Lanthanides and actinides: Annual survey of their organometallic chemistry covering the year 2017

Mechanochemistry for Organic and Inorganic Synthesis

In recent years, mechanochemistry has become an innovative and sustainable alternative to traditional solvent-based synthesis. Mechanochemistry rapidly expanded across a wide range of chemistry fields, including diverse organic compounds and active pharmaceutical ingredients, coordination compounds, organometallic complexes, main group frameworks, and technologically relevant materials. This Review aims to highlight recent advancements and accomplishments in mechanochemistry, underscoring its potential as a viable and eco-friendly alternative to conventional solution-based methods in the field of synthetic chemistry.

Organolanthanide Single-Molecule Magnets with Heterocyclic Ligands

Lanthanide (Ln) based mononuclear single-molecule magnets (SMMs) provide probably the finest ligand regulation model for magnetic property. Recently, the development of such SMMs has witnessed a fast transition from coordination to organometallic complexes because the latter provides a fertile, yet not fully excavated soil for the development of SMMs. Especially those SMMs with heterocyclic ligands have shown the potential to reach higher blocking temperature. In this minireview, we give an overview of the design principle of SMMs and highlight those "shining stars" of heterocyclic organolanthanide SMMs based on the ring sizes of ligands, analysing how the electronic structures of those ligands and the stiffness of subsequently formed molecules affect the dynamic magnetism of SMMs. Finally, we envisaged the future development of heterocyclic Ln-SMMs.

Bis(phosphinophenyl)amido-Ligated Binuclear Rare-Earth Metal Complexes for Highly cis-1,4-Selective Polymerization of 1,3-Conjugated Dienes

A series of binuclear rare-earth metal complexes based on the ligands containing bis(phosphinophenyl)amido-PNP unit are successfully synthesized. All the ligands and the corresponding binuclear complexes are fully characterized by NMR spectra (1H, 13C, and 31P). In conjunction with [Ph3C][B(C6F5)4], all the binuclear complexes exhibited high catalytic activity and high cis-1,4-selectivity (>99%) toward the polymerization of 1,3-conjugated dienes (isoprene, β-myrcene and β-farnesene) with excellent livingness at room temperature or even 80 °C.

The Tishchenko reaction mediated by organo-f-complexes: the myths and obstacles

For over a century, the Tishchenko reaction has been a valuable technique for synthesizing esters from aldehydes, serving a variety of applications in different domains. Beyond the remarkable advances in organoactinide and organolanthanide chemistry over the past two decades, there has been a significant increase in the research of the electrophilic d0/fn chemistry of organoactinide and organolanthanide compounds due to the captivating interplay between their structure and reactivity, and their exceptional performance in various homogeneous catalytic processes. The remarkable influence of ligand design, both in terms of steric hindrance and electronic properties, on the catalytic activity of organo-f-element complexes in organic transformations is well-established. However, the traditional view was that the significant oxophilicity of actinide and lanthanide complexes makes them unfavorable for reactions involving oxygen because of catalytic poisoning and their applications have been relatively limited, primarily focused on hydroalkoxylation, small-molecule activation, and cyclic ester polymerization. This review dissects the intricate interplay between ligand design and catalytic activity in actinide and lanthanide complexes, specifically in the context of the Tishchenko esterification.

Alpha-metalated N,N-dimethylbenzylamine rare-earth metal complexes and their catalytic applications

