Mechanisms of removal of heavy metal ions by ZnO particles

Waste for Product-Synthesis and Electrocatalytic Properties of Palladium Nanopyramid Layer Enriched with PtNPs

The presented research is the seed of a vision for the development of a waste-for-product strategy. Following this concept, various synthetic solutions containing low concentrations of platinum group metals were used to model their recovery and to produce catalysts. This is also the first report that shows the method for synthesis of a pyramid-like structure deposited on activated carbon composed of Pd and Pt. This unique structure was obtained from a mixture of highly diluted aqueous solutions containing both metals and chloride ions. The presence of functional groups on the carbon surface and experimental conditions allowed for: the adsorption of metal complexes, their reduction to metal atoms and enabled further hierarchical growth of the metal layer on the carbon surface. During experiments, spherical palladium and platinum nanoparticles were obtained. The addition of chloride ions to the solution promoted the hierarchical growth and formation of palladium nanopyramids, which were enriched with platinum nanoparticles. The obtained materials were characterized using UV-Vis, Raman, IR spectroscopy, TGA, SEM/EDS, and XRD techniques. Moreover, Pd@ROY, Pt@ROY, and Pd-Pt@ROY were tested as possible electrocatalysts for hydrogen evolution reactions.

Excellent adsorption of toxic Cd (II) ions from water with effective antibacterial activity by novel GO-ZnO-curcumin composite

A significant health risk arises from the bioaccumulation of harmful Cd (II) in drinking water. Here, we report the unique Cd (II) remediation from drinking water by using novel GO-ZnO-curcumin composite. The composites were tailored by varying the ratio of GO-ZnO and curcumin. The composites followed Langmuir adsorption isotherm and pseudo-second-order kinetics. ZnO nano-rods were more effective in Cd (II) than ZnO nano-disks. A maximum adsorption capacity of 4580 ± 40 mg/gm was achieved for 21G-B with a removal efficiency of 87.5% at neutral pH under optimized conditions. The removal process was governed by ion exchange and electrostatic attraction, followed by cation exchange capacity (CEC). The lattice parameter increase was detected after adsorption of Cd (II) ions. The regeneration and reusability of the composite was studied. Also, the effect of presence of dyes such as methylene blue on Cd (II) adsorption was noted. The latter had negligible effect on Cd (II) removal efficiency from water. The composite showed high antibacterial activity against B. subtilis and P. aeruginosa with minimum inhibitory concentration (MIC) of 10 ± 0.75 µg/ml and 5 ± 1 µg/ml respectively due to the presence of zinc. Composite stability was confirmed through leaching and thermal gravimetric analysis (TGA) analysis. The study establishes the nanocomposite as a potential material for remediation of hazardous Cd (II) ions from real water samples under neutral conditions.

Iron oxide nanoparticle (Fe3O4 NPs) synthesized from B. subtilis reduced arsenic (as) toxicity in rice (Oryza sativa L.) plant

Arsenic (As) is one of the most important water pollutant of global concern due to its extreme hazard. In the present study, B. subtilis synthesized iron oxide nanoparticles (Fe3O4 NPs) were used for mitigation of harmful metalloid As from the aqueous solution. Initially, the arsenic removal efficiency was tested in a batch culture experiment across various concentrations (5, 10 and 15 ppm) of B. subtilis synthesized Fe3O4 NPs at different pH, time interval and agitation speed. Optimal removal efficiency of As by using B. subtilis synthesized Fe3O4 NPs was observed at pH 7, after 80 min, and with agitation at 200 rpm. Additionally, hydroponic culture experiment was designed to assess B. subtilis synthesized Fe3O4 NPs efficiency in removal of As from As-contaminated water used to irrigate rice plants. Results revealed that B. subtilis synthesized Fe3O4 NPs effectively removed As from the contiminated water and reduced its uptake by the different parts of rice plants (root, shoot and leaf). Furthermore, these B. subtilis synthesized Fe3O4 NPs also reduced the bioaccumulation and enhanced plant tolerance to As, suggesting their potential in mitigating heavy metal toxicity, especially As and promoting plant growth. Thus, this study proposes B. subtilis synthesized Fe3O4 NPs as nano-adsorbents in reducing arsenic toxicity in rice plants.

Utilization of battery waste derived ZnO in the removal of dye from aqueous solution: A waste to wealth approach

Every year a huge amount of zinc carbon batteries is discarded as waste and the management of such waste has become a growing concern all over the world. However, from these waste carbon batteries different kinds of valuable materials could be recovered. On the other hand, different industries discharged large volumes of dye wastewater into the environment which has a profound impact on environment and as well as human health. In this study, ZnO was recovered from the waste carbon batteries through pyrometallurgy process and utilized it for the treatment of methylene blue and methyl orange dye water. The batch adsorption process was carried out to observe the effect of adsorbent dosage, pH, contact time, stirring speed and temperature. Under the obtained optimal conditions adsorption kinetics (Pseudo-first order and pseudo-second order) and adsorption isotherms (Langmuir, Freundlich and Temkin) were analyzed. The results disclosed that 0.5 g and 0.6 g of ZnO showed maximum removal efficiency for MB and MO dye solution (50 ppm) whereas pH 13 and 6 were the optimal for MB and MO respectively. Kinetic studies indicate that both the adsorption processes were pseudo-second order. It was also revealed that based on regression coefficient R2 value the adsorption of MB and MO on ZnO is followed Langmuir model. Furthermore, the findings revealed that the MO adsorption on ZnO is a chemical adsorption process and MB adsorption is a physical adsorption process.

Removal of heavy metal ions with magnetic carbon prepared from corncob biomass

Four novel magnetic-activated carbons (MACs) were prepared, characterised, and used as adsorbents to remove heavy metal ions from wastewater samples. The MACs prepared, are advanced adsorbents for the removal of Hg(II), Cr(III), Cd(II), and Pb(II). The nature of the acid, amount, composition of the MACs, and the remotion time were evaluated in aqueous solutions. The ions removal percentages obtained, under the best conditions, were 93% for Hg(II) and higher than 99% for Pb(II), Cr(III), and Cd(II) (100 mg L-1, initial concentration in solution), with 100 mg of the MAC-3 in HNO3 3 mM. The capacity of the best adsorbent, MAC-3, for removing heavy metals ions Hg(II), Cr(III), Cd(II), and Pb(II) was studied using Langmuir and Freundlich adsorption isotherms under the best condition. The maximum adsorption capacities of Hg(II), Cr(III), Cd(II), and Pb(II) were found to be 10.72, 11.51, 11.49 and 11.49 mg g-1, the values of constants of Freundlich models were 17.98, 26.83, 9.18, and 7.18 mg g-1 respectively. For Hg(II) and Pb(II) the correlation factor (R2) was better for Freundlich model, while Cr(III) and Cd(II) showed better R2 with Langmuir model. Finally, the treatment for the elimination of heavy metal ions was carried out, with wastewater samples of industrial and domestic origin, and used for crop irrigation. The samples were collected in Irrigation District 003, Hidalgo, Mexico. The MAC-3 removes heavy metal ions from the wastewater matrix above 99%.

