Development and evaluation of fast forming nano-composite hydrogel for ocular delivery of diclofenac

Nanoparticle-hydrogel composite as dual-drug delivery system for the potential application of corneal graft rejection

Immune rejection remains the major cause of corneal graft failure. Immunosuppressants (such as rapamycin; RAPA) adjunctive to antibiotics (such as levofloxacin hydrochloride; Lev) are a clinical mainstay after corneal grafts but suffer from poor ocular bioavailability associated with severe side effects. In this study, we fabricated a Lev@RAPA micelle loaded cationic peptide-based hydrogel (NapFFKK) as a dual-drug delivery system by integrating RAPA micelles with Lev into a cationic NapFFKK hydrogel to potentially reduced the risk of corneal graft rejection. The properties of the resulting hydrogels were characterized using transmission electronmicroscopy and rheometer. Lev@RAPA micelles loaded NapFFKK hydrogel provided sustained in vitro drug release without compromising their inherent pharmacological activities. Topical instillation of Lev@RAPA micelles loaded NapFFKK hydrogel resulted in the great ocular tolerance and extended precorneal retention over 60 min, thus significantly enhancing the ocular bioavailability of both Lev and RAPA. Overall, such dual-drug delivery system might be a promising formulation for the suppression of corneal graft failure.

In Situ Rapid-Formation Sprayable Hydrogels for Challenging Tissue Injury Management

Rapid-acting, convenient, and broadly applicable medical materials are in high demand for the treatment of extensive and intricate tissue injuries in extremely medical scarcity environment, such as battlefields, wilderness, and traffic accidents. Conventional biomaterials fail to meet all the high criteria simultaneously for emergency management. Here, a multifunctional hydrogel system capable of rapid gelation and in situ spraying, addressing clinical challenges related to hemostasis, barrier establishment, support, and subsequent therapeutic treatment of irregular, complex, and urgent injured tissues, is designed. This hydrogel can be fast formed in less than 0.5 s under ultraviolet initiation. The precursor maintains an impressively low viscosity of 0.018 Pa s, while the hydrogel demonstrates a storage modulus of 0.65 MPa, achieving the delicate balance between sprayable fluidity and the mechanical strength requirements in practice, allowing flexible customization of the hydrogel system for differentiated handling and treatment of various tissues. Notably, the interactions between the component of this hydrogel and the cell surface protein confer upon its inherently bioactive functionalities such as osteogenesis, anti-inflammation, and angiogenesis. This research endeavors to provide new insights and designs into emergency management and complex tissue injuries treatment.

Imatinib@glycymicelles entrapped in hydrogel: preparation, characterization, and therapeutic effect on corneal alkali burn in mice

Imatinib (IMB) is a type of tyrosine kinase inhibitor with great application potential for inhibiting corneal neovascularization (CNV), but its poor water solubility limits its application in eye disease treatment. In this study, novel IMB@glycymicelles entrapped in hydrogel (called IMB@glycymicelle-hydrogel) were prepared, characterized, and evaluated for their therapeutic effects on corneal alkali burn in mice. Imatinib could be successfully loaded in glycymicelles using glycyrrhizin as a nanocarrier with an optimized weight ratio of IMB:nanocarrier. The apparent solubility of IMB was significantly improved from 61.69 ± 5.55 μg/mL to bare IMB to 359,967.62 ± 20,059.42 μg/mL to IMB@glycymicelles. Then, the IMB@glycymicelles were entrapped in hydrogel fabricated with hydroxypropyl methylcellulose and sodium hyaluronate (HA) to prolong retention time on the ocular surface. Rabbit eye tolerance tests showed that IMB@glycymicelle-hydrogel possessed good ocular safety profiles. In a mouse model of corneal alkali burns, the topical administration of IMB@glycymicelle-hydrogel showed strong efficacy by prompting corneal wound healing, recovering corneal sensitivity, relieving corneal opacities, and inhibiting CNV, and these efficacy evaluation parameters were better than those of the positive drug HA. Overall, these results demonstrated that IMB@glycymicelle-hydrogel may be a promising candidate for the effective treatment of alkali ocular damage.

A tissue-adhesive F127 hydrogel delivers antioxidative copper-selenide nanoparticles for the treatment of dry eye disease

