A review on percarbonate-based advanced oxidation processes for remediation of organic compounds in water

Percarbonate-periodate system: A novel and efficient "oxidant-oxidant" strategy for selective oxidation of micropollutants in water

The development of effective and selective oxidation technology in complex water matrices is crucial for water ecological security. This study reports for the first time the synergistic use of "oxidant-oxidant" about sodium percarbonate (SPC) and periodate (PI) to selectively degrade organic micropollutants. The SPC/PI system showed degradation rates of 0.0946-0.2978 min-1 for various pollutants, which was 3.7-1787 times higher than those in the PI alone and SPC alone systems and can achieve the effect of H2O2/PI systems. Additionally, SPC/PI was a safe water treatment technology without generating reactive iodine species (e.g., HOI). The slightly reduced removal rate of bisphenol F under different ionic species and strengths is indicative of the good anti-interference of the SPC/PI system. Scavenging, probe, and electron spin resonance experiments showed that ▪OH and CO3▪- played a major role in this process, rather than O2▪- and 1O2. Finally, the oxidized products and the possible transformation pathways of three different micropollutants in the SPC/PI and H2O2/PI systems were characterized and clarified, and the toxicity of the degradation products was predicted. Generally, the study proposed a new selective oxidation strategy of SPC/PI that can effectively eliminate micropollutants in water treatment and clarified the interaction mechanisms between PI and SPC.

Modified sono-Fenton process for oxidative degradation of chloramphenicol

Oxidative degradation of chloramphenicol (CAP) using a hybrid approach (US/HA+/n-Fe2O3/SPC) involving sodium percarbonate (SPC; "solid H2O2" carrier), Fe2O3 nanoparticles (n-Fe2O3; H2O2 decomposition catalyst), hydroxylamine in its protonated form (HA+; Fe (III) to Fe (II) reducer), and ultrasonic cavitation (to increase the generation of hydroxyl radicals) has been studied for the first time. The average size of n-Fe2O3 synthesized by the sonochemical method, as calculated according to the Debye-Scherrer equation, was ~ 18 nm. The maximum degradation degree of CAP (83.1%) and first-order oxidative degradation rate constant of CAP as 1.253 × 10-3 s-1 were achieved using the modified sono-Fenton process under the optimized conditions as the initial concentration of CAP - 50 mg/L, the molar ratio of CAP:HA+:n-Fe2O3:SPC of 1:100:100:100, pH as 3, the temperature as 318 K, the specific ultrasonic power as 53.3 W/L, and the treatment duration of 7200 s. In general, the efficiency and intensity of CAP degradation increased with a decrease in the pH value, an increase in the molar ratio of CAP:HA+:n-Fe2O3:SPC, a decrease in the initial concentration of CAP, an increase in temperature, and showed a minor change with the specific power of US. The synergistic coefficient for the combination of the US and the heterogeneous Fenton process was 17.9. The active participation of hydroxyl radicals in the oxidative degradation of CAP using the modified sono-Fenton process was confirmed by scavenging experiments performed using tert-butyl alcohol. The proposed process can be a promising direction in the remediation of pharmaceutical effluents with significant potential for commercial exploitation.

Enhancing microfiltration membrane performance by sodium percarbonate-based oxidation for hydraulic fracturing wastewater treatment

Low pressure membrane takes a great role in hydraulic fracturing wastewater (HFW), while membrane fouling is a critical issue for the stable operation of microfiltration (MF). This study focused on fouling mitigation by sodium percarbonate (SPC) oxidation, activated by ultraviolet (UV) and ferrous ion (Fe(II)). The higher the concentration of oxidizer, the better the anti-fouling performance of MF membrane. Unlike severe MF fouling without oxidation (17.26 L/(m2·h)), UV/SPC and Fe(II)/SPC under optimized dosage improved the final flux to 740 and 1553 L/(m2·h), respectively, and the latter generated Fe(III) which acted as a coagulant. Fe(II)/SPC oxidation enabled a shift in fouling mechanism from complete blocking to cake filtration, while UV/SPC oxidation changed it to standard blockage. UV/SPC oxidation was stronger than Fe(II)/SPC oxidation in removing UV254 and fluorescent organics for higher oxidizing capacity, but the opposite was noted for DOC removal. The deposited foulants on membrane surface after oxidation decreased by at least 88% compared to untreated HFW. Correlation analysis showed that UV254, DOC and organic fraction were key parameters responsible for membrane fouling (correlation coefficient＞0.80), oxidizing capacity and turbidity after oxidation were also important parameters. These results provide new insights for fouling control during the HFW treatment.

A systematic review on percarbonate-based advanced oxidation processes in wastewater remediation: From theoretical understandings to practical applications

Percarbonate encompasses sodium percarbonate (SPC) and composite in-situ generated peroxymonocarbonate (PMC). SPC emerges as a promising alternative to hydrogen peroxide (H2O2), hailed for its superior transportation safety, stability, cost-effectiveness, and eco-friendliness, thereby becoming a staple in advanced oxidation processes for mitigating water pollution. Yet, scholarly literature scarcely explores the deployment of percarbonate-AOPs in eradicating organic contaminants from aquatic systems. Consequently, this review endeavors to demystify the formation mechanisms and challenges associated with reactive oxygen species (ROS) in percarbonate-AOPs, alongside highlighting directions for future inquiry and development. The genesis of ROS encompasses the in situ chemical oxidation of activated SPC (including iron-based activation, discharge plasma, ozone activation, photon activation, and metal-free materials activation) and composite in situ chemical oxidation via PMC (namely, H2O2/NaHCO3/Na2CO3, peroxymonosulfate/NaHCO3/Na2CO3 systems). Moreover, the ROS generated by percarbonate-AOPs, such as •OH, O2•-, CO3•-, HO2•-, 1O2, and HCO4-, can work individually or synergistically to disintegrate target pollutants. Concurrently, this review systematically addresses conceivable obstacles posing percarbonate-AOPs in real-world application from the angle of environmental conditions (pH, temperature, coexisting substances), and potential ecological toxicity. Considering the outlined challenges and advantages, we posit future research directions to amplify the applicability and efficacy of percarbonate-AOPs in tangible settings. It is anticipated that the insights provided in this review will catalyze the progression of percarbonate-AOPs in water purification endeavors and bridge the existing knowledge void.

