In vitro skin models as a tool in optimization of drug formulation

Nitric Oxide-Releasing Topical Treatments for Cutaneous Melanoma

Melanoma is an aggressive skin cancer notorious for high levels of drug resistance. Additionally, current treatments such as immunotherapies are often associated with numerous adverse side effects. The use of nitric oxide (NO) may represent an attractive treatment for melanoma due to NO's various anticancer properties, unlikeliness to foster resistance, and limited toxicity toward healthy tissues. The anticancer effects of chemical NO donors have been explored previously but with limited understanding of the needed characteristics for exerting optimal antimelanoma activity. Herein, the in vitro therapeutic efficacy of three macromolecular NO donor systems (i.e., cyclodextrin, mesoporous silica nanoparticles, and hyaluronic acid) with tunable NO-release kinetics was explored by evaluating skin permeation along with toxicity against melanoma and healthy skin cells. Cytotoxicity against melanoma cells was dependent on NO payload and not donor identity or NO-release kinetics. In contrast, cytotoxicity against healthy cells was primarily influenced by the macromolecular NO donor, with cyclodextrin- and hyaluronic acid-based NO donors having the highest therapeutic indices. In vitro skin permeation was influenced by both the size and charge of the NO donor, with smaller, more neutral donors resulting in greater permeation. A Pluronic F127 organogel was optimized for the delivery of a cyclodextrin-based NO donor. Delivery of the NO donor in this manner resulted in increased in vitro skin permeation and reduced tumor growth in an in vivo model.

The Design Features, Quality by Design Approach, Characterization, Therapeutic Applications, and Clinical Considerations of Transdermal Drug Delivery Systems-A Comprehensive Review

Transdermal drug delivery systems (TDDSs) are designed to administer a consistent and effective dose of an active pharmaceutical ingredient (API) through the patient's skin. These pharmaceutical preparations are self-contained, discrete dosage forms designed to be placed topically on intact skin to release the active component at a controlled rate by penetrating the skin barriers. The API provides the continuous and prolonged administration of a substance at a consistent rate. TDDSs, or transdermal drug delivery systems, have gained significant attention as a non-invasive method of administering APIs to vulnerable patient populations, such as pediatric and geriatric patients. This approach is considered easy to administer and helps overcome the bioavailability issues associated with conventional drug delivery, which can be hindered by poor absorption and metabolism. A TDDS has various advantages compared to conventional methods of drug administration. It is less intrusive, more patient-friendly, and can circumvent first pass metabolism, as well as the corrosive acidic environment of the stomach, that happens when drugs are taken orally. Various approaches have been developed to enhance the transdermal permeability of different medicinal compounds. Recent improvements in TDDSs have enabled the accurate administration of APIs to their target sites by enhancing their penetration through the stratum corneum (SC), hence boosting the bioavailability of drugs throughout the body. Popular physical penetration augmentation methods covered in this review article include thermophoresis, iontophoresis, magnetophoresis, sonophoresis, needle-free injections, and microneedles. This review seeks to provide a concise overview of several methods employed in the production of TDDSs, as well as their evaluation, therapeutic uses, clinical considerations, and the current advancements intended to enhance the transdermal administration of drugs. These advancements have resulted in the development of intelligent, biodegradable, and highly efficient TDDSs.

Characterization of Reconstructed Human Epidermis in a Chemically-Defined, Animal Origin-Free Cell Culture

The Reconstructed Human Epidermis (RHE) model derived from epidermal keratinocytes offers an ethical and scientific alternative to animal experimentation, particularly in cutaneous toxicology and dermatological research, where the elimination of animal cruelty is of paramount importance. Thus, we compared commercially available chemically defined animal origin-free (cdAOF) supplements, designed for regenerative medicine, to the widely utilized supplement (human keratinocyte growth supplement), which contains growth factors and bovine pituitary extract. Herein we present the extended characterization of RHE derived from newborn, adult, and immortalized N/telomerase reverse transcriptase keratinocytes under cdAOF conditions. Culture of RHE in the cdAOF media produced histological features that were similar to that produced using human keratinocyte growth supplement, with the exception that the basal keratinocytes were less cylindrical. Additionally, immunolocalization of involucrin in the basal layer and increased mRNA expression of several inflammatory-proliferative markers were observed under cdAOF conditions. In RHEs cultured in cdAOF media, expression and immunolocalization of other expected markers of keratinization were similar, while monitoring of barrier function (transepithelial electrical resistance) revealed results that were statistically equal to, or lower than those observed in RHE cultured in human keratinocyte growth supplement. Our study indicates that reconstruction of RHE was accomplished under cdAOF culture conditions and that further refinement could promote an expanded use beyond regenerative medicine, for in vitro toxicology applications.

Transdermal characteristic study of bovine sialoglycoproteins with anti-skin aging and accelerating skin wound healing

BACKGROUND

Sialoglycoproteins play important roles in various biological processes, including cell adhesion, immune response, and cell signaling. Our previous studies indicated that the bovine sialoglycoproteins could be developed as a reagent against skin aging and as a new candidate for accelerating skin wound healing as well as inhibiting scar formation. However, transdermal characteristic of the bovine sialoglycoproteins is still unknown.

AIMS

This study investigated the transdermal permeation of the bovine sialoglycoproteins through porcine skin using the Franz diffusion cell method.

RESULTS

Our study showed that the bovine sialoglycoproteins could penetrate through the porcine skin with a linear permeation pattern described by the regression equation N% = 11.49 t-3.858, with a high coefficient of determination (R2 = 0.9903). The histochemical results demonstrated the widespread distribution of the bovine sialoglycoproteins between the epidermal and dermal layers, which suggesting parts of the bovine sialoglycoproteins had ability to traverse the epidermal barrier. The results of the lectin microarrays indicated highly enriched glycopatterns on the bovine sialoglycoproteins, which also appeared in permeated porcine skin. The LC-MS/MS analysis further showed that the bovine sialoglycoproteins were composed of approximately 100 proteins with molecular weight ranging from 748.4 kDa to 10 kDa, and there were 23 specific bovine sialoglycoproteins with molecular weight ranging from 69.2 kDa to 10 kDa to be characterized in permeated porcine skin.

CONCLUSIONS

Parts of the bovine sialoglycoproteins with molecular weight less than 69.2 kDa had ability to traverse the epidermal barrier. Understanding the permeation characteristics of the bovine sialoglycoproteins for developing innovative formulations with therapeutic benefits, contributing to advancements in cosmetic and dermatological fields.

Discussion of EMA Draft Guideline on Quality and Equivalence of Topical Products Based on Comparison of Approved Mometasone Furoate Drugs

INTRODUCTION

Today, the approval for a generic topical product includes the presentation of therapeutic equivalence to the originator based on clinical trials. To facilitate this procedure, in 2018 the European Medicines Agency (EMA) published a draft guideline on quality and equivalence of topical products, which includes request parameters regarding the quality of the newly developed generic product and test protocols for the implementation of equivalence tests regarding efficacy.

METHODS

To date, no data are available on the quality and evidence of the proposed test conditions. In this study, we performed an in vitro penetration test (IVPT) following the terms of the EMA draft guideline on two authorized topical products for which therapeutic equivalence was already proven during the approval process.

