Determination of glyphosate and phosphate in water by ion chromatography--inductively coupled plasma mass spectrometry detection

Recent Advances in Thiourea Based Colorimetric and Fluorescent Chemosensors for Detection of Anions and Neutral Analytes: A Review

Thioureas and their derivatives are organosulfur compounds having excellent biological and non-biological applications. These compounds contain S- and N-, which are nucleophilic and allow for establishing inter-and intramolecular hydrogen bonding. These characteristics make thiourea moiety a very important chemosensor to detect various environmental pollutants. This article covers a broad range of thioureas and their derivatives that are used for highly sensitive, selective, and simple fluorimetric (turn-off and turn-on), and colorimetric chemosensors for the detection and determination of different types of anions, such as CN-, AcO-, F-, ClO- and citrate ions, etc., and neutral analytes such as ATP, DCP, and Amlodipine, etc., in biological, environmental, and agriculture samples. Further, the sensing performances of thioureas-based chemosensors have been compared and discussed, which could help the readers for the future design of organic fluorescent and colorimetric sensors to detect anions and neutral analytes. We hope this study will support the new thoughts to design highly efficient, selective, and sensitive chemosensors to detect different analytes in biological, environmental, and agricultural samples.

Three-dimensional polymer phenylethnylcopper/nitrogen doped graphene aerogel electrode coupled with Fe3O4 NPs nanozyme: Toward sensitive and robust photoelectrochemical detection of glyphosate in agricultural matrix

BACKGROUND

Presently, glyphosate (Gly) is the most extensively used herbicide globally, Nevertheless, its excessive usage has increased its accumulation in off-target locations, and aroused concerns for food and environmental safety. Commonly used detection methods, such as high-performance liquid chromatography and gas chromatography, have limitations due to expensive instruments, complex pre-processing steps, and inadequate sensitivity. Therefore, a facile, sensitive, and reliable Gly detection method should be developed.

RESULTS

A photoelectrochemical (PEC) sensor consisting of a three-dimensional polymer phenylethnylcopper/nitrogen-doped graphene aerogel (PPhECu/3DNGA) electrode coupled with Fe3O4 NPs nanozyme was constructed for sensitive detection of Gly. The microscopic 3D network of electrodes offered fast transfer routes for photo-generated electrons and a large surface area for nanozyme loading, allowing high signal output and analytical sensitivity. Furthermore, the use of peroxidase-mimicking Fe3O4 NPs instead of natural enzyme improved the stability of the sensor against ambient temperature changes. Based on the inhibitory effect of Gly on the catalytic activity Fe3O4 NPs, the protocol achieved Gly detection in the range of 5 × 10-10 to 1 × 10-4 mol L-1. Additionally, feasibility of the detection was confirmed in real agricultural matrix including tea, maize seedlings, maize seeds and soil.

SIGNIFICANCE

This work achieved facile, sensitive and reliable analysis towards Gly, and it was expected to inspire the design and utilization of 3D architectures in monitoring agricultural chemicals in food and environmental matrix.

Low-background interference detection of glyphosate, glufosinate, and AMPA in foods using UPLC-MS/MS without derivatization

The abuse of herbicides has emerged as a great threat to food security. Herein, a low-background interference detection method based on UPLC-MS was developed for the simultaneous determination of glufosinate, glyphosate, and its metabolite aminomethylphosphonic acid (AMPA) in foods. Initially, this study proposed a simple and rapid pretreatment method, utilizing water extraction and PRiME HLB purification to isolate glyphosate, glufosinate, and AMPA from food samples. After the optimization of pretreatment conditions, the processed samples are then analyzed directly by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS) without pre-column derivatization. The method can effectively reduce interference from by-products of pre-column derivatization and background substrates of food sample, showing low matrix effects (ME) ranging from - 24.83 to 32.10%. Subsequently, the method has been validated by 13 kinds of food samples. The recoveries of the three herbicides in the food samples range from 84.2 to 115.6%. The limit of detection (LOD) is lower to 0.073 mg/kg, 0.017 mg/kg, and 0.037 mg/kg, respectively. Moreover, the method shows an excellent reproducibility with relative standard deviations (RSD) within 16.9%. Thus, the method can provide high trueness, reproducibility, sensitivity, and interference-free detection to ensure human health safety.

An on-off-on fluorescent probe for the detection of glyphosate based on a Cu2+-assisted squaraine dye sensor

The herbicide glyphosate, N-(phosphonomethyl)glycine, has been widely used in the past 40 years, and has had many adverse effects on human health. Here, we constructed a convenient "on-off-on" fluorescent platform for detection of glyphosate via Cu2+ modulated squaraine dye fluorescence quenching. The squaraine dye F-0 exhibited strong fluorescence, which could be quenched by the addition of Cu2+. However, the addition of glyphosate restored the fluorescence intensity of F-0 due to the formation of a Cu2+-glyphosate complex. F-0 was utilized as a fluorescent probe for the quantitative detection of glyphosate, with the lowest detection limit of 13.16 nmol L-1. Furthermore, this method demonstrated high selectivity and anti-interference capabilities. The successful monitoring of glyphosate in real samples was achieved using this detection strategy.

Bifunctional Cu(II)-containing PDA-PEI copolymer dots: Demonstration of a dual-mode platform for colorimetric-fluorescent detection of glyphosate in the environment

The reliable and accurate detection of glyphosate is urgently demanded because it is related to food and environmental safety. In this contribution, a PDA-PEI/Cu2+ complex that possesses peroxidase-mimetic activity and stimulus-responsive fluorescence was fabricated by coordinating Cu2+ with polydopamine-polyethyleneimine copolymer dots (PDA-PEI CPDs). With the introduction of Cu2+, the fluorescence intensity of PDA-PEI CPDs dropped sharply owing to the electron transfer effect. As a peroxidase-mimicking nanozyme, the PDA-PEI/Cu2+ complex owns catalytic capacity to oxidize the colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxTMB, leading a further fluorescence quenching by internal filtering effect by oxTMB. Once the glyphosate participated, the fluorescence signal of PDA-PEI CPDs is recovered significantly because of the formation of more stable Glyp-Cu2+ complexes, meanwhile the peroxidase-mimicking activity of PDA-PEI/Cu2+ complex could be strongly hindered. According to this principle, a novel and extremely convenient 'turn off' colorimetric and 'turn on' fluorescence sensing platform can be established for dual-mode detection of glyphosate. The favorable sensitivity and selectivity and were verified in the analysis of glyphosate in the environment through the marriage of dual-signal sensing platform. The detection limit of the dual-mode glyphosate sensing platform was 103.82 ng/mL for colorimetric assay and 16.87 ng/mL for fluorescent assay, respectively. Satisfactory recoveries in the range of 96.40%-104.66% were obtained, indicating the potential of this method for application in complicated real sample. Thereby, this strategy broadens the applications of polydopamine nanomaterials and holds a promising application in determination of pesticide residues.