Dry eye disease (DED) is currently the most prevalent condition seen in ophthalmology outpatient clinics, representing a significant public health issue. The onset and progression of DED are closely associated with oxidative stress-induced inflammation and damage. To address this, an aldehyde-functionalized F127 (AF127) hydrogel eye drop delivering multifunctional antioxidant Cu2-xSe nanoparticles (Cu2-xSe NPs) was designed. The research findings revealed that the Cu2-xSe nanoparticles exhibit unexpected capabilities in acting as superoxide dismutase and glutathione peroxidase. Additionally, Cu2-xSe NPs possess remarkable efficacy in scavenging reactive oxygen species (ROS) and mitigating oxidative damage. Cu2-xSe NPs displayed promising therapeutic effects in a mouse model of dry eye. Detailed investigation revealed that the nanoparticles exert antioxidant, anti-apoptotic, and inflammation-mitigating effects by modulating the NRF2 and p38 MAPK signalling pathways. The AF127 hydrogel eye drops exhibit good adherence to the ocular surface through the formation of Schiff-base bonds. These findings suggest that incorporating antioxidant Cu2-xSe nanoparticles into a tissue-adhesive hydrogel could present a highly effective therapeutic strategy for treating dry eye disease and other disorders associated with reactive oxygen species. STATEMENT OF SIGNIFICANCE: A new formulation for therapeutic eye drops to be used in the treatment of dry eye disease (DED) was developed. The formulation combines copper-selenium nanoparticles (Cu2-xSe NPs) with aldehyde-functionalized Pluronic F127 (AF127). This is the first study to directly examine the effects of Cu2-xSe NPs in ophthalmology. The NPs exhibited antioxidant capabilities and enzyme-like properties. They effectively eliminated reactive oxygen species (ROS) and inhibited apoptosis through the NRF2 and p38 MAPK signalling pathways. Additionally, the AF127 hydrogel enhanced tissue adhesion by forming Schiff-base links. In mouse model of DED, the Cu2-xSe NPs@AF127 eye drops demonstrated remarkable efficacy in alleviating symptoms of DED. These findings indicate the potential of Cu2-xSe NPs as a readily available and user-friendly medication for the management of DED.

Dissolvable hybrid microneedle patch for efficient delivery of curcumin to reduce intraocular inflammation

Intraocular inflammation seriously impairs vision, and the effectiveness of intraocular drug delivery is hampered by various physiological barriers, such as the corneal barrier. In this paper, we present a simple approach to fabricating a dissolvable hybrid microneedles (MNs) patch for the efficient delivery of curcumin to treat intraocular inflammatory disorders. Water-insoluble curcumin was first encapsulated into polymeric micelles with high anti-inflammatory capacities, and then were combined with hyaluronic acid (HA) to create a dissolvable hybrid MNs patch using a simple micromolding method. Curcumin was amorphously dispersed within the MNs patch as indicated by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) analyses. According to an in vitro drug release study, the proposed MNs patch provided sustainable drug release over 8 h. Following its in vivo topical application, the MNs patch demonstrated an extended pre-corneal retention time over 3.5 h and exhibited great ocular biocompatibility. Additionally, such MNs patch could reversibly penetrate the corneal epithelium, generating an array of microchannels on the corneal surface, thereby increasing ocular bioavailability. Of greater significance, the use of MNs patch demonstrated the improved therapeutic effectiveness in treating endotoxin-induced uveitis (EIU) in a rabbit model compared to curcumin eye drops via a significant reduction in the infiltration of inflammatory cells such as CD45+ leukocytes and CD68+ macrophages. Overall, the topical application of the MNs patch as an efficient ocular drug delivery system could potentially serve as a promising approach for treating different types of intraocular disorders.

Long-acting formulation strategies for protein and peptide delivery in the treatment of PSED

The invigoration of protein and peptides in serious eye disease includes age-related macular degeneration, choroidal neovascularization, retinal neovascularization, and diabetic retinopathy. The transportation of macromolecules like aptamers, recombinant proteins, and monoclonal antibodies to the posterior segment of the eye is challenging due to their high molecular weight, rapid degradation, and low solubility. Moreover, it requires frequent administration for prolonged therapy. The long-acting novel formulation strategies are helpful to overcome these issues and provide superior therapy. It avoids frequent administration, improves stability, high retention time, and avoids burst release. This review briefly enlightens posterior segments of eye diseases with their diagnosis techniques and treatments. This article mainly focuses on recent advanced approaches like intravitreal implants and injectables, electrospun injectables, 3D printed drug-loaded implants, nanostructure thin-film polymer devices encapsulated cell technology-based intravitreal implants, injectable and depots, microneedles, PDS with ranibizumab, polymer nanoparticles, inorganic nanoparticles, hydrogels and microparticles for delivering macromolecules in the eye for intended therapy. Furthermore, novel techniques like aptamer, small Interference RNA, and stem cell therapy were also discussed. It is predicted that these systems will make revolutionary changes in treating posterior segment eye diseases in future.

Effectiveness of an ocular adhesive polyhedral oligomeric silsesquioxane hybrid thermo-responsive FK506 hydrogel in a murine model of dry eye

Dry eye is a common ocular disease that results in discomfort and impaired vision, impacting an individual's quality of life. A great number of drugs administered in eye drops to treat dry eye are poorly soluble in water and are rapidly eliminated from the ocular surface, which limits their therapeutic effects. Therefore, it is imperative to design a novel drug delivery system that not only improves the water solubility of the drug but also prolongs its retention time on the ocular surface. Herein, we develop a copolymer from mono-functional POSS, PEG, and PPG (MPOSS-PEG-PPG, MPEP) that exhibits temperature-sensitive sol-gel transition behavior. This thermo-responsive hydrogel improves the water solubility of FK506 and simultaneously provides a mucoadhesive, long-acting ocular delivery system. In addition, the FK506-loaded POSS hydrogel possesses good biocompatibility and significantly improves adhesion to the ocular surface. In comparison with other FK506 formulations and the PEG-PPG-FK506 (F127-FK506) hydrogel, this novel MPOSS-PEG-PPG-FK506 (MPEP-FK506) hydrogel is a more effective treatment of dry eye in the murine dry eye model. Therefore, delivery of FK506 in this POSS hydrogel has the potential to prolong drug retention time on the ocular surface, which will improve its therapeutic efficacy in the management of dry eye.