Percarbonate mediated advanced oxidation of irbesartan: A suitable alternative to chlorination?

This study aims to investigate the environmental fate of irbesartan when subjected to activated percarbonate treatment. The investigation delves into the formation of disinfection byproducts (DBPs) and evaluates their toxicity, and it seeks to draw comparisons with outcomes from treatment with sodium hypochlorite, already characterized in previous findings. The proposed treatment indicates the formation of at least 11 DBPs - eight identified for the first time - which have been isolated by various chromatographic techniques, identified by Nuclear Magnetic Resonance and Mass Spectrometry studies and for which a mechanism has been proposed to elucidate their formation. To evaluate irbesartan's biological impact during treatment with sodium percarbonate (SPC), a toxicity study of the DBPs was conducted using Daphnia magna, Aliivibrio fischeri, and Raphidocelis subcapitata, three model organisms. The ecotoxicity was evaluated using the Ecological Structure-Activity Relationships (ECOSAR) computer program and compared with experimental results. Compared to chlorination treatment, a lower mineralization percentage (-43 %) and amount of DBPs at least twice higher were observed. Toxicity assessment highlighted that DBPs formed during SPC treatment were more toxic than those from chlorination. ECOSAR predicted toxicity aligned with experimental findings. Additionally, the DBPs exhibited varying levels of toxicity, primarily attributable to the presence of aromatic and hydroxyl groups in their chemical structure, indicating that SPC treatment is not suitable for treatment of irbesartan polluted waters.

Removal enhancement of persistent basic fuchsin dye from wastewater using an eco-friendly, cost-effective Fenton process with sodium percarbonate and waste iron catalyst

In this comprehensive investigation, we evaluate the efficacy of the Fenton process in degrading basic fuchsin (BF), a resistant dye. Our primary focus is on the utilization of readily available, environmentally benign, and cost-effective reagents for the degradation process. Furthermore, we delve into various operational parameters, including the quantity of sodium percarbonate (SPC), pH levels, and the dimensions of waste iron bars, to optimize the treatment efficiency. In the course of our research, we employed an initial SPC concentration of 0.5 mM, a pH level of 3, a waste iron bar measuring 3.5 cm in length and 0.4 cm in diameter, and a processing time of 10 min. Our findings reveal the successful elimination of the BF dye, even when subjected to treatment with diverse salts and surfactants under elevated temperatures and acidic conditions (pH below 3). This underscores the robustness of the Fenton process in purifying wastewater contaminated with dye compounds. The outcomes of our study not only demonstrate the efficiency of the Fenton process but highlight its adaptability to address dye contamination challenges across various industries. Critically, this research pioneers the application of waste iron bars as a source of iron in the Fenton reaction, introducing a novel, sustainable approach that enhances the environmental and economic viability of the process. This innovative use of recycled materials as catalysts represents a significant advancement in sustainable chemical engineering practices.

Research Progress on the Degradation of Organic Pollutants in Wastewater via Ultrasound/Periodate Systems: A Review

In recent years, the efficient removal of organic pollutants from wastewater has emerged as a critical area of global research interest. Against this backdrop, an array of innovative technologies for wastewater treatment has been developed. Among numerous advanced oxidation processes (AOPs), periodate (PI), an emerging oxidizing agent in AOPs, has garnered significant attention from researchers. Particularly, the integration of ultrasound (US)-activated PI systems has been recognized as an exceptionally promising approach for the synergistic degradation of organic pollutants in wastewater. In this paper, we conducted a thorough analysis of the mechanisms underlying the degradation of organic pollutants using the US/PI system. Furthermore, we comprehensively delineated the effects of ultrasonic power, periodate concentration, temperature, pH, coexisting inorganic ions, and dissolved organic matter on the removal efficiency of organic pollutants and summarized application cases of the US/PI system for the degradation of different pollutants. Finally, we also offered prospective discussions on the future trajectories of US/PI technology development.

Advanced oxidation processes for water and wastewater treatment - Guidance for systematic future research

Advanced oxidation processes (AOPs) are a growing research field with a large variety of different process variants and materials being tested at laboratory scale. However, despite extensive research in recent years and decades, many variants have not been transitioned to pilot- and full-scale operation. One major concern are the inconsistent experimental approaches applied across different studies that impede identification, comparison, and upscaling of the most promising AOPs. The aim of this tutorial review is to streamline future studies on the development of new solutions and materials for advanced oxidation by providing guidance for comparable and scalable oxidation experiments. We discuss recent developments in catalytic, ozone-based, radiation-driven, and other AOPs, and outline future perspectives and research needs. Since standardized experimental procedures are not available for most AOPs, we propose basic rules and key parameters for lab-scale evaluation of new AOPs including selection of suitable probe compounds and scavengers for the measurement of (major) reactive species. A two-phase approach to assess new AOP concepts is proposed, consisting of (i) basic research and proof-of-concept (technology readiness levels (TRL) 1-3), followed by (ii) process development in the intended water matrix including a cost comparison with an established process, applying comparable and scalable parameters such as UV fluence or ozone consumption (TRL 3-5). Subsequent demonstration of the new process (TRL 6-7) is briefly discussed, too. Finally, we highlight important research tools for a thorough mechanistic process evaluation and risk assessment including screening for transformation products that should be based on chemical logic and combined with complementary tools (mass balance, chemical calculations).

Ferrate(VI)/percarbonate for the oxidation of micropollutants: Interactive activation and release of low-concentration hydrogen peroxide for efficient electron utilization

A novel "ferrate/percarbonate (Fe(VI)/SPC) co-oxidation process" was used to treat ciprofloxacin (CIP) and various micropollutants (MPs), which owned better performance than mixture of Fe(VI), Na2CO3 and H2O2. The mechanism investigation found that the low-concentration H2O2 (1-2 µM) released by SPC can promote the high-valent iron intermediates (Fe(IV)/Fe(V)) of Fe(VI) to the MP oxidation, and Fe(VI) products can also activate SPC to produce hydroxyl radical (·OH). The interactive activation of Fe(VI) and SPC was realized, which retained the high selectivity of Fe(VI) to electron-rich pollutants, and also made up the oxidation of electron-deficient pollutants through •OH, improving the degradation effect of various MPs by 20-30%, and the rate constant was increased by 1 to 3 times. Moreover, non-purgeable organic carbon (NPOC) determination confirmed that •OH participation reduced the NPOC value of CIP from 5.43 mg/L to 4.37 mg/L. The transformation pathway of CIP showed that Fe(VI)/SPC resulted in more hydroxylation intermediates of CIP than Fe(VI) alone. Acute toxicity assays found that the photoinhibition rate of CIP treated with Fe(VI) alone was 14.5%, while the sample treated with Fe(VI)/SPC showed no significant photoinhibition effect, which proved that the new process had good detoxification properties for CIP.

