Electrokinetic Amendment in Phytoremediation of Mixed Contaminated Soil

Evaluation of electrokinetic-assisted phytoremediation efficiency of dibutyl phthalate contaminated soil by maize (Zea mays L.) under different electric field intensities

The excessive accumulation of dibutyl phthalate (DBP) in soil poses a serious threat to soil ecosystems and crop safety production. Electrokinetic-assisted phytoremediation (EKPR) has been considered as a potential technology for remediating organic contaminated soils. In order to investigate the effect of different electric fields on removal efficiency of DBP, three kinds of electric fields were set up in this study (1 V·cm-1, 2 V·cm-1 and 3 V·cm-1). The results showed that 59 % of DBP in soil was removed by maize (Zea mays L.) within 20 d in low-intensity electric field (1 V·cm-1), and the accumulation of DBP in maize tissues decreased significantly compared to the non-electrified treatment group. Interestingly, it could be observed that the low-intensity electric field could maintain ion homeostasis and improve the photosynthetic efficiency of the plant, thereby relieving the inhibition of DBP on plant growth and increasing the chlorophyll content (94.1 %) of maize. However, the removal efficiency of DBP by maize decreased significantly under the medium-intensity (2 V·cm-1) and high-intensity electric field (3 V·cm-1). Moreover, the important roles of soil enzyme and rhizosphere bacterial community in low-electric field were also investigated and discussed. This study provided a new perspective for exploring the mechanism of removing DBP through EKPR.

Effect of AC electric field on enhancing phytoremediation of Cd-contaminated soils in different pH soils

To increase the efficiency of phytoremediation to clean up heavy metals in soil, assisted with alternating current (AC) electric field technology is a promising choice. Our experiments utilized the hyperaccumulator Sedum alfredii Hance and the fast-growing, high-biomass willow (Salix sp.). We investigated the efficiency of AC field combined with S. alfredii-willow intercropping for removing Cd from soils with different pH values. In the AC electric field treatment with S. alfredii-willow intercropping, the available Cd content in acidic soil increased by 50.00% compared to the control, and in alkaline soil, the increase was 100.00%. Furthermore, AC electric field promoted Cd uptake by plants in both acidic and alkaline soils, with Cd accumulation in the aboveground increased by 20.52% (P < 0.05) and 11.73%, respectively. In conclusion, the integration of AC electric fields with phytoremediation demonstrates significant favorable effectiveness.

Effects of soil moisture and an AC-electric field on the phytoremediation of the Cd-contaminated soil

Phytoremediation enhanced by electric field has been considered a green and low-cost technology for remediating heavy metal-contaminated soils. Soil moisture is a main environmental factor that affects Cd availability in the soil. However, the effects of soil moisture and AC-electric field on the remediation efficiency of willow (Salix spp.) and S. Alfredii interplanted together remain unclear. In the present study, we designed four treatments (60% soil field capacity, 60% soil field capacity + 0.5 V·cm-1 AC, 100% soil field capacity, 100% soil field capacity + 0.5 V·cm-1 AC) to explore the impacts of soil moisture and AC-electric field on soil Cd availability and Cd accumulation in plants. The results showed that the application of an AC-electric field significantly increased soil Cd availability by 20.9% and 10.8% under both 60% and 100% soil field capacity, respectively. Both high water with and without AC-electric field treatments reduced the proportion of acid-extractable and reducible Cd of soil but increased the proportion of residual Cd. Compared with the control, an AC-electric field with 60% soil field capacity significantly enhanced the biomass of S. Alfredii shoots by 31.2% and increased Cd accumulation in willow leaves and S. Alfredii shoots by 14.6% and 32.3%, respectively. In addition, the biomass production of willow was significantly enhanced but the uptake of Cd by willow was dramatically decreased under an AC-electric field with high water treatment. Therefore, these results suggest that the AC-electric field combined with 60% soil field capacity may be a more promising remediation technique to clean up the Cd-contaminated soil.

Restoration of degraded estuarine and marine ecosystems: A systematic review of rehabilitation methods in Europe

This article provides a comprehensive study of ecosystem rehabilitation methods widely used in the 21st century, focusing on Europe. The review covers the evolution and trends in scientific article publication, identification of European countries demonstrating high publication outputs, collaboration patterns, leading journals, and thematic areas. Additionally, it examines primary stressors in European aquatic ecosystems, and different methods and treatments commonly employed for remediation purposes. The analysis of selected articles revealed a significant increase in studies over time, driven by public awareness and financial incentives from national, European and global organizations. Italy, Portugal and Spain were the leading countries in degraded ecosystem rehabilitation studies, mainly focusing on remediating contaminated areas where metals were identified as the primary stressor (chemical pollution). Chemical remediation method emerged as the most used, closely followed by biological remediation method, which have gained prominence in recent years due to their ecological, economic, and social combined benefits. Furthermore, recent studies demonstrate a growing trend towards the combined use of more than one treatment/method to rehabilitate ecosystems, particularly with biological treatments. This combined approach has the potential for synergistic effects in achieving more effective rehabilitation and their sustainability in the long term, thus, a focus for future research.

Recent advances in phyto-combined remediation of heavy metal pollution in soil

The global industrialization and modernization have witnessed a rapid progress made in agricultural production, along with the issue of soil heavy metal (HM) pollution, which has posed severe threats to soil quality, crop yield, and human health. Phytoremediation, as an alternative to physical and chemical methods, offers a more cost-effective, eco-friendly, and aesthetically appealing means for in-situ remediation. Despite its advantages, traditional phytoremediation faces challenges, including variable soil physicochemical properties, the bioavailability of HMs, and the slow growth and limited biomass of plants used for remediation. This study presents a critical overview of the predominant plant-based HM remediation strategies. It expounds upon the mechanisms of plant absorption, translocation, accumulation, and detoxification of HMs. Moreover, the advancements and practical applications of phyto-combined remediation strategies, such as the addition of exogenous substances, genetic modification of plants, enhancement by rhizosphere microorganisms, and intensification of agricultural technologies, are synthesized. In addition, this paper also emphasizes the economic and practical feasibility of some strategies, proposing solutions to extant challenges in traditional phytoremediation. It advocates for the development of cost-effective, minimally polluting, and biocompatible exogenous substances, along with the careful selection and application of hyperaccumulating plants. We further delineate specific future research avenues, such as refining genetic engineering techniques to avoid adverse impacts on plant growth and the ecosystem, and tailoring phyto-combined strategies to diverse soil types and HM pollutants. These proposed directions aim to enhance the practical application of phytoremediation and its integration into a broader remediation framework, thereby addressing the urgent need for sustainable soil decontamination and protection of ecological and human health.

