Adsorption behavior of engineered carbons and carbon nanomaterials for metal endocrine disruptors: Experiments and theoretical calculation

Insights into the biogeochemical transformation, environmental impacts and biochar-based soil decontamination of antimony

Every year, a significant amount of antimony (Sb) enters the environment from natural and anthropogenic sources like mining, smelting, industrial operations, ore processing, vehicle emissions, shooting activities, and coal power plants. Humans, plants, animals, and aquatic life are heavily exposed to hazardous Sb or antimonide by either direct consumption or indirect exposure to Sb in the environment. This review summarizes the current knowledge about Sb global occurrence, its fate, distribution, speciation, associated health hazards, and advanced biochar composites studies used for the remediation of soil contaminated with Sb to lessen Sb bioavailability and toxicity in soil. Anionic metal(loid) like Sb in the soil is significantly immobilized by pristine biochar and its composites, reducing their bioavailability. However, a comprehensive review of the impacts of biochar-based composites on soil Sb remediation is needed. Therefore, the current review focuses on (1) the fundamental aspects of Sb global occurrence, global soil Sb contamination, its transformation in soil, and associated health hazards, (2) the role of different biochar-based composites in the immobilization of Sb from soil to increase biochar applicability toward Sb decontamination. The review aids in developing advanced, efficient, and effective engineered biochar composites for Sb remediation by evaluating novel materials and techniques and through sustainable management of Sb-contaminated soil, ultimately reducing its environmental and health risks.

Revitalizing contaminated lands: A state-of-the-art review on the remediation of mine-tailings using phytoremediation and genomic approaches

The mining industry has historically served as a critical reservoir of essential raw materials driving global economic progress. Nevertheless, the consequential by-product known as mine tailings has consistently produced a substantial footprint of environmental contamination. With annual discharges of mine tailings surpassing 10 billion tons globally, the need for effective remediation strategies is more pressing than ever as traditional physical and chemical remediation techniques are hindered by their high costs and limited efficacy. Phytoremediation utilizing plants for remediation of polluted soil has developed as a promising and eco-friendly approach to addressing mine tailings contamination. Furthermore, sequencing of genomic DNA and transcribed RNA extracted from mine tailings presents a pivotal opportunity to provide critical supporting insights for activities directed towards the reconstruction of ecosystem functions on contaminated lands. This review explores the growing prominence of phytoremediation and metagenomics as an ecologically sustainable techniques for rehabilitating mine-tailings. The present study envisages that plant species such as Solidago chilensis, Festuca arundinacea, Lolium perenne, Polygonum capitatum, Pennisetum purpureum, Maireana brevifolia, Prosopis tamarugo etc. could be utilized for the remediation of mine-tailings. Furthermore, a critical evaluation of the organic and inorganic ammendments that optimize conditions for the remediation of mine tailings is also provided. The focus of this review extends to the exploration of environmental genomics to characterize microbial communities in mining sites. By delving into the multifaceted dimensions of phytoremediation and genomics for mine tailings, this study contributes to the ongoing efforts to revitalize contaminated lands for a sustainable and environmentally friendly future.

Individual and combined impact of microplastics and lead acetate on the freshwater shrimp (Caridina fossarum): Biochemical effects and physiological responses

Microplastics and heavy metals pollution is recognised as a major problem affecting aquatic ecosystems. For this reason, this study aims to assess the toxicity of different concentrations of polyethylene microplastics (PE-MPs) (0.0, 500, and 1000 μg L-1) with a mean size of 15-25 μm and lead acetate Pb(C2H3O2)2 (0.0, 2.5, and 5 mg L-1), both individually and in combination, through the exposure of the freshwater grass shrimp, Caridinia fossarum for 15 days, focusing on microplastic interaction with co-occurring contaminants. After being exposed to both contaminants, either individually or in combination, significant alterations in numerous biochemical markers were observed. Specifically, exposure to lead acetate alone resulted in significant changes across ALP, AST, ALT, LDH, GGT, and BChE enzyme activity levels indicating hepatotoxicity and neurotoxicity. Also, Pb exposure led to alterations in total antioxidant capacity, MDA, total lipids, and glycogen contents, signalling the onset of oxidative stress. Exposure to PE-MPs alone led to changes in ALP, LDH, GGT, and BChE enzyme levels, and in MDA, total lipids, and glycogen samples' contents. Remarkably, the study observed increased bioaccumulation of lead acetate in samples treated with the combination, emphasizing the synergistic impact of PE-MPs on the toxicity of lead acetate. This synergy was also evident in AST and ALT enzyme activity levels and MDA contents. This underscores the necessity for measures to address both microplastic pollution and heavy metal contamination, taking into account the synergistic behaviour of MPs in the presence of concurrent contaminants.

Pristine and modified biochar applications as multifunctional component towards sustainable future: Recent advances and new insights

Employing biomass for environmental conservation is regarded as a successful and environmentally friendly technique since they are cost-effective, renewable, and abundant. Biochar (BC), a thermochemically converted biomass, has a considerably lower production cost than the other conventional activated carbons. This material's distinctive properties, including a high carbon content, good electrical conductivity (EC), high stability, and a large surface area, can be utilized in various research fields. BC is feasible as a renewable source for potential applications that may achieve a comprehensive economic niche. Despite being an inexpensive and environmentally sustainable product, research has indicated that pristine BC possesses restricted properties that prevent it from fulfilling the intended remediation objectives. Consequently, modifications must be made to BC to strengthen its physicochemical properties and, thereby, its efficacy in decontaminating the environment. Modified BC, an enhanced iteration of BC, has garnered considerable interest within academia. Many modification techniques have been suggested to augment BC's functionality, including its adsorption and immobilization reliability. Modified BC is overviewed in its production, functionality, applications, and regeneration. This work provides a holistic review of the recent advances in synthesizing modified BC through physical, chemical, or biological methods to achieve enhanced performance in a specific application, which has generated considerable research interest. Surface chemistry modifications require the initiation of surface functional groups, which can be accomplished through various techniques. Therefore, the fundamental objective of these modification techniques is to improve the efficacy of BC contaminant removal, typically through adjustments in its physical or chemical characteristics, including surface area or functionality. In addition, this article summarized and discussed the applications and related mechanisms of modified BC in environmental decontamination, focusing on applying it as an ideal adsorbent, soil amendment, catalyst, electrochemical device, and anaerobic digestion (AD) promoter. Current research trends, future directions, and academic demands were available in this study.

Combining computational tools and experimental studies towards endocrine disruptors mitigation: A review of biocatalytic and adsorptive processes

The endocrine disruptors (EDCs) are an important group of emerging contaminants, and their mitigation has been a huge challenge due to their chemistry complexity and variety of these compounds. The traditional treatments are inefficient to completely remove EDCs, and adsorptive processes are the major alternative investigated on their removal. Also, the use of EDCs degrading enzymes has been encouraged due to ecofriendly approach of biocatalytic processes. This paper highlights the occurrence, classification, and toxicity of EDCs with special focus in the use of enzyme-based and adsorptive technologies in the elimination of EDCs from ambiental matrices. Numerous prior reviews have focused on the discussions toward these technologies. However, the literature lacks theoretical discussions about important aspects of these methods such as the mechanisms of EDCs adsorption on the adsorbent surface or the interactions between degrading enzymes - EDCs. In this sense, theoretical calculations combined to experimental studies may help in the development of more efficient technologies to EDCs mitigation. In this review, we point out how computational tools such as molecular docking and molecular dynamics have to contribute to the design of new adsorbents and efficient catalytic processes towards endocrine disruptors mitigation.