RESULTS

The complex biometric data processing revealed that in vitro equivalence could not be observed for all skin sections for either originator or generic product. Moreover, the necessity of the negative control proposed in the draft guideline is more than questionable. From the results presented, there were indications that a reduced number of skin donors would be sufficient to achieve statistically significant equivalence in the comparison of all applied formulations. Here, n = 7 donors was proposed instead of n ≥ 12 as the EMA draft guideline demands, decreasing the degree of biodiversity simultaneously. Moreover, a higher number of independent replicates (n > 2) was proposed for proper statistics.

CONCLUSION

This bioequivalence study shows insufficient parameters, which should be discussed together with the EMA draft guideline.

Anti-Nociceptive Effect of Sufentanil Polymeric Dissolving Microneedle on Male Mice by Hot Plate Technique

Background

Despite the widespread use of opioids to manage severe pain, its systemic administration results in side effects. Among the subcutaneous and transdermal drug delivery systems developed to deal with adverse effects, microneedles have drawn attention due to their rapid action, high drug bioavailability, and improved permeability. Sufentanil (SUF) is an effective injectable opioid for treating severe pain. In this study, we investigated the analgesic effects of SUF using dissolvable microneedles.

Methods

SUF polymeric dissolvable microneedles were constructed through the mold casting method and characterized by SEM and FTIR analysis. Its mechanical strength was also investigated using a texture analyzer. Fluorescence microscopy was applied in vitro to measure the penetration depth of microneedle arrays. Irritation and microchannel closure time, drug release profile, and hemocompatibility test were conducted for the validation of microneedle efficiency. Hot plate test was also used to investigate the analgesic effect of microneedle in an animal model.

Results

Local administration of SUF via dissolving microneedles had an effective analgesic impact. One hour after administration, there was no significant difference between the subcutaneous and the microneedle groups, and the mechanical properties were within acceptable limits.

Conclusion

Microneedling is an effective strategy in immediate pain relief compared to the traditional methods.

Development of a novel human stratum corneum mimetic phospholipid -vesicle-based permeation assay models for in vitro permeation studies

OBJECTIVES

To develop and evaluate a novel human stratum corneum (SC) mimetic phospholipid vesicle-based permeation assay (PVPASC) model for in vitro permeation studies.

SIGNIFICANCE

Due to the increasing restrictions on the use of human and animal skins, artificial skin models have attracted substantial interest in pharmaceuticals and cosmetic industries. In this study, a modified PVPASC model containing both SC lipids and proteins was developed.

METHODS

The PVPASC model was optimized by altering the lipid composition and adding keratin in the formulation of large liposomes. The barrier properties were monitored by measuring the electrical resistance (ER) and permeability of Rhodamine B (RB). The modified PVPASC model was characterized in terms of the surface topography, solvent influence and storage stability. The permeation studies of the active components in Compound Nanxing Zhitong Plaster (CNZP) were performed to examine the capability of PVPASC in the application of skin penetration.

RESULTS

The ER and Papp values of RB obtained from the optimized PVPASC model indicated a similar barrier property to porcine ear skin. Scanning electron microscope analysis demonstrated a mimic 'brick-and-mortar' structure. The PVPASC model can be stored for three weeks at -20 °C, and withstand the presence of different receptor medium for 24 h. The permeation studies of the active components demonstrated a good correlation (r2 = 0.9136) of Papp values between the drugs' permeation through the PVPASC model and porcine ear skin.

CONCLUSION

Keratin contained composite phospholipid vesicle-based permeation assay models have been proven to be potential skin tools in topical/transdermal permeation studies.

Rational development of topical climbazole formulations

Dandruff, or pityriasis capitis simplex, is a common scalp condition associated with excessive flaking and scaling of the epidermal tissue. Other features include irregular corneocyte turnover, irritation, itching and an impaired skin barrier function. Previously we reported the characterization of climbazole (CBZ), an antifungal agent used in the management of dandruff. Skin permeation of CBZ from neat solvents was also investigated. In the present work we evaluated CBZ permeation in human skin in vitro from more complex formulations that better represent products used by consumers. The various systems studied were composed of propylene glycol (PG), Transcutol®P (TC), octyl salicylate (OSal) and isopropyl alcohol (IPA). As well as measurement of skin uptake and penetration of CBZ, where possible, the skin retention and permeation of the various solvents was also determined. All vehicles promoted skin permeation of CBZ but no significant differences in amount permeated were evident between the binary vehicles (PG:TC, TC:OSal) and the ternary vehicle studied (PG:IPA:OSal). The binary vehicles generally promoted more skin uptake of CBZ compared with the neat solvents (PG, TC, OSal) studied previously. Permeation and skin extraction of CBZ from the PG:TC vehicles increased with increasing PG content; a similar trend was evident for the PG:IPA:OSal systems. New methods were developed and validated for measurement of PG, TC and OSal. Analysis of the individual solvents indicated that PG permeation was also independent of the amounts of other solvents in the binary or ternary systems. Consistent with previous findings higher proportions of TC permeated compared with PG for the PG:TC binary systems; TC also permeated the skin more rapidly than PG from these vehicles. For OSal, skin extraction was generally higher for TC:OSal compared with the PG:IPA:OSal vehicle. However, increasing the content of OSal did not appear to influence CBZ skin uptake nor permeation. Interestingly, the effects of the various PG:TC vehicles on CBZ skin delivery contrast with results we previous reported for the same systems for a different active. This confirms that with reference to skin permeation, formulation effects and/or skin penetration enhancement should be expected to vary and may not be predicted for specific vehicles.

Model-Informed Drug Development: In Silico Assessment of Drug Bioperformance following Oral and Percutaneous Administration

The pharmaceutical industry has faced significant changes in recent years, primarily influenced by regulatory standards, market competition, and the need to accelerate drug development. Model-informed drug development (MIDD) leverages quantitative computational models to facilitate decision-making processes. This approach sheds light on the complex interplay between the influence of a drug's performance and the resulting clinical outcomes. This comprehensive review aims to explain the mechanisms that control the dissolution and/or release of drugs and their subsequent permeation through biological membranes. Furthermore, the importance of simulating these processes through a variety of in silico models is emphasized. Advanced compartmental absorption models provide an analytical framework to understand the kinetics of transit, dissolution, and absorption associated with orally administered drugs. In contrast, for topical and transdermal drug delivery systems, the prediction of drug permeation is predominantly based on quantitative structure-permeation relationships and molecular dynamics simulations. This review describes a variety of modeling strategies, ranging from mechanistic to empirical equations, and highlights the growing importance of state-of-the-art tools such as artificial intelligence, as well as advanced imaging and spectroscopic techniques.

Customizable Three-Dimensional Printed Earring Tap for Treating Affections Caused by Aesthetic Perforations

This work aimed to develop a three-dimensional (3D) wearable drug-loaded earring tap to treat affections caused by aesthetic perforations. The initial phase involved a combination of polymers to prepare filaments for fused deposition modeling (FDM) 3D printing using a centroid mixture design. Optimized filament compositions were used in the second phase to produce 3D printed earring taps containing the anti-inflammatory naringenin. Next, samples were assessed via physicochemical assays followed by in vitro skin permeation studies with porcine ear skin. Two filament compositions were selected for the study's second phase: one to accelerate drug release and another with slow drug dissolution. Both filaments demonstrated chemical compatibility and amorphous behavior. The use of the polymer blend to enhance printability has been confirmed by rheological analysis. The 3D devices facilitated naringenin skin penetration, improving drug recovery from the skin's most superficial layer (3D device A) or inner layers (3D device B). Furthermore, the devices significantly decreased transdermal drug delivery compared to the control containing the free drug. Thus, the resulting systems are promising for producing 3D printed earring taps with topical drug delivery and reinforcing the feasibility of patient-centered drug administration through wearable devices.

