The impact of sewage sludge treatment on the content of selected heavy metals and their fractions

Abiotic and biotic roles of metals in the anaerobic digestion of sewage sludge: A review

Anaerobic digestion (AD) is a promising technique for sludge treatment and resource recovery. Metals are very important components of sludge and can have substantial effects on its complex nature and microbial activity. However, systematic reviews have not addressed how metals in sludge affect AD and how they can be regulated to improve AD. This paper comprehensively reviews the effects of metals on the AD of sludge from both abiotic and biotic perspectives. First, we introduce the contents and basic characteristics (e.g., chemical forms) of intrinsic metals in sewage sludge. Then, we summarise the main mechanism by which metals influence sludge properties and the methods for removing metals and thus improving AD. Next, we analyze the effects of both intrinsic and exogenous metals on the enzymes and microbial communities involved in anaerobic bioconversion, focusing on the types, critical concentrations and valence states of the metals. Finally, we propose ideas for future research on the roles of metals in the AD of sludge. In summary, this review systematically clarifies the roles of metals in the AD of sludge and provides a reference for improving AD by regulating these metals.

Pharmaceutical active compounds in sewage sludge: Degradation improvement and conversion into an organic amendment by bioaugmentation-composting processes

Around 143,000 chemicals find their fate in wastewater treatment plants in the European Union. Low efficiency on their removal at lab-based studies and even poorer performance at large scale experiments have been reported. Here, a coupled biological technology (bioaugmentation and composting) is proposed and proved for pharmaceutical active compounds degradation and toxicity reduction. The optimization was conducted through in situ inoculation of Penicillium oxalicum XD 3.1 and an enriched consortium (obtained from non-digested sewage sludge), into pilot scale piles of sewage sludge under real conditions. This bioaugmentation-composting system allowed a better performance of micropollutants degradation (21 % from the total pharmaceuticals detected at the beginning of the experiment) than a traditional composting process. Particularly, inoculation with P. oxalicum allowed the degradation of some recalcitrant compounds like carbamazepine, cotinine and methadone, and also produced better stabilization features in the mature compost (significant passivation of copper and zinc, higher macronutrients value, adequate physicochemical conditions for soil direct application and less toxic effect on germination) compared to the control and the enriched culture. These findings provide a feasible, alternative strategy to obtain a safer mature compost and a better removal of micropollutants performance at large scale.

Evaluation of GLDA-acid on sludge treatment effect and seed germination analysis

Mixtures of N, N-bis(carboxymethyl)-L-glutamic acid tetrasodium salt (GLDA) with citric acid (CA), glutamic acid (GLU), and aspartic acid (ASP) at the optimal proportion of 1:1, 1:2, and 2:1, respectively. They were employed for heavy metal removal from the sludge. The removal rate of common heavy metals (Cu, Pb, Zn, Ni, Cr, and Cd) and the retention degree of nutrients (total nitrogen, total phosphorus, available-N, Olsen-P, and organic matter) in the treated sludge were analyzed. Fuzzy comprehensive evaluation of the sludge was performed using MATLAB to determine the agricultural grade of the sludge. The sludge after GLDA-acid treatment was mixed with soil at different proportions, and Chinese cabbage, cucumber, and wheat were cultured. SPSS was used for survival analysis to analyze the feasibility of the sludge agriculture. The results showed that the optimal ratio of GLDA-CA and GLDA-GLU was 1:2 and that of GLDA-ASP was 1:1. After GLDA-acid treatment, the sludge was classified as Grade A agricultural sludge based on MATLAB fuzzy comprehensive evaluation and analysis. When the amount of sludge added was 20%, the growth of Chinese cabbage, cucumber, and wheat was promoted. Survival analysis further proved that the amount of sludge only affected the median germination time. Without considering the economic benefits, GLDA-acid can be preferred for sludge treatment, which can not only effectively remove heavy metals in sludge, but also have a small impact on agricultural use.

Nationwide review of heavy metals in municipal sludge wastewater treatment plants in China: Sources, composition, accumulation and risk assessment

Systematically analyzing the problem of heavy metals in the municipal sludge, a meta-analysis of nine metals was undertaken to distinguish the sources and sinks of those with the impact of their accumulation on the environment. Municipal sludge was rich in N, P and K nutrients, was found to contain heavy metals comprising the descending order Zn > Mn > Cu > Cr > Pb > Ni > As > Cd > Hg. The forms, in which heavy metals accumulated in geographical regions, were characterized. The geographical distribution of heavy metals in the sludge showed a significant difference, with higher accumulation in Eastern and Southern regions, however, the risk evaluations showed the higher risk of heavy metals accumulation in Eastern and Western regions. Agricultural, industrial and traffic activities, and storm water pipeline sediments were identified as the main sources of heavy metals in the sludge. The correlation analysis elucidated the role of the total organic carbon in the accumulation of heavy metals in sludge. Municipal sludge is endowed with resource properties due to the detection of heavy metal contents thresholds in household products and its own resource-attributable enrichment behavior, which requires deduction of environmental risks.

Accumulation potential of heavy metals at different growth stages of Pacific white leg shrimp, Penaeus vannamei farmed along the Southeast coast of Peninsular India: A report on ecotoxicology and human health risk assessment

This study compared the heavy metal concentration in water, sediment, and shrimp at different growth stages of culture and subsequently evaluated the ecotoxicological and human health risk status. Total trace element concentration in the water, sediment and shrimp ranged from not detected (ND) (Hg) to 91.05 (Fe) μg/L, 0.01 (Hg) to 19, 246.33 (Fe) mg/kg, and ND (Hg) to 13.98 (Fe) mg/kg, respectively. Toxic metals such as, Cd, Hg, and Pb in shrimps ranged from ND to 2.11 mg/kg, ND to 0.158 mg/kg, ND to 0.088 mg/kg, and ND to 0.469 mg/kg, respectively. Toxic heavy metals at all the growth stages of shrimps (days of culture (DOC)-01 to DOC-90) were found below the maximum residual limit (MRL) of 0.5 mg/kg set by the European Commission (EC). Similarly, Cu, Zn, and As concentrations in shrimp were also far below the MRLs of 30 mg/kg, 100 mg/kg, and 76 mg/kg set by the World Health Organization and Food Safety and Standard Authority of India, respectively. The concentration of heavy metals increased from DOC-01 to DOC-90 and was positively correlated with the length and weight of the shrimps (p < 0.05). The risk assessment was estimated for both Indians and Americans and found no carcinogenic (lifetime cancer risk (LCR) < 10^-4) and non-carcinogenic (THQ and TTHQ<1) health risks through consumption of shrimp cultured in this region. The hazard quotient (HQ_dermal < 1), hazard index (HI < 1), and LCR (<10^-4) values of the heavy metals indicated that the dermal absorption might not be a concern for the local fishermen and marine fish/shrimp farmworkers. Water and sediment quality indices were applied to assess the surface water and sediment quality, and their results were found nil to low levels of heavy metal contamination at all the sampling sites. All heavy metals studied in sediments were < effect range low (ERL) and < threshold effect level (TEL), indicating no adverse biological effects on aquatic organisms. Therefore, regular monitoring of the shrimp aquaculture system throughout the crop will provide evidence of heavy metals bioaccumulation in shrimps. This research will provide baseline data to help farmers establish the optimal aquaculture practices and regulatory authorities to formulate legislation and strategies to reduce heavy metal biomagnification in shrimps from farm to fork.

