Comprehensive determination of flavouring additives and nicotine in e-cigarette refill solutions. Part I: Liquid chromatography-tandem mass spectrometry analysis

A comprehensive non-targeted approach for the analysis of biomarkers in exhaled breath across different nicotine product categories

In the context of the evolving landscape of nicotine consumption, the assessment of biomarkers plays a crucial role in understanding the health impact of different product categories. Exhaled breath (EB) emerges as a promising, non-invasive matrix for biomarker analysis, complementary to conventional urine and plasma data. This study explores distinctive EB biomarker profiles among users of combustible cigarettes (CC), heated tobacco products (HTP), electronic cigarettes (EC), smokeless/oral tobacco (OT), and oral/dermal nicotine products (NRT). We have successfully developed and validated a non-targeted GC-TOF-MS method for the analysis of EB samples across the aforementioned product categories. A total of 66 compounds were identified, with significantly elevated levels in at least one study group. The study found that CC users had higher levels of established VOCs associated with smoking, which supports the proof-of-concept of the method. Breathomic analysis identified increased levels of p-cymene and α-pinene in EC users, while HTP users showed potential biomarker candidates like γ-butyrolactone. This study underscores the utility of EB biomarkers for a comprehensive evaluation of diverse nicotine products. The unique advantages offered by EB analysis position it as a valuable tool for understanding the relationship between exposure and health outcomes.

On the extension of the use of a standard operating procedure for nicotine, glycerol and propylene glycol analysis in e-liquids using mass spectrometry

INTRODUCTION

Standard operating procedures (SOP), accessible to several laboratories, are essential for product verification. EU-JATC (European-Joint Action on Tobacco Control) SOP and the WHO TobLabNet (World Health Organization Tobacco Laboratories Network) SOP (SOP11) are available standard methodologies to measure nicotine, glycerol, and propylene glycol, and propose mass spectrometer (MS) as an alternative method to flame ionization detector (FID). This study conducted a comparison between FID and MS concentration results, following the MS method described in SOP11.

METHODS

In May 2020, five test e-liquids in replicates (A-E) were prepared at the Istituto di Ricerche Farmacologiche Mario Negri and sent, with SOP 11, validation document and results datasheet to 32 different laboratories all over the world from WHO TobLabNet and EU-JATC (18 from JATC, ten from WHO TobLabNet and four academic laboratories). Among thirty-two independent laboratories that participated in the study, results were received from 30 laboratories.

RESULTS

The e-liquids analyses, using the two approaches, were compared. Of the 30 laboratories surveyed, 21 utilized the FID approach exclusively, 7 opted for MS detection, and 2 employed both methods. The findings demonstrated that the gas chromatography-mass spectrometry (GC-MS) method offers comparable analytical capabilities regarding accuracy and precision for nicotine, glycerol, and propylene glycol to the FID approach. Through Pearson's correlation test with r≃1 showing a positive correlation between GC-FID and GC-MS data, and the Student's t-test, no significant differences between the two approaches were revealed, showing p>0.005 for almost all three analytes in all samples.

CONCLUSIONS

This study indicates that it is possible to apply the available EU-JATC SOP and the WHO TobLabNet SOP11 even in laboratories that do not have access to an FID, for example, to analyze flavors, trace compounds or carcinogenic, mutagenic, or toxic for reproduction (CMR) in electronic cigarette liquids.

Chemical and physiological interactions between e-liquid constituents: cause for concern?

Studies of Electronic Nicotine Delivery Systems (ENDS) toxicity have largely focused on individual components such as flavour additives, base e-liquid ingredients (propylene glycol, glycerol), device characteristics (eg, model, components, wattage), use behaviour, etc. However, vaping involves inhalation of chemical mixtures and interactions between compounds can occur that can lead to different toxicities than toxicity of the individual components. Methods based on the additive toxicity of individual chemical components to estimate the health risks of complex mixtures can result in the overestimation or underestimation of exposure risks, since interactions between components are under-investigated. In the case of ENDS, the potential of elevated toxicity resulting from chemical reactions and interactions is enhanced due to high operating temperatures and the metallic surface of the heating element. With the recent availability of a wide range of e-liquid constituents and popularity of do-it-yourself creation of e-liquid mixtures, the need to understand chemical and physiological impacts of chemical combinations in ENDS e-liquids and aerosols is immediate. There is a significant current knowledge gap concerning how specific combinations of ENDS chemical ingredients result in synergistic or antagonistic interactions. This commentary aims to review the current understanding of chemical reactions between e-liquid components, interactions between additives, chemical reactions that occur during vaping and aerosol properties and biomolecular interactions, all of which may impact physiological health.