Cu nanoparticles grafting on the surface of ZnO nanostructures to boost the porosity and surface area for effective removal of manganese ions from aqueous solutions

Designing highly adsorptive materials for wastewater treatment via facile approaches is still challenging. To boost the recovery of heavy metals from wastewater, surface and structure modification are considered a successful route. Herein, we report the design of ZnO nanoparticles by a simple thermal decomposition method followed by grafting Cu nanoparticles (Cu NPs) over the ZnO surface. Cu/ZnO was prepared with different Cu ratios, 0.01 and 1%. It was found that incorporating Cu into ZnO improved the porosity and surface area of ZnO. The adsorption ability of Cu/ZnO compared with bare ZnO was studied towards removing manganese ions from wastewater. The effects of several parameters, such as pH, temperature, contact time, and initial ion concentrations, were studied. The maximum removal of manganese was found at pH 2, 20 °C after 60 min in the presence of 1 g/L adsorbent. The role of Cu grafted on the surface of ZnO was discussed. The rates of adsorption were found to follow the pseudo-second-order model. The results showed better fitting to Freundlich isotherm. The thermodynamic study revealed that the sorption process is spontaneous, exothermic, and favorable at low temperatures. The free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) changes were calculated to predict the nature of adsorption.

Understanding the Effects of Adding Metal Oxides to Polylactic Acid and Polylactic Acid Blends on Mechanical and Rheological Behaviour, Wettability, and Photo-Oxidation Resistance

Biopolymers are of growing interest, but to improve some of their poor properties and performance, the formulation of bio-based blends and/or adding of nanoparticles is required. For this purpose, in this work, two different metal oxides, namely zinc oxide (ZnO) and titanium dioxide (TiO2), at different concentrations (0.5, 1, and 2%wt.) were added in polylactic acid (PLA) and polylactic acid/polyamide 11 (PLA/PA11) blends to establish their effects on solid-state properties, morphology, melt behaviour, and photo-oxidation resistance. It seems that the addition of ZnO in PLA leads to a significant reduction in its rigidity, probably due to an inefficient dispersion in the melt state, while the addition of TiO2 does not penalize PLA rigidity. Interestingly, the addition of both ZnO and TiO2 in the PLA/PA11 blend has a positive effect on the rigidity because of blend morphology refinement and leads to a slight increase in film hydrophobicity. The photo-oxidation resistance of the neat PLA and PLA/PA11 blend is significantly reduced due to the presence of both metal oxides, and this must be considered when designing potential applications. The last results suggest that both metal oxides could be considered photo-sensitive degradant agents for biopolymer and biopolymer blends.

Bio-adsorption of heavy metals from aqueous solution using the ZnO-modified date pits

The bio-adsorption of heavy metals (including Cu2+, Ni2+, and Zn2+) in aqueous solution and also in an industry wastewater using the ZnO-modified date pits (MDP) as the bio-adsorbent are investigated. The fresh and used bio-adsorbents were characterized by FT-IR, SEM, BET, and XRD. The bio-adsorption parameters (including the pH of solution, the particle size of MDP, the shaking speed, the initial concentration of heavy metals, the dosing of MDP, the adsorption time, and the adsorption temperature) were screened and the data were used to optimize the bio-adsorption process and to study the bio-adsorption isotherms, kinetics, and thermodynamics. Two adsorption models (Langmuir isotherm model and Freundlich isotherm model) and three kinetic models (pseudo-first-order model, pseudo-second-order model, and intra-particle diffusion model) were applied to model the experimental data. Results show that the maximum adsorption amount of Cu2+, Ni2+, and Zn2+ on a complete monolayer of MDP are 82.4, 71.9, and 66.3 mg g-1, which are over 4 times of those of date pits-based bio-adsorbents reported in literature. The bio-adsorption of heavy metals on MDP is spontaneous and exothermic, and is regulated by chemical adsorption on the homogeneous and heterogeneous adsorption sites of MDP surface. This work demonstrates an effective modification protocol for improved bio-adsorption performance of the date pits-based bio-adsorbent, which is cheap and originally from a waste.

Photocatalytic Gold Recovery from Industrial Gold Plating Effluent by ZnO Nanoparticles: Optimum Condition and Possible Applications

The comparative study of photocatalytic gold recovery from cyanide-based gold plating solution was explored via commercial and hydrothermally synthesized ZnO nanoparticles (NPs). The effects of hydrothermal temperatures on the properties and photocatalytic activities of synthesized ZnO NPs were investigated. In addition, the effects of operating parameters including types of hole scavenger, concentrations of the best hole scavenger, the initial pH of wastewater, and photocatalyst dosages were examined. The obtained results demonstrated that the commercial ZnO NPs exhibited a higher photocatalytic activity for gold recovery than that of the synthesized ones owing to their good crystal quality and the presence of non-lattice zinc ions and appropriate non-lattice oxygen ions. Via the commercial ZnO NPs, the gold ions were almost completely recovered from the cyanide-based gold plating effluent within 7 h at an initial pH of 11.0 in the presence of 10 vol % C2H5OH and 1.0 g/L of photocatalyst loading with a pseudo-first-order rate constant of 0.2637 h-1. Finally, the resultant gold-decorated ZnO NPs exhibited a higher photocatalytic property for color reduction from industrial wastewater and antibacterial activity than that of fresh ZnO NPs. The results obtained in this study possess benefits and pave the way for waste remediation and management for the plating industries.

Schiff base-functionalized metal-organic frameworks as an efficient adsorbent for the decontamination of heavy metal ions in water

Adsorptive removal of heavy metal ions from water is an energy- and cost-effective water decontamination technology. Schiff base functionalities can be incorporated into the pore cages of metal-organic frameworks (MOFs) via direct synthesis, post-synthetic modification, and composite formation. Such incorporation can efficiently enhance the interactions between the MOF adsorbent and target heavy metal ions to promote the selective adsorption of the latter. Accordingly, Schiff base-functionalized MOFs have great potential to selectively remove a particular metal ion from the aqueous solutions in the presence of coexisting (interfering) metal ions through the binding sites within their pore cages. Schiff base-functionalized MOFs can bind divalent metal ions (e.g., Pb(II), Co(II), Cu(II), Cd (II), and Hg (II)) more strongly than trivalent metal ions (e.g., Cr(III)). The adsorption capacity range of Schiff base-functionalized MOFs for divalent ions is thus much more broad (22.4-713 mg g-1) than that of trivalent metal ions (118-127 mg g-1). To evaluate the adsorption performance between different adsorbents, the two parameters (i.e., adsorption capacity and partition coefficient (PC)) are derived and used for comparison. Further, the possible interactions between the Schiff base sites and the target heavy metal ions are discussed to help understand the associated removal mechanisms. This review delivers actionable knowledge for developing Schiff-base functionalized MOFs toward the adsorptive removal of heavy metal ions in water in line with their performance evaluation and associated removal mechanisms. Finally, this review highlights the challenges and forthcoming research and development needs of Schiff base-functionalized MOFs for diverse fields of operations.

Enhanced antibacterial and anticancer activities of plant extract mediated green synthesized zinc oxide-silver nanoparticles

This study presents a green synthesis approach for the fabrication of zinc oxide-silver nanoparticles (ZnO-Ag-NPs) using Punica granatum fruit peels extract as a natural reducing and stabilizing agent. This eco-friendly method offers a sustainable alternative to conventional methods that often employ toxic or hazardous chemicals. Antibacterial and anti-cancer activities of the green synthesized nanoparticles were then assessed in vitro. X-ray diffraction confirmed the production of ZnO-Ag-NPs with increasing crystallinity in higher pH values. The ZnO-Ag-NPs were found to be agglomerated with spherical Ag-NPs. Fourier Transform Infrared (FTIR) spectra revealed a broad band in ZnO-Ag-NPs ranging from 400-1 to 530 cm-1 with reduced intensity as compared to ZnO-NPs, indicating the formation of Ag-NPs on the surface of ZnO-NPs. The synthesized ZnO-Ag-NPs exhibited potent antibacterial activity against a broad spectrum of bacterial strains, particularly Gram-positive bacteria, with superior inhibition activity compared to ZnO-NPs. Moreover, ZnO-Ag-NPs showed a dose-dependent anti-proliferative effect on colorectal-, lung-, and cervical cancer cells. ZnO-Ag-NPs showed significantly greater efficacy in inhibiting cancer cell growth at a lower concentration of 31.25 μg/mL, compared to ZnO-NPs which required over 500 μg/mL, possibly due to the presence of silver nanoparticles (Ag-NPs). The results obtained from this study demonstrate the potential of green synthesis approaches in the fabrication of therapeutic nanomaterials for cancer treatment, as well as other biomedical applications.

