Development of sodium alginate/glycerol/tannic acid coated cotton as antimicrobial system

Surface Immobilization of Oxidized Carboxymethyl Cellulose on Polyurethane for Sustained Drug Delivery

Polyurethane (PU) has a diverse array of customized physical, chemical, mechanical, and structural characteristics, rendering it a superb option for biomedical applications. The current study involves modifying the polyurethane surface by the process of aminolysis (aminolyzed polyurethane; PU-A), followed by covalently immobilizing Carboxymethyl cellulose (CMC) polymer utilizing Schiff base chemistry. Oxidation of CMC periodically leads to the creation of dialdehyde groups along the CMC chain. When the aldehyde groups on the OCMC contact the amine group on a modified PU surface, they form an imine bond. Scanning electron microscopy (SEM), contact angle, and X-ray photoelectron spectroscopy (XPS) techniques are employed to analyze and confirm the immobilization of OCMC on aminolyzed PU film (PU-O). The OCMC gel incorporates Nitrofurantoin (NF) and immobilizes it on the PU surface (PU-ON), creating an antibacterial PU surface. The confirmation of medication incorporation is achieved using EDX analysis. The varying doses of NF have demonstrated concentration-dependent bacteriostatic and bactericidal effects on both Gram-positive and Gram-negative bacteria, in addition to sustained release. The proposed polyurethane (PU-ON) surface exhibited excellent infection resistance in in vivo testing. The material exhibited biocompatibility and is well-suited for biomedical applications.

Development of a multifunctional active food packaging membrane based on electrospun polyvinyl alcohol/chitosan for preservation of fruits

To mitigate environmental impacts in food preservation, the development of a multifunctional membrane for packaging is of importance. In this study, we have successfully fabricated a nanofibrous membrane using an eco-friendly electrospinning technique, comprising polyvinyl alcohol (PVA), chitosan (CS), and tannic acid (TA). The resulting nanofibrous membranes were crosslinked with glutaraldehyde (GA) and surface modified with ZnO. Our findings demonstrate that the crosslinking process enhances water resistance, reduces water vapor permeability, improves tensile strength (from 3 to 18 MPa), and enhances thermal stability (increasing decomposition temperature from 225 °C to 310 °C). Furthermore, the incorporation of TA and ZnO provides antioxidant properties to the membrane, effectively preventing food decomposition caused by UV-induced oxidation. Additionally, CS, TA, and ZnO synergistically exhibit a remarkable antibacterial effect with a bacteriostasis rate exceeding 99.9 %. The strawberry fresh-keeping experiment further confirms that our developed membrane significantly extends shelf life by up to 6 days. Moreover, cytotoxicity assays confirm the non-toxic nature of these membranes. The innovative significance of this study lies in proposing a robust GA-PVA/CS/TA@ZnO nanofibrous membrane with excellent mechanical properties, biocompatibility, and multiple functionalities including antibacterial, anti-ultraviolet, and anti-oxidation capabilities. It has tremendous potential for applications in active food packaging materials.

Spray-assisted layer-by-layer deposition of quaternized chitosan/tannic acid for the construction of multifunctional bio-based nonwoven dressings

Gauze wound dressings have received considerable attention due to their cost-effectiveness, excellent mechanical properties, and widespread applications. However, their inability to actively combat microorganisms and effectively scavenge free radicals results in suboptimal wound management. In this study, a novel nonwoven-based gauze dressing coated with quaternized chitosan/tannic acid (QCS/TA), based on electrostatic interaction and hydrogen bonding, was successfully prepared using a spray-assisted layer-by-layer assembly method. The bio-based nonwoven dressing, assembled with multiple interlacing bilayers, demonstrated outstanding antimicrobial properties, eliminating 99.99 % of Staphylococcus aureus (S. aureus) and 85 % of Escherichia coli (E. coli). Compared to the pristine nonwoven dressing, the QCS/TA-coated nonwoven dressing scavenged >85 % of the surrounding radicals within 2 h. Additionally, the nonwoven dressing exhibits excellent coagulation properties. Notably, the facile spraying procedure preserved most of the softness and breathability of the nonwoven substrate. After the deposition of seven bilayers, the bending stiffness and drape coefficient increased by only 37.63 % and 3.85 %, respectively, while the air permeability and moisture permeability reached 1712 mm/s and 3683.58 g/m2/d, respectively. This bio-based nonwoven dressing, derived from safe and non-toxic ingredients, holds promise as the next generation of multifunctional gauze dressings.

