Analysis of Environmental Protection Agency priority endocrine disruptor hormones and bisphenol A in tap, surface and wastewater by online concentration liquid chromatography tandem mass spectrometry

Determination of nine bisphenol analogues in human urine by high-throughput solid-phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry analysis

Bisphenol analogues (BPs) are a class of typical environmental endocrine-disrupting chemicals (EDCs). This study aimed to establish a highly sensitive and high-throughput method utilizing 96-well solid-phase extraction (96-well SPE) in conjunction with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) employing multiple reaction monitoring (MRM), information-dependent acquisition (IDA), and enhanced product ion (EPI) scan modes for the identification and quantitative analysis of nine BPs in human urine. Urine samples were initially thawed to room temperature, followed by digestion using β-glucuronidase in an ammonium acetate buffer solution at 37 °C overnight. Subsequently, they were purified using 96-well SPE and finally analyzed by UHPLC-MS/MS. The limits of detection (LOD) for the nine BPs ranged from 0.05 μg∙kg-1 to 0.3 μg kg-1. Average recoveries fell within the range of 92.8 % to 111.7 %. Moreover, both the intra-day and inter-day precisions were satisfactory, with relative standard deviations (RSDs) ranging from 2.2 % to 6.7 % and 3.5 % to 6.3 %, respectively. The targets in the samples exhibited a perfect match, with a purity fit value exceeding 70 % from the self-built library. The analytical method developed in this study demonstrates high accuracy and sensitivity. In addition, the MRM-IDA-EPI mode can effectively identifies the target BPs and prevents false positive detection of analytes in the urine.

Summary recommendations on "Analytical methods for substances in the Watch List under the Water Framework Directive"

The Watch List (WL) is a monitoring program under the European Water Framework Directive (WFD) to obtain high-quality Union-wide monitoring data on potential water pollutants for which scarce monitoring data or data of insufficient quality are available. The main purpose of the WL data collection is to determine if the substances pose a risk to the aquatic environment at EU level and subsequently to decide whether a threshold, the Environmental Quality Standards (EQS) should be set for them and, potentially to be listed as priority substance in the WFD. The first WL was established in 2015 and contained 10 individual or groups of substances while the 4th WL was launched in 2022. The results of monitoring the substances of the first WL showed that some countries had difficulties to reach an analytical Limit of Quantification (LOQ) below or equal to the Predicted No-Effect Concentrations (PNEC) or EQS. The Joint Research Centre (JRC) of the European Commission (EC) organised a series of workshops to support the EU Member States (MS) and their activities under the WFD. Sharing the knowledge among the Member States on the analytical methods is important to deliver good data quality. The outcome and the discussion engaged with the experts are described in this paper, and in addition a literature review of the most important publications on the analysis of 17-alpha-ethinylestradiol (EE2), amoxicillin, ciprofloxacin, metaflumizone, fipronil, metformin, and guanylurea from the last years is presented.

Tracking down pharmaceutical pollution in surface waters of the St. Lawrence River and its major tributaries

A reconnaissance survey was undertaken to evaluate the occurrence and risks of 27 pharmaceuticals and metabolites in the St. Lawrence watershed. Surface water samples were collected over a five-year period (2017-2021) along a 700-km reach of the St. Lawrence River as well as 55 tributary rivers (overall N = 406 samples). Additionally, depth water samples and sediments were collected near a major wastewater effluent. Caffeine, diclofenac, and venlafaxine were the most recurrent substances (detection rates >80 %), and extremely high levels were found near a municipal effluent (e.g., ibuprofen (860 ng/L), hydroxyibuprofen (1800 ng/L) and caffeine (7200 ng/L)). Geographical mapping and statistical analyses indicated that the St. Lawrence River water mass after the Montreal City effluent was significantly more contaminated than the other water masses, and that contamination could extend up to 70 km further downstream. This phenomenon was repeatedly observed over the five years of sampling, confirming that this is not a random trend. A slight increase in contamination was also observed near Quebec City, but concentrations rapidly declined in the estuarine transition zone. Tributaries with the highest pharmaceutical levels (ΣPharmas ∼400-900 ng/L) included the Mascouche, Saint-Régis, and Bertrand rivers, all located in the densely populated Greater Montreal area. When flowrate was factored in, the top five tributaries in terms of mass load (ΣPharmas ∼200-2000 kg/year) were the Des Prairies, Saint-François, Richelieu, Ottawa, and Yamaska rivers. All samples met the Canadian Water Quality Guideline for carbamazepine. Despite the large dilution effect of the St. Lawrence River, a risk quotient approach based on freshwater PNEC values suggested that four compounds (caffeine, carbamazepine, diclofenac, and ibuprofen) could present intermediate to high risks for aquatic organisms in terms of chronic exposure.

Development of a column switching for direct online enrichment and separation of polar and nonpolar analytes from aqueous matrices

Trace substances in surface waters may threaten health and pose a risk for the aquatic environment. Moreover, separation and detection by instrumental analysis is challenging due to the low concentration and the wide range of polarities. Separation of polar and nonpolar analytes can be achieved by using stationary phases with different selectivity. Lower limits of detection of trace substances can be obtained by offline enrichment on solid phase materials. However, these practices require substantial effort and are time consuming and costly. Therefore, in this study, a column switching was developed to enrich and separate both polar and nonpolar analytes by an on-column large volume injection of aqueous samples. The column switching can significantly reduce the effort and time for analyzing trace substances without compromising on separation and detection. A reversed phase (RP) column is used to trap the nonpolar analytes. The polar analytes are enriched on a porous graphitized carbon column (PGC) coupled serially behind the RP column. A novel valve switching system is implemented to enable elution of the nonpolar analytes from the RP column and, subsequently, elution of polar analytes from the PGC column and separation on a hydrophilic interaction liquid chromatography (HILIC) column. To enable separation of polar analytes dissolved in an aqueous matrix by HILIC, the water plug that is flushed from the PGC column is diluted by dosing organic solvent directly upstream of the HILIC column. The developed method was tested by applying target analysis and non-target screening, highlighting the advantage to effectively separate and detect both polar and nonpolar compounds in a single chromatographic run. In the target analysis, the analytes, with a logD at pH 3 ranging from -2.8 to + 4.5, could be enriched and separated. Besides the 965 features in the RP phase, 572 features from real wastewater were observed in the HILIC phase which would otherwise elute in the void time in conventional one-dimensional RP methods.

Development of a trace quantitative method to investigate caffeine distribution in the Yellow and Bohai Seas, China, and assessment of its potential neurotoxic effect on fish larvae

Caffeine is an emerging contaminant in aquatic environments. The study utilized a validated method to investigate the presence and distribution of caffeine in the surface water of the Yellow and Bohai Seas, urban rivers, and the Yantai estuary area. The analytical method conforms to EPA guidelines and exhibits a limit of quantification that is 200 times lower than that of prior investigations. The study revealed that the highest concentration of 1436.4 ng/L was found in convergence of ocean currents in the Yellow and Bohai Seas. The presence of larger populations and the process of urban industrialization have been observed to result in elevated levels of caffeine in offshore regions, confirming that caffeine can serve as a potential indicator of anthropogenic contamination. Fish larvae exhibited hypoactivity in response to caffeine exposure at environmentally relevant concentrations. The study revealed that caffeine pollution can have adverse effects on marine and offshore ecosystems. This emphasizes the importance of decreasing neurotoxic pollution in the aquatic environment.

