A comprehensive review on the analytical method, occurrence, transformation and toxicity of a reactive pollutant: BADGE

Binding mechanism and safety assessment of BADGE from epoxy-coated cans and protein

Bisphenol A diglycidyl ether (BADGE) from the epoxy coating can migrate to food and react with the protein, but the safety of these adducts formed is unknown, besides, after being consumed in large quantities, BADGE may also combine with other proteins supplemented, posing a potential hazard to human health. The binding mechanism and the possible binding products of BADGE and protein were explored by a series of liquid chromatograph-tandem mass spectrometry (LC-MS) methods. Results showed BADGE can modify a variety of amino acid residues with two modification modes, of which the largest number of modifications were cysteine (Cys) and lysine (Lys). Some adducts formed had shown potential toxicity by in-silico toxicity evaluation and needed to be concerned, which provided a new perspective on the safety of epoxy coating. The molecular docking simulation revealed that hydrophobicity and hydrogen bond interactions are the main intermolecular forces in complex formation.

First evidence in the association of phenolic endocrine-disrupting chemicals with secondary non-alcoholic fatty liver disease: A case-control study in South China

The presence of phenolic endocrine disrupting chemicals (EDCs) in patients with secondary non-alcoholic fatty liver disease (S-NAFLD) and their associations with S-NAFLD incidence have not been previously documented. In this study, serum concentrations of 32 phenolic EDCs, including parabens, benzophenone-type UV-filters, bisphenols, and bisphenol A diglycidyl ether derivatives, were detected in patients with S-NAFLD as well as healthy population from South China. These target EDCs were ubiquitous in serum samples from both cohorts. Interestingly, significantly higher (p < 0.05) serum levels of most analytes were detected in individuals with S-NAFLD compared to those in the healthy population. Through multiple modeling analyses, we observed that parabens and bisphenols mixtures were positively associated with S-NAFLD incidence. A list of high-risk EDCs for S-NAFLD-related diseases was identified, including propyl paraben (PrP), butyl paraben (BuP), bisphenol A (BPA), and bisphenol AP (BPAP). Furthermore, significant positive correlations were found between the serum levels of these high-risk analytes and liver clinic indices. To the best of our knowledge, this study firstly examined the serum levels of multiple phenolic EDCs in patients with S-NAFLD, aiming to provide novel insights into high-risk EDCs associated with S-NAFLD incidence and their associations with clinic liver indices.

Toxicokinetic Characterization of Isopropyl Glycidyl Ether in Rat by a Validated LC-APCI-MS/MS Method Using In-Source Derivatization

Isopropyl glycidyl ether (IPGE) is a member of the large glycidyl ether family frequently used as a reactive diluent during the epoxy resin manufacturing process. Although the toxicity induced by this type of chemical has been investigated in many studies of different aspects (acute, subchronic, genotoxic, reproduction, etc.), there is still little known about their toxicokinetics. To gain information about the attainable systemic concentration, a liquid chromatography─tandem mass spectrometry (LC-MS/MS) method was developed and validated for the quantification of IPGE in rat plasma using its structural analogue tert-butyl glycidyl ether as the internal standard. Two types of atmospheric pressure ionization techniques have been utilized; however, the protonated molecule ion could not be observed in either ionization mode. First, the ammonium adduct form was used for fragmentation, albeit this multiple-reaction monitoring transition proved to be not sensitive enough for real study sample analysis. In order to achieve the desired sensitivity, the Meerwein reaction was applied as an in-source derivatization tool to generate a product by using the ethylnitrilium ion formed from the eluent acetonitrile. This gas-phase reaction enabled us to build up a method with a substantial sensitivity increase (LLOQ of 0.01 μg/mL) compared to that obtained with the ammonium adduct. After method validation, real study samples from a single-dose oral toxicity study were analyzed to evaluate the blood plasma concentration of IPGE at three dose levels. Dose-dependent superproportional systemic exposure was observed in the studied dose range (1000-2000 mg/kg). Additionally, seven metabolites of IPGE were tentatively identified in rat plasma: 3-isopropoxy-2-hydroxy-1-propanol (M1), sulfate-conjugate of IPGE (M3), glucuronide-conjugate of IPGE (M4), 3-isopropoxy-2-hydroxypropionic acid (M5), O-isopropyl-N-acetylserine (M6), O-(2-hydroxy-isopropyl)-N-acetylserine (M7), and glutathione-conjugate of IPGE (M11). Present work may pave the way to other methods that are able to quantify compounds similar to IPGE even in human plasma, which could provide valuable information to assist exposure assessment and biomonitoring in occupational health and safety studies.

