1
|
Zhao N, Guo C, Liu Z, Chen L, Hu Y, Han M, Huang F, Kang Z, Feng X. Effects of different hydrocolloids on the 3D printing and thermal stability of chicken paste. Int J Biol Macromol 2024:134006. [PMID: 39032898 DOI: 10.1016/j.ijbiomac.2024.134006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2024] [Revised: 07/09/2024] [Accepted: 07/17/2024] [Indexed: 07/23/2024]
Abstract
This study investigated the effect of different hydrocolloids on the improvement of the printability and post-processing stability of minced chicken meat, each hydrocolloid was prepared with 1 % formulation and compared with the control. The effects of these hydrocolloids on the rheological properties of chicken mince and complex model printing capability were explored separately, while the cooking loss and microstructure changes of the samples before and after heating were analyzed. The results showed that the chicken mince gel containing carrageenan was more suitable for printing, increased the yield stress and apparent viscosity of the samples, and the printing process was easier to mold. In addition, carrageenan increased the hardness of the samples, and the microstructures were compact and changed little during the heating process, and the water was locked in the gel matrix, reducing shape changes during the heating process. The use of hydrocolloids improves the stability of post-processing of chicken 3D printing.
Collapse
Affiliation(s)
- Nanqi Zhao
- College of Food Science and Engineering, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi 712100, China
| | - Chaofan Guo
- Faculty of Food Science and Engineering, Kunming University of Science and Technology, Kunming 650500, China
| | - Ziyao Liu
- College of Food Science and Engineering, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi 712100, China
| | - Lin Chen
- College of Food Science and Engineering, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi 712100, China.
| | - Yayun Hu
- College of Food Science and Engineering, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi 712100, China
| | - Minyi Han
- Lab of Meat Processing and Quality Control of EDU, College of Food Science and Technology, Synergetic Innovation Center of Food Safety and Nutrition, Nanjing Agricultural University, Nanjing, Jiangsu 210095, China
| | - Feng Huang
- Institute of Food Science and Technology CAAS, Beijing 100193, China
| | - Zhuangli Kang
- School of Food Science, Henan Institute of Science and Technology, Xinxiang 453003, China
| | - Xianchao Feng
- College of Food Science and Engineering, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi 712100, China.
| |
Collapse
|
2
|
Liu Y, Zhang Y, Cai L, Zeng Q, Wang P. Protein and protein-polysaccharide composites-based 3D printing: The properties, roles and opportunities in future functional foods. Int J Biol Macromol 2024; 272:132884. [PMID: 38844274 DOI: 10.1016/j.ijbiomac.2024.132884] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2024] [Revised: 05/31/2024] [Accepted: 06/02/2024] [Indexed: 06/10/2024]
Abstract
The food industry is undergoing a significant transformation with the advancement of 3D technology. Researchers in the field are increasingly interested in using protein and protein-polysaccharide composite materials for 3D printing applications. However, maintaining nutritional and sensory properties while guaranteeing printability of these materials is challenging. This review examines the commonly used protein and composite materials in food 3D printing and their roles in printing inks. This review also outlines the essential properties required for 3D printing, including extrudability, appropriate viscoelasticity, thixotropic properties, and gelation properties. Furthermore, it explores the wide range of potential applications for 3D printing technology in novel functional foods such as space food, dysphagia food, kid's food, meat analogue, and other specialized food products.
Collapse
Affiliation(s)
- Yi Liu
- School of Food Science and Biotechnology, Zhejiang Gongshang University, Hangzhou 310018, China
| | - Yue Zhang
- School of Food Science and Biotechnology, Zhejiang Gongshang University, Hangzhou 310018, China.
| | - Lei Cai
- School of Food Science and Biotechnology, Zhejiang Gongshang University, Hangzhou 310018, China
| | - Qinglin Zeng
- FooodLab (Hangzhou) Technology Co., Ltd, Hangzhou 310024, China
| | - Pengrui Wang
- FooodLab (Hangzhou) Technology Co., Ltd, Hangzhou 310024, China.
| |
Collapse
|
3
|
Huang J, Zhang M, Mujumdar AS, Li C. Modulation of starch structure, swallowability and digestibility of 3D-printed diabetic-friendly food for the elderly by dry heating. Int J Biol Macromol 2024; 264:130629. [PMID: 38453112 DOI: 10.1016/j.ijbiomac.2024.130629] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2024] [Revised: 02/24/2024] [Accepted: 03/03/2024] [Indexed: 03/09/2024]
Abstract
Elderly people often experience difficulty in swallowing and have impaired regulation of the nervous system. Furthermore, their blood glucose level can rise easily after eating. Therefore, functional foods that are easy to swallow and can maintain blood glucose at a lower level have been an important research topic in recent years. In this study, 3D printing was combined with dry heating to modify the starch in white quinoa and brown rice to develop whole grain foods with Osmanthus flavor that meet the dietary habits of the elderly. The samples were tested for printability, swallowing performance, and in vitro digestion. The results showed that after dry heating, all samples had shear-thinning properties and could pass through the extrusion nozzle of the printer smoothly. Both white quinoa and brown rice showed improved printability and self-support compared to the control. B45 (white quinoa, dry heating for 45 min) and C45 (brown rice, dry heating for 45 min) had significant elasticity and greater internal interaction strength during swallowing to resist disintegration of food particles during chewing. B45, C30, and C45, conformed to class 4 consistency and were characterized by easy swallowing of the diet. Further, dry heating resulted in greater resistance to enzymatic degradation of white quinoa and brown rice starch, with overall in vitro digestibility lower than the control.
Collapse
Affiliation(s)
- Jinjin Huang
- State Key Laboratory of Food Science and Technology, Jiangnan University, 214122 Wuxi, Jiangsu, China; International Joint Laboratory on Food Safety, Jiangnan University, 214122 Wuxi, Jiangsu, China
| | - Min Zhang
- State Key Laboratory of Food Science and Technology, Jiangnan University, 214122 Wuxi, Jiangsu, China; Jiangsu Province International Joint Laboratory on Fresh Food Smart Processing and Quality Monitoring, Jiangnan University, 214122 Wuxi, Jiangsu, China.
| | - Arun S Mujumdar
- Department of Bioresource Engineering, Macdonald Campus, McGill University, Quebec, Canada
| | - Chunli Li
- State Key Laboratory of Food Science and Technology, Jiangnan University, 214122 Wuxi, Jiangsu, China; Jiangsu Province International Joint Laboratory on Fresh Food Smart Processing and Quality Monitoring, Jiangnan University, 214122 Wuxi, Jiangsu, China
| |
Collapse
|
4
|
Ma J, Liu X, Wang K, Jin Y, Liu Y. New insight into yolk sphere microgel structure impacted by lipid and protein distribution changing under heating processing. Food Chem 2024; 435:137520. [PMID: 37774629 DOI: 10.1016/j.foodchem.2023.137520] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/16/2023] [Revised: 08/03/2023] [Accepted: 09/15/2023] [Indexed: 10/01/2023]
Abstract
The gel structure of boiled, shelled egg yolk is formed by the accumulation of yolk spheres, which are rich in lipids and proteins, and investigating the properties of the lipid-protein complex gel structure of the yolk sphere under heating is important. In this study, we used SEM and CLSM to confirm lipid migration and protein aggregation. We observed that during the heating process, the thermal stability decreased, and there was an increase in the content of β-turns and the degrees of freedom of water and lipids. G' increased during the frequency sweep but decreased after heating for 120 min. The various yolk gel structures exhibited varying degrees of resistance to compression from external forces. Prolonged heating resulted in the presence of gaps and increased surface roughness of the spheres. In conclusion, heating induced lipid migration and protein aggregation in the sphere microgels, thereby altering the structural properties of the gels.