Simultaneous determination of three strong polarity herbicides in tea by ion chromatography-triple quadrupole mass spectrometry

Due to lack of chromogenic groups and fluorescence groups, high boiling point, high polarity, low volatility, and small molecular weight of glyphosate, glufosinate and bentazone, the detection of three analyses were limited in all kinds of food. Herein, a method for the simultaneous determination of glyphosate, glufosinate and bentazone in tea by ion chromatography tandem triple quadrupole mass spectrometry (IC-MS) was developed, which is without organic solvent and complex derivatization. The recoveries of three compounds in different teas (black tea, green tea, white tea) ranged from 80.40 % to 107.00 %, and the intraday precision (n = 6) ranged from 0.57 % to 9.90 %, the daytime precision ranged from 1.00 % to 5.30 %, the quantitative limit (LOQ) ranged from 0.36 to 1.30 µg/L, and the detection limit (LOD) ranged from 0.11 to 0.39 µg/L. Furthermore, the detection limit and quantitative limit of glyphosate, glufosinate and bentazone by this method are lower than other methods in real samples. Meanwhile, the established method was successfully applied to determine the terminal residues of the three analytes in twelve tea samples from commercial market. Therefore, this method can provide reliable technical support for the study of residue status in vegetables and fruits.

A novel Cu(II)-assisted peptide fluorescent probe for highly sensitive detection of glyphosate in real samples: real application in test strips and smartphone

Glyphosate (Glyp) is an organophosphorus herbicide, and its abuse causes potential harm to the environment and human health. Thus, the development of simple and portable methods for rapid and visual detection of glyphosate is of great importance. Herein, we successfully developed a new fluorescent probe L with dansyl fluorophore as a fluorescent dye and tetrapeptide (Ala-Ser-Arg-His-NH2) as a recognition group. According to the design, L exhibited a specific fluorescence quenching response to Cu2+ and formed an L-Cu2+ ensemble with a molecular ratio of 2:1, demonstrating a limit of detection (LOD) as low as 12.04 nM. Interestingly, the L-Cu2+ ensemble as a relay response probe exhibited a specific fluorescence "off-on" response to glyphosate without interference from other pesticides and anions based on the strong complexation of glyphosate and Cu2+. The LOD of the L-Cu2+ ensemble for glyphosate was calculated as 12.59 nM. Additionally, the results of three recovery experiments with real samples showed that L has good practicability and accuracy in detecting glyphosate. Test strips were also fabricated to achieve facile detection of glyphosate to demonstrate the practical application potential of the L-Cu2+ ensemble. The L-Cu2+ ensemble was integrated with a smartphone for semi-quantification of glyphosate in a field environment under a 365 nm UV lamp.

Advanced Liquid Chromatography with Tandem Mass Spectrometry Method for Quantifying Glyphosate, Glufosinate, and Aminomethylphosphonic Acid Using Pre-Column Derivatization

Analytical limitations make it challenging to develop effective methodologies for understanding glyphosate-based herbicide levels in drinking water and groundwater. Due to their lack of chromophores and zwitterionic nature, glyphosate-based herbicides are difficult to detect using traditional methods. This paper offers a straightforward method for quantifying glyphosate, glufosinate, and aminomethylphosphonic acid (AMPA) via 9-fluorenylmethylchloroformate (FMOC-Cl) pre-column derivatization and analysis by liquid chromatography with tandem mass spectrometry (LC-MS/MS). Method development was focused on optimizing the critical variables for optimal derivatization using a 24-factorial design. We found that complete derivatization significantly depends on the inclusion of borate buffer to create the alkaline conditions necessary for aminolysis. Ethylenediaminetetraacetic acid (EDTA) addition was critical to minimize metallic chelation and ensure reproducible retention times and peaks. However, EDTA concentrations ≥5% decreased peak intensity due to ion suppression. The FMOC-Cl concentration and derivatization time exhibited a direct proportional relationship, with the complete reaction achieved with 2.5 mM FMOC-Cl after 4 h. Concentrations of FMOC-Cl greater than 2.5 mM led to the formation of oxides, which interfere with the detection sensitivity and selectivity. Desirable results were achieved with 1% EDTA, 5% borate, and 2.5 mM FMOC-Cl, which led to complete derivatization after 4 h.

Ratiometric Sensing of Glyphosate in Water Using Dual Fluorescent Carbon Dots

Glyphosate is a broad-spectrum pesticide used in crops and is found in many products used by industry and consumers. Unfortunately, glyphosate has been shown to have some toxicity toward many organisms found in our ecosystems and has been reported to have carcinogenic effects on humans. Hence, there is a need to develop novel nanosensors that are more sensitive and facile and permit rapid detection. Current optical-based assays are limited as they rely on changes in signal intensity, which can be affected by multiple factors in the sample. Herein, we report the development of a dual emissive carbon dot (CD) system that can be used to optically detect glyphosate pesticides in water at different pH levels. The fluorescent CDs emit blue and red fluorescence, which we exploit as a ratiometric self-referencing assay. We observe red fluorescence quenching with increasing concentrations of glyphosate in the solution, ascribed to the interaction of the glyphosate pesticide with the CD surface. The blue fluorescence remains unaffected and serves as a reference in this ratiometric approach. Using fluorescence quenching assays, a ratiometric response is observed in the ppm range with detection limits as low as 0.03 ppm. Our CDs can be used to detect other pesticides and contaminants in water, as cost-effective and simple environmental nanosensors.

