Heat treatment of sunflower protein isolates near isoelectric point: Effect on rheological and structural properties

Purification, microstructure, functional properties and antioxidant activity of peptides from Chinese pond turtle hydrolysate

Chinese pond turtle muscle peptide's molecular features, purification, structural characteristics, and antioxidant activity were investigated. The Flavourzyme hydrolysate demonstrated greater relative crystallinity (37.53%) than other hydrolysates using X-ray diffraction. The fourier transform infrared spectroscopy spectral changes, the second derivative spectroscopy in the amide-I region (1620-1650 cm-1). Zeta-potential measurement was used to determine the surface charge ranging from - 32.73 to - 28.23 mV. Trypsin hydrolysate obtained the highest solubility (98.72% at pH 1.0) and emulsifying activity (182.81 m2 g-1 at pH 7.0), respectively. The Flavourzyme hydrolysate was separated by Sephadex G-10 filtration column chromatography, and three fractions (FH-1, FH-2, and FH-3) were obtained. The molecular weight was < 150 Da in fractions FH-3, FH-2, and FH-1, which were 93.25%, 85.22%, and 76.76%, respectively. The antioxidant activity showed the highest DPPH activity (71.32%) at 7 mg/mL in Fraction FH-2. SEM had a different shape (ball-drop) at FH-2 than the fractions protein (FH-1 and FH-3).

A mechanistic investigation into combined influences of NaCl and extrusion temperature on fibrous structures of high-moisture textured yeast protein

NaCl and extrusion temperature have an important influence on the qualities of high-moisture textured proteins, but the influence mechanism is still unclear. Therefore, this study prepared high-moisture textured yeast protein (HMTYP) with different NaCl contents (0%-4%) under different extrusion temperatures (170 °C, 180 °C) and characterized their physicochemical properties. The results showed that the HMTYP containing 1% and 2% NaCl prepared at 180 °C contained a strong fibrous structure. The possible mechanism was as follows: YP could not be sufficiently melted at 170 °C after adding NaCl, causing a decrease in the structural strength; however, at 180 °C, YP still reached a fully molten state even though 1%-2% NaCl was added. After YP sufficiently melted, NaCl enhanced the cross-linking and aggregation of proteins during cooling, which improved the textural properties of HMTYP. Accordingly, NaCl and extrusion temperature could combine to adjust the fibrous structure and texture of HMTYP.

Novel mode of kafirin modification using combination of enzyme and thermal treatment to expand its food application

Kafirin in sorghum inhibits starch digestion and exhibits antioxidant properties, however its potential in food industry remains unexplored. Therefore, the study was aimed to explore and improve the potential of kafirin as natural carbohydrate blocker using papain (6 NFU/mL) and/or infrared treatment (220 °C/3 min). Results indicated that the combined treatment, PIR (infrared + papain) is the most efficient treatment to modify kafirin. PIR generated a new ∼37 kDa high molecular weight moiety in kafirin with a crystal size of 157.44 Å. All samples showed superior antioxidant activity post-treatments, with PIR exhibiting highest scavenging activity from 31.09 to 82.97%, 15.09 to 42.82%, and 25.92 to 38.58% for DPPH, FRAP, and ABTS, respectively. PIR-modified kafirin limited malondialdehyde production, and increased α-amylase and α-glucosidase inhibition. Incorporation of 7.5% kafirin in corn starch increased resistant starch from 5.09 to 21.04% after cooking, which suggests potential of kafirin in development of diabetic-friendly food formulations.

Techno-functional, physicochemical and thermal characteristics of black chickpeas aquafaba under ultrasound pre-processing

Aquafaba is the liquid that remains from the cooking of beans in the canning industry, generally discarded as wastewater. This research aimed to optimize ultrasound pretreatment to enhance this by-product and introduce it as a high-added value product (known as liquid gold) in the food industry. The results showed that with the increase in the sonication time and amplitude, the extraction efficiency, soluble protein content, the density, and dry matter content of black chickpeas aquafaba increased significantly (p < 0.05). The results also demonstrated that foaming ability (in short ultrasonication times) and foam stability significantly increased with higher amplitude. The results of numerical optimization showed that ultrasound pre-treatment for 30 min with an amplitude of 72 % on black chickpeas before the cooking process created the best conditions for aquafaba extraction. Under these optimized conditions, the results yielded the highest values so that extraction efficiency, protein content, density, dry matter, foaming ability, and foam stability were 212.07 %, 3546.7 mg/kg, 1.038 g/mL, 4.76 %, 243.57 %, and 44.50 % respectively. Thermogravimetric and FT-IR analysis showed that the pre-sonication process not only makes aquafaba thermally stable, but also does not cause any structural changes in its chemical components. According to the favorable physicochemical characteristics of aquafaba, this product can benefit the food industry. It can be a material with high added value, profitable for the canning industry.

Effect of partial substitution of NaCl by KCl on aggregation behavior and gel properties of beef myosin

Based on the three typical gels under KCl substitution groups, the effect of partial substitution of NaCl by KCl (groups: T 1:0.6 M NaCl; T 2: 0.3 M NaCl +0.3 M KCl; T 3: 0.2 M NaCl +0.4 M KCl; T 4:0.6 M KCl) on the aggregation behavior and gel characteristics of myosin was evaluated. The significant changes in hydrophobicity and sulfhydryl content (P < 0.05) indicate KCl substitution enhances myosin aggregation through hydrophobic interactions and disulfide bonds. According to Ca2+-ATP, scanning electron microscopes (SEM) and the rheological results, T2 had a smoother network structure at about 75 °C. Noticeably, T3 had high water holding capacity (WHC), but its gel had some visible cavities. T4 had a gel structure with several irregular aggregates due to a greater aggregation rate. Thus, appropriate partial substitution of NaCl by KCl could enhance beef myosin gel properties and heat-induced aggregation behavior.

