Synthesis and characterization of chitosan/zinc oxide nanocomposite for antibacterial activity onto cotton fabrics and dye degradation applications

Carica Papaya leaf-infused metal oxide nanocomposite: a green approach towards water treatment and antibacterial applications

This study successfully synthesized ZnO-CuO nanocomposite using the hydrothermal method with Carica papaya leaf extract. The incorporation of the leaf extract significantly enhanced the nanocomposite properties, a novel approach in scientific research. Characterization techniques, including X-ray diffraction, Fourier Transmission Infrared spectroscopy, and Scanning Electron Microscopy with Energy Dispersive X-Ray Analysis, confirmed a cubic crystal structure with an average size of 22.37 nm. The Fourier Transmission Infrared spectrum revealed distinctive vibrations at 627, 661, and 751 cm-1 corresponding to ZnO-CuO nanocomposite corresponding to stretching and vibration modes. SEM images confirmed a cubic-like and irregular structure. The nanocomposite exhibited outstanding photocatalytic activity, degrading methylene blue dye by 96.73% within 120 min under visible light. Additionally, they showed significant antimicrobial activity, inhibiting Staphylococcus aureus (20 mm) and Klebsiella pneumonia (17 mm). The results highlight the efficiency of Carica papaya leaf-derived ZnO-CuO nanocomposite for environmental and health challenges.

Te4+ and Er3+ doped ZrO2 nanoparticles with enhanced photocatalytic, antibacterial activity and dielectric properties: A next generation of multifunctional material

Amid rising water contamination from industrial sources, tackling toxic dyes and pathogens is critical. Photocatalysis offers a cost-effective and eco-friendly solution to this pressing challenges. Herein, we synthesized Te4+ and Er3+ doped ZrO2 photocatalysts through hydrothermal method and investigated their efficacy in degrading Congo red (CR) and pathogens under visible light. XRD and Raman Spectroscopy confirm monoclinic and tetragonal mixed-phases without any impurities. Doping-induced defects, reduced crystalline diameter, high surface area, modified bandgap (2.95 eV), photoluminescence quenching, coupled with interfacial polarization, contribute to EZO's excellent dielectric response (1.149 × 106), for achieving remarkable photocatalytic activity, verified by photoelectrochemical measurements, LC-MS and phytotoxicity analysis. Under optimal conditions, EZO achieves 99% CR degradation within 100 min (TOC 79.9%), surpassing ZO (77%) and TZO (84%). Catalyst dosages, dye concentrations, and solution pH effect on EZO's photocatalytic performance are systematically assessed. Scavenging experiment emphasized the pivotal role of · OH in CR degradation with 96.4% efficiency after 4 cycles, affirming its remarkable stability. Moreover, EZO demonstrates ROS-mediated antibacterial activity against E. faecalis and E. coli bacteria under visible light, achieving >97% and >94% inhibition rate with an inhibition zone > 3 mm. Hence, the nanoparticle's dual action offers a practical solution for treating contaminated wastewater, ensuring safe irrigation.

Evaluation of the wound healing efficacy of new antibacterial polymeric nanofiber based on polyethylene oxide coated with copper nanoparticles and defensin peptide: An in-vitro to in-vivo assessment

Objective

Today, designing nanofibers with antibacterial properties using electrospinning technology is one of the attractive approaches for wound healing.

Methods

& analysis: This study aims to fabricate a nanocomposite from polyethylene oxide (PEO) coated with copper nanoparticles (NPs) and defensin peptide with wound healing and antimicrobial properties in different ratios of CuNPs/defensin (2/0 mg), (1.5/0.5 mg), and (1/1 mg) in the fixed contain polymer (98 mg). Then, the nanofiber properties were investigated by SEM, tensile, DSC, and BET analysis. Also, the antibacterial properties against S. aureus and E. coli, antioxidant, and in-vivo wound healing effects and histological analysis of the designed nanocomposites were evaluated in rat models.

Results

Our SEM images showed that CuNPs and defensin were properly coated on the PEO surface. According to the tensile, DSC, and antibacterial analysis results, the most appropriate feature was related to CuNPs/defensin (1.5/0.5 mg), with maximum elasticity, heat resistance, and antibacterial activity. Furthermore, the designed nanocomposites showed the best performance as a wound closure agent by increasing dermis and epidermis volume density, stimulating fibroblast cells and collagen fiber production, and improving skin vessels.

Conclusion

According to our results, PEO nanofibers loaded with CuNPs and defensin have the best potential for wound healing, and they can be used as antibacterial materials in the textile, drug, and medical industries.

Functionalization of niobium nitrogen-doped titanium dioxide (TiO2) nanoparticles with ethanolic extracts of Mentha arvensis

Titanium dioxide (TiO2) nanoparticles have gained significant attention due to their wide-ranging applications. This research explores an approach to functionalize Niobium Nitrogen Titanium Dioxide nanoparticles (Nb-N-TiO2 NPs) with Mentha arvensis ethanolic leaf extracts. This functionalization allows doped NPs to interact with the bioactive compounds in extracts, synergizing their antioxidant activity. While previous studies have investigated the antioxidant properties of TiO2 NPs synthesized using ethanolic extracts of Mentha arvensis, limited research has focused on evaluating the antioxidant potential of doped nanoparticles functionalized with plant extracts. The characterization analyses are employed by Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Ultraviolet-visible (UV-Vis) spectroscopy to evaluate these functionalized doped nanoparticles thoroughly. Subsequently, the antioxidant capabilities through the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric-reducing antioxidant power (FRAP) assays have been assessed. Within functionalized Nb-N-TiO2, the FTIR has a distinctive peak at 2350, 2010, 1312, 1212, and 1010 cm-1 with decreased transmittance associated with vibrations linked to the Nb-N bond. SEM revealed a triangular aggregation pattern, 500 nm to 2 µm of functionalized Nb-N-TiO2 NPs. Functionalized doped Nb-N-TiO2 NPs at 500 µg mL-1 exhibited particularly robust antioxidant activity, achieving an impressive 79% efficacy at DPPH assessment; meanwhile, ferric reduction efficiency of functionalized doped Nb-N-TiO2 showed maximum 72.16%. In conclusion, doped Nb-N-TiO2 NPs exhibit significantly enhanced antioxidant properties when functionalized with Mentha arvensis ethanolic extract compared to pure Nb-N-TiO2 manifested that doped Nb-N-TiO2 have broad promising endeavors for various biomedicine applications.

