Contamination of indoor dust and air by polychlorinated biphenyls and brominated flame retardants and relevance of non-dietary exposure in Vietnamese informal e-waste recycling sites

Concentrations of polychlorinated naphthalenes in food and human dietary exposure: A review of the scientific literature

In general, for most environmental persistent organic pollutants (POPs), dietary intake is the main way of exposure. Polychlorinated naphthalenes (PCNs) are a family of two-ringed aromatic compounds, which are ubiquitous environmental contaminants, being structurally similar to PCDD/Fs and PCBs. Although the production and use of PCNs were banned in the USA and Europe some decades ago, due to their persistent properties, PCNs remain still present in the environment, being able to enter the food chain. The present paper was aimed at reviewing the results of the studies focused on determining the levels of PCNs in foods. The human dietary intake of these compounds was also reviewed with the few available data. The information on the levels of PCNs in foodstuffs is currently more abundant than that found in a previous review (Domingo, 2004). Since then, China is the country that has contributed with the greatest number of studies. The results of most surveys seem to suggest that human health risks of PCNs due to dietary exposure should not be worrying. However, because of the important differences in the methodology of the published studies, the comparison of the results is not easy, although there seems to be a general trend towards a decrease in the levels of PCNs in foods. In the next few years, a continued reduction of the environmental levels of PCNs is still expected. Therefore, a direct repercussion of the concentrations of these pollutants in foodstuffs must be also noted. Consequently, a reduction of the dietary exposure to PCNs should be expected. Anyway, to establish the tolerable dietary intake of PCNs is a key issue for assessing human health risks of these pollutants.

E-waste in Vietnam: a narrative review of environmental contaminants and potential health risks

Informal electronic waste (e-waste) dismantling activities contribute to releasing hazardous compounds in the environment and potential exposure to humans and their health. These hazardous compounds include persistent organic pollutants (POPs), polycyclic aromatic hydrocarbons (PAHs) and heavy metals. This review searched papers addressing hazardous compounds emitted from e-waste recycling activities and their health effects in Vietnam. Based on the keywords searched in three electronic databases (PubMed, Psych Info, and Google scholar), we found 21 relevant studies in Vietnam. The review identifies extensive e-waste dismantling activities in Vietnam in the northern region. To measure the environmental exposure to hazardous compounds, samples such as e-waste recycling workshop dust, soil, air, and sediments were assessed, while human exposure levels were measured using participants' hair, serum, or breast milk samples. Studies that compared levels of exposure in e-waste recycling sites and reference sites indicated higher levels of PBDEs, PCBs, and heavy metals were observed in both environmental and human samples from participants in e-waste recycling sites. Among environmental samples, hazardous chemicals were the most detected in dust from e-waste recycling sites. Considering both environmental and human samples, the highest exposure difference observed with PBDE ranged from 2-48-fold higher in e-waste processing sites than in the reference sites. PCBs showed nearly 3-fold higher levels in e-waste processing sites than in reference sites. In the e-waste processing sites, age-specific higher PCB levels were observed in older recycler's serum samples. Among the heavy metals, Pb was highly detected in drinking water, indoor soil and human blood samples. While high detection of Ni in cooked rice, Mn in soil and diet, Zn in dust and As in urine were apparent. Exposure assessment from human biomonitoring showed participants, including children and mothers from the e-waste processing areas, had higher carcinogenic and non-carcinogenic risks than the reference sites. This review paper highlights the importance of further comprehensive studies on risk assessments of environmentally hazardous substances and their association with health outcomes at e-waste processing sites.

HBM4EU E-waste study: Assessing persistent organic pollutants in blood, silicone wristbands, and settled dust among E-waste recycling workers in Europe

E-waste recycling is an increasingly important activity that contributes to reducing the burden of end-of-life electronic and electrical apparatus and allows for the EU's transition to a circular economy. This study investigated the exposure levels of selected persistent organic pollutants (POPs) in workers from e-waste recycling facilities across Europe. The concentrations of seven polychlorinated biphenyls (PCBs) and eight polybrominated diphenyl ethers (PBDEs) congeners were measured by GC-MS. Workers were categorized into five groups based on the type of e-waste handled and two control groups. Generalized linear models were used to assess the determinants of exposure levels among workers. POPs levels were also assessed in dust and silicone wristbands (SWB) and compared with serum. Four PCB congeners (CB 118, 138, 153, and 180) were frequently detected in serum regardless of worker's category. With the exception of CB 118, all tested PCBs were significantly higher in workers compared to the control group. Controls working in the same company as occupationally exposed (Within control group), also displayed higher levels of serum CB 180 than non-industrial controls with no known exposures to these chemicals (Outwith controls) (p < 0.05). BDE 209 was the most prevalent POP in settled dust (16 μg/g) and SWB (220 ng/WB). Spearman correlation revealed moderate to strong positive correlations between SWB and dust. Increased age and the number of years smoked cigarettes were key determinants for workers exposure. Estimated daily intake through dust ingestion revealed that ΣPCB was higher for both the 50th (0.03 ng/kg bw/day) and 95th (0.09 ng/kg bw/day) percentile exposure scenarios compared to values reported for the general population. This study is one of the first to address the occupational exposure to PCBs and PBDEs in Europe among e-waste workers through biomonitoring combined with analysis of settled dust and SWB. Our findings suggest that e-waste workers may face elevated PCB exposure and that appropriate exposure assessments are needed to establish effective mitigation strategies.

Bioaccessibility of halogenated flame retardants and organophosphate esters in settled dust: Influences of specific dust matrices from informal e-waste and end-of-life vehicle processing areas in Vietnam

Bioaccessibility of halogenated flame retardants (HFRs) and organophosphorus esters (OPEs) is necessarily investigated to provide more accurate risk assessment and information about absorption behavior of these pollutants. In this study, total and bioaccessible concentrations of HFRs (including legacy and alternative substances) and OPEs were determined in settled dust samples collected from Vietnamese e-waste and end-of-life vehicle (ELV) processing areas. Concentrations of both HFRs and OPEs were significantly higher in the e-waste dust than ELV dust. Bioavailability of HFRs and OPEs in dust was determined by using an in vitro assay with human-simulated digestive fluids, dialysis membrane, and Tenax® TA sorptive sink. Bioaccessibility of HFRs was markedly lower than that of OPEs, which could be largely due to higher hydrophobicity of HFRs compared to OPEs. Bioaccessibility of almost hydrophobic compounds were markedly lower in the e-waste dust (containing micronized plastic debris) than in the ELV dust (containing oily materials), suggesting the influence of specific dust matrices on pollutant bioaccessibility. Although the daily uptake doses of selected HFRs and OPEs from dust were markedly higher in the e-waste sites compared to the ELV sites, the direct exposure risk was not significant. Our results suggest that bioaccessibility can partly explain the differences between dust and uptake profiles, which may relate to accumulation profiles of HFRs and OPEs in human samples.

Quantitative characterization of resident' exposure to typical semi-volatile organic compounds (SVOCs) around a non-ferrous metal smelting plant

To comprehensively characterize residents' exposure to major semi-volatile organic compounds (SVOCs), samples of indoor floor wipes, size-segregated airborne particles, gaseous air, food, and paired skin wipes were simultaneously collected from residential areas around a large non-ferrous metal smelting plant as compared with the control areas, and three typical SVOCs (including polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and halogenated PAHs (HPAHs)) were determined. Comparison and correlation analysis among matrices indicated PAHs were the major contaminants emitted from metal smelting activities compared to HPAHs and PCBs, with naphthalene verified as the most important characteristic compound, and their accumulation on skin may be a comprehensive consequence of contact with floor dust and air. While patterns of human exposure pathways for the SVOCs were found to be clearly correlated to their vapor pressure, dermal absorption was the major contributor (51.1-76.3%) to total carcinogenic risk (TCR) of PAHs and HPAHs for surrounding residents, especially for low molecular weight PAHs, but dietary ingestion (98.6%) was the dominant exposure pathway to PCBs. The TCR of PAHs exceeded the acceptable level (1 × 10-4), implying smelting activities obviously elevated the health risk. This study will serve developing pertinent exposure and health risk prevention measures.

Southeast Asia's environmental challenges: emergence of new contaminants and advancements in testing methods

Emerging contaminants, including pharmaceuticals, personal care products, microplastics, and per- and poly-fluoroalkyl substances, pose a major threat to both ecosystems and human health in Southeast Asia. As this region undergoes rapid industrialization and urbanization, the increasing presence of unconventional pollutants in water bodies, soil, and various organisms has become an alarming concern. This review comprehensively examines the environmental challenges posed by emerging contaminants in Southeast Asia and recent progress in toxicity testing methods. We discuss the diverse range of emerging contaminants found in Southeast Asia, shedding light on their causes and effects on ecosystems, and emphasize the need for robust toxicological testing methods. This review is a valuable resource for researchers, policymakers, and environmental practitioners working to mitigate the impacts of emerging contaminants and secure a sustainable future for Southeast Asia.