This perspective summarizes our group's extensive research in the realm of organometallic lanthanide complexes, while also placing the catalytic reactions supported by these species within the context of known lanthanide catalysis worldwide, with a specific focus on phosphorus-based catalytic reactions such as intermolecular hydrophosphination and hydrophosphinylation. α-Metalated N,N-dimethylbenzylamine ligands have been utilized to generate homoleptic lanthanide complexes, which have subsequently proven to be highly active lanthanum-based catalysts. The main goal of our research program has been to enhance the catalytic efficiency of lanthanum-based complexes, which began with initial successes in the stoichiometric synthesis of organometallic lanthanide complexes and utilization of these species in catalytic hydrophosphination reactions. Not only have these species supported traditional lanthanide catalysis, such as the hydrophosphination of heterocumulenes like carbodiimides, isocyanates, and isothiocyanates, but they have also been effective for a plethora of catalytic reactions tested thus far, including the hydrophosphinylation and hydrophosphorylation of nitriles, hydrophosphination and hydrophosphinylation of alkynes and alkenes, and the heterodehydrocoupling of silanes and amines. Each of these catalytic transformations is meritorious in its own right, offering new synthetic routes to generate organic scaffolds with enhanced functionality while concurrently minimizing both waste generation and energy consumption. Objectives: We aim for the research summary presented herein to inspire and encourage other researchers to investigate f-element based stoichiometric and catalytic reactions. Our efforts in this field began with the recognition that potassium salts of benzyldimethylamine preferred deprotonation at the α-position, rather than the ortho-position, and we wondered if this regiochemistry would be retained in the formation of lanthanide complexes. The pursuit of this simple idea led first to a series of structurally fascinating homoleptic organometallic lanthanide complexes with surprisingly good stability. Fundamental studies of the protonolysis chemistry of these complexes ultimately revealed highly versatile lanthanide-based precatalysts that have propelled a catalytic investigation spanning more than a decade. We anticipate that this summative perspective will animate the synthetic as well as biological communities to consider La(DMBA)3-based catalytic methods in the synthesis of functionalized organic scaffolds as an atom-economic, convenient, and efficient methodology. Ultimately, we envision our work making a positive impact on the advancement of novel chemical transformations and contributing to progress in various fields of science and technology.

N,N'-Diaryl-Sulfurdiimides are Strongly Redox Tuned

The synthesis and extensive characterization of nine aryl sulfur diimides (SDIs, Ar-NSN-Ar) are presented with a robust computational and experimental investigation of the fundamental properties of these important members of the thiazyl family of compounds, with particular attention paid to their highly tunable electrochemical behaviour. This is the first work to undertake a systematic comparison of the electrochemical profiles of a coherent series of SDIs to demonstrate and quantify the response of their reduction potentials to substituent electron-donating and -withdrawing properties. This effect is found to be not only exceptionally strong, but also correlates very closely with computed orbital energies. Electron paramagnetic resonance spectroscopy is used to determine the nature, localization, and qualitative lifetimes of the radical anions of SDIs. This work also addresses significant misconceptions about physical properties of SDIs. Experimental data and modern computational methods are employed to provide a resolute answer to the long-standing contention of the solution-state conformations of SDIs, and to correct historical mistakes in the assignment of infrared spectroscopic data. High-quality crystal structures of all SDIs in this work showcase the utility of the recently introduced structural refinement software NoSpherA2, enabling full anisotropic refinement of H-atoms with accurate C-H bond lengths.

Dipolar Coupling as a Mechanism for Fine Control of Magnetic States in ErCOT-Alkyl Molecular Magnets

The design of molecular magnets has progressed greatly by taking advantage of the ability to impart successive perturbations and control vibronic transitions in 4fn systems through the careful manipulation of the crystal field. Herein, we control the orientation and rigidity of two dinuclear ErCOT-based molecular magnets: the inversion-symmetric bridged [ErCOT(μ-Me)(THF)]2 (2) and the nearly linear Li[(ErCOT)2(μ-Me)3] (3). The conserved anisotropy of the ErCOT synthetic unit facilitates the direction of the arrangement of its magnetic anisotropy for the purposes of generating controlled internal magnetic fields, improving control of the energetics and transition probabilities of the electronic angular momentum states with exchange biasing via dipolar coupling. This control is evidenced through the introduction of a second thermal barrier to relaxation operant at low temperatures that is twice as large in 3 as in 2. This barrier acts to suppress through-barrier relaxation by protecting the ground state from interacting with stray local fields while operating at an energy scale an order of magnitude smaller than the crystal field term. These properties are highlighted when contrasted against the mononuclear structure ErCOT(Bn)(THF)2 (1), in which quantum tunneling of the magnetization processes dominate, as demonstrated by magnetometry and ab initio computational methods. Furthermore, far-infrared magnetospectroscopy measurements reveal that the increased rigidity imparted by successive removal of solvent ligands when adding bridging methyl groups, along with the increased excited state purity, severely limits local spin-vibrational interactions that facilitate magnetic relaxation, manifesting as longer relaxation times in 3 relative to those in 2 as temperature is increased.

