Metal-organic solids derived from arylphosphonic acids

Cu12-cluster-based metal-organic framework as a metastable intermediate in the formation of a layered copper phosphonate

The solvothermal reaction of CuSO4·5H2O and a chiral R-pempH2 ligand (molar ratio 6 : 1) first forms the metastable intermediate [Cu24(OH)20(R-pempH)8(SO4)10(H2O)10.5]·35H2O (1), followed by the formation of the stable phase [Cu2(OH)(R-pempH)(SO4)(H2O)]·H2O (2). Compound 1 displays a novel 3D open-framework structure containing Cu12 cluster nodes and sulfate links, which can be converted to the layered compound 2. We also investigated the photothermal effects of both compounds.

Enhanced Charge Transfer Process and Photocatalytic Activity over a Phosphonate-based MOF via Amorphization Strategy

Recently, amorphous materials have gained great attention as an emerging kind of functional material, and their characteristics such as isotropy, absence of grain boundaries, and abundant defects are very likely to outrun the disadvantages of crystalline counterparts, such as low conductivity, and ultimately lead to improved charge transfer efficiency. Herein, we investigated the effect of amorphization on the charge transfer process and photocatalytic performance with a phosphonate-based metal-organic framework (FePPA) as the research object. Comprehensive experimental results suggest that compared to crystalline FePPA, amorphous FePPA has more distorted metal nodes, which affects the electron distribution and consequently improves the photogenerated charge separation efficiency. Meanwhile, the distorted metal nodes in amorphous FePPA also greatly promote the adsorption and activation of O2. Hence, amorphous FePPA exhibits a better performance of photocatalytic C(sp3)-H bond activation for selective oxidation of toluene to benzaldehyde. This work illustrates the advantages of amorphous MOFs in the charge transfer process, which is conducive to the further development of high performance MOFs-based photocatalysts.

Synthesis and Characterization of Two Novel Naphthalenediimide/Zinc Phosphonate Crystalline Materials Precipitated from Different Solvents

Hybrid naphthalenediimide/zinc phosphonate materials (NDI/Zn) were prepared by mixing solutions of N,N'-bis(2-phosphonoethyl)-1,4,5,8-naphthalenediimide (PNDI) and zinc nitrate, resulting in the precipitation of the desired compounds. Samples precipitated from water and N,N-dimethylformamide (DMF) were produced. The obtained samples had the expected elemental composition, and the presence of naphthalenediimides (NDI) was ascertained by infrared and UV-visible spectroscopy. All the samples were crystalline, according to powder X-ray diffraction. Nitrogen adsorption isotherms showed the presence of porosity in the NDI/Zn samples. Mesopores with a diameter = 4.1 nm were present in the sample from DMF, with total pore volume reaching 0.13 cm3/g.

Exceptionally Stable And Super-Efficient Electrocatalysts Derived From Semiconducting Metal Phosphonate Frameworks

Two new isostructural semiconducting metal-phosphonate frameworks are reported. Co2 [1,4-NDPA] and Zn2 [1,4-NDPA] (1,4-NDPA4- is 1,4-naphthalenediphosphonate) have optical bandgaps of 1.7 eV and 2.5 eV, respectively. The electrocatalyst derived from Co2 [1,4-NPDA] as a precatalyst generated a low overpotential of 374 mV in the oxygen evolution reaction (OER) with a Tafel slope of 43 mV dec-1 at a current density of 10 mA cm-2 in alkaline electrolyte (1 mol L-1 KOH), which is indicative of remarkably superior reaction kinetics. Benchmarking of the OER of Co2 [1,4-NPDA] material as a precatalyst coupled with nickel foam (NF) showed exceptional long-term stability at a current density of 50 mA cm-2 for water splitting compared to the state-of-the-art Pt/C/RuO2 @NF after 30 h in 1 mol L-1 KOH. In order to further understand the OER mechanism, the transformation of Co2 [1,4-NPDA] into its electrocatalytically active species was investigated.

Metal-organic frameworks as photocatalysts in energetic and environmental applications

Metal-organic frameworks (MOFs) are an exciting new class of porous materials with great potential for photocatalytic applications in the environmental and energy sectors. MOFs provide significant advantages over more traditional materials when used as photocatalysts due to their high surface area, adaptable topologies, and functional ability. In this article, we summarize current developments in the use of MOFs as photocatalysts for a variety of applications, such as CO2 reduction, water splitting, pollutant degradation, and hydrogen production. We discuss the fundamental properties of MOFs that make them ideal for photocatalytic applications, as well as strategies for improving their performance. The opportunities and challenges presented by this rapidly expanding field are also highlighted.

