Hyaluronidase enzyme core-5-fluorouracil-loaded chitosan-PEG-gelatin polymer nanocomposites as targeted and controlled drug delivery vehicles

Synthesis, characterization and stability of crosslinked chitosan-maltodextrin pH-sensitive nanogels

Polysaccharide-based nanogels offer a wide range of chemical compositions and are of great interest due to their biodegradability, biocompatibility, non-toxicity, and their ability to display pH, temperature, or enzymatic response. In this work, we synthesized monodisperse and tunable pH-sensitive nanogels by crosslinking, through reductive amination, chitosan and partially oxidized maltodextrins, by keeping the concentration of chitosan close to its overlap concentration, i.e. in the dilute and semi-dilute regime. The chitosan/maltodextrin nanogels presented sizes ranging from 63 ± 9 to 279 ± 16 nm, showed quasi-spherical and cauliflower-like morphology, reached a ζ-potential of +36 ± 2 mV and maintained a colloidal stability for up to 7 weeks. It was found that the size and surface charge of nanogels depended both on the oxidation degree of maltodextrins and chitosan concentration, as well as on its degree of acetylation and protonation, the latter tuned by pH. The pH-responsiveness of the nanogels was evidenced by an increased size, owed to swelling, and ζ-potential when pH was lowered. Finally, maltodextrin-chitosan biocompatible nanogels were assessed by cell viability assay performed using the HEK293T cell line.

Synthesis and Evaluation of Gelatin-Chitosan Biofilms Incorporating Zinc Oxide Nanoparticles and 5-Fluorouracil for Cancer Treatment

In this study, a novel multifunctional biofilm was fabricated using a straightforward casting process. The biofilm comprised gelatin, chitosan, 5-fluorouracil (5-FU)-conjugated zinc oxide nanoparticles, and polyvinyl alcohol plasticized with glycerol. The 5-FU-conjugated nanoparticles were synthesized via a single-step co-precipitation process, offering a unique approach. Characterization confirmed successful drug conjugation, revealing bar-shaped nanoparticles with sizes ranging from 90 to 100 nm. Drug release kinetics followed the Korsmeyer-Peppas model, indicating controlled release behavior. Maximum swelling ratio studies of the gelatin-chitosan film showed pH-dependent characteristics, highlighting its versatility. Comprehensive analysis using SEM, FT-IR, Raman, and EDX spectra confirmed the presence of gelatin, chitosan, and 5-FU/ZnO nanoparticles within the biofilms. These biofilms exhibited non-cytotoxicity to human fibroblasts and significant anticancer activity against skin cancer cells, demonstrating their potential for biomedical applications. This versatility positions the 5-FU/ZnO-loaded sheets as promising candidates for localized topical patches in skin and oral cancer treatment, underscoring their practicality and adaptability for therapeutic applications.

A comprehensive review on recent progress in chitosan composite gels for biomedical uses

Chitosan (CS) composite gels have emerged as promising materials with diverse applications in biomedicine. This review provides a concise overview of recent advancements and key aspects in the development of CS composite gels. The unique properties of CS, such as biocompatibility, biodegradability, and antimicrobial activity, make it an attractive candidate for gel-based composites. Incorporating various additives, such as nanoparticles, polymers, and bioactive compounds, enhances the mechanical, thermal, and biological and other functional properties of CS gels. This review discusses the fabrication methods employed for CS composite gels, including blending and crosslinking, highlighting their influence on the final properties of the gels. Furthermore, the uses of CS composite gels in tissue engineering, wound healing, drug delivery, and 3D printing highlight their potential to overcome a number of the present issues with drug delivery. The biocompatibility, antimicrobial properties, electroactive, thermosensitive and pH responsive behavior and controlled release capabilities of these gels make them particularly suitable for biomedical applications. In conclusion, CS composite gels represent a versatile class of materials with significant potential for a wide range of applications. Further research and development efforts are necessary to optimize their properties and expand their utility in pharmaceutical and biomedical fields.

