Toxicity of iron-based nanoparticles to green algae: Effects of particle size, crystal phase, oxidation state and environmental aging

Ferric Oxide Nanomaterials and Plant-Rhizobacteria Symbionts Cogenerate Iron Plaque for Removing Highly Chlorinated Contaminants in Dryland Soils

Rhizosphere iron plaques derived from Fe-based nanomaterials (NMs) are a promising tool for sustainable agriculture. However, the requirement for flooded conditions to generate iron plaque limits the scope of the NM application. In this study, we achieved in situ Fenton oxidation of a highly chlorinated persistent organic pollutant (2,2',4,5,5'-pentachlorobiphenyl, PCB101) through iron plaque mediated by the interaction between α-Fe2O3 NMs and plant-rhizobacteria symbionts under dryland conditions. Mechanistically, the coexistence of α-Fe2O3 NMs and Pseudomonas chlororaphis JD37 stimulated alfalfa roots to secrete acidic and reductive agents as well as H2O2, which together mediated the rhizosphere Fenton reaction and converted α-Fe2O3 NMs into iron plaque rich in Fe(II)-silicate. Further verifications reproduced the Fenton reaction in vitro using α-Fe2O3 NMs and rhizosphere compounds, confirming the critical role of •OH in the oxidative degradation of PCB101. Significant reductions in PCB101 content by 18.6%, 42.9%, and 23.2% were respectively found in stem, leaf, and soil after a 120-d treatment, proving the effectiveness of this NMs-plant-rhizobacteria technique for simultaneously safe crop production and soil remediation. These findings can help expand the potential applications of nanobio interaction and its mediated iron plaque generation for both agricultural practice and soil remediation.

Moderate oxidation of algae-laden water: Principals and challenges

The occurrence of seasonal algae blooms represents a huge dilemma for water resource management and has garnered widespread attention. Therefore, finding methods to control algae pollution and improve water quality is urgently needed. Moderate oxidation has emerged as a feasible way of algae-laden water treatment and is an economical and prospective strategy for controlling algae and endogenous and exogenous pollutants. Despite this, a comprehensive understanding of algae-laden water treatment by moderate oxidation, particularly principles and summary of advanced strategies, as well as challenges in moderate oxidation application, is still lacking. This review outlines the properties and characterization of algae-laden water, which serve as a prerequisite for assessing the treatment efficiency of moderate oxidation. Biomass, cell viability, and organic matter are key components to assessing moderate oxidation performance. More importantly, the recent advancements in employing moderate oxidation as a treatment or pretreatment procedure were examined, and the suitability of different techniques was evaluated. Generally, moderate oxidation is more promising for improving the solid-liquid separation process by the reduction of cell surface charge (stability) and removal/degradation of the soluble algae secretions. Furthermore, this review presents an outlook on future research directions aimed at overcoming the challenges encountered by existing moderate oxidation technologies. This comprehensive examination aims to provide new and valuable insights into the moderate oxidation process.

Advancements in Nano-Enhanced microalgae bioprocessing

Microalgae are promising sources of valuable compounds: carotenoids, polyunsaturated fatty acids, lipids, etc. To overcome the feasibility challenge due to low yield and attain commercial potential, researchers merge technologies to enhance algal bioprocess. In this context, nanomaterials are attractive for enhancing microalgal bioprocessing, from cultivation to downstream extraction. Nanomaterials enhance biomass and product yields (mainly lipid and carotenoids) through improved nutrient uptake and stress tolerance during cultivation. They also provide mechanistic insights from recent studies. They also revolutionize harvesting via nano-induced sedimentation, flocculation, and flotation. Downstream processing benefits from nanomaterials, improving extraction and purification. Special attention is given to cost-effective extraction, showcasing nanomaterial integration, and providing a comparative account. The review also profiles nanomaterial types, including metallic nanoparticles, magnetic nanomaterials, carbon-based nanomaterials, silica nanoparticles, polymers, and functionalized nanomaterials. Challenges and future trends are discussed, emphasizing nanomaterials' role in advancing sustainable and efficient microalgal bioprocessing, unlocking their potential for bio-based industries.

Synergistic promotion of microalgal growth and copper removal from synthetic wastewater by nanoscale zero-valent iron particles

The increasing concentrations of heavy metals in livestock wastewater pose a serious threat to the environmental safety and human health, limiting its resource utilisation. In the present study, microalgae and nanoscale zero-valent iron were selected to construct a coupled system for copper-containing wastewater treatment. The addition of 50 mg·L-1 nanoscale zero-valent iron (50 nm) was the optimal value for the experiment, which could significantly increase the biomass of microalgae. In addition, nanoscale zero-valent iron stimulated microalgal secretion of extracellular polymeric substances, increasing the contents of binding sites, organic ligands, and functional groups on the microalgal surfaces and ultimately promoting the settling of microalgae and binding of heavy metals. The coupled system could quickly adapt to copper-containing wastewater of 10 mg·L-1, and the copper removal rate reached 94.99%. Adsorption and uptake by organisms, together with the contribution of zero-valent iron nanoparticles, are the major copper removal pathways. Overall, this work offers a novel technical solution for enhanced treatment of copper-containing livestock wastewater, which will help improve the efficiency and quality of wastewater treatment.

Molecular mechanism of dissolvable metal nanoparticles-enhanced CO2 fixation by algae: Metal-chlorophyll synthesis

Algae-driven photosynthetic CO2 fixation is a promising strategy to mitigate global climate changes and energy crises. Yet, the presence of metal nanoparticles (NPs), particularly dissolvable NPs, in aquatic ecosystems introduces new complexities due to their tendency to release metal ions that may perturb metabolic processes related to algal CO2 fixation. This study selected six representative metal NPs (Fe3O4, ZnO, CuO, NiO, MgO, and Ag) to investigate their impacts on CO2 fixation by algae (Chlorella vulgaris). We discovered an intriguing phenomenon that bivalent metal ions released from the metal NPs, especially from ZnO NPs, substituted Mg2+ within the porphyrin ring. This interaction led to 81.8% and 76.1% increases in Zinc-chlorophyll and Magnesium-chlorophyll contents within algal cells at 0.01 mM ZnO NPs, respectively. Integrating metabolomics and transcriptomics analyses revealed that ZnO NPs mainly promoted the photosynthesis-antenna protein pathway, porphyrin and chlorophyll metabolism, and carbon fixation pathway, thereby mitigating the adverse effects of Zn2+ substitution in light harvesting and energy transfer for CO2 fixation. Ultimately, the genes encoding Rubisco large subunit (rbcL) responsible for CO2 fixation were upregulated to 2.60-fold, resulting in a 76.3% increase in carbon fixation capacity. Similar upregulations of rbcL expression (1.13-fold) and carbon fixation capacity (76.1%) were observed in algal cells even at 0.001 mM ZnO NPs, accompanied by valuable lipid accumulation. This study offers novel insights into the molecular mechanism underlying NPs on CO2 fixation by algae and potentially introduces strategies for global carbon sequestration.

The effects of iron-based nanomaterials (Fe NMs) on plants under stressful environments: Machine learning-assisted meta-analysis

Mitigating the adverse effects of stressful environments on crops and promoting plant recovery in contaminated sites are critical to agricultural development and environmental remediation. Iron-based nanomaterials (Fe NMs) can be used as environmentally friendly nano-fertilizer and as a means of ecological remediation. A meta-analysis was conducted on 58 independent studies from around the world to evaluate the effects of Fe NMs on plant development and antioxidant defense systems in stressful environments. The application of Fe NMs significantly enhanced plant biomass (mean = 25%, CI = 20%-30%), while promoting antioxidant enzyme activity (mean = 14%, CI = 10%-18%) and increasing antioxidant metabolite content (mean = 10%, CI = 6%-14%), reducing plant oxidative stress (mean = -15%, CI = -20%∼-10%), and alleviating the toxic effects of stressful environments. The observed response was dependent on a number of factors, which were ranked in terms of a Random Forest Importance Analysis. Plant species was the most significant factor, followed by Fe NM particle size, duration of application, dose level, and Fe NM type. The meta-analysis has demonstrated the potential of Fe NMs in achieving sustainable agriculture and the future development of phytoremediation.