Dipotassiumtetrachloride-bridged dysprosium metallocenes: a single-molecule magnet

The present work describes the dynamic magnetic properties of the complex [(CpAr3)4DyIII2Cl4K2]·3.5(C7H8) (1), synthesized by employing a tri-aryl-substituted cyclopentadienyl ligand (CpAr3), [4,4'-(4-phenylcyclopenta-1,3-diene-1,2-diyl)bis(methylbenzene) = CpAr3H]. Each Dy(III)-metallocene weakly couples via K2Cl4, displaying slow relaxation of magnetization below 14.5 K under zero applied dc field via KD3 energy levels with an energy barrier of 136.9/133.7 cm-1 on the Dy sites. The single-ion axial anisotropy energy barrier is reduced by geometrical distortion due to the coordination of two chloride ions at each Dy centre.

Are U-U Bonds Inside Fullerenes Really Unwilling Bonds?

Previous characterizations of diactinide endohedral metallofullerenes (EMFs) Th₂@C₈₀ and U₂@C₈₀ have shown that although the two Th³⁺ ions form a strong covalent bond within the carbon cage, the interaction between the U³⁺ ions is weaker and described as an "unwilling" bond. To evaluate the feasibility of covalent U-U bonds, which are neglected in classical actinide chemistry, we have first investigated the formation of smaller diuranium EMFs by laser ablation using mass spectrometric detection of dimetallic U₂@C_2n species with 2n ≥ 50. DFT, CASPT2 calculations, and MD simulations for several fullerenes of different sizes and symmetries showed that thanks to the formation of strong U(5f³)-U(5f³) triple bonds, two U³⁺ ions can be incarcerated inside the fullerene. The formation of U-U bonds competes with U-cage interactions that tend to separate the U ions, hindering the observation of short U-U distances in the crystalline structures of diuranium endofullerenes as in U₂@C₈₀. Smaller cages like C₆₀ exhibit the two interactions, and a strong triple U-U bond with an effective bond order higher than 2 is observed. Although 5f-5f interactions are responsible for the covalent interactions at distances close to 2.5 Å, overlap between 7s6d orbitals is still detected above 4 Å. In general, metal ions within fullerenes should be regarded as templates in cage formation, not as statistically confined units that have little chance of being observed.

Slow Magnetic Relaxation in Mono- and Bimetallic Lanthanide Tetraimido-Sulfate S(NtBu)4 2- Complexes

Lanthanide ions are particularly well-suited for the design of single-molecule magnets owing to their large unquenched orbital angular momentum and strong spin-orbit coupling that gives rise to high magnetic anisotropy. Such nanoscopic bar magnets can potentially revolutionize high-density information storage and processing technologies, if blocking temperatures can be increased substantially. Exploring non-classical ligand scaffolds with the aim to boost the barriers to spin-relaxation are prerequisite. Here, the synthesis, crystallographic and magnetic characterization of a series of each isomorphous mono- and dinuclear lanthanide (Ln=Gd, Tb, Dy, Ho, Er) complexes comprising tetraimido sulfate ligands are presented. The dinuclear Dy complex [{(thf)2 Li(NtBu)2 S(tBuN)2 DyCl2 }2  ⋅ ClLi(thf)2 ] (1c) shows true signatures of single-molecule magnet behavior in the absence of a dc field. In addition, the mononuclear Dy and Tb complexes [{(thf)2 Li(NtBu)2 S(tBuN)2 LnCl2 (thf)2 ] (2b,c) show slow magnetic relaxation under applied dc fields.

Noncovalent Interactions at Lanthanide Complexes

Lanthanide complexes have attracted a widespread attention due to their structural diversity, as well as multifunctional and tunable properties. The development of lanthanide based functional materials has often relied on the design of the secondary coordination sphere of the corresponding lanthanide complexes. For instance, usually simple lanthanide salts (solvento complexes) do not catalyze effectively organic reactions or provide low yield of the expected product, whereas the presence of a suitable organic ligand with a noncovalent bond donor or acceptor centre (secondary coordination sphere) modifies the symmetry around the metal centre in lanthanide complexes which then successfully can act as catalysts in both homogenous and heterogenous catalysis. In this minireview, we discuss several relevant examples, based on X-ray crystal structure analyses, in which the hydrogen, halogen, chalcogen, pnictogen, tetrel and rare-earth bonds, as well as cation-π, anion-π, lone pair-π, π-π and pancake interactions, are used as a synthon in the decoration of the secondary coordination sphere of lanthanide complexes.

