1
|
Ramamurthy K, Thomas NP, Gopi S, Sudhakaran G, Haridevamuthu B, Namasivayam KR, Arockiaraj J. Is Laccase derived from Pleurotus ostreatus effective in microplastic degradation? A critical review of current progress, challenges, and future prospects. Int J Biol Macromol 2024; 276:133971. [PMID: 39032890 DOI: 10.1016/j.ijbiomac.2024.133971] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2024] [Revised: 05/28/2024] [Accepted: 07/16/2024] [Indexed: 07/23/2024]
Abstract
Exploration of Pleurotus ostreatus as a biological agent in the degradation of persistent plastics like polyethylene, polystyrene, polyvinyl chloride, and polyethylene terephthalate, revealing a promising avenue toward mitigating the environmental impacts of plastic pollution. Leveraging the intrinsic enzymatic capabilities of this fungus, mainly its production of laccase, presents a sustainable and eco-friendly approach to breaking down complex polymer chains into less harmful constituents. This review focused on enhancements in the strain's efficiency through genetic engineering, optimized culture conditions, and enzyme immobilization to underscore the potential for scalability and practical application of this bioremediation process. The utilization of laccase from P. ostreatus in plastic waste management demonstrates a vital step forward in pursuing sustainable environmental solutions. By using the potential of fungal bioremediation, researchers can move closer to a future in which the adverse effects of plastic pollution are significantly mitigated, benefiting the health of our planet and future generations.
Collapse
Affiliation(s)
- Karthikeyan Ramamurthy
- Toxicology and Pharmacology Laboratory, Department of Biotechnology, SRM Institute of Science and Technology, Faculty of Science and Humanities, Kattankulatur 603203, Chengalpattu District, Tamil Nadu, India
| | - N Paul Thomas
- Department of Biochemistry, SRM Institute of Science and Technology, Faculty of Science and Humanities, Kattankulatur 603203, Chengalpattu District, Tamil Nadu, India
| | - Sanjay Gopi
- Toxicology and Pharmacology Laboratory, Department of Biotechnology, SRM Institute of Science and Technology, Faculty of Science and Humanities, Kattankulatur 603203, Chengalpattu District, Tamil Nadu, India
| | - Gokul Sudhakaran
- Center for Global Health Research, Saveetha Medical College and Hospital, Saveetha Instituite of Medical and Technical Sciences, Chennai, Tamil Nadu, India
| | - B Haridevamuthu
- Toxicology and Pharmacology Laboratory, Department of Biotechnology, SRM Institute of Science and Technology, Faculty of Science and Humanities, Kattankulatur 603203, Chengalpattu District, Tamil Nadu, India
| | - Karthick Raja Namasivayam
- Centre for Applied Research, Saveetha School of Engineering, Saveetha Instituite of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai 602105, Tamil Nadu, India.
| | - Jesu Arockiaraj
- Toxicology and Pharmacology Laboratory, Department of Biotechnology, SRM Institute of Science and Technology, Faculty of Science and Humanities, Kattankulatur 603203, Chengalpattu District, Tamil Nadu, India.
| |
Collapse
|
2
|
Yalameha B, Rezabakhsh A, Rahbarghazi R, Khaki-Khatibi F, Nourazarian A. Plastic particle impacts on the cardiovascular system and angiogenesis potential. Mol Cell Biochem 2024:10.1007/s11010-024-05081-2. [PMID: 39126457 DOI: 10.1007/s11010-024-05081-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2024] [Accepted: 07/25/2024] [Indexed: 08/12/2024]
Abstract
The extensive application of plastics in different sectors such as packaging, building, textiles, consumer products, and several industries has increased in recent years. Emerging data have confirmed that plastic wastes and segregates are problematic issues in aquatic and terrestrial ecosystems. The decomposition of plastic particles (PPs) leads to the release of microplastics (MPs) and nanoplastics (NPs) into the surrounding environment and entry of these particles will be problematic in unicellular and multicellular creatures. It was suggested that PPs can easily cross all biological barriers and reach different organs, especially the cardiovascular system, with the potential to modulate several molecular pathways. It is postulated that the direct interaction of PPs with cellular and subcellular components induces genotoxicity and cytotoxicity within the cardiovascular system. Meanwhile, being inert carriers, PPs can intensify the toxicity of other contaminants inside the cardiovascular system. Here, in this review article, several underlying mechanisms related to PP toxicity in the cardiovascular system were discussed in detail.
Collapse
Affiliation(s)
- Banafsheh Yalameha
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
- Department of Biochemistry and Clinical Laboratories, Faculty of Medicine, Tabriz University of Medical Sciences, Tabriz, 51666-14733, Iran
| | - Aysa Rezabakhsh
- Cardiovascular Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Reza Rahbarghazi
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran.
- Department of Applied Cell Sciences, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, 51666-14733, Iran.
| | - Fatemeh Khaki-Khatibi
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran.
- Department of Biochemistry and Clinical Laboratories, Faculty of Medicine, Tabriz University of Medical Sciences, Tabriz, 51666-14733, Iran.
| | - Alireza Nourazarian
- Department of Basic Medical Sciences, Khoy University of Medical Sciences, Khoy, Iran
| |
Collapse
|
3
|
Das N, Chowdhury GW, Siddique AB, Riya SC, Fazal MA, Sobhan F, Sarker S. The silent threat of plastics along the coastal frontiers of Bangladesh: Are we concerned enough? MARINE POLLUTION BULLETIN 2024; 205:116567. [PMID: 38875968 DOI: 10.1016/j.marpolbul.2024.116567] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/18/2024] [Revised: 06/01/2024] [Accepted: 06/03/2024] [Indexed: 06/16/2024]
Abstract
Globally plastic pollution is posing a significant threat to the health and integrity of coastal ecosystems. This study aimed to provide a comprehensive overview of plastic pollution in the coastal areas of Bangladesh by examining land-based macroplastic distribution, exploring microplastic (MP) contamination in the coastal aquatic ecosystem and enhancing our understanding of the potential risks associated with MP contamination. Citizen science based monitoring approach using the android application was applied to understand the land-based plastic pollution in the coastal area of Bangladesh. From December 2022 to December 2023, a total of about 3600 photographs of plastic items from 215 citizen scientists were received from the coastal area of Bangladesh covering 580 km long coast line. Polymer Hazard Index (PHI) and Pollution Load Index (PLI) were also calculated to understand the risk of plastic pollution in sediment, water, aquatic organism, dried fish and sea salt. A total of 43 land-based plastic items reported from the coastal area of Bangladesh. Among these plastic items single use items contributed 58.2 % while disposable plastic items contributed 41.8 %. A strong spatial variability in the distribution of these plastic items was observed. PHI and PLI values suggested hazard category-I for MP contamination in sediment, sea salt, water, commercial fishery resources and dry fish. This study highlighted that coastal land area, sea salt, dried fish, water, sediment and organisms are contaminated with plastics which might have the potential threats to human health. Findings from this study will serve as reference data and also baseline for future research to combat the plastic pollution.
Collapse
Affiliation(s)
- Nabanita Das
- Department of Oceanography, Shahjalal University of Science and Technology, Sylhet 3114, Bangladesh
| | | | - Abu Bokkar Siddique
- Department of Oceanography, Shahjalal University of Science and Technology, Sylhet 3114, Bangladesh
| | - Shashowti Chowdhury Riya
- Department of Oceanography, Shahjalal University of Science and Technology, Sylhet 3114, Bangladesh
| | - Md Azizul Fazal
- Department of Oceanography, Shahjalal University of Science and Technology, Sylhet 3114, Bangladesh
| | - Faisal Sobhan
- Department of Oceanography, Shahjalal University of Science and Technology, Sylhet 3114, Bangladesh
| | - Subrata Sarker
- Department of Oceanography, Shahjalal University of Science and Technology, Sylhet 3114, Bangladesh.
| |
Collapse
|
4
|
Safdar A, Ismail F, Safdar M, Imran M. Eco-friendly approaches for mitigating plastic pollution: advancements and implications for a greener future. Biodegradation 2024; 35:493-518. [PMID: 38310578 DOI: 10.1007/s10532-023-10062-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/14/2023] [Accepted: 12/13/2023] [Indexed: 02/06/2024]
Abstract
Plastic pollution has become a global problem since the extensive use of plastic in industries such as packaging, electronics, manufacturing and construction, healthcare, transportation, and others. This has resulted in an environmental burden that is continually growing, which has inspired many scientists as well as environmentalists to come up with creative solutions to deal with this problem. Numerous studies have been reviewed to determine practical, affordable, and environmentally friendly solutions to regulate plastic waste by leveraging microbes' innate abilities to naturally decompose polymers. Enzymatic breakdown of plastics has been proposed to serve this goal since the discovery of enzymes from microbial sources that truly interact with plastic in its naturalistic environment and because it is a much faster and more effective method than others. The scope of diverse microbes and associated enzymes in polymer breakdown is highlighted in the current review. The use of co-cultures or microbial consortium-based techniques for the improved breakdown of plastic products and the generation of high-value end products that may be utilized as prototypes of bioenergy sources is highlighted. The review also offers a thorough overview of the developments in the microbiological and enzymatic biological degradation of plastics, as well as several elements that impact this process for the survival of our planet.
Collapse
Affiliation(s)
- Ayesha Safdar
- Department of Biochemistry, The Islamia University of Bahawalpur, Bahawalpur, 63100, Punjab, Pakistan
- The Islamia University of Bahawalpur, Bahawalpur, 63100, Punjab, Pakistan
| | - Fatima Ismail
- Department of Biochemistry, The Islamia University of Bahawalpur, Bahawalpur, 63100, Punjab, Pakistan.
- The Islamia University of Bahawalpur, Bahawalpur, 63100, Punjab, Pakistan.
| | - Maryem Safdar
- University College of Conventional Medicine, The Islamia University of Bahawalpur, Bahawalpur, 63100, Punjab, Pakistan
- The Islamia University of Bahawalpur, Bahawalpur, 63100, Punjab, Pakistan
| | - Muhammad Imran
- Institute of Advanced Study, Shenzhen University, Shenzhen, 5180600, Guangdong Province, China.
| |
Collapse
|
5
|
Moharana T, Patnaik A, Mishra CSK, Behera BP, Samal RR. High-density polyethylene microplastics in agricultural soil: Impact on microbes, enzymes, and carbon-nitrogen ratio. JOURNAL OF ENVIRONMENTAL QUALITY 2024. [PMID: 39072844 DOI: 10.1002/jeq2.20610] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/17/2024] [Accepted: 06/25/2024] [Indexed: 07/30/2024]
Abstract
Microplastics (MPs), recognized as emerging pollutants, pose a significant threat to diverse organisms and have adverse effects on agricultural soil. High-density polyethylene (HDPE) holds a prominent position among prevalent forms of MPs. In the current investigations, the impact of HDPE was assessed at four different concentrations (0.25%, 0.5%, 0.75%, and 1.0%) on agricultural soil, microbial population, exoenzymes activities including amylase, cellulase, and invertase, and alteration in carbon-to-nitrogen (C/N) ratio. Both bacterial and fungal populations exhibited a non-concentration-dependent response to different concentrations of HDPE over time. In this study, we refer to the concentrations of 0.25%, 0.5%, 0.75%, and 1.0% as HT1, HT2, HT3, and HT4, respectively. Initial MP application significantly reduced bacterial colony counts for HT1, HT2, and HT4, while HT3 showed no significant change. On the 60th day, HT1 and HT3 exhibited a higher bacterial colony count compared to the control. On the other hand, fungal populations increased to maximum on day 1 but displayed no distinct time-dependent trend from days 15 to 60. Furthermore, enzyme activities decreased with increasing concentrations of MPs over an extended period. Molecular docking studies suggest that HDPE can hinder enzyme activity by forming hydrogen bonds with enzymes. The C/N ratio was found to be significantly higher in MP-treated soils on the 60th day relative to control, suggesting relatively slower degradation of carbon compounds in the MP-treated soils.
Collapse
Affiliation(s)
| | - Aliva Patnaik
- School of Life Sciences, Sambalpur University, Sambalpur, Odisha, India
| | - C S K Mishra
- Department of Zoology, College of Basic Science and Humanities, Odisha University of Agriculture and Technology, Bhubaneswar, Odisha, India
| | - Binayak Prasad Behera
- Department of Zoology, College of Basic Science and Humanities, Odisha University of Agriculture and Technology, Bhubaneswar, Odisha, India
| | - Rashmi Rekha Samal
- Environment and Sustainability Department, CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha, India
| |
Collapse
|
6
|
Panahi-Sarmad M, Alikarami N, Guo T, Haji M, Jiang F, Rojas OJ. Aerogels based on Bacterial Nanocellulose and their Applications. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2403583. [PMID: 39073312 DOI: 10.1002/smll.202403583] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/03/2024] [Revised: 07/01/2024] [Indexed: 07/30/2024]
Abstract
Microbial cellulose stands out for its exceptional characteristics in the form of biofilms formed by highly interlocked fibrils, namely, bacterial nanocellulose (BNC). Concurrently, bio-based aerogels are finding uses in innovative materials owing to their lightweight, high surface area, physical, mechanical, and thermal properties. In particular, bio-based aerogels based on BNC offer significant opportunities as alternatives to synthetic or mineral counterparts. BNC aerogels are proposed for diverse applications, ranging from sensors to medical devices, as well as thermal and electroactive systems. Due to the fibrous nanostructure of BNC and the micro-porosity of BNC aerogels, these materials enable the creation of tailored and specialized designs. Herein, a comprehensive review of BNC-based aerogels, their attributes, hierarchical, and multiscale features are provided. Their potential across various disciplines is highlighted, emphasizing their biocompatibility and suitability for physical and chemical modification. BNC aerogels are shown as feasible options to advance material science and foster sustainable solutions through biotechnology.
Collapse
Affiliation(s)
- Mahyar Panahi-Sarmad
- Department of Wood Science, The University of British Columbia, 2900-2424 Main Mall, Vancouver, BC, V6T 1Z4, Canada
- Bioproducts Institute, University of British Columbia, 2385 Agronomy Rd and East Mall, Vancouver, BC, V6T 1Z4, Canada
| | - Niloofar Alikarami
- Bioproducts Institute, University of British Columbia, 2385 Agronomy Rd and East Mall, Vancouver, BC, V6T 1Z4, Canada
| | - Tianyu Guo
- Bioproducts Institute, University of British Columbia, 2385 Agronomy Rd and East Mall, Vancouver, BC, V6T 1Z4, Canada
- Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, BC, V6T 1Z3, Canada
| | - Mehri Haji
- Bioproducts Institute, University of British Columbia, 2385 Agronomy Rd and East Mall, Vancouver, BC, V6T 1Z4, Canada
| | - Feng Jiang
- Department of Wood Science, The University of British Columbia, 2900-2424 Main Mall, Vancouver, BC, V6T 1Z4, Canada
- Bioproducts Institute, University of British Columbia, 2385 Agronomy Rd and East Mall, Vancouver, BC, V6T 1Z4, Canada
| | - Orlando J Rojas
- Department of Wood Science, The University of British Columbia, 2900-2424 Main Mall, Vancouver, BC, V6T 1Z4, Canada
- Bioproducts Institute, University of British Columbia, 2385 Agronomy Rd and East Mall, Vancouver, BC, V6T 1Z4, Canada
- Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, BC, V6T 1Z3, Canada
- Department of Chemistry, The University of British Columbia, 2036 Main Mall, Vancouver, BC, V6T 1Z1, Canada
| |
Collapse
|
7
|
Robazza A, Neumann A. Energy recovery from syngas and pyrolysis wastewaters with anaerobic mixed cultures. BIORESOUR BIOPROCESS 2024; 11:76. [PMID: 39066992 PMCID: PMC11283448 DOI: 10.1186/s40643-024-00791-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/26/2024] [Accepted: 07/15/2024] [Indexed: 07/30/2024] Open
Abstract
The anaerobic digestion of aqueous condensate from fast pyrolysis is a promising technology for enhancing carbon and energy recovery from waste. Syngas, another pyrolysis product, could be integrated as a co-substrate to improve process efficiency. However, limited knowledge exists on the co-fermentation of pyrolysis syngas and aqueous condensate by anaerobic cultures and the effects of substrate toxicity. This work investigates the ability of mesophilic and thermophilic anaerobic mixed cultures to co-ferment syngas and the aqueous condensate from either sewage sludge or polyethylene plastics pyrolysis in semi-batch bottle fermentations. It identifies inhibitory concentrations for carboxydotrophic and methanogenic reactions, examines specific component removal and assesses energy recovery potential. The results show successful co-fermentation of syngas and aqueous condensate components like phenols and N-heterocycles. However, the characteristics and load of the aqueous condensates affected process performance and product formation. The toxicity, likely resulting from the synergistic effect of multiple toxicants, depended on the PACs' composition. At 37 °C, concentrations of 15.6 gCOD/gVSS and 7.8 gCOD/gVSS of sewage sludge-derived aqueous condensate inhibited by 50% carboxydotrophic and methanogenic activity, respectively. At 55 °C, loads between 3.9 and 6.8 gCOD/gVSS inhibited by 50% both reactions. Polyethylene plastics condensate showed higher toxicity, with 2.8 gCOD/gVSS and 0.3 gCOD/gVSS at 37 °C decreasing carboxydotrophic and methanogenic rates by 50%. At 55 °C, 0.3 gCOD/gVSS inhibited by 50% CO uptake rates and methanogenesis. Increasing PAC loads reduced methane production and promoted short-chain carboxylates formation. The recalcitrant components in sewage sludge condensate hindered e-mol recovery, while plastics condensate showed high e-mol recoveries despite the stronger toxicity. Even with challenges posed by substrate toxicity and composition variations, the successful conversion of syngas and aqueous condensates highlights the potential of this technology in advancing carbon and energy recovery from anthropogenic waste streams.