Self-Signal-Triggered Drug Delivery System for Tumor Therapy Using Cancer Cell Membrane-Coated Biocompatible Mn3O4 Nanocomposites

In anti-cancer metastasis treatment, precise drug delivery to cancer cells remains a challenge. Innovative nanocomposites are developed to tackle these issues effectively. The approach involves the creation of manganese oxide (Mn3O4) nanoparticles (NPs) and their functionalization using trisodium citrate to yield functionalized Mn3O4 NPs (F-Mn3O4 NPs), with enhanced water solubility, stability, and biocompatibility. Subsequently, the chemotherapeutic drug doxorubicin (DOX) is encapsulated with Mn3O4 NPs, resulting in DOX/Mn3O4 NPs. To achieve cell-specific targeting, These NPs are coated with HeLa cell membranes (HCM), forming HCM/DOX/Mn3O4. For further refinement, a transferrin (Tf) receptor is integrated with cracked HCM to create Tf-HCM/DOX/Mn3O4 nanocomposites (NC) with specific cell membrane targeting capabilities. The resulting Tf-HCM/DOX/Mn3O4 NC exhibits excellent drug encapsulation efficiency (97.5%) and displays triggered drug release when exposed to NIR laser irradiation in the tumor's environment (pH 5.0 and 6.5). Furthermore, these nanocomposites show resistance to macrophage uptake and demonstrate homotypic cancer cell targeting specificity, even in the presence of other tumor cells. In vitro toxicity tests show that Tf-HCM/DOX/Mn3O4 NC achieves significant anticancer activity against HeLa and BT20 cancer cells, with percentages of 76.46% and 71.36%, respectively. These results indicate the potential of Tf-HCM/DOX/Mn3O4 NC as an effective nanoplatform for chemo-photothermal therapy.

A pH-sensitive silica nanoparticles for colon-specific delivery and controlled release of catechin: Optimization of loading efficiency and in vitro release kinetics

Catechin is a naturally occurring flavonoid of the flavan-3-ol subclass with numerous biological functions; however, these benefits are diminished due to several factors, including low water solubility and degradation in the stomach's harsh environment. So, this study aimed to develop an intelligent catechin colon-targeting delivery system with a high loading capacity. This was done by coating surface-decorated mesoporous silica nanoparticles with a pH-responsive enteric polymer called Eudragit®-S100. The pristine wormlike mesoporous silica nanoparticles (< 100 nm) with high surface area and large total pore volume were effectively synthesized and modified with the NH2 group using the post-grafting strategy. Various parameters, including solvent polarity, catechin-carrier mass ratio, and adsorption time, were studied to improve the loading of catechin into the aminated silica nanoparticles. Next, the negatively charged Eudragit®-S100 was electrostatically coated onto the positively charged aminated nanocarriers to shield the loaded catechin from the acidic environment of the stomach (pH 1.9) and to facilitate site-specific delivery in the acidic environment of the colon (pH 7.4). The prepared nanomaterials were evaluated using several methods, including The Brauner-Emmett-Teller, surface area analyzer, zeta sizer, Field Emission Scanning Electron Microscope, Powder X-Ray Diffraction, Fourier Transform Infrared Spectroscopy, Energy-Dispersive X-ray Spectroscopy, and Differential Scanning Calorimetry. In vitro dissolution studies revealed that Eudragit®-S100-coated aminated nanomaterials prevented the burst release of the loaded catechin in the acidic environment, with approximately 90% of the catechin only being released at colonic pH (pH > 7) with a supercase II transport mechanism. As a result, silica nanoparticles coated with Eudragit®-S100 would provide an innovative and promising approach in targeted nanomedicine for the oral delivery of catechin and related medicines for treating diseases related to the colon, such as colorectal cancer and irritable bowel syndrome.

Surface Engineering of Nanomaterials with Polymers, Biomolecules, and Small Ligands for Nanomedicine

Nanomedicine is a speedily growing area of medical research that is focused on developing nanomaterials for the prevention, diagnosis, and treatment of diseases. Nanomaterials with unique physicochemical properties have recently attracted a lot of attention since they offer a lot of potential in biomedical research. Novel generations of engineered nanostructures, also known as designed and functionalized nanomaterials, have opened up new possibilities in the applications of biomedical approaches such as biological imaging, biomolecular sensing, medical devices, drug delivery, and therapy. Polymers, natural biomolecules, or synthetic ligands can interact physically or chemically with nanomaterials to functionalize them for targeted uses. This paper reviews current research in nanotechnology, with a focus on nanomaterial functionalization for medical applications. Firstly, a brief overview of the different types of nanomaterials and the strategies for their surface functionalization is offered. Secondly, different types of functionalized nanomaterials are reviewed. Then, their potential cytotoxicity and cost-effectiveness are discussed. Finally, their use in diverse fields is examined in detail, including cancer treatment, tissue engineering, drug/gene delivery, and medical implants.