Determination of Phosphoethanolamine in Urine with HPLC-ICPMS/MS Using 1,2-Hexanediol as a Chromatographic Eluent

The importance of element-selective detection with inductively coupled plasma mass spectrometry (ICPMS) has been significantly increased in recent years following the introduction of tandem ICPMS (ICPMS/MS), which unlocked access to nonmetal speciation analysis. However, nonmetals are ubiquitous, and the feasibility of nonmetal speciation analysis in matrices with complex metabolomes is yet to be demonstrated. Herein, we report the first phosphorous speciation study by HPLC-ICPMS/MS in a human sample, namely, urine, involving the determination of the natural metabolite and biomarker phosphoethanolamine. A simple one-step derivatization procedure was employed to enable the separation of the target compound from the hydrophilic phosphorous metabolome in urine. The challenge of eluting the hydrophobic derivative under ICPMS-compatible chromatographic conditions was addressed by employing hexanediol, a novel chromatographic eluent recently described in our previous work but has not yet been exploited in a real-world application. The developed method features fast chromatographic separation (<5 min), no need for an isotopically labeled internal standard, and an instrumental LOD of 0.5 μg P L^-1. The method was evaluated for recovery (90-110%), repeatability (RSD ±5%), and linearity (r² = 0.9998). The method accuracy was thoroughly examined by comparing with an independently developed method based on HPLC-ESIMS/MS without derivatization, where agreement was found within ±5-20%. An application is presented to gain first insight into the variability in the human excretion of phosphoethanolamine, which is key for the interpretation of its levels as a biomarker, by repeated urine collection from a group of volunteers over 4 weeks.

A Novel and Sensitive Fluorescent Probe for Glyphosate Detection Based on Cu2+ Modulated Polydihydroxyphenylalanine Nanoparticles

A novel and sensitive fluorescent probe based on Cu²⁺-modulated polydihydroxyphenylalanine nanoparticles (PDOAs) has been developed for the detection of glyphosate pesticides. Compared to conventional instrumental analysis techniques, fluorometric methods have obtained good results in the field of agricultural residue detection. However, most of the fluorescent chemosensors reported still have some limitations, such as long response times, the high limit of detection, and complex synthetic procedures. In this paper, a novel and sensitive fluorescent probe based on Cu²⁺ modulated polydihydroxyphenylalanine nanoparticles (PDOAs) has been developed for the detection of glyphosate pesticides. The fluorescence of PDOAs can be effectively quenched by Cu²⁺ through the dynamic quenching process, which was confirmed by the time-resolved fluorescence lifetime analysis. In the presence of glyphosate, the fluorescence of the PDOAs-Cu²⁺ system can be effectively recovered due to the higher affinity of glyphosate for Cu²⁺, and thus released the individual PDOAs. Due to the admirable properties such as high selectivity to glyphosate pesticide, "turn on" fluorescence response, and ultralow detection limit of 1.8 nM, the proposed method has been successfully applied for the determination of glyphosate in environmental water samples.

A novel and ultrasensitive fluorescent probe derived from labeled carbon dots for recognitions of copper ions and glyphosate

Labeling materials with special functional groups are very valuable for the creation of novel probes. Hence, a novel fluorescent probe was constructed by conjugating 4-butyl-3-thiosemicarbazide (BTSC) with carbon dots (CDs). The CDs labeled by BTSC (BTSC-CDs) displayed a strong capability for recognition of Cu²⁺ and Cu²⁺ could quench the emission of BTSC-CDs significantly. The fluorescence quenching was proved to be a static quenching which was resulted from the interaction between BTSC-CDs and Cu²⁺ to form a ground-state BTSC-CDs/Cu²⁺complex, and the fluorescence intensities showed a good linear correlation with Cu²⁺ concentrations in the range of 0.20-30 μM. What is more important, by adding glyphosate into the sensor system of BTSC-CDs/Cu²⁺ the fluorescence of the probe turned on again owing to the stronger chelating between glyphosate and Cu²⁺ than between BTSC-CDs and Cu²⁺. This could realize the specific detection of glyphosate and the limit of detection was low to 0.27 μM. Detecting glyphosate using the complex BTSC-CDs/Cu²⁺ system in actual samples with satisfactory outcomes indicated that a novel fluorescent probe for Cu²⁺ and subsequent glyphosate detections has been provided.

Magnetic micromixing for highly sensitive detection of glyphosate in tap water by colorimetric immunosensor

Glyphosate is the most widely used herbicide in the world and, in view of its toxicity, there is a quest for easy-to-use, but reliable methods to detect it in water. To address this issue, we realized a simple, rapid, and highly sensitive immunosensor based on gold coated magnetic nanoparticles (MNPs@Au) to detect glyphosate in tap water. Not only the gold shell provided a sensitive optical transduction of the biological signal - through the shift of the local surface plasmon resonance (LSPR) entailed by the nanoparticle aggregation -, but it also allowed us to use an effective photochemical immobilization technique to tether oriented antibodies straight on the nanoparticles surface. While such a feature led to aggregates in which the nanoparticles were at close proximity each other, the magnetic properties of the core offered us an efficient tool to steer the nanoparticles by a rotating magnetic field. As a result, the nanoparticle aggregation in presence of the target could take place at higher rate (enhanced diffusion) with significant improvement in sensitivity. As a matter of fact, the combination of plasmonic and magnetic properties within the same nanoparticles allowed us to realize a colorimetric biosensor with a limit of detection (LOD) of 20 ng∙L^-1.

Determination of Glyphosate in White and Brown Rice with HPLC-ICP-MS/MS

Background: In 2017, the European Commission renewed the approval of glyphosate (GLY) but only for five years. GLY remains one of the most controversial and studied molecules. Method: A simplified method was tested for the determination of GLY in white rice (WR) and brown rice (BR), after extraction only with a methanol solution, by liquid chromatography coupled with inductively coupled mass triple quadrupole (HPLC-ICP-MS/MS) with a PRP-X100 anionic column. After performing a test on groundwater, the quantification of GLY in WR and BR was validated in terms of the LOD, LOQ, accuracy, precision, linearity, and the matrix effect. Results: The LOD was 0.0027 mg kg−1 for WR and 0.0136 mg kg−1 for BR. The LOQ was 0.0092 mg kg−1 for WR and 0.0456 mg kg−1 for BR. The mean recoveries were within 76−105% at three fortification levels. The relative standard deviation for the analysis (five replicates for three spike levels) was < 11% for both matrices. A linear response was confirmed in all cases in the entire concentration range (R2WR = 1.000 and R2BR = 0.9818). Conclusion: The proposed method could be considered useful for the determination of GLY in different types of rice and designed and adapted for other cereals. The matrix effect, quantified in BR matrix extraction, could be avoided by using a matrix-matched calibration line.