Removal of tetracycline by ultraviolet/sodium percarbonate (UV/SPC)advanced oxidation process in water

Tetracycline (TC) was widely used and frequently detected in various water bodies, where the presence of TC posed a significant threat to the health of aquatic organisms. Furthermore, antibiotics were hardly degraded by biological treatment. Thus, in order to enhance the removal of TC, we proposed the use of a novel ultraviolet/sodium percarbonate (UV/SPC) advanced oxidation process and initiated an in-depth study. The study investigated the influence of oxidant dosage, initial pH, UV intensity, and TC concentration on the removal of TC. The results demonstrated that the UV/SPC system efficiently removed TC, with removal efficiency increasing as the SPC concentration increased. Within the pH range of 3-11, TC degradation exhibited minimal variation, indicating the UV/SPC system's strong adaptability to pH variations. The research on the impact of the water matrix on TC removal revealed that HCO3- had an inhibitory effect on TC degradation, while NO3- promoted TC degradation. Additionally, the presence of free radical species (·OH, ·CO3-, ·O2-) were detected and rate constants for the secondary reactions (k·OH,TC = 6.3 × 109 L mol-1·s-1, k·CO3-,TC = 3.4 × 108 L mol-1·s-1) were calculated, indicating that ·OH exhibited a stronger oxidative performance compared to ·CO3-. This study did not only present a novel strategy via UV/SPC to remove TC but also uncovered the unique role of ·CO3- for contaminant removal.

Aging of polystyrene microplastics by UV/Sodium percarbonate oxidation: Organic release, mechanism, and disinfection by-product formation

The occurrence and transformation of microplastics (MPs) in environment has attracted considerable attention. However, the release characteristics of MP-derived dissolved organic matter (MP-DOM) under oxidation conditions and the effect of DOM on subsequent chlorination disinfection by-product (DBP) still lacks relevant information. This study focused on the conversion of polystyrene microplastics (PSMPs) in the advanced oxidation of ultraviolet-activated sodium percarbonate (UV/SPC-AOP) and the release characteristics of MP-DOM. The DBP formation potential of MP-DOM was also investigated. As a result, UV/SPC significantly enhanced the aging and fragmentation of PSMPs. Under UV irradiation, the fluorescence peak intensity and position of humus-like and protein-like components of MP-DOM were correlated with SPC concentration. The aging MP suspension was analyzed by gas chromatography-mass spectrometry (GC-MS), and various alkyl-cleavage and oxidation products were identified. Quenching experiments and electron paramagnetic resonance (EPR) detection confirmed that carbonate and hydroxyl radicals jointly dominated the conversion of PSMPs. The formation of DBP was related to the components of MP-DOM. Overall, these results help to understand the aging behavior of MPs in AOP. Moreover, MP-DOM released by MPs after AOP oxidation may be a precursor of DBPs, which deserved more attention.

Hydrodynamic cavitation-enhanced activation of sodium percarbonate for estrogen removal

The present paper investigated the potential of hydrodynamic cavitation (HC) as an effective tool for activating sodium percarbonate (SPC). The method's efficiency was demonstrated by effectively removing estrogens, which are pollutants that have adverse impacts on aquatic ecosystems. The effects of the SPC concentration, temperature of solution, and cavitation time were evaluated. After SPC/HC treatment, the removal of estrogens was monitored by liquid chromatography-tandem mass spectrometry (LC -MS/MS). Already after 4 s of treatment and 24 h of reaction time, more than 97% of estrogens (initial concentration of 300 ng/L) were removed. The effect of post-treatment time is not considered in several papers, even though it seems to be crucial and is discussed here. The results were supported by the values of degradation rate constants, which fit the pseudo-first-order kinetic model. We also verified that HC alone was not effective for estrogen removal under the selected conditions. The sustainability of the SPC/HC system was evaluated based on electric energy per order calculation. The combination of SPC and HC is a promising approach for rapidly degrading micropollutants such as estrogenic compounds without the need for additional technological steps, such as pH or temperature adjustment.

Insights into the effects of natural pyrite-activated sodium percarbonate on tetracycline removal from groundwater: Mechanism, pathways, and column studies

In-situ chemical oxidation based on sodium percarbonate (SPC) has received much attention for remediation of groundwater contaminated with organic pollutants due to the high efficiency, stable reaction, and sustainability of SPC. Currently, metal ions and their composite materials, are mainly employed for the activation of SPC. However, due to its narrow pH range, slow Fe3+/Fe2+ circulation, and generation of refractory sludge, its application in groundwater is limited. In this study, SPC was activated with natural pyrite (FeS2) to remove tetracycline, which was selected as the target pollutant. FeS2 exhibited excellent catalytic activity and stability towards the degradation of tetracycline. The tetracycline degradation efficiency of SPC/FeS2 system reached 70 % within 10 min, and nearly half of the tetracycline was degraded in the first 5 min of the reaction. The optimum SPC dosage for the tetracycline removal was 8 mM, with FeS2 dosage of 0.5 g/L. The tetracycline removal efficiency remained above 60 % after 4 cycles, indicating its good recycling efficiency of the system. SPC/FeS2 system was not significantly affected by the initial pH or the presence of Cl-, SO42-, NO3- while, HCO3-, Ca2+, Mg2+, and humid acid suppressed the reaction. The electron paramagnetic resonance spectroscopy and quenching experiments demonstrated that OH and O2- played a dominant role in tetracycline removal by the system. S22-, as an electron donor, was able to participate in the Fe3+/Fe2+ cycle. In addition, the 13 transformation products were determined by liquid chromatography-mass spectrometry predicted that the degradation pathway of tetracycline consisted of hydroxylation, demethylation, and decarbonylation reactions. Finally, the dynamic simulation experiments of SPC/FeS2 sand column showed that FeS2 effectively activated SPC and significantly reduced the toxicity in groundwater after the packed column treatment. This study reveals that FeS2 can efficiently activate SPC and has good prospects for tetracycline-contaminated groundwater remediation applications.