Efficient photodegradation of methyl red dye by kaolin clay supported zinc oxide nanoparticles with their antibacterial and antioxidant activities

Kaolin clay-supported Zinc oxide (ZnO/KC) and ZnO NPs nanoparticles (NPs) were prepared by a chemical reduction process and used for the photodegradation of methyl red (MR) dye as a photocatalyst. Due to the interlayered porous structure of the KC, we achieved an extremely good association between ZnO NPs and KC. The product confirmation was conducted by Scanning electron microscopy (SEM), X-Ray diffraction (XRD), energy dispersive X-Ray (EDX), and Fourier transforms infrared (FTIR). SEM showed the irregular morphology of ZnO NPs, while ZnO/KC NCs were predominately round-shaped. Moreover, in both cases, NPs were present in both dispersed as well as agglomerated forms with an average particle size below 100 nm. The results acquired from photodegradation analyses show that ZnO NPs and ZnO/KC NCs degraded about 90 and 99% of MR dye respectively, under UV light in a short irradiation time of 10 min. The recovered and re-recovered ZnO NPs and ZnO/KC NCs also considerably photodegraded MR dye in an aqueous medium. The same NPs also exhibit promising bioactivities against two pathogenic bacteria, i.e., Citrobacter and Providencia. The antioxidant activity of ZnO/KC NCs reached to reasonable 70% compared to the 88% activity of the standard ascorbic acid.

Chitosan-g-polyacrylonitrile ZnO nano-composite, synthesis and characterization as new and good adsorbent for Iron from groundwater

The highly poisonous, non-biodegradable heavy metals present serious concern in wastewater environmental sustainability and human health. Using adsorption is an effective technology for the treatment of this kind of water. Therefore, developing efficient and cost-effective adsorbents considers a significant and an emerging topic in the field the water purification. Chitosan grafted polyacrylonitrile (Cs-g-PAN) was facially fabricated via graft polymerization using ammonium persulfate (APS) as the initiator. The simple ultrasonic technique was used for doping ZnO nanoparticles into the Cs-g-PAN matrix to prepare chitosan-grafted polyacrylonitrile/ZnO (Cs-g-PAN/ZnO). For comparative study, pure ZnO and nanocomposite of PAN doped with ZnO (PAN/ZnO) were also prepared. XRD, FTIR, SEM, TEM, BET, EDS, and TGA measurements were conducted to confirm the morphological and structural properties of the prepared materials. Cs-g-PAN/ZnO possesses a specific surface area of 20.23 m²/g with a pore size of 31.58 nm and pore volume of 0.16 cm³ g^-1. The adsorption behavior toward Fe(II) as a pollutant for groundwater was studied for the synthesized materials. The effect of pH (4-8), contact time (5-60 min), adsorbent dose (0.01-0.3 g), and different temperature degrees (278, 288, 298, 308, and 318 K) on the removal of iron (II) has been conducted. The removal efficiency was achieved 100 % under the optimum condition, at pH = 7, contact time 30 min, adsorbate concentration 0.93 mg/L, and adsorbent dosage 0.05 g/L at room temperature. Langmuir and Freundlich's isothermal and kinetic studies have been analyzed to determine the adsorption mechanism of Fe(II) ions on the synthesized nanomaterials. The adsorption process of Fe(II) over the surface of prepared catalysts proceeded via the Langmuir model and pseudo-second-order reaction kinetics with R² > 0.99. Suggesting the formation of Fe(II) monolayer over the adsorbent surface and the rate-limiting step is probably controlled by chemisorption through sharing the electrons between Fe⁺² and the prepared catalyst.

Algal Extracts for Green Synthesis of Zinc Oxide Nanoparticles: Promising Approach for Algae Bioremediation

Zinc oxide nanoparticles (ZnO-NPs) possess unique properties, making them a popular material across various industries. However, traditional methods of synthesizing ZnO-NPs are associated with environmental and health risks due to the use of harmful chemicals. As a result, the development of eco-friendly manufacturing practices, such as green-synthesis methodologies, has gained momentum. Green synthesis of ZnO-NPs using biological substrates offers several advantages over conventional approaches, such as cost-effectiveness, simplicity of scaling up, and reduced environmental impact. While both dried dead and living biomasses can be used for synthesis, the extracellular mode is more commonly employed. Although several biological substrates have been successfully utilized for the green production of ZnO-NPs, large-scale production remains challenging due to the complexity of biological extracts. In addition, ZnO-NPs have significant potential for photocatalysis and adsorption in the remediation of industrial effluents. The ease of use, efficacy, quick oxidation, cost-effectiveness, and reduced synthesis of harmful byproducts make them a promising tool in this field. This review aims to describe the different biological substrate sources and technologies used in the green synthesis of ZnO-NPs and their impact on properties. Traditional synthesis methods using harmful chemicals limit their clinical field of use. However, the emergence of algae as a promising substrate for creating safe, biocompatible, non-toxic, economic, and ecological synthesis techniques is gaining momentum. Future research is required to explore the potential of other algae species for biogenic synthesis. Moreover, this review focuses on how green synthesis of ZnO-NPs using biological substrates offers a viable alternative to traditional methods. Moreover, the use of these nanoparticles for industrial-effluent remediation is a promising field for future research.

Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

The presence of heavy metals in wastewater, such as Ni, Pb, Cd, V, Cr, and Cu, is a serious environmental problem. This kind of inorganic pollutant is not biodegradable for several years, and its harmful effect is cumulative. Recently, semiconductor nanomaterials based on metal oxides have gained interest due to their efficiency in the removal of heavy metals from contaminated water, by inducing photocatalytic ion reduction when they absorb light of the appropriate wavelength. The most commonly applied semiconductor oxides for these purposes are titanium oxide (TiO2), zinc oxide (ZnO), and binary nanomaterials composed of both types of oxides. The main purpose of this work is to critically analyse the existent literature concerning this topic focusing specially in the most important factors affecting the adsorption or photocatalytic capacities of this type of nanomaterials. In particular, photocatalytic activity is altered by various factors, such as proportion of polymorphs, synthesis method, surface area, concentration of defects and particle size, among others. After a survey of the actual literature, it was found that, although these metal oxides have low absorption capacity for visible light, it is possible to obtain an acceptable heavy metal reduction performance by sensitization with dyes, doping with metallic or nonmetallic atoms, introduction of defects, or the coupling of two or more semiconductors.

