side effects on non-cancerous tissues, and improved therapeutic effect. In this review, we introduced the latest developments of MoS2-nanocomposites in cancer diagnosis and therapy, mainly focusing on biosensors, bioimaging, chemotherapy, phototherapy, microwave hyperthermia, and combination therapy. Furthermore, we also discuss the current challenges and prospects of MoS2-nanocomposites in cancer treatment.

A sandwich-type photoelectrochemical aptasensor using Au/BiVO4 and CdS quantum dots for carcinoembryonic antigen assay

A novel sandwich-type photoelectrochemical (PEC) aptasensor for the carcinoembryonic antigen (CEA) assay was fabricated using the CEA aptamer, Au/BiVO₄ and CdS quantum dots (CdS QDs). In virtue of the localized surface plasmon resonance effect of Au nanoparticles, Au/BiVO₄ showed an effective utilization of visible light and excellent photoactivity, and was employed as the photoanode. After CdS QDs were conjugated to Au/BiVO₄ through the sandwich structure based on the hybridization of the CEA aptamer with two partially complementary single-stranded DNA molecules, the photocurrents were further enhanced by a resonance energy transfer between CdS QDs and Au nanoparticles. Meanwhile, the consumption of the photo-induced holes by ascorbic acid could also retard the combination of the electron-hole pairs and cause an increase of the photocurrents. However, the specific recognition of CEA by the CEA aptamer could destroy the sandwich structure and remarkably weaken the photocurrent response. Thus, the quantitative detection of CEA was connected with the decrease of the photocurrent. Benefitting from the above methods for signal enhancement, the PEC aptasensor showed a wide sensing range of 0.0001-10 ng mL^-1 and a low detection limit of 0.047 pg mL^-1 for CEA detection. The specificity, stability and recoveries of the PEC aptasensor were also excellent. Therefore, the construction of the present PEC aptasensor provides a universal and practical method for sensing other substances.

Porous Inorganic Materials for Bioanalysis and Diagnostic Applications

Porous inorganic materials play an important role in adsorbing targeted analytes and supporting efficient reactions in analytical science. The detection performance relies on the structural properties of porous materials, considering the tunable pore size, shape, connectivity, etc. Herein, we first clarify the enhancement mechanisms of porous materials for bioanalysis, concerning the detection sensitivity and selectivity. The diagnostic applications of porous material-assisted platforms by coupling with various analytical techniques, including electrochemical sensing, optical spectrometry, and mass spectrometry, etc., are then reviewed. We foresee that advanced porous materials will bring far-reaching implications in bioanalysis toward real-case applications, especially as diagnostic assays in clinical settings.

A multimer-based SERS aptasensor for highly sensitive and homogeneous assay of carcinoembryonic antigens

Carcinoembryonic antigens (CEAs) are known as one of the most common tumor markers. Their facile and affordable detection is critical for early diagnosis of malignant tumors, especially in resource-constrained settings. Here, we report a novel multimer-based surface-enhanced Raman scattering (SERS) aptasensor for a specific CEA assay. The aptasensor is fabricated through aptamer-assisted self-assembly of silver-coated gold nanoparticles (Au@Ag NPs), and the self-assembled multimeric structure possesses abundant hot-spots to provide high SERS response. When CEA is introduced, the specific recognition of CEA by aptamers will lead to the disassembly of Au@Ag multimers due to the lack of a bridging aptamer between Au@Ag NPs. As a result, the number of hot-spots in the multimeric system is decreased, and the intensity at 1585 cm-1 of the SERS reporter (4-mercaptobenzoic acid, 4-MBA) on the surface of NPs will also be decreased. The Raman intensity is proportional to the logarithm of the concentration of CEA. The detection sensitivity can be down to the pg mL-1 level. The analytical method only needs a droplet of 2 μL of sample, and the detection time is less than 20 min. The multimer-based SERS aptasensor can be applied in sensitive and inexpensive detection of CEA in serum samples.

The magnetic-nanoparticle-assisted sensitive detection of nitrated α-syn in blood based on a sensitizing electrochemical layer

Parkinson's disease (PD) is the second most prevalent neurodegenerative disease. Nitrated α-synuclein (α-syn) in the blood is a potentially efficient biomarker for PD in its early stages. In this work, an ultrasensitive electrochemical immunosensor was developed for the specific detection of nitrated α-syn. Supramolecule-mediated AuNP composites (GNCs) were modified on the gold electrode as a sensing film to capture anti-nitrated α-syn. Basic characterization studies revealed that GNCs were composed of abundant binding sites and had high conductivity with a large surface area, biocompatibility, and remarkable electrochemical activity. Anti-α-syn-modified magnetic nanoparticles (MNPs) were used as signal amplification tags to construct a sensitive sandwich assay. With a high specific surface area, strong conductivity, and abundant active sites, GNCs as an amplifying matrix can enhance the performance of the immunoassay and obtain preliminary signal amplification. MNPs showed excellent stability and led to a net decrease in the charge-transfer resistance due to their unique spherical structure and high conductivity, resulting in a sensitive electrochemical signal change according to the nitrated α-syn concentration in the sample. Therefore, this simple nitrated α-syn immunoassay with sensitivity and selectivity has potential for practical clinical applications.