Efficient and selective removal of mercury ions from aqueous solution by 2,5-dimercaptothiadiazole covalently grafted chitosan derivative

The increasingly serious problem of mercury pollution has caused wide concern, and exploring the adsorbent materials with high adsorption capacity is a simple and effective approach to address this concern. In this study, chitosan (CS), 2,5-dimercaptothiadiazole (DMTD) and formaldehyde solution are used as raw materials to prepare the modified CS material (DMTD-CS) by one-pot method. Adequate characterizations suggest that DMTD-CS is highly cross-linked, and the specific surface area and pore volume are 126.91 m2/g and 0.6702 cm3/g, respectively. By investigating the Hg(II) adsorption properties of DMTD-CS, the maximum adsorption capacity at 318 K reaches 628.09 mg/g, this value is higher than that of CS and most of the reported CS derivatives. Adsorption kinetics and isotherms indicate that the adsorption behaviors of DMTD-CS conform to the pseudo-second-order kinetic model and Langmuir isotherm model, and in the coexistence of various metal ions, DMTD-CS shows very good selectivity for Hg(II). Additionally, the removal of DMTD-CS to Hg(II) is still at 80.06 % after six adsorption-desorption cycles, demonstrating outstanding recyclability. The further FT-IR and XPS analysis suggest that the synergistic complexation of O, N and S atoms on DMTD-CS with Hg(II) is an important factor leading to the high adsorption capacity.

Past, present and future trends in the remediation of heavy-metal contaminated soil - Remediation techniques applied in real soil-contamination events

Most worldwide policy frameworks, including the United Nations Sustainable Development Goals, highlight soil as a key non-renewable natural resource which should be rigorously preserved to achieve long-term global sustainability. Although some soil is naturally enriched with heavy metals (HMs), a series of anthropogenic activities are known to contribute to their redistribution, which may entail potentially harmful environmental and/or human health effects if certain concentrations are exceeded. If this occurs, the implementation of rehabilitation strategies is highly recommended. Although there are many publications dealing with the elimination of HMs using different methodologies, most of those works have been done in laboratories and there are not many comprehensive reviews about the results obtained under field conditions. Throughout this review, we examine the different methodologies that have been used in real scenarios and, based on representative case studies, we present the evolution and outcomes of the remediation strategies applied in real soil-contamination events where legacies of past metal mining activities or mine spills have posed a serious threat for soil conservation. So far, the best efficiencies at field-scale have been reported when using combined strategies such as physical containment and assisted-phytoremediation. We have also introduced the emerging problem of the heavy metal contamination of agricultural soils and the different strategies implemented to tackle this problem. Although remediation techniques used in real scenarios have not changed much in the last decades, there are also encouraging facts for the advances in this field. Thus, a growing number of mining companies publicise in their webpages their soil remediation strategies and efforts; moreover, the number of scientific publications about innovative highly-efficient and environmental-friendly methods is also increasing. In any case, better cooperation between scientists and other soil-related stakeholders is still required to improve remediation performance.

Dodonaea angustifolia Extract-Assisted Green Synthesis of the Cu2O/Al2O3 Nanocomposite for Adsorption of Cd(II) from Water

The enhanced worldwide concern for the protection and safety of the environment has made the scientific community focus their devotion on novel and highly effective approaches to heavy metals such as cadmium (Cd) pollutant removal. In this research, Dodonaea angustifolia plant extract-mediated Al₂O₃ and Cu₂O nanoparticle (NP) syntheses were accomplished using the coprecipitation method, and the Cu₂O/Al₂O₃ nanocomposite was prepared by simple mixing of Cu₂O and Al₂O₃ NPs for the removal of Cd(II) ions from aqueous solution. Therefore, an efficient green, economical, facile, and eco-friendly synthesis method was employed, which improved the aggregation of individual metal oxide NPs. The chemical and physical properties of the nanocomposite were examined by different characterization techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and Brunauer-Emmett-Teller (BET) surface area analysis. Furthermore, the performances of the nanoadsorbents for the adsorptive eradication of Cd²⁺ ions from water were investigated. The influence of pH, contact time, initial Cd quantity, and nanocomposite amount on adsorption effectiveness was carefully studied. The adsorption rates of the Cu₂O/Al₂O₃ nanocomposite were rapid, and adsorption equilibrium was attained within 60 min for 97.36% removal of Cd(II) from water. The adsorption isotherm data were best fitted by the pseudo-second-order kinetic and Langmuir isotherm models with the highest adsorption ability of 4.48 mg/g. Therefore, the synthesized Cu₂O/Al₂O₃ nanocomposite could be a potential candidate for a highly efficient adsorbent for heavy metal ion removal from aqueous solutions.

Adsorption of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar to Sb3+: Application of DFT calculation

The pollution and harm of Sb³⁺ to aquatic systems is a global problem, so Sb³⁺ removal from the water environment to make sure environment safety and human beings wellbeing is of urgency. This study explored the effect of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar (CEBC) on adsorbing Sb³⁺ through batch adsorption experiments. The experiments indicated CEBC's maximum adsorption capacity to Sb³⁺ is 170.15 mg·g^-1. Meanwhile, the capacity of the original biochar (EBC) is only 9.97 mg·g^-1. Compared with EBC, CEBC contains more functional groups, such as CO, -OH and -NH₂. In addition, the pseudo-second-order kinetic model and the Langmuir model are fit to describe the kinetics and isotherms of adsorption of CEBC to Sb³⁺, which suggests that the adsorption of CEBC to Sb³⁺ is dominated by monolayer chemisorption. Density functional theory (DFT) calculations confirmed that the chelation between -NH₂ and Sb³⁺ is of significance in the adsorption process of CEBC. DFT calculations also found that the newly added -OH and CO in EBC have a synergistic enhancement effect on the absorption of Sb³⁺. The mechanism of CEBC absorbing Sb³⁺ includes electrostatic interactions, pore filling, Л-Л interactions, hydrogen bonding, functional group complexation, chelation, and oxidation. CEBC has an excellent anti-interference ability for inorganic anions (NO₃^-, SO₄^2- and Cl^-) and can also use the coexisting HA to improve its adsorption performance. In addition, CEBC has better mitigation of Sb³⁺ on the performance of Sb³⁺ about its secondary release and good reproducibility, which indicates that CEBC is a viable Sb³⁺ adsorbent.