Collapse
Affiliation(s)
- Alberto Robazza
- Institute of Process Engineering in Life Sciences 2: Electro Biotechnology, Karlsruhe Institute of Technology, KIT, 76131, Karlsruhe, Germany
| | - Anke Neumann
- Institute of Process Engineering in Life Sciences 2: Electro Biotechnology, Karlsruhe Institute of Technology, KIT, 76131, Karlsruhe, Germany.
| |
Collapse
|
8
|
Bastos BM, Silva PPD, Rocha SFD, Bertolo J, Arias JLDO, Michelon M, Pinto LADA. Preparation of films based on reticulated fish gelatin containing garlic essential oil. Food Res Int 2024; 188:114496. [PMID: 38823843 DOI: 10.1016/j.foodres.2024.114496] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2023] [Revised: 05/07/2024] [Accepted: 05/07/2024] [Indexed: 06/03/2024]
Abstract
Agro-industrial co-products, such as fish gelatin, stand out for their capacity in forming biopolymeric films, being biocompatible and non-toxic; however, its hydrophilicity poses a challenge. Essential oils, rich in bioactives, attract research interest aiming to enhance the protective barrier of films and enable their application in packaging. This study produced films based on cross-linked Nile tilapia skin gelatin, incorporating garlic essential oil. Gelatin obtained through partial collagen hydrolysis from the fish skin and cross-linked with gallic acid had hydroxyproline content of 10.02 g 100 g-1 and gel strength of 287 g, which were consistent with other studies. Oil extraction used supercritical CO2 as a solvent and ethanol as a cosolvent, following a factorial experimental design, evaluating the extraction temperature (40 °C and 70 °C) and cosolvent ratio (1:1 and 1:3), with three central points. Extraction was successful, with higher yields on a dry basis at 70 °C (88.35 %), using a 1:1 cosolvent ratio. Films incorporated with oil exhibited lower water vapor permeability (WVP) than those with only cross-linked gelatin (1.59 (g m-1 s-1 Pa-1) 1011). The film with the most suitable tensile strength (19.07 MPa), elongation (120.91 %), and WVP (1.09 (g m-1 s-1 Pa-1) 1011) properties contained garlic oil extracted at the central point (55 °C and 1:2). Thermal analysis indicated increased melting temperatures in films with added oil, suggesting low thermal degradation. These results suggest that garlic oil addition can improve the properties of fish gelatin-based films, making them promising for biodegradable packaging.
Collapse
Affiliation(s)
- Bruna Moura Bastos
- Industrial Technology Laboratory, School of Chemistry and Food, Federal University of Rio Grande - FURG, Itália Avenue, km 08, Carreiros, Rio Grande, RS, 96203-900, Brazil.
| | - Patrick Peres da Silva
- Industrial Technology Laboratory, School of Chemistry and Food, Federal University of Rio Grande - FURG, Itália Avenue, km 08, Carreiros, Rio Grande, RS, 96203-900, Brazil.
| | - Silvia Faria da Rocha
- Federal Institute of Paraná - IFPR, Dr. Tito Street, 801, Jardim Panorama, Jacarezinho, PR, 86400-000, Brazil.
| | - Jordano Bertolo
- Industrial Technology Laboratory, School of Chemistry and Food, Federal University of Rio Grande - FURG, Itália Avenue, km 08, Carreiros, Rio Grande, RS, 96203-900, Brazil.
| | - Jean Lucas de Oliveira Arias
- Industrial Technology Laboratory, School of Chemistry and Food, Federal University of Rio Grande - FURG, Itália Avenue, km 08, Carreiros, Rio Grande, RS, 96203-900, Brazil.
| | - Mariano Michelon
- Industrial Technology Laboratory, School of Chemistry and Food, Federal University of Rio Grande - FURG, Itália Avenue, km 08, Carreiros, Rio Grande, RS, 96203-900, Brazil.
| | - Luiz Antonio de Almeida Pinto
- Industrial Technology Laboratory, School of Chemistry and Food, Federal University of Rio Grande - FURG, Itália Avenue, km 08, Carreiros, Rio Grande, RS, 96203-900, Brazil.
| |
Collapse
|
9
|
Ahuja V, Singh PK, Mahata C, Jeon JM, Kumar G, Yang YH, Bhatia SK. A review on microbes mediated resource recovery and bioplastic (polyhydroxyalkanoates) production from wastewater. Microb Cell Fact 2024; 23:187. [PMID: 38951813 PMCID: PMC11218116 DOI: 10.1186/s12934-024-02430-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2024] [Accepted: 05/20/2024] [Indexed: 07/03/2024] Open
Abstract
BACKGROUND Plastic is widely utilized in packaging, frameworks, and as coverings material. Its overconsumption and slow degradation, pose threats to ecosystems due to its toxic effects. While polyhydroxyalkanoates (PHA) offer a sustainable alternative to petroleum-based plastics, their production costs present significant obstacles to global adoption. On the other side, a multitude of household and industrial activities generate substantial volumes of wastewater containing both organic and inorganic contaminants. This not only poses a threat to ecosystems but also presents opportunities to get benefits from the circular economy. Production of bioplastics may be improved by using the nutrients and minerals in wastewater as a feedstock for microbial fermentation. Strategies like feast-famine culture, mixed-consortia culture, and integrated processes have been developed for PHA production from highly polluted wastewater with high organic loads. Various process parameters like organic loading rate, organic content (volatile fatty acids), dissolved oxygen, operating pH, and temperature also have critical roles in PHA accumulation in microbial biomass. Research advances are also going on in downstream and recovery of PHA utilizing a combination of physical and chemical (halogenated solvents, surfactants, green solvents) methods. This review highlights recent developments in upcycling wastewater resources into PHA, encompassing various production strategies, downstream processing methodologies, and techno-economic analyses. SHORT CONCLUSION Organic carbon and nitrogen present in wastewater offer a promising, cost-effective source for producing bioplastic. Previous attempts have focused on enhancing productivity through optimizing culture systems and growth conditions. However, despite technological progress, significant challenges persist, such as low productivity, intricate downstream processing, scalability issues, and the properties of resulting PHA.
Collapse
Affiliation(s)
- Vishal Ahuja
- Department of Biotechnology, University Centre for Research & Development, Chandigarh University, Mohali, Punjab, 140413, India
| | - Pankaj Kumar Singh
- Department of Biotechnology, University Centre for Research & Development, Chandigarh University, Mohali, Punjab, 140413, India
| | - Chandan Mahata
- Department of Agricultural and Biological Engineering, University of Illinois at Urbana- Champaign, 1304 W. Pennsylvania Avenue, Urbana, 61801, USA
| | - Jong-Min Jeon
- Green & Sustainable Materials R&D Department, Research Institute of Clean Manufacturing System, Korea Institute of Industrial Technology (KITECH), Chungnam, 331-825, Republic of Korea
| | - Gopalakrishnan Kumar
- School of Civil and Environmental Engineering, Yonsei University, Seoul, 03722, Republic of Korea
- Institute of Chemistry, Bioscience and Environmental Engineering, Faculty of Science and Technology, University of Stavanger, Box 8600, Forus, Stavanger, 4036, Norway
| | - Yung-Hun Yang
- Department of Biological Engineering, College of Engineering, Konkuk University, Seoul, 05029, Republic of Korea
- Institute for Ubiquitous Information Technology and Application, Konkuk University, Seoul, 05029, Republic of Korea
| | - Shashi Kant Bhatia
- Department of Biological Engineering, College of Engineering, Konkuk University, Seoul, 05029, Republic of Korea.
- Institute for Ubiquitous Information Technology and Application, Konkuk University, Seoul, 05029, Republic of Korea.
| |
Collapse
|
10
|
Islam MZ. Prevention policies for the marine ecological environment in the South China Sea as a consequence of excessive plastic compound use in Vietnam. INTEGRATED ENVIRONMENTAL ASSESSMENT AND MANAGEMENT 2024. [PMID: 38923110 DOI: 10.1002/ieam.4971] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/03/2024] [Revised: 06/02/2024] [Accepted: 06/03/2024] [Indexed: 06/28/2024]
Abstract
Vietnam suffers from a distressing predicament: It ranks among the most heavily contaminated nations on earth. Its coastal and marine domains are plagued by an excess of plastic waste. Vietnam has consistently discharged a substantial amount of waste into the oceans, ranging from 0.28 to 0.73 million metric tons annually. Numerous areas have emerged as focal points of plastic pollution throughout its extensive seashore and marine areas. The escalating presence of marine litter poses an increasingly grave threat to the intricate equilibrium of Vietnam's marine ecosystems. This comprehensive policy study reveals that the mounting problem of ocean plastic pollution, characterized by the abundance of floating plastic debris, imperils both plant and animal life, placing various marine species such as seabirds, fish, turtles, and cetaceans at risk. The consumption of minuscule plastic particles and the harmful impact of chemical pollutants from plastic waste in the ocean not only endangers the vitality of marine life but also poses a substantial hazard to human well-being because plastic waste infiltrates the food chain. This research reveals that, despite the existence of numerous laws and policies-including the Law on Environmental Protection 2020, the Marine Plastic Waste Management Initiative for the Fisheries Sector 2020-2030, and the National Action Plan for Management of Marine Plastic Litter-a significant amount of plastic waste is infiltrating the river network and eventually infiltrating oceans as a result of improper monitoring and ineffective enforcement of these legislations. Relying primarily on existing data released by the government and other sources and a wide range of gray literature retrieved from reputable databases, this study aims to evaluate the role of Vietnam's legal framework for combating the critical issue of marine plastic pollution in the South China Sea. Integr Environ Assess Manag 2024;00:1-19. © 2024 SETAC.
Collapse
Affiliation(s)
- Md Ziaul Islam
- Research Institute of Environmental Law (RIEL), School of Law, Wuhan University, Wuhan, PR China
| |
Collapse
|
11
|
Khalid B, Alshawmar F. Comprehensive Review of Geotechnical Engineering Properties of Recycled Polyethylene Terephthalate Fibers and Strips for Soil Stabilization. Polymers (Basel) 2024; 16:1764. [PMID: 39000620 PMCID: PMC11244205 DOI: 10.3390/polym16131764] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/22/2024] [Revised: 06/14/2024] [Accepted: 06/14/2024] [Indexed: 07/17/2024] Open
Abstract
The waste management of plastic has become a pressing environmental issue, with polyethylene terephthalate (PET) being one of the major contributors. To address this challenge, the utilization of recycled PET fibers and strips in geotechnical engineering applications for soil stabilization has gained considerable attention. This review aims to provide a comprehensive study of the geotechnical engineering properties of recycled-PET-reinforced soils. The review examines various factors influencing the performance of PET-reinforced soils, including PET percent content, fiber length, and aspect ratio. It evaluates the mechanical properties, like shear strength, compressibility, bearing capacity, hydraulic behavior, and durability of recycled-PET-reinforced soils. The findings reveal PET reinforcement enhances shear strength, reduces settlement, and increases the bearing capacity and stability of the soil. However, it is observed that the incorporation of recycled PET fibers and strips does not lead to a significant impact on the dry density of the soil. Finally, an environmental and cost comparison analysis of recycled PET fibers and strips was conducted. This review serves as a valuable resource for researchers, engineers, and practitioners involved in the field, offering insights into the geotechnical properties of PET-reinforced soils and outlining future research directions to maximize their effectiveness and sustainability.
Collapse
Affiliation(s)
- Bisma Khalid
- Department of Transportation Engineering and Management, University of Engineering and Technology, Lahore 54890, Pakistan
| | - Fahad Alshawmar
- Department of Civil Engineering, College of Engineering, Qassim University, Buraydah 51452, Saudi Arabia
| |
Collapse
|
12
|
Yarahmadi A, Heidari S, Sepahvand P, Afkhami H, Kheradjoo H. Microplastics and environmental effects: investigating the effects of microplastics on aquatic habitats and their impact on human health. Front Public Health 2024; 12:1411389. [PMID: 38912266 PMCID: PMC11191580 DOI: 10.3389/fpubh.2024.1411389] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2024] [Accepted: 05/13/2024] [Indexed: 06/25/2024] Open
Abstract
Microplastics (MPs) are particles with a diameter of <5 mm. The disposal of plastic waste into the environment poses a significant and pressing issue concern globally. Growing worry has been expressed in recent years over the impact of MPs on both human health and the entire natural ecosystem. MPs impact the feeding and digestive capabilities of marine organisms, as well as hinder the development of plant roots and leaves. Numerous studies have shown that the majority of individuals consume substantial quantities of MPs either through their dietary intake or by inhaling them. MPs have been identified in various human biological samples, such as lungs, stool, placenta, sputum, breast milk, liver, and blood. MPs can cause various illnesses in humans, depending on how they enter the body. Healthy and sustainable ecosystems depend on the proper functioning of microbiota, however, MPs disrupt the balance of microbiota. Also, due to their high surface area compared to their volume and chemical characteristics, MPs act as pollutant absorbers in different environments. Multiple policies and initiatives exist at both the domestic and global levels to mitigate pollution caused by MPs. Various techniques are currently employed to remove MPs, such as biodegradation, filtration systems, incineration, landfill disposal, and recycling, among others. In this review, we will discuss the sources and types of MPs, the presence of MPs in different environments and food, the impact of MPs on human health and microbiota, mechanisms of pollutant adsorption on MPs, and the methods of removing MPs with algae and microbes.
Collapse
Affiliation(s)
- Aref Yarahmadi
- Department of Biology, Khorramabad Branch, Islamic Azad University, Khorramabad, Iran
| | | | - Parisa Sepahvand
- Department of Biology, Khorramabad Branch, Islamic Azad University, Khorramabad, Iran
| | - Hamed Afkhami
- Nervous System Stem Cells Research Center, Semnan University of Medical Sciences, Semnan, Iran
- Cellular and Molecular Research Center, Qom University of Medical Sciences, Qom, Iran
- Department of Medical Microbiology, Faculty of Medicine, Shahed University, Tehran, Iran
| | | |
Collapse
|
13
|
Serafin J, Dziejarski B. Activated carbons-preparation, characterization and their application in CO 2 capture: A review. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:40008-40062. [PMID: 37326723 DOI: 10.1007/s11356-023-28023-9] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/21/2023] [Accepted: 05/27/2023] [Indexed: 06/17/2023]
Abstract
In this paper, we provide a comprehensive review of the latest research trends in terms of the preparation, and characteristics of activated carbons regarding CO2 adsorption applications, with a special focus on future investigation paths. The reported current research trends are primarily closely related to the synthesis conditions (carbonization and physical or chemical activation process), to develop the microporosity and surface area, which are the most important factors affecting the effectiveness of adsorption. Furthermore, we emphasized the importance of regeneration techniques as a factor determining the actual technological and economic suitability of a given material for CO2 capture application. Consequently, this work provides a summary and potential directions for the development of activated carbons (AC). We attempt to create a thorough theoretical foundation for activated carbons while also focusing on identifying and specific statements of the most relevant ongoing research scope that might be advantageous to progress and pursue in the coming years.
