Enhanced biodegradation of hydrophobic organic pollutants by the bacterial consortium: Impact of enzymes and biosurfactants

Mechanism of A. oleivorans S4 treating soluble phosphorus deficiency and hydrocarbon contamination simultaneously

Both soluble phosphorus (P) deficiency and petroleum hydrocarbon contamination represent challenges in soil environments. While phosphate-solubilizing bacteria and hydrocarbon-degrading bacteria have been identified and employed in environmental bioremediation, the bacteria co-adapted to soluble P deficiency and hydrocarbon contamination has rarely been reported. This study explored the ability of Acinetobacter oleivorans S4 (A. oleivorans S4) to solubilize phosphate using n-hexadecane (H), glucose (G), and a mixed carbon source (HG) in tricalcium phosphate (TCP) medium. A. oleivorans S4 exhibited robust growth in H-TCP, releasing 31 mg L-1 of soluble P. Conversely, A. oleivorans S4 barely grew in G-TCP, releasing 654 mg L-1 of soluble P. In HG-TCP, biomass surpassed that in H-TCP, with phosphate release comparable to that in G-TCP. HPLC analysis revealed a small amount of TCA cycle acids in H-TCP and a large amount of gluconate in G-TCP and HG-TCP. Transcriptomic analysis showed elevated expression of genes associated with alkane degradation, P starvation, N utilization, and trehalose synthesis in H-TCP, revealing the molecular co-adaptation mechanism of A. oleivorans S4. Furthermore, the addition of glucose enhanced alkane degradation, P and N utilization, and reduced trehalose synthesis. It indicated that incomplete glucose metabolism may provide energy for other reactions, and the increase in soluble P mediated by gluconate may alleviate oxidative stress. Overall, A. oleivorans S4 proves promising for remediating soluble P-deficient and hydrocarbon-contaminated environments, and glucose stimulates its transformation into a super phosphate-solubilizing bacterium.

Simultaneous biodegradation of polycyclic aromatic hydrocarbons and phthalates by bacterial consortium and its bioremediation for complex polluted soil and sewage sludge

Simultaneous biodegradation of multiple micropollutantslike polycyclic aromatic hydrocarbons (PAHs) and phthalates (PAEs) by microbial consortia remain unclear. Here, four distinct bacterial consortia capable of degrading PAHs and PAEs were domesticated from sludge and its composts. PAH-degrading consortium HS and PAE-degrading consortium EC2 displayed the highest degradation efficiencies for PAHs (37 %-99 %) and PAEs (98 %-99 %), respectively, being significantly higher than those of individual member strains. Consortia HS and EC2 could simultaneously degrade both PAHs and PAEs. Remarkably, a synthetic consortium Syn by co-culturing consortia HS and EC2 demonstrated proficient simultaneous biodegradation for both PAHs (65 %-98 %) and PAEs (91 %-97 %). These consortia changed their community structure with enriching pollutant-degrading genera and extracellular polymeric substance contents to promote simultaneous biodegradation of multiple pollutants. Moreover, consortium Syn significantly enhanced degradation of both PAHs and PAEs in soil and sludge. This study provides strong candidates for simultaneous bioremediation of complex polluted environments by PAHs and PAEs.

Enhanced biodegradation of 2, 4-dichlorophenol in packed bed biofilm reactor by impregnation of polyurethane foam with Fe3O4 nanoparticles: Bio-kinetics, process optimization, performance evaluation and toxicity assessment

In this work, an effort has been made to enhance the efficacy of biological process for the effective degradation of 2, 4-dichlorophenol (2, 4-DCP) from wastewater. The polyurethane foam was modified with Fe3O4 nanoparticles and combined with polyvinyl alcohol, sodium alginate, and bacterial consortium for biodegradation of 2, 4-DCP in a packed bed biofilm reactor. The maximum removal efficiency of 2, 4-DCP chemical oxygen demand, and total organic carbon were found to be 92.51 ± 0.83 %, 86.85 ± 1.32, and 91.78 ± 1.24 %, respectively, in 4 days and 100 mg L-1 of 2, 4-DCP concentration at an influent loading rate of 2 mg L-1h-1 and hydraulic retention time of 50 h. Packed bed biofilm reactor was effective for up to four cycles to remove 2, 4-DCP. Growth inhibition kinetics were evaluated using the Edward model, yielding maximum growth rate of 0.45 day-1, inhibition constant of 110.6 mg L-1, and saturation constant of 62.3 mg L-1.

Copper nanoclusters-doped novel carrier with synergistic adsorption-catalytic active sites to enable high-performance dye removal

Enhancing the synergistic interplay between adsorption and catalytic oxidation to amplify Fenton-like effects remains a pivotal challenge in advancing water pollution remediation strategies. In this study, a suite of novel carriers (SH) composed of silica (SiO2) and hydroxyapatite (HAp) in different ratios were synthesized through an amalgamation of the sol-gel and co-precipitation techniques. Notably, various forms of copper (Cu) species, including Cu2+ ions and Cu nanoclusters (Cu NCs), could be stably incorporated onto the SH surface via meticulous loading and doping techniques. This approach has engendered a new class of Fenton-like catalysts (Cu NCs-SH1-5) characterized by robust acid-base tolerance stability and remarkable recyclability. Compared with the previously reported Cu NCs-HAp, this catalyst with lower Cu species content could achieve better performance in adsorbing and degrading dyes under the aid of hydrogen peroxide (H2O2). The catalyst's dual action sites, specifically the adsorption sites (SiOH, POH, slit pores) and catalytic centers (multivalent Cu species), had clear division of labor and collaborate with each other. Further, reactive oxygen species (ROS) identification and astute electrochemical testing have unveiled the mechanism underpinning the cooperative degradation of dyes by three types of ROS, spawned through electron transfer between the Fenton-like catalyst (Cu NCs-SH) and H2O2. From these insights, the mechanism of synergistic adsorption-catalytic removal was proposed.

Isolation and screening of antimicrobial biosurfactants obtained from mangrove plant root-associated bacteria

The unique properties of biosurfactants obtained from microbes, including their activity at extreme temperatures, make them more attractive than synthetic alternatives. Henceforth, the principle objective is to isolate and detect the antibacterial and antifungal activities of the biosurfactants produced from bacteria of the economically competitive mangrove ecosystem. Using the serial dilution method, 53 bacterial strains were recovered from the Manakudy mangrove forest in Kanyakumari, India, for the investigation. Different biosurfactant screening methods and morphological and biochemical tests were opted to select the potential biosurfactant producer. After the initial screening, two strains were discovered by 16S rRNA gene sequencing followed by extraction using chloroform: methanol (2:1) by the precipitation method. The partially purified biosurfactants were then screened for antimicrobial properties against pathogens including Mucor sp., Trichoderma sp. Morphological, biochemical, and 16S rRNA gene sequencing identified the two strains to be gram-positive, rod-shaped bacteria namely Virgibacillus halodentrificans CMST-ZI (GenBank Accession No.: OL336402.1) and Pseudomonas pseudoalcaligenes CMST-ZI (GenBank Accession No (10 K): OL308085.1). The two extracted biosurfactants viz., 1,2-benzenedicarboxylic acid, mono (2-ethylhexyl) ester, as well as cycloheptane efficiently inhibited human pathogens, including Enterococcus faecalis, and fungi, including Mucor sp., Trichoderma sp., indicated by the formation of a zone of inhibition in pharmacological screening. Thus, there is a growing interest in the prospective application of these biosurfactants isolated from marine microbes, exhibiting antimicrobial properties which can be further studied as a potential candidate in biomedical studies and eco-friendly novel drug development.

