Protein deposition on contact lenses: The past, the present, and the future

Contact lenses as novel tear fluid sampling vehicles for total RNA isolation, precipitation, and amplification

The tear fluid is a readily accessible, potential source for biomarkers of disease and could be used to monitor the ocular response to contact lens (CL) wear or ophthalmic pathologies treated by therapeutic CLs. However, the tear fluid remains largely unexplored as a biomarker source for RNA-based molecular analyses. Using a rabbit model, this study sought to determine whether RNA could be collected from commercial CLs and whether the duration of CL wear would impact RNA recovery. The results were referenced to standardized strips of filtered paper (e.g., Shirmer Strips) placed in the inferior fornix. By performing total RNA isolation, precipitation, and amplification with commercial kits and RT-PCR methods, CLs were found to have no significant differences in RNA concentration and purity compared to Schirmer Strips. The study also identified genes that could be used to normalize RNA levels between tear samples. Of the potential control genes or housekeeping genes, GAPDH was the most stable. This study, which to our knowledge has never been done before, provides a methodology for the detection of RNA and gene expression changes from tear fluid that could be used to monitor or study eye diseases.

A promising 'single' and 'dual' drug-nanocomposite enriched contact lens for the management of glaucoma in response to the tear fluid enzyme

Glaucoma is a neurodegenerative condition that results in the damage of retinal ganglion cells due to elevated intraocular pressure (IOP). To curtail the limitations associated with conventional treatments such as eye drops and ocular suspensions, we have developed 'single' and 'dual' drug delivery contact lenses (CLs), that is, latanoprost (LP) and latanoprost-timolol (LP-TM) deliverable CLs, in response to lysozyme (Lyz), which is abundant in the lacrimal fluid. Since chitosan (CS) can entrap more of the drug and also undergo hydrolysis in the presence of Lyz, we have employed CS for the composite preparation. The CL fabrication was performed by free radical copolymerization of poly(2-hydroxyethyl methacrylate) (pHEMA) in the presence of the drug-loaded nanocomposite with UV-curing initiators using the pre-drug loading strategy. The surface morphological, optical and mechanical investigations confirmed the presence of the drugs, ≥80% transparency, the adequate flexibility and biocompatibility of both the CLs. The in vitro release experiments showed the release of 95.86% LP from LP-CL, and 83.87% LP and 86.70% TM from LP-TM-CL in the presence of 1.5 mg mL-1 of Lyz in 72 h. In vitro biocompatibility assay against human corneal epithelial (HCE) cells and ex vivo experiments on HET-CAM confirmed that the fabricated LP-CL and LP-TM-CL are well tolerated. Moreover, in vivo safety evaluations of CLs on New Zealand white rabbit eyes suggest no sign of irritation to the ocular tissues within 72 h of observation. Hence, the study suggests that the 'single' and 'dual' drug-loaded CLs could open a new avenue to manage glaucoma by maintaining mean diurnal IOP.

Low molecular weight chitosan oligosaccharides form stable complexes with human lactoferrin

Proteins in tears, including human lactoferrin (HLF), can be deposited and denatured on contact lenses, increasing the risk of microbial cell attachment to the lens and ocular complications. The surfactants currently used in commercial contact lens care solutions have low clearance ability for tear proteins. Chitosan oligosaccharide (COS) binds to a variety of proteins and has potential for use in protein removal, especially in contact lens care solutions. Here, we analyzed the interaction mechanism of COSs hydrolyzed from chitosan from different resources with HLF. The molecular weights (MWs) and concentrations of COSs were key factors for the formation of COS-HLF complexes. Lower MWs of COSs could form more stable COS-HLF complexes. COS from Aspergillus ochraceus had a superior effect on HLF compared with COS from shrimp and crab shell with the same MWs. In conclusion, COSs could bind to and cause a conformational change in HLF. Therefore, COSs, especially those with low MWs, have potential as deproteinizing agents in contact lens care solution.

Heavy metal deposition and parameter change of soft contact lenses by exposure to particulate matter : Parameter change of SCL due to exposure to PM and heavy metal deposition

BACKGROUND

Particulate matter (PM) is known to contain heavy metals and be harmful to the tissues and organs of the human body including the eyes. As such, in this study, the deposition of heavy metals from PM on soft contact lenses was examined, and changes in the lens parameters were further investigated.

METHODS

Six types of soft contact lenses were exposed to captured PM10 for eight hours. The central thickness, water content, refractive power, and oxygen transmissibility of each contact lens were measured after analyzing the amounts of six heavy metals adsorbed on the contact lenses.

RESULTS

Lead, manganese, barium, arsenic, vanadium, and cadmium were detected in the captured PM, and only lead was adsorbed on all soft contact lenses except senofilcon C. The largest deposition was 23.21 ± 0.70 (10- 3)µg/lens of the lead on lotrafilcon B. The oxygen transmissibility of nelfilcon A exhibited statistically significant changes, however, it was within the ISO standard tolerance. Nevertheless, changes in the central thickness, water content, and refractive power of each soft contact lens were not statistically significant.

CONCLUSIONS

This study revealed that a considerable amount of lead in PM10 was adsorbed on soft contact lenses. Amongst lens parameters, only oxygen transmissibility changed significantly. Thus, wearing soft contact lenses under high PM10 concentration might affect the physiology of the eyes.

Superhydrophilic Poly(2-hydroxyethyl methacrylate) Hydrogel with Nanosilica Covalent Coating: A Promising Contact Lens Material for Resisting Tear Protein Deposition and Bacterial Adhesion

Tear protein deposition and bacterial adhesion are the main drawbacks of the hydrogel contact lens. In this study, we developed a novel superhydrophilic poly(2-hydroxyethyl methacrylate) (NSCC-pHEMA) hydrogel with nanosilica covalent coating by the combination of colloidal silica immersion and dehydration treatment. The infrared spectroscopy and energy dispersive X-ray spectroscopy analyses confirmed the successful formation of Si-O covalent bonding between nanosilica and pHEMA hydrogel. This coating was highly stable against powerful sonication or long-term shaking immersion treatment. Among various NSCC-pHEMA hydrogels with different colloidal silica concentrations, the 7%NSCC-pHEMA hydrogel generated a superhydrophilic micro wrinkle surface with a root-mean-square roughness of 43.10 nm, which dramatically reduced the deposition of lysozyme and bovine serum albumin by 65% and 57%, respectively, and decreased the adhesion of S. aureus and E. coli by 59% and 66%, respectively, in comparison to the pHEMA hydrogel. However, the nanosilica coating had little effect on the mechanical properties, light transmittance, oxygen permeability, and equilibrium water content of the pHEMA hydrogel. NSCC-pHEMA hydrogels were nontoxic to both mouse fibroblasts (L929) and human immortalized keratinocytes (HaCaT). Thus, the superhydrophilic NSCC-pHEMA hydrogel is a potential contact lens material for resisting tear protein deposition and bacterial adhesion.