Magnetic Rubber@ magnesium aluminum layered double hydroxide as nanostructured sorbent; application in determination of estrogenic hormones and bisphenol A

A magnetic solid-phase extraction (MSPE) method was developed for the enrichment of trace amounts of estrone (E1), 17-β-estradiol (E2) and bisphenol A (BPA) from aqueous samples using the Rubber-Fe3O4@SiO2@Mg-Al Layered double hydroxide followed by determination by HPLC. The proposed sorbent was characterized by X-ray diffraction, Field emission scanning electron microscopy, Fourier transform infrared spectroscopy, Vibrating-sample magnetometer, Thermal gravimetric analysis, N2 adsorption/desorption Brunauer-Emmett-Teller surface analysis, Barrett-Joyner-Halenda pore size analysis and Energy dispersive X-ray spectroscopy. Factors affecting the extraction efficiency such as pH, ionic strength, extraction temperature and time, desorption solvent and time were optimized. The limit of detection and quantification were obtained as 0.33, 1 µg L-1 for the E1 and E2 and BPA, respectively. Also, linear range of the method were 1-150, 1-100 and 1-150 µg L-1for E1, E2, and BPA, respectively. Relative standard deviations (RSD%) for the repeatability of extraction on one sorbent were obtained as 2.98, 1.31 and 3.50%, also, sorbent to sorbent repeatability were investigated and RSD% values were obtained as 7.58, 8.35 and 8.12% for E1, E2 and BPA, respectively.

A robust multi-residue method for the monitoring of 25 endocrine disruptors at ultra-trace levels in surface waters by SPE-LC-MS/MS

Estrogenic endocrine disruptors are one of the biggest ecotoxicological threats in water that pose a significant ecological burden and health-risk for humans due to their high biological activity and proven additive effects. Therefore, we have developed and validated the most comprehensive and ultra-sensitive analytical method published to date, for reliable quantification of 25 high-risk endocrine disruptors at their ecologically relevant concentrations: naturally excreted hormones (estradiol, estrone, estriol, testosterone, corticosterone, and progesterone), synthetic hormones used for contraception and menopausal symptoms (ethinylestradiol, drospirenone, chlormadinone acetate, norgestrel, gestodene, tibolone, norethindrone, dienogest, and cyproterone) and bisphenols (BPS, BPA, BPF, BPE, BPAF, BPB, BPC, and BPZ). It is based on a solid-phase extraction of water samples, followed by a robust dansyl chloride derivatization with detection by liquid chromatography-tandem mass spectrometry with a single sample preparation and two analytical methods using the same analytical column and mobile phases. The achieved limits of quantitation are in the sub-ng L^-1 range, and detection limits as low as 0.02 ng L^-1, meeting the newest proposal for environmental quality standards (EQS) by the EU water framework directive for estradiol and ethinylestradiol. The method was extensively validated and applied to seven representative Slovenian water samples, where we detected 21 out of 25 analytes; 13 were quantified in at least one sample. Estrone and progesterone were quantified in all samples, reaching levels up to 50 ng L^-1; ethinylestradiol was higher than the current EQS (0.035 ng L^-1) in three samples, and estradiol was above its EQS (0.4 ng L^-1) in one sample, proving the method's applicability and the necessity for monitoring these pollutants.

Validation of an isotope dilution mass spectrometry (IDMS) measurement procedure for the reliable quantification of steroid hormones in waters

Reliable data are compulsory to efficiently monitor pollutants in aquatic environments, particularly steroid hormones that can exert harmful effects at challenging analytical levels below the ng L^-1. An isotope dilution two-step solid-phase extraction followed by an ultra-performance liquid chromatography separation coupled to tandem mass spectrometry (UPLC-MS/MS) detection method was validated for the quantification of 21 steroid hormones (androgens, estrogens, glucocorticoids, and progestogens) in whole waters. To achieve a realistic and robust assessment of the performances of this method, the validation procedure was conducted using several water samples representative of its intended application. These samples were characterized in terms of concentration of ionic constituents, suspended particulate matter (SPM), and dissolved organic carbon contents (DOC). For estrogens that are part of the European Water Framework Directive Watchlist (17beta-estradiol and estrone), the performances met the European requirements (decision 2015/495/EU) in terms of limit of quantification (LQ) and measurement uncertainty. For 17alpha-ethinylestradiol, the challenging LQ of 0.035 ng L^-1 was reached. More generally, for 15 compounds out of 21, the accuracy, evaluated in intermediate precision conditions at concentrations ranging between 0.1 and 10 ng L^-1, was found to be within a 35% tolerance. The evaluation of the measurement uncertainty was realized following the Guide to the expression of Uncertainty in Measurement. Finally, a water monitoring survey demonstrated the suitability of the method and pointed out the contamination of Belgium rivers by five estrogens (17alpha-ethinylestradiol, estriol, 17alpha-estradiol, 17beta-estradiol, and estrone) and three glucocorticoids (betamethasone, cortisol, and cortisone) which have been up to now poorly documented in European rivers.

Recent Trends in Multiclass Analysis of Emerging Endocrine Disrupting Contaminants (EDCs) in Drinking Water

Ingestion of water is a major route of human exposure to environmental contaminants. There have been numerous studies exploring the different compounds present in drinking water, with recent attention drawn to a new class of emerging contaminants: endocrine-disrupting compounds (EDCs). EDCs encompass a broad range of physio-chemically diverse compounds; from naturally occurring to manmade. Environmentally, EDCs are found as mixtures containing multiple classes at trace amounts. Human exposure to EDCs, even at low concentrations, is known to lead to adverse health effects. Therefore, the ability to evaluate EDC contamination with a high degree of sensitivity and accuracy is of the utmost importance. This review includes (i) discussion on the perceived and actual risks associated with EDC exposure (ii) regulatory actions that look to limit EDC contamination (iii) analytical methods, including sample preparation, instrumentation and bioassays that have been advanced and employed for multiclass EDC identification and quantitation.

Suspect screening of pharmaceuticals, illicit drugs, pesticides, and other emerging contaminants in Argentinean Piaractus mesopotamicus, a fish species used for local consumption and export

The widespread distribution of contaminants of emerging concern (CECs) is a major concern due to their potential effects on human health and the environment. The insufficient sewage treatment plant infrastructures is a global problem most accentuated in less developed countries and results in the discharge of CECs to water bodies. Pacu (Piaractus mesopotamicus) is a ray-finned freshwater fish species native to the Paraná basin. It is also the most produced aquaculture fish species in Argentina since 2012. Though uninvestigated to date, the occurrence of CECs in pacu may be of high relevance due to production volumes and relevance to human exposure through fish consumption. In this study, we applied a high-resolution mass spectrometry screening method to qualitatively analyze over 100 CECs in pacu. Four extraction/cleanup methods were tested on pooled pacu fillet, including solid-phase extraction and QuEChERS. The method that produced the highest number of detections was selected for further analysis of pacu purchased in supermarkets and fish markets in Argentina between 2017 and 2020. Residues of pesticides, antibiotics, pharmaceuticals, personal care products, plasticizers, sweeteners, drug metabolites, stimulants, and illegal drugs were detected in the samples. A total of 38 CECs were detected, ranging between 24 and 35 CECs per individual sample. 100% of the samples had positive detections of caffeine, 1,7-dimethylxanthine, xanthine, benzoylecgonine, methylparaben, ethylparaben, bis(2-ethylhexyl) phthalate (DEHP), metolachlor, carbendazim, salicylic acid, 2,4-D, saccharin, cyclamate, and dodecanedioic acid. Mappings generated with correspondence analysis were used to explore similarities/dissimilarities among the detected compounds. To our knowledge this is the first report of saccharin, cyclamate, 2,4 - D, carbendazim, metolachlor, ethylparaben, propylparben, bisphenol A, DEHP, and benzotriazole in fish from Argentina, and the first report on the presence of lisinopril, metropolol acid and dodecanedioic acid in fish worldwide.

