Electrospun polycaprolactone nanofibers as a potential oromucosal delivery system for poorly water-soluble drugs

Antibacterial and Osteogenic Dual-Functional Micronano Composite Scaffold Fabricated via Melt Electrowriting and Solution Electrospinning for Bone Tissue Engineering

The utilization of micronano composite scaffolds has been extensively demonstrated to confer the superior advantages in bone repair compared to single nano- or micron-sized scaffolds. Nevertheless, the enhancement of bioactivities within these composite scaffolds remains challenging. In this study, we propose a novel approach to combine melt electrowriting (MEW) and solution electrospinning (SES) techniques for the fabrication of a composite scaffold incorporating hydroxyapatite (HAP), an osteogenic component, and roxithromycin (ROX), an antibacterial active component. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) confirmed the hierarchical architecture of the nanofiber-microgrid within the scaffold, as well as the successful loading of HAP and ROX. The incorporation of HAP enhanced the water absorption capacity of the composite scaffold, thus promoting cell adhesion and proliferation, as well as osteogenic differentiation. Furthermore, ROX resulted in effective antibacterial capability without any observable cytotoxicity. Finally, the scaffolds were applied to a rat calvarial defect model, and the results demonstrated that the 20% HAP group exhibited superior new bone formation without causing adverse reactions. Therefore, our findings present a promising strategy for designing and fabricating bioactive scaffolds for bone regeneration.

The Incorporated Drug Affects the Properties of Hydrophilic Nanofibers

Hydrophilic nanofibers offer promising potential for the delivery of drugs with diverse characteristics. Yet, the effects of different drugs incorporated into these nanofibers on their properties remain poorly understood. In this study, we systematically explored how model drugs, namely ibuprofen, carvedilol, paracetamol, and metformin (hydrochloride), affect hydrophilic nanofibers composed of polyethylene oxide and poloxamer 188 in a 1:1 weight ratio. Our findings reveal that the drug affects the conductivity and viscosity of the polymer solution for electrospinning, leading to distinct changes in the morphology of electrospun products. Specifically, drugs with low solubility in ethanol, the chosen solvent for polymer solution preparation, led to the formation of continuous nanofibers with uniform diameters. Additionally, the lower solubility of metformin in ethanol resulted in particle appearance on the nanofiber surface. Furthermore, the incorporation of more hydrophilic drugs increased the surface hydrophilicity of nanofiber mats. However, variations in the physicochemical properties of the drugs did not affect the drug loading and drug entrapment efficiency. Our research also shows that drug properties do not notably affect the immediate release of drugs from nanofibers, highlighting the dominant role of the hydrophilic polymers used. This study emphasizes the importance of considering specific drug properties, such as solubility, hydrophilicity, and compatibility with the solvent used for electrospinning, when designing hydrophilic nanofibers for drug delivery. Such considerations are crucial for optimizing the properties of the drug delivery system, which is essential for achieving therapeutic efficacy and safety.

Design and development of dual drug-loaded nanofibrous inserts for ophthalmic sustained delivery of AMK and VAN: Pharmacokinetic study in rabbit's eye

Bacterial corneal keratitis is a damage to the corneal tissue that if not treated, can cause various complications like severe vision loss or even blindness. Combination therapy with two antibiotics which are effective against Gram-positive and Gram-negative bacteria offers sufficient broad-spectrum antibiotic coverage for the treatment of keratitis. Nanofibers can be a potential carrier in dual drug delivery due to their structural characteristics, specific surface area and high porosity. In order to achieve a sustained delivery of amikacin (AMK) and vancomycin (VAN), the current study designed, assessed, and compared nanofibrous inserts utilizing polyvinyl alcohol (PVA) and polycaprolactone (PCL) as biocompatible polymers. Electrospinning method was utilized to prepare two different formulations, PVA-VAN/AMK and PCL/PVA-VAN/AMK, with 351.8 ± 53.59 nm and 383.85 ± 49 nm diameters, respectively. The nanofibers were simply inserted in the cul-de-sac as a noninvasive approach for in vivo studies. The data obtained from the physicochemical and mechanical properties studies confirmed the suitability of the formulations. Antimicrobial investigations showed the antibacterial properties of synthesized nanofibers against Staphylococcus aureus and Pseudomonas aeruginosa. Both in vitro and animal studies demonstrated sustained drug release of the prepared nanofibers for 120 h. Based on the in vivo findings, the prepared nanofibers' AUC0-120 was found to be 20 to 31 times greater than the VAN and AMK solutions. Considering the results, the nanofibrous inserts can be utilized as an effective and safe system in drug delivery.

Optimizing the fabrication of electrospun nanofibers of prochlorperazine for enhanced dissolution and permeation properties

Despite being an approved antiemetic for more than five decades, the clinical usefulness of prochlorperazine is limited by its low solubility and inconsistent absorption in the gastrointestinal tract, which presents challenges for nanotherapeutic interventions. Here, we report the preparation of a highly soluble and permeable nanofiber formulation of prochlorperazine using the Quality-by-Design approach. The final nanofiber formulation with drug entrapment of 88.02 ± 1.14 % was obtained at 20.0 kV, with a flow rate of 0.5 ml/h and tip-to-collector distance of 19.9 cm. Physio-mechanical properties, such as thickness (0.42 ± 0.02 mm), pH resistance (7.04 ± 0.08), folding endurance (54 ± 5), and tensile strength (0.244 ± 0.02 N.mm-2), were appropriate for packaging and application to oromucosal surfaces. The content uniformity (93.48-106.63 %) and weight variation (<1.8 mg) of the optimal nanofiber formulation were within the permissible limits prescribed for orodispersible films. Microscopical investigations confirm a randomly deposited and dense network of woven nanofibers with an average diameter of 363 ± 5.66 nm. The drug particles were embedded homogeneously on the fiber in the nanoform (4.27 ± 1.34 nm). The spectral analysis using TEM-EDS shows diffraction peaks of sulfur and chlorine, the elemental constituents of prochlorperazine. The drug was amorphized in the nanofiber formulation, as led by the decline of the crystallinity index from 87.25 % to 7.93 % due to electrostatic destabilization and flash evaporation of the solvent. The enthalpy of fusion values of the drug in the nanofiber mat decreased significantly to 23.6 J/g compared to its pristine form, which exhibits a value of 260.7 J/g. The nanofibers were biocompatible with oral mucosal cells, and there were no signs of mucosal irritation compared to 1 % sodium lauryl sulfate. The fiber mats rapidly disintegrated within <1 s and released ≈91.49 ± 2.1 % of the drug within 2 min, almost 2-fold compared to the commercial Stemetil MD® tablets. Similarly, the cumulative amount of the drug permeated across the unit area of the oromucosal membrane was remarkably high (31.28 ± 1.30 μg) compared to 10.17 ± 1.11 μg and 13.10 ± 1.79 μg from the cast film and drug suspension. Our results revealed these nanofiber formulations have the potential to be fast-dissolving oromucosal delivery systems, which can result in enhanced bioavailability with an early onset of action due to rapid disintegration, dissolution, and permeation.