Antibacterial, antioxidant, Cr(VI) adsorption and dye adsorption effects of biochar-based silver nanoparticles‑sodium alginate-tannic acid composite gel beads

Ultrasonic extraction of Osmanthus fragrans was used for reducing Ag+ to prepare AgNPs, which were further loaded on barley distiller's grains shell biochar. By supplementary of sodium alginate and tannic acid, composite gel beads were prepared. The physical properties of biochar-based AgNPs‑sodium alginate-tannic acid composite gel beads (C-Ag/SA/TA) were characterized. SEM, FTIR, and XRD showed that biochar-based AgNPs were compatible with sodium alginate-tannic acid. CAg greatly improved the dissolution, swelling, and expansion of gel beads. Through the analysis by the agar diffusion method, C-Ag/SA/TA gel beads had high antibacterial activity (inhibition zone: 22 mm against Escherichia coli and 20 mm against Staphylococcus aureus). It was observed that C-Ag/SA/TA composite gel beads had high antioxidant capacity and the free radical scavenging rate reached 89.0 %. The dye adsorption performance of gel beads was studied by establishing a kinetic model. The maximum adsorption capacities of C-Ag/SA/TA gel beads for methylene blue and Congo red were 166.57 and 318.06 mg/g, respectively. The removal rate of Cr(VI) reached 96.4 %. These results indicated that the prepared composite gel beads had a high adsorption capacity for dyes and metal ions. Overall, C-Ag/SA/TA composite gel beads were biocompatible and had potential applications in environmental pollution treatment.

Techniques, applications and prospects of polysaccharide and protein based biopolymer coatings: A review

The growing relevance of sustainable materials has recently led to the exploration of naturally derived biopolymeric hydrogels as coating materials due to their biodegradability, biocompatibility, ease of fabrication and modification. Although many review articles exist on biopolymeric coatings, they mainly focus on a specific polysaccharide, protein biopolymer, or a particular application- biomedical engineering or food preservation. The current review first summarizes the commonly used polysaccharide and protein-based biopolymers like chitosan, alginate, carrageenan, pectin, cellulose, starch, pullulan, agarose and silk fibroin, gelatin, respectively, with a systematic description of the techniques widely used for physical coating on substrates. Then, broad applications of these biopolymeric coatings on various substrates in biomedical engineering- 3D scaffolds, biomedical implants, and nanoparticles are described in detail. It also entails the application of biopolymeric coatings for food preservation in the form of food packaging and edible coatings. A brief discussion on the newly discovered interest in exploring biopolymers for anticorrosive coating applications is also included. Finally, concluding remarks on the role of biopolymer microstructures in forming homogeneous coatings, prospective alternatives to the currently used biopolymers as coating material and the advent of computer-aided technologies to expedite experimental findings are presented.

Composite Microparticles from Microfluidics for Chemo-/Photothermal Therapy of Hepatocellular Carcinoma

Hydrogel microcarrier-based drug delivery systems are of great value in the combination therapy of tumors. Current research directions concentrate on the development of more economic, convenient, and effective combined therapeutic platforms. Herein, we developed novel adhesive composite microparticles (MPPMD) with combined chemo- and photothermal therapy ability via microfluidic electrospray technology for local hepatocellular carcinoma treatment. These composite microparticles consisted of doxorubicin (DOX)-loaded and polydopamine-wrapped mesoporous silicon and alginate. Benefiting from such a strategy of hierarchical structure drug loading, DOX could be gradually released from the system, effectively avoiding the direct toxicity of chemotherapeutics to the body. Additionally, the designed microparticles could not only effectively treat tumors by releasing the chemotherapy drug DOX but also show excellent photothermal properties under the irradiation of near-infrared light, achieving combined chemo- and photothermal treatment effects. Based on these advantages, the MPPMD could remarkably eliminate tumor cells in vitro and enormously restrict tumor development in vivo. These results illustrate that such composite microparticles are ideal combination treatment platforms, possessing promising expectations for cancer therapy.