Pharmaceutical pollution of hospital effluents and municipal wastewaters of Eastern Canada

Quantification of drugs residues in wastewaters of different sources could help better understand contamination pathways, eventually leading to effluent regulation. However, limited data are available for hospital-derived wastewaters. Here, an analytical method based on automated on-line solid-phase extraction liquid chromatography tandem mass spectrometry (on-line SPE - UPLC-MS/MS) was developed for the quantification of multi-class pharmaceuticals in wastewaters. Filtrate phase and suspended solids (SPM) were both considered to evaluate the distribution of targeted analytes. Experimental design optimization involved testing different chromatographic columns, on-line SPE columns, and loading conditions for the filtrate phase, and different organic solvents and cleanup strategies for suspended solids. The selected methods were validated with suitable limits of detection, recovery, accuracy, and precision. A total of 30 hospital effluents and 6 wastewater treatment plants were sampled to evaluate concentrations in real field-collected samples. Certain pharmaceuticals were quantified at high levels such as caffeine at 670,000 ng/L in hospital wastewaters and hydroxyibuprofen at 49,000 ng/L in WWTP influents. SPM samples also had high contaminant concentrations such as ibuprofen at 31,000 ng/g in hospital effluents, fluoxetine at 529 ng/g in WWTP influents or clarithromycin at 295 ng/g in WWTP effluents. Distribution coefficients (K_d) and particle-associated fractions (Φ) indicate that pharmaceuticals tend to have better affinity to suspended solids in hospital wastewater than in municipal wastewaters. The results also bring arguments for at source treatment of these specific effluents before their introduction into urban wastewater systems.

Electrospun Polycrown Ether Composite Nanofibers as an Adsorbent for On-Line Solid Phase Extraction of Eight Bisphenols from Drinking Water Samples with Column-Switching Prior to High Performance Liquid Chromatography

Bisphenols (BPs) are a class of endocrine disruptors widely existing in the environment. They have a great impact on human health owing to their environmental endocrine disrupting effects, chronic toxicity, neurotoxicity, cytotoxicity and genetic toxicity. In this paper, an on-line packed fiber solid phase extraction (PFSPE) coupling with column-switching HPLC-FLD determination method was developed for the determination of eight BPs in drinking water. The poly (dibenzo-18-crown-6-ether)/polystyrene composite nanofibers (PDB18C6/PS) were prepared by electrospinning and used as an adsorbent for the on-line PFSPE column. The on-line PFSPE-HPLC equipment contained a dual ternary pump and a switching valve to enable enrichment, purification, and analysis directly in the system. The results showed that the proposed on-line PFSPE-HPLC-FLD method realized the simultaneous separation and detection of eight BPs: BPF, BPE, BPA, BPB, BPAF, BPAP, BPC and BPZ. The curves of the target analytes were prepared with good correlation coefficient values (r2 > 0.998) in the range of 50−1000 pg/mL. The limit of detection (S/N = 3) was 20 pg/mL, the limit of quantitation (S/N = 10) is 50 pg/mL. The recoveries of eight BPs were 94.8−127.3%, and the intra-day precisions (RSD) were less than 10%. The PFSPE column made of the PDB18C6/PS composite nanofibers has stable properties and can be reused at least 200 times. In the detection of drinking water samples, BPZ was detected in nearly 80% of drinking water samples, and BPA, BPAP, BPF and BPAF were also detected in some water samples. This high level of integration and automation was achieved in pretreatment of eight BPs from water samples. The proposed simple, rapid, and practical method has been successfully applied to the detection of eight BPs in drinking water, which can provide powerful technical support for drinking water quality and safety monitoring.

Emerging contaminants migration from pipes used in drinking water distribution systems: a review of the scientific literature

Migration of emerging contaminants (ECs) from pipes into water is a global concern due to potential human health effects. Nevertheless, a review of migration ECs from pipes into water distribution systems is presently lacking. This paper reviews, the reported occurrence migration of ECs from pipes into water distribution systems in the world. Furthermore, the results related to ECs migration from pipes into water distribution systems, their probable sources, and their hazards are discussed. The present manuscript considered the existing reports on migration of five main categories of ECs including microplastics (MPs), bisphenol A (BPA), phthalates, nonylphenol (NP), perfluoroalkyl, and polyfluoroalkyl substances (PFAS) from distribution network into tap water. A focus on tap water in published literature suggests that pipes type used had an important role on levels of ECs migration in water during transport and storage of water. For comparison, tap drinking water in contact with polymer pipes had the highest mean concentrations of reviewed contaminants. Polyvinyl chloride (PVC), polyamide (PA), polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET) were the most frequently detected types of microplastics (MPs) in tap water. Based on the risk assessment analysis of ECs, levels of perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluorohexane sulfonate (PFHxS), and perfluorooctane sulfonate (PFOS) were above 1, indicating a potential non-carcinogenic health risk to consumers. Finally, there are still scientific gaps on occurrence and migration of ECs from pipes used in distribution systems, and this needs more in-depth studies to evaluate their exposure hazards on human health.

Occurrence of legacy and replacement plasticizers, bisphenols, and flame retardants in potable water in Montreal and South Africa

The occurrence of thirty-nine contaminants including plasticizers, bisphenols, and flame retardants in potable water from Montreal and South Africa was analyzed to determine their presence and concentrations in different water sources. In Montreal, five bottled water (BW) brands and three drinking water treatment plants (DWTP) were included. In South Africa, water was sampled from one urban DWTP located in Pretoria, Gauteng, and one rural DWTP located in Vhembe, along with water from the same rural DWTP which had been stored in small and large plastic containers. A combination of legacy compounds, typically with proven toxic effects, and replacement compounds was investigated. Bisphenols, Dechlorane-602, Dechlorane-603, and s-dechlorane plus (s-DP) were not detected in any water samples, and a-dechlorane plus (a-DP) was only detected in one sample from Pretoria at a concentration of 1.09 ng/L. Lower brominated polybrominated diphenyl ethers (PBDE)s were detected more frequently than higher brominated PBDEs, always at low concentrations of <2 ng/L, and total PBDE levels were statistically higher in South Africa than in Montreal. Replacement flame retardants, organophosphate esters (OPEs), were detected at statistically higher concentrations in Montreal's BW (68.56 ng/L), drinking water (DW) (421.45 ng/L) and Vhembe (198.33 ng/L) than legacy PBDEs. Total OPE concentrations did not demonstrate any geographical trend; however, levels were statistically higher in Montreal's DW than Montreal's BW. Plasticizers were frequently detected in all samples, with legacy compounds DEHP, DBP, and replacement DINCH being detected in 100 % of samples with average concentrations ranging from 6.89 ng/L for DEHP in Pretoria to 175.04 ng/L for DINCH in Montreal's DW. Total plasticizer concentrations were higher in Montreal than in South Africa. The replacement plasticizers (DINCH, DINP, DIDA, and DEHA) were detected at similar frequencies and concentrations as legacy plasticizers (DEHP, DEP, DBP, MEHP). For the compounds reported in earlier studies, the concentrations detected in the present study were similar to other locations. These compounds are not currently regulated in drinking water but their frequent detection, especially OPEs and plasticizers, and the presence of replacement compounds at similar or higher levels than their legacy compounds demonstrate the importance of further investigating the prevalence and the ecological or human health effects of these compounds.

