Facile hydrothermal synthesis of Fe3O4@cellulose aerogel nanocomposite and its application in Fenton-like degradation of Rhodamine B

Facile Preparation of Magnetically Separable Fe3O4/ZnO Nanocomposite with Enhanced Photocatalytic Activity for Degradation of Rhodamine B

Magnetic separation of photocatalysts holds great promise for water treatment. A magnetic separation method has a positive effect on the recovery of catalysts after degradation. In this paper, an efficient and reusable catalytic system is developed based on coating magnetic Fe3O4 by depositing Fe2+ on the surface of ZnO. The Fe3O4/ZnO nanocomposite exhibits enhanced performance for organic pollutant degradation. The Fe3O4/ZnO system demonstrates a high photocatalytic activity of 100% degradation efficiency in Rhodamine B (RhB) degradation under UV light irradiation for 50 min. The excellent photocatalytic activity is primarily due to the separation of photogenerated electron-hole pairs being facilitated by the strong interaction between Fe3O4 and ZnO. The induction of the magnetic Fe3O4 endows the Fe3O4/ZnO composite with superior magnetic separation capability from water. Experiments with different radical scavengers revealed that the hydroxyl radical (·OH) is the key reactive radical for the effective degradation of RhB. This work innovatively affords a common interfacial dopant deposition strategy for catalytic application in the degradation of organic dye pollutants and catalyst separation from wastewater efficiently.

Wet peroxide oxidation process catalyzed by Cu/Al2O3: phenol degradation and Cu2+ dissolution behavior

Catalytic wet peroxide oxidation (CWPO) has become an important deep oxidation technology for organics removal in wastewater treatments. Supported Cu-based catalysts belong to an important type of CWPO catalyst. In this paper, two Cu catalysts, namely, Cu/Al2O3-air and Cu/Al2O3-H2 were prepared and evaluated through catalytic degradation of phenol. It was found that Cu/Al2O3-H2 had an excellent catalytic performance (TOC removal rate reaching 96%) and less metal dissolution than the Cu/Al2O3-air case. Moreover, when the organic removal rate was promoted at a higher temperature, the metal dissolution amounts was decreased. Combined with hydroxyl radical quenching experiments, a catalytic oxidation mechanism was proposed to explain the above-mentioned interesting behaviors of the Cu/Al2O3-H2 catalyst for CWPO. The catalytic test results as well as the proposed mechanism can provide better guide for design and synthesis of good CWPO catalysts.

Rapid removal of Rhodamine B by phosphoric acid-modified activated carbon derived from rape straw

A series of activated carbon was obtained from rape straw by chemical modification with phosphoric acid (H3PO4). The activated carbon was characterized and the adsorption capacity for Rhodamine B (RhB) from water was analysed. The SEM images showed that PRC-40 is a porous material and the BET analysis revealed a high surface area of 1720 m2/g with the coexistence of micropores and mesopores. The FTIR spectra determined the presence of oxygenated functional groups at its surface. The XPS spectra revealed that the content of carboxyl and metaphosphate groups in the modified activated carbon significantly increased, and this is conducive to the adsorption reaction. The XRD pattern showed the amorphous nature of carbon. The effect of significant parameters, such as the concentration of H3PO4 for modification and pH value, has been discussed. The kinetic data showed that the pseudo-second-order model is predominant. Besides, the Langmuir model was compatible well with the equilibrium data, and the maximum adsorption capacity of the activated carbon modified by H3PO4 was 2882.84 mg/g. Therefore, agricultural waste and rape straw can be used to prepare effective adsorbents for the application with the removal of dye from wastewater.

High capacity and selective adsorption of Congo red by cellulose-based aerogel with mesoporous structure: Adsorption properties and statistical data simulation

Large quantities of organic dyes are discharged into the environment, causing serious damage to the ecosystem. Therefore, it is urgent to develop inexpensive adsorbents to remove organic dyes. A novel cellulose-based aerogel (MPPA) with 3D porous structure was prepared by using cassava residue (cellulose) as basic construction blocks, doping ferroferric oxide (Fe3O4) for magnetic separation, and applying polyethyleneimine (PEI) as functional material for highly efficient and selective capture of Congo red (CR). MPPA exhibited porous network structure, numerous active capture sites, nontoxicity, high hydrophilicity, and excellent thermal stability. MPPA showed superior adsorption property for CR, with an equilibrium adsorption capacity of 2018.14 mg/g, and still had an adsorption property of 1189.31 mg/g after five recycling procedures. In addition, MPPA has excellent selectivity for CR in four binary dye systems. The adsorption behavior of MPPA on CR was further explored using a multilayer adsorption model, EDR-IDR hybrid model and AOAS model. Electrostatic potential and independent gradient models were used to further verify the possible interaction between MPPA and CR molecules. In conclusion, MPPA is a promising adsorbent in the field of treating anionic dyes.