Risk implications induced by behaviors of artificial and pavement-generated TWPs in river water: Role of particle-self properties and incubation aging

Here, we investigated the pristine properties of three typical tire wear particles (TWPs) and their aging properties after incubation in runoff (primary aging) and sewage (further aging), and captured the differences in the behavioral characteristics of nine TWPs in river water, with a view to paving the way for revealing the intrinsic mechanism of the hydroecological effects of TWPs. Our results highlight that the generation modes of three pristine tire wear particles (TWPs), stemming from typical tire and road wear processes-specifically, rolling friction (R-TWPs) and sliding friction (S-TWPs), alongside cryogenically milled tire treads (C-TWPs)-significantly impact their pristine physicochemical properties. This impact encompasses surface structure, particle size (D [4,3]: 8.5-121.3 μm), surface potential (-10.4 ∼ -1.8 mV), contact angle (95.2-129.8°), density (1.09-1.75 kg/m3), etc., consequently, these differences significantly influence their migration capability and sorption capacity during the incubation and aging in runoff and sewage. Interestingly, after incubation and aging in the migrating aqueous phase, particularly with additional aging in sewage, not only do distinctions in the aforementioned physicochemical properties (namely, particle size (5.6-6.6 μm), surface potential (-18.4 ∼ -18.1 mV), contact angle (124.5-125.4°), density (1.05-1.16 kg/m3)) among various types of TWPs diminish, but the environmental behaviors (encompassing, desorption capacity, aggregation kinetics, photochemical activity-formation of persistent free radicals, and exudation-derivative (6PPD-Quinone) of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine: 6PPD) exhibited by this array of TWPs demonstrate a remarkable coherence within the downstream river water. Concerningly, the aforementioned features of aquatic system behaviors appear to be predisposed towards exacerbating the heightened toxicity of TWPs, for example, the leaching concentration of 6PPD-Q increased by two to three times after aging, aligning with established precedents regarding the toxicological causes associated with the quinone derivatives of antioxidants in rubber contaminants.

Impact of nanopollution on plant growth, photosynthesis, toxicity, and metabolism in the agricultural sector: An updated review

Nanotechnology provides distinct benefits to numerous industrial and commercial fields, and has developed into a discipline of intense interest to researchers. Nanoparticles (NPs) have risen to prominence in modern agriculture due to their use in agrochemicals, nanofertilizers, and nanoremediation. However, their potential negative impacts on soil and water ecosystems, as well as plant growth and physiology, have caused concern for researchers and policymakers. Concerns have been expressed regarding the ecological consequences and toxicity effects associated with nanoparticles as a result of their increased production and usage. Moreover, the accumulation of nanoparticles in the environment poses a risk, not only because of the possibility of plant damage but also because nanoparticles may infiltrate the food chain. In this review, we have documented the beneficial and detrimental effects of NPs on seed germination, shoot and root growth, plant biomass, and nutrient assimilation. Nanoparticles exert toxic effects by inducing ROS generation and stimulating cytotoxic and genotoxic effects, thereby leading to cell death in several plant species. We have provided possible mechanisms by which nanoparticles induce toxicity in plants. In addition to the toxic effects of NPs, we highlighted the importance of nanomaterials in the agricultural sector. Thus, understanding the structure, size, and concentration of nanoparticles that will improve plant growth or induce plant cell death is essential. This updated review reveals the multifaceted connection between nanoparticles, soil and water pollution, and plant biology in the context of agriculture.

Interaction of Fe2O3 nanoparticles with marine microalga Chlorella sorokiniana: Analysis of growth, morphological changes and biochemical composition

The wide utilization of iron-based nanoparticles (NPs) based on their preferential properties has led to the discharge and accumulation of these materials into the aquatic environment. In this regard, a comparative study of different concentrations of α-Fe2O3 NPs and their micro form was conducted using microalga Chlorella sorokiniana up to the stationary growth phase. This study revealed that high concentrations of NPs (100 and 200 mg L-1) imposed a stressful condition on algal cells documented by a reduction in microalga growth, including cell number and specific growth rate. The physical contact between the algal cells and NPs resulted in a shading effect as well as morphological changes validated by scanning electron microscope results. The biochemical composition of C. sorokiniana exposed to high levels of Fe2O3 NPs was also evaluated. The increase in total carbohydrate content of algal cells along with a significant reduction in unsaturated fatty acids was found. Moreover, Fe2O3 NPs exposure induced oxidative stress evidenced by an increase in lipid peroxidation. To cope with oxidative stress, superoxide dismutase activity and antioxidant potential of microalga as defensive mechanisms increased in the culture with high concentrations of NPs. Besides, due to the interactions, microalga tended to form a protective layer from further cell-NP interactions through the secretion of extracellular polymeric substances. Nonetheless, the nano form of Fe2O3 was more toxic than its micro form due to its small size. Overall, this trial may provide additional insight into the toxicological mechanism and safety assessments of Fe2O3 NPs in the aquatic environment.

From lab to ecosystem: Understanding the ecological footprints of engineered nanoparticles

Nanotechnology has attained significant attention from researchers in past decades due to its numerous advantages, such as biocompatibility, biodegradability, and improved stability over conventional drug delivery systems. The fabrication of engineered nanoparticles (ENPs), including carbon nanotubes (CNTs), fullerenes, metallic and metal oxide-based NPs, has been steadily increasing day due to their wide range of applications from household to industrial applications. Fabricated ENPs can release different materials into the environment during their fabrication process. The effect of such materials on the environment is the primary concern with due diligence on the safety and efficacy of prepared NPs. In addition, an understanding of chemistry, reactivity, fabrication process, and viable mechanism of NPs involved in the interaction with the environment is very important. To date, only a limited number of techniques are available to assess ENPs in the natural environment which makes it difficult to ascertain the impact of ENPs in natural settings. This review extensively examines the environmental effects of ENPs and briefly discusses useful tools for determining NP size, surface charge, surface area, and external appearance. In conclusion, the review highlights the potential risks associated with ENPs and suggests possible solutions.

Toxicity of ZnFe-SO4 layered double hydroxide in Tetradesmus obliquus and evaluation of some physiological responses of the microalgae for stress management

Layered double hydroxides (LDHs), regarding their physical and structural properties, have different and wide applications industry and their increasing use may raise ecological and human health concerns. However, the potential toxicity mechanisms of LDHs in different organisms are still unclear. In the present work, after synthesizing of ZnFe-SO4 LDH and studying of its characterization by XRD, FT-IR, SEM, EDX-mapping, TEM and Raman, its toxicity in Tetradesmus obliquus was evaluated. According to experimental results, the growth of the algae and content of photosynthetic pigments were significantly decreased after treatment with 100 mg/L of ZnFe-SO4 LDH. The high dose exposure to the LDH also inhibited the activity of SOD and POD enzymes, possibly due to the LDH- catalyzed reactive oxygen species production. In addition, lipid peroxidation and the content of phenolic compounds, as no-enzymatic antioxidants were increased by enhancement of the LDH concentration. The rise of phenol, flavonoids and MDA contents could be regarded as some manifestations and responses to the toxic effects of the contaminant in the algae cells. The results provided a better understanding of the undesirable effects and toxicity of LDHs in aquatic organisms.

Potential applications of green-synthesized iron oxide NPs for environmental remediation

Water pollution is a significant issue worldwide due to an increase in anthropogenic activities. Heavy metals and dyes are among the most problematic contaminants that threaten the environment and negatively impact human health. Iron oxide nanoparticles (IONPs) synthesized using green methods have shown potential in these areas due to their significant adsorption capacity and photocatalytic potential. The size and morphology of biogenic IONPs can be tailored depending upon the concentration of the reducing medium and metal salt precursor. Green-synthesized IONPs have been found to be effective, economical, and environmentally friendly with their large surface area, making them suitable for removing toxic matter from contaminated water. Furthermore, they exhibit antibacterial potential against harmful microorganisms. The study emphasizes the importance of using such environmentally friendly tools to remove heavy metal ions and organic compounds from contaminated water. The underlying mechanism for the adsorption of heavy metal ions, photocatalytic degradation of organic compounds, and antimicrobial action has been explored in detail. The future prospective for the beneficial utilization of biogenic IONPs has also been signified to provide a detailed overview.

Iron oxide nanoparticles in the soil environment: Adsorption, transformation, and environmental risk

Iron oxide nanoparticles (IONPs) have great application potential due to their multifunctional excellence properties, leading to the possibility of their release into soil environments. IONPs exhibit different adsorption properties toward environmental pollutants (e.g., heavy metals and organic compounds), thus the adsorption performance for various contaminants and the molecular interactions at the IONPs-pollutants interface are discussed. After solute adsorption, the change in the environmental behavior of IONPs is an important transformation process in the natural environments. The aggregation, aging process, and chemical/biological transformation of IONPs can be altered by soil solution chemistry, as well as by the presence of dissolved organic matter and microorganisms. Upon exposure to soil environments, IONPs have both positive and negative impacts on soil organisms (e.g., bacteria, plants, nematodes, and earthworms). Moreover, we compared the toxicity of IONPs alone to combined toxicity with environmental pollutants and pristine IONPs to aged IONPs, and the mechanisms of IONPs toxicity at the cellular level are also reviewed. Given the unanswered questions, future research should include prediction and design of IONPs, new characterization technology for monitoring IONPs transformation in soil ecosystems, and further refinement the environmental risk assessment of IONPs. This review will greatly enhance our knowledge of the performance and impact of IONPs in soil systems.

