A facile foaming-polymerization strategy to prepare 3D MnO2 modified biochar-based porous hydrogels for efficient removal of Cd(II) and Pb(II)

Biomimetic mineralization of hydrated magnesium carbonate for hydrogel reinforcement and heavy metal adsorption

With excessive Mn(Ⅱ) and Cu(Ⅱ) pollution in aquatic environments posing potential health risks to inhabitants, the emergence of carbon capture, utilization and storage (CCUS) technology has promoted the improvement of heavy metal remediation technologies. Using hydrothermal sediment as a crystal seed, rhamnolipid was used to mediate biomimetic mineralization to prepare hydrated magnesium carbonate (HMC) composites to enhance the Mn(Ⅱ)/Cu(Ⅱ) adsorption performance of alginate hydrogels. Hydrothermal sediment is beneficial for accelerating biomimetic mineralization, while rhamnolipid can induce a crystalline phase transformation from dypingite to nesquehonite. The addition of sediment significantly enhanced the compressive mechanical properties and thermal stability of the hydrogels. The adsorption performances of the nesquehonite and dypingite hydrogels were better for Mn(II) and Cu(II), respectively. An increase in the amount of sediment improved the adsorption of Cu(II) by the hydrogels appropriately, resulting in stronger selectivity for Cu(II). The adsorption of Mn(II) and Cu(II) on the hydrogel beads was thermodynamically spontaneous. The inhibitory effects of sodium dodecyl benzene sulfonate (SDBS), fulvic acid (FA) and alginate on Cu(II) adsorption were more obvious than those of bovine serum albumin (BSA). Both the complexation of functional groups on alginate and mineralization by HMC participated in the adsorption of Mn(II) and Cu(II).

Synthesis of ion exchange film based on chemical grafting of styrene onto polyethylene/EPDM rubber blend for thorium removal

Chemical grafting of low-density polyethylene film blended with ethylene propylene diene monomer rubber (PE/EPDM) using styrene monomer followed by a sulfonation process was investigated. Different factors affecting the grafting process, such as monomer and initiator concentrations, time of reaction, and grafting temperature, were studied. Sulfonation of the grafted films was carried out using chlorosulfonic acid in dichloromethane. Characterization of the grafted and sulfonated films was performed using ATR-FTIR, SEM, TGA, and XRD instruments. The grafting was successfully performed in aqueous media using sodium bisulfite as initiator, reaching a grafting yield of 130% and an ion exchange capacity of 1.2 meq/g. The removal of thorium ions from aqueous solution was studied using the obtained ion exchange films. The results showed that the maximum adsorption capacity of Th(IV) was 177.5 mg. g-1 (pH = 3, 298 K and 60 min). Removal isotherm and Kinetics were investigated, and the results revealed that the adsorption process was chemisorption homogeneous monolayer adsorption, exothermic, and spontaneous.

Adsorptive removal of phosphate from water with biochar from acacia tree modified with iron and magnesium oxides

A novel biochar (BC) from Acacia tortilis trees pruning waste was synthesized and tested for the removal of phosphate from aqueous solutions. The BC was prepared by calcination at 600 °C and doped with Fe3O4 and MgO by hydrothermal process. The presence of iron and magnesium ions in the modified BC was confirmed by EDS analysis and X-ray diffraction (XRD) methods. Both unmodified and doped BCs were tested for phosphate removal from synthetic 1-500 ppm aqueous solutions. While the unmodified BC did not show any significant removal of phosphate from aqueous solutions, the modified BC almost completely removed phosphate from water. The enhancement in removal efficiency is due to an increase in the overall surface charge and surface area of BC as a result of doping with Fe3O4 and MgO salts. The average porosity and BET surface area corresponding to the plain BC increased by more than 20% from 322 to 394 m2/g after modification by impregnation with iron oxide and magnesium oxide. The modificaiton of BC with Fe3O4 and MgO nanoparticles was observed to increase the point of zero electric charge (PZC) from pH 3.4 (corresponding to plain BC) to pH 5.3 (corresponding to modified BC). The adsorption process was very fast and a phosphate removal value of 82.5% was reached only after 30 min of adsorption, while the removal efficiency after 4 h of adsorption was 97.5%. The rapid removal efficiency in short contact time is attributed to the high surface area of BC and strong bonding between the modified BC surface and PO43- ions. The highest adsorption capacity was observed to correspond to 98.5 mg/g which was achieved at PO43- concentration of 500 ppm and pH 8.5. Moreover, after fitting the adsorption data onto four of the most widely used adsorption isotherm models, the adsorption of PO43- onto BC can be better described by the Langmuir isotherm model.

Unveiling biochar potential to promote safe crop production in toxic metal(loid) contaminated soil: A meta-analysis

Biochar application emerges as a promising and sustainable solution for the remediation of soils contaminated with potentially toxic metal(loid)s (PTMs), yet its potential to reduce PTM accumulation in crops remains to be fully elucidated. In our study, a hierarchical meta-analysis based on 276 research articles was conducted to quantify the effects of biochar application on crop growth and PTM accumulation. Meanwhile, a machine learning approach was developed to identify the major contributing features. Our findings revealed that biochar application significantly enhanced crop growth, and reduced PTM concentrations in crop tissues, showing a decrease trend of grains (36.1%, 33.6 to 38.6%) > shoots (31.1%, 29.3 to 32.8%) > roots (27.5%, 25.7 to 29.2%). Furthermore, biochar modifications were found to amplify its remediation potential in PTM-contaminated soils. Biochar application was observed to provide favorable conditions for reducing PTM uptake by crops, primarily through decreasing available PTM concentrations and improving overall soil quality. Employing machine learning techniques, we identified biochar properties, such as surface area and C content as a key factor in decreasing PTM bioavailability in soil-crop systems. Furthermore, our study indicated that biochar application could reduce probabilistic health risks associated with of the presence of PTMs in crop grains, thereby contributing to human health protection. These findings highlighted the essential role of biochar in remediating PTM-contaminated lands and offered guidelines for enhancing safe crop production.

Manganese dioxide decorated kiwi peel powder for efficient removal of lead from aqueous solutions, blood and Traditional Chinese Medicine extracts

For human health and environment safety, it is of great significance to develop novel materials with high effectiveness for removal of lead from not only aqueous solutions but also human body and traditional Chinese medicines. Here, functional kiwi peel composite, manganese dioxide decorated kiwi peel powder (MKPP), is proposed for the removal of Pb2+ effectively. The adsorption of Pb2+ in aqueous solution is a highly selective and endothermic process and kinetically follows a pseudo-second-order model, which can reach equilibrium with the capacity of 192.7 mg/g within 10 min. Comprehensive factors of hydration energy, charge-to-radius ratio and softness of Pb2+ make a stronger affinity between MKPP and Pb2+. The possible adsorption mechanism involves covalent bond, electrostatic force and chelation, etc. MKPP can be efficiently regenerated and reused with high adsorption efficiency after five cycles. Besides, MKPP can remove over 97% of Pb2+ from real water samples. MKPP can also alleviate lead poisoning to a certain extent and make the Pb level of TCM extract meet the safety standard. This work highlights that MKPP is a promising adsorbent for the removal of Pb2+ and provides an efficient strategy for reusing kiwi peel as well as dealing with the problem of Pb pollution.

