Zinc oxide/silver nanoarrays as reusable SERS substrates with controllable 'hot-spots' for highly reproducible molecular sensing

High performance and recyclable Ag/ZnO/PM substrate for the detection of organic pollutants

A sensitive and recyclable substrate was fabricated through in situ reduction of silver nanoparticles (NPs) on zinc oxide nanorods (NRs). The prepared silver nanoparticles/zinc oxide nanorods/polyamide mesh (Ag/ZnO/PM) substrate exhibited not only excellent surface-enhanced Raman scattering (SERS) performance to R6G with a limit of detection (LOD) of 10-12 M, mainly attributed to the synergistic effect of the suitable size and the nanoscale gaps of the Ag NPs to produce local surface plasmon resonance (LSPR), but also outstanding self-cleaning property via UV irradiation due to its significant photocatalytic property based on the non-equilibrium carriers generated by ZnO and the presence of Schottky junctions between Ag and ZnO. The substrate showed good recycling stability even after five cycles. Furthermore, the successful recyclable application of Ag/ZnO/PM for tetracycline hydrochloride (TC) detection with high sensitivity further suggested that it is a promising candidate for constructing a portable SERS platform to detect organic pollutants.

ZnO@Ag-Functionalized Paper-Based Microarray Chip for SERS Detection of Bacteria and Antibacterial and Photocatalytic Inactivation

Bacterial infections caused by pathogenic microorganisms have become a serious, widespread health concern. Thus, it is essential and required to develop a multifunctional platform that can rapidly and accurately determine bacteria and effectively inhibit or inactivate pathogens. Herein, a microarray SERS chip was successfully synthesized using novel metal/semiconductor composites (ZnO@Ag)-ZnO nanoflowers (ZnO NFs) decorated with Ag nanoparticles (Ag NPs) arrayed on a paper-based chip as a supporting substrate for in situ monitoring and photocatalytic inactivation of pathogenic bacteria. Typical Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli and Vibrio parahemolyticus were selected as models. Partial least-squares discriminant analysis (PLS-DA) was performed to minimize the dimensionality of SERS spectra data sets and to develop a cost-effective identification model. The classification accuracy was 100, 97.2, and 100% for S. aureus, E. coli, and V. parahemolyticus, respectively. The antimicrobial activity of ZnO@Ag was proved by the microbroth dilution method, and the minimum inhibitory concentrations (MICs) of S. aureus, E. coli, and V. parahemolyticus were 40, 50, and 55 μg/mL, respectively. Meanwhile, it demonstrated remarkable photocatalytic performance under natural sunlight for the inactivation of pathogenic bacteria, and the inactivation rates for S. aureus, E. coli, and V. parahemolyticus were 100, 97.03 and 97.56%, respectively. As a result, the microarray chip not only detected the bacteria with high sensitivity but also confirmed the antibacterial and photocatalytic sterilization properties. Consequently, it offers highly prospective strategies for foodborne diseases caused by pathogenic bacteria.

Recent advances in surface enhanced Raman spectroscopy for bacterial pathogen identifications

BACKGROUND

The rapid and reliable detection of pathogenic bacteria at an early stage is a highly significant research field for public health. However, most traditional approaches for pathogen identification are time-consuming and labour-intensive, which may cause physicians making inappropriate treatment decisions based on an incomplete diagnosis of patients with unknown infections, leading to increased morbidity and mortality. Therefore, novel methods are constantly required to face the emerging challenges of bacterial detection and identification. In particular, Raman spectroscopy (RS) is becoming an attractive method for rapid and accurate detection of bacterial pathogens in recent years, among which the newly developed surface-enhanced Raman spectroscopy (SERS) shows the most promising potential.

AIM OF REVIEW

Recent advances in pathogen detection and diagnosis of bacterial infections were discussed with focuses on the development of the SERS approaches and its applications in complex clinical settings.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The current review describes bacterial classification using surface enhanced Raman spectroscopy (SERS) for developing a rapid and more accurate method for the identification of bacterial pathogens in clinical diagnosis. The initial part of this review gives a brief overview of the mechanism of SERS technology and development of the SERS approach to detect bacterial pathogens in complex samples. The development of the label-based and label-free SERS strategies and several novel SERS-compatible technologies in clinical applications, as well as the analytical procedures and examples of chemometric methods for SERS, are introduced. The computational challenges of pre-processing spectra and the highlights of the limitations and perspectives of the SERS technique are also discussed.Taken together, this systematic review provides an overall summary of the SERS technique and its application potential for direct bacterial diagnosis in clinical samples such as blood, urine and sputum, etc.