Creating Order in Ultrastable Phosphonate Metal-Organic Frameworks via Isolable Hydrogen-Bonded Intermediates

The stability presented by trivalent metal-organic frameworks (MOFs) makes them an attractive class of materials. With phosphonate-based ligands, crystallization is a challenge, as there are significantly more binding motifs that can be adopted due to the extra oxygen tether compared to carboxylate counterparts and the self-assembly processes are less reversible. Despite this, we have reported charge-assisted hydrogen-bonded metal-organic frameworks (HMOFs) consisting of [Cr(H2O)6]3+ and phosphonate ligands, which were crystallographically characterized. We sought to use these HMOFs as a crystalline intermediate to synthesize ordered Cr(III)-phosphonate MOFs. This can be done by dehydrating the HMOF to remove the aquo ligands around the Cr(III) center, forcing metal-phosphonate coordination. Herein, a new porous HMOF, H-CALF-50, is synthesized and then dehydrated to yield the MOF CALF-50. CALF-50 is ordered, although it is not single crystalline. It does, however, have exceptional stability, maintaining crystallinity and surface area after boiling in water for 3 weeks and soaking in 14.5 M H3PO4 for 24 h and 9 M HCl for 72 h. Computational methods are used to study the HMOF to MOF transformation and give insight into the nature of the structure and the degree of heterogeneity.

Mechanochemical Phosphorylation of Acetylides Using Condensed Phosphates: A Sustainable Route to Alkynyl Phosphonates

In pursuit of a more sustainable route to phosphorus-carbon (P-C) bond-containing chemicals, we herein report that phosphonates can be prepared by mechanochemical phosphorylation of acetylides using polyphosphates in a single step, redox-neutral process, bypassing white phosphorus (P4) and other high-energy, environmentally hazardous intermediates. Using sodium triphosphate (Na5P3O10) and acetylides, alkynyl phosphonates 1 can be isolated in yields of up to 32%, while reaction of sodium pyrophosphate (Na4P2O7) and sodium carbide (Na2C2) engendered, in an optimized yield of 63%, ethynyl phosphonate 2, an easily isolable compound that can be readily converted to useful organophosphorus chemicals. Highly condensed phosphates like Graham's salt and bioproduced polyphosphate were also found to be compatible after reducing the chain length by grinding with orthophosphate. These results demonstrate the possibility of accessing organophosphorus chemicals directly from condensed phosphates and may offer an opportunity to move toward a "greener" phosphorus industry.

Crystalline versus Amorphous: High-Performance Hafnium Phosphonate Framework for the Separation of Uranium and Transuranium Elements

Metal phosphonate frameworks (MPFs) consisting of tetravalent metal ions and aryl-phosphonate ligands feature a large affinity for actinides and excellent stabilities in harsh aqueous environments. However, it remains elusive how the crystallinity of MPFs influences their performance in actinide separation. To this end, we prepared a new category of porous, ultrastable MPF with different crystallinities for uranyl and transuranium separation. The results demonstrated that crystalline MPF was generally a better adsorbent for uranyl than the amorphous counterpart and ranked as the top-performing one for uranyl and plutonium in strong acidic solutions. A plausible uranyl sequestration mechanism was unveiled by using powder X-ray diffraction in tandem with vibrational spectroscopy, thermogravimetry, and elemental analysis.

Microporous Metal-Phosphonates with a Novel Orthogonalized Linker and Complementary Guests: Insights for Trivalent Metal Complexes from Divalent Metal Complexes

The reliable self-assembly of microporous metal-phosphonate materials remains a longstanding challenge. This stems from, generally, more coordination modes for the functional group allowing more dense structures, and stronger bonding driving less crystalline products. Here, a novel orthogonalized aryl-phosphonate linker, 1,3,5-tris(4'-phosphono-2',6'-dimethylphenyl) benzene (H₆ L3) has been used to direct formation of open frameworks. The peripheral aryl rings of H₆ L3 are orthogonalized relative to the central aromatic ring giving a tri-cleft conformation of the linker in which small aromatic molecules can readily associate. When coordinated to magnesium ions, a series of porous crystalline metal-organic, and hydrogen-bonded metal-organic frameworks (MOFs, HMOFs) are formed (CALF-41 (Mg), HCALF-42 (Mg), -43 (Mg)). While most metal-organic frameworks are tailored based on choice of metal and linker, here, the network structures are highly dependent on the inclusion and structure of the guest aromatic compounds. Larger guests, and a higher stoichiometry of metal, result in increased solvation of the metal ion, resulting in networks with connectivities increasingly involving hydrogen-bonds rather than direct phosphonate coordination. Upon thermal activation and aromatic template removal, the materials exhibit surface areas ranging from 400-600 m² /g. Self-assembly in the absence of aromatic guests yields mixtures of phases, frequently co-producing a dense 3-fold interpenetrated structure (1). Interestingly, a series of both more porous (530-900 m² /g), and more robust solids is formed by complexing with trivalent metal ions (Al, Ga, In) with aromatic guest; however, these are only attainable as microcrystalline powders. The polyprotic nature of phosphonate linkers enables structural analogy to the divalent analogues and these are identified as CALF-41 analogues. Finally, insights to the structural transformations during metal ion desolvation in this family are gained by considering a pair of structurally related Co materials, whose hydrogen-bonded (HCALF-44 (Co)) and desolvated (CALF-44 (Co)) coordination bonded networks were fully structurally characterized.

