Chitosan based micro- and nanoparticles for colon-targeted delivery of vancomycin prepared by alternative processing methods

Polymeric Anti-Antibiotic Microparticles to Prevent Antibiotic Resistance Evolution

Vancomycin (VAN) and daptomycin (DAP) are among the last-resort antibiotics for treating multidrug-resistant Gram-positive bacterial infections. They are administered intravenously (IV); however, ≈5 - 10% of the total IV dose is released in the gastrointestinal (GI) tract via biliary excretion, driving resistance emergence in commensal Enterococcus faecium (E. faecium) populations. Here, it is reported that sevelamer (SEV), a Food and Drug Administration (FDA)-approved anion-exchange polymeric microparticle, captures anionic DAP within minutes and cationic VAN within hours, inactivating the antibacterial efficacy of DAP and VAN. In vitro SEV-mediated VAN or DAP transient removal is successfully described by a diffusion-adsorption mechanism. In vivo oral SEV treatment effectively prevented VAN resistance enrichment following the VAN treatment of E. faecium-colonized mice. This work shows, for the first time, that the adjuvant SEV therapy prevents antimicrobial resistance in nosocomial pathogens by eliminating off-target antibiotics. It is envisioned that SEV may protect DAP and VAN from resistance development, potentially addressing the long-lasting antimicrobial resistance.

Nanoencapsulation of active compounds in chitosan by ionic gelation: Physicochemical, active properties and application in packaging

The ionic gelation technique using chitosan to encapsulate active compounds has received lots of attention in the literature due to its ease-of-use and known biodegradability, biocompatibility and antimicrobial properties of the polymer. In this review, main studies from the last five years involving encapsulation of active compounds (natural and commercial/synthetic) are brought together in order to understand the encapsulation mechanisms of components with chitosan as well as the physical, chemical and morphological properties of the resulting particles. The application of these nanostructures in polymeric films was then investigated, since additives for packaging are an attractive premise and have only recently started being studied in the literature. Herein, comparisons are made between free and encapsulated bioactive compounds in different film matrices, as well as the effect of this activation on structure. Finally, this work details the mechanisms involved in the production of chitosan nanoparticles with active compounds and encourages new studies to focus on their application in packaging.

Design of chitosan colon delivery micro/nano particles for an Achillea millefolium extract with antiproliferative activity against colorectal cancer cells

In this study, chitosan low molecular weight (LCH) and chitosan medium molecular weight (MCH) were employed to encapsulate a yarrow extract rich in chlorogenic acid and dicaffeoylquinic acids (DCQAs) that showed antiproliferative activity against colon adenocarcinoma cells. The design of CH micro/nanoparticles to increase the extract colon delivery was carried out by using two different techniques: ionic gelation and spray drying. Ionic gelation nanoparticles obtained were smaller and presented higher yields values than spray-drying microparticles, but spray-drying microparticles showed the best performance in terms of encapsulation efficiency (EE) (> 94%), also allowing the inclusion of a higher quantity of extract. Spray-drying microparticles designed using LCH with an LCH:extract ratio of 6:1 (1.25 mg/mL) showed a mean diameter of 1.31 ± 0.21 µm and EE values > 93%, for all phenolic compounds studied. The release profile of phenolic compounds included in this formulation, at gastrointestinal pHs (2 and 7.4), showed for most of them a small initial release, followed by an increase at 1 h, with a constant release up to 3 h. Chlorogenic acid presented the higher release values at 3 h (56.91% at pH 2; 44.45% at pH 7.4). DCQAs release at 3 h ranged between 9.01- 40.73%, being higher for 1,5- and 3,4-DCQAs. After gastrointestinal digestion, 67.65% of chlorogenic and most DCQAs remained encapsulated. Therefore, spray-drying microparticles can be proposed as a promising vehicle to increase the colon delivery of yarrow phenolics compounds (mainly chlorogenic acid and DCQAs) previously described as potential agents against colorectal cancer.

Advances in Transdermal Delivery of Antimicrobial Peptides for Wound Management: Biomaterial-Based Approaches and Future Perspectives

Antimicrobial peptides (AMPs), distinguished by their cationic and amphiphilic nature, represent a critical frontier in the battle against antimicrobial resistance due to their potent antimicrobial activity and a broad spectrum of action. However, the clinical translation of AMPs faces hurdles, including their susceptibility to degradation, limited bioavailability, and the need for targeted delivery. Transdermal delivery has immense potential for optimizing AMP administration for wound management. Leveraging the skin's accessibility and barrier properties, transdermal delivery offers a noninvasive approach that can circumvent systemic side effects and ensure sustained release. Biomaterial-based delivery systems, encompassing nanofibers, hydrogels, nanoparticles, and liposomes, have emerged as key players in enhancing the efficacy of transdermal AMP delivery. These biomaterial carriers not only shield AMPs from enzymatic degradation but also provide controlled release mechanisms, thereby elevating stability and bioavailability. The synergistic interaction between the transdermal approach and biomaterial-facilitated formulations presents a promising strategy to overcome the multifaceted challenges associated with AMP delivery. Integrating advanced technologies and personalized medicine, this convergence allows the reimagining of wound care. This review amalgamates insights to propose a pathway where AMPs, transdermal delivery, and biomaterial innovation harmonize for effective wound management.

Multifunctional Biocomposites: Synthesis, Characterization, and Prospects for Regenerative Medicine and Controlled Drug Delivery

This article presents a new method for preparing multifunctional composite biomaterials with applications in advanced biomedical fields. The biomaterials consist of dicalcium phosphate (DCPD) and bioactive silicate glasses (SiO2/Na2O and SiO2/K2O), containing the antibiotic streptomycin sulfate. Materials were deeply characterized by X-ray diffraction and attenuated total reflectance Fourier transform infrared spectroscopy, and zeta potential analysis, UV-visible spectrophotometry, and ion-exchange measurement were applied in a simulating body fluid (SBF) solution. The main results include an in situ chemical transformation of dicalcium phosphate into an apatitic phase under the influence of silicate solutions and the incorporation of the antibiotic. The zeta potential showed a decrease in surface charge from ζ = -24.6 mV to ζ = -16.5 mV. In addition, a controlled and prolonged release of antibiotics was observed over a period of 37 days, with a released concentration of up to 755 ppm. Toxicity tests in mice demonstrated good tolerance of the biomaterials, with no significant adverse effects. Moreover, these biomaterials have shown potent antibacterial activity against various bacterial strains, including Listeria monocytogenes, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, suggesting their potential use in tissue engineering, drug delivery, and orthopedic and dental implants. By integrating the antibiotic into the biomaterial composites, we achieved controlled release and prolonged antibacterial efficacy. This research contributes to advancing biomaterials by exploring innovative synthetic routes and showcasing their promise in regenerative medicine and controlled drug delivery.