Hydrothermal synthesis of sewage sludge biochar for activation of persulfate for antibiotic removal: Efficiency, stability and mechanism

The use of biochar materials as catalysts to activate persulfate (PS) for the degradation of antibiotics has attracted much attention. In this study, a carbonaceous material (Cu/Zn-SBC) was prepared from sewage sludge by hydrothermal modification. The efficiency of PS activation by Cu/Zn-SBC was investigated using tetracycline (TC) as the model antibiotic. In the Cu/Zn-SBC + PS system, the TC removal rate reached 90.13% at 10 min and exceeded 99% within 4 h. This not only met the requirement of removing large amounts of pollutants in a short time but also achieved the complete removal of pollutants in the subsequent time. Additionally, the Cu/Zn-SBC + PS system was found to be dominated by radical and nonradical pathways. Cu, hydroxyl and carboxyl groups on the surface of Cu/Zn-SBC promoted the production of free radicals and non-free radicals. Under several changes in reaction conditions and water environment factors, the TC removal rate remained above 85% within 10 min. Furthermore, the removal rate of TC was still 85.79% when Cu/Zn-SBC combined with PS was reused twice and 77.14% when reused four times. This study provides an ideal solution for the treatment of sewage sludge, and offers a stable and efficient material for removing antibiotics from wastewater.

Chemical modification of biochars as a method to improve its surface properties and efficiency in removing xenobiotics from aqueous media

Biochar (BC) is a carbonaceous material produced by pyrolysis of biomass, applied in various areas such as water purification, fuel production, soil amendment, etc. Many types of BC are characterized by insufficient textural parameters or poor surface chemistry, and hence by low adsorption capacity. This makes innovative chemical methods increasing BC ability to remove xenobiotics from aquatic environments highly needed. Many of them have already been described in the literature. This review presents them in detail and evaluates their effectiveness in improving textural parameters, surface chemistry, and adsorption capacity of BC.

The influence of alkali-modified biochar on the removal and release of Zn in bioretention systems: Adsorption and immobilization mechanism

Generally, Zn in stormwater runoff is considered as low toxicity, but in the senarios of roads and zinc-based materials roof runoff, the concentration of Zn becomes extremely high and cannot be ignored. Bioretention systems are used to remove heavy metals from stormwater runoff, while Zn adsorption is insufficient by conventional filler and is prone to secondary release when exposed to acid rain or high salinity runoff. This study integrated batch experiments and density functional theory calculation to investigate the mechanisms of how KOH-modified biochar (KBC) influences the removal and release of Zn in bioretention systems. The results revealed that KBC adsorbed 89.0-97.5% Zn in the influent, the main adsorption mechanism were complexation and precipitation, and precipitation is more important. In addition, 67% of Zn was immoblized as the residual form by KBC. In acidic and saline runoff, KBC reduced Zn secondary release by 43.6% and 37.08% compared to the results in the absence of KBC, which was attributed to the convertion of most dissolved Zn in acidic and saline runoff into residual Zn. Therefore, KBC has a considerable application potential not only to decontaminate the runoff of roads and Zn-containing roofs, but also to deal with secondary Zn release in acid rain or under the treatment of snow-melting agents.

Versatile strategy of sulfanilamide antibiotics removal via microalgal biochar: Role of oxygen-enriched functional groups

Biochar (BC) adsorption has been widely acknowledged as an efficient approach for the removal of antibiotics. Despite the importance of oxygen-containing functional groups for the antibiotics removal, most of these may be obtained in BC only relying on the addition of oxidants. Herein, an environmentally friendly and oxygen-enriched functional groups adsorbent, namely Chlamydomonas BC (CBC), was fabricated via simple pyrolysis process. Then, the H-bonding, electron donor-acceptor and electrostatic attraction were identified as the main mechanisms regarding sulfathiazole (STZ) adsorption (506.38 mg/g). The carbon-oxygen functional groups on the surface of CBC (61%), especially -COOH and -OH, acted as a pivotal component. Additionally, further theoretical calculation led to the observation that STZ exhibited the highest chemical reactivity (η = 0.04), strong electron exchange capacity (μ = -0.16), remarkable electron accepting capacity (ω = 0.28) and excellent electron transfer efficiency (E_HOMO-E_LUMO gap = 0.29) under the influence of thiazolyl. The electrophilic sulfonamide group and the nucleophilic thiazole were identified as the main active sites of STZ. In summary, the results of this research provide a guiding role for the preparation of adsorbents driven by the structural characteristics of pollutants.

Novel sphere-like copper bismuth oxide fabricated via ethylene glycol-introduced solvothermal method with improved adsorptive and photocatalytic performance in sulfamethazine removal

In this research, ethylene glycol-introduced solvothermal method was employed to fabricate a novel sphere-like CuBi₂O₄ material to improve the adsorptive and photocatalytic performance of conventional CuBi₂O₄. A series of characterization has been applied to investigate properties of the obtained CuBi₂O₄ (CBO-EG3). Compared with conventional rod-like CuBi₂O₄ (CBO), the synthesized sphere-like CBO-EG3 exhibited rough surface, larger specific surface area, and more effective separation of photo-generated carriers, which overcome main shortcomings of CuBi₂O₄. The removal efficiency of typical antibiotic sulfamethazine (SMZ) reached almost 100% under the optimal experimental conditions. About 70% of SMZ could be adsorbed in 180-min dark reaction, with residual being photodegraded in 30 min. CBO-EG3 showed much higher photocatalytic efficiency than pure CBO, attributing to its highly effective photo-induced electron and hole separation. Meanwhile, substantial adsorption of pollutant on CBO-EG3 contributed vastly to removal of SMZ, photo-generated electrons and holes inclined to react with adsorbed SMZ directly, and photocatalytic process was mainly led by non-radical reaction. Elimination of SMZ in actual water samples and recycling experiment were also performed to evaluate CBO-EG3's practical application potential. This study delivered a method to promote CuBi₂O₄'s adsorptive and photocatalytic ability, which could expand the application of CuBi₂O₄ in wastewater treatment.

Hierarchically porous biochar templated by in situ formed ZnO for rapid Pb2+ and Cd2+ adsorption in wastewater: Experiment and molecular dynamics study

3D hierarchical porous biochar (HPBC) was synthesized by a thermally removable template without post-activation. Zn(NO₃)₂ decomposition produced gases and ZnO in situ to activate and expand the three-dimensional micro-and mesopores. Compared with pristine biochar (BC), the specific surface area and pore volume of HPBC were increased by 223 and 75 times, respectively. The abundant pore structure of HPBC significantly enhanced the diffusion rate of heavy metals. For example, compared to BC, the time required for HPBC to adsorb Pb²⁺ reach adsorption equilibrium was reduced by 87.5% (40 min vs 5min). Such an adsorption performance of HPBC was also insensitive to different background ions (K⁺, Na⁺, Ca²⁺, and Mg²⁺) with a much higher concentration than that of heavy metals. When applied to treat desulfurization wastewater from power plants, HPBC yielded 100% removal of Pb²⁺ and Cd²⁺, much higher than that by using commercial activated carbon (28%). Molecular dynamics simulation revealed different locations preferred by the adsorption of Pb²⁺ (micropores) and Cd²⁺ (mesopores) in the hierarchical pore structures. The adsorption of Pb²⁺ and Cd²⁺ on HPBC was mainly achieved by diffusion, oxygen functional group complexation, and precipitation. These results provided better knowledge to understand the microscopic adsorption mechanisms of heavy metals in hierarchical pores and a facile yet robust strategy to design such structures in biochar for efficient wastewater treatment.