Adverse effects of iron-based nanoparticles on freshwater phytoplankton Scenedesmus armatus and Microcystis aeruginosa strains

Zero-valent nano-iron particles (nZVI) are increasingly present in freshwater aquatic environments due to their numerous applications in environmental remediation. However, despite the broad benefits associated with the use and development of nZVI nanoparticles, the potential risks of introducing them into the aquatic environment need to be considered. Special attention should be focused on primary producer organisms, the basal trophic level, whose impact affects the rest of the food web. Although there are numerous acute studies on the acute effects of these nanoparticles on photosynthetic primary producers, few studies focus on long-term exposures. The present study aimed at assessing the effects of nZVI on growth rate, photosynthesis activity, and reactive oxygen activity (ROS) on the freshwater green algae Scenedesmus armatus and the cyanobacteria Microcystis aeruginosa. Moreover, microcystin production was also evaluated. These parameters were assessed on both organisms singly exposed to 72 h-effective nZVI concentration for 10% maximal response for 28 days. The results showed that the cell growth rate of S. armatus was initially significantly altered and progressively reached control-like values at 28 days post-exposure, while M. aeruginosa did not show any significant difference concerning control values at any time. In both strains dark respiration (R) increased, unlike net photosynthesis (Pn), while gross photosynthesis (Pg) only slightly increased at 7 days of exposure and then became equal to control values at 28 days of exposure. The nZVI nanoparticles generated ROS progressively during the 28 days of exposure in both strains, although their formation was significantly higher on green algae than on cyanobacteria. These data can provide additional information to further investigate the potential risks of nZVI and ultimately help decision-makers make better informed decisions regarding the use of nZVI for environmental remediation.

Fe-Based Nanomaterials and Plant Growth Promoting Rhizobacteria Synergistically Degrade Polychlorinated Biphenyls by Producing Extracellular Reactive Oxygen Species

Plant growth promoting rhizobacteria (PGPR) produce extracellular reactive oxygen species (ROS) to protect plants from external stresses. Fe-based nanomaterials can potentially interact with PGPR and synergistically degrade organic pollutants, yet they have received no study. Here, we studied how the interaction between a typical PGPR (Pseudomonas chlororaphis, JD37) and Fe-based nanomaterials facilitated the degradation of 2,4,4'-trichlorobiphenyl (PCB28), by comparing the zerovalent iron of 20 nm (nZVI20), 100 nm (nZVI100), and 5 μm; iron oxide nanomaterials (α-Fe2O3, γ-Fe2O3, and Fe3O4) of ca. 20 nm; and ferrous and ferric salts. Although all Fe materials (0.1 g L-1) alone could not degrade aqueous PCB28 (0.1 mg L-1) under dark or aerobic conditions, nZVI20, nZVI100, α-Fe2O3, and Fe2+ promoted PCB28 degradation by JD37, with the half-life of PCB28 shortened from 16.5 h by JD37 alone to 8.1 h with nZVI100 cotreatment. Mechanistically, the nanomaterials stimulated JD37 to secrete phenazine-1-carboxylic acid and accelerated the NADH/NAD+ conversion, promoting O2*- generation; JD37 increased Fe(II) dissolution from the nanomaterials, facilitating *OH generation; and the ROS gradually degraded PCB28 into benzoic acid through dihydroxy substitution, oxidation to quinone, and Michael addition. These findings provide a new strategy of nanoenabled biodegradation of organic pollutants by applying Fe-based nanomaterials and PGPR.

Elevated nano-α-Fe2O3 enhances arsenic metabolism and dissolved organic carbon release of Microcystis aeruginosa under a phytate environment

Little information is available on the effects of nano-α-Fe2O3 on arsenic (As) metabolism of algae and potential associated carbon (C) storage in As-contaminated water with dissolved organic phosphorus (DOP) as a phosphorus (P) source. In this study, Microcystis aeruginosa (M. aeruginosa) was used to investigate impacts of nano-α-Fe2O3 on cell growth and As metabolism of algae under a phytate (PA) environment as well as potential associated C storage. Results showed that nano-α-Fe2O3 had a subtle influence on algal cell growth in a PA environment. Herein, algal cell density (OD680) and chlorophyll a (Chla) were inhibited at elevated nano-α-Fe2O3 levels, which simultaneously limited the decrease of Yield. As suggested, the complexation of PA with nano-α-Fe2O3 could alleviate the negative influence on algal cell growth. Furthermore, the elevated nano-α-Fe2O3 increased As methylation in the PA environment due to higher monomethylarsenic (MMA) and dimethylarsenic (DMA) concentrations in the test media. Additionally, microcystins (MCs) in the media changed consistently with UV254, both of which were relatively lower at 10.0 mg·L-1 nano-α-Fe2O3. Enhanced As(V) methylation of algal cells was found to simultaneously reduce the release risk of As(III) and MC while increasing dissolved organic carbon (DOC) content in media, suggesting unfavorable C storage. Three-dimensional fluorescence analysis revealed that the main DOC constituent was the tryptophan-like component in aromatic proteins. Correlation analysis showed that decreases in pH and the zeta potential and an increase in Chla may lead to metabolic As improvements in M. aeruginosa. The obtained findings highlight the need for greater focus on the potential risks of DOP combined with nano-α-Fe2O3 on algal blooms as well as the biogeochemical cycling processes of As and C storage in As-contaminated water with DOP as the P source.

Toxicity of Nanoscale Zero-Valent Iron to Soil Microorganisms and Related Defense Mechanisms: A Review

Soil pollution is a global environmental problem. Nanoscale zero-valent iron (nZVI) as a kind of emerging remedial material is used for contaminated soil, which can quickly and effectively degrade and remove pollutants such as organic halides, nitrates and heavy metals in soil, respectively. However, nZVI and its composites can enter the soil environment in the application process, affect the physical and chemical properties of the soil, be absorbed by microorganisms and affect the growth and metabolism of microorganisms, thus affecting the ecological environment of the entire soil. Because of the potential risks of nZVI to the environment and ecosystems, this paper summarizes the current application of nZVI in the remediation of contaminated soil environments, summarizes the various factors affecting the toxic effects of nZVI particles and comprehensively analyzes the toxic effects of nZVI on microorganisms, toxic mechanisms and cell defense behaviors to provide a theoretical reference for subsequent biosafety research on nZVI.

Deciphering the toxicity mechanism of haloquinolines on Chlorella pyrenoidosa using QSAR and metabolomics approaches

The hazardous potential of haloquinolines (HQLs) is becoming an issue of great concern due to its wide and long-term usage in many personal care products. We examined the growth inhibition, structure-activity relationship, and toxicity mechanism of 33 HQLs on Chlorella pyrenoidosa using the 72-h algal growth inhibition assay, three-dimensional quantitative structure-activity relationship (3D-QSAR), and metabolomics. We found that the IC₅₀ (half maximal inhibitory concentration) values for 33 compounds ranged from 4.52 to > 150 mg·L^-1, most tested compounds were toxic (1 mg·L^-1 < IC₅₀ < 10 mg·L^-1) or harmful (10 mg·L^-1 < IC₅₀ < 100 mg·L^-1) for the aquatic ecosystem. Hydrophobic properties of HQLs dominate their toxicity. Halogen atoms with large volume appear at the 2, 3, 4, 5, 6, and 7-positions of the quinoline ring to significantly increase the toxicity. In algal cells, HQLs can block diverse carbohydrates, lipids, and amino acid metabolism pathways, thereby resulting in energy usage, osmotic pressure regulation, membrane integrity, oxidative stress disorder, thus fatally damaging algal cells. Therefore, our results provide insight into the toxicity mechanism and ecological risk of HQLs.

Enhancing arsenate metabolism in Microcystis aeruginosa and relieving risks of arsenite and microcystins by nano-Fe2O3 under dissolved organic phosphorus conditions

Little information is available on how nano-Fe₂O₃ substituted iron ions as a possible iron source impacting on algal growth and arsenate (As(V)) metabolism under dissolved organic phosphorus (DOP) (D-glucose-6-phosphate (GP)) conditions. We investigated the growth of Microcystis aeruginosa and As(V) metabolism together with their metabolites in As(V) aquatic environments with nano-Fe₂O₃ and GP as the sole iron and P sources, respectively. Results showed that nano-Fe₂O₃ showed inhibitory effects on M. aeruginosa growth and microcystin (MCs) release under GP conditions in As(V) polluted water. There was little influence on As species changes in GP media under different nano-Fe₂O₃ concentrations except for obvious total As (TAs) removal in 100 mg L^-1 nano-Fe₂O₃ levels. As(V) metabolism dominated with As(V) biotransformation in algal cells was facilitated and arsenite (As(III)) releasing risk was relieved clearly by nano-Fe₂O₃ under GP conditions. The dissolved organic matter (DOM) in media exhibited more fatty acid analogs containing -CO, -CH₂ =CH₂, and -CH functional groups with increasing nano-Fe₂O₃ concentrations, but the fluorescent analogs were relatively reduced especially for the fluorescent DOM dominated by aromatic protein-like tryptophan which was significantly inhibited by nano-Fe₂O_3. Thus, As methylation that was facilitated in M. aeruginosa by nano-Fe₂O₃ in GP environments also caused more organic substances to release that absorb infrared spectra while reducing the release risks of As(III) and MCs as well as protein-containing tryptophan fractions. From ¹H-NMR analysis, this might be caused by the increased metabolites of aromatic compounds, organic acid/amino acid, and carbohydrates/glucose in algal cells. The findings are vital for a better understanding of nano-Fe₂O₃ role-playing in As bioremediation by microalgae and the subsequent potential aquatic ecological risks.