Effect of microwave treatment and water-bath heating treatment on the performance of glutenin from Tiger nut seed meal: Insights into changes in structural characteristics, functional properties, and in vitro gastrointestinal digestibility

In this study, the structural characteristics, functional properties, and in vitro gastrointestinal digestibility of glutenin from Tiger nut seed meal (TNSMG) treated by microwave (140-700 W, 20-60 s) and water-bath heating (40-100 °C, 10-30 min) were investigated. Analysis of the surface hydrophobicity, intrinsic fluorescence spectroscopy and Fourier transform infrared spectroscopy indicated that both microwave and water-bath heating treatments caused structure changes of TNSMG. The results showed an increase in the exposure of sulfhydryl groups and the content of β-sheet, coupled with a decrease in the content of α-helix and β-turn. These structural changes contributed to the improved solubility, foamability, emulsification properties, and digestibility of TNSMG under proper thermal treatment conditions. TNSMG exhibited the best solubility (68.48%) and foamability (85.56%) after water-bath heating treatment for 20 min at 80 °C. Furthermore, TNSMG showed the best emulsification property (9.61 m2/g) and digestibility (78.58%) when treated by microwave treatment at 560 W for 40 s.

Sustainable proteins from wine industrial by-product: Ultrasound-assisted extraction, fractionation, and characterization

Plant proteins are increasingly being used in the food industry due to their sustainability. They can be isolated from food industry waste and converted into value-added ingredients, promoting a more circular economy. In this study, ultrasound-assisted alkaline extraction (UAAE) was optimized to maximize the extraction yield and purity of protein ingredients from grapeseeds. Grapeseed protein was extracted using UAAE under different pH (9-11), temperature (20-50 °C), sonication time (15-45 min), and solid/solvent ratio (10-20 mL/g) conditions. The structural and functional attributes of grapeseed protein and its major fractions (albumins and glutelins) were investigated and compared. The albumin fractions had higher solubilities, emulsifying properties, and in vitro digestibilities but lower fluid binding capacities and thermal stability than the UAAE and glutelin fraction. These findings have the potential to boost our understanding of the structural and functional characteristics of grapeseed proteins, thereby increasing their potential applications in the food and other industries.

Structure, functional and physicochemical properties of lotus seed protein under different pH environments

BACKGROUND

The present study investigated the structure, functional and physicochemical properties of lotus seed protein (LSP) under different pH environments. The structures of LSP were characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, Fourier transform infrared spectroscopy (FTIR), zeta potential, particle size distributions, free sulfhydryl and rheological properties. The functional and physicochemical properties of LSP were characterized by color, foaming property, emulsification property, solubility, oil holding capacity, water holding capacity, differential scanning calorimetry analysis and surface hydrophobicity.

RESULTS

LSP was mainly composed of eight subunits (18, 25, 31, 47, 51, 56, 65 and 151 kDa), in which the richest band was 25 kDa. FTIR results showed that LSP had high total contents of α-helix and β-sheet (44.81-46.85%) in acidic environments. Meanwhile, there was more β-structure and random structure in neutral and alkaline environments (pH 7.0 and 9.0). At pH 5.0, LSP had large particle size (1576.98 nm), high emulsion stability index (91.43 min), foaming stability (75.69%) and water holding capacity (2.21 g g-1), but low solubility (35.98%), free sulfhydryl content (1.95 μmol g-1) and surface hydrophobicity (780). DSC analysis showed the denaturation temperatures (82.23 °C) of LSP at pH 5.0 was higher than those (80.10, 80.52 and 71.82 °C) at pH 3.0, 7.0 and 9.0. The analysis of rheological properties showed that LSP gel had high stability and great strength in an alkaline environment.

CONCLUSION

The findings of the present study are anticipated to serve as a valuable reference for the implementation of LSP in the food industry. © 2024 Society of Chemical Industry.

A comprehensive review on the recent trends in extractions, pretreatments and modifications of plant-based proteins

Plant-based proteins offer sustainable and nutritious alternatives to animal proteins with their techno-functional attributes influencing product quality and designer food development. Due to the inherent complexities of plant proteins, proper extraction and modifications are vital for their effective utilization. This review highlights the emerging sources of plant-based proteins, and the recent statistics of the techniques employed for pretreatment, extraction, and modifications. The pretreatment, extraction and modification approach to modify plant proteins have been classified, addressed, and the recent applications of such methodologies are duly indicated. Furthermore, this study furnishes novel perspectives regarding the potential impacts of emerging technologies on the intricate dynamics of plant proteins. A thorough review of 100 articles (2018-2024) shows the researchers' keen interest in investigating novel plant proteins and how they can be used; seeds being the main source for protein extraction, followed by legumes. Use of by-products as a protein source is increasing rapidly, which is noteworthy. Protein studies still lack knowledge on protein fraction, antinutrients, and pretreatments. The use of physical methods and their combination with other techniques are increasing for effective and environmentally friendly extraction and modification of plant proteins. Several studies explore the effect of protein changes on their function and nutrition, especially with a goal of replacing ingredients with plant proteins that have improved or enhanced qualities. However, the next step is to investigate the sophisticated modification methods for deeper insights into food safety and toxicity.