Magnetite nanoparticles decorated on cellulose aerogel for p-nitrophenol Fenton degradation: Effects of the active phase loading, cross-linker agent and preparation method

Magnetite nanoparticles (Fe3O4 NPs) are among the most effective Fenton-Like heterogeneous catalysts for degrading environmental contaminants. However, Fe3O4 NPs aggregate easily and have poor dispersion stability because of their magnetic properties, which seriously decrease their catalytic efficiency. In this study, a novel environmentally friendly method for synthesising Fe3O4@CA was proposed. Fe3O4 NPs were immobilized on the 3D cellulose aerogels (CAs) in order to augment the degradation efficiency of p-nitrophenol (PNP) treatment and make the separation of the catalyst accessible by vacuum filtration method. Besides, CAs were fabricated from a cellulose source extracted from water hyacinth by using different cross-linking agents, such as kymene (KM) and polyvinyl alcohol-glutaraldehyde system (PVA-GA), and other drying methods, including vacuum thermal drying and freeze drying, were evaluated in the synthesis process. As-synthesized samples were analysed by various methods, including Powder X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray analysis and Brunauer-Emmett-Teller. Then, using ultraviolet-visible spectroscopy, the difference in the degradability of PNP of the obtained material samples was also investigated to determine their potential applications. Results highlighted that the Fe3O4-3@CA-KF catalyst with an Fe3O4 loading of 0.40 g/gCA used KM as a cross-linker and the freeze-drying method demonstrated the highest PNP removal efficiency (92.5 %) in all Fe3O4@CA samples with a H2O2 content of 5 g/L. The degradation kinetics and well-fitted pseudo-first-order model were investigated. Notably, after five successive PNP degradation experiments, this catalyst retained ∼80 % of the ability to degrade PNP, indicating its outstanding reusability. In environmental remediation, this study provides valuable insights into the development of simply separated and high-efficiency catalysts for heterogeneous catalytic reactions.

A post-sulfonated one-pot synthesized magnetic cellulose nanocomposite for Knoevenagel and Thorpe-Ziegler reactions

The development of biodegradable and active cellulosic-based heterogeneous catalysts for the synthesis of different organic compounds would be attractive in pharmaceutical and petrochemical-related industries. Herein, a post-sulfonated composite of one-pot synthesized magnetite (Fe3O4) and cellulose nanocrystals (CNCs) was used as an effective and easily separable heterogeneous catalyst for activating the Knoevenagel and Thorpe-Ziegler reactions. The composite was developed hydrothermally from microcrystalline cellulose (MCC), iron chlorides, urea, and hydrochloric acid at 180 °C for 20 h in a one-pot reaction. After collecting the magnetic CNCs (MCNCs), post-sulfonation was performed using chlorosulfonic acid (ClSO3H) in DMF at room temperature producing sulfonated MCNCs (SMCNCs). The results confirmed the presence of sulfonated Fe3O4 and CNCs with a hydrodynamic size of 391 nm (±25). The presence of cellulose was beneficial for preventing Fe3O4 oxidation or the formation of agglomerations without requiring the presence of capping agents, organic solvents, or an inert environment. The SMCNC catalyst was applied to activate the Knoevenagel condensation and the Thorpe-Ziegler reaction with determining the optimal reaction conditions. The presence of the SMCNC catalyst facilitated these transformations under green procedures, which enabled us to synthesize a new series of olefins and thienopyridines, and the yields of some isolated olefins and thienopyridines were up to 99% and 95%, respectively. Besides, the catalyst was stable for five cycles without a significant decrease in its reactivity, and the mechanistic routes of both reactions on the SMCNCs were postulated.

One-Step Synthesis of Ag2O/Fe3O4 Magnetic Photocatalyst for Efficient Organic Pollutant Removal via Wide-Spectral-Response Photocatalysis-Fenton Coupling

Photocatalysis holds great promise for addressing water pollution caused by organic dyes, and the development of Ag₂O/Fe₃O₄ aims to overcome the challenges of slow degradation efficiency and difficult recovery of photocatalysts. In this study, we present a novel, environmentally friendly Ag₂O/Fe₃O₄ magnetic nanocomposite synthesized via a simple coprecipitation method, which not only constructs a type II heterojunction but also successfully couples photocatalysis and Fenton reaction, enhancing the broad-spectrum response and efficiency. The Ag₂O/Fe₃O₄ (10%) nanocomposite demonstrates exceptional degradation performance toward organic dyes, achieving 99.5% degradation of 10 mg/L methyl orange (MO) within 15 min under visible light irradiation and proving its wide applicability by efficiently degrading various dyes while maintaining high stability over multiple testing cycles. Magnetic testing further highlighted the ease of Ag₂O/Fe₃O₄ (10%) recovery using magnetic force. This innovative approach offers a promising strategy for constructing high-performance photocatalytic systems for addressing water pollution caused by organic dyes.