Heavy metals immobilization and bioavailability in multi-metal contaminated soil under ryegrass cultivation as affected by ZnO and MnO2 nanoparticle-modified biochar

Pollution by heavy metals (HMs) has become a global problem for agriculture and the environment. In this study, the effects of pristine biochar and biochar modified with manganese dioxide (BC@MnO2) and zinc oxide (BC@ZnO) nanoparticles on the immobilization and bioavailability of Pb, Cd, Zn, and Ni in soil under ryegrass (Lolium perenne L.) cultivation were investigated. The results of SEM-EDX, FTIR, and XRD showed that ZnO and MnO2 nanoparticles were successfully loaded onto biochar. The results showed that BC, BC@MnO2 and BC@ZnO treatments significantly increased shoots and roots dry weight of ryegrass compared to the control. The maximum dry weight of root and shoot (1.365 g pot-1 and 4.163 g pot-1, respectively) was reached at 1% BC@MnO2. The HMs uptake by ryegrass roots and shoots decreased significantly after addition of amendments. The lowest Pb, Cd, Zn and Ni uptake in the plant shoot (13.176, 24.92, 32.407, and 53.88 µg pot-1, respectively) was obtained in the 1% BC@MnO2 treatment. Modified biochar was more successful in reducing HMs uptake by ryegrass and improving plant growth than pristine biochar and can therefore be used as an efficient and cost effective amendment for the remediation of HMs contaminated soils. The lowest HMs translocation (TF) and bioconcentration factors were related to the 1% BC@MnO2 treatment. Therefore, BC@MnO2 was the most successful treatment for HMs immobilization in soil. Also, a comparison of the TF values of plant showed that ryegrass had a good ability to accumulate all studied HMs in its roots, and it is a suitable plant for HMs phytostabilization.

Highly efficient and selective removal of anionic dyes from aqueous solutions using polyacrylamide/peach gum polysaccharide/attapulgite composite hydrogels with positively charged hybrid network

To avoid the weakness (lower adsorption rate and selectivity) of peach gum polysaccharide (PGP) and improve the adsorption performance of polyacrylamide (PAAm) hydrogel (lower adsorption capacity), in the present work, the PGP was chemically tailored to afford ammoniated PGP (APGP) and quaternized PGP (QPGP), and attapulgite (ATP) was bi-functionalized with cation groups and carbon‑carbon double bond. Then, PAAm/APGP and PAAm/QPGP/ATP hydrogels were synthesized via redox polymerization. The synthesis procedure and properties of hydrogels were traced by FTIR, SEM, XPS, TGA, TEM, and BET methods, and the dye adsorption performance of the hydrogels was evaluated using the new coccine (NC) and tartrazine (TTZ) aqueous solutions as the model anionic dyes. Effects of initial dye concentration, pH, and ionic strength on the adsorption were investigated. Compared with PAAm/APGP hydrogel, PAAm/APGP/ATP hydrogel exhibits higher adsorption rate, superior adsorption capacity, stability, and selectivity towards anionic dye. The adsorption process of PAAm/QPGP/ATP hydrogel reached equilibrium in about 20 min and followed the pseudo-second-order kinetic model and Langmuir isotherm. The adsorption capacities towards NC and TTZ of PAAm/QPGP/ATP hydrogel were calculated as 873.235 and 731.432 mg/g. This hydrogel adsorbent originating from PAAm, PGP, and ATP shows great promise for application in practical water treatment.

Birnessite-Type MnO2 Modified Sustainable Biomass Fiber toward Adsorption Removal Heavy Metal Ion from Actual River Aquatic Environment

In this work, a novel birnessite-type MnO2 modified corn husk sustainable biomass fiber (MnO2@CHF) adsorbent was fabricated for efficient cadmium (Cd) removal from aquatic environments. MnO2@CHF was designed from KMnO4 hydrothermally treated with corn husk fibers. Various characterization revealed that MnO2@CHF possessed the hierarchical structure nanosheets, large specific surface area, and multiple oxygen-containing functional groups. Batch adsorption experimental results indicated that the highest Cd (II) removal rate could be obtained at the optimal conditions of adsorbent amount of 0.200 g/L, adsorption time of 600 min, pH 6.00, and temperature of 40.0 °C. Adsorption isotherm and kinetics results showed that Cd (II) adsorption behavior on MnO2@CHF was a monolayer adsorption process and dominated by chemisorption and intraparticle diffusion. The optimum adsorption capacity (Langmuir model) of Cd (II) on MnO2@CHF was 23.0 mg/g, which was higher than those of other reported common biomass adsorbent materials. Further investigation indicated that the adsorption of Cd (II) on MnO2@CHF involved mainly ion exchange, surface complexation, redox reaction, and electrostatic attraction. Moreover, the maximum Cd (II) removal rate on MnO2@CHF from natural river samples (Xicheng Canal) could reach 59.2% during the first cycle test. This study showed that MnO2@CHF was an ideal candidate in Cd (II) practical application treatment, providing references for resource utilization of agricultural wastes for heavy metal removal.

Enhanced ozonation of vanillin catalyzed by highly efficient magnetic MnFe2O4/ZIF-67 catalysts: Synergistic effects and mechanism insights

In this study, we synthesized magnetic MnFe2O4/ZIF-67 composite catalysts using a straightforward method, yielding catalysts that exhibited outstanding performance in catalyzing the ozonation of vanillin. This exceptional catalytic efficiency arose from the synergistic interplay between MnFe2O4 and ZIF-67. Comprehensive characterization via x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), Fourier transform infrared spectrometer (FT-IR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM), and energy dispersive spectroscopy (EDS) confirmed that the incorporation of MnFe2O4 promoted the creation of oxygen vacancies, resulting in an increased presence of l adsorbed oxygen (Oads) and the generation of additional ·OH groups on the catalyst surface. Utilizing ZIF-67 as the carrier markedly enhanced the specific surface area of the catalyst, augmenting the exposure of active sites, thus improving the degradation efficiency and reducing the energy consumption. The effects of different experimental parameters (catalyst type, initial vanillin concentration, ozone dosage, initial pH value, and catalyst dosage) were also investigated, and the optimal experimental parameters (300 mg/L1.0-MnFe2O4/ZIF-67, vanillin concentration = 250 mg/L, O3 concentration = 12 mg/min, pH = 7) were obtained. The vanillin removal efficiency of MnFe2O4/ZIF-67 was increased from 74.95% to 99.54% after 30 min of reaction, and the magnetic separation of MnFe2O4/ZIF-67 was easy to be recycled and stable, and the vanillin removal efficiency of MnFe2O4/ZIF-67 was only decreased by about 8.92% after 5 cycles. Additionally, we delved into the synergistic effects and catalytic mechanism of the catalysts through kinetic fitting, reactive oxygen quenching experiments, and electron transfer analysis. This multifaceted approach provides a comprehensive understanding of the enhanced ozonation process catalyzed by MnFe2O4/ZIF-67 composite catalysts, shedding light on their potential applications in advanced oxidation processes. PRACTITIONER POINTS: A stable and recyclable magnetic composite MnFe2O4/ZIF-67 catalyst was synthesized through a simple method. The synergistic effect and catalytic mechanism of the MnFe2O4/ZIF-67 catalyst were comprehensively analyzed and discussed. A kinetic model for the catalytic ozone oxidation of vanillin was introduced, providing valuable insights into the reaction dynamics.