Constructed electron-dense Mn sites in nitrogen-doped Mn3O4 for efficient catalytic ozonation of pyrazines: Degradation and odor elimination

In this study, N-doped Mn3O4 catalysts (Mn-nN) with electron-dense Mn sites were synthesized and employed in heterogeneous catalytic ozonation (HCO). These catalysts demonstrated excellent performance in pyrazines degradation and odor elimination. The synthesis of Mn-nN was achieved through a facile urea-assisted heat treatment method. Experimental characterization and theoretical analyses revealed that the MnN structures in Mn-nN, played a crucial role in facilitating the formation of electron-dense Mn sites that served as the primary active sites for ozone activation. In particular, Mn-1N exhibited excellent performance in the HCO system, demonstrating the highest 2,5-dimethylpyrazine (2,5-DMP) degradation efficiency. •OH was confirmed as the primary reactive oxygen species involved in the HCO process. The second-order rate constants for 2,5-DMP degradation with O3 and •OH, were determined to be (3.75 ± 0.018) × 10-1 and (6.29 ± 0.844) × 109 M-1 s-1, respectively. Seventeen intermediates were identified through GC-MS analysis during the degradation of 2,5-DMP via HCO process with Mn-1N. The degradation pathways were subsequently proposed by considering these identified intermediates. This study introduces a novel approach to synthesize N-doped Mn3O4 catalysts and demonstrates their efficacy in HCO for the degradation of pyrazines and the elimination of associated odors. The results show that the catalysts are promising for addressing odor-related environmental issues and provide valuable insights about the broader significance of catalytic ozonation processes.

Profiling flavourings in strawberry-flavoured e-liquid using headspace-gas chromatography-mass spectrometry

E-liquids typically contain nicotine and flavourings in a matrix of propylene glycol (PG) and vegetable glycerine (VG). Some nicotine-free e-liquids are flavouring only in the aerosol carrier with the option for users to add their own nicotine. It is only the nicotine that is monitored in terms of level, as specified by the manufacturers. Little is known of the toxicological effect for some of the flavourings in the context of vaping as these are only regulated for ingestion and not inhalation. A method was developed to analyse volatile organic compounds (VOCs) evolved when e-liquids are vaporised based on headspace-gas chromatography-mass spectrometry (HS-GC-MS) for e-liquids. An in-house standard was prepared with sample matrix and purchased strawberry flavouring to simulate a simple e-liquid but with known levels. This standard was then used to optimise the analysis for use with e-liquid samples but not for full quantification purposes. These were purchased from a range of retailers and with different batches but mainly focussed on strawberry flavour. The results identified three key components indicative of strawberry flavour (ethyl-3-methyl butanoate, ethyl 2-methyl butanoate and ethyl butanoate) and showed considerable variation between both manufacturers and batches. Flavouring VOCs are regulated for ingestion but are not regulated for e-liquid inhalation, so these could have toxicological implications. In addition, the inconsistency between samples suggests further issues when users add their own nicotine to the e-liquids as the viscous sample matrix makes homogeneous mixing difficult.

Making Every Single Puff Count-Simple and Sensitive E-Cigarette Aerosol Sampling for GCxIMS and GC-MS Analysis

The analysis of the aerosol from tobaccoless electronic cigarettes (e-cigarettes) is an important part of understanding their impact on human health, yet sampling aerosol from e-cigarettes is still considered a challenge. It lacks a standard method for research and quality control and there are a variety of methods. However, few are simple and inexpensive, and none have been suggested for the use with gas chromatography coupled ion mobility spectrometry (GCxIMS). This work presents and evaluates such a setup made from standard lab equipment to quickly collect a quantitative sample from the aerosol of a single puff (5 s totaling 125 mL). The aerosol condensates directly in the cooled headspace (HS) vial, which is analyzed in the HS-GCxIMS or mass spectrometer (HS-GC-MS). The combined use of GC-MS and GCxIMS allows the simple and sensitive identification of unknown substances in complex mixtures and the identification of degradation products in the aerosols. A calibration of 26 flavor compounds (0.2-20 µg/g) was created using single puffs of a spiked, flavorless commercial refill solution and 2-alkanones as internal standards. This sensitive but easily reproducible setup enables a wide range of further investigations, even for labs that were previously unable to afford it.