One-pot synthesis of magnetic cellulose nanocrystal and its post-functionalization for doxycycline adsorption

The composite of magnetite (Fe₃O₄) and cellulose nanocrystal (CNC) is considered a potential adsorbent for water treatment and environmental remediation. In the current study, a one-pot hydrothermal procedure was utilized for magnetic cellulose nanocrystal (MCNC) development from microcrystalline cellulose (MCC) in the presence of ferric chloride, ferrous chloride, urea, and hydrochloric acid. The x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), and Fourier-transform infrared spectroscopy analysis confirmed the presence of CNC and Fe₃O₄, while transmission electron microscopy (TEM) and dynamic light scattering (DLS) analysis verified their respective sizes (< 400 nm and ≤ 20 nm) in the generated composite. To have an efficient adsorption activity for doxycycline hyclate (DOX), the produced MCNC was post-treated using chloroacetic acid (CAA), chlorosulfonic acid (CSA), or iodobenzene (IB). The introduction of carboxylate, sulfonate, and phenyl groups in the post-treatment was confirmed by FTIR and XPS analysis. Such post treatments decreased the crystallinity index and thermal stability of the samples but improved their DOX adsorption capacity. The adsorption analysis at different pHs revealed the increase in the adsorption capacity by reducing the basicity of the medium due to decreasing electrostatic repulsions and inducing strong attractions.

Emerging Trends in Nanotechnology: Aerogel-Based Materials for Biomedical Applications

At present, aerogel is one of the most interesting materials globally. The network of aerogel consists of pores with nanometer widths, which leads to a variety of functional properties and broad applications. Aerogel is categorized as inorganic, organic, carbon, and biopolymers, and can be modified by the addition of advanced materials and nanofillers. Herein, this review critically discusses the basic preparation of aerogel from the sol-gel reaction with derivation and modification of a standard method to produce various aerogels for diverse functionalities. In addition, the biocompatibility of various types of aerogels were elaborated. Then, biomedical applications of aerogel were focused on this review as a drug delivery carrier, wound healing agent, antioxidant, anti-toxicity, bone regenerative, cartilage tissue activities and in dental fields. The clinical status of aerogel in the biomedical sector is shown to be similarly far from adequate. Moreover, due to their remarkable properties, aerogels are found to be preferably used as tissue scaffolds and drug delivery systems. The advanced studies in areas including self-healing, additive manufacturing (AM) technology, toxicity, and fluorescent-based aerogel are crucially important and are further addressed.

A Novel P@SiO2 Nano-Composite as Effective Adsorbent to Remove Methylene Blue Dye from Aqueous Media

This work aims to prepare a novel phosphate-embedded silica nanoparticles (P@SiO₂) nanocomposite as an effective adsorbent through a hydrothermal route. Firstly, a mixed solution of sodium silicate and sodium phosphate was passed through a strong acidic resin to convert it into hydrogen form. After that, the resultant solution was hydrothermally treated to yield P@SiO₂ nanocomposite. Using kinetic studies, methylene blue (MB) dye was selected to study the removal behavior of the P@SiO₂ nanocomposite. The obtained composite was characterized using several advanced techniques. The experimental results showed rapid kinetic adsorption where the equilibrium was reached within 100 s, and the pseudo-second-order fitted well with experimental data. Moreover, according to Langmuir, one gram of P@SiO₂ nanocomposite can remove 76.92 mg of the methylene blue dye. The thermodynamic studies showed that the adsorption process was spontaneous, exothermic, and ordered at the solid/solution interface. Finally, the results indicated that the presence of NaCl did not impact the adsorption behavior of MB dye. Due to the significant efficiency and promising properties of the prepared P@SiO₂ nanocomposite, it could be used as an effective adsorbent material to remove various cationic forms of pollutants from aqueous solutions in future works.

Recent advances in biopolymer-based advanced oxidation processes for dye removal applications: A review

Over the past few years, synthetic dye-contaminated wastewater has attracted considerable global attention due to the low biodegradability and the ability of organic dyes to persist and remain toxic, causing numerous health and environmental concerns. As a result of the recalcitrant nature of those complex organic dyes, the remediation of wastewater using conventional wastewater treatment techniques is becoming increasingly challenging. In recent years, advanced oxidation processes (AOPs) have emerged as a potential alternative to treat organic dyestuffs discharged from industries. The most widely employed AOPs include photocatalysis, ozonation, Fenton oxidation, electrochemical oxidation, catalytic heterogeneous oxidation, and ultrasound irradiation. These processes involve the generation of highly reactive radicals to oxidize organic dyes into innocuous minerals. However, many conventional AOPs suffer from several setbacks, including the high cost, high consumption of reagents and substrates, self-agglomeration of catalysts, limited reusability, and the requirement of light, ultrasound, or electricity. Therefore, there has been significant interest in improving the performance of conventional AOPs using biopolymers and heterogeneous catalysts such as metal oxide nanoparticles (MONPs). Biopolymers have been widely considered in developing green, sustainable, eco-friendly, and low-cost AOP-based dye removal technologies. They inherit intriguing properties like biodegradability, renewability, nontoxicity, relative abundance, and sorption. In addition, the immobilization of catalysts on biopolymer supports has been proven to possess excellent catalytic activity and turnover numbers. The current review provides comprehensive coverage of different AOPs and how efficiently biopolymers, including cellulose, chitin, chitosan, alginate, gelatin, guar gum, keratin, silk fibroin, zein, albumin, lignin, and starch, have been integrated with heterogeneous AOPs in dye removal applications. This review also discusses the general degradation mechanisms of AOPs, applications of biopolymers in AOPs and the roles of biopolymers in AOPs-based dye removal processes. Furthermore, key challenges and future perspectives of biopolymer-based AOPs have also been highlighted.