Comparison of Glyphosate Detection by Surface-Enhanced Raman Spectroscopy Using Gold and Silver Nanoparticles at Different Laser Excitations

Glyphosate is one of the most widely used pesticides in the world, but it has been shown to persist in the environment and therefore needs to be detected in food. In this work, the detection of glyphosate by surface-enhanced Raman scattering (SERS) using gold and silver nanoparticles and three different commonly used laser excitations (532, 632, and 785 nm wavelengths) of a Raman microscope complemented with a portable Raman spectrometer with 785 nm excitation is compared. The silver and gold nanosphere SERS substrates were prepared by chemical synthesis. In addition, colorimetric detection of glyphosate using cysteamine-modified gold and silver nanoparticles was also tested. The best results were obtained with Ag NPs at 532 nm excitation with a detection limit of 1 mM and with Au nanoparticles at 785 nm excitation with a detection limit of 100 µM. The SERS spectra of glyphosate with cysteamine-modified silver NPs improved the detection limits by two orders of magnitude for 532 nm excitation, i.e., up to 10 µM, and by one order of magnitude for 632 and 785 nm excitation wavelengths.

Comparison of Ion Chromatography Conductivity Detection (IC-CD) and Ion Chromatography Inductively Coupled Plasma Mass Spectrometry (IC-ICP-MS) for the Determination of Phosphonic Acid in Grapevine Plant Parts, Wine, and Soil

Potassium dihydrogen phosphonate had been allowed as a plant strengthener in organic viticulture in the European Union only until 2013, supporting the control of grapevine downy mildew. Therefore, low or nondetectable levels are a prerequisite for marketing of organic wines and, consequently, validated analytical methods are of major interest. Herein, two methods based on ion chromatography conductivity detection (IC-CD) or ion chromatography inductively coupled plasma mass spectrometry (IC-ICP-MS) for the determination of phosphonic acid (H₃PO₃) from 14 different plant matrices of Vitis vinifera L., wine, and soil were developed, validated, and compared. Extraction recoveries ranged from 95.1 to 99.3%. Limits of quantification (LOQ) ranged in liquid and solid samples from 3.8 to 16.8 μg/kg and 0.08 to 2.41 mg/kg for ICP-MS detection and from 39.9 to 593.7 μg/kg and 3.51 to 58.7 mg/kg for CD, respectively. Data on a current anonymized selection of 100 conventionally and 30 organically produced wines are briefly presented to demonstrate the suitability of the method.

Enhanced Ultrasensitive Photoelectrochemical Probe for Phosphate Detection in Water Based on a Zirconium-Porphyrin Framework

Excessive phosphate poses a serious ecological and human health risk, and thereby, monitoring its trace concentration is of great significance to environmental protection and human health. In this work, a zirconium-porphyrin framework (PCN-222) with excellent stability and unique luminescence properties was designed to modify the surface of the indium tin oxide electrode, which was first used as a photoelectrochemical (PEC) probe for phosphate detection. The PCN-222-modified PEC probe demonstrated an excellent selectivity and stability and indicated a linear response to phosphate in the range of 0-10⁶ nM with a limit of detection (LOD) as low as 1.964 nM. To the best of our knowledge, this is the phosphate probe with the lowest LOD, and this is also the first signal-on PEC probe toward phosphate based on PCN-222. More importantly, the PEC probe can be validated for the good applicability of trace phosphate detection in real water samples, indicating a good application prospect. Finally, a series of electrochemical and spectroscopic studies have proved that phosphate can bind to the indium tin oxide (ITO)/PCN-222 electrode, which shortens the distance of the space charge region while reducing the bandwidth and thus facilitates the transfer of photogenerated electrons across the energy band barrier to reduce O₂ in the electrolyte, producing an enhanced cathodic photocurrent signal. The proposed strategy of the highly sensitive PEC probe provides a promising platform for more effective label-free phosphate monitoring in the environment and organisms.

SERS Determination of Trace Phosphate in Aquaculture Water Based on a Rhodamine 6G Molecular Probe Association Reaction

Although phosphate (Pi) is a necessary nutrient for the growth of aquatic organisms, the presence of excess Pi leads to water eutrophication; thus, it is necessary to accurately determine the content of Pi in water. A method for the determination of trace Pi in aquaculture water was developed based on surface-enhanced Raman spectroscopy (SERS) combined with rhodamine 6G (R6G)-modified silver nanoparticles (AgNPs) as the active substrate. The adsorption of R6G on the AgNP surfaces led to a strong SERS signal. However, in the presence of Pi and ammonium molybdate, phosphomolybdic acid formed, which further associated with R6G to form a stable R6G-PMo₁₂O₄₀³⁻ association complex, thereby hindering the adsorption of R6G on the AgNPs, and reducing the SERS intensity; this sequence formed the basis of Pi detection. The decrease in the SERS intensity was linear with respect to the Pi concentration (0.2–20 μM), and the limit of detection was 29.3 nM. Upon the application of this method to the determination of Pi in aquaculture water, a recovery of 94.4–107.2% was obtained (RSD 1.77–6.18%). This study provides an accurate, rapid, and sensitive method for the trace determination of Pi in aquaculture water, which is suitable for on-site detection.

Ratiometric fluorescence sensor for sensitive detection of inorganic phosphate in environmental samples

Fast, simple, and low-cost on-site visualized detection of inorganic phosphate (Pi) is in great demand since phosphate is the major reason of eutrophication. In this work, a ratiometric fluorescent probe composed by green carbon dots (GCDs) and red carbon dots (RCDs) has been established for high-sensitivity and selective sensing of Pi. A trend of color change from red to green is observed for the detection of Pi under ultraviolet light and the detection limit is 0.09 μM in the range of 0 to 55 μM. Fluorescent test paper prepared from the probe solution was successfully applied to semi-quantitative visual detection of Pi in real-world water and soil samples, which shows great real-world application potentials.

A reaction-based system for the colorimetric detection of glyphosate in real samples

Glyphosate is widely used herbicides and causes several diseases in humans. Therefore, the detection of glyphosate is curial and urgent. Studies on the detection of glyphosate in literature are often based on inhibition of the enzyme acetylcholinesterase. In this study, we developed two simple colorimetric sensors, BP-Cl and CP-Cl, by linking 3-chloro-4-methylpyridine with 4-(dimethylamino)cinnamaldehyde or 4-(dimethylamino)benzaldehyde in a one-step reaction. The colorimetric and optical sensing properties of these compounds were investigated by the naked-eye and UV-Vis spectrophotometer in ACN/HEPES buffer (5 mM pH 8.0, 1:1 v/v). The sensors displayed high sensitivity and selectivity for glyphosate by color changes, which ranged from colorless to yellow for BP-Cl and yellow to orange for CP-Cl. The detection limits of BP-Cl and CP-Cl by the naked-eye detection were found as 15 µM and 10 µM. On the other hand, the detection limits of BP-Cl and CP-Cl via UV-Vis measurements were calculated as 0.847 µM and 1.23 µM, respectively. Moreover, the sensors were able to monitor glyphosate in water samples using the naked-eye, UV-Vis spectroscopy, and filter paper strips.