Biomimetic-Engineered Silicone Hydrogel Contact Lens Materials

Contact lenses are one of the most successful applications of biomaterials. The chemical structure of the polymers used in contact lenses plays an important role in determining the function of contact lenses. Different types of contact lenses have been developed based on the chemical structure of polymers. When designing contact lenses, materials scientists consider factors such as mechanical properties, processing properties, optical properties, histocompatibility, and antifouling properties, to ensure long-term wear with minimal discomfort. Advances in contact lens materials have addressed traditional issues such as oxygen permeability and biocompatibility, improving overall comfort, and duration of use. For example, silicone hydrogel contact lenses with high oxygen permeability were developed to extend the duration of use. In addition, controlling the surface properties of contact lenses in direct contact with the cornea tissue through surface polymer modification mimics the surface morphology of corneal tissue while maintaining the essential properties of the contact lens, a significant improvement for long-term use and reuse of contact lenses. This review presents the material science elements required for advanced contact lenses of the future and summarizes the chemical methods for achieving these goals.

Polysaccharides in contact lenses: From additives to bulk materials

As the number of applications has increased, so has the demand for contact lenses comfort. Adding polysaccharides to lenses is a popular way to enhance comfort for wearers. However, this may also compromise some lens properties. It is still unclear how to balance the variation of individual lens parameters in the design of contact lenses containing polysaccharides. This review provides a comprehensive overview of how polysaccharide addition impacts lens wear parameters, such as water content, oxygen permeability, surface wettability, protein deposition, and light transmittance. It also examines how various factors, such as polysaccharide type, molecular weight, amount, and mode of incorporation into lenses modulate these effects. Polysaccharide addition can improve some wear parameters while reducing others depending on the specific conditions. The optimal method, type, and amount of added polysaccharides depend on the trade-off between various lens parameters and wear requirements. Simultaneously, polysaccharide-based contact lenses may be a promising option for biodegradable contact lenses as concerns regarding environmental risks associated with contact lens degradation continue to increase. It is hoped that this review will shed light on the rational use of polysaccharides in contact lenses to make personalized lenses more accessible.

TFOS Lifestyle: Impact of contact lenses on the ocular surface

Several lifestyle choices made by contact lens wearers can have adverse consequences on ocular health. These include being non-adherent to contact lens care, sleeping in lenses, ill-advised purchasing options, not seeing an eyecare professional for regular aftercare visits, wearing lenses when feeling unwell, wearing lenses too soon after various forms of ophthalmic surgery, and wearing lenses when engaged in risky behaviors (e.g., when using tobacco, alcohol or recreational drugs). Those with a pre-existing compromised ocular surface may find that contact lens wear exacerbates ocular disease morbidity. Conversely, contact lenses may have various therapeutic benefits. The coronavirus disease-2019 (COVID-19) pandemic impinged upon the lifestyle of contact lens wearers, introducing challenges such as mask-associated dry eye, contact lens discomfort with increased use of digital devices, inadvertent exposure to hand sanitizers, and reduced use of lenses. Wearing contact lenses in challenging environments, such as in the presence of dust and noxious chemicals, or where there is the possibility of ocular trauma (e.g., sport or working with tools) can be problematic, although in some instances lenses can be protective. Contact lenses can be worn for sport, theatre, at high altitude, driving at night, in the military and in space, and special considerations are required when prescribing in such situations to ensure successful outcomes. A systematic review and meta-analysis, incorporated within the review, identified that the influence of lifestyle factors on soft contact lens dropout remains poorly understood, and is an area in need of further research. Overall, this report investigated lifestyle-related choices made by clinicians and contact lens wearers and discovered that when appropriate lifestyle choices are made, contact lens wear can enhance the quality of life of wearers.

Research Progress of Polymer Biomaterials as Scaffolds for Corneal Endothelium Tissue Engineering

Nowadays, treating corneal diseases arising from injury to the corneal endothelium necessitates donor tissue, but these corneas are extremely scarce. As a result, researchers are dedicating significant efforts to exploring alternative approaches that do not rely on donor tissues. Among these, creating a tissue-engineered scaffold on which corneal endothelial cells can be transplanted holds particular fascination. Numerous functional materials, encompassing natural, semi-synthetic, and synthetic polymers, have already been studied in this regard. In this review, we present a comprehensive overview of recent advancements in using polymer biomaterials as scaffolds for corneal endothelium tissue engineering. Initially, we analyze and present the key properties necessary for an effective corneal endothelial implant utilizing polymer biomaterials. Subsequently, we focus on various emerging biomaterials as scaffolds for corneal endothelium tissue engineering. We discuss their modifications (including natural and synthetic composites) and analyze the effect of micro- and nano-topological morphology on corneal endothelial scaffolds. Lastly, we highlight the challenges and prospects of these materials in corneal endothelium tissue engineering.

Jellylike Bumps on Scleral Contact Lens of a Child Aged 13 Years

This case report discusses the finding of calculi on the scleral contact lens of a 13-year-old child with a history of keratoconus.

Atropine-eluting silicone contact lenses for myopia control

Myopia, also known as nearsightedness, is one of the prime reasons for vision impairment worldwide. Atropine in topical ophthalmic solutions (e.g., 0.01% atropine sulfate eye drops) is the primary medical treatment for controlling myopia, especially for pseudomyopia or true myopia in rapid progress. However, aqueous atropine solution is unstable and easily breaks down to tropic acid, which will result in vision blur. Drug-eluting contact lenses (CLs) have been explored as a potentially superior alternative to effectively control the drug release and improve the drug efficacy. In this work, an atropine-eluting contact lens was developed by encapsulating an atropine implant in a silicon-based contact lens, towards functioning in vision correction and controlling myopia. The safety and effectiveness of this atropine-eluting contact lens were verified with rabbit and guinea pig models. The results showed that the lenses reduced the side effects like mydriasis and no other adverse events were observed in rabbit eyes. More importantly, atropine-loaded lenses could effectively delay the progress of form-deprivation myopia with guinea pig eyes as the model. Thus, we concluded that atropine-eluting CLs prepared by implantation technology may be an option for the treatment of myopia.

Effect of Deposition and Protease Digestion on the Ex Vivo Activity of Antimicrobial Peptide-Coated Contact Lenses

A clinical study of antimicrobial contact lenses containing the cationic peptide Mel4 was conducted. The few adverse events that occurred with this lens occurred on or after 13 nights of wear. The current study examined whether the Mel4 contact lenses lost activity during wear and the mechanism of this loss. Participants wore contact lenses for up to 13 nights. Lenses were tested for their ability to reduce the adhesion of Pseudomonas aeruginosa and Staphylococcus aureus. The amount of protein and lipid extracted from lenses was measured. The ability of trypsin to affect the antimicrobial activity of Mel4-coated contact lenses was measured. Mel4-coated contact lenses lost their antimicrobial activity at six nights of wear for both bacteria. The amount of lipids (13 ± 11 vs. 21 ± 14 μg/lens at 13 nights wear) and proteins (8 ± 4 vs. 10 ± 3 mg/lens at 13 nights of wear) extracted from lenses was not different between Mel4-coated and uncoated lenses, and was not different after three nights when antimicrobial activity was maintained and thirteen nights when they had lost activity (lipid: 25 ± 17 vs. 13 ± 11, p = 0.2; protein: 8 ± 1 vs. 8 ± 4 mg/lens, p = 0.4). Trypsin digestion eliminated the antimicrobial activity of Mel4-coated lenses. In summary, Mel4-coated contact lenses lost antibacterial activity at six nights of wear, and the most likely reason was proteolytic digestion of the peptide. Future studies will design and test proteolytically stable peptide mimics as coatings for contact lenses.