Natural nanocolloids regulate the fate and phytotoxicity of hematite particles in water

Hematite (the most abundant iron oxide polymorph) is widely detected in the water environment and has attracted considerable attention. Natural nanocolloids (Ncs) exist ubiquitously in surface waters and play critical roles in biogeochemical processes. However, the influences of Ncs on the fate and phytotoxicity of hematite remain unknown. In this study, the infrared absorption spectra coupled with two-dimensional correlation spectroscopy analysis reveal that the specific binding interactions between Ncs and hematite primarily occur via hydrophilic effects and π-π interactions with an increase in the Ncs contact time. Moreover, binding with Ncs slightly promoted the aggregation rates of hematite particles in the BG-11 medium. Interestingly, Ncs remarkably mitigate the phytotoxicity (e.g., growth inhibition, oxidative stress, and mitochondrial toxicity) of nanosized and submicrosized hematite particles to Chlorella vulgaris after a 96 h exposure. The integrating metabolomic and transcriptomic analysis reveals that the regulated urea cycle, amino acids, and fatty acid-related metabolites (e.g., urea, serine, glutamate, and hexadecenoic acid) and genes (e.g., ACY1, CysC, and GLA) contribute to persistent phytotoxicity. This study provides new insights into the roles and mechanisms of natural Ncs in regulating the environmental risk of iron oxide minerals in aqueous media.

Impacts of engineered iron nanoparticles on oxidative stress, fatty acid composition, and histo-architecture of the smooth scallop Flexopecten glaber

Engineered iron nanoparticles are widely used in environmental remediation, yet their potential toxic effects on marine biota remain poorly elucidated. This study aimed to gain insight into the nanoscale zero-valent iron (NZVI) toxicity mechanisms for marine invertebrates. Aside from the effect on oxidative status and histopathology, the effect of NZVI on lipid metabolism in bivalves was studied for the first time. To this end, specimens of Flexopecten glaber were exposed to ascending concentrations (0.5, 1, and 1.5 mg/L) of NZVI for 96 h. Results illustrate differential patterns of iron accumulation in the gills and the digestive gland. By increasing NZVI concentrations, the total iron level tended to markedly increase in the gills and decrease in the digestive gland, reaching 132 and 37.6 μg/g DW, respectively, in the specimens exposed to 1.5 mg/L. Biochemical and cellular biomarkers highlighted that NZVI caused oxidative stress (measured as hydrogen peroxide, malondialdehyde, and advanced oxidation protein product levels) and alterations of antioxidant defense systems, including reduced glutathione, non-protein thiol, glutathione peroxidase, superoxide dismutase, and catalase. Modulation of lipid metabolism with changed fatty acid compositions (mainly an increase in the saturation and a decrease in unsaturation levels) was also observed in both gills and digestive gland. Moreover, several histological damages, including lipofuscin accumulation, infiltrative inflammations, and digestive tubule alterations, were observed in the two studied organs, providing supplementary evidence regarding the toxic effect of NZVI. This study adds to the growing body of evidence pointing to the hazardous impacts of iron NPs on aquatic ecosystems.

Nanotechnology in agriculture: Comparison of the toxicity between conventional and nano-based agrochemicals on non-target aquatic species

Increased crop production is necessary to keep up with rising food demand. However, conventional agricultural practices and agrochemicals are unable to sustain further increases without serious risk of adverse environmental consequences. The implementation of nanotechnology in agriculture practices has been increasing in recent years and has shown tremendous potential to boost crop production. The rapid growth in development and use of nano-agrochemicals in agriculture will inevitably result in more chemicals reaching water bodies. Some unique properties of nanoformulations may also alter the toxicity of the AI on aquatic organisms when compared to their conventional counterparts. Results from studies on conventional formulations may not properly represent the toxicity of new nanoformulations in the aquatic environment. As a result, current guidelines derived from conventional formulations may not be suitable to regulate those newly developed nanoformulations. Current knowledge on the toxicity of nano-agrochemicals on aquatic organisms is limited, especially in an ecologically relevant setting. This review complies and analyzes 18 primary studies based on 7 criteria to provide a comprehensive analysis of the available toxicity information of nano-agrochemicals and their conventional counterparts on aquatic organisms. Our analysis demonstrates that the overall toxicity of nano-agrochemicals on non-target aquatic species is significantly lower as compared to conventional counterparts. However, further dividing formulations into three categories (organic, bulk and ionic) shows that some nanoformulations can be more toxic when compared to bulk materials but less toxic as compared to ionic formulations while organic nanopesticides do not show a general trend in overall toxicity. Moreover, our analysis reveals the limitations of current studies and provides recommendations for future toxicity studies to ensure the effective and sustainable application of nano-agrochemicals, which will be beneficial to both the agrochemical industry and regulatory agencies alike.

Nano-pollution: Why it should worry us

Nanoparticles are immensely diverse both in terms of quality and sources of emission into the environment. Nowadays, nanotechnologies are developing and growing at a rapid pace without specific rules and regulations, leading to a severe effect on environment and affecting the labours in outdoor and indoor workplaces. The continue and enormous use of NPs for industrial and commercial purposes, has put a pressing need to think whether the increasing use of these NPs could overcome the severe environmental effects and unknown human health risks. Only a few studies have been carried out to assess the toxic effect of these NPs resulting from their direct or indirect exposure. There is in an increasing clamour to consider environmental implications of NPs and to monitor the outcome of NP during use in biological testing. There remain many open questions for consideration. An adequate research is required to determine the real toxic effect of these NPs on environment and human health. In this review, we have discussed the negative effects of NPs on environment and biosphere at large and the future research required.

Combined Effect of NZVI and H2O2 on the Cyanobacterium Microcystis aeruginosa: Performance and Mechanism

In order to eliminate the harmful cyanobacterium Microcystis aeruginosa and the algal organic matters (AOMs) produced by M. aeruginosa, the combined process of nanoscale zero-valent iron (NZVI) and hydrogen peroxide (H₂O₂) has been carried out, and the removal mechanism has also been clarified. As the initial cyanobacterial cell concentration is 1.0 (±0.05) × 10⁵ cells·mL^-1, all the treatments of NZVI, H₂O₂, and NZVI/H₂O₂ have inhibition effects on both the Chl a contents and photosynthetic pigments, with the Chl a removal efficiency of 47.3%, 80.5%, and 90.7% on the 5th day, respectively; moreover, the variation of ζ potential is proportional to that of the Chl a removal efficiency. The malondialdehyde content and superoxide dismutase activity are firstly increased and ultimately decreased to mitigate the oxidative stress under all the treatments. Compared with NZVI treatment alone, the oxidation of the H₂O₂ and NZVI/H₂O₂ processes can effectively destroy the antioxidant enzyme system and then inactivate the cyanobacterial cells, which further leads to the release of photosynthetic pigments and intracellular organic matters (IOM); in addition, the IOM removal efficiency (in terms of TOC) is 61.3% and 54.1% for the H₂O₂ and NZVI/H₂O₂ processes, respectively. Although NZVI is much more effective for extracellular organic matters (EOM) removal, it is less effective for IOM removal. The results of the three-dimensional EEM fluorescence spectra analysis further confirm that both H₂O₂ and NZVI/H₂O₂ have the ability to remove fluorescent substances from EOM and IOM, due to the oxidation mechanism; while NZVI has no removal effect for the fluorescent substances from EOM, it can remove part of fluorescent substances from IOM due to the agglomeration. All the results demonstrate that the NZVI/H₂O₂ process is a highly effective and applicable technology for the removal of M. aeruginosa and AOMs.

Application of α-Fe2O3 nanoparticles in controlling antibiotic resistance gene transport and interception in porous media

Metal oxide nanoparticles (MONPs) with a large specific surface area are expected to bind with antibiotic resistance genes (ARGs), thereby controlling ARGs' contamination by reducing their concentration and mobilization. Here, adsorption experiments were carried out and it was found that α-Fe₂O₃ NPs could chemically bind with ARGs (tetM-carrying plasmids) in water with an adsorption rate of 0.04 min^-1 and an adsorption capacity of 7.88 g/kg. Mixing α-Fe₂O₃ NPs into quartz sand column markedly increased the interceptive removal of ARGs from inflow water. The interception rate of 1.0 μg/mL ARGs in ultrapure water (25 mL, 5 pore volumes) through the sand column (plexiglass, length 8 cm, internal diameter 1.4 cm) with 1 g/kg α-Fe₂O₃ NPs was 1.73 times of that through the pure sand column; the interception rate overall increased with increasing addition of α-Fe₂O₃ NPs, reaching 68.8% with 20 g/kg α-Fe₂O₃ NPs. Coexisting Na⁺ (20 mM), Ca²⁺ (20 mM), and acidic condition (pH 4.0) could further increase the interception rate of ARGs by 1 g/kg α-Fe₂O₃ NPs from 21.1% to 86.2%, 90.7%, and 96.2%, respectively. The presence of PO₄^3- and humic acid at environmentally relevant concentrations would not significantly affect the interception of ARGs. In the treatment groups with PO₄^3- and humic acid, the removal rate decreased by only 1.8% and 0.1%, respectively. In addition, the interceptive removal of ARGs by α-Fe₂O₃ NPs-incorporated sand column was even better in actual surface water samples (87.2%) than that in the ultrapure water (21.1%). The findings provide a promising approach to treat ARGs-polluted water.