Probing Multiconfigurational States by Spectroscopy: The Cerium XAS L3 -edge Puzzle

The Ce L₃ edge XAS spectra of CeO₂ and cerocene [Ce(C₈ H₈ )₂ ] were calculated with relativistic ab-initio multireference wavefunction approaches capable of reproducing the observed spectra accurately. The study aims to resolve the decades-long puzzle regarding the relationship between the number and relative intensities of the XAS peaks and the 4f electron occupation in the ground state (GS) versus the core-excited states (ESs). CeO₂ and cerocene exemplify the different roles of covalent bonding and wavefunction configurational composition in the observed intensity patterns. Good agreement is found between the calculated GS 4f-shell occupations and the value derived from XAS measurements using peak areas (n_f ). The identity of the two-peaked Ce L₃ edge is fully rationalized from the perspective of the relaxed wavefunctions for the GS and core ESs. The states underlying the different peaks differ from each other in a surprisingly simple way that can be associated with 4f¹ vs. 4f⁰ sub-configurations. Furthermore, part of one of the cerocene spectral peaks is associated with 4f² sub-configurations. The pattern therefore reveals excited states that can be interpreted in terms of Ce IV and III oxidation numbers, as long assumed, with Ce II states additionally appearing in the cerocene spectrum. While this work demonstrates the rough accuracy of the conventional approach to determining n_f from Ce L₃ -edge XAS, limitations are highlighted in terms of the ultimate accuracy of this approach and the potential of observing new types of excited states. The need to determine the sources of n_f by calculations, is stressed.

Efficient Synthesis of Cyclic Carbonates from Unsaturated Acids and Carbon Dioxide and their Application in the Synthesis of Biobased Polyurethanes

Bio-derived furan- and diacid-derived cyclic carbonates have been synthesized in high yields from terminal epoxides and CO₂ . Furthermore, four highly substituted terpene-derived cyclic carbonates were isolated in good yields with excellent diastereoselectivity in some cases. Eleven new cyclic carbonates derived from 10-undecenoic acid under mild reaction conditions were prepared, providing the corresponding carbonate products in excellent yields. The catalyst system also performed the conversion of an epoxidized fatty acid n-pentyl ester into a cyclic carbonate under relatively mild reaction conditions (80 °C, 20 bar, 24 h). This bis(cyclic carbonate) was obtained in high yields and with different cis/trans ratios depending on the co-catalyst used. An allyl alcohol by-product was only observed as a minor product when bis(triphenylphosphine)iminium chloride was used as co-catalyst. Finally, two cyclic carbonates were used as building blocks for the preparation of non-isocyanate poly(hydroxy)urethanes by reaction with 1,4-diaminobutane.

Organometallic complexes of neodymium: an overview of synthetic methodologies based on coordinating elements

Organometallic complexes of neodymium have unique coordinating ability to form both micro and macromolecules as well as metal-based polymers. These complexes have been reported in different fields and play a tremendous role in luminescence, catalytic, biological and magnetic applications. So, the current study will comprise all possible routes for the synthesis of organometallic complexes of neodymium. Neodymium complexes have been synthesized of single, double, triple and tetra linkages with H, C, N, O as well as S, B, and X. The detailed synthetic routes have been classified into four categories but in brief, neodymium forms complexes by reacting metal chloride, nitrate or oxide (hydrated or dehydrated) as precursor along with appropriate ligand. Most applied solvents for neodymium complexes were Toluene and THF. These complexes required a range of temperature based on the nature of complexes as well as linkages. The authors have surveyed the research work published through 2011–2020 and provide a comprehensive overview to understand the synthetic routes of organometallic complexes of neodymium.

Unsymmetrical diarylamido-based rare-earth alkyl complexes: their synthesis and catalytic performance in isoprene polymerization

A family of rare-earth complexes bearing diarylamido-based pincer ligands with phosphino-, phenylthio- and quinolino-sidearms have been synthesized and fully characterized. Upon activation by [Ph₃C][B(C₆F₅)₄], the scandium (P-Sc and S-Sc) and yttrium complexes (P-Y and S-Y) could catalyze the polymerization of isoprene with cis-1,4 selectivity (up to 98.8%), while the lutetium analogues P-Lu and S-Lu produced trans-1,4 selective polyisoprene (up to 83.3%). Density functional theory (DFT) calculations were carried out to clarify the mechanisms for the metal-dependent stereoselective (cis to trans) polymerization of isoprene catalyzed by P-Sc, P-Y and P-Lu, suggesting that kinetically and thermodynamically more favorable insertion-isomerization during chain propagation is the key reason for P-Lu catalyzed trans-stereoselective isoprene polymerization.