Research progress in the degradation of printing and dyeing wastewater using chitosan based composite photocatalytic materials

The surge in economic growth has spurred the expansion of the textile industry, resulting in a continuous rise in the discharge of printing and dyeing wastewater. In contrast, the photocatalytic method harnesses light energy to degrade pollutants, boasting low energy consumption and high efficiency. Nevertheless, traditional photocatalysts suffer from limited light responsiveness, inadequate adsorption capabilities, susceptibility to agglomeration, and hydrophilicity, thereby curtailing their practical utility. Consequently, integrating appropriate carriers with traditional photocatalysts becomes imperative. The combination of chitosan and semiconductor materials stands out by reducing band gap energy, augmenting reactive sites, mitigating carrier recombination, bolstering structural stability, and notably advancing the photocatalytic degradation of printing and dyeing wastewater. This study embarks on an exploration by initially elucidating the technical principles, merits, and demerits of prevailing printing and dyeing wastewater treatment methodologies, with a focal emphasis on the photocatalytic approach. It delineates the constraints encountered by traditional photocatalysts in practical scenarios. Subsequently, it comprehensively encapsulates the research advancements and elucidates the reaction mechanisms underlying chitosan based composite materials employed in treating printing and dyeing wastewater. Finally, this work casts a forward-looking perspective on the future research trajectory of chitosan based photocatalysts, particularly in the realm of industrial applications.

Aldehyde-free and bio-based durable coatings for cellulose fabrics with high flame retardancy, antibacteria and well wearing performance

The bio-based coatings of cellulose fabrics (cotton) had attracted increasing attention for multifunction and sustainability but suffered from poor durability and low efficiency. Here, the aldehyde-free and durable coatings for cotton fabrics (CPZ@CF) with satisfactory flame retardancy, antibacteria as well as wearing performance were prepared through the interfacial coordination effect where the well-organized zinc phytate complex were in situ grew on the pre-treated surface of cotton fabrics with chitosan (CS) and Zn2+. The CZP@CF exhibited excellent antibacterial activity for Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with 99.99 % antibacterial rates benefiting from the synergistic effect between Zn2+ and CS. Meanwhile, even the CPZ coatings loading was only 1.5 wt%, the fire safety of CZP@CF remarkably enhanced owing to the excellent synergistic catalytic charring and free radical capture. More importantly, the antibacterial rates of CZP@CF for S. aureus and E. coli still reached 99.99 % and 91.67 % after 50 washing cycles. Additionally, this treatment method did not deteriorate the fabrics properties, including mechanical and breathability as well as wearing performance, which provided the approach to fabricate the flame retardant and antibacterial textiles with well durability and wearing performance.

Green synthesis of Multifunctional Zinc oxide Nanoparticles from Cordia myxa gum; and their Catalytic Reduction of Nitrophenol, Anticancer and Antimicrobial Activity

In situ exfoliated natural polysaccharide Cordia myxa (CMX) is used to promote the utilization of zinc-oxide nanoparticles for eco-friendly catalytic hydrogenation of p-nitrophenol (p-NP) and microbial growth inhibition. Polysaccharide-mediated biosynthetic nanocomposite materials are interesting because they are cheap, green, and environmentally friendly. This study uses CMX gum as a bioreduction to produce multifunctional, environmentally friendly zinc-oxide nanocomposites (ZnO NPs). The process involves a low reaction time and temperature and utilizes CMX as a reducing and stabilizing agent. The structural, morphological, and optical properties of the CMX-ZnO nanocomposite were characterized. The biosynthetic CMX-ZnO NPs exhibited robust catalytic activity and recycling capacity for rapidly oxidizing hazardous p-NPs. The complete reduction of 4-NP to CMX-ZnO NPs in excess NaBH4 was achieved within 15 min, with recyclability and pseudo-first-order kinetics with a rate constant of 0.2571 min-1. Additionally, human colon cancer (HCT116) and 3T3L1 cell lines were remarkably sensitive to the cytotoxic effects of ZnO nanoparticles. CMX-ZnO NPs exhibited potent antibacterial properties against human pathogenic gram-positive and gram-negative bacteria (Bacillus, Salmonella, E. coli, and Pseudomonas aeruginosa) based on the zone of inhibition measured by the disc-diffusion method. The significant antibacterial activity of CMX-ZnO NPs can overcome the current limitations associated with removing water-soluble organic pollutants and microbiological contaminants for long-term environmental sustainability.

Cobalt oxide-chitosan based nanocomposites: Synthesis, characterization and their potential pharmaceutical applications

This research aimed to prepare, characterize, and investigate the biological efficacy of chitosan‑cobalt (II) oxide hybrid nanocomposites against a variety of micrograms. Analytical methods, FTIR, SEM, XRD, and EDX, were utilized to thoroughly characterize the produced CS-CoO nanocomposite. In FTIR spectra, the presence of the chitosan peaks in addition to that of CoO at 681 and 558 cm-1 confirmed that CoO molecules interact with the chitosan backbone. Moreover, in the XRD measurements, significantly less chitosan crystallinity was observed. Due to the incorporation of a larger amount of cobalt oxide within the polymer matrix. Applying the Debye-Sherrer calculation, the crystallite size was obviously reduced from 48.24 nm (5 wt %) to 19.27 nm (20 wt %) for the obtained nanocomposites. Furthermore, SEM measurements showed a transformation in the chitosan surface with the physical adsorption of CoO molecules on the surface active sites of chitosan that were visible in SEM graphs. Additionally, EDX determined the amount of Co element within the chitosan, with the sample of 20 wt % weight being found to be 19.26 wt %. The variable dose well-diffusion method was utilized to assess the efficacy of the CS-Co nanocomposite against a wide range of bacteria and fungi. CS - CoO nanocomposite is more effective than chitosan alone as an antibacterial agent against both Gram-positive and Gram-negative bacteria. Moreover, the MTT approach was employed to measure the cytotoxicity based on the cell viability of different cancer cell lines under different UV expositions. The proportion of the destroyed cells elevated due to the easy diffusion of CS - CoO nanocomposite into cancer cells as UV-free anticancer activity. UV exposition has stimulated the anticancer activity, which was attributed to an increase in ROS generation caused by the increased dose of the chitosan and its CS - CoO nanocomposites. Furthermore, the antioxidant capacities of the prepared nano-composites thin films were validated using the DPPH free radical scavenging method and showed good antioxidant activities with the DPPH radical compared with standard vitamin C. It has been noticed that by increasing the content of CoO nanoparticles from 5 to 20 wt %, the biological activity of the prepared nanocomposites was enhanced.

Self-cleaning, superhydrophobic, and antibacterial cotton fabrics with chitosan-based composite coatings

The development of cotton fabrics with special properties such as superhydrophobicity, self-cleaning, oil/water separation, anti-bacterial activity and blood repellency without compromising its intrinsic properties such as flexibility, breathability, comfort, and biodegradability is quite challenging task. In this study, a simple and environmentally friendly approach was used to fabricate superhydrophobic cotton fabric by introducing chitosan-based composite coatings over cotton fabric. The surface properties of the cotton samples were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy. The prepared cotton fabrics showed excellent superhydrophobicity with a water contact angle of 154.4° and also possess excellent antibacterial activity against Gram positive and negative bacteria with inhibition zone of 16 mm and 22 mm in disk diffusion method and shake flask method results revealed that the chitosan-PAni-ZnO-STA coated cotton effectively inhibits the bacterial growth. Furthermore, the self-cleaning, blood repellency and oil-water separation performance of cotton fabric were also performed to examine the feasibility of as-modified cotton in both environmental and clinical applications.