Regulating sludge composting with percarbonate facilitated the methylation and detoxification of arsenic mediated via reactive oxygen species

This study purposed to demonstrate the impact of reactive oxygen species (ROS) on arsenic detoxification mechanism in sludge composting with percarbonate. In this study, sodium percarbonate was used as an additive. Adding sodium percarbonate increased the content of H2O2 and OH, which the experimental group (SPC) was higher than the control group (CK). In addition, it decreased the bioavailability of arsenic by 19.10%. Metagenomic analysis found that Firmicutes and Pseudomonas took an active part in the overall compost as the dominant bacteria of arsenic methylation. ROS positively correlated with arsenic oxidation and methylation genes (arsC, arsM), with the gene copy number of arsC and arsM increasing to 7.74 × 1012, 5.24 × 1012 in SPC. In summary, the passivation of arsenic could be achieved by adding percarbonate, which promoted the methylation of arsenic, reduced the toxicity of arsenic, and provided a new idea for the harmless management of sludge.

Iron (II) phthalocyanine loaded tourmaline efficiently activates PMS to degrade pharmaceutical contaminants under solar light

Iron (II) phthalocyanine (FePc) is loaded on the surface of the tourmaline (TM) by the reflow method to obtain FePc/TM. This research effectively prevents the π-π stacking of FePc, increased the effective utilization rate of PMS activation under solar light, and further improved the catalytic performance of the catalytic system. The catalytic oxidation efficiency of FePc/TM on carbamazepine (CBZ) and sulfadiazine (SD) can reach 99% under solar light for 15 and 5 min, the total organic carbon (TOC) removal rate can reach 58% and 69% under solar light for 120 min. After 6 cycles, the CBZ removal rate remained above 95%. In addition, the FePc/TM catalytic system has an excellent removal rate for other pharmaceuticals. The results of spin-trapped electron paramagnetic resonance and classical quenching experiments show that FePc/TM can effectively activate PMS to generate active species under solar light, including superoxide radical (•O2-), singlet oxygen (1O2), hydroxyl radicals(•OH), and sulphate radicals (SO4•-). The intermediates of CBZ were identified by Ultra-high performance liquid chromatography and high resolution mass spectrometry, and the degradation pathway was proposed. As the reaction progresses, all CBZ and intermediates are reduced and converted into small acids, or mineralized to H2O, CO2. This work provides an alternative method for the design of efficient activation of PMS activation catalysts under solar light to eliminate residual pharmaceuticals in actual water bodies.

Efficient removal of chloroform from groundwater using activated percarbonate by cellulose nanofiber-supported Fe/Cu nanocomposites

Chloroform (CF) is a recalcitrant halogenated methane (HM) that has received widespread attention due to its frequent detection in groundwater and its potential carcinogenic risk. In this study, TEMPO-oxidized cellulose nanofiber-supported iron/copper bimetallic nanoparticles (TOCNF-Fe/Cu), a novel composite catalyst, was synthesized to activate sodium percarbonate (SPC) for the removal of CF from groundwater. The results showed that over 96.3% of CF could be removed in a neutral reaction medium (pH 6.5-9) within 180 min using 0.66 g L-1 of TOCNF (0.32)-Fe/Cu (1) and 1 mM of SPC, which outperforms typical advanced oxidation processes. The reaction mechanism of the TOCNF-Fe/Cu-SPC system for the CF removal was elucidated. As demonstrated through electron paramagnetic resonance and quenching experiments, the TOCNF-Fe/Cu-SPC system was found to include •OH and O2•-, where the latter played a dominant role in the CF removal. DFT calculations indicated that TOCNF improved the electron transport capability of Fe/Cu and reduced the transition state energy. The Fe species on the surface of TOCNF-Fe/Cu were identified as the primary active sites for SPC activation, whereas the Cu species were beneficial to the regeneration of the Fe species. Additionally, TOCNF-Fe/Cu was found to have good recyclability and stability. The feasibility of the TOCNF-Fe/Cu-SPC system was further confirmed by applying it for the efficient removal of composite HMs from actually contaminated groundwater. Overall, the TOCNF-Fe/Cu-SPC system is an attractive candidate for the treatment of HM-contaminated groundwater.

The performance and mechanism of iron-mediated chemical oxidation: Advances in hydrogen peroxide, persulfate and percarbonate oxidation

Many studies have successfully built iron-mediated materials to activate or catalyze Fenton-like reactions, with applications in water and wastewater treatment being investigated. However, the developed materials are rarely compared with each other regarding their performance of organic contaminant removal. In this review, the recent advances of Fenton-like processes in homogeneous and heterogeneous ways are summarized, especially the performance and mechanism of activators including ferrous iron, zero valent iron, iron oxides, iron-loaded carbon, zeolite, and metal organic framework materials. Also, this work mainly compares three O-O bond containing oxidants including hydrogen dioxide, persulfate, and percarbonate, which are environmental-friendly oxidants and feasible for in-situ chemical oxidation. The influence of reaction conditions, catalyst properties and benefits are analyzed and compared. In addition, the challenges and strategies of these oxidants in applications and the major mechanisms of the oxidation process have been discussed. This work can help understand the mechanistic insights of variable Fenton-like reactions, the role of emerging iron-based materials, and provide guidance for choosing appropriate technologies when facing real-world water and wastewater applications.