A new hyperaccumulator plant (Spergularia rubra) for the decontamination of mine tailings through electrokinetic-assisted phytoextraction

The screening of new effective metal hyperaccumulators is essential for the development of profitable phytoremediation projects in highly degraded environments such as mining areas. The goal of this research was to analyze the phytoextraction potential of the native plant Spergularia rubra to decontaminate and eventually recover metals (phytomining) from the mine tailings (belonging to an abandoned Pb/Zn Spanish mine) in which it grows spontaneously. To do so, the ability of this plant species to accumulate metals was evaluated both under natural conditions and through simple and electrokinetically assisted phytoextraction tests using alternating current and different combinations of voltage gradient (1/2 V cm-1) and application time (6/12 h per day). The complete duration of the greenhouse trial was 64 days, although alternating current was applied only during the last 14 days. The results obtained demonstrated the exceptional effectiveness of S. rubra for metal hyperaccumulation and growth without affecting toxicity in highly contaminated mining waste. Zn was the metal accumulated to a higher extent in the shoots, reaching concentrations up to 17,800 mg kg-1; Pb was mainly accumulated in the roots reaching a maximum concentration of 8709 mg kg-1. Cu and Cd were accumulated to a lesser extent but the bioconcentration factors were much >1. It has been proved that S. rubra is a hyperaccumulator species for Zn and Cd both in natural and greenhouse conditions and, very probably, Pb in wild conditions. The application of AC current did not significantly increase metal concentrations in plant tissues but it was able to increase the aerial biomass of S. rubra by 49.8 %. As a result, the phytoextraction yields of all metals were significantly improved as compared to wild conditions (up to 86 % for Zn). It could open new expectations about the economic viability of recovering high-value metals from mine tailings.

Lead dissociation and redistribution properties of actual contaminated farmland soil after long-term EKAPR treatment

Electrokinetic-assisted phytoremediation (EKAPR) is a potential technology much affected by the metal species and accessibility to plant roots. In this study, Pb-contaminated red soil was remediated with Sedum plumbizincicola to investigate the changes in soil pH, available nutrients, dissociation and redistribution of Pb under a long-term periodic reversal direct-current electric field. This approach could effectively activate soil P, K, organic matter (OM) and Pb, without significant soil acidification; the effect was positively correlated with applied voltage. Soil Pb can be continuously dissociated, migrated, and tended to accumulate in the middle region. The maximum Pb removal rate in the anodic section of the EKAPR system was 21.4%, and the aggregation rate in middle regions was 14.4%, higher than the available Pb content of the original soil. The Pb desorption in aqueous solution increased significantly with increasing voltage, irrespective of the solution pH. At a voltage of 20 V, the Pb cumulative desorption content reached 91.1 mg kg-1 (pH = 7), which was 2.7 times than that without electric field (33.2 mg kg-1). Compared to original soil (2.80 mg kg-1) and the control (14.54 mg kg-1), the available Pb in the anode section of EKAPR system (20.66 mg kg-1) increased by 637.9% and 42.1%, respectively. These results indicated that except for the indirect influence of soil pH changes, electrodynamics can directly promote the bioavailability and dissociation of Pb at the soil-water interface. This finding provides a new perspective for further studies on the mechanism of Pb speciation evolution and accumulation changes using EKAPR.

A review on the clean-up technologies for heavy metal ions contaminated soil samples

The soil contamination with heavy metal ions is one of the grave intricacies faced worldwide over the last few decades by the virtue of rapid industrialization, human negligence and greed. Heavy metal ions are quite toxic even at low concentration a swell as non-biodegradable in nature. Their bioaccumulation in the human body leads to several chronic and persistent diseases such as lung cancer, nervous system break down, respiratory problems and renal damage etc. In addition to this, the increased concentration of these metal ions in soil, beyond the permissible limits, makes the soil unfit for further agricultural use. Hence it is our necessity, to monitor the concentration of these metal ions in the soil and water bodies and adopt some better technologies to eradicate them fully. From the literature survey, it was observed that three main types of techniques viz. physical, chemical, and biological were employed to harness the heavy metal ions from metal-polluted soil samples. The main goal of these techniques was the complete removal of the metal ions or the transformation of them into less hazardous and toxic forms. Further the selection of the remediation technology depends upon different factors such as process feasibility/mechanism of the process applied, nature and type of contaminants, type and content of the soil, etc. In this review article, we have studied in detail all the three technologies viz. physical, chemical and biological with their sub-parts, mechanism, pictures, advantages and disadvantages.

Hormesis Responses of Growth and Photosynthetic Characteristics in Lonicera japonica Thunb. to Cadmium Stress: Whether Electric Field Can Improve or Not?

"Hormesis" is considered a dose-response phenomenon mainly observed at hyperaccumulator plants under heavy metals stress. In this study, the effects of electric fields on hormesis responses in Lonicera japonica Thunb. under cadmium (Cd) treatments were investigated by assessing the plant growth and photosynthetic characteristics. Under Cd treatments without electric fields, the parameters of plant growth and photosynthetic characteristics increased significantly when exposed to 5 mg L^-1 Cd, and decreased slightly when exposed to 25 mg L^-1 Cd, showing an inverted U-shaped trend, which confirmed that low concentration Cd has a hormesis effect on L. japonica. Under electric fields, different voltages significantly promoted the inverted U-shaped trend of the hormesis effect on the plant, especially by 2 V cm^-1 voltage. Under 2 V cm^-1 voltage, the dry weight of the root and leaf biomass exposed to 5 mg L^-1 Cd increased significantly by 38.38% and 42.14%, and the photosynthetic pigment contents and photosynthetic parameters were also increased significantly relative to the control, indicating that a suitable electric field provides better improvements for the hormesis responses of the plant under Cd treatments. The synergistic benefits of the 5 mg L^-1 Cd and 2 V cm^-1 electric field in terms of the enhanced hormesis responses of growth and photosynthetic characteristics could contribute to the promoted application of electro-phytotechnology.

The Role of pH, Electrodes, Surfactants, and Electrolytes in Electrokinetic Remediation of Contaminated Soil

Electrokinetic remediation has, in recent years, shown great potential in remediating polluted environments. The technology can efficiently remove heavy metals, chlorophenols, polychlorinated biphenyls, phenols, trichloroethane, benzene, toluene, ethylbenzene, and xylene (BTEX) compounds and entire petroleum hydrocarbons. Electrokinetic remediation makes use of electrolysis, electroosmosis, electrophoresis, diffusion, and electromigration as the five fundamental processes in achieving decontamination of polluted environments. These five processes depend on pH swings, voltage, electrodes, and electrolytes used in the electrochemical system. To apply this technology at the field scale, it is necessary to pursue the design of effective processes with low environmental impact to meet global sustainability standards. It is, therefore, imperative to understand the roles of the fundamental processes and their interactions in achieving effective and sustainable electrokinetic remediation in order to identify cleaner alternative solutions. This paper presents an overview of different processes involved in electrokinetic remediation with a focus on the effect of pH, electrodes, surfactants, and electrolytes that are applied in the remediation of contaminated soil and how these can be combined with cleaner technologies or alternative additives to achieve sustainable electrokinetic remediation. The electrokinetic phenomenon is described, followed by an evaluation of the impact of pH, surfactants, voltage, electrodes, and electrolytes in achieving effective and sustainable remediation.