Two Stable Cd-MOFs as Dual-Functional Materials with Luminescent Sensing of Antibiotics and Proton Conduction

Construction and investigation of dual-functional metal-organic frameworks (MOFs) with luminescent sensing and proton conduction provide widespread applications in clean energy and environmental monitoring fields. By selecting a phosphonic acid ligand 4-pyridyl-CH₂N(CH₂PO₃H₂)₂ (H₄L) and coligand 2,2'-biimidazole (H₂biim), two cadmium-based MOFs [Cd_1.5(HL)(H₂biim)_0.5] (1) and (H₄biim)_0.5·[Cd₂(L)(H₂biim)Cl] (2) with different structures and properties have been hydrothermally synthesized by controlling reaction temperature. Based on the excellent thermal and chemical stabilities, and good luminescent stabilities in water solution, 1 and 2 can serve as luminescent sensors of chloramphenicol (CAP) with different quenching constant (K_SV) values and detection limits (LODs) in water, simulated environmental system, and real fish water system. Meanwhile, different sensing effects and possible sensing mechanisms are analyzed in detail. Moreover, 1 and 2 can also serve as good proton-conducting materials. The proton conductivities can reach up to 1.41 × 10^-4 S cm^-1 for 1 and 1.02 × 10^-3 S cm^-1 for 2 at 368 K and 95% relative humidity (RH). Among them, 2 shows better luminescent sensing and proton conduction performance than 1, which indicates that different crystal structures have a great impact on the properties of MOFs. Through the discussion of the relationship between structures and properties in detail, the possible reasons for the differences in properties are obtained, which can provide theoretical guidance for the rational design of this kind of dual-functional MOFs in the future.

Tuning Structural and Optical Properties of Porphyrin-based Hydrogen-Bonded Organic Frameworks by Metal Insertion

Herein, a simple way of tuning the optical and structural properties of porphyrin-based hydrogen-bonded organic frameworks (HOFs) is reported. By inserting transition metal ions into the porphyrin cores of GTUB-5 (p-H₈ -TPPA (5,10,15,20-Tetrakis[p-phenylphosphonic acid] HOF), the authors show that it is possible to generate HOFs with different band gaps, photoluminescence (PL) life times, and textural properties. The band gaps of the resulting HOFs (viz., Cu-, Ni-, Pd-, and Zn-GTUB-5) are measured by diffuse reflectance and PL spectroscopy, as well as calculated via DFT, and the PL lifetimes are measured. Across the series, the band gaps vary over a narrow range from 1.37 to 1.62 eV, while the PL lifetimes vary over a wide range from 2.3 to 83 ns. These differences ultimately arise from metal-induced structural changes, viz., changes in the metal-to-nitrogen distances, number of hydrogen bonds, and pore volumes. DFT reveals that the band gaps of Cu-, Zn-, and Pd- GTUB-5 are governed by highest occupied/lowest unoccupied crystal orbitals (HOCO/LUCO) composed of π- orbitals on the porphyrin linkers, while that of Ni-GTUB-5 is governed by a HOCO and LUCO composed of Ni dorbitals. Overall, our findings show that metal-insertion can be used to optimize HOFs for optoelectronics and small-molecule capture applications.

Layered Uranyl Phosphonates Encapsulating Co(II)/Mn(II)/Zn(II) Ions: Exfoliation into Nanosheets and Its Impact on Magnetic and Luminescent Properties

Layered heterometallic 5f-3d uranyl phosphonates can exhibit unique luminescent and/or magnetic properties, but the fabrication and properties of their 2D counterparts have not been investigated. Herein we report three heterobimetallic uranyl phosphonates, namely, [(UO₂ )₃ M(2-pmbH)₄ (H₂ O)₄ ] ⋅ 2H₂ O [MU, M=Co(II), CoU; Mn(II), MnU; Zn(II), ZnU; 2-pmbH₃ =2-(phosphonomethyl)benzoic acid]. They are isostructural and display two-dimensional layered structures where the M(II) centers are encapsulated inside the windows generated by the diamagnetic uranyl phosphonate layer. Each M(II) has an octahedral geometry filled with four water molecules in the equatorial positions and two phosphonate oxygen atoms in the axial positions. The uranium atoms adopt UO₇ pentagonal bipyramidal and UO₆ square bipyramidal geometries. The lattice and coordination water molecules can be released by thermal treatment and reabsorbed in a reversible manner, accompanied with changes of magnetic dynamics. Interestingly, the bulk samples of MU can be exfoliated in acetone via freezing and thawing processes forming nanosheets with single-layer or two-layer thickness (MU-ns). Magnetic studies revealed that the CoU and MnU systems exhibited field-induced slow magnetization relaxation at low temperature. Compared with crystalline CoU, the magnetic relaxation of the CoU-ns aggregates is significantly accelerated. Moreover, photoluminescence measured at 77 K showed slight red-shift of the five characteristic uranyl emission bands for ZnU-ns in comparison with those of the crystalline ZnU. This work gives the first examples of 2D materials based on 5f-3d heterometallic uranyl phosphonates and illustrates the impact of dimension reduction on their magnetic/optical properties.