Chitosan microparticles mitigate nitrogen deficiency in tomato plants

Nitrogen (N) deficiency is one of the most prevalent nutrient deficiencies in plants, and has a significant impact on crop yields. In this work we aimed to develop and evaluate innovative strategies to mitigate N deficiency. We studied the effect of supplementing tomato plants grown under suboptimal N nutrition with chitosan microparticles (CS-MPs) during short- and long-term periods. We observed that the supplementation with CS-MPs prevented the reduction of aerial biomass and the elongation of lateral roots (LR) triggered by N deficiency in tomato plantlets. In addition, levels of nitrates, amino acids and chlorophyll, which decreased drastically upon N deficiency, were either partial or totally restored upon CS-MPs addition to N deficient media. Finally, we showed that CS-MPs treatments increased nitric oxide (NO) levels in root tips and caused the up-regulation of genes involved in N metabolism. Altogether, we suggest that CS-MPs enhance the growth and development of tomato plants under N deficiency through the induction of biochemical and transcriptional responses that lead to increased N metabolism. We propose treatments with CS-MPs as an efficient practice focused to mitigate the nutritional deficiencies in N impoverished soils.

A promising eco-sustainable wound dressing based on cellulose extracted from Spartium junceum L. and impregnated with Glycyrrhiza glabra L extract: Design, production and biological properties

Glycyrrhiza glabra extract is widely known for its antioxidant and anti-inflammatory properties and can improve the wound healing process. The aim of this work was to shorten the time of the healing process by using an eco-sustainable wound dressing based on Spanish broom flexible cellulosic fabric by impregnation with G. glabra extract-loaded ethosomes. Chemical analysis of G. glabra extract was performed by LC-DAD-MS/MS and its encapsulation into ethosomes was obtained using the ethanol injection method. Lipid vesicles were characterized in terms of size, polydispersity index, entrapment efficiency, zeta potential, and stability. In vitro release studies, biocompatibility, and scratch test on 3T3 fibroblasts were performed. Moreover, the structure of Spanish broom dressing and its ability to absorb wound exudate was characterized by Synchrotron X-ray phase contrast microtomography (SR-PCmicroCT). Ethosomes showed a good entrapment efficiency, nanometric size, good stability over time and a slow release of polyphenols compared to the free extract, and were not cytotoxic. Lastly, the results revealed that Spanish broom wound dressing loaded with G. glabra ethosomes is able to accelerate wound closure by reducing wound healing time. To sum up, Spanish broom wound dressing could be a potential new green tool for biomedical applications.

Porous Chitosan/Hydroxyapatite Composite Microspheres for Vancomycin Loading and Releasing

Porous chitosan/hydroxyapatite (Chi-HAp) composite microspheres were prepared in an aqueous solution containing chitosan, calcium nitrate, and ammonium dihydrogen phosphate by using a hydrothermal method at various temperatures. The investigation indicated that temperature significantly impacted the final product's appearance. Hydroxyapatite (HAp) coupled with dicalcium phosphate dihydrate (DCPD) flakes were obviously found at 65 and 70 °C, while the latter gradually disappeared at higher temperatures. Conversely, synthesis at 90 °C led to smaller particle sizes due to the broken chitosan chains. The microspheres synthesized at 75 °C were selected for further analysis, revealing porous structures with specific surface areas of 36.66 m2/g, pores ranging from 3 to 100 nm, and pore volumes of 0.58 cm3/g. Vancomycin (VCM), an antibiotic, was then absorbed on and released from the microspheres derived at 75 °C, with a drug entrapment efficiency of 20% and a release duration exceeding 20 days. The bacteriostatic activity of the VCM/composite microspheres against Staphylococcus aureus increased with the VCM concentration and immersion time, revealing a stable inhibition zone diameter of approximately 4.3 mm from 24 to 96 h, and this indicated the retained stability and efficacy of the VCM during the encapsulating process.

Novel Ti surface coated with PVA hydrogel and chitosan nanoparticles with antibacterial drug release: An experimental in vitro study

OBJECTIVES

The aims of this study were to design a novel titanium surface coated with a PVA hydrogel matrix and chitosan-based nanoparticles and to investigate the antibiotic release and its ability to inhibit microbial activity.

METHODS

Two drug delivery systems were developed and mixed. Chitosan-based nanoparticles (NP) and a polyvinyl alcohol film (PVA). The size, ζ-potential, stability, adhesive properties, and encapsulation profile of NP, as well as the release kinetics of drug delivery systems and their antimicrobial ability of PVA and PVANP films, were studied on Ti surfaces. The systems were loaded with doxycycline, vancomycin, and doxepin hydrochloride.

RESULTS

Nanoparticles presented a ζ-potential greater than 30 mV for 45 days and the efficiency drug encapsulation was 26.88% ± 1.51% for doxycycline, 16.09% ± 10.24% for vancomycin and 17.57% ± 11.08% for doxepin. In addition, PVA films were loaded with 125 μg/mL of doxycycline, 125 μg/mL of vancomycin, and 100 μg/mL of doxepin. PVANP-doxycycline achieved the antibacterial effect at 4 h while PVA-doxycycline maintained its effect at 24 h.

Development of Pectin Particles as a Colon-Targeted Marjoram Phenolic Compound Delivery System

Marjoram is a culinary herb that has been widely employed in folk medicine and presents a high content in phenolics. Thus, the aim of this project was to design formulations to encapsulate phenolic compounds from marjoram to allow their release in the colon. For this purpose, pectin was used as an encapsulating agent, applying two different encapsulation techniques (ionic gelation and spray-drying), followed by a CaCl2 bath. The ionic gelation technique showed a higher yield (77%) compared to spray-drying (31%), and the particles obtained were smaller (267 nm). However, the microparticles obtained by spray-drying presented a higher encapsulation efficiency (93%). Moreover, spray-dried microparticles protected a higher percentage of the encapsulated phenolics from the action of gastrointestinal pHs and enzymes. Hence, the results showed that spray-drying was a more appropriate technique than ionic gelation for the encapsulation of marjoram phenolics in order to protect them during the gastrointestinal step, facilitating their arrival in the colon. These microparticles would also be suitable for inclusion in food matrices for the development of phenolic colon delivery systems.