Toxic effects of antimony in plants: Reasons and remediation possibilities-A review and future prospects

Antimony (Sb) is a dangerous heavy metal (HM) that poses a serious threat to the health of plants, animals, and humans. Leaching from mining wastes and weathering of sulfide ores are the major ways of introducing Sb into our soils and aquatic environments. Crops grown on Sb-contaminated soils are a major reason of Sb entry into humans by eating Sb-contaminated foods. Sb toxicity in plants reduces seed germination and root and shoot growth, and causes substantial reduction in plant growth and final productions. Moreover, Sb also induces chlorosis, causes damage to the photosynthetic apparatus, reduces membrane stability and nutrient uptake, and increases oxidative stress by increasing reactive oxygen species, thereby reducing plant growth and development. The threats induced by Sb toxicity and Sb concentration in soils are increasing day by day, which would be a major risk to crop production and human health. Additionally, the lack of appropriate measures regarding the remediation of Sb-contaminated soils will further intensify the current situation. Therefore, future research must be aimed at devising appropriate measures to mitigate the hazardous impacts of Sb toxicity on plants, humans, and the environment and to prevent the entry of Sb into our ecosystem. We have also described the various strategies to remediate Sb-contaminated soils to prevent its entry into the human food chain. Additionally, we also identified the various research gaps that must be addressed in future research programs. We believe that this review will help readers to develop the appropriate measures to minimize the toxic effects of Sb and its entry into our ecosystem. This will ensure the proper food production on Sb-contaminated soils.

Application for Ecological Restoration of Contaminated Soil: Phytoremediation

Nowadays, with the rapid development of industry and agriculture, heavy metal pollution is becoming more and more serious, mainly deriving from natural and man-made sources [...].

Advanced remediation of pyrene contaminated soil by double dielectric barrier discharge (DDBD) plasma and subsequent composting process

Due to increasing industrialization, soils are increasingly contaminated by polycyclic aromatics such as pyrene and need gentle treatment to keep the soil functioning. This study applied a double dielectric barrier discharge (DDBD) plasma reactor and composting reactor to remediate pyrene-contaminated soil. The effect of peak-to-peak applied voltages on the remediation efficiency of pyrene was investigated. The experimental results illustrate that pyrene remediation efficiency increased from 43% to 85% when the peak-to-peak applied voltage was increased from 28.0 to 35.8 kV. When using the combined method of DDBD and composting, 90-99% of pyrene could be removed, while a reduction of 76.5% was achieved using only composting, indicating the superiority of the combined system. Moreover, the authors could demonstrate that DDBD plasma treatment improves humification in the post-composting process as humic acid (HA) concentrations increased to 7.7 mg/g with an applied voltage of 35.8 kV; when composting was used as the sole treatment method, only 3.4 mg/g HA were produced. The microbial activity in the DDBD plasma-treated soil peaked on the 5th day and had a 2nd rise afterwards. The authors demonstrate that the combined technology of DDBD plasma and composting is a promising method for soil remediation with persistent organic pollutants. This treatment approach improves pollutant degradation efficiency and facilitates further humification, potentially restoring the function of contaminated soil. This approach could be considered a cost-effective and green strategy for soil remediation with persistent organic pollutants.

Electric Field-Enhanced Cadmium Accumulation and Photosynthesis in a Woody Ornamental Hyperaccumulator—Lonicera japonica Thunb

The multi-system of electro-phytotechnology using a woody ornamental cadmium (Cd) hyperaccumulator (Lonicera japonica Thunb.) is a new departure for environmental remediation. The effects of four electric field conditions on Cd accumulation, growth, and photosynthesis of L. japonica under four Cd treatments were investigated. Under 25 and 50 mg L⁻¹ Cd treatments, Cd accumulation in L. japonica was enhanced significantly compared to the control and reached 1110.79 mg kg⁻¹ in root and 428.67 mg kg⁻¹ in shoots influenced by the electric field, especially at 2 V cm⁻¹, and with higher bioaccumulation coefficient (BC), translocation factor (TF), removal efficiency (RE), and the maximum Cd uptake, indicating that 2 V cm⁻¹ voltage may be the most suitable electric field for consolidating Cd-hyperaccumulator ability. It is accompanied by increased root and shoots biomass and photosynthetic parameters through the electric field effect. These results show that a suitable electric field may improve the growth, hyperaccumulation, and photosynthetic ability of L.japonica. Meanwhile, low Cd supply (5 mg L⁻¹) and medium voltage (2 V cm⁻¹) improved plant growth and photosynthetic capacity, conducive to the practical application to a plant facing low concentration Cd contamination in the real environment.

Improvement of the electrokinetic fluxes by tall fescue: Alleviation of ion attenuation and maintainability of soil colloidal properties

In this study, we aimed to address the attenuation of electrokinetic fluxes that occur during plant (tall fescue)-based electrokinetic remediation of oil-contaminated soil. Following 60 days of treatment, the concentration of water-soluble cations and anions in the electrokinetics-assisted phytoremediation treatment (EK-P) were 20.03 mg/kg and 15.7 mg/kg higher than that in the electrokinetic (EK) treatment, respectively. At the electrode, plants were able to alleviate the ion aggregation effect caused by the electrokinetics, reduce the conversion of soluble ions to insoluble ones, and reduce the decay of water-soluble ions. In addition, the zeta potential of EK-P was 5.05 mV lower than that of EK. Plants maintained the stability of the soil colloid and reduced the movement of the peak of colloidal particle size from small to large particles, thereby reducing the amount of colloidal deposition. Finally, the EK-P current was 22.49% higher than that in EK while the electrokinetic effect was maintained. Meanwhile, electrokinetics increased plant biomass by 20.21%. Electrokinetics was found to create a synergy with the plants, an effect that eventually enhanced the rate of oil degradation.