Synthesis and crystal structure of bis[trans-diaqua(1,4,8,11-tetraazacyclotetradecane-κ4 N 1,N 4,N 8,N 11)nickel(II)] trans-(1,4,8,11-tetraazacyclotetradecane-κ4 N 1,N 4,N 8,N 11)bis[4,4′,4′′-(1,3,5-trimethylbenzene-2,4,6-triyl)tris(hydrogen phenylphosphonato-κO)]nickel(II) decahydrate

The components of the title compound, [Ni(C10H24N4)(H2O)2]2[Ni(C10H24N4)(C27H24O9P3)2]·10H2O are two centrosymmetric [Ni(C10H24N4)(H2O)2]2+ dications, a centrosymmetric [Ni(C10H24N4)(C27H24O9P3)2]4− tetra-anion and five crystallographically unique water molecules of crystallization. All of the nickel ions are coordinated by the four secondary N atoms of the macrocyclic cyclam ligands, which adopt the most energetically stable trans-III conformation, and the mutually trans O atoms of either water molecules in the cations or the phosphonate groups in the anion in a tetragonally distorted NiN4O2 octahedral coordination geometry. Strong O—H...O hydrogen bonds between the protonated and the non-protonated phosphonate O atoms of neighboring anions result in the formation of layers oriented parallel to the bc plane, which are linked into a three-dimensional network by virtue of numerous N—H...O and O—H...O hydrogen bonds arising from the sec-NH groups of the macrocycles, phosphonate O atoms and coordinated and non-coordinated water molecules.

Uranyl phosphonates: crystalline materials and nanosheets for temperature sensing

Ultrathin nanosheets of luminescent metal-organic frameworks or coordination polymers have been widely used for sensing ions, solvents and biomolecules but, as far as we are aware, not yet used for temperature sensing. Herein we report two luminescent uranyl phosphonates based on 2-(phosphonomethyl)benzoic acid (2-pmbH₃), namely (UO₂)(2-pmbH₂)₂ (1) and (H₃O)[(UO₂)₂(2-pmb)(2-pmbH)] (2). The former has a supramolecular layer structure, composed of chains of corner-sharing {UO₆} octahedra and {PO₃C} tetrahedra which are connected by hydrogen bonds between phosphonate and carboxylic groups. Compound 2 possesses a unique 2D anionic framework structure, where the inorganic uranyl phosphonate chains made up of {UO₇} and {PO₃C} polyhedra are cross-linked by 2-pmb^3- ligands. The carboxylic groups of 2-pmbH^2- ligands are pendant on the two sides of the layers and form hydrogen bonds between the layers. Both compounds can be exfoliated in acetone via a top-down freeze-thaw method, resulting in nanosheets of two-layer thickness. Interestingly, the photoluminescence (PL) of 1 and 2 is highly temperature sensitive. Variable temperature PL studies revealed that compounds 1 and 2 can be used as thermometers in the temperature ranges 120-300 K and 100-280 K, respectively. By doping the nanosheets into polymer matrix, 1-ns@PMMA and 2-ns@PMMA were prepared. The PL intensity of 1-ns@PMMA is insensitive to temperature, unlike that of the bulk sample. While 2-ns@PMMA exhibits similar temperature-dependent luminescence behaviour to its bulk counterpart, thereby enabling its potential application as a thermometer in the temperature range 100-280 K.

Coordination-induced band gap reduction in a metal-organic framework

Herein, we report on the synthesis of a microporous, three‐dimensional phosphonate metal–organic framework (MOF) with the composition Cu₃(H₅‐MTPPA)₂ ⋅ 2 NMP (H₈‐MTPPA=methane tetra‐p‐phenylphosphonic acid and NMP=N‐methyl‐2‐pyrrolidone). This MOF, termed TUB1, has a unique one‐dimensional inorganic building unit composed of square planar and distorted trigonal bipyramidal copper atoms. It possesses a (calculated) BET surface area of 766.2 m²/g after removal of the solvents from the voids. The Tauc plot for TUB1 yields indirect and direct band gaps of 2.4 eV and 2.7 eV, respectively. DFT calculations reveal the existence of two spin‐dependent gaps of 2.60 eV and 0.48 eV for the alpha and beta spins, respectively, with the lowest unoccupied crystal orbital for both gaps predominantly residing on the square planar copper atoms. The projected density of states suggests that the presence of the square planar copper atoms reduces the overall band gap of TUB1, as the beta‐gap for the trigonal bipyramidal copper atoms is 3.72 eV.

Layer or Tube? Uncovering Key Factors Determining the Rolling-up of Layered Coordination Polymers

Nanotubular materials have garnered considerable attention since the discovery of carbon nanotubes. Although the layer-to-tube rolling up mechanism has been well recognized in explaining the formation of many inorganic nanotubes, it has not been generally applied to coordination polymers (CPs). To uncover the key factors that determine the rolling-up of layered CPs, we have chosen the Co/R-, S-Xpemp [Xpemp = (4-X-1-phenylethylamino)methylphosphonic acid, X = H, F, Cl, Br] systems and study how the weak interactions influence the formation of layered or tubular structures. Four pairs of homochiral isostructural compounds R-, S-Co(Xpemp)(H₂O)₂ [X = H (1H), F (2F), Cl (3Cl), Br (4Br)] were obtained with tubular structures. The inclusion of 3,3'-azobipyridine (ABP) guest molecules led to compounds R-, S-[Co(Xpemp)(H₂O)₂]₄·ABP·H₂O with layered structures when X was Cl (5Cl) and Br (6Br), but tubular compounds 1H and 2F when X was H and F. Layered structures were also obtained for racemic compounds meso-Co(Xpemp)(H₂O)₂ [X = F (7F), Cl (8Cl), Br (9Br)] using racemic XpempH₂ as the reaction precursor, but not when X = H. A detailed study on R-6Br revealed that layer-to-tube transformation occurred upon removal of ABP under hydrothermal conditions, forming R-4Br with a tubular structure. Similar layer-to-tube conversion did not occur in organic solvents. The results demonstrate that weak interlayer interactions are a prerequisite but not sufficient for the rolling-up of the layers. In the present cases, water also provides a driving force in the layer-to-tube transformation. The experimental results were rationalized by theoretical calculations.