Mesoporous silica nanoparticles accommodating electrospun nanofibers as implantable local drug delivery system processed by cold atmospheric plasma and spin coating approaches

Nanofibers (NF) and nanoparticles are attractive for drug delivery to improve the drug bioavailability and administration. Easy manipulation of NF as macroscopic bulk material give rise to potential usages as implantable local drug delivery systems (LLDS) to overcome the failures of systemic drug delivery systems such as unmet personalized needs, side effects, suboptimal dosage. In this study, poly(ethylene glycol) polyethyleneimine (mPEG:PEI) copolymer blended polyϵ-caprolactone NFs, NFblendaccommodating mesoporous silica nanoparticles (MSN) as the implantable LLDS was achieved by employing spin coating and cold atmospheric plasma (CAP) as the post-process for accommodation on NFblend. The macroporous morphology, mechanical properties, wettability, andin vitrocytocompatibility of NFblendensured their potential as an implantable LLDS and superior features compared to neat NF. The electron microscopy images affirmed of NFblendrandom fiber (average diameter 832 ± 321 nm) alignments and accessible macropores before and after MSN@Cur accommodation. The blending of polymers improved the elongation of NF and the tensile strength which is attributed as beneficial for implantable LLDS. CAP treatment could significantly improve the wettability of NF observed by the contact angle changes from ∼126° to ∼50° which is critical for the accommodation of curcumin-loaded MSN (MSN@Cur) andin vitrocytocompatibility of NF. The combined CAP and spin coating as the post-processes was employed for accommodating MSN@Cur on NFblendwithout interfering with the electrospinning process. The post-processing aided fine-tuning of curcumin dosing (∼3 µg to ∼15 µg) per dose unit and sustained zero-order drug release profile could be achieved. Introducing of MSN@Cur to cells via LLDS promoted the cell proliferation compared to MSN@Cur suspension treatments and assigned as the elimination of adverse effects by nanocarriers by the dosage form integration. All in all, NFblend-MSN@Cur was shown to have high potential to be employed as an implantable LLDS. To the best of our knowledge, this is the first study in which mPEG:PEI copolymer blend NF are united with CAP and spin coating for accommodating nano-drug carriers, which allows for NF both tissue engineering and drug delivery applications.

Harnessing filamentous phages for enhanced stroke recovery

Stroke poses a critical global health challenge, leading to substantial morbidity and mortality. Existing treatments often miss vital timeframes and encounter limitations due to adverse effects, prompting the pursuit of innovative approaches to restore compromised brain function. This review explores the potential of filamentous phages in enhancing stroke recovery. Initially antimicrobial-centric, bacteriophage therapy has evolved into a regenerative solution. We explore the diverse role of filamentous phages in post-stroke neurological restoration, emphasizing their ability to integrate peptides into phage coat proteins, thereby facilitating recovery. Experimental evidence supports their efficacy in alleviating post-stroke complications, immune modulation, and tissue regeneration. However, rigorous clinical validation is essential to address challenges like dosing and administration routes. Additionally, genetic modification enhances their potential as injectable biomaterials for complex brain tissue issues. This review emphasizes innovative strategies and the capacity of filamentous phages to contribute to enhanced stroke recovery, as opposed to serving as standalone treatment, particularly in addressing stroke-induced brain tissue damage.

A novel chitosan-based doxepin nano-formulation for chemotherapy-induced oral mucositis: a randomized, double-blinded, placebo-controlled clinical trial

OBJECTIVES

Considering the prevalence of oral mucositis, we aimed to use the analgesic effects of doxepin with chitosan's antimicrobial and bio-adhesive nature to fabricate a nano-formulation for treating chemotherapy-induced oral mucositis.

MATERIALS AND METHODS

Nanogel was fabricated via ionic gelation and characterized. Sixty patients were randomly divided and received four different treatments for 14 days: diphenhydramine + aluminum-magnesium mouthwash (control), doxepin mouthwash (DOX MW), chitosan nanogel (CN), and doxepin/chitosan nanogel (CN + DOX). Lesions were assessed with four indices, National Cancer Institute (NCI), World Health Organization (WHO), World Conference on Clinical and Research in Nursing (WCCNR) and visual analog scale (VAS) before and 3, 7, and 14 days after interventions. Kruskal-Wallis test was used for pairwise comparison.

RESULTS

CN had semisolid consistency, uniform spherical shape, an average size of 47.93 ± 21.69 nm, and a zeta potential of + 1.02 ± 0.16 mV. CN + DOX reduced WHO, WCCNR, and VAS scores significantly more than the control three days after the intervention. Seven days after the intervention, CN + DOX reduced NCI and WCCNR considerably more than the control; it reduced WCCNR significantly more than CN. Fourteen days after the intervention, CN + DOX decreased NCI markedly more than the control.

CONCLUSION

Chitosan-based doxepin nano-formulation might be a promising alternative for routine treatments of oral mucositis.

Electrospun Nanofiber-Based Drug Carrier to Manage Inflammation

Significance: Nonsteroidal anti-inflammatory drugs (NSAIDs) are one of the most widely prescribed drugs to treat inflammation and related ailments. In recent years, loading these drugs onto nanodevices like nanoparticles, nanofibers, etc. as a drug delivery system has gained momentum due to its desirable properties and advantages. The purpose of this review is to examine the existing research on the potential and novel use of nanofiber-assisted delivery of NSAIDs. Recent Advances: Electrospun nanofibers have recently garnered considerable attention from researchers in a variety of sectors. They have proved to be promising vehicles for drug delivery systems because of their exceptional and favorable features like prolonged drug release, controllable porosity, and high surface area. In this article, various polymers and even combinations of polymers loaded with single or multiple drugs were analyzed to achieve the desired drug release rates (burst, sustained, and biphasic) from the electrospun nanofibers. Critical Issues: The administration of these medications can induce major adverse effects, causing patients discomfort. Thus, encapsulating these drugs within electrospun nanofibers helps to reduce the severity of side effects while also providing additional benefits such as targeted and controlled drug release, reduced toxicity, and long-lasting effects of the drug with lower amounts of administration. Future Directions: This review covers previous research on the delivery of NSAIDs using electrospun nanofibers as the matrix. Also, this study intends to aid in the development of enhanced drug delivery systems for the treatment of inflammation and related issues.

Research Progress on Nanomaterials for Tissue Engineering in Oral Diseases

Due to their superior antibacterial properties, biocompatibility and high conductivity, nanomaterials have shown a broad prospect in the biomedical field and have been widely used in the prevention and treatment of oral diseases. Also due to their small particle sizes and biodegradability, nanomaterials can provide solutions for tissue engineering, especially for oral tissue rehabilitation and regeneration. At present, research on nanomaterials in the field of dentistry focuses on the biological effects of various types of nanomaterials on different oral diseases and tissue engineering applications. In the current review, we have summarized the biological effects of nanoparticles on oral diseases, their potential action mechanisms and influencing factors. We have focused on the opportunities and challenges to various nanomaterial therapy strategies, with specific emphasis on overcoming the challenges through the development of biocompatible and smart nanomaterials. This review will provide references for potential clinical applications of novel nanomaterials in the field of oral medicine for the prevention, diagnosis and treatment of oral diseases.