Multi-dimensional plasmonic coupling system for efficient enrichment and ultrasensitive label-free SERS detection of bilirubin based on graphene oxide-Au nanostars and Au@Ag nanoparticles

Rapid and sensitive detection of free bilirubin (BR) is essential for early diagnosis of jaundice and other hepatobiliary diseases. Inspired by sandwich immunoassay strategy, a multi-dimensional plasmonic coupling SERS platform composed of graphene oxide-Au nanostars nanocomposites (GANS NCs) and Au@Ag nanoparticles (NPs) was designed for label-free detection of BR. Specifically, GANS NCs were first prepared, and their excellent SERS activity was ascribed to synergistic enhancement effect of electromagnetic enhancement and chemical enhancement. Furthermore, SERS spectroscopy was used to monitor the adsorption process of BR. Subsequently, secondary reinforcing Au@Ag NPs were directly added, ultimately resulting in a multi-dimensional plasmonic coupling effect. The SERS enhancing mechanism of coupled system was discussed through electromagnetic field simulations. Interestingly, the high-density hotspots generated by strong plasmonic coupling in GANS-Au@Ag substrate could lead to more extraordinary SERS enhancing behavior compared to GANS NCs. Sensing efficiency of the SERS platform was examined by BR with a detection limit down to 10^-11 M. Besides, GANS-Au@Ag NCs performed high uniformity and reproducibility. This work not only opens up a new avenue for construction of multi-dimensional plasmonic coupling system, but also offers a new biosensing technology for label-free diagnosis of BR-related diseases, thereby expecting to be applied in clinical diagnosis.

Bionic Plasmonic Nanoarrays Excited by Radially Polarized Vector Beam for Metal-Enhanced Fluorescence

Metal-enhanced fluorescence (MEF) is an important fluorescence technology due to its ability to significantly improve the fluorescence intensity. Here, we present a new MEF configuration of the bionic nanorod array illuminated by radially polarized vector beam (RVB). The bionic nanorod array is fabricated via a nanoimprinting method by using the wings of the Chinese cicada "meimuna mongolica" as bio-templates, and later coating gold film by ion sputtering deposition method. The MEF performance of the prepared substrate is tested by a home-made optical system. The experiment results show that, in the case of RVB excitation, the intensity of fluorescence is more than 10 times stronger with the nano-imprinted substrate than that with glass. Using the bionic nanoarray as a substrate, the intensity of fluorescence is ~2 times stronger via RVB than that by the linearly polarized beam. In addition, the prepared substrate is verified to have good uniformity.

Mg-Doped ZnO Nanoparticles with Tunable Band Gaps for Surface-Enhanced Raman Scattering (SERS)-Based Sensing

Semiconductors have great potential as surface-enhanced Raman scattering (SERS) substrates due to their excellent physiochemical properties. However, they provide low signal enhancements relative to their plasmonic counterparts, which necessitates innovation in their synthesis and application. Substitutional atomic doping is proposed to improve SERS enhancement by controlling electronic properties, such as the band gap. In this work, zinc oxide (ZnO) nanoparticles were synthesized by co-precipitation and doped with magnesium (Mg) at concentrations ranging from 2-10%. Nanoparticle morphology and size were obtained by scanning electron microscopy (SEM). Elemental composition and chemical states were determined using X-ray photoelectron spectroscopy (XPS). Optical properties were obtained with a UV-vis spectrophotometer, while a Raman spectrometer was used to acquire Raman signal enhancements. Stability was assessed by UV-vis spectroscopy, while cytotoxicity was evaluated by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The results showed that the absorption edge of Mg-doped ZnO nanoparticles was red-shifted compared to pure ZnO nanoparticles. The band gap decreased (3.3-3.01 eV) with increasing Mg doping, while the highest Raman enhancement was observed at 2% doping. No significant cytotoxic effects were observed at low concentrations (3-12 μg/mL). Overall, this study provides evidence for the tunability of ZnO substrates and may serve as a platform for applications in molecular biosensing.