Novel photo and bio-active greyish-black cotton fabric through air- and nitrogen- carbonized zinc-based MOF for developing durable functional textiles

This study explores the potential of using the carbonization of Zn-based metal-organic frameworks (Zn-MOF-5) under N2 and air to modify zinc oxide (ZnO) nanoparticle for the production of various photo and bio-active greyish-black cotton fabrics. The MOF-derived ZnO under N2 demonstrated a significantly higher specific surface area (259 m2g-1) compared to ZnO (12 m2g-1) and MOF-derived ZnO under air (41.6 m2 g-1). The products were characterized using various techniques, including FTIR, XRD, XPS, FE-SEM, TEM, HRTEM, TGA, DLS, and EDS. The tensile strength and dye degradation properties of the treated fabrics were also investigated. The results indicate that the high dye degradation capability of MOF-derived ZnO under N2 is likely due to the lower ZnO band gap energy and improvement in electron-hole pair stability. Additionally, the antibacterial activities of the treated fabrics against Staphylococcus and Pseudomonas aeruginosa were investigated. The cytotoxicity of the fabrics was studied on human fibroblast cell lines using an MTT assay. The study findings demonstrate that the cotton fabric covered with carbonized Zn-MOF under N2 is human-cell compatible while showing high antibacterial activities and stability against washing, highlighting its potential for use in developing functional textiles with enhanced properties.

Ceftazidime-assisted synthesis of ultrasmall chitosan nanoparticles for biofilm penetration and eradication of Pseudomonas aeruginosa

Pseudomonas aeruginosa (P. aeruginosa) infections present a grave threat to immunocompromised individuals, particularly those with cystic fibrosis due to the development of bacterial biofilms. In this study, we engineered self-assembling chitosan-ceftazidime nanoparticles (CSCE) capable of effectively penetrating biofilms and eradicating P. aeruginosa. The CSCE nanoparticles were synthesized through ionic cross-linking, combining negatively charged ceftazidime with positively charged chitosan, resulting in uniform nanoparticles measuring approximately 40 nm in diameter, exhibiting high dispersity and excellent biocompatibility. Remarkably, these nanoparticles exhibited significant inhibition of P. aeruginosa growth, reduced pyocyanin production, and diminished biofilm formation, achieving a maximum inhibition rate of 22.44%. Furthermore, in vivo investigations demonstrated enhanced survival in mice with abdominal P. aeruginosa infection following treatment with CSCE nanoparticles, accompanied by reduced levels of inflammatory cytokines Interleukin-6 (125.79 ± 18.63 pg/mL), Interleukin-17 (125.67 ± 5.94 pg/mL), and Tumor Necrosis Factor-α (135.4 ± 11.77 pg/mL). Critically, mice treated with CSCE nanoparticles showed no presence of bacteria in the bloodstream following intraperitoneal P. aeruginosa infection. Collectively, our findings highlight the potential of these synthesized nanoparticles as effective agents against P. aeruginosa infections.

Biosynthesis approach of zinc oxide nanoparticles for aqueous phosphorous removal: physicochemical properties and antibacterial activities

In this study, phosphorus (PO43--P) is removed from water samples using zinc oxide nanoparticles (ZnO NPs). These nanoparticles are produced easily, quickly, and sustainably using Onion extracts (Allium cepa) at an average crystallite size of 8.13 nm using the Debye-Scherrer equation in the hexagonal wurtzite phase. The characterization and investigation of bio-synthesis ZnO NPs were carried out. With an initial concentration of 250 mg/L of P, the effects of the adsorbent dose, pH, contact time, and temperature were examined. At pH = 3 and T = 300 K, ZnO NPs achieved the optimum sorption capacity of 84 mg/g, which was superior to many other adsorbents. The isothermal study was found to fit the Langmuir model at a monolayer capacity of 89.8 mg/g, and the kinetic study was found to follow the pseudo-second-order model. The adsorption process was verified to be endothermic and spontaneous by thermodynamic characteristics. As a result of their low cost as an adsorbent and their high metal absorption, ZnO NPs were found to be the most promising sorbent in this investigation and have the potential to be used as effective sorbents for the removal of P from aqueous solutions. The antimicrobial activity results showed that ZnO NPs concentration had greater antibacterial activity than conventional Cefotaxime, which was utilized as a positive control in the inhibitory zone. However, no inhibitory zone was visible in the controlled wells that had been supplemented with onion extract and DMSO.

ZnO-Doped Metal-Organic Frameworks Nanoparticles: Antibacterial Activity and Mechanisms

Metal-Organic Frameworks (MOFs) offer new ideas for the design of antibacterial materials because of their antibacterial properties, high porosity and specific surface area, low toxicity and good biocompatibility compared with other nanomaterials. Herein, a novel antimicrobial nanomaterial, MIL-101(Fe)@ZnO, has been synthesized by hydrothermal synthesis and characterized by FTIR, UV-vis, ICP-OES, XRD, SEM, EDS and BET to show that the zinc ions are doped into the crystal lattice of MIL-101(Fe) to form a Fe-Zn bimetallic structure. MIL-101(Fe)@ZnO was found to be effective against a wide range of antibacterial materials including Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Acinetobacter baumannii, Acinetobacter junii and Staphylococcus epidermidis. It has a significant antibacterial effect, weak cytotoxicity, high safety performance and good biocompatibility. Meanwhile, MIL-101(Fe)@ZnO was able to achieve antibacterial effects by causing cells to produce ROS, disrupting the cell membrane structure, and causing protein leakage and lipid preoxidation mechanisms. In conclusion, MIL-101(Fe)@ZnO is an easy-to-prepare antimicrobial nanomaterial with broad-spectrum bactericidal activity and low toxicity.

Improved cotton fabrics properties using zinc oxide-based nanomaterials: A review

Zinc oxide nanoparticles (ZnO NPs) have gained significant attention in the textile industry for their ability to enhance the physicochemical properties of fabrics. In recent years, there has been a growing focus on the development of ZnO-based nanomaterials and their applications for cotton and other fabrics. This review paper provides an overview of the synthesis and diverse applications of ZnO-based nanomaterials for textile fabrics, including protection against UV irradiation, bacteria, fungi, microwave, electromagnetic radiation, water, and fire. Furthermore, the study offers the potential of these materials in energy harvesting applications, such as wearable pressure sensors, piezoelectric nanogenerators, supercapacitors, and human energy harvesting. Additionally, we discuss the potential of ZnO-based nanomaterials for environmental cleaning, including water, oil, and solid cleaning. The current research in this area has focused on various materials used to prepare ZnO-based nanocomposites, such as metals/nonmetals, semiconductors, metal oxides, carbon materials, polymers, MXene, metal-organic frameworks, and layered double hydroxides. The findings of this review highlight the potential of ZnO-based nanomaterials to improve the performance of textile fabrics in a range of applications, and the importance of continued research in this field to further advance the development and use of ZnO-based nanomaterials in the textile industry.