Exploring the Potential of Nanotechnology in Pediatric Healthcare: Advances, Challenges, and Future Directions

The utilization of nanotechnology has brought about notable advancements in the field of pediatric medicine, providing novel approaches for drug delivery, disease diagnosis, and tissue engineering. Nanotechnology involves the manipulation of materials at the nanoscale, resulting in improved drug effectiveness and decreased toxicity. Numerous nanosystems, including nanoparticles, nanocapsules, and nanotubes, have been explored for their therapeutic potential in addressing pediatric diseases such as HIV, leukemia, and neuroblastoma. Nanotechnology has also shown promise in enhancing disease diagnosis accuracy, drug availability, and overcoming the blood-brain barrier obstacle in treating medulloblastoma. It is important to acknowledge that while nanotechnology offers significant opportunities, there are inherent risks and limitations associated with the use of nanoparticles. This review provides a comprehensive summary of the existing literature on nanotechnology in pediatric medicine, highlighting its potential to revolutionize pediatric healthcare while also recognizing the challenges and limitations that need to be addressed.

Nanofibrous insulin/vildagliptin core-shell PLGA scaffold promotes diabetic wound healing

Introduction: Slow wound repair in diabetes is a serious adverse event that often results in loss of a limb or disability. An advanced and encouraging vehicle is wanted to enhance clinically applicable diabetic wound care. Nanofibrous insulin/vildagliptin core-shell biodegradable poly (lactic-co-glycolic acid) (PLGA) scaffolds to prolong the effective drug delivery of vildagliptin and insulin for the repair of diabetic wounds were prepared. Methods: To fabricate core-shell nanofibrous membranes, vildagliptin mixture with PLGA, and insulin solution were pumped via separate pumps into two differently sized capillary tubes that were coaxially electrospun. Results and Discussion: Nanofibrous core-shell scaffolds slowly released effective vildagliptin and insulin over 2 weeks in vitro migration assay and in vivo wound-healing models. Water contact angle (68.3 ± 8.5° vs. 121.4 ± 2.0°, p = 0.006) and peaked water absorbent capacity (376% ± 9% vs. 283% ± 24%, p = 0.003) of the insulin/vildagliptin core-shell nanofibrous membranes remarkably exceeded those of a control group. The insulin/vildagliptin-loaded core-shell nanofibers improved endothelial progenitor cells migration in vitro (762 ± 77 cells/mm² vs. 424.4 ± 23 cells/mm², p < 0.001), reduced the α-smooth muscle actin content in vivo (0.72 ± 0.23 vs. 2.07 ± 0.37, p < 0.001), and increased diabetic would recovery (1.9 ± 0.3 mm² vs. 8.0 ± 1.4 mm², p = 0.002). Core-shell insulin/vildagliptin-loaded nanofibers extend the drug delivery of insulin and vildagliptin and accelerate the repair of wounds associated with diabetes.

Electrospun fibers as carriers for topical drug delivery and release in skin bandages and patches for atopic dermatitis treatment

The skin is a complex layer system and the most important barrier between the environment and the organism. In this review, we describe some widespread skin problems, with a focus on eczema, which are affecting more and more people all over the world. Most of treatment methods for atopic dermatitis (AD) are focused on increasing skin moisture and protecting from bacterial infection and external irritation. Topical and transdermal treatments have specific requirements for drug delivery. Breathability, flexibility, good mechanical properties, biocompatibility, and efficacy are important for the patches used for skin. Up to today, electrospun fibers are mostly used for wound dressing. Their properties, however, meet the requirements for skin patches for the treatment of AD. Active agents can be incorporated into fibers by blending, coaxial or side-by-side electrospinning, and also by physical absorption post-processing. Drug release from the electrospun membranes is affected by drug and polymer properties and the technique used to combine them into the patch. We describe in detail the in vitro release mechanisms, parameters affecting the drug transport, and their kinetics, including theoretical approaches. In addition, we present the current research on skin patch design. This review summarizes the current extensive know-how on electrospun fibers as skin drug delivery systems, while underlining the advantages in their prospective use as patches for atopic dermatitis. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Electrospun Nanofiber Composites for Drug Delivery: A Review on Current Progresses

A medication’s approximate release profile should be sustained in order to generate the desired therapeutic effect. The drug’s release site, duration, and rate must all be adjusted to the drug’s therapeutic aim. However, when designing drug delivery systems, this may be a considerable hurdle. Electrospinning is a promising method of creating a nanofibrous membrane since it enables drugs to be placed in the nanofiber composite and released over time. Nanofiber composites designed through electrospinning for drug release purposes are commonly constructed of simple structures. This nanofiber composite produces matrices with nanoscale fiber structure, large surface area to volume ratio, and a high porosity with small pore size. The nanofiber composite’s large surface area to volume ratio can aid with cell binding and multiplication, drug loading, and mass transfer processes. The nanofiber composite acts as a container for drugs that can be customized to a wide range of drug release kinetics. Drugs may be electrospun after being dissolved or dispersed in the polymer solution, or they can be physically or chemically bound to the nanofiber surface. The composition and internal structure of the nanofibers are crucial for medicine release patterns.

A novel multi-target strategy for Alzheimer's disease treatment via sublingual route: Donepezil/memantine/curcumin-loaded nanofibers

Drug delivery systems that not only show efficacy through multiple therapeutic pathways but also facilitate patient drug use and exhibit a high bioavailability profile represent a promising strategy in the treatment of Alzheimer's disease (AD). Here, donepezil (DO)/memantine (MM)/curcumin (CUR)-loaded electrospun nanofibers (NFs) were produced for the treatment of AD. DSC, XRD, and FT-IR studies demonstrated the complete incorporation of the drug into PVA/PVP NFs. The disintegration profile was improved by loading the drugs in PVA/PVP with fast wetting (less than 1 s), the start of disintegration (21 s), and dispersion in 110 s. The desired properties for sublingual application were achieved with the dissolution of NFs in 240 s. The cell viability in DO/MM/CUR-loaded NFs was similar to the control group after 48 h in the cell culture. DO/MM/CUR-loaded NFs enhanced the expressions of BDNF (13.5-fold), TUBB3 (8.9-fold), Neurog2 (5.6-fold), NeuroD1 (5.8-fold), Nestin (166-fold), and GFAP (115-fold). DO/MM/CUR-loaded NFs and powder of these drugs contained in these fibers were daily administered sublingually to intracerebroventricular-streptozotocin (icv-STZ) treated rats. DO/MM/CUR-loaded NFs treatment improved the short-term memory damage and enhanced memory, learning ability, and spatial exploration talent. Results indicated that the levels of Aβ, Tau protein, APP, GSK-3β, AChE, and TNF-α were significantly decreased, and BDNF was increased by DO/MM/CUR-loaded NFs treatment compared to the AD group. In the histopathological analysis of the hippocampus and cortex, neuritic plaques and neurofibrillary nodes were not observed in the rats treated with DO/MM/CUR-loaded NFs. Taken together, the sublingual route delivery of DO/MM/CUR-loaded NFs supports potential clinical applications for AD.

Advancement of Nanofibrous Mats and Common Useful Drug Delivery Applications

Electrospinning enables simple and cost-effective production of polymer nanofibers from different polymer materials. Drug delivery systems are capable of achieving maximum drug treatment benefits by significantly reducing adverse complications. Electrospun nanofibers have recently attracted considerable attention owing to their distinctive properties, including flexibility and biocompatibility. The implementation of functional constituents within nanostructure fibers blends is an effective technique for the administration of a variety of drugs in animal research, broadening the nanofiber capability and reliability. The nanofibrous mesh and its various application purposes are discussed in terms of a summary of recent research, emphasizing the ease of streaming and a large number of combinations of this approach, which could lead to a breakthrough in targeted therapy.