New isoreticular phosphonate MOFs based on a tetratopic linker

The tetratopic linker 1,1,2,2-tetrakis(4-phosphonophenyl)ethylene (H₈TPPE) was used to synthesize the three new porous metal-organic frameworks of composition [M₂(H₂O)₂(H₂TPPE)]·xH₂O (M = Al³⁺, Ga³⁺, Fe³⁺), denoted as M-CAU-53 under hydrothermal reaction conditions, using the corresponding metal nitrates as starting materials. The crystal structures of the compounds were determined ab initio from powder X-ray diffraction data, revealing small structural differences. Proton conductivity measurements were carried out, indicating different conductivity mechanisms. The differences in proton conductivity could be linked to the individual structures. In addition, a thorough characterization via thermogravimetry, elemental analysis, IR-spectroscopy as well as N₂- and H₂O-sorption is given.

Arylphosphonate-Tethered Porphyrins: Fluorescence Silencing Speaks a Metal Language in Living Enterocytes*

We report the application of a highly versatile and engineerable novel sensor platform to monitor biologically significant and toxic metal ions in live human Caco-2 enterocytes. The extended conjugation between the fluorescent porphyrin core and metal ions through aromatic phenylphosphonic acid tethers generates a unique turn off and turn on fluorescence and, in addition, shifts in absorption and emission spectra for zinc, cobalt, cadmium and mercury. The reported fluorescent probes p-H8 TPPA and m-H8 TPPA can monitor a wide range of metal ion concentrations via fluorescence titration and also via fluorescence decay curves. Cu- and Zn-induced turn off fluorescence can be differentially reversed by the addition of common chelators. Both p-H8 TPPA and m-H8 TPPA readily pass the mammalian cellular membrane due to their amphipathic character as confirmed by confocal microscopic imaging of living enterocytes.

Cobalt(II)-dianthracene Frameworks: Assembly, Exfoliation and Properties

Metal-organic frameworks containing responsive organic linkers are attractive for potential applications in sensors and molecular devices. Herein we report three cobalt(II) phosphonates incorporating responsive dianthracene linkers, namely, Co₂ (amp₂ H₂ )₂ (H₂ O)₄  ⋅ 6H₂ O (MDAF-1), Co₂ (amp₂ )(H₂ O)₄  ⋅ 2H₂ O (MDAF-2) and Co(amp₂ H₂ ) ⋅ 2H₂ O ⋅ 0.5DMF (MDAF-3), where amp₂ H₄ is pre-photodimerized 9-anthrylmethylphosphonic acid. MDAF-1 shows a layer structure in which dinuclear Co₂ (PO₃ H)₂ units are inter-connected by dianthracene ligands. In MDAF-2 and MDAF-3, inorganic chains of corner-sharing {CoO₄ } (or {CoO₆ }) and {PO₃ C} are cross-linked by dianthracene ligands into 3D frameworks. All compounds underwent thermo-induced phase transitions, first the de-solvation and then the de-dimerization of dianthracene (as well as the release of the remaining solvent molecules for MDAF-2 and -3), associated with magnetic changes. MDAF-1 can be exfoliated into single-layer nanosheets in water which show light-triggered luminescent changes.

Multimetal lanthanide phosphonocarboxylate frameworks: structures, colour tuning and near-infrared emission

A series of isostructural lanthanide phosphonocarboxylate frameworks {(H3O)3[Ln7(pbpdc)6(DMF)4(H2O)3]·4H2O}n (named LnPCF, Ln = Tb, Eu and Gd, H4pbpdc = 4'-phosphono-[1,1'-biphenyl]-3,5-dicarboxylic acid) were solvothermally synthesized and characterized by the single crystal X-ray diffraction technique. By combining lanthanide cations with a phosphonocarboxylate ligand, a heptametallic lanthanide phosphonate [Ln7(PO3)6(COO)12] core was obtained. This core exhibited as a rare highly 18-connected node and was linked by the 3-connected pbpdc4- ligand, forming a (3,18)-connected framework with a novel topology of {43}6{438·676·839}. This LnPCF structure is an ideal platform for accommodating various lanthanide ions. The TbPCF and EuPCF show efficient luminescence emission due to the "antenna effect" and incorporating Gd3+ into the TbPCF results in a drastic luminescence enhancement. Fine colour tuning between green and red can be easily achieved in bimetallic TbxGd1-xPCFs. More significantly, upon combining a few percent of Nd3+ and Gd3+ with Tb3+, the resulting trimetallic Tb0.4Gd0.5Nd0.1PCF shows dual emissions of both visible and near-infrared light.