Paper-based colorimetric detection of COVID-19 using aptasenor based on biomimetic peroxidase like activity of ChF/ZnO/CNT nano-hybrid

Corona Virus Disease 2019 (COVID-19) as the infectious disease caused the pandemic disease around the world through infection by SARS-CoV-2 virus. The common diagnosis approach is Quantitative RT-PCR (qRT-PCR) which is time consuming and labor intensive. In the present study a novel colorimetric aptasensor was developed based on intrinsic catalytic activity of chitosan film embedded with ZnO/CNT (ChF/ZnO/CNT) on 3,3',5,5'-tetramethylbenzidine (TMB) substrate. The main nanocomposite platform was constructed and functionalized with specific COVID-19 aptamer. The construction subjected with TMB substrate and H₂O₂ in the presence of different concentration of COVID-19 virus. Separation of aptamer after binding with virus particles declined the nanozyme activity. Upon addition of virus concentration, the peroxidase like activity of developed platform and colorimetric signals of oxidized TMB decreased gradually. Under optimal conditions the nanozyme could detect the virus in the linear range of 1-500 pg mL and LOD of 0.05 pg mL. Also, a paper-based platform was used for set up the strategy on applicable device. The paper-based strategy showed a linear range between 50 and 500 pg mL with LOD of 8 pg mL. The applied paper based colorimetric strategy showed reliable results for sensitive and selective detection of COVID-19 virus with the cost-effective approach.

Preparation of gallotannin loaded chitosan/zinc oxide nanocomposite for photocatalytic degradation of organic dye and antibacterial applications

Chitosan functionalization is a growing field of interest to enhance the unique characteristics of metal oxide nanoparticles. In this study, a facile synthesis method has been used to develop a gallotannin loaded chitosan/zinc oxide (CS/ZnO) nanocomposite. Initially, white color formation confirmed the formation, and physico-chemical natures of the prepared nanocomposite were examined using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). Crystalline of CS amorphous phase and ZnO patterns were demonstrated by XRD. FTIR revealed the presence of CS and gallotannin bio-active groups in the formed nanocomposite. Electron microscopy study exhibited that the produced nanocomposite had an agglomerated sheets like morphology with an average size of 50-130 nm. Further, the produced nanocomposite was assayed for methylene blue (MB) degradation activity from aqueous solution. After 30 min of irradiation, the efficiency of nanocomposite degradation was found to be 96.64 %. Moreover, prepared nanocomposite showed a potential and concentration-dependent antibacterial activity against S. aureus. In conclusion, our findings revealed that prepared nanocomposite can be used as an excellent photocatalyst as well as a bactericidal agent in industrial and clinical sectors.

Fabrication of chitosan and Trianthema portulacastrum mediated copper oxide nanoparticles: Antimicrobial potential against MDR bacteria and biological efficacy for antioxidant, antidiabetic and photocatalytic activities

Biopolymer based metal oxide nanoparticles, prepared by eco-friendly approach, are gaining interest owing to their wide range of applications. In this study, aqueous extract of Trianthema portulacastrum was used for the green synthesis of chitosan base copper oxide (CH-CuO) nanoparticles. The nanoparticles were characterized through UV-Vis Spectrophotometry, SEM, TEM, FTIR and XRD analysis. These techniques provided evidence for the successful synthesis of the nanoparticles, having poly-dispersed spherical shaped morphology with average crystallite size of 17.37 nm. The antibacterial activity for the CH-CuO nanoparticles was determined against multi-drug resistant (MDR), Escherichia coli, Pseudomonas aeruginosa (gram-negative), Enterococcus faecium and Staphylococcus aureus (gram-positive). Maximum activity was obtained against Escherichia coli (24 ± 1.99 mm) while least activity was observed against Staphylococcus aureus (17 ± 1.54 mm). In-vitro analysis for biofilm inhibition, EPS and cell surface hydrophobicity showed >60 % inhibitions for all the bacterial isolates. Antioxidant and photocatalytic assays for the nanoparticles showed significant activities of radical scavenging (81 ± 4.32 %) and dye degradation (88 %), respectively. Antidiabetic activity for the nanoparticles, determined by in-vitro analysis of alpha amylase inhibition, showed enzyme inhibition of 47 ± 3.29 %. The study signifies the potential of CH-CuO nanoparticle as an effective antimicrobial agent against MDR bacteria along with the antidiabetic and photocatalytic activities.

Current Applications of Bionanocomposites in Food Processing and Packaging

Nanotechnology advances are rapidly spreading through the food science field; however, their major application has been focused on the development of novel packaging materials reinforced with nanoparticles. Bionanocomposites are formed with a bio-based polymeric material incorporated with components at a nanoscale size. These bionanocomposites can also be applied to preparing an encapsulation system aimed at the controlled release of active compounds, which is more related to the development of novel ingredients in the food science and technology field. The fast development of this knowledge is driven by consumer demand for more natural and environmentally friendly products, which explains the preference for biodegradable materials and additives obtained from natural sources. In this review, the latest developments of bionanocomposites for food processing (encapsulation technology) and food packaging applications are gathered.

Metal-Polymer Nanocomposites: A Promising Approach to Antibacterial Materials

There has been a new approach in the development of antibacterials in order to enhance the antibacterial potential. The nanoparticles are tagged on to the surface of other metals or metal oxides and polymers to achieve nanocomposites. These have shown significant antibacterial properties when compared to nanoparticles. In this article we explore the antibacterial potentials of metal-based and metal-polymer-based nanocomposites, various techniques which are involved in the synthesis of the metal-polymer, nanocomposites, mechanisms of action, and their advantages, disadvantages, and applications.

Zinc oxide loaded chitosan-elastin-sodium alginate nanocomposite gel using freeze gelation for enhanced adipose stem cell proliferation and antibacterial properties

Hydrogels have been the material of choice for regenerative medicine applications due to their biocompatibility that can facilitate cellular attachment and proliferation. The present study aimed at constructing a porous hydrogel composite scaffold (chitosan, sodium alginate and elastin) for the repair of chronic skin wounds. Chitosan-based hydrogel incorporating varying concentrations of zinc oxide nanoparticles i.e. ZnO-NPs (0, 0.001, 0.01, 0.1 and 1 % w/w) as the antimicrobial agent tested against Escherichia coli (E.coli) and Staphylococcus aureus (S. aureus) exhibited good antibacterial activities. ZnO-NPs were characterized by UV visible spectroscopy, Scanning electron microscopy (SEM) analysis, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. Fabricated gels were characterized by SEM analysis, FTIR, XRD, swelling ratio, degradation behavior and controlled release kinetics of ZnO-NPs. In vitro cytocompatibility of the composite was investigated using human adipose stem cells (ADSCs) by MTT and lactate dehydrogenase (LDH) assay, further assessed by SEM analysis and PKH26 staining. The SEM and XRD analysis confirmed the successful loading of ZnO-NPs into these scaffolds. Fluorescence PKH26 stained images and SEM analysis of ADSCs seeded scaffolds revealed biocompatible nature. The findings suggested that the developed composite gels have potential clinically for tissue engineering and chronic wound treatment.