Electrochemical biosensors for measurement of colorectal cancer biomarkers

Colorectal cancer (CRC) is associated with one of the highest rates of mortality among cancers worldwide. The early detection and management of CRC is imperative. Biomarkers play an important role in CRC screening tests, CRC treatment, and prognosis and clinical management; thus rapid and sensitive detection of biomarkers is helpful for early detection of CRC. In recent years, electrochemical biosensors for detecting CRC biomarkers have been widely investigated. In this review, different electrochemical detection methods for CRC biomarkers including immunosensors, aptasensors, and genosensors are summarized. Further, representative examples are provided that demonstrate the advantages of electrochemical sensors modified by various nanomaterials. Finally, the limitations and prospects of biomarkers and electrochemical sensors in detection are also discussed. Graphical abstract.

Recent advances in visual detection for cancer biomarkers and infectious pathogens

It is an urgency to detect infectious pathogens or cancer biomarkers using rapid, simple, convenient and cost-effective methods in complex biological samples. Many existing approaches (traditional virus culture, ELISA or PCR) for the pathogen and biomarker assays face several challenges in the clinical applications that require lengthy time, sophisticated sample pre-treatment and expensive instruments. Due to the simple and rapid detection manner as well as no requirement of expensive equipment, many visual detection methods have been considered to resolve the aforementioned problems. Meanwhile, various new materials and colorimetric/fluorescent methods have been tried to construct new biosensors for infectious pathogens and biomarkers. However, the recent progress of these aspects is rarely reviewed, especially in terms of integration of new materials, microdevice and detection mechanism into the visual detection systems. Herein, we provide a broad field of view to discuss the recent progress in the visual detection of infectious pathogens and cancer biomarkers along with the detection mechanism, new materials, novel detection methods, special targets as well as multi-functional microdevices and systems. The novel visual approaches for the infectious pathogens and biomarkers, such as bioluminescence resonance energy transfer (BRET), metal-induced metallization and clustered regularly interspaced short palindromic repeats (CRISPR)-based biosensors, are discussed. Additionally, recent advancements in visual assays utilizing various new materials for proteins, nucleic acids, viruses, exosomes and small molecules are comprehensively reviewed. Future perspectives on the visual sensing systems for infectious pathogens and cancers are also proposed.

A frogspawn-like Ag@C core–shell structure for an ultrasensitive label-free electrochemical immunosensing of carcinoembryonic antigen in blood plasma

Novel frogspawn-like Ag@C nanoparticles were successfully used to fabricate an ultrasensitive electrochemical immunosensing platform toward CEA in human blood samples.

Recent advances on TMDCs for medical diagnosis

Transition metal dichalcogenides (TMDCs), such as MoS₂ and WS₂, have attracted much attention in biosensing and bioimaging due to its excellent stability, biocompatibility, high specific surface area, and wide varieties. In this review, we overviewed the application of TMDCs in biosensing and bioimaging. Firstly, the synthesis methods and surface functionalization methods of TMDCs were summarized. Secondly, according to the working mechanism, we classified and gave a detailed account of the latest research progress of TMDC-based biosensing for the detection of the enzyme, DNA, and other biological molecules. Then, we outlined the recent progress of applying TMDCs in bio-imaging, including fluorescence, X-ray computed tomographic, magnetic response imaging, photographic and multimodal imaging, respectively. Finally, we discussed the future challenges and development direction of the application of TMDCs in medical diagnosis. Also, we put forward our view on the opportunity of TMDCs in the big data of modern medical diagnosis.

Dually enhanced homogenous synthesis of molybdophosphate by hybridization chain reaction and enzyme nanotags for the electrochemical bioassay of carcinoembryonic antigen

A magnetic bead (MB)-based sandwich biorecognition reactions is combined with a gold nanoprobe-induced homogenous synthesis of molybdophosphate to develop a novel bioassay method for the electrochemical detection of the tumor biomarker of carcinoembryonic antigen (CEA). The nanoprobe is prepared through the specific loading of numerous alkaline phosphatase (ALP)-functionalized gold nanoparticles (Au NPs) on a double-stranded DNA (dsDNA) produced by the CEA aptamer-triggered hybridization chain reaction (HCR). Both the large amounts of PO₄^3- produced by the ALP catalytic hydrolysis of pyrophosphate and the phosphate backbones of dsDNA can react with the added MoO₄^2- to generate electroactive molybdophosphates. So, the gold nanoprobe was used for signal tracing of the sandwich bioassay of CEA at a constructed antibody-functionalized MB platform. The sensitive electrochemical measurement of molybdophosphate produced from the quantitatively captured nanoprobes at a carbon nanotube-modified electrode (measured at about 0.12 V vs. Ag/AgCl, 3 M KCl) enabled the convenient signal transduction of the method. Due to the dually enhanced synthesis of molybdophosphate by the HCR and multi-enzyme Au NP nanotags, this method shows a wide linear range from 0.05 pg mL^-1 to 10 ng mL^-1 along with a low detection limit of 0.027 pg mL^-1. In addition, the MB-based biorecognition reaction and the homogeneous synthesis of molybdophosphate are much convenient in manipulations. These excellent performances decide the extensive application potentials of the method. Graphical abstract A magnetic bead-based bioassay method was simply developed for the electrochemical detection of carcinoembryonic antigen. The dually enhanced homogenous synthesis of molybdophosphate by hybridization chain reaction (HCR) and enzyme nanotags and the sensitive electrochemical measurement of molybdophosphate at a carbon nanotube (CNT)-electrode enable ultrasensitive signal transduction of the method.