Tannic Acid Tailored-Made Microsystems for Wound Infection

Difficult-to-treat infections make complex wounds a problem of great clinical and socio-economic impact. Moreover, model therapies of wound care are increasing antibiotic resistance and becoming a critical problem, beyond healing. Therefore, phytochemicals are promising alternatives, with both antimicrobial and antioxidant activities to heal, strike infection, and the inherent microbial resistance. Hereupon, chitosan (CS)-based microparticles (as CM) were designed and developed as carriers of tannic acid (TA). These CMTA were designed to improve TA stability, bioavailability, and delivery in situ. The CMTA were prepared by spray dryer technique and were characterized regarding encapsulation efficiency, kinetic release, and morphology. Antimicrobial potential was evaluated against methicillin-resistant and methicillin-sensitive Staphylococcus aureus (MRSA and MSSA), Staphylococcus epidermidis, Escherichia coli, Candida albicans, and Pseudomonas aeruginosa strains, as common wound pathogens, and the agar diffusion inhibition growth zones were tested for antimicrobial profile. Biocompatibility tests were performed using human dermal fibroblasts. CMTA had a satisfactory product yield of ca. 32% and high encapsulation efficiency of ca. 99%. Diameters were lower than 10 μm, and the particles showed a spherical morphology. The developed microsystems were also antimicrobial for representative Gram+, Gram-, and yeast as common wound contaminants. CMTA improved cell viability (ca. 73%) and proliferation (ca. 70%) compared to free TA in solution and even compared to the physical mixture of CS and TA in dermal fibroblasts.

Perspectives of colon-specific drug delivery in the management of morning symptoms of rheumatoid arthritis

Rheumatoid arthritis is a chronic condition that is characterized by joint pain and inflammation. It is an autoimmune disorder in which the body tissues are erroneously attacked by the immune system of the host itself. It has been evident that rheumatoid arthritis symptoms follow a 24 h circadian rhythm and exhibit high thresholds of pain, functional disability, and stiffness predominantly early in the morning. Colon-specific drug delivery systems can be utilized in the formulations to be used in the treatment of rheumatoid arthritis. The colon-specific drug delivery system has shown promising results in the treatment of different diseases at the colonic site like Crohn's disease, ulcerative colitis, colon cancer, etc. The colon-specific drug delivery is capable of delivering the formulation at the predetermined location and predetermined time. The early morning symptoms of rheumatoid arthritis like pain and inflammation can be treated using the various approaches of the colon-specific drug delivery system because it will lead to patient compliance as the patient will not require administering the formulation immediately after waking up in the morning. This review also explains the immunological factors which may trigger rheumatoid arthritis in human beings. It further explores conventional approaches like pH-dependant, microorganisms-driven, pressure-controlled, and time-dependant formulations. By employing two or more conventional approaches given above the various novel approaches have been designed to eliminate the drawbacks of individual techniques.

Encapsulation of Marjoram Phenolic Compounds Using Chitosan to Improve Its Colon Delivery

In this study, chitosan particles were used to encapsulate marjoram phenolic compounds as colon-specific drug-delivery systems. The microparticles were prepared by ionic gelation and spray-drying techniques and varying amounts of polymer and extract, along with different method conditions. The spray drying of microparticles (0.75% low molecular weight chitosan dissolved in 0.4% of acetic acid) presented the best encapsulation efficiency (near 75%), with size ranges from 1.55 to 1.68 µm that allowed the encapsulation of 1.25-1.88 mg/mL of extract. Release studies of individual marjoram phenolic compounds at pH 2 and 7.4 showed that most of the compounds remained encapsulated in the microparticles. Only arbutin and vicenin II presented a high initial burst release. As the polarity of the compounds was reduced, their initial release decreased. In addition, after gastrointestinal digestion, most of marjoram phenolic compounds remained encapsulated. These results prove that chitosan microparticlescould protect the marjoram phenolic compounds during gastrointestinal digestion, specifically those related to anticancer activity, which enables their application as colon-specific delivery systems.

Silica-Coated Magnetic Nanoparticles for Vancomycin Conjugation

Drug resistance is a global health challenge with thousands of deaths annually caused by bacterial multidrug resistance (MDR). Efforts to develop new antibacterial molecules do not meet the mounting needs imposed by the evolution of MDR. An alternative approach to overcome this challenge is developing targeted formulations that can enhance the therapeutic efficiency and limit side effects. In this aspect, vancomycin is a potent antibacterial agent that has inherent bacterial targeting properties by binding to the D-Ala-D-Ala moiety of the bacterial peptidoglycan. However, the use of vancomycin is associated with serious side effects that limit its clinical use. Herein, we report the development of vancomycin-conjugated magnetic nanoparticles using a simple conjugation method for targeted antibacterial activity. The nanoparticles were synthesized using a multistep process that starts by coating the nanoparticles with a silica layer, followed by binding an amide linker and then binding the vancomycin glycopeptide. The developed vancomycin-conjugated magnetic nanoparticles were observed to exhibit a spherical morphology and a particle size of 16.3 ± 2.6 nm, with a silica coating thickness of 5 nm and a total coating thickness of 8 nm. The vancomycin conjugation efficiency on the nanoparticles was measured spectrophotometrically to be 25.1%. Additionally, the developed formulation retained the magnetic activity of the nanoparticles, where it showed a saturation magnetization value of 51 emu/g, compared to 60 emu/g for bare magnetic nanoparticles. The in vitro cell biocompatibility demonstrated improved safety where vancomycin-conjugated nanoparticles showed IC₅₀ of 183.43 μg/mL, compared to a much lower value of 54.11 μg/mL for free vancomycin. While the antibacterial studies showed a comparable activity of the developed formulation, the minimum inhibitory concentration was 25 μg/mL, compared to 20 μg/mL for free vancomycin. Accordingly, the reported formulation can be used as a platform for the targeted and efficient delivery of other drugs.

Encapsulation of phlorotannins from edible brown seaweed in chitosan: Effect of fortification on bioactivity and stability in functional foods

Phlorotannins are a family of proven therapeutic agents. However, low stability disturbs their full bioactivity expression in the human body. Hence, this study focused on preserving their vitality through encapsulation. Phlorotannins isolated from Sargassum ilicifolium were encapsulated in the chitosan-tripolyphosphate carrier. Their storage stability, processing stability, and bioactivity retention upon in vitro digestion were determined. Results revealed the highest total phlorotannin content (TPC) of 854.38 ± 48 mg Phloroglucinol Equivalence/g in the semi-purified ethyl acetate fraction while the NMR spectrum and the LCMS profile revealed the isolation of phlorotannins in it. Storage at -18℃ and 4℃ temperatures preserved thrice both the encapsulated and non-encapsulated phlorotannins than ambient conditions. Encapsulated compound reported 56.4% of TPC retention at 175 ℃ processing temperature. Fermented fraction of encapsulated form showed significantly higher (p < 0.05) antioxidant activities and TPC (0.23 ± 0.03 mg/mL) suggesting the potential for targeted delivery of phlorotannins to their absorption sites through encapsulation.