Adsorption modelling and fixed-bed column study on milk processing industry wastewater treatment using chitosan zinc-oxide nano-adsorbent-coated sand filter bed

This study aims to develop a chitosan-zinc oxide nano-adsorbent-coated sand (CZOCS) filter bed for getting rid of milk processing industry wastewater (MPIW) in a safe way. Chitosan zinc oxide nano-adsorbent (CZnO) of 88.35 ± 2.89 d.nm size was used to coat naturally available sand through a calcination process at 200 °C for a heating rate of 5 °C/min. The characteristics of the diffraction peaks and functional groups are attributed to the nature of CZnO loading on the sand surface. The increase in breakthrough and exhaustion times is caused by the biological oxygen demand (BOD) and chemical oxygen demand (COD) of influent having more time to interact with the adsorbent as bed height increases, resulting in higher reduction efficiencies. Lower bed heights (10 cm) which saturate faster than higher bed heights (40 cm) result in a shorter mass transfer time. Adsorption capacity at the 95% column exhaustion point increased from 611.04 to 1089.63 mg/g for BOD and from 4512.29 to 5600.81 mg/g for COD. Different kinds of kinetic models have been used to forecast breakthrough curves employing experimental data. Statistical and error function parameters were used to choose the best-fit model. Among the models investigated, the Thomas model was shown to be the best-fit with the highest R-square values of 0.9942 and 0.9939. The CZOCS has high reusability and could be used for up to six cycles of organic pollutant adsorption. Aside from that, novel CZOCS could be used to clean real MPIW, and making it one of the most promising adsorbents.

Sunlight-driven antibacterial activity of a novel zinc oxide quantum dot and its optimization using Box-Behnken design-A medicament for communicable disease protective wearables

The current study focuses on microwave-assisted zinc oxide quantum dots synthesis (ZnO-QDs) from zinc oxide bionanocomposite (ZnO-BC) preparation. The novelty lies in the preparation of ZnO-QDs, since the natural elements present in ZnO-BC itself acted as a surface penetration enhancer without using any chemical agent. Under ultraviolet (UV) light ZnO-QDs emitted a blue glow, confirming the fluorescence property. Using Box-Behnken design, the experimental factors of ZnO-QDs were optimized, yielding a positive response of 350 nm absorbance and these results also matched with the UV-visible spectroscopy characterization studies of ZnO-QDs. Using Escherichia coli, the antibacterial activity of ZnO-BC in comparison to ZnO-QDs was determined using the well diffusion method and an inhibition zone ranging from 11 to 23 mm and in the broth assay the OD values were reduced by almost seven and 10 times for ZnO-BC and ZnO-QDs, respectively, when compared to the control (untreated). The antibacterial activity demonstrated that our newly prepared BC and its QDs have superior activity when compared to the standard antibiotics such as ampicillin. This type of nanomaterial can be used as a new bioactive natural material with light-assisted activity for antibacterial coatings in the manufacture of personal protective equipment.

Chitosan-Based Polymer Nanocomposites for Environmental Remediation of Mercury Pollution

Mercury is a well-known heavy metal pollutant of global importance, typically found in effluents (lakes, oceans, and sewage) and released into the atmosphere. It is highly toxic to humans, animals and plants. Therefore, the current challenge is to develop efficient materials and techniques that can be used to remediate mercury pollution in water and the atmosphere, even in low concentrations. The paper aims to review the chitosan-based polymer nanocomposite materials that have been used for the environmental remediation of mercury pollution since they possess multifunctional properties, beneficial for the adsorption of various kinds of pollutants from wastewater and the atmosphere. In addition, these chitosan-based polymer nanocomposites are made of non-toxic materials that are environmentally friendly, highly porous, biocompatible, biodegradable, and recyclable; they have a high number of surface active sites, are earth-abundant, have minimal surface defects, and are metal-free. Advances in the modification of the chitosan, mainly with nanomaterials such as multi-walled carbon nanotube and nanoparticles (Ag, TiO₂, S, and ZnO), and its use for mercury uptake by batch adsorption and passive sampler methods are discussed.

Composite Coating for the Food Industry Based on Fluoroplast and ZnO-NPs: Physical and Chemical Properties, Antibacterial and Antibiofilm Activity, Cytotoxicity

Bacterial contamination of meat products during its preparation at the enterprise is an important problem for the global food industry. Cutting boards are one of the main sources of infection. In order to solve this problem, the creation of mechanically stable coatings with antibacterial activity is one of the most promising strategies. For such a coating, we developed a composite material based on "liquid" Teflon and zinc oxide nanoparticles (ZnO-NPs). The nanoparticles obtained with laser ablation had a rod-like morphology, an average size of ~60 nm, and a ζ-potential of +30 mV. The polymer composite material was obtained by adding the ZnO-NPs to the polymer matrix at a concentration of 0.001-0.1% using the low-temperature technology developed by the research team. When applying a composite material to a surface with damage, the elimination of defects on a micrometer scale was observed. The effect of the composite material on the generation of reactive oxygen species (H₂O₂, •OH), 8-oxoguanine in DNA in vitro, and long-lived reactive protein species (LRPS) was evaluated. The composite coating increased the generation of all of the studied compounds by 50-200%. The effect depended on the concentration of added ZnO-NPs. The antibacterial and antibiofilm effects of the Teflon/ZnO NP coating against L. monocytogenes, S. aureus, P. aeruginosa, and S. typhimurium, as well as cytotoxicity against the primary culture of mouse fibroblasts, were studied. The conducted microbiological study showed that the fluoroplast/ZnO-NPs coating has a strong bacteriostatic effect against both Gram-positive and Gram-negative bacteria. In addition, the fluoroplast/ZnO-NPs composite material only showed potential cytotoxicity against primary mammalian cell culture at a concentration of 0.1%. Thus, a composite material has been obtained, the use of which may be promising for the creation of antibacterial coatings in the meat processing industry.

Preparation and Characterization of Phenolic Acid-Chitosan Derivatives as an Edible Coating for Enhanced Preservation of Saimaiti Apricots

In this study, caffeic acid (CA) and chlorogenic acid (CGA) were incorporated onto chitosan (CS) using free radical grafting initiated by a hydrogen peroxide/ascorbic acid (H₂O₂/Vc) redox system. The structural properties of the CA (CA-g-CS) and CGA (CGA-g-CS) derivatives were characterized by UV-Vis absorption, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and thermal stability analysis. Then, the antioxidant and antibacterial properties were evaluated, and the effect of CGA-g-CS on the postharvest quality of Saimaiti apricot was studied. It proved that phenolic acids were successfully grafted onto the CS. The grafting ratios of CA-g-CS and CGA-g-CS were 126.21 mg CAE/g and 148.94 mg CGAE/g. The antioxidation and antibacterial activities of CGA-g-CS were better than those of CA-g-CS. The MICs of CGA-g-CS against E. coli, S. aureus, and B. subtilis were 2, 1, and 2 mg/mL. The inhibitory zones of 20 mg/mL CGA-g-CS against the three bacteria were 19.16 ± 0.35, 16.33 ± 0.91, and 16.24 ± 0.05 mm. The inhibitory effects of 0.5% CGA-g-CS on the firmness, weight loss, SSC, TA, relative conductivity, and respiration rate of the apricot were superior. Our results suggest that CGA-g-CS can be potentially used as an edible coating material to preserve apricots.