Cation exchange resin pretreatment enhancing methane production from anaerobic digestion of waste activated sludge

The application of anaerobic digestion (AD) to treat waste activated sludge (WAS) still exhibits some limitations, such as low methane production. In this study, cation exchange resin (CER) pretreatment was explored to enhance the efficiency of the AD of WAS. Based on the response surface methodology, the optimal conditions for CER pretreatment were reaction time of 7.4 h, 33.8 g CER (wet weight) /g volatile solids and sludge total solids of 2.4%. Under these optimal CER pretreatment conditions, approximately 30% of metals were removed from the WAS, particularly organic-binding metals. This metal removal disrupted the structures of extracellular polymer substances and led to sludge deflocculation, thereby releasing large amounts of organic substances from the sludge solids. Batch AD experiments showed that CER pretreatment increased the maximal production of volatile fatty acids and methane by 565.7% and 80.5%, respectively. Additionally, CER pretreatment promoted each stage of AD (i.e. solubilisation, hydrolysis, acidification and methanation) and the corresponding activities of key enzymes. Experimental results for semi-continuous AD further confirmed that CER pretreatment enhanced the proportion of methane in the biogas (from 62.75 ± 2.14% to 73.96 ± 0.99%) and the production of methane. An analysis of changes in the microbial communities demonstrated that CER pretreatment enhanced the abundance of microorganisms involved in hydrolysis, acidification and acetification and changed the major methanogenic pathway from acetoclastic methanogens to methylotrophic methanogens. These findings are expected to provide a reference for developing new pretreatment methods for enhancing anaerobic biodegradability of organic matters.

Bioremediation of potentially toxic elements of sewage sludge using sunflower (Heliantus annus L.) in greenhouse and field conditions

The bioremediation of sewage sludge, containing potentially toxic elements (heavy metals), by the hyperaccumulator sunflower (Helianthus annus L.), was determined in greenhouse (G) and field (F) conditions in Isfahan, Iran. The soil pots, mixed with dried sewage sludge at 0, 15, 30, 45, and 60 mg/kg, were planted with sunflower seedlings and kept in the greenhouse (G) and in the field (F). Different soil physicochemical and plant biochemical properties including heavy metal uptake of nickel (Ni), chromium (Cr), lead (Pb), and cadmium (Cd) were determined. In contrast with the soil pH, soil salinity, organic matter, nitrogen, and not soil CaCO₃, were significantly enhanced by increasing sewage sludge. Sewage sludge was significant on plant uptake of Ni (2.27-4.25 mg/kg), Cr (3.27-4.75 mg/kg), Cd (13.85-15.27 mg/kg), and total chlorophyll (1.69-1.99 mg/g) in the greenhouse, and plant uptake of Ni (1.75-2.75 mg/kg) and Cd (1.37-2.25 mg/kg), and chlorophyll b (0.06-0.26 mg/g), total chlorophyll (0.57-1.16 mg/g), and carotenoids (1.10-1.61 mg/g) in the field. Although Pb was not significantly affected by sewage sludge, it showed the highest bioaccumulation factor of 0.96 at 15 mg/kg. Interestingly, the heavy metals were all positively and significantly correlated with each other and with plant carotenoids, similar to the positive and significant correlations between Pb with chlorophyll a and b. Accordingly, the increased levels of carotenoids, acting as antioxidant, may be an indicator of oxidative stress. Sunflower plants can be used as an efficient method for the bioremediation of the soils polluted with sewage sludge including Ni, Cr, and Cd.

Variation and factors on heavy metal speciation during co-composting of rural sewage sludge and typical rural organic solid waste

In this study, a co-composting of rural organic solid waste (rural sewage sludge, kitchen waste and corn stalks) was conducted to analyze the variation of heavy metals (As, Cu, Cr, Ni, Pb, Hg, and Zn) and their major influencing factors. During composting, significant changes were observed in the total contents of heavy metals (p < 0.01): the total concentrations of As, Cu, Hg, Pb and Zn increased by 7.5%, 54.1%, 26.3%, 15.8%, and 34.2%, whereas that of Cr and Ni decreased by 71.3% and 33.4%, respectively. Heavy metals were mainly bound to the oxidizable and residual fractions. Spearman and Redundancy analysis (RDA) indicated that substances were significantly correlated with the changes in speciation of heavy metals, among all the factors, while pH and temperature were the dominating environmental influencing parameters. Several metal-resistant bacterial genera (Pseudomonas, Paenibacillus, Bacillus, Acinetobacter, Desulfovibrio, and Ochrobactrum, etc) were observed, with significant explanatory capacity for the changes in heavy metals. Composting showed a poor effect on heavy metal passivation, except for that of As. After composting, the heavy metal contents were consistent with the application standards. The evaluation of potential ecological risk showed a high cumulative ecological risk (336.9) of heavy metals. This study provides technical support and practical information for the disposal and safe recycling for rural organic solid waste.