A turn-on fluorescence sensor based on Cu2+ modulated DNA-templated silver nanoclusters for glyphosate detection and mechanism investigation

The abuse application of glyphosate can result in a potential hazard for environment and human, however its ultrasensitive detection remains challenging. Herein, a Cu2+ modulated DNA-templated silver nanoclusters (DNA-AgNCs) sensor was constructed to sensitively determine glyphosate based on the turn-on fluorescence strategy. The fluorescence quenching of DNA-AgNCs occurred with the existence of Cu2+. Upon the presence of glyphosate, the functional groups on the surface of glyphosate could chelate with Cu2+, following the fluorescence recovery of DNA-AgNCs. Through the stoichiometric methods, we unveil that Cu2+-trigged fluorescence quenching mode is a combination of static and dynamic quenching with the static mode being predominant. In DNA-AgNCs/Cu2+ system, the carboxylate, amine, and phosphonate groups of glyphosate interact with Cu2+ through chelation, in which the carboxylate oxygen, the phosphonate oxygen atoms, and the monoprotonated secondary amine nitrogen atom and Cu2+ form chelate rings. This fluorescence sensor showed a desired linearity of glyphosate analysis under the optimum conditions, ranging from 15 to 100 μg/L with a low detection down to 5 μg/L. Moreover, the proposed sensor was successfully utilized to measure glyphosate in real samples, indicating a promising application in pesticide residues detection.

New Fluorescent Probes for the Sensitive Determination of Glyphosate in Food and Environmental Samples

In this paper, a dual-functional probe, 2-(benzothiazol)-4-(3-hydroxy-4-methylphenyl) imino phenol (BHMH), was synthesized and characterized for the simultaneous detection of Cu2+ and Fe3+ in dimethyl sulfoxide/4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (DMSO/HEPES) (1:4, v/v, pH = 6.0). The limits of detections (LODs) for Cu2+ and Fe3+ were 9.05 and 48 nM, respectively. Based on the competitive coordination, the complex BHMH-Cu2+/Fe3+ exhibited good sensitivity and selectivity for glyphosate. The LODs of BHMH-Cu2+ and BHMH-Fe3+ for glyphosate were 0.41 and 0.63 μM, respectively. The probe quantitatively detected glyphosate in tap water, Songhua River water, local water and soil, and food samples. The colorimetric on-site glyphosate sensing through the probe BHMH-Cu2+ was also studied based on smartphones. BHMH and BHMH-Cu2+/Fe3+ exhibited outstanding imaging capabilities for Cu2+, Fe3+, and glyphosate in living cells with low cytotoxicity, especially the first time for glyphosate.

Challenges in the design of electrochemical sensor for glyphosate-based on new materials and biological recognition

Glyphosate (GLY) is the main ingredient in the weed killer Roundup and the most widely used pesticide in the world. Studies of the harmful effects of GLY on human health began to become more wide-ranging after 2015. GLY is listed by the International Agency for Research on Cancer (IARC) as a carcinogenic hazard to humans. Moreover, GLY has the property to complex with transition metals and are stable for long periods, being considered a high-risk element for different matrices, such as environmental (soil and water) and food (usually genetically modified crops). Since that, it was noticed an increment in the development of new analytical methods for its determination in different matrices like food, environmental and biological fluids. Noteworthy, the application of electrochemical techniques for downstream detection sparked interest due to the ability to minimize or eliminate the use of polluting chemicals, using simple and affordable equipment. This work aims to review the contribution of the electroanalytical methods for the determination of GLY in different food and environmental matrices. Parameters such as the electrochemical transduction techniques based on the electrical measurement signals, receptor materials for electrodes preparation, and the detection mechanisms are described in this review. The literature review shows that the electrochemical sensors are powerful detection system that can be improved by their design and by their portability to fulfil the needs of the GLY determination in laboratory benches, or even in situ analysis.

Amperometric Environmental Phosphate Sensors

We report a novel amperometric sensor for aqueous phosphate ions in freshwater systems based on the reductive square wave voltammetry of molybdate(VI) anions immobilized within a chitosan matrix deposited on a glassy carbon electrode. A sensitivity of 4.4 ± 0.1 μA/μM was realized together with a LOD of 0.15 μM. The sensor was insensitive to chloride and nitrate ions below a threshold concentration of 1.0 mM. Analytical measurements were successfully made in authentic samples of tap and pond water.

A method to assess glyphosate, glufosinate and aminomethylphosphonic acid in soil and earthworms

A new sensitive and selective analytical methodology to quantify glyphosate (GLY), aminomethylphosphonic acid (AMPA), and glufosinate (GLU) in both soil and earthworms (Allolobophora chlorotica) was developed. The extraction and purification methods were optimized. The samples were extracted with various aqueous solutions (HNO3, H2O, KOH and borate buffer) and derivatized with 9-Fluorenylmethyl chloroformate (FMOCCl). To optimize the extraction step, a method to remove the excess FMOCCl was applied based on liquid-liquid extraction with diethyl ether. The purification of derivatized extracts was carried out using XLB solid phase extraction (SPE) cartridges before internal standard quantification by liquid chromatography coupled to tandem mass spectrometry (LC/MS/MS). The elution step was optimized to obtain the best recoveries possible, which was with acidic methanol (1% formic acid) (67% for GLY, 70% for GLU and 65% for AMPA). The extraction and purification method followed by analysis of the two herbicides and AMPA in soils using LC/MS/MS determined limit of quantification (LOQ) values of 0.030 μg g - 1 for GLY, 0.025 μg g - 1 for AMPA and 0.020 µg g - 1 for GLU . For earthworms, LOQ were 0.23 μg g - 1 for GLY, 0.20 μg g - 1 for AMPA and 0.12 μg g - 1 for GLU. . The developed method was applied to determine these compounds in natural soils and earthworms.