Euglena gracilis Protein: Effects of Different Acidic and Alkaline Environments on Structural Characteristics and Functional Properties

Due to the growing demand for human-edible protein sources, microalgae are recognized as an economically viable alternative source of proteins. The investigation into the structural characteristics and functional properties of microalgin is highly significant for its potential application in the food industry as an alternative source of protein. In this research, we extracted protein from Euglena gracilis by using alkaline extraction and acid precipitation and investigated its structural characteristics and functional properties in different acidic and alkaline environments. The molecular weight distribution of Euglena gracilis protein (EGP), as revealed by the size exclusion chromatography results, ranges from 152 to 5.7 kDa. EGP was found to be rich in hydrophobic amino acids and essential amino acids. Fourier infrared analysis revealed that EGP exhibited higher α-helix structure content and lower β-sheet structure content in alkaline environments compared with acidic ones. EGP exhibited higher foaming properties, emulsifying activity index, solubility, free sulfhydryl, and total sulfhydryl in pH environments far from its isoelectric point, and lower fluorescence intensity (2325 A.U.), lower surface hydrophobicity, larger average particle size (25.13 µm), higher emulsifying stability index, and water-holding capacity in pH environments near its isoelectric point. In addition, X-ray diffraction (XRD) patterns indicated that different acidic and alkaline environments lead to reductions in the crystal size and crystallinity of EGP. EGP exhibited high denaturation temperature (Td; 99.32 °C) and high enthalpy (ΔH; 146.33 J/g) at pH 11.0, as shown by the differential scanning calorimetry (DSC) results. The findings from our studies on EGP in different acidic and alkaline environments provide a data basis for its potential commercial utilization as a food ingredient in products such as emulsions, gels, and foams.

Isolation of detoxified cassava (Manihot esculenta L.) leaf protein by alkaline extraction-isoelectric precipitation: Optimization and its characterization

The cassava leaves protein isolate extraction and optimization were investigated using response surface methodology, where the maximum protein content (21.83 ± 0.41 g/100 g dm), extraction yield (18.31 ± 0.53%), and protein recovery yield (69 ± 1.31%) were obtained at optimal conditions: 114 min extraction time, 46 °C extraction temperature, 23.5 mL/g solvent/solute ratio and pH 11.0 value. The presence of toxicant (Cyanide) and anti-nutrient (tannin) in cassava leaves reduced the bio-accessibility of its protein isolate, strictly prohibiting its consumption. Therefore, detoxification was applied to diminish cyanide and tannin to 85% and 69% in leaves, respectively, where the protein content was reduced to 9.7%. However, detoxified cassava leaf protein isolate exhibited changes in the compositional, structural, morphological, molecular, and thermal characteristics compared to the controlled one. Moreover, the functional properties in protein isolate improved after detoxification at different pH conditions, which can be used as an active ingredient in various foods.

Effects of nitrogen fertilizer on the physicochemical, structural, functional, thermal, and rheological properties of mung bean (Vigna radiata) protein

Nitrogen fertilizer can affect the seed quality of mung bean. However, the effects of nitrogen fertilizer on the properties of mung bean protein (MBP) remain unclear. We investigated the effects of four nitrogen fertilization levels on the physicochemical, structural, functional, thermal, and rheological properties of MBP. The results showed that the amino acid and protein contents of mung bean flour were maximized under 90 kg ha-1 of applied nitrogen treatment. Nitrogen fertilization can alter the secondary and tertiary structure of MBP. The main manifestations are an increase in the proportion of β-sheet, the exposure of more chromophores and hydrophobic groups, and the formation of loose porous aggregates. These changes improved the solubility, oil absorption capacity, emulsion activity, and foaming stability of MBP. Meanwhile, Thermodynamic and rheological analyses showed that the thermal stability, apparent viscosity, and gel elasticity of MBP were all increased under nitrogen fertilizer treatment. Correlation analysis showed that protein properties are closely related to changes in structure. In conclusion, nitrogen fertilization can improve the protein properties of MBP by modulating the structure of protein molecules. This study provides a theoretical basis for the optimization of mung bean cultivation and the further development of high-quality mung bean protein foods.

Effect of high moisture extrusion on the structure and physicochemical properties of Tartary buckwheat protein and its in vitro digestion

Tartary buckwheat is rich in nutrients and its protein supports numerous biological functions. However, the digestibility of Tartary buckwheat protein (TBP) poses a significant limitation owing to its inherent structure. This study aimed to assess the impact of high moisture extrusion (HME, 60 % moisture content) on the structural and physicochemical attributes, as well as the in vitro digestibility of TBP. Our results indicated that TBP exhibited unfolded and amorphous microstructures after HME. The protein molecular weight of TBP decreased after HME, and a greater degradation was observed at 70 °C than 100 °C. In particular, HME at 70 °C caused an almost complete disappearance of bands near 35 kDa compared with HME at 100 °C. In addition, compared with native TBP (NTBP, 44.53 µmol/g protein), TBP subjected to HME at 70 °C showed a lower disulfide bond (SS) content (42.67 µmol/g protein), whereas TBP subjected to HME at 100 °C demonstrated a higher SS content (45.70 µmol/g protein). These changes endowed TBP with good solubility (from 55.96 % to 83.31 % at pH 7), foaming ability (20.00 %-28.57 %), and surface hydrophobicity (8.34-23.07). Furthermore, the emulsifying activity (EA) and in vitro digestibility are closely related to SS content. Notably, extruded TBP (ETBP) obtained at 70 °C exhibited higher EA and digestibility than NTBP, whereas ETBP obtained at 100 °C showed the opposite trend. Consequently, HME (especially at 70 °C) demonstrated significant potential as a processing technique for improving the functional and digestive properties of TBP.