A Wide Range of Flavoring-Carrier Fluid Adducts Form in E-Cigarette Liquids

A range of flavoring molecules are used in electronic cigarette liquids (e-liquids), some of which have been shown to form cyclic acetal adducts with e-liquid solvent components propylene glycol (PG) and vegetable glycerine (VG). The objective of this study was to identify the range of flavoring molecules which form adducts in e-liquid products. Common e-liquid flavoring molecules (N = 36) from a range of chemical class groups were exposed to PG, VG, or methanol and analyzed by GC-MS over a time frame of 4 weeks to identify possible reaction products. Adduct formation was observed, with 14 of the flavoring molecules reacting with methanol, 10 reacting with PG, and 10 reacting with VG. Furfural PG and VG acetals, valeraldehyde PG and VG acetals, veretraldehyde PG and VG acetals, p-anisaldehyde PG and VG acetals, and piperonal VG acetal were confirmed for the first time. Adducts formed by reaction with ketone-containing flavoring molecules were also observed for the first time. The presence of these acetals was confirmed in 32% of commercial e-liquid products analyzed (N = 142). This study has established a range of flavoring molecules which are able to react with solvent components PG and VG in e-liquids under standard storage conditions. These newly identified adducts need to be further assessed to determine their toxicological safety.

Electromembrane extraction of nicotine in inhaled aerosols from tobacco cigarettes, electronic cigarettes, and heated tobacco products

Heated tobacco products and electronic cigarettes are considered as alternatives to traditional tobacco cigarettes. However, it is crucial to monitor and compare the nicotine concentration in inhaled aerosols from these tobacco products, owing to the addictive nature and adverse effects of nicotine on human health. This study aimed to provide an electromembrane extraction (EME) combined liquid chromatography method to extract and determine nicotine in different inhaled aerosols. EME showed high extraction efficiency, selectivity, and sample clean-up capability. Under the optimal parameters, the linear range for nicotine was 0.1-200 mg L^-1 (r² > 0.9998), and the limit of detection was 0.02 mg L^-1. Good precision was obtained with the intra- and inter-day relative standard deviations of 2.2 % and 2.8 %, respectively. Repeatability was satisfactory (<7.7 %), and recoveries ranged from 81.0 % to 112.8 %. Finally, this method has been successfully used for the determination and comparison of nicotine in aerosols from these three tobacco products.

Effects of tobacco smoke on indoor air quality: the use of mosses in biomonitoring

This research was carried out to assess the possibility of using Pleurozium schreberi mosses as bioindicators of atmospheric aerosol pollution in living quarters (kitchen and bedroom), with metals originating from tobacco smoke from various types of cigarettes: conventional cigarettes, e-cigarettes and heated tobacco products. The moss-bag method of active biomonitoring was used. The mosses were exposed in these indoor spaces for three months and, after the exposition period, their analytes - Ni, Cu, Zn, Cd and Pb - were determined using flame atomic absorption spectrometry (F-AAS). Results were interpreted using the relative accumulation factors (RAF), coefficients of variation (CV) and the Wilcoxon test. As a result of the research, it was found that there were statistically significant differences in Zn and Cd concentrations in tobacco smoke from different types of cigarettes. The analyses showed that heated tobacco products contaminate indoor air with metals, similar to conventional cigarettes and e-cigarettes. It was demonstrated that the reliability of biomonitoring results was affected, for example, by the method of preparation of bioindicator samples, such as mosses.

Progress in quantification of nicotine content and form distribution in electronic cigarette liquids and aerosols

Each electronic cigarette (e-cigarette) is a battery-powered system which converts electronic cigarette liquids (e-liquids) into the inhalable phase by heating the solution when it is in use. After four generations of development, e-cigarettes tend to be more customized and user-operable. The main components in the e-liquid and the aerosol are vegetable glycerin, propylene glycol, nicotine, organic acid and some flavor ingredients. Among them, nicotine is closely associated with the irritation and physiological satisfaction caused by tobacco products, and it is the core functional substance of e-cigarettes. For this reason, the quantification of nicotine content and nicotine form distribution mainly focuses on the components of the e-liquid and the released aerosol. Up to now, various technologies and methods have been applied in the analysis and research of nicotine content and nicotine form distribution in the e-liquid and its aerosol. GC-MS is often used as the most viable tool for the analysis of volatile organic compounds and can be widely applied in the measurement of nicotine related chemicals; there are a number of quantitation strategies using LC-MS, LC-MS/MS or ¹H NMR for the analysis of e-cigarette samples. We also reviewed the four main methods for determining the distribution of nicotine forms, which are pH value derivation, solvent extraction, SPME and NMR methods. These research methods are of great significance to the upgrading and development of e-cigarette products.