Hydrogels as Emerging Materials for Cornea Wound Healing

Hydrogel biomaterials have many favorable characteristics including tuneable mechanical behavior, cytocompatibility, optical properties suitable for regeneration and restoration of the damaged cornea tissue. The cornea is a tissue susceptible to various injuries and traumas with a complicated healing cascade, in which conserving its transparency and integrity is critical. Accordingly, the hydrogels' known properties along with the stimulation of nerve and cell regeneration make them ideal scaffold for corneal tissue engineering. Hydrogels have been used extensively in clinical applications for the repair and replacement of diseased organs. The development and optimizing of novel hydrogels to repair/replace corneal injuries have been the main focus of researches within the last decade. This research aims to critically review in vitro, preclinical, as well as clinical trial studies related to corneal wound healing using hydrogels in the past 10 years, as this is considered as an emerging technology for corneal treatment. Several unique modifications of hydrogels with smart behaviors have undergone early phase clinical trials and showed promising outcomes. Financially, this considers a multibillion dollars industry and with huge interest from medical devices as well as pharmaceutical industries with several products may emerge within the next five years.

Peptide-based supramolecular hydrogels for local drug delivery

Peptide-based supramolecular hydrogels have shown great promise as drug delivery systems (DDSs) because of their excellent biocompatibility, biodegradability, biological function, synthetic feasibility, and responsiveness to external stimuli. Self-assembling peptide molecules are able rationally designed into specific nanoarchitectures in response to the different environmental factors under different circumstances. Among all stimuli that have been investigated, utilizing inherent biological microenvironment, such as metal ions, enzymes and endogenous redox species, to trigger self-assembly endows such systems spatiotemporal controllability to transport therapeutics more accurately. Materials formed by weak non-covalent interactions result in the shear-thinning and immediate recovery behavior. Thus, they are injectable via a syringe or catheter, making them the ideal vehicles to deliver drugs. Based on the above merits, self-assembling peptide-based DDSs have been applied to treat various diseases via direct administration at the lesion site. Herein, in this review, we outline the triggers for inducing peptide-based hydrogels formation and serving as DDSs. We also described the advancements of peptide-based supramolecular hydrogels for local drug delivery, including intratumoral, subcutaneous, ischemia-related tissue (intramyocardial, intrarenal, and ischemic hind limb), and ocular administration. Finally, we give a brief perspective about the prospects and challenges in this field.

Nanoparticle-Hydrogel Composite Drug Delivery System for Potential Ocular Applications

Intravitreal injections are clinically established procedures in the treatment of posterior eye diseases, such as wet age-related macular degeneration (wet AMD) which requires monthly intravitreal injections of anti-vascular endothelial growth factor (anti-VEGF) protein drugs that can lead to complications due to frequent dosing. In this study, we designed a composite drug delivery system (DDS) consisting of drug-loaded poly (lactide–co–glycolide) (PLGA) nanoparticles and a chemically crosslinked hyaluronan hydrogel to reduce the dosing frequency. The morphology, size, composition, and drug loading efficiency of the prepared nanoparticles were characterized. The properties of the modified hyaluronan polymers used were also examined. The degree of swelling/degradation and controlled release ability of the hyaluronan hydrogel and the composite DDS were identified using bovine serum albumin (BSA) as a model drug. The results show that this system can retain 75% of its wet weight without losing its integrity and release the model drug at the rate of 0.4 μg/day for more than two months under physiological conditions. In addition, the nanoparticulate formulation of the system can further improve bioavailability of the drugs by penetrating deep into the retinal layers. In conclusion, the proposed composite DDS is easily prepared with biocompatible materials and is promising for providing the sustained release of the protein drugs as a better treatment for ocular neovascular diseases like wet AMD.

Hydrogel Biomaterials for Application in Ocular Drug Delivery

There are many challenges involved in ocular drug delivery. These are a result of the many tissue barriers and defense mechanisms that are present with the eye; such as the cornea, conjunctiva, the blinking reflex, and nasolacrimal drainage system. This leads to many of the conventional ophthalmic preparations, such as eye drops, having low bioavailability profiles, rapid removal from the administration site, and thus ineffective delivery of drugs. Hydrogels have been investigated as a delivery system which is able to overcome some of these challenges. These have been formulated as standalone systems or with the incorporation of other technologies such as nanoparticles. Hydrogels are able to be formulated in such a way that they are able to change from a liquid to gel as a response to a stimulus; known as "smart" or stimuli-responsive biotechnology platforms. Various different stimuli-responsive hydrogel systems are discussed in this article. Hydrogel drug delivery systems are able to be formulated from both synthetic and natural polymers, known as biopolymers. This review focuses on the formulations which incorporate biopolymers. These polymers have a number of benefits such as the fact that they are biodegradable, biocompatible, and non-cytotoxic. The biocompatibility of the polymers is essential for ocular drug delivery systems because the eye is an extremely sensitive organ which is known as an immune privileged site.