Development of CO2-sensitive antimicrobial bilayer films based on gellan gum and sodium alginate/sodium carboxymethyl cellulose and its application in strawberries

To effectively extend the shelf life of fruits meanwhile facilitating consumers to judge their freshness, in this work, a double-layer multifunctional film combining CO2 sensitivity and antibacterial properties was successfully prepared by adding methyl red (MR), bromothymol blue (BTB) into gellan gum (GG) as the sensing inner layer, and doping tannic acid (TA) into sodium alginate with sodium carboxymethyl cellulose (CMC) as the antimicrobial outer layer, which was applied to the freshness indication of strawberries. Microscopic morphology and spectral analysis demonstrated that the bi-layer films were fabricated successfully. The mechanical characteristics, thermal stability, water vapor resistance, and antibacterial capabilities of the bilayer films improved as TA concentration rose. They exhibited noticeable color changes at pH = 2-10 and different concentrations of CO2. Application of the prepared films to strawberries revealed that the GG-MB@SC-6%TA film performed most favorably under 4 °C storage conditions, not only monitoring strawberry freshness but also retaining high soluble solids and titratable acidity, resulting in a slight decrease in hardness and weight loss. Therefore, taking into account all of the physical-functional characteristics, the GG-MB@6%TA film has a broad application prospect for intelligent food packaging.

Alginate based biomaterials for hemostatic applications: Innovations and developments

Development of the efficient hemostatic materials is an essential requirement for the management of hemorrhage caused by the emergency situations to avert most of the casualties. Such injuries require the use of external hemostats to facilitate the immediate blood clotting. A variety of commercially available hemostats are present in the market but most of them are associated with limitations such as exothermic reactions, low biocompatibility, and painful removal. Thus, fabrication of an ideal hemostatic composition for rapid blood clot formation, biocompatibility, and antimicrobial nature presents a real challenge to the bioengineers. Benefiting from their tunable fabrication properties, alginate-based hemostats are gaining importance due to their excellent biocompatibility, with >85 % cell viability, high absorption capacity exceeding 500 %, and cost-effectiveness. Furthermore, studies have estimated that wounds treated with sodium alginate exhibited a blood loss of 0.40 ± 0.05 mL, compared to the control group with 1.15 ± 0.13 mL, indicating its inherent hemostatic activity. This serves as a solid foundation for designing future hemostatic materials. Nevertheless, various combinations have been explored to further enhance the hemostatic potential of sodium alginate. In this review, we have discussed the possible role of alginate based composite hemostats incorporated with different hemostatic agents, such as inorganic materials, polymers, biological agents, herbal agents, and synthetic drugs. This article outlines the challenges which need to be addressed before the clinical trials and give an overview of the future research directions.

Zn Anode Surviving Extremely Corrosive Polybromide Environment with Alginate-Graphene Oxide Hydrogel Coating

Zinc-bromine (Zn-Br) redox provides a high energy density and low-cost option for next-generation energy storage systems, and polybromide diffusion remains a major issue leading to Zn anode corrosion, dendrite growth, battery self-discharge and limited electrochemical performance. A dual-functional Alginate-Graphene Oxide (AGO) hydrogel coating is proposed to prevent polybromide corrosion and suppress dendrite growth in Zn-Br batteries through negatively charged carboxyl groups and enhanced mechanical properties. The battery with anode of plain zinc coated with AGO (Zn]AGO) survives a severely corrosive environment with higher polybromide concentration than usual without a membrane, and achieves 80 cycles with 100% Coulombic and 80.65% energy efficiencies, four times compared to plain Zn anode. The promising performance is comparable to typical Zn-Br batteries using physical membranes, and the AGO coating concept can be well adapted to various Zn-Br systems to promote their applications.