Sediment Bacteria and Phosphorus Fraction Response, Notably to Titanium Dioxide Nanoparticle Exposure

Titanium dioxide nanoparticle (TiO₂ NP) toxicity to the growth of organisms has been gradually clarified; however, its effects on microorganism-mediated phosphorus turnover are poorly understood. To evaluate the influences of TiO₂ NPs on phosphorus fractionation and the bacterial community, aquatic microorganisms were exposed to different concentrations of TiO₂ NPs with different exposure times (i.e., 0, 10, and 30 days). We observed the adhesion of TiO₂ NPs to the cell surfaces of planktonic microbes by using SEM, EDS, and XRD techniques. The addition of TiO₂ NPs resulted in a decrease in the total phosphorus of water and an increase in the total phosphorus of sediments. Additionally, elevated TiO₂ NPs enhanced the sediment activities of reductases (i.e., dehydrogenase [0.19–2.25 μg/d/g] and catalase [1.06–2.92 μmol/d/g]), and significantly decreased the absolute abundances of phosphorus-cycling-related genes (i.e., gcd [1.78 × 10⁴–9.55 × 10⁵ copies/g], phoD [5.50 × 10³–5.49 × 10⁷ copies/g], pstS [4.17 × 10²–1.58 × 10⁶ copies/g]), and sediment bacterial diversity. TiO₂ NPs could noticeably affect the bacterial community, showing dramatic divergences in relative abundances (e.g., Actinobacteria, Acidobacteria, and Firmicutes), coexistence patterns, and functional redundancies (e.g., translation and transcription). Our results emphasized that the TiO₂ NP amount—rather than the exposure time—showed significant effects on phosphorus fractions, enzyme activity, phosphorus-cycling-related gene abundance, and bacterial diversity, whereas the exposure time exhibited a greater influence on the composition and function of the sediment bacterial community than the TiO₂ NP amount. Our findings clarify the responses of phosphorus fractions and the bacterial community to TiO₂ NP exposure in the water–sediment ecosystem and highlight potential environmental risks of the migration of untreated TiO₂ NPs to aquatic ecosystems.

Toxicity Effects of Engineered Iron Nanoparticles (Fe3O4) on the Growth, Cell Density, and Pigment Content of Chlorella vulgaris

This study investigated the effects of Fe₃O₄ nanoparticles released from synthesized thiourea catalyst on the biological aspects of Chlorella vulgaris. Fe₃O₄ concentrations (0, 10, 100, 250, 500, 750, and 1000 mg L^-1) were used for the exposure tests. Biological parameters of C. vulgaris, including cell density, cell viability, and pigment content, were assessed. Bioconcentration and bioaccumulation factors were evaluated for contaminated microalgae. Non-carcinogenic risks were then assessed using target hazard quotient (THQ) for potential risks in human consumptions. Findings showed that C. vulgaris cell number increased from 0 to 500 mg L^-1 of Fe₃O₄ concentration. Chlorophyll a represented a time-dependent response, and greatest values were detected in 250 and 500 mg L^-1 Fe₃O₄ at 4.2 and 4 mg/g, respectively. Chlorophyll b content showed a time-related manner in exposure to Fe₃O₄ with the highest values recorded at 250 mg L^-1 after 96 h. Moreover, bioaccumulation displayed a dose-dependent response at 15,000 µg/g dw in 1000 mg L^-1, whereas the lowest concentration was in the control group at 1700 µg/g dw. The bioconcentration factor showed a concentration-relevant decrease in all iron treatments and 10 mg L^-1 of Fe₃O₄ represented the greatest BCF at 327.3611. Non-carcinogenic risks illustrated negligible hazard (THQ < 1) and the largest EDI and THQ were calculated in 1000 mg L^-1 at 7.4332E-07 (mg kg^-1 day^-1) and 1.06189E-09, respectively. Together, iron is an essential trace element for biological purposes in aquatic systems, but in exceeding concentrations could impose toxicity effects to C. vulgaris populations.

A review on the generation, discharge, distribution, environmental behavior, and toxicity (especially to microbial aggregates) of nano-TiO2 in sewage and surface-water and related research prospects

This article reviews the nano-effects and applications of different crystalline nano‑titanium dioxide (nano-TiO₂), identifies their discharge, distribution, behavior, and toxicity to aquatic organisms (focusing on microbial aggregates) in sewage and surface-water, summarizes related toxicity mechanisms, and critically proposes future perspectives. The results show that: 1) based on crystal type, application boundaries of nano-TiO₂ have become clear, extending from traditional manufacturing to high-tech fields; 2) concentration of nano-TiO₂ in water is as high as hundreds of thousands of μg/L (sewage) or several to dozens of μg/L (surface-water) due to direct application or indirect release; 3) water environmental behaviors of nano-TiO₂ are mainly controlled by hydration conditions and particle characteristics; 4) aquatic toxicities of nano-TiO₂ are closely related to their water environmental behavior, in which crystal type and tested species (such as single species and microbial aggregates) also play the key role. Going forward, the exploration of the toxicity mechanism will surely become a hot topic in the aquatic-toxicology of nano-TiO₂, because most of the research so far has focused on the responses of biological indicators (such as metabolism and damage), while little is known about the stress imprint caused by the crystal structures of nano-TiO₂ in water environments. Additionally, the aging of nano-TiO₂ in a water environment should be heeded to because the continuously changing surface structure is bound to have a significant impact on its behavior and toxicity. Moreover, for microbial aggregates, comprehensive response analysis should be conducted in terms of the functional activity, surface features, composition structure, internal microenvironment, cellular and molecular level changes, etc., to find the key point of the interaction between nano-TiO₂ and microbial aggregates, and to take mitigation or beneficial measures to deal with the aquatic-toxicity of nano-TiO₂. In short, this article contributes by 1) reviewing the research status of nano-TiO₂ in all aspects: application and discharge, distribution and behavior, and its aquatic toxicity; 2) suggesting the response mechanism of microbial aggregates and putting forward the toxigenic mechanism of nanomaterial structure; 3) pointing out the future research direction of nano-TiO₂ in water environment.

Recent advances in developing innovative sorbents for phosphorus removal-perspective and opportunities

Phosphorus is an essential mineral for the growth of plants which is supplied in the form of fertilizers. Phosphorus remains an inseparable part of developing agrarian economics. Phosphorus enters waterways through three different sources: domestic, agricultural, and industrial sources. Rainfall is the main cause for washing away a large amount of phosphates from farm soils into nearby waterways. The surplus of phosphorus in the water sources cause eutrophication and degradation of the habitat with an adverse effect on aquatic life and plants. Phosphate elimination is necessary to control eutrophication in water sources. Among the different methods reported for the removal and recovery of phosphorus: ion exchange, precipitation, crystallization, and others, adsorption standout as a sustainable solution. The current review offers a comparative assessment of the literature on novel materials and techniques for the removal of phosphorus. Herein, different adsorbents, their behaviors, mechanisms, and capacity of materials are discussed in detail. The adsorbents are categorized under different heads: iron-based, silica-alumina-based, calcium-based, biochar-based wherein the metal and metal oxides are employed in phosphorus removal. The ideal attribute of adsorbent will be the utilization of spent adsorbents as a phosphate plant food and a soil conditioner in agriculture. The review provides the perspective on the current research with potential challenges and directives for possible research in the field.

Mixture toxicity of TiO2 NPs and tetracycline at two trophic levels in the marine ecosystem: Chlorella sp. and Artemia salina

Increasing usage of both nanomaterials and pharmaceuticals and their unabated release to the marine ecosystem pose a serious concern nowadays. The toxicity of the mixture of TiO₂ NPs and tetracycline (TC) in the marine species are not very well covered in prior literature. The current study explores the joint toxic effects of TiO₂ NPs and TC in a simulated marine food chain: Chlorella sp. and Artemia salina. Chlorella sp. was interacted with pristine TiO₂ NPs (0.05, 05, and 5 mg/L), TC (0.5 mg/L), and their combinations for 48 h. The toxicity induced in Chlorella sp. by pristine TiO₂ NPs through oxidative stress and chloroplast damage was not significantly changed in the presence of TC. Principal component analysis for the toxicity parameters revealed a strong association between growth inhibition and adsorption/internalization. In the second trophic level (A. salina), the waterborne exposure of TC additively increased the toxicity of TiO₂ NPs. Both adsorption and degradation played a major role in the removal of TC from the suspension, resulting in additive toxic effects in both Chlorella sp. and A. salina. Compared to the waterborne exposure, the foodborne exposure of TiO₂ NPs and TC induced lesser toxic effects owing to reduced uptake and accumulation in A. salina. Biomagnification results indicate that the dietary transfer of TiO₂ NPs and TC does not pose a serious environmental threat in this two-level marine food chain.