Recyclable Mussel-Inspired Magnetic Nanocellulose@Polydopamine-Ag Nanocatalyst for Efficient Degradation of Refractory Organic Pollutants and Bacterial Disinfection

Development of a novel strategy to tackle bacterial-contaminated complex industrial wastewaters containing refractory organic pollutants is of great demand. In this study, polydopamine (PDA)-coated magnetic cellulose nanofiber (MCNF)-loaded silver nanoparticle (AgNP) (MCNF/PDA-Ag) nanocomposites were designed and applied for efficient degradation of organic dye pollutants and inactivation of Escherichia coli (E. coli) in wastewater. In the presence of NaBH₄, MCNF/PDA-Ag could achieve a high catalytic reduction rate of 6.54 min^-1 for the removal of methylene blue. Similarly, it showed good catalytic reduction performance for methyl orange (0.63 min^-1) and 4-nitrophenol (2.94 min^-1). The MCNF/PDA-Ag nanocomposites can be easily magnetically recycled and reused with negligible loss of catalytic performance. Moreover, this nanocatalyst also exhibited excellent disinfection performance against E. coli, with more than 99% disinfection ratio at very low doses (50 μg/mL). Overall, this work provides new insights into a delicate design of advanced magnetically recyclable silver nanocomposites with ultrahigh catalytic rates and excellent antibacterial properties from sustainable nature biomass.

Recent advances and future perspective on nanocellulose-based materials in diverse water treatment applications

Over the past few years, nanocellulose and its derivatives have drawn attention as promising bio-based materials for water treatment applications due to their high surface area, high strength, and renewable, biocompatible nature. The abundance of hydroxyl functional groups on the surfaces of cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) enables a broad range of surface modifications which results in propitious nanocomposites with tunable characteristics. In this context, this review describes the continuously developing applications of nanocellulose-based materials in the areas of adsorption, catalysis, filtration, and flocculation, with a special emphasis on the removal of contaminants such as heavy metals, dyes, and pharmaceutical compounds from diverse water systems. Recent progresses in the diverse forms of application of nanocellulose adsorbents (suspension, hydrogel, aerogel, and membrane) are also highlighted. Finally, challenges and future perspectives on emerging nanocellulose-based materials and their possible industrial applications are presented and discussed.

Lightweight and anisotropic cellulose nanofibril/rectorite composite sponges for efficient dye adsorption and selective separation

Constructing lightweight and porous adsorbents which can effectively remove dye contaminants is of great significance in the field of the sewage treatment. In this work, anisotropic cellulose nanofibril (CNF) composite sponges assisted by rectorites are fabricated through directional freeze-drying. The resulted composite sponge exhibits the superior saturated adsorption capacity and removal efficiency of 120.0 mg/g and 96.1% for methylene blue (MB), respectively, which is better than the pure CNF sponge and rectorite powders. This is attributed to the strong electrostatic interaction between CNFs and MB, and good cation exchange property of rectorites inside the three-dimensional (3D) highly porous composite sponge. The MB adsorption process of the composite sponge fits to the pseudo-second-order kinetic model and the Langmuir isotherm model well, which is affected by both boundary layer and intraparticle diffusion, resulting in a theoretical maximum adsorption capacity of 214.6 mg/g. Moreover, it also possesses a selective adsorption capacity for anionic and cationic dyes, which is expected to realize the separation treatment of different dyes according to actual application requirements.

Novel strategies for 2,8-dichlorodibenzo-p-dioxin degradation using ternary Au-modified iron doped TiO2 catalysts under UV-vis light illumination

Polychlorinated dibenzo-p-dioxins (PCDDs), characterized by their extreme toxicity, high persistency and bioaccumulation, regard as one of the most concerned environmental pollutants on the priority list. In this study, microwave-hydrothermal and photoreduction methods were adopted for fabrication of ternary Au@Fe/TiO₂ composites for removal of 2,8-dichlorodibenzo-p-dioxin (2,8-DCDD) under UV-Vis light irradiation. The acquired materials were characterized and analyzed by XRD, TEM, XPS, UV-Vis DRS, PL, etc. As a result, the 1%Au@1%Fe/TiO₂ exhibited much higher photocatalytic activity that 96.3% of 2,8-DCDD was removed within 160 min with respect to that of Fe/TiO₂ (3.0 times) and TiO₂ (5.5 times). It revealed the active substances might be produced, which were verified by ESR analysis. In a comparison, the 1%Au@1%Fe/TiO₂ also exhibited high activity in that 97.2% of 2,8-DCDD was removed within 240 min under an anoxic atmosphere. The 1%Au@1%Fe/TiO₂ systems were all pH-dependent that 2,8-DCDD could be fully degraded in neutral conditions. The results of repeatability on 1%Au@1%Fe/TiO₂ showed that the sample was high stability. Fe doping improved the charge separation of TiO₂ and Au modification improved the activity via SPR effect and Mott-Schottky barrier. The degradation mechanisms and pathways were proposed and discussed in detail. The current work develops a new approach on photocatalytic oxidation and reductive dechlorination of dioxins and may open a new opportunity to extend the application range of TiO₂ catalysts.