Collapse
Affiliation(s)
- Jarosław Serafin
- Department of Inorganic and Organic Chemistry, University of Barcelona, Martí I Franquès, 1-11, 08028, Barcelona, Spain.
| | - Bartosz Dziejarski
- Faculty of Environmental Engineering, Wroclaw University of Science and Technology, 50-370, Wroclaw, Poland
- Department of Space, Earth and Environment, Division of Energy Technology, Chalmers University of Technology, 412 96, Gothenburg, Sweden
| |
Collapse
|
14
|
Abdelzaher MA, Farghali AA, Hamouda AS. Effective impact of nano-plastic-waste incorporated with nanotitina on the physical, mechanical and microstructural properties of white cement pastes composites for progressing towards sustainability. Sci Rep 2024; 14:12581. [PMID: 38822006 PMCID: PMC11143271 DOI: 10.1038/s41598-024-62661-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/16/2024] [Accepted: 05/20/2024] [Indexed: 06/02/2024] Open
Abstract
Plastic waste (PW) has received a lot of attention as a possible additional material for industrial and environmental applications, particularly cement and/or concrete production for a more environmentally and economically sound use of raw materials and energy sources. PW has been investigated as an inert and/or active hydraulic filler for cement and/or concrete by numerous scientists. Plastic garbage is cheap, abundant, and takes long period of time to degrade in the eco-system (soil and water). The main goal of the ongoing research is to offer safety and efficacy by partially substituting nano-plastic waste (NPW), incorporated with nano-titania (NT), for the composition of white cement (WC). Blends are built up by substitution of WC with different ratios of NPW incorporated with fixed ratios of nano-titania (1.0 wt.%). Workability, physical, mechanical and microstructural properties have gone through laboratory and instrumental analysis. The results showed improvement in the compressive strength, density and microstructure due to the effective impact of fillers. Consequently, a decrease in total porosity, whiteness reflection (Ry) and early-rapid expansion. Eventually, the outcomes may reduce the pandemic strength, especially in the external environment, and other epidemics.
Collapse
Affiliation(s)
- M A Abdelzaher
- Environmental Science and Industrial Development Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef, 62511, Egypt.
| | - Ahmed A Farghali
- Materials Science and Nanotechnology Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef, 62511, Egypt
| | - Asmaa S Hamouda
- Environmental Science and Industrial Development Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef, 62511, Egypt
| |
Collapse
|
15
|
Suchat S, Boonrasri S. Advancement of an Environmentally Friendly and Innovative Sustainable Rubber Wrap Film with Superior Sealing Properties. Polymers (Basel) 2024; 16:1499. [PMID: 38891446 PMCID: PMC11174811 DOI: 10.3390/polym16111499] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/20/2024] [Revised: 04/10/2024] [Accepted: 05/21/2024] [Indexed: 06/21/2024] Open
Abstract
Common kitchen wraps like plastic and aluminum foil create significant environmental burdens. Plastic wrap, typically made from non-renewable fossil fuels, often ends up in landfills for centuries, breaking down into harmful microplastics. Aluminum foil, while effective, requires a large amount of energy to produce, and recycling it at home can be impractical due to food residue. A promising new alternative, low-nitrosamine rubber wrap film, aims to reduce waste by offering a reusable option compared to traditional single-use plastic wrap. The film is environmentally friendly, durable, and effective in sealing containers and keeping food fresh or crispy. The raw materials used to make the product were studied, namely fresh and concentrated natural rubber latex. No nitrosamines were found in either the fresh or concentrated latex, which is important as nitrosamines are known to be carcinogenic. The absence of nitrosamines in the raw materials suggests that the universal rubber wrap film is safe for use. In this study, the rubber formulation and properties of rubber used to make rubber wrap film were studied. The content of additives affecting the rubber properties was varied to find the optimum rubber formulation for making rubber wrap films. The rubber formulation with the least amount of chemicals that met the following criteria was selected: tensile strength of at least 15 MPa, elongation at break of at least 600%, and nitrosamine content below 6 ppm. It was found experimentally that the optimum rubber formulation for making a translucent rubber film had 0.7 phr zinc oxide and 1.0 phr sulfur. Performance tests revealed the rubber wrap film's superior sealing capabilities. Its elasticity allows for a tighter fit on containers, effectively conforming to various shapes and creating an optimal seal compared to plastic wrap and aluminum foil. The results of this study provide valuable information for developing a universal rubber wrap film that is safe with low nitrosamines.
Collapse
Affiliation(s)
- Sunisa Suchat
- Faculty of Science and Industrial Technology, Prince of Songkla University Surat Thani Campus, Surat Thani 84000, Thailand
| | - Siwarote Boonrasri
- Faculty of Engineering and Agro-Industry, Maejo University, Chiang Mai 50290, Thailand
| |
Collapse
|
16
|
Chen W, Yin H, Cole I, Houshyar S, Wang L. Carbon Dots Derived from Non-Biomass Waste: Methods, Applications, and Future Perspectives. Molecules 2024; 29:2441. [PMID: 38893317 PMCID: PMC11174087 DOI: 10.3390/molecules29112441] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/11/2024] [Revised: 05/17/2024] [Accepted: 05/20/2024] [Indexed: 06/21/2024] Open
Abstract
Carbon dots (CDs) are luminescent carbon nanoparticles with significant potential in analytical sensing, biomedicine, and energy regeneration due to their remarkable optical, physical, biological, and catalytic properties. In light of the enduring ecological impact of non-biomass waste that persists in the environment, efforts have been made toward converting non-biomass waste, such as ash, waste plastics, textiles, and papers into CDs. This review introduces non-biomass waste carbon sources and classifies them in accordance with the 2022 Australian National Waste Report. The synthesis approaches, including pre-treatment methods, and the properties of the CDs derived from non-biomass waste are comprehensively discussed. Subsequently, we summarize the diverse applications of CDs from non-biomass waste in sensing, information encryption, LEDs, solar cells, and plant growth promotion. In the final section, we delve into the future challenges and perspectives of CDs derived from non-biomass waste, shedding light on the exciting possibilities in this emerging area of research.
Collapse
Affiliation(s)
- Wenjing Chen
- School of Fashion and Textiles, RMIT University, Brunswick, VIC 3056, Australia; (W.C.); (L.W.)
| | - Hong Yin
- School of Engineering, STEM College, RMIT University, Melbourne, VIC 3000, Australia; (I.C.); (S.H.)
| | - Ivan Cole
- School of Engineering, STEM College, RMIT University, Melbourne, VIC 3000, Australia; (I.C.); (S.H.)
| | - Shadi Houshyar
- School of Engineering, STEM College, RMIT University, Melbourne, VIC 3000, Australia; (I.C.); (S.H.)
| | - Lijing Wang
- School of Fashion and Textiles, RMIT University, Brunswick, VIC 3056, Australia; (W.C.); (L.W.)
| |
Collapse
|
17
|
Rafizul IM, Kraft E, Haupt T, Rafew SM. Forecasting municipal solid plastic waste generation and management policy using system dynamics: a case study of Khulna City in Bangladesh. ENVIRONMENTAL MONITORING AND ASSESSMENT 2024; 196:544. [PMID: 38740657 DOI: 10.1007/s10661-024-12684-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2023] [Accepted: 04/30/2024] [Indexed: 05/16/2024]
Abstract
A comprehensive analysis of municipal solid plastic waste (MSPW) management while emphasizing plastic pollution severity in coastal cities around the world is mandatory to alleviate the augmenting plastic waste footprint in nature. Thus, decision-makers' persuasion for numerous management solutions of MSPW flow-control can be met through meditative systematic strategies at the regional level. To forecast solutions focused on systematic policies, an agent-based system dynamics (ASD) model has been developed and simulated from 2023 to 2040 while considering significant knit parameters for MSPW management of Khulna City in Bangladesh. Baseline simulation results show that per-capita plastic waste generation will increase to 11.6 kg by 2040 from 8.92 kg in 2023. Eventually, the landfilled quantity of plastic waste has accumulated to 70,000 tons within 18 years. Moreover, the riverine discharge has increased to 834 tons in 2040 from a baseline quantity of 512 tons in 2023. So the plastic waste footprint index (PWFI) value rises to 24 by 2040. Furthermore, the absence of technological initiatives is responsible for the logarithmic rise of non-recyclable plastic waste to 1.35*1000=1350 tons. Finally, two consecutive policy scenarios with baseline factors such as controlled riverine discharge, increased collection and separation of plastic waste, expansion of recycle business, and locally achievable plastic conversion technologies have been simulated. Therefore, policy 2, with 69% conversion, 80% source separation, and 50% riverine discharge reduction of MSPW, has been found adequate from a sustainability perspective with the lowest PWFI ranges of 3.97 to 1.07 alongside a per-capita MSPW generation of 7.63 to 10 kg from 2023 till 2040.
Collapse
Affiliation(s)
- Islam M Rafizul
- Department of Civil Engineering, Khulna University of Engineering and Technology, Khulna-9203, Bangladesh
| | - Eckhard Kraft
- Biotechnology in Resources Management, Faculty of Civil Engineering, Bauhaus-Universität Weimar, Coudraystr. 7, 99423, Weimar, Germany
| | - Thomas Haupt
- Biotechnology in Resources Management, Faculty of Civil Engineering, Bauhaus-Universität Weimar, Coudraystr. 7, 99423, Weimar, Germany
| | - S M Rafew
- Department of Civil Engineering, Khulna University of Engineering and Technology, Khulna-9203, Bangladesh.
| |
Collapse
|
18
|
Taudul B, Tielens F, Calatayud M. Raman Characterization of Plastics: A DFT Study of Polystyrene. J Phys Chem B 2024; 128:4243-4254. [PMID: 38632700 DOI: 10.1021/acs.jpcb.3c08453] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/19/2024]
Abstract
Plastic materials are ubiquitous and raise concerns about their impact on health and the environment. To address these concerns, it is crucial to characterize the structural, size, and textural properties of plastics throughout their lifecycle from production to degradation. Raman spectroscopy appears as a valuable tool for this purpose, offering speed, robustness, and sensitivity to nanoscale and amorphous particles. In order to be properly used for plastics, the Raman response of reference materials needs to be carefully assessed, with the literature on such assessments being scarce. This study addresses this gap by using theoretical calculations to generate ab initio spectra for polystyrene, a reference material. The aim is to explain the origins of the spectral peaks and their consistency across various compositions and structures using linear ordered polymeric and finite amorphous models. The CRYSTAL package is employed to obtain full Raman spectra based on a careful benchmark of computational settings. While some peaks are present across all spectra and can serve for calibration, others exhibit structure-dependent behavior, enabling polymer identification. We conclude that Raman spectroscopy is a well-suited technique for plastics characterization provided that a careful analysis of signal origin is conducted to fully interpret the spectra and deploy applications.
Collapse
Affiliation(s)
- Beata Taudul
- Sorbonne Université, CNRS, Laboratoire de Chimie Théorique, LCT, 4 Place Jussieu, F-75005 Paris, France
| | - Frederik Tielens
- Department of General Chemistry (ALGC)─Materials Modelling Group, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussel, Belgium
| | - Monica Calatayud
- Sorbonne Université, CNRS, Laboratoire de Chimie Théorique, LCT, 4 Place Jussieu, F-75005 Paris, France
| |
Collapse
|
19
|
Kim J, Lee S. Microplastic contamination in urban aquatic environments: Occurrence characteristics in urban streams and stormwater runoff from urban surfaces. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 359:121050. [PMID: 38718605 DOI: 10.1016/j.jenvman.2024.121050] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/24/2024] [Revised: 04/08/2024] [Accepted: 04/28/2024] [Indexed: 05/22/2024]
Abstract
This study investigates microplastics in urban environments, focusing on their abundance, types, and relationships with hydrological parameters. Microplastic analyses encompassed two steps: (1) examining urban streams including discharges from a wastewater treatment plant (WWTP) during non-rainy seasons, and (2) analyzing stormwater runoff from urban surfaces for microplastic content during rainy seasons. In urban streams, WWTP discharge exhibited higher microplastic concentrations compared to other streams, indicating WWTP discharge is a dominant source of microplastic pollution. The most prevalent microplastics detected were polypropylene, polyethylene, and their copolymer, although a variety of other types were also found. Concentrations of microplastics were notably influenced by specific urban land uses, as evidenced by a strong correlation (0.95) between microplastic concentrations and areas characterized by industrial and transportation activities. During rainy seasons, microplastics followed the pattern of stormwater runoff, but the highest concentrations, significantly exceeding those in urban streams, were observed before the peak runoff. These maximum concentrations and their timing of occurrence were linked to antecedent dry days, rain intensity, and runoff rate, showing significant statistical correlations. Regardless of their sizes, a diverse range of microplastic types was identified in these conditions, with no consistent pattern across different rain events. This highlights the complex nature of urban microplastic pollution. This study reveals that aquatic ecosystems are significantly affected by two primary factors: (1) the consistent contribution of microplastics from WWTP discharges, and (2) the short-term, but severe, impacts of microplastic pollution associated with stormwater runoff. Furthermore, it suggests the development of alternative strategies to mitigate microplastic pollution in aquatic ecosystems, informed by the findings on the characteristics of microplastics in urban environments. This research underscores the urgent need for integrated urban environmental management strategies, paving the way for future studies to further explore and address the multifaceted challenges posed by microplastic pollution in aquatic ecosystems.
Collapse
Affiliation(s)
- Jaeyoung Kim
- Department of Environmental Engineering, Chungnam National University, 99, Daehak-ro, Yuseong-gu, Daejeon, 34134, Republic of Korea.
| | - Seungmoon Lee
- Department of Environmental & IT Engineering, Chungnam National University, 99, Daehak-ro, Yuseong-gu, Daejeon, 34134, Republic of Korea
| |
Collapse
|
20
|
Baltacı NG, Baltacı MÖ, Görmez A, Örtücü S. Green alternatives to petroleum-based plastics: production of bioplastic from Pseudomonas neustonica strain NGB15 using waste carbon source. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:31149-31158. [PMID: 38625463 PMCID: PMC11096215 DOI: 10.1007/s11356-024-33309-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/06/2024] [Accepted: 04/10/2024] [Indexed: 04/17/2024]
Abstract
Polyhydroxyalkanoates have attracted great interest as a suitable alternative to petrochemical based plastics due to their outstanding properties such as biodegradability and biocompatibility. However, the biggest problem in the production of microbial polyhydroxyalkanoates is low cost-effectiveness. In this study, polyhydroxyalkanoate production was carried out using waste substrates with local isolates. Culture conditions were optimized to increase the polyhydroxyalkanoate production potential. The produced polyhydroxyalkanoate was characterized by FTIR analyses, and its metabolic pathway was determined by real-time PCR. According to the results, the best polyhydroxyalkanoate producer bacteria was characterized as Pseudomonas neustonica NGB15. The optimal culture conditions were detected as 30 g/L banana peel powder, 25 °C temperature, pH 8, and 4-day incubation time. Under the optimized conditions, 3.34 g/L PHA production was achieved. As a result of FTIR analyses, major peaks were obtained at 1723, 1277, 1261, 1097, 1054, and 993 cm-1. These peaks represent that the type of produced polyhydroxyalkanoate was poly-β-hydroxybutyrate. According to gene expression profile of NGB15, it was determined that Pseudomonas neustonica NGB15 produces PHA using the de novo fatty acid synthesis metabolic pathway. In conclusion, poly-β-hydroxybutyrate production by Pseudomonas neustonica NGB15 using a low-cost fermentation medium has been shown to be biotechnologically promising.