Norfloxacin removal by ultraviolet-activated sodium percarbonate and sodium hypochlorite: process optimization and anion effect

The efficiency of UV-activated sodium percarbonate (SPC) and sodium hypochlorite (SHC) in Norfloxacin (Norf) removal from an aqueous solution was assessed. Control experiments were conducted and the synergistic effect of the UV-SHC and UV-SPC processes were 0.61 and 2.89, respectively. According to the first-order reaction rate constants, the process rates were ranked as UV-SPC > SPC > UV and UV-SHC > SHC > UV. Central composite design was applied to determine the optimum operating conditions for maximum Norf removal. Under optimum conditions (UV-SPC: 1 mg/L initial Norf, 4 mM SPC, pH 3, 50 min; UV-SHC: 1 mg/L initial Norf, 1 mM SHC, pH 7, 8 min), the removal yields for the UV-SPC and UV-SHC were 71.8 and 72.1%, respectively. HCO₃^-, Cl^-, NO₃^-, and SO₄^2- negatively affected both processes. UV-SPC and UV-SHC processes were effective for Norf removal from aqueous solution. Similar removal efficiencies were obtained with both processes; however, this removal efficiency was achieved in a much shorter time and more economically with the UV-SHC process.

Tungsten disulfide (WS2) is a highly active co-catalyst in Fe(III)/H2O2 Fenton-like reactions for efficient acetaminophen degradation

The most important factor that restricts the decomposition of H₂O₂ in the Fe³⁺/H₂O₂ reaction is the slow cycling efficiency of reducing Fe³⁺ to Fe²⁺. In this study, the addition of tungsten disulfide (WS₂) as a co-catalyst achieved a rapid cycling of the reaction rate-limiting step and a significant enhancement of H₂O₂ decomposition, which resulted in the effective degradation of acetaminophen (APAP). Results show that 99.6% of APAP (5 mg L^-1) could be degraded by H₂O₂/Fe³⁺/WS₂ system within 2.5 min. The conversion of Fe³⁺ to Fe²⁺ occurred mainly on the surface of WS₂ due to the redox reaction of the exposed W⁴⁺ active sites with Fe³⁺ after the unsaturated S atoms were bound to protons. Electron paramagnetic resonance (EPR) and radical quenching experiments evaluated the contribution of hydroxyl radical (•OH) and superoxide radical (O₂^•-) in the degradation of pollutants. WS₂ showed good recoverability after four cycles of the reaction. This study provides a new perspective to improve the efficiency of Fe³⁺/H₂O₂ and provides a reference for the involvement of transition metal sulfides in advanced oxidation processes (AOPs).

Degradation of atrazine in river sediment by dielectric barrier discharge plasma (DBDP) combined with a persulfate (PS) oxidation system: response surface methodology, degradation mechanisms, and pathways

Single degradation systems based on dielectric barrier discharge plasma (DBDP) or persulfate (PS) oxidation cannot achieve the desired goals (high degradation efficiency, high mineralization rate, and low product toxicity) of degrading atrazine (ATZ) in river sediment. In this study, DBDP was combined with a PS oxidation system (DBDP/PS synergistic system) to degrade ATZ in river sediment. A Box-Behnken design (BBD) including five factors (discharge voltage, air flow, initial concentration, oxidizer dose, and activator dose) and three levels (- 1, 0, and 1) was established to test a mathematical model by response surface methodology (RSM). The results confirmed that the degradation efficiency of ATZ in river sediment was 96.5% in the DBDP/PS synergistic system after 10 min of degradation. The experimental total organic carbon (TOC) removal efficiency results indicated that 85.3% of ATZ is mineralized into CO₂, H₂O, and NH₄⁺, which effectively reduces the possible biological toxicity of the intermediate products. Active species (sulfate (SO₄•^-), hydroxy (•OH), and superoxide (•O₂^-) radicals) were found to exert positive effects in the DBDP/PS synergistic system and illustrated the degradation mechanism of ATZ. The ATZ degradation pathway, composed of 7 main intermediates, was clarified by Fourier transform infrared spectroscopy (FTIR) and gas chromatography-mass spectrometry (GC-MS). This study indicates that the DBDP/PS synergistic system is a highly efficient, environmentally friendly, novel method for the remediation of river sediment containing ATZ pollution.

Degradation of 1,2,3-trichloropropane by unactivated persulfate and the implications for groundwater remediation

Persulfate (PS) is widely used as an in situ chemical oxidation (ISCO) technology for groundwater and soil remediation. While conventional theory generally assumes that PS needs to be "activated" to produce reactive radicals for pollutant degradation, herein, PS without explicit activation system was discovered for the degradation of 1,2,3-TCP with the generation of reactive oxidation species (ROS). Comparison of five common ISCO oxidants (PS, peroxymonosulfate, hydrogen peroxide, potassium permanganate, and sodium percarbonate) indicated that only unactivated PS was able to degrade 1,2,3-TCP in both pure water and 12 natural water samples. 50 μM 1,2,3-TCP degradation can be continued as long as there is enough PS (50 mM). The degradation rate of 1,2,3-TCP increased 450 % when the PS concentration increased from 10 mM to 50 mM and 500 % when the temperature increased from 25 °C to 45 °C. Electron paramagnetic resonance (EPR) analyzes, hydroxyl radicals (·OH) probe reaction and radical quenching experiments confirmed the involvement of both sulfate radicals (SO₄·-) and ·OH that were responsible for 1,2,3-TCP degradation and ·OH played a more important role. HCO₃^-, Cl^- and NOM are three groundwater matrix species that are most likely to inhibit PS oxidation of 1,2,3-TCP. Compared to activated PS, unactivated PS is more promising and more practical for groundwater remediation, since it has several advantages: (1) longer lifetime and better long-term availability; (2) ability of enduring contaminant degradation; (3) applicable for low-permeability zones remediation and potential to alleviate contaminant rebound or tailing problems; (4) environmental friendly; and (5) lower cost. Overall, results of this study show that unactivated PS is a promising in situ remediation technology that may be a good candidate for the most challenging low permeable zone remediation.

Predicting combined antibacterial activity of sulfapyridine and its transformation products during sulfapyridine degradation

Antibiotics have strong antibacterial activity, even trace antibiotics can greatly inhibit the pollutant degradation efficiency. In order to effectively improve the pollutant degradation efficiency, it was hence of great significance to explore sulfapyridine (SPY) degradation and the mechanism of antibacterial activity. This study selected SPY as the research object, of which the trend of SPY concentration through hydrogen peroxide (H₂O₂), potassium peroxydisulfate (PDS) and sodium percarbonate (SPC) and resultant antibacterial activity at pre-oxidation was examined. The combined antibacterial activity (CAA) of SPY and its transformation products (TPs) was further analyzed. The SPY degradation efficiency reached more than 90 %. However, the degradation efficiency of antibacterial activity was between 40-60 %, and the mixture's antibacterial activity was difficult to be removed. The antibacterial activity of TP3, TP6 and TP7 was higher than that of SPY. TP1, and TP8 and TP10 were more prone to synergistic reaction with other TPs. The antibacterial activity of binary mixture gradually changed from synergism to antagonism as binary mixture concentration increased. The results provided a theoretical basis for the efficient degradation of antibacterial activity of the SPY mixture solution.