Robust integration of light-driven carbon quantum dots with bacterial cellulose enables excellent mechanical and antibacterial biodegradable yarn

Due to the overuse of antimicrobial drugs, bacterial resistance became an urgent problem to be solved. In this study, carbon quantum dots (CQDs) with high photodynamic antibacterial activity were synthesized by a one-pot hydrothermal method and introduced into bacterial cellulose (BC) dispersion solution. Through a wet-spinning and wet-twisting processing strategy, bionic ordering nanocomposite macrofiber (BC/CQDs-based yarn) based on BC were obtained. The results showed that BC/CQDs-based yarn had excellent tensile strength (226.8 MPa) and elongation (22.2 %). Utilizing the light-driven generation of singlet oxygen (1O2) and hydroxyl radical (·OH), BC/CQDs-based yarn demonstrated remarkable antibacterial efficacy, with 99.9999 % (6 log, P < 0.0001) and 96.54 % (1.46 log, P < 0.0004) effectiveness against E. coli and S. aureus, respectively. At the same time, BC/CQDs-based yarn also displayed the characteristics of photothermal, fluorescent, and biodegradability. In summary, the application potential of BC/CQDs-based yarn is significant, opening up a new strategy for the development of sustainable green weaving and bio-based multi-function yarn.

Hyaluronic acid/tannic acid films for wound healing application

In this study, thin films based on hyaluronic acid (HA) with tannic acid (TA) were investigated in three different weight ratios (80HA/20TA, 50HA/50TA, 20HA/80TA) for their application as materials for wound healing. Surface free energy, as well as their roughness, mechanical properties, water vapor permeability rate, and antioxidant activity were determined. Moreover, their compatibility with blood and osteoblast cells was investigated. The irritation effect caused by hyaluronic acid/tannic acid films was also considered with the use of are constructed human epidermis model. The irritation effect for hyaluronic acid/tannic acid films by the in vitro method was also studied. The low surface free energy, surface roughness, and antioxidant activity presented by the obtained films were examined. All the tested compositions of hyaluronic acid/tannic acid films were hemocompatible, but only films based on 50HA/50TA were fully cytocompatible. Regarding the potential implantation, all the films except 80HA/20TA showed appropriate mechanical properties. The specimens did not exert the irritation effect during the studies involving reconstructed human epidermis.

Tannic Acid and Ca2+ Double-Crosslinked Alginate Films for Passion Fruit Preservation

In this study, the interaction of different concentrations of tannic acid (TA) (10%, 20%, and 30% w/w) and Ca2+ with alginate (SA) was utilized to create double-crosslinked SA films. The resulting films were evaluated for their optical, mechanical, water resistance, and barrier properties, and their microstructure and intermolecular interactions were also characterized. The SA films containing 20% TA showed the best mechanical properties, with an observed increase in tensile strength of 22.54%. In terms of water vapor permeability, the SA film containing 30% TA exhibited the highest barrier property, which was 25.36% higher than that of the pure SA film. Moreover, TA demonstrated a strong UV absorption ability, resulting in a nearly 0% UV transmittance of the SA film at 280 nm. It can be seen that SA films containing 20% TA have excellent barrier and mechanical properties, and the development of such films will be applied to the storage and packaging of fresh food. It is worth noting that this work also investigated the effect of SA coatings containing different concentrations of TA on the preservation of passion fruits for 7 days. The results revealed that passion fruits treated with SA coatings containing a 30% TA concentration maintained a better appearance on the 7th day and had the lowest weight loss and crumpling indices of approximately 8.98% and 2.17, respectively, compared to the other treatment groups. Therefore, based on the overall results, the addition of 30% TA to SA coatings proved to be more effective and can be considered a promising approach for delaying fruit senescence and decay.