Effect of soil texture and zinc oxide nanoparticles on growth and accumulation of cadmium by wheat: a life cycle study

Cadmium (Cd) is getting worldwide attention due to its continuous accumulation in agricultural soils which is due to anthropogenic activities and finally Cd enters in food chain mainly through edible plants. Cadmium free food production on contaminated soils is great challenge which requires some innovative measures for crop production on such soils. The current study evaluated the efficiency of zinc oxide nanoparticles (ZnONPs) (0, 150 and 300 mg/kg) on the growth of wheat in texturally different soils including clay loam (CL), sandy clay loam (SCL), and sandy loam (SL) which were contaminated with were contaminated with 25 mg/kg of Cd before crop growth. Results depicted that doses of ZnONPs and soil textures significantly affected the biological yields, Zn and Cd uptake in wheat plants. The application of 300 mg/kg ZnONPs caused maximum increase in dry weights of shoot (66.6%), roots (58.5%), husk (137.8%) and grains (137.8%) in CL soil. The AB-DTPA extractable Zn was increased while Cd was decreased with doses of NPs depending upon soil textures. The maximum decrease in AB-DTPA extractable Cd was recorded in 300 mg/kg of ZnONPs treatment which was 58.7% in CL, 33.2% in SCL and 12.1% in SL soil as compared to respective controls. Minimum Cd concentrations in roots, shoots, husk and grain were found in 300 mg/kg ZnONPs amended CL soil which was 58%, 76.7%, 58%, and 82.6%, respectively. The minimum bioaccumulation factor (0.14), translocation index (2.46) and health risk index (0.05) was found in CL soil with the highest dose of NPs. The results concluded that use of ZnONPs significantly decreased Cd concentration while increased Zn concentrations in plants depending upon doses of NPs and soil textures.

An Evaluation of the Biocatalyst for the Synthesis and Application of Zinc Oxide Nanoparticles for Water Remediation—A Review

Global water scarcity is threatening the lives of humans, and it is exacerbated by the contamination of water, which occurs because of increased industrialization and soaring population density. The available conventional physical and chemical water treatment techniques are hazardous to living organisms and are not environmentally friendly, as toxic chemical elements are used during these processes. Nanotechnology has presented a possible way in which to solve these issues by using unique materials with desirable properties. Zinc oxide nanoparticles (ZnO NPs) can be used effectively and efficiently for water treatment, along with other nanotechnologies. Owing to rising concerns regarding the environmental unfriendliness and toxicity of nanomaterials, ZnO NPs have recently been synthesized through biologically available and replenishable sources using a green chemistry or green synthesis protocol. The green-synthesized ZnO NPs are less toxic, more eco-friendly, and more biocompatible than other chemically and physically synthesized materials. In this article, the biogenic synthesis and characterization techniques of ZnO NPs using plants, bacteria, fungi, algae, and biological derivatives are reviewed and discussed. The applications of the biologically prepared ZnO NPs, when used for water treatment, are outlined. Additionally, their mechanisms of action, such as the photocatalytic degradation of dyes, the production of reactive oxygen species (ROS), the generation of compounds such as hydrogen peroxide and superoxide, Zn2+ release to degrade microbes, as well as their adsorbent properties with regard to heavy metals and other contaminants in water bodies, are explained. Furthermore, challenges facing the green synthesis of these nanomaterials are outlined. Future research should focus on how nanomaterials should reach the commercialization stage, and suggestions as to how this ought to be achieved are presented.

Chemical Modification of Neem (Azadirachta indica) Biomass as Bioadsorbent for Removal of Pb2+ Ion from Aqueous Waste Water

In this study, neem biomass (a mixture of neem leaf and bark), obtained from the matured neem tree, which is an eco-friendly and low-cost material was selected as a bioadsorbent to remove lead metal ion (Pb2+) from aqueous solutions. Neem biomass-based bioadsorbent having a carboxylic group was prepared by activation using chemical modification by NaOH and citric acid with a very simple method. The optimal activation conditions were determined as 37 min, 120°C, in 0.73 M citric acid, with a sample/acid ratio of 1/100 (mass/volume). To determine the basic properties such as chemical structure, porosity, and surface properties of the neem biomass (NB) and chemically modified neem biomass (CMNB), they were characterized by BET, FTIR, SEM, XRD, and pHpzc methods. It was observed that activation has improved the adsorption capacity of the NB and also caused a more amorphous structure. The effects of adsorption parameters such as pH (2–7), contact time (10–110 min), initial Pb2+ ion concentration (100–300 g/L), and bioadsorbent dosage (01–1.1 g/L) on percentage removal of Pb2+ ion were studied. Maximum removal of Pb2+ ion (97.29%) was recorded at 0.9 g/L bioadsorbent dosage, 50 min contact time, pH of 6, and initial metal ion concentration of 100 mg/L. Kinetics and isotherm studies showed that the adsorption mechanism of Pb2+ ion using CMNB follows pseudosecond-order while isotherm studies fit with both models but, relatively, Freundlich model better fit having a little higher $R^2=0.9804$ . The outcome specifies that the modified bioadsorbent can be utilized as a good and low-cost alternative for the treatment of effluent containing lead (II) ions in water.

Synthesis of cesium lead halide perovskite/zinc oxide (CsPbX3/ZnO, X= Br, I) as heterostructure photocatalyst with improved activity for heavy metal degradation

Inorganic perovskites have been recognized as highly potent materials for the display and medical industries due to their outstanding features. However, there haven’t been many reports on their implications as a photocatalyst for the removal of heavy metals. Photocatalysis has been regarded as a significant approach for the removal of pollutants because of its great sustainability, improved efficiency, and reduced energy consumption. Here, we applied inorganic cesium lead halides (Br and I) with zinc oxide heterostructure as a photocatalyst for the first time. The heterostructure has been synthesized by the traditional hot injection strategy and its photocatalytic activity was systematically investigated. Interestingly, the CsPbX₃/ZnO heterostructure as a photocatalyst has a homogeneous geometry and possesses an excellent degradation efficiency of over 50% under xenon UV-Visible light. The CsPbX₃/ZnO catalyst carries superior oxidation/reduction properties and ionic conductivity due to the synergistic photogenerated charge carrier and interaction between CsPbX₃ and ZnO. The recycling experiment showed the good stability of the catalysts. These findings suggest that inorganic lead halide heterostructure has the potential to be used for heavy metal degradation and water pollution removal catalysts.

Recent Advances in Photocatalytic Oxidation of Methane to Methanol

Methane is one of the promising alternatives to non-renewable petroleum resources since it can be transformed into added-value hydrocarbon feedstocks through suitable reactions. The conversion of methane to methanol with a higher chemical value has recently attracted much attention. The selective oxidation of methane to methanol is often considered a “holy grail” reaction in catalysis. However, methanol production through the thermal catalytic process is thermodynamically and economically unfavorable due to its high energy consumption, low catalyst stability, and complex reactor maintenance. Photocatalytic technology offers great potential to carry out unfavorable reactions under mild conditions. Many in-depth studies have been carried out on the photocatalytic conversion of methane to methanol. This review will comprehensively provide recent progress in the photocatalytic oxidation of methane to methanol based on materials and engineering perspectives. Several aspects are considered, such as the type of semiconductor-based photocatalyst (tungsten, titania, zinc, etc.), structure modification of photocatalyst (doping, heterojunction, surface modification, crystal facet re-arrangement, and electron scavenger), factors affecting the reaction process (physiochemical characteristic of photocatalyst, operational condition, and reactor configuration), and briefly proposed reaction mechanism. Analysis of existing challenges and recommendations for the future development of photocatalytic technology for methane to methanol conversion is also highlighted.