Periodate activated by manganese oxide/biochar composites for antibiotic degradation in aqueous system: Combined effects of active manganese species and biochar

Developing efficient catalysts for oxytetracycline (OTC) degradation is an ideal strategy to tackle environmental pollution, and advanced oxidation processes (AOPs) have been widely used for its degradation. However, the studies on the activation of periodate (PI) by biochar and its composites in recent years have been scarcely reported. In this study, we focused on the degradation of OTC by PI activation with manganese oxide/biochar composites (Mn_xO_y@BC). Experimental results showed that the OTC degradation rate of Mn_xO_y@BC/PI system reached almost 98%, and the TOC removal efficiency reached 75%. Various characteristic analysis proved that PI could be activated efficiently by surface functional groups and manganese-active species (Mn(II), Mn(III), and Mn(IV)) on biochar, and various reactive species such as singlet oxygen (¹O₂), hydroxyl radical (∙OH), and superoxide radical (O₂^∙-) can be observed via radical quenching experiments. Based on this, three degradation pathways were proposed. Furthermore, Mn_xO_y@BC and PI were combined to degrade environmental pollutants, which achieved excellent practical benefits and had great practical application potential. We hope that it can provide new ideas for advanced oxidation processes (AOPs) applying for wastewater treatment in the future.

Amoxicillin Retention/Release in Agricultural Soils Amended with Different Bio-Adsorbent Materials

The antibiotic amoxicillin (AMX) may reach soils and other environmental compartments as a pollutant, with potential to affect human and environmental health. To solve/minimize these hazards, it would be clearly interesting to develop effective and low-cost methods allowing the retention/removal of this compound. With these aspects in mind, this work focuses on studying the adsorption/desorption of AMX in different agricultural soils, with and without the amendment of three bio-adsorbents, specifically, pine bark, wood ash and mussel shell. For performing the research, batch-type experiments were carried out, adding increasing concentrations of the antibiotic to soil samples with and without the amendment of these three bio-adsorbents. The results showed that the amendments increased AMX adsorption, with pine bark being the most effective. Among the adsorption models that were tested, the Freundlich equation was the one showing the best fit to the empirical adsorption results. Regarding the desorption values, there was a decrease affecting the soils to which the bio-adsorbents were added, with overall desorption not exceeding 6% in any case. In general, the results indicate that the bio-adsorbents under study contributed to retaining AMX in the soils in which they were applied, and therefore reduced the risk of contamination by this antibiotic, which can be considered useful and relevant to protect environmental quality and public health.

Enhanced sorption of trivalent antimony by chitosan-loaded biochar in aqueous solutions: Characterization, performance and mechanisms

Contamination of aquatic systems by antimony (Sb) is a worldwide issue due to its risks to eco-environment and human health. Batch sorption experiments were conducted to assess the equilibrium, kinetics and thermodynamics of antimonite [Sb(III)] sorption by pristine biochar (BC) and chitosan-loaded biochar (CHBC) derived from branches of Ficus microcarpa. Results showed the successful loading of chitosan onto biochar surface, exhibiting more functional groups (e.g., CO, -NH₂, and -OH). Langmuir model well described the Sb(III) sorption isotherm experimental data, and the maximum sorption capacity of Sb(III) by CH₁BC (biochar loaded with chitosan at a ratio of 1:1) was 168 mg g^-1, whereas for the BC it was only 10 mg g^-1. X-ray photoelectron spectroscopy demonstrated that CH₁BC oxidized 86% of Sb(III) to Sb(V), while BC oxidized 71% of Sb(III). Density functional theory calculations suggested that the synergistic effect of exogenous hydroxyl and inherent carbonyl contributed to the enhanced removal efficiency of Sb(III) by CHBC. Key mechanisms for Sb(III) sorption onto CHBCs included electrostatic interaction, chelation, surface complexation, π-π interaction, and hydrogen bonding. Overall, this study implies that CHBC can be a new, viable sorbent for the removal of Sb(III) from aquatic systems aiding their safe and sustainable management.

Tailoring biochar for persulfate-based environmental catalysis: Impact of biomass feedstocks

Biochar, a carbonaceous material with engineering potential, has gained attention as an efficient catalyst in persulfate-based advanced oxidation processes (PS-AOPs). Although biomass feedstocks are known as a critical factor for the performance of biochar, the relationship between the catalytic efficiency/mechanism and the types of biomass feedstocks is still unclear. Thus, according to recent advances in experimental and theoretical researches, this paper provides a systematic review of the properties of biochar, and the relationship between catalytic performance in PS-AOPs and biomass feedstocks, where the differences in physicochemical properties (surface properties, pore structure, etc.) and activation path of different sourced biochars, are introduced. In addition, how the tailoring of biochar (such as heteroatomic doping and co-pyrolysis of biomass) affects its activation efficiency and mechanism in PS-AOPs is summarized. Finally, the suitable application scenarios or systems of different sourced biochars, appropriate methods to improve the catalytic performance of different types of biochar and the prospects and challenges for the development of biochar in PS-AOPs are proposed.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

Genetically engineered microbial remediation of soils co-contaminated by heavy metals and polycyclic aromatic hydrocarbons: Advances and ecological risk assessment

Soils contaminated with heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have been becoming a worldwide concerned environmental problem because of threatening public healthy via food chain exposure. Thus soils polluted by HMs and PAHs need to be remediated urgently. Physical and chemical remediation methods usually have some disadvantages, e.g., cost-expensiveness and incomplete removal, easily causing secondary pollution, which are hence not environmental-friendly. Conventional microbial approaches are mostly used to treat a single contaminant in soils and lack high efficiency and specificity for combined contaminants. Genetically engineered microorganisms (GEMs) have emerged as a desired requirement of higher bioremediation efficiency for soils polluted with HMs and PAHs and environmental sustainability, which can provide a more eco-friendly and cost-effective strategy in comparison with some conventional techniques. This review comments the recent advances about successful bioremediation techniques and approaches for soil contaminated with HMs and/or PAHs by GEMs, and discusses some challenges in the simultaneous removal of HMs and PAHs from soil by designing multi-functional genetic engineering microorganisms (MFGEMs), such as improvement of higher efficiency, strict environmental conditions, and possible ecological risks. Also, the modern biotechnological techniques and approaches in improving the ability of microbial enzymes to effectively degrade combined contaminants at a faster rate are introduced, such as reasonable gene editing, metabolic pathway modification, and protoplast fusion. Although MFGEMs are more potent than the native microbes and can quickly adapt to combined contaminants in soils, the ecological risk of MFGEMs needs to be evaluated under a regulatory, safety, or costs benefit-driving system in a way of stratified regulation. Nevertheless, the innovation of genetic engineering to produce MFGEMs should be inspired for the welfare of successful bioremediation for soils contaminated with HMs and PAHs but it must be supervised by the public, authorities, and laws.