Rapid and accurate detection of phosphate in complex biological fluids based on highly improved antenna sensitization of lanthanide luminescence

Rapid and accurate detection of phosphate (Pi) in complex biological fluid is of critical importance for timely warning of Pi accumulation and monitoring Pi related pathological process. Up to date, various luminescent probes have been developed for Pi determination in aqueous media. However, the huge obstacles of the current probes suffer from the inherent issues such as time-consuming, tedious preparation and unavoidable background interference during Pi detection. To circumvent this limitation, we proposed a universal and facile strategy to fabricate a novel sensitizer-Ln³⁺@surfactant micelle probe with time-resolved luminescent (TRL) superiority through the self-assembly of sensitizer, Ln³⁺ and surfactant. Through this design, the sensitizer-Ln³⁺ chelate can be encapsulated into the surfactant constructed micelle and Ln³⁺ luminescence can be substantially lighted up through the effective energy transfer from the coordinated sensitizer and the assistance of Triton X-100. Such high TRL signal can be sensitively and specifically quenched by Pi, which was attributed to the specific coordination competition between sensitizer and Pi towards Ln³⁺. Benefitting from the background-free interference and highly sensitive TRL response of the sensitizer-Ln³⁺@surfactant probe, we achieved the rapid, selective and sensitive detection of Pi in the range of 0.5-120 μM with a limit of detection (LOD) of 0.19 μM. Furthermore, the accuracy of the proposed method based on the Ln³⁺ involved micelle probes was further verified through the quantitation of Pi in real biological samples.

Simultaneous Quantification of Commonly Used Counter Ions in Peptides and Active Pharmaceutical Ingredients by Mixed Mode Chromatography and Evaporative Light Scattering Detection

In academia and industry, the analysis of counter ions in small molecules and synthetic peptides represents a great challenge. Due to the frequent use of salt forms and the application of a wider range of counter ions in pharmaceutically used substances, simple and generic methods for quantification are required. Especially, the analysis of trifluoracetic acid (TFA) in synthetic peptides is of high interest. Quantification of TFA is needed to assess the content and safety of synthetic peptides and for the interpretation of functional assay results, respectively. In here, a full quantitative mixed mode high performance liquid chromatography based method coupled to evaporative light scattering detection is presented. Finally, 14 positively and negatively charged counter ions were simultaneously quantified within 30 minutes. The method was validated in terms of specificity, accuracy, precision, limit of quantification, sample stability and carry over as proposed by the International Council of Harmonization. In order to prove the applicability of the procedure, small molecules reference substances and synthetic peptides were analyzed, respectively. The obtained results indicated a successful determination of counter ions in small molecules and differences to expected concentrations of prepared peptide solutions. Furthermore, an unexpectedly high content of sodium was observed for synthetic peptides.

Validation of a simple ion chromatography method for simultaneous determination of glyphosate, aminomethylphosphonic acid and ions of Public Health concern in water intended for human consumption

The herbicide glyphosate and its main metabolite aminomethylphosphonic acid (AMPA) are generally studied in environmental samples in the investigation of contamination of soil, plants, water and food. Many analytical methods are based on liquid chromatography or high-performance liquid chromatography, with pre-column or post-column derivatization; in addition, the chromatograph can be coupled to mass spectrometers for detection and quantification. Gas chromatography and spectroscopic and electrochemical methods have also been used. In this work, a simple low-cost method is presented for the analysis of water intended for human consumption with the quantification not only of glyphosate and AMPA, but also of other ions of interest to public health (fluoride, chlorite, bromate, chloride, nitrite, nitrate, sulfate and phosphate). Based on ion chromatography with conductivity detection (chemical suppression of eluent conductivity), the key point in this method is the use of gradient elution with two eluents of different pH and ionic strength, not requiring derivatization. There is no interference from the other ions at higher concentrations. The detection limits obtained for glyphosate and AMPA were 15 μg L-1 and 80 μg L-1, respectively. As the method allows the analysis of a large number of samples, it has been successfully applied to monitoring the quality of tap water in 89 municipalities in the northeast region of the State of São Paulo, Brazil.

Glyphosate and other highly polar pesticides in fruit, vegetables and honey using ion chromatography coupled with high resolution mass spectrometry: Method validation and its applicability in an official laboratory

An analytical method, using ion chromatography coupled to high resolution mass spectrometry was developed and validated to quantify glyphosate, glufosinate, ethephon, fosetyl aluminium and their related metabolites. This method allows multiresidue analysis of 11 highly polar molecules in a single chromatographic run, without derivatization step, using acidified water with low level of acetonitrile as extraction solvent. Three different matrices that are representative of commodity group were studied and validated: one fruit (grapes), one cereal (wheat) and honey, according to the criteria established by SANTE/12682/2019 taking into account maximum residue limits indicated by Regulation (EC) No. 396/2005, confirming that the procedure was selective, repeatable and robust. Matrix effect was studied and linearity was evaluated comparing analytical response differences between solvent standard solutions and matrix-matched calibration curve. Due to the relevant matrix effect observed, the use of response factor (RF) approach to quantify analytical batch was evaluated, using isotopically labelled internal standardisation. The in-depth study, validation results and several proficiency tests, used to verify procedure performance, demonstrated that the method is fit for purpose to routine analysis in an official laboratory. Moreover, it allows surveillance activities in fruits and vegetables control, as indicated by European Community, furthermore monitoring presence of polar pesticides, at low level, in some particular food as honey that could become environmental pollution indicator.

A turn-on fluorescent sensor based on carbon dots from Sophora japonica leaves for the detection of glyphosate

Carbon dots (CDs) having low cost and low toxicity and synthesized via a green route were applied to establish a fluorescent nanoprobe for the measurement of glyphosate. The synthesis was realized via a one-pot hydrothermal procedure using Sophora japonica leaves as the carbon source. It was found that electron transfer occurred between Fe3+ and the as-prepared CDs. Therefore, Fe3+ exhibited a specific dynamic-quenching toward CDs. However, the electron transfer process was inhibited by glyphosate. The fluorescence of the quenched CDs/Fe3+ system was recovered by the addition of glyphosate. It resulted from the strong complexation between Fe3+ and the functional groups (like -PO3H2 and -COOH) in the glyphosate molecule. These functional groups captured Fe3+ from the CD/Fe3+ system to reduce the electron transfer. With such a design, the rapid detection of glyphosate could be realized by this turn-on fluorescent sensor based on the CD/Fe3+ system. Under optimal conditions, the CD/Fe3+ system showed a concentration-dependent fluorescent response toward glyphosate in the linear range from 0.1 to 16 ppm. The limit of detection was calculated to be as low as 8.75 ppb (3σ/S). In addition, the successful detection of glyphosate in real samples with satisfactory recoveries exhibited a practical application of the CD/Fe3+ nanoprobe in food safety and environmental monitoring.