Integrated approach of nano assisted biodegradation of anthracene by Pseudomonas aeruginosa and iron oxide nanoparticles

Poly aromatic hydrocarbons (PAHs) are considered as hazardous compounds which causes serious threat to the environment dua to their more carcinogenic and mutagenic impacts. In this study, Pseudomonas aeruginosa PP4 strain and synthesized iron nanoparticles were used to evaluate the biodegradation efficiency (BE %) of residual anthracene. The BE (%) of mixed degradation system (Anthracene + PP4+ FeNPs) was obtained about 67 %. The FTIR spectra result revealed the presence of functional groups (C-H, -CH3, CC, =C-H) in the residual anthracene. The FESEM and TEM techniques were used to determine the surface analysis of the synthesized FeNPs and the average size was observed by TEM around 5-50 nm. The crystalline nature of the synthesized iron nanoparticles was confirmed by the observed different respective peaks of XRD pattern. The various functional constituents (OH, C-H, amide I, CH3) were identified in the synthesized iron nanoparticles by FTIR spectrum. In conclusion, this integrated nano-bioremediation approach could be an promising and effective way for many environmental fields like cleanup of hydrocarbon rich environment.

Co-production of lipases and biosurfactants by Bacillus methylotrophicus in solid-state fermentation

The production of biosurfactants and lipases through solid-state fermentation (SSF) processes remains relatively unexplored, especially in bacterial applications. The use of solid matrices, eliminating the need for precipitation and recovery processes, holds significant potential for facilitating bioremediation. This study aimed to simultaneously produce biocompounds via SSF using Bacillus methylotrophicus and employ the fermented substrate for remediating soil contaminated with 20% biodiesel. Initial efforts focused on determining optimal conditions for concurrent lipase and biosurfactant production during an 8-day fermentation period. The selected conditions, including a substrate mix of wheat bran and corn cob (80/20), 75% moisture, 1% glycerol inducer, 2% nitrogen, and 1% sugarcane molasses, resulted in a 24.61% reduction in surface tension and lipase activity of 3.54 ± 1.20 U. Subsequently, a 90-day bioremediation of clayey soil contaminated with biodiesel showcased notable biodegradation, reaching 72.08 ± 0.36% within the initial 60 days. The incorporation of biocompounds, biostimulation, and bioaugmentation (Test E2) contributed to this efficacy. The use of the fermented substrate as a biostimulant and bioaugmentation agent facilitated in situ biocompound production in the soil, leading to a 23.97% reduction in surface tension and lipase production of 1.52 ± 0.19 U.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03910-7.

Selective stepwise adsorption for enhanced removal of multi-component dissolved organic chemicals from petrochemical wastewater

The coexistence of multi-component dissolved organic chemicals causes tremendous challenge in purifying petrochemical wastewater, and stepwise selective adsorption holds the most promise for enhanced treatments. This study is designed to enhance the removal of multiple dissolved organic chemicals by stepwise adsorption. Special attention is given to the selective removal mechanisms for the major pollutant N,N-dimethylformamide (DMF), the sensitive pollutant fluorescent dissolved organic matter (FDOM) and other components. The results indicated that the combination of coal activated carbon and aluminum silica gel produced a synergistic effect and broke the limitation of removing only certain pollutants. Combined removal rates of 80.5 % for the dissolved organic carbon and 86.7 % for the biotoxicity in petrochemical wastewater were obtained with the enhanced two-step adsorption. The adsorption performance of both adsorbents remained stable even after five cycles. The selective adsorption mechanism revealed that hydrophobic organics such as DMF was adsorbed by the macropores of coal activated carbon, while the FDOM was eliminated by π-π stacking, electrostatic interaction and hydrophobic interaction. The hydrophilic organics were removed by the mesopores of aluminum silica gel, the silica hydroxyl groups and hydrophilic interaction. This study provides a comprehensive understanding of the selective adsorption mechanism and enhanced stepwise removal of multiple pollutants in petrochemical wastewater, which will guide the deep treatment of complex wastewater.

Bioremediation of hydrocarbon by co-culturing of biosurfactant-producing bacteria in microbial fuel cell with Fe2O3-modified anode

The most common type of environmental contamination is petroleum hydrocarbons. Sustainable and environmentally friendly treatment strategies must be explored in light of the increasing challenges of toxic and critical wastewater contamination. This paper deals with the bacteria-producing biosurfactant and their employment in the bioremediation of hydrocarbon-containing waste through a microbial fuel cell (MFC) with Pseudomonas aeruginosa (exoelectrogen) as co-culture for simultaneous power generation. Staphylococcus aureus is isolated from hydrocarbon-contaminated soil and is effective in hydrocarbon degradation by utilizing hydrocarbon (engine oil) as the only carbon source. The biosurfactant was purified using silica-gel column chromatography and characterised through FTIR and GCMS, which showed its glycolipid nature. The isolated strains are later employed in the MFCs for the degradation of the hydrocarbon and power production simultaneously which has shown a power density of 6.4 W/m3 with a 93% engine oil degradation rate. A biogenic Fe2O3 nanoparticle (NP) was synthesized using Bambusa arundinacea shoot extract for anode modification. It increased the power output by 37% and gave the power density of 10.2 W/m3. Thus, simultaneous hydrocarbon bioremediation from oil-contamination and energy recovery can be achieved effectively in MFC with modified anode.

A novel eco-friendly strategy for removing phenanthrene from groundwater: Synergism of nanobubbles and rhamnolipid

Nanobubbles (NBs), given their unique properties, could theoretically be paired with rhamnolipids (RL) to tackle polycyclic aromatic hydrocarbon contamination in groundwater. This approach may overcome the limitations of traditional surfactants, such as high toxicity and low efficiency. In this study, the remediation efficiency of RL, with or without NBs, was assessed through soil column experiments (soil contaminated with phenanthrene). Through the analysis of the two-site non-equilibrium diffusion model, there was a synergistic effect between NBs and RL. The introduction of NBs led to a reduction of up to 24.3 % in the total removal time of phenanthrene. The direct reason for this was that with NBs, the retardation factor of RL was reduced by 1.9 % to 15.4 %, which accelerated the solute replacement of RL. The reasons for this synergy were multifaceted. Detailed analysis reveals that NBs improve RL's colloidal stability, increase its absolute zeta potential, and reduce its soil adsorption capacity by 13.3 %-19.9 %. Furthermore, NBs and their interaction with RL substantially diminish the surface tension, contact angle, and dynamic viscosity of the leaching solution. These changes in surface thermodynamic and rheological properties significantly enhance the migration efficiency of the eluent. The research outcomes facilitate a thorough comprehension of NBs' attributes and their relevant applications, and propose an eco-friendly method to improve the efficiency of surfactant remediation.