Antimony contamination and its risk management in complex environmental settings: A review

Antimony (Sb) is introduced into soils, sediments, and aquatic environments from various sources such as weathering of sulfide ores, leaching of mining wastes, and anthropogenic activities. High Sb concentrations are toxic to ecosystems and potentially to public health via the accumulation in food chain. Although Sb is poisonous and carcinogenic to humans, the exact mechanisms causing toxicity still remain unclear. Most studies concerning the remediation of soils and aquatic environments contaminated with Sb have evaluated various amendments that reduce Sb bioavailability and toxicity. However, there is no comprehensive review on the biogeochemistry and transformation of Sb related to its remediation. Therefore, the present review summarizes: (1) the sources of Sb and its geochemical distribution and speciation in soils and aquatic environments, (2) the biogeochemical processes that govern Sb mobilization, bioavailability, toxicity in soils and aquatic environments, and possible threats to human and ecosystem health, and (3) the approaches used to remediate Sb-contaminated soils and water and mitigate potential environmental and health risks. Knowledge gaps and future research needs also are discussed. The review presents up-to-date knowledge about the fate of Sb in soils and aquatic environments and contributes to an important insight into the environmental hazards of Sb. The findings from the review should help to develop innovative and appropriate technologies for controlling Sb bioavailability and toxicity and sustainably managing Sb-polluted soils and water, subsequently minimizing its environmental and human health risks.

Influence of electrical fields enhanced phytoremediation of multi-metal contaminated soil on soil parameters and plants uptake in different soil sections

The influence of electrical fields on phytoremediation of multi-metal (Cd, Cu, and Zn) naturally contaminated soils has been investigated based on different soil sections. After ryegrass and hybrid penisetum were sowed for 30 d, electrical fields were applied during 30 days with the switching polarity every 30 min and continuing for 16 h d^-1. After electrokinetic (EK) assisted phytoremediation process, soil electrical conductivity (EC) in anode section and available soil potassium (K) in cathode section were obviously elevated. Plants biomass in middle and cathode sections were increased in both plants, especially in middle section the overall biomass of hybrid penisetum increased by 68.8%. The influence of electrical field on the contents of heavy metals in plants was different depending on the species of plants, kind of heavy metals and soil section. For Cd, Cu, and Zn co-contaminated soils, shoot metals accumulation in middle section in both plants were improved at least about 20% (with the exception of Zn in ryegrass). Electrical fields had the most significant effect on copper absorption by ryegrass and shoot Cu accumulation were elevated 32.5% in all the section. The soil EC maybe an important factor that affected electrical fields enhanced plants growth, plant metals concentrations and remediation efficiency.

Remediation of Metal/Metalloid-Polluted Soils: A Short Review

The contamination of soil by heavy metals and metalloids is a worldwide problem due to the accumulation of these compounds in the environment, endangering human health, plants, and animals. Heavy metals and metalloids are normally present in nature, but the rise of industrialization has led to concentrations higher than the admissible ones. They are non-biodegradable and toxic, even at very low concentrations. Residues accumulate in living beings and become dangerous every time they are assimilated and stored faster than they are metabolized. Thus, the potentially harmful effects are due to persistence in the environment, bioaccumulation in the organisms, and toxicity. The severity of the effect depends on the type of heavy metal or metalloid. Indeed, some heavy metals (e.g., Mn, Fe, Co, Ni) at very low concentrations are essential for living organisms, while others (e.g., Cd, Pb, and Hg) are nonessential and are toxic even in trace amounts. It is important to monitor the concentration of heavy metals and metalloids in the environment and adopt methods to remove them. For this purpose, various techniques have been developed over the years: physical remediation (e.g., washing, thermal desorption, solidification), chemical remediation (e.g., adsorption, catalysis, precipitation/solubilization, electrokinetic methods), biological remediation (e.g., biodegradation, phytoremediation, bioventing), and combined remediation (e.g., electrokinetic–microbial remediation; washing–microbial degradation). Some of these are well known and used on a large scale, while others are still at the research level. The main evaluation factors for the choice are contaminated site geology, contamination characteristics, cost, feasibility, and sustainability of the applied process, as well as the technology readiness level. This review aims to give a picture of the main techniques of heavy metal removal, also giving elements to assess their potential hazardousness due to their concentrations.

Remediation of heavy metal-contaminated soils by electrokinetic technology: Mechanisms and applicability

Electrokinetic remediation is a widely admitted technology forrectifying heavy metal-contaminated soil. Various technologies have been effectively developed to improve the metal removal efficiency of contaminated soil by electrochemical treatment alone or in combination with other remediation technologies. The working components for electrokinetic system, such as supplying power for electric fields, installing electrodes to generate electric fields, introducing electrolytes and other potential materials as a reactive medium are crucial. This review focuses on the specific functions of the working components in electrokinetic systems and their effects on the efficiency of heavy metal removal using electrochemical process. The advancements in working components were systematically summarized, such as power for electric fields, electrodes, electrolytes and ion exchange membrane, which have various impacts on the effectiveness of electrokinetic remediation. Additionally, this study introduces the application of dominating technologies at present coupled with electrokinetics. Overall, a judicious design and reasonable operation in the application of electrokinetic-coupled remediation should be implemented to enhance the removal process of heavy metals from contaminated soil.

Effects of electric fields on Cd accumulation and photosynthesis in Zea mays seedlings

Phytoremediation enhanced by electrokinetic has been considered as a potential technology for remediating contaminated soils. However, the effects of electric fields on Cd accumulation and photosynthesis in Zea mays (as a cathode) is still unclear. In the present study, Zea mays seedlings were exposed to various doses of Cd²⁺ (10, 50, 100 μM) to explore the impact of electric fields on Cd accumulation and photosynthesis of Zea mays. Results showed that upon exposure to a concentration of 100 μM Cd, electric fields significantly altered the Cd contents in maize shoots, whereas the concentration of 50 μM Cd increased the Cd contents in maize roots as well as affected the Cd transport from roots to shoots. Uptake index (UI) increased by 1.34%-66.16% with the application of electric fields. The variation of photosynthetic rates attributed to the open or closure of stoma was similar to the change of shoot fresh weight, particularly in maize exposed to high Cd stress. This study proposes a new technology in Cd phytoremediation and provides important information on physiological processes in maize when exposed to Cd stress and electric fields.

Enhancement of electrokinetic-bioremediation by ryegrass: Sustainability of electrokinetic effect and improvement of n-hexadecane degradation

Phytoremediation-assisted electrokinetic-bioremediation is a novel technology for soil remediation. We aimed to study the effects of a plant (ryegrass) on electrokinetic-bioremediation in n-hexadecane-contaminated soil. After treatment for 40 days, the n-hexadecane degradation ratio of electrokinetic-bioremediation-ryegrass (EK-Bio-RG) was 4.86% higher than that of electrokinetic-bioremediation (EK-Bio) (p < 0.05), with a maximum constant degradation rate (107.23 ± 4.62 mg kg^-1· d^-1). Owing to the improved electrical conductivity, 73.28% of the initial current was maintained on the 40th day in EK-Bio-RG, which was 1.62 times that in EK-Bio. Furthermore, ryegrass reduced the soil zeta potential, which indicated the alleviation of the soil electric double layer compression and prevention of the aggregation of small soil colloids into larger ones. The fine colloidal structure was conducive to mass transfer in electrokinetic-bioremediation. An analysis of the microbial community showed that the degradation of n-hexadecane was mainly attributable to gram-positive bacteria, and a new microbial community was gradually constructed in the rhizosphere, which still metabolized n-hexadecane. The results indicated that the sustainability of the electrokinetic effect was improved combined with ryegrass, and the harmonious micro-environment in the rhizosphere was constructed which furtherly optimized the EK-Bio technology to remediate organics-polluted soil.