Using Chitosan or Chitosan Derivatives in Cancer Therapy

Cancer is one of the major causes of death worldwide. Chemotherapeutic drugs have become a popular choice as anticancer agents. Despite the therapeutic benefits of chemotherapeutic drugs, patients often experience side effects and drug resistance. Biopolymers could be used to overcome some of the limitations of chemotherapeutic drugs, as well as be used either as anticancer agents or drug delivery vehicles. Chitosan is a biocompatible polymer derived from chitin. Chitosan, chitosan derivatives, or chitosan nanoparticles have shown their promise as an anticancer agent. Additionally, functionally modified chitosan can be used to deliver nucleic acids, chemotherapeutic drugs, and anticancer agents. More importantly, chitosan-based drug delivery systems improved the efficacy, potency, cytotoxicity, or biocompatibility of these anticancer agents. In this review, we will investigate the properties of chitosan and chemically tuned chitosan derivatives, and their application in cancer therapy.

Therapeutic targets, novel drugs, and delivery systems for diabetes associated NAFLD and liver fibrosis

Type 2 diabetes mellitus (T2DM) associated non-alcoholic fatty liver disease (NAFLD) is the fourth-leading cause of death. Hyperglycemia induces various complications, including nephropathy, cirrhosis and eventually hepatocellular carcinoma (HCC). There are several etiological factors leading to liver disease development, which involve insulin resistance and oxidative stress. Free fatty acid (FFA) accumulation in the liver exerts oxidative and endoplasmic reticulum (ER) stresses. Hepatocyte injury induces release of inflammatory cytokines from Kupffer cells (KCs), which are responsible for activating hepatic stellate cells (HSCs). In this review, we will discuss various molecular targets for treating chronic liver diseases, including homeostasis of FFA, lipid metabolism, and decrease in hepatocyte apoptosis, role of growth factors, and regulation of epithelial-to-mesenchymal transition (EMT) and HSC activation. This review will also critically assess different strategies to enhance drug delivery to different cell types. Targeting nanocarriers to specific liver cell types have the potential to increase efficacy and suppress off-target effects.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

CS/Au/MWCNT nanohybrid as an efficient carrier for the sustained release of 5-FU and a study of its cytotoxicity on MCF-7

The chemical reduction method has been used to adeptly synthesize a CS/Au/MWCNT nanocomposite, to be used as a carrier for the effectual delivery of the anticancer drug 5-Fluorouracil. The work aims at utilizing the less investigated ternary nanocomposite system containing chitosan (CS), gold (Au) and MWCNT's to attain higher encapsulation efficiency and to enable a more sustained and prolonged release of 5-FU. This system has improved cytotoxicity when compared to the CS/Au binary system. The prepared sample has been characterized using various techniques that confirm the formation of the nanocomposite, encapsulation of 5-FU into the nanocomposite, the structure of 5-FU and Au in the nanocomposite and the formation of the polymer matrix nanocomposite. An increase in the encapsulation efficiency to 98% and loading efficiency to 43% is observed when compared to the binary composite, elucidating the importance of incorporation of carbon nanotubes into the nanocomposite. A reduction in the release percentage of 5-FU by 40% indicates a more prolonged release, which will enable a reduction of the number of dosages that need to be administered. This in turn leads to a reduction in the side effects posed by the drug 5-FU. Moreover, the effectiveness of the drug loaded nanocomposite system towards the inhibition of breast cancer cells, apparent from the attainment of 50% cell viability while taking sample concentrations as low as 25 μg ml-1, makes this ternary nanocomposite superior and significant.

Thiolated polymer nanocarrier reinforced with glycyrrhetinic acid for targeted delivery of 5-fluorouracil in hepatocellular carcinoma