Assessment of legacy and alternative halogenated organic pollutants in outdoor dust and soil from e-waste sites in Nigeria: Concentrations, patterns, and implications for human exposure

E-waste is often processed informally, particularly in developing countries, resulting in the release of harmful chemicals into the environment. This study investigated the co-occurrence of selected persistent organic pollutants (POPs), including legacy and alternative halogenated flame retardants (10 polybrominated diphenyl ethers (PBDEs), decabromodiphenyl ethane (DBDPE), syn and anti-dechlorane plus (DP)), 32 polychlorinated biphenyls (PCBs) and 12 organochlorine pesticides (OCPs), in 20 outdoor dust and 49 soil samples from 7 e-waste sites in Nigeria. This study provides the first report on alternative flame retardants (DBDPE and DP) in Nigeria. The total concentration range of the selected classes of compounds was in the order: ∑10PBDEs (44-12300 ng/g) > DBDPE (4.9-3032 ng/g) > ∑2DP (0.7-278 ng/g) > ∑32PCBs (4.9-148 ng/g) > ∑12OCPs (1.9-25 ng/g) for dust, and DBDPE (4.9-9647 ng/g) > ∑10PBDEs (90.3-7548 ng/g) > ∑32PCBs (6.1-5025 ng/g) > ∑12OCPs (1.9-250 ng/g) > ∑2DP (2.1-142 ng/g) for soil. PBDEs were the major contributors to POP pollution at e-waste dismantling sites, while PCBs were the most significant contributors at e-waste dumpsites. DBDPE was found to be significantly associated with pollution at both e-waste dismantling and dumpsites. Estimated daily intake (EDI) via dust and soil ingestion and dermal adsorption routes ranged from 1.3 to 2.8 ng/kg bw/day and 0.2-2.9 ng/kg bw/day, respectively. In the worst-case scenario, EDI ranged from 2.9 to 10 ng/kg bw/day and 0.8-5.8 ng/kg bw/day for dust and soil, respectively. The obtained intake levels posed no non-carcinogenic risk, but could increase the incidence of cancer at some of the studied e-waste sites, with values exceeding the USEPA cancer risk lower limit (1.0 × 10-6). Overall, our results suggest that e-waste sites act as emission point sources of POPs.

Unexpectedly high levels and health risks of atmospheric polychlorinated biphenyls in modern mechanical dismantling of obsolete electrical equipment: Investigations in a large integrated e-waste dismantling industrial estate

Large industrial estates for electrical and electronic waste (e-waste) mechanical dismantling and recycling are gradually replacing outmoded small factories and intensive domestic workshops for e-waste manual and chemical dismantling. However, the air pollution and health risks of persistent organic pollutants during the modern mechanical processing of e-waste, especially obsolete electrical equipment, still remain unclear. Here, unexpectedly high levels (409.3 ng/m3) and health risks of airborne polychlorinated biphenyls (PCBs) were found during the mechanical processing of obsolete electric equipment or parts in a large integrated dismantling industrial estate, which is comparable to or a dozen times higher than those reported during chemical processing. In contrast, the levels (936.0 pg/m3) and health risks of particulate polybrominated diphenyl ethers (PBDEs) were all lower than those of previous studies. PCB emissions (44.9-3300.5 ng/m3) varied significantly across six mechanical dismantling places specifically treating waste motors, electrical appliances, hardware, transformers, and metals, respectively. The high PCB content and mass processing number of obsolete electrical equipment probably result in the highest PCB emissions from the mechanical dismantling of obsolete motors, followed by waste electrical appliances and metals. The PCB non-cancer and cancer risks associated with inhalation and dermal exposure in different mechanical dismantling places were all above the given potential risk limits. In particular, the health risks of dismantling obsolete motor exceeded the definite risk levels. Little difference in PCB emissions and health risks between working and non-working time suggested the importance of PCB volatilization from most e-waste. Such high PCB emissions and health risks of PCBs undoubtedly posed a severe threat to frontline workers, but fortunately, they decreased significantly with the increasing distance from the industrial estate. We highlight that PCB emissions and associated health risks from obsolete electrical equipment with high PCB content during mechanical dismantling activities should be of great concern.

A review on management practices, environmental impacts, and human exposure risks related to electrical and electronic waste in Vietnam: findings from case studies in informal e-waste recycling areas

Electrical and electronic waste (e-waste) has become a global concern, especially in developing countries. In this review, we conducted a literature survey of e-waste management practices, processing activities, and adverse effects in Vietnam, an emerging country in Southeast Asia, by gathering data from peer-reviewed articles published between 2009 and 2021. This is the first review paper to comprehensively discuss management and research aspects regarding e-waste in an Asian developing country. Due to the lack of an effective management and recycling system, a certain portion of Vietnamese e-waste has been processed by informal sectors without appropriate recycling and pollution control technology, resulting in localized contamination and human exposure to toxic chemicals. Primitive processing activities, such as manual dismantling, open burning, and plastic recycling, have been identified as important contributors to the environmental emission and human exposure to toxic elements (notably As, Mn, Ni, Pb, Zn) and organic pollutants like flame retardants, PAHs, PCBs, and dioxin-related compounds. Informal e-waste processing from these small-scale workshops can release pollutants at similar levels compared to large-scale facilities in developed countries. This fact suggests an urgent need to develop management best practices for e-waste in Vietnam as well as other emerging and developing countries, in order to increase recycling efficiency and minimize their adverse impacts on environmental and human health.

Current status of indoor dust PBDE pollution and its physical burden and health effects on children

Polybrominated diphenyl ethers (PBDEs) are widely detected in indoor dust, which has been identified as a more important route of PBDE exposure for children than food intake. The physical burden and health hazards to children of PBDE exposure in house dust have not been adequately summarized; therefore, this article reviews the current status of PBDE pollution in indoor dust associated with children, highlighting the epidemiological evidence for physical burden and health risks in children. We find that PBDEs remain at high levels in indoor dust, including in homes, schools, and cars, especially in cars showing a significant upward trend. There is a trend towards an increase in the proportion of BDE-209 in household dust, which is indicative of recent PBDE contamination. Conversely, PBDE congeners in car and school indoor dust tended to shift from highly brominated to low brominated, suggesting a shift in current pollution patterns. Indoor dust exposure causes significantly higher PBDE burdens in children, especially infants in early life, than in adults. Exposure to dust also affects breast milk, putting infants at high risk of exposure. Although evidence is limited, available epidemiological studies suggest that exposure to indoor dust PBDEs promotes neurobehavioral problems and cancer development in children.

Occurrence, emission sources, and risk assessment of polybrominated diphenyl ethers and current-use brominated flame retardants in settled dust from end-of-life vehicle processing, urban, and rural areas, northern Vietnam

Settled dust samples from Vietnamese end-of-life vehicle (ELV) processing, urban, and rural areas were analyzed for polybrominated diphenyl ethers (PBDEs) and other current-use brominated flame retardants (BFRs). PBDE levels found in dust samples collected from ELV workshops (median 390; range 120-520 ng/g) and nearby living areas (110; 36-650 ng/g) were generally higher than those in common house dust (25-170 ng/g). BDE-209 was the most predominant congener detected in almost all the samples, indicating extensive application of products containing deca-BDE mixtures. The dust samples from ELV workplaces showed a more abundance of lower brominated congeners (e.g., tetra- to hexa-BDEs) that may originate from car interior materials treated by penta-BDE formulations. Concentrations of other BFRs decreased in the order urban > rural > ELV dust, reflecting the current use of these compounds in new consumer products. Decabromodiphenyl ethane (DBDPE) and 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) were the major alternative BFRs. Daily intake doses and hazard indexes of PBDEs and some other BFRs through dust ingestion were estimated and showed acceptable levels of risk. However, more comprehensive risk assessment considering multiple exposure pathways should be performed, especially for ELV workers and children in the ELV processing and urban areas.

Silicone wristband- and handwipe-based assessment of exposure to flame retardants for informal electronic-waste and end-of-life-vehicle recycling workers and their children in Vietnam

Measuring personal exposure to flame retardants (FRs) is crucial for assessing and controlling human health risks posed by FRs during the recycling of electronic waste (e-waste) and end-of-life vehicles (ELVs). Here, we examined the use of handwipes and silicone wristbands to measure personal FR exposure for e-waste and ELV recycling workers and their children in Vietnam. On the handwipes from the e-waste recycling workers, the predominant five FRs detected were TBBPA (median concentration: 3700 ng/wipe), BDE-209 (1700 ng/wipe), TPHP (500 ng/wipe), DBDPE (410 ng/wipe), and BPA-BDPP (360 ng/wipe). On the handwipes from ELV recycling workers, TPHP (60 ng/wipe), IPPDPP (47 ng/wipe), BIPPPP/DIPPDPP (33 ng/wipe), BDE-209 (26 ng/wipe), and TCIPP (23 ng/wipe) were detected as the five predominant FRs. On the wristbands from the e-waste recycling workers, the five predominant FRs detected were TBBPA (median concentration: 340 ng/g), BDE-209 (330 ng/g), DBDPE (65 ng/g), TPHP (50 ng/g), and TMPP (34 ng/g). On the wristbands from the ELV recycling workers, TPHP (34 ng/g), IPPDPP (18 ng/g), TCIPP (14 ng/g), TDMPP (13 ng/g), BIPPPP/DIPPDPP (9.3 ng/g) and TMPP (9.3 ng/g) were detected as the predominant FRs. The data obtained with the wristbands were comparable to those obtained with the handwipes. Similar FR profiles were found in between the workers and their children. The profiles indicate that the informal e-waste and ELV recycling caused FR exposure not only for workers but also for their children who live in the workshops. By using the handwipe and wristband sampling approaches, we determined types and concentrations of FRs to which the workers and their children were dominantly exposed. Silicone wristband- and handwipe-based assessment is expected to be effective means of measuring personal FR exposure for the informal e-waste and ELV recycling workers and their children.