New Perspectives on Canned Fish Quality and Safety on the Road to Sustainability

Canning extends the shelf life of seafood products while preserving their quality. It is increasingly considered a more sustainable food processing method due to the primary fishing methods used for key species and the lower energy costs compared to the production of fresh and frozen fish. However, canning can change key components, allow some contaminants to persist, and generate undesirable compounds. This review revisits the effects of canning on product quality and highlights the potential hazards that may compromise safety. It also examines emerging trends in product development, particularly novel formulations aimed at optimizing nutritional value while maintaining safety standards without compromising sustainability. Overall, the quality of most canned seafood meets industry requirements, for example, with improvements in processing strategies and strict safety protocols, leading to reduced histamine levels. However, data on marine biotoxins and microplastics in canned seafood remain limited, calling for more research and monitoring. Environmental contaminants, along with those generated during processing, are generally found to be within acceptable limits. Product recalls related to these contaminants in Europe are scarce, but continuous monitoring and regulatory enforcement remain essential. While new formulations of canned fish show promise, they require thorough evaluation to ensure both nutritional value and safety.

Impact of bisphenol A and analogues eluted from resin-based dental materials on cellular and molecular processes: An insight on underlying toxicity mechanisms

Dental resin systems, used for artificial replacement of teeth and their surrounding structures, have gained popularity due to the Food and Drug Administration's (FDA) recommendation to reduce dental amalgam use in high-risk populations and medical circumstances. Bisphenol A (BPA), an endocrine-disrupting chemical, is an essential monomer within dental resin in the form of various analogues and derivatives. Leaching of monomers from resins results in toxicity, affecting hormone metabolism and causing long-term health risks. Understanding cellular-level toxicity profiles of bisphenol derivatives is crucial for conducting toxicity studies in in vivo models. This review provides insights into the unique expression patterns of BPA and its analogues among different cell types and their underlying toxicity mechanisms. Lack of a consistent cell line for toxic effects necessitates exploring various cell lines. Among the individual monomers, BisGMA was found to be the most toxic; however, BisDMA and BADGE generates BPA endogenously and found to elicit severe adverse reactions. In correlating in vitro data with in vivo findings, further research is necessary to classify the elutes as human carcinogens or xenoestrogens. Though the basic mechanisms underlying toxicity were believed to be the production of intracellular reactive oxygen species and a corresponding decline in glutathione levels, several underlying mechanisms were identified to stimulate cellular responses at low concentrations. The review calls for further research to assess the synergistic interactions of co-monomers and other components in dental resins. The review emphasizes the clinical relevance of these findings, highlighting the necessity for safer dental materials and underscoring the potential health risks associated with current dental resin systems.

Chemical migration from reusable plastic bottles: Silicone, polyethylene, and polypropylene show highest hazard potential in LC-HRMS analysis

Estimating the chemical hazards of drinking water stored in reusable plastic bottles is challenging due to the numerous intentionally and unintentionally added chemicals. To address this, we developed a broad screening strategy using evaporation enrichment and liquid chromatography high-resolution mass spectrometry (LC-HRMS) to evaluate migration of non-volatile chemicals from various reusable plastic bottles. The study analyzed a wide range of materials, revealing significant variability in chemical profiles across different bottle types. Over 70 % of nearly 1000 unknown compounds were unique to specific bottles. Silicone, HDPE, LDPE, and PP bottles showed the highest migration rates, with silicone releasing the most unknowns, but also phthalates and plasticizers. PP bottles exhibited concerning migration of clarifying agents and bisphenol A derivatives. In contrast, PS, PET, PETG, and PCTG had minimal migration, indicating lower health risks. These findings highlight the need for comprehensive assessments of plastic materials to improve consumer safety.