Nanoantibiotics to fight multidrug resistant infections by Gram-positive bacteria: hope or reality?

The spread of antimicrobial resistance in Gram-positive pathogens represents a threat to human health. To counteract the current lack of novel antibiotics, alternative antibacterial treatments have been increasingly investigated. This review covers the last decade's developments in using nanoparticles as carriers for the two classes of frontline antibiotics active on multidrug-resistant Gram-positive pathogens, i.e., glycopeptide antibiotics and daptomycin. Most of the reviewed papers deal with vancomycin nanoformulations, being teicoplanin- and daptomycin-carrying nanosystems much less investigated. Special attention is addressed to nanoantibiotics used for contrasting biofilm-associated infections. The status of the art related to nanoantibiotic toxicity is critically reviewed.

Hyaluronic acid-coated chitosan nanoparticles as targeted-carrier of tamoxifen against MCF7 and TMX-resistant MCF7 cells

Tamoxifen (TMX) is used to treat hormone-receptor-positive breast cancers at early stages. This research aimed to assess the potential of NPs in targeted delivery of TMX against MCF7 and TMX-resistant MCF7 breast cancer cell lines. For this purpose, a targeted delivery system including chitosan NPs coated with hyaluronic acid (HA-CS NPs) was created and examined in vitro. Chitosan NPs were first fabricated and loaded with TMX using the ionic-gelation method to prepare a drug-delivery system. Then, TMX-loaded CS NPs were coated by crosslinking the amino groups of chitosan to the carboxylic group of hyaluronic acid. The developed TMX delivery system was then optimized and characterized for particle fabrication, drug release, and targeting against cancer cells. The HA-CS particle size was 210 nm and its zeta potential was +25 mv. The encapsulation efficiency of TMX in NPs was 55%. TMX released from the NPs in acidic pH (5-6) was higher than the physiological pH (7.4). The cytotoxic effect of TMX-loaded HA-CS NPs on MCF7 and TMX-resistant MCF7 cells was significantly higher than TMX-loaded CS NPs and free drug. The findings confirmed the significant suppressive impact of TMX-loaded HA-CS NPs on MCF7 and TMX-resistant MCF7 cancer cells compared to the TMX-loaded CS NPs and free TMX. Graphical abstract.

Nano Spray-Dried Drugs for Oral Administration: A Review

Spray drying is an important technology that is fast, simple, reproducible, and scalable. It has a wide application range, that is, in food, chemicals, and encapsulation of pharmaceuticals. The technology can be divided into conventional spray drying and nano spray drying. The key advantage of nano spray drying is the production of drug-loaded nanosized particles for various drug delivery applications. The recent developments in nano spray dryer technology and the market launch of the Nano Spray Dryer B-90 by Büchi Labortechnik AG in 2009 enabled the production of submicron spray-dried particles. This review focuses on nanosized drug delivery systems intended for oral administration produced by nano spray drying. First, the nano spray drying concept, the basic technologies implemented in the equipment, and the effects of the various process parameters on the final dry submicron powder properties are presented. Then, the topics of new formulation strategies of oral drugs are highlighted with examples that have entered the research literature in recent years. Next, the subjects of direct conversion of poorly water-soluble drugs, encapsulation of drugs, and drying of preformed nanoparticles are considered. Finally, topics such as morphology, particle size, size distribution, surface analysis, bioavailability, drug release, release kinetics, and solid-state characterization (by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, nuclear magnetic resonance) of oral drug delivery systems produced by nano spray drying are discussed. The review attempts to provide a comprehensive knowledge base with current literature and foresight to researchers working in the field of pharmaceutical technology and nanotechnology and especially in the field of nano spray drying.

Evaluating the Anticarcinogenic Activity of Surface Modified/Functionalized Nanochitosan: The Emerging Trends and Endeavors

Chitosan begins its humble journey from marine food shell wastes and ends up as a versatile nutraceutical. This review focuses on briefly discussing the antioxidant activity of chitosan and retrospecting the accomplishments of chitosan nanoparticles as an anticarcinogen. The various modified/functionalized/encapsulated chitosan nanoparticles and nanoforms have been listed and their biomedical deliverables presented. The anticancer accomplishments of chitosan and its modified composites have been reviewed and presented. The future of surface modified chitosan and the lacunae in the current research focus have been discussed as future perspective. This review puts forth the urge to expand the scientific curiosity towards attempting a variety of functionalization and surface modifications to chitosan. There are few well known modifications and functionalization that benefit biomedical applications that have been proven for other systems. Being a biodegradable, biocompatible polymer, chitosan-based nanomaterials are an attractive option for medical applications. Therefore, maximizing expansion of its bioactive properties are explored. The need for applying the ideal functionalization that will significantly promote the anticancer contributions of chitosan nanomaterials has also been stressed.

Mucoadhesive and mucopenetrating chitosan nanoparticles for glycopeptide antibiotic administration

The use of nanoparticles (NPs) represents a useful strategy for peptide antibiotic delivery to mucosal membranes by either prolonging drug residence time at the target site (mucoadhesive NPs) or by enhancing diffusion across mucus layer to reach the underlying epithelium (mucopenetrating NPs). The purpose of this study was to design chitosan (CH) NPs and to evaluate their employment as mucoadhesive and/or mucopenetrating systems for vancomycin (VM) delivery. NPs were prepared by ionic gelation of CH with sodium carboxymethylcellulose (CMC), sodium alginate (ALG), sodium tripolyphosphate (TPP) or phytic acid (PA) and characterized in terms of size, zeta-potential, morphology, drug encapsulation efficiency, mucoadhesion and mucopenetrating ability. Moreover, in vitro tests were conducted to evaluate VM release and the antibacterial activity against Staphylococcus aureus and Bacillus subtilis. NPs showed sizes ranged from 150 nm to 350 nm with good polydispersity index and positive zeta-potential. The selection of the suitable crosslinker allowed to modulate the mucoadhesive/mucopenetrating properties: CH/TPP NPs showed the best mucoadhesive ability, while CH/PA and CH/CMC NPs were characterized by an improved diffusion across the mucus layer. Further, NPs allowed a fast and complete release of VM, maintaining the antibacterial activity against the tested bacteria species.