Heavy metal fixation of lead-contaminated soil using Morchella mycelium

With the exploitation of lead-zinc deposits, lead content around mining areas has seriously exceeded the recommended level. The most challenging problem is how to reduce lead contamination in soil efficiently. In this study, we developed a method to remediate lead-contaminated soil by adding Morchella mycelium. First, we compared the repair effects of mycelium and hyperaccumulator by conducting pot experiments. Then, we investigated the mechanism through which mycelium repairs lead-contaminated soil by conducting simulation experiments. Results showed that using mycelium was a more efficient way to repair soil than using hyperaccumulator. Compared with the untreated group, mycelium reduced the lead content of crops by 34.83 % and raised dry biomass by 134.05 % when lead addition was 800 mg/kg. After mycelium fixation, soil catalase, urease, cellulase, and sucrase activities were significantly enhanced, and the bioavailability of lead decreased significantly. The lead solution exposure simulation test showed that Morchella mycelium immobilized lead due to its extracellular secretions. That is, mycelium secreted metabolites and lead to form salt crystals, reducing bioavailable lead content. In addition, Morchella mycelium restoration may effectively improve soil fertility and increase crop yields. Thus, mycelium may be used successfully in alternative green repair methods for environmental heavy metal remediation.

Speciation Characteristics and Ecological Risk Assessment of Heavy Metals in Municipal Sludge of Huainan, China

In order to fully understand the morphological characteristics and pollution status of heavy metals in the dewatered sludge of Huainan Municipal sewage treatment plant, the physical and chemical properties were analyzed, and the content and occurrence forms of heavy metals (As, Cu, Zn, Pb, Cd, Cr, and Ni) in the sludge were studied using the geological accumulation method (Igeo), risk assessment coding method (RAC), and potential ecological risk index method to evaluate the ecological risk. The results showed that the municipal sludge in Huainan was rich in nutrients, with good prospects for agricultural utilization. There were differences in the morphological distributions of different heavy metals. The Igeo values for Ni, As, Cr, and Pb were below 0. The results of RAC indicated that the risk level of Cr in sludge was a low risk, and those of other heavy metals were moderate risks. The potential ecological risk of Cd had the highest potential ecological risk, and the other six metals were of low ecological risk. This conclusion can provide basic data and a theoretical reference for the comprehensive utilization of sludge in sewage treatment plants.

Insight into sludge dewatering by advanced oxidation using persulfate as oxidant and Fe2+ as activator: Performance, mechanism and extracellular polymers and heavy metals behaviors

This study established a Fe²⁺/persulfate oxidation system to dewater sludge in WWTPs. Dewatering performance, persulfate consumption and the variations of sludge pH, TN and TP during dewatering process were monitored. EPS and ζ-potential behaviors for ameliorating sludge dewatering was investigated. Transformation, leaching toxicity and environmental risk of heavy metals in sludge during dewatering were determined. Results demonstrated that after treated by Fe²⁺/persulfate oxidation system with 0.6 mmol/g-VS of persulfate at Fe²⁺/persulfate molar ratio 0.6, WC decreased to 53.5% and SCST increased to 4.15, which implied an excellent improvement of sludge dewatering. The fast persulfate consumption, the decrease of sludge pH and the increase of TN illustrated the positive effects of Fe²⁺ in activating persulfate and the decomposition of EPS by the activation products, SO₄^•- and ^•OH. Another product (Fe³⁺) generated during persulfate activation could decrease the content of phosphorus-containing matter (released from EPS decomposition) through the precipitation reaction with PO₄^3-. The decrease of TOC and UV-254 happened in HPO-A, HPO-N and TPI-A organic substance of EPS (mainly contained in TB-EPS fraction) indicated that the destruction of hydrophobic organic matter of EPS would stimulate the release of bound water, which was beneficial to dewater sludge. The largest protein loss in TB-EPS (from 24.5 to 10.7 mg/L) indicated that the effective decomposition of TB-EPS could significantly ameliorate sludge dewatering. The increase of ζ-potential indicated the degradation of organic matter in EPS with negative charge. To sum up, the destruction of protein-like substances in hydrophobic organic matter of TB-EPS was the main mechanism for improving sludge dewatering by Fe²⁺/persulfate oxidation system. 3D-EEM fluorescence spectroscopy analysis proved that these protein-like substances were mainly tryptophan protein and humic acid. Moreover, due to the disruption of EPS, the contents of heavy metals in sludge, and their leaching toxicity and environmental risk were reduced. Therefore, Fe²⁺/persulfate oxidation system has potential and application prospects to improve sludge dewatering and optimize sludge management in WWTPs.

Chemical speciation and distribution of potentially toxic elements in soilless cultivation of cucumber with sewage sludge biochar addition

Potentially toxic elements in municipal sewage sludge can be effectively immobilized during biochar production via pyrolysis. However, the bioavailability of these elements when biochar is applied in soilless cultivation to improve substrate quality has yet to be sufficiently established. In this study, we investigated the chemical speciation and cucumber plant uptake of potentially toxic elements in soilless cultivation when the growth substrate was amended with sewage sludge biochar (0, 5, 10, 15, and 20 wt%). It was found that the addition of 10 wt% biochar was optimal with respect to obtaining a high cucumber biomass and achieving low environmental risk considering the occurrence of hormesis. When the substrate was amended with 10 wt% biochar, cucumber fruit contained lower concentrations of As, Cr, and Zn and smaller bioavailable fractions of As, Cd, Cr, Ni, Cu, and Zn compared with the fruit of control plants, thereby meeting national safety requirements (standard GB 2762-2012, China). Most of the As and Cd taken up by cucumbers accumulated in the leaves and fruit, whereas Cr was found primarily in the roots, and most Ni, Cu, and Zn was detected in the fruit. Importantly, only small proportions of the potentially toxic elements in biochar were taken up by cucumber plants (As: 0.0075%; Cd: 0.038%; Ni: 0.0064%; Cu: 0.0016%; and Zn: 0.0015%). Given that the As, Cd, Ni, and Zn speciation in sewage sludge biochar was effectively immobilized after cultivation, the findings of this study indicate that sewage sludge biochar is a suitable substrate amendment in terms of the risk posed by potentially toxic elements.

Inorganic flocculant for sludge treatment: Characterization, sludge properties, interaction mechanisms and heavy metals variations

As an industrial waste, phosphogypsum was modified to produce flocculant for sludge dewatering. In this paper, characteristics of flocculant, properties of treated sludge, and interactions of sludge and flocculant were investigated. Results suggested that after modification, flocculant showed a positive electrical property and a porous structure. Besides, larger sludge flocs formed in treated sludge showed a higher settleability and filterability. Flocculant could narrow sludge colloid network by compressing its Electrical double-layer due to the presence of CaSO₄. With potential change, the electronegative colloidal network cracked quickly and released sludge particles, active groups, unstable heavy metals and 82.91% of bound water. Moreover, porous adsorption between sludge particles and flocculant was found under molecular electrostatic potential and Van Der Waals force caused by flocculant addition. After modification, shear modulus of CaSO₄, SiO₂ and Al₂O₃ in modified phosphogypsum increased by 21%, 23% and 17%, respectively. This provided a strong skeleton support for sludge particles, which is significant to sludge dewatering. Particularly, through chelation, adsorption and rolling-sweeping process, risk level of unstable heavy metals excepting Cu in sludge filter cake was largely weakened. Immobilized rate of risky heavy metals was 23.96% (Cd_F1/F2), 39.92% (Cr_F1), 11.11% (Pb_F1/F2), 21.21% (Zn_F1), 35.49% (Ni_F1/F2), and 78.61% (As_F1/F2), respectively. Therefore, this study provided significant insight for developing efficient method to promote bound water removal from sludge, and to stabilize risky heavy metals in sludge.