Advanced oxidation processes for water purification using percarbonate: Insights into oxidation mechanisms, challenges, and enhancing strategies

Percarbonate (SPC) has drawn considerable attention due to its merits in the safety of handling and transport, stability, and price as well as environmental friendliness, which has been extensively applied in advanced oxidation processes (AOPs) for water decontamination. Nevertheless, comprehensive information on the application of SPC-AOPs for the treatment of organic compounds in aquatic media is scarce. Hence, the focus of this review is to shed light on the mechanisms of reactive oxygen species (ROS) evolution in typical SPC-AOPs (i.e., Fenton-like oxidation, photo-assisted oxidation, and discharge plasma-involved oxidation processes). These SPC-AOPs enable the formation of multiple reactive species like hydroxyl radical (^•OH), superoxide radical (O₂^•-), singlet oxygen (¹O₂), carbonate radicals (CO₃^•-), and peroxymonocarbonate (HCO₄^-), which together or solely contribute to the degradation of target pollutants. Simultaneously, the potential challenges in practical applications of SPC-AOPs are systematically discussed, which include the influence of water quality parameters, cost-effectiveness, available active sites, feasible activation approaches, and ecotoxicity. Subsequently, enhancing strategies to improve the feasibility of SPC-AOPs in the practical implementation are tentatively proposed, which can be achieved by introducing reducing and chelating agents, developing novel activation approaches, designing multiple integrated oxidation processes, as well as alleviating the toxicity after SPC-AOPs treatment. Accordingly, future perspectives and research gaps in SPC-AOPs are elucidated. This review will hopefully offer valuable viewpoints and promote the future development of SPC-AOPs for actual water purification.

Photodegradation of oxytetracycline by UV-assisted persulfate and percarbonate processes: kinetics, influencing factors, anion effect, and radical species

In this study, the performance of ultraviolet (UV)-assisted persulfate (PS) and percarbonate (PC) oxidation processes in oxytetracycline (OTC) removal was investigated. UVC lamps were used for the photolysis process and the effect of operating parameters (initial pH, oxidant dose, initial OTC concentration, UV intensity) on OTC removal efficiency was determined. Control experiments were carried out at pH 5.5 and 32 W UV power for 60 min by adding a 4 mM oxidant with 10 mg/L initial OTC concentration. The OTC removal efficiency obtained as a result of only photolysis was 17.3% and the removal efficiency obtained by PS and PC oxidation alone was 18.3% and 12.7%, respectively. The OTC removal efficiencies increased in the combined processes and reached 58.1% and 69.9% for the UV-PS and UV-PC processes, respectively. The reaction rates of the processes were ranked as UV-PC > UV-PS > PS > UV > PC. In the UV-PS and UV-PC processes, the highest removal efficiencies were achieved at alkaline pH values. The OTC removal efficiency was increased with the increase in oxidant dose; however, the efficiency decreased after a certain dose due to the scavenging effect. The removal efficiency also increased as the initial OTC concentration decreased. The UV intensity had a positive effect on OTC removal efficiency. The effect of the water matrix on OTC removal efficiency was investigated while the dominant radical types were determined in UV-assisted processes. The EE/O values for the UV-PS and UV-PC processes were calculated as 211 kWh/m³ and 153 kWh/m³, respectively for 60 min of reaction time. Although similar removal efficiencies were obtained with both UV-assisted processes, the UV-PC process steps forward in terms of being a novel, environmentally friendly, more economic, and promising technology for OTC removal.

Heterogeneous catalytic activation of peroxydisulfate toward degradation of pharmaceuticals diclofenac and ibuprofen using scrap printed circuit board

Pharmaceutical residues have been identified as a priority contaminant due to their toxicity to organisms and the ecosystem as representative refractory organic compounds in water. Therefore, using efficient treatment methods to remove them from wastewater has become a crucial topic of research. Advanced oxidation processes (AOPs) based on the sulfate radical have gained increased attention in recent years due to their superior performance and adaptability in the decomposition of refractory organic contaminants. In this work, scrap printed circuit boards (PCBs) were used to prepare a low-cost and efficient heterogeneous peroxydisulfate (PDS) catalytic activator via thermal treatment with an air combustion non-carbonized catalyst (NCC) and pyrolysis with a nitrogen carbonized catalyst (CC) for the removal of diclofenac (DCF) and ibuprofen (IBF) from water at circumneutral pH. The synthesized catalysts were characterized by several analytical techniques. The effects of various experimental parameters on the removal efficiency were examined. Under optimum conditions, the degradation efficiency reached 76% and 71% with NCC and 63% and 57.5% with CC within 60 min for DCF and IBP, respectively. The mineralization efficiency as measured by TOC removal reached up to 65% after 60 min treatment. The degradation kinetics for both catalysts followed the pseudo-first-order model. Results from quenching tests showed that the reactive oxidizing species (ROS), including 1O2 > SO4˙- > ˙OH, were generated mainly in the NCC/PDS and CC/PDS systems. Overall, the prepared catalysts were found to be effective and reusable for PDS activation for the removal of pharmaceutical pollutants from water. This study provided a promising, robust and efficient heterogeneous catalytic PDS activation based on the strategy of "waste-treats-waste" for the removal of pharmaceutical pollutants from water.