Electrochemical oxidation of azo dyes degradation by RuO2-IrO2-TiO2 electrode with biodegradation Aeromonas hydrophila AR1 and its degradation pathway: An integrated approach

Azo dyes are the most varied class of synthetic chemicals with non-degradable characteristics. They are complex compounds made up of many different parts. It was primarily utilized for various application procedures in the dyeing industry. Therefore, it's crucial to develop an economical and environmentally friendly approach to treating azo dyes. Our present investigation is an integrated approach to the electrooxidation (EO) process of azo dyes using RuO2-IrO2-TiO2 (anode) and titanium mesh (cathode) electrodes, followed by the biodegradation process (BD) of the treated EO dyes. Chemical oxygen demand (COD) removal efficiency as follows MB (55%) ≥ MR (45%) ≥ TB (38%) ≥ CR (37%) correspondingly. The fragment generated during the degradation process which was identified with high-resolution mass spectrometry (HRMS) and its degradation mechanism pathway was proposed as demethylation reaction and N-N and C-N/C-S cleavage reaction occurs during EO. In biodegradation studies by Aeromonas hydrophila AR1, the EO treated dyes were completely mineralized aerobically which was evident by the COD removal efficiency as MB (98%) ≥ MR (92.9%) ≥ TB (88%) ≥ CR (87%) respectively. The EO process of dyes produced intermediate components with lower molecular weights, which was effectively utilized by the Aeromonas hydrophila AR1 and resulted in higher degradation efficiency 98%. We reported the significance of the enhanced approach of electrochemical oxidation with biodegradation studies in the effective removal of the pollutants in dye industrial effluent contaminated water environment.

Impact of biosurfactant produced by Bacillus spp. on biodegradation efficiency of crude oil and anthracene

Biosurfactants are surface active molecules generated by various microorganisms, including bacteria, actinobacteria, algae, and fungi. In this study, bacterial strains are isolated from soil contaminated with used motor oil and examined for potential biosurfactant production. A minimum salt medium (MSM), with crude oil as the only carbon source, is used to isolate potential biosurfactant-producing bacterial strains. About 23 strains are isolated, and all are subjected to the primary screening methods for biosurfactant production. Based on the emulsification index, oil displacement, and drop collapse screening methods, two isolates with potential biosurfactant-producing ability are selected for further studies. The synthesis of biosurfactants, crude oil and anthracene biodegradation is carried out with strains DTS1 and DTS2. Both strains show significant outcomes in crude oil degradation. In addition, both strains can utilize anthracene as the sole carbon source. During the degradation course, changes in the growth conditions are continuously monitored by measuring turbidity and pH. In this degradation study, the biosurfactant production aptitude of the isolated strains plays an essential role in increasing the bioavailability of hydrophobic hydrocarbons. These strains are identified down to the molecular level by employing 16S rRNA gene sequencing, and the acquired sequences are submitted to get the accession numbers. These prospective strains can be utilized to remediate hydrocarbon-contaminated environments.

Mitigation of hydrocarbon toxicity using bacterial consortium in microcosm environment for agrarian fecundity

Petroleum contamination in the soil has been well emphasized as a toxic and hazardous soil pollution contributing to a significant portion of soil infertility worldwide. In the present study, bacterial consortium CHM1 composed of 5 strains belonging to genera Klebsiella, Pantoea, and Enterobacter was evaluated for hydrocarbon degradation ability in the soil environment, as well as their performance in remediating ecotoxicity and phytotoxicity. Initially, the degradation efficiency (1.98%/day) in the soil environment was evaluated. Scanning Electron Microscopy combined with Energy Dispersive X-ray spectroscopy revealed an increase in nitrogen content by 24.98% and a decrease in carbon content by 22.76% implying an improvement in soil fertility. The Fourier Transform InfraRed spectroscopy and Gas Chromatographic analysis revealed significant depletion of aromatic, cyclic, long aliphatic, and complex acid and ester content of the test soil. Moreover, the quantitative PCR analysis exhibited the non-competitive coexistence of each component of the CHM1 consortium. Different enzymatic assays revealed elevated dehydrogenase and superoxide dismutase activity in the degradation system due to the introduction of CHM1 in the soil microcosm. Vibrio fischeri-assisted ecotoxicity analysis had established the potential of CHM1 to efficiently minimize the ecotoxicity of hydrocarbon contamination. The phytotoxicity analysis was performed using four different plant models viz. Chickpeas (Cicer arientinum), Coriander (Coriandrum sativum), Fenugreek (Trigonella foenum-graecum), and Spinach (Spinacia oleracea) exhibiting CHM1 amendment helped to restore plant germination and growth in hydrocarbon-contaminated soil system efficiently. The promising results from this study indicated the possible application of the bacterial consortium in hydrocarbon-contaminated land management and soil restoration for cultivation or other plantation purposes.

Identification of rare microbial colonizers of plastic materials incubated in a coral reef environment

Plastic waste accumulation in marine environments has complex, unintended impacts on ecology that cross levels of community organization. To measure succession in polyolefin-colonizing marine bacterial communities, an in situ time-series experiment was conducted in the oligotrophic coastal waters of the Bermuda Platform. Our goals were to identify polyolefin colonizing taxa and isolate bacterial cultures for future studies of the biochemistry of microbe-plastic interactions. HDPE, LDPE, PP, and glass coupons were incubated in surface seawater for 11 weeks and sampled at two-week intervals. 16S rDNA sequencing and ATR-FTIR/HIM were used to assess biofilm community structure and chemical changes in polymer surfaces. The dominant colonizing taxa were previously reported cosmopolitan colonizers of surfaces in marine environments, which were highly similar among the different plastic types. However, significant differences in rare community composition were observed between plastic types, potentially indicating specific interactions based on surface chemistry. Unexpectedly, a major transition in community composition occurred in all material treatments between days 42 and 56 (p < 0.01). Before the transition, Alteromonadaceae, Marinomonadaceae, Saccharospirillaceae, Vibrionaceae, Thalassospiraceae, and Flavobacteriaceae were the dominant colonizers. Following the transition, the relative abundance of these taxa declined, while Hyphomonadaceae, Rhodobacteraceae and Saprospiraceae increased. Over the course of the incubation, 8,641 colonizing taxa were observed, of which 25 were significantly enriched on specific polyolefins. Seven enriched taxa from families known to include hydrocarbon degraders (Hyphomonadaceae, Parvularculaceae and Rhodobacteraceae) and one n-alkane degrader (Ketobacter sp.). The ASVs that exhibited associations with specific polyolefins are targets of ongoing investigations aimed at retrieving plastic-degrading microbes in culture.

Toxicity assessment of microplastic (MPs); a threat to the ecosystem

Plastic is now considered part and parcel of daily life due to its extensive usage. Microplastic (MP) pollution is becoming a growing worry and has been ranked as the second most critical scientific problem in the realm of ecology and the environment. Microplastics are smaller in size than the plastic and are more harmful to biotic and as well as abiotic environments. The toxicity of microplastic depends upon its shape and size and increases with an increase in its adsorption capacity and their toxicity. The reason behind their harmful nature is their small size and their large surface area-to-volume ratio. Microplastic can get inside fruits, vegetables, seeds, roots, culms, and leaves. Hence microplastic enters into the food chain. There are different entry points for microplastic to enter into the food chain. Such sources can include polluted food, beverages, spices, plastic toys, and household (packing, cooking, etc.). The concentration of microplastic in terrestrial environments is increasing day by day. Microplastic causes the destruction of soil structure; destroys soil microbiota, cause depletion of nutrients in the soil, and their absorption by plants decreases plant growth. Apart from other environmental problems caused by microplastic, human health is also badly affected by microplastic pollution present in the terrestrial environment. The presence of microplastics in the human body has been confirmed. Microplastic enters into the body of humans in different possible ways. According to their way of entering the body, microplastics cause different diseases in humans. MPs also cause negative effects on the human endocrine system. At the ecosystem level, the impacts of microplastic are interconnected and can disrupt ecological processes. Although recently different papers have been published on several aspects of the microplastic present in the terrestrial environment but there is no complete overview that focus on the interrelationship of MPs in plants, and soil and their effect on higher animals like a human. This review provides a completely detailed overview of existing knowledge about sources, occurrences, transport, and effects of microplastic on the food chain and soil quality and their ecotoxicological effects on plants and humans.