Methods for the characterisation of dermal uptake: Progress and perspectives for organophosphate esters

Organophosphate esters (OPEs) are a group of pollutants that are widely detected in the environment at high concentrations. They can adversely affect human health through multiple routes of exposure, including dermal uptake. Although attention has been paid to achieving an accurate and complete quantification of the dermal uptake of OPEs, existing evaluation methods and parameters have obvious weaknesses. This study reviewed two main categories of methodologies, namely the relative absorption (RA) model and the permeability coefficient (PC) model, which are widely used to assess the dermal uptake of OPEs. Although the PC model is more accurate and is increasingly used, the most important parameter in this model, the permeability coefficient (Kp), has been poorly characterised for OPEs, resulting in considerable errors in the estimation of the dermal uptake of OPEs. Thus, the detailed in vitro methods for the determination of Kp are summarised and sorted. Furthermore, the commonly used skin membranes are identified and the factors affecting Kp and corresponding mechanisms are discussed. In addition, the experimental conditions, conclusions, and available data on Kp values of the OPEs are thoroughly summarised. Finally, the corresponding knowledge gaps are proposed, and a more accurate and sophisticated experimental system and unknown Kp values for OPEs are suggested.

Development of Essential Oil-Loaded Polymeric Nanocapsules as Skin Delivery Systems: Biophysical Parameters and Dermatokinetics Ex Vivo Evaluation

Essential oils (EOs) are natural antioxidant alternatives that reduce skin damage. However, EOs are highly volatile; therefore, their nanoencapsulation represents a feasible alternative to increase their stability and favor their residence time on the skin to guarantee their effect. In this study, EOs of Rosmarinus officinalis and Lavandula dentata were nanoencapsulated and evaluated as skin delivery systems with potential antioxidant activity. The EOs were characterized and incorporated into polymeric nanocapsules (NC-EOs) using nanoprecipitation. The antioxidant activity was evaluated using the ferric thiocyanate method. The ex vivo effects on pig skin were evaluated based on biophysical parameters using bioengineering techniques. An ex vivo dermatokinetic evaluation on pig skin was performed using modified Franz cells and the tape-stripping technique. The results showed that the EOs had good antioxidant activity (>65%), which was maintained after nanoencapsulation and purification. The nanoencapsulation of the EOs favored its deposition in the stratum corneum compared to free EOs; the highest deposition rate was obtained for 1,8-cineole, a major component of L. dentata, at 1 h contact time, compared to R. officinalis with a major deposition of the camphor component. In conclusion, NC-EOs can be used as an alternative antioxidant for skin care.

Dissolving and Swelling Hydrogel-Based Microneedles: An Overview of Their Materials, Fabrication, Characterization Methods, and Challenges

Polymeric hydrogels are a complex class of materials with one common feature-the ability to form three-dimensional networks capable of imbibing large amounts of water or biological fluids without being dissolved, acting as self-sustained containers for various purposes, including pharmaceutical and biomedical applications. Transdermal pharmaceutical microneedles are a pain-free drug delivery system that continues on the path to widespread adoption-regulatory guidelines are on the horizon, and investments in the field continue to grow annually. Recently, hydrogels have generated interest in the field of transdermal microneedles due to their tunable properties, allowing them to be exploited as delivery systems and extraction tools. As hydrogel microneedles are a new emerging technology, their fabrication faces various challenges that must be resolved for them to redeem themselves as a viable pharmaceutical option. This article discusses hydrogel microneedles from a material perspective, regardless of their mechanism of action. It cites the recent advances in their formulation, presents relevant fabrication and characterization methods, and discusses manufacturing and regulatory challenges facing these emerging technologies before their approval.

Translational Research Techniques for the Facial Plastic Surgeon: An Overview

The field of facial plastic and reconstructive surgery (FPRS) is an incredibly diverse, multispecialty field that seeks innovative and novel solutions for the management of physical defects on the head and neck. To aid in the advancement of medical and surgical treatments for these defects, there has been a recent emphasis on the importance of translational research. With recent technological advancements, there are now a myriad of research techniques that are widely accessible for physician and scientist use in translational research. Such techniques include integrated multiomics, advanced cell culture and microfluidic tissue models, established animal models, and emerging computer models generated using bioinformatics. This study discusses these various research techniques and how they have and can be used for research in the context of various important diseases within the field of FPRS.

Modulation of hair growth by topical drug delivery enhanced by STAR particles

Topical treatments to modulate hair growth are generally limited by low drug bioavailability due to poor skin permeability. Here, we studied the use of STAR particles, which are millimeter-sized ceramic particles with protruding microneedles, to form micropores in the skin to increase skin permeability to hair growth-modulating drugs. STAR particle design and fabrication were optimized, and the resulting STAR particles were shown to reduce lag time and increase skin permeability to minoxidil and acyclovir by more than three-fold compared to no treatment in pig skin ex vivo. In rats, STAR particles also improved topical delivery of minoxidil and acyclovir, which resulted in an increase or a decrease in the number, length and/or thickness of hairs and/or the number of anagen-phase hair follicles after minoxidil or acyclovir treatment, respectively. Clinical exam and histological evaluation showed no evidence of skin irritation or other adverse effects of the treatments. We conclude that STAR particles can increase topical delivery of minoxidil and acyclovir to improve modulation of hair growth promotion and inhibition, respectively.

Three-Dimensional Cell Cultures: The Bridge between In Vitro and In Vivo Models

Although historically, the traditional bidimensional in vitro cell system has been widely used in research, providing much fundamental information regarding cellular functions and signaling pathways as well as nuclear activities, the simplicity of this system does not fully reflect the heterogeneity and complexity of the in vivo systems. From this arises the need to use animals for experimental research and in vivo testing. Nevertheless, animal use in experimentation presents various aspects of complexity, such as ethical issues, which led Russell and Burch in 1959 to formulate the 3R (Replacement, Reduction, and Refinement) principle, underlying the urgent need to introduce non-animal-based methods in research. Considering this, three-dimensional (3D) models emerged in the scientific community as a bridge between in vitro and in vivo models, allowing for the achievement of cell differentiation and complexity while avoiding the use of animals in experimental research. The purpose of this review is to provide a general overview of the most common methods to establish 3D cell culture and to discuss their promising applications. Three-dimensional cell cultures have been employed as models to study both organ physiology and diseases; moreover, they represent a valuable tool for studying many aspects of cancer. Finally, the possibility of using 3D models for drug screening and regenerative medicine paves the way for the development of new therapeutic opportunities for many diseases.