The Cd immobilization mechanisms in paddy soil through ureolysis-based microbial induced carbonate precipitation: Emphasis on the coexisting cations and metatranscriptome analysis

Microbial induced carbonate precipitation (MICP) can immobilize metals and reduce their bioavailability. However, little is known about the immobilization mechanism of Cd in the presence of soil cations and the triggered gene expression and metabolic pathways in paddy soil. Thus, microcosmic experiments were conducted to study the fractionation transformation of Cd and metatranscriptome analysis. Results showed that bioavailable Cd decreased from 0.62 to 0.29 mg/kg after 330 d due to the MICP immobilization. This was ascribed to the increase in carbonate bound, Fe-Mn oxides bound, and residual Cd. The underlying immobilization mechanisms could be attributed to the formation of insoluble Cd-containing precipitates, the complexation and lattice substitution with carbonate and Fe, Mn and Al (hydr)oxides, and the adsorption on functional group on extracellular polymers of cell. During the MICP immobilization process, up-regulated differential expression urease genes were significantly enriched in the paddy soil, corresponding to the arginine biosynthesis, purine metabolism and atrazine degradation. The metabolic pathway of bacterial chemotaxis, flagellum assembly, and peptidoglycan biosynthesis and the expression of cadA gene related to Cd excretion enhanced Cd resistance of soil microbiome. Therefore, this study provided new insights into the immobilization mechanisms of Cd in paddy soils through ureolysis-based MICP process.

Conversion of carbon black recovered from waste tires into activated carbon via chemical/microwave methods for efficient removal of heavy metal ions from wastewater

In this research study, recovered carbon black (rCB) was obtained via pyrolysis of waste tires. The obtained rCB was then converted into activated carbon species through both chemical treatment and microwave coupled with chemical treatment as a two-step activation process. The activated carbon obtained from chemical activation was denoted as C-AC, while that obtained from exposure to microwave followed by chemical activation was labeled as MC-AC. These two structures were consequently introduced as sorbents for the removal of cadmium ions from an aqueous solution. The structural characteristics of the introduced adsorbents were confirmed using various techniques, namely X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy. Additionally, textual features of these adsorbents were acquired via both scanning electron microscopy (SEM) and N2 adsorption-desorption BET surface area analyses. These two structures were then introduced for Cd ion adsorption under different operating conditions. Particularly, the effect of pH, contact time, adsorbent dose, and metal ion concentration on the efficiency of adsorption was investigated. The 1maximum adsorption capacity was detected at a pH value of 5.0, a contact time of 30 min, a sorbent dose of 0.4 g L-1, and an initial metal concentration of 50 mg L-1 using MC-AC, which exhibited nearly double the sorption capacity detected for C-AC. Kinetic studies indicated that the process of Cd(ii) adsorption is perfectly described and fitted by the pseudo-second-order model. However, adsorption isotherms for the two adsorbents were found to match the Langmuir model, referring to the occurrence of uniform monolayer adsorption for the metal ions. Thermodynamic analysis demonstrated that the adsorption process was spontaneous and endothermic.

Capacitive removal of Pb ions via electrosorption on novel willow biochar-manganese dioxide composites

Biochar derived from lignocellulosic biomass has been used as a low-cost adsorbent in wastewater treatment applications. Due to its rich porous structure and good electrical conductivity, biochar can be used as a cost-effective electrode material for capacitive deionization of water. In this work, willow biochar was prepared through carbonization of shrub willow chips, activated with potassium hydroxide, and loaded with manganese dioxide (WBC-K-MnO2 nanocomposite). The prepared materials were used to electrochemically adsorb Pb2+ from aqueous solutions. Under the applied potential of 1.0 V, the WBC-K-MnO2 electrode exhibited a high Pb2+ specific electrosorption capacity (23.3 mg/g) as compared to raw willow biochar (4.0 mg/g) and activated willow biochar (9.2 mg/g). KOH activation followed by MnO2 loading on the surface of raw biochar enhanced its BET surface area (178.7 m2/g) and mesoporous volume ratio (42.1%). Moreover, the WBC-K-MnO2 nanocomposite exhibited the highest specific capacitance value of 234.3 F/g at a scan rate of 5 mV/s. The electrosorption isotherms and kinetic data were well explained by the Freundlich and pseudo-second order models, respectively. The WBC-K-MnO2 electrode demonstrated excellent reusability with a Pb2+ electrosorption efficiency of 76.3% after 15 cycles. Thus, the WBC-K-MnO2 nanocomposite can serve as a promising candidate for capacitive deionization of heavy metal contaminated water.

A critical review of sustainable application of biochar for green remediation: Research uncertainty and future directions

Biochar, a carbon-rich material produced from the pyrolysis of organic biomass, has gained significant attention as a potential solution for sustainable green remediation practices. Several studies analyze biomass-derived biochar techniques and environmental applications, but comprehensive assessments of biochar limitations, uncertainty, and future research directions still need to be improved. This critical review aims to present a comprehensive analysis of biochar's efficacy in environmental applications, including soil, water, and air, by sequentially addressing its preparation, application, and associated challenges. The review begins by delving into the diverse methods of biochar production, highlighting their influence on physical and chemical properties. This review explores the diverse applications of biochar in remediating contaminated soil, water, and air while emphasizing its sustainability and eco-friendly characteristics. The focus is on incorporating biochar as a remediation technique for pollutant removal, sequestration, and soil improvement. The review highlights the promising results obtained from laboratory-scale experiments, field trials, and case studies, showcasing the effectiveness of biochar in mitigating contaminants and restoring ecosystems. The environmental benefits and challenges of biochar production, characterization, and application techniques are critically discussed. The potential synergistic effects of combining biochar with other remediation methods are also explored to enhance its efficacy. A rigorous analysis of the benefits and drawbacks of biochar for diverse environmental applications in terms of technical, environmental, economic, and social issues is required to support the commercialization of biochar for large-scale uses. Finally, future research directions and recommendations are presented to facilitate the development and implementation of biochar-based, sustainable green remediation strategies.

Recent advances in the synthesis and application of magnetic biochar for wastewater treatment

Magnetic biochar (MBC) is a novel bio-carbon material with both desired properties as adsorbent and magnetic characteristics. This review provides an up-to-date summary and discussion on the latest development of MBC, which covers the progress on its synthesis, application, and techno-economic analysis. The review indicates that the direct hydrothermal synthesis has been catching more research attention to produce MBC due to its mild reaction conditions. Instead of the Fe-loaded MBC, there is a trend of using Mn for the magnetization. For the MBC application, how to improve its adsorption performance for water decontamination, ideally to match that of the biochar (BC) or activated carbon, is important. In addition, more studies on the environmental impacts of MBC and life-cycle assessment decoding the process optimization options are necessary. This review will provide valuable references for the development of MBC and MBC-based materials for wastewater treatment.