Hepatorenal protective effect of nano-curcumin against nano‑copper oxide-mediated toxicity in rats: Behavioral performance, antioxidant, anti-inflammatory, apoptosis, and histopathology

BACKGROUND

Metal oxide nanoparticles (NPs) induce oxidative stress that can cause cellular toxicity. A natural antioxidant that can be used to protect tissues from oxidative stress is curcumin.

PURPOSE

In the present study, we evaluated the protective effect of curcumin nanoparticles (curcumin-NPs) against copper oxide nanoparticles (CuO-NPs)-mediated hepatorenal effects on behavioral performance, biochemical markers, antioxidants, inflammation, apoptosis, and histopathology in rats.

STUDY DESIGN

Twenty Wistar adult male rats were randomly divided into four groups (n = 5); Group Ι served as a control, group ΙΙ was orally gavaged with curcumin-NPs (100 mg/Kg), group ΙΙI orally received CuO-NPs (100 mg/kg), and group ΙV received both CuO-NPs and curcumin-NPs orally for 14 days.

METHODS

Behavioral performance, biochemical markers, antioxidants, inflammatory mediators, and apoptotic gene expression were evaluated in addition to histopathological and immunohistochemical examination.

RESULTS

The results revealed that rats exposed to CuO-NPs suffered from behavioral alterations and hepatic and renal damages, which indicated by a marked elevation of serum biochemical parameters, including alanine aminotransferase, aspartate aminotransferase, alkaline phosphatase, lactate dehydrogenase, urea, uric acid, and creatinine and a decline of total protein. Moreover, there was a significant downregulation in the expression of antioxidants genes, whereas inflammatory mediators expression were upregulated. The histopathological and immunohistochemical examination also corroborated these findings. In contrast, rats co-treated with curcumin-NPs exhibited better behavioral performance, biochemical profile, gene expression, histological architecture, and immunohistochemical staining results.

CONCLUSION

These findings strongly indicated that curcumin-NPs exert significant protection against the behavioral and hepatorenal disorders induced by CuO-NPs toxicity by modulating oxidative stress regulators and gene expression.

Activation of Na2S2O8 by α-Fe2O3/CuS composite oxides for the degradation of Orange II under visible light irradiation

Layered α-Fe2O3/CuS nanoflowers with abundant active sites were synthesized by a hydrothermal method.

Fast preparation of Fe3O4@polydopamine/Au for highly efficient degradation of tetracycline

This work reported the fast synthesis of magnetic polydopamine Au-Fenton catalyst (Fe₃O₄@PDA/Au) under UV irradiation at 365 nm. The microstructure of prepared nanocomposites was characterized by various techniques. The effects of several key factors (pH values, H₂O₂ content and TC concentration) of tetracycline (TC) degradation were evaluated. The results revealed that the TC and total organic carbon (TOC) removal rate reached up to 98.16% and 93.14% within 300 min under optimal conditions (pH 3, H₂O₂ 80 μL, TC concentration 20 mg/L). Besides, HO radicals were generated during the Fenton-like degradation process and the plausible degradation mechanism was discussed. Moreover, Fe₃O₄@PDA/Au catalyst retained excellent catalytic capacity (TC removal rate 96.94% and TOC removal rate 87.69%) and exhibited fantastic stability after six cycles. Moreover, metal ions leaching was evaluated (0.023 mg/L). Altogether, the novel Fe₃O₄@PDA/Au Fenton-like catalyst is highly promising for wastewater management.

A one step synthesis of hybrid Fe/Ni-rGO using green tea extract for the removal of mixed contaminants

The use of biomass for the synthesis of value-added products, such as functional nanomaterial for the removal of contaminants, is a challenge. In this study, hybrid bimetallic Fe/Ni nanoparticles and reduced graphene supported bimetallic Fe/Ni nanoparticles (Fe/Ni-rGO) were prepared via a one-step green synthesis using green tea extract, and thereafter evaluated for the simultaneous removal of rifampicin (RIF) and Pb(II) from aqueous solution. The efficiencies of Pb(II) and RIF removal by Fe/Ni-rGO were 87.5 and 96.8%, respectively. The removal performance of the hybrid Fe/Ni-rGO was better than either nFe/Ni, rGO, or Fe-rGO. Detailed characterization and analyses of Fe/Ni-rGO indicated that both Fe and Ni nanoparticles were evenly distributed over the surface of rGO and that aggregation of Fe, Ni nanoparticles, and stacking of rGO in the hybrid were decreased. Furthermore, while LC-TOF-MS analysis showed that RIF was degraded into small-molecule fragments, XPS showed that Pb(II) was not reduced to Pb⁰. The major conditions impacting removal efficiency, adsorption kinetics, and fit to adsorption isotherm models were examined to better understand the removal mechanism. While the adsorption of both contaminants fit well a pseudo-second-order kinetic model, the adsorption of RIF fit the Freundlich isotherm model best, while the adsorption of Pb(II) fit the Langmuir isotherm model best. Thus, the removal mechanism of both contaminants firstly being chemical adsorbed onto the surface, while nFe/Ni continues to participate in the catalytic reduction of RIF. Moreover, Fe/Ni-rGO could be reused and performed well for wastewater treatment, thus suitable as a practical resource recycling technology.