Methodologies to Evaluate the Hair Follicle-Targeted Drug Delivery Provided by Nanoparticles

Nanotechnology has been investigated for treatments of hair follicle disorders mainly because of the natural accumulation of solid nanoparticles in the follicular openings following a topical application, which provides a drug "targeting effect". Despite the promising results regarding the therapeutic efficacy of topically applied nanoparticles, the literature has often presented controversial results regarding the targeting of hair follicle potential of nanoformulations. A closer look at the published works shows that study parameters such as the type of skin model, skin sections analyzed, employed controls, or even the extraction methodologies differ to a great extent among the studies, producing either unreliable results or precluding comparisons altogether. Hence, the present study proposes to review different skin models and methods for quantitative and qualitative analysis of follicular penetration of nano-entrapped drugs and their influence on the obtained results, as a way of providing more coherent study protocols for the intended application.

Development of dissolving microneedles for intradermal delivery of the long-acting antiretroviral drug bictegravir

Oral administration and intramuscular (IM) injection are commonly recommended options for human immunodeficiency virus (HIV) treatment. However, poor patient compliance due to daily oral dosing, pain at injection sites and the demand for trained healthcare staff for injections limit the success of these administration routes, especially in low-resource settings. To overcome these limitations, for the first time, we propose novel bilayer dissolving microneedles (MNs) for the intradermal delivery of long-acting nanosuspensions of the antiretroviral (ARV) drug bictegravir (BIC) for potential HIV treatment and prevention. The BIC nanosuspensions were prepared using a wet media milling technique on a laboratory scale with a particle size of 358.99 ± 18.53 nm. The drug loading of nanosuspension-loaded MNs and BIC powder-loaded MNs were 1.87 mg/0.5 cm² and 2.16 mg/0.5 cm², respectively. Both dissolving MNs exhibited favorable mechanical and insertion ability in the human skin simulant Parafilm® M and excised neonatal porcine skin. Importantly, the pharmacokinetic profiles of Sprague Dawley rats demonstrated that dissolving MNs were able to intradermally deliver 31% of drug loading from nanosuspension-loaded MNs in the form of drug depots. After a single application, both coarse BIC and BIC nanosuspensions achieved sustained release, maintaining plasma concentrations above human therapeutic levels (162 ng/mL) in rats for 4 weeks. These minimally invasive and potentially self-administered MNs could improve patient compliance, providing a promising platform for the delivery of nanoformulated ARVs and resulting in prolonged drug release, particularly for patients in low-resource settings.

Three Dimensional Printing and Its Applications Focusing on Microneedles for Drug Delivery

Microneedles (MNs) are considered to be a novel smart injection system that causes significantly low skin invasion upon puncturing, due to the micron-sized dimensions that pierce into the skin painlessly. This allows transdermal delivery of numerous therapeutic molecules, such as insulin and vaccines. The fabrication of MNs is carried out through conventional old methods such as molding, as well as through newer and more sophisticated technologies, such as three-dimensional (3D) printing, which is considered to be a superior, more accurate, and more time- and production-efficient method than conventional methods. Three-dimensional printing is becoming an innovative method that is used in education through building intricate models, as well as being employed in the synthesis of fabrics, medical devices, medical implants, and orthoses/prostheses. Moreover, it has revolutionary applications in the pharmaceutical, cosmeceutical, and medical fields. Having the capacity to design patient-tailored devices according to their dimensions, along with specified dosage forms, has allowed 3D printing to stand out in the medical field. The different techniques of 3D printing allow for the production of many types of needles with different materials, such as hollow MNs and solid MNs. This review covers the benefits and drawbacks of 3D printing, methods used in 3D printing, types of 3D-printed MNs, characterization of 3D-printed MNs, general applications of 3D printing, and transdermal delivery using 3D-printed MNs.

Engineering and Development of a Tissue Model for the Evaluation of Microneedle Penetration Ability, Drug Diffusion, Photothermal Activity, and Ultrasound Imaging: A Promising Surrogate to Ex Vivo and In Vivo Tissues

Driven by regulatory authorities and the ever-growing demands from industry, various artificial tissue models have been developed. Nevertheless, there is no model to date that is capable of mimicking the biomechanical properties of the skin whilst exhibiting the hydrophilicity/hydrophobicity properties of the skin layers. As a proof-of-concept study, tissue surrogates based on gel and silicone are fabricated for the evaluation of microneedle penetration, drug diffusion, photothermal activity, and ultrasound bioimaging. The silicone layer aims to imitate the stratum corneum while the gel layer aims to mimic the water-rich viable epidermis and dermis present in in vivo tissues. The diffusion of drugs across the tissue model is assessed, and the results reveal that the proposed tissue model shows similar behavior to a cancerous kidney. In place of typical in vitro aqueous solutions, this model can also be employed for evaluating the photoactivity of photothermal agents since the tissue model shows a similar heating profile to skin of mice when irradiated with near-infrared laser. In addition, the designed tissue model exhibits promising results for biomedical applications in optical coherence tomography and ultrasound imaging. Such a tissue model paves the way to reduce the use of animals testing in research whilst obviating ethical concerns.

The immunological effects of intradermal particle-based vaccine delivery using a novel microinjection needle studied in a human skin explant model

For intradermal (ID) immunisation, novel needle-based delivery systems have been proposed as a better alternative to the Mantoux method. However, the penetration depth of needles in the human skin and its effect on immune cells residing in the different layers of the skin has not been analyzed. A novel and user-friendly silicon microinjection needle (Bella-mu^TM) has been developed, which allows for a perpendicular injection due to its short needle length (1.4-1.8 mm) and ultrashort bevel. We aimed to characterize the performance of this microinjection needle in the context of the delivery of a particle-based outer membrane vesicle (OMV) vaccine using an ex vivo human skin explant model. We compared the needles of 1.4 and 1.8 mm with the conventional Mantoux method to investigate the depth of vaccine injection and the capacity of the skin antigen-presenting cell (APC) to phagocytose the OMVs. The 1.4 mm needle deposited the antigen closer to the epidermis than the 1.8 mm needle or the Mantoux method. Consequently, activation of epidermal Langerhans cells was significantly higher as determined by dendrite shortening. We found that five different subsets of dermal APCs are able to phagocytose the OMV vaccine, irrespective of the device or injection method. ID delivery using the 1.4 mm needle of a OMV-based vaccine allowed epidermal and dermal APC targeting, with superior activation of Langerhans cells. This study indicates that the use of a microinjection needle improves the delivery of vaccines in the human skin.

A Comparative Analysis of Biological and Synthetic Skin Models for Drug Transport Studies

Ethical restrictions as well as practical or economic issues related to use of animal and human skin has been the main reason the growth in the number of investigations with alternative models. Reconstructed skin models, for example, have been useful to evaluate the in vitro toxicity of compounds; however, these models usually overestimate the amount of drug permeated due to impaired barrier properties. In this review, the performance of synthetic and biological skin models in transport studies was compared by considering two compounds with different physicochemical properties. The advantages and limitations of each skin model are discussed in detail. Although synthetic and reconstructed skin models have shown to be useful in the formulation optimization step, they present many limitations: (1) impaired barrier properties; (2) lack of follicular transport; (3) no metabolism in synthetic membranes; (4) differences in terms of lipid organization; (5) more affected by formulation constituents. Therefore, animal and human tissues should still be prioritized in drug transport studies until new advances in alternative models are achieved. Investigations of the impact of cell-culture conditions on skin formation, in turn, bring perspectives related to the development of unhealthy/injured skin models (an aspect that still deserves attention).