Stearic Acid and CeO2 Nanoparticles Co-functionalized Cotton Fabric with Enhanced UV-Block, Self-Cleaning, Water-Repellent, and Antibacterial Properties

Superhydrophobic cotton fabrics with multifunctional features are highly desired in domestic and outdoor applications. However, the short coating longevity and hazardous reagents significantly reduce their commercial-scale applications. Herein, we introduce CeO2 nanoparticles and stearic acid (SA) to develop a fluorine-free, durable superhydrophobic cotton fabric that mimics the lotus effect. The pristine cotton fabric is treated with APTES-functionalized CeO2 nanoparticles by immersion followed by a dip and drying treatment with a 2% myristic acid solution. This sequential process creates a stable superhydrophobic cotton fabric (SA/CeO2-cotton fabric) with a water contact angle of 158° and a water sliding angle of 5°. The results are attributed to the combined effect of CeO2 nanoparticles and stearic acid that enhances surface roughness and reduces surface sorption energy. APTES facilitates the durable attachment of CeO2 nanoparticles and stearic acid to the cotton fabric. The modified cotton fabric is characterized by advanced analytical tools, demonstrating enhanced superhydrophobicity, self-cleaning, and antiwater absorption properties. Additionally, it exhibits remarkable UV-blocking (UPF 542) and antibacterial properties. The designed superhydrophobic cotton fabric unveils good mechanical, thermal, and chemical durability. The proposed strategy is simple, green, and economical and can be used commercially for functional fabric preparation.

Tannic acid-functionalized 3D porous nanofiber sponge for antibiotic-free wound healing with enhanced hemostasis, antibacterial, and antioxidant properties

Developing an antibiotic-free wound dressing with effective hemostasis and antibacterial and antioxidant capacity is highly desirable. In this work, a three-dimensional (3D) chitosan/polyvinyl alcohol-tannic acid porous nanofiber sponge (3D-TA) was prepared via electrospinning. Compared with two-dimensional (2D) fiber membrane, the unique fluffy 3D-TA nanofiber sponge had high porosity, water absorption and retention ability, hemostatic capacity. Furthermore, the 3D sponge functionalized by tannic acid (TA) endow the sponge with high antibacterial and antioxidant capacity without loading antibiotics. In addition, 3D-TA composite sponges have shown highly biocompatibility against L929 cells. The in vivo experiment shows the 3D-TA is enable to accelerate wound healing. This newly 3D-TA sponges hold great potential as wound dressings for future clinical application.

Stability Studies, Biodegradation Tests, and Mechanical Properties of Sodium Alginate and Gellan Gum Beads Containing Surfactant

The excessive presence of single-use plastics is rapidly degrading our natural environment on a global scale due to their inherent resistance to decomposition. Wet wipes used for personal or household purposes contribute significantly to the accumulation of plastic waste. One potential solution to address this problem involves developing eco-friendly materials that possess the ability to degrade naturally while retaining their washing capabilities. For this purpose, the beads from sodium alginate, gellan gum, and a mixture of these natural polymers containing surfactant were produced using the ionotropic gelation method. Stability studies of the beads by observing their appearance and diameter were performed after incubation in solutions of different pH values. The images showed that macroparticles were reduced in size in an acidic medium and swelled in solution of pH-neutral phosphate-buffered saline. Moreover, all the beads first swelled and then degraded in alkaline conditions. The beads based on gellan gum and combining both polymers were the least sensitive to pH changes. The compression tests revealed that the stiffness of all macroparticles decreased with the increasing pH of the solutions in which they were immersed. The studied beads were more rigid in an acidic solution than in alkaline conditions. The biodegradation of macroparticles was assessed using a respirometric method in soil and seawater. It is important to note that the macroparticles degraded more rapidly in soil than in seawater.