Collapse
Affiliation(s)
- Jiaxuan Ma
- National Research and Development Center for Egg Processing, College of Food Science and Technology, Huazhong Agricultural University, Wuhan, Hubei 430070, PR China
| | - Xiaoli Liu
- National Research and Development Center for Egg Processing, College of Food Science and Technology, Huazhong Agricultural University, Wuhan, Hubei 430070, PR China
| | - Keshan Wang
- Guizhou Province Key Laboratory of Agricultural and Animal Products Storage and Processing, College of Liquor and Food Engineering, Guizhou University, Guiyang 550025, PR China
| | - Yongguo Jin
- National Research and Development Center for Egg Processing, College of Food Science and Technology, Huazhong Agricultural University, Wuhan, Hubei 430070, PR China.
| | - Yuanyuan Liu
- Guizhou Province Key Laboratory of Agricultural and Animal Products Storage and Processing, College of Liquor and Food Engineering, Guizhou University, Guiyang 550025, PR China.
| |
Collapse
|
5
|
Jeon EY, Kim Y, Yun HJ, Kim BK, Choi YS. 3D Printing of Materials and Printing Parameters with Animal Resources: A Review. Food Sci Anim Resour 2024; 44:225-238. [PMID: 38764513 PMCID: PMC11097027 DOI: 10.5851/kosfa.2023.e73] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2023] [Revised: 11/10/2023] [Accepted: 11/13/2023] [Indexed: 05/21/2024] Open
Abstract
3D printing technology enables the production of creative and personalized food products that meet consumer needs, such as an attractive visual appearance, fortification of specific nutrients, and modified textures. To popularize and diversify 3D-printed foods, an evaluation of the printing feasibility of various food pastes, including materials that cannot be printed natively, is necessary. Most animal resources, such as meat, milk, and eggs, are not inherently printable; therefore, the rheological properties governing printability should be improved through pre-/post-processing or adding appropriate additives. This review provides the latest progress in extrusion-based 3D printing of animal resource-based inks. In addition, this review discusses the effects of ink composition, printing conditions, and post-processing on the printing performance and characteristics of printed constructs. Further research is required to enhance the sensory quality and nutritional and textural properties of animal resource-based printed foods.
Collapse
Affiliation(s)
- Eun Young Jeon
- Research Group of Food Processing, Korea
Food Research Institute, Wanju 55365, Korea
| | - Yuri Kim
- Research Group of Food Processing, Korea
Food Research Institute, Wanju 55365, Korea
| | - Hyun-Jung Yun
- Research Group of Food Processing, Korea
Food Research Institute, Wanju 55365, Korea
| | - Bum-Keun Kim
- Research Group of Food Processing, Korea
Food Research Institute, Wanju 55365, Korea
- Department of Food Biotechnology,
University of Science and Technology, Daejeon 34113,
Korea
| | - Yun-Sang Choi
- Research Group of Food Processing, Korea
Food Research Institute, Wanju 55365, Korea
| |
Collapse
|
6
|
Wen Y, Che QT, Wang S, Park HJ, Kim HW. Elaboration of dimensional quality in 3D-printed food: Key factors in process steps. Compr Rev Food Sci Food Saf 2024; 23:e13267. [PMID: 38284586 DOI: 10.1111/1541-4337.13267] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2023] [Revised: 09/09/2023] [Accepted: 10/17/2023] [Indexed: 01/30/2024]
Abstract
Three-dimensional (3D) printing has been applied to produce food products with intricate and fancy shapes. Dimensional quality, such as dimensional stability, surface smoothness, shape fidelity, and resolution, are essential for the attractive appearance of 3D-printed food. Various methods have been extensively studied and proposed to control the dimensional quality of printed foods, but few papers focused on comprehensively and deeply summarizing the key factors of the dimensional quality of printed products at each stage-before, during, and after printing-of the 3D printing process. Therefore, the effects of pretreatment, printing parameters and rheological properties, and cooking and storage on the dimensional quality of the printed foods are summarized, and solutions are also provided for improving the dimensional quality of the printed products at each step. Before printing, incorporating additives or applying physical, chemical, or biological pretreatments can improve the dimensional quality of carbohydrate-based, protein-based, or lipid-based printed food. During printing, controlling the printing parameters and modifying the rheological properties of inks can affect the shape of printed products. Furthermore, post-processing is essential for some printed foods. After printing, changing formulations, incorporating additives, and selecting post-processing methods and conditions may help achieve the desired shape of 3D-printed or 4D-printed products during cooking. Additives help in the storage stability of printed food. Finally, various opportunities have been proposed to regulate the dimensional properties of 3D-printed structures. This review provides detailed guidelines for researchers and users of 3D printers to produce various printed foods with the desired shapes and appearances.
Collapse
Affiliation(s)
- Yaxin Wen
- College of Biological Science and Engineering, Fuzhou University, Fuzhou, Fujian, China
- Department of Biotechnology, College of Life Science and Biotechnology, Korea University, Seoul, Republic of Korea
| | - Quang Tuan Che
- Department of Biotechnology, College of Life Science and Biotechnology, Korea University, Seoul, Republic of Korea
| | - Shaoyun Wang
- College of Biological Science and Engineering, Fuzhou University, Fuzhou, Fujian, China
| | - Hyun Jin Park
- Department of Biotechnology, College of Life Science and Biotechnology, Korea University, Seoul, Republic of Korea
| | - Hyun Woo Kim
- Department of Biotechnology, College of Life Science and Biotechnology, Korea University, Seoul, Republic of Korea
| |
Collapse
|
7
|
Li H, Liu M, Li J, Zhang X, Zhang H, Zheng L, Xia N, We I A, Hua S. 3D Printing of smart labels with curcumin-loaded soy protein isolate. Int J Biol Macromol 2024; 255:128211. [PMID: 37989429 DOI: 10.1016/j.ijbiomac.2023.128211] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 10/25/2023] [Accepted: 11/15/2023] [Indexed: 11/23/2023]
Abstract
A two-step method for preparing smart labels that can monitor food freshness through color change is presented. The conventional casting method for such labels is not cost-effective, as it uses organic solvents and requires additional cutting processes. Our method is more eco-friendly and customizable, as it uses water as the sole solvent and 3D printing as the fabrication technique. First, curcumin was encapsulated with soy protein isolate (SPI) by a pH-driven method involving hydrogen bonding and hydrophobic interactions. Subsequently, the SPI-curcumin complex was blended with gelatin to create a printable ink. The ink has suitable rheological properties for extrusion, with a yield stress of 400-600 Pa and a viscosity of 122.93-142.82 Pa·s at the optimal printing temperature. The complex modulus of the ink increases to above 2 × 103 Pa when cooled to 25 °C, indicating rapid gel formation. The application of these smart labels to minced meat demonstrated their ability to reflect its freshness by transitioning from yellow to red. Furthermore, the printability and mechanical properties of the labels can be adjusted by changing the glycerol/water ratio. This innovative approach is a promising solution for producing environmentally friendly and customizable smart labels for food freshness monitoring.