Distribution, bioaccumulation and human exposure risk of bisphenol analogues, bisphenol A diglycidyl ether and its derivatives in the Dongjiang River basin, south China

Bisphenols, bisphenol A diglycidyl ether (BADGE), and bisphenol F diglycidyl ether (BFDGE) are commonly used as raw materials or additives in the production of several industrial and consumer products. However, information regarding the occurrence and distribution of these industrial chemicals in freshwater ecosystem is limited. In this study, four bisphenols, six BADGEs, and three BFDGEs were determined in abiotic and biotic samples collected from the Dongjiang River basin in southern China. Among the four bisphenols, BPA was widely present in all samples analyzed including surface water (median: 1.81 ng/L), sediment (3.1 ng/g dw), aquatic plants (3.69 ng/g dw), algae (7.57 ng/g dw), zooplankton (6.17 ng/g dw), and fish muscle (5.28 ng/g dw). Among the nine BADGEs and BFDGEs analyzed, BADGE, BADGE•H2O, BADGE·HCl·H2O and BADGE•2H2O was found in all sample types. Although the median concentration of BADGE•2H2O in surface water was below LOQ, this compound was found at median concentrations of 2.61, 3.59, 1.03, 1.69, and 49.8 ng/g dw in sediment, plants, algae, zooplankton, and fish muscle, respectively. Significant positive linear correlations were found among logarithmic transformed concentrations of BPA, BADGE, BADGE•H2O, BADGE•HCl•H2O, and BADGE•2H2O in sediment. The bioconcentration factor (logBCF) values of BADGE, BADGE•H2O, BADGE•HCl, BADGE•HCl•H2O, BADGE•2H2O, and BADGE•2HCl in fish, plants, algae, and zooplankton were > 3.3 L/kg (wet weight), indicating that these chemicals possess moderate bioaccumulation potential. The estimated daily total intake of bisphenols and BADGEs through fish consumption was 75.1 ng/kg bw/day for urban adult residents. The study provides baseline information on the occurrence of bisphenols, BADGEs, and BFDGEs in a freshwater ecosystem.

The combined use of biological investigations, bio chromatographic and in silico methods to solve the puzzle of badge and its derivative's toxicity

Bisphenol A diglycidyl ether (BADGE) is a pre-polymer of BPA widely used in manufacturing of epoxy resins and plastics; due to its high reactivity, unintended by-products, such as chlorinated and hydrolysed products, can reach the human body. This research integrates multiple approaches such as computational predictions, chromatographic experiments, biological assays, and human biomonitoring studies to comprehensively evaluate the toxicological profiles of the parent compound and its derivatives. In silico predictions were first utilized to estimate the toxicological properties and interactions of BADGE derivatives, providing insights into their bioactivity. Biomimetic liquid chromatography was then used to simulate membrane permeability and biodistribution, predicting how these chemicals might cross biological membranes and accumulate in tissues. In vitro experiments assessed cellular toxicity through viability assays, identifying BADGE·2HCl as the most cytotoxic derivative. Reactive Oxygen Species (ROS) production evaluation was performed to assess the oxidative stress induced by these compounds, revealing elevated ROS levels in cells exposed to BADGE and BADGE·2HCl with a consequent significant oxidative damage. Similarly, BADGE and BADGE·2HCl were able to induce cellular death by apoptosis activation. Human serum analysis in a population sample (N = 96), showed BADGE·2H2O as the most frequently detected metabolite, indicating a considerable human exposure and metabolic processes. The findings highlight a toxicity of BADGE derivatives similar to that of BADGE; BADGE·2HCl resulted particularly cytotoxic and BADGE·2H2O is the most frequent detected in human serum, underscoring the need for regulatory measures to mitigate potential health risks associated with these compounds.