The experimental optimization and comprehensive environmental risk assessment of heavy metals during the enhancement of sewage sludge dewaterability with ethanol and Fe(Ⅲ)-rice husk

The optimal concentrations of ethanol, Fe³⁺ and rice husk (RH) to enhance sludge dewaterability were determined by response surface methodology (RSM). Results showed the optimal concentrations of ethanol, Fe³⁺ and RH were 22.2 g/g DS, 239.9 mg/g DS and 348.9 mg/g DS, respectively, and the CST reduction efficiency reached 72.3%. The transformation behavior and mechanism of the heavy metals (HMs) during conditioning process were determined in terms of total HMs content, leaching tests, and fraction distribution. The environmental risk of HMs was quantitatively evaluated after conditioning in terms of bioavailability and ecotoxicity, potential ecological risks, and pollution levels. Results showed that the high ecological risk of HMs in raw sludge cake is primarily dominated by Cd and the use of Fe³⁺ alone negatively affected the immobilization of HMs and reduction of leaching toxicity. However, after repeated conditioning with Fe³⁺ and ethanol, the total HMs content reduction values in sludge cake were 75%, 93%, 100%, 91%, and 74% for Pb, Cr, Cd, Zn, and Cu, respectively. The potential ecological risk index (PERI) and geoaccumulation indicated low or no overall environmental risk after repeated conditioning. Particularly, the risk of Cd was reduced from high risk to low risk after repeated conditioning according to the PERI. Ethanol/Fe³⁺-RH can effectively reduce HMs risk from the sludge cake in the dewatering tests.

Combustion Characteristics of Hydrochar and Pyrochar Derived from Digested Sewage Sludge

In this paper, hydrochars and pyrochars were produced at 260 °C under different residence times (2 and 4 h) using anaerobic digested sewage sludge (SSL) as initial feedstock. The effect of reaction time on the fuel properties of hydrochars and pyrochars was evaluated. Moreover, the combustion kinetics of raw SSL and the derived pyrochars and hydrochars without coal blending were determined at two different air flows (20 and 90 mL/min) and compared. In the same conditions, the yield of hydrochar was significantly lower than that of pyrochar, confirming the different reaction pathways followed in each process. The results showed hydrochars have lower carbon recovery and energy yield than pyrochars, making the latter more suitable for energy purposes. The thermogravimetric combustion study showed that both thermochemical treatments increased the ignition temperature but decreased the burnout temperature, which results in higher stability during handling and storage. However, raw SSL is better for combustion than hydrochar according to the combustibility index. In addition, the kinetic study showed that the activation energy of the combustion of biochars, especially pyrochar, is lower than that of raw SSL, which is advantageous for their combustion.

Passivation of lead and cadmium and increase of the nutrient content during sewage sludge composting by phosphate amendments

As an efficient and cost-effective biological treatment method for sewage sludge, composting has been widely used worldwide. To passivate heavy metals and enhance the nutrient content in compost, in the present study, phosphate rock, calcium magnesium phosphate, and monopotassium phosphate were added to the composting substrate. According to the Community Bureau of Reference sequential extraction procedure, phosphate rock and monopotassium phosphate amendments exhibit a good passivation effect on Cd and Pb. The X-ray diffraction patterns proved the formation of Pb₃(PO₄)₂ and Cd₅(PO₄)₂SiO₄ crystals, and X-ray absorption near-edge structure spectroscopy illustrated the change in P speciation after phosphate amendment. Furthermore, phosphate amendment increased the contents of total P and available P, and it reduced the loss of N during sewage sludge composting. The germination index showed that the target phosphate amendments in sewage sludge compost had no negative effects on seed germination, and this method has great potential to be used as a soil amendment.

Removal of heavy metals in sludge via joint EDTA-acid treatment: Effects on seed germination

Heavy metals (Cu, Pb, Zn, Ni, Cr, and Cd) were removed from sludge via joint treatment with ethylene diamine tetraacetic acid (EDTA) and three organic acids (citric acid, glutamic acid, or aspartic acid) at optimal EDTA-acid concentration ratios of 1:1, 1:2 and 2:1, respectively. Heavy metal removal rates and post-treatment nutrient retention in sludge was then analyzed. The effects of different proportions sludge and soil mixes on the germination of Chinese white cabbage (Brassica campestris L. ssp. Chinensis Makino) seeds was then studied, and the mechanism by which nutrient content in the soil/sludge mixture affects seed germination was explored. The results indicated that the removal rate of the heavy metals decreased in the order of Zn > Ni > Cd > Pb > Cu > Cr, when EDTA was used in conjunction with citric acid and glutamic acid. In contrast, when EDTA was combined with aspartic acid, the removal rate of the heavy metals decreased in the order of Ni > Zn > Cd > Cu > Pb > Cr. Regarding the effect of heavy metal removal and sludge nutrient retention, EDTA-citric acid and EDTA-aspartic acid treatment had optimum results at a 1:1 ratio, while EDTA-glutamic acid treatment was optimum at a 1:2 ratio. At an optimum sludge to soil ratio of 1:4, the germination and root elongation inhibition rate of Chinese white cabbage seeds could be promoted, and the sludge could meet standard agricultural requirements. SPSS correlation analysis demonstrated that the seed germination index and nutrient content in sludge/soil mixtures were significantly correlated, demonstrating the feasibility of sludge for agricultural purposes.