Photocatalytic activity of CuO nanoparticles for organic and inorganic pollutants removal in wastewater remediation

Heterogeneous photocatalysis is a promising technology for eradicating organic, inorganic, and microbial pollutants in water and wastewater remediation. It is a more preferable method to other conventional wastewater treatment approaches on account of its low cost, environmental benignity, ability to proceed at ambient temperature and pressure conditions, and capability to completely degrade pollutants under appropriate conditions into environmentally safe products. In heterogeneous photocatalysis, pollutant removal is mainly induced by in-situ generated reactive radicals and their subsequent attack when energetic radiation impinges on the semiconductor catalyst. As such, for the effective and economical removal of wastewater pollutants, the employed catalyst should have high photonic efficiency, less toxic, abundant, chemically and photochemically stableand visible light active. Copper (II) oxide (CuO) is one among such promising compounds and its photocatalytic performance has been hampered primarily by rapid recombination and slow mobility of photogenerated charge carriers. So, this review provides an overview of the strategies adopted to mitigate the aforementioned drawbacks and also other operational parameters to boost its catalytic activity towards the elimination of toxic organic and inorganic metal ion contaminants in an aqueous media.

Phyco-Synthesized Zinc Oxide Nanoparticles Using Marine Macroalgae, Ulva fasciata Delile, Characterization, Antibacterial Activity, Photocatalysis, and Tanning Wastewater Treatment

The aqueous extract of marine green macroalgae, Ulva fasciata Delile, was harnessed for the synthesis of zinc oxide nanoparticles (ZnO-NPs). The conversion to ZnO-NPs was characterized by color change, UV–vis spectroscopy, FT-IR, TEM, SEM-EDX, and XRD. Data showed the formation of spherical and crystalline ZnO-NPs with a size range of 3–33 nm. SEM-EDX revealed the presence of Zn and O in weight percentages of 45.3 and 31.62%, respectively. The phyco-synthesized ZnO-NPs exhibited an effective antibacterial activity against the pathogenic Gram-positive and Gram-negative bacteria. The bacterial clear zones ranged from 21.7 ± 0.6 to 14.7 ± 0.6 mm with MIC values of 50–6.25 µg mL−1. The catalytic activity of our product was investigated in dark and visible light conditions, using the methylene blue (MB) dye. The maximum dye removal (84.9 ± 1.2%) was achieved after 140 min in the presence of 1.0 mg mL−1 of our nanocatalyst under the visible light at a pH of 7 and a temperature of 35 °C. This percentage was decreased to 53.4 ± 0.7% under the dark conditions. This nanocatalyst showed a high reusability with a decreasing percentage of ~5.2% after six successive cycles. Under the optimum conditions, ZnO-NPs showed a high efficacy in decolorizing the tanning wastewater with a percentage of 96.1 ± 1.7%. Moreover, the parameters of the COD, BOD, TSS, and conductivity were decreased with percentages of 88.8, 88.5, 96.9, and 91.5%, respectively. Moreover, nano-ZnO had a high efficacy in decreasing the content of the tanning wastewater Cr (VI) from 864.3 ± 5.8 to 57.3 ± 4.1 mg L−1 with a removal percentage of 93.4%.

Review of oilfield produced water treatment technologies

Produced water is the wastewater formed when water is brought from subsurface reservoirs during oil or gas extraction. Currently, produced water is mainly treated using conventional trains that contain adsorbates, membrane filters, phase separators and cyclones. This paper reviewed the detailed characteristics of oilfield-produced water and the assessment of multiple technologies at primary, secondary, and tertiary treatments stages. The effectiveness of the treatment technology from the production of waste, energy requirements, usage of chemicals and the treatment effect of contaminants has been discussed. Then a qualitative assessment was presented in terms of energy requirements, robustness, flexibility, waste generation, modularity, and mobility, which has become critical to the development and application prospects of any technology.

Nanoarchitectonics of Copper Tungsten-Mesoporous Silica with a New Template for Photo Oxidative-Desulfurization of Dibenzothiophene

A novel CuWO4/SiO2 heterojunction catalyst was successfully synthesized using a new sulfonamide derivative. The physical characteristics of the prepared samples were investigated by TGA, XRD, FTIR, SEM, UV, PL, and XPS. The prepared catalysts were applied as a nano photocatalyst for photooxidative desulfurization of dibenzothiophene under visible light using hydrogen peroxide as an oxidant. The photocatalytic oxidative desulfurization performances of the prepared samples were investigated. Various factors as the reaction time, dibenzothiophene concentration, catalyst dose, and the oxidizing agent dose were also studied. The prepared photocatalyst has high desulfurization activity in the removal of DBT under mild conditions. Results showed that the CuWO4/SiO2 exhibited considerably higher activity than neat support SiO2. Such improved photocatalytic activity is mainly attributed to the efficient separation of photogenerated electron–hole pairs on CuWO4/SiO2 heterojunction. Moreover, the synergistic effects of this photocatalytic oxidation and the green oxidant hydrogen peroxide played an essential role in desulfurization. The reaction is pseudo-first-order and can reach 98.6% removal of dibenzothiophene after 70 min and 97.2% after four cycles.

Graphical Abstract

A critical review on clay-based nanocomposite particles for application of wastewater treatment

Nanotechnology plays an important function in recent environmental aspects for the elimination of contaminants in the ecosystem. In recent times, nano-clay has initiated more concentration because of its distinctive physicochemical properties and characteristics. Recently, many types of research in clay-based nanocomposite were accomplished in the elimination of pollutants from water sources. Nanocomposite materials have advanced properties useful for contaminat removal such as higher surface area, thermal stability, selectivity to remove different contaminants, improved process ability, and fast decontamination. Thus, the development of clay-based composite materials is one of the upcoming directions to use effectively in water and wastewater treatment as adsorbent nanomaterials. This paper assesses the latest achievement in clay-based nanocomposite preparation, material property analysis and function for various pollutant removals. In particular, great consideration was paid to the recent progress in clay/metallic, clay-polymer, and clay-carbon composites presenting their application in the removal of different kinds of pollutants. Moreover, the mechanism of adsorption, the challenges and future perspective were also discussed to reach the optimum performance of the nanomaterials adsorbent. It is confirmed that clay-based nanocomposite materials are more cost-effective technology than conventional treatment methods.

Synthesis of Porous N-doped TiO2 by Using Peroxo Sol-Gel Method for Photocatalytic Reduction of Cd(II)

Porous N-doped TiO2 photocatalyst was successfully synthesized by an environmentally friendly peroxo sol-gel method using polyethylene glycol (PEG) as a templating agent. Here, the effect of PEG addition to the aqueous peroxotitanium solutions on the structure, pore properties and photocatalytic activity of the obtained photocatalysts was systematically studied. The prepared photocatalysts were characterized by X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS), and Brunauer-Emmett-Teller (BET). It was found that the doping of nitrogen narrows the band gap of TiO2 leading to enhance its visible-light response. The BET analysis shows that the prepared photocatalysts have a typical mesoporous structure with pore sizes of 3–6 nm. The photocatalytic activity of the prepared photocatalysts was evaluated by photocatalytic reduction of Cd(II) in an aqueous solution under visible light irradiation. The results show that porous N-doped TiO2 with the optimal PEG addition had the highest Cd(II) reduction of 85.1% after 2.5 h irradiation in neutral aqueous solution. This significant improvement in photocatalytic activity of the prepared photocatalysts was mainly attributed to the synergistic combination of N doping and porous structure, which could actively increase the catalytic active site of this photocatalysts. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Antimicrobial nanocomposite adsorbent based on poly(meta-phenylenediamine) for remediation of lead (II) from water medium