A Polyelectrolyte Colloidal Brush Based on Cellulose: Perspectives for Future Applications

This feature article is devoted to the evaluation of different techniques for producing colloidal polyelectrolyte brushes (CPEBs) based on cellulose nanofibers modified with grafted polyacrylates. The paper also reviews the potential applications of these CPEBs in designing electrode materials and as reinforcing additives. Additionally, we discuss our own perspectives on investigating composites with CPEBs. Herein, polyacrylic acid (PAA) was grafted onto the surface of cellulose nanofibers (CNFs) employing a "grafting from" approach. The effect of the PAA shell on the morphological structure of a composite with polypyrrole (PPy) was investigated. The performance of as-obtained CNF-PAA/PPy as organic electrode material for supercapacitors was examined. Furthermore, this research highlights the ability of CNF-PAA filler to act as an additional crosslinker forming a physical sub-network due to the hydrogen bond interaction inside chemically crosslinked polyacrylamide (PAAm) hydrogels. The enhancement of the mechanical properties of the material with a concomitant decrease in its swelling ratio compared to a pristine PAAm hydrogel was observed. The findings were compared with the recent theoretical foundation pertaining to other similar materials.

Efficient Adsorption and Electrochemical Detection of Cd2+ with a Ternary MgZnFe-Layered Double Hydroxides Engineered Porous Biochar Composite

Their unique layered structure, large specific surface area, good stability, high negative charge density between layers, and customizable composition give layered double hydroxides (LDHs) excellent adsorption and detection performance for heavy metal ions (HMIs). However, their easy aggregation and low electrical conductivity limit the practical application of untreated LDHs. In this work, a ternary MgZnFe-LDHs engineered porous biochar (MgZnFe-LDHs/PBC) heterojunction was proposed as a sensing and adsorption material for the effective detection and removal of Cd2+ from wastewater. The growth of MgZnFe-LDHs in the PBC pores not only reduces the accumulation of MgZnFe-LDHs, but also improves the electrical conductivity of the composite. The synergistic effect between MgZnFe-LDHs and PBC enables the composite to achieve a maximum adsorption capacity of up to 293.4 mg/g for Cd2+ in wastewater. Meanwhile, the MgZnFe-LDHs/PBC-based electrochemical sensor shows excellent detection performance for Cd2+, presenting a wide linear range (0.01 ng/L-1 mg/L), low detection limit (3.0 pg/L), good selectivity, and stability. The results indicate that MgZnFe-LDHs/PBC would be a potential material for detecting and removing Cd2+ from wastewater.

Synthesis of fungal chitosan-polystyrene modified by nanoparticles of binary metals for the removal of heavy metals from waste aqueous media

The objective of this study was to assess the efficacy of fungal chitosan-polystyrene-Co-nanocomposites (FCPNC) as a material for the adsorptive removal of cadmium (Cd) ions from aqueous solutions. The synthesis and characterization of FCPNC were accomplished using various analytical techniques, including Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) analysis, and dynamic light scattering (DLS). The effectiveness of this adsorbent in removing Cd(ii) species from solution matrices was systematically investigated, resulting in the achievement of a maximum adsorption capacity of approximately 112.36 mg g-1. This high adsorption capacity was detected using the following operational parameters: solution pH equals 5.0, 60 min as a contact time between the adsorbent and Cd(ii) solution, Cd initial concentration of 50 ppm, adsorbent dosage of 0.5 g L-1 and room temperature. The process of cadmium adsorption by FCPNC was found to follow the Langmuir isotherm model, suggesting that a chemical reaction occurs on the biosorbent surface. Kinetic studies have demonstrated that the cadmium removal process aligns well with the pseudo-second-order model. The thermodynamic analysis revealed the following values: ΔH° = 25.89 kJ mol-1, ΔG° = -21.58 kJ mol-1, and ΔS° = 159.30 J mol-1 K-1. These values indicate that the sorption process is endothermic, spontaneous, and feasible. These findings suggest the potential of FCPNC as an exceptionally effective biosorbent for the removal of water contaminants.

A novel biochar-based composite hydrogel for removing heavy metals in water and alleviating cadmium stress in tobacco seedlings

A novel composite hydrogel (AM/CMC/B) synthesized from peanut shell biochar effectively adsorbs heavy metal Cd in water and reduces its toxicity to tobacco seedlings. The hydrogel, prepared via hydrothermal polymerization using acrylamide (AM), carboxymethyl cellulose (CMC), and peanut shell biochar (B), exhibited a maximum adsorption capacity of 164.83 mg g-1 for Cd2+ and followed a pseudo-second-order kinetic model. In pot experiments, the application of exogenous AM/CMC/B mitigated the inhibitory effects of Cd-contaminated soil on tobacco seedling growth. Addition of 10 mg kg-1 Cd resulted in improved phenotype, root system development, enhanced photosynthetic capacity, stomatal conductance (Gs), stomatal number, and increased antioxidant activity while reducing MDA content and leaf cell death. These findings highlight the potential of AM/CMC/B as an environmentally friendly adsorbent for Cd removal from water and for reducing Cd stress toxicity in tobacco and other plants.

Synergistic interplay between ABA-generating bacteria and biochar in the reduction of heavy metal accumulation in radish, pakchoi, and tomato

Heavy metal (HM) contamination is an environmental concern that threatens the agricultural product safety and human health. To address this concern, we developed a novel strategy involving the synergistic application of Azospirillum brasilense, a growth-promoting rhizobacterium which produces abscisic acid (ABA), and biochar to minimize HM accumulation in the edible parts of vegetable crops. Compared to A. brasilense or biochar alone, the concentrations of Cd, Ni, Pb, and Zn in radish (Raphanus sativus L.), pakchoi (Brassica chinensis L.), and tomato (Lycopersicon esculentum L.) decreased by 18-63% and 14-56%, respectively. Additionally, the synergistic treatment led to a 14-63% decrease in the bioconcentration factor. The biomass of the edible parts of the three crops increased by 65-278% after synergistic treatment, surpassing the effects of single treatments. Furthermore, the synergistic application enhanced the SPAD values by 1-45% compared to single treatments. The MDA concentrations in stressed plants decreased by 16-39% with the bacteria-biochar co-treatment compared to single treatments. Co-treatment also resulted in increased soluble protein and sugar concentrations by 8-174%, and improvements in flavonoids, total phenols, ascorbic acid, and DPPH levels by 2-50%. Pearson correlation analysis and structural equation modeling revealed that the synergistic effect was attributed to the enhanced growth of A. brasilense facilitated by biochar and the improved availability of HMs in soils. Notably, although ABA concentrations were not as high as those achieved with A. brasilense alone, they were maintained at relatively high levels. Overall, the synergistic application of A. brasilense-biochar might have remarkable potential for reducing the accumulation of HMs while promoting growth and improving nutritional and antioxidant qualities in tuberous, leafy, and fruit crops.