1D and 2D hybrid polymers based on zinc phenylphosphates: synthesis, characterization and applications in electroactive materials

The synthesis, structure and properties of three hybrid polymers based on zinc arylphosphates are described in this study. Zinc bis(diphenylphosphate) (ZnDPhP) was obtained as needle-like crystals containing hexagonally packed, homochiral 1 ∞[Zn(DPhP)2/2] helical chains. The XRD and DSC studies revealed that upon heating, ZnDPhP undergoes a reversible thermal transition at ca. 160 °C with expansion mainly perpendicular to its c-axis. Zinc phenylphosphate hydrate (ZnMPhP-H) formed plate-like particles with an average thickness of less than 1 μm and much thinner nanolayers with a basal spacing of 15.5 Å. ZnMPhP-H was easily and reversibly dehydrated to its anhydrous form, ZnMPhP-A, which exhibited a somewhat larger basal spacing of 16.5 Å and the capacity for amine intercalation. The thermal decomposition of ZnDPhP or ZnMPhP-A began around 250 °C, resulting in the formation of solid mixtures of zinc phosphates and electron-conducting carbonaceous phases. The bulk electrical conductivities of the poly(vinylidene fluoride)-based composites containing the ZnDPhP pyrolyzates reached 0.1-0.2 S cm-1. Upon mixing with silicone oil, all the synthesized hybrid polymers formed fluids that exhibit significant negative electrorheological effects and have potential for application in electroresponsive smart materials. The application of an electric field during the crosslinking of such systems affected the viscoelastic properties of the resultant solid composites, while the cured systems showed rather small electrorheological effects.

Porphyrin and phthalocyanine-based metal organic frameworks beyond metal-carboxylates

Given the ubiquitous role of porphyrins in natural systems, these molecules and related derivatives such as phthalocyanines are fascinating building units to achieve functional porous materials. Porphyrin-based MOFs have been developed over the past three decades, yet chemically robust frameworks, necessary for applications, have been achieved much more recently and this field is expanding. This progress is partially driven by the development of porphyrins and phthalocyanines bearing alternative coordinating groups (phosphonate, azolates, phenolates…) that allowed moving the related MOFs beyond metal-carboxylates and achieving new topologies and properties. In this perspective article we first give a brief outline of the synthetic pathways towards simple porphyrins and phthalocyanines bearing these complexing groups. The related MOF compounds are then described; their structural and textural properties are discussed, as well as their stability and physical properties. An overview of the resulting nets and topologies is proposed, showing both the similarities with metal-carboxylate phases and the peculiarities related to the alternative coordinating groups. Eventually, the opportunities offered by this recent research topic, in terms of both synthesis pathways and modulation of pore size and shape, stability and physical properties, are discussed.

Water-assisted proton conductivity of two lanthanide-based supramolecules

At 98% RH and 100 °C, the best σ values of 0.87 × 10⁻⁴ S cm⁻¹ for 1 and 1.58 × 10⁻⁴ S cm⁻¹ for 2 were observed, which remained essentially constant during 8 hours of continuous measurement.

A Nanotubular Metal-Organic Framework with a Narrow Bandgap from Extended Conjugation*

A one-dimensional nanotubular metal-organic framework (MOF) [Ni(Cu-H4 TPPA)]⋅2 (CH3 )2 NH2 + (H8 TPPA=5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin) constructed by using the arylphosphonic acid H8 TPPA is reported. The structure of this MOF, known as GTUB-4, was solved by using single-crystal X-ray diffraction and its geometric accessible surface area was calculated to be 1102 m2  g-1 , making it the phosphonate MOF with the highest reported surface area. Due to the extended conjugation of its porphyrin core, GTUB-4 possesses narrow indirect and direct bandgaps (1.9 eV and 2.16 eV, respectively) in the semiconductor regime. Thermogravimetric analysis suggests that GTUB-4 is thermally stable up to 400 °C. Owing to its high surface area, low bandgap, and high thermal stability, GTUB-4 could find applications as electrodes in supercapacitors.

Crystal structure of poly[triaqua-(di(2,2′-bipyridine-κ2 N,N′)-μ4-silanetetrayltetrakis(benzene-4,1-diyl)tetrakis (hydrogen phosphonato)-κ4 O:O′:O′′:O′′′) dicadmium(II)], C44H42N4O15P4Cd2Si

C44H42N4O15P4Cd2Si, triclinic, P1̄ (no. 2), a = 13.4778(9) Å, b = 14.2036(9) Å, c = 15.2206(10) Å, α = 69.637(1)°, β = 72.355(1)°, γ = 64.861(1)°, V = 2431.1(3) Å3, Z = 2, R gt(F) = 0.0428, wR ref(F 2) = 0.0987, T = 120(2) K.

Crystal structure of 4,4′-bipyridin-1,1′-dium poly[bis(μ4-benzene-1,3,5-triyltris(hydrogen phosphonato-κ4 O:O′:O′′:O′′′))zinc(II)], C11H11NO9P3Zn

C11H11NO9P3Zn, monoclinic, P21/n (no. 14), a = 12.619(2) Å, b = 8.4948(12) Å, c = 13.954(2) Å, β = 90.588(3)°, V = 1495.7(4) Å3, Z = 4, R gt(F) = 0.0413, wR ref(F 2) = 0.0965, T = 120(2) K.