Effect of Contact Lens Solutions in Stabilizing the Activity of Tear Lysozyme

Purpose

Interactions between tear proteins and the interfaces of contact lenses can be complex and can influence contact lens wear success. Tear proteins, including lysozyme, function to maintain the balance of ocular surface homeostasis, as evidenced by the effects of its conformation relative to stabilizing the tear film and its potential impact on corneal epithelial cells. Contact lens manufacturers include components in lens care and blister package solutions to help stabilize the tear film and preserve homeostasis. This in vitro study was performed to evaluate the ability of daily disposable contact lens package solutions to stabilize lysozyme and preserve its native conformation under denaturing conditions.

Methods

Lysozyme was added to contact lens solutions sampled from kalifilcon A, etafilcon A, senofilcon A, narafilcon A, nelfilcon A, verofilcon A, delefilcon A, somofilcon A, and stenfilcon A blister packages, then mixed with the protein denaturant sodium lauryl sulfate. Lysozyme activity was evaluated by adding test solutions to a suspension of Micrococcus luteus. Native lysozyme lyses the Micrococcus luteus cell wall, which decreases suspension turbidity. Stabilization of lysozyme activity was determined by comparing suspension turbidity before and after exposure to test solutions.

Results

Lysozyme stabilization was 90.7% for kalifilcon A solution, a statistically significant improvement (p < 0.05) compared to phosphate buffered saline (PBS, negative control). No significant improvement was observed with any other contact lens solution (all lysozyme stabilization < 5.00%).

Conclusion

The representative tear protein lysozyme was significantly more stable in the novel kalifilcon A contact lens solution containing multiple moisturizers and osmoprotectants than in PBS or other daily disposable contact lens solutions. The lysozyme activity assay provides mechanistic evidence that the kalifilcon A contact lens solution can stabilize proteins under conditions that typically denature proteins, which may contribute to maintaining ocular surface homeostasis.

Nonfouling and Antibacterial Zwitterionic Contact Lenses Loaded with Heme-Mimetic Gallium Porphyrin for Treating Keratitis

Antifouling and antibacterial are two critical challenges in the development of contact lenses (CLs). Herein, we presented nonfouling and antibacterial bifunctionalized CLs by encapsulating cationic heme-mimetic gallium porphyrin (Ga-CHP) into zwitterionic-elastomeric-networked (ZEN) hydrogel. Results proved that the ZEN hydrogel showed excellent abilities to resist non-specific protein adsorption, bacterial adhesion, and biofilm formation. Moreover, Ga-CHP could be sustainably released and kill >99.9% planktonic bacteria and >99.9% mature biofilms. In vivo, the symptoms of bacterial keratitis in mice were significantly alleviated after wearing the CLs for 7 days via iron-blocking and photodynamic synergistic antibacterial therapy with the help of natural sunlight. This study highlights the nonfouling and antibacterial superiority of the Ga-CHP-functional zwitterionic CLs and proposes a portable yet efficient non-antibiotic keratitis treatment strategy.

Contact Lens Wear Induces Alterations of Lactoferrin Functionality in Human Tears

The tear film is a complex matrix composed of several molecular classes, from small metal ions to macromolecules. Contact lens (CL) wear can affect the protein homeostasis of the tear film, by accumulating deposits on the CL surface and/or altering their structural and functional properties. This work investigates the effect of CL wear on lactoferrin (Lf), one of the most abundant tear proteins, known as an unspecific biomarker of inflammation. Tears from eight volunteers were collected and analyzed after alternated periods of CL wear and without CL. The experimental approach is to probe Lf into unprocessed human tears by the peculiar fluorescence emission originating from complex formation of Lf with terbium (Tb³⁺) at the iron-binding sites. The experimental data indicate that CL wear does not significantly affect the total amount of Lf. On the other hand, Lf affinity for Tb³⁺ is reduced upon CL wear, suggesting relevant changes in Lf structure and possible alterations of protein functionality. Future studies based on this approach will help define CL features (material, lens-care solution, wearing time, etc.) with minimal effects on tear protein activity, in order to obtain more biocompatible and comfortable devices.

Structure-Property Relationship Based on the Amino Acid Composition of Recombinant Spider Silk Proteins for Potential Biomedical Applications

Improving biomaterials by engineering application-specific and adjustable properties is of increasing interest. Most of the commonly available materials fulfill the mechanical and physical requirements of relevant biomedical applications, but they lack biological functionality, including biocompatibility and prevention of microbial infestation. Thus, research has focused on customizable, application-specific, and modifiable surface coatings to cope with the limitations of existing biomaterials. In the case of adjustable degradation and configurable interaction with body fluids and cells, these coatings enlarge the applicability of the underlying biomaterials. Silks are interesting coating materials, e.g., for implants, since they exhibit excellent biocompatibility and mechanical properties. Herein, we present putative implant coatings made of five engineered recombinant spider silk proteins derived from the European garden spider Araneus diadematus fibroins (ADF), differing in amino acid sequence and charge. We analyzed the influence of the underlying amino acid composition on wetting behavior, blood compatibility, biodegradability, serum protein adsorption, and cell adhesion. The outcome of the comparison indicates that spider silk coatings can be engineered for explicit biomedical applications.

Hyaluronic Acid: Its Versatile Use in Ocular Drug Delivery with a Specific Focus on Hyaluronic Acid-Based Polyelectrolyte Complexes

Extensive research is currently being conducted into novel ocular drug delivery systems (ODDS) that are capable of surpassing the limitations associated with conventional intraocular anterior and posterior segment treatments. Nanoformulations, including those synthesised from the natural, hydrophilic glycosaminoglycan, hyaluronic acid (HA), have gained significant traction due to their enhanced intraocular permeation, longer retention times, high physiological stability, inherent biocompatibility, and biodegradability. However, conventional nanoformulation preparation methods often require large volumes of organic solvent, chemical cross-linkers, and surfactants, which can pose significant toxicity risks. We present a comprehensive, critical review of the use of HA in the field of ophthalmology and ocular drug delivery, with a discussion of the physicochemical and biological properties of HA that render it a suitable excipient for drug delivery to both the anterior and posterior segments of the eye. The pivotal focus of this review is a discussion of the formation of HA-based nanoparticles via polyelectrolyte complexation, a mild method of preparation driven primarily by electrostatic interaction between opposing polyelectrolytes. To the best of our knowledge, despite the growing number of publications centred around the development of HA-based polyelectrolyte complexes (HA-PECs) for ocular drug delivery, no review articles have been published in this area. This review aims to bridge the identified gap in the literature by (1) reviewing recent advances in the area of HA-PECs for anterior and posterior ODD, (2) describing the mechanism and thermodynamics of polyelectrolyte complexation, and (3) critically evaluating the intrinsic and extrinsic formulation parameters that must be considered when designing HA-PECs for ocular application.