The present work investigates the targeting efficacy of a novel thiolated polymer-based nanocomposite reinforced with glycyrrhetinic acid (GA) and loaded with 5-fluorouracil in hepatocellular carcinoma (HCC). The thiolated polymers were synthesized by EDAC-mediated conjugation reactions and lyophilization. The nanoparticles were prepared by solvent diffusion and high-pressure homogenization method. The prepared nanocomposite was characterized by Fourier transform infrared (FTIR) radiation, x-ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. Pharmacological evaluation of the formulation was carried out on a rat model of diethylnitrosamine (DEN), and carbon tetrachloride (CCl₄)-induced HCC and MTT assay was carried out with HEP-G2 cell line. In silico studies were conducted to investigate the probable mechanistic pathway of the nanocomposite. FTIR and XRD analysis indicated the successful thiolation of the polymers and confirmed the formation of the nanocomposite without any incompatibilities. DLS, SEM/EDX and AFM characterization confirmed that the nanoparticles were within the nano-size range. MTT assay implied the cytotoxic nature of the nanocomposite against hepatic carcinoma cells. The in vivo study revealed that serum SGOT, SGPT, ALP, GGT and total bilirubin levels were significantly reduced, in comparison with disease control and the result was confirmed by histopathology studies. The results of the HPLC analysis of liver homogenate confirmed the liver targeting ability of the nanocomposite. In silico studies exhibited significant binding affinity of GA and thiolated Eudragit towards liver homolog receptor-1 (LRH-1) suggesting that the developed nanocomposite could be a potential material for the treatment of HCC.

Chitosan: A compound for drug delivery system in gastric cancer-a review

Gastric cancer is known as the fourth most common cancer and the second main cause of cancer-related deaths. Gastric cancer has some characteristics including high incidence rates of metastasis and mortality as well as low rates of early diagnosis, radical resection and 5-year survival. Radical surgery and following chemotherapy has been done for patients with early gastric cancer leading to 90 % survival rate in 5-year after operation. Besides, in advanced stage some cases don't have the chance of surgery as well as the risk of metastasis is high in these patients overally leading to poor prognosis. In recent years, finding a suitable drug delivery system for chemotherapeutic drugs in gastric cancer is an considerable subject for researchers. Chitosan is known as an appropriate compound for chemo-drug delivery in cancer treatment due to its high biodegradability and biocompatibility. Moreover, trans-mucosal drug delivery is facilitated by chitosan via its mucoadhesive and cationic features enhancing interaction with mucous membrane. In addition, a large amount of experimental evidence has reported the efficacy of chitosan for drug delivery in gastric cancer. Thus, the aim of this article was to review this evidence as well as new chitosan-based drug delivery systems investigated in gastric cancer.

5-Fluorouracil monodispersed chitosan microspheres: Microfluidic chip fabrication with crosslinking, characterization, drug release and anticancer activity

Different size and morphology monodispersed chitosan (CS) microspheres loaded with the anticancer drug of 5-fluorouracil (5-Fu) were prepared by the microfluidic method assisted by a crosslinking unit with crosslinkers of tripolyphosphate (TPP) and glutaraldehyde (GTA). The sizes, morphologies, drug loading, encapsulation efficiency, drug release and cytotoxicity of 5-Fu loaded CS microspheres were characterized and determined. Results indicated that the CS microspheres were uniform in size distributions. They possessed excellent encapsulation efficiency and drug loading. The TPP-crosslinked CS microspheres had rough surfaces and exhibited faster drug release, whereas the CS microspheres crosslinked with GTA had smooth surfaces and showed slower drug release. Furthermore, 5-Fu-loaded CS microspheres exhibited sustained drug release which well fitted the first-order kinetics model and were pH-responsive in that the drug cumulative release was greater at acidic environments than at neutral conditions. Finally, 5-Fu loaded CS microspheres provided sufficient cytotoxicity and were satisfactory in the cancer cell inhibition.

Fabrication of bioactive rifampicin loaded κ-Car-MA-INH/Nano hydroxyapatite composite for tuberculosis osteomyelitis infected tissue regeneration

Biocompatible polymers and ceramic materials have been identified as vital components to fabricate drug delivery and tissue engineering applications because of their high drug loading capability, sustained release and higher mechanical strength with remarkable in-vivo bioavailability. In the present work, initially we designed κ-carrageenan grafted with maleic anhydride and then reacted it with isoniazid drug (κ-Car-MA-INH). The polymeric system was cross linked with nanohydroxyapatite (NHAP) via electrostatic interaction followed by the addition of rifampicin (RF) and loaded to fabricate κ -Car-MA-INH/NHAP/RF nanocomposites. The chemical modification and interaction of drug with the polymeric-ceramic system were characterised by Fourier Transform Infrared spectroscopy (FT-IR). The zeta potential of the κ -Car-MA-INH/NHAP/RF nanocomposite was observed to be -20.04 mV using Zetasizer. The in vitro drug release studies demonstrated that the nanocomposite releases 76% of RF and 82% of INH in 12 days at pH 5.5. Scanning Electron Microscope analysis revealed the structural deformation of Staphylococcus aureus and Klebsiella pneumoniae upon treatment with this nanocomposite. By using ex-vivo studies combined with physio-chemical characterization methods on the erythrocytes, L929 and MG-63 cell lines, this composite was found to be biocompatible, non-cytotoxic and inducing cell proliferation with less significant hemolysis. Thus, our modified drug delivery nanocomposites afforded higher drug bioavailability with large potential for fabrication as long-acting drug delivery nanocomposites, especially with hydrophobic drugs inducing the growth of osteoblastic bone cells.