A Salt-Resistant and Antibacterial Cu2 ZnSnS4 -Based Hydrogel for High Efficient Photothermal Distillation in Seawater Desalination and Sewage Purification

Solar steam generation technology (SSGT) using unlimited solar energy is regarded as one of the most promising sustainable technologies to produce clean water. However, most of studies on SSGT simply focus on how to improve salt resistance as well as exclude inorganic and organic pollutants in targeted water, and only very limited studies pay attention to the micro-organisms in the collected water. Herein, one porous Cu2 ZnSnS4 -based photothermal hydrogel (CZTS-PH) with antibacterial properties as well as good salt resistance was successfully prepared. The CZTS-PH was measured with the water evaporation rate as high as 3.249 kg m-2  h-1 and photothermal conversion efficiency of 96.3 % under one sun irradiation. Impressively, owing to the amino groups in the skeleton, CZTS-PH can significantly deteriorate the cell membrane and lead to the death of the Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), which ensures its long-term stability photothermal conversion and the safety of clean water. Overall, the admired photothermal conversion efficiency, and the excellent salt resistance and antibacterial performance suggest that CZTS-PH could be a promising full-scale device applied in seawater desalination and water purification.

Magnetic Biochar Derived from Fenton Sludge/CMC for High-Efficiency Removal of Pb(II): Synthesis, Application, and Mechanism

Magnetic biochar composites (MBC) were developed by a simple one-step pyrolysis method using Fenton sludge waste solid and carboxymethyl cellulose sodium. Detailed morphological, chemical, and magnetic characterizations corroborate the successful fabrication of MBC. Batch adsorption experiments show that the synthesized MBC owns high-efficiency removal of Pb(II), accompanied by ease-of-separation from aqueous solution using magnetic field. The experiment shows that the equilibrium adsorption capacity of MBC for Pb(II) can reach 199.9 mg g^-1, corresponding to a removal rate of 99.9%, and the maximum adsorption capacity (q_m) reaches 570.7 mg g^-1, which is significantly better than that of the recently reported magnetic similar materials. The adsorption of Pb(II) by MBC complies with the pseudo second-order equation and Langmuir isotherm model, and the adsorption is a spontaneous, endothermic chemical process. Investigations on the adsorption mechanism show that the combination of Pb(II) with the oxygen-containing functional groups (carboxyl, hydroxyl, etc.) on biochar with a higher specific surface area are the decisive factors. The merits of reusing solid waste resource, namely excellent selectivity, easy separation, and simple preparation make the MBC a promising candidate of Pb(II) purifier.

Remediation of cadmium contaminated soil using K2FeO4 modified vinasse biochar

The remediation of cadmium (Cd) contaminated soil is challenging for agricultural practices. In this study, a novel vinasse biochar modified by potassium ferrate (K₂FeO₄) was synthesized to immobilize Cd in agricultural soil. Three biochars [i.e., vinasse biochar (BC), KMnO₄ modified vinasse biochar (MnBC), and K₂FeO₄ modified vinasse biochar (FeBC)] were applied to compare their efficiencies of Cd immobilization. The results showed that the orders of pH, ash content, and functional groups in different biochar were the same following BC < MnBC < FeBC. Scanning electron microscope images showed that the FeBC has more micropores than MnBC and BC. X-ray diffraction identified manganese oxides and iron oxides within MnBC and FeBC, indicating that Mn and Fe were well loaded on the biochar. In the soil-based pot experiment, both MnBC and FeBC significantly reduced soil available Cd by 23-38% and 36-45% compared with the control, respectively (p < 0.05). In addition, the application of BC, MnBC, and FeBC significantly increased the yield, chlorophyll, and vitamin C of Chinese cabbage (p < 0.05), and decreased its Cd uptake compared with the control. Notably, shoot Cd significantly reduced when 2% FeBC was applied (p < 0.05). Overall, using K₂FeO₄ to modify vinasse biochar enriched the surface functional groups and minerals as well as reduced Cd availability in soil and its uptake by the plant. Our study showed that K₂FeO₄ modified vinasse biochar could be used as an ideal amendment for the remediation of Cd-contaminated soil.

Performance and Mechanism of Functionalized Water Hyacinth Biochar for Adsorption and Removal of Benzotriazole and Lead in Water

In this paper, water hyacinth is used to prepare biochar (WBC). A biochar-aluminum-zinc-layered double hydroxide composite functional material (WL) is synthesized via a simple co-precipitation method which is used to adsorb and remove benzotriazole (BTA) and lead (Pb²⁺) in an aqueous solution. In particular, this research paper uses various characterization methods to analyze WL and to explore the adsorption performance and adsorption mechanism of WL on BTA and Pb²⁺ in an aqueous solution through batch adsorption experiments combined with model fitting and spectroscopy techniques. The results indicate that the surface of WL contains a thick sheet-like structure with many wrinkles which would provide many adsorption sites for pollutants. At room temperature (25 °C), the maximum adsorption capacities of WL on BTA and Pb²⁺ are 248.44 mg·g^-1 and 227.13 mg·g^-1, respectively. In a binary system, during the process of using WL to adsorb BTA and Pb²⁺, compared with that in the absorption on Pb²⁺, WL shows a stronger affinity in the adsorption on BTA, and BTA would thus be preferred in the absorption process. The adsorption process of WL on BTA and Pb²⁺ is spontaneous and is endothermic monolayer chemisorption. In addition, the adsorption of WL on BTA and Pb²⁺ involves many mechanisms, but the main adsorption mechanisms are different. Among them, hydrogen bonding dominates the adsorption on BTA, while functional groups (C-O and C=O) complexation dominates the adsorption on Pb²⁺. When WL adsorbs BTA and Pb²⁺, the coexistence of cations (K⁺, Na⁺, and Ca²⁺) has a strong anti-interference ability, and WL can use a lower concentration of fulvic acid (FA) (<20 mg·L^-1) to improve its adsorption performance. Last but not least, WL has a stable regenerative performance in a one-component system and a binary system, which indicates that WL has excellent potential for the remediation of BTA and Pb²⁺ in water.

High-efficiency electrochemical removal of Cd(II) from wastewater using birnessite-biochar composites: Performance and mechanism

Birnessite has been widely used for electrochemical removal of heavy metals due to its high pseudocapacitance. Incorporation of carbon-based materials into birnessite can enhance its conductivity and stability, and synergistically improve the electrochemical adsorption capacity due to the double-layer capacitor reaction derived from carbon-based materials. In this study, biochar was successfully incorporated with birnessite at various ratios to synthesize composites (BC-Mn) for effective electrochemical removal of cadmium (Cd(II)) from water. The effects of cell voltage, initial pH, and recycling performance of BC-Mn were evaluated. As a result, the electrosorption capacity of BC-Mn for Cd(II) exhibited gradual increases with increasing birnessite content and reached equilibrium at a Mn content of 20% (BC-Mn20). The Cd(II) adsorption capacity of BC-Mn20 rose at higher cell voltage, and reached the maximum at 1.2 V. At pH 3.0-6.0, the electrosorption capacity initially rose until pH 5.0 and then approached equilibrium with a further increase in pH value. The Cd(II) electrochemical adsorption capacity of BC-Mn20 in the solution could reach 104.5 mg g^-1 at pH 5.0 for 8 h at 1.2 V. Moreover, BC-Mn20 exhibited excellent reusability with a stability of 95.4% (99.7 mg g^-1) after five cycles of reuse. Due to its superior heavy metal adsorption capacity and reusability, BC-Mn20 may have a promising prospect in the remediation of heavy metal polluted water.