Development of Spanish Broom and Flax Dressings with Glycyrrhetinic Acid-Loaded Films for Wound Healing: Characterization and Evaluation of Biological Properties

The selection of an appropriate dressing for each type of wound is a very important procedure for a faster and more accurate healing process. So, the aim of this study was to develop innovative Spanish Broom and flax wound dressings, as alternatives to cotton used as control, with polymeric films containing glycyrrhetinic acid (GA) to promote wound-exudate absorption and the healing process. The different wound dressings were prepared by a solvent casting method, and characterized in terms of drug loading, water uptake, and in vitro release. Moreover, biological studies were performed to evaluate their biocompatibility and wound-healing efficacy. Comparing the developed wound dressings, Spanish Broom dressings with GA-loaded sodium hyaluronate film had the best functional properties, in terms of hydration ability and GA release. Moreover, they showed a good biocompatibility, determining a moderate induction of cell proliferation and no cytotoxicity. In addition, the wound-healing test revealed that the Spanish Broom dressings promoted cell migration, further facilitating the closure of the wound.

Green Synthesized Chitosan/Chitosan Nanoforms/Nanocomposites for Drug Delivery Applications

Chitosan has become a highlighted polymer, gaining paramount importance and research attention. The fact that this valuable polymer can be extracted from food industry-generated shell waste gives it immense value. Chitosan, owing to its biological and physicochemical properties, has become an attractive option for biomedical applications. This review briefly runs through the various methods involved in the preparation of chitosan and chitosan nanoforms. For the first time, we consolidate the available scattered reports on the various attempts towards greens synthesis of chitosan, chitosan nanomaterials, and chitosan nanocomposites. The drug delivery applications of chitosan and its nanoforms have been reviewed. This review points to the lack of systematic research in the area of green synthesis of chitosan. Researchers have been concentrating more on recovering chitosan from marine shell waste through chemical and synthetic processes that generate toxic wastes, rather than working on eco-friendly green processes-this is projected in this review. This review draws the attention of researchers to turn to novel and innovative green processes. More so, there are scarce reports on the application of green synthesized chitosan nanoforms and nanocomposites towards drug delivery applications. This is another area that deserves research focus. These have been speculated and highlighted as future perspectives in this review.

Production and isolation of pharmaceutical drug nanoparticles

Nanosizing of pharmaceutical drug particles is one of the most important drug delivery platforms approaches for the commercial development of poorly water-soluble drug molecules. Though nanosizing of drug particles has been proven to greatly enhance drugs dissolution rate and apparent solubility, nanosized materials have presented significant challenges for their formulation as solid dosage forms (e.g. tablets, capsules). This is due to the strong Van der Waals attraction forces between dry nanoparticles leading to aggregation, cohesion, and consequently poor flowability. In this review, the broad area of nanomedicines is overviewed with the primary focus on drug nanocrystals and the top-down and bottom-up methods used in their fabrication. The review also looks at how nanosuspensions of pharmaceutical drugs are generated and stabilised, followed by subsequent strategies for isolation of the nanoparticles. A perspective on the future outlook for drug nanocrystals is also presented.

Preparation and evaluation of vancomycin spray-dried powders for pulmonary delivery

The aim of the current study was to achieve a dry powder formulation of vancomycin by spray drying whilst evaluating the effect of pH and excipient type and percentage used in formulation on particle characteristics and aerosolization performance. A D-optimal design was applied to optimize the formulation comprising vancomycin and two main excipient groups; a carbohydrate bulking agent (lactose, mannitol or trehalose) and a second excipient (hydroxypropyl beta-cyclodextrin or L-leucine) at pH 4 and 7. The physicochemical properties of particles (size, morphology, crystallinity state, residual moisture content), stability, and aerosolization characteristics were investigated. Using the combination of two excipients increased the fine particle fraction of powder emitted from an Aerolizer^® device at a flow rate of 60 L/min. Hydroxypropyl beta-cyclodextrin showed more potential than L-leucine in aerosolization capabilities. Stability studies over 3 months of storage in 40 °C and 75% relative humidity suggested a good physical stability of the optimized formulation containing 17.39% hydroxypropyl beta-cyclodextrin along with 29.61% trehalose relative to the amount of drug at pH 4. Use of two excipients including trehalose and hydroxypropyl beta-cyclodextrin with a total weight ratio of 47% relative to the amount of drug is appropriate for the preparation of vancomycin dry powder formulation for inhalation.

Nanomedicine-based antimicrobial peptide delivery for bacterial infections: recent advances and future prospects

Background

Antimicrobial peptides (AMPs) have gained wide interest as viable alternatives to antibiotics owing to their potent antimicrobial effects and the low propensity of resistance development. However, their physicochemical properties (solubility, charge, hydrophobicity/hydrophilicity), stability issues (proteolytic or enzymatic degradation, aggregation, chemical degradation), and toxicities (interactions with blood components or cellular toxicities) limit their therapeutic applications.

Area covered

Nanomedicine-based therapeutic delivery is an emerging concept. The AMP loaded nanoparticles have been prepared and investigated for their antimicrobial effects. In this review, we will discuss different nanomedicine-based AMP delivery systems including metallic nanoparticles, lipid nanoparticles, polymeric nanoparticles, and their hybrid systems along with their future prospects for potent antimicrobial efficacy.

Expert opinion

Nanomedicine-based AMP delivery is a recent approach to the treatment of bacterial infections. The advantageous properties of nanoparticles including the enhancement of AMP stability, controlled release, and targetability make them suitable for the augmentation of AMP activity. Modifications in the nanomedicine-based approach are required to overcome the problems of nanoparticle instability, shorter residence time, and toxicity. Future rigorous studies for both the AMP loaded nanoparticle preparation and characterization, and detailed evaluations of their in vitro and in vivo antimicrobial effects and toxicities, are essential.

Lactobacillus crispatus BC1 Biosurfactant Delivered by Hyalurosomes: An Advanced Strategy to Counteract Candida Biofilm

The emergence of resistance to antifungal drugs has made the treatment of vulvovaginal candidiasis (VVC) very challenging. Among natural substances, biosurfactants (BS) produced by Lactobacillus have gained increasing interest in counteracting Candida infections for their proven anti-adhesive properties and safety profile. In the present study, liposomes (LP-BS) or liposomes coated with hyaluronic acid (HY-LP-BS) were prepared in the presence of the BS isolated from the vaginal strain Lactobacillus crispatus BC1 and characterized in terms of size, ζ potential, stability and mucoadhesion. The anti-biofilm activity of free BS, LP-BS and HY-LP-BS was investigated against different Candida albicans and non-albicans strains (C. glabrata, C. lusitaniae, C. tropicalis, C. krusei and C. parapsilosis), clinically isolated from patients affected by VVC. The inhibition of biofilm formation and the dispersal of pre-formed biofilm were evaluated. The obtained phospholipid vesicles showed suitable size for vaginal application and good stability over the storage period. HY-LP-BS exhibited good mucoadhesive properties and the best anti-biofilm profile, both in preventing or limiting the surface colonization by a broad spectrum of Candida species. In conclusion, the formulation of a novel antifungal agent derived from the vaginal microbiota into mucoadhesive nanocarriers appears to be a promising biotherapeutic strategy to counteract vulvovaginal candidiasis.