Optimal voltage and treatment time of electric field with assistant Solanum nigrum L. cadmium hyperaccumulation in soil

We have attempted to obtain optimal conditions of direct current electrical field with switching polarity to increase Cd accumulation of the hyperaccumulator Solanum nigrum L. from soil. The effects of different voltages and treatment times on S. nigrum accumulating Cd were determined. The results showed that Cd concentration in S. nigrum under all electrical field conditions were significantly higher (p < 0.05) than that of the CK. The Cd concentration in shoot and root of treatment T3 (3 V cm^-1) were higher than the equal results of treatment T2 (2 V cm^-1) and T1 (1 V cm^-1) under the same condition of 6 h d^-1 treatment time. In different treatments concerning time of T1 (6 h d^-1), T4 (10 h d^-1) and T5 (14 h d^-1) under same voltage of 1 V cm^-1, the S. nigrum Cd concentration were with similar trend to the different voltage treatments (T5 with the highest Cd concentration). These results might be caused by positive change trends of pH, EC and extractable Cd concentration in soil. However, the S. nigrum biomasses of T3 were the lowest and the highest biomass happened in treatment of T4. Finally, the highest Cd accumulation in S. nigrm (μg pot^-1) was the T4 with the condition of 1 V cm^-1 and 10 h d^-1, which was also the optimal voltage and treatment time of the electric field. The optimal conditions were important references in the practice of combined use of electrokinetic remediation and phytoremediation.

Potential of Vetiver grass for the phytoremediation of a real multi-contaminated soil, assisted by electrokinetic

Phytoremediation assisted by electrokinetic is a potential technology for remediation of contaminated soil, but little is known about its application on real contaminated soils. This study aims to evaluate the Vetiver grass application on the electro-phytoremediation of a real contaminated soil around a metal smelter factory. Different types of the electric field (AC-DC), voltage gradient (1-2V/cm), saturation and unsaturation condition, and Eh-pH variation were investigated for Vetiver electro-phytoremediation performance. Vetiver grass had been grown for 21 days. Then three different voltage gradients (1, 2DCV/cm and 2ACV/cm) were applied for 8 h/d across the soil domain for the next 21 days in comparison with a control cell without electric field (PR). The results showed that despite the AC current application which induced small changes, the application of DC current significantly changed the Eh-pH values. The maximum accumulation of extractable metals in Vetiver grass occurred in 2DCV/cm that shows approximately 50% increase in comparison with the AC and PR cells. The presence of contaminants poisons the Vetiver in all cells and all plants under 2DCV/cm dried out at the end of the experiment. Despite the significant reduction of heavy metals, there was no noticeable phytoextraction due to the application of DC current. Therefore, DC current can be used for phytoremediation through phytostabilization. However, the overall metals uptake in plants shoots under AC treatment with BCF>1 was much higher than the PR and DC treatment. Considering the translocation rate and plants health, if the AC current is applied in a long treatment time, it could have better results in electro-phytoremediation of the Vetiver grass through phytoextraction process. However, the maximum removal of heavy metals was in the cathode part of the cell under 2DCV/cm that shows 65% improvement in comparison with the PR cell.

The effects of different electric fields and electrodes on Solanum nigrum L. Cd hyperaccumulation in soil

Electrokinetics is a new attempt of strengthening hyperaccumulator Solanum nigrum L. Cd extraction. The effects of different electric fields and electrodes on S. nigrum accumulating Cd among of four electric field conditions (1 V cm^-1) and two electrodes were determined. The results showed that the AC electric field significantly stimulated (p < 0.05) the growth of S. nigrum, and the biomass increased nearly by 40% compared with the control, while the DC electric field (including the switching polarity) had no significant effect. Electric field significantly increased (p < 0.05) Cd concentration in S. nigrum and the highest one was recorded for the DC electric field with switching polarity. S. nigrum Cd accumulation (ug pot^-1) was the highest under the AC electric field, which was nearly 70% higher compared to the control. The innovation found was that the role of biomass enhancement for S. nigrum accumulating Cd (ug pot^-1) was the first and increased Cd concentration was secondary under AC electrical field, which might be relative with S. nigrum is a weed species. Basically, there was no significant difference between the graphite and stainless steel electrode, but under AC electric field conditions, Cd accumulation of S. nigrum was significantly higher (p < 0.05) than stainless steel electrode, which is worthy of further revelation besides of statistic factor. In general, the accumulation (ug pot^-1) of Cd by S. nigrum was the highest under the AC electric field, which was a very important reference for the electrokinetic conditions to be used in the practice of phytoremediation.

Prospect of phytoremediation combined with other approaches for remediation of heavy metal-polluted soils

Accumulation of heavy metals in agricultural soils due to human production activities-mining, fossil fuel combustion, and application of chemical fertilizers/pesticides-results in severe environmental pollution. As the transmission of heavy metals through the food chain and their accumulation pose a serious risk to human health and safety, there has been increasing attention in the investigation of heavy metal pollution and search for effective soil remediation technologies. Here, we summarized and discussed the basic principles, strengths and weaknesses, and limitations of common standalone approaches such as those based on physics, chemistry, and biology, emphasizing their incompatibility with large-scale applications. Moreover, we explained the effects, advantages, and disadvantages of the combinations of common single repair approaches. We highlighted the latest research advances and prospects in phytoremediation-chemical, phytoremediation-microbe, and phytoremediation-genetic engineering combined with remediation approaches by changing metal availability, improving plant tolerance, promoting plant growth, improving phytoextraction and phytostabilization, etc. We then explained the improved safety and applicability of phytoremediation combined with other repair approaches compared to common standalone approaches. Finally, we established a prospective research direction of phytoremediation combined with multi-technology repair strategy.