Catalytic dye degradation by novel phytofabricated silver/zinc oxide composites

Phytofabrication of the nanoparticles with exotic shape and size is an attractive area where nanostructures with noteworthy physicochemical and optoelectronic properties that can be significantly employed for photocatalytic dye degradation. In this study a medicinal plant, Plumbago auriculata leaf extract (PALE) was used to synthesize zinc oxide particles (ZnOPs) and silver mixed zinc oxide particles (ZnOAg1Ps, ZnOAg10Ps, ZnO10Ag1Ps) by varying the concentration of the metal precursor salts, i.e. zinc acetate and silver nitrate. The PALE showed significantly high concentrations of polyphenols, flavonoids, reducing sugar, starch, citric acid and plumbagin up to 314.3 ± 0.33, 960.0 ± 2.88, 121.3 ± 4.60, 150.3 ± 3.17, 109.4 ± 2.36, and 260.4 ± 8.90 μg/ml, respectively which might play an important role for green synthesis and capping of the phytogenic nanoparticles. The resulting particles were polydispersed which were mostly irregular, spherical, hexagonal and rod like in shape. The pristine ZnOPs exhibited a UV absorption band at 352 nm which shifted around 370 in the Ag mixed ZnOPs with concomitant appearance of peaks at 560 and 635 nm in ZnO10Ag1Ps and ZnOAg1Ps, respectively. The majority of the ZnOPs, ZnOAg1Ps, ZnOAg10Ps, and ZnO10Ag1Ps were 407, 98, 231, and 90 nm in size, respectively. Energy dispersive spectra confirmed the elemental composition of the particles while Fourier transform infrared spectra showed the involvement of the peptide and methyl functional groups in the synthesis and capping of the particles. The composites exhibited superior photocatalytic degradation of methylene blue dye, maximum being 95.7% by the ZnOAg10Ps with a rate constant of 0.0463 s−1 following a first order kinetic model. The present result clearly highlights that Ag mixed ZnOPs synthesized using Plumbago auriculata leaf extract (PALE) can play a critical role in removal of hazardous dyes from effluents of textile and dye industries. Further expanding the application of these phytofabricated composites will promote a significant complementary and alternative strategy for treating refractory pollutants from wastewater.

Marine polysaccharide laminarin embedded ZnO nanoparticles and their based chitosan capped ZnO nanocomposites: Synthesis, characterization and in vitro and in vivo toxicity assessment

In the current scenario where more and more products containing nanomaterials are on the technological or pharmaceutical market, it is crucial to have a thorough knowledge of their toxicity before proposing possible applications. A proper analysis of the toxicity of the nanoproducts should include both in vitro and in vivo biological approaches and should consider that the synthesis and purification methods of nanomaterials may affect such toxicity. In the current work, the green synthesis of laminarin embedded ZnO nanoparticles (Lm-ZnO NPs) and their based chitosan capped ZnO nanocomposites (Ch-Lm-ZnO NCmps) is described for the first time. Furthermore, the evaluation of their in vitro cytotoxicity, phytotoxicity, and in vivo (Zebrafish embryo) toxicity was described. First, the green synthesized Lm-ZnO NPs and Ch-Lm-ZnO NCmps were fully physicochemically characterized. Lm-ZnO NPs were greatly agglomerated and had a spindle morphology ranging from 100 to 350 nm, while Ch-Lm-ZnO NCmps had irregular rod shape with flake-like structure clusters randomly aggregated with diverse sizes ranging from 20 to 250 nm. The in vitro cytotoxicity assessment of the green synthesized Lm-ZnO NPs and Ch-Lm-ZnO NCmps was carried out in normal human dermal fibroblasts (HDF) cells and human colon cancer (HT-29) cells by MTT assay. Lm-ZnO NPs and Ch-Lm-ZnO NCmps (0.1-500 μg/mL), significantly inhibited the viability of both cell lines, revealing dose-dependent cytotoxicity. Besides, the Lm-ZnO NPs and Ch-Lm-ZnO NCmps significantly affected seed germination and roots and shoots length of mung (Vigna radiata). Moreover, the zebrafish embryo toxicity of Lm-ZnO NPs and Ch-Lm-ZnO NCmps among the various concentrations used (0.1-500 μg/mL) caused deformities, increased mortality and decreased the survival rate of zebrafish embryo dose-dependently.

Synthesis of novel chitosan Schiff base and its ZnO nanocomposite for removal of synthetic dye, antimicrobial, and cytotoxicity activity

In this work, a novel chitosan Schiff base 4-(2-Hydroxyaniline)pent-3-en-2-one chitosan (2-HyA-CS) and its ZnO nanocomposite (2-HyA-CS/ZnO) were sensitized and characterized by appropriate methods; FTIR, XRD, Elemental analysis, SEM, TEM and TGA. The result of characterization methods confirms the preparation of 2-HyA-CS and 2-HyA-CS/ZnO. The SEM images reveal that chitosan, 2-HyA-CS, and 2-HyA-CS/ZnO have a varied roughness and porous surfaces. The reason for this difference was attributed to the formation of Schiff base 2-HyA-CS and the presence of ZnO nanoparticles in 2-HyA-CS/ZnO. The patterns of XRD and FTIR confirm the formation of 2-HyA-CS and 2-HyA-CS/ZnO. The degree of substitution (DS) of modified chitosan 2-HyA-CS was calculated using Elemental analysis and FTIR.ATR, it was found to be 74%. The adsorption efficiency of the produced adsorbents was compared with pure chitosan to remove of Remazol Brilliant Blue R (RBBR) from an aqueous medium and antimicrobial activity. The removal percentage of RBBR by chitosan, 2-HyA-CS, and 2-HyA-CS/ZnO are 47.12%, 91.9%, and 96.56%, respectively with the following order: 2-HyA-CS/ZnO > 2-HyA-CS > chitosan. Their antimicrobial activities were studied against two Gram negative bacteria ( E. coli and P. aeruginosa), two Gram positive bacteria ( S. aureus and B. cereus) and ( C. albicans) as a yeast strain, the inhibitory zone measurements revealed that the activity of 2-HyA-CS/ZnO is excellent and higher than 2-HyA-CS and pure chitosan. The cytotoxicity of the prepared compound 2-HyA-CS and 2-HyA-CS/ZnO along with pure chitosan was estimated against two human cancer cells MCF-7 cells and HepG-2 cells, the result indicates that 2-HyA-CS/ZnO having higher Inhibitory activity against both MCF-7 and HepG-2 cells with 53.5 ± 2.86 and 27.4 ± 1.23 µg/mL respectively and 2-HyA-CS possessing moderate Inhibitory activity against both MCF-7 and HepG-2 cancer cells with IC50 = 216.5 ± 7.48 and 135.6 ± 6.49 µg/ml respectively.