Cell-repellent polyampholyte for conformal coating on microstructures

Repellent coatings are critical for the development of biomedical and analytical devices to prevent nonspecific protein and cell adhesion. In this study, prevelex (polyampholytes containing phosphate and amine units) was synthesized for the fine coating of microdevices for cell culture. The dip-coating of the prevelex on hydrophobic substrates altered their surfaces to be highly hydrophilic and electrically neutral. The range of prebake temperature (50–150 °C) after dip-coating was moderate and within a preferable range to treat typical materials for cell culture such as polystyrene and polydimethylsiloxane. Scanning electron microscopy revealed a conformal and ultra-thin film coating on the micro/nano structures. When compared with poly(2-hydroxyethyl methacrylate) and poly(2-methacryloyloxyethyl phosphorylcholine), prevelex exhibited better characteristics for coating on microwell array devices, thereby facilitating the formation of spheroids with uniform diameters using various cell types. Furthermore, to examine cellular functionalities, mouse embryonic epithelial and mesenchymal cells were seeded in a prevelex-coated microwell array device. The two types of cells formed hair follicle germ-like aggregates in the device. The aggregates were then transplanted to generate de novo hair follicles in nude mice. The coating material provided a robust and fine coating approach for the preparation of non-fouling surfaces for tissue engineering and biomedical applications.

Poly(2-hydroxyethyl methacrylate-co-quaternary ammonium salt chitosan) hydrogel: A potential contact lens material with tear protein deposition resistance and antimicrobial activity

Tear protein deposition resistance and antimicrobial property are two challenges of conventional poly(2-hydroxyethyl methacrylate) (pHEMA) contact lenses. In this work, we developed a poly(2-hydroxyethyl methacrylate-co-quaternary ammonium salt chitosan) hydrogel, named as p(HEMA-co-mHACC) hydrogel, using acryloyl HACC (mHACC) as a macromolecular crosslinker. With increasing the acryloyl substitution degree (14-29%) or mHACC content (2-11%), the hydrogel showed an enhanced tensile strength (432-986 kPa) and Young's modulus (360-1158 kPa), a decreased elongation at break (242-84%), and an increased visible light transmittance (0-95%). At an optimal acryloyl substitution degree of 26%, with the increase of mHACC content from 2% to 11%, p(HEMA-co-mHACC) hydrogel presented a decreased water contact angle from 84.6 to 55.3 degree, an increased equilibrium water content from 38% to 45%, and an enhanced oxygen permeability from 8.5 to 13.5 barrer. Due to the enhancement in surface hydrophilicity and electropositivity, p(HEMA-co-mHACC) hydrogel remarkably reduced the deposition of lysozyme, but little affected the adsorption of BSA, depending on the hydrophilic/hydrophobic and electrostatic interactions. The antimicrobial test against Staphylococcus aureus and Escherichia coli showed that p(HEMA-co-mHACC) hydrogel presented an 8-32 times higher germicidal ability than pHEMA hydrogel, indicative of a better antimicrobial activity. The in vitro cell culture of mouse NIH3T3 fibroblasts and immortalized human keratinocytes showed that p(HEMA-co-mHACC) hydrogel was non-toxic. Thus, p(HEMA-co-mHACC) hydrogel with tear protein deposition resistance and antimicrobial activity is a potential candidate for contact lenses.

Analysis of Vicinal Water in Soft Contact Lenses Using a Combination of Infrared Absorption Spectroscopy and Multivariate Curve Resolution

In this paper, we propose a new spectroscopic method to explore the behavior of molecules near polymeric molecular networks of water-containing soft materials such as hydrogels. We demonstrate the analysis of hydrogen bonding states of water in the vicinity of hydrogels (soft contact lenses). In this method, we apply force to hydrated contact lenses to deform them and to modulate the ratio between the signals from bulk and vicinal regions. We then collect spectra at different forces. Finally, we extracted the spectra of the vicinal region using the multivariate curve resolution-alternating least square (MCR-ALS) method. We report the hydration states depending on the chemical structures of hydrogels constituting the contact lenses.

Addressing common myths and misconceptions in soft contact lens practice

Advances in contact lens technology over the past 50 years since the commercialisation of the first soft lenses in 1971 have been incredible, with significant changes in contact lens materials, frequency of replacement, care systems and lens designs occurring. However, despite the widespread availability of contact lenses, penetration rates for those who need vision correction remain in the low single digits and many practitioners seem to hold on to concepts around the potential value of contact lenses that appear based in the dim and distant past and are certainly no longer valid today. This review addresses 10 common 'myths and misconceptions' around soft contact lenses using an evidence-based approach that can hopefully dispel some of these incorrect assumptions.

Correlation between surface friction and the hydrophobicity of structure-related side-chain exposure of albumin on contact lens

The management of contact lens discomfort remains a challenge leading to the increased contact lens dropout rates. Tear protein accumulates on the lens surfaces with different configurations observed are correlated to the lens friction, with the improved comfort experienced by reduced surface friction in the eye. However, protein adsorption is a complex process with the combined protein-protein interactions (PPI) and protein-surface interactions (PSI) involved, which is difficult to explain the complicated tribological behavior in terms of protein structural shifts alone on lens surfaces. On the other hand, the type of solvent-exposed side chains from specific protein conformations on lens surfaces should be more important to the lens friction involved. We aim to investigate the correlation between the structure-related side-chain exposure and corresponding lens friction of adsorbed tear proteins on lens surfaces under varied PPI and PSI. Albumin was the model protein adsorbed onto the conventional lens material. Such as polymethylmethacrylate (PMMA) or the poly-2-hydroxyethyl methacrylate (PHEMA) surfaces applied here. Adsorption was conducted under varying protein solution concentrations to saturate the model surface to change the PPI effects over a wide range. Our results indicate that PPI effects help stabilize protein structures on both surfaces. When PPI is minimized, a distinct correlation was observed between the surface friction and the hydrophobicity of structure-related side-chain exposure of albumin on lens surfaces depending on the different PSI involved. At a fundamental understanding, our results would provide insights for developing new lens materials or the lens care solution designs to reduce the lens discomfort.

The effects of surface topography modification on hydrogel properties

Hydrogel has been an attractive biomaterial for tissue engineering, drug delivery, wound healing, and contact lens materials, due to its outstanding properties, including high water content, transparency, biocompatibility, tissue mechanical matching, and low toxicity. As hydrogel commonly possesses high surface hydrophilicity, chemical modifications have been applied to achieve the optimal surface properties to improve the performance of hydrogels for specific applications. Ideally, the effects of surface modifications would be stable, and the modification would not affect the inherent hydrogel properties. In recent years, a new type of surface modification has been discovered to be able to alter hydrogel properties by physically patterning the hydrogel surfaces with topographies. Such physical patterning methods can also affect hydrogel surface chemical properties, such as protein adsorption, microbial adhesion, and cell response. This review will first summarize the works on developing hydrogel surface patterning methods. The influence of surface topography on interfacial energy and the subsequent effects on protein adsorption, microbial, and cell interactions with patterned hydrogel, with specific examples in biomedical applications, will be discussed. Finally, current problems and future challenges on topographical modification of hydrogels will also be discussed.