A Tetratopic Phosphonic Acid for the Synthesis of Permanently Porous MOFs: Reactor Size-Dependent Product Formation and Crystal Structure Elucidation via Three-Dimensional Electron Diffraction

Following the strategy of installing porosity in coordination polymers predefined by linker geometry, we employed the new tetratopic linker molecule 1,1,2,2-tetrakis[4-phosphonophenyl]ethylene (H₈TPPE) for the synthesis of new porous metal phosphonates. A high-throughput study was carried out using Ni²⁺ and Co²⁺ as metal ions, and a very strong influence of the reactor size on the product formation is observed while maintaining the same reaction parameters. Using small autoclaves (V = 250 μL), single crystals of isostructural mononuclear complexes of the composition [Ni(H₃DPBP)₂(H₂O)₄] (1) and [Co(H₃DPBP)₂(H₂O)₄] (2) are formed. They contain the linker molecule H₄DPBP (4,4'-diphosphonobenzophenone), which is formed in situ by oxidation of H₈TPPE. Using autoclaves with a volume of V = 2 mL, two new 3D metal-organic frameworks (MOFs) of composition [Ni₂(H₄TPPE)(H₂O)₆]·4H₂O (CAU-46) and [Co₂(H₄TPPE)(H₂O)₄]·3H₂O (CAU-47) were isolated in bulk quantities, and their crystal structures were determined from three-dimensional electron diffraction (3D ED) and powder X-ray diffraction data. Using even larger autoclaves (V = 30 mL), another 3D MOF of the composition [Co₂(H₄TPPE)]·6H₂O (Co-CAU-48) was obtained, and a structure model was established via 3D ED measurements. Remarkably, the isostructural compound [Ni₂(H₄TPPE)]·9H₂O (Ni-CAU-48) is only obtained indirectly, i.e., via thermal activation of CAU-46. As the chosen linker geometry leads to the formation of MOFs, topological analyses were carried out, highlighting the different connectivities observed in the three frameworks. Porosity of the compounds was proven via water sorption experiments, resulting in uptakes of 126 mg/g (CAU-46), 105 mg/g (CAU-47), 210 mg/g (Ni-CAU-48), and 109 mg/g (Co-CAU-48).

Fluorescent Arylphosphonic Acids: Synergic Interactions between Bone and the Fluorescent Core

Herein, we report the third generation of fluorescent probes (arylphosphonic acids) to target calcifications, particularly hydroxyapatite (HAP). In this study, we use highly conjugated porphyrin-based arylphosphonic acids and their diesters, namely 5,10,15,20-tetrakis[m-(diethoxyphosphoryl)phenyl]porphyrin (m-H8 TPPA-OEt8 ) and 5,10,15,20-tetrakis [m-phenylphosphonic acid]porphyrin (m-H8 TPPA), in comparison with their positional isomers 5,10,15,20-tetrakis[p-(diisopropoxyphosphoryl)phenyl]porphyrin (p-H8 TPPA-iPr8 ) and 5,10,15,20-tetrakis [p-phenylphosphonic acid]porphyrin (p-H8 TPPA), which have phosphonic acid units bonded to sp2 carbon atoms of the fluorescent core. The conjugation of the fluorescent core is thus extended to the (HAP) through sp2 -bonded -PO3 H2 units, which generates increased fluorescence upon HAP binding. The resulting fluorescent probes are highly sensitive towards the HAP in rat bone sections. The designed probes are readily taken up by cells. Due to the lower reported toxicity of (p-H8 TPPA), these probes could find applications in monitoring bone resorption or adsorption, or imaging vascular or soft tissue calcifications for breast cancer diagnosis etc.

New insights into the radiolytic stability of metal(iv) phosphonate hybrid adsorbent materials

Stable metal(iv) phosphonate hybrids are a promising class of materials for the critical issue of nuclear waste cleanup. However, to be of practical use, adsorbent materials must demonstrate radiolytic stability and this property remains poorly understood. Therefore, the radiolytic stabilities of post-functionalised mesoporous zirconium titanate and zirconium phosphonate coordination polymers were compared. For the first time, solid-state ³¹P MAS-NMR was used to probe the radiolytic degradation of metal(iv) phosphonates and provide mechanistic insight. Polyphosphonate-functionalized hybrids were more stable than monophosphonate hybrids, as the monophosphonate readily detached from the oxide surface. The zirconium phosphonate coordination polymer (Zr-ATMP) demonstrated the greatest radiolytic stability, attributed to its high ligand loading and intimately mixed structure. Zr-ATMP maintained highly efficient sorption from strongly acidic solutions even after receiving doses of gamma radiation up to 2.9 MGy.

Semiconductive microporous hydrogen-bonded organophosphonic acid frameworks

Herein, we report a semiconductive, proton-conductive, microporous hydrogen-bonded organic framework (HOF) derived from phenylphosphonic acid and 5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin (GTUB5). The structure of GTUB5 was characterized using single crystal X-ray diffraction. A narrow band gap of 1.56 eV was extracted from a UV-Vis spectrum of pure GTUB5 crystals, in excellent agreement with the 1.65 eV band gap obtained from DFT calculations. The same band gap was also measured for GTUB5 in DMSO. The proton conductivity of GTUB5 was measured to be 3.00 × 10-6 S cm-1 at 75 °C and 75% relative humidity. The surface area was estimated to be 422 m2 g-1 from grand canonical Monte Carlo simulations. XRD showed that GTUB5 is thermally stable under relative humidities of up to 90% at 90 °C. These findings pave the way for a new family of organic, microporous, and semiconducting materials with high surface areas and high thermal stabilities.