Green synthesis of nano silver-embedded carboxymethyl starch waste/poly vinyl alcohol hydrogel with photothermal sterilization and pH-responsive behavior

Bacterial wound infections remain a significant health issue of great concern. Hence, there is a need to develop a novel material with antibacterial properties and smart functions. In this study, the effects of silver nanoparticles content (AgNPs) on properties of photothermal and pH-responsive nanocomposite hydrogels were investigated. The nanocomposite hydrogel samples were prepared using cassava starch waste modified by carboxymethylation (CMS), and mixed with poly vinly alcohol (PVA) and tannic acid (TA). The presence of AgNPs in the hydrogel samples enhanced antibacterial activities and photothermal conversion ability. The use of as-prepared hydrogel using 200 mM silver nitrate (H-AgNPs-200) combined with near infrared (NIR) radiation produced 100 % antibacterial efficiency for Escherichia coli (E.coli) and 98.2 % for Staphylococcus aureus (S.aureus). Furthermore, the H-AgNPs-200 also provided the highest storage modulus at 87.9 kPa. The obtained nanocomposite hydrogel was shown to exhibit pH-responsive release of TA. Under NIR radiation, higher release of TA at different pH was observed. The cytotoxicity study indicated that the nanocomposite hydrogels had good biocompatibility. Hence, the development of nanocomposite hydrogel-based CMS from cassava starch waste/PVA/AgNPs is a promising and sustainable approach where agro-waste product is used as the base material for medical application in wound dressing.

Diversity of Bioinspired Hydrogels: From Structure to Applications

Hydrogels are three-dimensional networks with a variety of structures and functions that have a remarkable ability to absorb huge amounts of water or biological fluids. They can incorporate active compounds and release them in a controlled manner. Hydrogels can also be designed to be sensitive to external stimuli: temperature, pH, ionic strength, electrical or magnetic stimuli, specific molecules, etc. Alternative methods for the development of various hydrogels have been outlined in the literature over time. Some hydrogels are toxic and therefore are avoided when obtaining biomaterials, pharmaceuticals, or therapeutic products. Nature is a permanent source of inspiration for new structures and new functionalities of more and more competitive materials. Natural compounds present a series of physico-chemical and biological characteristics suitable for biomaterials, such as biocompatibility, antimicrobial properties, biodegradability, and nontoxicity. Thus, they can generate microenvironments comparable to the intracellular or extracellular matrices in the human body. This paper discusses the main advantages of the presence of biomolecules (polysaccharides, proteins, and polypeptides) in hydrogels. Structural aspects induced by natural compounds and their specific properties are emphasized. The most suitable applications will be highlighted, including drug delivery, self-healing materials for regenerative medicine, cell culture, wound dressings, 3D bioprinting, foods, etc.

Tannic Acid Crosslinked Self-Healing and Reprocessable Silicone Elastomers with Improved Antibacterial and Flame Retardant Properties

Silicone elastomers are widely used in aviation, electronics, automotive, and medical device fields, and their overuse inevitably causes recycled problems. In addition, the elastomers are subject to attack by bacteria and fire during use in some application scenarios, which is a safety hazard. Therefore, there is a great need to prepare silicone elastomers with improved antibacterial, flame retardant, self-healing, and recyclable functions. A new strategy is proposed to prepare silicone elastomers with bio-based tannic acid as cross-linkers to solve this problem by using polydimethylsiloxane as a soft chain segment and 2,2-bis(hydroxymethyl)propionic acid as an intermediate chain extender. Based on the phenol carbamate bonding and hydrogen bonding interactions, the elastomer has efficient self-healing ability and can achieve dynamic dissociation at 120 °C for complete recovery. In addition, due to the unique spatial structure and polyphenolic hydroxyl groups of tannic acid, the mechanical properties of the elastomer are greatly improved with an antimicrobial efficiency of over 90% and a final oxygen index of 25.5%. The multifunctional silicone elastomer has great potential applications in recyclable refractory materials and antimicrobial materials.