Modeling of three-dimensional innervated epidermal like-layer in a microfluidic chip-based coculture system

Reconstruction of skin equivalents with physiologically relevant cellular and matrix architecture is indispensable for basic research and industrial applications. As skin-nerve crosstalk is increasingly recognized as a major element of skin physiological pathology, the development of reliable in vitro models to evaluate the selective communication between epidermal keratinocytes and sensory neurons is being demanded. In this study, we present a three-dimensional innervated epidermal keratinocyte layer as a sensory neuron-epidermal keratinocyte co-culture model on a microfluidic chip using the slope-based air-liquid interfacing culture and spatial compartmentalization. Our co-culture model recapitulates a more organized basal-suprabasal stratification, enhanced barrier function, and physiologically relevant anatomical innervation and demonstrated the feasibility of in situ imaging and functional analysis in a cell-type-specific manner, thereby improving the structural and functional limitations of previous coculture models. This system has the potential as an improved surrogate model and platform for biomedical and pharmaceutical research.

The effect of peppermint oil addition on the physical stability, irritability, and penetration of nanostructured lipid carrier coenzyme Q10

Background: Coenzyme Q10 is formulated into Nanostructured Lipid Carrier (NLC) added with peppermint oil (PO) 0% (F1), 1% (F2), 1.5% (F3) and 2% (F4) to increase its penetration. Objective: This study aims to determine the effect of PO addition on the irritability, stability, and penetration of Coenzyme Q10 in the NLC. Methods: Coenzyme Q10 NLC was prepared using the High Shear Homogenization method. Furthermore, physical characterization was carried out. Physical stability testing was carried out for 90 days at a temperature of 25±5oC and an RH of 60±10%. The in vivo irritation test was observed for mice’s back skin after 24 hours while the penetration study was further evaluated at 2 hours of the sample application. Results: Increasing the PO amount into Coenzyme Q10 NLC reduced the viscosity which was 329.1±15.5 cps for PO 0% to 219.9±2.9 cps for 2% addition. The observation of particle morphology showed that all NLC Coenzyme Q10 has a spherical particle shape with particle size between 188.25±13.22 to 197.80±14.19 nm. All formulas had high entrapment efficiency (>80%). PO addition did not cause changes in physical characteristics during 90 days of storage. The 24 hours’ irritation test showed that F2 and F3 are non-irritating. By PO addition skin penetration improved at 2 hours’ penetration study. Conclusion: PO addition up to 2% reduced viscosity, but did not affect particle size and morphology of Coenzyme Q10 NLC. Addition of PO up to 1.5% increased entrapment efficiency, did not irritate and increased the penetration of Coenzyme Q10 NLC.

Lyotropic liquid crystal mesophases as transdermal delivery systems for lipophilic drugs: A comparative study

The present work aimed to evaluate different Liquid Crystal Mesophases (LCM) as transdermal drug delivery systems (TDDS) for nifedipine (NFD), a lipophilic drug model. The formulations composed of water, Citrus sinensis essential oil (CSEO), PPG-5-CETETH-20, and Olive oil ester PEG-7 were obtained and characterized by polarized light microscopy (PLM), rheology, small-angle x-ray scattering (SAXS), Fourier transform infrared coupled with an attenuated total reflection accessory (FTIR-ATR) and in vitro assays: bioadhesion, drug release, skin permeation, and retention tests. As a result, changes in component proportions led to several transparent viscous systems with an anisotropic profile. PLM and SAXS proved the presence of lamellar (S1), hexagonal (S3), and lamellar + hexagonal (S2) LCM, and rheology showed a high viscoelasticity profile. LCMs were able to adhere to the skin, and S2 achieved higher adhesion strength. NFD (5 mg/mL) has not modified the organization of LCMs. Results also showed that S3 promoted higher permeation and retention and higher disorganization of stratum corneum lipids, which is the main permeation-enhancing mechanism. Thus, the formulations obtained can carry and improve drug delivery through the skin and are promising TDDS for lipophilic drug administration, such as NFD.

Potential of Icariin–Glucosamine Combination in the Treatment of Osteoarthritis by Topical Application: Development of Topical Formulation and In Vitro Permeation Study

The aim of this study was to develop a topically applied formulation with the potential to alleviate arthritis ailments. A combination of two active ingredients, icariin from Epimedium L. (Species: Epimedium Koreanum) extract as a potential promoter of chondrogenesis and glucosamine sulfate as a precursor of cartilage tissues, was tested. In permeation studies, the potential for skin permeation of both substances was confirmed; however, the in vitro release test did not accurately reflect the degree of skin permeation. The in vitro release of icariin was at a level of 15.0–19.0% for the plant-extract-derived icariin and 29.0–35.0% for the pure substance. The level of glucosamine sulfate release was 38.4% (on average). For icariin of both origins, the release results were higher than those obtained via oral administration (about 12.0%), which shows the potential superiority of topical application. In addition, the physicochemical parameters that affect the in vitro release and performance of topical formulations were addressed. This preliminary research and permeation analysis of the formulation produced a promising picture of its prospects regarding arthritis treatment, although further investigation is needed.

The effect of PPAR isoform (de)activation on the lipid composition in full-thickness skin models

Human skin equivalents (HSEs) are 3D-cultured human skin models that mimic many aspects of native human skin (NHS). Although HSEs resemble NHS very closely, the barrier located in the stratum corneum (SC) is impaired. This is caused by an altered lipid composition in the SC of HSEs compared with NHS. One of the most pronounced changes in this lipid composition is a high level of monounsaturation. One key enzyme in this change is stearoyl-CoA desaturase-1 (SCD1), which catalyses the monounsaturation of lipids. In order to normalize the lipid composition, we aimed to target a group of nuclear receptors that are important regulators in the lipid synthesis. This group of receptors are known as the peroxisome proliferating activating receptors (PPARs). By (de)activating each isoform (PPAR-α, PPAR-δ and PPAR-γ), the PPAR isoforms may have normalizing effects on the lipid composition. In addition, another PPAR-α agonist Wy14643 was included as this supplement demonstrated normalizing effects in the lipid composition in a more recent study. After PPAR (ant)agonists supplementation, the mRNA of downstream targets, lipid synthesis genes and lipid composition were investigated. The PPAR downstream targets were activated, indicating that the supplements reached the keratinocytes to trigger their effect. However, minimal impact was observed on the lipid composition after PPAR isoform (de) activation. Only the highest concentration Wy14643 resulted in strong, but negative effects on CER composition. Although the novel tested modifications did not result in an improvement, more insight is gained on the nuclear receptors PPARs and their effects on the lipid barrier in full-thickness skin models.