Nicotine in Complex Samples: Recent Updates on the Pretreatment and Analysis Method

Nicotine is a significant evaluation index of tobacco and its related products' quality, but nicotine overdose can pose serious health hazards and cause addiction and dependence, thus it can be seen that it is necessary to find suitable and efficient detection methods to precisely detect nicotine in diverse samples and complex matrices. In this review, an updated summary of the latest trends in pretreatment and analytical techniques for nicotine is provided. We reviewed various sample pretreatment methods, such as solid phase extraction, solid phase microextraction, liquid phase microextraction, QuEChERS, etc., and diverse nicotine assay methods including liquid chromatography, gas chromatography, electrochemical sensors, etc., focusing on the developments since 2015. Furthermore, the recent progress in the applications and applicability of these techniques as well as our prospects for future developments are discussed.HighlightsUpdated pretreatment and analysis methods of nicotine were systematically summarized.Microextraction and automation were main development trends of nicotine pretreatment.The introduction of novel materials added luster to nicotine pretreatment.The evolutions of ion source and mass analyzer were emphasized.

Open Characterization of Vaping Liquids in Canada: Chemical Profiles and Trends

Currently, there is a lack of comprehensive data on the diversity of chemicals present in vaping liquids. To address this gap, a non-targeted analysis of 825 vaping liquids collected between 2017 and 2019 from Canadian retailers was conducted. Prior to mass spectrometry analysis, samples were diluted 1:500 v/v with methanol or acetonitrile. Chemical compound separation and analysis was carried out using gas chromatography and triple quadrupole mass spectrometry (GC-MS/MS) systems operated in the full scan mode and mass range of 35-450 m/z. Mass spectrum for each sample was obtained in electron ionization at 70 eV and processed. Non-targeted identification workflow included use of automated mass spectral deconvolution and identification system (AMDIS), where required, as well as a number of commercially available spectral libraries. In order to validate identities, an in-house database of expected compounds previously detected in vaping liquids was used along with genuine analytical standards for compounds of interest. This resulted in a dataset of over 1,500 unique detected chemicals. Approximately half of these chemical compounds were detected only once in a single product and not in multiple products analyzed. For any sample analyzed, on average, 40% of the chemical constituents appeared to have flavouring properties. The remainder were nicotine and related alkaloids, processing, degradation or indirect additives, natural extractives and compounds with unknown roles. Data published here from the project on the Open Characterization of vaping liquids is unique as it offers a detailed understanding of products' flavour chemical profiles, the presence and frequency of chemicals of potential health concern, as well as trends and changes in products' chemical complexity over a three-year period. Non-targeted chemical surveillance such as this present valuable tools to public health officials and researchers in responding to emergent issues such as vaping associated lung injury or informing chemical based strategies which may be aimed at addressing product safety or appeal.

Confined DART-MS for Rapid Chemical Analysis of Electronic Cigarette Aerosols and Spiked Drugs

A confined direct analysis in a real time mass spectrometry (DART-MS) system and method were developed for coupling directly with commercial electronic cigarettes for rapid analysis without sample preparation. The system consisted of a confining heated glass T-junction, DART ionization source, and Vapur interface to assist aerodynamic transport. Suction generated by positioning the electronic cigarette at the junction inlet allowed for direct chemical analysis of aerosolized electronic liquids from both automatic devices powered by drag and manual button-operated devices, which is unachievable with traditional DART-MS. Parametric analyses for the system investigated Vapur suction flow rate, junction heating, puff duration, and coil power levels. Using this method, rapid chemical analyses of electronic cigarette aerosols from electronic liquids, spiked illicit drugs, and polymeric or plasticizer contaminants were performed in <30 s. The confined DART-MS method provides a streamlined tool for rapid screening of illicit and hazardous chemical profiles emitting from electronic cigarettes.