Structural dependent Cr(VI) adsorption and reduction of biochar: hydrochar versus pyrochar

Hydrochar and pyrochar are two typical biochars, and possess different intrinsic structures and chemical properties as well as pollutant removal abilities. However, their structural dependent pollutant removal performances and the related mechanisms are far less studied. In this study, we systematically compared the Cr(VI) removal processes of hydrochar and pyrochar in dark and under simulated sunlight at pH 5.7 ± 0.1, aiming to clarify the structural dependent Cr(VI) removal of biochar. In dark, hydrochar could remove 19.0% of Cr(VI) only via adsorption within 8 h, less than that (23.5%) of pyrochar via both adsorption and indirect solution •O₂^- reduction pathway. Although simulated sunlight irradiation could significantly promote the Cr(VI) reduction performances of both hydrochar and pyrochar, the Cr(VI) reduction percentage (88.1%) of hydrochar via both direct surface electron reduction and indirect solution •O₂^- reduction pathways, was much higher than that (30.2%) of pyrochar only via indirect solution •O₂^- reduction pathway. This different Cr(VI) reduction pathway of hydrochar and pyrochar was arisen from their structural dependent Cr(VI) adsorption models, as revealed by ATR-FTIR characterization and DFT calculation. More phenolic -OH group on hydrochar surface provided abundant sites for Cr(VI) chemical adsorption to form a strong inner-sphere complex, favoring the interfacial electron transfer for the direct surface Cr(VI) reduction. In contrast, more micropores in pyrochar were responsible for the Cr(VI) physical adsorption via intra-particle and boundary layer diffusion, which hampered the surface Cr(VI) direct reduction because of the weak interfacial interaction between Cr(VI) and pyrochar. This study clarifies the influence of surface structure on the Cr(VI) adsorption and reduction pathways of biochar, and also provides an efficient Cr(VI) removal strategy with sunlight and hydrochar.

Synthesis and adsorption properties of gelatin-conjugated hematite (α-Fe2O3) nanoparticles for lead removal from wastewater

Gelatin-conjugated hematite nanoparticles (HT NPs) are prepared through the solid-state phase transformation in the presence of phosphate. Their adsorption capacity and kinetics are investigated for Pb removal in wastewater. The gelatin-conjugated HT NPs with a size of 4-6 nm exhibit an excellent Pb removal performance, with a high adsorption capacity of 169.49 mg g^-1 and a fast equilibrium adsorption kinetics, attributed to the large number of active sites and highly negative charge on the surface of HT NPs. Moreover, the magnetic property of HT NPs enables to selectively collect NPs in the wastewater by using a permanent magnet, leading to its high reusability.

Ultrasensitive detection of trace Hg2+ by SERS aptasensor based on dual recycling amplification in water environment

Due to the nonbiodegradability and accumulation of mercury ion, even in extremely small amount, it will cause varying degrees of harm to environment and human health. Although researchers have developed many strategies to detect and monitor trace Hg²⁺, only a few provide sensitivities of less than 1.0 pM. Surface Enhanced Raman Spectroscopy (SERS) is a common method to detect mercury ion due to its high sensitivity, rapid detection and easy operation. In this work, we report a new SERS aptasensor based on dual recycling amplification for the detection of trace mercury ion, which combines SERS with nucleic acid signal amplification through functional aptamer and elaborately designed hairpin DNA. Under the optimal experimental conditions, this SERS aptasensor exhibits excellent selectivity and high sensitivity. A linear range (0.2-125 fM) and a low detection limit (0.11 fM) are obtained. By using specific aptamers, the strategy will provide a new idea for the trace detection of toxic contaminants in water environment.

Insights into ferulic acid detoxification mechanism by using a novel adsorbent, AEPA250: The microinteraction of ferulic acid with AEPA250 and Saccharomyces cerevisiae

In this study, a novel adsorbent, Air Environment-prepared Adsorbent at 250 ℃ (AEPA₂₅₀), was used to detoxify the main fermentation inhibitor (ferulic acid) present in the alkali-pretreated hydrolysate. AEPA₂₅₀ reduced the effective concentration of ferulic acid by its adsorption, thereby decreasing the possible interaction of ferulic acid with Saccharomyces cerevisiae. The results indicated that AEPA₂₅₀ functionalized with hydroxyl, carboxyl, and amino groups under acidic conditions with higher binding energies (-45.667, -27.046, and -11.008 kcal mol^-1, respectively) and electronic cloud overlap and shorter bond distances (1.015, 1.010, and 2.094 Å, respectively) than those under the other pH conditions. These differences revealed that the electrostatic interaction dominated ferulic acid adsorption on AEPA₂₅₀. Additionally, under acidic conditions and for carboxyl group functionalized AEPA₂₅₀, energy band gap values of Eg1 were higher than those of Eg2, indicating that ferulic acid provided the π-electrons for the π-π electron donor-acceptor interactions with AEPA₂₅₀. Furthermore, ferulic acid detoxification after AEPA₂₅₀ adsorption caused the regulation of YDR316W-B and YPR137C-B genes of S. cerevisiae. These results might contribute to the development of other more efficient adsorbents and pretreatment methods and allow yeast engineering for improving the scale-up and self-sufficient production of bioethanol in the future.

Influence of electrical fields enhanced phytoremediation of multi-metal contaminated soil on soil parameters and plants uptake in different soil sections

The influence of electrical fields on phytoremediation of multi-metal (Cd, Cu, and Zn) naturally contaminated soils has been investigated based on different soil sections. After ryegrass and hybrid penisetum were sowed for 30 d, electrical fields were applied during 30 days with the switching polarity every 30 min and continuing for 16 h d^-1. After electrokinetic (EK) assisted phytoremediation process, soil electrical conductivity (EC) in anode section and available soil potassium (K) in cathode section were obviously elevated. Plants biomass in middle and cathode sections were increased in both plants, especially in middle section the overall biomass of hybrid penisetum increased by 68.8%. The influence of electrical field on the contents of heavy metals in plants was different depending on the species of plants, kind of heavy metals and soil section. For Cd, Cu, and Zn co-contaminated soils, shoot metals accumulation in middle section in both plants were improved at least about 20% (with the exception of Zn in ryegrass). Electrical fields had the most significant effect on copper absorption by ryegrass and shoot Cu accumulation were elevated 32.5% in all the section. The soil EC maybe an important factor that affected electrical fields enhanced plants growth, plant metals concentrations and remediation efficiency.