Collapse
Affiliation(s)
- Hanyu Li
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China
| | - Mengzhuo Liu
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China
| | - Jinghong Li
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China
| | - Xiaohan Zhang
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China
| | - Huajiang Zhang
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China.
| | - Li Zheng
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China.
| | - Ning Xia
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China
| | - Afeng We I
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China
| | - Shihui Hua
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, PR China
| |
Collapse
|
8
|
Hu G, Liu X, Wu D, Wang B, Wang J, Geng F. Quantitative N-glycoproteomic analysis of egg yolk powder during thermal processing. Food Res Int 2023; 174:113678. [PMID: 37981370 DOI: 10.1016/j.foodres.2023.113678] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2023] [Revised: 11/01/2023] [Accepted: 11/03/2023] [Indexed: 11/21/2023]
Abstract
The production of egg yolk powder often involves critical processes such as pasteurization and spray drying, however, these thermal processes will inevitably affect the functional properties of egg yolk (especially gelation and emulsification). The aim of this study was to elucidate the mechanism of the effect of pasteurized egg yolk (P-EY) and spray-dried egg yolk (SD-EY) on the functional properties through quantitative N-glycoproteomic. The results showed, compared with fresh egg yolk (F-EY), emulsifying property of mild heat-treated P-EY was slightly reduced while the gelation property did not undergo significant changes, whereas emulsifying activity (EAI) and gelation strength of vigorously heat-treated SD-EY were significantly reduced by 48.72 % and 35.73 %, respectively. During thermal processing in SD-EY, larger aggregate particles (particle size ∼10 um) were formed, and the surface hydrophobicity was reduced (93.0 %) and the zeta potential was enhanced (62.8 %). The results of quantitative N-glycoproteomic showed that 13 N-glycosylated proteins (APOB, vitellogenin, etc.) were down-regulated while only 2 N-glycosylated proteins were up-regulated; 21 N-glycosylation sites were down-regulated and 2 N-glycosylation sites were up-regulated in SD-EY, suggesting that covalent cross-linking of protein N-glycoproteins may have occurred in the process of spray-drying, which altered molecular physicochemical characteristics of the yolk solution that further affecting the processing properties of egg yolk.
Collapse
Affiliation(s)
- Gan Hu
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, No. 2025 Chengluo Avenue, Chengdu 610106, China; Institute for Advanced Study, Chengdu University, No. 2025 Chengluo Avenue, Chengdu 610106, China
| | - Xialei Liu
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, No. 2025 Chengluo Avenue, Chengdu 610106, China
| | - Di Wu
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, No. 2025 Chengluo Avenue, Chengdu 610106, China
| | - Beibei Wang
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, No. 2025 Chengluo Avenue, Chengdu 610106, China; Institute for Advanced Study, Chengdu University, No. 2025 Chengluo Avenue, Chengdu 610106, China
| | - Jinqiu Wang
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, No. 2025 Chengluo Avenue, Chengdu 610106, China
| | - Fang Geng
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, No. 2025 Chengluo Avenue, Chengdu 610106, China.
| |
Collapse
|
9
|
Yu Q, Chi Y, Chi Y. Interventional effect of compound sugar and salt on the thermal instability behavior of liquid egg yolk. J Food Sci 2023; 88:5108-5121. [PMID: 37889108 DOI: 10.1111/1750-3841.16792] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2023] [Revised: 09/12/2023] [Accepted: 09/25/2023] [Indexed: 10/28/2023]
Abstract
In this study, the influence of compound sugar (glucose, sucrose, trehalose, and arabinose) and compound sugar and salt (glucose, sucrose, trehalose, arabinose, and NaCl) on the thermal stability of heat-treated liquid egg yolk was explored. The results showed that the addition of 4% compound sugar or 4% compound sugar salt could significantly enhance the heat resistance of liquid egg yolk and increase the denaturation temperature of liquid egg yolk to above 77°C. Moreover, the addition of sugar and salt could improve the functional properties of liquid egg yolk to varying degrees, allowing it to maintain excellent emulsification and soluble protein content after heat treatment. Further analysis using Fourier transform infrared spectroscopy showed that the increase in α-helix content in liquid egg yolk treated with sugar salt also contributes to improving the thermal stability of egg yolk. The method of inhibiting egg yolk aggregation caused by heat treatment provided in this study provides a selective method and theoretical basis for the commercial production of heat-resistant liquid egg yolk.
Collapse
Affiliation(s)
- Qian Yu
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang, China
| | - Yujie Chi
- College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang, China
| | - Yuan Chi
- College of Engineering, Northeast Agricultural University, Harbin, Heilongjiang, China
| |
Collapse
|
10
|
Milc K, Oerther T, Dijksman JA, van Duynhoven JPM, Terenzi C. Capillary Flow-MRI: Quantifying Micron-Scale Cooperativity in Complex Dispersions. Anal Chem 2023; 95:15162-15170. [PMID: 37796921 PMCID: PMC10585662 DOI: 10.1021/acs.analchem.3c01108] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/13/2023] [Accepted: 09/26/2023] [Indexed: 10/07/2023]
Abstract
Strongly confined flow of particulate fluids is encountered in applications ranging from three-dimensional (3D) printing to the spreading of foods and cosmetics into thin layers. When flowing in constrictions with gap sizes, w, within 102 times the mean size of particles or aggregates, d, structured fluids experience enhanced bulk velocities and inhomogeneous viscosities, as a result of so-called cooperative, or nonlocal, particle interactions. Correctly predicting cooperative flow for a wide range of complex fluids requires high-resolution flow imaging modalities applicable in situ to even optically opaque fluids. To this goal, we here developed a pressure-driven high-field magnetic resonance imaging (MRI) velocimetry platform, comprising a pressure controller connected to a capillary. Wall properties and diameter could be modified respectively as hydrophobic/hydrophilic, or within w ∼ 100-540 μm. By achieving a high spatial resolution of 9 μm, flow cooperativity length scales, ξ, down to 15 μm in Carbopol with d ∼ 2 μm could be quantified by means of established physical models with an accuracy of 13%. The same approach was adopted for a heterogeneous fat crystal dispersion (FCD) with d and ξ values up to an order of magnitude higher than those for Carbopol. We found that for strongly confined flow of Carbopol in the 100 μm capillary, ξ is independent of flow conditions. For the FCD, ξ increases with gap size and applied pressures over 0.25-1 bar. In both samples, nonlocal interactions span domains up to about 5-8 particles but, at the highest confinement degree explored, ∼8% for FCD, domains of only ∼2 particles contribute to cooperative flow. The developed flow-MRI platform is easily scalable to ultrahigh field MRI conditions for chemically resolved velocimetric measurements of, e.g., complex fluids with anisotropic particles undergoing alignment. Future potential applications of the platform encompass imaging extrusion under confinement during the 3D printing of complex dispersions or in in vitro vascular and perfusion studies.
Collapse
Affiliation(s)
- Klaudia
W. Milc
- Laboratory
of Biophysics, Wageningen University, 6708 WE Wageningen, The Netherlands
| | | | - Joshua A. Dijksman
- Physical
Chemistry and Soft Matter, Wageningen University, 6708 WE Wageningen, The Netherlands
- Van
der Waals-Zeeman Institute, University of
Amsterdam, 1098 XH Amsterdam, The Netherlands
| | - John P. M. van Duynhoven
- Laboratory
of Biophysics, Wageningen University, 6708 WE Wageningen, The Netherlands
- Unilever
Foods Innovation Centre Hive, 6708 WH Wageningen, The Netherlands
| | - Camilla Terenzi
- Laboratory
of Biophysics, Wageningen University, 6708 WE Wageningen, The Netherlands
| |
Collapse
|
11
|
Wang Y, Liu Q, Yang Y, Qiu C, Jiao A, Jin Z. Impact of pH on pea protein-hydroxypropyl starch hydrogel based on interpenetrating network and its application in 3D-printing. Food Res Int 2023; 170:112966. [PMID: 37316054 DOI: 10.1016/j.foodres.2023.112966] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/04/2022] [Revised: 04/05/2023] [Accepted: 05/11/2023] [Indexed: 06/16/2023]
Abstract
Improving the mechanical and 3D printing performance of pea protein (PeaP) hydrogels contributes to the development of innovative plant-based gel products. Herein, we proposed a strategy for constructing PeaP-hydroxypropyl starch (HPS) interpenetrating network hydrogels, in which the structure, strength, and 3D printing properties of the hydrogels were regulated by changing pH. Results showed that pH significantly affected the gelation process of PeaP/HPS hydrogels. The hydrogels formed a lamellar structure at pH 3, a granule aggregation network structure at pH 5, porous structures at pH 7 and 9, and a honeycomb structure at pH 11. The strength of hydrogels formed at different pH values had the following order: pH 3 >pH 11 > pH 7 >pH 9 >pH 5. The storage modulus (G') of the hydrogel at pH 3 was up to 4149 Pa, but only 695 Pa at pH 5. Moreover, hydrogel at pH 3 had the best self-recovery of 55%. 3D printed objects from gel inks at pH 3 exhibited high structural integrity and fidelity at 60 °C. Gelling force analysis indicated hydrogen bonds were the dominant interaction within all hydrogels. Overall, this study suggested that PeaP/HPS hydrogel formed at pH 3 possessed the most excellent mechanical properties and 3D printing capabilities, which may provide insights into the development of novel PeaP-based gel food ingredients and promote the application of PeaP in the food industry.