Development of an Electrospun Patch Platform Technology for the Delivery of Carvedilol in the Oral Mucosa

The work herein presented aims to develop and characterize carvedilol (CVD) releasable non-water-soluble monolayers and a multilayer patch made of ultrathin micron and submicron fibers for drug delivery into the sublingual mucosa. Firstly, the developed formulations containing CVD within different biopolymers (PDLA, PCL, and PHB) were characterized by scanning electron microscopy (SEM), attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), and for their in vitro drug release. SEM micrographs assessed the fiber morphology attained by adding carvedilol. ATR-FTIR spectra revealed good chemical compatibility between CVD and the tested biopolymers, whereas DSC and WAXS confirmed that CVD was in an amorphous state within the biopolymeric fibers. In vitro release studies showed enhanced CVD release kinetics from the electrospun biopolymer monolayers compared to the dissolution rate of the commercial form of the pure drug, except for the slow-releasing PDLA fibers. Finally, the selected CVD-loaded layer, i.e., electrospun PHB, was built into a three-layer patch to tackle mucosa adhesion and unidirectional release, while retaining the enhanced release kinetics. The patch design proposed here further demonstrates the potential of the electro-hydrodynamic processing technology to render unique mucoadhesive controlled delivery platforms for poorly water-soluble drugs.

Reactive Magnetron Plasma Modification of Electrospun PLLA Scaffolds with Incorporated Chloramphenicol for Controlled Drug Release

Surface modification with the plasma of the direct current reactive magnetron sputtering has demonstrated its efficacy as a tool for enhancing the biocompatibility of polymeric electrospun scaffolds. Improvement of the surface wettability of materials with water, as well as the formation of active chemical bonds in the near-surface layers, are the main reasons for the described effect. These surface effects are also known to increase the release rate of drugs incorporated in fibers. Herein, we investigated the effect of plasma modification on the chloramphenicol release from electrospun poly (lactic acid) fibrous scaffolds. Scaffolds with high-50 wt./wt.%-drug content were obtained. It was shown that plasma modification leads to an increase in the drug release rate and drug diffusion coefficient, while not deteriorating surface morphology and mechanical properties of scaffolds. The materials' antibacterial activity was observed to increase in the first day of the experiment, while remaining on the same level as the unmodified group during the next six days. The proposed technique for modifying the surface of scaffolds will be useful for obtaining drug delivery systems with controlled accelerated release, which can expand the possibilities of local applications of antibiotics and other drugs.

Effects of drug concentration and PLGA addition on the properties of electrospun ampicillin trihydrate-loaded PLA nanofibers

The aim of this study was to produce ampicillin trihydrate-loaded poly(lactic acid) (PLA) and PLA/poly(lactic-co-glycolic acid) (PLA/PLGA) polymeric nanofibers via electrospinning using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as the solvent for local application in tissue engineering. The effects of ampicillin trihydrate concentration (4-12%) and addition of PLGA (20-80%) on the spinnability of the solutions, morphology, average nanofiber diameter, encapsulation efficiency, drug release, and mechanical properties of PLA and PLA/PLGA nanofibers were examined. All nanofibers were bead-free and uniform. They had favorable encapsulation efficiency (approx. 90%) and mechanical properties. The increase in the amount of ampicillin trihydrate caused an increase in the diameter and burst effect of the nanofibers. The drug release ended on the 7th and 3rd day with nanofibers containing 4% and 12% of drug, respectively. The prolonged and controlled drug release for ten days was obtained with nanofibers containing 8% of drug. Thus, the ideal drug concentration was determined to be 8%. Nanofibers containing PLA/PLGA had a larger diameter than those including PLA. In addition, both the strength and elongation of nanofibers decreased depending on the increase in nanofiber size with the addition of PLGA, increased amount of drug, and ratios of PLGA. Drug release studies showed that PLA/PLGA nanofibers exhibited a lower burst effect and a decrease in drug release when compared to PLA nanofibers. Finally, PLA/PLGA nanofibers can be produced with enhanced encapsulation efficiency and mechanical properties, resulting in controlled and tailored release of ampicillin trihydrate for at least ten days. In conclusion, it was demonstrated that the addition of PLGA in different ratios and the amount of drug can be manipulated to obtain the desired properties (average nanofiber diameter, morphology, in vitro drug release, and mechanical properties) of PLA nanofibers.

Nanotechnology Based Approaches in Phage Therapy: Overcoming the Pharmacological Barriers

With the emergence and spread of global antibiotic resistance and the need for searching safer alternatives, there has been resurgence in exploring the use of bacteriophages in the treatment of bacterial infections referred as phage therapy. Although modern phage therapy has come a long way as demonstrated by numerous efficacy studies but the fact remains that till date, phage therapy has not received regulatory approval for human use (except for compassionate use).Thus, to hit the clinical market, the roadblocks need to be seriously addressed and gaps mended with modern solution based technologies. Nanotechnology represents one such ideal and powerful tool for overcoming the pharmacological barriers (low stability, poor in-vivo retention, targeted delivery, neutralisation by immune system etc.) of administered phage preparations.In literature, there are many review articles on nanotechnology and bacteriophages but these are primarily focussed on highlighting the use of lytic and temperate phages in different fields of nano-medicine such as nanoprobes, nanosensors, cancer diagnostics, cancer cell targeting, drug delivery through phage receptors, phage display etc. Reviews specifically focused on the use of nanotechnology driven techniques strictly to improve phage therapy are however limited. Moreover, these review if present have primarily focussed on discussing encapsulation as a primary method for improving the stability and retention of phage(s) in the body.With new advances made in the field of nanotechnology, approaches extend from mere encapsulation to recently adopted newer strategies. The present review gives a detailed insight into the more recent strategies which include 1) use of lipid based nano-carriers (liposomes, transfersomes etc.) 2) adopting microfluidic based approach, surface modification methods to further enhance the efficiency and stability of phage loaded liposomes 3) Nano- emulsification approach with integration of microfluidics for producing multiple emulsions (suitable for phage cocktails) with unique control over size, shape and drop morphology 4) Phage loaded nanofibers produced by electro-spinning and advanced core shell nanofibers for immediate, biphasic and delayed release systems and 5) Smart release drug delivery platforms that allow superior control over dosing and phage release as and when required. All these new advances are aimed at creating a suitable housing system for therapeutic bacteriophage preparations while targeting the multiple issues of phage therapy i.e., improving phage stability and titers, improving in-vivo retention times, acting as suitable delivery systems for sustained release at target site of infection, improved penetration into biofilms and protection from immune cell attack. The present review thus aims at giving a complete insight into the recent advances (2010 onwards) related to various nanotechnology based approaches to address the issues pertaining to phage therapy. This is essential for improving the overall therapeutic index and success of phage therapy for future clinical approval.

Encapsulation of Pharmaceutical and Nutraceutical Active Ingredients Using Electrospinning Processes

Electrospinning is an inexpensive and powerful method that employs a polymer solution and strong electric field to produce nanofibers. These can be applied in diverse biological and medical applications. Due to their large surface area, controllable surface functionalization and properties, and typically high biocompatibility electrospun nanofibers are recognized as promising materials for the manufacturing of drug delivery systems. Electrospinning offers the potential to formulate poorly soluble drugs as amorphous solid dispersions to improve solubility, bioavailability and targeting of drug release. It is also a successful strategy for the encapsulation of nutraceuticals. This review aims to briefly discuss the concept of electrospinning and recent progress in manufacturing electrospun drug delivery systems. It will further consider in detail the encapsulation of nutraceuticals, particularly probiotics.