Removal of Pb(II) from contaminated waters using cellulose sulfate/chitosan aerogel: Equilibrium, kinetics, and thermodynamic studies

In this study, the cellulose sulfate/chitosan aerogel (CCA) was prepared by chitosan and sulfonated cotton, and its efficiency was assessed for lead removal from contaminated waters. The adsorbent was determined by FESEM, EDS, FTIR, and BET analysis. The batch experiments were designed by Design-Expert software. At an initial lead concentration of 300 mg L^-1, the contact time of 40 min, and the temperature of 26 °C, the maximum adsorption capacity and the removal efficiency were 137.8 mg g^-1 and 91.9%, respectively. Also, the effect of ions including cations and anions at 100 mg L^-1 was investigated, and it was found that the presence of anions does not have much effect on adsorption, but among cations, calcium and magnesium have the inhibitor effect on adsorption due to their double plosive. Adsorption isotherms were studied at different temperatures, and the kinetics of the reaction were investigated at different concentrations. Thermodynamic parameters indicated that the adsorption process was spontaneous, endothermic, and increasing irregularity at the adsorbent level. Adsorption recovery was performed five times adsorption and de-adsorption by hydrochloric acid 1 M washing and only 10% of adsorption capacity was decreased.

Understanding mechanisms in the adsorption of lead and copper ions on chili seed waste in single and multicomponent systems: a combined experimental and computational study

In the current work, a deep study to understand the adsorption phenomena occurring in single and multicomponent systems was conducted by using spectroscopic characterization, and computational tools. The experimental results showed that the adsorption capacity of chili seed is higher for Pb2+ (48 mg/g) than Cu2+ (4.1 mg/g) ions in single systems. However, the adsorption study in multicomponent systems provides important conclusions of the concentration effect of the metal ions, showing a significant antagonistic and competitive effect of both ions under equivalent concentrations of them (qPb2+ is 56% reduced) or high concentration of Pb2+ (qCu2+ is 50% reduced). Computational results correlated well with the experimental ones and evidenced all interactions proposed from spectroscopy results, accounting for the occurrence of complexation and electrostatic mechanisms between metal ions and the surface oxygenated functional groups (hydroxyl, carboxyl, and carboxylate) onto chili seed. Chemistry quantum descriptors supported the reactivity behavior of the chemical species implicated. All results evidenced that Pb2+ and Cu2+ adsorption on chili seed surface is governed by the occurrence of combined ionic exchange, π-interaction, complexation, and electrostatic attraction.

Catalyst-free activation of permanganate under visible light irradiation for sulfamethazine degradation: Experiments and theoretical calculation

In this study, visible light (VL) was adopted for permanganate (PM) activation without additional catalyst, where sulfamethazine (SMT) was selected as the probe compound. Experiment results showed that the VL/PM system can effectively degrade SMT through pseudo-first-order reaction kinetics. Influencing factors including PM dosage, solution pH, humid acid (HA) and coexisting anions (CO₃^2-, SO₄^2-, Cl^- and NO₃^-) which affect SMT photo-degradation were also examined. Pyrophosphate (PP) had an inhibitory effect on SMT degradation due to the complexation of PP with Mn (III). Electron spin resonance (ESR) spectrometry and UV-Vis spectrophotometer proved that VL can activate PM to generate ·O₂^- and Mn (III) reactive species. Furthermore, based on the active site prediction, intermediates identification and Density Functional Theory (DFT) calculation, two main degradation pathways involving SMT molecular rearrangement and cleavage of S-N bond were proposed. Moreover, the energy barriers of the two degradation pathways were also calculated. This study offers a novel approach for aqueous SMT removal and deepens our understanding of the degradation mechanism of SMT through DFT calculation, which hopes to shed light on the future development of VL/PM treatment.

Synthesis of Magnesium Modified Biochar for Removing Copper, Lead and Cadmium in Single and Binary Systems from Aqueous Solutions: Adsorption Mechanism

Biochar modification can enhance the properties associated with porosity and functional groups and has been identified as an effective way to improve adsorption capacity. Modified corncob biochars pretreated by different contents of MgCl2 are obtained through slow pyrolysis; then, this work explores the adsorption abilities towards heavy metals. After modification, biochars mainly impregnate carbon surface with Mg(OH)2 and MgO particles. The best mass ratio of magnesium (Mg)/feedback is 15% for modified biochar, and 15%Mg-BC has much higher (2.36–9.34 times) metal sorption capacity than pristine biochar. Batch adsorption experiments show that copper (Cu(II)) and lead (Pb(II)) on adsorbents follow a pseudo-second-order model and cadmium (Cd(II)) follows an intraparticle diffusion model. The adsorption isotherm of Cu(II) fits well with the Langmuir model, and Pb(II) and Cd(II) fit with the Freundlich model. In the binary system, modified biochar still effectively removes metals, but the sorption capacity of metals decreases rapidly because of competitive sorption. The main adsorption mechanisms of metals include surface precipitation, cation π-banding, complexation, and ion exchange. The results show that Mg-modified biochar may be an environmentally friendly material for reducing the water pollution of heavy metals.

Transcription profiling-guided remodeling of sulfur metabolism in synthetic bacteria for efficiently capturing heavy metals

Heavy metal contamination is becoming a global problem threatening human health. Heavy metal removal by engineered microbes by cellular adsorption and uptake is a promising strategy for treatment of heavy metal contamination. However, this strategy is confronted with limited heavy metal-capturing elements. In this study, we performed a transcription profiling-guided strategy for construction of heavy metal-capturing synthetic bacteria. Transcription profiling of a heavy metal-tolerating Cupriavidus taiwanensis strain revealed up-regulation of sulfur metabolism-related operons (e.g., iscSAU and moaEDAB) by Pb²⁺ and Cd²⁺. A synthetic Escherichia coli strain, EcSSMO, was constructed by design of a synthetic sulfur metabolism operon (SSMO) based on iscSAU/moaEDAB. Biochemical analysis and X-ray photoelectron spectroscopy (XPS) revealed that the synthetic bacteria had remodeled sulfur metabolism and enhanced heavy metal-tolerating capacity, with higher surviving EcSSMO cells than the surviving control cells Ec0 (not containing SSMO) at 50 mg/L of Pb²⁺ and Cd²⁺ (>92 % versus <10 %). Moreover, EcSSMO exhibited much higher heavy metal-capturing capacity than Ec0, removing>90 % of Pb²⁺ and Cd²⁺ at 5 mg/L of Pb²⁺ and Cd²⁺, and >40 % of both heavy metals even at 50 mg/L of Pb²⁺ and Cd²⁺. This study reveals emphasizes feasibility of transcription profiling-guided construction of synthetic organisms by large-scale remodeling metabolic network.

EDTAD-modified cassava stalks loaded with Fe3O4: highly efficient removal of Pb2+ and Zn2+ from aqueous solution

In this study, a novel magnetic cassava stalk composite (M-EMCS) was prepared through modification with ethylenediamine tetraacetic anhydride (EDTAD) and loading of Fe₃O₄. The surface morphology, molecular structure, and magnetic characteristics of the composite were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), vibrating-sample magnetometer (VSM), and X-ray diffraction (XRD). It was shown that EDTAD and Fe₃O₄ were successfully modified and loaded in cassava straw (CS), respectively. The capacity of M-EMCS to absorb heavy metals under different influencing factors was tested by atomic absorption spectroscopy. The adsorption processes of both Pb²⁺ and Zn²⁺ were suitably described by second-order kinetic models and Langmuir models, indicating monolayer chemisorption. M-EMCS had high adsorption rates and adsorption capacities for these two metal ions. The adsorption of Pb²⁺ and Zn²⁺ reached a plateau after 10 min, and the adsorption capacity of Pb²⁺ (163.93 mg/g) was higher than that of Zn²⁺ (84.74 mg/g). Thermodynamic analysis showed that the adsorption of two metals by M-EMCS was spontaneous, endothermic, and irreversible. XPS analysis showed that M-EMCS mainly removes Pb²⁺ and Zn²⁺ through ion exchange, chelation, and redox. Graphical abstract.