A comprehensive study on diesel oil bioremediation under microcosm conditions using a combined microbiological, enzymatic, mass spectrometry, and metabarcoding approach

This study aims at the application of a marine fungal consortium (Aspergillus sclerotiorum CRM 348 and Cryptococcus laurentii CRM 707) for the bioremediation of diesel oil-contaminated soil under microcosm conditions. The impact of biostimulation (BS) and/or bioaugmentation (BA) treatments on diesel-oil biodegradation, soil quality, and the structure of the microbial community were studied. The use of the fungal consortium together with nutrients (BA/BS) resulted in a TPH (Total Petroleum Hydrocarbon) degradation 42% higher than that obtained by natural attenuation (NA) within 120 days. For the same period, a 72 to 92% removal of short-chain alkanes (C12 to C19) was obtained by BA/BS, while only 3 to 65% removal was achieved by NA. BA/BS also showed high degradation efficiency of long-chain alkanes (C20 to C24) at 120 days, reaching 90 and 92% of degradation of icosane and heneicosane, respectively. In contrast, an increase in the levels of cyclosiloxanes (characterized as bacterial bioemulsifiers and biosurfactants) was observed in the soil treated by the consortium. Conversely, the NA presented a maximum of 37% of degradation of these alkane fractions. The 5-ringed PAH benzo(a)pyrene, was removed significantly better with the BA/BS treatment than with the NA (48 vs. 38 % of biodegradation, respectively). Metabarcoding analysis revealed that BA/BS caused a decrease in the soil microbial diversity with a concomitant increase in the abundance of specific microbial groups, including hydrocarbon-degrading (bacteria and fungi) and also an enhancement in soil microbial activity. Our results highlight the great potential of this consortium for soil treatment after diesel spills, as well as the relevance of the massive sequencing, enzymatic, microbiological and GC-HRMS analyses for a better understanding of diesel bioremediation.

Development of luminescence carbon quantum dots for metal ions detection and photocatalytic degradation of organic dyes from aqueous media

In the present study, fish scale waste was used for the organic synthesis of luminescence CQDs by the hydrothermal method. The impact of CQDs on improved photocatalytic degradation of organic dyes and metal ions detection is examined in this study. The synthesized CQDs had a variety of characteristics that were detected, such as crystallinity, morphology, functional groups, and binding energies. The luminescence CQDs showed outstanding photocatalytic effectiveness for the destruction of methylene blue (96.5%) and reactive red 120 dye (97.8%), respectively after 120 min exposure to visible light (420 nm). The high electron transport properties of the CQDs edges, which make it possible to efficiently separate electron-hole pairs, are attributed to the enhanced photocatalytic activity of the CQDs. These degradation results prove that the CQDs are the outcome of a synergistic interaction between visible light (adsorption); a potential mechanism is also suggested, and the kinetics is analyzed to use a pseudo-first-order model. Additionally, the metal ions detection of CQDs was studied by various metal ions (Hg²⁺, Fe²⁺, Cu²⁺, Ni²⁺, and Cd²⁺) in an aqueous solution and results revealed that the PL intensity of CQDs in presence of cadmium ions decreased. Studies show that the organic fabrication of CQDs are effective photocatalyst and may one day serve as the ideal material to reduce water pollution.

Genomic and phenotypic features of Acinetobacter baumannii isolated from oil reservoirs reveal a novel subspecies specialized in degrading hazardous hydrocarbons

The genus Acinetobacter encompasses biotechnologically relevant species and nosocomial pathogens. In this study, nine isolates recovered from different oil reservoir samples showed the ability to grow with petroleum as the only carbon source and possessed the ability to emulsify kerosene. The whole genomes of the nine strains were sequenced and analyzed. The average nucleotide identity (ANI) and digital DNA-DNA hybridization (dDDH) values of all strains were compared to the reference strains, and the results were below the reference values (<97.88 and 82, respectively), suggesting that the isolates belong to a new subspecies of Acinetobacter baumannii. The name Acinetobacter baumannii oleum ficedula is proposed. A comparison of the whole genome repertoire of 290 Acinetobacter species indicated that the strains in this study resemble non-pathogenic Acinetobacter strains. However, the new isolates resemble A. baumannii when comparing virulence factors. The isolates in this study carry many genes involved in hydrocarbon degradation, indicating the potential to degrade most toxic compounds listed by environmental regulatory agencies such as ATSDR, EPA, and CONAMA. In addition, despite the absence of known biosurfactant or bioemulsifier genes, the strains showed emulsifying activity, suggesting the presence of new pathways or genes related to this process. This study investigated the genomic, phenotypic, and biochemical features of the novel environmental subspecies A. baumannii oleum ficedula, revealing their potential to degrade hydrocarbons and to produce biosurfactants or bioemulsifiers. Applying these environmental subspecies in bioaugmentation strategies sheds light on future approaches to bioremediation. The study shows the importance of genomic analysis of environmental strains and their inclusion in metabolic pathways databases, highlighting unique enzymes/alternative pathways for consuming hazardous hydrocarbons.

Reconstruction of microbiome and functionality accelerated crude oil biodegradation of 2,4-DCP-oil-contaminated soil systems using composite microbial agent B-Cl

Biodegradation is one of the safest and most economical methods for the elimination of toxic chlorophenols and crude oil from the environment. In this study, aerobic degradation of the aforementioned compounds by composite microbial agent B-Cl, which consisted of Bacillus B1 and B2 in a 3:2 ratio, was analyzed. The biodegradation mechanism of B-Cl was assessed based on whole genome sequencing, Fourier transform infrared spectroscopy and gas chromatographic analyses. B-Cl was most effective at reducing Cl^- concentrations (65.17%) and crude oil biodegradation (59.18%) at 7 d, which was when the content of alkanes ≤ C₃₀ showed the greatest decrease. Furthermore, adding B-Cl solution to soil significantly decreased the 2,4-DCP and oil content to below the detection limit and by 80.68%, respectively, and reconstructed of the soil microbial into a system containing more CPs-degrading (exaA, frmA, L-2-HAD, dehH, ALDH, catABE), aromatic compounds-degrading (pcaGH, catAE, benA-xylX, paaHF) and alkane- and fatty acid-degrading (alkB, atoB, fadANJ) microorganisms. Moreover, the presence of 2,4-DCP was the main hinder of the observed effects. This study demonstrates the importance of adding B-Cl solution to determine the interplay of CPs with microbes and accelerating oil degradation, which can be used for in-situ bioremediation of CPs and oil-contaminated soil.