Long-acting implantable dosage forms containing paliperidone palmitate obtained by 3D printing

In this work, the versatility of pressure extrusion-based printing (PEBP) was used as 3D printing process to create long-acting implantable dosage forms. Different release profiles were achieved based on the drug concentration, the way of preparation and the design of the final implants. Polycaprolactone (PCL) was used as the polymer to sustain the release of the loaded drug. Paliperidone palmitate (PP), a BCS Class II drug, used in the treatment of schizophrenia, was used as the model drug. Two PP concentrations (e.g. 5 and 10% w/w) as well as two methods of preparation before the 3D printing process, mortar and pestle and cryogenic milling, were evaluated. The amorphous state of PP was obtained by using cryogenic milling and it was maintained after printing. Two designs were printed by PEBP, a ring and a disk, to evaluate their impact on the release profile of PP. During the in vitro dissolution tests, the implant design, the amount of PP, as well as the crystalline or amorphous state of PP have shown to influence the drug release profile. During the successive steps of preparation of the long-acting implants, blends and raw materials were characterized by DSC and XRD.

Hydrophilic nanofibers as a supersaturating delivery system for carvedilol

Polymer nanofibers represent a promising delivery system for poorly water-soluble drugs; however, their supersaturating potential has not been explored yet. Here, carvedilol-loaded nanofibers based on poly(ethyleneoxide) and on amphiphilic block copolymer poloxamer 407 were produced by electrospinning. These nanofibers provided high carvedilol loading and improved dissolution of carvedilol. Their dissolution resulted in a supersaturated system that was not stable, and thus to avoid carvedilol precipitation, hydroxypropyl methylcelluloses or polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus) were additionally incorporated into the nanofibers. The morphology of the electrospun product was not affected by incorporation of carvedilol and the polymer precipitation inhibitors, as shown by scanning electron microscopy. The hydroxypropyl methylcelluloses were not effective polymer precipitation inhibitors for carvedilol. Incorporation of Soluplus significantly extended the duration of carvedilol supersaturation (>24 h) compared to the dissolution of nanofibers without Soluplus. Moreover, after 1 h of dissolution, incorporation of Soluplus into the nanofibers provided significantly higher carvedilol concentration (94.4 ± 2.5 μg/mL) compared to the nanofibers without Soluplus (32.7 ± 5.8 μg/mL), the polymer film (24.0 ± 2.2 μg/mL), and the physical mixture (3.3 ± 0.4 μg/mL). Thus, this study shows the great potential for hydrophilic nanofibers as a delivery system for sustained carvedilol supersaturation.

Ring-opening polymerization of ε-caprolactone initiated by tin(II) octoate/n-hexanol: DSC isoconversional kinetics analysis and polymer synthesis

The kinetics of ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) initiated by 1.0, 1.5 and 2.0 mol% of stannous(II) octoate/n-hexanol (Sn(Oct)₂/n-HexOH) wase successfully studied by non-isothermal differential scanning calorimetry (DSC) at heating rates of 5, 10, 15 and 20 °C/min. The DSC polymerization kinetic parameters of ε-CL were calculated using differential (Friedman) and integral isoconversional methods (Kissinger-Akahira-Sunose, KAS). The average activation energy (E_a ) values obtained from Friedman and KAS methods were in the range of 64.9-70.5 kJ/mol and 64.9-80.4 kJ/mol, respectively. The values of frequency factor (A) were determined from model fitting method using Avrami-Erofeev reaction model. The average values of A for the ROP of ε-CL initiated by 1.0, 1.5 and 2.0 mol% of Sn(Oct)₂/n-HexOH (1:2) were 7.3x10⁷, 2.8x10⁶ and 1.2x10⁶ min^-1, respectively. From kinetics studied, the polymerization rate of ε-CL increased with increasing initiator concentration. The performance of Sn(Oct)₂/n-HexOH in the synthesis of poly(ε-caprolactone) (PCL) was investigated by bulk polymerization at temperatures of 140, 160 and 180 °C. Sn(Oct)₂/n-HexOH (1:2) could produce high number average molecular weight ( M n ‾ = 9.0 × 10⁴ g/mol) and %yield (89%) of PCL in a short period of time at Sn(Oct)₂ concentration of 0.1 mol% and temperature of 160°C. The mechanism of the ROP of ε-CL with Sn(Oct)₂/n-HexOH was proposed through the coordination-insertion mechanism.

Reinforced electrospun nanofiber composites for drug delivery applications

Electrospun technology becomes a valuable means of fabricating functional polymeric nanofibers with distinctive morphological properties for drug delivery applications. Nanofibers are prepared from the polymer solution, which allows the direct incorporation of therapeutics such as small drug molecules, genes, and proteins by merely mixing them into the polymeric solution. Due to their biocompatibility, adhesiveness, sterility, and efficiency in delivering diverse cargoes, electrospun nanofibers have gained much attention. This review discusses the capabilities of the electrospun nanofibers in delivering different therapeutics like small molecules, genes, and proteins to their desired target site for treating various ailments. The potential of nanofibers in administering through multiple administration routes and the associated challenges has also been expounded along with a cross-talk about the commercial products of nanofibers for biomedical applications.

Preparation of a Composite Scaffold from Polycaprolactone and Hydroxyapatite Particles by Means of Alternating Current Electrospinning

This research involved the production of polycaprolactone fiber layers via the alternating current electrospinning method. To construct the micro/nanofiber scaffold, mixtures of two molecular weight solutions, M _n 45 000 and M _n 80 000, were spun in differing proportions in a solvent system containing acetic acid, formic acid, and acetone in a ratio of 1:1:1. The composite fiber materials with hydroxyapatite particles were prepared from a solution that combined the different molecular weight solutions at a ratio of 1:3. The study resulted in the preparation of fiber layers containing 0, 5, 10, and 15% (wt) hydroxyapatite particles from the dry mass of the polycaprolactone. The strength, wettability, and surface energy of the composite materials were examined, and the results demonstrated that hydroxyapatite affects the fiber diameters, strength, and surface energy and, thus, the wettability of the fiber layers. The fibrous layers produced were further tested for cytotoxicity and cell viability and proliferation. The results obtained thus strongly indicate that the resulting bulky micro/nanofiber layers are suitable for further testing with a view to their eventual application in the field of bone tissue engineering.

Electrospun fixed dose combination fibers for the treatment of cardiovascular disease

Fixed dose combinations (FDCs) offer an accessible way to simplify complex therapeutic regimens by the simultaneous presentation of multiple drugs in a single entity to the patient. However, encapsulation of hydrophobic drugs into FDCs possess a number of technical challenges. Electrospinning comprises a convenient way to incorporate multiple hydrophobic drugs into a single formulation in a single step, via the use of an appropriate organic solvent system during fabrication. In this study, we report a series of novel fiber formulations comprising ethyl cellulose loaded with two hydrophobic drugs, spironolactone and nifedipine, either individually or in combination. The drugs are found to be present in the fibers in the form of amorphous solid dispersions, and these are stable at room temperature for 4 months. The products showed extended release profiles over more than 30 h. This formulation strategy offers potential to manage chronic cardiovascular conditions and overcome patient related non-adherence by providing a simplified treatment model.