Phosphonate Metal-Organic Frameworks: A Novel Family of Semiconductors

Herein, the first semiconducting and magnetic phosphonate metal-organic framework (MOF), TUB75, is reported, which contains a 1D inorganic building unit composed of a zigzag chain of corner-sharing copper dimers. The solid-state UV-vis spectrum of TUB75 reveals the existence of a narrow bandgap of 1.4 eV, which agrees well with the density functional theory (DFT)-calculated bandgap of 1.77 eV. Single-crystal conductivity measurements for different orientations of the individual crystals yield a range of conductances from 10^-3 to 10³ S m^-1 at room temperature, pointing to the directional nature of the electrical conductivity in TUB75. Magnetization measurements show that TUB75 is composed of antiferromagnetically coupled copper dimer chains. Due to their rich structural chemistry and exceptionally high thermal/chemical stabilities, phosphonate MOFs like TUB75 may open new vistas in engineerable electrodes for supercapacitors.

Polar layered coordination polymers incorporating triazacyclononane-triphosphonate metalloligands

Reactions of metalloligands M^III(notpH₃) (M = Fe, Co and notpH₆ = 1,4,7-triazacyclononane-1,4,7-triyl-tris(methylenephosphonic acid)) with Zn(OAc)₂ under hydrothermal conditions resulted in new metal phosphonates Zn₂Fe(notp)Cl(H₂O) (1) and ZnCo(notpH)(H₂O)·2H₂O (2). They crystallize in polar space groups P6₃ (for 1) and Pca2₁ (for 2), respectively, and exhibit layer structures in which the inorganic layers are separated by the organic groups of the notp ligands. However, the layer topologies of the two compounds are quite different. In 1, the layer contains 6-membered rings composed of one {FeN₃O₃} octahedron, one {Zn1O₃Cl}, one {Zn2O₄} and three {PO₃C} tetrahedra via corner-sharing connections, while in 2, the layer contains 10-membered rings composed of two {CoO₃N₃} octahedra, three {ZnO₄} and five {PO₃C} tetrahedra via vertex-sharing connections. Dielectric measurements on single crystals of 2 confirmed the presence of high dielectric anisotropy. Proton conductivity measurements revealed that the proton conduction is more favourable in 2 due to the presence of a continuous hydrogen bond network in this compound.

Permanent porosity and role of sulfonate groups in coordination networks constructed from a new polyfunctional phosphonato-sulfonate linker molecule

The new linker molecule (H2O3PCH2)2N-CH2C6H4SO3H, (4-{[bis(phosphonomethyl)amino]methyl}benzene-sulfonic acid, H5L), bearing both phosphonic and sulfonic acid groups, was employed for the synthesis of new coordination polymers (CPs). Four new CPs of composition [Mg(H3L)(H2O)2]·H2O (1), [Mg2(HL)(H2O)6]·2H2O (2), [Ba(H3L)(H2O)]·H2O (3) and [Pb2(HL)]·H2O (4), were discovered using high-throughput methods and all structures were determined by single-crystal X-ray diffraction (SCXRD). With increasing ionic radius of the metal ion, an increase in coordination number from CN = 6 (Mg2+) to CN = 9 (Ba2+) and an increase in the dimensionality of the network from 1D to 3D is observed. This is reflected in the composition of the IBU and the number of metal ions that are connected by each linker molecule, i.e. from three in 1 to ten in 4. The connection of the IBUs leads to 1D and 2D structures in 1 and 2 with non-coordinating sulfonate groups, while 3 and 4 crystallise in MOF-type structures and coordination of the sulfonate groups is observed. The compounds exhibit thermal stabilities between 200 (2) and 345 °C (4) as proven by variable temperature powder X-ray diffraction (VT-PXRD) measurements. Title compound 4 contains micropores of 4 × 2 Å and reversible H2O uptake of 50 mg g-1 was demonstrated by vapour sorption measurements, making it the first porous metal phosphonatosulfonate. Detailed characterisation, i.e. CHNS and TG analysis as well as NMR and IR spectroscopy measurements confirm the phase purity of the title compounds.

A dual-functional metal phosphate for high proton conduction and selective luminescence turn-on sensing of Co2+ ions

The {[Zn(H₂PIPZ)](H₂O)}_n (compound 1) detects Co²⁺ ions with turn on fluorescent and proton conductivity of composite membrane 1@PVA10 is ten times higher than compound 1 at 98% RH and 353 K.

Investigating the effect of positional isomerism on the assembly of zirconium phosphonates based on tritopic linkers

Combination of the novel linker 2,4,6-tris[3-(phosphonomethyl)phenyl]-1,3,5-triazine and Zr(iv) afforded a layered compound that lacks extended inorganic connectivity and displays good proton conductivity.