Electro-enhanced leaching method for the mobilization of Cr(VI) in contaminated groundwater aquifer

Removal of hexavalent chromium [Cr(VI)] from soils and water has been widely studied for its high toxicity. Although leaching method is viewed as an effective approach to eliminate Cr(VI) and some studies attempted to enhance leaching performance via the external electric field, there is little knowledge about the influential factor in electro-leaching system on Cr(VI) removal performance. In this study, an electro-leaching technology was developed for removing Cr(VI) from groundwater aquifer to comprehensively discuss the correlation between the operational parameters and Cr(VI) removal efficiency. When the applied voltage was 20 V and the initial Cr(VI) concentration was 40 mg/kg, Cr(VI) removal efficiency achieved 99.9% in 120 min in the electro-leaching system, 15% higher than the system without the electric field. Cr(VI) removal efficiencies increased with the voltage demonstrating the significant enhancement of the electro-leaching method in removing Cr(VI). When Cr(VI) concentration climbed to 120 mg/kg, Cr(VI) removal efficiency remained above 85%. The effects of different voltages, Cr(VI) concentrations, pollutant distribution and salt content of leaching solution on the leaching effect were also investigated. Meanwhile, the relationship between the current intensity change and the amount of removed Cr(VI) during the electro-leaching process was first investigated, and the relevant model was fitted. There is a quadratic linear correlation between the amount of current change and the amount of removed Cr(VI). This novel electro-enhanced leaching method can effectively remove Cr(VI) from contaminated groundwater aquifer by enhancing the migration of charged contaminant ions during the leaching process, and it is worthy of further study of heavy metal remediation.

Effects of elevated CO2 on the phytoremediation efficiency of Noccaea caerulescens

Concentrations of atmospheric carbon dioxide have been continuously increasing, and more investigations are needed in regard to the responses of various plants to the corresponding climatic conditions. In particular, potential variations in phytoremediation efficiency induced by global warming have rarely been investigated. Objective of this research was to evaluate the changes in phytoremediation efficiency of Noccaea caerulescens exposed to different concentrations of CO₂. The concentrations of CO₂ in the elevated CO₂ treatments were adjusted to 550 ± 50 ppm to match the level of atmospheric CO₂ predicted in 2050-2070. Compared to ambient controls (400 ppm), biomass yields and metal concentrations of N. caerulescens increased under elevated CO₂ conditions, thus indicating that the phytoremediation efficiency of the species could increase in higher CO₂ environment. In addition, water soluble and exchangeable Pb and Cu concentrations in soils decreased under elevated CO₂ conditions, which reduced the leaching risks of the metals. The concentrations of malondialdehyde (MDA) of N. caerulescens decreased to different degrees with the increased CO₂ concentrations. The overall findings suggested that elevations in CO₂ can reduce the oxidative damage caused by metals in this species. The phytoremediation efficiency of N. caerulescens grown in multiple metal-enriched soils could be enhanced with global warming.

Potential of enhancing the phytoremediation efficiency of Solanum nigrum L. by earthworms

Contamination of the soil by Cadmium (Cd) is emerged as a critical environmental problem in China due to current urbanization and industrial activities that hinder the sustainable future development of agriculture. In this study, a system combined by earthworm and Solanum nigrum L. (S. nigurm) was designed for remediation of Cadmium from contaminated soils. The present study revealed that application of earthworm enhanced the biomass of S. nigrum by 61.71%, maxim; the Cd concentrations in the aboveground part of S. nigrum enhanced 35.8% when 50 g earthworm was added into each pot; the addition of earthworm also have some effect on the bio-concentration factor (BF) of S. nigrum while no effect was detected on the bio-transfer factor (TF). In addition, considering the accumulation of Cd by earthworm, the total amount of Cd extracted by the combined system enhanced 57.7% at least and 264.6% at the most, compared to the Cd extraction amount of S. nigrum alone. Generally, according to this study, the earthworm-S. nigrum system has the potential to be used for the remediation of Cd contaminated soils.

Enhancing the removal of atrazine from soils by electrokinetic-assisted phytoremediation using ryegrass (Lolium perenne L.)

Atrazine (ATR) continues being one of the most frequently detected pesticides in natural waters and soils. In this work, an electrokinetic-assisted phytoremediation pot test (EKPR) was performed for the remediation of an atrazine-spiked soil; a low electric voltage gradient (1 V cm^-1) with two different electric field operation times (6 and 24 h per day) was used in combination with ryegrass (Lolium perenne L.). EKPR increased up to 27% and 7% the overall ATR removal from soil as compared to natural attenuation and phytoremediation treatments, respectively. ATR soil concentration vs time curves were fitted to a pseudofirst-order kinetic equation, obtaining ATR half-life values of 8.2, 7.1 and 5.4 days for the treatments corresponding, respectively, to 0, 6 and 24 h day^-1 of electric current application. It clearly showed that the ATR removal from soils was enhanced by the electric field. ATR plant accumulation was significantly improved with respect to phytoremediation when the electric current was continuously applied throughout the experiment (24 h day^-1); most of the ATR residues were accumulated in the shoot biomass of the ryegrass plants.

Quantitative Assessment of Life Cycle Sustainability (QUALICS): Framework and its application to assess electrokinetic remediation

In recent years, the broader environmental impacts of remediation that arise from different remediation activities has drawn attention of practitioners, remediation design professionals and academicians to evaluate the net environmental benefit of environmental remediation projects. The main objective of this paper is to describe the Quantitative Assessment of Life Cycle Sustainability (QUALICS) framework, a new tool developed to strengthen decision-making in the selection of sustainable remedial technologies for the clean-up of contaminated sites. The proposed framework is a combination of two multi-criteria evaluation methods namely, the Integrated Value Model for Sustainable Assessment (MIVES) and Analytic Hierarchy Process (AHP). The QUALICS uses a multi-criteria assessment framework to support decision-making in remediation projects. A description of the methodology adopted for sustainability assessment of alternative remedial strategies using QUALICS framework is presented in this study. In addition, a case study is discussed to demonstrate the application of the QUALICS framework for the sustainability assessment of different remediation options for clean-up of a contaminated site. The case study involves sustainability assessment of different remediation options namely, electrokinetic remediation (EKR), excavation/disposal, and phytoremediation for remediation of a contaminated site. A sensitivity analysis was also performed for the EKR option by varying different parameters including electrode materials, energy source, electrolyte used, to analyze their influence on the sustainability of the alternative remedial options. The proposed framework can also be applied to any project in general to quantify and compare the sustainability indices of each of the alternative options considered and thereby identify the most sustainable option.

Remediation of Soil Polluted by Organic Compounds Through Chemical Oxidation and Phytoremediation Combined with DCT

Soils contaminated with organic substances is an important issue across Europe: In some areas, these are the main causes of pollution, or the second after contamination from waste disposal. This paper included an experimental application that compared three methods of remediation of contaminated sites, based on electric fields: A single treatment (electroremediation); and two combined treatments, phyto-electrochemical and electrooxidation (a combination of chemical treatment and a DCT-direct current technology). The contaminated soil was taken from a former industrial area devoted to oil refining, located between two roads: The one national and the other one for industrial use. Nine soil samples were collected at two depths (0.2 and 0.4 m). The initial characterization of the soil showed a density of 1.5 g/cm³ and a moisture of about 20%; regarding grain size, 50% of the soil had particles with a diameter less than 0.08 mm. The electrochemical treatment and electrooxidation had an efficiency of 20% while the two combined methods had efficiencies of 42.5% for electrooxidation (with H₂O₂) and 20% for phyto-electroremediation (phyto-ER) with poinsettias.