A sensitive, robust method for determining natural and synthetic hormones in surface and wastewaters by continuous solid-phase extraction-gas chromatography-mass spectrometry

Over recent decades, steroidal estrogens have become an emerging and very serious issue as they pose a serious threat to living organisms, soil, plants, and water resources in general. Estrogens have therefore been the subject of considerable scientific attention in order to develop new methodologies for its determination, being able of detecting them at very low concentrations. Those procedures minimize or eliminate the consumption of organic solvents and reagents that may be incompatible with the environment. In this respect, we developed a sensitive, selective method for the simultaneous determination of thirteen natural and synthetic hormones present at the nanogram-per-liter level in various types of water by using continuous solid-phase extraction in combination with gas chromatography and mass spectrometry (GC-MS). The target analytes were preferentially sorbed on an Oasis HLB sorbent column (80 mg) and eluted with acetone (600 µL) for derivatization with a mixture of 70 µL of N,O-bis(trimethylsilyl) trifluoroacetamide and trimethylchlorosilane and 35 µL of petroleum ether in a household microwave oven at 200 W for 4 min. Under optimum conditions, the ensuing method exhibited good linearity (r ≥ 0.998), good precision (RSD ≤ 7%), high recoveries (92-103%), and low detection limits (0.01-0.3 ng L-1). The method outperforms existing alternatives in robustness, sensitivity, throughput, flexibility-it allows both estrogens, progestogens, and androgens to be determined simultaneously-and compliance with the principles of Green Chemistry. It was successfully used to analyze various types of water samples (mineral, tap, well, pond, swimming pool, river, and waste) that were found to contain four estrogens (estrone, 17β-estradiol, 17α-ethinylestradiol, and hexestrol), two progestogens (testosterone, dihydrotestosterone), and one progestogen (progesterone) at concentrations ranging from 3.0 to 110 ng L-1.

Synthetic Progestins in Waste and Surface Waters: Concentrations, Impacts and Ecological Risk

Synthetic progestins (PGs) are a large family of hormones used in continuously growing amounts in human and animal contraception and medicinal therapies. Because wastewater treatment plants (WWTPs) are unable to eradicate PGs after excretion, they are discharged into aquatic systems, where they can also be regenerated from conjugated PG metabolites. This review summarises the concentrations of 12 PGs in waters from 2015 to 2021. The selected PGs were considered of particular interest due to their wide use, activity, and hormonal derivation (from testosterone, progesterone, and spirolactone). We concluded that PGs had been analysed in WWTPs influents and effluents and, to a lesser extent, in other matrices, including surface waters, where their concentrations range from ng/L to a few µg/L. Because of their high affinity for cell hormone receptors, PGs are endocrine disruptor compounds that may alter the reproductive fitness and development of biota. This review focused on their biological effects in fish, which are the most used aquatic model organisms to qualify the impacts of PGs, highlighting the risks that environmental concentrations pose to their health, fecundity, and fertility. It is concluded that PGs research should be expanded because of the still limited data on their environmental concentrations and effects.

Pharmaceuticals, hormones, plasticizers, and pesticides in drinking water

Humans are exposed to endocrine disrupting compounds (EDCs) in tap water via drinking water. Currently, most of the analytical methods used to assess a long list of EDCs in drinking water have been made available only for a single group of EDCs and their metabolites, in contrast with other environmental matrices (e.g., surface water, sediments, and biota) for which more robust methods have been developed that allow detection of multiple groups. This study reveals an analytical method of one-step solid phase extraction, incorporated together with liquid chromatography-tandem mass spectrometry for the quantification of multiclass EDCs (i.e., pharmaceuticals, hormones, plasticizers, and pesticides) in drinking water. Fifteen multiclass EDCs significantly varied in amount between field samples (p < 0.05), with a maximum concentration of 17.63 ng/L observed. Daily exposure via drinking water is unlikely to pose a health risk (risk quotient < 1). This method serves as an analytical protocol for tracing multiclass EDC contamination in tap water as part of a multibarrier approach to ensure safe drinking water for good health and well-being. It represents a simpler one-step alternative tool for drinking water analysis, thereby avoiding the time-consuming and expensive multi-extraction steps that are generally needed for analyzing multiclass EDCs.

Biological effect and chemical monitoring of Watch List substances in European surface waters: Steroidal estrogens and diclofenac - Effect-based methods for monitoring frameworks

Three steroidal estrogens, 17α-ethinylestradiol (EE2), 17β-estradiol (E2), estrone (E1), and the non-steroidal anti-inflammatory drug (NSAID), diclofenac have been included in the first Watch List of the Water Framework Directive (WFD, EU Directive 2000/60/EC, EU Implementing Decision 2015/495). This triggered the need for more EU-wide surface water monitoring data on these micropollutants, before they can be considered for inclusion in the list of priority substances regularly monitored in aquatic ecosystems. The revision of the priority substance list of the WFD offers the opportunity to incorporate more holistic bioanalytical approaches, such as effect-based monitoring, alongside single substance chemical monitoring. Effect-based methods (EBMs) are able to measure total biological activities (e.g., estrogenic activity or cyxlooxygenase [COX]-inhibition) of specific group of substances (such as estrogens and NSAIDs) in the aquatic environment at low concentrations (pg/L). This makes them potential tools for a cost-effective and ecotoxicologically comprehensive water quality assessment. In parallel, the use of such methods could build a bridge from chemical status assessments towards ecological status assessments by adressing mixture effects for relevant modes of action. Our study aimed to assess the suitability of implementing EBMs in the WFD, by conducting a large-scale sampling and analysis campaign of more than 70 surface waters across Europe. This resulted in the generation of high-quality chemical and effect-based monitoring data for the selected Watch List substances. Overall, water samples contained low estrogenicity (0.01-1.3 ng E2-Equivalent/L) and a range of COX-inhibition activity similar to previously reported levels (12-1600 ng Diclofenac-Equivalent/L). Comparison between effect-based and conventional analytical chemical methods showed that the chemical analytical approach for steroidal estrogens resulted in more (76%) non-quantifiable data, i.e., concentrations were below detection limits, compared to the EBMs (28%). These results demonstrate the excellent and sensitive screening capability of EBMs.

Enzymatic probe sonication for quick extraction of total bisphenols from animal-derived foods: Applicability to occurrence and exposure assessment

A high demand exists in bisphenols (BPs) screening studies for quick, reliable and straightforward analytical methods that generate data faster and simultaneously. Herein, we describe a combination of enzymatic probe sonication (EPS) and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) for quick extraction and simultaneous quantification of eight important BPs in animal-derived foods. Results obtained demonstrated that the ultrasonic probe power could not only enhance the enzymatic hydrolysis efficiency, but also accelerate the liquid-liquid extraction procedure. Under optimized EPS parameters, one sample could be exhaustively extracted within 120 s, as compared with 12 h needed for the conventional enzymatic extraction which is more suitable for high-throughput analysis. The method was successfully applied to analyze residual BPs in animal-derived foods collected from Beijing, China. Widespread occurrence of BPA, BPS, BPF, BPAF, BPP, and BPB were found, with detection frequencies of 65.2%, 42.4%, 33.7%, 29.4%, 28.3%, and 27.2%, respectively. The highest total concentration levels of BPs (sum of the eight BPs analyzed, ΣBPs) were found in chicken liver (mean 12.2 μg/kg), followed by swine liver (6.37 μg/kg), bovine muscle (3.24 μg/kg), egg (2.03 μg/kg), sheep muscle (2.03 μg/kg), chicken muscle (1.45 μg/kg), swine muscle (1.42 μg/kg), and milk (1.17 μg/kg). The estimated daily intake (EDI) of BPs, based on the mean and 95th percentile concentrations and daily food consumptions, was estimated to be 5.687 ng/kg bw/d and 22.71 ng/kg bw/d, respectively. The human health risk assessment in this work suggests that currently BPs do not pose significant risks to the consumers because the hazard index (HI) was <1.