Sequential extraction for heavy metal distribution of bottom ash from fluidized bed co-combusted phosphorus-rich sludge under the agglomeration/defluidization process

Agglomeration that occurs during municipal sewage sludge (MSS) fluidized bed co-combustion might affect heavy metal distribution and the transformation of bottom ash. A study on the mobility and speciation of heavy metals that accompanies agglomeration behavior and phosphorus addition should be examined during MSS co-combustion. Meanwhile, the aim of this study was to evaluate the total content and speciation of heavy metals during the MSS fluidized bed co-combustion by the chemical sequential extraction procedure (SEP). The risk assessment code (RAC) and individual contamination factor (ICF) are calculated to evaluate the mobility of heavy metals and their environmental risks in agglomerates. Moreover, identification of agglomerates is established by both characterization (scanning electron microscopy/energy-dispersive spectroscopy, X-ray photoelectron spectroscopy) and thermodynamic simulation (HSC chemistry software). The experimental results indicated that P and Na would form the lower melting-point compounds such as NaPO₃ and Na₂O in the bottom ash, which promoted agglomeration during MSS fluidized bed co-combustion. According to the simulation, Na and P have a stronger affinity than Si and Cr, and this reaction is not only influenced by particle agglomeration, but also by heavy metal distribution during modified MSS co-combustion. Nevertheless, the results of ICFs and RACs obtained from the SEP indicated that for heavy metals trapped in agglomerates, a weaker binding such as physical covering by eutectics might be considered as the dominant reaction compared with chemical binding to form a metal complex.

Preservation of nitrogen and sulfur and passivation of heavy metals during sewage sludge composting with KH2PO4 and FeSO4

Composting is an effective method for treating sewage sludge. The aim of this work was to study preservation of nitrogen and sulfur and passivation of heavy metals during sewage sludge composting with KH₂PO₄ and FeSO₄. The results show the loss rate of N decreased by 27.5% while that of S was increased by 32.1% compared with the control treatment during composting when KH₂PO₄ and FeSO₄ were added. X-ray absorption near-edge structure spectra show that S was converted to a highly oxidizable state during sewage sludge composting with added KH₂PO₄. The mobility factors of Cu, Zn, and Pb after composting were found to decrease by 13.6%, 21.6%, and 3.8%, respectively, compared with those before composting when KH₂PO₄ was added. Adding these two materials to Cu and Zn inhibits Zn₃(PO₄)₂(H₂O)₄ and Cu₅(PO₄)₂(OH)₄ from transforming into more mobile forms, while adding these materials to Pb promotes Pb₃(PO₄)₂ formation.

Energy and Nutrient Recovery from Sewage Sludge and Manure via Anaerobic Digestion with Hydrothermal Pretreatment

Global expectation for sustainability has prompted the transition of practices in wastewater treatment plants toward not only waste management but also energy and nutrient recovery. It has been shown that low-temperature hydrotherm (HT) treatment can enhance downstream biogas production via anaerobic digestion (AD). Yet, because the application of combined HT and AD is still at an early stage, a systematic understanding of the dynamic speciation evolution of important elements is still lacking. This study investigates energy and nutrient recovery from sewage sludge and swine manure via combined HT-AD treatment. Bench-scale investigation was conducted to evaluate biogas production and understand the dynamic evolution of organic carbon (C) and phosphorus (P) speciation. C and P speciations were characterized using complementary chemical and spectroscopic techniques, including ¹³C nuclear magnetic resonance (NMR) spectroscopy, P X-ray absorption near edge structure (XANES) spectroscopy, and sequential chemical extraction. Results from this study suggest that low-temperature HT pretreatment can achieve enhanced biogas production for sludge compared to the minimal effect on the biogas production from manure. It also provides guidance for P recovery from liquid digestate and solid residue after the AD process.

Transformation of heavy metals and dewaterability of waste activated sludge during the conditioning by Fe2+-activated peroxymonosulfate oxidation combined with rice straw biochar as skeleton builder

This work investigated the improvement performances and mechanisms of waste activated sludge (WAS) dewaterability and the transformation behavior of heavy metals (HMs, including Cu, Zn, Pb, Cd and Cr) by jointly conditioning of Fe²⁺-activated peroxymonosulfate (PMS) oxidation and rice straw biochar (RS-BC). Experimental results showed that at original WAS pH of 6.5, the joint conditioning was the most effective when PMS dosage was 0.6 mmol·(g-volatile solids (VS))^-1, Fe²⁺/PMS molar ratio was 0.6 and RS-BC dosage was 120 mg·(g-VS)^-1. Under this condition, the lowest moisture content (MC) was 38.5% and the standardized-capillary suction time (SCST) was as high as 8.74. For the improvement mechanism, Fe²⁺-activated PMS oxidation can significantly disintegrate the extracellular polymeric substances (EPS) composing WAS to release EPS-bound water, and the RS-BC was helpful to form porous structures to improve WAS compressibility, facilitating the subsequent dewatering. In addition, Fe²⁺-activated PMS oxidation can obviously improve the solubilization and reduce the leaching toxicity of Cu, Zn, Pb, Cd and Cr, which was further enhanced by RS-BC. Therefore, the joint application of Fe²⁺-activated PMS oxidation and RS-BC can be a feasible way to improve WAS dewaterability and reduce HMs risk during WAS dewatering.

Biochar facilitated bioprocessing and biorefinery for productions of biofuel and chemicals: A review

Biochar is traditionally used to improve soil properties in arable land and as adsorbent or precursor of activated carbon in wastewater treatment. Recent advances have shown biochar potentials in enhancing productions of biofuels and chemicals such as bio-ethanol, butanol, methane, hydrogen, bio-diesel, hydrocarbons and carboxylic acids. The properties of biochar such as high levels of porosity, functional groups, cation exchange capacity, pH buffering capacity, electron conductivity, and macro-/micro- nutrients (Na, K, Ca, Mg, P, S, Fe, etc.) provide appropriate conditions to relieve physicochemical stresses on microorganisms through pH buffering, detoxification, nutrients supply, serving as electron carrier and supportive microbial habitats. This paper critically reviewed biochar production and characteristics, biochar utilization in anaerobic digestion, composting, microbial fermentation, hydrolysate detoxification, catalysis in biomass refinery and biodiesel synthesis. This review provides novel vision of biochar application, which could guide future research towards cleaner and more economic production of renewable fuels and bio-based chemicals.