Evaluation of sulfonated oxidized chitosan antifungal activity against Fusarium graminearum

Chitosan biomaterials are widely used in the biological area because of their broad-spectrum antibacterial activity. However, chitosan cannot be dissolved in a neutral solution, limiting its application in various fields seriously. In this study, water-soluble sulfonated oxidized chitosan (SOCS) with antifungal activity were prepared by oxidization and sulfonation. Its structure was clearly confirmed by spectroscopy data (FTIR, 1H NMR, ¹³C NMR) and elemental analysis. SEM images of OCS and SOCS revealed that there was a little curly and an irregular sheet-like morphologies on them which was attributed to the oxidation and sulfonation on CS. Moreover, the FTIR and NMR indicated that -OH on the CS was oxidized into -COOH on the OCS and -SO₃H groups on the SOCS. The EDS results of OCS and SOCS confirmed the presence of the oxygen element in OCS and the S element in SOCS. All studies confirmed the OCS and SOCS were synthesized successfully. Furthermore, the inhibitory activity of SOCS biocomposites against plant pathogenic fungi, (Fusarium graminearum), was investigated. The results showed that the SOCS have significant inhibitory effects on the mycelial growth of F. graminearum. The EC₅₀ value of SOCS against F. graminearum is 79.46 μg/mL. The research results presented above indicated that SOCS can be used as a candidate material for the control of plant pathogenic fungi, and can broaden the application of chitosan materials in plant protection and sustainable agriculture.Research highlightsSOCS showed better solubility in deionized water.The antifungal effect of SOCS dissolved in acetic acid was higher than that of CS dissolved in acetic acid.SOCS dissolved in water can cause an inhibitory effect on F. graminearum at lower concentrations.

Microwave-assisted synthesis of Ag/ZnO nanoparticles using Averrhoa carambola fruit extract as the reducing agent and their application in cotton fabrics with antibacterial and UV-protection properties

This is the first time Averrhoa carambola fruit extract has been used as a reducing agent to synthesize Ag/ZnO composites for coating cotton to develop antibacterial activity and UV protection under domestic microwave irradiation. The effects of the molar concentration of silver nitrate solutions, applied power, reaction duration, and pH on the yield of nanoparticles were determined. The treated fabrics were subjected to the investigation of surface morphology and chemical structure using SEM and EDX techniques, respectively. The antibacterial activity of the ZnO NPs and the Ag/ZnO nanocomposite coated on cotton fabric was evaluated against E. coli and S. aureus using the agar well diffusion method. The results revealed good antibacterial activity in the cotton fabric treated with the Ag-doped ZnO composite. The stability of the Ag/ZnO nanocomposite coated fabrics was determined by a wash durability test, the results of which demonstrated that this fabric could retain good antibacterial activity even after 20 wash cycles. The UV-blocking capacity of the treated fabrics was evaluated based on the ultraviolet protection factor (UPF) value determined in the range of 280-400 nm. The UPF value determined for the Ag/ZnO-coated fabric was 69.67 ± 1.53, which indicated an excellent ability to block UV radiation. Collectively, these results demonstrated the Ag/ZnO nanocomposite prepared in the present study as a promising material for preparing textiles with good antibacterial activity and UV protection.

An Overview on the Recent Advances in the Treatment of Infected Wounds: Antibacterial Wound Dressings

A wound can be surgical, cuts from an operation or due to accident and trauma. The infected wound, as a result of bacteria growth within the damaged skin, interrupts the natural wound healing process and significantly impacts the quality of life. Wound dressing is an important segment of the skincare industry with its economic burden estimated at $ 20.4 billion (in 2021) in the global market. The results of recent clinical trials suggest that the use of modern dressings can be the easiest, most accessible, and most cost-effective way to treat chronic wounds and, hence, holds significant promise. With the sheer number of dressings in the market, the selection of correct dressing is confusing for clinicians and healthcare workers. The aim of this research was to review widely used types of antibacterial wound dressings, as well as emerging products, for their efficiency and mode of action. In this review, we focus on introducing antibiotics and antibacterial nanoparticles as two important and clinically widely used categories of antibacterial agents. The perspectives and challenges for paving the way for future research in this field are also discussed. This article is protected by copyright. All rights reserved.

Facile fabrication of ternary MWCNTs/ZnO/Chitosan nanocomposite for enhanced photocatalytic degradation of methylene blue and antibacterial activity

Developing a cheap, stable and effective photocatalyst is necessary for remediation of persistent organic pollutants. To address this challenge, we proposed a unique interfacial engineering technique and proper bandgap matching strategy to synthesize MWCNTs/ZnO/Chitosan ternary nanocomposite for effective photocatalytic application. The features of the prepared samples were determined by FESEM, TEM, EDX, elemental mapping, AFM, FT-IR, XRD, UV-Vis spectroscopy and BET surface analysis. The obtained results showed successful fabrication of synthesized nanocomposites with enhanced surface area. Degradation effect of nanostructures on methylene blue (MB) and antibacterial activity against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Bacillus subtilis (B. subtilis) pathogenic strains were investigated. The proposed photocatalytic mechanism illustrated the electron transfer facilitated by MWCNTs/ZnO/Chitosan structure which results in spatial separation of electron-hole pairs. Compared with ZnO and ZnO/Chitosan, the prepared MWCNTs/ZnO/Chitosan ternary nanocomposite showed high usage of UV illumination and superior separation of photogenerated electron-hole pairs. MWCNTs/ZnO/Chitosan illustrated 86.26% adsorption rate and outstanding increased photocatalytic activity on MB degradation efficiency of 98.76% after 20 min. Stability of photocatalyst reached from 98.76% initial decolorization to 85% at the fourth cycle. In addition, the ternary nanocomposite also exhibited remarkable bactericidal activity against gram-positive (S. aureus) and (B. subtilis) and gram-negative (E. coli) bacteria strains. Due to the obtained results, the prepared nanocomposite would be an efficient candidate photocatalyst with antibacterial properties.