Development and Optimization of Inhalable Levofloxacin Nanoparticles for The Treatment of Tuberculosis

BACKGROUND

Levofloxacin has been recommended by the WHO for the treatment of pulmonary tuberculosis and inhalable delivery of levofloxacin can be advantageous over conventional delivery.

OBJECTIVE

This study aimed to develop and optimize inhalable levofloxacin Loaded Chitosan Nanoparticles (LCN). The objective was to achieve the mean particle size of LCN less than 300nm, sustain the drug release up to 24 h, and achieve MMAD of LCN of less than 5μm.

METHODS

LCN were prepared by ionic gelation of chitosan with sodium tripolyphosphate (STPP) and subsequent lyophilization. A Plackett Burman screening design, 32 full factorial design, and overlay plots were sequentially employed to optimize the formulation. The mean particle size, % entrapment efficiency, in vitro drug release, and minimum inhibitory concentration were all evaluated.

RESULTS

The Pareto chart from the Placket Burman screening design revealed that the concentrations of chitosan and STPP was found to be significant (p < 0.05). Further analysis by 32 full factorial design revealed that F-ratio for each model generated was found to be greater than the theoretical value (p < 0.05), confirming the significance of each model.

CONCLUSION

The optimized formulation showed a mean particle size of 171.5 nm, sustained the drug release up to 24 h in simulated lung fluid, and revealed MMAD of 3.18 μm, which can confirm delivery of the drug to the deep lung region. However, further in vivo studies are required to design a suitable dosage regimen and establish the fate of nanoparticles for safe and efficacious delivery of the drug.

Polysaccharide nanoparticles for oral controlled drug delivery: the role of drug-polymer and interpolymer interactions

Introduction: The oral route still represents the most popular way of administering drugs; nowadays oral administration faces new challenges, in particular with regards to the delivery of APIs that are poorly absorbed and sensitive to degradation such as macromolecules and biotechnological drugs. Nanoparticles are promising tools for the efficient delivery of these drugs to the gastrointestinal tract. Areas covered:Approaches and techniques for the formulation of drugs, with particular focus on the preparation of polysaccharide nanoparticles obtained by non-covalent interactions. Expert opinion:Polysaccharide-based nanoparticulate systems offer the opportunity to address some of the issues posed by biotechnological drugs, as well as by small molecules, with problems of stability/intestinal absorption, by exploiting the capability of the polymer to establish non-covalent bonds with functional groups in the chemical structure of the API. This area of research will continue to grow, provided that these drug delivery technologies will efficaciously be translated into systems that can be manufactured on a large scale under GMP conditions. Industrial scale-up represents the biggest obstacle to overcome in view of the transformation of very promising results obtained on lab scale into medicinal products. To do that, an effort toward the simplification of the process and technologies is necessary.

Novel lipid-polymer hybrid nanoparticles incorporated in thermosensitive in situ gel for intranasal delivery of terbutaline sulphate

AIM

The present work aimed to improve the bioavailability of terbutaline sulphate (TS) and to prolong its nasal residence time for the treatment of asthma.

METHODS

Chitosan/pectin polyelectrolyte complex nanoparticles (CS/PC) were prepared by ionic gelation method and coated with phospholipid (PL) and then incorporated into optimised thermosensitive in situ gel.

RESULTS

The optimal PL-coated nanoparticle formulation (LP1) showed the smallest particle size (345.5 nm), the highest zeta potential (32.9 mV) and the greatest percent drug released after 6 h (71%). The optimum in situ gel loaded with LP1 (NG3) showed three times greater permeation through nasal mucosa than aqueous solution of TS and revealed about 94% and 92% of the effect of IV injection of drug solution on tidal volume and peak expiratory flow in histamine treated rats, respectively.

CONCLUSION

The developed PL-coated CS/PC/in situ gel could be considered as a promising intranasal formulation of TS for asthma management.

Vancomycin-loaded nanoparticles against vancomycin intermediate and methicillin resistant Staphylococcus aureus strains

Bacterial infections represent one of the leading causes of mortality in the world. Among causative pathogens, S. aureus is prominently known as the underlying cause of many multidrug resistant infections that are often treated with the first-line choice antibiotic vancomycin (VCM). Loading antibiotics into polymeric nanoparticles (Np) displays promise as an alternative method to deliver therapy due to the greater access and accumulation of the antibiotic at the site of the infection as well as reducing toxicity, irritation and degradation. The aim of this work was to prepare, characterize and evaluate VCM-loaded nanoparticles (VNp) for use against S. aureus strains. Moreover, conjugation of Nps with holo-transferrin (h-Tf) was investigated as an approach for improving targeted drug delivery. VNp were prepared by double emulsion solvent evaporation method using PLGA and PVA or DMAB as surfactants. The particles were characterized for size distribution, Zeta Potential, morphology by transmission electron microscopy, encapsulation yield and protein conjugation efficiency. Process yield and drug loading were also investigated along with an in vitro evaluation of VNp antimicrobial effects against S. aureus strains. Results showed that Np were spontaneously formed with a mean diameter lower than 300 nm in a narrow size distribution that presented a spherical shape. The bioconjugation with h-Tf did not appear to increase the antimicrobial effect of VNp. However, non-bioconjugated Np presented a minimal inhibitory concentration lower than free VCM against a MRSA (Methicillin-resistant S. aureus) strain, and slightly higher against a VISA (VCM intermediate S. aureus) strain. VNp without h-Tf showed potential to assist in the development of new therapies against S. aureus infections.