L-Theanine Improves the Gelation of Ginkgo Seed Proteins at Different pH Levels

L-theanine (L-Th), a non-protein amino acid naturally found in teas and certain plant leaves, has garnered considerable attention due to its health benefits and potential to modify proteins such as ginkgo seed proteins, which have poor gelling properties, thereby expanding their applications in the food industry. The objective of this study was to investigate the impact of varying concentrations of L-Th (0.0%, 0.5%, 1.0%, and 2.0%) on the gelling properties of ginkgo seed protein isolate (GSPI) at various pH levels (5.0, 6.0, and 7.0). The GSPI gels exhibited the highest strength at a pH of 5.0 (132.1 ± 5.6 g), followed by a pH of 6.0 (95.9 ± 3.9 g), while a weak gel was formed at a pH of 7.0 (29.5 ± 0.2 g). The incorporation of L-Th increased the hardness (58.5-231.6%) and springiness (3.0-9.5%) of the GSPI gels at a pH of 7.0 in a concentration-dependent manner. However, L-Th did not enhance the gel strength or water holding capacity at a pH of 5.0. The rheological characteristics of the GSPI sols were found to be closely related to the textural properties of L-Th-incorporated gels. To understand the underlying mechanism of L-Th's effects, the physicochemical properties of the sols were analyzed. Specifically, L-Th promoted GSPI solubilization (up to 7.3%), reduced their hydrophobicity (up to 16.2%), reduced the particle size (up to 40.9%), and increased the ζ potential (up to 21%) of the sols. Overall, our findings suggest that L-Th holds promise as a functional ingredient for improving gel products.

Olive leaf protein: Extraction optimization, in vitro digestibility, structural and techno-functional properties

Olive leaf, as an important by-product of olive farming, is generated from the pruning and harvesting of olive trees and represents >10 % of the total olive weight. The present study was conducted to evaluate the composition, functional and structural characterizations, as well as the in vitro digestibility of olive leaf proteins isolated from ultrasonic-assisted extraction, comparing to classical and industrial techniques. The ultrasound-assisted extraction of olive leaf protein was optimized by the simultaneous maximization of the yield and purity of protein using a Box-Behnken design (BBD) of response surface methodology (RSM). The results indicated that the optimal extraction conditions were as follows: pH of 10.99, temperature of 40.48 °C, sonication time of 47.25 min, and solvent/solid ratio of 24.08 mL/g. Under these conditions, the extraction yield and protein content were 11.67 and 51.2 %, respectively, which were significantly higher than those obtained by the conventional techniques. Regarding the functionality of protein, extraction technique had significant impacts on the structural and functional properties of proteins. In general, ultrasound assisted extraction had higher solubility, and better foaming and thermal properties and in vitro digestibility but lower emulsifying stability and fluid binding capacity compared to conventional ones. Ultrasound-assisted alkaline extraction has great potential to produce edible olive leaf protein with modified functional properties that can be used for various aims in the food applications.

Thermo-induced changes in the structure of lentil protein isolate (Lens culinaris) to stabilize high internal phase emulsions

This study aims to assess the impact of heat treatment on the emulsifying properties of lentil protein isolate (LPI) dispersion to produce high internal phase emulsions (HIPEs). The heat-treated LPI dispersion was characterized by size, turbidity, solubility, zeta potential, free sulfhydryl group, electrophoresis, differential scanning calorimetry, circular dichroism, Fourier transforms infrared spectroscopy and intrinsic fluorescence. HIPEs were produced with 25% of LPI dispersion (2%, w/w) and soybean oil (75%) using a rotor-stator (15,500 rpm/1 min). HIPEs were evaluated for their droplet size, zeta potential, centrifugal stability, microscopy, appearance, Turbiscan stability, and rheology over 60 days (25 °C). Heat treatment reduced the size of LPI, resulting in increased turbidity, solubility, and exposure of hydrophobic groups. HIPEs produced with heat-treated LPI at 70 °C (HIPE70) and 80 °C (HIPE80) for 20 min exhibited lower droplet sizes, increased stability, reduced oil loss, and a homogeneous appearance compared to HIPE produced with untreated LPI (HIPEc). In addition, HIPE70 and HIPE80 displayed resistance to shear stress, higher apparent viscosity, and increased storage modulus than HIPEc. HIPEs produced with heat-treated LPI were stable, suggesting that the treatment was efficient for improving the functional properties of the protein and the possibility of future research focusing on fat substitutes in food applications.

Improvement of foaming properties of ovalbumin: Insights into the synergistic effect of preheating and high-intensity ultrasound on physicochemical properties and structure analysis

Ovalbumin (OVA), characterized by its high concentration in eggs, possesses remarkable foaming properties. Nevertheless, OVA is highly sensitive to thermal changes and acid-base conditions, substantially hampering its application potential for foaming purposes within the food industry. This experiment aimed to examine the effects of preheating and high-intensity ultrasound (HIU) treatment at different powers on OVA foaming properties and explore the underlying mechanisms. The results revealed that OVA exhibited the highest foaming capacity (31.5 %) and foaming stability (96.7 %) under the treatment condition of 200w + 60°C. Additionally, significant improvements were observed in the content of free sulfhydryl groups (37.27 μmg/g), solution viscosity (142.33 mPa·s), and surface hydrophobicity (37.27 μg BPB) under this condition. The absolute value of the zeta potential (-10.28 mV) was significantly increased in the 200w + 60°C treatment group. Moreover, the polymer dispersity index of OVA (0.6045) was significantly reduced, resulting in improved dispersion than the control group. The structural analysis revealed significant changes in the α-helix and β-sheet content of OVA after treatment at 200w + 60 °C. The X-ray diffraction pattern exhibited sharper peaks, indicating a crystal structure, and the fluorescence peak displayed a slight blue shift along with increased hydrophobicity. Moreover, the preheating and HIU treatment induced a continuous uneven and irregular pore structure in OVA, which ultimately enhanced its foaming properties. In conclusion, the preheating and HIU treatment offers a novel approach to enhance the foaming properties of OVA.