Fe-based nanomaterial transformation to amorphous Fe: Enhanced alfalfa rhizoremediation of PCBs-contaminated soil

Nano-enabled phytoremediation is an emerging remediation strategy for soils that are moderately contaminated with persistent organic contaminants, and there is a significant need for increased mechanistic understanding and for case studies. Herein, we evaluated the remediation of PCB28-contaminated soil using combined alfalfa and Fe-based materials, including zero-valent iron at 20 nm, 100 nm, and 5 µm, and also iron oxide nanomaterials including α-Fe₂O₃, γ-Fe₂O₃, and Fe₃O₄ around 20-30 nm. Compared with alfalfa remediation alone (63.2%), Fe-based nanomaterials increased PCB28 removal values to 72.4-93.5% in planted soil, with α-Fe₂O₃ treatment promoting the most effective pollutant removal. Mechanistically, the crystalline Fe-based nanoparticles were transformed into amorphous forms in the plant rhizosphere, resulting in greater availability and enhanced iron nutrition. This nutritional shift induced root metabolic reprogramming of amino acid and carbohydrate cycling, and related functional bacterial enrichment of Ramlibacter, Dyella, Bacillus, and Paraburkholderia in rhizosphere. A significant positive correlation between amorphous iron and root metabolites-associated microbes with PCB28 removal was evident, implying that iron supplementation selected for rhizospheric microorganisms favored PCBs degradation. Overall, this rhizoremediation promotion strategy of Fe species-metabolites-microbes highlights the potential for the hybrid application of nano-enabled phytotechnology in the remediation of soils contaminated with persistent organic xenobiotics.

Nanoscale zero-valent iron alters physiological, biochemical, and transcriptomic response of nonylphenol-exposed algae (Dictyosphaerium sp.)

Nanoparticles and organic pollutants are two major contaminants found in aquatic environments. Algae are regarded as the model organism for the risk assessment of pollutants in water. In our previous study, we investigated the toxic effects of nonylphenol (NP), a typical organic water pollutant, on algae; however, it remains unclear how algae respond to the coexistence of NP and nanoparticles. In this study, a concentration gradient of nanoscale zero-valent iron (nZVI; 10, 50, 100, and 200 mg/L) was added to NP-exposed Dictyosphaerium sp. to investigate both the toxic effects of this combination and the potential for NP removal. nZVI had a dose-dependent effect on NP-exposed algae, with high nZVI concentrations significantly decreasing algal biomass and pigment content, as well as severely damaging algal cellular ultrastructure. In addition, genes involved in antioxidant response, photosynthesis, and ribosome synthesis were significantly altered when NP-exposed algae were incubated with nZVI. In contrast to high nZVI concentrations, adding a small concentration of nZVI led to reduced toxicity in NP-exposed algae, while significantly enhancing the NP removal rate. This study improves our understanding of algal responses to various pollutants and suggests that nZVI may assist in the remediation of NP in aquatic ecosystems.

Effect of long-term low concentrations of TiO2 nanoparticles on dewaterability of activated sludge and the relevant mechanism: the role of nanoparticle aging

Nanoparticles can undergo aging phenomena in sewage treatment systems, which alter their physical and chemical properties. However, the effect of aged nanoparticles on the dewatering performance of activated sludge under long-term low concentrations is yet to be reported in sewage treatment systems. Here, we compared the chronic effects of pristine and aged TiO₂ nanoparticles on the sludge dewatering index, which includes specific resistance to filtration (SRF) and bound water (BW) in a sequencing batch reactor (SBR) at μg/L concentration levels, and analyzed the relevant mechanisms. The results indicated that aging in the sludge supernatant altered the photosensitivity and water stability of nanoparticles, which was mainly due to the changes in the zeta potential and energy band of the particle and was ultimately attributed to the combined effect of particle surface inclusions such as organic matter and inorganic salt. At 10 μg/L, nanoparticles reduced the sludge dewaterability, which observed an improvement at 100 μg/L. This is because 10 μg/L promoted the secretion of extracellular polymeric substances (EPS), which regulated the structure of sludge flora and increased the abundance of secreted quorum sensing-acyl-homoserine lactones (QS-AHL) and EPS genera, while the corresponding exposure results for 100 μg/L were the opposite, owing to the damage and necrosis effects caused by exposure under long-term light, which reduced EPS production and increased sludge density. Interestingly, aging could alleviate the effects of two exposure concentrations on sludge dewatering, mainly because of the decrease in the photoactivity of the nanoparticles. The results of this study show that environmental aging could delay, but not reverse the results of exposure to specific concentrations of nanoparticles. However, the significantly different ecological effects of photosensitive nanoparticles with two environmentally relevant concentration should be refined and confirmed again in freshwater environments to provide a basis for subsequent scientific management and control of photosensitive nanoparticles.

Microalgal Activity and Nutrient Uptake from Wastewater Enhanced by Nanoscale Zerovalent Iron: Performance and Molecular Mechanism

Microalgae-based bioremediation presents an alternative to traditional biological wastewater treatment. However, its efficiency is still challenging due to low microalgal activities and growth rate in wastewater. Iron plays an important role in microbial metabolism and is effective to stimulate microbial growth. In this study, a novel approach was proposed to simultaneously promote microalgal activity and nutrient uptake from wastewater using nanoscale zerovalent iron (nZVI), and the underlying molecular mechanism was explored. Compared to the control, 0.05 mg/L of nZVI significantly enhanced biomass production by 113.3% as well as NH₄⁺-N and PO₄^3--P uptake rates by 32.2% and 75.0%, respectively. These observations were attributed to the enhanced metabolic pathways and intracellular regulations. Specifically, nZVI alleviated the cellular oxidative stress via decreased peroxisome biogenesis as indicated by reduced reactive oxygen species, enzymes, and genes involved. nZVI promoted ammonium assimilation, phosphate metabolism, carbon fixation, and energy generation. Moreover, nZVI regulated the biosynthesis and conversions of intracellular biocomposition, leading to increased carotenoid, carbohydrate, and lipid productions and decreased protein and fatty acid yields. The above metabolisms were supported by the regulations of differentially expressed genes involved. This study provided an nZVI-based approach and molecular mechanism for enhancing microalgal activities and nutrient uptake from wastewater.

Exposure of cherry radish (Raphanus sativus L. var. Radculus Pers) to iron-based nanoparticles enhances its nutritional quality by trigging the essential elements

Iron (Fe) deficiency is a pervasive nutritional disorder, and producing vegetables enriched with Fe as a dietary source is imperative. Herein, Fe₃O₄, FeO(OH), α-Fe₂O₃, β-Fe₂O₃, γ-Fe₃O₄, and nZVI nanoparticles (NPs) were applied in soil as fertilizer to enhance the Fe nutrition in cherry radish. The highest enhancement of Fe content (58%) was observed in Fe₃O₄ treatment at 100 mg kg^-1, followed by FeO(OH) (49%), α-Fe₂O₃ (24%), nZVI (14%), β-Fe₂O₃ (13%) and γ-Fe₃O₄ (4%). The daily intake of Fe was 97-104% and 77-91% with Fe₃O₄ and FeO(OH) at 100-200 mg kg^-1, respectively. Moreover, the zinc, vitamin C and crude protein contents were also increased by 37, 48 and 67% under Fe₃O₄ treatment as compared to control. Fe₃O₄ at 100 mg kg^-1 also increased the essential amino acids (phenylalanine, leucine and isoleucine) contents by 11-14%. These data suggest that Fe₃O₄ and FeO(OH) NPs could be effective nanofertilizers to enhance Fe nutrition in plants.