Sustainable Green Nanotechnologies for Innovative Purifications of Water: Synthesis of the Nanoparticles from Renewable Sources

Polluting the natural water resources is a serious global issue, which is confirmed by the fact that today at least 2 billion people consume water from contaminated sources. The conventional wastewater treatment methods cannot effectively remove the persistent pollutants (e.g., drugs, organic dyes, pesticides) from the aqueous environment. Heterogeneous photocatalysis is a promising and sustainable alternative for water remediation. It is based on the interaction between light irradiation and the semiconductors (e.g., TiO₂, ZnO) as photocatalysts, but these compounds, unfortunately, have some disadvantages. Hence, great attention has been paid to the nanotechnology as a possible way of improvement. Nanomaterials have extraordinary properties; however, their conventional synthesis is often difficult and requires a significant amount of dangerous chemicals. This concise topical review gives recent updates and trends in development of sustainable and green pathways in the synthesis of nanomaterials, as well as in their application for water remediation. In our review we put emphasis on the eco-friendly, mostly plant extract-based materials. The importance of this topic, including this study as well, is proved by the growing number of publications since 2018. Due to the current serious environmental issues (e.g., global warming, shortage of pure and quality water), it is necessary for the traditional TiO₂ and ZnO semiconductors to be replaced with the harmless, non-toxic, and more powerful nanocomposites as photocatalysts. Not only because of their higher efficiency as compared to the bulk semiconductors, but also because of the presence of biomolecules that can add up to the pollutant removal efficiency, which has been already confirmed in many researches. However, despite the fact that the application of heterogeneous photocatalysis together with green nanotechnology is absolutely the future in water purification, there are some challenges which have to be overcome. The exact effects of the biomolecules obtained from plants in the synthesis of nanoparticles, as well as in the photocatalytic processes, are not exactly known and require further investigation. Furthermore, heterogeneous photocatalysis is a well-known and commonly examined process; however, its practical use outside the laboratory is expensive and difficult. Thus, it has to be simplified and improved in order to be available for everyone. The aim of our review is to suggest and prove that using these bio-inspired compounds it is possible to reduce human footprint in the nature.

Unlocking the potential of biosynthesized zinc oxide nanoparticles for degradation of synthetic organic dyes as wastewater pollutants

The azo dyes released into water from different industries are accumulating in the water bodies and bioaccumulating within living systems thereby affecting environmental health. This is a major concern in developing countries where stringent regulations are not followed for the discharge of industrial waste into water bodies. This has led to the accumulation of various pollutants including dyes. As these developing countries also face acute water shortages and due to the lack of cost-effective systems to remove these pollutants, it is essential to remove these toxic dyes from water bodies, eradicate dyes, or generate fewer toxic derivatives. The photocatalysis mechanism of degradation of azo dyes has gained importance due to its eco-friendly and non-toxic roles in the environment. The zinc nanoparticles act as photocatalysts in combination with plant extracts. Plant-based nanoparticles over the years have shown the potential to degrade dyes efficiently. This is carried out by adjusting the dye and nanoparticle concentrations and combinations of nanoparticles. Our review article considers increasing the efficiency of degradation of dyes using zinc oxide (ZnO) nanoparticles and understanding the photocatalytic mechanisms in the degradation of dyes and the toxic effects of these dyes and nanoparticles in different tropic levels.

Facile synthesis and characterization of chitosan/zinc oxide nanocomposite for enhanced antibacterial and photocatalytic activity

In this report, chitosan/zinc oxide (CS/ZnO) nanocomposite was synthesized using Sida acuta and assessed their antibacterial and photocatalytic properties. The formation of CS/ZnO nanocomposite was preliminary confirmed by colour change and UV-visible spectroscopy. The crystalline peaks related to CS and ZnO in CS/ZnO nanocomposite were demonstrated by XRD. Morphological analysis through FE-SEM and TEM showed a rod like appearance for ZnO NPs and agglomerated grains with rod shaped morphology was observed for the CS/ZnO nanocomposite. The peaks around 400-800 cm^-1 in the IR spectrum of nanocomposite indicated the vibrations of metal-oxygen (ZnO), whereas bands at 1659 cm^-1 and 1546 cm^-1 indicated the presence of amine groups, which confirms the CS in the synthesized CS/ZnO nanocomposite. The CS/ZnO nanocomposite exhibited remarkable growth inhibition activity against B. subtilis and E. coli with 22 ± 0.3 and 16.5 ± 0.5 mm zone of inhibitions. In addition, CS/ZnO nanocomposite treated cotton fabrics also exhibited antibacterial activity against B. subtilis and E. coli. Furthermore, the ZnO NPs and nanocomposite showed time depended photodegradation activity and revealed 76% and 91% decomposition of CR under sunlight irradiation. In conclusion, our study revealed that the functionalization of biopolymer CS to the inorganic ZnO enhances the bio and catalytic properties.

Synthesis and characterization of chitosan encapsulated zinc oxide (ZnO) nanocomposite and its biological assessment in pepper (Capsicum annuum) as an elicitor for in vitro tissue culture applications

Nanotechnology paves the way for introducing nanoscale fertilizers, pesticides, and elicitors. This study intends to address the synthesis of chitosan/zinc oxide nanocomposite (CS-ZnONP) and its biological assessment in in-vitro conditions. The zinc oxide nanoparticles (ZnONPs) were successfully coated with the chitosan (CS) polymer through a cost-effective approach. Transmission electron microscopy and Fourier transform infrared spectroscopy assessments proved the surface capping of chitosan polymer on ZnONP. The nanocomposite was more capable of improving growth and biomass than the bare ZnONPs. The application of the nanocomposite increased the concentration of chlorophylls (51%), carotenoids (70%), proline (2-fold), and proteins (about 2-fold). The supplementation of culture medium with the nanomaterials upregulated enzymatic antioxidant biomarkers (catalase and peroxidase). The activity of the phenylalanine ammonia-lyase enzyme also displayed a similar significant upward trend in response to the nano-supplements. The CS-ZnONP treatment considerably enhanced the accumulation of alkaloids (60.5%) and soluble phenols (40%), implying stimulation in secondary metabolism. The micropropagation test revealed that the CS-ZnONP treatment improved the organogenesis performance. Overall, the nanocomposite can be considered a highly potent biocompatible elicitor.

Mussel-Inspired Ag NPs Immobilized on Melamine Sponge for Reduction of 4-Nitrophenol, Antibacterial Applications and Its Superhydrophobic Derivative for Oil-Water Separation

A functional material integrated with a variety of functions is highly desired in wastewater treatment. In this research, a mussel-inspired method of immobilizing silver nanoparticles on the skeleton of a melamine sponge is proposed and applied for water remediation. Ag NPs were reduced in situ and grown on a polydopamine-modified melamine sponge. The catalytic reduction of 4-nitrophenol (4-NP) in the presence of the obtained MS-PDA-Ag was evaluated, and the results demonstrated that the MS-PDA-Ag presented high catalytic reduction activity. In addition, the monolithic MS-PDA-Ag presents excellent reusability with no remarkable decrease in catalytic efficiency after multiple reuses. Owing to the immobilized Ag NPs, the MS-PDA-Ag can also effectively inhibit the growth of bacteria against both gram-positive and gram-negative species, making it possible for bacteria elimination in polluted water. To further explore the possibility of utilizing the MS-PDA-Ag for versatile applications, a superhydrophobic derivative (S-MS-PDA-Ag) was prepared by coating a low-surface-energy substance (octadecanethiol) on the surface of MS-PDA-Ag. The obtained S-MS-PDA-Ag presents the capacities of oil/organics adsorption and water repellence, which can separate the insoluble oil/organics from water. The melamine sponge immobilized with Ag NPs demonstrates prominent catalytic reduction of 4-NP, antibacterial activity and the superhydrophobic derivative presents the capacity of insoluble oil/organics separation from oil-water mixtures, exhibiting high potential in the remediation of polluted water.