Development of a “Freeze-Pour” Sample Preparation Method for the GC Analysis of Semivolatile Flavouring Chemicals Present in E-cigarette Refill Liquids

During the past decade, e-cigarettes have become increasingly popular. To guarantee their safe use and to comply with the notification requirements of the EU Tobacco Product Directive, the EU member state regulatory authorities need information about the exact composition of the e-liquids and their emissions. However, one of the challenges encountered during the analysis of e-liquids is the presence of the highly abundant e-liquid matrix components propylene glycol and glycerol. In this study, headspace gas chromatography (HS-GC) analysis is presented as an excellent method for the analysis of high volatile components in e-liquids. For the analysis of semivolatile ingredients, an additional sample preparation step is proposed based on a liquid–liquid extraction (LLE) followed by a freeze-out of the matrix components. The developed method was successfully validated in accordance with the validation requirements of ICH guidelines for the quantification of four flavourings with a potential health concern for e-cigarette users.

Headspace analysis of E-cigarette fluids using comprehensive two dimensional GC×GC-TOF-MS reveals the presence of volatile and toxic compounds

The analysis of electronic cigarrete (E-cigarette) fluids by high performance liquid chromatography or gas chromatography (GC) coupled to mass spectrometry (MS), GC hyphenated to flame-ionisation detection, or nuclear magnetic resonance spectroscopy poses many challenges due to the complex matrix and extremely high number of compounds present. In order to overcome these challenges, this study focused on the detection of the multiple complex compounds classes produced by the pyrolysis of E-cigarette liquids using comprehensive two dimensional gas chromatography (GCxGC) coupled to time of flight (TOF)-MS. Gas samples were prepared by heating E-liquids inside aluminium tins for 5 min. The tins were placed in a sand bath, which was temperature controlled at 200 °C. The samples were collected using thermal desorption tubes connected to volatile organic compound (VOC) sampling pump attached and subsequently analysed using GCxGC-TOF-MS. The greater peak resolution obtained when using GCxGC-TOF-MS allowed to distinguish many toxic compounds and VOCs that could not be detected by the other methods mentioned above. As a result, a comprehensive list of volatile compounds emitted from E-cigarette fluids when heated was established, which might allow a better understanding of potential health effects of vaping. Heating E-liquids to moderate temperature results in the emission of over 1000 volatile compounds of which over 150 are toxic. These compounds are either present in the liquid or can be formed during storage or heating leading to a more complex volatile profile of E-cigarette liquids than previously assumed. The application of GCxGC-TOF-MS allows the elucidation of this profile and therefore a better understanding of possible health implications.

Flavor-Toxicant Correlation in E-cigarettes: A Meta-Analysis

Flavors in electronic cigarette (ECIG) liquids may increase ECIG aerosol toxicity via intact distillation or chemical transformation. For this report, we performed a meta-analysis of the literature to categorize the compounds found in flavored ECIG liquids into a few chemical classes and to predict their possible chemical transformations upon ECIG liquid aerosolization. This analysis allowed us to propose specific correlations between flavoring chemicals and aerosol toxicants. A literature search was conducted in November 2019 using PubMed. Keywords included terms related to ECIGs and flavors. Studies were included if they reported chemical ingredients of flavored liquids and clearly stated the commercial names of these liquids. The obtained data were visualized on a network diagram to show the common chemical compounds identified in flavored ECIG liquids and categorize them into different chemical classes. The systematic literature review included a total of 11 articles. Analysis of the data reported gave a total of 189 flavored liquids and 173 distinct chemical compounds that were categorized into 22 chemical classes according to their functional groups. The subsequent prediction of chemical transformations of these functional groups highlighted the possible correlation of flavor compounds to aerosol toxicants.

Method Validation Approaches for Analysis of Constituents in ENDS

OBJECTIVE

We assessed how many peer-reviewed publications reporting chemical quantities and/or yields from electronic nicotine delivery systems (ENDS) have included adequate method validation characteristics in the publication for appropriate interpretation of data quality for informing tobacco regulatory science.

METHODS

We searched 5 databases (Web of Knowledge, PubMed, SciFinder, Embase, EBSCOhost) for ENDS publications between January 2007 and September 2018. Of the 283 publications screened, 173 publications were relevant for analysis. We identified the publications that report a certain degree of control in data quality, ie, the publications that report marginally validated methods (MVMs). MVMs refer to the methods that: (1) report 3 or more International Conference on Harmonisation (ICH) method validation characteristics, (2) state the method was validated, (3) cite their own previous publication(s) that report MVMs, or (4) use a method within the accreditation scope of an accredited laboratory.