Collapse
Affiliation(s)
- Yihui Wang
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China; School of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China
| | - Qing Liu
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China; School of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China
| | - Yueyue Yang
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China; School of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China
| | - Chao Qiu
- School of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China
| | - Aiquan Jiao
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China; School of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China; Collaborative Innovation Center of Food Safety and Quality Control in Jiangsu Province, Jiangnan University, Wuxi 214122, China
| | - Zhengyu Jin
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China; School of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu Province 214122, China; Collaborative Innovation Center of Food Safety and Quality Control in Jiangsu Province, Jiangnan University, Wuxi 214122, China.
| |
Collapse
|
12
|
Luo W, Wang J, Chen Y, Zhang Q, Wang J, Geng F. Quantitative Lipidome Analysis of Boiled Chicken Egg Yolk under Different Heating Intensities. Molecules 2023; 28:4601. [PMID: 37375157 DOI: 10.3390/molecules28124601] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2023] [Revised: 06/05/2023] [Accepted: 06/05/2023] [Indexed: 06/29/2023] Open
Abstract
The effects of the four heating intensities (hot-spring egg yolk, HEY; soft-boiled egg yolk, SEY; normal-boiled egg yolk, NEY; and over-boiled egg yolk, OEY) on lipidomes of boiled egg yolks were investigated. The results indicated that four heating intensities had no significant effect on the total abundance of lipids and lipid categories except for bile acids, lysophosphatidylinositol, and lysophosphatidylcholine. However, of all the 767 lipids quantified, the differential abundance of 190 lipids was screened among the egg yolk samples at four heating intensities. Soft-boiling and over-boiling altered the assembly structure of the lipoproteins through thermal denaturation and affected the binding of lipids and apoproteins, resulting in an increase in low-to-medium-abundance triglycerides. The decreased phospholipid and increased lysophospholipid and free fatty acid in HEY and SEY suggests potential hydrolysis of phospholipids under relatively low-intensity heating. Results provide new insights into the effect of heating on the lipid profiles of egg yolk and would support the public's choice of cooking method for egg yolks.
Collapse
Affiliation(s)
- Wei Luo
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, Chengdu 610106, China
| | - Jinghui Wang
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, Chengdu 610106, China
| | - Yan Chen
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, Chengdu 610106, China
| | | | - Jinqiu Wang
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, Chengdu 610106, China
| | - Fang Geng
- Institute for Egg Science and Technology, School of Food and Biological Engineering, Chengdu University, Chengdu 610106, China
| |
Collapse
|
13
|
The thermal behavior of egg yolk involves lipoprotein instability. J FOOD ENG 2023. [DOI: 10.1016/j.jfoodeng.2022.111370] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
14
|
Liu S, Niu L, Tu J, Xiao J. The alleviative effect of curdlan on the quality deterioration of konjac glucomannan thermo-irreversible gels after commercial sterilization at 121 °C. Int J Biol Macromol 2023; 238:124134. [PMID: 36958457 DOI: 10.1016/j.ijbiomac.2023.124134] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/21/2022] [Revised: 03/17/2023] [Accepted: 03/19/2023] [Indexed: 03/25/2023]
Abstract
This work employed different curdlan concentrations (0.00 %, 1.00 %, 1.50 %, 2.00 %, and 2.50 %) to alleviate the quality degradation of konjac glucomannan (KGM) gels after commercial sterilization at 121 °C for 15 min. The results showed that all levels of curdlan could retard the deterioration of KGM gels, with the best effect at 2.00 %. After commercial sterilization, incorporating curdlan into KGM gels greatly reduced the Tan σ (G"/ G'), total relaxation time and half-free water from 0.52, 89.85 ms and 98.26 % to 0.27, 38.48 ms and 21.42 %, respectively. Moreover, the addition of curdlan imparted a better texture to KGM gels, as reflected in the increase of hardness, springiness, water-holding capacity and whiteness value from 1400.85 g, 0.42, 87.92 % and 33.33 to 3461.68 g, 0.80, 96.50 % and 49.27, respectively. Furthermore, SEM images revealed that curdlan endowed KGM gels with a tighter structure and smaller pores, and the pore size distribution was reduced from 113.46 μm to17.91 μm, indicating a stronger interaction among molecules, as evidenced by XRD and FTIR results. KGM gels with curdlan possessed less proportion of complete crystallites and crystalline region. These findings suggested that curdlan can be the potently protectant for improving the quality of commercially sterilized KGM gel-based products.
Collapse
Affiliation(s)
- Sha Liu
- School of Food Science and Engineering, Jiangxi Agricultural University, 1101 Zhimin Road, Nanchang 330045, China
| | - Liya Niu
- School of Food Science and Engineering, Jiangxi Agricultural University, 1101 Zhimin Road, Nanchang 330045, China
| | - Jin Tu
- School of Food Science and Engineering, Jiangxi Agricultural University, 1101 Zhimin Road, Nanchang 330045, China
| | - Jianhui Xiao
- School of Food Science and Engineering, Jiangxi Agricultural University, 1101 Zhimin Road, Nanchang 330045, China; Key Laboratory of Crop Physiology, Ecology, and Genetic Breeding, Ministry of Education, Jiangxi Agricultural University, Nanchang 330045, China.
| |
Collapse
|
15
|
Bercea M. Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels. Molecules 2023; 28:molecules28062766. [PMID: 36985738 PMCID: PMC10058016 DOI: 10.3390/molecules28062766] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2023] [Revised: 03/12/2023] [Accepted: 03/15/2023] [Indexed: 03/30/2023] Open
Abstract
Over the last decade, efforts have been oriented toward the development of suitable gels for 3D printing, with controlled morphology and shear-thinning behavior in well-defined conditions. As a multidisciplinary approach to the fabrication of complex biomaterials, 3D bioprinting combines cells and biocompatible materials, which are subsequently printed in specific shapes to generate 3D structures for regenerative medicine or tissue engineering. A major interest is devoted to the printing of biomimetic materials with structural fidelity after their fabrication. Among some requirements imposed for bioinks, such as biocompatibility, nontoxicity, and the possibility to be sterilized, the nondamaging processability represents a critical issue for the stability and functioning of the 3D constructs. The major challenges in the field of printable gels are to mimic at different length scales the structures existing in nature and to reproduce the functions of the biological systems. Thus, a careful investigation of the rheological characteristics allows a fine-tuning of the material properties that are manufactured for targeted applications. The fluid-like or solid-like behavior of materials in conditions similar to those encountered in additive manufacturing can be monitored through the viscoelastic parameters determined in different shear conditions. The network strength, shear-thinning, yield point, and thixotropy govern bioprintability. An assessment of these rheological features provides significant insights for the design and characterization of printable gels. This review focuses on the rheological properties of printable bioinspired gels as a survey of cutting-edge research toward developing printed materials for additive manufacturing.