Co-MOF-74 based Co3O4/cellulose derivative membrane as dual-functional catalyst for colorimetric detection and degradation of phenol

Smart nanomaterials that can simultaneously detect and eliminate contaminants in water environment are significant for health protection. To achieve such goal, Co-MOF-74 was in-situ assembled on regenerated cellulose membranes followed by calcination process, thus achieving dual-functional Co₃O₄/cellulose derivative membrane (Co₃O₄/CDM) catalyst. The Co₃O₄ morphology was readily controlled by further recrystallization of the deposited MOF precursor. Combining the high enrichment ability of cellulose membrane and outstanding peroxidase-active of Co₃O₄, the fast color reaction for phenol was accomplished within 10 min by Co₃O₄/CDM with the assistance of H₂O₂ and 4-aminoantipyrine (4-AAP). Moreover, the Co₃O₄/CDM also portrayed an excellent degradation property for phenol elimination via sulfate radical-advanced oxidation processes (SR-AOPs). The degradation efficiency of phenol reached 93% in 20 min, and the possible mineralization mechanism was proposed based on the XPS and LC-MS analysis. Thus, Co-MOF-74 derived Co₃O₄/CDM shows excellent properties in aiding the colorimetric detection and degradation of phenol in aqueous solutions.

Nanocellulose-Based Materials for Water Treatment: Adsorption, Photocatalytic Degradation, Disinfection, Antifouling, and Nanofiltration

Nanocelluloses are promising bio-nano-materials for use as water treatment materials in environmental protection and remediation. Over the past decades, they have been integrated via novel nanoengineering approaches for water treatment processes. This review aims at giving an overview of nanocellulose requirements concerning emerging nanotechnologies of waster treatments and purification, i.e., adsorption, absorption, flocculation, photocatalytic degradation, disinfection, antifouling, ultrafiltration, nanofiltration, and reverse osmosis. Firstly, the nanocellulose synthesis methods (mechanical, physical, chemical, and biological), unique properties (sizes, geometries, and surface chemistry) were presented and their use for capturing and removal of wastewater pollutants was explained. Secondly, different chemical modification approaches surface functionalization (with functional groups, polymers, and nanoparticles) for enhancing the surface chemistry of the nanocellulose for enabling the effective removal of specific pollutants (suspended particles, microorganisms, hazardous metals ions, organic dyes, drugs, pesticides fertilizers, and oils) were highlighted. Thirdly, new fabrication approaches (solution casting, thermal treatment, electrospinning, 3D printing) that integrated nanocelluloses (spherical nanoparticles, nanowhiskers, nanofibers) to produce water treatment materials (individual composite nanoparticles, hydrogels, aerogels, sponges, membranes, and nanopapers) were covered. Finally, the major challenges and future perspectives concerning the applications of nanocellulose based materials in water treatment and purification were highlighted.

Ionic chitosan/silica nanocomposite as efficient adsorbent for organic dyes

A new adsorbent from chitosan and anionic silica was prepared by ionic interaction followed by sol-gel process. The obtained nanocomposite was characterized by different techniques: FTIR, XRD, SEM/EDX, TGA, and TEM. The results showed that silica precursor interacts with chitosan and deposits as regular spherical nanoparticles. The methylene blue (MB) adsorption by chitosan/silica nanocomposite achieved the adsorption equilibrium within 60 min. The adsorption method is fitted to the pseudo-second-order kinetic model and the Langmuir adsorption model with a maximum adsorption capacity of 847.5 mg/g at slight alkaline solution. Chitosan/silica composite displayed high regeneration capability and recovery of MB up to five cycles without the loss of the adsorption efficiency. The current study showed that as-prepared chitosan/silica nanocomposite is an appropriate material for the adsorption of organic pollutants from wastewater.