Chitin/Chitosan: Versatile Ecological, Industrial, and Biomedical Applications

Chitin is a linear polysaccharide of N-acetylglucosamine, which is highly abundant in nature and mainly produced by marine crustaceans. Chitosan is obtained by hydrolytic deacetylation. Both polysaccharides are renewable resources, simply and cost-effectively extracted from waste material of fish industry, mainly crab and shrimp shells. Research over the past five decades has revealed that chitosan, in particular, possesses unique and useful characteristics such as chemical versatility, polyelectrolyte properties, gel- and film-forming ability, high adsorption capacity, antimicrobial and antioxidative properties, low toxicity, and biocompatibility and biodegradability features. A plethora of chemical chitosan derivatives have been synthesized yielding improved materials with suggested or effective applications in water treatment, biosensor engineering, agriculture, food processing and storage, textile additives, cosmetics fabrication, and in veterinary and human medicine. The number of studies in this research field has exploded particularly during the last two decades. Here, we review recent advances in utilizing chitosan and chitosan derivatives in different technical, agricultural, and biomedical fields.

Investigation of the blends of chitosan and tragacanth as potential drug carriers for the delivery of ibuprofen in the intestine

This study provides a new potential hydrogel for the intestinal delivery of ibuprofen.

Adsorption of Cu(II) and Zn(II) Ions from Aqueous Solution by Gel/PVA-Modified Super-Paramagnetic Iron Oxide Nanoparticles

Super-paramagnetic iron oxide nanoparticles (SPIONs)/gelatin (gel)/polyvinyl alcohol (PVA) nanoparticles were designed and synthesized by the co-precipitation method and further modified with gel and PVA. These nanoparticles were used for the removal of Cu(II) and Zn(II) from aqueous solutions. The adsorbents were rich in different functional groups for chemisorption and showed effective adsorption properties. The adsorption of Cu(II) and Zn(II) on the SPIONs/gel and SPIONs/gel/PVA materials were investigated with respect to pH, adsorption kinetics, and adsorption isotherms. The adsorption data was fitted to the Langmuir, Freundlich, and Sips models at the optimum pH 5.2 (±0.2) over 60 min; SPIONs/gel showed maximum adsorption capacities of 47.594 mg/g and 40.559 mg/g for Cu(II) and Zn(II); SPIONs/gel/PVA showed those of 56.051 mg/g and 40.865 mg/g, respectively. The experimental data fitted the pseudo-second-order model, indicating that the process followed chemical monolayer adsorption. In addition, the SPIONs/gel/PVA showed better stability and Cu(II) adsorption efficiency than SPIONs/gel.

Protein-polysaccharide nanohybrids: Hybridization techniques and drug delivery applications

Complex nanosystems fabricated by hybridization of different types of materials such as lipids, proteins, or polysaccharides are usually superior to simple ones in terms of features and applications. Proteins and polysaccharides hold great potential for development of nanocarriers for drug delivery purposes based on their unique biocompatibility, biodegradability, ease of functionalization, improved biodistribution and minimal toxicity profiles. Protein-polysaccharide nanohybrids have gained a lot of attention in the past few years particularly for drug delivery applications. In this review, different hybridization techniques utilized in the fabrication of such nanohybrids including electrostatic complexation, Maillard conjugation, chemical coupling and electrospinning were thoroughly reviewed. Moreover, various formulation factors affecting the characteristics of the formed nanohybrids were discussed. We also reviewed in depth the outcomes of such hybridization ranging from stability enhancement, to toxicity reduction, improved biocompatibility, and drug release modulation. We also gave an insight on their limitations and what hinders their clinical translation and market introduction.