Collapse
Affiliation(s)
- Nurdan Gönül Baltacı
- Department of Molecular Biology and Genetics, Faculty of Science, Ataturk University, 25240, Erzurum, Turkey.
- Department of Molecular Biology and Genetics, Faculty of Science, Erzurum Technical University, Erzurum, Turkey.
| | - Mustafa Özkan Baltacı
- Department of Molecular Biology and Genetics, Faculty of Science, Ataturk University, 25240, Erzurum, Turkey
| | - Arzu Görmez
- Department of Biology, Faculty of Science, Dokuz Eylul University, 35390, Izmir, Turkey
| | - Serkan Örtücü
- Department of Molecular Biology and Genetics, Faculty of Science, Erzurum Technical University, Erzurum, Turkey
| |
Collapse
|
21
|
Azman DQ, Wan Daud WMA, Abdul Patah MF, Amir Z, Saw PA. Plastic waste management through liquefaction in hydrogen donating solvents: A review. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 359:120961. [PMID: 38696851 DOI: 10.1016/j.jenvman.2024.120961] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/11/2023] [Revised: 03/23/2024] [Accepted: 04/19/2024] [Indexed: 05/04/2024]
Abstract
Plastic pollution poses a significant environmental threat, particularly to marine ecosystems, as conventional plastics persist without degradation, accumulating plastic waste in landfills and natural environments. A promising alternative to address this issue involves the use of hydrogen donor solvents in plastic liquefaction, offering a dual benefit of waste reduction and the generation of valuable liquid products with diverse industrial applications. This review delves into plastic recycling methods with a specific focus on liquefaction using hydrogen donating solvents as an innovative approach to waste management. Liquefaction, conducted at moderate to high temperatures (280-450 °C) and pressures (7-30 MPa), yields high oil conversion using various solvents. This study examined the performance of hydrogen-donating solvents, including water, alcohols, decalin, and cyclohexane, in enhancing the oil yield while minimising the oxygen content. Supercritical water, recognised for its effective plastic degradation and chemical production capabilities, and alcohols, with their alkylating and hydrogen-donating properties, have emerged as key solvents in plastic liquefaction. The use of hydrogen donor solvents stabilizes the free radicals, enhancing the conversion of plastic waste into valuable products. In addition, this review addresses the economic efficiency of the liquefaction process.
Collapse
Affiliation(s)
- Dania Qarrina Azman
- Sustainable Process Engineering Centre (SPEC), Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.
| | - Wan Mohd Ashri Wan Daud
- Sustainable Process Engineering Centre (SPEC), Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.
| | - Muhamad Fazly Abdul Patah
- Sustainable Process Engineering Centre (SPEC), Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.
| | - Zulhelmi Amir
- Sustainable Process Engineering Centre (SPEC), Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.
| | - Poh Ai Saw
- Sustainable Process Engineering Centre (SPEC), Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.
| |
Collapse
|
22
|
Adamou P, Harkou E, Bumajdad A, De Jong X, Van Haute M, Constantinou A, Al-Salem SM. Effect of Polyethylene Pyrolysis Oil Hydrotreatment on the Pt/Al 2O 3 Catalyst: Experimental Characterization. ACS OMEGA 2024; 9:19057-19062. [PMID: 38708201 PMCID: PMC11064189 DOI: 10.1021/acsomega.3c09729] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/06/2023] [Revised: 03/29/2024] [Accepted: 04/02/2024] [Indexed: 05/07/2024]
Abstract
The dramatic increase in plastics production, coupled with a low recycling and recovery rate, has been a major challenge for sustainable practices and combating climate change. Hydrotreatment processing to upgrade fuel oils is a well-known process in the petroleum industry. In this work, we aim to investigate the catalyst properties before and after the hydrotreatment of pyrolysis oil derived from plastics, namely, linear low-density polyethylene, as no such report is available in the literature. Granular and powder forms of the Pt/Al2O3 catalyst were used in this study with characterization methods executed as such: transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and IR-RIS. XRD data show that the crystallinity of the catalyst support was unaffected by the hydrotreatment without any residues left, as the characteristic diffraction peaks were indicated for the crystalline phase of the support as 37.4, 39.8, 46.3, and 67.3°. In addition, the TGA experiments revealed that the carbon deposition on the spent catalyst was higher, as indicated by the higher weight loss (15.359%) compared to the fresh catalyst sample (11.43%). XPS analysis showed that the carbon deposition is more intense on the granular spent catalyst, as the intensity of the peaks is some 15 times greater than the peaks from the fresh catalyst. Also, compared to the observed peaks of the powder catalyst, less coke is formed. The band at 1624.05 cm-1 from the IR-RIS spectra was attributed to a shifted C=O band from the coke formation. The extension of these investigations using different catalysts to improve their characteristics and performance and to inhibit coke deposition will contribute to the incorporation of such processes in industry as well as the cost of fuels.
Collapse
Affiliation(s)
- Panayiota Adamou
- Department
of Chemical Engineering, Cyprus University
of Technology, 57 Corner of 6 Athinon and Anexartisias, 3036 Limassol, Cyprus
| | - Eleana Harkou
- Department
of Chemical Engineering, Cyprus University
of Technology, 57 Corner of 6 Athinon and Anexartisias, 3036 Limassol, Cyprus
| | - Ali Bumajdad
- Department
of Chemistry, Faculty of Science, Kuwait
University, P.O. Box 5969, 13060 Safat, Kuwait
| | - Xander De Jong
- Q8 Research, Kuwait Petroleum Research
and Technology B.V., Moezelweg 251, 3198 LS Europoort Rotterdam, Netherlands
| | - Maarten Van Haute
- Q8 Research, Kuwait Petroleum Research
and Technology B.V., Moezelweg 251, 3198 LS Europoort Rotterdam, Netherlands
| | - Achilleas Constantinou
- Department
of Chemical Engineering, Cyprus University
of Technology, 57 Corner of 6 Athinon and Anexartisias, 3036 Limassol, Cyprus
| | - Sultan Majed Al-Salem
- Environment
& Life Sciences Research Centre, Kuwait
Institute for Scientific Research (KISR), P.O. Box 24885, 13109 Safat, Kuwait
| |
Collapse
|
23
|
Kumar M, Bhujbal SK, Kohli K, Prajapati R, Sharma BK, Sawarkar AD, Abhishek K, Bolan S, Ghosh P, Kirkham MB, Padhye LP, Pandey A, Vithanage M, Bolan N. A review on value-addition to plastic waste towards achieving a circular economy. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 921:171106. [PMID: 38387564 DOI: 10.1016/j.scitotenv.2024.171106] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/28/2023] [Revised: 02/12/2024] [Accepted: 02/18/2024] [Indexed: 02/24/2024]
Abstract
Plastic and mixed plastic waste (PW) has received increased worldwide attention owing to its huge rate of production, high persistency in the environment, and unsustainable waste management practices. Therefore, sustainable PW management and upcycling approaches are imperative to achieve the objectives of the United Nations Sustainable Development Goals. Numerous recent studies have shown the application and feasibility of various PW conversion techniques to produce materials with better economic value. Within this framework, the current review provides an in-depth analysis of cutting-edge thermochemical technologies such as pyrolysis, gasification, carbonization, and photocatalysis that can be used to value plastic and mixed PW in order to produce energy and industrial chemicals. Additionally, a thorough examination of the environmental impacts of contemporary PW upcycling techniques and their commercial feasibility through life cycle assessment (LCA) and techno-economical assessment are provided in this review. Finally, this review emphasizes the opportunities and challenges accompanying with existing PW upcycling techniques and deliver recommendations for future research works.
Collapse
Affiliation(s)
- Manish Kumar
- Amity Institute of Environmental Sciences, Amity University, Noida, India.
| | - Sachin Krushna Bhujbal
- Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi 110016, India
| | - Kirtika Kohli
- Distillate and Heavy Oil Processing Division, CSIR-Indian Institute of Petroleum, Dehradun 248005, India
| | - Ravindra Prajapati
- Prairie Research Institute-Illinois Sustainable Technology Center, University of Illinois Urbana-Champaign, Champaign, IL 61820, USA
| | - Brajendra K Sharma
- Prairie Research Institute-Illinois Sustainable Technology Center, University of Illinois Urbana-Champaign, Champaign, IL 61820, USA; United States Department of Agriculture, Agricultural Research Service Eastern Regional Research Center Sustainable Biofuels and Co-Products Research Unit, 600 E. Mermaid Ln., Wyndmoor, PA 19038, USA
| | - Ankush D Sawarkar
- Department of Information Technology, Shri Guru Gobind Singhji Institute of Engineering and Technology (SGGSIET), Nanded, Maharashtra 431 606, India
| | - Kumar Abhishek
- Department of Environment, Forest and Climate Change, Government of Bihar, Patna, India
| | - Shiv Bolan
- UWA School of Agriculture and Environment, The University of Western Australia, Perth, WA 6001, Australia; The UWA Institute of Agriculture, The University of Western Australia, Perth, WA 6001, Australia
| | - Pooja Ghosh
- Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi 110016, India; Department of Environmental and Biological Sciences, University of Eastern Finland, Kuopio 70211, Finland
| | - M B Kirkham
- Department of Agronomy, Kansas State University, Manhattan, KS, USA
| | - Lokesh P Padhye
- Department of Civil and Environmental Engineering, Faculty of Engineering, The University of Auckland, Auckland 1010, New Zealand
| | - Ashok Pandey
- Centre for Innovation and Translational Research, CSIR-Indian Institute of Toxicology Research, Lucknow 226 001, India; Kyung Hee University, Kyung Hee Dae Ro 26, Seoul 02447, Republic of Korea; Sustainability Cluster, School of Engineering, University of Petroleum and Energy Studies, Dehradun 248 007, Uttarakhand, India; Centre for Energy and Environmental Sustainability, Lucknow 226029, India
| | - Meththika Vithanage
- The UWA Institute of Agriculture, The University of Western Australia, Perth, WA 6001, Australia; Ecosphere Resilience Research Center, Faculty of Applied Sciences, University of Sri Jayewardenepura, Nugegoda 10250, Sri Lanka
| | - Nanthi Bolan
- UWA School of Agriculture and Environment, The University of Western Australia, Perth, WA 6001, Australia; The UWA Institute of Agriculture, The University of Western Australia, Perth, WA 6001, Australia.
| |
Collapse
|
24
|
Vidales-Barriguete A, Barreira E, Gomes Dias S. Assessment of the Thermal Properties of Gypsum Plaster with Plastic Waste Aggregates. MATERIALS (BASEL, SWITZERLAND) 2024; 17:1663. [PMID: 38612176 PMCID: PMC11012318 DOI: 10.3390/ma17071663] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/19/2024] [Revised: 03/28/2024] [Accepted: 04/03/2024] [Indexed: 04/14/2024]
Abstract
Building material manufacturers must support new production models that encourage the manufacture of more efficient and sustainable products. This includes thinking about savings in the use of raw materials, a contribution to the energy efficiency of buildings during their useful life, and a reduction in the generation and deposit of waste in landfills. In this research, an analysis of the thermal properties of gypsum composites added with plastic waste is carried out using the most common methods, the steady state method and the transient plane source method, and the effect of water saturation on these composites is tested. The results show an improvement in the thermal performance of the composites (values reduced with respect to the reference by 4-7%), despite their heterogeneity, as well as a variation in the measurements carried out, depending on the method used for the measurements (variation up to 10%). It is also found that the degree of humidity negatively affects the thermal conductivity coefficient but, on the contrary, this coefficient is not altered in the composites with plastic waste, due to their lower hygroscopicity. Therefore, it is considered that the proposed eco-plasters are a good alternative to traditional plasters, with which to contribute to the achievement of the objectives of the current European directives on waste and circular economy.
Collapse
Affiliation(s)
- Alejandra Vidales-Barriguete
- Departamento de Tecnología de la Edificación, Escuela Técnica Superior de Edificación, Universidad Politécnica de Madrid, Avenida Juan de Herrera, 6, 28040 Madrid, Spain;
| | - Eva Barreira
- CONSTRUCT-LFC, Civil Engineering Department, Faculty of Engineering (FEUP), University of Porto, 4200-465 Porto, Portugal;
| | - Susana Gomes Dias
- CONSTRUCT-LFC, Civil Engineering Department, Faculty of Engineering (FEUP), University of Porto, 4200-465 Porto, Portugal;
| |
Collapse
|
25
|
Manjunathan J, Pavithra K, Nangan S, Prakash S, Saxena KK, Sharma K, Muzammil K, Verma D, Gnanapragasam JR, Ramasubburayan R, Revathi M. Polyethylene terephthalate waste derived nanomaterials (WDNMs) and its utilization in electrochemical devices. CHEMOSPHERE 2024; 353:141541. [PMID: 38423149 DOI: 10.1016/j.chemosphere.2024.141541] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/16/2023] [Revised: 01/01/2024] [Accepted: 02/23/2024] [Indexed: 03/02/2024]
Abstract
Plastics are a vital component of our daily lives in the contemporary globalization period; they are present in all facets of modern life. Because the bulk of synthetic plastics utilized in the market are non-biodegradable by nature, the issues associated with their contamination are unavoidable in an era dominated by polymers. Polyethylene terephthalate (PET), which is extensively used in industries such as automotive, packaging, textile, food, and beverages production represents a major share of these non-biodegradable polymer productions. Given its extensive application across various sectors, PET usage results in a considerable amount of post-consumer waste, majority of which require disposal after a certain period. However, the recycling of polymeric waste materials has emerged as a prominent topic in research, driven by growing environmental consciousness. Numerous studies indicate that products derived from polymeric waste can be converted into a new polymeric resource in diverse sectors, including organic coatings and regenerative medicine. This review aims to consolidate significant scientific literatures on the recycling PET waste for electrochemical device applications. It also highlights the current challenges in scaling up these processes for industrial application.
Collapse
Affiliation(s)
- J Manjunathan
- Department of Biotechnology, Vels Institute of Science Technology and Advanced Studies, Pallavaram, Chennai, 600117, India
| | - K Pavithra
- Department of Chemistry, School of Basic Sciences, Vels Institute of Science Technology and Advanced Studies, Pallavaram, Chennai, 600 117, Tamilnadu, India
| | - Senthilkumar Nangan
- Department of Chemistry, Graphic Era Deemed to be University, Dehradun, Uttarkhand, India; Chitkara Centre for Research and Development, Chitkara University, Himachal Pradesh, 174103, India
| | - S Prakash
- Department of Basic Sciences, Institute of Fisheries Post Graduate Studies, Tamilnadu Dr. J. Jayalalithaa Fisheries University, OMR Campus, Chennai, Tamilnadu, India
| | - Kuldeep K Saxena
- Division of Research and Development, Lovely Professional University, Phagwara, Punjab, India
| | - Kuldeep Sharma
- Centre for Research Impact and Outcomes, Chitkara University, Rajpura, Punjab, India
| | - Khursheed Muzammil
- Department of Public Health, College of Applied Medical Sciences, Khamis Mushait Campus, King Khalid University, Abha, 62561, Saudi Arabia
| | - Deepak Verma
- Department of Mechanical Engineering, Graphic Era Hill University, Dehradun, Uttarkhand, India
| | | | - R Ramasubburayan
- Centre for Marine Research and Conservation, Department of Prosthodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai, 600 077, Tamilnadu, India.
| | - M Revathi
- Department of Chemistry, School of Basic Sciences, Vels Institute of Science Technology and Advanced Studies, Pallavaram, Chennai, 600 117, Tamilnadu, India.
| |
Collapse
|
26
|
Tan H, Othman MHD, Chong WT, Kek HY, Wong SL, Nyakuma BB, Mong GR, Wahab RA, Wong KY. Turning plastics/microplastics into valuable resources? Current and potential research for future applications. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 356:120644. [PMID: 38522274 DOI: 10.1016/j.jenvman.2024.120644] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Revised: 01/26/2024] [Accepted: 03/10/2024] [Indexed: 03/26/2024]
Abstract
Plastics are a wide range of synthetic or semi-synthetic materials, mainly consisting of polymers. The use of plastics has increased to over 300 million metric tonnes in recent years, and by 2050, it is expected to grow to 800 million. Presently, a mere 10% of plastic waste is recycled, with approximately 75% ended up in landfills. Inappropriate disposal of plastic waste into the environment poses a threat to human lives and marine species. Therefore, this review article highlights potential routes for converting plastic/microplastic waste into valuable resources to promote a greener and more sustainable environment. The literature review revealed that plastics/microplastics (P/MP) could be recycled or upcycled into various products or materials via several innovative processes. For example, P/MP are recycled and utilized as anodes in lithium-ion (Li-ion) and sodium-ion (Na-ion) batteries. The anode in Na-ion batteries comprising PP carbon powder exhibits a high reversible capacity of ∼340 mAh/g at 0.01 A/g current state. In contrast, integrating Fe3O4 and PE into a Li-ion battery yielded an excellent capacity of 1123 mAh/g at 0.5 A/g current state. Additionally, recycled Nylon displayed high physical and mechanical properties necessary for excellent application as 3D printing material. Induction heating is considered a revolutionary pyrolysis technique with improved yield, efficiency, and lower energy utilization. Overall, P/MPs are highlighted as abundant resources for the sustainable production of valuable products and materials such as batteries, nanomaterials, graphene, and membranes for future applications.