Fe-based Fenton-like catalysts for water treatment: Preparation, characterization and modification

Fenton reaction based on hydroxyl radicals () is effective for environment remediation. Nevertheless, the conventional Fenton reaction has several disadvantages, such as working at acidic pH, producing iron-containing sludge, and the difficulty in catalysts reuse. Fenton-like reaction using solid catalysts rather than Fe²⁺ has received increasing attention. To date, Fe-based catalysts have received increasing attention due to their earth abundance, good biocompatibility, comparatively low toxicity and ready availability, it is necessary to review the current status of Fenton-like catalysts. In this review, the recent advances in Fe-based Fenton-like catalysts were systematically analyzed and summarized. Firstly, the various preparation methods were introduced, including template-free methods (precipitation, sol gel, impregnation, hydrothermal, thermal, and others) and template-based methods (hard-templating method and soft-templating method); then, the characterization techniques for Fe-based catalysts were summarized, such as X-ray diffraction (XRD), Brunauer, Emmett and Teller (BET), SEM (scanning electron microscopy)/TEM (transmission electron microscopy)/HRTEM (high-resolution TEM), FTIR (Fourier transform infrared spectroscopy)/Raman, XPS (X-ray photoelectron spectroscopy), ⁵⁷Fe Mössbauer spectroscopy etc.; thirdly, some important conventional Fe-based catalysts were introduced, including iron oxides and oxyhydroxides, zero-valent iron (ZVI) and iron disulfide and oxychloride; fourthly, the modification strategies of Fe-based catalysts were discussed, such as microstructure controlling, introduction of support materials, construction of core-shell structure and incorporation of new metal-containing component; Finally, concluding remarks were given and the future perspectives for further study were discussed. This review will provide important information to further advance the development and application of Fe-based catalysts for water treatment.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

Carboxylcellulose hydrogel confined-Fe3O4 nanoparticles catalyst for Fenton-like degradation of Rhodamine B

Facile preparation of functional hydrogel materials for environmental catalysis is a hot research topic of soft materials science and green catalysis. In this study, a carboxylcellulose hydrogel confined Fe₃O₄ nanoparticles composite catalyst (Fe₃O₄@CHC) with magnetic recyclability has been synthesized by taking the advantages of the newly developed cellulose solution in tetramethyl guanidine/DMSO/CO₂ through in situ acylation using mixed cyclic anhydrides and ion exchange reaction. The achieved Fe₃O₄@CHC hydrogel catalyst was shown to be an more efficient and better Fenton-like catalyst for decomposition of the organic dye rhodamine B (RhB) in the presence of hydrogen peroxide, with almost complete decomposition occurring within 180 min, in comparison with Fe₃O₄@cellulose hydrogel (CH) with excellent recyclability. This work provided a facile strategy for the preparation of hydrogel-based functional composite green catalytic materials, which has potential applications in green catalysis.

Recent progress in preparation and applications of chitosan/calcium phosphate composite materials

Studying the development of unique materials from sustainable and renewable resources has gained increasing concern due to the depletion of fossil resources. Chitosan and its derivatives have been considered as versatile candidates for preparing attractive materials. The fabrication of chitosan/calcium phosphate composite compounds has received much attention for the development of numerous promising products in different fields. In this short review, recent preparation strategies for chitosan/calcium phosphate composites such as freeze casting, vacuum-assisted filtration, and biomimetic mineralization were discussed. The review presented their advances for diverse applications such as bone tissue engineering implants, drug delivery, wound healing, dental caries, as well adsorption of organic and heavy metals from polluted water. The challenges and future perspectives for the application of chitosan/calcium phosphate materials in biomedical and environmental applications were also involved in this review article.

Degradation of textile dyes from aqueous solution using tea-polyphenol/Fe loaded waste silk fabrics as Fenton-like catalysts

In this study, waste silk fabrics (SF) were modified with tea-polyphenols (TPs) and then iron (Fe²⁺). The modified silk fabrics (TP-SF/Fe) were characterized via Fourier-transform infrared (FTIR), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analysis. TP-SF/Fe was used in the Fenton-like removal of dyes (methylene blue, reactive orange GRN, and cationic violet X-5BLN) from aqueous solutions with catalyst-like activity. The effects of different catalyst samples, contact time, H₂O₂ concentration, initial dye concentration, and pH values on dye removal were investigated. The results showed that the dye removal percentages with the TP-SF/Fe-H₂O₂ sample reached 98%, 97%, and 95% in 5–40 min for methylene blue, reactive orange GRN, and cationic violet X-5BLN, respectively. Different thermodynamic and kinetic models were used to check the best fit of the adsorption data. The results indicated that the Freundlich isotherm and pseudo first-order kinetics models were the best fits. Moreover, it was also proved that TP-SF/Fe would be quite an effective and economical adsorbent for the treatment of textile dye wastewater. This work provides the basis for waste silk application in the removal of dyes from wastewater.

In this study, waste silk fabrics were modified with tea-polyphenols then loaded with Fe²⁺ for degradation of dyes.

Magnetic aerogel: an advanced material of high importance

Magnetic materials have brought innovations in the field of advanced materials. Their incorporation in aerogels has certainly broadened their application area. Magnetic aerogels can be used for various purposes from adsorbents to developing electromagnetic interference shielding and microwave absorbing materials, high-level diagnostic tools, therapeutic systems, and so on. Considering the final use and cost, these can be fabricated from a variety of materials using different approaches. To date, several studies have been published reporting the fabrication and uses of magnetic aerogels. However, to our knowledge, there is no review that specifically focuses only on magnetic aerogels, so we attempted to overview the main developments in this field and ended our study with the conclusion that magnetic aerogels are one of the emerging and futuristic advanced materials with the potential to offer multiple applications of high value.