Impact of Nanoclay on the pH-Responsiveness and Biodegradable Behavior of Biopolymer-Based Nanocomposite Hydrogels

This research work deployed free radical polymerization for the development of pH-responsive hybrid nanocomposite hydrogels (NCHs) with the formation of improved interpenetrating networks (IPN). The crosslinked biopolymeric system was composed of (chitosan (CH)/guar gum (GG)/polyol) and a nanofiller (Cloisite 30B). The study was aimed to investigate the role of Cloisite 30B as a nanofiller and linseed oil-derived polyol to induce stable interpenetrating networks in chitosan‒guar gum-based hydrogels. FT-IR analysis confirmed the formation of crosslinked networks with the formation of hydrogen bonds in the synthesized NCHs. Thermogravimetric analysis and differential scanning calorimetry revealed high thermal stability of the NCHs. The hydrolytic and soil burial degradation tests confirmed the biodegradability of the synthesized NCHs. An extraordinarily high swelling capacity in a buffer solution of pH 4.0 and 7.4 demonstrated their pH-responsive behavior. It has been demonstrated that even the minimal addition of polyol to the guar gum-based hydrogels has influenced the stability and characteristic features such as high swelling capacity owing to the formation of interpenetrating networks and the biodegradability of the hydrogels.

Natural Polymer-Based Hydrogels with Enhanced Mechanical Performances: Preparation, Structure, and Property

Hydrogels based on natural polymers have bright application prospects in biomedical fields due to their outstanding biocompatibility and biodegradability. However, the poor mechanical performances of pure natural polymer-based hydrogels greatly limit their application prospects. Recently, a variety of strategies has been applied to prepare natural polymer-based hydrogels with enhanced mechanical properties, which generally exhibit stiffening, strengthening, and stretchable behaviors. This article summarizes the recent progress of natural polymer-based hydrogels with enhanced mechanical properties. From a structure point of view, four kinds of hydrogel are reviewed; double network hydrogels, nanocomposite hydrogels, click chemistry-based hydrogels, and supramolecular hydrogels. For each typical hydrogel, its preparation, structure, and mechanical performance are introduced in detail. At the end of this article, the current challenges and future prospects of hydrogels based on natural polymers are discussed and it is pointed out that 3D printing may offer a new platform for the development of natural polymer-based hydrogels.

Updates on thermosensitive hydrogel for nasal, ocular and cutaneous delivery

Thermosensitive hydrogels are in situ gelling systems composed of hydrophilic homopolymers or block copolymers which remain as solutions at room temperature and form gels after administration into the body. Its application in advanced drug delivery has gained significant attention in recent years. The tunable characteristics of thermosensitive hydrogels make them versatile and capable of incorporating both hydrophilic and lipophilic compounds and macromolecules. The drug molecules can be included as free molecules or preformulated into nano- or micro-particles or liposomes. Although there were several reviews on the materials of thermosensitive hydrogels, the compatibility between the drug and thermosensitive material as well as its in vitro release mechanisms and in vivo performance have barely been investigated. The current review is proposed aiming to not only provide an update on the recent development in thermosensitive hydrogel formulations for nasal, ocular and cutaneous deliveries, but also identify the relationship between the drug characteristics and the loading strategies, and their impacts on the release mechanisms and the in vivo performance. Our current update for the first time highlights the essential features for successful development of in situ thermosensitive hydrogels to facilitate nasal, ocular or cutaneous drug deliveries.

Noninvasive biodegradable nanoparticles-in-nanofibers single-dose ocular insert: in vitro, ex vivo and in vivo evaluation

Aim: This study involves, for the first time, the development of mucoadhesive biodegradable polymeric-multilayered nanoparticles-in-nanofibers (NPs-in-NFs) matrix as an innovative single-dose noninvasive ocular-insert that could substitute conventional ocular dosage-forms. Materials & methods: Azithromycin-loaded poly(lactic-co-glycolic acid) copolymer/pluronic NPs were developed then incorporated into electrospun polyvinylpyrrolidone NFs, and tested for their efficient treatment of ocular bacterial infection. Results: Release and permeation studies proved the ability of the insert to control drug release over 10 days. Conclusion: The incorporation of NPs into NFs achieved several other benefits like increasing ocular residence and contact time with conjunctival tissue, accurate dose delivery, sustaining drug release with constant rate, reducing frequency of administration, improving bioavailability along with decreasing incidence of visual and systemic side effects.