Covalent modification of (+)-catechin to improve the physicochemical, rheological, and oxidative stability properties of rice bran protein emulsion

The aim of this study is the effects of (+)-catechin (CC) covalent cross-linking (CCCI) (0.05-0.25 %, w/v) on the physicochemical properties, rheological properties, and oxidative stability of rice bran protein (RBP) emulsion. Analysis of particle size, ζ-potential, circular dichroism, fluorescence spectroscopy, surface hydrophobicity, and emulsifying properties demonstrated that a concentration of 0.15 % (w/v) CCCI facilitated protein structure unfolding, resulting in reduced particle size, enhanced electrostatic repulsion, and improved emulsion stability. Moreover, the covalent complexes of RBP-0.15 %CC (w/v) exhibited increased viscosity and shear stress, reflected by the highest G' and G″ values, ultimately enhancing the oxidative stability. Furthermore, analysis using atomic force microscopy and confocal laser scanning microscopy revealed that the RBP-0.15 %CC complexes exhibited the smallest particle size (164 nm) and displayed greater homogeneity. An increase in CC concentration to 0.25 % (w/v) resulted in a higher emulsion aggregation. The emulsions stabilized by CCCI exhibited superior rheological properties and enhanced oxidation stability compared to the control. In conclusion, an appropriate amount of CC can enhance the rheology and oxidation stability of the RBP emulsion, while CCCI treatment holds potential for expanding the utility of RBP in various applications.

Influence of different anionic polysaccharide coating on the properties and delivery performance of nanoliposomes for quercetin

Nanoliposome is an effective delivery system for polyphenols, whereas it always suffers from low electrostatic stability and oxidation of lipid membranes. Here, different charged anionic polysaccharides including carrageenan (-62.67 ± 1.85 mV), trehalose (-20.73 ± 1.42 mV), and pectin (-4.47 ± 0.38 mV) were used as coating material to improve the stability of nanoliposomes. Results showed that carrageenan coating greatly inhibited aggregation and fusion of nanoliposome. The coating of the higher charged polysaccharides produced the more hydrogen bonds and made the inner chains of lipid molecules more compact, thus improving the rigidity of the membrane and thermal stability. In addition, the polysaccharide coating effectively reduced the lateral diffusion within the membrane and the propagation rate of oxidation reaction. The aim of this study is to investigate the effect of anionic polysaccharides with different charges on coated nanoliposomes, provide reference for the delivery of quercetin.

Contribution of process-induced molten-globule state formation in duck liver protein to the enhanced binding ability of (E,E)-2,4-heptadienal

BACKGROUND

Extracted proteins of alternative animal origin tend to present strong off-flavor perception due to physicochemical interactions of coextracted off-flavor compounds with proteins. To investigate the relationship between absorption behaviors of volatile aromas and the processes-induced variations in protein microstructures and molecular conformations, duck liver protein isolate (DLp) was subjected to heating (65/100 °C, 15 min) and ultra-high pressure (UHP, 100-500 MPa/10 min, 28 °C) treatments to obtain differential unfolded protein states.

RESULTS

Heat and UHP treatments induced the unfolding of DLp to varied degrees, as revealed by fluorescence spectroscopy, ultraviolet-visible absorption, circular dichroism spectra and surface hydrophobicity measurements. Two types of heating-denatured states with varied unfolding degrees were obtained, while UHP at both levels of 100/500 MPa caused partial unfolding of DLp and the presence of a molten-globule state, which significantly enhanced the binding affinity between DLp and (E,E)-2,4-heptadienal. In particular, significantly modified secondary structures of DLp were observed in heating-denatured samples. Excessive denaturing and unfolding degrees resulted in no significant changes in the absorption behavior of the volatile ligand, as characterized by observations of fluorescence quenching and analysis of headspace concentrations.

CONCLUSION

Defining process-induced conformational transition behavior of matrix proteins could be a promising strategy to regulate food flavor attributes and, particularly, to produce DLp coextracted with limited off-flavor components by modifying their interaction during extraction processes. © 2023 Society of Chemical Industry.

Effects of Heating Treatment on Functional and Structural Properties of Liquid Whole Egg

Liquid whole egg (LWE) products have many advantages such as convenient transportation, easy production and are safe. However, LWE has a short shelf life and high thermal sensitivity, so suitable heating treatment is the key to the production of LWE products. The aim of this study is to investigate the effects of heating treatments conditions (at 55–67 °C for 0–10 min) on the emulsification, foaming activity and rheological properties of LWE. The results indicated that the emulsifying activity of LWE had no significant change after 55–64 °C heating treatment, while it decreased significantly after heating treatment at 67 °C. The foaming property of LWE increased significantly after 55 °C to the 64 °C heating treatment; while the foaming property showed a downward trend with the increase in heat treatment temperature, it can significantly improve the foam stability of LWE. The heating treatment thoroughly changed the molecular weight distribution of LWE protein, thus promoted the protein surface hydrophobicity, hydrophobicity activity and rheological properties. The heating treatment at 61 °C for 6 min had a better effect on the functional properties than that of the other heating groups. In addition, the results of this study provide the change in rules of LWE under different heating treatment conditions and provide theoretical guidance for the production and processing of LWE.