Zero-Valent Iron Nanoparticles Induce Reactive Oxygen Species in the Cyanobacterium, Fremyella diplosiphon

Nanoscale zero-valent iron nanoparticles (nZVIs) are known to boost biomass production and lipid yield in Fremyella diplosiphon, a model biodiesel-producing cyanobacterium. However, the impact of nZVI-induced reactive oxygen species (ROS) in F. diplosiphon has not been evaluated. In the present study, ROS in F. diplosiphon strains (B481-WT and B481-SD) generated in response to nZVI-induced oxidative stress were quantified and the enzymatic response determined. Lipid peroxidation as a measure of oxidative stress revealed significantly higher malondialdehyde content (p < 0.01) in both strains treated with 3.2, 12.8, and 51.2 mg L^-1 nZVIs compared to untreated control. In addition, ROS in all nZVI-treated cultures treated with 1.6-25.6 mg L^-1 nZVIs was significantly higher than the untreated control as determined by the 2',7'-dichlorodihydrofluorescein diacetate fluorometric probe. Immunodetection using densitometric analysis of iron superoxide dismutase (SOD) revealed significantly higher SOD levels in both strains treated with nZVIs at 51.2 mg L^-1. In addition, we observed significantly higher (p < 0.001) SOD levels in the B481-SD strain treated with 6.4 mg L^-1 nZVIs compared to 3.2 mg L^-1 nZVIs. Validation using transmission electron microscopy equipped with energy-dispersive X-ray spectroscopy (EDS) revealed adsorption of nZVIs with a strong iron peak in both B481-WT and B481-SD strains. While the EDS spectra showed strong signals for iron at 4 and 12 days after treatment, a significant decrease in peak intensity was observed at 20 days. Future efforts will be aimed at studying transduction mechanisms that cause metabolic and epigenetic alterations in response to nZVIs in F. diplosiphon.

Combined toxicity of nano-TiO2 and Cd2+ to Scenedesmus obliquus: Effects at different concentration ratios

The continuous release of manufactured nanomaterials (MNMs) to environments raised concerns on their combined toxicological risks with co-existing contaminants, since MNMs might severely alter the environmental behavior and fate of the contaminants. In this study, the combined toxicity of nano-sized titanium dioxide (nTiO₂) and cadmium (Cd²⁺) to the green alga Scenedesmus obliquus and the underlying physicochemical mechanisms were investigated for the first time at different concentration ratios of Cd²⁺ to nTiO₂ to closely mimic the realistic environment scenarios where the concentration ratios of nTiO₂ to other contaminants are constantly changing. Our results suggested that under the co-exposure to different concentration ratios of Cd²⁺ to nTiO₂, the co-exposure contaminants exhibited three different combined toxicity modes (antagonistic, partially additive, and synergistic). Specifically, antagonistic combined toxicity was observed under co-exposure to a low concentration ratio of nTiO₂ to Cd²⁺ as the absorption by nTiO₂ decreased the bioavailability of Cd²⁺. However, the partially additive and synergistic combined toxicity occurred when the proportion of nTiO₂ in the co-exposure system was relatively high, which would mechanically and/or oxidatively damage the alga cell structures. Even worse, as a carrier of Cd²⁺, nTiO₂ enhanced the amount of Cd²⁺ entering cells, which significantly enhanced the toxicity of Cd²⁺ to algae. Overall, we demonstrated that concentration ratios of nTiO₂ to Cd²⁺ play an important role in determining the combined toxicity mode, which would provide a novel reference to environmental and health risk assessment of co-exposure to conventional pollutants and MNMs.

Oxidation process of lead sulfide nanoparticle in the atmosphere or natural water and influence on toxicity toward Chlorella vulgaris

Lead sulfide nanoparticle (nano-PbS) released into environment can cause hazards to human or ecosystem. Nano-PbS potentially undergoes oxidation in the environment, but oxidation mechanism is not understood yet. Herein, oxidation kinetics and products of nano-PbS by ozone (O₃), hydrogen peroxide (H₂O₂) and hydroxyl radical (HO·) in the atmosphere or natural water were investigated. Results show that oxidation process of nano-PbS can be divided into three stages, producing sulfate, ions and oxides of lead in sequence. O₃ or HO·leads to faster release of ionic lead from nano-PbS in the initial stage than H₂O₂, but causes significant decrease of ionic lead by transforming divalent lead to tetravalent lead oxides in the second or third stage. Toxicity determined taking Chlorella Vulgaris as an example follows an order of PbO₂ < Pb₃O₄ < nano-PbS < PbO < PbSO₄. Toxicity of lead particles is mainly determined by sizes influencing cellular uptake and solubility product constant (K_sp) related with dissolution of lead in cells. The results indicate that the toxicity of nano-PbS increases in an initial oxidation stage and decreases in further oxidation stages. This study provides new insights into environmental behavior of nano-PbS and mechanism understandings for assessing ecological risks of nano-PbS.

Effects of green synthesized and commercial nZVI on crystal violet degradation by Burkholderia vietnamiensis C09V: Dose-dependent toxicity and biocompatibility

The increasingly common remedial application of nanoscale zero-valent iron (nZVI) to alleviate specific contaminant issues may inadvertently lead to nZVI accumulation in wastewater. This is a potential concern, because the effect of nZVI on the common microbes essential for wastewater biotreatment is not known. This is further complicated when there are many ways available to synthesize nZVI, which may interreact with bacteria differently. Thus, in this study, the different effects of nZVI synthesized by Eucalyptus leaves (EL-nZVI) and a commercially synthesized nZVI on the biodegradation of crystal violet by Burkholderia vietnamiensis C09V (B.V. C09V) was studied. At high dose (1000 mg/L), EL-nZVI and commercial nZVI both significantly inhibited the removal of crystal violet by B.V. C09V, decreasing removal rates by 10.5 and 13.1% respectively. Optical density (OD₆₀₀) and soluble protein assays indicated that the growth of B.V. C09V improved under low doses (100 mg/L), but remained inhibited under high doses (500 and 1000 mg/L) of both commercial and EL-nZVI. Enzymes were also sensitive to nZVI, where the commercial variant exerted a greater effect on both the activity of lactate dehydrogenase (LDH) and superoxide dismutase (SOD) than EL-nZVI, indicating that EL-nZVI was less toxic than commercial nZVI. LIVE/DEAD staining also showed that the number of apoptotic cells was significantly higher when exposed to commercial nZVI rather than EL-nZVI. Furthermore, scanning electron microscopy (SEM) confirmed that direct contact between nZVI and cells at 1000 mg/L nZVI caused cell membrane disruption. Whereas, at 100 mg/L EL-nZVI, B.V. C09V grew better due to the formation of dense biofilms around the suspended EL-nZVI at a. Fourier transform infrared spectra (FTIR), confirmed an abundance of oxygen-containing functional groups on the surface of EL-nZVI which provided better biocompatibility than commercial nZVI. Overall, while dose was the most significant factor influencing nZVI toxicity, surface composition and morphology was also important. These new findings suggest chemical synthesis of metal nanoparticles should be replaced by biosynthetic routes to maintain viable microbial pollution during wastewater treatment.

Combined effect of nanoscale zero-valent iron and linear alkylbenzene sulfonate (LAS) to the freshwater algae Scenedesmus obliquus

With wide use of nanoparticles, co-exposure of aquatic organisms to nanoparticles and organic pollutants often takes place in the environment. However, the combined effects are still rarely understood. In this study, in order to study the interaction and biological effects of nanoscale zero-valent iron (nZVI) and linear alkylbenzene sulfonate (LAS), which acts as a typical surfactant, the freshwater algae Scenedesmus obliquus was exposed to nZVI and LAS individually and in combination for 96 h. According to the inhibition rate of the algae, the toxic effects were investigated by dose-response analysis. Then the combined effect of nZVI and LAS was evaluated using three evaluation models including toxicity unit (TU), additional index (AI), and mixture toxicity index (MTI). The results showed that the 96 h IC₅₀ of nZVI and LAS to Scenedesmus obliquus was 2.464 mmol L^-1 and 0.332 mmol L^-1, respectively. When nZVI coexisted with LAS at toxic ratio 1:1, the 96 h IC₅₀ value was 1.658 mmol L^-1 (shown with nZVI), and the partly additive effect of nZVI mixed with LAS was confirmed. However, when the toxic ratio of nZVI:LAS was 4:1, it showed synergistic effect. In addition, when nZVI mixed with LAS at toxic ratio 1:4, the joint effect is antagonistic effect. In addition, the content of chorophyll in Scenedesmus obliquus, especially the content of chlorophyll a, was decreased with the increase of mixture dose. However, the protein levels did not show significant changes at different mixture doses.

Toxicity of Nanoparticles in Biomedical Application: Nanotoxicology

Nanoparticles are of great importance in development and research because of their application in industries and biomedicine. The development of nanoparticles requires proper knowledge of their fabrication, interaction, release, distribution, target, compatibility, and functions. This review presents a comprehensive update on nanoparticles' toxic effects, the factors underlying their toxicity, and the mechanisms by which toxicity is induced. Recent studies have found that nanoparticles may cause serious health effects when exposed to the body through ingestion, inhalation, and skin contact without caution. The extent to which toxicity is induced depends on some properties, including the nature and size of the nanoparticle, the surface area, shape, aspect ratio, surface coating, crystallinity, dissolution, and agglomeration. In all, the general mechanisms by which it causes toxicity lie on its capability to initiate the formation of reactive species, cytotoxicity, genotoxicity, and neurotoxicity, among others.