New insight into the impact of biochar during vermi-stabilization of divergent biowastes: Literature synthesis and research pursuits

Biochar amendment for compost stabilization of divergent biowastes is gaining considerable attention due to environmental, agronomic and economic benefits. Research to date exhibits its favorable physico-chemical characteristics, viz. greater porosity, surface area, amount of functional groups, and cation exchange capacity (CEC), which allow interface with main nutrient cycles, favor microbial activities during composting, and improve the reproduction of earthworms during vermicomposting. Biochar amendment during composting and vermicomposting of biowastes boosts physico-chemical properties of compost mixture, microbial activities and organic matter degradation; and reduces nitrogen loss and emission of greenhouse gases (GHGs). It also improves the quality of final compost by increasing concentration of plant available nutrients, enhancing maturity, decreasing composting duration and reducing the toxicity of compost. Due to these characteristics, biochar could be considered a beneficial additive for the stabilization of different biowastes during composting and vermicomposting processes. Hence, good quality vermicompost, efficient recycling and management of biowastes could be achieved by addition of biochar through composting and vermicomposting.

Pollution intensity-dependent metal accumulation in ground beetles: a meta-analysis

Survival of organisms in polluted habitats is a key factor regarding their long-term population persistence. To avoid harmful physiological effects of pollutants' accumulation in organisms, decontamination and excretion could be effective mechanisms. Among invertebrates, ground beetles are reliable indicators of environmental pollution. Published results, however, are inconsistent, as some studies showed effective decontamination and excretion of pollutants, while others demonstrated severe toxic symptoms due to extreme accumulation. Using ground beetles as model organisms, we tested our pollution intensity-dependent disposal hypothesis for five pollutants (Cd, Cu, Mn, Pb, and Zn) among four soil pollution intensity levels (low, moderate, high, and extreme) by categorical meta-analysis on published data. According to our hypothesis, decontamination and excretion of pollutants in ground beetles are effective in lowly or moderately polluted habitats, while disposal is ineffective in highly or extremely polluted ones, contributing to intense accumulation of pollutants in ground beetles. In accordance with the hypothesis, we found that in an extremely polluted habitat, accumulation of Cd and Pb in ground beetles was significantly higher than in lowly polluted ones. These findings may suggest the entomoremediation potential of ground beetles in an extremely polluted environment.

Eisenia fetida and biochar synergistically alleviate the heavy metals content during valorization of biosolids via enhancing vermicompost quality

Impact of different biochars supplemented (10% w/w) to promote vermicomposting of sewage sludge (SS) and kitchen waste (KW) mixture (SS + KW, 70:30) was studied on the growth, reproduction and survival of earthworms, and ultimately the quality of vermicompost. Four types of biochar used as secondary material for preincubation (16 days) and vermicomposting (30 days) were: pine tree biochar (PTB), poplar plant biochar (PPB), wetland plant biochar (WPB) and yard waste biochar (YWB). Preincubation and vermicomposting of biomass mixture were undertaken in 60 L and 2 L capacity round-shaped bioreactors, respectively. Samples of biomass undergoing degradation were drawn after every 2 days during preincubation and with 5 days interval during vermicomposting to analyze them for plant nutrients and heavy metals contents. Amendment of vermicompost substrate (SS + KW) with biochars; PTB, PPB, WPB and YWB increased the reproduction rate of earthworms (Eisenia fetida) by 44.6, 53.9, 29.3 and 38.8%, respectively as compared to control (no biochar, NB). There has been significant reduction in total content of Cd (0.2-5.1%), Cr (7.3-10.8%), Cu (3.1-7.4%), Mn (3.2-8.4%), Pb (9.0-45.9%) and Zn (1.1-5.7%) by the application of different biochars as compared to NB after vermicomposting. The SEM/EDS images also reflected reduced concentration of these heavy metals in the final vermicompost as compared to initial mixtures. Progressively, biochar amendments increased the concentration of all macronutrients, viz., TN (15.8-31.0%), TP (8.6-9.9%), TK (2.8-17.3%), Ca (4.1-9.9%) and Mg (0.8-12.2%); while, reduced the pH (1.9-2.3%), content of Na (6.6-22.3%), TOC (6.6-15.4%), OM (5.0-8.2%) and C:N ratio (2.6-18.9%). Earthworm body accumulation factor (BAF) of heavy metals was: Cd > Zn > Pb > Cu > Mn > Cr at the termination stage of experiment. In conclusion, amending the SS + KW mixture with 10% (w/w) PPB for vermicomposting rendered higher count of cocoons, growth rate and reproduction rate of earthworms, which ultimately produce nutrients-rich vermicompost lower in heavy metals.

The release mechanism of heavy metals from lab-scale vertical flow constructed wetlands treating road runoff

Constructed wetlands (CWs) have been applied to remediate heavy metal pollution effectively in practice. However, the heavy metal release from CWs has not been paid enough attention. In this study, a 5-month experiment was carried out with three parallel lab-scale vertical flow constructed wetlands (VFCWs) with zeolites as fillers. The artificial rainwater was pumped into VFCWs to study the release characteristic and mechanisms of heavy metals (Cu, Zn, Cr, and Pb). The results showed that significant amounts of Zn and Cu were released from the VFCWs at the end of the experiment while Pb and Cr rarely escaped. The upper layer (0-30 cm) of the VFCWs was the most effective area for heavy metal removal due to the presence of sediments, but it was also the most active area for heavy metal release. To explain this result, the sediments were analyzed before and after being leached by the tap water. The results indicated that Zn and Cu existed mainly in the exchangeable state, and they had strong leachability and bioavailability, causing its releases. Also, competitive adsorption of different metals meant that the metal ions with strong adsorption to zeolite caused the metal ions with weak adsorption to be desorbed from zeolites, and thus, a large amount of Zn escaped from VFCWs. The escape of heavy metals from CWs illustrated that it should be paid more attention in the management.