Collapse
Affiliation(s)
- Huiyi Tan
- Faculty of Chemical and Energy Engineering, University Teknologi Malaysia, 81310, Skudai, Johor, Malaysia
| | - Mohd Hafiz Dzarfan Othman
- Advanced Membrane Technology Research Centre (AMTEC), Universiti Teknlogi Malaysia, 81310, Skudai, Johor, Malaysia
| | - Wen Tong Chong
- Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - Hong Yee Kek
- Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310, Skudai, Johor, Malaysia
| | - Syie Luing Wong
- Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, Eindhoven, the Netherlands
| | - Bemgba Bevan Nyakuma
- Department of Chemical Sciences, Faculty of Science and Computing, Pen Resource University, P. M. B. 08, Gombe, Gombe State, Nigeria
| | - Guo Ren Mong
- School of Energy and Chemical Engineering, Xiamen University Malaysia, 43900, Sepang, Selangor, Malaysia
| | | | - Keng Yinn Wong
- Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310, Skudai, Johor, Malaysia; Process Systems Engineering Centre (PROSPECT), Universiti Teknologi Malaysia, 81310, Skudai, Johor, Malaysia.
| |
Collapse
|
27
|
Zhang Y, Cao Y, Chen B, Dong G, Zhao Y, Zhang B. Marine biodegradation of plastic films by Alcanivorax under various ambient temperatures: Bacterial enrichment, morphology alteration, and release of degradation products. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 917:170527. [PMID: 38286285 DOI: 10.1016/j.scitotenv.2024.170527] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/11/2023] [Revised: 01/25/2024] [Accepted: 01/26/2024] [Indexed: 01/31/2024]
Abstract
The global ocean has been receiving massive amounts of plastic wastes. Marine biodegradation, influenced by global climate, naturally breaks down these wastes. In this study, we systematically compared the biodegradation performance of petroleum- and bio-based plastic films, i.e., low-density polyethylene (LDPE), polylactic acid (PLA), and polyhydroxyalkanoates (PHAs) under three ambient temperatures (4, 15, and 22 °C). We deployed the our previously isolated cold-tolerant plastic-degrading Alcanivorax to simulate the accelerated marine biodegradation process and evaluated the alteration of bacterial growth, plastic films, and released degradation products. Notably, we found that marine biodegradation of PHA films enriched more bacterial amounts, induced more conspicuous morphological damage, and released more microplastics (MPs) and dissolved organic carbon (DOC) under all temperatures compared to LDPE and PLA. Particularly, MPs were released from film edges and cracks with a mean size of 2.8 μm under all temperatures. In addition, the degradation products released by biodegradation of PHA under 22 °C induced the highest acute toxicity to Vibrio fischeri. Our results highlighted that: (1) marine biodegradation of plastics would release millions of MPs per cm2 exposed surface area even in cold environments within 60 days; (2) different marine biodegradation scenarios of these plastics may raise disparate impacts and mitigation-related studies.
Collapse
Affiliation(s)
- Yuanmei Zhang
- Northern Region Persistent Organic Pollution Control (NRPOP) Laboratory, Faculty of Engineering and Applied Science, Memorial University, St. John's, NL A1B 3X5, Canada
| | - Yiqi Cao
- Northern Region Persistent Organic Pollution Control (NRPOP) Laboratory, Faculty of Engineering and Applied Science, Memorial University, St. John's, NL A1B 3X5, Canada.
| | - Bing Chen
- Northern Region Persistent Organic Pollution Control (NRPOP) Laboratory, Faculty of Engineering and Applied Science, Memorial University, St. John's, NL A1B 3X5, Canada
| | - Guihua Dong
- Northern Region Persistent Organic Pollution Control (NRPOP) Laboratory, Faculty of Engineering and Applied Science, Memorial University, St. John's, NL A1B 3X5, Canada
| | - Yuanyuan Zhao
- MOE Key Laboratory of Resources and Environmental Systems Optimization, North China Electric Power University, Beijing 102206, China
| | - Baiyu Zhang
- Northern Region Persistent Organic Pollution Control (NRPOP) Laboratory, Faculty of Engineering and Applied Science, Memorial University, St. John's, NL A1B 3X5, Canada.
| |
Collapse
|
28
|
Ahn S, Kim N, Choi Y, Kim J, Hwang H, Kim C, Lee HY, Kim S, Kim JS, Lee HH, Choi J. Peptide-Decorated Microneedles for the Detection of Microplastics. BIOSENSORS 2024; 14:140. [PMID: 38534247 DOI: 10.3390/bios14030140] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/05/2024] [Revised: 03/03/2024] [Accepted: 03/09/2024] [Indexed: 03/28/2024]
Abstract
The escalating utilization of plastics in daily life has resulted in pervasive environmental pollution and consequent health hazards. The challenge of detecting and capturing microplastics, which are imperceptible to the naked eye, is exacerbated by their diminutive size, hydrophobic surface properties, and capacity to absorb organic compounds. This study focuses on the application of peptides, constituted of specific amino acid sequences, and microneedles for the rapid and selective identification of microplastics. Peptides, due to their smaller size and greater environmental stability compared with antibodies, emerge as a potent solution to overcome the limitations inherent in existing detection methodologies. To immobilize peptides onto microneedles, this study employed microneedles embedded with gold nanorods, augmenting them with sulfhydryl (SH) groups at the peptides' termini. The sensor developed through this methodology exhibited efficient peptide binding to the microneedle tips, thereby facilitating the capture of microplastics. Raman spectroscopy was employed for the detection of microplastics, with the results demonstrating successful attachment to the microneedles. This novel approach not only facilitates localized analysis but also presents a viable strategy for the detection of microplastics across diverse environmental settings.
Collapse
Affiliation(s)
- Suyeon Ahn
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
| | - Namju Kim
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
| | - Yonghyun Choi
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
- Feynman Institute of Technology, Nanomedicine Corporation, Seoul 06974, Republic of Korea
| | - Jiwon Kim
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
| | - Hyeryun Hwang
- Department of Chemical Engineering, Myongji University, Yongin-si 17058, Republic of Korea
| | - Cholong Kim
- Department of Chemical Engineering, Myongji University, Yongin-si 17058, Republic of Korea
| | - Hee-Young Lee
- Department of Chemical Engineering, Kumoh National Institute of Technology, Gumi-si 39177, Republic of Korea
| | - Seungyoun Kim
- Division of Applied RI, Korea Institute of Radiological and Medical Sciences (KIRAMS), Seoul 01812, Republic of Korea
| | - Jin Su Kim
- Division of Applied RI, Korea Institute of Radiological and Medical Sciences (KIRAMS), Seoul 01812, Republic of Korea
| | - Hyun Ho Lee
- Department of Chemical Engineering, Myongji University, Yongin-si 17058, Republic of Korea
| | - Jonghoon Choi
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
- Feynman Institute of Technology, Nanomedicine Corporation, Seoul 06974, Republic of Korea
| |
Collapse
|
29
|
Taurozzi D, Cesarini G, Scalici M. Diatom and macroinvertebrate communities dynamic: A co-occurrence pattern analysis on plastic substrates. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 912:169071. [PMID: 38049005 DOI: 10.1016/j.scitotenv.2023.169071] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/12/2023] [Revised: 11/30/2023] [Accepted: 12/01/2023] [Indexed: 12/06/2023]
Abstract
Wetlands are habitats that provide numerous ecosystem services, but are often understudied and threatened by anthropogenic pollution, particularly plastic pollution. Macroplastics are a significant component of plastic litter that have high biological impacts but are often understudied. Previous studies have highlighted negative impacts on biota, but there is a lack of information about the communities of micro and macro organisms that settle on macroplastic litter. In this context, we investigated the colonization patterns and community structures of diatoms and macroinvertebrates on virgin substrates composed of two different plastic polymers, polystyrene and polyethylene terephthalate, located at two different depths in a protected wetland in Central Italy over a period of 10 months. The results show that diatom community is not highly structured by competitive forces and aggregation patterns emerges. In contrast, macroinvertebrate community appears to be randomly structured, without the presence of patterns following specific assembly rules. Randomness in macroinvertebrates assemblages could highlight the presence of different niches available for settlement of different taxa. Combined matrix analyses show that diatoms and macroinvertebrates co-occur, and their community assemblages are sometimes structured, while they appeared to be randomly assembled at other times. Whenever non-randomness of diatoms and macroinvertebrates co-occurrences was detected, it suggested aggregation. Moreover, the possible predatory relationship between different macroinvertebrates taxa should be investigated, as it could reveal important scenarios in the establishment of macroinvertebrate structured communities on plastic litter, including taxa that exploit different ecological niches. This could lead to an enrichment of the biological community within areas impacted by plastics.
Collapse
Affiliation(s)
- Davide Taurozzi
- Department of Sciences, University of Roma Tre, Viale G. Marconi 446, 00146 Rome, Italy
| | - Giulia Cesarini
- Department of Sciences, University of Roma Tre, Viale G. Marconi 446, 00146 Rome, Italy; National Research Council - Water Research Institute (CNR-IRSA), Corso Tonolli 50, 28922 Verbania, Italy.
| | - Massimiliano Scalici
- Department of Sciences, University of Roma Tre, Viale G. Marconi 446, 00146 Rome, Italy; National Biodiversity Future Center (NBFC), Università di Palermo, Piazza Marina 61, 90133 Palermo, Italy
| |
Collapse
|
30
|
Ganasen N, Krishnaraj L, Onyelowe KC, Stephen LU. Machine learning optimization of bio-sandcrete brick modelling using response surface methodology. Sci Rep 2024; 14:3438. [PMID: 38341508 DOI: 10.1038/s41598-024-54029-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2023] [Accepted: 02/07/2024] [Indexed: 02/12/2024] Open
Abstract
In this study, raw grinded groundnut shell (RGGNS) was used as a fine aggregate in the brick industry to reuse agricultural waste in building materials. In this study, an experimental approach was used to examine a new cement brick with raw groundnut shells integrated with compressive strength, water absorption and dry density optimization utilizing response surface methodology (RSM). The raw ground-nut shell content improved the fine aggregate performance of the 40%, 50%, and 60% samples. The 28-day high compressive strength with the raw ground-nut shell was 6.1 N/mm2 maximum, as needed by the technical standard. Samples made from 40%, 50%, and 60% raw groundnut shells yielded densities of 1.7, 2.2, and 1.9 kg/cm3 for groundnut shell (GNS) brick, respectively. A product's mechanical properties meet the IS code standard's minimum requirements. RSM was then utilized to develop a model for the addition of raw groundnut shell to concrete. R-square and Adeq precision values indicated that the results are highly significant, and equations for predicting compressive strength, water absorption, and dry density have been developed. In addition, optimization was performed on the RSM findings to determine the efficiency optimization of the model. Following the optimization results, experiments were conducted to determine the applicability of the optimized model.
Collapse
Affiliation(s)
- Nakkeeran Ganasen
- Department of Civil Engineering, SRM Institute of Science and Technology, Kattankulathur, Chengalpattu, Tamil Nadu, India, 603203
| | - L Krishnaraj
- Department of Civil Engineering, SRM Institute of Science and Technology, Kattankulathur, Chengalpattu, Tamil Nadu, India, 603203.
| | - Kennedy C Onyelowe
- Department of Civil Engineering, Michael Okpara University of Agriculture, Umudike, Nigeria.
- Department of Civil Engineering, University of Peloponnese, 26334, Patras, Greece.
- Department of Civil, School of Engineering and Applied Sciences, Kampala International University, Kampala, Uganda.
| | - Liberty U Stephen
- Department of Civil Engineering, University of Agriculture and Environmental Sciences, Umuagwo, Imo State, Nigeria
| |
Collapse
|
31
|
Naaz T, Kumari S, Sharma K, Singh V, Khan AA, Pandit S, Priya K, Jadhav DA. Bioremediation of hydrocarbon by co-culturing of biosurfactant-producing bacteria in microbial fuel cell with Fe 2O 3-modified anode. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 351:119768. [PMID: 38100858 DOI: 10.1016/j.jenvman.2023.119768] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2023] [Revised: 11/13/2023] [Accepted: 12/03/2023] [Indexed: 12/17/2023]
Abstract
The most common type of environmental contamination is petroleum hydrocarbons. Sustainable and environmentally friendly treatment strategies must be explored in light of the increasing challenges of toxic and critical wastewater contamination. This paper deals with the bacteria-producing biosurfactant and their employment in the bioremediation of hydrocarbon-containing waste through a microbial fuel cell (MFC) with Pseudomonas aeruginosa (exoelectrogen) as co-culture for simultaneous power generation. Staphylococcus aureus is isolated from hydrocarbon-contaminated soil and is effective in hydrocarbon degradation by utilizing hydrocarbon (engine oil) as the only carbon source. The biosurfactant was purified using silica-gel column chromatography and characterised through FTIR and GCMS, which showed its glycolipid nature. The isolated strains are later employed in the MFCs for the degradation of the hydrocarbon and power production simultaneously which has shown a power density of 6.4 W/m3 with a 93% engine oil degradation rate. A biogenic Fe2O3 nanoparticle (NP) was synthesized using Bambusa arundinacea shoot extract for anode modification. It increased the power output by 37% and gave the power density of 10.2 W/m3. Thus, simultaneous hydrocarbon bioremediation from oil-contamination and energy recovery can be achieved effectively in MFC with modified anode.
Collapse
Affiliation(s)
- Tahseena Naaz
- Department of Life Sciences, School of Basic Sciences and Research, Sharda University, Greater Noida, 201310, Uttar Pradesh, India
| | - Shilpa Kumari
- Department of Life Sciences, School of Basic Sciences and Research, Sharda University, Greater Noida, 201310, Uttar Pradesh, India
| | - Kalpana Sharma
- Department of Life Sciences, School of Basic Sciences and Research, Sharda University, Greater Noida, 201310, Uttar Pradesh, India
| | - Vandana Singh
- Department of Microbiology, School of Allied Health Sciences, Sharda University, Greater Noida, 201310, Uttar Pradesh, India
| | - Azmat Ali Khan
- Pharmaceutical Biotechnology Laboratory, Department of Pharmaceutical Chemistry, College of Pharmacy, King Saud University, Riyadh, 11451, Saudi Arabia
| | - Soumya Pandit
- Department of Life Sciences, School of Basic Sciences and Research, Sharda University, Greater Noida, 201310, Uttar Pradesh, India.
| | - Kanu Priya
- Department of Life Sciences, School of Basic Sciences and Research, Sharda University, Greater Noida, 201310, Uttar Pradesh, India.
| | - Dipak A Jadhav
- Department of Environmental Engineering, College of Ocean Science and Engineering, Korea Maritime and Ocean University, 727 Taejong-ro, Yeongdo-gu, Busan, 49112, Republic of Korea.
| |
Collapse
|
32
|
Azarnejad N, Celletti S, Ghorbani M, Fedeli R, Loppi S. Dose-Dependent Effects of a Corn Starch-Based Bioplastic on Basil ( Ocimum basilicum L.): Implications for Growth, Biochemical Parameters, and Nutrient Content. TOXICS 2024; 12:80. [PMID: 38251035 PMCID: PMC10818275 DOI: 10.3390/toxics12010080] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/26/2023] [Revised: 01/12/2024] [Accepted: 01/15/2024] [Indexed: 01/23/2024]
Abstract
Plastic pollution is a pressing global issue, prompting the exploration of sustainable alternatives such as bioplastics (BPs). In agriculture, BPs have gained relevance as mulching films. This study investigated the effect of the presence in the soil of different concentrations (0-3%, w/w) of a corn starch-based bioplastic on basil (Ocimum basilicum L.). The results showed that increasing bioplastic concentration reduced shoot fresh biomass production. Biochemical analyses revealed changes in the shoot in soluble protein content, biomarkers of oxidative and osmotic stress (malondialdehyde and proline, respectively), anti-radical activity, and antioxidant compounds (phenols, flavonoids, and ascorbic acid), which are indicative of plant adaptive mechanisms in response to stress caused by the presence of the different concentrations of bioplastic in the soil. Macro- and micronutrient analysis showed imbalances in nutrient uptake, with a decreased content of potassium, phosphorus, and manganese, and an increased content of magnesium, iron, and copper in the shoot at high BP concentrations.