Fabrication and characterization of electrospun biopolyester/gelatin nanofibers

Poly(ω-pentadecalactone-co-ε-caprolactone) copolymer (PDL-CL) is an enzymatically synthesized aliphatic biopolyester, which has been participated in a nanofibrous structure for the first time. Electrospinning of this synthetic polymer by blending with a natural polymer such as gelatin (Gel) could provide new characteristics that are significant for biomedical applications, such as drug delivery, wound healing, and tissue engineering. In the present study, PDL-CL/Gel nanofibrous membranes were successfully produced and characterized. The average diameter of nanofibers was 305.0 ± 45.5 nm that may be beneficial in applications mentioned above. In order to increase hydrolytic resistance, cross-linking with glutaraldehyde vapor was applied. Cross-linking for 2 h was enough to obtain a nanofibrous membrane that was able to resist in pH 7.4 phosphate buffered saline for 30 days. In addition, contact angle measurement results had shown that, cross-linked nanofibrous membrane had good wettability, which is a required specification to be applied in biomedical field. Hence, this study provides an overview on fabrication of fine PDL-CL/Gel nanofibers, which may have potential to be used in biomedical area.

Fast Dissolving Electrospun Nanofibers Fabricated from Jelly Fig Polysaccharide/Pullulan for Drug Delivery Applications

The fast-dissolving drug delivery systems (FDDDSs) are developed as nanofibers using food-grade water-soluble hydrophilic biopolymers that can disintegrate fast in the oral cavity and deliver drugs. Jelly fig polysaccharide (JFP) and pullulan were blended to prepare fast-dissolving nanofiber by electrospinning. The continuous and uniform nanofibers were produced from the solution of 1% (w/w) JFP, 12% (w/w) pullulan, and 1 wt% Triton X-305. The SEM images confirmed that the prepared nanofibers exhibited uniform morphology with an average diameter of 144 ± 19 nm. The inclusion of JFP in pullulan was confirmed by TGA and FTIR studies. XRD analysis revealed that the increased crystallinity of JFP/pullulan nanofiber was observed due to the formation of intermolecular hydrogen bonds. The tensile strength and water vapor permeability of the JFP/pullulan nanofiber membrane were also enhanced considerably compared to pullulan nanofiber. The JFP/pullulan nanofibers loaded with hydrophobic model drugs like ampicillin and dexamethasone were rapidly dissolved in water within 60 s and release the encapsulants dispersive into the surrounding. The antibacterial activity, fast disintegration properties of the JFP/pullulan nanofiber were also confirmed by the zone of inhibition and UV spectrum studies. Hence, JFP/pullulan nanofibers could be a promising carrier to encapsulate hydrophobic drugs for fast-dissolving/disintegrating delivery applications.

Biosensors for the Detection of Bacterial and Viral Clinical Pathogens

Biosensors are measurement devices that can sense several biomolecules, and are widely used for the detection of relevant clinical pathogens such as bacteria and viruses, showing outstanding results. Because of the latent existing risk of facing another pandemic like the one we are living through due to COVID-19, researchers are constantly looking forward to developing new technologies for diagnosis and treatment of infections caused by different bacteria and viruses. Regarding that, nanotechnology has improved biosensors' design and performance through the development of materials and nanoparticles that enhance their affinity, selectivity, and efficacy in detecting these pathogens, such as employing nanoparticles, graphene quantum dots, and electrospun nanofibers. Therefore, this work aims to present a comprehensive review that exposes how biosensors work in terms of bacterial and viral detection, and the nanotechnological features that are contributing to achieving a faster yet still efficient COVID-19 diagnosis at the point-of-care.

Synthesis of Biocompatible and Environmentally Nanofibrous Mats Loaded with Moxifloxacin as a Model Drug for Biomedical Applications

Biopolymeric chitosan structure (Cs) is rationally investigated owing to its potentiality in pharmaceutical applications. The synthetic routes of biomimetic Cs-based blend electrospun nanofibers were studied. Herein, biocompatible crosslinked electrospun polyvinyl alcohol (PVA)/Cs-reduced gold nanoparticles (Cs(Rg))/β-CD (beta-cyclodextrin) in pure water were fabricated. To this end, supportive PVA as a carrier, Cs bio modifier, and gold reductant and β-CD as smoother, inclusion guest molecule, and capping agent exhibit efficient entrapment of moxifloxacin (Mox) and consequently accelerate release. Besides, PVA/Cs(Rg)/β-CD paves towards controlled drug encapsulation-release affinity, antimicrobial, and for wound dressing. Without losing the nanofiber structure, the webs prolonged stability for particle size and release content up to 96.4%. The synergistic effect of the nanoformulation PVA/Cs(Rg)/β-CD against pathogenic bacteria, fungus, and yeast, including Staphylococcus aureus, Escherichia coli, Candida albicans, and Aspergillus niger, posed clear zones up to 53 φmm. Furthermore, a certain combination of PVA/Cs (Rg)/β-CD showed a total antioxidant capacity of 311.10 ± 2.86 mg AAE/g sample. In vitro cytotoxicity assay of HePG2 and MCF-7 NF6 can eradicate 34.8 and 29.3 µg/mL against selected cells.

Fabrication of tri-layered electrospun polycaprolactone mats with improved sustained drug release profile

Modulation of initial burst and long term release from electrospun fibrous mats can be achieved by sandwiching the drug loaded mats between hydrophobic layers of fibrous polycaprolactone (PCL). Ibuprofen (IBU) loaded PCL fibrous mats (12% PCL-IBU) were sandwiched between fibrous polycaprolactone layers during the process of electrospinning, by varying the polymer concentrations (10% (w/v), 12% (w/v)) and volume of coat (1 ml, 2 ml) in flanking layers. Consequently, 12% PCL-IBU (without sandwich layer) showed burst release of 66.43% on day 1 and cumulative release (%) of 86.08% at the end of 62 days. Whereas, sandwich groups, especially 12% PCLSW-1 & 2 (sandwich layers-1 ml and 2 ml of 12% PCL) showed controlled initial burst and cumulative (%) release compared to 12% PCL-IBU. Moreover, crystallinity (%) and hydrophobicity of the sandwich models imparted control on ibuprofen release from fibrous mats. Further, assay for cytotoxicity and scanning electron microscopic images of cell seeded mats after 5 days showed the mats were not cytotoxic. Nuclear Magnetic Resonance spectroscopic analysis revealed weak interaction between ibuprofen and PCL in nanofibers which favors the release of ibuprofen. These data imply that concentration and volume of coat in flanking layer imparts tighter control on initial burst and long term release of ibuprofen.