Effect of zeta potential of innovative lipid nanocapsules on triamcinolone transdermal delivery

Two pegylated lipid nanocapsules for triamcinolone transdermal delivery were designed. Both present a size close to 50 nm and a single monomodal distribution in particle size (PI < 0.2), with a zeta potential of - 20 ± 2 and + 18 ± 1, respectively. The triamcinolone encapsulation efficacy varied between 68 and 80%. They proved to be stable under storage conditions (4 °C) for at least 6 months and at a physiological temperature, using different media, for 48 h. Also, they were shown not to affect cell viability at the concentrations used. For ex vivo transdermal experiments, newborn pig skin was used. With respect to the triamcinolone transdermal penetration, the nanocapsules were demonstrated to have an absorption promoting effect, both when the drug nanocapsules were in solution or loaded into the hydrogel, quantifying between 2 and 15 times more absorbed drug than the control. In addition, regarding the triamcinolone retained in the skin, it is observed that lipid nanocapsules act as triamcinolone promoters when the nanosystems were in solution and when they were included in the hydrogel. This vehicle showed a greater triamcinolone reservoir effect in comparison to the nanocapsules, proving to be a good vehicle to formulate triamcinolone transdermal delivery.

Direct Capture and Early Detection of Lyme Disease Spirochete in Skin with a Microneedle Patch

Borrelia burgdorferi sensu lato family of spirochetes causes Lyme disease (LD) in animals and humans. As geographic territory of ticks expands across the globe, surveillance measures are needed to measure transmission rates and provide early risk testing of suspected bites. The current standard testing of LD uses an indirect two-step serological assay that detects host immune reactivity. Early detection remains a challenge because the host antibody response develops several weeks after infection. A microneedle (MN) device was developed to sample interstitial fluid (ISF) and capture spirochetes directly from skin. After sampling, the MN patch is easily dissolved in water or TE buffer, and the presence of spirochete DNA is detected by PCR. Performance was tested by spiking porcine ear skin with inactivated Borrelia burgdorferi, which had an approximate recovery of 80% of spirochetes. With further development, this simple direct PCR method could be a transformative approach for early detection of the causative agent of Lyme disease and enable rapid treatment to patients when infection is early, and numbers of systemic spirochetes are low.

3D-printed microneedle arrays for drug delivery

Microneedle arrays provide an efficient tool for transdermal drug delivery in a minimally invasive and painless manner, showing great potential applications in medicine. However, it remains challenging to fabricate the desired microneedle arrays, because of their micron-scale size and fine structure. Novel manufacturing technologies are very wanted for the development of microneedle arrays, which would solidly advance the clinical translation of microneedle arrays. 3D printing technology is a powerful manufacturing technology with superiority in fabricating personalized and complex structures. Currently, 3D printing technology has been employed to fabricate microneedle arrays, which could push more microneedle arrays into clinic and inspire the development of future microneedle arrays. This work reviews the art of 3D printing microneedle arrays, the benefits of fabricating microneedle arrays with 3D printing, and the considerations for clinical translation of 3D-printed microneedle arrays. This work provides an overview of the current 3D-printed microneedle arrays in drug delivery.

Formulation and Evaluation of Eudragit® RL Polymeric Double Layer Films for Prolonged-Release Transdermal Delivery of Tamsulosin Hydrochloride

Transdermal drug delivery systems (TDDSs) were developed for prolonged tamsulosin (TMS) delivery. Double layer (DL) TDDSs were prepared using Eudragit® RL by conventional film-forming. Ethylene-vinyl acetate was used as the backing layer, triethylcitrate as plasticizer, and Capmul® PG-8-70 NF and Captex 170 EP as penetration enhancers (PEs). An increase in either drug or PE concentration caused a significant increase in drug permeation flux. Modulation of drug permeation across Strat-M® membrane was examined using a single layer (SL) having the same thickness and drug content as the DLs, while the DLs were formulated to have variable drug spatial distribution across each layer (DL 4:6 and DL 6:4). SL/TDDS showed significantly higher daily drug permeation than DL/TDDSs for the first 4 days which could be related to the presence of high TMS concentration located on the upper surface of SL/TDDS as a result of solute migration of TMS during the drying process. However, this increase was followed by a progressive linear decrease after 5 days. Deflection points that were characterized by lower drug flux had been shown by SL/TDDS at more than one-point times. In contrast, DL 4:6 and DL 6:4 TDDSs demonstrated an ability to sustain TMS delivery for up to 2 weeks.

Testing Topical Products Specifically to Reduce Inflammatory Pain from Gout: Transdermal NSAID Delivery and Monosodium Urate Solubility

Purpose

Gout is caused by crystals of monosodium urate (MSU) in the joints. Topical nonsteroidal anti-inflammatory drug products (NSAIDs) are often the first-choice immediate treatment. This study examined the effect of commercially available and newly developed transdermal NSAID products on the solubility of MSU in a physiologically relevant system, alongside the efficacy of transdermal NSAID delivery.

Materials and Methods

Drug permeability of 7 commercially available topical NSAID products, alongside 3 newly developed “Gout Buster” products, was evaluated in vitro using pig’s ear skin in Franz diffusion cells. The standard Franz cell experimental protocol was adapted to include assessment of MSU solubility in phosphate buffered saline for each product. Some materials were also tested via direct solubility studies.

Results

The amount of drug delivered transdermally varied significantly between different formulations, with the best ibuprofen delivery being ~5 times higher than the lowest, and best diclofenac delivery being ~3.5 times higher than the lowest. Changes in formulations and the drug concentration in the product both affected the amount of drug delivered. Overall ibuprofen permeation was higher than diclofenac. The commercially available products showed little or no effect on the MSU solubility (99–103% vs control). The Gout Buster products showed significant improvement in the MSU solubility after permeation through skin (120–126%). Increased sodium levels reduced the solubility of MSU in direct solubility studies.

Conclusion

In these trials, the Gout Buster products showed significantly improved permeation of both ibuprofen and diclofenac over the commercial products at similar drug concentrations, and showed significant improvement for MSU solubility. Increased sodium levels reduced the solubility of MSU and could cause more crystallisation in vivo. Therefore, topical NSAID products with the Gout Buster formulation may have the best likelihood of both reducing inflammation and helping re-dissolve the MSU crystals that cause gout.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/lkOR3b56f2s

The Rise of Polymeric Microneedles: Recent Developments, Advances, Challenges, and Applications with Regard to Transdermal Drug Delivery

The current scenario of the quest for microneedles (MNs) with biodegradability and biocompatibility properties is a potential research area of interest. Microneedles are considered to be robust, can penetrate the skin's deep-seated layers, and are easy to manufacture, and their applications from the clinical perspective are still ongoing with standard escalation. This review paper focuses on some of the pivotal variants of polymeric microneedles which are specifically dissolvable and swell-based MNs. It further explores the drug dissolution kinetics and insertion behavior mechanisms with an emphasis on the need for mathematical modeling of MNs. This review further evaluates the multifarious fabrication methods, with an update on the advances in the fabrication of polymeric MNs, the choice of materials used for the fabrication, the challenges in polymeric MN fabrication, and the prospects of polymeric MNs with applications pertinent to healthcare, by exclusively focusing on the procurable literature over the last decade.