Drug-delivery Ca-Mg silicate scaffolds encapsulated in PLGA

The aim of this work is to develop dual-functional scaffolds for bone tissue regeneration and local antibiotic delivery applications. In this respect, bioresorbable bredigite (Ca₇MgSi₄O₁₆) porous scaffolds were fabricated by a foam replica method, loaded with vancomycin hydrochloride and encapsulated in poly lactic-co-glycolic acid (PLGA) coatings. Field emission scanning electron microscopy, Archimedes porosimetry and Fourier-transform infrared spectroscopy were used to characterize the structure of the scaffolds. The drug delivery kinetics and cytocompatibility of the prepared scaffolds were also studied in vitro. The bare sample exhibited a burst release of vancomycin and low biocompatibility with respect to dental pulp stem cells based on the MTT assay due to the fast bioresorption of bredigite. While keeping the desirable characteristics of pores for tissue engineering, the biodegradable PLGA coatings modified the drug release kinetics, buffered physiological pH and hence improved the cell viability of the vancomycin-loaded scaffolds considerably.

Biosurfactant from vaginal Lactobacillus crispatus BC1 as a promising agent to interfere with Candida adhesion

BACKGROUND

Lactobacillus spp. dominating the vaginal microbiota of healthy women contribute to the prevention of urogenital and sexually transmitted infections. Their protective role in the vagina can be mediated by Lactobacillus cells themselves, metabolites or bacterial components, able to interfere with pathogen adhesion and infectivity. Vulvovaginal candidiasis (VVC) is a common genital infection, caused by the overgrowth of opportunistic Candida spp. including C. albicans, C. glabrata, C. krusei and C. tropicalis. Azole antifungal drugs are not always efficient in resolving VVC and preventing recurrent infections, thus alternative anti-Candida agents based on vaginal probiotics have gained more importance. The present work aims to chemically characterize the biosurfactant (BS) isolated from a vaginal Lactobacillus crispatus strain, L. crispatus BC1, and to investigate its safety and antiadhesive/antimicrobial activity against Candida spp., employing in vitro and in vivo assays.

RESULTS

BS isolated from vaginal L. crispatus BC1 was characterised as non-homogeneous lipopeptide molecules with a critical micellar concentration value of 2 mg/mL, and good emulsification and mucoadhesive properties. At 1.25 mg/mL, the BS was not cytotoxic and reduced Candida strains' ability to adhere to human cervical epithelial cells, mainly by exclusion mechanism. Moreover, intravaginal (i.va.) inoculation of BS in a murine experimental model was safe and did not perturb vaginal cytology, histology and cultivable vaginal microbiota. In the case of i.va. challenge of mice with C. albicans, BS was able to reduce leukocyte influx.

CONCLUSIONS

These results indicate that BS from vaginal L. crispatus BC1 is able to interfere with Candida adhesion in vitro and in vivo, and suggest its potential as a preventive agent to reduce mucosal damage occasioned by Candida during VVC.

Chitosan-capped enzyme-responsive hollow mesoporous silica nanoplatforms for colon-specific drug delivery

An enzyme-responsive colon-specific delivery system was developed based on hollow mesoporous silica spheres (HMSS) to which biodegradable chitosan (CS) was attached via cleavable azo bonds (HMSS-N=N-CS). Doxorubicin (DOX) was encapsulated in a noncrystalline state in the hollow cavity and mesopores of HMSS with the high loading amount of 35.2%. In vitro drug release proved that HMSS-N=N-CS/DOX performed enzyme-responsive drug release. The grafted CS could increase the biocompatibility and stability and reduce the protein adsorption on HMSS. Gastrointestinal mucosa irritation and cell cytotoxicity results indicated the good biocompatibility of HMSS and HMSS-N=N-CS. Cellular uptake results indicated that the uptake of DOX was obviously increased after HMSS-N=N-CS/DOX was preincubated with a colonic enzyme mixture. HMSS-N=N-CS/DOX incubated with colon enzymes showed increased cytotoxicity, and its IC₅₀ value was three times lower than that of HMSS-N=N-CS/DOX group without colon enzymes. The present work lays the foundation for subsequent research on mesoporous carriers for oral colon-specific drug delivery.

Nanomedicines for the Delivery of Antimicrobial Peptides (AMPs)

Microbial infections are still among the major public health concerns since several yeasts and fungi, and other pathogenic microorganisms, are responsible for continuous growth of infections and drug resistance against bacteria. Antimicrobial resistance rate is fostering the need to develop new strategies against drug-resistant superbugs. Antimicrobial peptides (AMPs) are small peptide-based molecules of 5–100 amino acids in length, with potent and broad-spectrum antimicrobial properties. They are part of the innate immune system, which can represent a minimal risk of resistance development. These characteristics contribute to the description of these molecules as promising new molecules in the development of new antimicrobial drugs. However, efforts in developing new medicines have not resulted in any decrease of drug resistance yet. Thus, a technological approach on improving existing drugs is gaining special interest. Nanomedicine provides easy access to innovative carriers, which ultimately enable the design and development of targeted delivery systems of the most efficient drugs with increased efficacy and reduced toxicity. Based on performance, successful experiments, and considerable market prospects, nanotechnology will undoubtedly lead a breakthrough in biomedical field also for infectious diseases, as there are several nanotechnological approaches that exhibit important roles in restoring antibiotic activity against resistant bacteria.

How the Lack of Chitosan Characterization Precludes Implementation of the Safe-by-Design Concept

Efficacy and safety of nanomedicines based on polymeric (bio)materials will benefit from a rational implementation of a Safe-by-Design (SbD) approach throughout their development. In order to achieve this goal, however, a standardization of preparation and characterization methods and their accurate reporting is needed. Focusing on the example of chitosan, a biopolymer derived from chitin and frequently used in drug and vaccine delivery vector preparation, this review discusses the challenges still to be met and overcome prior to a successful implementation of the SbD approach to the preparation of chitosan-based protein drug delivery systems.

Chitosan-based Colloidal Polyelectrolyte Complexes for Drug Delivery: A Review

Polyelectrolyte complexes (PECs) as safe drug delivery carriers, are spontaneously formed by mixing the oppositely charged polyelectrolyte solutions in water without using organic solvents nor chemical cross-linker or surfactant. Intensifying attentions on the PECs study are aroused in academia and industry since the fabrication process of PECs is mild and they are ideal vectors for the delivery of susceptible drugs and macromolecules. Chitosan as the unique natural cationic polysaccharide, is a good bioadhesive material. Besides, due to its excellent biocompatibility, biodegradability, abundant availability and hydrophilic nature, chitosan-based PECs have been extensively applied for drug delivery, particularly after administration through mucosal and parenteral routes. The purpose of this review is to compile the recent advances on the biomedical applications of chitosan-based PECs, with specific focuses on the mucosal delivery, cancer therapy, gene delivery and anti-HIV therapy. The challenges and the perspectives of the chitosan-based PECs are briefly commented as well.