A new insight on enhanced Pb(II) removal by sludge biochar catalyst coupling with ultrasound irradiation and its synergism with phenol removal

The applicability of sludge biochar catalyst (SBC) coupling with ultrasound (US) irradiation for the simultaneous removal of Pb(II) and phenol was firstly investigated in this study. Results indicate that Pb(II) removal of SBC/US process was superior to that of SBC without US. The inhibitory order of the coexisting anions on Pb(II) removal was PO43- > HCO3- > NO3- > F- > SO42- > Cl-. Also, several coexisting metals ions inculding Cr(VI), Ni(II) and Cu(II) could be removed in a simultaneous manner with Pb(II). A high removal performance of Pb(II) by SBC/US process and its synergism with phenol oxidation had been successfully achieved. The simultaneous removal efficiencies of Pb(II) and phenol were high up to 95% within 60 min at optimum reaction conditions. Four kinds of Pb species inculding Pb0, PbCO3, PbO and Pb(OH)2 were formed during the reaction, whereas five kinds of transformation compounds of phenol such as 1,4-benzoquinone, acetic acid, formic acid, maleic acid and propionic acid were detected. Both HO and O2- contributed to the oxidation of phenol by SBC/US process, but HO was dominant radical. A reaction mechanism for the synergistic removal of Pb(II) and phenol by SBC/US process involving in four stages-namely adsorption, precipitation, reduction and Fenton-like oxidation processes was proposed. This study demonstrates that SBC/US process could be considered as a potential candidate for the remediation of real wastewaters containing Pb(II) and phenol.

Modification on biochars for applications: A research update

Biochars are the solid product of biomass under pyrolysis or gasification treatment, whose wholesale prices are lower than commercial activated carbons and other fine materials now in use. The employment of biochars as a renewable resource for field applications, if feasible, would gain apparent economic niche. Modification using physical or chemical protocol to revise the surface properties of biochar for reaching enhanced performances of target application has attracted great research interests. This article provided an overview of biochar application, particularly with the respect to the use of modified biochar as preferred soil amendment, adsorbent, electrochemical material, anaerobic digestion promotor, and catalyst. Based on literature works the current research trends and the prospects and research needs were outlined.

Synthesis of CeO2 hollow microspheres with oxidase-like activity and their application in the catalytic degradation of p-nitrophenol

CeO₂ materials have received wide attention given their oxidase-like activity without the need for an unstable oxide substrate in the catalytic process. Nevertheless, their application and mechanism in the catalytic oxidation of refractory organic pollutants needs further study. Herein, CeO₂ hollow microspheres (HMS) with an intrinsic oxidase-like activity were synthesised via a template-free hydrothermal method and their effectiveness in degrading p-nitrophenol(p-NP) was investigated. HMS showed a maximum p-NP degradation rate of 76.5% at a CeO₂ dosage of 40 mg, 2 h reactive time, at 30°C and pH of 4.8 when the concentration of p-NP was 20 mg L^-1. The catalytic activity of CeO₂ HMS also exhibited good thermal stability and reusability. These results provide strong evidence that CeO₂ HMS can be utilised as an oxidase mimetic for the efficient catalytic degradation of refractory organic pollutants. A possible mechanism for the degradation of p-NP is also discussed.

Peroxymonosulfate-enhanced photocatalysis by carbonyl-modified g-C3N4 for effective degradation of the tetracycline hydrochloride

In this work, carbonyl-modified g-C₃N₄ (CO-C₃N₄) is prepared through one-step calcination of the melamine-oxalic acid aggregates. The visible light-assisted photocatalytic degradation efficiency of the tetracycline hydrochloride (TCH) for CO-C₃N₄ is significantly enhanced by introducing the peroxymonosulfate (PMS), and the apparent rate constant is greatly increased from 0.01966 min^-1 in CO-C₃N₄/vis system to 0.07688 min^-1 in CO-C₃N₄/PMS/vis system. It is found that carbonyl for CO-C₃N₄ might offer possible reactive sites for PMS activation and collection sites of photo-generated electrons, greatly accelerating carrier's separation for PMS activation. The favorable conditions, such as the higher catalyst dosage, higher PMS amount and alkaline pH, contribute to TCH degradation. The deleterious effects of co-existing anions on the TCH degradation efficiency are ranked in a decline: H₂PO₄^- > SO₄^2- > HCO₃^- > NO₃^- > Cl^-, and it may be affected by the type and amounts of anions and active radicals generated. The radical trapping tests and electron spin resonance (ESR) detection display that the O₂^-, h⁺, ¹O₂, OH and SO₄^- all contribute to TCH degradation. Meanwhile, possible degradation mechanism, intermediates and degradation pathway of TCH are revealed in CO-C₃N₄/PMS/vis system. This study will offer a new insight for constructing PMS activation with carbonyl modified g-C₃N₄ photocatalysis system to achieve effective treatment of organic wastewater.

Influence of inoculum variation and nutrient availability on polyhydroxybutyrate production from activated sludge

Carbon recovery through polyhydroxybutyrate (PHB) production can create a value-added waste management system. Activated sludge as inoculum enables PHB production using cheap and renewable carbons source, bringing PHB at par to conventional plastics. The PHB accumulating potential of activated sludge needs to be improved to realize the objective. The interaction between the origin of activated sludge, petroleum refinery sludge and brewery sludge, and nitrogen availability was explored to effect culture enrichment, improve PHB accumulation, and polymer characteristics through aerobic dynamic feeding. Consequently, nitrogen excess and limitation enrichment of both sludges produced mix microbial culture with adequate PHB storage of 7.8 ± 0.05%, 14.4 ± 0.04%, 14.4 ± 0.04%, 13.4 ± 0.02% respectively. Batch accumulation revealed higher PHB accumulation of 76.1 ± 0.03% and 71.7 ± 0.05% under nitrogen limitation for PRS and BS enriched under nitrogen excess condition compared to any other combination. The higher decomposition temperature of 285 °C, 293 °C, and a lower melting point of 168 °C, 165 °C with a higher molecular weight of 4.3x10⁵g/mol and semi-crystalline arrangement indicates the potential applications for extracted PHB. PHB production enhanced under nitrogen limited conditions with culture enriched under nitrogen excess condition. However, similar PHB storage, physiochemical property, and overlapping microbial community show an insignificant effect of sludge origin on PHB production.