The influence of selected factors on leaching of metals from sewage sludge

In Poland, the amount of municipal sewage sludge that contains both organic and inorganic pollutants increases steadily. As a result of penetration of atmospheric precipitations through sludge layers, products of biochemical decomposition of organic matter and soluble mineral compounds are washed away and form contaminated leachates (Arain, J. Hazard. Mater. 154:998-1006, 2008; Fang, J. Hazard. Mater. 310:1-10, 2016; Ignatowicz, Environ. Res. 156:19-22, 2017). Metals contained in these leachates may be particularly burdensome and dangerous, which is due to the toxic nature that disturbs the natural biological balance (Fytili and Zabaniotou, Renew. Sust. Energy Rev. 12 (1): 116-140, 2008). In order to check bio-availability of metals in sewage sludge and find out resulting risks to the environment and human health, apart from the determination of total metal content, speciation analysis is often used. It makes possible a quantitative determination of various chemical forms of metals which are bound in the sewage sludge and finding which of them poses the greatest threat to the environment (Amir, Chemosphere 59:801-810, 2005; Ciba, Waste Manage. 23:897-905, 2003; Hei, Procedia Environ Sci 31:232-240, 2016; Liu, Chemosphere 67(5):1025-1032, 2007).The degree of immobilization of selected metals in sewage sludge has been determined using one of the sequential extraction methods designed to identify groups of compounds with which the metal is bound. Such a method is the Tessier procedure (Janas, Pol J Environ Stud 26(5A):37-41, 2017). Results of this research were used to assess the threat resulting from the increase in the amount of sewage sludge; the management of which is subject to constant restrictions (storage of sewage sludge has been prohibited since January 1, 2016).As a result of the conducted research, it was found that metals in sewage sludge, which undergo various transformations, are very difficult to immobilize. The addition of calcium oxide and an agent supporting the composting process to the sludge does not affect radically the increase of leaching of the analyzed elements from the sludge. Graphical abstract The schema of proceedings in leaching of heavy metals from sewage sludge after various modifications.

Enhancing sludge dewatering and heavy metal removal by bioleaching with Na2S2O3 as substrates

Bioleaching has been demonstrated to be an effective technology for the removal of heavy metals and sludge dewaterability. Since bacteria gain nutrients by diffusion of soluble compounds, the insolubility of elemental sulfur may slow the growth of bacteria. Thus, it is very important to find an energy substance quickly become available to Acidithiobacillus thiooxidans. This paper studies the improvement of sludge dewaterability and heavy metal removal with sodium thiosulfate as the source of energy for Acidithiobacillus thiooxidans. Through orthogonal experiments with specific resistance to filtration (SRF) as the target index, four factors (FeSO₄ dosage, Na₂S₂O₃ dosage, sludge reflux ratio and sludge moisture content) were identified to be the important influencing parameters. The optimal conditions were: FeSO₄ dosage, 8 g/L; Na₂S₂O₃ dosage, 1.5 g/L; sludge reflux ratio, 30%; sludge moisture content, 97%. Results indicated that the SRF of the sludge decreased from 9.89 × 10¹² to 1.03 × 10¹¹ m/kg. The removal efficiencies of heavy metals Cu, Zn, Pb and Cr could reach 83%, 78%, 31% and 38% within 3 days, respectively. These results confirm the potential of sodium thiosulfate as an alternative energy substance in bioleaching to improve sludge dewaterability as well as removal of metals.

Earthworms, Rice Straw, and Plant Interactions Change the Organic Connections in Soil and Promote the Decontamination of Cadmium in Soil

The joint effects of earthworms and crop straw on toxic metal speciation are not clear, and very limited information is available regarding the effects of their interaction on Cd mobility in Cd contaminated soil or in remediation processes involving plants. This study evaluated their impacts on Cd mobile form changes in soil and their effects on Cd uptake by plants. Treatments included both planted and unplanted-Cd-contaminated soil with or without rice straw and/or earthworms. The results revealed that earthworms, rice straw, and plant interactions change the Cd mobile forms in soil. The order of Cd concentration of different chemical forms was as follows: exchangeable > residual > bound to Fe-Mn oxide > bound to organic matter for earthworms, and exchangeable > bound to organic matter > residual > bound to Fe-Mn oxide for rice straw treatment, with a recovery rate of 96 ± 3%. The accumulation of Cd in plants increased in the presence of earthworms and decreased in the presence of rice straw. FT-IR spectra indicated that the degradation of rice straw increases C⁻O, C⁻O⁻H, C⁻H, and O⁻H functional groups which could complex with Cd ions. These findings highlighted that earthworms' activities and crop straw can modify soil properties and structure and promote the remediation of heavy metal. This study suggests that the ecological context of remediation instead of being limiting on soil-earthworms-plant interaction, should integrate the natural resources forsaken which can provide a positive influence on both plant health and the remediation of heavy metal in contaminated soil.

Phenanthrene Mitigates Cadmium Toxicity in Earthworms Eisenia fetida (Epigeic Specie) and Aporrectodea caliginosa (Endogeic Specie) in Soil

In classical toxicology studies, the interaction of combined doses of chemicals with dissimilar modes of toxic action in soil is complex and depending on the end point investigated and the experimental protocol employed. This study was used to examine the interactive effect of phenanthrene and Cadmium on two ecologically different species of earthworms; Eisenia. fetida and Aporrectodea. caliginosa. This interactive effect was scrutinized by using the acute toxicity test with the concentrations of 2.51 mg kg⁻¹ and 3.74 mg kg⁻¹, respectively, being lethal for 50% of E. fetida and A. caliginosa. The results showed that in the mixture treatment, phenanthrene at 5, 10, 15 and 20 mg kg⁻¹ significantly mitigated both earthworms species mortality and body-mass loss. Moreover, the factor of Cd accumulated in E. fetida and A. caliginosa tissues was significantly decreased by about 12% and 16%, respectively. Linear regression correlation coefficient revealed that the reduction of both earthworm species mortality was negatively and significantly correlated (r² = 0.98 ± 0.40 and 1 ± 3.9 p < 0.001) with phenanthrene concentration in soil. However, over 20 mg kg⁻¹ of phenanthrene, both organisms mortality rate increased again, as was the Bioaccumulation factor of phenanthrene. Thus, this study proposes that the antagonistical effect of phenanthrene on Cd at a degree of concentration can be used to mitigate Cd effect on soil living organisms. However, as an implication of these results, the interpretation of standardized toxicity bioassays, including whole effluent toxicity tests and single-compound toxicity tests, should be performed with caution. In addition, risk assessment protocols for environment pollution by a mixture of metals and polycyclic aromatic hydrocarbons should include robust methods that can detect possible interactive effects between contaminants to optimize environmental protection.

Evaluation of compost, vegetable and food waste as amendments to improve the composting of NaOH/NaClO-contaminated poultry manure

Regular usage of NaOH/NaClO disinfectants results in high sodium salt and alkalinity of poultry manure. This study compared three amendments: vegetable waste (V), food waste (F) and mature compost (C) for their ability to improve the composting of NaOH/NaClO-contaminated poultry manure. C compost resulted in the highest compost temperatures (p<0.001) and greatest reduction in OM, TC, TN and NH₄-N (p<0.05). C and V composts were more efficient at lowering extractable-Na (ext-Na) and electrical conductivity (EC) than F (p<0.05). Maturity was primarily indicated by NH₄-N, EC and ext-Na. Bacterial dynamics was profoundly influenced by NH₄-N, EC and TC, with the decrease leading to discriminate genera shift from Sinibacillus and Thiopseudomonas to Brevbacterium, Brachybacterium, and Microbacterium. These findings suggest that mature compost was more desirable amendment than vegetable and food waste in the composting of NaOH/NaClO-contaminated poultry manure, and the decrease of ext-Na indicated compost maturity but did not influence bacterial dynamics.