Separation and Analysis of Nanoscale Zero-Valent Iron from Soil

Nanoscale zero-valent iron (nZVI) has become one of the most used engineered nanoparticles for soil remediation. However, isolating nZVI particles from a complex soil matrix for their accurate particle characterizations and transport distance measurements is still challenging. Here, this study established a new analysis approach combining ultrasound-assisted solvent extraction, magnetic separation, and single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) analysis to isolate nZVI particles from soils and quantify their concentration and size. The interference from natural Fe-containing substances on nZVI analysis could be efficiently minimized by magnetic separation and dilution. After the optimization of extraction solvent type/concentration (i.e., 2.5 mM tetrasodium pyrophosphate) and ultrasonication time (i.e., 30 min), acceptable recoveries in both particle number (62.0 ± 10.8%-96.1 ± 4.8%) and Fe mass (70.6 ± 12.0%-119 ± 18%) could be achieved for different sizes (50 and 100 nm) and concentrations (50, 100, and 500 μg g^-1) of spiked nZVI from six soils. The detection limits of particle size and concentration were approximately 43.1 nm and 50 μg nZVI per gram soil, respectively. These results provide a feasible approach to quantify the nZVI concentration and size in complex soil matrices, which will allow the improvements to characterize and track the nZVI particles in the field, promote the use of nZVI particles for soil remediation, and better assess their environmental implications.

Are biosynthesized nanomaterials toxic for the environment? Effects of perlite and CuO/perlite nanoparticles on unicellular algae Haematococcus pluvialis

The properties of nanomaterials such as perlite nanoparticles and their increased application have raised concerns about their probable toxic impacts on the aquatic ecosystems and algae. Here, a novel biochemical synthesis and immobilization of CuO is reported on perlite nanoparticles (CuO/Per-NPs) and its toxic effect on alga has been compared with nanoperlites. This biosynthesis of CuO/Per-NPs performed using phytochemicals of Haematococcus pluvialis, Sargassum angustifolium, and walnut leaves in the aqueous extract. The structural, morphological, and colloidal properties of the as-synthesized nanoparticles have been confirmed by various methods. According to the obtained results, the morphology of the synthesized CuO/Per-NPs was spherical with sizes ranging from about 13 to 24 nm. Besides, the effects of Per-NPs and CuO/Per-NPs on unicellular algae H. pluvialis were studied. The changes in the amount of chlorophyll a, chlorophyll b, and Carotenoids in the presence of different concentrations of Per-NPs (25, 50, 100 mg/L) were more than CuO/Per-NPs. Also, decreased growth rate and efficiency of photosystem II confirmed the toxic effects of Per-NPs. However, the toxicity of CuO/Per-NPs appears to be lower than that of Per-NPs, which can be due to the changes in the surface and cationic charge of modified nanoperlit. These changes lead to a decrease in the interaction of nanoparticles with H. pluvilalis and a reduction in ROS production. Finally, the results of GC-MS used to evaluate volatile compounds, indicated an increase in the number of phenolic compounds in comparison to the control samples in 25, 50, and 100 mg/L treatments of nano-perlite.

Transformation and implication of nanoparticulate zero valent iron in soils

Knowledge of nanoparticulate zero-valent iron (nZVI) transformation in soils and its relationship with the potential impacts on soil properties are crucial to evaluate the environmental implication and application of nZVI. This study investigated nZVI transformation and the effects on soil properties in eight soils with various ageing time and soil moisture content (SMC). Spherical nZVI was gradually oxidized, collapsed, and adhered to clay minerals, and crystalline maghemite and magnetite were the primary oxidation products. Compared with the flooded condition, nZVI oxidation was accelerated under 70% SMC but was limited under 30% SMC. Acidic soil with lower content of dissolved aromatic carbon was advantage to nZVI oxidation under the flooded condition, while carboxymethylcellulose coating and iron oxides on nZVI surface limited nZVI oxidation. The aged nZVI existed mainly in the form of association with soil mineral or organic matter rather than in ion-exchangeable or carbonate form. nZVI treatment promoted soil aromatic carbon sequestration and decreased soil redox potential, and the impacts of nZVI on soil pH, electrical conductivity, ζ-potential, dissolved organic carbon, and catalase and urease activities were dependent on soil type and SMC. The findings are of significance for the evaluation of the environmental risk and proper application of nZVI.

Metabolomics reveals the inhibition on phosphorus assimilation in Chlorella vulgaris F1068 exposed to AgNPs

Phosphorus removal by algae-based biotechnology can be achieved through algal assimilation, surface adsorption, or abiotic precipitation. However, there are still unavailable how these phosphorus removal processes were affected by nanoparticles in wastewater. Here, we employed a non-targeted metabolomic approach to reveal the impact of silver nanoparticles (AgNPs) on the phosphorus assimilation by a unicellular green alga Chlorella vulgaris F1068 (C. vulgaris F1068). Results showed that AgNPs mostly inhibited total phosphorus (TP) removal by the algal assimilation, with TP removal efficiency being reduced by 66.2% (with 0.20 mg/L AgNPs) of the control (without AgNPs). Metabolomics analysis also indicated that AgNPs disturbed metabolic responses related to phosphorus assimilation. AgNPs inhibited phospholipid metabolism which included inositol phosphate metabolism and phosphatidylinositol signaling system (downregulation of glycerol-3-phosphate and myo-inositol, as well as upregulation of serine). Metabolites related to phosphorus assimilation products were impacted through downregulation of guanine, glutamine, alanine, and aspartic acid, as well as upregulation of succinic acid, thereby impeding the algal assimilation of phosphorus. Moreover, perturbation of glutathione metabolism induced by oxidative stress stimulated the alteration of membrane state (upregulation of glycine). These findings contribute to a molecular-scale perspective of nanoparticles on algae-based biotechnology in phosphorus removal.

Combined toxic effects of dioxin-like PCB77 with Fe-based nanoparticles in earthworm Eisenia fetida

Iron-based nanomaterials hold promise for in situ remediation of persistent halogenated contaminants such as dioxin-like polychlorinated biphenyls, however, their complex interactions and joint toxicity toward beneficial soil biological functions remain unknown. This study examined the effects of nano-zero valent iron (nZVI) on the physiological and morphological changes, on the bioaccumulation of co-existed dioxin-like 3,3',4,4'-tetrachloro-biphenyls (PCB77), and the joint toxicity of nZVI and PCB77 in earthworms Eisenia fetida. An orthogonally designed experiment was conducted through the exposure of E. fetida to the combined and separate nZVI and PCB77 at various concentrations in soil for 28 days (nZVI at the levels of g-Fe/kg-soil and PCB77 at the levels of mg-PCB/kg-soil). Results indicated that both nZVI and PCB77 inhibited the growth and reproduction of earthworms, and the combined exposure resulted in a synergistic effect. The addition of 10 g/kg nZVI decreased the contents of PCB77 and significantly increased the accumulation of PCB77 to a level ranging 14-97 mg/kg in earthworms in a nZVI dose dependent manner. The observed synergism might relate to the aggravated damage of earthworm epidermis in the presence of nZVI. PCB77 and nZVI at their corresponding high levels (10 mg/kg and 10 g/kg) induced oxidative stress and lipid peroxidation in the earthworms through the increased levels of reactive oxygen species and the subsequent inhibition of antioxidant enzymes including superoxide dismutase and catalase. Further metabolomics analyses revealed that the normal glutamic acid metabolism and tricarboxylic acid cycle were disturbed in earthworms exposed to the combined treatment of 10 mg/kg PCB77 and 10 g/kg nZVI. Our findings suggested that earthworms as a sentinel species could be readily employed in toxicity and tolerance studies to succeed the safe applications of nZVI and interestingly earthworms themselves also hold promise for vermiremediation owing to the high bioaccumulation potential of PCBs from contaminated soils.

In situ prepared algae-supported iron sulfide to remove hexavalent chromium

The effects of algae on the removal of contaminant by iron sulfide (FeS) are still unknown. Chlorella vulgaris (CV), a remarkable algal specie, was used to prepare the CV-supported FeS (CV-FeS) and to investigate the role that CV plays in the removal of a heavy metal (i.e., hexavalent chromium (Cr(VI)) by FeS. The stabilized effect from algal extracellular polymeric substance (EPS) enhanced the reactivity of FeS due to the decrease of FeS aggregation, thus increasing Cr(VI) removal rate from 0.21 min^-1 to 0.79 min^-1. Furthermore, the strong buffering induced by the algal functional groups could effectively prevent the solution pH from increasing, which improved Cr(VI) removal because acidic solution facilitated Cr(VI) reduction by FeS. However, the complexing capacity from algal EPS made Fe(II) unavailable for Cr(VI) reduction, which led to 35% decrease of Cr(VI) removal. The Fe(II) was oxidized to α-FeOOH by Cr(VI) in the absence of CV, while the unreacted Fe(II) was detected as in the form of Fe(OH)₂ in CV-FeS. Cr(VI) was reduced to Cr(III) and S(-II) was oxidized to elemental sulfur (S₈) regardless of the CV. This work showed the different roles of algae in the removal of Cr(VI) by FeS and provided value information for the application of FeS in the polluted algae-containing water system.