Ionotropic Gelation Synthesis of Chitosan-Alginate Nanodisks for Delivery System and In Vitro Assessment of Prostate Cancer Cytotoxicity

We report on the synthesis of chitosan-alginate nanodisks (Cs-Al NDs) using a simple approach consisting of the ionotropic gelation method. Sodium tripolyphosphate (STPP) was used as crosslinking agent to promote the electrostatic interaction between amine groups the chitosan and hydroxyl and carboxyl groups of alginate. Scanning electron microscopy (SEM) images provided direct evidence of the morphology of the nanodisks where agglomeration was observed due to the electrostatic interaction between the functional groups. Furthermore, dynamic light scattering (DLS) showed that the hydrodynamic size of the Cs-Al NDs was 227 nm and 152 nm in pH 1.2 and pH 7.4, respectively, which is in agreement with the information observed in the SEM images. The chemical structure is presented mainly the amine and carboxyl groups due to the presence of chitosan and alginate in the nanodisks, respectively, which allow the electrostatic interaction through N-H linkages. According to the X-ray diffraction, we found that the Cs-Al NDs exhibited the typical structure of chitosan and alginate, which lead the formation of polyelectrolyte complexes. We also evaluated the encapsulation of amoxicillin in the nanodisk, obtaining a loading efficiency of 74.98%, as well as a maximum in vitro release amount of 63.2 and 52.3% at pH 1.2 and 7.4, respectively. Finally, the cytotoxicity effect of the Cs-Al nanodisks was performed in human prostatic epithelial PWR-1E and Caucasian prostate adenocarcinoma PC-3 cell lines, in which the cell viability was above 80% indicating low inhibition and determining the Cs-Al NDs as a promising technology for controlled delivery systems.

Chitosan microparticles improve tomato seedling biomass and modulate hormonal, redox and defense pathways

Agrobiotechnology challenges involve the generation of new sustainable bioactives with emerging properties as plant biostimulants with reduced environment impact. We analyzed the potential use of recently developed chitosan microparticles (CS-MP) as growth promoters of tomato which constitutes one of the most consumed vegetable crops worldwide. Treatments of tomato seeds with CS-MP improved germination and vigor index. In addition, CS-MP sustained application triggered an improvement in root and shoot biomass reinforcing tomato performance before transplanting. The level of reactive oxygen species (ROS), antioxidant enzyme activities and defense protein markers were modulated by CS-MP treatment in tomato plantlets. Analyses of ARR5:GUS and DR5:GUS transgenic reporter tomato lines highlighted the participation of cytokinin and auxin signaling pathways during tomato root promotion mediated by CS-MP. Our findings claim a high commercial potential of CS-MP to be incorporated as a sustainable input for tomato production.

Guar gum modified upconversion nanocomposites for colorectal cancer treatment through enzyme-responsive drug release and NIR-triggered photodynamic therapy

Multimodal therapeutic approach towards colorectal cancer (CRC) holds great promise. There is, however, no convincing strategy reported to date that employs a multimodal strategy in CRC treatment. The present study reports an intense green-emitting core-shell photoluminescent upconversion (CSGU) nanocrystal engineered to synergistically perform photodynamic and enzyme-triggered delivery of the chemotherapeutic agent for an enhanced therapeutic outcome on HT-29 colon carcinoma cells in vitro. The photodynamic activity is achieved by the energy transfer between CSGU and the chemically conjugated Rose Bengal (RB) molecules that are further protected by a mesoporous silica (MS) layer. The chemical assay demonstrates a remarkable FRET mediated generation of ¹O₂ under NIR (980 nm) excitation. The outermost MS layer of the nanoplatform is utilized for the loading of the 5FU anticancer drug, which is further capped with a guar gum (GG) polysaccharide polymer. The release of the 5FU is specifically triggered by the degradation of the GG cap by specific enzymes secreted from colonic microflora, which otherwise showed 'zero-release behavior' in the absence of any enzymatic trigger in various simulated gastro-intestinal (GI) conditions. Furthermore, the enhanced therapeutic efficacy of the nanoplatform (CSGUR-MSGG/5FU) was evaluated through in vitro studies using HT-29 CRC cell lines by various biochemical and microscopic assays by the simultaneous triggering effect of colonic enzyme and 980 nm laser excitation. In addition, the strong visible emission from the nanoplatform has been utilized for NIR-induced cellular bioimaging.

Chitosan-Based Drug Delivery Systems for Optimization of Photodynamic Therapy: a Review

Drug delivery systems (DDS) can be designed to enrich the pharmacological and therapeutic properties of several drugs. Many of the initial obstacles that impeded the clinical applications of conventional DDS have been overcome with nanotechnology-based DDS, especially those formed by chitosan (CS). CS is a linear polysaccharide obtained by the deacetylation of chitin, which has potential properties such as biocompatibility, hydrophilicity, biodegradability, non-toxicity, high bioavailability, simplicity of modification, aqueous solubility, and excellent chemical resistance. Furthermore, CS can prepare several DDS as films, gels, nanoparticles, and microparticles to improve delivery of drugs, such as photosensitizers (PS). Thus, CS-based DDS are broadly investigated for photodynamic therapy (PDT) of cancer and fungal and bacterial diseases. In PDT, a PS is activated by light of a specific wavelength, which provokes selective damage to the target tissue and its surrounding vasculature, but most PS have low water solubility and cutaneous photosensitivity impairing the clinical use of PDT. Based on this, the application of nanotechnology using chitosan-based DDS in PDT may offer great possibilities in the treatment of diseases. Therefore, this review presents numerous applications of chitosan-based DDS in order to improve the PDT for cancer and fungal and bacterial diseases.

Enhanced Properties of Chitosan Microparticles over Bulk Chitosan on the Modulation of the Auxin Signaling Pathway with Beneficial Impacts on Root Architecture in Plants

Improving the root system architecture (RSA) under adverse environmental conditions by using biostimulants is emerging as a new way to boost crop productivity. Recently, we have reported the characterization of novel chitosan-based microparticles (CS-MPs) with promising biological properties as rooting agents in lettuce. In this work, we demonstrated that in contrast to bulk chitosan (CS), which exerts root growth inhibition, CS-MPs promoted root growth and development from 1 to 10 μg mL-1 without cytotoxicity effects at higher doses in Arabidopsis and lettuce seedlings. In addition, we studied the mechanistic mode of action of CS-MPs in the development of early RSA in the Arabidopsis model. CS-MPs unchained accurate and sustained spatio-temporal activation of the nuclear auxin signaling pathway. Our findings validated a promising scenario for the application of CS-MPs in the modulation of RSA to respond to changing soil environments and improve crop performance.