Effective remediation and decontamination of organophosphorus compounds using enzymes: From rational design to potential applications

Organophosphorus compounds (OPs) have been widely used in agriculture for decades because of their high insecticidal efficiency, which maintains and increases crop yields worldwide. More importantly, OPs, as typical chemical warfare agents, are a serious concern and significant danger for military and civilian personnel. The widespread use of OPs, superfluous and unreasonable use, has caused great harm to the environment and food chain. Developing efficient and environmentally friendly solutions for the decontamination of OPs is a long-term challenge. Microbial enzymes show potential application as natural and green biocatalysts. Thus, utilizing OP-degrading enzymes for environmental decontamination presents significant advantages, as these enzymes can rapidly hydrolyze OPs; are environmentally friendly, nonflammable, and noncorrosive; and can be discarded safely and easily. Here, the properties, structure and catalytic mechanism of various typical OP-degrading enzymes are reviewed. The methods and effects utilized to improve the expression level, catalytic performance and stability of OP-degrading enzymes were systematically summarized. In addition, the immobilization of OP-degrading enzymes was explicated emphatically, and the latest progress of cascade reactions based on immobilized enzymes was discussed. Finally, the latest applications of OP-degrading enzymes were summarized, including biosensors, nanozyme mimics and medical detoxification. This review provides guidance for the future development of OP-degrading enzymes and promotes their application in the field of environmental bioremediation and medicine.

Acidophilic microorganisms in remediation of contaminants present in extremely acidic conditions

Acidophiles are a group of microorganisms that thrive in acidic environments where pH level is far below the neutral value 7.0. They belong to a larger family called extremophiles, which is a group that thrives in various extreme environmental conditions which are normally inhospitable to other organisms. Several human activities such as mining, construction and other industrial processes release highly acidic effluents and wastes into the environment. Those acidic wastes and wastewaters contain different types of pollutants such as heavy metals, radioactive, and organic, whose have adverse effects on human being as well as on other living organisms. To protect the whole ecosystem, those pollutants containing effluents or wastes must be clean properly before releasing into environment. Physicochemical cleanup processes under extremely acidic conditions are not always successful due to high cost and release of toxic byproducts. While in case of biological methods, except acidophiles, no other microorganisms cannot survive in highly acidic conditions. Therefore, acidophiles can be a good choice for remediation of different types of contaminants present in acidic conditions. In this review article, various roles of acidophilic microorganisms responsible for removing heavy metals and radioactive pollutants from acidic environments were discussed. Bioremediation of various acidic organic pollutants by using acidophiles was also studied. Overall, this review could be helpful to extend our knowledge as well as to do further relevant novel studies in the field of acidic pollutants remediation by applying acidophilic microorganisms.

Surfactant-enhanced mobilization of persistent organic pollutants: Potential for soil and sediment remediation and unintended consequences

This review aims to provide an overview of the sources and reactions of persistent organic pollutants (POPs) and surfactants in soil and sediments, the surfactant-enhanced solubilisation of POPs, and the unintended consequences of surfactant-induced remediation of soil and sediments contaminated with POPs. POPs include chemical compounds that are recalcitrant to natural degradation through photolytic, chemical, and biological processes in the environment. POPs are potentially toxic compounds mainly used in pesticides, solvents, pharmaceuticals, or industrial applications and pose a significant and persistent risk to the ecosystem and human health. Surfactants can serve as detergents, wetting and foaming compounds, emulsifiers, or dispersants, and have been used extensively to promote the solubilization of POPs and their subsequent removal from environmental matrices, including solid wastes, soil, and sediments. However, improper use of surfactants for remediation of POPs may lead to unintended consequences that include toxicity of surfactants to soil microorganisms and plants, and leaching of POPs, thereby resulting in groundwater contamination.

Effects of co-modified biochar immobilized laccase on remediation and bacterial community of PAHs-contaminated soil

Considering the stability and economy of immobilized enzymes, this study prepared co-modified biochar immobilized laccase product named Fe₃O₄@NaBC@GA@LC via orthogonal experimental design and explored its possibility of remediating polycyclic aromatic hydrocarbons (PAHs) contaminated soil in steel plants. Compared with the free laccase treatment, the relative activity of Fe₃O₄@NaBC@GA@LC remained 60 % after 50 days of incubation at room temperature. The relative activity of Fe₃O₄@NaBC@GA@LC could still retain nearly 80 % after five reuses. In the process of simulating the PAHs-contaminated site treatment experiment in Hangzhou Iron and steel plant, immobilized laccase exhibited efficient adsorption and degradation performances and even the removal rate of 5-ring PAHs reached more than 90 % in 40 days, resulting in improving urease activity and dehydrogenase in the soil and promoted the growth of a PAH degrading bacteria (Massilia). Our results further explained the efficient degradation effects of Fe₃O₄@NaBC@GA@LC on PAHs, which make it a promising candidate for PAHs-contaminated soil remediation.

Optimization and Chemical Characterization of Biosurfactant Produced from a Novel Pseudomonas guguanensis Strain Iraqi ZG.K.M

Microbial surfactants are widely used in medical, pharmaceutical, agricultural, industrial, food, and cosmetics applications. In the present study, 85 indigenous bacteria were isolated from petroleum-contaminated soils of the Al Dourah refinery, electric power station, and electric generators in Baghdad, Iraq. Twenty nine isolates gave positive results in both blood agar and blue agar medium and were secondarily screened. One isolate was selected as a potent biosurfactant producer and molecularly identified and recorded in the NCBI GenBank nucleotide sequence database as Pseudomonas guguanensis strain Iraqi ZG.K.M. In optimized conditions, this strain can produce about 3.01 g/l of biosurfactant. The product could reduce the surface tension from 72 to 38 ± 0.33 mN/m and have E₂₄% of 52 ± 0.33%. This biosurfactant was preliminarily specified to be a glycolipid and characterized as a rhamnolipid with anionic nature, usually to be a monorhamnolipid as evident from TLC, FTIR, and GC-MS analyses.

Influence of bioaugmentation in crude oil contaminated soil by Pseudomonas species on the removal of total petroleum hydrocarbon

This study aimed to carry out the bioaugmentation of crude oil/motor oil contaminated soil. The mixture of novel strains Pseudomonas aeruginosa PP3 and Pseudomonas aeruginosa PP4 were used in this bioaugmentation studies. The four different bioaugmentation systems (BS 1-4) were carried out in this experiment labelled as BS 1 (Crude oil contaminated soil), BS 2 (BS 1 + bacterial consortia), BS 3 (Motor oil sludge contaminated soil), and BS 4 (BS 3 + bacterial consortia). The total petroleum hydrocarbon (TPH) was investigated for monitor the effectiveness of bioaugmentation process. The highest TPH removal rate was recorded on BS 4 (9091 mg Kg ^-1) was about 67% followed by 52% on BS 2 (8584 mg Kg ^-1) respectively. The percentage of biodegradation efficiency (BE) of residual crude and motor oil contaminated soil were evaluated by GCMS analysis and the results showed that 65% (BS 2) and 83% (BS 4) respectively. Further the bioaugmented soil was subjected to the plant cultivation (Lablab purpureus) and the results revealed that the L. purpureus was rapidly grown in the systems BS 4 and BS 2 than the system BS 1 and BS 2 which was due to the lesser biodegradation of the crude oil contents. In resultant, it can be concluded that the soil was suitable for the cultivation of plant. Overall, this study revealed that the selected bacterial consortia were effectively degraded the hydrocarbon and act as a potential bioremediator in the hydrocarbon polluted soil in a short period.