Tris-{hydridotris(1-pyrazolyl)borato}actinide Complexes: Synthesis, Spectroscopy, Crystal Structure, Bonding Properties and Magnetic Behaviour

The isostructural compounds of the trivalent actinides uranium, neptunium, plutonium, americium, and curium with the hydridotris(1-pyrazolyl)borato (Tp) ligand An[η3 -HB(N2 C3 H3 )3 ]3 (AnTp3 ) have been obtained through several synthetic routes. Structural, spectroscopic (absorption, infrared, laser fluorescence) and magnetic characterisation of the compounds were performed in combination with crystal field, density functional theory (DFT) and relativistic multiconfigurational calculations. The covalent bonding interactions were analysed in terms of the natural bond orbital (NBO) and quantum theory of atoms in molecules (QTAIM) models.

Stable Actinide π Complexes of a Neutral 1,4-Diborabenzene

The π coordination of arene and anionic heteroarene ligands is a ubiquitous bonding motif in the organometallic chemistry of d-block and f-block elements. By contrast, related π interactions of neutral heteroarenes including neutral bora-π-aromatics are less prevalent particularly for the f-block, due to less effective metal-to-ligand backbonding. In fact, π complexes with neutral heteroarene ligands are essentially unknown for the actinides. We have now overcome these limitations by exploiting the exceptionally strong π donor capabilities of a neutral 1,4-diborabenzene. A series of remarkably robust, π-coordinated thorium(IV) and uranium(IV) half-sandwich complexes were synthesized by simply combining the bora-π-aromatic with ThCl4 (dme)2 or UCl4 , representing the first examples of actinide complexes with a neutral boracycle as sandwich-type ligand. Experimental and computational studies showed that the strong actinide-heteroarene interactions are predominately electrostatic in nature with distinct ligand-to-metal π donation and without significant π/δ backbonding contributions.

Heteroleptic actinocenes: a thorium(iv)-cyclobutadienyl-cyclooctatetraenyl-di-potassium-cyclooctatetraenyl complex

Despite the vast array of η n -carbocyclic C5-8 complexes reported for actinides, cyclobutadienyl (C4) remain exceedingly rare, being restricted to six uranium examples. Here, overcoming the inherent challenges of installing highly reducing C4-ligands onto actinides when using polar starting materials such as halides, we report that reaction of [Th(η8-C8H8)2] with [K2{C4(SiMe3)4}] gives [{Th(η4-C4[SiMe3]4)(μ-η8-C8H8)(μ-η2-C8H8)(K[C6H5Me]2)}2{K(C6H5Me)}{K}] (1), a new type of heteroleptic actinocene. Quantum chemical calculations suggest that the thorium ion engages in π- and δ-bonding to the η4-cyclobutadienyl and η8-cyclooctatetraenyl ligands, respectively. Furthermore, the coordination sphere of this bent thorocene analogue is supplemented by an η2-cyclooctatetraenyl interaction, which calculations suggest is composed of σ- and π-symmetry donations from in-plane in- and out-of-phase C[double bond, length as m-dash]C 2p-orbital combinations to vacant thorium 6d orbitals. The characterisation data are consistent with this being a metal-alkene-type interaction that is integral to the bent structure and stability of this complex.

Oxidation of a Dithieno[3,4-b:3',4'-d]thiophene Cyclic Dimer Containing a Planar Cyclooctatetraene Ring: Retention of High Antiaromaticity During Reactions

One-electron and peracid oxidations of dithieno[3,4-b : 3',4'-d]thiophene cyclic dimer, which contains an antiaromatic planar cyclooctatetraene (COT) core, were conducted. The reaction of the cyclic dimer with SbCl₅ produced isolable radical cation salts. Density functional theory (DFT) calculations showed that the spin density of the radical cation resides not on the COT ring but on the peripheral sulfur and carbon atoms in the thiophene unit with retention of high antiaromaticity based on the nucleus-independent chemical shift (NICS). The peracid oxidation of the cyclic dimer was found to proceed not on the COT ring but on the bridging sulfur atom in the dithienothiophene moiety. The retention of the high antiaromaticity of the COT ring after the sulfoxide formation was experimentally confirmed based on the relative hardness, and also was theoretically supported by NICS calculations. Interestingly, the DFT calculations suggested that the high antiaromaticity does not enhance the reactivity towards the epoxidation on the COT ring.