Nanostructured lipid carriers-based thermosensitive eye drops for enhanced, sustained delivery of dexamethasone

AIM

Nanostructured lipid carriers in-gel (NLCs-gel) were prepared to enhance and improve the ocular delivery of dexamethasone. Materials & methods: NLCs containing dexamethasone prepared by high-pressure homogenization were characterized and dispersed into thermosensitive gels (Pluronic F127 and F68 as gels material). In vitro drug release studies, ocular irritation tests, ex vivo corneal penetration and drug dynamics of NLCs and NLCs-gel were evaluated in aqueous humor.

RESULTS

NLCs-gel exhibited a rapid sol-gel transition at 34.4°C and presented nano-sized, narrowly distributed particles. Corneal penetration studies revealed steady sustained drug release (Ritger-Peppas); NLCs-gel increased ocular bioavailability by prolonging precorneal retention time and improving corneal permeation.

CONCLUSION

These findings suggest developing NLCs-gel for potential treatment of posterior segment eye diseases.

Multivesicular liposomes for sustained release of bevacizumab in treating laser-induced choroidal neovascularization

Bevacizumab is an anti-vascular endothelial growth factor drug that can be used to treat choroidal neovascularization (CNV). Bevacizumab-loaded multivesicular liposomes (Bev-MVLs) have been designed and developed to increase the intravitreal retention time of bevacizumab and reduce the number of injection times. In this study, Bev-MVLs with high encapsulation efficiency were prepared by double emulsification technique, and antibody activity was determined. The results revealed that 10% of human serum albumin (HSA) could preserve the activity of bevacizumab. In vitro release of Bev-MVLs appeared to be in a more sustained manner, the underlying mechanisms of Bev-MVLs indicated that bevacizumab was released from MVLs through diffusion and erosion. Results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) demonstrated that bevacizumab could retain its structural integrity after being released from MVLs in vitro. In vivo imaging was used to evaluate the retention time of antibody in rat eyes, while pharmacokinetic analysis was performed on rabbit eyes. These results indicated that Bev-MVLs exhibited sustained release effects as compared to bevacizumab solution (Bev-S). Bev-MVLs could effectively inhibit the thickness of CNV lesion as compared to Bev-S at 28 days after treatment. Furthermore, these data suggest that Bev-MVLs are biologically feasible to increase the retention time of bevacizumab in vitreous humor. This novel Bev-MVLs may therefore serve as a promising sustained release drug delivery system for the treatment of CNV.

Release kinetics of somatostatin from self-assembled nanostructured hydrogels

Somatostatin-14 is a native neuropeptide with widespread functions in the body. Self-assembly of somatostatin-14 into amyloid-like nanofibrils has been previously demonstrated in aqueous media. We here hypothesize that the somatostatin nanofibrils can form a stable depot that release monomers in a controlled manner. This study aims to investigate if somatostatin monomers are released from physical hydrogels formed in water and in the presence of electrolytes. The release kinetics of the somatostatin monomers is investigated for the first time. This is correlated with the rheological properties of the hydrogels formed. We demonstrate that at the concentrations tested, there is release of somatostatin monomers from the hydrogels following a novel hybrid model of zero-order and first-order release. In the presence of electrolytes, somatostatin hydrogels demonstrated higher elastic moduli (G') which correlates to the narrower and higher density of nanofibrils observed with TEM. The presence of electrolytes resulted in a slower release of the somatostatin monomers and in a lower cumulative percentage released over 48 hrs. It is questionable that the concentrations released will be therapeutically effective. However, self-assembled somatostatin hydrogels have the potential to act as a depot for ocular drug delivery.

Nanogels of methylcellulose hydrophobized with N-tert-butylacrylamide for ocular drug delivery

While eye drops account for the majority of ophthalmic formulation for drug delivery, their efficiency is limited by rapid pre-corneal loss. In this study, we investigate nanogel suspensions in order to improve the topical ocular therapy by reducing dosage and frequency of administration. We synthesized self-assembling nanogels of 140 nm by grafting side chains of poly(N-tert-butylacrylamide) (PNtBAm) on methylcellulose via cerium ammonium nitrate. Successful grafting of PNtBAm onto methylcellulose (MC) was confirmed by both NMR and ATR. Synthesized molecules (MC-g-PNtBAm) self-assembled in water driven by hydrophobic interaction of the grafted side chains creating colloid solutions. Materials were synthesized by changing feed ratios of acid, initiator and monomer in order to control the degree of hydrophobic modification. The nanogels were tested for different degrees of grafting. Viability studies performed with HCE cells testified to the biocompatibility of poly(N-tert-butylacrylamide) grafted methylcellulose nanogels. Dexamethasone was entrapped with an efficiency superior to 95 % and its release presented minimal burst phase. Diffusion of drug from the nanogels was found to be delayed by increasing the degree of grafting. The release profile of the entrapped compound from the MC-g-PNtBAm nanogels can thus be tuned by simply adjusting the degree of hydrophobic modification. MC-g-PNtBAm nanogels present promising properties for ocular drug delivery.

Diclofenac sodium ion exchange resin complex loaded melt cast films for sustained release ocular delivery

Purpose: The goal of the present study is to develop polymeric matrix films loaded with a combination of free diclofenac sodium (DFS_free) and DFS:Ion exchange resin complexes (DFS:IR) for immediate and sustained release profiles, respectively.