On-line dissolution analysis of multiple drugs encapsulated in electrospun nanofibers

Electrospun nanofiber is a very attractive material which can be used as the support to form multiple-drug dosage. Understanding the dissolution process of different active drug ingredients released from electrospun fibers is of great importance to control and evaluate the quality of medicated nanofibers. Here we present the first study of on-line automatic analysis of dissolution of multiple drugs in electrospun fiber mats. Single-needle electrospinning technology is utilized to combine polymers, hydrophilic polyvinylpyrrolidone (PVP) and hydrophobic polycaprolactone (PCL) as carrier to load three poorly water-soluble non-steroidal anti-inflammatory drugs (paracetamol, nimesulide, and ibuprofen). The loading of the drugs in PVP/PCL electrospun fibers are characterized by various techniques, including scanning electron microscopy, X-ray diffraction, Fourier infrared spectroscopy and differential scanning calorimetry. The in vitro dissolution is investigated by our home-made portable analyzer, which can simultaneously on-line determine multiple drugs released from the nanofibers by a single step. The analysis shows a wide linear detection range of the drugs with limit-of-detection (LOD) down to μg/mL-level. The dissolution profiles of three ingredients in nanofibers can be monitored every thirty seconds from the beginning to the end in the entire dissolution process from only one HSCE run. The kinetic information of the dissolution, including the dissolution curve, characteristic dissolution time and dissolution efficiency, is obtained and evaluated for different dissolution media, drug loading content and the ratio of PVP/PCL. Our study provides a promising method for rapid and accurate dissolution testing of nanofiber-based drugs, and would extend the applications of separation techniques in pharmaceutical analysis.

Production of Itraconazole Nanocrystal-Based Polymeric Film Formulations for Immediate Drug Release

In order to improve the solubility properties of BCS class II drug itraconazole, fast dissolving oral polymeric film formulations based on itraconazole nanocrystals were produced. Drug nanocrystals were manufactured by the wet pearl milling technique. In polymeric film formulations, hydroxypropyl methyl cellulose (HPMC) was used as a film forming polymer, and glycerin was used as a plasticizer. For nanocrystal suspensions and film formulations, thorough physicochemical characterization was performed, including particle sizing and size deviation, film appearance, weight variation, thickness, folding endurance, drug content uniformity, disintegration time, and dissolution profile. After milling, the nanoparticles were 369 nm in size with a PI value of 0.20. Nanoparticles were stable and after redispersion from film formulations, the particle size remained almost the same (330 nm and PI 0.16). The produced films were flexible, homogeneous, fast disintegrating, and drug release rate from both the nanosuspension and film formulations showed immediate release behavior. Based on the study, the film casting method for production of itraconazole nanocrystal based immediate release formulations is a good option for improved solubility.

Progress on the Fabrication and Application of Electrospun Nanofiber Composites

Nanofibers are one of the most attractive materials in various applications due to their unique properties and promising characteristics for the next generation of materials in the fields of energy, environment, and health. Among the many fabrication methods, electrospinning is one of the most efficient technologies which has brought about remarkable progress in the fabrication of nanofibers with high surface area, high aspect ratio, and porosity features. However, neat nanofibers generally have low mechanical strength, thermal instability, and limited functionalities. Therefore, composite and modified structures of electrospun nanofibers have been developed to improve the advantages of nanofibers and overcome their drawbacks. The combination of electrospinning technology and high-quality nanomaterials via materials science advances as well as new modification techniques have led to the fabrication of composite and modified nanofibers with desired properties for different applications. In this review, we present the recent progress on the fabrication and applications of electrospun nanofiber composites to sketch a progress line for advancements in various categories. Firstly, the different methods for fabrication of composite and modified nanofibers have been investigated. Then, the current innovations of composite nanofibers in environmental, healthcare, and energy fields have been described, and the improvements in each field are explained in detail. The continued growth of composite and modified nanofiber technology reveals its versatile properties that offer alternatives for many of current industrial and domestic issues and applications.

Multilayer Alginate-Polycaprolactone Electrospun Membranes as Skin Wound Patches with Drug Delivery Abilities

A multilayer nanofibrous membrane consisting of a layer of polycaprolactone and one of physically cross-linked alginate-embedding ZnO nanoparticles is prepared via electrospinning technique as potential wound healing patches with drug delivery capabilities. A washing-cross-linking protocol is developed to obtain stable materials at the same time removing poly(ethylene oxide), which was used here as a cospinning agent for alginate, without interfering with the membrane's peculiar nanofibrous structure. The mechanical behavior of the samples is assessed via a uniaxial tensile test showing appropriate resistance and manageability together with a good thermal stability as proved via thermogravimetric analysis. The polycaprolactone external layer enriches the samples with good liquid-repellent properties, whereas the alginate layer is able to promote tissue regeneration owing to its capability to promote cell viability and allow exudate removal and gas exchanges. Moreover, using methylene blue and methyl orange as model molecules, promising drug delivery abilities are observed for the mats. Indeed, depending on the nature and on the dye-loading concentration, the release kinetic can be easily tuned to obtain a slow controlled or a fast burst release. Consequently, the proposed alginate-polycaprolactone membrane represents a promising class of innovative, simple, and cost-effective wound healing patches appropriate for large-scale production.

Electrospun nanofibers: A nanotechnological approach for drug delivery and dissolution optimization in poorly water-soluble drugs

Electrospinning is a novel and sophisticated technique for the production of nanofibers with high surface area, extreme porous structure, small pore size, and surface morphologies that make them suitable for biomedical and bioengineering applications, which can provide solutions to current drug delivery issues of poorly water-soluble drugs. Electrospun nanofibers can be obtained through different methods asides from the conventional one, such as coaxial, multi-jet, side by side, emulsion, and melt electrospinning. In general, the application of an electric potential to a polymer solution causes a charged liquid jet that moves downfield to an oppositely charged collector, where the nanofibers are deposited. Plenty of polymers that differ in their origin, degradation character and water affinity are used during the process. Physicochemical properties of the drug, polymer(s), and solvent systems need to be addressed to guarantee successful manufacturing. Therefore, this review summarizes the recent progress in electrospun nanofibers for their use as a nanotechnological tool for dissolution optimization and drug delivery systems for poorly water-soluble drugs.

Mucoadhesive Electrospun Fibre-Based Technologies for Oral Medicine

Oral disease greatly affects quality of life, as the mouth is required for a wide range of activities including speech, food and liquid consumption. Treatment of oral disease is greatly limited by the dose forms that are currently available, which suffer from short contact times, poor site specificity, and sensitivity to mechanical stimulation. Mucoadhesive devices prepared using electrospinning offer the potential to address these challenges by allowing unidirectional site-specific drug delivery through intimate contact with the mucosa and with high surface areas to facilitate drug release. This review will discuss the range of electrospun mucoadhesive devices that have recently been reported to address oral inflammatory diseases, pain relief, and infections, as well as new treatments that are likely to be enabled by this technology in the future.