RESULTS

Overall, 97 publications (56%) report MVMs in their studies. This percentage also reflects the publication distribution for the majority of the 28 chemicals measured by MVMs.

CONCLUSIONS

This study highlights the need for reporting sufficient validation characteristics following appropriate guidance to ensure the accuracy and reliability of the published analytical data for proper data interpretations that may support policy.

A facile approach for rapid on-site screening of nicotine in natural tobacco

Nicotine (Nic) exposed to the environment which comes from tobacco products is the main addictive agent and specific classes of hazardous compound that merit concern. In this study, we have established a fast and reliable method to achieve specific detection of Nic in natural nicotiana tabacum within 30 s through a miniaturized platform based on screen printed gold electrode (SPE). A simple electrochemical pretreatment mean was employed on gold surface that led to the exposure of Au (111) facet and a convenient sample pretreatment method was adopted to realize the extraction of Nic in tobacco. The present electrochemical sensor exhibits an ample range of sensing from 10 μg/g to 200 μg/g, which is able to compliance with tobacco industry testing standards of actual samples. Over 60 sampling points from different origins in China or other countries were performed with direct analysis using this method and satisfactory results have been obtained. The proposed approach was demonstrated to be a very promising platform for significantly improving analytical efficiency in laboratories as well as for monitoring the source reduction control of Nic in the environment.

An Analytical Perspective on Determination of Free Base Nicotine in E-Liquids

In electronic cigarette users, nicotine delivery to lungs depends on various factors. One of the important factors is e-liquid nicotine concentration. Nicotine concentration in e-liquids ranges from 0 to >50 mg/mL. Furthermore, nicotine exists in protonated and unprotonated ("free base") forms. The two forms are believed to affect the nicotine absorption in body. Therefore, in addition to total nicotine concentration, e-liquids should be characterized for their free base nicotine yield. Two approaches are being used for the determination of free base nicotine in e-liquids. The first is applying a dilution to e-liquids followed by two methods: Henderson-Hasselbalch theory application or a Liquid-Liquid Extraction. The second is the without-dilution approach followed by 1H NMR method. Here, we carried out controlled experiments using five e-liquids of different flavors using these two approaches. In the dilution approach, the Henderson-Hasselbalch method was tested using potentiometric titration. The accuracy was found to be >98% for all five e-liquid samples (n = 3). A Liquid-Liquid Extraction was carried out using toluene or hexane as extraction solvent. The Liquid-Liquid Extraction technique was found to be limited by solvent interactions with flavors. Solvent extractions resulted in flavor dependent inaccuracies in free base nicotine determination (5 to 277% of calculated values). The without-dilution approach was carried out using 1H NMR as described by Duell et al. This approach is proposed to offer an independent and alternative scale. None of the methods have established a strong correlation between pre- and postvaporization free base nicotine yield. Here we present comparative results of two approaches using analytical techniques. Such a comparison would be helpful in establishing a standardized method for free base nicotine determination of e-liquids.

Stabilities of bisphenol A diglycidyl ether, bisphenol F diglycidyl ether, and their derivatives under controlled conditions analyzed using liquid chromatography coupled with tandem mass spectrometry

Bisphenol A diglycidyl ether (BADGE), bisphenol F diglycydyl ether (BFDGE), and their related compounds are widely used as precursors in production of epoxy resins. The high reactivity of these compounds makes the development of analytical methodologies that ensure appropriate metrological accuracy crucial. Consequently, we aimed to determine whether and to what extent the composition of the solution and storage conditions affect the stability of selected BADGE and BFDGE derivatives. The stabilities of these compounds were studied using liquid chromatography–tandem mass spectrometry with electrospray ionization (HPLC-ESI–MS/MS). The chromatographic method elaborated here has allowed for separation of the analytes in time shorter than 6 min, for both methanol and acetonitrile-based mobile phases. The obtained calibration curves for all analytes were linear in the range tested. The values of limit of detection (LODs) were in the range of 0.91–2.7 ng/mL, while values of limit of quantitation (LOQs) were in the range of 2.7–5.7 ng/mL. The chosen experimental conditions were compared in terms of the content of organic solvent in solution, storage temperature, and time. Our results show that the content of BADGE, BADGE·HCl, BFDGE, three-ring NOGE decreased with increasing water content (> 40% v/v). For BADGE and three-ring NOGE, significant changes in concentration were noted as early as 24 h after the test solutions had been prepared. In addition, a reduction in the storage temperature (4 to − 20 °C) reduced the rate of transformation of the monitored analytes. Our study will increase quality control in future research and may increase the reliability of the obtained results.