Degradation synergism between sonolysis and photocatalysis for organic pollutants with different hydrophobicity: A perspective of mechanism and application for high mineralization efficiency

Despite extensive studies, the fundamental understanding of synergistic mechanisms between sonolysis and photocatalysis for the abatement of persistent organic pollutants (POPs) remains uncertain. As different phases formed under ultrasound irradiation, hydrophilic POPs, sulfamethoxazole (SMX, K_ow: 0.89), predominantly resides in bulk liquid and is ineffectively degraded by sonolysis (k_US = 3.33 × 10^-3 min^-1) since <10% of hydroxyl radicals (·OH) formed at the gas-liquid interface of cavitation is diffused into the bulk, whereas the other fraction rapidly recombines into hydrogen peroxide (H₂O₂). This study provides a proof-of-concept for the mechanism by presenting various analytical results, endorsing the synergistic role of photoexcited electrons in splitting sonolysis-induced H₂O₂ into ·OH, particularly in the bulk phase. In a sonophotocatalytic system, the hydrophobic POPs such as bisphenol A (BPA) and atrazine (ATZ) were mainly degraded in gas-liquid interface indicated by the low synergistic values correlation compared to SMX [i.e., SMX has a higher synergistic factor, f_syn (3.26) than BPA (1.30) and ATZ (1.35)]. Also, f_syn was found linearly correlated with the contribution factor of photocatalysis to split H₂O₂. Three times of consecutive kinetics using an effluent of municipal (MP) wastewater spiked by POPs presented >98% POPs and >96% total organic carbon (TOC) removal.

Development and implementation of an analytical procedure for the quantification of natural and synthetic steroid hormones in whole surface waters

Natural and synthetic steroid hormones are chronically released into aquatic spheres. Whereas knowledge on their combined mode of action and the cocktail effect are needed, only few multi-class methods address the challenge of their trace quantification in surface waters. The current study describes a sensitive multi-residue analytical strategy aiming to quantify 23 steroid hormones belonging to androgens, estrogens, glucocorticoids and progestogens in whole surface waters. The procedure relies on a two-step solid-phase extraction followed by an ultra-performance liquid chromatography separation coupled to tandem mass spectrometry detection (UPLC-MS/MS). Isotope dilution was implemented when possible in order to ensure the reliability of the measurement. The procedure was optimized toward the reliable quantification of the 23 target compounds at the predicted no-effect concentrations when existing or below the ng L^-1 level. Satisfactory absolute global recoveries ≥ 77% were obtained for almost all compounds (21 out of 23) in intermediate precision conditions. Measurement errors were comprised between -27% and +17% for the great majority of compounds (21 out of 23) with standard deviations < 20% in intermediate precision conditions. Despite signal suppression was observed in water samples, satisfactory limits of quantification were achieved, ranging from 0.035 ng L^-1 for 17alpha-ethinylestradiol to 1 ng L^-1 for 6beta-hydroxycortisol and 6beta-hydroxydexamethasone. Abiotic stability was demonstrated for the great majority of target compounds (22 out of 23) in reference water samples stored at 4 ± 3 °C during 48 h, driving our sampling strategy. To demonstrate its fitness for purpose, the procedure was implemented in a preliminary monitoring survey of Belgian surface waters. As a result, 6 out of 23 target compounds were detected or quantified, showing a contamination by some estrogens and glucocorticoids at levels ranging from 0.1 to 0.9 ng L^-1.

Potential risk of BPA and phthalates in commercial water bottles: a minireview

The global water bottling market grows annually. Today, to ensure consumer safety, it is important to verify the possible migration of compounds from bottles into the water contained in them. Potential health risks due to the prevalence of bisphenol A (BPA) and phthalates (PAEs) exposure through water bottle consumption have become an important issue. BPA, benzyl butyl phthalate (BBP), di-n-butyl phthalate (DBP) and di (2-ethylhexyl) phthalate (DEHP) can cause adverse effects on human health. Papers of literature published in English, with BPA, BBP, DBP and DEHP detections during 2017, by 2019 by liquid chromatography and gas chromatography analysis methods were searched. The highest concentrations of BPA, BBP, DBP and DEHP in all the bottled waters studied were found to be 5.7, 12.11, 82.8 and 64.0 μg/L, respectively. DBP was the most compound detected and the main contributor by bottled water consumption with 23.7% of the Tolerable Daily Intake (TDI). Based on the risk assessment, BPA, BBP, DBP and DEHP in commercial water bottles do not pose a serious concern for humans. The average estrogen equivalent level revealed that BPA, BBP, DBP and DEHP in bottled waters may induce adverse estrogenic effects on human health.

Occurrence of contaminants of emerging concern in surface waters from Paraopeba River Basin in Brazil: seasonal changes and risk assessment

This study describes the application of gas chromatography coupled to mass spectrometry (GC-MS) to evaluate the occurrence of 12 CECs-contaminants of emerging concern (bisphenol A, diclofenac, 17β-estradiol, estriol, estrone, 17α-ethinylestradiol, gemfibrozil, ibuprofen, naproxen, 4-nonylphenol, 4-octylphenol, and acetaminophen) in surface waters from Paraopeba River Basin, Minas Gerais State, Brazil. The analytical procedure was validated and applied to 60 surface water samples collected across four sampling campaigns along the upper and middle watershed. Methods for CECs determination involved sample filtration, and solid-phase extraction (SPE) with subsequent derivatization of the target compounds prior to their analysis by GC-MS. The LOQ varied from 3.6 to 14.4 ng/L and extraction recoveries ranged from 46.1 to 107.1% for the lowest spiked concentration level (10 ng/L). The results showed a profile of spatial distribution of compounds, as well as the influence of rainfall. Ibuprofen (1683.9 ng/L), bisphenol (1587.7 ng/L), and naproxen (938.4 ng/L) occurred in higher concentrations during the rainy season, whereas during the dry season, the concentrations of bisphenol (1057.7 ng/L), estriol (991.0 ng/L), and estrone (978.4 ng/L) were highlighted. The risk assessment of human exposure shows that for most contaminants, the concentration is well below the estimated thresholds for chronic toxicity from water intake. However, estradiol and 17α-ethinylestradiol showed concentrations in the same order of magnitude as the guide values estimated for babies.

Determination of estrogens and estrogen mimics by solid-phase extraction with liquid chromatography-tandem mass spectrometry

An analytical method has been developed and validated for the determination of six estrogens and estrogen mimics, namely estriol (E3), bisphenol A (BPA), 17β-estradiol (E2), estrone (E1), ethynyl estradiol (EE2) and dienestrol (DIE), with frequent occurrence in the natural environment. Solid phase extraction coupled with liquid chromatography tandem mass spectrometry (SPE-LC-MS/MS) using electrospray ionization (ESI) in a negative mode was applied to concentration, identification, and quantification of estrogens and estrogen mimics. The SPE conditions were optimized as the selection of C18 as cartridges and MeOH as an eluent, and the control of solution pH at 9.0. The method was validated by satisfactory recoveries (80-130%) and intra-day and inter-day precision (<18.4%, as relative standard deviation), and excellent linearity for calibration curves (R² > 0.996). The limits of detection (LODs) for six target estrogenic compounds ranged between 2.5 and 19.2 ng/L. The effects of matrix background on the determination were evaluated in terms of LODs, LOQs, analyte recovery, and slopes of calibration curves in five different water matrices. Matrix effects by tap water were negligible. However, both matrix suppression and enhancement (i.e., E3, E1, DIE) were observed in surface water and wastewater. The positive correlation between LODs and TOC in various water matrices indicated the negative effect of organic pollutants on the method sensitivity. The sum of target estrogenic compounds in environmental samples were within 17-9462 ng/L.

A targeted review on fate, occurrence, risk and health implications of bisphenol analogues

Due to its widespread applications and its ubiquitous occurrence in the environment, bisphenol A (BPA) and its alternatives have gained increasing attention, especially in terms of human safety. Like BPA, alternatives such as bisphenol S (BPS), bisphenol F (BPF), and bisphenol AF (BPAF) have also been identified to be endocrine-disrupting chemicals (EDCs). Hence, in this study, we reviewed the literature of BPA and its alternatives mainly published between the period 2018-2020, including their occurrences in the environment, human exposure, and adverse health effects. The review shows that bisphenols are prevalent in the environment with BPA, BPS, and BPF being the most ubiquitous in the environment worldwide, though BPA remains the most abundant bisphenol. However, the levels of BPS and BPF in different environmental media have been constantly increasing and their fates and health risks are being evaluated. The studies show that humans and animals are exposed to bisphenols in many different ways through inhalation and ingestion and the exposure can have serious health effects. Urinary bisphenols (BPs) levels were frequently reported to be positively associated with different health problems such as cancer, infertility, cardiovascular diseases, diabetes and neurodegenerative diseases. Our literature study also shows that BPs generate reactive oxygen species and disrupt various signalling pathways, which could lead to the development of chronic diseases. Activated carbon-based and chitosan-based sorbents have been widely utilized in the removal of BPA in aqueous solutions. In addition, enzymes and microorganisms have also been getting much attention due to their high removal efficiencies.