A review on pollutants remediation competence of nanocomposites on contaminated water

Clean freshwater has been required for drinking, sanitation, agricultural activities, and industry, as well as for the development and maintenance of the eco - systems on which all livelihoods rely. Water contamination is currently a significant concern for researchers all over the world; hence it is essential that somehow this issue is resolved as soon as possible. It is now recognised as one of the most important research areas in the world. Current wastewater treatment techniques degrade a wide range of wastewaters efficiently; however, such methods have some limitations. Recently, nanotechnology has emerged as a wonderful solution, and researchers are conducting research in this water remediation field with a variety of potential applications. The pollutants remediation capability of nanocomposites as adsorbents, photocatalysts, magnetic separation, and so on for contaminant removal from contaminated water has been examined in this study. This study has spotlighted the most significant nanocomposites invention reported to date for contaminated and effluent remediation, as well as a research gap as well as possible future perspectives.

NaHCO3 activated sludge-derived biochar by KMnO4 modification for Cd(II) removal from aqueous solutions

The surface flat pristine biochar provides limited adsorption sites for Cd(II) adsorption. To address this issue, a novel sludge-derived biochar (MNBC) was prepared by NaHCO₃ activation and KMnO₄ modification. The batch adsorption experiments illustrated that the maximum adsorption capacity of MNBC was twice that of pristine biochar and reached equilibrium more quickly. The pseudo-second order and Langmuir model were more suitable for analyzing the Cd(II) adsorption process on MNBC. Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl^- and NO^-₃ had no effect on the Cd(II) removal. Cu²⁺ and Pb²⁺ inhibited the Cd(II) removal, while PO^3-₄ and humic acid (HA) promoted it. After 5 repeated experiments, the Cd(II) removal efficiency on MNBC was 90.24%. The Cd(II) removal efficiency of MNBC in different actual water bodies was over 98%. Furthermore, MNBC owned excellent Cd(II) adsorption performance in fixed bed experiments, and the effective treatment capacity was 450 BV. The co-precipitation, complexation, ion exchange and Cd(II)-π interaction were involved in Cd(II) removal mechanism. XPS analysis showed that NaHCO₃ activation and KMnO₄ modification enhanced the complexation ability of MNBC to Cd(II). The results suggested that MNBC can be used as an effective adsorbent for treating of Cd-contaminated wastewater.

Dual redox cycles of Mn(Ⅱ)/Mn(III) and Mn(III)/Mn(IV) on porous Mn/N co-doped biochar surfaces for promoting peroxymonosulfate activation and ciprofloxacin degradation

Mn and N co-doped biochar (Mn-N-TS) was prepared as an effective catalyst to activate peroxymonosulfate (PMS) for ciprofloxacin (CIP) degradation. As opposed to Mn-TS and N-TS, Mn-N-TS had more active sites containing N and Mn, as well as a greater specific surface area (923.733 m² g^-1). The Mn-N-TS exhibited excellent PMS activation ability. In the Mn-N-TS/PMS system, the CIP removal efficiency was 91.9% in 120 min. Mn and N co-doping could accelerate electron transfer between CIP and PMS molecules. Simultaneously, defect sites, graphitic N, pyridinic N, C═O groups, and Mn(II)/Mn(III)/Mn(IV) redox cycles acted as active sites to activate PMS and generate free radicals (OH, SO₄^- and ¹O₂). Furthermore, the Mn-N-TS/PMS system could effectively degrade CIP in a wide pH range, background substances, and actual water. Finally, a probable mechanism of PMS activation by Mn-N-TS was proposed. In conclusion, this work gave a novel direction for the rational design of Mn and N co-doped biochar.

A novel BC/g-C3N4 porous hydrogel carrier used in intimately coupled photocatalysis and biodegradation system for efficient removal of tetracycline hydrochloride in water

Intimately coupled photocatalysis and biodegradation (ICPB) is a promising technology to remove refractory contaminants from water. The key to successful ICPB is a carrier capable of accumulating biofilm and adhering photocatalyst firmly. Herein, BC/g-C₃N₄ was prepared into a three dimensional porous hydrogel and used as a carrier in ICPB system for the first time. Degradation experiments revealed that the removal rate of tetracycline hydrochloride (TCH) in water by the ICPB system was 96.0% after 10 h, which was significantly higher than that by the photocatalysis (PC, 76.3%), biodegradation (B, 32.5%), adsorption (AD, 17.2%), and photolysis (P, 5.0%) systems. Photo-electrochemical tests confirmed that ICPB system had superior electron transfer ability between photocatalysts and microorganisms. The removal efficiency of COD proved that microorganisms played an important role in the mineralization process of TCH by the ICPB system. After the ICPB degradation experiment, microorganisms maintained high activity and Pseudomonas, Burkholderiaceae and Flavobacterium which had TCH degradation or electron transport ability, were enriched. In conclusion, the novel ICPB carrier overcame shortcomings of the traditional ICPB carrier and the novel ICPB system had superior degradation performance for TCH. This study provided a possible method to promote the practical application of ICPB technology.

Facile green preparation of single- and two-component modified activated carbon fibers for efficient trace heavy metals removal from drinking water

Trace heavy metals exist in drinking water, having great adverse effects on human health and making it a huge challenge to remove. Herein, novel materials have been prepared by a simple and green method using single- (polydopamine (PDA) or 2,3-dimercaptopropanesulfonic sodium (DMPS)) (PDA-OACF or DMPS-OACF) and two-component (PDA and DMPS) (DMPS-PDA-OACF) functionalized activated carbon fibers pretreated by hydrogen peroxide for the removal of trace heavy metals. The as-prepared DMPS-OACF (7.5,20) under DMPS addition of 7.5 mg and sonication time of 20 min retained large specific surface area, micro-mesoporous structure and rich functional groups and showed better adsorption performance for trace lead and mercury. It also exhibited wide applicable ranges of pH (3.50-10.50) and concentration (50-1136 μg L^-1), rapid adsorption kinetics, and excellently selective removal performance for trace lead. The maximum lead adsorption capacity reached 16.03 mg g^-1 when the effluent lead concentration met World Health Organization (WHO) standard and the adsorbent can be regenerated by EDTA solution. The fitting results of adsorption kinetics and isotherm models revealed that the lead adsorption process was multi-site adsorption on heterogeneous surfaces and chemical adsorption. The excellent adsorption properties for trace heavy metals were attributed that the sulfur/oxygen/nitrogen-containing functional groups boosted diffusion and adsorption by electrostatic attraction and coordination, suggesting that DMPS-OACF (7.5,20) has great application potential in the removal of trace heavy metals.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Efficient Remediation of Cadmium Contamination in Soil by Functionalized Biochar: Recent Advances, Challenges, and Future Prospects

Heavy metal pollution in soil seriously harms human health and animal and plant growth. Among them, cadmium pollution is one of the most serious issues. As a promising remediation material for cadmium pollution in soil, functionalized biochar has attracted wide attention in the last decade. This paper summarizes the preparation technology of biochar, the existing forms of heavy metals in soil, the remediation mechanism of biochar for remediating cadmium contamination in soil, and the factors affecting the remediation process, and discusses the latest research advances of functionalized biochar for remediating cadmium contamination in soil. Finally, the challenges encountered by the implementation of biochar for remediating Cd contamination in soil are summarized, and the prospects in this field are highlighted for its expected industrial large-scale implementation.