Physiological fluid interfaces: Functional microenvironments, drug delivery targets, and first line of defense

Fluid interfaces, i.e. the boundary layer of two liquids or a liquid and a gas, play a vital role in physiological processes as diverse as visual perception, oral health and taste, lipid metabolism, and pulmonary breathing. These fluid interfaces exhibit a complex composition, structure, and rheology tailored to their individual physiological functions. Advances in interfacial thin film techniques have facilitated the analysis of such complex interfaces under physiologically relevant conditions. This allowed new insights on the origin of their physiological functionality, how deviations may cause disease, and has revealed new therapy strategies. Furthermore, the interactions of physiological fluid interfaces with exogenous substances is crucial for understanding certain disorders and exploiting drug delivery routes to or across fluid interfaces. Here, we provide an overview on fluid interfaces with physiological relevance, namely tear films, interfacial aspects of saliva, lipid droplet digestion and storage in the cell, and the functioning of lung surfactant. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe therapies and drug delivery approaches targeted at fluid interfaces. STATEMENT OF SIGNIFICANCE: Fluid interfaces are inherent to all living organisms and play a vital role in various physiological processes. Examples are the eye tear film, saliva, lipid digestion & storage in cells, and pulmonary breathing. These fluid interfaces exhibit complex interfacial compositions and structures to meet their specific physiological function. We provide an overview on physiological fluid interfaces with a focus on interfacial phenomena. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe novel therapies and drug delivery approaches targeted at fluid interfaces. This sets the scene for ocular, oral, or pulmonary surface engineering and drug delivery approaches.

Evaluation of silicone hydrogel contact lenses based on poly(dimethylsiloxane) dialkanol and hydrophilic polymers

Silicone hydrogel lenses were prepared by copolymerizing PDMS-PEGMA macromer (PGP) with various combinations of DMA, NVP, and PEGMA through UV initiated polymerization process. The resultant PGP macromer were characterized by gel permeation chromatography (GPC), and scanning electron microscope (SEM-EDS). Characterization of all the resultant co-polymers included Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), equilibrium water content (EWC), oxygen permeability (Dk), optical transparency, contact angle, mechanical properties, zeta potential, protein deposition, and cytotoxicity. The results show that higher content of hydrophilic polymers increased water uptake ability as well as improved hydrophilicity and modulus of silicone hydrogel lenses; however, oxygen permeability decreased with the decrease of PDMS content (145 barrers of PGP to 37 barrers of DP0). In addition, these silicone hydrogel lenses exhibited relatively optical transparency, anti-protein deposition, and non-cytotoxic according to an in vitro L929 fibroblast assay. Therefore, these silicone hydrogel polymers would be applicable for making contact lens.

Hydrogels-based ophthalmic drug delivery systems for treatment of ocular diseases

An increasing number of people worldwide are affected by eye diseases, eventually leading to visual impairment or complete blindness. Conventional treatment involves the use of eye drops. However, these formulations often confer low ocular bioavailability and frequent dosing is required. Therefore, there is an urgent need to develop more effective drug delivery systems to tackle the current limitations. Hydrogels are multifunctional ophthalmic drug delivery systems capable of extending drug residence time and sustaining release of drugs. In this review, common ocular diseases and corresponding therapeutic drugs are briefly introduced. In addition, various types of hydrogels reported for ophthalmic drug delivery, including in-situ gelling hydrogels, contact lenses, low molecular weight supramolecular hydrogels, cyclodextrin/poly (ethylene glycol)-based supramolecular hydrogels and hydrogel-forming microneedles, are summarized. Besides, marketed hydrogel-based opthalmic formulations and clinical trials are also highlighted. Finally, critical considerations regarding clinical translation of biologics-loaded hydrogels are discussed.

Resveratrol-Loaded Hydrogel Contact Lenses with Antioxidant and Antibiofilm Performance

Contact lenses (CLs) are prone to biofilm formation, which may cause severe ocular infections. Since the use of antibiotics is associated with resistance concerns, here, two alternative strategies were evaluated to endow CLs with antibiofilm features: copolymerization with the antifouling monomer 2-methacryloyloxyethyl phosphorylcholine (MPC) and loading of the antioxidant resveratrol with known antibacterial activity. MPC has, so far, been used to increase water retention on the CL surface (Proclear^® 1 day CLs). Both poly(hydroxyethyl methacrylate) (HEMA) and silicone hydrogels were prepared with MPC covering a wide range of concentrations (from 0 to 101 mM). All hydrogels showed physical properties adequate for CLs and successfully passed the hen’s egg-chorioallantoic membrane (HET-CAM) test. Silicone hydrogels had stronger affinity for resveratrol, with higher loading and a slower release rate. Ex vivo cornea and sclera permeability tests revealed that resveratrol released from the hydrogels readily accumulated in both tissues but did not cross through. The antibiofilm tests against Pseudomonas aeruginosa and Staphylococcus aureus evidenced that, in general, resveratrol decreased biofilm formation, which correlated with its concentration-dependent antibacterial capability. Preferential adsorption of lysozyme, compared to albumin, might also contribute to the antimicrobial activity. In addition, importantly, the loading of resveratrol in the hydrogels preserved the antioxidant activity, even against photodegradation. Overall, the designed hydrogels can host therapeutically relevant amounts of resveratrol to be sustainedly released on the eye, providing antibiofilm and antioxidant performance.

Binding affinity of benzalkonium chloride on contact lens surfaces and the effects on their physical properties

Benzalkonium chloride (BKC) is a cationic surfactant used as a component in ophthalmic eye drops. The effects of BKC on the eye and the simple binding of BKC on the contact lens surface have been reported in other studies. However, the exact value of the BKC binding affinity on the contact lens surfaces and its effects on the physical properties of contact lenses have not been studied. Here, the binding affinity of BKC toward two types of contact lenses, those with the wetting agent polyvinylpyrrolidone (PVP) and those without, was calculated. In addition, the refractive power, UV-vis transmittance, contact angle, water content, base curve, and diameter of the contact lenses after treatment with BKC were examined to evaluate the effects of its adsorption on the contact lens. We found that the maximum amount of adsorbed BKC was 2.88 mM for the contact lens without PVP whereas it was 2.32 mM for that with PVP. In contrast, the BKC binding affinities were similar. Crucially, the physical properties of the contact lens changed significantly because of the adsorption of BKC. Although BKC is a widely used preservative, our results suggest that use of PVP-containing contact lenses reduces BKC adsorption and discomfort.

In vitro analysis of the interaction of tear film inflammatory markers with contemporary contact lens materials

PURPOSE

Several clinical studies have suggested that reusable silicone hydrogel contact lens materials exhibit a two-times increased rate of corneal infiltrative events compared to reusable hydrogels. One potential factor contributing to this complication relates to the differential uptake of tear film-based pro-inflammatory cytokines. The purpose of this study was to use an in vitro assay to investigate whether four pro-inflammatory cytokines differed in their uptake onto six contemporary contact lens materials.

METHODS

Conventional hydrogel (etafilcon A, omafilcon A) and silicone hydrogel (balafilcon A, comfilcon A, senofilcon A, somofilcon A) contact lens materials were soaked in solutions containing pro-inflammatory cytokines IL-1β, IL-6, IL-8 and TNF-α. Samples of the soaking solutions were collected over various time points and analyzed using the Meso Scale Discovery system, which served as a measurement of cytokine uptake onto the contact lens materials.