Collapse
Affiliation(s)
- Nazanin Azarnejad
- Department of Life Sciences (DSV), University of Siena, 53100 Siena, Italy; (N.A.); (M.G.); (R.F.); (S.L.)
| | - Silvia Celletti
- Department of Life Sciences (DSV), University of Siena, 53100 Siena, Italy; (N.A.); (M.G.); (R.F.); (S.L.)
- BioAgry Lab, University of Siena, 53100 Siena, Italy
| | - Majid Ghorbani
- Department of Life Sciences (DSV), University of Siena, 53100 Siena, Italy; (N.A.); (M.G.); (R.F.); (S.L.)
| | - Riccardo Fedeli
- Department of Life Sciences (DSV), University of Siena, 53100 Siena, Italy; (N.A.); (M.G.); (R.F.); (S.L.)
- BioAgry Lab, University of Siena, 53100 Siena, Italy
| | - Stefano Loppi
- Department of Life Sciences (DSV), University of Siena, 53100 Siena, Italy; (N.A.); (M.G.); (R.F.); (S.L.)
- BioAgry Lab, University of Siena, 53100 Siena, Italy
- BAT Center—Interuniversity Center for Studies on Bioinspired Agro-Environmental Technology, University of Naples “Federico II”, 80138 Napoli, Italy
| |
Collapse
|
33
|
He Y, Deng X, Jiang L, Hao L, Shi Y, Lyu M, Zhang L, Wang S. Current advances, challenges and strategies for enhancing the biodegradation of plastic waste. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 906:167850. [PMID: 37844647 DOI: 10.1016/j.scitotenv.2023.167850] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/18/2023] [Revised: 10/13/2023] [Accepted: 10/13/2023] [Indexed: 10/18/2023]
Abstract
Due to its highly recalcitrant nature, the growing accumulation of plastic waste is becoming an urgent global problem. Biodegradation is one of the best possible approaches for the treatment of plastic waste in an environmentally friendly manner, but our current knowledge on the underlying mechanisms, as well as strategies for the development and enhancement of plastic biodegradation are still limited. This review aims to provide an updated and comprehensive overview of current research on plastic waste biodegradation, focusing on enhancement strategies with ongoing research significance, including the mining of highly efficient plastic-degrading microorganisms/enzymes, utilization of synergistic additives, novel pretreatment approaches, modification via molecular engineering, and construction of bacterial/enzyme consortia systems. Studying these strategies can (i) enrich the high-performance microbial/enzymes toolbox for plastic degradation, (ii) provide methods for recycling and upgrading plastics, as well as (iii) enable further molecular modification and functional optimization of plastic-degrading enzymes to realize economically viable biodegradation of plastics. To the best of our knowledge, this is the first review to discuss in detail strategies to enhance biodegradation of plastics. Finally, some recommendations for future research on plastic biodegradation are listed, hoping to provide the best direction for tackling the plastic waste dilemma in the future.
Collapse
Affiliation(s)
- Yuehui He
- Jiangsu Key Laboratory of Marine Bioresources and Environment/Jiangsu Key Laboratory of Marine, Biotechnology, Jiangsu Ocean University, Lianyungang 222005, China; Co-Innovation Center of Jiangsu Marine Bio-Industry Technology, Jiangsu Ocean University, Lianyungang 222005, China; College of Marine Food and Bioengineering, Jiangsu Ocean University, Lianyungang 222005, China
| | - Xilong Deng
- College of Marine Food and Bioengineering, Jiangsu Ocean University, Lianyungang 222005, China
| | - Lei Jiang
- College of Marine Food and Bioengineering, Jiangsu Ocean University, Lianyungang 222005, China
| | - Lijuan Hao
- College of Marine Food and Bioengineering, Jiangsu Ocean University, Lianyungang 222005, China
| | - Yong Shi
- College of Marine Food and Bioengineering, Jiangsu Ocean University, Lianyungang 222005, China
| | - Mingsheng Lyu
- Jiangsu Key Laboratory of Marine Bioresources and Environment/Jiangsu Key Laboratory of Marine, Biotechnology, Jiangsu Ocean University, Lianyungang 222005, China; Co-Innovation Center of Jiangsu Marine Bio-Industry Technology, Jiangsu Ocean University, Lianyungang 222005, China; College of Marine Food and Bioengineering, Jiangsu Ocean University, Lianyungang 222005, China
| | - Lei Zhang
- Jiangsu Key Laboratory of Marine Bioresources and Environment/Jiangsu Key Laboratory of Marine, Biotechnology, Jiangsu Ocean University, Lianyungang 222005, China; Co-Innovation Center of Jiangsu Marine Bio-Industry Technology, Jiangsu Ocean University, Lianyungang 222005, China; College of Marine Food and Bioengineering, Jiangsu Ocean University, Lianyungang 222005, China.
| | - Shujun Wang
- Jiangsu Key Laboratory of Marine Bioresources and Environment/Jiangsu Key Laboratory of Marine, Biotechnology, Jiangsu Ocean University, Lianyungang 222005, China; Co-Innovation Center of Jiangsu Marine Bio-Industry Technology, Jiangsu Ocean University, Lianyungang 222005, China; College of Marine Food and Bioengineering, Jiangsu Ocean University, Lianyungang 222005, China.
| |
Collapse
|
34
|
Thomas AP, Kasa VP, Dubey BK, Sen R, Sarmah AK. Synthesis and commercialization of bioplastics: Organic waste as a sustainable feedstock. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 904:167243. [PMID: 37741416 DOI: 10.1016/j.scitotenv.2023.167243] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/07/2023] [Revised: 09/14/2023] [Accepted: 09/19/2023] [Indexed: 09/25/2023]
Abstract
Substituting synthetic plastics with bioplastics, primarily due to their inherent biodegradable properties, represents a highly effective strategy to address the current global issue of plastic waste accumulation in the environment. Advances in bioplastic research have led to the development of materials with improved properties, enabling their use in a wide range of applications in major commercial sectors. Bioplastics are derived from various natural sources such as plants, animals, and microorganisms. Polyhydroxyalkanoate (PHA), a biopolymer synthesized by bacteria through microbial fermentation, exhibits physicochemical and mechanical characteristics comparable to those of synthetic plastics. In response to the growing demand for these environmentally friendly plastics, researchers are actively investigating various cleaner production methods, including modification or derivatization of existing molecules for enhanced properties and new-generation applications to expand their market share in the coming decades. By 2026, the commercial manufacturing capacity of bioplastics is projected to reach 7.6 million tonnes, with Europe currently holding a significant market share of 43.5 %. Bioplastics are predominantly utilized in the packaging industry, indicating a strong focus of their application in the sector. With the anticipated rise in bioplastic waste volume over the next few decades, it is crucial to comprehend their fate in various environments to evaluate the overall environmental impact. Ensuring their complete biodegradation involves optimizing waste management strategies and appropriate disposal within these facilities. Future research efforts should prioritize exploration of their end-of-life management and toxicity assessment of degradation products. These efforts are crucial to ensure the economic viability and environmental sustainability of bioplastics as alternatives to synthetic plastics.
Collapse
Affiliation(s)
- Anjaly P Thomas
- Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| | - Vara Prasad Kasa
- Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| | - Brajesh Kumar Dubey
- Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India.
| | - Ramkrishna Sen
- Department of Biotechnology, Indian Institute of Technology Kharagpur, West Bengal 721302, India
| | - Ajit K Sarmah
- Department of Civil & Environmental Engineering, Faculty of Engineering, The University of Auckland, Private Bag 92019, Auckland 1142, New Zealand; The Institute of Agriculture, The University of Western Australia, Nedlands, Perth, WA 6009, Australia
| |
Collapse
|
35
|
Hou Y, Zhu G, Catt SO, Yin Y, Xu J, Blasco E, Zhao N. Closed-Loop Recyclable Silica-Based Nanocomposites with Multifunctional Properties and Versatile Processability. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2304147. [PMID: 37844996 PMCID: PMC10724396 DOI: 10.1002/advs.202304147] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/22/2023] [Revised: 08/06/2023] [Indexed: 10/18/2023]
Abstract
Most plastics originate from limited petroleum reserves and cannot be effectively recycled at the end of their life cycle, making them a significant threat to the environment and human health. Closed-loop chemical recycling, by depolymerizing plastics into monomers that can be repolymerized, offers a promising solution for recycling otherwise wasted plastics. However, most current chemically recyclable polymers may only be prepared at the gram scale, and their depolymerization typically requires harsh conditions and high energy consumption. Herein, it reports less petroleum-dependent closed-loop recyclable silica-based nanocomposites that can be prepared on a large scale and have a fully reversible polymerization/depolymerization capability at room temperature, based on catalysis of free aminopropyl groups with the assistance of diethylamine or ethylenediamine. The nanocomposites show glass-like hardness yet plastic-like light weight and toughness, exhibiting the highest specific mechanical strength superior even to common materials such as poly(methyl methacrylate), glass, and ZrO2 ceramic, as well as demonstrating multifunctionality such as anti-fouling, low thermal conductivity, and flame retardancy. Meanwhile, these nanocomposites can be easily processed by various plastic-like scalable manufacturing methods, such as compression molding and 3D printing. These nanocomposites are expected to provide an alternative to petroleum-based plastics and contribute to a closed-loop materials economy.
Collapse
Affiliation(s)
- Yi Hou
- Beijing National Laboratory for Molecular SciencesLaboratory of Polymer Physics and ChemistryInstitute of ChemistryChinese Academy of SciencesBeijing100190P. R. China
- Institute for Molecular Systems Engineering and Advanced Materials (IMSEAM)Heidelberg University69120HeidelbergGermany
- Organic Chemistry Institute (OCI)Heidelberg University69120HeidelbergGermany
| | - Guangda Zhu
- Beijing National Laboratory for Molecular SciencesLaboratory of Polymer Physics and ChemistryInstitute of ChemistryChinese Academy of SciencesBeijing100190P. R. China
- Institute for Molecular Systems Engineering and Advanced Materials (IMSEAM)Heidelberg University69120HeidelbergGermany
- Organic Chemistry Institute (OCI)Heidelberg University69120HeidelbergGermany
| | - Samantha O. Catt
- Institute for Molecular Systems Engineering and Advanced Materials (IMSEAM)Heidelberg University69120HeidelbergGermany
- Organic Chemistry Institute (OCI)Heidelberg University69120HeidelbergGermany
| | - Yuhan Yin
- Beijing National Laboratory for Molecular SciencesLaboratory of Polymer Physics and ChemistryInstitute of ChemistryChinese Academy of SciencesBeijing100190P. R. China
| | - Jian Xu
- Beijing National Laboratory for Molecular SciencesLaboratory of Polymer Physics and ChemistryInstitute of ChemistryChinese Academy of SciencesBeijing100190P. R. China
| | - Eva Blasco
- Institute for Molecular Systems Engineering and Advanced Materials (IMSEAM)Heidelberg University69120HeidelbergGermany
- Organic Chemistry Institute (OCI)Heidelberg University69120HeidelbergGermany
| | - Ning Zhao
- Beijing National Laboratory for Molecular SciencesLaboratory of Polymer Physics and ChemistryInstitute of ChemistryChinese Academy of SciencesBeijing100190P. R. China
| |
Collapse
|
36
|
Khotsaeng N, Simchuer W, Imsombut T, Srihanam P. Effect of Glycerol Concentrations on the Characteristics of Cellulose Films from Cattail ( Typha angustifolia L.) Flowers. Polymers (Basel) 2023; 15:4535. [PMID: 38231905 PMCID: PMC10708089 DOI: 10.3390/polym15234535] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2023] [Revised: 11/16/2023] [Accepted: 11/22/2023] [Indexed: 01/19/2024] Open
Abstract
Plastic waste has become a big problem for the environment globally. Biodegradable polymers are a potential replacement for plastics that can have a positive outcome both environmentally and economically. In this work, we used acid hydrolysis and alkaline treatment to extract cellulose fibers from cattails. The obtained cellulose was used as a substrate for the fabrication of cellulose film using a casting technique on plastic plates. Different concentrations of the plasticizer, glycerol, were used to prepare films for comparison, and its effects on the film's characteristics were observed. The morphology, chemical structure, and thermal stability of the cattail cellulose (CTC) films were studied using techniques such as scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and thermogravimetric analysis (TGA), respectively. Measurements of transparency, moisture content (MC), water solubility (MS), and water contact angle (WCA) were also performed. Introducing glycerol into the films increased the transparency, MC, and WS values, as well as the gap width between film textures. However, it resulted in a decrease in the WCA of the films, showing that the hydrophilicity of the films is increased by the addition of glycerol. The interaction between the functional groups of cellulose and glycerol was established from the ATR-FTIR and XRD data. The obtained results indicated that glycerol affected the thermal stability and the degree of crystallinity of the produced films. Accordingly, the hydrophilicity of the cellulose film was increased by increasing the glycerol content; therefore, cattail cellulose films can be used as a biodegradable alternative to plastic in the future.
Collapse
Affiliation(s)
- Nuanchai Khotsaeng
- Faculty of Science and Health Technology, Kalasin University, Namon District, Kalasin 46230, Thailand;
| | - Wilaiwan Simchuer
- Faculty of Science and Technology, Loei Rajabhat University, Mueang District, Loei 42000, Thailand;
| | - Thanonchat Imsombut
- Department of Rubber and Polymer Technology, Faculty of Science and Technology, Rajabhat Mahasarakham University, Mueang District, Maha Sarakham 44000, Thailand;
| | - Prasong Srihanam
- Biodegradable Polymers Research Unit, Department of Chemistry, Centre of Excellence for Innovation in Chemistry, Faculty of Science, Mahasarakham University, Maha Sarakham 44150, Thailand
| |
Collapse
|
37
|
Fauzan HR, Ningrum A, Supriyadi S. Evaluation of a Fish Gelatin-Based Edible Film Incorporated with Ficus carica L. Leaf Extract as Active Packaging. Gels 2023; 9:918. [PMID: 37999008 PMCID: PMC10671004 DOI: 10.3390/gels9110918] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2023] [Revised: 10/02/2023] [Accepted: 10/09/2023] [Indexed: 11/25/2023] Open
Abstract
The significant concerns associated with the widespread use of petroleum-based plastic materials have prompted substantial research on and development of active food packaging materials. Even though fish gelatin-based films are appealing as active food packaging materials, they present practical production challenges. Therefore, this study aimed to develop an edible film using Ficus carica L. leaf extract (FLE), as it is affordable, accessible, and has superoxide anion radical scavenging action. This edible film was produced by adding FLE to mackerel skin gelatin at varied concentrations (2.5-10% w/w). The results showed that adding FLE to gelatin films significantly affected the tensile strength (TS), elongation at break (EAB), transmittance and transparency, solubility, water vapor permeability (WVP), antioxidant activity, and antibacterial activity. Among all the samples, the most promising result was obtained for the edible film with FLE 10%, resulting in TS, EAB, solubility, WVP, antioxidant activity, and antibacterial activity against S. aureus and E. coli results of 2.74 MPa, 372.82%, 36.20%, 3.96 × 10-11 g/msPa, 45.49%, 27.27 mm, and 25.10 mm, respectively. The study's overall findings showed that fish gelatin-based films incorporated with FLE are promising eco-friendly, biodegradable, and sustainable active packaging materials.