In this study, poly(m-phenylenediamine)@ZnO (PmPDA@ZnO) nanocomposite was fabricated by in-situ chemical oxidative polymerization for the effective lead(II) removal from aqueous solutions. PmPDA@ZnO was characterized by several instrumental methods like FTIR, XRD, EDX, TGA, FESEM, TEM, zeta potential, and BET. The TEM images showed a core-shell-like structure for the PmPDA@ZnO nanocomposite. TGA results showed that the thermal stability of the PmPDA@ZnO nanocomposite was higher than the PmPDA. The maximum adsorption of lead (II) onto PmPDA@ZnO nanocomposite was obtained at pH 6, adsorbent dosage 60 mg, lead(II) ion concentration 90 mg/L, and agitation time 90 min. Langmuir and Freundlich's isotherm models were evaluated to simulate the lead(II) sorption via empirical data. Langmuir's model was in good agreement with empirical data with a maximum adsorption capacity (Qmax) of 77.51 mg/g. The kinetic data adsorption fitted best the pseudo-second-order model. The values of thermodynamic parameters of ΔS° and ΔH° were obtained 0.272 J/mol K, and 71.35 kJ/mol, respectively. The spontaneous and endothermic behavior of the adsorption process was confirmed by the negative and positive response of ΔG° and ΔH°, respectively. Moreover, the addition of coexisting cations e.g. cobalt (II), nickel (II), calcium (II), and copper (II) had no significant effect on the removal efficiency of lead(II). Adsorption-desorption studies showed that the PmPDA@ZnO nanocomposite can be remarkably regenerated and reused after three sequential runs without a significant decline in its adsorption performance. The antimicrobial activities of PmPDA@ZnO nanocomposite were evaluated against Escherichia coli and Staphylococcus aureus bacteria species. These results confirmed that the PmPDA@ZnO nanocomposite could be a good candidate for water decontamination.

Enhanced Solar Photocatalytic Activity of Thermally Stable I:ZnO/Glass Beads for Reduction of Cr(VI) in Tannery Effluent

Chromium (VI) in tannery effluent is one of the major environmental concerns for the environmentalists due to the hazardous nature of Cr(VI) ions. To reduce Cr(VI) to Cr(III) as an innocuous moiety, pure and I-doped ZnO was grafted over the etched surface of glass beads by successive ionic layer adsorption and reaction (SILAR). Powdered, pure, and I-doped ZnO scrapped from the surface of glass beads was characterized for crystallinity, morphology, and elemental composition by XRD, SEM, TEM, and EDX. The optical properties of both photocatalysts revealed that owing to optimized iodine doping of ZnO, reduction in the bandgap was observed from 3.3 to 2.9 eV. The crystalline nano-bricks of I:ZnO adhered to glass beads were investigated to have remarkable capability to harvest sunlight in comparison to intrinsic ZnO nanodiscs. The thermal stability of I:ZnO was also found to be much improved due to doping of ZnO. The photocatalytic activities of ZnO/GB and I:ZnO/GB were compared by extent of reduction of Cr(VI) under direct natural sunlight (600–650 KWh/m2). The disappearance of absorbance peaks associated with Cr(VI) after treatment with I:ZnO/GB confirmed higher photocatalytic activity of I:ZnO/GB. The reaction parameters of solar photocatalytic reduction, i.e., initial pH (5–9), initial concentration of Cr(VI) (10–50 ppm), and solar irradiation time (1–5 h) were optimized using response surface methodology. The solar photocatalytic reduction of Cr(VI) to Cr(III) present in real tannery effluent was examined to be 87 and 98%, respectively, by employing ZnO/GB and I:ZnO/GB as solar photocatalysts. The extent of reduction was also confirmed by complexation of Cr(VI) and Cr(III) present in treated and untreated tannery waste with 1, 5-diphenylcarbazide. The results of AAS and UV/vis spectroscopy for the decrease in concentration of Cr also supported the evidence of higher efficiency of I:ZnO/GB for reduction of Cr(VI) in tannery effluent. Reusability of the fabricated photocatalyst was assessed for eight cycles, and magnificent extent of reduction of Cr(VI) indicated its high efficiency. Conclusively, I:ZnO/GB is a potential and cost-effective candidate for Cr(VI) reduction in tannery effluent under natural sunlight.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Enhancement in Photovoltaic Performance of Solar Cells by Electrostatic Adsorption of Dyes on ZnO Nanorods

ZnO nanorods were formed by chemical bath deposition on fluorine-doped tin oxide (FTO) glass and the photovoltaic performance of ZnO-based dye-sensitized solar cells (DSCs) was investigated. A DSC with 8 h-grown ZnO nanorods showed a higher power conversion efficiency (PCE) than devices with 4, 6, and 10 h-grown ones. Further improvement in PCE was achieved in a cell with a silver-ion-deposited ZnO/FTO electrode. By deposition of Ag+ on the surface of the 8 h-grown ZnO nanorods, the dye-loading amount increased by approximately 210%, compared to that of pristine ZnO nanorods, resulting in a 1.8-times higher PCE. A DSC with the pristine ZnO/FTO electrode showed a PCE of 0.629%, while in a device with the silver-ion-deposited ZnO/FTO, the PCE increased to 1.138%. In addition, interfacial resistance at the ZnO/dye/electrolyte was reduced to approximately 170 Ω from 460 Ω for the control cell with the pristine ZnO/FTO. We attributed the higher dye-loading amount in the silver-ion-deposited ZnO/FTO to the electrostatic attraction between the positively charged ZnO and carboxylate anions (-COO-) of the N719 dyes.

Cobalt Recovery from Li-Ion Battery Recycling: A Critical Review

The increasing demand for Li-ion batteries for electric vehicles sheds light upon the Co supply chain. The metal is crucial to the cathode of these batteries, and the leading global producer is the D.R. Congo (70%). For this reason, it is considered critical/strategic due to the risk of interruption of supply in the short and medium term. Due to the increasing consumption for the transportation market, the batteries might be considered a secondary source of Co. The outstanding amount of spent batteries makes them to a core of urban mining warranting special attention. Greener technologies for Co recovery are necessary to achieve sustainable development. As a result of these sourcing challenges, this study is devoted to reviewing the techniques for Co recovery, such as acid leaching (inorganic and organic), separation (solvent extraction, ion exchange resins, and precipitation), and emerging technologies—ionic liquids, deep eutectic solvent, supercritical fluids, nanotechnology, and biohydrometallurgy. A dearth of research in emerging technologies for Co recovery from Li-ion batteries is discussed throughout the manuscript within a broader overview. The study is strictly connected to the Sustainability Development Goals (SDG) number 7, 8, 9, and 12.

Effect of ZnO nanoparticles on Zn, Cu, and Pb dissolution in a green bioretention system for urban stormwater remediation

Stormwater runoff from urban and suburban areas can carry hazardous pollutants directly into aquatic ecosystems. These pollutants, such as metals, nutrients, aromatic hydrocarbons, pesticides, and pharmaceuticals, are very toxic to aquatic organisms. Recently, significant amounts of zinc oxide engineered nanoparticles (ZnO-NPs) have been detected in urban stormwater and its bioretention systems. This raises concerns about a potential increase of stormwater toxicity and reduced performance of the treatment infrastructures. To tackle these issues, we developed a simple, low-cost bioretention system to remediate stormwater and retain ZnO-NPs. This system retained up to 73% Zn, 66% Cu, and >99% Pb. However, the removal efficiency for Pb was lower after adding ZnO-NPs to the system, possibly due to the remobilization of Pb phosphates. The effect of ZnO-NPs on stormwater toxicity and metal accumulation in wetland plants was also evaluated.