Degradation of sulfamethazine by biochar-supported bimetallic oxide/persulfate system in natural water: Performance and reaction mechanism

The rapid development of aquaculture results in the increased concentrations and kinds of antibiotics in water environment, and the sharply growing antibiotic contamination has caused increasing concerns. Herein, an innovative sulfamethazine (SMT) removal approach was developed by activation of persulfate (PS) using biochar-based materials prepared by co-precipitation and pyrolysis: Fe-Mg oxide/biochar (FeMgO/BC). Experiments on the activation of PS by FeMgO/BC under different factors were carried out. The involved mechanism and degradation pathway were also studied. Notably, the SMT removal rate reached 99 % under the optimum reaction condition, while the TOC removal efficiency reached 77.9 %. PS was activated by FeMgO/BC and the dominated active radical was SO_4•^-. Fe²⁺ from FeMgO and the hydroxyl and carboxyl groups on the surface of biochar contributed to the production of SO_4•^-. The dehydrogenation, bond cracking and unsaturated bond addition process occurred in the degradation of SMT. Furthermore, FeMgO/BC exhibits excellent reusability and stability. Considering the outstanding actual water application performances and the weak biotoxicity, FeMgO/BC shows a promising potential in the removal of antibiotics under actual water conditions.

Bioremediation of toxic metals in mining site of Zamfara metropolis using resident bacteria (Pantoea agglomerans): A optimization approach

Background

Various clean-up techniques for heavy metals have been suggested and practiced for its biosorption from the contaminated or pollutant soil by using chemical and physical methods. But most of the methods are hazardous to the environment and expensive. This study was on how to determine the potential of resident bacteria in the removal of heavy metals from contaminated soils in Abare situated in Anka Local Government of Zamfara State, Nigeria. Thus, this study employed bioremediation technique for removal of heavy metals.

Results

The preparation of Culture media and Isolation of bacteria of the different contaminated soils were achieved by spread plate method. Whereas, concentrations of the heavy metals (Lead (Pb), Copper (Cu) and Iron (Fe)) were determined by Atomic absorption spectrophotometer (AAS. Pantoea agglomerans was used for biosorption experiment. The concentrations of Pb ranged between 1.328 ± 0.493 to 2.326 ± 2.093 mg/L, Cu 0.234 ± 0.117 to 1.054 ± 1.486 mg/L and Fe 18.498 ± 11.462 to 27.754 ± 57.510 mg/L. The optimum temperature for biosorption condition was found to be 35 °C. More so, the optimum pH of (7) was observed for maximum biosorption of Pb and Cu ions by Pantoea agglomerans which may be attributed to homeostatic phenomenon and the availability of metal binding sites on the biosorbents. Metal uptake biosorption percentage revealed that Pantoea agglomerans absorbed 99.6% of Pb, 60% of Cu and 96% of Fe.

Conclusion

This study revealed that Pantoea agglomerans potential for bioremediation of the three metals.

Gentle remediation options for soil with mixed chromium (VI) and lindane pollution: biostimulation, bioaugmentation, phytoremediation and vermiremediation

Gentle Remediation Options (GROs), such as biostimulation, bioaugmentation, phytoremediation and vermiremediation, are cost-effective and environmentally-friendly solutions for soils simultaneously polluted with organic and inorganic compounds. This study assessed the individual and combined effectiveness of GROs in recovering the health of a soil artificially polluted with hexavalent chromium [Cr(VI)] and lindane. A greenhouse experiment was performed using organically-amended vs. non-amended mixed polluted soils. All soils received the following treatments: (i) no treatment; (ii) bioaugmentation with an actinobacteria consortium; (iii) vermiremediation with Eisenia fetida; (iv) phytoremediation with Brassica napus; (v) bioaugmentation + vermiremediation; (vi) bioaugmentation + phytoremediation; and (vii) bioaugmentation + vermiremediation + phytoremediation. Soil health recovery was determined based on Cr(VI) and lindane concentrations, microbial properties and toxicity bioassays with plants and worms. Cr(VI) pollution caused high toxicity, but some GROs were able to partly recover soil health: (i) the organic amendment decreased Cr(VI) concentrations, alleviating toxicity; (ii) the actinobacteria consortium was effective at removing both Cr(VI) and lindane; (iii) B. napus and E. fetida had a positive effect on the removal of pollutants and improved microbial properties. The combination of the organic amendment, B. napus, E. fetida and the actinobacteria consortium was the most effective strategy.

Synergistic effect of Ficus-zero valent iron supported on adsorbents and Plantago major for chlorpyrifos phytoremediation from water

Chlorpyrifos and the metabolite 3, 5, 6-trichloro-2-pyridinol (TCP) are widespread contamination of aquatic environments especially freshwater fish. The objectives of this study were to evaluate the contribution of using Ficus zero-valent iron nanoparticles supported on adsorbents (F-Fe⁰ ad) as green nanotechnology and Plantago major as phytoremediation for removing chlorpyrifos and degradation product TCP polluted water. The shapes of F-Fe⁰ were circular, with sizes from 2.46 nm to 11.49 nm. Wheat bran (WB) showed the highest extent of removal of chlorpyrifos, while Rice straw ash (RSA) showed the lowest extent of removal. F-Fe⁰ supported on adsorbents has demonstrated faster removal toward chlorpyrifos compared with tested adsorbents or F-Fe⁰. Chlorpyrifos was removed more quickly and effectively by P. major L. plus F-Fe⁰ supported on different adsorbents (nearly 100%) than that by P. major (43.76%) or F-Fe⁰ (81.69%). The degradation product TCP was more greatly accumulated in water treated with F-Fe⁰ than that P. major alone or F-Fe⁰ supported with adsorbents and combined with P. major. Furthermore, TCP significantly accumulated in P. major roots and leaves in the water treated with F-Fe⁰ supported with adsorbents plus P. major more than that in the P. major roots and leaves alone, this is attributed to the role of F-Fe⁰ adsorbents for the degradation of chlorpyrifos to TCP, Which strongly accumulated in the P. major roots and leaves. It can be concluded that the contribution of using F-Fe⁰ supported on adsorbents, especially WB as green nanotechnology and P. major as phytoremediation would be a major role for the complete removal of chlorpyrifos from the water with a significant reduction in the toxic degradation product TCP.

Chromium-catechin complex, synthesis and toxicity check using bacterial models

Chromium-catechin complex was synthesized by reacting [Cr(H2O)6]2+ (hexa-aqua) with catechin as a ligand. Toxicity studies were carried out for the complex using bacterial models for safer application of this complex in the future as a drug. Chromium-catechin complex was characterized using ESI Mass spectrometry, electronic spectroscopy, FT-IR spectroscopy and cyclic voltammetry. The complex was found mildly inhibitory towards B. subtilis with the mode of action being oxidative damage, targeting cell membrane. The complex was supportive towards E. coli, which was evident from the growth profile and inhibition studies. SEM analysis supported the results of membrane integrity studies, where the bacterial liposomes upon treatment with the complex revealed slight morphological changes in the case of B. subtilis, without any change in the case of E. coli. The toxicity studies on chromium-catechin complex using bacterial model saves time, as well as resources by providing quick and reliable results, which could ease up the work to be done in future with higher group of organisms like animal model. Therefore, in the future, this complex can be used as an antidiabetic drug after performing toxicity studies with animal model.