A plasmonic AgNP decorated heterostructure substrate for synergetic surface-enhanced Raman scattering identification and quantification of pesticide residues in real samples

Rapid and on-site Raman spectroscopic identification and quantification of pesticide residues have been restricted to the low instrumental sensitivity of a portable Raman instrument, and no ideal platforms have been reported for analyzing pesticides on real sample surfaces. An efficient method to improve the detection sensitivity is to fabricate a highly sensitive surface-enhanced Raman scattering (SERS) substrate. Here, we present a MOF-derived ZnO@TiO₂ heterostructure combined with plasmonic AgNPs as a SERS sensor to achieve synergetic EM and CM enhancement, exhibiting high sensitivity, excellent signal reproducibility (RSD < 5.9%) and superior stability for analysis of model molecules. The SERS sensor achieved a low detection concentration of 10^-8 M for both CV and R6G molecular solutions on a portable Raman device. As a proof of concept, we modelled a pesticide residue on real samples of dendrobium leaves. Thiram, triazophos and fonofos solutions were selected as analytes for mimicking the function of on-site analysis. The SERS analytical platform showed not only high sensitivity for single- and multi-component identification, but also quantitative detection of pesticide residues on dendrobium leaves. These preliminary investigations indicate that this SERS analytical platform will allow the development and potential applications in rapid and on-site pesticide analysis.

Multifunctional magnetic Fe3O4/Cu2O-Ag nanocomposites with high sensitivity for SERS detection and efficient visible light-driven photocatalytic degradation of polycyclic aromatic hydrocarbons (PAHs)

Polycyclic aromatic hydrocarbons (PAHs) with carcinogenic, teratogenic and mutagenic properties are persistent organic pollutants in the environment. Herein, the novel multifunctional Fe₃O₄/Cu₂O-Ag nanocomposites (NCs) have been established for ultra-sensitive surface-enhanced Raman scattering (SERS) detection and visible light-driven photocatalytic degradation of PAHs. Fe₃O₄/Cu₂O-Ag NCs with different amounts of Ag nanocrystals were synthesized, and the effect of Ag contents on SERS performance was studied by finite-difference time-domain (FDTD) algorithm. The synergistic interplay of electromagnetic and chemical enhancement was responsible for excellent SERS sensitivity of Fe₃O₄/Cu₂O-Ag NCs. The limit of detection (LOD) of optimal SERS substrates (FCA-2 NCs) for Nap, BaP, Pyr and Ant was as low as 10^-9, 10^-9, 10^-9 and 10^-10 M, respectively. The SERS detection of PAHs in actual soil environment was also studied. Moreover, a simple SERS method was used to monitor the photocatalytic process of PAHs. The recovery and reuse of Fe₃O₄/Cu₂O-Ag NCs were achieved through magnetic field, and the outstanding SERS and photocatalytic performance were still maintained even after eight cycles. This magnetic multifunctional NCs provide a unique idea for the integration of ultra-sensitive SERS detection and efficient photocatalytic degradation of PAHs, and thus will have more hopeful prospects in the field of environmental protection.

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

Since the initial discovery of surface-enhanced Raman scattering (SERS) and surface-enhanced fluorescence (SEF), these techniques have shown huge potential for applications in biomedicine, biotechnology, and optical sensors. Both methods rely on the high electromagnetic fields created at locations on the surface of plasmonic metal nanoparticles, depending on the geometry of the nanoparticles, their surface features, and the specific location of analyte molecules. Lately, ZnO-based nanostructures have been exploited especially as SERS substrates showing high enhancement factors and increased charge transfer effect. Additionally, applications focused on enhancing the fluorescence of analyte molecules as well as on tuning the photoluminescence properties of ZnO nanostructures through combination with metal nanoparticles. This review covers the major recent results of ZnO-based nanostructures used for fluorescence and Raman signal enhancement. The broad range of ZnO and ZnO-metal nanostructures synthesis methods are discussed, highlighting low-cost methods and the recyclability of ZnO-based nanosubstrates. Also, the SERS signal enhancement by ZnO-based nanostructures and the influences of lattice defects on the SERS signal are described. The photoluminescence enhancement of ZnO in the presence of noble metal nanoparticles and the molecular fluorescence enhancement in the presence of ZnO alone and in combination with metal nanoparticles are also reviewed.