Structural modification of plum (Prunus domestica L) kernel protein isolate by supercritical carbon-dioxide treatment: Functional properties and in-vitro protein digestibility

The effect of supercritical carbon dioxide (SC-CO₂) treatment at different processing temperatures (30-70 °C) on the physico-functional properties, structural features, and in-vitro digestibility (IVPD) of plum kernel protein isolates (PKPI) was examined. The results revealed remarkable changes in the secondary structures of SC-CO₂-treated PKPIs, including a decrease in α-helix proportion, a concomitant increase in β-sheet content, and a considerable variation in random coils and β-turn structures. The temperature rise increased the negative zeta potential to a maximum of 31.35 mV at 60 °C, exhibiting the colloidal stability of PKPI dispersions. SDS-PAGE analysis showed variations in the intensities of protein bands, indicating denaturation and aggregation at higher temperatures. These structural and molecular changes improved water-binding capacity (1.22-fold) and oil binding capacity (1.11-fold), wettability (1.12-fold), and the highest value in all the properties was recorded at 60 °C. Moreover, the highest IVPD value (21.58 %) and a distinguishable colour difference (∆E) of 8.11 was also obtained at 60 °C of the processing temperature. Therefore, SC-CO₂ treatment-induced modification of PKPI contributed to the enhanced digestibility and techno-functional properties, which offered new prospects to extend its use in food applications.

Investigating the Effect of Supercritical Carbon Dioxide Treatment on the Rheological, Thermal, and Functional Properties of Plum (Prunus domestica L.) Kernel Protein Isolates

Plum kernels are a promising source of dietary proteins that are irretrievably lost during processing. The recovery of these underexploited proteins could be eminently vital for human nutrition. Plum kernel protein isolate (PKPI) was prepared and exposed to a targeted supercritical carbon dioxide (SC-CO₂) treatment to diversify its effectiveness in industrial applications. The impacts of SC-CO₂ treatment at different processing temperatures (30-70 °C) on dynamic rheology, microstructure, thermal, and techno-functional characteristics of PKPI were investigated. The results revealed that the dynamic viscoelastic characteristics of SC-CO₂-treated PKPIs showed higher storage modulus, loss modulus, and lower tan δ value than native PKPI, indicating greater strength and elasticity of the gels. Microstructural analysis showed that the proteins experienced denaturation at elevated temperatures and resulted in the formation of soluble aggregates, which increased the heat requirement for thermal denaturation of SC-CO₂-treated samples. SC-CO₂-treated PKPIs demonstrated a decline of 20.74% and 30.5% in crystallite size and crystallinity. PKPIs treated at 60 °C showed the highest dispersibility, which was 1.15-fold higher than the native PKPI sample. SC-CO₂ treatment offers a novel path to improve the techno-functional properties of PKPIs and extend its use in food and non-food applications.

Physicochemical and functional properties of the muscle protein fraction of Hypomesus olidus

The physicochemical and functional properties of myofibrillar protein (MP), sarcoplasmic protein (SP), and myostromin (MY) in Hypomesus olidus muscle were evaluated and reported in this study. These fractions are rich in Glu. Three proteins exhibited significantly different morphologies, colors, and particle sizes. The main protein bands of MP, SP, and MY are 15-220 kDa, 26-60 kDa, and 15-245 kDa, respectively. In particular, MP is more hydrophobic. Three proteins exhibited a maximum UV absorption peak at 270 nm, and all amide I secondary structures were shown to be composed of repetitive units (e.g., α-helices and β-sheets). The three proteins demonstrated a predominantly amorphous halo, with T_d values of 52.22 °C, 59.16 °C, and 58.09 °C. Regarding their properties in water/oil absorption, emulsification, and foaming, MP is the most preferred, followed by SP and MY. In conclusion, Hypomesus olidus muscle proteins are novel and potential functional nutrition ingredients for the food industry.

Effect of Hydrothermal Treatment on the Structure and Functional Properties of Quinoa Protein Isolate

The aim of this study was to investigate the effects of hydrothermal treatment at different temperatures and times on the structure and functional properties of quinoa protein isolate (QPI). The structure of QPI was investigated by analyzing changes in the intrinsic fluorescence spectrum, ultra-violet (UV) spectrum, and Fourier transform infrared spectrum. The solubility, water/oil-holding capacity, emulsifying activity, and emulsion stability of QPI were studied, as were the particle size and the thermogravimetric properties of QPI. The results showed that the average particle size of QPI gradually increased with the increase in hydrothermal treatment time and temperature, and reached a maximum value of 121 °C for 30 min. The surface morphology also became rough and its thermal stability also increased. The endogenous fluorescence and UV spectral intensity at 280 nm decreased gradually with increasing hydrothermal treatment time and temperature, and reduced to the minimum values at 121 °C for 30 min, respectively. After hydrothermal treatment, the secondary structure of QPI tended to be disordered. The functional properties of QPI after treatment were all superior to those of the control. The results of this study might provide a basis for the processing and utilization of QPI.