Legacy and alternative flame retardants in indoor dust from e-waste industrial parks and adjacent residential houses in South China: Variations, sources, and health implications

Many studies have elucidated health concerns of informal e-waste recycling activities, yet few has evaluated the effectiveness of the regulations as well as the human exposure risks to adjacent residents. Herein, legacy polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCDs), and alternative organophosphate esters (OPEs) were investigated in indoor dust collected from three e-waste industrial parks and five adjacent villages located in south China. The levels and composition patterns varied significantly between workshop and home dust. BDE209 showed much higher (p < 0.01) concentrations in workshop dust versus home dust, while relatively comparable levels were found for OPEs and HBCDs. Principal component analysis revealed that OPEs and PBDEs were mainly related to home and workshop dust, respectively. Results strongly indicated that e-waste dismantling activities still contribute to a high burden of BDE209 to surrounding residents, whilst the sources of OPEs may also originated from household products, especially for TCEP. The estimated daily intakes (EDIs) via dust ingestion and dermal absorption for occupational worker and nearby toddlers were below available reference dose (RfD) values even at worst case scenario. This study highlights the significance of deca-BDEs rather than alternative OPEs in e-waste generated in China, which could provide scientific suggestions for policy formulation.

A Review of Polychlorinated Biphenyls (PCBs) Pollution in the Air: Where and How Much Are We Exposed to?

Polychlorinated biphenyls (PCBs) were widely used in industrial and commercial applications, until they were banned in the late 1970s as a result of their significant environmental pollution. PCBs in the environment gained scientific interest because of their persistence and the potential threats they pose to humans. Traditionally, human exposure to PCBs was linked to dietary ingestion. Inhalational exposure to these contaminants is often overlooked. This review discusses the occurrence and distribution of PCBs in environmental matrices and their associated health impacts. Severe PCB contamination levels have been reported in e-waste recycling areas. The occurrence of high PCB levels, notably in urban and industrial areas, might result from extensive PCB use and intensive human activity. Furthermore, PCB contamination in the indoor environment is ten-fold higher than outdoors, which may present expose risk for humans through the inhalation of contaminated air or through the ingestion of dust. In such settings, the inhalation route may contribute significantly to PCB exposure. The data on human health effects due to PCB inhalation are scarce. More epidemiological studies should be performed to investigate the inhalation dose and response mechanism and to evaluate the health risks. Further studies should also evaluate the health impact of prolonged low-concentration PCB exposure.

Comprehensive characterization of halogenated flame retardants and organophosphate esters in settled dust from informal e-waste and end-of-life vehicle processing sites in Vietnam: Occurrence, source estimation, and risk assessment

Information about the co-occurrence of halogenated flame retardants (HFRs) and organophosphate esters (OPEs) in the environment of informal waste processing areas is still limited, especially in emerging and developing countries. In this study, OPEs and HFRs including polybrominated diphenyl ethers (PBDEs), novel brominated flame retardants (NBFRs), and chlorinated flame retardants (CFRs) were determined in settled dust from Vietnamese e-waste recycling (WR) and vehicle processing (VP) workshops. Pollutant concentrations decreased in the order: OPEs (median 1500; range 230-410,000 ng/g) ≈ PBDEs (1200; 58-250,000) > NBFRs (140; not detected - 250,000) > CFRs (13; 0.39-2200). HFR and OPE levels in the WR workshops for e-waste and obsolete plastic were significantly higher than in the VP workshops. Decabromodiphenyl ether and decabromodiphenyl ethane are major HFRs, accounting for 60 ± 26% and 25 ± 29% of total HFRs, respectively. Triphenyl phosphate, tris(2-chloroisopropyl) phosphate, and tris(1,3-dichloroisopropyl) phosphate dominated the OPE profiles, accounting for 30 ± 25%, 25 ± 16%, and 24 ± 18% of total OPEs, respectively. The OPE profiles differed between WR and VP dust samples, implying different usage patterns of these substances in polymer materials for electric/electronic appliance and automotive industries. Human health risk related to dust-bound HFRs and OPEs in the study areas was low.

Occurrence of persistent organic pollutants (POPs) in the atmosphere of South Korea: A review

Numerous studies found the presence of persistent organic pollutants (POPs) in various environmental compartments, including air, water, and soil. POPs have been discovered in various industrial and agricultural products with severe environmental and human health consequences. According to the data, South Korea is a hotspot for POP pollution in the southern part of Asia; hence, South Korea has implemented the Stockholm Convention's National Implementation Plan (NIP) to address this worldwide issue. The purpose of this review is to assess the distribution pattern of POPs pollution in South Korea's atmosphere. According to findings, PAHs, PCBs, BFRs, and PBDEs significantly polluted the atmosphere of South Korea; however, assessing their exposure nationwide is difficult due to a shortage of data. The POPs temporal trend and meta-analysis disclosed no proof of a decrease in PAHs and BFRs residues in the atmosphere. However, POP pollution in South Korea tends to decrease compared to contamination levels in neighboring countries like Japan and China.

Polybrominated diphenyl ethers in indoor dusts from industrial factories, offices, and houses in northern Vietnam: Contamination characteristics and human exposure

Information about the occurrence of polybrominated diphenyl ethers (PBDEs) in indoor dusts from various industrial sectors in Southeast Asia is still scarce. In this study, concentrations and congener-specific profiles of PBDEs were determined in indoor dusts from industrial factories, offices, and houses in northern Vietnam. Levels of Σ8PBDEs were higher in the office dusts (median 270; range 230-300 ng/g) and factory dusts (170; 89-510 ng/g) than in the house dusts (61; 25-140 ng/g). BDE-209 was the most dominant congener, accounting for 27-98% (average 62%) of Σ8PBDEs, suggesting the abundance of products treated with deca-BDE mixtures. Residential, commercial, and industrial activities in the studied locations of this survey were not significant sources of PBDEs as compared to those of informal waste processing activities in Vietnam. Relatively low PBDE concentrations detected in our dust samples partially reflect effectiveness of the global PBDE phase-out. Human exposure and health risk associated with dust-bound PBDEs were estimated, indicating acceptable levels of risk (i.e., neurobehavioral effects). The contributions of workplace dusts in total daily intake doses of PBDEs via dust ingestion were more important for local workers in informal recycling areas than factory workers and general population, raising the need of appropriate labor protection measures.

Effects of Polybrominated Diphenyl Ethers on Hormonal and Reproductive Health in E-Waste-Exposed Population: A Systematic Review

Electronic waste management is a global rising concern that is primarily being handled by informal recycling practices. These release a mix of potentially hazardous chemicals, which is an important public health concern. These chemicals include polybrominated diphenyl ethers (PBDEs), used as flame retardants in electronic parts, which are persistent in nature and show bioaccumulative characteristics. Although PBDEs are suspected endocrine disruptors, particularly targeting thyroid and reproductive hormone functions, the relationship of PBDEs with these health effects are not well established. We used the Navigation Guide methodology to conduct a systematic review of studies in populations exposed to e-waste to better understand the relationships of these persistent flame retardants with hormonal and reproductive health. We assessed nineteen studies that fit our pre-determined inclusion criteria for risk of bias, indirectness, inconsistency, imprecision, and other criteria that helped rate the overall evidence for its quality and strength of evidence. The studies suggest PBDEs may have an adverse effect on thyroid hormones, reproductive hormones, semen quality, and neonatal health. However, more research is required to establish a relationship of these effects in the e-waste-exposed population. We identified the limitations of the data available and made recommendations for future scientific work.