Collapse
Affiliation(s)
- Maria Bercea
- "Petru Poni" Institute of Macromolecular Chemistry, 41-A Grigore Ghica Voda Alley, 700487 Iasi, Romania
| |
Collapse
|
16
|
Identification of candidate genomic regions for egg yolk moisture content based on a genome-wide association study. BMC Genomics 2023; 24:110. [PMID: 36918797 PMCID: PMC10015838 DOI: 10.1186/s12864-023-09221-8] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Accepted: 03/01/2023] [Indexed: 03/15/2023] Open
Abstract
BACKGROUND Eggs represent important sources of protein and are widely loved by consumers. Egg yolk taste is an important index for egg selection, and the moisture content of the egg yolk affects the taste. To understand the molecular mechanism underlying egg yolk moisture content, this study determined the phenotype and heritability of egg yolk water content and conducted a genome-wide association study (GWAS) using a mixed linear model. RESULTS We determined the phenotype and heritability of thermogelled egg yolk water content (TWC) and found that the average TWC was 47.73%. Moreover, significant variations occurred (41.06-57.12%), and the heritability was 0.11, which indicates medium-low heritability. Through the GWAS, 48 single nucleotide polymorphisms (SNPs) related to TWC (20 significantly, 28 suggestively) were obtained, and they were mainly located on chromosomes 10 and 13. We identified 36 candidate genes based on gene function and found that they were mainly involved in regulating fat, protein, and water content and embryonic development. FGF9, PIAS1, FEM1B, NOX5, GLCE, VDAC1, IGFBP7, and THOC5 were involved in lipid formation and regulation; AP3S2, GNPDA1, HSPA4, AP1B1, CABP7, EEF1D, SYTL3, PPP2CA, SKP1, and UBE2B were involved in protein folding and hydrolysis; and CSF2, SOWAHA, GDF9, FSTL4, RAPGEF6, PAQR5, and ZMAT5 were related to embryonic development and egg production. Moreover, MICU2, ITGA11, WDR76, BLM, ANPEP, TECRL, EWSR1, and P4HA2 were related to yolk quality, while ITGA11, WDR76, BLM, and ANPEP were potentially significantly involved in egg yolk water content and thus deserve further attention and research. In addition, this study identified a 19.31-19.92 Mb genome region on GGA10, and a linkage disequilibrium analysis identified strong correlations within this region. Thus, GGA10 may represent a candidate region for TWC traits. CONCLUSION The molecular genetic mechanism involved in TWC was revealed through heritability measurements and GWAS, which identified a series of SNPs, candidate genes, and candidate regions related to TWC. These results provide insights on the molecular mechanism of egg yolk moisture content and may aid in the development of new egg traits.
Collapse
|
17
|
Lv Y, Lv W, Li G, Zhong Y. The research progress of physical regulation techniques in 3D food printing. Trends Food Sci Technol 2023. [DOI: 10.1016/j.tifs.2023.02.004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/10/2023]
|
18
|
Dong H, Wang P, Yang Z, Xu X. 3D printing based on meat materials: Challenges and opportunities. Curr Res Food Sci 2022; 6:100423. [PMID: 36636723 PMCID: PMC9830157 DOI: 10.1016/j.crfs.2022.100423] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/24/2022] [Revised: 12/11/2022] [Accepted: 12/21/2022] [Indexed: 12/24/2022] Open
Abstract
Three-dimensional (3D) printing, as an emerging technology, is driving great progress in the food industry. In the meat field, 3D printing is expected to replace the traditional food industry and solve the problems of raw material waste and food contamination. Nevertheless, the application of 3D printing in meat still faces many challenges. The rheological properties of the ink, such as shear thinning behavior, viscosity, and yield stress, are critical in determining whether it can be printed smoothly and ensuring the quality of the product. Meat materials are complex multi-phase colloidal systems with unique fibrous structures that cannot be printed directly, and improving the printability of meat colloids mainly limits meat printing. The complexity of meat colloidal systems determines the different heat requirements. In addition, at this stage, the functionality of the printer and the formulation of a single nutritional and organoleptic properties limit the implementation and application of 3D printing. Moreover, the development of cultured meat, the full application of by-products, and the emergence of new technologies provides opportunities for the application of 3D printing in the meat industry. This review highlights the current challenges and opportunities for the application of 3D printing in meat to provide new ideas for the development of 3D printing.
Collapse
|
19
|
Kadival A, Kour M, Meena D, Mitra J. Extrusion-Based 3D Food Printing: Printability Assessment and Improvement Techniques. FOOD BIOPROCESS TECH 2022. [DOI: 10.1007/s11947-022-02931-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
20
|
Improvement of extrudability and self-support of emulsion-filled starch gel for 3D printing: Increasing oil content. Carbohydr Polym 2022; 301:120293. [DOI: 10.1016/j.carbpol.2022.120293] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2022] [Revised: 10/28/2022] [Accepted: 10/29/2022] [Indexed: 11/06/2022]
|
21
|
|
22
|
Suhag R, Dhiman A, Prabhakar PK, Sharma A, Singh A, Upadhyay A. Microfluidization of liquid egg yolk: Modelling of rheological characteristics and interpretation of flow behavior under a pipe flow. INNOV FOOD SCI EMERG 2022. [DOI: 10.1016/j.ifset.2022.103119] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
23
|
Gao B, Hu X, Xue H, Li R, Liu H, Han T, Tu Y, Zhao Y. The changes of umami substances and influencing factors in preserved egg yolk: pH, endogenous protease, and proteinaceous substance. Front Nutr 2022; 9:998448. [PMID: 36225876 PMCID: PMC9549109 DOI: 10.3389/fnut.2022.998448] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/20/2022] [Accepted: 09/05/2022] [Indexed: 11/13/2022] Open
Abstract
The study investigated the changes of nucleotides, succinic acid, and free amino acids amounts in yolk and the causes leading to the changes after pickling to uncover the fundamental umami component of preserved egg yolk. The findings demonstrated that while the contents of 5′-adenosine monophosphate (AMP), 5′-cytidine monophosphate (CMP), 5′-guanosine monophosphate (GMP), 5′-uridine monophosphate (UMP), and succinic acid increased after slightly decreasing aspartic acid (Asp) content in preserved egg yolk increased gradually. The contents of 5′-inosine monophosphate (IMP) and other free amino acids were gradually decreased. Comparing the taste activity value (TAV), it was found that the single umami substance, succinic acid, played a key role in inducing the umami taste. In combination with the Spearman correlation analysis, it was shown that the proteinaceous substance, which is the most significant umami component in preserved egg yolk, tended to condense first and subsequently disintegrate in an alkaline environment. The orthogonal partial least squares analysis (OPLS) found that pH was also affected by the changes in proteinaceous substance. These findings offer suggestions for enhancing the pickling procedure and investigating the optimal pickling period for preserved eggs.