A turn-on fluorescent nanoprobe based on N-doped silicon quantum dots for rapid determination of glyphosate

N-Doped silicon quantum dots (N-SiQD) were synthesized using N-[3-(trimethoxysily)propyl]-ethylenediamine and citric acid as silicon source and reduction agent, respectively. The N-SiQD shows a strong blue fluorescence with a high quantum yield of about 53%. It is found that a selective static quenching process occurs between N-SiQDs and Cu2+. Glyphosate can inhibit this phenomenon and trigger the rapid fluorescence enhancement of the quenched N-SiQDs/Cu2+ system due to the specific interaction between Cu2+ and glyphosate. With such a design, a turn-on fluorescent nanoprobe based on N-SiQD/Cu2+ system was established for rapid determination of glyphosate. The determination signal of N-SiQD/Cu2+ was measured at the optimum emission wavelength of 460 nm after excitation at 360 nm. Under optimal conditions, the turn-on nanoprobe showed a linear relationship between fluorescent response and glyphosate concentrations in the range 0.1 to 1 μg mL-1. The limit of determination was calculated to 7.8 ng mL-1 (3σ/S). Satisfactory recoveries were obtained in the determination of spiked water samples, indicating the potential use for environmental monitoring. Graphical abstract Schematic representation of N-SiQD/Cu2+ system for glyphosate determination. Fluorescence quenching of N-SiQDs induced by copper ions and the succedent fluorescent "turn on" triggered by glyphosate.

Simultaneous and direct determination of glyphosate and AMPA in water samples from the hydroponic cultivation of eucalyptus seedlings using HPLC-ICP-MS/MS

Glyphosate is the main herbicide currently used in the world due to wide applicability and efficiency in controlling weeds in many crops. However, its overuse may lead to undesirable impacts on the environment and to human health in the long run. This present study aimed to optimize and validate solid phase extraction (SPE) using an anionic resin for the simultaneous and direct determination of glyphosate and aminomethylphosphonic acid (AMPA) in water samples using high-performance liquid chromatography combined with inductively coupled plasma with triple quadrupole mass spectrometer (HPLC-ICP-MS/MS). The results showed that recovery percentage and relative standard deviation were 103.9 ± 7.9 and 99.40 ± 9.9% for glyphosate and AMPA, respectively. The validation certified that the method was precise, accurate, linear, and selective, with a limit of quantification of 1.09 and 0.29 μg L-1 for glyphosate and AMPA, respectively. The optimized methodology reached the concentration factor of 250 times and was successfully applied to analyze water samples from hydroponic cultivation of the eucalyptus seedlings. The results showed that the exudation process occurs at glyphosate doses starting from 2 L ha-1.

Detection of inorganic phosphor in environmental water samples using a lanthanide and nanoparticle chemosensor based on Fӧrster resonance energy transfer

A novel chemosensor is presented for the detection of inorganic phosphate (Pi) in environmental water samples. The sensing solution is comprised of terbium (Tb³⁺) chelated to ethylenediaminetetraacetic acid (EDTA) acid and cetyltrimethylammonium bromide (CTAB)-capped gold nanoparticles (Au NPs). Upon mixing, Tb-EDTA and Au NPs undergo Fӧrster resonance energy transfer (FRET) in which the luminescence from the lanthanide ion is quenched. Upon the addition of Pi, Au NPs aggregate and precipitate out of solution. The aggregation of Au NPs results in the restoration of the Tb-EDTA luminescence signal, which correlates linearly to the Pi concentration in the matrix of analysis. The limit of detection (LOD) of the luminescence sensor (83 ng·mL^-1) is within the range of LODs previously reported for on-site monitoring of Pi. Quantitative analysis carried out via the multiple standard additions method provides accurate determination of Pi concentrations in heavily contaminated environmental waters.

Spectrophotometric Detection of Glyphosate in Water by Complex Formation between Bis 5-Phenyldipyrrinate of Nickel (II) and Glyphosate

A spectrophotometric method for the determination of glyphosate based on the monitoring of a complex formation between bis 5-phenyldipyrrinate of nickel (II) and the herbicide was developed. The method showed a short response time (10 s), high selectivity (very low interference from other pesticides and salts), and high sensitivity (LOD 2.07 × 10−7 mol/L, LOQ 9.87 × 10−7 mol/L, and a Kd from 1.75 × 10−6 to 6.95 × 10−6 mol/L). The Job plot showed that complex formation occurs with a 1:1 stoichiometry. The method was successfully applied in potable, urban, groundwater, and residual-treated water samples, showing high precision (0.34–2.9%) and accuracy (87.20–119.04%). The structure of the complex was elucidated through theoretical studies demonstrating that the nickel in the bis 5-phenyldipyrrinate forms a distorted octahedral molecular geometry by expanding its coordination number through one bond with the nitrogen and another with the oxygen of the glyphosate’ carboxyl group, at distances between 1.89–2.08 Å.

Development of a nickel oxide/oxyhydroxide-modified printed carbon electrode as an all solid-state sensor for potentiometric phosphate detection

This work describes the preparation, characterization and use of a nickel oxide/oxyhydroxide-printed carbon electrode as an efficient potentiometric phosphate sensor.

Zirconium metal organic frameworks-based DGT technique for in situ measurement of dissolved reactive phosphorus in waters

In an effort to provide early warnings for the occurrence of eutrophication, it is highly desirable to develop an accurate and efficient technique to ensure continuous monitoring of dissolved reactive phosphorus (DRP) in the aquatic environment from the viewpoint of environmental management. Herein, a new diffusive gradient in thin film (DGT) technique was developed and evaluated for in situ measurement of DRP in waters, in which Zr-based metal organic frameworks (MOFs, UiO-66) were utilized as aqueous binding agent (abbreviated as UiO-66 DGT). As expected, the UiO-66 DGT demonstrated high uptake capacity towards phosphorus (20.8 μg P cm^-2). Meanwhile, an excellent linearity between the accumulated DRP mass and deployment time over 5 d (R² = 0.996) was obtained regardless of high or low phosphate solution. In addition, effective diffusion coefficients (D) of DRP increased exponentially with increasing ionic strengths (R² = 0.99). Based on the rectified D, the performance of the UiO-66 DGT was independent of solution pH (6.5-8.5) and ionic strengths (ranging from 0.01 to 100 mmol L^-1). Furthermore, field deployments of the UiO-66 DGT were undertaken in a natural eutrophic lake (Lake Chaohu, China). It was noteworthy that DRP could be continually accumulated by the UiO-66 DGT for more than 14 d and good agreements were obtained between the concentrations measured by DGT (C_DGT) and those by ex situ chemical extraction method in solution (C_sol), as reflected by C_DGT/C_sol of 0.9-1.1. In situ determination of DRP speciation was also carried out at different sites across Lake Chaohu. Overall, this study contributed to a better constructing of liquid binding phase DGT for the measurement of DRP in waters, facilitating the widespread application of the UiO-66 DGT as a routine monitoring technique and for large-scale environmental analysis.