Concentrations and isomer profiles of hexabromocyclododecanes (HBCDDs) in floor, elevated surface, and outdoor dust samples from Basrah, Iraq

Concentrations of the α, β, and γ- diastereomers of hexabromocyclododecane (α-, β-, and γ-HBCDD) were measured in 60 dust samples from 20 homes across Basrah, Iraq. From each home, two indoor dust (ID) samples (specifically one collected from elevated surfaces (ESD) and one from the floor (FD)) were collected from the living room, with one outdoor dust (OD) sample collected from the front yard of the house. Concentrations of HBCDDs decreased in the following sequence ESD > FD > OD. For ID, ΣHBCDD concentrations varied from 5.3 ng g^-1 in FD to 150 ng g^-1 in ESD, with median levels of 60 and 40 ng g^-1 in ESD and FD respectively. Concentrations of γ-HBCDD, and consequently of ΣHBCDDs in ESD, significantly (p < 0.05) exceeded those in FD. For adults, this implies that exposure assessments based on FD only may underestimate exposure, as adults are more likely to ingest ESD. Concentrations of ΣHBCDDs in OD ranged between 7.4 and 120 ng g^-1 with a median of 35 ng g^-1 and were significantly exceeded (p < 0.05) by those in ID samples. Concentrations of ΣHBCDDs in OD from houses with car parking areas exceeded (p < 0.05) those in OD from other homes, implying vehicles as potential emission sources of HBCDDs. Simultaneously, there was moderate correlation (R = 0.510-0.609, p < 0.05) between concentrations in ID and OD, implying that the indoor environment is an important source of OD contamination. The isomer pattern of HBCDDs in dust samples displayed a predominance of α-HBCDD, which represented 56%, 52% and 59% ΣHBCDD in ESD, FD and OD samples respectively. Derived from the concentrations reported in this study, the median and 95^th percentile estimated daily intakes (EDI) for Iraqi adults and toddlers through house dust ingestion did not exceed the reference dose (RfD) value for HBCDD.

Toxic chemicals from uncontrolled e-waste recycling: Exposure, body burden, health impact

Uncontrolled electronic-waste (e-waste) recycling processes have induced serious environmental pollution and human health impacts. This paper reviewed studies on the wide range of toxic chemicals through the use of primitive recycling techniques, their transfer to various ecological compartments, and subsequent health impacts. Results indicated that local food items were heavily polluted by the pollutants emitted, notably heavy metals in vegetables, rice, fish and seafood, and persistent organic pollutants (POPs) in livestock. Dietary exposure is the most important exposure pathway. The associations between exposure to e-waste and high body burdens of these pollutants were evident. It seems apparent that toxic chemicals emitted from e-waste activities are causing a number of major illnesses related to cardiovascular, digestive and respiratory systems, according to the information provided by a local hospital (Taizhou, an e-waste recycling hot spot in China). More epidemiological data should be made available to the general public. It is envisaged that there are potential dangers of toxic chemicals passing on to the next generation via placental transfer and lactation. There is a need to monitor the development and health impacts of infants and children, born and brought up in the e-waste sites.

A review on environmental occurrence, toxic effects and transformation of man-made bromophenols

Brominated phenols (BPs) of anthropogenic origin are aromatic substances widely used in the industry as flame retardants (FRs) and pesticides as well as the components of FRs and polymers. In this review, we have focused on describing 2,4-dibromophenol (2,4-DBP), 2,4,6-tribromophenol (2,4,6-TBP) and pentabromophenol (PBP), which are the most commonly used in the industry and are the most often detected in the air, aquatic and terrestrial ecosystems and the human body. This review describes human-related sources of these BPs that influence their occurrence in the environment (atmosphere, surface water, sediment, soil, biota), indoor air and dust, food, drinking water and the human organism. Data from in vitro and in vivo studies showing 2,4-DBP, 2,4,6-TBP and PBP toxicity, including their estrogenic activity, effects on development and reproduction, perturbations of cellular redox balance and cytotoxic action have been described. Moreover, the processes of BPs transformation that occur in human and other mammals, plants and bacteria have been discussed. Finally, the effect of abiotic factors (e.g. UV irradiation and temperature) on BPs conversion to highly toxic brominated dioxins and brominated furans as well as polybrominated biphenyls and polybrominated diphenyl ethers has been presented.

Concentrations and Toxic Implications of Dioxin-Like Polychlorinated Biphenyls in Soil Samples from Electrical Power Stations in Lagos, Nigeria

Dioxin-like polychlorinated biphenyls (dl-PCBs) are ubiquitous chemicals which mediate toxicity in a way similar to polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans. In silico modeling was used to predict the absorption, distribution, metabolism, excretion, and toxicity (ADMET) properties of eight dioxin-like PCBs in soil samples of 12 power stations in Lagos, Nigeria. Concentrations of Σdl-PCB₈ in soil samples ranged from 490 to 61,000 pg g^-1 , with mean concentrations of 17,000 pg g^-1 . The corresponding toxic equivalent (TEQ) concentrations of Ʃdl-PCB₈ ranged from 0.01 to 450 pg TEQ g^-1 , with a mean value of 42 pg TEQ g^-1 . Mean TEQ concentrations for Ʃdl-PCB₈ in soil samples from all but one of the sites exceeded the Canadian guideline value of 4 pg TEQ g^-1 and the US and German guideline values of 5-10 pg TEQ g^-1 . However, the TEQ concentrations obtained were all below the US action level of 1000 pg TEQ g^-1 . The ADMET predictions revealed that all studied dl-PCBs are inhibitors of three major isoforms (1A2, 2C9, and 2C19) of cytochrome P450 enzyme. Acute oral toxicity (median lethal dose) predictions revealed that all target dl-PCBs were class III compounds. Hepatotoxicity and carcinogenicity were positive, signifying that the studied compounds all have a tendency to elicit these effects. Occupational daily TEQ exposure via soil ingestion was estimated for an average adult worker weighing 70 kg. The maximum exposure obtained was 0.14 pg TEQ kg^-1  body weight day^-1 , which is half of the European Food Safety Authority (EFSA) tolerable daily intake (TDI) for dioxin-like compounds. This raises concern over the possible exceedance of the EFSA TDI for these workers if other dietary and nondietary exposure pathways and dioxin-like compounds are considered. Environ Toxicol Chem 2022;41:800-809. © 2021 SETAC.

Composition changes, releases, and potential exposure risk of PBDEs from typical E-waste plastics

Since Stockholm Convention listed polybrominated diphenyl ethers (PBDEs) as persistent organic pollutants and banned their addition, alternative halogen flame retardants (AHFRs) have been substituted for PBDEs. This study systematically investigates the change trends of PBDEs and AHFRs from typical e-waste plastics and dust, as well as clarifying human exposure risks of PBDEs in formal and informal e-waste recycling enterprises, repair store and residential building. The results show that the PBDEs levels in five typical types of e-waste vary in the range of 1.08 × 10^-3-30.8 μg/g, meeting the requirements of RoHS regulation. Compared with the residential buildings (1.49-1.68 μg/g), PBDEs in the dust from the formal and informal e-waste recycling enterprises are much higher, ranging from 4.70 to 536 μg/g. BDE-209 is the main congener in most e-waste plastic and dust samples. Meanwhile, AHFRs have become the important composition (3.5-61.5%) in e-waste plastics, while its contribution is lower in dust, implying the higher enrichment efficiency of PBDEs. For PBDEs exposure, the dust intake risk of PBDEs is much higher than skin contact for the workers, and the highest hazard quotient (HQ) value (1.40 × 10^-1) and cancer risk (CR) value (1.21 × 10^-7) both imply safe exposure levels.

Electronic-Waste-Driven Pollution of Liquid Crystal Monomers: Environmental Occurrence and Human Exposure in Recycling Industrial Parks

Liquid crystal monomers (LCMs) in liquid crystal displays (LCDs) may be released into the environment, especially in electronic waste (e-waste) recycling industrial parks with a high pollution risk. However, little has been known about the environmental release and human exposure to LCMs until now. Herein, a total of 45 LCMs were detected in LCDs of commonly used smartphones and computers by high-resolution mass spectrometry with suspect screening analysis. Fluorinated biphenyls and their analogs were the dominant LCMs. Based on available standards of the screening results and previous studies, 55 LCMs were quantified in samples from an e-waste recycling industrial park in Central China. The LCMs were frequently detected in outdoor dust (n = 43), workshop #1 indoor dust (n = 53), and hand (n = 43) and forehead wipes (n = 43), with median concentrations of 6950 ng/g, 67,400 ng/g, 46,100 ng/m², and 62,100 ng/m², respectively. The median estimated daily intake values of the LCMs via dust ingestion and dermal absorption were 48.3 and 16.5 ng/kg body weight/day, respectively, indicating a high occupational exposure risk of these compounds. In addition, 16 LCMs were detected in the serum of eight elderly people (≥60 years old) with over 5 years of experience in e-waste dismantling operations, resulting in a total concentration range of 3.9-26.3 ng/mL.

Environmental contamination and human exposure of polychlorinated biphenyls (PCBs) in China: A review

Polychlorinated biphenyls (PCBs), together with 11 other organic compounds, were initially listed as persistent organic pollutants (POPs) by the Stockholm Convention because of their potential threat to ecosystems and humans. In China, many monitoring studies have been undertaken to reveal the level of PCBs in environment since 2005 due to the introduced stricter environmental regulations. However, there are still significant gaps in understanding the overall spatial and temporal distributions of PCBs in China. This review systematically discusses the occurrence and distribution of PCBs in environmental matrices, organisms, and humans in China. Results showed that PCB contamination in northern and southern China was not significantly different, but the PCB levels in East China were commonly higher than those in West China, which might have been due to the widespread consumption of PCBs and intensive human activities in East China. Serious PCB contamination was found in e-waste disassembling areas (e.g., Taizhou of Zhejiang Province and Qingyuan and Guiyu of Guangdong Province). Higher PCB concentrations were also chronicled in megalopolises and industrial clusters. The unintentionally produced PCBs (UP-PCBs) formed during industrial thermal processes may play an increasingly significant role in PCB pollution in China. Low PCB levels were recorded in rural and underdeveloped districts, particularly in remote and high-altitude localities such as the Tibetan Plateau and the South China Sea. However, these data are limited. Human exposure to PCBs is closely related to the characteristics of environmental pollution. This review also discusses existing issues and future research prospects on PCBs in China. For instance, the accumulation characteristics and migration regularities of PCBs in food webs should be further studied. More investigations should be undertaken to assess the quantitative relationship between external and internal exposure to PCBs. For example, bioaccessibility and bioavailability studies should be supplemented to evaluate human health risks more accurately.