A novel Fe/Mo co-catalyzed graphene-based nanocomposite to activate peroxymonosulfate for highly efficient degradation of organic pollutants

A novel 3D α-FeOOH@MoS₂/rGO nanocomposite was successfully fabricated by a simple in situ hydrothermal method. It is a highly efficient heterogeneous catalyst in activation of peroxymonosulfate (PMS) for rapid degradation of rhodamine B (RhB), with 99.9% of RhB removed within 20 min. The introduction of rGO contributes to uniform dispersion and sufficient contact of α-FeOOH and MoS₂ nanosheets. Highly active Mo(IV) enhances the reduction of Fe(III), improves Fe(III)/Fe(II) conversion and promotes the generation of O₂1, which ensures an improved catalytic activity. MoS₂/rGO hybrid can effectively solve the problem of material reunion and make α-FeOOH exhibit excellent catalytic performance. The α-FeOOH@MoS₂-rGO/PMS system is a co-catalytic system based on the active components of α-FeOOH and MoS₂. The main reactive oxygen species in the α-FeOOH@MoS₂-rGO/PMS system are O₂1, SO₄^.- and ⋅O₂^-, which contribute to a high reactivity over a wide range of pH (5-9). Besides, this system is highly resistant to anions (Cl^-, SO₄^2-) and natural organic matter (humic acid), and can be widely used for degradation of common organic pollutants. The α-FeOOH@MoS₂/rGO is a promising Fenton-like catalyst for refractory organic wastewater treatment.

Study on the catalytic degradation of Acid Orange 7 and the potential mechanism by ferrous-percarbonate

Factors affecting the degradation of Acid Orange 7 (AO7) were evaluated and optimized when ferrous was used to catalyze percarbonate in the present study. The optimized conditions included the initial pH values ranging from 3 to 11 for AO7 solution, the initial level of AO7, sodium percarbonate (SPC), and Fe²⁺ . Some ions and natural organic materials, which commonly exist in natural water, were also tested to evaluate their potential impacts on the degradation of AO7. The degradation efficiency of AO7 was up to 95% under the optimized test conditions, where the ferrous/percarbonate/AO7 molar ratio was 15/10/1 in the 0.285 mmol/l AO7 aqueous solution. The presence of Cl^- , SO₄ ^2- , NO₃ ^- , Na⁺ , and Mg²⁺ did not affect the removal of AO7. The addition of HCO₃ ^- significantly inhibited its removal, even when the concentration of HCO₃ ^- was low to 0.6 mmol/l. A slight inhibition effect was observed when the added concentration of humic acid ranged from 0.5 to 5 mg/l, whereas the residue of AO7 was significantly enhanced when the level of humic acid was continually increased from 50 to 100 mg/l. Hydroxyl radicals (•OH) were the main reactive intermediates controlling the oxidation of AO7 in the present Fe²⁺ /SPC system. The produced intermediates through the degradation of AO7 were identified to include 2-coumaranone, 2-naphthol, phthalic acid, phthalimide, N-methylnaphthylamine, and 2-methylphenol. The proposed degradation pathways are consistent with the radical formation and the identified intermediates. PRACTITIONER POINTS: The ferrous/percarbonate system can remove 95% of AO7 under the optimized conditions. AO7 removal was inhibited by adding HCO₃ ^- and humic acid, but not affected by Cl^- , SO₄ ^2- , NO₃ ^- , Na⁺ , and Mg²⁺ . Hydroxylation, ring opening, and mineralization driven by the generated hydroxyl radicals were derived as the major processes for degrading AO7.

Unveiling the behaviors and mechanisms of percarbonate on the sludge anaerobic fermentation for volatile fatty acids production

Percarbonate (PC), as a cheap and environmental-friendly chemical oxidant, has been applied extensively in various fields. However, the impacts of PC on the waste activated sludge (WAS) anaerobic fermentation process are unknown. This study mainly aimed to investigate its effects on the production of volatile fatty acids (VFAs) and disclose the underlying mechanisms. Results indicated that the maximal VFAs yield at 0.3 g PC/g TSS within 4 d was 1452.9 mg COD/L while it was only 296.4 mg COD/L in the control at the fermentation time of 6 d. The mechanistic analysis demonstrated that PC treatment substantially promoted the extracellular polymeric substances (EPS) disruption and cell lysis, and meanwhile improved the biodegradability of released organics, thereby providing more bio-availability substrates for further acidogenic metabolic processes. Moreover, the abundance of fermentative microorganisms (i.e., Proteiniclasticum) and the microbial activities correlated with substrates metabolism and VFAs biosynthesis (i.e. hydrolases and metabolic genetic expression levels) were also evidently improved by the PC. This work provides a feasible method for improving the resource recovery from WAS and discloses the responses of the microbial community to chemicals stimulus for the regulations of the biochemical fermentation process in anaerobic systems.

Novel sodium percarbonate-MnO2 effervescent tablets for efficient and moderate membrane cleaning

Membrane flux recovery efficiency and durability are two key factors closely associated with the practical application for membrane cleaning process. However, conventional chemical membrane cleaning method by soaking the whole membrane module in highly concentrated chemical reagents has prominent drawbacks including the low mass transfer efficiency of reagents, long period of washing time, and the potential threat to membrane structure. Herein, for the first time, we report a facile approach to fabricate the sodium percarbonate-MnO₂ effervescent tablets which show bubbling reaction to release oxygen and free radicals when being dispersed in water for membrane cleaning. Due to the synergistic effect of MnO₂ and sodium percarbonate, the tablets are highly effective to clean the membrane fouled by humic acid within 5 min, with the terminal membrane flux being recovered from 0.50 to 0.95, and the irreversible fouling resistance being reduced by more than 90%, which is prominently more efficient than the conventional chemical cleaning methods. Moreover, even by consecutive membrane fouling and cleaning for 6 times, the membrane flux and filtration efficiency of the membrane could still be kept almost constant, and the moderateness of this membrane cleaning method was also verified by the systematic microscopic analysis. For mechanism study, results of Electron Spin Resonance (ESR) and quenching experiments indicated that the high-efficiency and robust durability of sodium percarbonate-MnO₂ (SPC-MnO₂) system for membrane cleaning was mainly attributed to the abundantly generated hydroxyl radicals and secondary free radicals (i.e. carbonate radicals). Conclusively, compared with the conventional membrane cleaning method with liquid cleaning reagents, the novel SPC-MnO₂ system with remarkable advantages in terms of convenience and membrane cleaning performance demonstrated high potential for the wide application in practice.