Synergistic effect of pistachio shell powder and nano-zerovalent copper for chromium remediation from aqueous solution

Pistachio shell powder supported nano-zerovalent copper (ZVC@PS) material prepared by borohydride reduction was characterized using SEM, FTIR, XRD, TGA/DTA, BET, and XPS. SEM, XRD, and XPS revealed the nano-zerovalent copper to consist of a core-shell structure with CuO shell and Cu(0) core with a particle size of 40-100 nm and spherical morphology aggregated on PS biomass. ZVC@PS was found to contain 39% (w/w %) Cu onto the pistachio shell biomass. Batch sorption of Cr(VI) from the aqueous using ZVC@PS was studied and was optimized for dose (0.1-0.5 g/L), initial Cr(VI) concentration(1-20 mg/L), and pH (2-12). Optimized conditions were 0.1 g/L doses of sorbent and pH=3 for Cr(VI) adsorption. Langmuir and Freundlich adsorption isotherm models fitted well to the adsorption behavior of ZVC@PS for Cr(VI) with a pseudo-second-order kinetic behavior. ZVC@PS (0.1g/L) exhibits q_max for Cr(VI) removal up to 110.9 mg/g. XPS and other spectroscopic evidence suggest the adsorption of Cr(VI) by pistachio shell powder, coupled with reductive conversion of Cr(VI) to Cr(III) by ZVC particles to produce a synergistic effect for the efficient remediation of Cr(VI) from aqueous medium.

Highly Efficient Removal of Cu(II) Ions from Acidic Aqueous Solution Using ZnO Nanoparticles as Nano-Adsorbents

Water pollution by heavy metals has significant effects on aquatic ecosystems. Copper is one of the heavy metals that can cause environmental pollution and toxic effects in natural waters. This encourages the development of better technological alternatives for the removal of this pollutant. This work explores the application of ZnO nanoparticles (ZnO-NPs) for the removal of Cu(II) ions from acidic waters. ZnO NPs were characterized and adsorption experiments were performed under different acidic pHs to evaluate the removal of Cu(II) ions with ZnO NPs. The ZnO NPs were chemically stable under acidic conditions. The adsorption capacity of ZnO NPs for Cu(II) was up to 47.5 and 40.2 mg·g−1 at pH 4.8 and pH 4.0, respectively. The results revealed that qmax (47.5 mg·g−1) and maximum removal efficiency of Cu(II) (98.4%) are achieved at pH = 4.8. In addition, the surface roughness of ZnO NPs decreases approximately 70% after adsorption of Cu(II) at pH 4. The Cu(II) adsorption behavior was more adequately explained by Temkin isotherm model. Additionally, adsorption kinetics were efficiently explained with the pseudo-second-order kinetic model. These results show that ZnO NPs can be an efficient alternative for the removal of Cu(II) from acidic waters and the adsorption process was more efficient under pH = 4.8. This study provides new information about the potential application of ZnO NPs as an effective adsorbent for the remediation and treatment of acidic waters contaminated with Cu(II).

Nanotechnological approaches as a promising way for heavy metal mitigation in an aqueous system

The ever-rising environmental problems because of heavy metals emerging from anthropogenic activities pose an impending threat to all biota globally. Considering their persistence and possibility in biomagnification, they are prominent among pollutants. There has been an apparent shift of research interest in advancing cost-effective and competent technologies to mitigate environmental contaminants, specifically heavy metals. In the recent two decades, tailored nanomaterials (NMs), nanoparticles, and NM-based adsorbents have been emerging for removing heavy metal pollution on a sustainable scale, especially the green synthesis of these nanoproducts effective and nonhazardous means. Hence, this review explores the various avenues in nanotechnology, an attempt to gauge nanotechnological approaches to mitigate heavy metals in the aqueous system, especially emphasizing the recent trends and advancements. Inputs on remediating heavy metal in sustainable and environmentally benign aspects recommended future directions to compensate for the voids in this domain have been addressed.

A comprehensive review on magnetic carbon nanotubes and carbon nanotube-based buckypaper for removal of heavy metals and dyes

Industrial effluents contain several organic and inorganic contaminants. Among others, dyes and heavy metals introduce a serious threat to drinking waterbodies. These pollutants can be noxious or carcinogenic in nature, and harmful to humans and different aquatic species. Therefore, it is of high importance to remove heavy metals and dyes to reduce their environmental toxicity. This has led to an extensive research for the development of novel materials and techniques for the removal of heavy metals and dyes. One route to the removal of these pollutants is the utilization of magnetic carbon nanotubes (CNT) as adsorbents. Magnetic carbon nanotubes hold remarkable properties such as surface-volume ratio, higher surface area, convenient separation methods, etc. The suitable characteristics of magnetic carbon nanotubes have led them to an extensive search for their utilization in water purification. Along with magnetic carbon nanotubes, the buckypaper (BP) membranes are also favorable due to their unique strength, high porosity, and adsorption capability. However, BP membranes are mostly used for salt removal from the aqueous phase and limited literature shows their applications for removal of heavy metals and dyes. This study focuses on the existence of heavy metal ions and dyes in the aquatic environment, and methods for their removal. Various fabrication approaches for the development of magnetic-CNTs and CNT-based BP membranes are also discussed. With the remarkable separation performance and ultra-high-water flux, magnetic-CNTs, and CNT-based BP membranes have a great potential to be the leading technologies for water treatment in future.

Saussurea lappa plant rhizome extract-based zinc oxide nanoparticles: synthesis, characterization and its antibacterial, antifungal activities and cytotoxic studies against Chinese Hamster Ovary (CHO) cell lines

The plant extracts are known for their anti-inflammatory, antifungal, antiviral and antibacterial properties. The use of plant extracts in the preparation of bio-materials increases their biological application. In this concern, herein reporting an eco-friendly procedure which is also a simple and cost effective, for the synthesis of Zinc Oxide nanoparticles (ZnONPs) using Saussurea lappa plant root (rhizome) extract as a fuel. The prepared nanoparticles were confirmed using various characterization techniques. The Dynamic light scattering data showed 123.5 nm particle size with -99.9 mv zeta potential which indicates excellent stability of the particles. The peak at 541 cm-1 in the IR spectrum is assigned to the stretching frequency of the zinc-binding to oxygen. The X-ray diffraction peaks confirm the close association with JCPDS Data Card No: 36-1451. The FESEM data revealed a hexagonal wurtzite structure with a hexagonal shape of synthesized ZnO nanoparticles. The antibacterial studies indicate the gram-negative strains showed better inhibition activity than gram-positive strains. Among Fungal strains, Aspergillus niger and flavus, Fusarium oxysporum, and Rhizopus oryzae showed good inhibition activity at higher concentrations. The cytotoxic data indicates the 5 μg/mL of the ZnO particles showed cytotoxicity on the CHO cell line and with IC50 value 3.164 ± 0.8956 μg/mL.