Understanding the occurrence and distribution of emerging pollutants and endocrine disruptors in sensitive coastal South Florida Ecosystems

Environmental exposure risk to different xenobiotics, which can potentially alter the function of the endocrine system, remains a great health and safety concern for aquatic species and humans. Steroid hormones, pharmaceuticals and personal care products (PPCPs) have been identified as important aquatic contaminants due to their widespread occurrence in surface waters and their endocrine disrupting properties. Heavily populated areas in South Florida not served by municipal wastewater collection present an unexpected high risk of anthropogenic contaminants to nearby coastal systems through surface runoff and groundwater flow. Previous studies in South Florida have been largely concentrated on assessing the relevance of the fate and transport of inorganic nutrients, heavy metals and pesticides with regulatory criteria. Therefore, a significant gap exists in assessing occurrence, distribution and biological significance of the presence of human related organic contaminants in natural surface waters. In this study, we have developed a fast and sensitive online solid-phase extraction followed by liquid chromatography-high resolution mass spectrometry (SPE-LC-HRMS) method using a Q-Exactive system for the determination of the occurrence and distribution of selected wastewater tracers/indicators, recalcitrant PPCPs and steroid hormones in South Florida surface waters. Seasonal and spatial variations of these contaminants were monitored from 2017 to 2019. The presence of total coliforms and E. coli were also evaluated in order to further assess water quality. Correlations between hormones and anthropogenic tracers were explored to better elucidate the sources, pathways and exposure risks to these contaminants. Caffeine, sucralose, Diethyl-m-toluamide (DEET) and carbamazepine were frequently detected in the water samples, which is indicative of extensive wastewater intrusion impacting the surface water. Estrone (E1), 17-β-estradiol (E2), and 17-α-ethynylestradiol (EE2) levels found in surface water raises concern of potential endocrine disruption effects in the aquatic ecosystem. Hazard quotient has been calculated to identify areas with high ecological risks to aquatic organisms.

Surveillance of plasticizers, bisphenol A, steroids and caffeine in surface water of River Ganga and Sundarban wetland along the Bay of Bengal: occurrence, sources, estrogenicity screening and ecotoxicological risk assessment

The transboundary River Ganga serves as a conduit for meltwater from the Himalayas and is a major freshwater source for two thirds of Indian population before emptying into the Sundarban Delta, the largest estuary in the Bay of Bengal. Endocrine disrupting compounds (EDCs) such as phthalic acid esters (PAEs) and bisphenol A (BPA) used as organic plastic additives can pollute the aquatic environment receiving plastic litter. Hence, we have investigated these EDCs in water samples from Ganga and Sundarban wetland of India. Since these compounds exhibit estrogenic potential, we have further measured steroids and evaluated the estrogenic activity (estradiol equivalents, BioE2Eqs) using an in-vitro bioassay (E-Screen). Further BioE2Eqs were compared with the sum of predicted estradiol equivalents based on the chemical concentrations of PAEs and BPA by E-Screen (ChemE2Eq) and YES factors (ChemYES). Caffeine was measured as a marker for anthropogenic wastewater discharge. Results showed that the highest BioE2Eq (below the lowest observable effect of E2 on fish) was associated with sites having sewer outfalls in the middle stretch of the river, and concomitantly coinciding with the elevated concentrations of caffeine. Neither ChemE2Eq nor ChemYES correlated with measured BioE2Eqs. River concentrations of BPA (0.04-4.46 µg/L) and ∑₇plasticizers (0.43-7.63 µg/L) were higher than BPA (0.21-2.82 µg/L) and ∑₇plasticizers (0.85-2 µg/L) in the Sundarban wetland. The only steroids detected were androgens, found at four sites in Ganga (0.007 µg/L± 0.003, mean ± S.D.). The highest estimated ecotoxicological risk to aquatic insect and fish stemmed from BPA. A secondary effect, and a potential impact on human health could be reflected via fish consumption from the productive fisheries region along the lower stretch of River Ganga. Identification of areas of elevated estrogenicity, plasticizer and steroid concentrations in River Ganga can be used to design and implement interventions for the remediation of such emerging contaminants.

Stability issues of microcystins, anabaenopeptins, anatoxins, and cylindrospermopsin during short-term and long-term storage of surface water and drinking water samples

Reproducible analytical procedures and rigorous quality control are imperative for an accurate monitoring of cyanobacterial toxins in environmental water samples. In this study, the short-term and long-term storage stability of diverse cyanotoxins (anatoxins, cylindrospermopsin, anabaenopeptins, and 12 microcystins) was evaluated in water samples, under different scenarios. Transport controls were performed at three monitoring sites in spiked ultrapure water and lake water to investigate short-term stability issues. Medium-term storage stability was evaluated for up to 14-28 days in ultrapure water, chlorine-treated drinking water (amended with reductant), and surface water (filtered and unfiltered) stored at different temperatures (20 °C, 4 °C, and -20 °C). Substantial decreases of cylindrospermopsin and anabaenopeptins were observed in tap water (20 °C) and unfiltered surface water (20 °C or 4 °C). Regardless of matrix type, cyanotoxin recoveries generally remained within an 80-120% range when the water samples were kept frozen. After a prolonged storage duration of 365 days at -20 °C, most cyanotoxins experienced decreases in the range of 10-20%. The notable exception was for the tryptophan-containing MC-LW and MC-WR, with more substantial variations (30% to 50% decrease) and conversion to N-formylkynurenine analogs. Reanalysis of field-collected surface waters after long-term storage at -20 °C also indicated significantly decreasing trends of cyanotoxins (between 6% and 23% decrease). In view of the above, short sample hold times should be favored as recommended in EPA methods.

Highly sensitive electrochemical BPA sensor based on titanium nitride-reduced graphene oxide composite and core-shell molecular imprinting particles

A sensitive electrochemical sensor was proposed via combining molecular imprinting technique with the graphene material-doped titanium nitride. The novel graphene with 3-dimensional structure displayed more binding sites and better electrochemical properties. Moreover, this study focused on coating pyrrole with electrical conductivity on the surface of silica as a monomer, and BPA as the template. The interaction made specific detection possible, between monomer and template. With a series of characterizations and electrochemical measurements, CPE (carbon paste electrode)-contained TiN-rGO composite was proved to have conductivity improved. Also, the modified polymer performed well selectivity which reflected in that it was almost impervious to distractions. Under optimized conditions, a linear dependence was observed from 0.5 to 100 nmol L^-1 with a detection limit of 0.19 nmol L^-1. The sensor explicated outstanding repeatability via repetitive experiment with the RSD of 0.02%, while the results of stability experiment reached the RSD of 1.90%. Eventually, it was used to analyze BPA residues in 3 kinds of daily supplies. The results indicated the potential of the sensor in environmental detection prospectively.