Highly Selective Polypyrrole MIP-Based Gravimetric and Electrochemical Sensors for Picomolar Detection of Glyphosate

There is a global debate and concern about the use of glyphosate (Gly) as an herbicide. New toxicological studies will determine its use in the future under new strict conditions or its replacement by alternative synthetic or natural herbicides. In this context, we designed biomimetic polymer sensing layers for the selective molecular recognition of Gly. Towards this end, complementary surface acoustic wave (SAW) and electrochemical sensors were functionalized with polypyrrole (PPy)-imprinted polymer for the selective detection of Gly. Their corresponding limits of detection were on the order of 1 pM, which are among the lowest values ever reported in literature. The relevant dissociation constants between PPy and Gly were estimated at [K_d1 = (0.7 ± 0.3) pM and K_d2 = (1.6 ± 1.4) µM] and [K_d1 = (2.4 ± 0.9) pM and K_d2 = (0.3 ± 0.1) µM] for electrochemical and gravimetric measurements, respectively. Quantum chemical calculations permitted to estimate the interaction energy between Gly and PPy film: ΔE = −145 kJ/mol. Selectivity and competitivity tests were investigated with the most common pesticides. This work conclusively shows that gravimetric and electrochemical results indicate that both MIP-based sensors are perfectly able to detect and distinguish glyphosate without any ambiguity.

DLLME-spectrophotometric determination of glyphosate residue in legumes

A new separation and pre-concentration method for spectrophotometric determination of glyphosate herbicide was developed. Glyphosate was converted into dithiocarbamic acid with CS2, followed by copper in the presence of ammonia to promote complex formation. This complex was collected in a CH2Cl2 organic drop and absorbance measured at 435nm. The analytical parameters, such as the amount of NH3, Cu(II) and CS2, type of extraction solutions, and the ratio of dispersive and organic liquids were optimized. The calibration curve was linear in the range 0.5-10mgl-1. The limits of detection and quantification were calculated from 3s to 10s criterions as 0.21mgl-1 and 0.70mgl-1, respectively. The developed method was applied to legume samples with the satisfactory recovery values of 98±4-102±3%.

Amine-functionalized, multi-arm star polymers: A novel platform for removing glyphosate from aqueous media

We describe a novel method for efficiently removing glyphosate from aqueous media via adsorption onto highly functionalized star-shaped polymeric particles. These particles have a polystyrene core with more than 35 attached methacrylate polymer arms, each containing a plurality of pendant amines (poly(dimethylamino ethyl methacrylate): PDMAEMA) that are partially protonated in water. Kinetic studies demonstrate that these star-polymers successfully remove up to 93% of glyphosate present in aqueous solution (feed concentration: 5 ppm), within 10 min contact time, outperforming activated carbon, which removed 33% after 20 min. On these star-polymers, glyphosate adsorption closely follows the Langmuir model indicating monolayer coverage at most. Ionic interaction between the protonated amines and glyphosate's dissociated carboxylic and phosphoric acid groups lead to effective glyphosate capture even at feed concentrations below 1 ppm. Surface charge of these star polymers and dissociation of glyphosate are both influenced by pH, thus glyphosate removal efficiency increases from 63% to 93% when pH increases from 4.2 to 7.7. NMR studies conducted with butylamine as a proxy for these polymeric particles confirm that the amine group binds with both glyphosate's carboxylic and phosphoric acid groups when its concentrations are in a 2:1 or higher molar ratio with glyphosate.

A highly selective and sensitive nanosensor for the detection of glyphosate

A turn-off fluorescence sensor synthesized by combining copper (II) oxide and multiwall carbon nanotubes (MWCNTs) were used for measuring glyphosate based on the inhibiting the catalytic activity of the CuO/MWCNTs. This sensor was synthesized by precipitating copper ions onto the acidic MWCNTs under basic conditions; the resulting material was characterized by the transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy to confirm its structure. The CuO/MWCNTs nanomaterial was found to exhibit high peroxidase-like catalytic activity toward the reduction of H2O2 to H2O and the oxidation of Amplex Red to resorufin, with a corresponding color change from pink to red and the fluorescence enhancement. However, this activity was inhibited and the fluorescence diminished when glyphosate was added to the system. Using this strategy, we applied this sensor to detect glyphosate. The results indicated that this sensor is not only highly sensitive, with a detection limit of 0.67 ppb and a linear range from 0.002 to 0.01ppm, but also exhibits good selectivity for glyphosate. When this sensor was assessed for detecting glyphosate in real water samples, recoveries of 96-107% were attained. This proposed material and method are a promising approach for rapid screening of glyphosate.

Facile, green and clean one-step synthesis of carbon dots from wool: Application as a sensor for glyphosate detection based on the inner filter effect

In this work, we reported a green route for the fabrication of fluorescent carbon dots (CDs). Wool, a kind of nontoxic and natural raw material, was chosen as the precursor to prepare CDs via a one-step microwave-assisted pyrolysis process. Compared with previously reported methods for preparation of CDs based on biomass materials, this method was simple, facile and free of any additives, such as acids, bases, or salts, which avoid the complicated post-treatment process to purify the CDs. The CDs have a high quantum yield (16.3%) and their fluorescence could be quenched by silver nanoparticles (AgNPs) based on inner filter effect (IFE). The presence of glyphosate could induce the aggregation of AgNPs and thus result in the fluorescence recovery of the quenched CDs. Based on this phenomenon, we constructed a fluorescence system (CDs/AgNPs) for determination of glyphosate. Under the optimized conditions, the fluorescence intensity of the CDs/AgNPs system was proportional to the concentration of glyphosate in the range of 0.025-2.5μgmL(-1), with a detection limit of 12ngmL(-1). Furthermore, the established method has been successfully used for glyphosate detection in the cereal samples with satisfactory results.

Potentiometric sensing of aqueous phosphate by competition assays using ion-exchanger doped-polymeric membrane electrodes as transducers

Using Zn(2+)-BPMP or Cu(2+)-BPMP as a receptor and o-mercaptophenol as an indicator, potentiometric sensing of aqueous phosphate by competition assays was achieved. With attractive features of portability, low cost and resistance to interference from turbidity and color, this sensor was successfully used for phosphate detection in biological and water samples.