Methods: Effect of ratio of DFS and IR on the DFS:IR complexation efficiency was studied using batch processing. DFS:IR complex, DFS_free, or a combination of DFS_free+DFS:IR loaded matrix films were prepared by melt-cast technology. DFS content was 20% w/w in these matrix films. In vitro transcorneal permeability from the film formulations were compared against DFS solution, using a side-by-side diffusion apparatus, over a 6 h period. Ocular disposition of DFS from the solution, films and corresponding suspensions were evaluated in conscious New Zealand albino rabbits, 4 h and 8 h post-topical administration. All in vivo studies were carried out as per the University of Mississippi IACUC approved protocol.

Results: Complexation efficiency of DFS:IR was found to be 99% with a 1:1 ratio of DFS:IR. DFS release from DFS:IR suspension and the film were best-fit to a Higuchi model. In vitro transcorneal flux with the DFS_free+DFS:IR_(1:1)(1 + 1) was twice that of only DFS:IR_(1:1) film. In vivo, DFS solution and DFS:IR_(1:1) suspension formulations were not able to maintain therapeutic DFS levels in the aqueous humor (AH). Both DFS_free and DFS_free+DFS:IR_(1:1)(3 + 1) loaded matrix films were able to achieve and maintain high DFS concentrations in the AH, but elimination of DFS from the ocular tissues was much faster with the DFS_free formulation.

Conclusion: DFS_free+DFS:IR combination loaded matrix films were able to deliver and maintain therapeutic DFS concentrations in the anterior ocular chamber for up to 8 h. Thus, free drug/IR complex loaded matrix films could be a potential topical ocular delivery platform for achieving immediate and sustained release characteristics.

Targeted delivery of hyaluronic acid to the ocular surface by a polymer-peptide conjugate system for dry eye disease

Hyaluronic acid (HA) solutions effectively lubricate the ocular surface and are used for the relief of dry eye related symptoms. However, HA undergoes rapid clearance due to limited adhesion, which necessitates frequent instillation. Conversely, highly viscous artificial tear formulations with HA blur vision and interfere with blinking. Here, we developed an HA-eye drop formulation that selectively binds and retains HA for extended periods of time on the ocular surface. We synthesized a heterobifunctional polymer-peptide system with one end binding HA while the other end binding either sialic acid-containing glycosylated transmembrane molecules on the ocular surface epithelium, or type I collagen molecule within the tissue matrix. HA solution was mixed with the polymer-peptide system and tested on both ex vivo and in vivo models to determine its ability to prolong HA retention. Furthermore, rabbit ocular surface tissues treated with binding peptides and HA solutions demonstrated superior lubrication with reduced kinetic friction coefficients compared to tissues treated with conventional HA solution. The results suggest that binding peptide-based solution can keep the ocular surface enriched with HA for prolonged times as well as keep it lubricated. Therefore, this system can be further developed into a more effective treatment for dry eye patients than a standard HA eye drop.

STATEMENT OF SIGNIFICANCE

Eye drop formulations containing HA are widely used to lubricate the ocular surface and relieve dry eye related symptoms, however its low residence time remains a challenge. We designed a polymer-peptide system for the targeted delivery of HA to the ocular surface using sialic acid or type I collagen as anchors for HA immobilization. The addition of the polymer-peptide system to HA eye drop exhibited a reduced friction coefficient, and it can keep the ocular surface enriched with HA for prolonged time. This system can be further developed into a more effective treatment for dry eye than a standard HA eye drop.

Eye irritation testing of nanomaterials using the EpiOcular™ eye irritation test and the bovine corneal opacity and permeability assay

BACKGROUND

Assessment of eye irritation hazard has long been a core requirement in any chemical legislation. Nevertheless, publications focussing on the eye damaging potential of nanomaterials are scarce. Traditionally, eye irritation testing was performed using rabbits. The OECD Test Guideline 437 Bovine Corneal Opacity and Permeability (BCOP) test method allows determining severely irritating substances without animals, and the recently adopted OECD Test Guideline 492 Reconstructed human cornea-like epithelium test method allows identifying chemicals that neither induce eye irritation nor serious eye damage. For substances applicable to these tests, huge progress has been made in replacing animal testing.

METHODS

The in vitro eye irritation potential of 20 nanosized and 3 non-nanosized materials was investigated in a 2-tier EpiOcular™ Eye Irritation Test (EpiOcular™-EIT) and BCOP testing strategy including histopathology of the bovine corneas. Furthermore, applicability of the testing strategy for nanomaterials was assessed. Test materials encompassed OECD representative nanomaterials (metals (Ag), metal oxides (ZnO, TiO2, CeO2), amorphous SiO2 and MWCNTs), three organic pigments, quartz, and talc.

RESULTS

None of the dry-powder nanomaterials elicited eye irritation in either the EpiOcular™-EIT or the BCOP assay. Likewise, an amorphous SiO2 nanomaterial that was supplied as suspension was tested negative in both assays. By contrast, in the EpiOcular™-EIT, the silver nanomaterial that was supplied as dispersion was tested positive, whereas its surfactant-containing dispersant was borderline to negative. In the BCOP assay, the silver nanomaterial elicited highly variable results and dark-brown patches remained on the corneal surface, whereas the results for its dispersant alone were borderline to positive, which was assessed as inconclusive due to high inter-assay variability.