Collapse
Affiliation(s)
- Binghong Gao
- Jiangxi Key Laboratory of Natural Products and Functional Food, Jiangxi Agricultural University, Nanchang, China
- Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University, Nanchang, China
| | - Xiaobo Hu
- State Key Laboratory of Food Science and Technology, Nanchang University, Nanchang, China
| | - Hui Xue
- Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University, Nanchang, China
| | - Ruiling Li
- Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University, Nanchang, China
| | - Huilan Liu
- Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University, Nanchang, China
| | - Tianfeng Han
- Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University, Nanchang, China
| | - Yonggang Tu
- Jiangxi Key Laboratory of Natural Products and Functional Food, Jiangxi Agricultural University, Nanchang, China
| | - Yan Zhao
- Jiangxi Key Laboratory of Natural Products and Functional Food, Jiangxi Agricultural University, Nanchang, China
- *Correspondence: Yan Zhao
| |
Collapse
|
24
|
Yu N, Yang F, Gong H, Zhou J, Jie C, Wang W, Chen X, Sun L. Gel & three-dimensional printing properties of sheep plasma protein-surimi induced by transglutaminase. J FOOD ENG 2022. [DOI: 10.1016/j.jfoodeng.2022.111006] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
|
25
|
Tejada-Ortigoza V, Cuan-Urquizo E. Towards the Development of 3D-Printed Food: A Rheological and Mechanical Approach. Foods 2022; 11:1191. [PMID: 35563914 PMCID: PMC9103916 DOI: 10.3390/foods11091191] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2022] [Revised: 04/10/2022] [Accepted: 04/14/2022] [Indexed: 02/07/2023] Open
Abstract
Additive manufacturing, or 3D printing, has raised interest in many areas, such as the food industry. In food, 3D printing can be used to personalize nutrition and customize the sensorial characteristics of the final product. The rheological properties of the material are the main parameters that impact the 3D-printing process and are crucial to assuring the printability of formulations, although a clear relationship between these properties and printability has not been studied in depth. In addition, an understanding of the mechanical properties of 3D-printed food is crucial for consumer satisfaction, as they are related to the texture of food products. In 3D-printing technologies, each manufacturing parameter has an impact on the resulting mechanical properties; therefore, a thorough characterization of these parameters is necessary prior to the consumption of any 3D-printed food. This review focuses on the rheological and mechanical properties of printed food materials by exploring cutting-edge research working towards developing printed food for personalized nutrition.
Collapse
Affiliation(s)
| | - Enrique Cuan-Urquizo
- Tecnologico de Monterrey, Escuela de Ingeniería y Ciencias, Querétaro 76130, Mexico;
- Laboratorio Nacional de Manufactura Aditiva y Digital (MADIT), Apodaca 66629, Mexico
| |
Collapse
|
26
|
Milc KW, Dijksman JA, van Duynhoven JPM, Terenzi C. Quantifying cooperative flow of fat crystal dispersions. SOFT MATTER 2022; 18:2782-2789. [PMID: 35316311 DOI: 10.1039/d2sm00233g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
We quantify the cooperative flow behaviour of fat crystal dispersions (FCDs) upon varying crystallization conditions. The latter enabled altering the multiscale microstructure of the FCDs, from the nanometer-sized platelets, and the dispersed fractal aggregates, up to the strength of the mesoscopic weak-link network. To the goal of characterizing strongly-confined flow in these optically-opaque materials, we acquire high-resolution rheo-magnetic-resonance-imaging (rheo-MRI) velocimetry measurements using an in-house developed 500 μm gap Couette cell (CC). We introduce a numerical fitting method based on the fluidity model, which yields the cooperativity length, ξ, in the narrow-gap CC. FCDs with aggregates sizes smaller than the confinement size by an order of magnitude were found to exhibit cooperativity effects. The respective ξ values diverged at the yield stress, in agreement with the Kinetic Elasto-Plastic (KEP) theory. In contrast, the FCD with aggregates sizes in the order of the gap size did not exhibit any cooperativity effect: we attribute this result to the correspondingly decreased mobility of the aggregates. We foresee that our optimized rheo-MRI measurement and fitting analysis approach will propel further similar studies of flow of other multi-scale and optically-opaque materials.
Collapse
Affiliation(s)
- Klaudia W Milc
- Laboratory of Biophysics, Wageningen University, Wageningen, The Netherlands.
| | - Joshua A Dijksman
- Physical Chemistry and Soft Matter, Wageningen University, Wageningen, The Netherlands
| | - John P M van Duynhoven
- Laboratory of Biophysics, Wageningen University, Wageningen, The Netherlands.
- Unilever Foods Innovation Centre Hive, Wageningen, The Netherlands
| | - Camilla Terenzi
- Laboratory of Biophysics, Wageningen University, Wageningen, The Netherlands.
| |
Collapse
|
27
|
Ren L, Ma J, Xu W, Lv Y, Tong Q. Stability of low density lipoprotein particles affect the formation of off-flavor in thermal egg yolk. Food Res Int 2022; 154:111029. [DOI: 10.1016/j.foodres.2022.111029] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2021] [Revised: 02/12/2022] [Accepted: 02/15/2022] [Indexed: 11/30/2022]
|
28
|
Feng T, Fan C, Wang X, Wang X, Xia S, Huang Q. Food-grade Pickering emulsions and high internal phase Pickering emulsions encapsulating cinnamaldehyde based on pea protein-pectin-EGCG complexes for extrusion 3D printing. Food Hydrocoll 2022. [DOI: 10.1016/j.foodhyd.2021.107265] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
29
|
Yan B, Zhao Z, Ruan H, Yu X, Zhang N, Zhao J, Zhang H, Chen W, Fan D. 3D food printing curing technology based on gellan gum. J FOOD ENG 2022. [DOI: 10.1016/j.jfoodeng.2022.111036] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
30
|
|
31
|
Portanguen S, Tournayre P, Sicard J, Astruc T, Mirade PS. 3D food printing: Genesis, trends and prospects. FUTURE FOODS 2022. [DOI: 10.1016/b978-0-323-91001-9.00008-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022] Open
|
32
|
Mahdavi S, Amirsadeghi A, Jafari A, Niknezhad SV, Bencherif SA. Avian Egg: A Multifaceted Biomaterial for Tissue Engineering. Ind Eng Chem Res 2021; 60:17348-17364. [PMID: 35317347 PMCID: PMC8935878 DOI: 10.1021/acs.iecr.1c03085] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Most components in avian eggs, offering a natural and environmentally friendly source of raw materials, hold great potential in tissue engineering. An avian egg consists of several beneficial elements: the protective eggshell, the eggshell membrane, the egg white (albumen), and the egg yolk (vitellus). The eggshell is mostly composed of calcium carbonate and has intrinsic biological properties that stimulate bone repair. It is a suitable precursor for the synthesis of hydroxyapatite and calcium phosphate, which are particularly relevant for bone tissue engineering. The eggshell membrane is a thin protein-based layer with a fibrous structure and is constituted of several valuable biopolymers, such as collagen and hyaluronic acid, that are also found in the human extracellular matrix. As a result, the eggshell membrane has found several applications in skin tissue repair and regeneration. The egg white is a protein-rich material that is under investigation for the design of functional protein-based hydrogel scaffolds. The egg yolk, mostly composed of lipids but also diverse essential nutrients (e.g., proteins, minerals, vitamins), has potential applications in wound healing and bone tissue engineering. This review summarizes the advantages and status of each egg component in tissue engineering and regenerative medicine, but also covers their current limitations and future perspectives.