Collapse
Affiliation(s)
| | - Andriati Ningrum
- Department of Food and Agricultural Product Technology, Faculty of Agricultural Technology, Universitas Gadjah Mada, Flora Street No. 1, Bulaksumur, Yogyakarta 55281, Indonesia
| | | |
Collapse
|
38
|
Nangan S, Kanagaraj K, Kaarthikeyan G, Kumar A, Ubaidullah M, Pandit B, Govindasamy R, Natesan T. Sustainable preparation of luminescent carbon dots from syringe waste and hyaluronic acid for cellular imaging and antimicrobial applications. ENVIRONMENTAL RESEARCH 2023; 237:116990. [PMID: 37640096 DOI: 10.1016/j.envres.2023.116990] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2023] [Revised: 08/14/2023] [Accepted: 08/23/2023] [Indexed: 08/31/2023]
Abstract
Addressing the global challenge of persistent waste through an eco-conscious strategy to transform it into valuable and versatile materials holds great significance in today's swiftly evolving world. By adopting a sustainable approach, we can repurpose waste syringes composed of polytetrafluoroethylene (PTFE) into fluorescent carbon dots (CDs) using a simple hydrothermal process. This research harnessed hyaluronic acid to carbonize and modify discarded plastic syringes, resulting in the creation of luminescent syringe carbon dots (SCDs). Rigorous analysis employing diverse techniques delved into their optical attributes, size distribution, and surface characteristics. Extensive biocompatibility assessments using established assay methods confirmed the safety of the derived SCDs, unveiling their potential antibacterial and antifungal traits. Additionally, a confocal microscope was employed to evaluate the cellular imaging capabilities of SCDs on HeLa cells. Notably, at bactericidal concentrations, SCDs exhibited mild cytotoxicity towards mammalian cells, showcasing cell viability surpassing 91.07% at 1 mg/mL. This pioneering exploration paves the way for potential applications of SCD-based nano-bactericides across various biomedical domains. The initial outcomes established herein mark a significant stride towards the creation of cost-effective and ecologically sound fluorescent probes for biomedical imaging, aimed at combating microbial infections. By ingeniously reutilizing polyethylene terephthalate (PET), this investigation offers a sustainable remedy to address the ecological predicaments linked with plastic waste. In doing so, it charts a course towards contributing to the development of affordable, eco-friendly solutions, heralding a promising prospect for a cleaner, healthier environment.
Collapse
Affiliation(s)
- Senthilkumar Nangan
- Department of Chemistry, Graphic Era (Deemed to be University), Bell Road, Clement Town, Dehradun, Uttarakhand, 248002, India
| | - Kuppusamy Kanagaraj
- Center for Supramolecular Chemistry & Catalysis and Department of Chemistry, College of Science, Shanghai University, Shanghai, 200444, China
| | - Gurumoorthy Kaarthikeyan
- Department of Periodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai 600077, Tamil Nadu, India
| | - Anuj Kumar
- Department of Chemistry, GLA University, Mathura, 281406, India
| | - Mohd Ubaidullah
- Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451, Saudi Arabia
| | - Bidhan Pandit
- Department of Materials Science and Engineering and Chemical Engineering, Universidad Carlos III de Madrid, Avenida de la Universidad 30, 28911, Leganés, Madrid, Spain
| | - Rajakumar Govindasamy
- Department of Orthodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Science (SIMATS), Chennai, Tamil Nadu, Chennai, 600077, India
| | - Thirumalaivasan Natesan
- Department of Periodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai 600077, Tamil Nadu, India.
| |
Collapse
|
39
|
Al-Shihabi S, Aydin R, Al Nahlawi M. Forecasting the effects of municipal solid plastic waste generation and streaming using system dynamics: A case study in Dubai. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 897:165204. [PMID: 37392890 DOI: 10.1016/j.scitotenv.2023.165204] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/28/2023] [Revised: 06/03/2023] [Accepted: 06/27/2023] [Indexed: 07/03/2023]
Abstract
To effectively manage municipal solid plastic waste (MSPW), municipalities need to select an appropriate combination of policies and technologies. Numerous policies and technologies are inputs for this selection problem, whereas decision-makers pursue several economic and environmental outcomes. The MSPW flow-controlling variables serve as an intermediary between the inputs and outputs of this selection problem. Examples of the flow-controlling, mediating variables include the source-separated and incinerated MSPW percentages. This study proposes a system dynamics (SD) model that anticipates the influence of these mediating variables on multiple outputs. The outputs include volumes of four MSPW streams and three sustainability-related externalities: GHG emissions reduction, net energy savings, and net profit. Using the SD model, decision-makers can determine the best levels for the mediating variables based on the desired outputs. Consequently, decision-makers can identify the MSPW system stages at which they must choose policies and technologies. Additionally, the values of the mediating variables will help clarify for decision-makers how strict they should be when imposing policies and how much to invest in technologies at the selected MSPW system stages. The SD model is applied to Dubai's MSPW problem. A sensitivity analysis experiment conducted on Dubai's MSPW system demonstrates that the earlier an action is taken, the better the results will be achieved. Consequently, reducing municipal solid waste should take priority, followed by increasing source separation, then post-separation, and finally, incineration with energy recovery. The results of another experiment employing a full factorial design with four mediating variables indicate that recycling would impact GHG emissions and energy reduction values more than incineration with energy recovery. However, these savings are global in nature.
Collapse
Affiliation(s)
- Sameh Al-Shihabi
- Industrial Engineering and Engineering Management Department, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates.
| | - Ridvan Aydin
- Industrial Engineering and Engineering Management Department, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates
| | - Marwa Al Nahlawi
- Industrial Engineering and Engineering Management Department, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates
| |
Collapse
|
40
|
Bourtsalas ACT, Yepes IM, Tian Y. U.S. plastic waste exports: A state-by-state analysis pre- and post-China import ban. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 344:118604. [PMID: 37459814 DOI: 10.1016/j.jenvman.2023.118604] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/29/2023] [Revised: 06/24/2023] [Accepted: 07/07/2023] [Indexed: 09/17/2023]
Abstract
This study analyzes the regional implications of China's 2017 import ban on plastic waste by examining U.S. census data. A statistically significant decrease in total U.S. plastic waste exports was found, dropping from about 1.4 million tons to 0.6 million tons in the post-ban period. California remained the top exporter, throughout both pre- and post-ban periods, while South Carolina exhibited the highest per capita exports. Malaysia emerged as the largest importer of U.S. plastic waste, followed by Vietnam, Indonesia, and Thailand. The ban also led to a change in the composition of the exported plastic waste. Ethylene polymers increased from 32.6% of total exports in the pre-ban period to 46.9% in the post-ban period. Other plastics (vinyl chloride polymers, styrene polymers, and for plastics not elsewhere specified or included) decreased from 67.4% of total exports in the pre-ban period to 53.1% in the post-ban period. Moreover, we found that exporting plastic waste has significant environmental and human health impacts. For example, the Global Warming Potential (GWP) decreased from 20 million tons CO2-eq in the scenario where 100% of plastics are exported, or 25 million tons exported from the U.S. since 2002, to -11.1 million tons CO2-eq in the scenario where 100% of plastics are treated domestically. Transportation exacerbates these impacts for exported waste scenarios, increasing to 5.4 million tons CO2-eq when plastics are exported by ship while decreasing to 0.9 million tons CO2-eq for domestic treatment. Although exporting plastic waste is initially cost-effective, our study highlights that investing in domestic waste management can yield significant long-term benefits, considering the environmental and public health impacts. Therefore, it is crucial to prioritize context-specific solutions to address the challenges of the evolving global plastic waste landscape.
Collapse
Affiliation(s)
- A C Thanos Bourtsalas
- Department of Earth and Environmental Engineering, Columbia University, New York, NY, 10027, USA.
| | - Isabela Maria Yepes
- Department of Earth and Environmental Engineering, Columbia University, New York, NY, 10027, USA
| | - Yixi Tian
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| |
Collapse
|
41
|
Singh AP, Devi AS, Sahoo UK. Quantifying plastic waste generation in Aizawl city, India: waste management and its impact on human and environmental health. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:107390-107402. [PMID: 37178296 DOI: 10.1007/s11356-023-27513-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/08/2022] [Accepted: 05/04/2023] [Indexed: 05/15/2023]
Abstract
Plastic wastes in recent years have become a menace owing to population pressure and high demand of various plastic products in daily use. A study was conducted in Aizawl city of northeast India for a period of 3 years to quantify various types of plastic wastes. Our study found that a present plastic consumption of 13.06 g/capita/day although low when compared to developed countries continues; the generation will be doubled after a decade as the population is projected to double specially due to migration from rural areas. The plastic waste was contributed more by the high-income group of the population with a correlation factor of r = 0.97. Among the total plastic waste, packaging plastics contributed maximum with an average of 52.56% and carry bags among the packaging contribute maximum with 32.55% in the three sectors, namely, residential, commercial, and dumping sites. The result leads to a maximum contribution by the LDPE polymer with 27.46% among seven categories of polymers.
Collapse
Affiliation(s)
- Anil Pratap Singh
- Department of Environmental Science, Mizoram University, Mizoram, India
| | | | | |
Collapse
|
42
|
Chen Z, Zheng R, Bao T, Ma T, Wei W, Shen Y, Ni BJ. Dual-Doped Nickel Sulfide for Electro-Upgrading Polyethylene Terephthalate into Valuable Chemicals and Hydrogen Fuel. NANO-MICRO LETTERS 2023; 15:210. [PMID: 37695408 PMCID: PMC10495299 DOI: 10.1007/s40820-023-01181-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Accepted: 08/10/2023] [Indexed: 09/12/2023]
Abstract
Electro-upcycling of plastic waste into value-added chemicals/fuels is an attractive and sustainable way for plastic waste management. Recently, electrocatalytically converting polyethylene terephthalate (PET) into formate and hydrogen has aroused great interest, while developing low-cost catalysts with high efficiency and selectivity for the central ethylene glycol (PET monomer) oxidation reaction (EGOR) remains a challenge. Herein, a high-performance nickel sulfide catalyst for plastic waste electro-upcycling is designed by a cobalt and chloride co-doping strategy. Benefiting from the interconnected ultrathin nanosheet architecture, dual dopants induced up-shifting d band centre and facilitated in situ structural reconstruction, the Co and Cl co-doped Ni3S2 (Co, Cl-NiS) outperforms the single-doped and undoped analogues for EGOR. The self-evolved sulfide@oxyhydroxide heterostructure catalyzes EG-to-formate conversion with high Faradic efficiency (> 92%) and selectivity (> 91%) at high current densities (> 400 mA cm-2). Besides producing formate, the bifunctional Co, Cl-NiS-assisted PET hydrolysate electrolyzer can achieve a high hydrogen production rate of 50.26 mmol h-1 in 2 M KOH, at 1.7 V. This study not only demonstrates a dual-doping strategy to engineer cost-effective bifunctional catalysts for electrochemical conversion processes, but also provides a green and sustainable way for plastic waste upcycling and simultaneous energy-saving hydrogen production.
Collapse
Affiliation(s)
- Zhijie Chen
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW, 2007, Australia
| | - Renji Zheng
- School of Minerals Processing and Bioengineering, Central South University, Changsha, 410083, People's Republic of China.
| | - Teng Bao
- School of Biology, Food and Environment Engineering, Hefei University, Hefei, 230601, People's Republic of China
| | - Tianyi Ma
- School of Science, STEM College, RMIT University, Melbourne, VIC, 3000, Australia
| | - Wei Wei
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW, 2007, Australia
| | - Yansong Shen
- School of Chemical Engineering, University of New South Wales, Sydney, NSW, 2052, Australia
| | - Bing-Jie Ni
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW, 2007, Australia.
| |
Collapse
|
43
|
Karunarathna B, Wanniarachchi JD, Prashantha MAB, Govender KK. Enhancing styrene monomer recovery from polystyrene pyrolysis: insights from density functional theory. J Mol Model 2023; 29:255. [PMID: 37464131 DOI: 10.1007/s00894-023-05661-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Accepted: 07/12/2023] [Indexed: 07/20/2023]
Abstract
CONTEXT Plastic waste pyrolysis offers a potential solution to reduce plastic accumulation, but prioritizing monomer recovery from the process is crucial to effectively address the environmental consequences of plastic accumulation. This study focuses on enhancing the yield of styrene during the pyrolysis of polystyrene by investigating thermal and kinetic data. A comprehensive investigation into the thermal degradation pathways of polystyrene is imperative to overcome the challenges associated with its waste management. The calculated bond dissociation energies reveal that the cleavage of non-terminal carbon-carbon bonds is energetically favorable, resulting in the formation of high molecular weight benzylic radicals. Based on these findings, four pyrolysis pathways are proposed, and the associated thermodynamic and kinetic parameters are determined using the DFT method. The major products identified in this study include styrene, α-methylstyrene, isopropylbenzene, methylbenzene, ethylbenzene, and methane. Furthermore, optimizing the temperature profile of the reactor is shown to enhance the recovery of styrene, thereby contributing to the reduction of plastic waste. This study provides valuable insights into the effective resource recovery from polystyrene waste pyrolysis, emphasizing the significance of managing pyrolysis conditions to achieve maximum yield. By controlling the temperature profile during the pyrolysis process, it is possible to obtain a high yield of styrene, facilitating the efficient recovery of the monomer from waste polystyrene and addressing the environmental concerns associated with plastic accumulation. METHODS In this study, all calculations were performed using the B3LYP/6-31G(d) level of theory with the Gaussian 16 program package. The proposed model underwent geometry optimization and frequency calculations. Transition states were optimized using the TS Berny method, and energy profiles along reaction pathways were refined using the QST3 method. The IRC method validated proposed mechanisms and investigated energy profiles. Structural models were visualized using GaussView 6.0.
Collapse
Affiliation(s)
- Baggya Karunarathna
- Department of Chemistry, Eastern University Sri Lanka, Vantharumoolai, Chenkalady, Sri Lanka.
| | | | - M A B Prashantha
- Department of Chemistry, University of Sri Jayewardenepura, Gangodawila, Nugegoda, Sri Lanka
| | - K K Govender
- Department of Chemical Sciences, University of Johannesburg, P.O. Box 17011, Doornfontein Campus, 2028, Johannesburg, South Africa
- National Institute for Theoretical and Computational Sciences, NITheCS, Stellenbosch, South Africa
| |
Collapse
|
44
|
Loy ACM, Lim JY, How BS, Yiin CL, Lock SSM, Lim LG, Alhamzi H, Yoo C. Rethinking of the future sustainable paradigm roadmap for plastic waste management: A multi-nation scale outlook compendium. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 881:163458. [PMID: 37068680 DOI: 10.1016/j.scitotenv.2023.163458] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/28/2022] [Revised: 03/13/2023] [Accepted: 04/08/2023] [Indexed: 06/01/2023]
Abstract
The myriad consumption of plastic regularly, environmental impact and health disquietude of humans are at high risk. Along the line, international cooperation on a global scale is epitomized to mitigate the environmental threats from plastic usage, not limited to implementing international cooperation strategies and policies. Here, this study aims to provide explicit insight into possible cooperation strategies between countries on the post-treatment and management of plastic. First, a thorough cradle-to-grave assessment in terms of economic, environmental, and energy requirements is conducted on the entire life cycle across different types of plastic polymers in 6 main countries, namely the United States of America, China, Germany, Japan, South Korea, and Malaysia. Subsequently, P-graph is introduced to identify the integrative plastic waste treatment scheme that minimizes the economic, environmental, and energy criteria (1000 sets of solutions are found). Furthermore, TOPSIS analysis is also being adapted to search for a propitious solution with optimal balance between the dominant configuration of economic, environmental, and energy nexus. The most sustainable configuration (i.e., integrated downcycle and reuse routes in a closed loop system except in South Korea, which proposed another alternative to treat the plastic waste using landfill given the cheaper cost) is reported with 4.08 × 108 USD/yr, 1.76× 108 kg CO2/yr, and 2.73 × 109 MJ/yr respectively. To attain a high precision result, Monte-Carlo simulation is introduced (10,000 attempts) to search for possible uncertainties, and lastly, a potential global plastic waste management scheme is proposed via the PESTLE approach.