RESULTS

Both conventional hydrogels (etafilcon A, omafilcon A) and two of the four silicone hydrogels tested (balafilcon A, comfilcon A), exhibited some uptake of IL-1β, IL-8 or TNF-α (p < 0.05). Senofilcon A and somofilcon A did not exhibit uptake of any of these cytokines (p > 0.05). There was no uptake of IL-6 onto any of the contact lens materials investigated (p > 0.05).

CONCLUSION

The contact lens materials tested did not exhibit any uptake of IL-6 and furthermore, did not exhibit more than 10 ± 3 % to 25 ± 12 % uptake of IL-1β, IL-8 or TNF-α. Numerous factors could contribute to the reported increase in corneal infiltrative events with reusable silicone hydrogel materials, however, based on these results, it appears that uptake of these four cytokines are unlikely to contribute to this finding.

CLEAR - Contact lens technologies of the future

Contact lenses in the future will likely have functions other than correction of refractive error. Lenses designed to control the development of myopia are already commercially available. Contact lenses as drug delivery devices and powered through advancements in nanotechnology will open up further opportunities for unique uses of contact lenses. This review examines the use, or potential use, of contact lenses aside from their role to correct refractive error. Contact lenses can be used to detect systemic and ocular surface diseases, treat and manage various ocular conditions and as devices that can correct presbyopia, control the development of myopia or be used for augmented vision. There is also discussion of new developments in contact lens packaging and storage cases. The use of contact lenses as devices to detect systemic disease has mostly focussed on detecting changes to glucose levels in tears for monitoring diabetic control. Glucose can be detected using changes in colour, fluorescence or generation of electric signals by embedded sensors such as boronic acid, concanavalin A or glucose oxidase. Contact lenses that have gained regulatory approval can measure changes in intraocular pressure to monitor glaucoma by measuring small changes in corneal shape. Challenges include integrating sensors into contact lenses and detecting the signals generated. Various techniques are used to optimise uptake and release of the drugs to the ocular surface to treat diseases such as dry eye, glaucoma, infection and allergy. Contact lenses that either mechanically or electronically change their shape are being investigated for the management of presbyopia. Contact lenses that slow the development of myopia are based upon incorporating concentric rings of plus power, peripheral optical zone(s) with add power or non-monotonic variations in power. Various forms of these lenses have shown a reduction in myopia in clinical trials and are available in various markets.

Adhesion of Pollen Particles to Daily Disposable Soft Contact Lenses

PURPOSE

Pollen and proteins attached to soft contact lenses (SCLs) exacerbate allergic conjunctivitis. The material of SCLs may affect the pollen adhesion to the SCLs. The factors associated with the number of pollen particles that are adherent to daily disposable SCL were investigated.

METHODS

Pollen particles were experimentally exposed to the contact lens surface of 12 types of SCLs for 1 hour, and the SCLs were washed and rinsed with a physiological saline (n=10 for each SCL type). A total of 120 contact lenses were used in this study. The pollen particles attached to the SCL were observed and photographed under a microscope. The influence of the materials of the SCLs on the degree of pollen adhesion were investigated.

RESULTS

The number of residual pollen particles attached to SCLs was in the range from 0-293/area of 200×200 µm. Percentage of pollen adhesion area of the surface of the SCL was in the range from 0.01% to 3.25%. There were significant differences in both the number and adhesion area of pollen particles among the 12 types of SCLs tested (P<0.0001 and P<0.0001, respectively). The number of pollen particles adhered to SCLs was significantly higher in colored SCLs than clear SCLs (unpaired t-test, p<0.001). The portion of pollen adhesion area was the lowest in the silicone hydrogel SCLs made with delefilcon-A (0.01 ± 0.02%).

CONCLUSION

Pollen adhesion in daily disposable SCLs depends on the characteristics and materials of the SCLs and was high in colored SCLs and lowest in delefilcon-A silicone hydrogel SCL. These results suggest that colored SCLs are not preferred during pollen season.

Investigating the Synergistic Interactions of Surface Immobilized and Free Natural Ocular Lubricants for Contact Lens Applications: A Comparative Study between Hyaluronic Acid and Proteoglycan 4 (Lubricin)

The main reasons for the discontinuation of contact lens wear are ocular dryness and discomfort. Proteoglycan 4 (PRG4), a mucinous glycoprotein, and hyaluronic acid (HA), a nonsulfated linear glycosaminoglycan, are naturally present in the eye and contribute to ocular hydration and lubrication. This study aimed to investigate the impact of the structure of the recombinant human PRG4 (rhPRG4)/HA complex on contact lens properties, when one agent is grafted and the counterpart is physisorbed on the surface of model conventional or silicone contact lens materials. Investigation of the wettability, water retention, antifouling, and boundary lubricant properties of the prepared hydrogels showed that the rhPRG4/HA interactions varied with the rhPRG/HA configuration on the hydrogel surface as well as the composition of the underlying substrate used. The rhPRG4-physisorbed/HA-grafted sample was characterized by better antifouling and boundary lubricant properties on the model conventional hydrogels, while the HA-physisorbed/rhPRG4-grafted sample exhibited improved surface wettability, antifouling, and water-retentive properties on the model silicone hydrogels. The results of this study contribute to the design of biomimetic contact lens surfaces that work synergistically with ocular fluid-phase biological agents to enhance compatibility between the contact lens and the ocular environment, alleviating dry eye symptoms and improving comfort.

Contact Lens Wear and Dry Eye: Beyond the Known

Contact lens wear is one of the relevant risk factors for dry eye, and the coexistence of dry eye poses a serious challenge in patients wearing contact lenses. The Tear Film and Ocular Surface Society Workshop addressed issues around the topic of discomfort in contact lens wear, which is a major cause for discontinuation of contact lens wear, and termed this condition as contact lens discomfort. With the rapid advances in contact lens technology and pharmacological agents and deeper understanding of this field, updating the "new normal" beyond what is known as standard is essential. This review aims to summarize the latest topics in contact lens and dry eye that would be useful for clinicians and contact lens practitioners.

In vitro Evaluation of the Location of Cholesteryl Ester Deposits on Monthly Replacement Silicone Hydrogel Contact Lens Materials

Purpose

The deposition profile of cholesteryl ester on the surface and throughout the matrix of silicone hydrogel contact lens (CL) materials was determined under conditions that mimic a daily wear regimen.

Methods

In this in vitro study, four SiHy CL materials (senofilcon C, lotrafilcon B, comfilcon A and samfilcon A) were incubated in an artificial tear solution (ATS) for up to 30 days. CL incubation was alternated between the ATS (16 hours) and a multipurpose care regimen (8 hours). The ATS included fluorescently tagged cholesteryl ester (5-cholesten-3ß-ol 6-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]caproate; CE-NBD) and confocal laser scanning microscopy visualized the distribution of the lipid through the CLs.

Results

The distribution of CE-NBD was homogenous from the anterior to posterior surface in senofilcon C and comfilcon A, at all time points. For lotrafilcon B and samfilcon A, CE-NBD localization was heterogeneous, with greater amounts on the surfaces on Day 1 and Day 14 compared to the lens matrix; however, differences in concentration between the surface and bulk diminished by Day 30.