CONCLUSION

The present study points to the low eye irritation potential of a spectrum of nanomaterials, which is consistent with available in vivo data for the same test materials or for nanosized or bulk materials of the same composition.

Self-Assembled Thermoresponsive Nanogels Prepared by Reverse Micelle → Positive Micelle Method for Ophthalmic Delivery of Muscone, a Poorly Water-Soluble Drug

This study aimed to design a nanocarrier ophthalmic delivery system of muscone, a poorly water-soluble drug. The muscone thermoresponsive nanogels were self-assembled by reverse micelle → positive micelle method. Muscone was demonstrated to have uniform narrow particle size distribution in nanogel by the dynamic light scattering test. The developed nanocomposite hydrogel had a high muscone loading, and the rheology results showed that the phase transition temperature was 34.05°C. Thixotropy test indicated that the nanogel was able to resist the blinking of eyes because of the thixotropy recovery time, which is <5 s. Compared with muscone eye drops, muscone nanogels showed longer retention time on the corneal surface using fluorescent labeling technology and produced a 3.4-fold increase in apparent permeability coefficients (Papp). Draize testing showed that the developed nanogel caused no eye irritation. In vivo pharmacokinetic study indicated that the nanogel could significantly increase the bioavailability of muscone after administration compared with eye drops. These results indicate that self-assembled thermoresponsive nanogel prepared by reverse micelle → positive micelle method has potential for the ophthalmic delivery of poorly water-soluble drugs.

Supramolecular hydrogel of non-steroidal anti-inflammatory drugs: preparation, characterization and ocular biocompatibility

A supramolecular hydrogel based on a peptide (GFFY) and non-steroidal anti-inflammatory drugs (naproxen and ibuprofen) was synthesized for use as a topical gel.

Self-assembled peptide-based supramolecular hydrogel for ophthalmic drug delivery

Conventional ophthalmic formulations such as eye drops normally suffer from limited therapeutic efficacy with a requirement for frequent instillation.

Preparation, characterization and biocompatibility studies of thermoresponsive eyedrops based on the combination of nanostructured lipid carriers (NLC) and the polymer Pluronic F-127 for controlled delivery of ibuprofen

CONTEXT

Nanostructured lipid carrier (NLC) dispersions present low viscosity and poor mucoadhesive properties, which reduce the pre-corneal residence time and consequently, the bioavailability of ocular drugs.

OBJECTIVE

The aim of this study was to prepare thermoresponsive eyedrops based on the combination of lipid nanoparticles and a thermoresponsive polymer with mucomimetic properties (Pluronic® F-127).

MATERIALS AND METHODS

NLC_i dispersions were prepared based on the melt-emulsification and ultrasonication technique. Physicochemical and morphological characteristics of the colloidal dispersions were evaluated. The formulation was also investigated for potential cytotoxicity in Y-79 human retinoblastoma cells and the in vitro drug release profile of the ibuprofen was determined.

RESULTS

NLC_i showed a Z-average below 200 nm, a highly positive zeta potential and an efficiency of encapsulation (EE) of ∼90%. The gelification of the NLC_i dispersion with 15% (w/w) Pluronic® F-127 did not cause significant changes to the physicochemical properties. The potential NLC-induced cytotoxicity was evaluated by the Alamar Blue reduction assay in Y-79 cells, and no relevant cytotoxicity was observed after exposure to 0-100 µg/mL NLC for up to 72 hours. The optimized formulations showed a sustained release of ibuprofen over several hours.

DISCUSSION AND CONCLUSION

The strategy proposed in this work can be successfully used to increase the bioavailability and the therapeutic efficacy of conventional eyedrops.

Chitosan grafted methoxy poly(ethylene glycol)-poly(ε-caprolactone) nanosuspension for ocular delivery of hydrophobic diclofenac

This study aimed to develop a cationic nanosuspension of chitosan (CS) and methoxy poly(ethylene glycol)-poly(ε-caprolactone) (MPEG-PCL) for ocular delivery of diclofenac (DIC). MPEG-PCL-CS block polymer was synthesized by covalent coupling of MPEG-PCL with CS. The critical micelle concentration of the MPEG-PCL-CS block polymer was 0.000692 g/L. DIC/MPEG-PCL-CS nanosuspension (mean particle size = 105 nm, zeta potential = 8 mV) was prepared and characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and differential scanning calorimetry. The nanosuspension was very stable without apparent physical property changes after storage at 4 °C or 25 °C for 20 days, but it was unstable in the aqueous humor solution after 24 h incubation. Sustained release of the encapsulated DIC from the nanosuspension occurred over 8 h. Neither a blank MPEG-PCL-CS nanosuspension nor a 0.1% (mass fraction) DIC/MPEG-PCL-CS nanosuspension caused ocular irritation after 24 h of instillation. Enhanced penetration and retention in corneal tissue was achieved with a Nile red/MPEG-PCL-CS nanosuspension compared with a Nile red aqueous solution. In vivo pharmacokinetics studies showed enhanced pre-corneal retention and penetration of the DIC/MPEG-PCL-CS nanosuspension, which resulted in a higher concentration of DIC (C_max) in the aqueous humor and better bioavailability compared with commercial DIC eye drops (P < 0.01).