Poly(Glycerol) Microparticles as Drug Delivery Vehicle for Biomedical Use

Glycerol (Gly) is a well-known, FDA-approved molecule posing three hydroxyl groups. Since Gly is biocompatible, here, it was aimed to prepare poly(Glycerol) (p(Gly)) particles directly for the first time for the delivery of therapeutic agents. Micrometer-sized particles of p(Gly) were successfully synthesized via the micro-emulsion method with an average size of 14.5 ± 5.6 µm. P(Gly) microparticles up to 1.0 g/mL concentrations were found biocompatible with 85 ± 1% cell viability against L929 fibroblasts. Moreover, p(Gly) microparticles were tested for hemocompatibility, and it was found that up to 1.0 mg/mL concentrations the particles were non-hemolytic with 0.4 ± 0.1% hemolysis ratios. In addition, the blood compatibility index values of the prepared p(Gly) particles were found as 95 ± 2%, indicating that these microparticles are both bio- and hemocompatible. Furthermore, Quercetin (QC) flavonoid, which possessed high antioxidant properties, was loaded into p(Gly) microparticles to demonstrate drug-carrying properties of the particles with improved bioavailability, non-toxicity, and high biocompatibility. The results of this study evidently revealed that p(Gly) particles can be directly prepared from a cost-effective and easily accessible glycerol molecule and the prepared particles exhibited good biocompatibility, hemocompatibility, and non-toxicity. Therefore, p(Gly) particles were found as promising vehicles for drug delivery systems in terms of their higher loading and release capability as well as for sustained long term release profiles.

Preparation and Characterization of Alginate Hydrogel Fibers Reinforced by Cotton for Biomedical Applications

In this study, cotton-reinforced alginate hydrogel fibers were successfully synthesized using the wet spinning technique to improve hydrogel fibers' mechanical strength and durability. Structural, chemical, and mechanical properties of the prepared fibers were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray Diffraction, differential scanning calorimeter, and single fiber strength tester. Based on the results obtained from fourier transform infrared spectroscopy and x-ray Diffraction, cotton fibers have been successfully incorporated into the structure of the hydrogel fibers. It was seen from the differential scanning calorimeter results that the incorporation of fibers in the structure even enhanced the thermal stability of the fiber and is viable to be implanted in the human body. Cotton reinforcement in alginate hydrogel fibers increases the modulus up to 56.45 MPa providing significant stiffness and toughness for the hydrogel composite fiber. The tenacity of the fibers increased by increasing the concentration of alginate from 2.1 cN/Tex (1% w/v) to 8.16 cN/Tex (1.5% w/v). Fiber strength increased by 26.75% and water absorbance increased by 120% by incorporating (10% w/w) cotton fibers into the fibrous structure. It was concluded that these cotton-reinforced alginate hydrogel fibers have improved mechanical properties and liquid absorption properties suitable for use in various biomedical applications.

Bioactive Edible Sodium Alginate Films Incorporated with Tannic Acid as Antimicrobial and Antioxidative Food Packaging

Currently, biodegradable and functional food packaging materials have attracted more and more attention due to their potential advantages. Biopolymers are one of the promising materials used to produce biodegradable food packaging films, and sodium alginate (SA) is one of the most used polysaccharides. In this work, we explored a novel edible sodium alginate (SA)/tannic acid (TA) film as biodegradable active food packaging material. The impact of TA concentration on the UV light blocking ability, transparency, water vapor barrier ability, mechanical strength, antioxidant, and antimicrobial activity of the SA-TA films was comprehensively investigated. Fourier transform infrared spectroscopy results revealed that strong hydrogen bonding was the main intermolecular interaction between SA and TA. As TA concentration in the films increased, the water vapor permeability (WVP) decreased from 1.24 × 10^-6 to 0.54 × 10^-6 g/m/h/Pa, the DPPH radical scavenging activity increased from 0.008% to 89.02%. Moreover, the incorporation of TA effectively blocked UV light and elevated antimicrobial activity against Escherichia coli. Overall, the SA films with TA exhibited better water vapor barrier ability, remarkable UV-light barrier ability and antioxidant activity while showing a slight decrease in light transmittance. These results indicated the potential application of TA as a functional additive agent for developing multifunctional food packaging materials.