Silver nanoparticle functionalized CS-g-(CA-MA-PZA) carrier for sustainable anti-tuberculosis drug delivery

Recently, drug functionalized biodegradable polymers have been appreciated to be imperative to fabricate multi-drug delivery nanosystems for sustainable drug release. In this work, amphiphilic chitosan-grafted-(cetyl alcohol-maleic anhydride-pyrazinamide) (CS-g-(CA-MA-PZA)) was synthesized by multi-step reactions. The incorporation of rifampicin (RF) and entrapment of silver nanoparticles (Ag NPs) on CS-g-(CA-MA-PZA) polymer was carried out by dialysis technique. From the FT-IR experiment, the polymer modification, incorporation of drugs and the entrapment of Ag NPs on micelles were confirmed. The surface morphology of Ag NPs, polymeric system and drug loaded micelles was described by SEM, TEM and AFM techniques. In addition, the controlled release behaviour of CS-g-(CA-MA-PZA) micelles was studied by UV-Vis spectroscopy. In vitro cell viability, cell apoptosis and cellular uptake experiments shows that multi-drug delivery system could enhance the biocompatibility and higher the cytotoxicity effect on the cells. Since the prepared amphiphilic polymeric micelles exhibit spotty features and the system is a promising strategy for a novel candidate for immediate therapeutically effects for alveolar macrophages.

A pH-sensitive guar gum-grafted-lysine-β-cyclodextrin drug carrier for the controlled release of 5-flourouracil into cancer cells

The physiological environment is a crucial factor in biomedical systems, which can be regulated with relative ease both in vitro and in vivo.

Multifaceted Applications of Chitosan in Cancer Drug Delivery and Therapy

Chitosan is a versatile polysaccharide of biological origin. Due to the biocompatible and biodegradable nature of chitosan, it is intensively utilized in biomedical applications in scaffold engineering as an absorption enhancer, and for bioactive and controlled drug release. In cancer therapy, chitosan has multifaceted applications, such as assisting in gene delivery and chemotherapeutic delivery, and as an immunoadjuvant for vaccines. The present review highlights the recent applications of chitosan and chitosan derivatives in cancer therapy.

Zn2+cross-linked sodium alginate-g-allylamine-mannose polymeric carrier of rifampicin for macrophage targeting tuberculosis nanotherapy

Our aim was to evaluate the capacity of polymeric nanoparticles (PNPs) to selectively deliver an antituberculosis drug (rifampicin; RF) to alveolar macrophages.

Mineral-substituted hydroxyapatite reinforced poly(raffinose-citric acid)–polyethylene glycol nanocomposite enhances osteogenic differentiation and induces ectopic bone formation

Progress of biomimetic mineral-substituted hydroxyapatite reinforced poly(raffinose-citric acid)–polyethylene glycol–poly(raffinose-citric acid) for prospective ectopic bone formation.

Recent advances in engineered chitosan-based nanogels for biomedical applications

Recent progress in the preparation and biomedical applications of engineered chitosan-based nanogels has been comprehensively reviewed.

Magneto-chemotherapy for cervical cancer treatment with camptothecin loaded Fe3O4 functionalized β-cyclodextrin nanovehicle

We portray a novel way to synthesis of iron oxide magnetic nanoparticle incorporated β-cyclodextrin (β-CD) nanocarrier stabilized by ethylenediamine tetra acetic acid (EDTA) obtaining remarkable biocompatibility and biodegradability.

Multi-Responsive "Turn-On" Nanocarriers for Efficient Site-Specific Gene Delivery In Vitro and In Vivo

Systemic gene delivery is a complicated and multistep process that confronts numerous biological barriers. It remains a formidable challenge to exploit a single gene carrier with multiple features to combat all obstacles collectively. Herein, a multi-responsive "turn-on" polyelectrolyte complex (DNA/OEI-SS_x /HA-SS-COOH, DSS) delivery system is demonstrated with a sequential self-assembly of disulfide-conjugated oligoethylenimine (OEI-SS_x ) and disulfide bond-modified hyaluronic acid envelope (HA-SS-COOH) that can combat multiple biological barriers collectively when administered intravenously. DSS is designed to effectively accumulate at the tumor tissue and to be internalized into tumor cells by recognizing CD44. The multi-responsive "turn-on" DSS can respond to the alterations of hyaluronidases and glutathione at both the tumor site and at the intracellular milieu. Sequential degradation and detachment of the HA-SS-COOH envelope followed by the dissociation of the OEI-SSx/DNA inner core contributes to the activation of the endosomal escape and gene release functions, thus greatly enhancing nuclear gene delivery. A systematic investigation of DSS has revealed that the tumor accumulation ability, internalization, and endosome escape of the DSS nanocarriers, DNA unpacking and nuclear transportation are all remarkably improved by the multi-responsive "turn-on" design resulting in highly efficient gene transfection in vitro and in vivo.