An injectable thermosensitive polymeric hydrogel for sustained release of Avastin® to treat posterior segment disease

Delivery of drugs, especially bioactive macromolecules such as proteins and nucleic acids, to the posterior segment is still a significant challenge for pharmaceutical scientists. In the present study, we developed an injectable thermosensitive polymeric hydrogel for sustained release of Avastin(®) to treat posterior segment disorders. The payload of Avastin(®) to poly(lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) hydrogel did not influence its inherent sol-gel transition behavior, but shifted the sol-gel transition to a lower temperature. The resulting Avastin(®)/PLGA-PEG-PLGA hydrogels had a porous structure (pore size, 100 ∼ 150 μm) as determined by scanning electron microcopy (SEM), facilitating sustained Avastin(®) release over a period of up to 14 days in vitro. The PLGA-PEG-PLGA hydrogel was immediately formed in the vitreous humor after intravitreal injection, followed by slow clearance over an 8 week study period. The PLGA-PEG-PLGA hydrogel exhibited no apparent toxicity against retinal tissue, as indicated by the absence of inflammation, retinal necrosis, and stress responses, using optical coherence tomography (OCT) and histological/immunochemical analyses. Electrophysiology (ERG) examination also showed that the PLGA-PEG-PLGA hydrogel did not affect retinal function. In vivo pharmacokinetic studies indicated that the use of the PLGA-PEG-PLGA hydrogel greatly extended the release of Avastin(®) over time in the vitreous humor and retina after intravitreal injection. Together, these results demonstrated that the PLGA-PEG-PLGA hydrogel was a promising candidate for ocular drug delivery of Avastin(®)via intravitreal injection.

Prevention of posterior capsular opacification

Posterior capsular opacification (PCO) is a common complication of cataract surgery. The development of PCO is due to a combination of the processes of proliferation, migration, and transdifferentiation of residual lens epithelial cells (LECs) on the lens capsule. In the past decades, various forms of PCO prevention have been examined, including adjustments of techniques and intraocular lens materials, pharmacological treatments, and prevention by interfering with biological processes in LECs. The only method so far that seems effective is the implantation of an intraocular lens with sharp edged optics to mechanically prevent PCO formation. In this review, current knowledge of the prevention of PCO will be described. We illustrate the biological pathways underlying PCO formation and the various approaches to interfere with the biological processes to prevent PCO. In this type of prevention, the use of nanotechnological advances can play a role.

Polymer hydrogel functionalized with biodegradable nanoparticles as composite system for controlled drug delivery

The possibility to direct pharmacological treatments targeting specific cell lines using polymer nanoparticles is one of the main novelties and perspectives in nanomedicine. However, sometimes, the ability to maintain NPs localized at the site of the injection that work as a drug reservoir can represent a good and complementary option. In this direction we built a composite material made of polymeric hydrogel functionalized with polymer NPs. ϵ-caprolactone and polyethylene glycol have been copolymerized in a two-step synthesis of PEGylated NPs, while hydrogel was synthesized through polycondensation between NPs, agarose and branched polyacrylic acid. NP functionalization was verified with Fourier transform infrared spectroscopy (FTIR), high resolution magic angle spinning-nuclear magnetic resonance (HRMAS-NMR) spectroscopy and release kinetics from a hydrogel matrix and compared with NPs only physically entrapped into a hydrogel matrix. The characteristics of the resulting composite hydrogel-NPs system were studied both in terms of rheological properties and in its ability to sustain the release of To-Pro3, used as a drug mimetic compound to represent a promising drug delivery device.

A polymeric device for controlled transscleral multi-drug delivery to the posterior segment of the eye

The design of drug delivery systems that can deliver multiple drugs to the posterior segment of the eye is a challenging task in retinal disease treatments. We report a polymeric device for multi-drug transscleral delivery at independently controlled release rates. The device comprises a microfabricated reservoir, controlled-release cover and three different fluorescent formulations, which were made of photopolymeized tri(ethyleneglycol)dimethacrylate (TEGDM) and poly(ethyleneglycol)dimethacrylate (PEGDM). The release rate of each fluorescent is controlled by varying the PEGDM/TEGDM ratio in its formulation and the cover. The release kinetics appeared to be related to the swelling ratio of the PEGDM/TEGDM polymers. When the devices were implanted onto rat sclerae, fluorescence was observable in the ocular tissues during 4 weeks' implantation and distributed locally around the implantation site. Our polymeric system, which can administer multiple compounds with distinct kinetics, provides prolonged action and less invasive transscleral administration, and is expected to provide new tools for the treatment of posterior eye diseases with new therapeutic modalities.