A New Strategy for the Analysis of Steroid Hormones in Industrial Wastewaters by Paper Spray Ionization Mass Spectrometry

A new approach using paper spray ionization mass spectrometry (PSI-MS) for the analysis of steroid hormones in wastewater samples has been demonstrated. Triangular papers containing paraffin barriers as microfluidic channels were used to direct the sample solution to the paper tip, preventing the sample from spreading over the corners of the paper. The method was used to analyze the hormones levonorgestrel and algestone acetophenide in industrial wastewaters. Analytical curves presented a correlation coefficient (R²) above 0.99. Limits of quantification were below 2.3 ppm and limits of detection below 0.7 ppm. Values of precision (coefficient of variation) and accuracy (relative error) were less than 15% for all analyses. Recovery results ranged from 82% to 102%. Levonorgestrel was also analyzed by high-performance liquid chromatography coupled to mass spectrometry in order to compare the analytical performance with PSI-MS. No statistically significant differences were found between both methods. This study demonstrates the usefulness of PSI-MS for rapid analysis of hormones in industrial wastewater samples and also indicates its potential to be employed as a simple and reliable analytical method in environmental sciences.

Occurrence and distribution of hormones and bisphenol A in Laguna Lake, Philippines

The occurrence of hormones and hormone-like compounds in water has been regarded as an emerging environmental concern. These water contaminants are known to cause endocrine disruption that may affect aquatic organisms. In this study, hormones and phenolic xenoestrogens were investigated and measured in the surface waters of Laguna Lake, Philippines. Laguna Lake is the largest lake in the country that has many uses including fish cultivation and source for potable water production. The hormones estrone, 17-beta-estradiol, 17-alpha-ethynylestradiol, progesterone and testosterone as well as the plasticizer bisphenol A in the lake water were determined by solid phase extraction and LC-MS/MS. The extraction method exhibited good recoveries (75-90% in spiked lake water) while the instrumental method of analysis has low detection limits (0.01-0.24 μg/L) and good linear response (>99% in the 0-50 μg/L concentration range). In the nine sampling sites across the lake, estrone was found in concentrations between 0.03 and 0.30 ng/L. 17-Beta-estradiol, testosterone and progesterone were detected in some of the sites in concentrations up to 0.36, 0.22, and 2.05 ng/L, respectively. Bisphenol A was detected in all sites in higher concentrations of 0.71-47.40 ng/L. Although there are no local guidelines yet, the determination and monitoring of these emerging water contaminants are important because of their potential environmental impacts. Further to this initial study, investigations on point sources spanning the tributary rivers, long-term determination of locational and temporal variations, and assessment of ecotoxicological risks are needed. These are crucial in the regulation and mitigation of discharges into the lake.

Investigation of the effects of bisphenol-A exposure on lymphoid system in prenatal stage

Bisphenol-A (BPA) used in the production of plastic materials is a temperature-soluble agent. It also has a steroid hormone-like activity; therefore, it poses a danger to human health. In our study, we aimed to investigate the effects of BPA on lymph node and spleen in male rats exposed to this agent during prenatal stage. The pregnant female rats were divided into four groups: control, sham, low dose (300 µg/kg BPA), and high dose (900 µg/kg BPA). BPA was dissolved in 1 mL of corn oil and administered to the pregnant rats every day during pregnancy. On the 21st and 45th day after the birth, male rats' lymph node and spleen samples were taken and histopathological examination was performed. Samples were stained with hematoxylin and eosin to determine the general histological appearance, and with CD3 and CD20 immunohistochemically. The results of staining were evaluated by H-score, and statistical analysis was performed. In the samples, BPA applications were not found to cause significant tissue damage. But there was a significant decrease in the immunoreactivities of CD3 and CD20 after BPA applications in both 21st and 45th day samples. After high dose BPA administration, decreased CD3 immunoreactivity was statistically significant. It is thought that BPA does not cause histologically significant tissue damage, but it may impair organ function at cellular level. The investigation of molecules involved in organ function will be useful in revealing the mechanisms that will cause dysfunction.

Occurrence and assessment of environmental risks of endocrine disrupting compounds in drinking, surface and wastewaters in Serbia

The present study is the first comprehensive monitoring of 13 selected endocrine disrupting compounds (EDCs) in untreated urban and industrial wastewater in Serbia to assess their impact on the Danube River basin and associated freshwaters used as sources for drinking water production in the area. Results showed that natural and synthetic estrogens were present in surface and wastewater at concentrations ranging from 0.1 to 64.8 ng L^-1. Nevertheless, they were not detected in drinking water. For alkylphenols concentrations ranged from 1.1 to 78.3 ng L^-1 in wastewater and from 0.1 to 37.2 ng L^-1 in surface water, while in drinking water concentrations varied from 0.4 to 7.9 ng L^-1. Bisphenol A (BPA) was the most abundant compound in all water types, with frequencies of detection ranging from 57% in drinking water, to 70% in surface and 84% in wastewater. Potential environmental risks were characterized by calculating the risk quotients (RQs) and the estrogenic activity of EDCs in waste, surface and drinking water samples, as an indicator of their potential detrimental effects. RQ values of estrone (E1) and estradiol (E2) were the highest, exceeding the threshold value of 1 in 60% of wastewater samples, while in surface water E1 displayed potential risks in only two samples. Total estrogenic activity (EEQ_t) surpassed the threshold of 1 ng E2 L^-1 in about 67% of wastewater samples, and in 3 surface water samples. In drinking water, EEQ_t was below 1 ng L^-1 in all samples.

Interpol review of controlled substances 2016-2019

This review paper covers the forensic-relevant literature in controlled substances from 2016 to 2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/content/download/14458/file/Interpol%20Review%20Papers%202019.pdf.

Overview of the analysis, occurrence and ecological effects of hormones in lake waters in Asia

Hormones are natural and synthetic compounds that are now being detected in the aquatic environment. Many lakes in Asia are important water sources that may be affected by these emerging contaminants. Lakes are drains and reservoirs of watersheds that are altered by changing land use and environmental conditions. While there are several studies on the detection of hormones in lakes, these studies were mostly done in China. Limited information is available on the presence of these contaminants in the lakes in other Asian countries. Hormones in the lake water come from discharge waters in urban areas, farm runoffs, and effluents of wastewater and sewage treatment plants. Hormones contamination in water has been shown to affect the reproduction and growth of certain aquatic organisms. In this review, a background on the chemical nature and physiological functions of hormones is provided and the existing knowledge on the occurrence and ecological impacts of hormones in lakes is described. The available analytical methods for sampling, analyte extraction and instrumental analysis are outlined. This overview provides insights on the current conditions of lakes that may be impacted by hormones contamination. Understanding the levels and possible ecological consequences will address the issues on these emerging contaminants especially in the Asian environment. This will elicit discussions on improving guidelines on wastewater discharges and will drive future research directions.

Occurrence and fate of androgens in municipal wastewater treatment plants in China

Public concerns about potential ecological risks of androgens discharged to the environment through wastewater treatment plants (WWTPs) has resulted in an increased interest regarding the occurrence and fate of androgens in WWTPs. In this study, the occurrence and removal of eight androgens from 12 municipal WWTPs distributed in eleven cities in China were investigated. The composition profiles of eight androgens in influent, effluent, and excess sludge were studied. Multiple factor analyses were performed to reveal the factors affecting the distribution of androgens in WWTP influent. Results showed similar composition profiles of androgens in the studied WWTPs, with androsterone and dehydroepiandrosterone confirmed as the dominant androgens. The distributions of androgens in WWTP influent were related to the chemical oxygen demand in influent and the gross domestic product (GDP) of WWTP-associated cities. The target androgens have high aqueous removal rates, with a mean removal rate of >90%. Additionally, the behaviors of androgens were evaluated by mass balance along anaerobic-anoxic-oxic (AAO) processes in a WWTP, in which many of the androgens were eliminated mainly in the anaerobic tank. Further, 15 biotransformation products of testosterone were identified under anaerobic, anoxic, and aerobic sludge, respectively. Based on these metabolites, a general biotransformation pathway of testosterone under anaerobic, anoxic, and aerobic sludge is presented.