Risk assessment of PBDEs and PCBs in dust from an e-waste recycling area of China

Polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) are widely used in outdated electronic and electrical products. In the present study, dust samples from houses, kindergartens, and roads were collected in Guiyu, where informal e-waste recycling activities have been sustained since the 1980s. Haojiang was chosen as a reference site without e-waste pollution. A total of 20 PBDE congeners and 18 PCB congeners was measured. Concentrations of total PBDEs and PCBs in dust samples from Guiyu were significantly higher than those from Haojiang. In Guiyu, kindergarten dust had the highest concentration of PCBs in these three typical environments, whereas the concentration of PBDEs showed no significant difference. Concentrations of PBDEs in Haojiang house dust were found significantly higher than other two environmental dusts. According to the questionnaires, we found that factors such as shoe cabinets, electrical products, and potted plants might affect PBDE and PCB concentrations in house dust. Daily intake of PBDEs and PCBs via dust ingestion was estimated after correction by their house, kindergarten, and road dust concentrations. The mean estimated daily intake (EDI) of PBDEs for Guiyu children was far lower than the oral reference dose recommended by the environmental protection agency (EPA). The Guiyu children seem to have a higher trend of daily intakes of PCBs although their EDIs not being calculated accurately due to the low detection rate. Child exposure to PBDEs via dust ingestion in Guiyu was 36 times higher than those in Haojiang. This indicates that children from e-waste-polluted areas stay in surroundings with heavy burdens of PBDEs, even PCBs. The risk to their health from contaminants is a severe concern.

Measurement of polychlorinated biphenyls with hand wipes and matched serum collected from Chinese E-waste dismantling workers: Exposure estimates and implications

To date, dermal/hand-to-mouth exposure to chemicals in the e-waste recycling environment has not been sufficiently understood, and the importance of dermal absorption of chemicals in e-waste dismantling workers remains controversial. In this study, we utilized hand wipes and matched sera to characterize dermal/hand-to-mouth exposure to PCBs for e-waste dismantling workers, and potential effects on thyroid hormones were also assessed. PCB loadings in hand wipes varied from 0.829-265 ng wipe^-1 (11.3-2850 ng m^-2 wipe^-1), with 37.2 ng wipe^-1 (432 ng m^-2 wipe^-1) as the median value. Serum concentrations of PCBs ranged from 32.3-3410 ng g^-1 lipid weight (lw) with 364 ng g^-1 lw as the median value. Between wipes and sera, lower-chlorinated congeners (e.g. CB-28, -66, -74, -99,-105 and -118) showed significant associations (p < 0.01), but higher-chlorinated congeners (e.g. CB-138, -153, -156, -170, and -180) did not. These lower-chlorinated CBs were the major contributors to estimated dermal/hand-to-mouth average daily doses (ADDs) and the hazard index (HI). Correspondingly, their estimated contributions to serum levels by dermal absorption were also significant, with the contribution of CB-28 being as high as 21.4%. As a consequence, dermal absorption of some low-chlorinated congeners was a non-negligible route for e-waste dismantling workers. Although insignificant association was shown between serum PCBs and thyroid hormones, the potential health risk should be of concern due to the high levels of PCBs observed in workers' sera.

Concentrations of halogenated flame retardants and polychlorinated biphenyls in house dust from Lagos, Nigeria

Polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), and hexabromocyclododecane (HBCDD) are regulated under the Stockholm Convention of the United Nations' Environment Programme; with similar concerns emerging about alternative halogenated flame retardants (alt-HFRs), the use of which is increasing as replacements for PBDEs and HBCDD. While the presence in indoor dust of PCBs, PBDEs, and HBCDDs has been reported previously in a few African locations including Lagos, Nigeria, we are unaware of similar data for alt-HFRs. The present study thus aimed to provide the first information on alt-HFRs in indoor dust in sub-Saharan Africa, and to evaluate the impact of restrictions on the use of PBDEs, HBCDD, and PCBs on their concentrations in house dust in Lagos, Nigeria. Concentrations of ∑₈PBDEs, ∑HBCDDs, ∑₇alt-HFRs, and ∑₈PCBs in 15 samples of dust from homes in Lagos, Nigeria were found to be: 43-810 (median = 300) ng g^-1, <dl - 66 (median = <dl) ng g^-1, 32-2600 (median = 320) ng g^-1 and 3.8-61 (median = 18) ng g^-1 respectively. The dominant PBDE was BDE-209, its replacement decabromodiphenyl ethane (DBDPE) was the predominant alt-HFR, while PCB-138 displayed the highest concentration of the 8 PCBs targeted. Likely due to their higher vapour pressures, concentrations of the non-arochlor PCB 11, as well as those of PCB 28, and PBDE 28 were below detection limits. Concentrations of PBDEs and PCBs reported are generally below those reported previously for Lagos, Nigeria; suggesting restrictions on their manufacture and use have been effective. In contrast, while concentrations of BDE-209 in this study were lower than in one previous study in Lagos, they exceeded those in another; implying that the more recent restrictions on the deca-BDE product have yet to be fully effective. The evidence presented here of concentrations of alt-HFRs in Nigerian house dust provide a valuable benchmark against which future trends in their concentrations may be evaluated.

A meta-analysis of factors influencing concentrations of brominated flame retardants and organophosphate esters in indoor dust

Current assessments of human exposure to flame retardants (FRs) via dust ingestion rely on measurements of FR concentrations in dust samples collected at specific points in time and space. Such exposure assessments are rendered further uncertain by the possibility of within-room and within-building spatial and temporal variability, differences in dust particle size fraction analysed, as well as differences in dust sampling approach. A meta-analysis of peer-reviewed data was undertaken to evaluate the impact of these factors on reported concentrations of brominated flame retardants (BFRs) and organophosphate esters (OPEs) in dust and subsequent human exposure estimates. Except for a few cases, concentrations of FRs in elevated surface dust (ESD) exceeded significantly those in floor dust (FD). The implications of this for exposure assessment are not entirely clear. However, they imply that analysing FD only will underestimate exposure for adults who likely rarely ingest floor dust, while analysing ESD only would overestimate exposure for toddlers who likely rarely ingest elevated surface dust. Considerable within-building spatial variability was observed with no specific trend between concentrations of either BFRs or OPEs in living rooms and bedrooms in the same homes, implying that exposure assessments based solely on sampling one room are uncertain. Substantial differences in FR concentrations were observed in different particle size fractions of dust. This is likely partly attributable to the presence of abraded polymer particles/fibres with high FR concentrations in larger particle size fractions. This has implications for exposure assessment as adherence to skin and subsequent FR uptake via ingestion and dermal sorption varies with particle size. Analysing dust samples obtained from a householder vacuum cleaner (HHVC) compared with researcher collected dust (RCD) will underestimate human exposure to the most of studied contaminants. This is likely due to the losses of volatile FRs from HHVC dust over the extended period such dust spends in the dust bag. Temporal variability in FR concentrations is apparent during month-to-month or seasonal monitoring, with such variability likely due more to changes in room contents rather than seasonal temperature variation.

Polychlorinated biphenyls in indoor dust from urban dwellings of Lahore, Pakistan: Congener profile, toxicity equivalency, and human health implications

This study is the pioneer assessment of the PCBs in indoor dust particles (from air conditioners) of an urbanized megacity from South Asian. The ∑₃₅ PCB concentration ranged from 0.27 to 152.9 ng/g (mean: 24.84 ± 22.10 ng/g). The tri- and tetra-PCBs were dominant homologues, contributing 57.36% of the total PCB concentrations. The mean levels of Σ₈ -dioxin-like (DL), Σ₆ -indicator PCBs and WHO₂₀₀₅ -TEQ for DL-PCBs were 2.22 ± 2.55 ng/g, 9.49 ± 8.04 ng/g and 4.77 ± 4.89 pg/g, respectively. The multiple linear regression indicated a significant correlation of dusting frequency (p = 1.06 × 10-04) and age of the house (p = 1.02 × 10-06) with PCB concentrations in indoor environment. The spatial variation of PCB profile revealed relatively higher concentrations from sites near to illegal waste burning spots, electrical locomotive workshops, and grid stations. Human health risk assessment of PCBs for adults and toddlers through all three exposure routes (ie, inhalation, ingestion, and dermal contact) demonstrated that toddlers were vulnerable to high cancer risk (4.32 × 10^-04 ), while adults were susceptible from low to moderate levels of risk (3.16 × 10^-05 ). Therefore, comprehensive investigations for PCBs in the indoor settings, focusing particularly on the sensitive populations with relationship to the electronic devices, transformers, and illegal waste burning sites, are recommended.