Fe3O4@C Nanoparticles Synthesized by In Situ Solid-Phase Method for Removal of Methylene Blue

Fe3O4@C nanoparticles were prepared by an in situ, solid-phase reaction, without any precursor, using FeSO4, FeS2, and PVP K30 as raw materials. The nanoparticles were utilized to decolorize high concentrations methylene blue (MB). The results indicated that the maximum adsorption capacity of the Fe3O4@C nanoparticles was 18.52 mg/g, and that the adsorption process was exothermic. Additionally, by employing H2O2 as the initiator of a Fenton-like reaction, the removal efficiency of 100 mg/L MB reached ~99% with Fe3O4@C nanoparticles, while that of MB was only ~34% using pure Fe3O4 nanoparticles. The mechanism of H2O2 activated on the Fe3O4@C nanoparticles and the possible degradation pathways of MB are discussed. The Fe3O4@C nanoparticles retained high catalytic activity after five usage cycles. This work describes a facile method for producing Fe3O4@C nanoparticles with excellent catalytic reactivity, and therefore, represents a promising approach for the industrial production of Fe3O4@C nanoparticles for the treatment of high concentrations of dyes in wastewater.

Sustainable Advanced Fenton-like Catalysts Based on Mussel-Inspired Magnetic Cellulose Nanocomposites to Effectively Remove Organic Dyes and Antibiotics

The development of biocompatible advanced Fenton-like catalysts with high catalytic activity, good stability, and recyclability using sustainable biosourced materials is of considerable interest yet remains a challenge. Herein, we develop a novel mussel-inspired magnetic cellulose nanocomposite (MCNF/PDA) with carboxylated cellulose nanofibers (CNF) and explore as advanced Fenton-like catalysts to effectively degrade organic dyes and antibiotics. The MCNF/PDA nanocomposites were prepared by anchoring Fe₃O₄ nanoparticles to CNFs via chemical deposition followed with PDA coatings. The composites exhibit an excellent degradation activity toward methylene blue (MB) in a wide pH range of 2-10 in the presence of H₂O₂ and have a maximum degradation capacity of 2265 mg/g. Moreover, the MCNF/PDA nanocatalysts are highly stable and can be easily regenerated. After four cycles, it can still achieve the removal rate as high as 95%. In addition, the MCNF/PDA nanocatalysts also demonstrate an excellent degradation performance to the antibiotic tetracycline. This work provides new insights into fabricating biocompatible cellulosic-based advanced Fenton catalysts with sustainable biomass-derived materials to efficiently remove organic pollutants from wastewater.

Kinetic Studies on the Catalytic Degradation of Rhodamine B by Hydrogen Peroxide: Effect of Surfactant Coated and Non-Coated Iron (III) Oxide Nanoparticles

Iron (III) oxide (Fe₃O₄) and sodium dodecyl sulfate (SDS) coated iron (III) oxide (SDS@Fe₃O₄) nanoparticles (NPs) were synthesized by the co-precipitation method for application in the catalytic degradation of Rhodamine B (RB) dye. The synthesized NPs were characterized using X-ray diffractometer (XRD), vibrating sample magnetometer (VSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infra-red (FT-IR) spectroscopy techniques and tested in the removal of RB. A kinetic study on RB degradation by hydrogen peroxide (H₂O₂) was carried out and the influence of Fe₃O₄ and SDS@Fe₃O₄ magnetic NPs on the degradation rate was assessed. The activity of magnetic NPs, viz. Fe₃O₄ and SDS@Fe₃O₄, in the degradation of RB was spectrophotometrically studied and found effective in the removal of RB dye from water. The rate of RB degradation was found linearly dependent upon H₂O₂ concentration and within 5.0 × 10^-2 to 4.0 × 10^-1 M H₂O₂, the observed pseudo-first-order kinetic rates (k_obs, s^-1) for the degradation of RB (10 mg L^-1) at pH 3 and temperature 25 ± 2 °C were between 0.4 and 1.7 × 10⁴ s^-1, while in presence of 0.1% w/v Fe₃O₄ or SDS@Fe₃O₄ NPs, k_obs were between 1.3 and 2.8 × 10⁴ s^-1 and between 2.6 and 4.8 × 10⁴ s^-1, respectively. Furthermore, in presence of Fe₃O₄ or SDS@Fe₃O₄, k_obs increased with NPs dosage and showed a peaked pH behavior with a maximum at pH 3. The magnitude of thermodynamic parameters E_a and ΔH for RB degradation in presence of SDS@Fe₃O₄ were 15.63 kJ mol^-1 and 13.01 kJ mol^-1, respectively, lowest among the used catalysts, confirming its effectiveness during degradation. Furthermore, SDS in the presence of Fe₃O₄ NPs and H₂O₂ remarkably enhanced the rate of RB degradation.