Integrating Biochar, Bacteria, and Plants for Sustainable Remediation of Soils Contaminated with Organic Pollutants

The contamination of soil with organic pollutants has been accelerated by agricultural and industrial development and poses a major threat to global ecosystems and human health. Various chemical and physical techniques have been developed to remediate soils contaminated with organic pollutants, but challenges related to cost, efficacy, and toxic byproducts often limit their sustainability. Fortunately, phytoremediation, achieved through the use of plants and associated microbiomes, has shown great promise for tackling environmental pollution; this technology has been tested both in the laboratory and in the field. Plant-microbe interactions further promote the efficacy of phytoremediation, with plant growth-promoting bacteria (PGPB) often used to assist the remediation of organic pollutants. However, the efficiency of microbe-assisted phytoremediation can be impeded by (i) high concentrations of secondary toxins, (ii) the absence of a suitable sink for these toxins, (iii) nutrient limitations, (iv) the lack of continued release of microbial inocula, and (v) the lack of shelter or porous habitats for planktonic organisms. In this regard, biochar affords unparalleled positive attributes that make it a suitable bacterial carrier and soil health enhancer. We propose that several barriers can be overcome by integrating plants, PGPB, and biochar for the remediation of organic pollutants in soil. Here, we explore the mechanisms by which biochar and PGPB can assist plants in the remediation of organic pollutants in soils, and thereby improve soil health. We analyze the cost-effectiveness, feasibility, life cycle, and practicality of this integration for sustainable restoration and management of soil.

Microbial community succession during crude oil-degrading bacterial enrichment cultivation and construction of a degrading consortium

Microbial community succession during the enrichment of crude-oil-degrading bacteria was analyzed using Illumina high-throughput sequencing to guide bacterial isolation and construction of a bacterial consortium. Community change occurred in 6 days; the most abundant phylum changed from Proteobacteria to Actinobacteria; the most abundant genera were Dietzia and unspecified_Idiomarinaceae. Two crude oil-degrading strains, Rhodococcus sp. OS62-1 and Dietzia sp. OS33, and one weak-crude-oil-degrading strain, Pseudomonas sp. P35, were isolated. A consortium comprising Rhodococcus sp. OS62-1 and Pseudomonas sp. P35 showed the highest crude-oil-degrading efficiency, reaching 85.72 ± 3.21% within 7 days, over a wide pH range (5–11) and salinity (0–80 g·L−1). Consumption of saturated hydrocarbons, aromatic hydrocarbons, and resins was greater by the consortium than by a single strain, as was degradation of short-chain-alkanes (C13–C17) according to gas-chromatography. The bacterial consortium provides technical support for bioremediation of crude oil pollution.

Whole-genome analysis guided molecular mechanism of cyanogenic glucoside degradation by yeast isolated from Prunus mume fruit syrup

Consumption of fermented Prunus mume fruit (maesil) sugar syrup raise a health concern due to the presence of the cyanogenic glucoside amygdalin. The goal of the present study was to investigate the amygdalin degradation potential and genome profile of the native microbes found in maesil syrup. The microbial profile analysis revealed that yeast is the predominant microorganism native to maesil syrup and that the isolated yeast cells showed a remarkable potential for amygdalin reduction (99.7%). Moreover, the reduction in amygdalin was inversely proportional to the growth of the isolated yeast. The whole-genome analysis revealed that the isolated yeast is Zygosaccharomyces rouxii (genome size 10 Mb, 39.25% of GC content). Of the 5250 genes (64.88%) predicted in the Z. rouxii genome, 5245 (99.90%) were annotated using NCBI Non-Redundant, UniProt, and InterProScan databases. The genome of the isolated Z. ruoxii harbored 2.03% of repeats and 0.68% of non-coding RNAs. Protein prediction indicated that β-glycosidases and hydroxynitrile lyase may play a key role in amygdalin degradation. The predicted degradation initiated by β-glycosidases that hydrolyze α-glucosidic bonds of amygdalin results in α-hydroxy nitriles (cyanohydrins) that are subsequently converted into carbonyl compounds (benzaldehyde) and hydrogen cyanide catalyzed by hydroxynitrile lyases. Present findings provide valuable data for constructing engineered microorganisms that can degrade amygdalin. Further analysis of Z. rouxii may elucidate the exact mechanism of amygdalin reduction in the production of maesil syrup.

Eco-toxicological effect of a commercial dye Rhodamine B on freshwater microalgae Chlorella vulgaris

In this study, the acute toxicity effects of a fluorescent xanthene dye, Rhodamine B (RhB), widely used in textile, paper, and leather industries was investigated on a freshwater microalgae Chlorella vulgaris. The acute toxicity of RhB on C. vulgaris was determined by examining the growth, cell morphology, pigment production, protein content, and the activities of oxidative stress enzymes. Based on the results of the toxicity study of 24-96 h, the median inhibitory concentration (IC₅₀) values ranged from 69.94 to 31.29 mg L^-1. The growth of C. vulgaris was conspicuously inhibited by RhB exposure, and the cell surfaces appeared to be seriously shrunk in SEM analysis. The growth of C. vulgaris was hindered after exposure to graded concentrations (10-50 mg L^-1) of RhB. A significant reduction in growth rate, pigment synthesis (chlorophyll a, chlorophyll b, and carotenoid), and protein content was recorded in a dose-dependent manner. After 96 h exposure of C. vulgaris to 50 mg L^-1 RhB, chlorophyll a, chlorophyll b, carotenoids, and protein contents were reduced by 71.59, 74.90, 65.84, and 74.20%, respectively. The activities of the antioxidant enzymes peroxidase (POD), and catalase (CAT) also increased markedly in the presence of RhB. A notable effect was observed on oxidative enzymes catalase and peroxidase, indicating that oxidative stress may be the primary factor in the inhibition of growth and pigment synthesis. Consequently, the experimental acute toxicity data were compared to the QSAR prediction made by the ECOSAR programme. Results showed that the experimental acute toxicity values were 67.74-fold lower than the ECOSAR predicted values. The study provides convincing evidence for the metabolic disruption in the ubiquitous microalgae C. vulgaris due to the RhB dye toxicity.

Nitrogen dependence of rhamnolipid mediated degradation of petroleum crude oil by indigenous Pseudomonas sp. WD23 in seawater

Effect of oil spills on living forms demands for safe, ecofriendly and cost-effective methods to repair the damage. Pseudomonads have exceptional tolerance to xenobiotics and can grow at varied environmental conditions. This study aims at biosurfactant mediated degradation of petroleum crude oil by an indigenous Pseudomonas sp. WD23 in sea water. Pseudomonas sp. WD23 degraded 34% of petroleum crude oil (1.0% v/v) on supplementation of yeast extract (0.05 g/L) with glucose (1.0 g/L) in seawater. The strain produced a biosurfactant which was confirmed as a rhamnolipid (lipid: rhamnose 1:3.35) by FT-IR, LCMS and quantitative analysis. Produced rhamnolipid had low CMC (20.0 mg/L), emulsified petroleum oils (75-80%) and had high tolreance to varied conditions of pH, temperature and ionic strength. OFAT studies were performed to analyse the effect of petroleum crude oil, glucose, inoculum, yeast extract, pH, agitation speed and incubation time on degradation by Pseudomonas sp. WD23. Petroleum crude oil and glucose had significant effect on biodegradation, rhamnolipid production and growth, further optimized by central composite design. At optimum conditions of 3.414% v/v PCO and 6.53 g/L glucose, maximum degradation of 81.8 ± 0.67% was observed at pH 7.5, 100 RPM, 15.0% v/v inoculum in 28 days, with a 3-fold increase in biodegradation. GCMS analysis revealed degradation (86-100%) of all low and high molecular weight hydrocarbons present in petroleum crude oil. Hence, the strain Pseudomonas sp. WD23 can be effectively developed for management of oil spills in seas and oceans due to its excellent degradation abilities.