Collapse
Affiliation(s)
- Shahriar Mahdavi
- Burn and Wound Healing Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Armin Amirsadeghi
- Burn and Wound Healing Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
- Department of Chemical Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz 71348-51154, Iran
| | - Arman Jafari
- Department of Chemical Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz 71348-51154, Iran
| | - Seyyed Vahid Niknezhad
- Burn and Wound Healing Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Sidi A. Bencherif
- Department of Chemical Engineering, Northeastern University, Boston, MA 02115, United States
- Department of Bioengineering, Northeastern University, Boston, MA 02115, United States
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02128, United States
| |
Collapse
|
33
|
Liu Y, Sun Q, Wei S, Xia Q, Pan Y, Liu S, Ji H, Deng C, Hao J. LF-NMR as a tool for predicting the 3D printability of surimi-starch systems. Food Chem 2021; 374:131727. [PMID: 34915372 DOI: 10.1016/j.foodchem.2021.131727] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2021] [Revised: 11/05/2021] [Accepted: 11/27/2021] [Indexed: 11/04/2022]
Abstract
In this study, surimi from golden pompanos was mixed with starch to form a surimi-starch system. The water properties, rheological properties, and three-dimensional (3D) printability of the surimi-starch were measured. Cluster analysis results showed that the 3D printability was closely related to the type and addition content of starch, and the water and rheological properties. The low-field nuclear magnetic resonance (LF-NMR) parameters were used to predict 3D printability using polynomial regression models. The correlation coefficients (R2) for 3D printing accuracy and stability were 0.88 and 0.93, and the root mean square error (RMSE) values were 0.20% and 4.59%, respectively. In the verification test, the R2 for the two models were 0.85 and 0.89, and the RMSE values were 0.20% and 1.06%, respectively. The nonlinear surface regression fitting exhibited superior predictive performance. Therefore, LF-NMR is a good non-destructive tool for quickly and accurately predicting the 3D printability of the surimi-starch systems.
Collapse
Affiliation(s)
- Yang Liu
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China
| | - Qinxiu Sun
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China; Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang 524088, China; Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian 116034, China.
| | - Shuai Wei
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China; Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang 524088, China; Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian 116034, China
| | - Qiuyu Xia
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China; Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang 524088, China; Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian 116034, China
| | - Yanmo Pan
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China
| | - Shucheng Liu
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China; Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang 524088, China; Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian 116034, China.
| | - Hongwu Ji
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China; Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang 524088, China; Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian 116034, China
| | - Chujin Deng
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China
| | - Jiming Hao
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang 524088, China
| |
Collapse
|
34
|
Liu FF, Li YQ, Wang CY, Zhao XZ, Liang Y, He JX, Mo HZ. Impact of pH on the physicochemical and rheological properties of mung bean (Vigna radiata L.) protein. Process Biochem 2021. [DOI: 10.1016/j.procbio.2021.10.008] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
35
|
|
36
|
Analyzing the most promising innovations in food printing. Programmable food texture and 4D foods. FUTURE FOODS 2021. [DOI: 10.1016/j.fufo.2021.100093] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/15/2023] Open
|
37
|
Wang R, Ma Y, Zhang L, Zhang Z, Chi Y, Chi Y. Changes in egg yolk gelation behaviour and mechanisms during freezing. Lebensm Wiss Technol 2021. [DOI: 10.1016/j.lwt.2021.112223] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
38
|
Extrusion-Based 3D Food Printing: Technological Approaches, Material Characteristics, Printing Stability, and Post-processing. FOOD ENGINEERING REVIEWS 2021. [DOI: 10.1007/s12393-021-09293-w] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
39
|
Paolillo M, Derossi A, van Bommel K, Noort M, Severini C. Rheological properties, dispensing force and printing fidelity of starchy-gels modulated by concentration, temperature and resting time. Food Hydrocoll 2021. [DOI: 10.1016/j.foodhyd.2021.106703] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
40
|
Derossi A, Bhandari B, Bommel K, Noort M, Severini C. Could 3D food printing help to improve the food supply chain resilience against disruptions such as caused by pandemic crises? Int J Food Sci Technol 2021. [DOI: 10.1111/ijfs.15258] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Affiliation(s)
- Antonio Derossi
- Department of Agriculture, Food Natural resources and Engineering (DAFNE) – University of Foggia Italy
| | - Bhesh Bhandari
- School of Agriculture and Food Science University of Queensland Brisbane QLD Australia
| | - Kjeld Bommel
- Netherlands Organisation for Applied Scientific Research (TNO) The Hague The Netherlands
| | - Martijn Noort
- Wageningen Food & Biobased Research Wageningen The Netherlands
| | - Carla Severini
- Department of Agriculture, Food Natural resources and Engineering (DAFNE) – University of Foggia Italy
| |
Collapse
|
41
|
State-of-the-art of 3D printing technology of alginate-based hydrogels-An emerging technique for industrial applications. Adv Colloid Interface Sci 2021; 293:102436. [PMID: 34023568 DOI: 10.1016/j.cis.2021.102436] [Citation(s) in RCA: 44] [Impact Index Per Article: 14.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2021] [Revised: 04/29/2021] [Accepted: 05/07/2021] [Indexed: 12/19/2022]
Abstract
Recently, three-dimensional (3D) printing (also known as additive manufacturing) has received unprecedented consideration in various fields owing to many advantages compared to conventional manufacturing equipment such as reduced fabrication time, one-step production, and the ability for rapid prototyping. This promising technology, as the next manufacturing revolution and universal industrial method, allows the user to fabricate desired 3D objects using a layer-by-layer deposition of material and a 3D printer. Alginate, a versatile polysaccharide derived from seaweed, is popularly used for this advanced bio-fabrication technique due to its printability, biodegradability, biocompatibility, excellent availability, low degree of toxicity, being a relatively inexpensive, rapid gelation in the presence of Ca2+ divalent, and having fascinating chemical structure. In recent years, 3D printed alginate-based hydrogels have been prepared and used in various fields including tissue engineering, water treatment, food, electronics, and so forth. Due to the prominent role of 3D printed alginate-based materials in diverse fields. So, this review will focus and highlight the latest and most up-to-date achievements in the field of 3D printed alginate-based materials in biomedical, food, water treatment, and electronics.
Collapse
|
42
|
Microwave-induced deformation behaviors of 4D printed starch-based food products as affected by edible salt and butter content. INNOV FOOD SCI EMERG 2021. [DOI: 10.1016/j.ifset.2021.102699] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023]
|
43
|
Kewuyemi YO, Kesa H, Adebo OA. Trends in functional food development with three-dimensional (3D) food printing technology: prospects for value-added traditionally processed food products. Crit Rev Food Sci Nutr 2021; 62:7866-7904. [PMID: 33970701 DOI: 10.1080/10408398.2021.1920569] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
Abstract
One of the recent, innovative, and digital food revolutions gradually gaining acceptance is three-dimensional food printing (3DFP), an additive technique used to develop products, with the possibility of obtaining foods with complex geometries. Recent interest in this technology has opened the possibilities of complementing existing processes with 3DFP for better value addition. Fermentation and malting are age-long traditional food processes known to improve food value, functionality, and beneficial health constituents. Several studies have demonstrated the applicability of 3D printing to manufacture varieties of food constructs, especially cereal-based, from root and tubers, fruit and vegetables as well as milk and milk products, with potential for much more value-added products. This review discusses the extrusion-based 3D printing of foods and the major factors affecting the process development of successful edible 3D structures. Though some novel food products have emanated from 3DFP, considering the beneficial effects of traditional food processes, particularly fermentation and malting in food, concerted efforts should also be directed toward developing 3D products using substrates from these conventional techniques. Such experimental findings will significantly promote the availability of minimally processed, affordable, and convenient meals customized in complex geometric structures with enhanced functional and nutritional values.