The transformation behaviors of heavy metals and dewaterability of sewage sludge during the dual conditioning with Fe2+-sodium persulfate oxidation and rice husk

This study focused on the behavior of heavy metals (HMs) in sewage sludge after conditioning based on total HMs concentration, fractionation and leaching tests. Fe²⁺-sodium persulfate (SPS) oxidation was applied as chemical conditioner and rice husk (RH) was added as a physical conditioner to improve the dewaterability of sewage sludge. Combined the response surface methodology analysis and our previous research, the capillary suction time (CST) and the water content of sludge cake reduced by 93.8% and 25%, respectively, after conditioned by 125 mg g^-1 dry solid (DS) SPS, 33 mg g^-1 DS Fe²⁺, 333 mg g^-1 DS RH at original pH of sludge. The HMs analysis indicated that the concentrations of Cu, Pb, Cd, Zn and Cr were increased in liquid phase after conditioning process. And after conditioned by Fe²⁺/SPS with RH, the leaching toxicity reduction are 79%, 100%, 93%, 80% and 68% for Cu, Pb, Cd, Zn and Cr, respectively. Results showed that RH combined with Fe²⁺/SPS oxidation has a synergistic effect on risk reduction and immobilization of HMs. The chemical species of HMs were redistributed and the risk of Pb was reduced from medium risk to no risk after sludge conditioning process according to the risk assessment.

Changes in the fractionation profile of Al, Ni, and Mo during bioleaching of spent hydroprocessing catalysts with Acidithiobacillus ferrooxidans

Spent hydroprocessing catalysts are known to contain a variety of potentially toxic metals and therefore studies on the bioavailability and mobility of these metals are critical for understanding the possible environmental risks of the spent catalysts. This study evaluates the different chemical fractions/forms of aluminium (Al), nickel (Ni), and molybdenum (Mo) in spent hydroprocessing catalyst and the changes they undergo during bioleaching with Acidithiobacillus ferrooxidans. In the spent catalyst (prior to bioleaching), Al was primarily present in its residual form, suggesting its low environmental mobility. However, Ni comprised mainly an exchangeable fraction, indicating its high environmental mobility. Molybdenum was mainly in the oxidizable form (47.1%), which indicated that highly oxidizing conditions were required to liberate it from the spent catalyst. During bioleaching the exchangeable, reducible and oxidizable fractions of all the metals were leached, whereas the residual fractions remained largely unaffected. At the end of bioleaching process, the metals remaining in the bioleached sample were predominantly in the residual fraction (98.3-99.5%). The 'risk assessment code' (RAC) and I_R analysis also demonstrated that the environmental risks of the bioleached residue were significantly lower compared to the untreated spent catalyst. The results of this study suggest that bioleaching is an effective method in removing the metals from spent catalysts and the bioleached residue poses little environmental risk.

Methane fermentation as a possibility of utilization and energy – efficient management of sewage sludge

Sewage sludge contains organic and biogenic substances that should be used. These materials may also contain toxic substances and heavy metals, and therefore require proper management in accordance with applicable law. Sewage sludge disposal is important for the protection of the environment, but also for the costs associated with the disposal of sludge. There are many technologies that are designed to use the properties of sewage sludge. It should be emphasized, however, that the proposed sewage sludge management technologies require investment outlays. In the present situation, research experiments have been carried out in the Environmental Technology Laboratory of the University of Environmental and Life Sciences in Poznan, indicating the possibility of efficient use of sewage sludge in the methane fermentation process. The use of sewage sludge in the fermentation mix allows the fertilizer to be obtained in the form of fermentation pulp, which also has the same properties as natural fertilizers. It should also be noted that the effect of physicochemical changes is the production of biogas, which is the source of electricity and/or heat. The economic sustainability of the use of sludge (taking into account the current costs of their disposal) is unequivocally positive when co-fermented in an appropriate proportion. The results show that sewage sludge can be successfully used in biogas plants as a co-substrate of fermentation mix. Therefore, the use of sewage sludge in biogas plants not only allows for the safe management and production of fertilizers, but also for the "green" energy.

The influence of organic-binding metals on the biogas conversion of sewage sludge

The anaerobic conversion of sewage sludge to methane-rich biogas is an important bioenergy strategy that has been hindered by low conversion efficiency. The poorly understood mechanism of the influence of the key structural component in sludge is responsible for this. The influence of organic-binding metals (OBM), which account for a substantial proportion of metals in sludge, on biogas conversion of both sewage sludge and model sludge were explored in this study. It is observed that the net cumulative methane production of sludge decreased by 23% with the increase of OBM content, implying the crucial role of the OBM in anaerobic sludge digestion. Experimental results showed that the apparent activation energy of sludge organic solubilisation and the median particle size of sludge particulates increased with increasing OBM content, whereas the surface binding sites for enzymes decreased, indicating that the stability of the sludge floc was reinforced by the effect of OBM. Further analyses of the sludge structure revealed that a high OBM content (>2.5% total solids in the present study) compacted the sludge organic matter, restricted the molecular mobility and deteriorated the depolymerisation of the biopolymers by bridging and hydrogen-bonding interactions. This suggests that as a result of the effect of OBM, the hydrolysis and acidification of sludge particulate could be inhibited, resulting in poor biogas conversion. Moreover, it was further authenticated by the results from biochemical methane potential assay process. These findings can deepen the understanding of the role of OBM in sludge for biogas conversion and are important for the improvement of anaerobic sludge digestion.

Biochar for composting improvement and contaminants reduction. A review

Biochar is characterised by a large specific surface area, porosity, and a large amount of functional groups. All of those features cause that biochar can be a potentially good material in the optimisation of the process of composting and final compost quality. The objective of this study was to compile the current knowledge on the possibility of biochar application in the process of composting and on the effect of biochar on compost properties and on the content of contaminants in compost. The paper presents the effect of biochar on compost maturity indices, composting temperature and moisture, and also on the content and bioavailability of nutrients and of organic and inorganic contaminants. In the paper note is also taken of the effect of biochar added to composted material on plants, microorganisms and soil invertebrates.