Laccase production by Pleurotus ostreatus using cassava waste and its application in remediation of phenolic and polycyclic aromatic hydrocarbon-contaminated lignocellulosic biorefinery wastewater

The treatment of contaminants from lignocellulosic biorefinery effluent has recently been identified as a unique challenge. This study focuses on removing phenolic contaminants and polycyclic aromatic hydrocarbons (PAHs) from lignocellulosic biorefinery wastewater (BRW) applying a laccase-assisted approach. Cassava waste was used as a substrate to produce the maximum yield of laccase enzyme (3.9 U/g) from Pleurotus ostreatus. Among the different inducers supplemented, CuSO₄ (0.5 mM) showed an eight-fold increase in enzyme production (30.8 U/g) after 240 h of incubation. The catalytic efficiency of laccase was observed as 128.7 ± 8.47 S^-1mM^-1 for syringaldazine oxidation at optimum pH 4.0 and 40 °C. Laccase activity was completely inhibited by lead (II) ion, mercury (II) ion, sodium dodecyl sulphate, sodium azide and 1,4 dithiothretiol and induced significantly by manganese (II) ion and rhamnolipid. After treating BRW with laccase, the concentrations of PAHs and phenolic contaminants of 1144 μg/L and 46160 μg/L were reduced to 96 μg/L and 16100 μg/L, respectively. The ability of laccase to effectively degrade PAHs in the presence of different phenolic compounds implies that phenolic contaminants may play a role in PAHs degradation. After 240 h, organic contaminants were removed from BRW in the following order: phenol >2,4-dinitrophenol > 2-methyl-4,6-dinitrophenol > 2,3,4,6-tetrachlorophenol > acenaphthene > fluorine > phenanthrene > fluoranthene > pyrene > anthracene > chrysene > naphthalene > benzo(a)anthracene > benzo(a)pyrene > benzo(b)fluoranthene > pentachlorophenol > indeno(1,2,3-cd)pyrene > benzo(j) fluoranthene > benzo[k]fluoranthène. The multiple contaminant remediation from the BRW by enzymatic method, clearly suggests that the laccase can be used as a bioremediation tool for the treatment of wastewater from various industries.

Molecular response of Anoxybacillus sp. PDR2 under azo dye stress: An integrated analysis of proteomics and metabolomics

Treating azo dye wastewater using thermophilic bacteria is considered a more efficient bioremediation strategy. In this study, a thermophilic bacterial strain, Anoxybacillus sp. PDR2, was regarded as the research target. This strain was characterized at different stages of azo dye degradation by using TMT quantitative proteomic and non-targeted metabolome technology. A total of 165 differentially expressed proteins (DEPs) and 439 differentially metabolites (DMs) were detected in comparisons between bacteria with and without azo dye. It was found that Anoxybacillus sp. PDR2 can degrade azo dye Direct Black G (DBG) through extracellular electron transfer with glucose serving as electron donors. Most proteins related to carbohydrate metabolism, including acetoacetate synthase, and malate synthase G, were overexpressed to provide energy. The bacterium can also self-synthesize riboflavin as a redox mediator of in vitro electron transport. These results lay a theoretical basis for industrial bioremediation of azo dye wastewater.

Impact of biosurfactant and iron nanoparticles on biodegradation of polyaromatic hydrocarbons (PAHs)

Polycyclic aromatic hydrocarbons (PAHs) are hazardous toxic contaminants and considered as primary pollutants due to their persistent nature and most of them are carcinogenic and mutagenic. The key challenge in PAHs degradation is their hydrophobic nature, which makes them one of the most complex materials and inaccessible by a broad range of microorganisms. This bioavailability can be increased by using a biosurfactant. In the present study mixed PAHs were degraded using the biosurfactant producing bacterial strains. In addition, iron nanoparticles were synthesized and the impact of iron nanoparticles on the growth of the mixed bacterial strains (Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3) was optimized. The mixed PAHs (anthracene, pyrene, and benzo(a)pyrene) degradation was enhanced by addition of biosurfactant (produced by Bacillus subtilis A1) and iron nanoparticles, resulting in 85% of degradation efficiency. The addition of the biosurfactant increased the bioavailability of the PAHs in the aqueous environment, which might help bacterial cells for the initial settlement and development. The addition of iron nanoparticles increased both bacterial biomass and PAHs adsorption over their surface. These overall interactions assisted in the utilization of PAHs by the mixed bacterial consortia. This study illustrates that this integrated approach can be elaborated for the removal of the complex PAHs pollutants from soil and aqueous environments.

Biodegradation kinetics of binary mixture of hexadecane and phenanthrene by the bacterial microconsortium

Crude oil bioremediation requires a correct selection of potential biodegraders to address the hazard. The present study investigates biodegradation kinetics of single aliphatic (Hexadecane, HEX), aromatic (Phenanthrene, PHE), and binary mixture (HEX + PHE) as co-contaminants by axenic cultures of A. fabrum SLAJ 731, B. subtilis RSL2 and P. aeruginosa P7815 and their consortium. A proposed integrated kinetic model combining first-order exponential decay and the Monod equation is well-fitted to degradation data. Maximum degradations of both the substrates were observed for microcosm, indicating synergistic effects of selected strains. The degradation rate indicated parallel utilization of HEX while serial utilization of PHE by selected strains. Maximum HEX and PHE degradations of 92.4 and 88.7 % were achieved by microconsortium, which increased to 97.2 and 91.9 % for the binary mixture. The biodegradation efficiencies of HEX and PHE were linearly correlated with Alkane hydroxylase and Catechol-2,3-dioxygenase activities, respectively.

Insight into bacterial community profiles of oil shale and sandstone in ordos basin by culture-dependent and culture-independent methods

To promote the exploitation of unconventional oil resources by indigenous microorganisms, the bacterial community profiles of oil shale and sandstone in Ordos Basin were investigated using Illumina Miseq sequencing combined with the culture-based method, which was performed and reported in this literature for the first time. A total of 601 operational taxonomic units (OTUs) were obtained from collected samples, the predominant phylum present in all samples was Proteobacteria (76.96%-93.07%). Discriminatory bacterial community profiles existed in those samples by culture-dependent and culture-independent methods, with variations not only in diversity indices but also in the abundance of bacteria at different genus levels. The dominant genera in cultured sandstone sample (SCB), uncultured sandstone sample (SUB), cultured shale sample (YCB), uncultured shale sample (YUB) were Enhydrobacter (71.62%), Acidovorax (42.44%), Pseudomonas (40.13%), Variovorax (70.02%), respectively. Both sample sources and culturing methods were the principal factors affecting the variation, while the communities' structures were favored primarily by culture-dependent or culture-independent approaches. The high abundance of hydrocarbon degradation-related genes was exhibited in YCB, which reveals a great potential for utilization of the culture-dependent method in shale oil exploitation. This study provided guidance for the exploitation of shale oil and sandstone oil by artificial utilization of indigenous bacteria.