Interactions between electrokinetics and rhizoremediation on the remediation of crude oil-contaminated soil

An electrokinetics (EK)-enhanced phytoremediation system with ryegrass was constructed to remediate crude oil-polluted soil. The four treatments employed in this study included (1) without EK or ryegrass (CK-NR), (2) EK only (EK-NR), (3) ryegrass only (CK-R), and (4) EK and ryegrass (EK-R). After 30d of ryegrass growth, EK at 1.0 V·cm^-1 with polarity reversal (PR-EK) was supplied for another 30 d. The electric current was recorded during remediation. The pH, electrical conductivity, total petroleum hydrocarbon content (TPH), 16S rDNA, functional genes of AlkB, Nah, and Phe, DGGE, and dehydrogenase activity in soil were measured. The physical-chemical indexes of the plant included the length, dry mass, and chlorophyll contents of the ryegrass. Results showed that EK-R removed 18.53 ± 0.53% of TPH, which was higher than that of other treatments (13.34-14.31%). Meanwhile, the values of 16S rDNA, AlkB, Nah, Phe, and dehydrogenase activity in the bulk soil of EK-R all increased. Further clustering analysis with numbers of genes and DGGE demonstrated that EK-R was similar to the ryegrass rhizosphere soils in both EK-R and CK-R, while the EK treatment of EK-NR was similar to that of CK-NR without EK and ryegrass. These results indicate that the PR-EK treatment used in this experiment successfully enlarged the existing scale of the rhizosphere microorganisms, improved microbial activity and enhanced degradation of TPH.

Benefits of phytoremediation amended with DC electric field. Application to soils contaminated with heavy metals

The objective of this study was to determine the influence of the DC electric current in the physicochemical properties of soil. The electric current may induce changes in pH and electric conductivity that will be reflected in the distribution of the electric potential in the soil specimen. This information will be used for the development of a phytoremediation technology amended with electric current. The results showed that low or moderate voltage gradients (0.67 V/cm) induced small changes in physicochemical properties of soil that do not compromise plant survival. The selected voltage gradient was used in electro-phytoremediation tests in soil contaminated with heavy metals (Cd, Co, Cr, Cu, Pb and Zn). Two plants species adapted to the soil and climate conditions were selected (Brassica rapa L. subsp. rapa and Lolium perenne L.). The electric field enhanced the plant growing, mainly in L. perenne, and increased the phytoremediation of the 6 metals. Mixed cultures of the two plant species showed interesting results for large scale applications.

Analysis of the biological recovery of soils contaminated with hydrocarbons using an electrokinetic treatment

There are various treatments available for soil decontamination, including physical, chemical, thermal and biological treatments. However, when pollutants are persistent or toxic, it is often necessary to use an integrated set of techniques, to enhance decontamination effects. Integrated treatments typically include soil washing, heat treatment, stabilization processes or phytoremediation. The biological recovery of soils contaminated with hydrocarbons or heavy metals is a topic of central interest, since many treatment processes are often extremely aggressive and destroy the flora and microflora of the treated environments and can interfere with the natural properties of the soil. The objective of this work was to analyze the biological recovery of soils treated with an electrokinetic remediation (ER) method at laboratory, pilot and field-scale tests which measure the germination of seeds and growth of maize (Zea mays L.) using a 2D circular arrangement of electrodes (IrO₂-Ta₂O₅ |Ti| |Ti). The hydrocarbon removal rates obtained were greater than 80% for both the hydrocarbon's medium and heavy fractions; after this ER method was employed a phytoremediation treatment was also completed, using maize, which increased the removal rates up to 90%. A coupled electro- and phyto-remediation process was develop at the field-scale within an oil refinery property in Guanajuato, Mexico to demonstrate the successful biological recovery of soils contaminated with hydrocarbons as proved by the germination of seeds and growth of maize in the on-site fields.

Comparing the risk of metal leaching in phytoremediation using Noccaea caerulescens with or without electric field

Hyperaccumulators can mobilize all metals in soil through secreting exudates to form soluble compounds but only hyperaccumulate part of them. Metals that cannot be accumulated are defined as non-hyperaccumulated metals and can increase the leaching risk in phytoremediation. Cd and Zn hyperaccumulator Noccaea caerulescens (formerly Thlaspi caerulescens) was utilized to remediate multi-metal polluted soil in the present study, and the leaching risk of non-hyperaccumulated metals including Cu and Pb was investigated during the phytoremediation process. Comparing with Thlaspi arvense, a non-hyperaccumulator, N. caerulescens significantly decreased the concentrations of Cd and Zn in leachate gathered from precipitation simulation experiments without electric field, but meanwhile dramatically increased the concentrations of Cu and Pb in soil solution. Electric field with low (2 V) and moderate (4 V) voltages increased the biomass yield and metal uptake capacity of N. caerulescens simultaneously and therefore further reduced the concentrations of Cd and Zn in the leachate. Although the volume of leachate decreased significantly in pots with electric field, the leaching risk of Pb and Cu was deteriorated. Thus, decontaminating multi-metal polluted soil with electric field and hyperaccumulator should be conducted with caution due to potential secondary environmental risk caused by activated non-hyperaccumulated metals.

Comparing storage battery and solar cell in assisting Eucalyptus Globulus to phytoremediate soil polluted by Cd, Pb, and Cu

Metal decontamination and leaching alleviation capacity of Eucalyptus globulus with and without electric field were investigated using ICP-MS. The biomass production of the chosen plant increased from 0.87 kg in planting control without electrokinetic treatment to 1.16 and 1.42 kg in experiments with electric field supplied by storage battery and solar cell, respectively. Under the influence of electric field with a voltage of 6.5 V, significantly more Cd, Pb and Cu were extracted by the species. Precipitation simulation was performed to evaluate the capacity of battery and solar panel to intercept leaching. The total volume of leachate gathered from the control decreased from 1012 mL to 299 and 336 mL in containers treated by storage battery and solar cell, respectively. In addition to reduction of leachate, the leaching mass of Cd, Pb and Cu was decreased significantly by electric fields (both battery and solar cell) treatments. The effect of remediation and environmental risk alleviation by solar cell was comparable with storage battery, at least during the 30-day experimental period. On the basis of the present study, solar cell should be a suitable substitute for conventional power supply to improve metal polluted soil when considering phytoremediation efficiency and energy consumption.