Ciprofloxacin-loaded dissolving polymeric microneedles as a potential therapeutic for the treatment of S. aureus skin infections

Microneedles have been widely studied for many topical and transdermal therapeutics due to their ability to painlessly puncture the skin, thereby bypassing the stratum corneum, the main skin barrier. In this study, ciprofloxacin (CIP) was loaded into dissolving polymeric microneedles prepared by a two-layer centrifugation method as a potential treatment of skin infections such as cellulitis. The polymers used were polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP). Two formulations were investigated, namely CIP_MN1, composed of 10 mg ciprofloxacin incorporated into a polymer matrix of PVA and PVP with a weight ratio of (9:1), and CIP_MN2, composed of 10 mg ciprofloxacin incorporated into PVA polymer. CIP_MN1 and CIP_MN2 showed a mean microneedle height of 188 and 179 µm, respectively. Since Parafilm has been proven as a model to examine the perforation of microneedles in skin, it was used to evaluate the ability of microneedles to perforate the skin. CIP_MN1 showed almost complete perforation of Parafilm, 190 pores, compared to CIP_MN2 which created only 85 pores in Parafilm, and therefore CIP_MN1 was used for subsequent studies. Examining CIP_MN1 on agarose gel as an in vitro model of human skin showed that the formula was able to fully perforate the agarose gel. Moreover, this formula showed significantly greater antimicrobial activity (p < 0.0001) compared to a free gel of ciprofloxacin against Staphylococcus aureus in an agarose gel-based model. This was evidenced by a zone of inhibition of 29 mm for the microneedle formulation of ciprofloxacin (CIP_MN1) compared to 2 mm for the free gel of ciprofloxacin. Furthermore, the CIP_MN1 showed complete dissolution in human skin after 60 min from application. Finally, the skin deposition of CIP_MN1 was investigated in ex vivo excised human skin. CIP_MN1 showed significantly more deposition of ciprofloxacin in deeper skin layers compared to the free gel of ciprofloxacin, and the released ciprofloxacin from the microneedles tends to migrate to deeper layers with time. Collectively, these results suggest that CIP_MN1 can be a potential delivery system for the treatment of S. aureus skin infections.

Dual Nanostructured Lipid Carriers/Hydrogel System for Delivery of Curcumin for Topical Skin Applications

This work focuses on the development and evaluation of a dual nanostructured lipid carrier (NLC)/Carbopol®-based hydrogel system as a potential transporter for the topical delivery of curcumin to the skin. Two populations of different sized negatively charged NLCs (P1, 70–90 nm and P2, 300–350 nm) were prepared and characterized by means of dynamic light scattering. NLCs presented an ovoid platelet shape confirmed by transmission electron microscopy techniques. Curcumin NLC entrapment efficiency and release profiles were assessed by HPLC (high pressure liquid chromatography) and spectrophotometric methods. Preservation and enhancement of curcumin (CUR) antioxidant activity in NLCs (up to 7-fold) was established and cell viability assays on fibroblasts and keratinocytes indicated that CUR-NLCs are non-cytotoxic for concentrations up to 10 μM and exhibited a moderate anti-migration/proliferation effect (20% gap reduction). CUR-NLCs were then embedded in a Carbopol®-based hydrogel without disturbing the mechanical properties of the gel. Penetration studies on Franz diffusion cells over 24 h in CUR-NLCs and CUR-NLCs/gels demonstrated an accumulation of CUR in Strat-M® membranes of 22% and 5%, respectively. All presented data support the use of this new dual CUR-NLC/hydrogel system as a promising candidate for adjuvant treatment in topical dermal applications.

Microemulsions formed by PPG-5-CETETH-20 at low concentrations for transdermal delivery of nifedipine: Structural and in vitro study

Nifedipine is a potent anti-hypertensive, which is poorly orally bioavailable on account of first-pass metabolism, short half-life, and low water solubility. This study aimed to develop a microemulsified system with low surfactant concentration and to evaluate the influence of microemulsion (ME) phase behavior on skin permeation of nifedipine, as drug model. Thereafter, MEs were obtained using PPG-5-CETETH-20, oleic acid, and phosphate buffer at pH 5.0. The selected MEs were isotropic, with droplet diameters less than 10 nm, polydispersity index < 0.25, and pH between 5.0 and 5.2. MEs presented low viscosity and Newtonian behavior. SAXS results confirmed bicontinuous and oil-in-water (o/w) MEs formation. The presence of the drug promoted only very slight modifications in the ME structure. The MEs presented ability to deliver nifedipine via the transdermal route when in comparison with the control. Nevertheless, the skin permeated and retained amounts from the o/w and bicontinuous formulations did not differ significantly. The ATR-FTIR demonstrated that both formulations promoted fluidization and disorganization of lipids and increased the drug diffusion and partition coefficients in the skin. In conclusion, PPG-5-CETETH-20 MEs obtained proved to be effective skin permeation enhancers, acting by rising the coefficients of partition and diffusion of the nifedipine in the skin.

Comparison Between Franz Diffusion Cell and a novel Micro-physiological System for In Vitro Penetration Assay Using Different Skin Models

In vitro diffusive models are an important tool to screen the penetration ability of active ingredients in various formulations. A reliable assessment of skin penetration enhancing properties, mechanism of action of carrier systems, and an estimation of a bioavailability are essential for transdermal delivery. Given the importance of testing the penetration kinetics of different compounds across the skin barrier, several in vitro models have been developedThe aim of this study was to compare the Franz Diffusion Cell (FDC) with a novel fluid-dynamic platform (MIVO) by evaluating penetration ability of caffeine, a widely used reference substance, and LIP1, a testing molecule having the same molecular weight but a different lipophilicity in the two diffusion chamber systems. A 0.7% caffeine or LIP1 formulation in either water or propylene glycol (PG) containing oleic acid (OA) was topically applied on the Strat-M® membrane or pig ear skin, according to the infinite-dose experimental condition (780 ul/cm²). The profile of the penetration kinetics was determined by quantify the amount of molecule absorbed at different time-points (1, 2, 4, 6, 8 hours), by means of HPLC analysis. Both diffusive systems show a similar trend for caffeine and LIP1 penetration kinetics. The Strat-M® skin model shows a lower barrier function than the pig skin biopsies, whereby the PGOA vehicle exhibits a higher penetration, enhancing the effect for both diffusive chambers and skin surrogates. Most interestingly, MIVO diffusive system better predicts the lipophilic molecules (i.e. LIP1) permeation through highly physiological fluid flows resembled below the skin models.

Comparative study of the percutaneous permeation and bioaccumulation of the cyclic siloxane using frozen-thawed and nonfrozen ex vivo human skin

Literature shows contradictory information regarding the effect of freezing the excise skin ex vivo on the diffusion of substances into the skin. Few studies indicate that storing the human or animal skin in a frozen state decreases the barrier properties after thawing. Therefore, to understand the properties of frozen skin, we evaluated the effect of storage of ex vivo human skin (2 weeks at -20 °C) on the penetration of stratum corneum and permeation into deeper skin layers (epidermis, and dermis) as well as to the receptor fluid by octamethylcyclotetrasiloxane (D4) a representative test compound of cyclic siloxanes. The main research were preceded by checking the integrity of nonfrozen ex vivo human skin in comparison to the frozen-thawed one by using the Electrical Resistance technique (ER) and the fluorescence microscopy. Samples collected in the skin absorption experiment were analyzed by gas chromatography equipped with a flame ionization detector (GC-FID). The results of this study demonstrated that freezing of excised ex vivo human skin at -20 °C for up to 14 days does not alter the permeability of D4 in a statistically significant manner. Thus, our results confirmed the validity of using skin storage conditions for testing the penetration and permeation of xenobiotics recommended by the OECD, EMA, and WHO guidelines.