Microwave-assisted thermochemical conversion of Zr-FeOOH nanorods to Zr-ZnFe2O4 nanorods for bacterial disinfection and photo-Fenton catalytic degradation of organic pollutants

Herein, we report a CoO_x-loaded Zr-doped ZnFe₂O₄ (CoO_x/Zr-ZFO) NR photocatalyst synthesized by successive microwave and wet impregnation methods for bacterial inactivation and degradation of organic pollutants. For the first time, microwave treatment was used for Zn attachment on hydrothermally synthesized self-assembled Zr-FeOOH NRs to produce Zr-doped ZnFe₂O₄ (Zr-ZFO) NRs. The lowest bandgap energy (1.96 eV) enables for significant absorption in the visible light region, which helps to improve bacteria degradation inactivation efficiency. Further, various metal oxides (Cu, Ag and Co) were loaded onto the surface of photocatalysts (Zr-ZFO NRs) by a wet impregnation method. As-synthesized CoO_x/Zr-ZFO-3 NRs were systematically characterized and used as photocatalysts for inactivation of E. coli and S. aureus and degradation of organic pollutants. The CoO_x/Zr-ZFO-3 NR photocatalyst exhibited better inactivation efficiency (99.4 %) than other metal oxide-loaded Zr-ZFO NRs (Ag₂O_x-loaded Zr-ZFO NRs (33.6 %), CuO_x-loaded Zr-ZFO NRs (77.6 %)). Additionally, the optimum CoO_x/Zr-ZFO-3 NR photocatalyst showed 98.3 % and 98.1 % degradation efficiencies for BPA and orange II dye, respectively, under visible light irradiation (λ ≥ 420 nm). Therefore, this work affords a novel, simple and rapid approach for the development of photocatalysts which active in visible light for bacterial disinfection and organic degradation.

Characterization of two novel strains of Pseudomonas aeruginosa on biodegradation of crude oil and its enzyme activities

Crude oil contaminant is one of the major problem to environment and its removal process considered as most challenging tool currently across the world. In this degradation study, crude oil hydrocarbons are degraded on various pH optimization conditions (pH 2, 4,6,7,8 and 10) by using two biosurfactant producing bacterial strains Pseudomonas aeruginosa PP3 and Pseudomonas aeruginosa PP4. During crude oil biodegradation, degradative enzymes alkane hydroxylase and alcohol dehydrogenase were examined and found to be higher in PP4 than PP3. Biodegradation efficiency (BE) of crude oil by both PP3 and PP4 were analysed by gas chromatography mass spectroscopy (GCMS). Based on strain PP3, the highest BE was observed in pH 2 and pH 4 were found to be 62% and 69% than pH 6, 7, 8 and 10 (47%, 47%, 49% and 45%). It reveals that PP3 was survived effectively in acidic condition and utilized the crude oil hydrocarbons. In contrast, the highest BE of PP4 was observed in pH 7 (78%) than pH4 (68%) and pH's 2, 6, 8 and 10 (52%, 52%, 43% and 53%) respectively. FTIR spectra results revealed that the presence of different functional group of hydrocarbons (OH, -CH₃, CO, C-H) in crude oil. GCMS results confirmed that both strains PP3 and PP4 were survived in acidic condition and utilized the crude oil hydrocarbons as sole carbon sources. This is the first observation on biodegradation of crude oil by the novel strains of Pseudomonas aeruginosa in acidic condition with higher BE. Overall, the extracellular enzymes and surface active compounds (biosurfactant) produced by bacterial strains were played a key role in crude oil biodegradation process.

The car tank lid bacteriome: a reservoir of bacteria with potential in bioremediation of fuel

Bioprospecting of microorganisms suitable for bioremediation of fuel or oil spills is often carried out in contaminated environments such as gas stations or polluted coastal areas. Using next-generation sequencing (NGS) we analyzed the microbiota thriving below the lids of the fuel deposits of diesel and gasoline cars. The microbiome colonizing the tank lids differed from the diversity found in other hydrocarbon-polluted environments, with Proteobacteria being the dominant phylum and without clear differences between gasoline or diesel-fueled vehicles. We observed differential growth when samples were inoculated in cultures with gasoline or diesel as the main carbon source, as well as an increase in the relative abundance of the genus Pseudomonas in diesel. A collection of culturable strains was established, mostly Pseudomonas, Stenotrophomonas, Staphylococcus, and Bacillus genera. Strains belonging to Bacillus, Pseudomonas, Achromobacter, and Isoptericola genera showed a clear diesel degradation pattern when analyzed by GC-MS, suggesting their potential use for bioremediation and a possible new species of Isoptericola was further characterized as hydrocarbon degrader.

Study on a Strain of Lysinibacillus sp. with the Potential to Improve the Quality of Oil Sands

A strain of Lysinibacillus sp., named as Y316, can degrade heavy fractions such as resins and asphaltenes in oil sand. We used Y316 to degrade oil sand samples for 35 days. After bacterial degradation, the oil sand degradation efficiency was 5.88%, while the degradation efficiency of the control group was only 0.29% under the same conditions. Compared with the control group, the saturated content of oil sand in the degradation group increased from 9.56 to 14.39%. After degradation, the resin and asphaltene fractions decreased by 5.34 and 4.77%, respectively. The results of the vaporizable fraction analysis also confirmed the degradation of heavy fractions and the formation of light fractions. After 35 days of degradation, the vaporizable fractions of saturates increased by 3.76 times. The results indicate that Y316 has great significance for improving the quality of oil sands and assisting in oil sand exploitation.

Study on the Effect of Petroleum Components on the Elution of Oily Sludge by a Compound Biosurfactant

Currently, research on oily sludge treatment mainly focuses on optimizing the deoiling effect and research on the deoiling mechanism, and the influence of petroleum components on the properties and treatment of oily sludge is rarely considered. Therefore, in this study, petroleum substances in three types of oil sludge were eluted using the biosurfactant cleaning technology, and the influence of petroleum components on the cleaning process was explored. The results showed that the biosurfactants rhamnolipid and sophorolipid had a synergistic effect, and the oil-removal rate was as high as 92.2% when the SL mass fraction was 0.4 in the compound biosurfactant. Three types of oily sludge, wellsite-landing sludge, pipeline-landing sludge, and tank-bottom sludge, were cleaned by the compound biosurfactant; the results showed that the residual petroleum substance in liquid and solid phases, the turbidity value, and the zeta-potential value of the supernatant of oil sludge samples after cleaning increased with the increase in the heavy components of the oily sludge, and the oil-removal rate decreased gradually. After cleaning, the average relative molecular weight of the three oil phases increased with the heavy components, which was increased by 1.83, 4.83, and 10.72%, respectively, and the increase in molecular weight increased the difficulty of cleaning. After cleaning, the retention time and peak intensity of the oil sample changed significantly, and it had a stronger elution effect on low-molecular-weight alkanes. It was found that the compound biosurfactant had a good elution effect on polycyclic aromatic hydrocarbons, but the increase in the content of heavy components and the increase in aromatic rings increased the difficulty of cleaning. Moreover, it was found that the compound biosurfactant could not completely elute the petroleum substances on the surface of solid particles, and the asphaltene components in the oil phase were more difficult to elute than other components.