Development of antimicrobial and scar preventive chitosan hydrogel wound dressings

Antimicrobial and scar preventive wound dressings were developed by coating a blend of chitosan (CS), polyethylene glycol (PEG) and polyvinyl pyrolidone (PVP) on the cotton fabric and subsequent freeze drying. The miscibility of blend systems and functional group interaction were investigated by attenuated total reflectance-infra red spectroscopy. The scanning electron microscopy of the coated fabric revealed porous structure. The porosity of the material was 54-70% and the pore size was in the range of 75-120μm depending on the blend composition. The air permeability diminished as the PVP content increased. The water vapour transmission rate was in the range of 2000-3500g/m(2)day which may offer to be proper material for the wound dressing with moderate exudate absorption. Tetracycline hydrochloride was used as model drug within the hydrogel matrix. The cumulative release of drug was found to be ∼80% of the total loading after ∼48h. The drug loaded dressings showed good antimicrobial nature against both gram positive and gram negative bacteria. In vivo wound healing and tissue compatibility studies were carried out over a period of 21 days on full-thickness skin wounds created on male Wistar rats. Fast healing was observed in drug loaded dressing treated wounds with minimum scarring, as compared to the other groups. These results suggest that drug loaded dressing could provide scar preventive wound healing.

Formation and characterization of β-cyclodextrin (β-CD) - polyethyleneglycol (PEG) - polyethyleneimine (PEI) coated Fe3O4 nanoparticles for loading and releasing 5-Fluorouracil drug

In this work, β-cyclodextrin (β-CD) - polyethyleneglycol (PEG) - polyethyleneimine (PEI) coated iron oxide nanoparticles (Fe3O4-β-CD-PEG-PEI) were developed as drug carriers for drug delivery applications. The 5- Fluorouracil (5-FU) was chosen as model drug molecule. The developed nanoparticles (Fe3O4-β-CD-PEG-PEI) were characterized by various techniques such as Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometry (VSM). The average particles size range of 5-FU loaded Fe3O4-β-CD, Fe3O4-β-CD-PEG and Fe3O4-β-CD-PEG-PEI nanoparticles were from 151 to 300nm and zeta potential value of nanoparticles were from -43mV to -20mV as measured using Malvern Zetasizer. Finally, encapsulation efficiency (EE), loading capacity (LC) and in-vitro drug release performance of 5-FU drug loaded Fe3O4-β-CD, Fe3O4-β-CD-PEG and Fe3O4-β-CD-PEG-PEI nanoparticles was evaluated by UV-vis spectroscopy. In-vitro cytotoxicity tests investigated by MTT assay indicate that 5-FU loaded Fe3O4-β-CD-PEG-PEI nanoparticles were toxic to cancer cells and non-toxic to normal cells. The in-vitro release behavior of 5-FU from drug (5-FU) loaded Fe3O4-β-CD-PEG-PEI composite at different pH values and temperature was studied. It was found that 5-FU was released faster in pH 6.8 than in the acidic mediums (pH 1.2), and the released quantity was higher. Therefore, the newly prepared Fe3O4-β-CD-PEG-PEI carrier exhibits a promising potential capability for anticancer drug delivery in tumor therapy.

Surface functionalization of natural lignin isolated from Aloe barbadensis Miller biomass by atom transfer radical polymerization for enhanced anticancer efficacy

Lignin (LIG), one of the major natural polymers in the biomass is widely used for various industrial and biomedical applications, mainly in its modified form of grafted lignin.

Dual-functionalisation of gelatine nanoparticles with an anticancer platinum(ii)–bisphosphonate complex and mineral-binding alendronate

Mineral-binding gelatine nanoparticles can be loaded with tailored amounts of anticancer molecules, which may benefit the development of bone-seeking carriers for targeted delivery of drugs to treat bone tumours.