New approach for e-cigarette aerosol collection by an original automatic aerosol generator utilizing melt-blown non-woven fabric

Currently, there is lack of standardized conditions for the collection and analysis of e-cigarette (EC) aerosol. Considering the urgent need for the development of these guidelines, a procedure for EC aerosol analysis was developed. A novel automatic e-cigarette aerosol generator was designed. For the first time, melt-blown non-woven fabric was applied for the effective uptake of compounds released from vaporized e-liquid. The extraction procedure was optimized in terms of type of extraction solvent, amount of sorbent and solvent volume. For optimization, a model e-liquid containing flavour additives belonging to various chemicals group with various chemical properties was investigated. The aerosol trapping efficiency was satisfactory and was equal to 92 ± 7%. Final determination was performed by GC-MS/MS. Quantitation was based on the mass change tracking approach (MCT), which assumes the monitoring of e-liquid mass changes before and after vaping. The combination of non-woven fabric and sampling approach (MCT) was proven to be effective in acquisition of reliable data. Thus, the concentrations in aerosol and emission factors were calculated for aerosols collected during the vaping of both model e-liquids and real samples. Validation was performed by evaluating key analytical parameters, such as linearity, accuracy, precision, limit of detection (LOD) and quantitation (LOQ). For all investigated compounds, recoveries from 70% to 118% together with precision and reproducibility below 12% were achieved. The applicability of the described approach was examined by analysing EC refill solutions commercially available on the Polish market.

A Standardized Approach to Quantitative Analysis of Nicotine in e-Liquids Based on Peak Purity Criteria Using High-Performance Liquid Chromatography

The use of electronic cigarettes (e-cigarettes) is a growing trend in population. E-cigarettes are evolving at a rapid rate with variety of battery powered devices and combustible nicotine refills such as e-liquids. In contrast to conventional cigarettes which are studied well for their toxicity and health effects, long-term clinical data on e-cigarettes are not available yet. Therefore, safety of e-cigarettes is still a major concern. Although the Food and Drug Administration (FDA) has recently started regulating e-cigarette products, no limits on nicotine and other ingredients in such products have been proposed. Considering the regulatory requirements, it is critical that reliable and standardized analytical methods for analyzing nicotine and other ingredients in e-cigarette products such as e-liquids are available. Here, we are reporting a fully validated high-performance liquid chromatography (HPLC) method based on nicotine peak purity for accurately quantifying nicotine in various e-liquids. The method has been validated as per ICH Q2(R1) and USP <1225> guidelines. The method is specific, precise, accurate, and linear to analyze nicotine in e-liquids with 1 to >50 mg/mL of nicotine. Additionally, the method has been proven robust and flexible for parameters such as change in flow rate, column oven temperature, and organic phase composition, which proves applicability of the method over wide variety of e-liquids in market.

Evaluation of flavour profiles in e-cigarette refill solutions using gas chromatography-tandem mass spectrometry

Many flavour compounds that are present in e-liquids for e-cigarettes are responsible for specific tastes and smoking sensations for users. Data concerning content and specific types of flavours is often limited and unknown to users. The aim of the research was to define and compare flavour profiles of e-liquids with the same group taste from different manufacturers. Gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) was used to separate and identify 90 popular compounds (98, including isomers) of interest. The developed method was validated in terms of accuracy (88-113%) for three spiking levels and the intra-day (0.2-13%) and inter-day precision (1-10%). Limits of quantitation were in the range of 10-816 ng/mL, while the matrix effects for 80% of the compounds were at negligible levels. The proposed method is rapid, simple and reliable and uses a green and modern GC-MS/MS technique. Twenty-five samples of five different flavours (tobacco, strawberry, cherry, menthol and apple) from five different producers were analysed, and the determined compounds were categorized and differentiated. The approach proposed in this study allowed for the evaluation of which compounds/group of compounds are responsible for taste and to distinguish common flavour compounds among the investigated brands for each flavour. Furthermore, the presented research can be considered in future toxicological studies.