Heat treatment of quinoa (Chenopodium quinoa Willd.) albumin: Effect on structural, functional, and in vitro digestion properties

Quinoa seeds are rich in protein, polyphenols, phytosterols, and flavonoid substances, and excellent amino acid balance that has been revisited recently as a new food material showing potential applied in fitness and disease prevention. Heat treatment is one of the most effective strategies for improving the physiochemical characteristics of a protein. However, research examining the effects of temperature on quinoa albumin (QA) properties is limited. In this study, QA was subjected to thermal treatment (50, 60, 70, 80, 90, 100, and 121°C). SDS−PAGE revealed that QA is composed of several polypeptides in the 10−40 kDa range. Amino acid (AA) analysis showed that the branched-chain amino acids (BCAAs), negatively charged amino acid residues (NCAAs), and positively charged amino acids (PCAAs) contents of QA were more than double that of the FAO/WHO reference standard. Additionally, heating induced structural changes, including sulfhydryl-disulfide interchange and the exposure of hydrophobic groups. Scanning electron microscopy demonstrated that the albumin underwent denaturation, dissociation, and aggregation during heating. Moreover, moderate heat treatment (60, 70, and 80°C) remarkably improved the functional properties of QA, enhancing its solubility, water (oil) holding capacity, and emulsification and foaming characteristics. However, heating also reduced the in vitro digestibility of QA. Together, these results indicate that heat treatment can improve the structural and functional properties of QA. This information has important implications for optimizing quinoa protein production, and various products related to quinoa protein could be developed. which provides the gist of commercial applications of quinoa seeds for spreading out in the marketplace.

High-Moisture Shear Processes: Molecular Changes of Wheat Gluten and Potential Plant-Based Proteins for Its Replacement

Nowadays, a growing offering of plant-based meat alternatives is available in the food market. Technologically, these products are produced through high-moisture shear technology. Process settings and material composition have a significant impact on the physicochemical characteristics of the final products. Throughout the process, the unfolded protein chains may be reduced, or associate in larger structures, creating rearrangement and cross-linking during the cooling stage. Generally, soy and pea proteins are the most used ingredients in plant-based meat analogues. Nevertheless, these proteins have shown poorer results with respect to the typical fibrousness and juiciness found in real meat. To address this limitation, wheat gluten is often incorporated into the formulations. This literature review highlights the key role of wheat gluten in creating products with higher anisotropy. The generation of new disulfide bonds after the addition of wheat gluten is critical to achieve the sought-after fibrous texture, whereas its incompatibility with the other protein phase present in the system is critical for the structuring process. However, allergenicity problems related to wheat gluten require alternatives, hence an evaluation of underutilized plant-based proteins has been carried out to identify those that potentially can imitate wheat gluten behavior during high-moisture shear processing.

Protein by-products: Composition, extraction, and biomedical applications

Significant upsurge in animal by-products such as skin, bones, wool, hides, feathers, and fats has become a global challenge and, if not properly disposed of, can spread contamination and viral diseases. Animal by-products are rich in proteins, which can be used as nutritional, pharmacologically functional ingredients, and biomedical materials. Therefore, recycling these abundant and renewable by-products and extracting high value-added components from them is a sustainable approach to reclaim animal by-products while addressing scarce landfill resources. This article appraises the most recent studies conducted in the last five years on animal-derived proteins' separation and biomedical application. The effort encompasses an introduction about the composition, an overview of the extraction and purification methods, and the broad range of biomedical applications of these ensuing proteins.

Effect of high-intensity ultrasonic treatment on the emulsion of hemp seed oil stabilized with hemp seed protein

In this study, hemp seed oil (HSO) emulsions stabilized with hemp seed protein (HPI) were prepared and treated with high intensity ultrasonic (HIU). The effects of different treatment powers (0, 150, 300, 450, 600 W) on the properties, microstructure and stability of emulsions were investigated. HIU-treated emulsions showed improved emulsifying activity index and emulsifying stability index, reduced particle size, and increased absolute values of ζ-potential, with the extreme points of these indices occurring at a treatment power of 450 W. Here, the emulsion showed the best dispersion and the smallest particle size in fluorescence microscopy observation, with the highest adsorbed protein content (30.12%), and the highest tetrahydrocannabinol (THC) retention rate (87.64%). The best thermal and oxidative stability of the emulsions were obtained under HIU treatment with a power of 450 W. The D₄₃ and the peroxide values (POV) values after 30 d storage were the smallest at 985.74 ± 64.89 nm and 4.6 μmol/L, respectively. Therefore, 450 W was optimal HIU power to effectively improve the properties of HPI-stabilized HSO emulsion and promote the application of HSO and its derivatives in food processing production.

Tracking aggregation behaviour and gel properties induced by structural alterations in myofibrillar protein in mirror carp (Cyprinus carpio) under the synergistic effects of pH and heating

The synergistic effect of pH and heating on the structure, aggregation behaviour and gel properties of myofibrillar protein (MP) in mirror carp (Cyprinus carpio) was evaluated. The surface hydrophobicity of the control at pH 5.0 (143.6 ± 0.3 μg) was significantly higher than that of other samples (P < 0.05). Under the same pH conditions, the decrease in total sulfhydryl content of all samples during the heating process demonstrated that covalent/non-covalent cross-linking occurred between proteins due to heat input. Moreover, the decrease in solubility and the increase in turbidity of all samples verified the fact of MP aggregation, and the changes in the elasticity index (EI) and macroscopic viscosity index (MVI) also indicated a decrease in MP fluidity upon heating treatment. Therefore, the aggregation of MP was affected by pH and heating, and the optimal three-dimensional network structure and gel properties could be formed at pH 6.0 and above 70 °C.

A review on protein extracts from sunflower cake: techno-functional properties and promising modification methods

De-oiled sunflower cake is a sustainable and promising protein source with high phenolic and fiber contents. The cake, which is an industrial by-product has been the subject of many studies investigating various aspects such as protein extraction, functional properties, interaction with other ingredients, and its performance in a wide range of food products. Innovative and conventional techniques of protein extraction from sunflower cake have been investigated to increase extraction yield and improve desired functional characteristics. Modulation of structure of plant-based proteins helps to control their techno-functional properties and widen their applications. Structure modification of proteins by physical methods including ultrasound treatment and gamma irradiation as well as enzymatic and chemical methods has been used to improve the functional properties of sunflower protein. This review collects and critically discusses the available information on techno-functional properties of protein extracts from sunflower cake and how its techno-functional properties can be tailored using various structure modification methods.