Enhanced simultaneous adsorption of As(iii), Cd(ii), Pb(ii) and Cr(vi) ions from aqueous solution using cassava root husk-derived biochar loaded with ZnO nanoparticles

This study presents the modification of cassava root husk-derived biochar (CRHB) with ZnO nanoparticles (ZnO-NPs) for the simultaneous adsorption of As(iii), Cd(ii), Pb(ii) and Cr(vi). By conducting batch-mode experiments, it was concluded that 3% w/w was the best impregnation ratio for the modification of CRHB using ZnO-NPs, and was denoted as CRHB-ZnO3 in this study. The optimal conditions for heavy metal adsorption were obtained at a pH of 6–7, contact time of 60 min, and initial metal concentration of 80 mg L⁻¹. The heavy metal adsorption capacities onto CRHB-ZnO3 showed the following tendency: Pb(ii) > Cd(ii) > As(iii) > Cr(vi). The total optimal adsorption capacity achieved in the adsorption of the 4 abovementioned metals reached 115.11 and 154.21 mg g⁻¹ for CRHB and CRHB-ZnO3, respectively. For each Pb(ii), Cd(ii), As(iii), and Cr(vi) metal, the maximum adsorption capacities of CRHB-ZnO3 were 44.27, 42.05, 39.52, and 28.37 mg g⁻¹, respectively, and those of CRHB were 34.47, 32.33, 26.42 and 21.89 mg g⁻¹, respectively. In terms of kinetics, both the pseudo-first-order and the pseudo-second-order fit well with metal adsorption onto biochars with a high correlation coefficient of R², while the best isothermal description followed the Langmuir model. As a result, the adsorption process of heavy metals onto biochars was chemisorption on homogeneous monolayers, which was mainly controlled by cation exchange and surface precipitation mechanisms due to enriched oxygen-containing surface groups with ZnO-NP modification of biochar. The FTIR and EDS analysis data confirmed the important role of oxygen-containing surface groups, which significantly contributed to removal of heavy metals with extremely high adsorption capacities, comparable with other studies. In conclusion, due to very high adsorption capacities for metal cations, the cassava root husk-derived biochar modified with ZnO-NPs can be applied as the alternative, inexpensive, non-toxic and highly effective adsorbent in the removal of various toxic cations.

This study presents the modification of cassava root husk-derived biochar (CRHB) with ZnO nanoparticles (ZnO-NPs) for the simultaneous adsorption of As(iii), Cd(ii), Pb(ii) and Cr(vi).

Removal of Mn(II) from Acidic Wastewaters Using Graphene Oxide-ZnO Nanocomposites

Pollution due to acidic and metal-enriched waters affects the quality of surface and groundwater resources, limiting their uses for various purposes. Particularly, manganese pollution has attracted attention due to its impact on human health and its negative effects on ecosystems. Applications of nanomaterials such as graphene oxide (GO) have emerged as potential candidates for removing complex contaminants. In this study, we present the preliminary results of the removal of Mn(II) ions from acidic waters by using GO functionalized with zinc oxide nanoparticles (ZnO). Batch adsorption experiments were performed under two different acidity conditions (pH1 = 5.0 and pH2 = 4.0), in order to evaluate the impact of acid pH on the adsorption capacity. We observed that the adsorption of Mn(II) was independent of the pH_PZC value of the nanoadsorbents. The qmax with GO/ZnO nanocomposites was 5.6 mg/g (34.1% removal) at pH = 5.0, while with more acidic conditions (pH = 4.0) it reached 12.6 mg/g (61.2% removal). In turn, the results show that GO/ZnO nanocomposites were more efficient to remove Mn(II) compared with non-functionalized GO under the pH2 condition (pH2 = 4.0). Both Langmuir and Freundlich models fit well with the adsorption process, suggesting that both mechanisms are involved in the removal of Mn(II) with GO and GO/ZnO nanocomposites. Furthermore, adsorption isotherms were efficiently modeled with the pseudo-second-order kinetic model. These results indicate that the removal of Mn(II) by GO/ZnO is strongly influenced by the pH of the solution, and the decoration with ZnO significantly increases the adsorption capacity of Mn(II) ions. These findings can provide valuable information for optimizing the design and configuration of wastewater treatment technologies based on GO nanomaterials for the removal of Mn(II) from natural and industrial waters.

Chitosan-Based Nanocomposite Polymeric Membranes for Water Purification-A Review

During the past few years, researchers have focused their attention on developing innovative nanocomposite polymeric membranes with applications in water purification. Natural and synthetic polymers were considered, and it was proven that chitosan-based materials presented important features. This review presents an overview regarding diverse materials used in developing innovative chitosan-based nanocomposite polymeric membranes for water purification. The first part of the review presents a detailed introduction about chitosan, highlighting the fact that is a biocompatible, biodegradable, low-cost, nontoxic biopolymer, having unique structure and interesting properties, and also antibacterial and antioxidant activities, reasons for using it in water treatment applications. To use chitosan-based materials for developing nanocomposite polymeric membranes for wastewater purification applications must enhance their performance by using different materials. In the second part of the review, the performance's features will be presented as a consequence of adding different nanoparticles, also showing the effect that those nanoparticles could bring on other polymeric membranes. Among these features, pollutant's retention and enhancing thermo-mechanical properties will be mentioned. The focus of the third section of the review will illustrate chitosan-based nanocomposite as polymeric membranes for water purification. Over the last few years, researchers have demonstrated that adsorbent nanocomposite polymeric membranes are powerful, important, and potential instruments in separation or removal of pollutants, such as heavy metals, dyes, and other toxic compounds presented in water systems. Lastly, we conclude this review with a summary of the most important applications of chitosan-based nanocomposite polymeric membranes and their perspectives in water purification.

Development of a polymeric nanocomposite as a high performance adsorbent for Pb(II) removal from water medium: Equilibrium, kinetic and antimicrobial activity

In the present study, starch based ZnO nancomposite (CSt-ZnO) was synthesized for the efficient removal of Pb(II) ions from aqueous medium. The structure and morphology of CSt-ZnO nancomposite was characterized using SEM, FTIR, TGA, BET, XPS and zeta potential measurements. The effect of contact time, pH, temperature and initial concentration of Pb(II) on the adsorption was studied. The optimum parameters for maximum Pb(II) removal were time-120 min; pH-6; temperature-318 K and C_o-20 ppm. The maximum Langmuir adsorption capacity of CSt-ZnO nancomposite was 256.4 mg/g at 298 K. With increasing the temperature from 298 K to 318 K, the maximum adsorption quantity (q_m) was improved from 256.4 to 476 mg/g which showed the endothermic nature of Pb(II) adsorption on CSt-ZnO nanocomposite. The sorption isotherm and kinetics model fitting studies, confirmed that data fit well to Freundlich isotherm and pseudo-first-order kinetics models, respectively. Thermodynamic studies inferred a spontaneous and endothermic nature of adsorption. Moreover, the adsorption capacity was 68% even after four adsorption-desorption cycles which revealed the reusable performance of CSt-ZnO was well. The antimicrobial activity of CSt-ZnO nanocomposite was also examined against S. aureus and E. coli.

Abatement of organic and inorganic pollutants from drinking water by using commercial and laboratory-synthesized zinc oxide nanoparticles

ZnO nanoparticles have been synthesized and applied for the removal of different environmental pollutants in the present study. Combustion method is used for the preparation of ZnO NPs. X-Ray diffraction pattern reveals the crystallinity of the nanoparticles, where SEM and TEM images displayed that ZnO NPs were of size less than 100 nm and nearly spherical in shape. UV–Vis and IR spectra revealed the formation of ZnO NPs. Adsorption and advanced oxidation processes were employed for the removal/degradation of trace elements/pesticide. UV reactor containing 1 UV rod of 11 W (Philips) was used for the photocatalytic degradation of pesticide. ICP–OES and GC–MS techniques were used for the further quantitative analysis of trace elements and OP pesticide—monocrotophos, respectively. The analysis shows the 88% degradation of monocrotophos when subjected to UV light in the reaction chamber for 120 min at a pH 4 when 2 g of nanocatalyst is applied. However, the removal of trace element Arsenic shows linear adsorption as compared to Cd and Se. The removal efficiency of ZnO nanoparticles for Cd and Se was 36% and 64%, respectively, after 120 min. The synthesized nanoparticles are more effective than the commercially available ones.