Coating biopolymer nanofibers with carbon nanotubes accelerates tissue healing and bone regeneration through orchestrated cell- and tissue-regulatory responses

Tailoring the surface of biomaterial scaffolds has been a key strategy to modulate the cellular interactions that are helpful for tissue healing process. In particular, nanotopological surfaces have been demonstrated to regulate diverse behaviors of stem cells, such as initial adhesion, spreading and lineage specification. Here, we tailor the surface of biopolymer nanofibers with carbon nanotubes (CNTs) to create a unique bi-modal nanoscale topography (500 nm nanofiber with 25 nm nanotubes) and report the performance in modulating diverse in vivo responses including inflammation, angiogenesis, and bone regeneration. When administered to a rat subcutaneous site, the CNT-coated nanofiber exhibited significantly reduced inflammatory signs (down-regulated pro-inflammatory cytokines and macrophages gathering). Moreover, the CNT-coated nanofibers showed substantially promoted angiogenic responses, with enhanced neoblood vessel formation and angiogenic marker expression. Such stimulated tissue healing events by the CNT interfacing were evidenced in a calvarium bone defect model. The in vivo bone regeneration of the CNT- coated nanofibers was significantly accelerated, with higher bone mineral density and up-regulated osteogenic signs (OPN, OCN, BMP2) of in vivo bone forming cells. The in vitro studies using MSCs could demonstrate accelerated adhesion and osteogenic differentiation and mineralization, supporting the osteo-promoting mechanism behind the in vivo bone forming event. These findings highlight that the CNTs interfacing of biopolymer nanofibers is highly effective in reducing inflammation, promoting angiogenesis, and driving adhesion and osteogenesis of MSCs, which eventually orchestrate to accelerate tissue healing and bone regeneration process. STATEMENT OF SIGNIFICANCE: Here we demonstrate that the interfacing of biopolymer nanofibers with carbon nanotubes (CNTs) could modulate multiple interactions of cells and tissues that are ultimately helpful for the tissue healing and bone regeneration process. The CNT-coated scaffolds significantly reduced the pro-inflammatory signals while stimulating the angiogenic marker expressions. Furthermore, the CNT-coated scaffolds increased the bone matrix production of bone forming cells in vivo as well as accelerated the adhesion and osteogenic differentiation of MSCs in vitro. These collective findings highlight that the CNTs coated on the biopolymer nanofibers allow the creation of a promising platform for nanoscale engineering of biomaterial surface that can favor tissue healing and bone regeneration process, through a series of orchestrated events in anti-inflammation, pro-angiogenesis, and stem cell stimulation.

Polyelectrolyte-surfactant-complex nanoparticles as a delivery platform for poorly soluble drugs: A case study of ibuprofen loaded cetylpyridinium-alginate system

Previously, we reported on the surfactant cetylpyridinium chloride (CPC) as a crosslinker of alginate for the formation of stable polyelectrolyte-surfactant-complex nanoparticles. Here, we evaluate this system for increased solubility of a poorly soluble drug. The aim was to use CPC for solubilisation of ibuprofen and to use the micellar associates formed for alginate complexation and nanoparticle formation. We acquired deeper insights into the entropy led interactions between alginate, CPC and ibuprofen. Stable nanoparticles were formed across limited surfactant-to-polyelectrolyte molar ratios, with ~150 nm hydrodynamic diameter, monodispersed distribution, and negative zeta potential (-40 mV), with 34% ibuprofen loading. Their structure was obtained using small-angle X-ray scattering, which indicated disordered micellar associates when ibuprofen was incorporated. This resulted in nanoparticles with a complex nanostructured composition, as shown by transmission electron microscopy. Drug release from ibuprofen-cetylpyridinium-alginate nanoparticles was not hindered by alginate, and was similar to the release kinetics from ibuprofen-CPC solubilisates. These innovative carriers developed as polyelectrolyte-surfactant complexes can be used for solubilisation of poorly soluble drugs, where the surfactant simultaneously increases the solubility of the drug at concentrations below its critical micellar concentration and crosslinks the polyelectrolyte to form nanoparticles.

Electrospun nanofibers for the delivery of active drugs through nasal, oral and vaginal mucosa: Current status and future perspectives

Transmucosal surfaces bypass many limitations associated with conventional drug delivery (oral and parenteral routes), such as poor absorption rate, enzymatic activity, acidic environment and first-pass metabolism occurring inside the liver. However, these surfaces have several disadvantages such as poor retention time, narrow absorption window and continuous washout of the drug by the surrounding fluids. Electrospun nanofibers with their unique surface properties and encapsulation efficiency may act as novel drug carriers to overcome the challenges associated with conventional drug delivery routes, so as to achieve desired therapeutic responses. This review article provides detailed information regarding the challenges faced in the mucosal delivery of drugs, and the use of nanofiber systems as an alternative to deliver drugs to the systemic circulation, as well as local drug administration. The physiological and anatomical features of different types of mucosal surfaces and current challenges are systematically discussed. We also address future considerations in the area of transmucosal delivery of some important drugs.

Electrospinning of linezolid loaded PLGA nanofibers: effect of solvents on its spinnability, drug delivery, mechanical properties, and antibacterial activities

Objective: The choice of a desirable solvent/solvent system is fundamental for optimization of electrospinning by altering the rheological and electrostatic properties of the polymer solutions.Methods: The effects of the solvents and their properties on the viscosity and spinnability of the polymer solutions and the diameter, morphology, in vitro drug release, drug release mechanisms, antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA) and mechanical properties of electrospun poly-(d,l-lactide-co-glycolide) (PLGA) nanofibers were investigated. Dichloromethane (DCM), dimethylformamide (DMF), various ratios of DCM:DMF, and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) were used as solvents.Results: Although solutions containing DCM/DMF alone were not spinnable, different ratios of DCM:DMF and HFIP were determined as suitable solvents to produce nanofibers because of high enough conductivity, viscosity, and low enough surface tension of the solutions. The DCM:DMF ratio was highly effective on viscosity, nanofiber diameter, morphology, and linezolid release rate. The viscosity of HFIP containing solution was higher and the obtained nanofibers were thicker and smoother with better mechanical properties. The release of nanofibers containing HFIP at a concentration of 10% w/v PLGA was more prolonged than nanofibers containing DCM:DMF mixture. The effect of linezolid content on nanofibers was also investigated. As the amount of linezolid increased, nanofiber diameter and drug release increased and bead formation was observed. While antibacterial activity with nanofibers for which DCM:DMF was used, lasted for 13 days, it was extended to 16 days in nanofibers for which HFIP was used.Conclusions: Type and ratio of the solvent system affected viscosity and spinnability of the solutions, the average nanofiber diameter, morphology, in vitro activity and mechanical properties of the obtained electrospun nanofibers.

Melt electrohydrodynamic 3D printed poly (ε-caprolactone)/polyethylene glycol/roxithromycin scaffold as a potential anti-infective implant in bone repair

Implanted scaffold or bone substitute is a common method to treat bone defects. However, the possible bone infection caused by orthopaedic surgery has created a challenging clinical problem and generally invalidate bone repair and regeneration. In this study, a poly (ε-caprolactone) (PCL)/polyethylene glycol (PEG)/roxithromycin (ROX) composite scaffold was prepared via melt electrohydrodynamic (EHD) 3D printing. Fourier transform infrared spectroscopy (FTIR) spectroscopy was performed to verify the existence of PEG and ROX in the scaffolds. By water contact angle measurement, the addition of both PEG and ROX was found to improve the hydrophilicity of the scaffolds. By in vitro drug release assay, the PCL/PEG/ROX scaffolds showed an initial burst drug release and subsequent long-term sustained release behaviour, which is favourable for the prevention and treatment of bone infections. The antibacterial assays against E. coli and S. aureus demonstrated that the composite scaffold with ROX possessed effective antibacterial activity, especially for S. aureus, the main cause of bone infection. The immunostaining and MTT assay with human osteoblast-like cells (MG63) indicated that cells showed good viability and growth on the scaffolds. Therefore, the melt EHD 3D printed PCL/PEG/ROX scaffold could be a promising anti-infective implant for bone tissue engineering.