E-Waste Recycling and Resource Recovery: A Review on Technologies, Barriers and Enablers with a Focus on Oceania

Electronic e-waste (e-waste) is a growing problem worldwide. In 2019, total global production reached 53.6 million tons, and is estimated to increase to 74.7 million tons by 2030. This rapid increase is largely fuelled by higher consumption rates of electrical and electronic goods, shorter life cycles and fewer repair options. E-waste is classed as a hazardous substance, and if not collected and recycled properly, can have adverse environmental impacts. The recoverable material in e-waste represents significant economic value, with the total value of e-waste generated in 2019 estimated to be US $57 billion. Despite the inherent value of this waste, only 17.4% of e-waste was recycled globally in 2019, which highlights the need to establish proper recycling processes at a regional level. This review provides an overview of global e-waste production and current technologies for recycling e-waste and recovery of valuable material such as glass, plastic and metals. The paper also discusses the barriers and enablers influencing e-waste recycling with a specific focus on Oceania.

Contamination status, emission sources, and human health risk of brominated flame retardants in urban indoor dust from Hanoi, Vietnam: the replacement of legacy polybrominated diphenyl ether mixtures by alternative formulations

This study investigated the occurrence, distribution of several additive brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) and some novel brominated flame retardants (NBFRs) in urban indoor dust collected from ten inner districts of Hanoi, Vietnam to assess the contamination status, emission sources, as well as their associated human exposure through indoor dust ingestion and health risks. Total concentrations of PBDEs and NBFRs in indoor dust samples ranged from 43 to 480 ng g^-1 (median 170 ng g^-1) and from 56 to 2200 ng g^-1 (median 180 ng g^-1), respectively. The most abundant PBDE congener in these dust samples was BDE-209 with concentrations ranging from 29 to 360 ng g^-1, accounting for 62.6-86.5% of total PBDE levels. Among the NBFRs analyzed, decabromodiphenyl ethane (DBDPE) was the predominant compound with a mean contribution of 98.6% total NBFR amounts. Significant concentrations of DBDPE were detected in all dust samples (median 180 ng g^-1, range 54-2200 ng g^-1), due to DBDPE as a substitute for deca-BDE. Other NBFRs such as 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE), pentabromoethylbenzene (PBEB) and 2,2',4,4',5,5'-hexabromobiphenyl (BB-153) were found at very low levels. Based on the measured BFR concentrations, daily intake doses (IDs) of PBDEs and NBFRs via dust ingestion at exposure scenarios using the median and 95^th percentile levels for both adults and children were calculated for risk assessment. The results showed that the daily exposure doses via dust ingestion of all compounds, even in the high-exposure scenarios were also lower than their reference dose (RfD) values. The lifetime cancer risks (LTCR) were much lower than the threshold level (10^-6), which indicated the acceptable health risks resulting from indoor BFRs exposure for urban residents in Hanoi.

Evaluation of atmospheric sources of PCDD/Fs, PCBs and PBDEs around an MSWI plant using active and passive air samplers

This study evaluated the spatial distributions and concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in ambient air around a municipal solid waste incineration (MSWI) plant located in eastern China in two sampling campaigns within one year. Twenty high-volume samples and 27 passive air samples were collected from May 2012 to May 2013. The mean sampling rate of the passive sampler was estimated to be 3.8 ± 1.8 m³ d^-1 in summer and autumn, while the mean sampling rate was 2.8 ± 1.0 m³ d^-1 in winter and spring. Hence, the annual mean sampling rate was approximately 3.2 ± 1.4 m³ d^-1. The mean levels of PCDD/Fs, PCBs, PBDEs (excluding BDE-209) and BDE-209 in the passive air samples varied in the ranges of 0.086 ± 0.058-0.76 ± 0.51 pg TEQ m^-3, 39 ± 26-170 ± 120 pg m^-3, 3.3 ± 2.2-36 ± 24 pg m^-3 and 58 ± 39-300 ± 150 pg m^-3, respectively. The levels, congener profiles and spatial distributions of PCDD/Fs, PCBs and PBDEs were investigated. The results showed that the concentrations of PCDD/Fs and PCBs decreased with increasing distance from the emission source and that different sampling sites had slightly different effects. However, this trend was opposite to that observed for PBDEs. Moreover, principal component analysis (PCA) demonstrated that the MSWI emission source was the primary factor for PCDD/Fs in ambient air. Further monitoring should be conducted to evaluate the noticeable impact on the environment and human health due to exposure.

Exhaustive characterization of (semi-)volatile organic contaminants in car dust using comprehensive two-dimensional gas chromatography ‒ Time-of-flight mass spectrometry

This work represents the first reported effort to build an extensive database of the organic volatile and semi-volatile contaminants present in car dust as a result of migration from materials used in auto-manufacturing. Untargeted analysis of car dust samples has been performed using comprehensive two-dimensional gas chromatography combined with time-of-fight mass spectrometry (GC×GC ‒ToF MS) after generic sample preparation. The enhanced separation power and structural confirmation capabilities provided by this technique have been used for the either positive or tentative identification of 245 GC-amenable compounds, a number of them being identified for the first time in this type of matrix. Information concerning 5 compounds remaining unidentified has also been provided. Results have been summarised in a searchable database containing chromatographic, mass spectral and normalised abundances calculated for the detected analytes in the ten investigated car dusts used to discuss the main findings of the study. Results are expected to serve other researcher to take decisions concerning priority analytes for further evaluation in this research field and for car manufacturers who might search for safer materials.

Organochlorine pesticides (OCPs) in air-conditioner filter dust of indoor urban setting: Implication for health risk in a developing country

This preliminary investigation highlights the occurrence of organochlorine pesticides (OCPs) in the indoor environment of a megacity, Lahore, Pakistan using the dust ensnared by air-conditioner filters. The Σ₁₆ OCPs concentration ranged from 7.53 to 1272.87 ng/g with the highest percent contribution by ΣDDT (dichlorodiphenyltrichloroethane; 87.21%) and aldrin (6.58%). The spatial variation of OCPs profile revealed relatively higher concentration from homes near to agricultural and abandoned DDT manufacturing sites. Calculated isomer ratios revealed historic sources of hexachlorocyclohexanes (HCHs) and the fresh input of technical DDT and chlordane by the dwellers. The air conditioner dust was helpful to better understand the health risk in the indoor environment. So far a high lifetime cancer risk (10^-3 ) was predicted for toddlers via accidental ingestion, inhalation, and dermal exposure. Similarly, the non-carcinogenic risk-based hazard quotient was found to be high for toddlers (6.94) and within the permissible limit (<1) for adults.

Inhalation bioaccessibility and health risk assessment of flame retardants in indoor dust from Vietnamese e-waste-dismantling workshops

Although bioaccessibility testing is applied worldwide for appropriate chemical risk assessment, few studies have focused on the bioaccessibility of flame retardants (FRs), especially inhalation exposure. This study assessed inhalation exposure to FRs in indoor dust by workers at e-waste-dismantling workshops in northern Vietnam, by using modified simulated epithelial lung fluid (SELF) and artificial lysosomal fluid (ALF). The average mass concentrations of FRs were 130,000 ng/g for workplace dust (n = 3), 140,000 ng/g for floor dust (n = 3), and 74,000 ng/g for settled dust (n = 2), whereas the average bioaccessible concentrations of FRs were 1900, 1400, and 270 ng/g in the SELF condition and 2600, 770, and 490 ng/g in the ALF condition, respectively. Results clearly indicate that the bioaccessible concentrations of FRs are markedly lower than their mass concentrations. Tris(2-chloroethyl) phosphate (TCEP, ~19%), tris(2-chloroisopropyl) phosphate (TCIPP, ~35%), and tris(1,3-dichloroisopropyl) phosphate (TDCIPP, ~22%) showed comparably high bioaccessibility in both SELF and ALF conditions. In contrast, the bioaccessibility of tetrabromobisphenol A (TBBPA, ~20%) was high in the SELF condition, but not in the ALF condition. With regard to the test compounds' physicochemical properties, the inhalation bioaccessibility of FRs in both conditions increased as molecular weight or octanol-water partition coefficient decreased, and it decreased as water solubility decreased. Health risk assessment clearly indicated that the hazard quotient of FRs via inhalation exposure for workers in the e-waste-dismantling workshops was less than 1, suggesting that the inhalation exposure to FRs during indoor dismantling of e-waste at this site was negligible based on the current methodology of non-cancer health risk assessment used in this study.