Conclusion

The distribution of the non-polar lipid CE-NBD varied with lens material chemistry. While some lens materials deposited the lipid primarily on the surface after 16 hours of exposure, all materials exhibited a homogenous distribution after one month.

A Novel Approach to Increase the Oxygen Permeability of Soft Contact Lenses by Incorporating Silica Sol

This study presents a novel approach to increase the oxygen permeability of hydrogel by the addition of silica sol. Herein, 2-hydroxyethyl methacrylate (HEMA) was copolymerized with N-vinyl-2-pyrrolidone (NVP) after mixing with silica sol. The resultant hydrogel was subject to characterizations including Fourier-transform infrared (FTIR), equilibrium water content (EWC), contact angle, optical transmittance, oxygen permeability (Dk), tensile test, anti-deposition of proteins, and cytotoxicity. The results showed that with the increase of silica content, the Dk values and Young’s moduli increased, the optical transmittance decreased slightly, whereas the EWC and contact angle, and protein deposition were not much affected. Moreover, the cytotoxicity of the resultant poly(HEMA-co-NVP)-SNPs indicated that the presence of silica sol was non-toxic and caused no effect to the growth of L929 cells. Thus, this approach increased the Dk of soft contact lenses without affecting their hydrophilicity.

Irreversible multilayer adsorption of semirigid k-mers deposited on one-dimensional lattices

Irreversible multilayer adsorption of semirigid k-mers on one-dimensional lattices of size L is studied by numerical simulations complemented by exhaustive enumeration of configurations for small lattices. The deposition process is modeled by using a random sequential adsorption algorithm, generalized to the case of multilayer adsorption. The paper concentrates on measuring the jamming coverage for different values of k-mer size and number of layers n. The bilayer problem (n≤2) is exhaustively analyzed, and the resulting tendencies are validated by the exact enumeration techniques. Then, the study is extended to an increasing number of layers, which is one of the noteworthy parts of this work. The obtained results allow the following: (i) to characterize the structure of the adsorbed phase for the multilayer problem. As n increases, the (1+1)-dimensional adsorbed phase tends to be a "partial wall" consisting of "towers" (or columns) of width k, separated by valleys of empty sites. The length of these valleys diminishes with increasing k; (ii) to establish that this is an in-registry adsorption process, where each incoming k-mer is likely to be adsorbed exactly onto an already adsorbed one. With respect to percolation, our calculations show that the percolation probability vanishes as L increases, being zero in the limit L→∞. Finally, the value of the jamming critical exponent ν_{j} is reported here for multilayer adsorption: ν_{j} remains close to 2 regardless of the considered values of k and n. This finding is discussed in terms of the lattice dimensionality.

Correlation between Tribological Properties and the Quantified Structural Changes of Lysozyme on Poly (2-hydroxyethyl methacrylate) Contact Lens

The ocular discomfort is the leading cause of contact lens wear discontinuation. Although the tear proteins as a lubricant might improve contact lens adaptation, some in vitro studies suggested that the amount of adsorbed proteins could not simply explain the lubricating performance of adsorbed proteins. The purpose of this study was to quantify the structural changes and corresponding ocular lubricating properties of adsorbed protein on a conventional contact lens material, poly (2-hydroxyethyl methacrylate) (pHEMA). The adsorption behaviors of lysozyme on pHEMA were determined by the combined effects of protein–surface and protein–protein interactions. Lysozyme, the most abundant protein in tear, was first adsorbed onto the pHEMA surface under widely varying protein solution concentrations to saturate the surface, with the areal density of the adsorbed protein presenting different protein–protein effects within the layer. These values were correlated with the measured secondary structures, and corresponding friction coefficient of the adsorbed and protein covered lens surface, respectively. The decreased friction coefficient value was an indicator of the lubricated surfaces with improved adaptation. Our results indicate that the protein–protein effects help stabilize the structure of adsorbed lysozyme on pHEMA with the raised friction coefficient measured critical for the innovation of contact lens material designs with improved adaptation.

Poly(2-hydroxyethyl methacrylate)/β-cyclodextrin-hyaluronan contact lens with tear protein adsorption resistance and sustained drug delivery for ophthalmic diseases

A series of poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels containing cross-linked β-cyclodextrin-hyaluronan (β-CD-crHA), with tear protein adsorption resistance and sustained drug delivery, were developed as contact lens materials for eye diseases. β-CD-HA was synthesized from aminated β-CD and HA and then crosslinked within pHEMA hydrogel using polyethylenimine as a crosslinker. The synthesized β-CD-HA was characterized by ¹H NMR analysis, and β-CD-crHA immobilized in pHEMA hydrogel was confirmed by FT-IR, SEM, and AFM analyses. The incorporation of β-CD-crHA significantly improved the surface hydrophilicity, water uptake ability, oxygen permeability, and flexibility of pHEMA hydrogel, but did not compromise light transmission. pHEMA/β-CD-crHA hydrogels not only decreased the tear protein adsorption because of the electrostatically mutual repulsion and the improved hydrophilicity, leading to the reduced adhesion of Staphylococcus aureus on the hydrogel surface, but also enhanced the encapsulation capacity and the sustainable delivery of diclofenac due to the formation of inclusion complexes between β-CD and drugs. All the hydrogels were nontoxic to 3T3 mouse fibroblasts by in vitro cell viability analysis. Among these hydrogels with different β-CD-crHA contents, pHEMA/β-CD-crHA₁₀ hydrogel showed the lowest water contact angle of 52 °, the highest water content of 65%, the largest Dk value of 36.4 barrer, and the optimal modulus of 1.8 MPa, as well as a good light transmission of over 90%. The in vivo conjunctivitis treatment of rabbits for 72 h indicated that drug-loaded pHEMA/β-CD-crHA₁₀ hydrogel presented a better therapeutic effect than both one dose administration of drug solution per day and drug-loaded pHEMA hydrogel. Thus, pHEMA/β-CD-crHA₁₀ hydrogel is a promising contact lens material for ophthalmic diseases. STATEMENT OF SIGNIFICANCE: Topical eye drops are currently the most popular treatment for ophthalmic diseases, but frequent dosing is necessary to acquire the desirable clinical effect at the expense of systemic side-effects. Drug-loaded contact lenses, as an alternative of eye drops, possess many good performances and show potential applications. However, the sustained drug delivery and the tear protein adsorption resistance are still challenging for contact lenses. Hence, we developed a novel pHEMA/β-CD-crHA hydrogel by incorporating β-CD-crHA crosslinked network into pHEMA hydrogel. Besides the improvements in surface hydrophilicity, water uptake ability, oxygen permeability, and flexibility, pHEMA/β-CD-crHA hydrogel also reduced the adsorption of tear proteins and the adhesion of Staphylococcus aureus, enhanced the drug encapsulation, and prolonged the drug delivery, with better effect in the conjunctivitis treatment of rabbits. Thus, pHEMA/β-CD-crHA hydrogel is a potential contact lens material for treating ophthalmic diseases.