Degradation of dimethachlon by a newly isolated bacterium Paenarthrobacter sp. strain JH-1 relieves its toxicity against Chlorella ellipsoidea

Dimethachlon, a broad-spectrum dicarboximide fungicide, poses a hazard to the safety of human and ecosystem due to its residue in the environment. A high-efficient dimethachlon degrading bacteria JH-1 belonging to Paenarthrobacter sp. was isolated and characterized. Strain JH-1 can utilize high concentration of dimethachlon as sole carbon source for growth and degrade 98.53% of 300 mg·L^-1 dimethachlon within 72 h. Crude enzyme of strain JH-1 could degrade 99.76% of 100 mg·L^-1 dimethachlon within 2 h. The optimum degradation condition of dimethachlon by strain JH-1 was at 35 °C and pH 7.0. Dimethachlon was degraded in Paenarthrobacter sp. JH-1 as following: it was firstly converted to 4-(3,5-dichloroanilino)-4-oxobutanoic acid and then subjected to the hydrolysis to 3,5-dichloroaniline and succinic acid, the latter was further degraded. Dimethachlon inhibited the growth of Chlorella ellipsoidea, while Paenarthrobacter sp. JH-1 could degrade dimethachlon to relieve its toxicity. This work facilitates our knowledge of the degradation mechanism of dimethachlon and offers potential resource of microbial strains for the bioremediation of dimethachlon-contaminated environments in the future.

Sustainable and effective degradation of aniline by sodium percarbonate activated with UV in aqueous solution: Kinetics, mechanism and identification of reactive species

In recent decades, sodium percarbonate (SPC) has been widely applied as a solid replacement for H₂O₂ in advanced oxidation process (AOPs). In this study, ultraviolet (UV) light was utilized for SPC activation to investigate the aniline degradation performance. The effects of SPC dosages and UV irradiation on aniline degradation were elaborated. The removal efficiency was significantly improved by increasing either the SPC dosage or UV irradiation intensity. Moreover, scavenging experiments showed that •OH, CO₃^•-, and O₂^•- were the predominant reactive species for aniline degradation. Meanwhile, the variation in the amount of •OH in the UV/SPC system was monitored, which revealed the dominant role of •OH. As a result, the mechanism of aniline degradation by the UV/SPC system was demonstrated based on confirmed free radicals. Furthermore, aniline degradation by the UV/H₂O₂ and UV/H₂O₂/Na₂CO₃ system were compared with the UV/SPC system, and an enhancement by the addition of Fe(II) in the UV/SPC system was verified. Aniline degradation was not significantly affected by the initial pH or the presence of Cl^-, SO₄^2- while NO₃^-, HCO₃^- and humid acid (HA) suppressed the reaction. In general, the UV/SPC system is a novel, green, and promising technology for aniline removal from aqueous solutions.

Preparation, characterization, and applications of Fe-based catalysts in advanced oxidation processes for organics removal: A review

Fe-based catalysts as low-cost, high-efficiency, and non-toxic materials display superior catalytic performances in activating hydrogen peroxide, persulfate (PS), peracetic acid (PAA), percarbonate (PC), and ozone to degrade organic contaminants in aqueous solutions. They mainly include ferrous salts, zero-valent iron, iron-metal composites, iron sulfides, iron oxyhydroxides, iron oxides, and supported iron-based catalysts, which have been widely applied in advanced oxidation processes (AOPs). However, there is lack of a comprehensive review systematically reporting their synthesis, characterization, and applications. It is imperative to evaluate the catalytic performances of various Fe-based catalysts in diverse AOPs systems and reveal the activation mechanisms of different oxidants by Fe-based catalysts. This work detailedly summarizes the synthesis methods and characterization technologies of Fe-based catalysts. This paper critically evaluates the catalytic performances of Fe-based catalysts in diverse AOPs systems. The effects of solution pH, reaction temperature, coexisting ions, oxidant concentration, catalyst dosage, and external energy on the degradation of organic contaminants in the Fe-based catalyst/oxidant systems and the stability of Fe-based catalysts are also discussed. The activation mechanisms of various oxidants and the degradation pathways of organic contaminants in the Fe-based catalyst/oxidant systems are revealed by a series of novel detection methods and characterization technologies. Future research prospects on the potential preparation means of Fe-based catalysts, practical applications, assistive technologies, and impact in AOPs are proposed.

On the Performance of a Sustainable Rice Husk Biochar for the Activation of Persulfate and the Degradation of Antibiotics

Sulfate-radical-based advanced oxidation processes are highly effective in the degradation of antibiotics in water and wastewater. The activation of sulfate radicals occurs with the use of biochar, a low-cost carbon material. In this work, the preparation of biochar from rice husk for the degradation of various antibiotics was studied, and the biochar was compared with another biochar prepared at a different pyrolysis temperature. The biochar was prepared at 700 °C under limited O2. It had a high specific surface area of 231 m2 g−1 with micropores, a point of zero charge equal to 7.4 and a high silica content. The effect of different operating conditions on the degradation of organic compounds was studied. Increases in biochar dosage and sodium persulfate concentration were found to be beneficial for the degradation. In contrast, an increase in antibiotic concentration, the complexity of the water matrix and the existence of radical scavengers all had a detrimental effect on the activity. The comparison of the results with those from a biochar prepared at a higher temperature (850 °C) revealed that the preparation conditions affect the performance. The biochar pyrolyzed at 700 °C exhibited different behavior from that prepared at 850 °C, demonstrating the importance of the preparation route. The studied reaction was surface-sensitive and followed radical and non-radical pathways. The adsorption of the organic contaminant also played a significant role. The carbon phase characteristics determined the dominant pathway, which was radical formation, in contrast with the biochar prepared at higher temperature, where the degradation followed mainly non-radical pathways.

New research on reduction and/or elimination of hazardous substances in the design, manufacture and application of chemical products

The Virtual Special Issue (VSI) "New research on reduction and/or elimination of hazardous substances in the design, manufacture and application of chemical products" was initially associated to the "International Conference on Green Chemistry and Sustainable Engineering, GreenChem-20" that was postponed due to the COVID-19 pandemic. Anyway, the international conference will take place in the near future. However, the VSI was maintained in this journal, received a high number of submissions, and selected manuscripts have been accepted after peer-reviewing. The published papers constitute a set of high-quality contributions, which, in the future, could be complemented with others related to additional conferences about similar topics. In this editorial piece, the Editors include brief comments on papers accepted for publication in the Special Issue, as well as additional aspects of interest related to the subject.