An ultrasensitive fluorescent aptasensor based on truncated aptamer and AGET ATRP for the detection of bisphenol A

Given the gigantic harmfulness of bisphenol A (BPA), a novel and ultrasensitive aptasensor, which employs the truncated BPA aptamer, click chemistry, and activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP), was developed herein for the quantitative determination of BPA. Firstly, hairpin DNAs (hairpins) with a thiol at the 5' end and an azide group at the 3' end were conjugated with aminated magnetic beads (MBs) through heterobifunctional cross-linkers. BPA truncated aptamer (ssDNA-A) hybridizes with its complementary single-stranded DNA (ssDNA-B) to form double-stranded DNA. In the presence of BPA, ssDNA-A specifically captures BPA, and then ssDNA-B is released. Subsequently, the ssDNA-B hybridizes with hairpins to expose the azide group near the surface of the MBs. Then, propargyl-2-bromoisobutyrate (PBIB), the initiator of AGET ATRP containing alkynyl group, was conjugated with azide group of hairpins via the Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC). Consequently, a large number of fluorescein-o-acrylate (FA) were introduced to the MBs through AGET ATRP, resulting in that the fluorescence intensity was increased dramatically. Obviously, the fluorescence intensity was especially sensitive to the change of BPA concentration, and this method can be used in quantitative determination of BPA. Under optimal conditions, a broad liner range from 100 fM to 100 nM and a low limit of detection (LOD) of 6.6 fM were obtained. Moreover, the method exhibits not only excellent specificity for BPA detection over BPA analogues but high anti-interference ability in real water sample detection, indicating that it has huge application prospect in food safety and environment monitoring.

Occurrence, fate and risk assessment of BPA and its substituents in wastewater treatment plant: A review

Several bisphenol analogues (BPs) are gradually replacing bisphenol A (BPA) in many fields, following strict restrictions on the production and use of BPA. The presence of micropollutants in wastewater treatment plants (WWTPs) may pose risks to the aquatic ecosystem and human health. In this review, we outlined the occurrence and fate of BPs in WWTPs, and estimated their potential risks to the aquatic ecosystem. BPA is still the most predominant bisphenol analogue in WWTPs with high detection rate and concentration, followed by bisphenol S (BPS) and F (BPF). Biodegradation and adsorption are the main removal pathways for removal of BPs in WWTPs. The secondary (activated sludge process, biological aerated filter, and membrane bioreactor) and advanced (membrane technique, ultraviolet disinfection, adsorption process, and ozonation) treatment processes show high removal efficiency for BPs, which are influenced by many factors such as sludge retention time and redox conditions. BPs other than BPA (assessed in this review) in effluent of WWTPs have low risks to Daphnia magna and early life stages on medaka, while BPA shows a medium or high risk under certain conditions. Knowledge gaps have been identified and future line of research on this class of chemicals in WWTPs is recommended. More data are needed to illustrate the occurrence and fate of BPs in WWTPs. Environmental risks of BPs other than BPA initiating from wastewater discharge to aquatic organisms remain largely unknown.

Analysis of the neurotoxin β-N-methylamino-L-alanine (BMAA) and isomers in surface water by FMOC derivatization liquid chromatography high resolution mass spectrometry

The neurotoxin β-N-methylamino-L-alanine (BMAA), suspected to trigger neurodegenerative diseases, can be produced during cyanobacterial bloom events and subsequently affect ecosystems and water sources. Some of its isomers including β-amino-N-methylalanine (BAMA), N-(2-aminoethyl) glycine (AEG), and 2,4-diaminobutyric acid (DAB) may show different toxicities than BMAA. Here, we set out to provide a fast and sensitive method for the monitoring of AEG, BAMA, DAB and BMAA in surface waters. A procedure based on aqueous derivatization with 9-fluorenylmethyl chloroformate (FMOC-Cl) was investigated for this purpose. Under optimized conditions, a small aqueous sample aliquot (5 mL) was spiked with BMAA-d3 internal standard, subjected to FMOC-Cl derivatization, centrifuged, and analyzed. The high-throughput instrumental method (10 min per sample) involved on-line pre-concentration and desalting coupled to ultra-high-performance liquid chromatography high-resolution mass spectrometry (UHPLC-HRMS). Chromatographic gradient and mobile phases were adjusted to obtain suitable separation of the 4 isomers. The method limits of detection were in the range of 2-5 ng L-1. In-matrix validation parameters including linearity range, accuracy, precision, and matrix effects were assessed. The method was applied to surface water samples (n = 82) collected at a large spatial scale in lakes and rivers in Canada. DAB was found in >70% of samples at variable concentrations (<3-1,900 ng L-1), the highest concentrations corresponding to lake samples in cyanobacterial bloom periods. BMAA was only reported (110 ng L-1) at one HAB-impacted location. This is one of the first studies to report on the profiles of AEG, BAMA, DAB, and BMAA in background and impacted surface waters.

Combination of yeast-based in vitro screens with high-performance thin-layer chromatography as a novel tool for the detection of hormonal and dioxin-like compounds

The combination of classic in vitro bioassays with high-performance thin-layer chromatography (HPTLC) is a promising technique to directly link chemical analysis of contaminants to their potential adverse biological effects. With respect to endocrine disruption, much work is focused on estrogenicity. While a direct combination of HPTLC and the yeast estrogen screen is already developed, it is well accepted that further endocrine effects are relevant for monitoring environmental wellbeing. Here we show that non-estrogenic specific biological endpoints, (partly) related to the endocrine system, can also be addressed by combining respective yeast reporter gene assays with HPTLC to support effect-directed analysis (EDA). These are: androgenicity (YAS), thyroidogenicity (YTS), dioxin-like effects (YDS), effects on the vitamin D (YVS) and the retinoic acid receptor (YRaS). A proof of principle is demonstrated within this study by the characterization of dose-dependent responses to different model compounds for the respective receptors with and without chromatographic development of the HPTLC-plate. Limits of quantification (LOQ) for several model compounds were determined, e.g. 37 pg for testosterone (p-YAS), 0.476 ng for β-naphthoflavone (p-YDS) and 1.02 ng for calcipotriol hydrate (p-YVS) with chromatographic development. The LOQ for p-YTS and p-YRaS were 10.16 pg for 3,3',5-triiodothyroacetic acid (p-YTS) and 0.41 pg for tamibarotene (p-YRaS), without chromatographic separation. Furthermore, we challenged the developed methodology using environmental samples, demonstrating an elimination efficiency of androgenic activity from municipal wastewater by a wastewater treatment plant between 99.4 and 100%. We anticipate our methodology to substantially broaden the spectrum of specific endpoints combined with HPTLC for an efficient and robust screening of environmental samples to guide a subsequent in-depth EDA.

Data supporting the optimization of liquid chromatography tandem mass spectrometry conditions to analyze EPA-priority hormones and bisphenol A in water samples

This database presents the optimization of ultra-high-performance liquid chromatography electrospray ionization tandem mass spectrometry (UHPLC-MS/MS) for the analysis of EPA-priority endocrine disruptor compounds (13 hormones and bisphenol A). Various method parameters were tested and compared for improved sensitivity. Data related to the selection of the ionization source (heated-ESI vs. APCI) are presented, including optimization results of source parameters. Compound-dependent responses when varying the UHPLC mobile phase salt concentration of ammonium fluoride (NH₄F) are supplied. Details on the chromatographic gradient program and chromatographic data demonstrating the separation of α-estradiol and β-estradiol are provided. In addition, we supply the details on mass spectrometry parameters under the optimized conditions, relative responses of quantification and confirmation MS/MS transitions (QT/CT), and number of points present in UHPLC-MS/MS spectra. The sample preparation and instrumental analysis procedures under the retained conditions are also described. The herein dataset supports the research “Analysis of Environmental Protection Agency priority endocrine disruptor hormones and bisphenol A in tap, surface and wastewater by online concentration liquid chromatography tandem mass spectrometry” Goeury et al., 2019.