Comparative assessment of the acute toxicity of commercial bio-based polymer leachates on marine plankton

Conventional plastics have become a major environmental concern due to their persistence and accumulation in marine ecosystems. The development of potential degradable polymers (PBP), such as polyhydroxyalkanoates (PHAs) and polylactic acid (PLA), has gained attention as an alternative to mitigate plastic pollution, since they have the potential to biodegrade under certain conditions, and their production is increasing as replacement of conventional polyolefins. This study aimed to assess and compare the toxicity of leachates of pre-compounding PBP (PLA and the PHA, polyhydroxybutyrate-covalerate (PHBv)) and polypropylene (PP) on five marine planktonic species. A battery of standard bioassays using bacteria, microalgae, sea urchin embryos, mussel embryos and copepod nauplii was conducted to assess the toxicity of leachates from those polymers. Additionally, the presence of chemical additives in the leachates was also verified through GC-MS and LC-HRMS analysis. Results showed that PHBv leachates exhibited higher toxicity compared to other polymers, with the microalgae Rhodomonas salina, being the most sensitive species to the tested leachates. On the other hand, PP and PLA generally displayed minimal to no toxicity in the studied species. Estimated species sensitivity distribution curves (SSD) show that PHBv leachates can be 10 times more hazardous to marine plankton than PP or PLA leachates, as demonstrated by the calculated Hazardous Concentration for 5 % of species (HC5). Qualitative chemical analysis supports the toxicological results, with 80 % of compounds being identified in PHBv leachates of which 2,4,6-trichlorophenol is worth mentioning due to the deleterious effects to aquatic biota described in literature. These findings underscore the fact that whereas environmental persistence can be targeted using PBP, the issue of chemical safety remains unsolved by some alternatives, such as PHBv. Gaining a comprehensive understanding of the toxicity profiles of PBP materials through a priori toxicological risk assessment is vital for their responsible application as alternatives to conventional plastics.

Prediction of Potential Risk for Flupyradifurone and Its Transformation Products to Hydrobionts

Flupyradifurone (FPF) is considered the latest generation of neonicotinoid insecticides. Here, we investigated the toxicity and ecological risk of FPF and its aerobic transformation products (TPs) to aquatic species using the method of prediction. We found that FPF exhibited moderate or high toxicity to some aquatic species. The 5% hazardous concentration of FPF was 3.84 μg/L for aquatic organisms. We obtained 91 aerobic TPs for FPF, and almost half of FPF TPs exhibited toxicity to fish or Daphnia. Eleven of the TPs of FPF exhibited a high or moderate risk to aquatic ecosystems. All FPF TPs with high and moderate risks contained a 6-chloropyridine ring structure, indicating that the derivant of a pyridine ring exhibits potential risks to aquatic ecosystems. Our results provide insight into the potential risk of FPF to aquatic ecosystems and could be used to help set criteria to control pollution caused by FPF.