Organoids for toxicology and genetic toxicology: applications with drugs and prospects for environmental carcinogenesis

Advances in three-dimensional (3D) cell culture technology have led to the development of more biologically and physiologically relevant models to study organ development, disease, toxicology and drug screening. Organoids have been derived from many mammalian tissues, both normal and tumour, from adult stem cells and from pluripotent stem cells. Tissue organoids can retain many of the cell types and much of the structure and function of the organ of origin. Organoids derived from pluripotent stem cells display increased complexity compared with organoids derived from adult stem cells. It has been shown that organoids express many functional xenobiotic-metabolising enzymes including cytochrome P450s (CYPs). This has benefitted the drug development field in facilitating pre-clinical testing of more personalised treatments and in developing large toxicity and efficacy screens for a range of compounds. In the field of environmental and genetic toxicology, treatment of organoids with various compounds has generated responses that are close to those obtained in primary tissues and in vivo models, demonstrating the biological relevance of these in vitro multicellular 3D systems. Toxicological investigations of compounds in different tissue organoids have produced promising results indicating that organoids will refine future studies on the effects of environmental exposures and carcinogenic risk to humans. With further development and standardised procedures, advancing our understanding on the metabolic capabilities of organoids will help to validate their use to investigate the modes of action of environmental carcinogens.

Skin models for dermal exposure assessment of phthalates

Phthalates are a class of compounds that have found widespread use in industrial applications, in particular in the polymer, cosmetics and pharmaceutical industries. While ingestion, and to a lesser degree inhalation, have been considered as the major exposure routes, especially for higher molecular weight phthalates, dermal exposure is an important route for lower weight phthalates such as diethyl phthalate (DEP). Assessing the dermal permeability of such compounds is of great importance for evaluating the impact and toxicity of such compounds in humans. While human skin is still the best model for studying dermal permeation, availability, cost and ethical concerns may preclude or restrict its use. A range of alternative models has been developed over time to substitute for human skin, especially in the early phases of research. These include ex vivo animal skin, human reconstructed skin and artificial skin models. While the results obtained using such alternative models correlate to a lesser or greater degree with those from in vivo human studies, the use of such models is nevertheless vital in dermal permeation research. This review discusses the alternative skin models that are available, their use in phthalate permeation studies and possible new avenues of phthalate research using skin models that have not been used so far.

α-Linolenic acid and linoleic acid modulate the lipidome and the skin barrier of a tissue-engineered skin model

Polyunsaturated fatty acids (PUFAs) play an important role in the establishment and the maintenance of the skin barrier function. However, the impact of their derived lipid mediators remains unclear. Skin substitutes were engineered according to the self-assembly method with a culture medium supplemented with 10 μM of both α-linolenic acid (ALA) and linoleic acid (LA). The supplementation with ALA and LA decreased testosterone absorption through a tissue-engineered reconstructed skin model, thus indicating an improved skin barrier function following supplementation. The exogenously provided fatty acids were incorporated into the phospholipid and triglyceride fractions of the skin substitutes. Indeed, the dual supplementation increased the levels of eicosapentaenoic acid (EPA) (15-fold), docosapentaenoic acid (DPA) (3-fold), and LA (1.5-fold) in the epidermal phospholipids while it increased the levels of ALA (>20-fold), DPA (3-fold) and LA (1.5-fold) in the epidermal triglycerides. The bioactive lipid mediator profile of the skin substitutes, including prostaglandins, hydroxy-fatty acids, N-acylethanolamines and monoacylglycerols, was next analyzed using liquid chromatography-tandem mass spectrometry. The lipid supplementation further modulated bioactive lipid mediator levels of the reconstructed skin substitutes, leading to a lipid mediator profile more representative of the one found in normal human skin. These findings show that an optimized supply of PUFAs via culture media is essential for the establishment of improved barrier function in vitro. STATEMENT OF SIGNIFICANCE: Supplementation of the culture medium with 10 μM of both α-linolenic acid (ALA) and linoleic acid (LA) improved the skin barrier function of a tissue-engineered skin model. The exogenously provided fatty acids were incorporated into the phospholipid and triglyceride fractions of the skin substitutes and further modulated bioactive lipid mediator levels, including prostaglandins, hydroxy-fatty acids, N-acylethanolamines and monoacylglycerols. These findings highlight the important role of ALA and LA in skin homeostasis and show that an optimized supply of polyunsaturated fatty acids via culture media is essential for the establishment of improved barrier function in vitro.

Revisiting techniques to evaluate drug permeation through skin

INTRODUCTION

Investigating the transportation of a drug molecule through various layers of skin and determining the amount of drug retention in skin layers is of prime importance in transdermal and topical drug delivery. The information regarding drug permeation and retention in skin layers aids in optimizing a formulation and provides insight into the therapeutic efficacy of a formulation.

AREAS COVERED

This perspective covers various methods that have been explored to estimate drug/therapeutics in skin layers using in vitro, ex vivo, and in vivo conditions. In vitro methods such as diffusion techniques, ex vivo methods such as isolated perfused skin models and in vivo techniques including dermato-pharmacokinetics employing tape stripping, and microdialysis are discussed. Application of all techniques at various stages of formulation development where various local and systemic effects need to be considered.

EXPERT OPINION

The void in the existing methodologies necessitates improvement in the field of dermatologic research. Standardization of protocols, experimental setups, regulatory guidelines, and further research provides information to select an alternative for human skin to perform skin permeation experiments to increase the reliability of data generated through the available techniques. There is a need to utilize multiple techniques for appropriate dermato-pharmacokinetics evaluation and formulation's efficacy.

Thermoresponsive Hydrogel Containing Viscum album Extract for Topic and Transdermal Use: Development, Stability and Cytotoxicity Activity

Viscum album L. (Santalaceae), also known as European mistletoe, is a semi-parasitic plant that grows on different host trees. Our group recently demonstrated the antitumoral activity of ethanolic V. album extracts in vitro, depending on the dose and the host tree, V. album ssp abietis from Abies alba being the most active extract. The goal of this work focused on the development of a new topical formulation containing V. album extracts, evaluation of in vitro toxicity and ex vivo skin permeation assays. The Poloxamer 407 hydrogel containing 5% of dry (VA_DEH) or aqueous (VA_AEH) extract presented dermal compatible pH and microbiological stability for 180 days. The hydrogels flow curve presented a non-linear relation, characteristic of non-Newtonian fluids, and the mean viscosity for the VA_DEH and VA_AEH was 372.5 ± 7.78 and 331.0 ± 2.83 Pa.s, respectively, being statistically different (Welch’s t test; p < 0.01). Additionally, WST-1 in vitro assays revealed a dose-dependent toxicity for both formulations and VA_DEH presented a higher activity than the VA_AEH. The promising cytotoxic potential of VA_DEH lead to the ex vivo skin permeation assay with 2.73 ± 0.19 µg/cm² of chlorogenic acid, which permeated at 8 h, showing a transdermal potential. These in vitro results support the idea that VA_DEH is a novel promising candidate for mistletoe therapy. Therefore, further in vivo and pre-clinical experiments should be performed to evaluate the safety and efficacy of this new dermic delivery system.