Highly selective redistribution of primary arylsilanes to secondary arylsilanes catalyzed by Ln(CH2C6H4NMe2-o)3@SBA-15

The organometallic–inorganic hybrid materials Ln(CH₂C₆H₄NMe₂-o)₃@SBA-15 (Ln = La, Y) were prepared, which demonstrated extremely high selectivity (>99%) in catalyzing the redistribution of primary arylsilanes to secondary arylsilanes.

f-Element Half-Sandwich Complexes: A Tetrasilylcyclobutadienyl-Uranium(IV)-Tris(tetrahydroborate) Anion Pianostool Complex

Despite there being numerous examples of f-element compounds supported by cyclopentadienyl, arene, cycloheptatrienyl, and cyclooctatetraenyl ligands (C_5-8 ), cyclobutadienyl (C₄ ) complexes remain exceedingly rare. Here, we report that reaction of [Li₂ {C₄ (SiMe₃ )₄ }(THF)₂ ] (1) with [U(BH₄ )₃ (THF)₂ ] (2) gives the pianostool complex [U{C₄ (SiMe₃ )₄ }(BH₄ )₃ ][Li(THF)₄ ] (3), where use of a borohydride and preformed C₄ -unit circumvents difficulties in product isolation and closing a C₄ -ring at uranium. Complex 3 is an unprecedented example of an f-element half-sandwich cyclobutadienyl complex, and it is only the second example of an actinide-cyclobutadienyl complex, the other being an inverse-sandwich. The U-C distances are short (av. 2.513 Å), reflecting the formal 2- charge of the C₄ -unit, and the SiMe₃ groups are displaced from the C₄ -plane, which we propose maximises U-C₄ orbital overlap. DFT calculations identify two quasi-degenerate U-C₄ π-bonds utilising the ψ₂ and ψ₃ molecular orbitals of the C₄ -unit, but the potential δ-bond using the ψ₄ orbital is vacant.

Unprecedentedly High Activity and/or High Regio-/Stereoselectivity of Fluorenyl-Based CGC Allyl-Type η3:η1-tert-Butyl(dimethylfluorenylsilyl)amido Ligated Rare Earth Metal Monoalkyl Complexes in Olefin Polymerization

A series of fluorenyl-based constrained-geometry-configuration (CGC) allyl-type rare earth metal monoalkyl complexes bearing the divalent anionic η3:η1-tert-butyl(dimethylfluorenylsilyl)amido (η3:η1-FluSiMe2NtBu) ligand (η3:η1-FluSiMe2NtBu)Ln(CH2SiMe3)(THF)2 (1-3) have been synthesized via the alkane elimination reaction between the FluHSiMe2NHtBu ligand and rare earth metal tri(trimethylsilylmethyl) complexes Ln(CH2SiMe3)3(THF)n. Their structures are characterized by means of NMR spectrum, elemental analyses, and X-ray diffraction. These complexes 1-3 are isostructural and isomorphous, and each of them adopts a distorted-trigonal-bipyramidal configuration containing one η3:η1-FluSiMe2NtBu ligand, one CH2SiMe3 ligand, and two THF molecules. Unlike traditional CGC allyl-type rare earth metal complexes showing no or low activity and regio-/stereoselectivity in styrene or MMA polymerization, these complexes 1-3 exhibit high catalytic activities and/or high regio-/stereoselectivities in the cis-1,4-polymerization of isoprene and myrcene or in the syndiotactic polymerization of styrene under the aid of different activators (borate or borane) and AlR3. The in situ 1H NMR spectra suggest that the exchanges of chelating ligands such as alkyl groups and divalent anionic η3:η1-FluSiMe2NtBu ligands between rare earth metal centers and Al centers result in the formation of a heterobimetallic tetraalkylaluminate complex R2Al(μ-R)2Ln(R)(μ-R)2AlR2, which is activated by activators to form a divalent cationic species [Ln(μ-R)2AlR2]2+ as a catalytically active species in the coordination-insertion polymerization of olefins.