Removal and Mechanism of Cadmium, Lead and Copper in Water by Functional Modification of Silkworm Excrement Biochar

A new type of biochar, called GBC, was prepared from silkworm excrement, and then modified by chitosan combined with pyromellitic dianhydride. The removal of mono-metal and polymetals (Pb, Cd and Cu) from an aqueous solution by GBC was investigated in this research. Compared to unmodified biochar, the removal rate of Pb and Cd by GBC was about 12% higher, while that of Cu was about 94.6% higher. It also shows the types of functional groups in biochar have a great impact on their adsorption. The removal of Pb is mainly involved in the N-C=O functional group, the removal of Cd is mainly involved in N-containing functional group and C=C bond, and that of Cu is mainly involved in N-containing functional group, carboxyl group, hydroxyl group, and a carbonyl group. Five adsorption–desorption cycles of GBC were carried out, and it was found that the adsorption capacities of GBC for Pb, Cd and Cu decreased by 7.28%, 10.78% and 6.07%, respectively, indicating that GBC had a good renewable performance. The adsorption capacity of GBC for Cu in different water samples is between 89.62 and 93.47 mg·g⁻¹, indicating that GBC has great application potential for the removal of Cu in wastewater.

Advanced Polymeric Nanocomposites for Water Treatment Applications: A Holistic Perspective

Water pollution remains one of the greatest challenges in the modern era, and water treatment strategies have continually been improved to meet the increasing demand for safe water. In the last few decades, tremendous research has been carried out toward developing selective and efficient polymeric adsorbents and membranes. However, developing non-toxic, biocompatible, cost-effective, and efficient polymeric nanocomposites is still being explored. In polymer nanocomposites, nanofillers and/or nanoparticles are dispersed in polymeric matrices such as dendrimer, cellulose, resins, etc., to improve their mechanical, thermophysical, and physicochemical properties. Several techniques can be used to develop polymer nanocomposites, and the most prevalent methods include mixing, melt-mixing, in-situ polymerization, electrospinning, and selective laser sintering techniques. Emerging technologies for polymer nanocomposite development include selective laser sintering and microwave-assisted techniques, proffering solutions to aggregation challenges and other morphological defects. Available and emerging techniques aim to produce efficient, durable, and cost-effective polymer nanocomposites with uniform dispersion and minimal defects. Polymer nanocomposites are utilized as filtering membranes and adsorbents to remove chemical contaminants from aqueous media. This study covers the synthesis and usage of various polymeric nanocomposites in water treatment, as well as the major criteria that influence their performance, and highlights challenges and considerations for future research.

A Multifunctional Microspheric Soil Conditioner Based on Chitosan-Grafted Poly(acrylamide-co-acrylic acid)/Biochar

A multifunctional microspheric soil conditioner based on chitosan-grafted poly(acrylamide-co-acrylic acid)/biochar [CS-g-P(AM-co-AA)/BC] was prepared. First, the P(AM-co-AA) was synthesized and successfully grafted onto CS, and the three-dimensional network structure of microspheres was formed with N,N-methylenebis(acrylamide) as the cross-linking agent according to the inverse suspension polymerization method. Meanwhile, BC and urea were encapsulated into the body of microspheres during the polymerization. The structure of the microspheres was analyzed by Fourier transform infrared spectroscopy, polarized optical microscopy, and scanning electron microscopy, and the mechanism of adsorption of Cu²⁺ on the microspheres was investigated by X-ray photoelectron spectroscopy. Furthermore, the experimental results demonstrated the excellent water absorption and retention capabilities of microspheres, and the release rate of urea was dramatically reduced. Importantly, the introduction of BC significantly enhanced the adsorption performance of the microspheres with respect to heavy metal ions. Consequently, the multifunctional soil conditioner held promise for use in soil improvement and agricultural production.

Enhancing Cd(II) adsorption on rice straw biochar by modification of iron and manganese oxides

Metal oxide-modified biochar showed excellent adsorption performance in wastewater treatment. Iron nitrate and potassium permanganate were oxidative modifiers through which oxygen-containing groups and iron-manganese oxides could be introduced into biochar. In this study, iron-manganese (Fe-Mn) oxide-modified biochar (BC-FM) was synthesized using rice straw biochar, and the adsorption process, removal effect, and the mechanism of cadmium (Cd) adsorption on BC-FM in wastewater treatment were explored through batch adsorption experiments and characterization (SEM, BET, FTIR, XRD, and XPS). Adsorption kinetics showed that the maximum adsorption capacity of BC-FM for Cd(II) was 120.77 mg/g at 298 K, which was approximately 1.5-10 times the amount of adsorption capacity for Cd(II) by potassium-modified or manganese-modified biochar as mentioned in the literature. The Cd(II) adsorption of BC-FM was well fit by the pseudo-second-order adsorption and Langmuir models, and it was a spontaneous and endothermic process. Adsorption was mainly controlled via a chemical adsorption mechanism. Moreover, BC-FM could maintain a Cd removal rate of approximately 50% even when reused three times. Cd(II) capture by BC-FM was facilitated by coprecipitation, surface complexation, electrostatic attraction, and cation-π interaction. Additionally, the loaded Fe-Mn oxides also played an important role in the removal of Cd(II) by redox reaction and ion exchange in BC-FM. The results suggested that BC-FM could be used as an efficient adsorbent for treating Cd-contaminated wastewater.

The Removal of Pb2+ from Aqueous Solution by Using Navel Orange Peel Biochar Supported Graphene Oxide: Characteristics, Response Surface Methodology, and Mechanism

The value-added utilization of waste resources to synthesize functional materials is important to achieve the environmentally sustainable development. In this paper, the biochar supported graphene oxide (BGO) materials were prepared by using navel orange peel and natural graphite. The optimal adsorption parameters were analyzed by response surface methodology under the conditions of solution pH, adsorbent dosage, and rotating speed. The adsorption isotherm and kinetic model fitting experiments were carried out according to the optimal adsorption parameters, and the mechanism of BGO adsorption of Pb2+ was explained using Scanning Electron Microscope (SEM-EDS), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR). Compared with virgin biochar, the adsorption capacity of Pb2+ on biochar supported graphene oxide was significantly increased. The results of response surface methodology optimization design showed that the order of influence on adsorption of Pb2+ was solution pH > adsorbent dosage > rotating speed. The optimal conditions were as follows: solution pH was 4.97, rotating speed was 172.97 rpm, and adsorbent dosage was 0.086 g. In the adsorption−desorption experiment, the desorption efficiency ranged from 54.3 to 63.3%. The process of Pb2+ adsorption by BGO is spontaneous and endothermic, mainly through electrostatic interaction and surface complexation. It is a heterogeneous adsorption process with heterogeneous surface, including surface adsorption, external liquid film diffusion, and intra-particle diffusion.