Environmental and occupational exposure to bisphenol compounds in Finland

The aim of the study was to assess non-occupational and occupational exposure to bisphenol compounds in Finland. The participants were 151 non-occupationally exposed volunteers and 15 potentially exposed employees of a sewage-pipe relining company and a floor-coating company. The following chemicals were measured in the urine samples: bisphenol A (BPA), bisphenol F (BPF), bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE), and the metabolites of the latter two [bisphenol A (2,3-dihydroxypropyl) glycidyl ether (BADGE·H2O), bisphenol A bis(2,3-dihydroxypropyl) ether (BADGE·2 H2O), bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) ether (BADGE·HCl·H2O), bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether (BADGE·HCl), and bisphenol A bis(3-chloro-2-hydroxypropyl) ether (BADGE·2HCl) and bisphenol F bis(2,3-dihydroxypropyl) ether (BFDGE·2 H2O), and bisphenol F bis(3-chloro-2-hydroxypropyl) ether (BFDGE·2HCl)]. BADGE and BFDGE were also measured in breathing zone air samples and hand-wipe samples of the sewage-pipe relining and floor-coating workers. Non-occupational exposure to BPA has decreased in Finland. The BPF level of the non-occupationally exposed was higher than the respective levels reported in the recent literature. BPA and BPF concentrations in the workers' urine samples were in the same range as those in the corresponding concentrations of the non-occupationally exposed population. Higher concentrations of BADGE and BFDGE metabolites were found in some of the workers' urine samples. Elevated urine concentrations were also observed in the samples collected the next morning. Some of the urinary BADGE and BFDGE metabolite results correlated with the hand-wipe results. The results show that occupational exposure to BADGE and BFDGE may occur in sewage-pipe relining and floor-coating work. They also indicate that dermal contamination plays a role in total exposure. Although the measured urinary levels indicate that the absorption of these bisphenol compounds are unlikely to pose a systemic health risk, the risk of dermal sensitization remains.

Mass Spectrometric Study of the Most Common Potential Migrants Extractible from the Inner Coatings of Metallic Beverage Cans

Population exposure to endocrine disrupting chemical- bisphenols, which are used commonly in food containers and drinking water pipes in Europe, is above acceptable health and safety levels, according to updated research data. In order to evaluate the most abundant potential migrants in canned sweetened beverages marketed in Poland, we performed the HPLC-MS screening test of the migrants present in the can coating material. The analyzed samples represented the three top-ranked companies of the global soft drink market; it is reasonable to assume that the obtained data are of global validity. The tested can coatings and beverages contained bisphenols conjugates such as five butoxyethanol (BuOEtOH) adducts with bisphenol A diglycidyl ether (BADGE), one butoxyethanol adduct with bisphenol A monoglycidyl ether (BAMGE), and cyclo-di-BADGE. The performed HPLC-MS/MS analysis in the MRM mode enabled evaluation of the concentrations of the detected conjugates in canned beverages which were found to be very low, namely at the level of 1 µg/L. On the other hand, the high consumption of canned beverages may yield a risk associated with the presence of these compounds in the diet. The subsequent HPLC-QTOF-MS/MS experiments allowed, for the first time, a detailed determination of the fragmentation pathways of the detected migrants as well as detection of the isomers of the two migrants, namely BADGE + BuOEtOH and BADGE + BuOEtOH + HCl.

Measurement of Bisphenol A Diglycidyl Ether (BADGE), BADGE derivatives, and Bisphenol F Diglycidyl Ether (BFDGE) in Japanese infants with NICU hospitalization history

BACKGROUND

Bisphenol A diglycidyl ether (BADGE) and Bisphenol F diglycidyl ether (BFDGE) are used in medical devices, such as intravenous sets, syringes, and catheters. Several studies have reported that these compounds are endocrine disruptors, cytotoxic, and genotoxic, raising concerns about their adverse effects on infants, in a stage of remarkable growth and development. The present study aimed to measure the serum concentrations of BADGE, derivatives of BADGE, and BFDGE in infants and examine the factors that influence them.

METHODS

Ten infants admitted to the neonatal intensive care unit (NICU) were enrolled in the present study. Blood samples from each infant and questionnaires from their mothers were collected twice, at 1-2 months and 7 months of age. BADGE, BADGE·H2O, BADGE·2H2O, and BFDGE were quantified using liquid chromatography-tandem mass spectrometry (LC-MS/MS).

RESULTS

Serum BADGE·2H2O was identified in all infants, at both 1-2 months (2.30-157.58 ng/ml) and 7 months of age (0.86-122.85 ng/ml). One of the two infants who received invasive ventilation showed a substantially increased BADGE·2H2O concentration. There was no significant difference in BADGE·2H2O concentrations at 7 months of age between the group that ate commercial baby food at least ≥ 1 time per week and the group that did not.

CONCLUSIONS

BADGE·2H2O was detected in the serum of all infants with a history of NICU hospitalization. Future studies are needed to determine the source of BADGE exposure and investigate its effects on infant development.