Versatility of cyclooctatetraenyl ligands in rare earth metal complexes of the [M2(COT)3(THF)2] (M = Y and La) type

Two new organometallic cyclooctatetraenyl complexes of the type [M2(COT)3(THF)2] (M = Y and La) have been prepared, using optimized synthetic procedures, and fully characterized by X-ray diffraction analysis, IR and 1H NMR spectroscopies. The structures can be represented as formed by the double-decker [M(COT)2]- anion with an asymmetrically bound cationic [M(COT)(THF)2]+ unit. The COT rings in the anionic sandwich are not equidistant from the metal with the M-COTcentroid distances measuring at 1.991(5) Å and 2.074(5) Å for [Y(COT)2]-vs. 2.045(4) Å and 2.154(5) Å for [La(COT)2]-. The sandwich fragments are η2-coordinated to the second metal center with the average M-C distances of 2.837(4) Å and 2.879(5) Å for yttrium and lanthanum complexes, respectively. The M-COTcentroid distances in the cationic unit are 1.962(4) Å for the former and 2.009(2) Å for the latter.

Actinide Organometallic Complexes with π-Ligands

Recent developments and results from the organometallic chemistry of the actinides are reviewed. In the last one and a half years the structural data of about 15 organometallic complexes of transuranium actinides (Np or Pu) have been published, all involving π-ligands in the coordination sphere of the metal ion. On the basis of these data, a comparison of these molecules is presented. Depending on the steric demands of the ligands, effects like the actinide contraction seem to be stronger or weaker in the structural features. This indicates that the interplay between the actinide ion and the π-ligand is rather flexible, enabling the formation of stable bonds over a broad range of actinide ion oxidation states.

Synthesis of a dinuclear europium(iii) complex through deprotonation and oxygen-atom transfer of trimethylamine N-oxide

A dinuclear europium complex was synthesized via unprecedented deprotonation and oxygen-atom transfer of Me₃NO.

Cyclopentadienyl Ligands in Lanthanide Single-Molecule Magnets: One Ring To Rule Them All?

The discovery of materials capable of storing magnetic information at the level of single molecules and even single atoms has fueled renewed interest in the slow magnetic relaxation properties of single-molecule magnets (SMMs). The lanthanide elements, especially dysprosium, continue to play a pivotal role in the development of potential nanoscale applications of SMMs, including, for example, in molecular spintronics and quantum computing. Aside from their fundamentally fascinating physics, the realization of functional materials based on SMMs requires significant scientific and technical challenges to be overcome. In particular, extremely low temperatures are needed to observe slow magnetic relaxation, and while many SMMs possess a measurable energy barrier to reversal of the magnetization ( U_eff), very few such materials display the important properties of magnetic hysteresis with remanence and coercivity. Werner-type coordination chemistry has been the dominant method used in the synthesis of lanthanide SMMs, and most of our knowledge and understanding of these materials is built on the many important contributions based on this approach. In contrast, lanthanide organometallic chemistry and lanthanide magnetochemistry have effectively evolved along separate lines, hence our goal was to promote a new direction in single-molecule magnetism by uniting the nonclassical organometallic synthetic approach with the traditionally distinct field of molecular magnetism. Over the last several years, our work on SMMs has focused on obtaining a detailed understanding of why magnetic materials based on the dysprosium metallocene cation building block {Cp₂Dy}⁺ display slow magnetic relaxation. Specifically, we aspired to control the SMM properties using novel coordination chemistry in a way that hinges on key considerations, such as the strength and the symmetry of the crystal field. In establishing that the two cyclopentadienyl ligands combine to provide a strongly axial crystal field, we were able to propose a robust magneto-structural correlation for understanding the properties of dysprosium metallocene SMMs. In doing so, a blueprint was established that allows U_eff and the magnetic blocking temperature ( T_B) to be improved in a well-defined way. Although experimental discoveries with SMMs occur more rapidly than quantitative theory can (currently) process and explain, a clear message emanating from the literature is that a combination of the two approaches is most effective. In this Account, we summarize the main findings from our own work on dysprosium metallocene SMMs, and consider them in the light of related experimental studies and theoretical interpretations of related materials reported by other protagonists. In doing so, we aim to contribute to the nascent and healthy debate on the nature of spin dynamics in SMMs and allied molecular nanomagnets, which will be crucial for the further advancement of this vibrant research field.