Hydrogel Adsorbents for the Removal of Hazardous Pollutants—Requirements and Available Functions as Adsorbent

Over the last few decades, various adsorption functions of polymer hydrogels for the removal of hazardous pollutants have been developed. The performance of hydrogel adsorbents depends on the constituents of the gels and the functions produced by the polymer networks of the gels. Research on hydrogels utilizing the characteristic functions of polymer networks has increased over the last decade. The functions of polymer networks are key to the development of advanced adsorbents for the removal of various pollutants. No review has discussed hydrogel adsorbents from the perspective of the roles and functions of polymer networks in hydrogels. This paper briefly reviews the basic requirements of adsorbents and the general characteristics of hydrogels as adsorbents. Thereafter, hydrogels are reviewed on the basis of the roles and functions of the polymer networks in them for the removal of hazardous pollutants by introducing studies published over the last decade. The application of hydrogels as adsorbents for the removal of hazardous pollutants is discussed as well.

Application of magnetic biochar/quaternary phosphonium salt to combat the antibiotic resistome in livestock wastewater

The overuse and misuse of antibiotics in animal breeding for disease treatment and growth enhancement have been major drivers of the occurrence, diffusion, and accumulation of antibiotic resistance genes (ARGs) in wastewater. Strategies to combat ARG dissemination are pressingly needed for human and ecological safety. To achieve this goal, a biochar-based polymer, magnetic biochar/quaternary phosphonium salt (MBQ), was applied in livestock wastewater and displayed a high performance in bacterial deactivation and ARG decrease. Efficient antibacterial effects were achieved by both MBQ and quaternary phosphonium salt; however, the abundance and fold change of ARGs in the MBQ treatment indicated a more powerful ARG dissemination control than quaternary phosphonium salt. The application of MBQ evidently reduced the microbial diversity and may primarily be responsible for altering the ARG profiles in wastewater. Network, redundancy, and variation partitioning analyses were further employed to reveal that the microbial community and the presence of mobile genetic elements were two critical factors shaping the pattern of the antibiotic resistome in livestock wastewater. Considered together, these findings extend the application field of biochar and have important implications for reducing ARG dissemination risks in livestock wastewater.

Efficient removal of Cd (II) from aqueous solution by chitosan modified kiwi branch biochar

Production of cost-efficient composite materials from low-cost modified biochar for the removal of Cd (II) from wastewater is much needed to meet the growing needs of industrial wastewater treatments. A novel chitosan-modified kiwi branch biochar (CHKB) was fabricated as low-cost modified biochar for the removal of Cd (II) from aqueous solution. Batch adsorption and characterization experiments indicated that the modification of kiwi biochar (KB) by chitosan remarkably improved its adsorption performance. The results revealed that the adsorption isotherms can be best described by a Langmuir model and that a pseudo-second-order model fits the Cd (II) adsorption kinetics well, which indicates that it is a monolayer process controlled by chemisorption. CHKB exhibited a Langmuir maximum adsorption capacity of Cd (II) (126.58 mg g^-1), whereas that of KB was only 4.26 mg g^-1. The adsorption ability of CHKB was improved by increasing the surface area and an abundance of surface functional groups (-OH, -NH, CO, etc.). The cation exchange, electrostatic interaction, surface complexation, and precipitation were the main mechanisms in the sorption of Cd (II) on CHKB. Excellent adsorption performance, low cost, and environmental-friendliness made CHKB a fantastic adsorbent for the removal of Cd (II) in wastewater.

Preparation and adsorption performance of cellulose nanofibrils/polyvinyl alcohol composite gel spheres with millimeter size

Wastewater treatment is a huge problem facing human beings. The development of recyclable and efficient adsorption materials is of great benefit to solve the problem. Based on the biodegradable cellulose nanofibers (CNFs) derived from biomass resources, the large sized CNFs/PVA composite hydrogel spheres (CV-HSs, 1-3 mm) were successfully prepared by the inverse suspension pellet-forming technology using the polymers as raw materials, and another hydrophobic CNFs/PVA composite aerogel spheres (HCV-ASs) were also obtained by lyophilization and followed silylation of as-prepared CV-HSs. The CV-HSs showed excellent adsorption properties for simulated pollutants, including Cu²⁺, phenol and aniline in water. The maximum absorption capacity of CV-HSs was 17.22 mmol/g for Cu²⁺, 176.72 mg/g for phenol and 341.93 mg/g for aniline respectively. The HCV-ASs exhibited good absorption properties for weak polar organic solvents, such as petroleum ether, ethyl acetate and toluene. In summary, two kinds of large-sized CNFs/PVA composite gel spheres were successfully fabricated, and exhibited good adsorption properties for organic pollutants and heavy metal ions, indicating their potential for wastewater treatment.

Tough porous nanocomposite hydrogel for water treatment

Developing a cost-effective, stable, and recyclable adsorbent with high adsorption capacity and rapid adsorption kinetics is highly demanded for water treatment but has been proven challenging. Herein, we report a one-step strategy to synthesize tough porous nanocomposite hydrogel, by introducing biochar nanoparticles and interconnected pores into a polyacrylamide hydrogel matrix as an exemplary system. The polyacrylamide hydrogel provides the overall mechanical strength to carry loads and facilitate recycling, the biochar provides adsorptive locus for high adsorption capacity, and the interconnected pores expedite solvent transport for rapid adsorption kinetics. Mechanical characterizations manifest that the porous biochar hydrogel possesses a tensile strength of 128 kPa, a stretchability of 5.9, and a toughness of 538 J m^-2. Porous structure analysis reveals that the hydrogel contains an increscent specific surface area by 441% and an augmented pore volume by 279% compared to pure polyacrylamide hydrogel. Experiments pertaining to adsorption isotherms and kinetics, with methylene blue as the model adsorbate, indicate enhanced adsorption performances. The tough hydrogel also allows facile recycling and maintains mechanical robustness after five regeneration cycles. Furthermore, biocompatibility is endorsed by cytotoxicity test. The proposed method could open an ample space for designing and synthesizing tough porous nanocomposite hydrogels for water treatment.

Layered double hydroxides loaded sludge biochar composite for adsorptive removal of benzotriazole and Pb(II) from aqueous solution

In this work, a novel sludge biochar/Zn-Al layered double hydroxide composite (SL) was synthesized in a facile co-precipitation method, and it was used to simultaneously remove benzotriazole (BTA) and lead ion (Pb(II)). Batch adsorption experiments demonstrated that composites with sludge content of 1.0 g (SL-1.0) had a great adsorption performance for BTA and Pb(II). The maximum adsorption capacities of SL-1.0 for BTA and Pb(II) were 239.6 and 226.1 mg g^-1, respectively. There was preferential adsorption of BTA in BTA and Pb(II) binary system. The adsorption mechanism analysis indicated that the BTA and Pb(II) adsorption involved electrostatic attraction and chemical bonding with surface functional groups on SL-1.0. Specifically, hydrogen bonding and π-π interaction were mainly ascribed to BTA adsorption, while complexation with surface function groups dominated Pb(II) adsorption. With the advantages of facile synthesis and excellent adsorption capacity, SL-1.0 possesses great potential for simultaneously removing of BTA and Pb(II) from wastewaters.