A vision for safer food contact materials: Public health concerns as drivers for improved testing

Food contact materials (FCMs) and food contact articles are ubiquitous in today's globalized food system. Chemicals migrate from FCMs into foodstuffs, so called food contact chemicals (FCCs), but current regulatory requirements do not sufficiently protect public health from hazardous FCCs because only individual substances used to make FCMs are tested and mostly only for genotoxicity while endocrine disruption and other hazard properties are disregarded. Indeed, FCMs are a known source of a wide range of hazardous chemicals, and they likely contribute to highly prevalent non-communicable diseases. FCMs can also include non-intentionally added substances (NIAS), which often are unknown and therefore not subject to risk assessment. To address these important shortcomings, we outline how the safety of FCMs may be improved by (1) testing the overall migrate, including (unknown) NIAS, of finished food contact articles, and (2) expanding toxicological testing beyond genotoxicity to multiple endpoints associated with non-communicable diseases relevant to human health. To identify mechanistic endpoints for testing, we group chronic health outcomes associated with chemical exposure into Six Clusters of Disease (SCOD) and we propose that finished food contact articles should be tested for their impacts on these SCOD. Research should focus on developing robust, relevant, and sensitive in-vitro assays based on mechanistic information linked to the SCOD, e.g., through Adverse Outcome Pathways (AOPs) or Key Characteristics of Toxicants. Implementing this vision will improve prevention of chronic diseases that are associated with hazardous chemical exposures, including from FCMs.

Interaction between environmental pollutants and cancer drug efficacy: Bisphenol A, Bisphenol A diglycidyl ether and Perfluorooctanoic acid reduce vincristine cytotoxicity in acute lymphoblastic leukemia cells

Every day, we are exposed to many environmental pollutants that can enter our body through different routes and cause adverse effects on our health. Epidemiological studies suggest that these pollutants are responsible for approximately nine million deaths per year. Acute lymphoblastic leukemia (ALL) represents one of the major cancers affecting children, and although substantial progress has been made in its treatment, relapses are frequent after initial treatment and are now one of the leading causes of cancer-related death in pediatric patients. Currently, relatively little attention is paid to pollutant exposure during drug treatment and this is not taken into account for dose setting or regulatory purposes. In this work, we investigated how bisphenol A (BPA), its derivative bisphenol A diglycidyl ether (BADGE), and perfluorooctanoic acid (PFOA) alter vincristine treatment in ALL when administered before or together with the drug. We found that these three pollutants at nanomolar concentrations, lower than those established by current regulations, can reduce the cytotoxic effects of vincristine on ALL cells. Interestingly, we found that this is only achieved when exposure to pollutants occurs prior to administration of the chemotherapeutic drug. Moreover, we found that this effect could be mediated by activation of the PI3K/AKT pathway and stabilization of microtubules. This work strengthens the idea of starting to take into account exposure to pollutants to improve the efficacy of chemotherapy treatments.

Bisphenol A and its substitutes in the aquatic environment: Occurrence and toxicity assessment

Bisphenol A is classified as a high production volume chemical commonly used in the manufacture of polycarbonate plastics, epoxy resins and thermal paper. The endocrine disrupting properties of this xenobiotic have led to the restriction and prohibition of its use in many consumer products. To date, many chemical compounds with a chemical structure similar to bisphenol A have been used in consumer products as its replacement. The ubiquitous occurrence of bisphenol A and its substitutes in the environment and their endocrine activity as well as adverse effects on aquatic organisms is a global concern, especially because many available literature reports show that many substitutes (e.g. bisphenol AF, bisphenol AP, bisphenol B, bisphenol C, bisphenol F, bisphenol G, bisphenol FL, tetrabromobisphenol A) exert adverse effects on aquatic organisms, similar to, or even stronger than bisphenol A. Therefore, the objective of this paper is to provide a comprehensive overview of the production, sources, occurrence and associated toxicity, as well as the endocrine activity of bisphenol A and its substitutes on aquatic species. The environmental levels and ecotoxicological data presented in this review allowed for a preliminary assessment and prediction of the risk of bisphenol A and its substitutes for aquatic organisms. Furthermore, the data collected in this paper highlight that several compounds applied in bisphenol A-free products are not safe alternatives and regulations regarding their use should be introduced.