Collapse
Affiliation(s)
- Adrian Chun Minh Loy
- Department of Chemical and Biological Engineering, Monash University, Victoria 3800, Australia
| | - Juin Yau Lim
- Integrated Engineering, Dept. of Environmental Science and Engineering, College of Engineering, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-Si, Gyeonggi-do 17104, Republic of Korea
| | - Bing Shen How
- Biomass Waste-to-Wealth Special Interest Group, Research Centre for Sustainable Technologies, Faculty of Engineering, Computing and Science, Swinburne University of Technology, Jalan Simpang Tiga, 93350 Kuching, Sarawak, Malaysia.
| | - Chung Loong Yiin
- Department of Chemical Engineering and Energy Sustainability, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia; Institute of Sustainable and Renewable Energy (ISuRE), Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia
| | - Serene Sow Mun Lock
- CO(2) Research Center (CO(2)RES), Department of Chemical Engineering, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Malaysia
| | - Lam Ghai Lim
- Department of Electrical and Robotics Engineering, School of Engineering, Monash University Malaysia, Jalan Lagoon Selatan, 47500 Bandar Sunway, Selangor, Malaysia
| | - Hatem Alhamzi
- National Center for Environmental Technology (NCET), King Abdulaziz City for Science and Technology (KACST), P.O. Box 6086, 11442 Riyadh, Saudi Arabia.
| | - ChangKyoo Yoo
- Integrated Engineering, Dept. of Environmental Science and Engineering, College of Engineering, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-Si, Gyeonggi-do 17104, Republic of Korea.
| |
Collapse
|
45
|
Samal A, Das N. Mini-review on remediation of plastic pollution through photoreforming: progress, possibilities, and challenges. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:83138-83152. [PMID: 37351752 DOI: 10.1007/s11356-023-28253-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/20/2023] [Accepted: 06/10/2023] [Indexed: 06/24/2023]
Abstract
The increasing plastic pollution has raised significant concerns about the environment and the destruction of its precious resources. Making value-added products out of plastic waste is an effective way to reduce plastic pollution and use it as a valuable resource. Plastic reforming driven by sunlight offers a quick and low-energy way to produce hydrogen from waste. Photoreforming of plastic waste is an emerging technology that cannot only break down plastic polymer waste into value-added chemicals but also produce solar fuel cell quality H2. Technologies, such as pyrolysis, combustion, and advanced oxidation, are right now being studied for converting plastic pollution into energy. A thorough summary and comparison of different technologies have not yet been published. Open dumping and combustion are two main steps to deal with waste plastics, but these processes experience inefficiencies and cannot adequately address the challenges. In this mini-review, we aimed to provide a short overview of the recently reported conventional and novel plastic waste treatment methods. The current research on the photoreforming of plastics conducted by various groups and some advantages and disadvantages of this practice has been discussed thoroughly. Also, some notes were made on the prospective future scope present in this particular research area to achieve a carbon-free fuel system. The purpose of this review is to encourage the utilisation of plastic garbage as an alternative source of energy.
Collapse
Affiliation(s)
- Alaka Samal
- Department of Chemistry, Utkal University, Bhubaneswar, Odisha, 751 004, India
| | - Nigamananda Das
- Department of Chemistry, Utkal University, Bhubaneswar, Odisha, 751 004, India.
| |
Collapse
|
46
|
Chang SH. Plastic waste as pyrolysis feedstock for plastic oil production: A review. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 877:162719. [PMID: 36933741 DOI: 10.1016/j.scitotenv.2023.162719] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/05/2023] [Revised: 02/15/2023] [Accepted: 03/04/2023] [Indexed: 05/06/2023]
Abstract
Turning plastic waste into plastic oil by pyrolysis is one of the promising techniques to eradicate plastic waste pollution and accelerate the circular economy of plastic materials. Plastic waste is an attractive pyrolysis feedstock for plastic oil production owing to its favorable chemical properties of proximate analysis, ultimate analysis, and heating value other than its abundant availability. Despite the exponential growth of scientific output from 2015 to 2022, a vast majority of the current review articles cover the pyrolysis of plastic waste into a series of fuels and value-added products, and up-to-date reviews exclusively on plastic oil production from pyrolysis are relatively scarce. In light of this void in the current review articles, this review attempts to provide an up-to-date overview of plastic waste as pyrolysis feedstock for plastic oil production. A particular emphasis is placed on the common types of plastic as primary sources of plastic pollution, the characteristics (proximate analysis, ultimate analysis, hydrogen/carbon ratio, heating value, and degradation temperature) of various plastic wastes and their potential as pyrolysis feedstock, and the pyrolysis systems (reactor type and heating method) and conditions (temperature, heating rate, residence time, pressure, particle size, reaction atmosphere, catalyst and its operation modes, and single and mixed plastic wastes) used in plastic waste pyrolysis for plastic oil production. The characteristics of plastic oil from pyrolysis in terms of physical properties and chemical composition are also outlined and discussed. The major challenges and future prospects for the large-scale production of plastic oil from pyrolysis are also addressed.
Collapse
Affiliation(s)
- Siu Hua Chang
- Waste Management and Resource Recovery (WeResCue) Group, Chemical Engineering Studies, College of Engineering, Universiti Teknologi MARA, Cawangan Pulau Pinang, 13500 Permatang Pauh, Penang, Malaysia.
| |
Collapse
|
47
|
Kalenjuk Pivarski B, Tekić D, Šmugović S, Banjac M, Novaković A, Mutavdžić B, Ivanović V, Tešanović D, Đerčan B, Ikonić P, Petrović M, Udovičić DI, Popović AV, Marić A. Factors Affecting the Consumption of Traditional Food in Tourism-Perceptions of the Management Sector of Catering Facilities. Foods 2023; 12:2338. [PMID: 37372549 DOI: 10.3390/foods12122338] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Revised: 06/01/2023] [Accepted: 06/03/2023] [Indexed: 06/29/2023] Open
Abstract
The topic of this study is the factors that influence the consumption of traditional food products (TFPs) in tourism, as seen from the perspective of management-sector employees in food and beverage catering facilities. The paper aims to analyse the economic, environmental, social, and touristic factors that highly influence the consumption patterns of catering facilities which are significant providers of traditional gastronomic experiences in tourism, by using the specially designed TFPct scale. The study was conducted on a sample of 300 catering facilities in AP Vojvodina (the Republic of Serbia). An explanatory factor analysis was used to confirm the key factors that influence the consumption of traditional products used to prepare the meals that are a part of what catering facilities offer. Subsequently, a binary logistics regression model was used to establish which of the indicated factors has a statistically significant effect on the management's decision to purchase these products for their catering facility. The study showed that the TFPct scale is appropriate for this type of research, and that economic factors are key factors in the consumption of traditional products. Moreover, compared with other types of catering facilities, interest in the consumption of these products is clearly expressed by a la carte restaurants.
Collapse
Affiliation(s)
- Bojana Kalenjuk Pivarski
- Department of Geography, Tourism and Hotel Management, Faculty of Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
- Faculty of Economics, University of East Sarajevo, 71420 Pale, Bosnia and Herzegovina
| | - Dragana Tekić
- Department of Agricultural Economics and Rural Sociology, Faculty of Agriculture, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Stefan Šmugović
- Department of Geography, Tourism and Hotel Management, Faculty of Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Maja Banjac
- Department of Geography, Tourism and Hotel Management, Faculty of Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Aleksandra Novaković
- Faculty of Education, University of East Sarajevo, 76300 Bijeljina, Bosnia and Herzegovina
| | - Beba Mutavdžić
- Department of Agricultural Economics and Rural Sociology, Faculty of Agriculture, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Velibor Ivanović
- Department of Geography, Tourism and Hotel Management, Faculty of Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Dragan Tešanović
- Department of Geography, Tourism and Hotel Management, Faculty of Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Bojan Đerčan
- Department of Geography, Tourism and Hotel Management, Faculty of Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Predrag Ikonić
- Institute of Food Technology, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Marica Petrović
- Department of Agricultural Economics and Rural Sociology, Faculty of Agriculture, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Dragana Ilić Udovičić
- Academy of Professional Studies Šabac, Department of Medical and Business-Technological Studies, 15000 Šabac, Serbia
| | - Aleksandra Vasić Popović
- Academy of Professional Studies Šabac, Department of Medical and Business-Technological Studies, 15000 Šabac, Serbia
| | - Aleksandar Marić
- Institute of Food Technology, University of Novi Sad, 21000 Novi Sad, Serbia
| |
Collapse
|
48
|
Ragusa A, De Luca C, Zucchelli E, Rinaldo D, Svelato A. Plastic, microplastic, and the inconsistency of human thought. Front Public Health 2023; 11:1145240. [PMID: 37342277 PMCID: PMC10277741 DOI: 10.3389/fpubh.2023.1145240] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2023] [Accepted: 05/11/2023] [Indexed: 06/22/2023] Open
Affiliation(s)
- Antonio Ragusa
- Department of Obstetrics and Gynecology, Campus Bio-Medico University Hospital Foundation Rome, Rome, Italy
| | - Caterina De Luca
- Department of Obstetrics and Gynecology, Fatebenefratelli Gemelli Hospital, Isola Tiberina, Rome, Italy
| | - Emma Zucchelli
- Instituto de Salud Global, Universitat de Barcelona, Barcelona, Spain
| | - Denise Rinaldo
- Department of Obstetrics and Gynecology, Azienda Socio Sanitaria Territoriale (ASST) Bergamo Est, Bolognini Hospital, Seriate, Italy
| | - Alessandro Svelato
- Department of Obstetrics and Gynecology, Fatebenefratelli Gemelli Hospital, Isola Tiberina, Rome, Italy
| |
Collapse
|
49
|
Vlad-Bubulac T, Hamciuc C, Serbezeanu D, Suflet DM, Rusu D, Lisa G, Anghel I, Preda DM, Todorova T, Rîmbu CM. Organophosphorus Reinforced Poly(vinyl alcohol) Nanocomposites Doped with Silver-Loaded Zeolite L Nanoparticles as Sustainable Materials for Packaging Applications. Polymers (Basel) 2023; 15:polym15112573. [PMID: 37299371 DOI: 10.3390/polym15112573] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Revised: 05/30/2023] [Accepted: 05/31/2023] [Indexed: 06/12/2023] Open
Abstract
The sustainable development of innovative eco-friendly multifunctional nanocomposites, possessing superior characteristics, is a noteworthy topic. Novel semi-interpenetrated nanocomposite films based on poly(vinyl alcohol) covalently and thermally crosslinked with oxalic acid (OA), reinforced with a novel organophosphorus flame retardant (PFR-4) derived from co-polycondensation in solution reaction of equimolar amounts of co-monomers, namely, bis((6-oxido-6H-dibenz[c,e][1,2]oxaphosphorinyl)-(4-hydroxyaniline)-methylene)-1,4-phenylene, bisphenol S, and phenylphosphonic dichloride, in a molar ratio of 1:1:2, and additionally doped with silver-loaded zeolite L nanoparticles (ze-Ag), have been prepared by casting from solution technique. The morphology of the as prepared PVA-oxalic acid films and their semi-interpenetrated nanocomposites with PFR-4 and ze-Ag was investigated by scanning electron microscopy (SEM), while the homogeneous distribution of the organophosphorus compound and nanoparticles within the nanocomposite films has been introspected by means of energy dispersive X-ray spectroscopy (EDX). It was established that composites with a very low phosphorus content had noticeably improved flame retardancy. The peak of the heat release rate was reduced up to 55%, depending on the content of the flame-retardant additive and the doping ze-Ag nanoparticles introduced into the PVA/OA matrix. The ultimate tensile strength and elastic modulus increased significantly in the reinforced nanocomposites. Considerably increased antimicrobial activity was revealed in the case of the samples containing silver-loaded zeolite L nanoparticles.
Collapse
Affiliation(s)
- Tăchiță Vlad-Bubulac
- "Petru Poni" Institute of Macromolecular Chemistry, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania
| | - Corneliu Hamciuc
- "Petru Poni" Institute of Macromolecular Chemistry, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania
| | - Diana Serbezeanu
- "Petru Poni" Institute of Macromolecular Chemistry, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania
| | - Dana Mihaela Suflet
- "Petru Poni" Institute of Macromolecular Chemistry, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania
| | - Daniela Rusu
- "Petru Poni" Institute of Macromolecular Chemistry, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania
| | - Gabriela Lisa
- Department of Chemical Engineering, Faculty of Chemical Engineering and Environmental Protection, "Gheorghe Asachi" Technical University of Iasi, 73 Bd. Mangeron, 700050 Iasi, Romania
| | - Ion Anghel
- Fire Officers Faculty, Police Academy "Alexandru Ioan Cuza", Morarilor Str. 3, Sector 2, 022451 Bucharest, Romania
| | - Dana-Maria Preda
- Fire Officers Faculty, Police Academy "Alexandru Ioan Cuza", Morarilor Str. 3, Sector 2, 022451 Bucharest, Romania
| | - Totka Todorova
- Institute of Catalysis, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl.11, 1113 Sofia, Bulgaria
| | - Cristina Mihaela Rîmbu
- Department of Public Health, Iasi University of Life Sciences, 8 Sadoveanu Alley, 707027 Iasi, Romania
| |
Collapse
|
50
|
Fu X, Liu L, Han H, Li Y, Si S, Xu B, Dai W, Yang H, He T, Du X, Pei X. Integrated fecal microbiome and metabolome analysis explore the link between polystyrene nanoplastics exposure and male reproductive toxicity in mice. ENVIRONMENTAL TOXICOLOGY 2023; 38:1277-1291. [PMID: 36880397 DOI: 10.1002/tox.23763] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2022] [Revised: 02/07/2023] [Accepted: 02/20/2023] [Indexed: 05/18/2023]
Abstract
Microplastics (MPs) and nanoplastics (NPs) are novel environmental pollutants that are ubiquitous in the environment and everyday life. NPs can easily enter the tissues and have more significant potential health risks due to their smaller diameter. Previous studies have shown that NPs can induce male reproductive toxicity, but the detailed mechanisms remain uncertain. In this study, intragastric administration treated mice with polystyrene NPs (PS-NPs, 50, and 90 nm) at 3 and 15 mg/mL/day doses for 30 days. Then, the fresh fecal samples were collected from those mice that the exposure doses of 50 nm PS-NPs at 3 mg/mL/day and 90 nm at 15 mg/mL/day for subsequent investigations of 16S rRNA and metabolomics according to significant toxicological effects (Sperm number, viability, abnormality, and testosterone level). The conjoint analysis findings indicated that PS-NPs disrupted the homeostasis of the gut microbiota, metabolism, and male reproduction, suggesting that abnormal gut microbiota-metabolite pathways may be important in PS-NPs-induced male reproductive toxicity. Meanwhile, the common differential metabolites such as 4-deoxy-Erythronic acid, 8-iso-15-keto-PGE2, apo-10'-violaxanthin, beta-D-glucosamine, isokobusone, oleamide, oxoadipic acid, sphingosine induced by 50 and 90 nm PS-NPs might be used as biomarkers to explore PS-NPs-induced male reproductive toxicity. In addition, this study systematically demonstrated that nano-scale PS-NPs induced male reproductive toxicity via the crosstalk of gut microbiota and metabolites. It also provided valuable insights into the toxicity of PS-NPs, which was conducive to reproductive health risk assessment for public health prevention and treatment.
Collapse
Affiliation(s)
- Xufeng Fu
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Ling Liu
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Hang Han
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Yuanyuan Li
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing, China
| | - Shengbin Si
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Bo Xu
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Wenjie Dai
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Hong Yang
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Tiantian He
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Xing Du
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| | - Xiuying Pei
- Key Laboratory of Fertility Preservation and Maintenance of Ministry of Education, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan, China
| |
Collapse
|