Lipid deposition on contact lenses in symptomatic and asymptomatic contact lens wearers

PURPOSE

Lipid deposition on contact lenses (CL) has traditionally been believed to reduce comfort during CL wear. The purpose of this study was to quantify lipid deposition on CL in a group of symptomatic and asymptomatic adapted CL wearers.

METHODS

This was a single-masked, randomized clinical trial. Only confirmed symptomatic (comfortable lens wear time (CWT) < 8 h and a noticeable reduction in comfort over the course of the day) and asymptomatic (CWT > 10 h and minimal reduction in comfort over the course of the day) participants were recruited to participate in the study. Participants wore senofilcon A lenses in combination with a polyquaternium-based care solution (OPTI-FREE Replenish). Worn CL samples were collected on Day 14. Deposited lipid amounts from the lenses (including cholesteryl ester, cholesterol and triolein) were quantified using a liquid chromatography-mass spectrometry technique.

RESULTS

Lipid deposition was significantly higher in CL extracts of asymptomatic wearers compared to the symptomatic wearers for all lipid types quantified, including cholesteryl ester (2.1 ± 0.6 vs 1.6 ± 0.5 log μg/lens), cholesterol (1.5 ± 0.3 vs 1.1 ± 0.3 log μg/lens) and triolein (0.3 ± 0.2 vs 0.1 ± 0.1 log μg/lens) (all p < 0.002). The amount of cholesteryl ester deposited was greatest (p = 0.0001), followed by cholesterol, then triolein, for both the asymptomatic and symptomatic groups (both p = 0.0001).

CONCLUSION

This study demonstrated that the asymptomatic group deposited a significantly greater amount of lipid on their CL. Although lipid levels measured are considered low to trigger any observable clinical deposition, they may influence other clinical outcomes, particularly comfort.

Contact lens-based lysozyme detection in tear using a mobile sensor

We report a method for sensing analytes in tear-fluid using commercial contact lenses (CLs) as sample collectors for subsequent analysis with a cost-effective and field-portable reader. In this study we quantify lysozyme, the most prevalent protein in tear fluid, non-specifically bound to CLs worn by human participants. Our mobile reader uses time-lapse imaging to capture an increasing fluorescent signal in a standard well-plate, the rate-of-change of which is used to indirectly infer lysozyme concentration through the use of a standard curve. We empirically determined the best-suited CL material for our sampling procedure and assay, and subsequently monitored the lysozyme levels of nine healthy human participants over a two-week period. Of these participants who were regular CL wearers (6 out of 9), we observed an increase in lysozyme levels from 6.89 ± 2.02 μg mL-1 to 10.72 ± 3.22 μg mL-1 (mean ± SD) when inducing an instance of digital eye-strain by asking them to play a game on their mobile-phones during the CL wear-duration. We also observed a lower mean lysozyme concentration (2.43 ± 1.66 μg mL-1) in a patient cohort with dry eye disease (DED) as compared to the average monitoring level of healthy (no DED) human participants (6.89 ± 2.02 μg mL-1). Taken together, this study demonstrates tear-fluid analysis with simple and non-invasive sampling steps along with a rapid, easy-to-use, and cost-effective measurement system, ultimately indicating physiological differences in human participants. We believe this method could be used in future tear-fluid studies, even supporting multiplexed detection of a panel of tear biomarkers toward improved diagnostics and prognostics as well as personalized mobile-health applications.

Thirty years of 'quiet eye' with etafilcon A contact lenses

Frequent replacement contact lenses made from the etafilcon A hydrogel lens material were introduced onto the market over 30 years ago, and etafilcon A remains the most widely used hydrogel lens material today. Although the prescribing of silicone hydrogel lenses is increasing, millions of lens wearers globally have been wearing hydrogel lenses for many years and exhibit a physiologically-stable 'quiet eye', with a low profile of adverse events. Hydrogel lenses are demonstrated to maintain a low inflammatory response and infection risk profile during daily wear, which in the case of etafilcon A, may be related to its low modulus, and the naturally-protective, anti-microbial, non-denatured lysozyme absorbed into the lens from the tear fluid. Although improved corneal physiology from decreased hypoxia with silicone hydrogel lenses is well accepted, equivalent levels of corneal oxygenation are maintained during daily wear of low to medium powered hydrogel lenses, which do not impede the daily corneal de-swelling process, and do not induce clinically significant changes in ocular health. Therefore, hydrogel lenses remain an important alternative for daily wear in modern contact lens practice.

Stable Fabrication of Zwitterionic Coating Based on Copper-Phenolic Networks on Contact Lens with Improved Surface Wettability and Broad-Spectrum Antimicrobial Activity

Ocular dryness and contact lens(CL)-related microbial keratitis (MK) are two major risks of wearing CLs. The development of multifunctional surface coating for CLs with excellent hydrating and antimicrobial properties is a practical strategy to improve the comfort of CL wearers and to prevent corneal infection. Here, we develop zwitterionic and antimicrobial metal-phenolic networks (MPNs) based on the coordination of copper ions (Cu^II) and the poly(carboxylbetaine-co-dopamine methacrylamide) copolymer (PCBDA), which can be easily one-step prepared onto CLs due to the near-universal adherent properties of catechol groups. The zwitterionic and antifouling carboxybetaine (CB) groups of the Cu^II-PCBDA coating can significantly increase the wettability of CLs and reduce their protein adsorptions, resulting in a lens surface that is more water retentive and with lower protein binding to prevent tear film evaporation and eye dryness. In addition, since the immobilized copper ions in the MPNs impart them with ion-mediated antimicrobial activity, the Cu^II-PCBDA coating exhibits a strong and broad-spectrum antimicrobial activity against MK related pathogenic microbes, including bacteria, such as Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus, and fungi, such as Candida albicans. Compared with a pristine CL, the Cu^II-PCBDA-coated CL effectively inhibited biofilm formation even after daily exposure to the above microbial environment for 14 days. Notably, the Cu^II-PCBDA coating developed in this study is not only biocompatible with 100% cell viability following direct contact with human corneal epithelial cells (HCECs) for 48 h but also maintains the optical clarity of the native CLs. Thus, the Cu^II-PCBDA coating has a great application potential for the development of a multifunctional surface coating for CLs for increased CL comfort and prevention of MK.

Silicone hydrogel daily disposable benefits: The evidence

Daily disposable (DD) contact lenses first came to the market approximately 25 years ago and eye care professionals (ECPs) started prescribing silicone hydrogel (SiH) contact lenses, primarily for extended or continuous wear, approximately 20 years ago. It has now been over ten years since SiH DD contact lenses have been available, and while SiH materials are routinely prescribed by ECPs for reusable daily wear, hydrogel materials are still frequently selected for the DD modality of contact lens wear. This article reviews the evidence to support the benefits of both a DD modality and SiH materials and how patients' needs may be met with SiH DD contact lenses, with respect to clinical performance, health outcomes, satisfaction, compliance and convenience. Factors which may enable or constrain ECPs from prescribing SiH DD contact lenses, as opposed to hydrogel DD and reusable contact lenses, for more of their patients are discussed with the objective of providing ECPs with a greater understanding of the advantages that can be afforded by prescribing SiH DD contact lenses to both their new and existing contact lens wearers.