Human dietary exposure to bisphenol-diglycidyl ethers in China: Comprehensive assessment through a total diet study

Despite the widespread use of bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE) in various consumer products as protective plasticizer, studies on human dietary exposure to these compounds are scare. In this study, nine bisphenol diglycidyl ethers (BDGEs) including BADGE, BFDGE, and seven of their derivatives were determined in the Chinese adult population based on composite dietary samples collected from the sixth (2016-2019) China total diet study (TDS). Contamination level of nine BDGEs was determined in 288 composite dietary samples from 24 provinces in China. BADGE·2H₂O and BADGE are the most frequently detected and BADGE·2H₂O presented the highest mean concentration (2.402 μg/kg). The most contaminated food composite is meats, with a mean ∑₉BDGEs of 8.203 μg/kg, followed by aquatic products (4.255 μg/kg), eggs (4.045 μg/kg), and dairy products (3.256 μg/kg). The estimated daily intake (EDI) of ∑₉BDGEs based on the mean and 95th percentile concentrations are 121.27 ng/kg bw/day and 249.71 ng/kg bw/day. Meats, eggs, and aquatic products are the main source of dietary exposure. Notably, beverages and water, alcohols were the main contributors of dietary exposure to BADGE and BADGE·2H₂O, followed by animal-derived foods. Dietary exposure assessment demonstrated that human dietary BDGEs do not pose risks to general population based on the mean and 95th percentile hazard index with < 1. This is the first comprehensive national dietary exposure assessment of BDGEs in Chinese general population.

Placental transfer of bisphenol diglycidyl ethers (BDGEs) and its association with maternal health in a population in South of China

Despite high production and usage, little is known about exposure to bisphenol diglycidyl ethers (BDGEs) and their derivatives in pregnant women and fetuses. In this study, we determined nine BDGEs in 106 paired maternal and cord serum samples collected from e-waste dismantling sites in South of China. Bisphenol A bis (2,3-dihydroxypropyl) glycidyl ether (BADGE·2H2O), bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) glycidyl ether (BADGE·HCl·H2O), and bisphenol F diglycidyl ether (BFDGE) were the major BDGEs, with median concentrations of 0.57, 4.07, and 1.60 ng/mL, respectively, in maternal serum, and of 3.58, 5.61, and 0.61 ng/mL, respectively, in cord serum. The transplacental transfer efficiencies (TTEs) were estimated for BDGEs found in samples, and median values were in the range of 0.98 (BFDGE) to 5.91 (BADGE·2H2O). Our results suggested that passive diffusion plays a role in the placental transfer of BADGE·HCl·H2O and BFDGE, whereas several mechanisms contribute to the high accumulation of BADGE·2H2O in cord serum. Multiple linear regression analysis indicated significant associations between maternal serum concentrations of BDGEs and blood clinical biomarkers, especially those related to liver injuries, such as alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), and adenosine deaminase (ADA) (P < 0.05). To our knowledge, this is the first study to report the occurrence of BDGEs in paired maternal-fetal serum samples and provide new insights into prenatal and fetal exposures. The newly discovered TTEs in maternal-fetal pairs contribute to a fuller inventory of the transmission activity of pollutants in the human body, ultimately adding to a more significant comprehensive risk evaluation.