Air pollution caused by phthalates and cyclic siloxanes in Hanoi, Vietnam: Levels, distribution characteristics, and implications for inhalation exposure

Contamination status and distribution characteristics of ten phthalic acid esters (PAEs) and three cyclic volatile methyl siloxanes (CSs) were determined in the air (gas and particle) samples collected from indoor and outdoor spaces of several chemistry laboratories, offices, and homes from urban area of Hanoi, the capital city of Vietnam. Air concentrations of Σ10PAEs (median 688; range 142-2390 ng m^-3) and Σ3CSs (171; not detected-1100 ng m^-3) in the indoor air samples were significantly higher than those measured in the outdoor ones (Σ10PAEs: 161; 34.1-515 ng m^-3 and Σ3CSs: 43.2; not detected-258 ng m^-3), partly suggesting the predominance of indoor emission sources of these substances. There were significant positive correlations in total air concentrations of phthalates and siloxanes between the indoor and outdoor air samples. The most predominant phthalates were diethyl-, di-n-butyl-, diisobutyl-, and di(2-ethylhexyl) phthalate. For siloxanes, D5 and D6 were more abundant than D4 in most samples. Except for di(2-ethylhexyl)- and di-n-octyl phthalate in some locations, almost all the compounds were likely associated with gas phase than particle phase. Daily intake doses of airborne phthalates and siloxanes, and non-cancer and cancer risks of selected phthalates were estimated for different exposure groups such as adults, children, and university subjects (e.g., laboratory staff and students), indicating relatively low levels of risk.

Update of the risk assessment of hexabromocyclododecanes (HBCDDs) in food

The European Commission asked EFSA to update its 2011 risk assessment on hexabromocyclododecanes (HBCDDs) in food. HBCDDs, predominantly mixtures of the stereoisomers α-, β- and γ-HBCDD, were widely used additive flame retardants. Concern has been raised because of the occurrence of HBCDDs in the environment, food and in humans. Main targets for toxicity are neurodevelopment, the liver, thyroid hormone homeostasis and the reproductive and immune systems. The CONTAM Panel concluded that the neurodevelopmental effects on behaviour in mice can be considered the critical effects. Based on effects on spontaneous behaviour in mice, the Panel identified a lowest observed adverse effect level (LOAEL) of 0.9 mg/kg body weight (bw) as the Reference Point, corresponding to a body burden of 0.75 mg/kg bw. The chronic intake that would lead to the same body burden in humans was calculated to be 2.35 μg/kg bw per day. The derivation of a health-based guidance value (HBGV) was not considered appropriate. Instead, the margin of exposure (MOE) approach was applied to assess possible health concerns. Over 6,000 analytical results for HBCDDs in food were used to estimate the exposure across dietary surveys and age groups of the European population. The most important contributors to the chronic dietary LB exposure to HBCDDs were fish meat, eggs, livestock meat and poultry. The CONTAM Panel concluded that the resulting MOE values support the conclusion that current dietary exposure to HBCDDs across European countries does not raise a health concern. An exception is breastfed infants with high milk consumption, for which the lowest MOE values may raise a health concern.

Polybrominated diphenyl ethers in indoor and outdoor dust from Southeast Asia: An updated review on contamination status, human exposure, and future perspectives

Contamination status, potential emission sources, environmental fate, and human exposure risk of polybrominated diphenyl ethers (PBDEs) are reviewed for indoor and outdoor dust from Southeast Asian countries, under an international comparison point of view. PBDEs have been widely detected in house, workplace, car, and road dust samples collected from Indonesia, Philippines, Singapore, Thailand, and Vietnam. The highest PBDE levels up to hundreds of μg/g were found in settled dust from some e-waste processing areas in Thailand and Vietnam. Concentrations of PBDEs in house, car, and road dust from this region were generally lower than those reported in China and Western developed countries. BDE-209 was the most predominant congener in almost all analyzed samples, reflecting the widespread application of materials and products treated with commercial deca-BDE mixtures in this region. The market demand and application rate of commercial PBDE mixtures in Southeast Asia were lower than those documented for other regions in the world. As a result, PBDE contamination levels in the environments (e.g., indoor and outdoor dust) and associated risks in these countries were not significantly high. However, more attention should be paid to informal processing activities and management strategies for modern wastes such as e-waste, plastics, and end-of-life vehicles. There exist several knowledge gaps about spatiotemporal trends, potential sources, risk assessment, inventory, management, and legislation regarding PBDEs in dust from this region, which should be filled by additional comprehensive, detailed studies with relevant inter-country/regional monitoring schemes.

Atmospheric Occurrence of Organochlorine Pesticides and Inhalation Cancer Risk in Urban Areas at Southeast Brazil

Organochlorine pesticides (OCPs) have been produced for almost a century and some of them are still used, even after they have been proved to be toxic, persistent, bioaccumulative and prone to long-range transport. Brazil has used and produced pesticides in industrial scales for both agricultural and public health purposes. Urban and industrial regions are of special concern due to their high population density and their increased exposure to chemical pollution, many times enhanced by chemical production, application or irregular dumping. Therefore, we aimed to investigate the occurrence of OCPs in outdoor air of urban sites from two major regions of southeast Brazil. Some of these sites have been affected by OCP production and their irregular dumping. Deterministic and probabilistic inhalation cancer risk (CR) assessments were conducted for the human populations exposed to OCPs in ambient air. Ambient air was mainly affected by Ʃ-HCH (median = 340 pg m^-3) and Ʃ-DDT (median = 233 pg m^-3), the only two OCPs registered for domissanitary purposes in Brazil. OCP concentrations tended to be higher in summer than in winter. Dumping sites resulted in the highest OCP atmospheric concentrations and, thus, in the highest CR estimations. Despite of all limitations, probabilistic simulations suggested that people living in the studied regions are exposed to an increased risk of hepatic cancer. Infants and toddlers (0 < 2 y) were exposed to the highest inhalation CRs compared to other age groups. Other exposure pathways (such as ingestion and dermic uptake) are needed for a more comprehensive risk assessment. Moreover, this study also highlights the need to review the human exposure to OCPs through inhalation and their respective CR in other impacted areas worldwide, especially where high levels of OCPs are still being measured.

Comprehensive study of insecticides in atmospheric particulate matter in Hanoi, Vietnam: Occurrences and human risk assessment

Air pollution is the most serious environmental issue in Vietnam, particularly in big cities. Air pollutants that are set as environmental standards are regularly monitored by the public institutions. Whereas, environmental data on organic micro-pollutants in atmospheric particulate matters (APMs) is limited, including PAHs and POPs. Although massive pesticides are used in big cities, their data in APMs in Vietnam is very scarce. In order to elucidate their occurrence in the ambient air in Hanoi and their health effects, we surveyed 107 insecticides in APMs by a novel target screening method using LC-QTOF-MS-SWATH. A total of 19 insecticides were detected in the dry and the rainy seasons. Among them, 16 substances are, to our knowledge, reported for the first time in the literature. Their total concentrations varied from 0.47 to 27.0 ng m^-3 (median, 3.6 ng m^-3), detection frequencies of 12 compounds are higher than 42%, and the number of insecticides detected per each sample ranging from 5 to 13 (median, 9). Total concentrations in the dry season were generally higher than in the rainy season, and concentrations at night were higher than daytime in both seasons. The level of insecticides depends not only on the season, but also on its physicochemical properties, its application conditions, and the meteorological conditions. Their emission sources could be related to agricultural usage, floricultural activities, and pest control in houses. The total maximum daily intake (DI_air) through inhalation for adults and children were 2.39E-05 mg kg^-1 d^-1 and 2.98E-05 mg kg^-1 d^-1, respectively. The highest Hazard Quotients (HQs) were 1.34E-03 and 3.37E-03, and the highest Hazard Indices (HIs) were 2.71E-03 and 6.33E-03 for adults and children, respectively. All values of HQs, and HIs of insecticides were less than 1, indicating that health risk would be negligible.

Human exposure to halogenated and organophosphate flame retardants through informal e-waste handling activities - A critical review

Informal electrical and electronic waste (e-waste) handling activities constitute a potentially important source of halogenated (HFRs) and organophosphate flame retardants (OPFRs) to the environment and humans. In this review, two electronic databases (ScienceDirect and Web of Science Core Collection) were searched for papers that addressed this topic. A total of 82 relevant studies (including 72 studies selected from the two databases and 10 studies located from the references of the first 72 selected studies) were identified that reported on human external and internal exposure to HFRs and OPFRs arising as a result of informal e-waste handling activities. Compared to the general population, higher levels of external exposure (i.e., inhalation, ingestion, and dermal absorption) and internal exposure (i.e., blood serum, hair, breast milk, urine, and other human matrices) to HFRs and OPFRs were identified for e-waste recyclers and residents inhabiting e-waste dismantling and recycling zones, especially for younger adults and children. Food intake and dust ingestion were the dominant exposure pathways for the majority of brominated flame retardants (BFRs) and dechlorane plus (DP); while inhalation was identified as the most significant pathway of human exposure to OPFRs in informal e-waste sites. The majority of research to date has focused on China and thus future studies should be conducted in other regions such as Africa and South Asia. Other suggested foci of future research are: examination of exposure via dermal contact with e-waste, dietary exposure of local populations to OPFRs, confirmation of the existence of and cause(s) of the higher body burdens of females compared with males amongst populations impacted by informal e-waste handling, and characterisation of exposure of such populations to chlorinated paraffins.