The influence of an electric field on growth and trace metal content in aquatic plants

It is known that both natural and artificial electric fields (EF) affect plants physiological parameters as well as germination, growth and yield. The present article describes results of a preliminary experiment on the impact of electric field on aquatic plants biogeochemistry. The objective of the present study was the assessment of the influence exerted by the electric field on growth and trace metals content of Elodea canadensis. In a laboratory experiment plants were exposed to the field intensity of 54 kV m^-1 for 7 days. The plants length was measured and the content of Fe, Mn, Ni, Pb, and Zn was determined using atomic absorption spectrometry (AAS). Results showed that the application of electric field slightly enhanced the growth of E. canadensis shoots. The content of Mn and Ni was significantly lower, and Pb and Zn significantly higher in plants exposed to the electric filed, while Fe content did not differ between control and EF treatment. This provides a rationale for further studies on biological effects of electric field in trace metal contaminated waters and application of an electrically enhanced phytoremediation.

Phytoremediation of mixed contaminated soil enhanced with electric current

Brassica rapa is a plant species that can germinate and grow in mixed contaminated soil with PAH and metals (Cr, Pb and Cd). This plant was selected among 14 plant species for electro-phytoremediation tests because its fast germination and growth in contaminated soil. The influence of type of the electric field (AC, DC) and mode of application (continuous, periodic and polarity inversion) was studied in the electro-phytoremediation tests. The application of 1 ACV/cm potential gradient around B. rapa resulted in the effective elimination of anthracene and phenanthrene, but only minor metal removal. The results of this work suggest that alternating current (AC) may be the most suitable electric field for large scale applications. The spatial configuration of electrodes affects the distribution of the electric field in the soil. Various spatial distribution of electrodes have been tested and it has been identified that parallel anodes and cathodes on the soil surface are the most appropriate configuration for field scale applications. Other configurations can be used to concentrate the contaminant around the growing pant or to transport the contaminants from deep soil layers to the rhizosphere.

Using solar cell to phytoremediate field-scale metal polluted soil assisted by electric field

Eucalyptus globulus were used to remediate a real scale site endangered by e-waste with electric fields supplied by solar cell and conventional storage battery. The capacity of the species to produce biomass, absorb pollutants and decontaminate metals, as well as the soil moisture of various layers under different treatments was compared. During the 3-month experiment, the output potential of solar cell influenced by weather conditions was less stable (ranging from 0 to 8.3 V) comparing with traditional power supply. Solar cell and storage battery stimulated the growth of the species from 5.92 in control to 7.21 and 7.38 kg per plant, respectively, demonstrating their similar improvement effect. Electric fields of either power source increased the metal concentrations of plant roots and shoots in equal proportions and subsequently greatly promoted the efficiency to decontaminate pollutants. Relative to the control without electric field, solar cell and storage battery treatments reduced the soil moisture of each corresponding layer and consequently, alleviated the leaching risk. At the termination of the experiment, metals tended to distribute in the surface layer under electric field assisted phytoremediation either by solar cell or storage battery. Comparing with conventional battery, solar cell has similar effect on improving remediation and mitigating leaching risk, but is less energy consuming and easier to manage, especially under real scale field. Solar cell treatment was suggested to be a suitable supplementary means to improve phytoremediation efficiency.

Can electrochemistry enhance the removal of organic pollutants by phytoremediation?

An electrokinetic-assisted phytoremediation test using maize (Zea mays L.) was conducted in order to assess the role of the electric field on the enhancement of plant uptake and degradation of the moderate polar pesticide atrazine in spiked soils. Twelve different treatments, including two different initial atrazine soil doses (5 and 10 mg kg^-1) and two different values of the electric field applied (2 and 4 V cm^-1), together with the corresponding control treatments without plants and/or without electric current, were tested. The application of an electric field during a period of 4 h a day and with periodical polarity inversion (each 2 h) did not caused significant changes in soil pH; moreover, maize plants increased the buffering capacity of the soil. The application of an electric field of 2 V cm^-1 led to a slight decrease on maize biomass while the accumulation of atrazine and its main metabolites in plant tissues was significantly enhanced. On the overall, the yield of atrazine removal by electrokinetic-assisted phytoremediation with maize was increased up to 36.5% with respect to the phytoremediation process without electricity. On our knowledge, this work is the first one specifically focused on the removal of organic pollutants from soils by using the combination of phytoremediation and electrokinetic remediation.

Treatment technologies for PAH-contaminated sites: a critical review

To reduce environmental and human health risks of contaminated sites, having a comprehensive knowledge about the polycyclic aromatic hydrocarbon (PAH) removal processes is crucial. PAHs are contaminants which are highly recognized to pose threats to humans, animals, and plants. PAHs are hydrophobic and own two or more benzene rings, and hence are resistant to structural degradation. There are various techniques which have been developed to treat PAH-contaminated soil. Four distinct processes to remove PAHs in the contaminated soil, thought to be more effective techniques, are presented in this review: soil washing, chemical oxidation, electrokinetic, phytoremediation. In a surfactant-aided washing process, a removal rate of 90% was reported. Compost-amended phytoremediation treatment presented 58-99% removal of pyrene from the soil in 90 days. Chemical oxidation method was able to reach complete conversion for some PAHs. In electrokinetic treatment, researchers have achieved reliable results in removal of some specific PAHs. Researchers' innovations in novel studies and advantages/disadvantages of the techniques are also investigated throughout the paper. Finally, it should be noted that an exclusive method or a combination of methods by themselves are not the key to be employed for remediation of every contaminated site but the field characteristics are also essential in selection of the most appropriate decontamination technique(s). The remedy for selection criteria is based on PAH concentrations, site characteristics, costs, shortcomings, and advantages.

Se enhanced phytoremediation of diesel in soil by Trifolium repens

A pot-culture experiment was conducted to assess the effects of selenium (Se) (0.5 mg kg^-1) on Trifolium repens exposed to various levels of diesel (0, 15, 20, 25 g kg^-1) for 30 days and 60 days. Exposure to diesel for 60 day led to concentration-dependent decreases in root morphogenesis, chlorophyll content and CAT activity, and to dose-dependent increases in MDA content and SOD activity. The residual diesel concentration in soil increased and the removal efficiency decreased with soil diesel concentration. The chlorophyll content and residual diesel concentration after were slightly higher at 30 days than at 60days. Application of Se to soil increased Trifolium repens tolerance to diesel and significantly increased the phytoremediation effect at 60 days, with a removal rate of 36 ± 8%, compared to 28 ± 7% in the control. These results contribute to the ongoing effort to develop an effective phytoremediation system for soils highly contaminated by diesel.