Collapse
Affiliation(s)
- Yusuf Olamide Kewuyemi
- School of Tourism and Hospitality, College of Business and Economics, University of Johannesburg, Gauteng, South Africa
| | - Hema Kesa
- School of Tourism and Hospitality, College of Business and Economics, University of Johannesburg, Gauteng, South Africa
| | - Oluwafemi Ayodeji Adebo
- Department of Biotechnology and Food Technology, Faculty of Science, University of Johannesburg, Gauteng, South Africa
| |
Collapse
|
44
|
Zhao Y, Feng F, Yang Y, Xiong C, Xu M, Tu Y. Gelation behavior of egg yolk under physical and chemical induction: A review. Food Chem 2021; 355:129569. [PMID: 33773456 DOI: 10.1016/j.foodchem.2021.129569] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Revised: 02/22/2021] [Accepted: 03/07/2021] [Indexed: 02/08/2023]
Abstract
Gelation is one of the most important functional properties of egg yolk. High content and rich variety of protein and lipid in egg yolk are the material basis of gel formation. The natural structure of proteins in egg yolk is unfolded under treatments such as heat, alkali, salt, etc., thus causing the interactions between protein-protein and protein-lipid and forming the gel. Under different methods of induction, egg yolk is solidified to form different three-dimensional network structures. Different inducing methods exhibit different gel formation mechanisms. In this paper, the gelation behavior of egg yolk and its internal molecular agglomeration mechanism induced by heat, alkali, salt, freezing, high pressure, and salt-heating synergy were reviewed to provide a reference for further studies on the formation mechanisms and product development of egg yolk gel.
Collapse
Affiliation(s)
- Yan Zhao
- Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University, Nanchang 330047, China.
| | - Feng Feng
- Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University, Nanchang 330047, China.
| | - Yuan Yang
- Jiangxi Key Laboratory of Natural Products and Functional Food, Jiangxi Agricultural University, Nanchang 330045, China.
| | - Chunhong Xiong
- Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University, Nanchang 330047, China.
| | - Mingsheng Xu
- Jiangxi Key Laboratory of Natural Products and Functional Food, Jiangxi Agricultural University, Nanchang 330045, China.
| | - Yonggang Tu
- Jiangxi Key Laboratory of Natural Products and Functional Food, Jiangxi Agricultural University, Nanchang 330045, China.
| |
Collapse
|
45
|
Shahbazi M, Jäger H. Current Status in the Utilization of Biobased Polymers for 3D Printing Process: A Systematic Review of the Materials, Processes, and Challenges. ACS APPLIED BIO MATERIALS 2021; 4:325-369. [PMID: 35014287 DOI: 10.1021/acsabm.0c01379] [Citation(s) in RCA: 47] [Impact Index Per Article: 15.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Abstract
Three-dimensional (3D) printing is a revolutionary additive manufacturing technique that allows rapid prototyping of objects with intricate architectures. This Review covers the recent state-of-the-art of biopolymers (protein and carbohydrate-based materials) application in pharmaceutical, bioengineering, and food printing and main reinforcement approaches of biomacromolecular structure for the development of 3D constructs. Some perspectives and main important limitations with the biomaterials utilization for advanced 3D printing procedures are also provided. Because of the improved the ink's flow behavior and enhance the mechanical strength of resulting printed architectures, biopolymers are the most used materials for 3D printing applications. Biobased polymers by taking advantage of modifying the ink viscosity could improve the resolution of deposited layers, printing precision, and consequently, develop well-defined geometries. In this regard, the rheological properties of printable biopolymeric-based inks and factors affecting ink flow behavior related to structural properties of printed constructs are discussed. On the basis of successful applications of biopolymers in 3D printing, it is suggested that other biomacromolecules and nanoparticles combined with the matrix can be introduced into the ink dispersions to enhance the multifunctionality of 3D structures. Furthermore, tuning the biopolymer's structural properties offers the most common and essential approach to attain the printed architectures with precisely tailored geometry. We finish the Review by giving a viewpoint of the upcoming 3D printing process and recognize some of the existing bottlenecks facing the blossoming 3D pharmaceutical, bioengineering, and food printing applications.
Collapse
Affiliation(s)
- Mahdiyar Shahbazi
- Institute of Food Technology, University of Natural Resources and Life Sciences (BOKU), Muthgasse 18, 1190 Vienna, Austria
| | - Henry Jäger
- Institute of Food Technology, University of Natural Resources and Life Sciences (BOKU), Muthgasse 18, 1190 Vienna, Austria
| |
Collapse
|
46
|
Liu Y, Sun Q, Pan Y, Wei S, Xia Q, Liu S, Ji H, Deng C, Hao J. Investigation on the correlation between changes in water and texture properties during the processing of surimi from golden pompano (Trachinotus ovatus). J Food Sci 2021; 86:376-384. [PMID: 33438246 DOI: 10.1111/1750-3841.15581] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/11/2020] [Revised: 12/03/2020] [Accepted: 12/05/2020] [Indexed: 12/28/2022]
Abstract
Water and texture properties are important indicators for evaluating surimi and surimi seafood quality. The present study assessed the impact of surimi processing on the water and texture properties and analyzed their correlations. The results showed that the moisture content exhibited significant positive correlations with T22 and A22 (P < 0.05). However, water-holding capacity (WHC) revealed significant negative correlation with T21 and A22 (P < 0.05). Moreover, correlations between water and texture properties were observed. Moisture content and A22 displayed significant negative correlation with hardness (P < 0.05). WHC exhibited significant positive correlations with cohesiveness, springiness, and chewiness (P < 0.05), whereas T21 exhibited significant negative correlation with those properties (P < 0.05). Springiness is an important indicator for texture properties of surimi gel. T21 and WHC exhibited significant correlations with springiness (P < 0.05). We used two equations to assess the relationship between springiness and T21 (y = 9.64 × x2 - 33.79 × x + 29.62, R2 = 0.995, P < 0.05) and between springiness and WHC (y = 0.57 + 9.05/{1+e[-29.29 × ( x - 83.90)] }0.01 , R2 = 0.999, P < 0.05), respectively. Verification experiments proved that these two regression equations could be used to predict the change law among feature indicators during the processing of surimi seafood. The present study finds an easy-to-control method to monitor the quality of surimi production and processing for all the stages, and provides ideas for quality design of surimi products. PRACTICAL APPLICATION: The quality of surimi seafood is affected by the process used for surimi production. Early detection of the material quality can efficiently prevent resource wastage. The feature indicators and their correlations help in easy-to-control of all surimi processing stages. Low-field nuclear magnetic resonance (LF-NMR) is a fast, nondestructive method for monitoring food real-time, but the instrument is expensive; whereas water-holding capacity and texture profile analysis (TPA) are traditional methods but time-consuming and material-consuming. Surimi enterprises or researchers choose the right methods based on their needs.
Collapse
Affiliation(s)
- Yang Liu
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| | - Qinxiu Sun
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| | - Yanmo Pan
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| | - Shuai Wei
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| | - Qiuyu Xia
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| | - Shucheng Liu
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| | - Hongwu Ji
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| | - Chujin Deng
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| | - Jiming Hao
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Key Laboratory of Advanced Processing of Aquatic Product of Guangdong Higher Education Institution, Zhanjiang, 524088, China.,Collaborative Innovation Center of Seafood Deep Processing, Dalian Polytechnic University, Dalian, 116034, China.,Southern Marine Science and Engineering Guangdong Laboratory (Zhanjiang), Zhanjiang, 524088, China
| |
Collapse
|
47
|
Synergistic effect of microwave 3D print and transglutaminase on the self-gelation of surimi during printing. INNOV FOOD SCI EMERG 2021. [DOI: 10.1016/j.ifset.2020.102546] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
|
48
|
|
49
|
Analyzing the effects of 3D printing process per se on the microstructure and mechanical properties of cereal food products. INNOV FOOD SCI EMERG 2020. [DOI: 10.1016/j.ifset.2020.102531] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
50
|
Formation of egg yolk-modified starch complex and its stabilization effect on high internal phase emulsions. Carbohydr Polym 2020; 247:116726. [DOI: 10.1016/j.carbpol.2020.116726] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/01/2020] [Revised: 07/01/2020] [Accepted: 07/01/2020] [Indexed: 12/12/2022]
|