Bisphenol-diglycidyl ethers in paired urine and serum samples from children and adolescents: Partitioning, clearance and exposure assessment

Bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE), and their derivatives are frequently used in food packaging materials. Some toxicological studies have shown that the endocrine-disrupting activities of these compounds are similar to or higher than those of bisphenol A (BPA), which may also adversely affect the growth and development of children and adolescents. Here, we investigated nine bisphenol-diglycidyl ethers (BDGEs) in 181 paired urine and serum samples from children and adolescents from Beijing to determine their partitioning, clearance and exposure levels. The results showed that nine BDGEs were detected in 181 urine and serum samples from children and adolescents from Beijing. Bisphenol A bis(2,3-dihydroxypropyl) glycidyl ether (BADGE·2H₂O) was the primary pollutant. The daily intake of ∑BDGEs was 15.217 ng/kg bw/day among children and adolescents in Beijing. The ranking of BDGEs in terms of renal clearance rate (CL_renal) in this study population was BADGE > BADGE·2H₂O > BFDGE > bisphenol F bis(3-chloro-2-hydroxypropyl) glycidyl ether (BFDGE·2HCl) > bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) glycidyl ether (BADGE·HCl·H₂O). In addition, the serum and urine ratios (S/U ratios) of BFDGE·2HCl, BADGE·2H₂O, BFDGE, BADGE, and BADGE·HCl·H₂O were higher than 1, indicating that these contaminants have a higher enrichment capacity in human blood. To our knowledge, this is the first study on the partitioning and renal clearance rate of BDGEs in paired urine and serum samples from children and adolescents.

Food and beverage can coatings: A review on chemical analysis, migration, and risk assessment

The internal surface of food and beverage cans is generally covered with polymeric coatings to preserve food and protect metal substrate from corrosion. Coating materials are complex formulations that contain different starting substances (e.g., monomers, prepolymers, additives, etc.) and in addition during the manufacture of the material several compounds can be formed (e.g., reaction products, degradation products, etc.). These substances have the potential to migrate into the food. Many of them have not been identified and only some have been toxicologically evaluated. This article aims to provide a comprehensive review on the analytical methods used for the identification of potential migrants in can coatings. The migration and exposure to chemicals migrating from can coatings are also reviewed and discussed so far, which is essential for risk assessment. Moreover, a brief section on the current status of the legislation on varnishes and coatings for food contact in Europe is also presented. Liquid chromatography coupled to diode array and fluorescence detectors and particularly to mass spectrometry and gas chromatography-tandem mass spectrometry seem to be the techniques of choice for the identification of potential migrants in can coatings. Some studies have reported migration levels of BPA (bisphenol A) and BADGE (bisphenol A diglycidyl ether) and derivatives exceeding the specific migration limits set in the European legislation. On the whole, low dietary exposure to migrants from can coatings has been reported. However, it is interesting to highlight that in these studies the combined exposure to multiple chemicals has not been considered.

RTP: One Effective Platform to Probe Reactive Compound Transformation Products and Its Applications for a Reactive Plasticizer BADGE

Reactive compounds, such as covalent toxicants/drugs, have their ubiquitous occurrences and are known to react with protein or DNA in human beings, but their reactions with endogenous metabolites are rarely understood. Currently, a viable platform is demanded for discovering their reaction products since their efficacy/toxicity may be altered after the reaction. We aim to develop a platform for identifying unknown abiotic or biotransformation products for these reactive compounds. Based on stable isotope-labeling (SIL) metabolomics, we have developed a novel and robust analytical platform, reactive compound transformation profiler (RTP), which can automatically analyze preannotated high-resolution mass spectrometry (LC-HRMS) data sets and uncover probable transformation products. Generally, RTP consists of four complementary steps: (1) selecting peak pairs of light and heavy-labeled products, (2) defining the "core structure mass" for possible reaction search, (3) constructing an endogenous metabolite reaction database, and (4) developing algorithms to propose the potential transformation products by searching against the database with a single-/multiple-site reaction. Its performance was validated using the reactive plasticizer bisphenol A diglycidyl ether (BADGE) in several sample matrices. This platform enabled the identification of novel transformation products while also demonstrating its capacity to filter out the false-positive signals and provide product annotation. The RTP is freely accessible at https://github.com/FangLabNTU/Reactive-Compound-Transformation-Profiler-RTP-.