Influence of organic solvents in the extraction and purification of torularhodin from Sporobolomyces ruberrimus

OBJECTIVE

This work aimed at evaluating the influence of organic solvents and stationary phases in the extraction with glass beads and chromatographic purification of carotenoids, especially torularhodin, from Sporobolomyces ruberrimus.

RESULTS

The combinations of acetone:hexane (1:1 v/v) and acetone:ethyl ether (1:1 v/v) yielded 171.74 and 172.19 μg of total carotenoids.g of cells^-1, respectively. The first blend resulted in the highest percent of cell lysis of 57.4%. Among different proportions of acetone:hexane, the 9:1 v/v mixture showed a significant difference (p < 0.05), resulting in a recovery of total carotenoids of 221.88 μg.g of cells^-1. The purification of carotenoids was made by preparative chromatography and the yield of the silica-containing stationary phase was higher (24 μg torularhodin.g cells^-1). The analyses of the purified fractions in thin layer chromatography and high performance liquid chromatography indicated that the purification of carotenoids, especially of torularhodin, was successfully performed.

CONCLUSIONS

The combination of polar (acetone) and non-polar solvents (hexane) and the use of silica as stationary phase was efficient to recover and purify torularhodin from the intracellular pigments of Sporobolomyces ruberrimus.

Influence of processing and pH on amino acid profile, morphology, electrophoretic pattern, bioactive potential and functional characteristics of alfalfa protein isolates

Protein isolates were prepared from wet heat processed (APIp) and unprocessed alfalfa seeds (APIc) and characterized for composition and functionality at different pH. APIc and APIp exhibited high content of all the essential amino acids. Antinutrient content of APIp was lower in comparison to APIc and marked reduction in the trypsin inhibitor (85.97%) and lectin activity (100%) was observed. Processing did not cause much reduction of bioactive constituents and antioxidant activity of APIp. Alfalfa protein isolates exhibited complex polypeptide banding ranging from molecular weight of 11-75 kDa. APIp exhibited change in the conformation of protein discerned as alteration in interrelated nuances of ATR-FTIR spectra, XRD-pattern, morphology, charge on proteins and reduced solubility in comparison to APIc due to processing. APIp exhibited marked improvement in the functional properties in comparison to APIc discerned as improved hydration, surface active and gelation properties. Highest hydration and surface active properties were exhibited at pH 9.0, even though APIp at pH 7.0 showed fairly similar functional properties as APIc and APIp at pH 9.0. APIp exhibited reduced least gelation concentration in comparison to APIc at pH 7.0 and also engendered gelation at pH 4.0 and 9.0 contrary to APIc.

Impact of combined ultrasound-microwave treatment on structural and functional properties of golden threadfin bream (Nemipterus virgatus) myofibrillar proteins and hydrolysates

The effects of microwave, ultrasound and combined ultrasound-microwave (UM) treatment with different intensities on structural and hydrolysis properties of myofibrillar protein (MP) were investigated. Freeradical scavenging ability, angiotensin-I-converting enzyme (ACE) inhibitory activity, and cellular antioxidant and anti-inflammatory abilities of the related bioactive peptides were also evaluated. Raman spectroscopic analysis indicated that MP molecule tended to unfold and stretch with increasing in β-turn and random coil content under mild microwave (100 W), ultrasound (100-200 W) and combined UM treatments. Meanwhile, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) revealed these treatments could also improve the thermal stability against heat-induced denaturation and degeneration. The 200 W ultrasound treatment clearly increased MP solubility by disrupting the highly-ordered aggregates into smaller filament and fragment structures. The 300 W ultrasound coupled with 100 W microwave treatment further enhanced these effects. The resulting partially denatured structure induced by suitable ultrasound and combined UM treatments increased the susceptibility of MP to exogenous enzymes, thereby accelerating hydrolytic process and yielding a high peptide concentration in MP hydrolysates. MP peptides could effectively inhibit free radical and ACE activity, which also improved the ability of antioxidant defence system, and suppressed the production of proinflammatory cytokines in RAW 264.7 cells stimulated by H₂O₂. The combination of 100 W microwave and 300 W ultrasound treatment was optimal method for generating bioactive MP peptides with the strongest multi-activity effects against H₂O₂-induced cell damage.

High-Intensity Ultrasound Treatment on Soy Protein after Selectively Proteolyzing Glycinin Component: Physical, Structural, and Aggregation Properties

In this study, a novel method called selective proteolysis was applied to the glycinin component of soy protein isolate (SPI), and a degraded glycinin hydrolysate (DGH) was obtained. The effects of high-intensity ultrasound (HIU) treatment (20 kHz at 400 W, 0, 5, 20, and 40 min) on the physical, structural, and aggregation properties of DGH were investigated with the aim to reveal the influence of the selectively hydrolyzing glycinin component on the HIU treatment of soy protein. The effects of HIU on DGH and a control SPI (CSPI) were both time-dependent. HIU induced the formation of soluble aggregates in both samples at an early stage, while it dissociated these newly formed aggregates after a longer duration. Selectively hydrolyzing glycinin contributed to the soluble aggregation by exposing the compact protein structure and producing small protein fractions. The larger extent of hydrophobic interactions and disulfide bonds imparted a higher stability to the soluble protein aggregates formed in DGH. As a result, DGH displayed more ordered secondary structures, a higher solubility, and better gelling properties after the HIU treatment, especially at 20 min. The results of this study will be beneficial to the scientific community as well as industrial application.