Quantification of Brominated Polycyclic Aromatic Hydrocarbons in Environmental Samples by Liquid Chromatography Tandem Mass Spectrometry with Atmospheric Pressure Photoionization and Post-column Infusion of Dopant

A sensitive method for the quantification of brominated polycyclic aromatic hydrocarbons (BrPAHs) in environmental samples is yet to be developed. Here, we optimized the analytical conditions for liquid chromatography tandem mass spectrometry with atmospheric pressure photoionization and post-column infusion of dopant (LC-DA-APPI-MS/MS). We then compared the sensitivity of our developed method with that of conventional gas chromatography high-resolution MS (GC-HRMS) by comparing the limits of quantification (LOQs) for a range of BrPAHs. Finally, to evaluate our developed method, 12 BrPAHs in sediments and fish collected from Tokyo Bay, Japan, were analyzed; 9 common PAHs were also targeted. The LOQs of the developed analytical method were 14 - 160 times lower than those of GC-HRMS for the targeted BrPAHs. The developed analytical method is a sensitive approach for determining the concentrations of BrPAHs in sediment and fish samples.

Spatial and temporal distributions of hexabromocyclododecanes in surface soils of Jinan, China

Contamination by hexabromocyclododecanes (HBCDDs) in the soil environment is an ongoing concern because of their "specific exemption" on the production and use in China. In this study, spatial distribution, temporal trend, and diastereoisomer profiles of HBCDDs were examined in surface soils collected in Jinan, China. Concentrations of ΣHBCDD (sum of α-, β-, and γ-HBCDDs) in soils ranged from 1.70 to 228 ng/g dry weight (dw), with a mean value of 26.1 ng/g dw. Soils collected from e-waste dismantling sites (mean 146 ng/g dw) contained significantly higher concentrations of ΣHBCDD than those of urban (15.5 ng/g dw) and farmland soils (3.86 ng/g dw) (p < 0.01). The temporal trend suggested that ΣHBCDD levels in the industrial area rose significantly between 2014 and 2019 (p < 0.05), with an annual increase of 12%. An increase in ΣHBCDD levels was also observed in urban and farmland soil samples during the study period, although it did not reach a significant level (p > 0.05). All surface soils were dominated by γ-HBCDD (mean 60.7% of total concentrations); however, the proportions of α-isomer increased from 28.7% in urban and rural soils to 43.4% in industrial soils. The calculated risk quotients of HBCDDs present in soils were at least 25-fold lower than the threshold limit value. The mean mass inventory of HBCDDs was approximately 2501 kg in the cultivated land of Jinan City; further studies are needed to discern the uptake of HBCDDs by crops and the fate of these chemicals in agricultural ecosystems.

Global occurrence, chemical properties, and ecological impacts of e-wastes (IUPAC Technical Report)

The waste stream of obsolete electronic equipment grows exponentially, creating a worldwide pollution and resource problem. Electrical and electronic waste (e-waste) comprises a heterogeneous mix of glass, plastics (including flame retardants and other additives), metals (including rare Earth elements), and metalloids. The e-waste issue is complex and multi-faceted. In examining the different aspects of e-waste, informal recycling in developing countries has been identified as a primary concern, due to widespread illegal shipments; weak environmental, as well as health and safety, regulations; lack of technology; and inadequate waste treatment structure. For example, Nigeria, Ghana, India, Pakistan, and China have all been identified as hotspots for the disposal of e-waste. This article presents a critical examination on the chemical nature of e-waste and the resulting environmental impacts on, for example, microbial biodiversity, flora, and fauna in e-waste recycling sites around the world. It highlights the different types of risk assessment approaches required when evaluating the ecological impact of e-waste. Additionally, it presents examples of chemistry playing a role in potential solutions. The information presented here will be informative to relevant stakeholders seeking to devise integrated management strategies to tackle this global environmental concern.

Polychlorinated biphenyls in settled dusts from an end-of-life vehicle processing area and normal house dusts in northern Vietnam: Occurrence, potential sources, and risk assessment

Concentrations and congener-specific profiles of total 209 polychlorinated biphenyls (PCBs) were investigated in settled dust samples collected from end-of-life vehicle (ELV) processing, urban, and rural areas in northern Vietnam. Concentrations of total 209 PCBs, seven indicator congeners, and twelve dioxin-like PCBs decreased in the order: ELV working > ELV living ≈ urban > rural dusts. Penta- and hexa-CBs dominated the homolog patterns in all the samples with higher proportions in the ELV dusts compared to the urban and rural house dusts. The abundance and pattern of PCBs in the ELV dusts suggest on-going emissions of these compounds related to processing of vehicular oils and lubricants containing PCBs, whereas the presence of PCBs in the urban and rural house dusts indicate long-time releases. However, levels of some PCBs identified as by-products of pigment manufacturing (e.g., PCB-11 and PCB-209) were higher in the urban house dusts than those from other locations, resulting from human activities utilizing paints and pigments. Daily intake doses (ID), non-carcinogenic hazard quotient (HQ), and lifetime cancer risk (CR) of PCBs through dust ingestion were estimated for ELV workers and residents in the studied areas. The workers and children in the ELV sites were estimated to be at higher risk of PCB exposure, however almost all of the HQ < 1 and CR < 10^-4 indicate no serious risk related to dust-bound PCBs.

Bioaccessibility and exposure assessment of flame retardants via dust ingestion for workers in e-waste processing workshops in northern Vietnam

Flame retardants (FRs) from electronic waste (e-waste) are a widespread environmental concern. In our study, in vitro physiologically based extraction tests (PBETs) for FRs were conducted in three different areas where dust remained after processing of e-waste to identify the bioaccessible FRs and quantify their bioaccessibilities of gastrointestinal tract for human as well as to assess the exposure via ingestion of workers in e-waste processing workshops. All 36 FRs were measured and detected in indoor dusts. Among the FRs, the mean concentrations of polybrominated diphenyl ethers (PBDEs) in the floor dust and settled dust were highest, 65,000 ng/g, and 31,000 ng/g, respectively. In contrast, phosphorus-containing flame retardants (PFRs) presented the highest mean concentration in the workplace dust samples, 64,000 ng/g. However, the highest bioaccessible concentrations in workplace dust, floor dust, and settled dust were observed for PFRs: 5900, 1600, and 680 ng/g, respectively. This study revealed that the higher bioaccessibility of PFRs versus other compounds was related to the negative correlation between FR concentrations and log K_OW (hydrophobicity) values. The fact that hazard indices calculated using measured bioaccessibilities were less than 1 suggested that the non-cancer risk to human health by the FRs exposure via dust ingestion might be low.

Contamination status and temporal trends of persistent toxic substances in sediment cores from coastal areas of central Vietnam

Residue concentrations of organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) were measured in sediment core samples from two estuary areas of central Vietnam to elucidate recent status and temporal trends of pollution based on the depth profiles. Concentrations of PCBs, PBDEs, and endosulfan compounds were generally higher than those of the remaining OCPs. Peak concentrations of OCPs were found in the sediment layers corresponding to the late 1950s to the early 1980s, implying the intensive application of these insecticides in Vietnam during such periods. Although the highest PCB concentrations were measured in sediment layers dated in the 1970s, increasing PCB residues observed in the shallower layers may be related to the strong industrialization and urbanization in Vietnam. BDE-209 exhibited increasing concentrations and proportions to total PBDEs towards shallower depths, suggesting substantial use and on-going releases of deca-BDE products in recent years.

Polyurethane foam-based passive air sampling for simultaneous determination of POP- and PAH-related compounds: A case study in informal waste processing and urban areas, northern Vietnam

Polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), hexabromobiphenyl (BB-153), novel brominated flame retardants (NBFRs), and unsubstituted/methylated polycyclic aromatic hydrocarbons (PAHs/Me-PAHs) were simultaneously monitored in the air samples collected from Vietnamese urban and vehicular waste processing areas by using polyurethane foam-based passive air sampling (PUF-PAS) method. Concentrations (pg m^-3) of organic pollutants decreased in the order: PAHs (median 29,000; range 5100-100,000) > Me-PAHs (6000; 1000-33,000) > PCBs (480; 170-1100) > PBDEs (11; 5.3-86) > NBFRs (0.20; n. d. - 51) > BB-153 (n.d.). The difference in total PCB and PBDE concentrations between the urban and waste processing air samples was not statistically significant. Meanwhile, levels of PAHs, Me-PAHs, benzo [a]pyrene equivalents (BaP-EQs), and toxic equivalents of dioxin-like PCBs (WHO-TEQs) were much higher in the waste processing sites. This is the first report on the abundance of mono- and di-CBs (notably CB-11) in the air from a developing country, suggesting their roles as emerging and ubiquitous air pollutants. Our results have indicated potential sources of specific organic pollutants such as dioxin-like PCBs, PAHs, and Me-PAHs from improper treatment of end-of-life vehicles and other vehicle related materials (e.g., waste oils and rubber tires), as well as current emission of PCBs and PBDEs in the urban area in Vietnam. Further atmospheric monitoring studies should be conducted in this developing country that cover both legacy and emerging contaminants with a focus on areas affected by rapid urbanization and informal waste processing activities.