Improved SERS performance of silver triangular nanoparticles / TiO2 nanoarrays heterostructure and its application for food additives detection

A novel Ag triangle nanoparticles/TiO2 nanorod array (AgNTs/TNA) heterostructure was designed as a surface-enhanced Raman scattering (SERS) active substrate for the sensitive detection of Rhodamine 6G (R6G), Crystal Violet (CV),...

Trapping analytes into dynamic hot spots using Tyramine-medicated crosslinking chemistry for designing versatile sensor

HYPOTHESIS

Due to the intrinsic nature of the surface-enhanced Raman scattering (SERS), the detection of molecules with weak binding affinities toward metal substrates is critical for development of a universal SERS sensing platform. We hypothesized the physical trapping of small pesticide molecules for active hot spot generation using tyramine-mediated crosslinking chemistry and silver nanoparticles (Ag NPs) enhances SERS detection sensitivity.

EXPERIMENTS

Tyramine-mediated crosslinking chemistry for sensor application was validated by ultraviolet-visible absorption spectroscopy, scanning electron microscopy, dynamic light scattering, and Raman spectroscopy. SERS sensing platform using tyramine-mediated crosslinking reaction was systematically studied for detection of 1,4-dyethylnylbenzene as a model analyte. This sensor system was applied to detect two other pesticides, thiabendazole and 1,2,3,5-tetrachlorobenzene, which have different binding affinities toward metal surfaces.

FINDINGS

The SERS signal of 1,4-dyethylnylbenzene obtained using this sensor system was 3.6 times stronger than that obtained using the Ag colloidal due to the nanogap of approximately 1.3 nm within the generated hot spots. This sensor system based on tyramine-mediated crosslinked Ag NPs was evaluated as a promising tool to achieve a solution based sensitive detection of various pesticide molecules that cannot be adsorbed on the surfaces of typical SERS substrates such as metal nanoparticles.

Nanostructure-Based Surface-Enhanced Raman Spectroscopy Techniques for Pesticide and Veterinary Drug Residues Screening

Pesticide and veterinary drug residues in food and environment pose a threat to human health, and a rapid, super-sensitive, accurate and cost-effective analysis technique is therefore highly required to overcome the disadvantages of conventional techniques based on mass spectrometry. Recently, the surface-enhanced Raman spectroscopy (SERS) technique emerges as a potential promising analytical tool for rapid, sensitive and selective detections of environmental pollutants, mostly owing to its possible simplified sample pretreatment, gigantic detectable signal amplification and quick target analyte identification via finger-printing SERS spectra. So theoretically the SERS detection technology has inherent advantages over other competitors especially in complex environmental matrices. The progress in nanostructure SERS substrates and portable Raman appliances will promote this novel detection technology to play an important role in future rapid on-site assay. This paper reviews the advances in nanostructure-based SERS substrates, sensors and relevant portable integrated systems for environmental analysis, highlights the potential applications in the detections of synthetic chemicals such as pesticide and veterinary drug residues, and also discusses the challenges of SERS detection technique for actual environmental monitoring in the future.

Silver nanoparticle on zinc oxide array for label-free detection of opioids through surface-enhanced raman spectroscopy

Opioid abuse is a significant public health problem. Over two million Americans have some form of addiction to opioids; however, despite governmental programs established to treat overdoses and restrict opioid distribution, there are still few screening tools that are quantitative, portable and easy to use for high-throughput mapping and monitoring this ongoing crisis. In this paper, we demonstrated a plasmonic zinc oxide (ZnO) arrays-on-silicon sensor for the label-free detection of opioids through surface-enhanced Raman spectroscopy (SERS), and evaluated the chips' opioid sensing performance. Specifically, we tested our device with oxycodone, a potent and commonly abused opioid, dissolved in methanol and blood serum as a proof-of-concept study. Ag particles were in situ patterned onto the ZnO array to form the completed sensing platform. The resulting Ag@ZnO arrays were characterized using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDS), and element mapping. In addition, the enhanced electric field induced by the localized surface plasmonic resonance at the Ag particle decorated ZnO is simulated using COMSOL. Opioid-containing samples at varying concentrations, from 900 μg mL-1 to 90 ng mL-1 were tested using SERS to characterize the chip's accuracy and sensitivity. We demonstrated that the sensor can reliably detect opioid concentrations as low as 90 ng mL-1 with great accuracy and sensitivity even spiked into blood serum. The chips could provide a cost-effective, high-throughput method for detecting opiate oxycodone, thereby providing a powerful tool to monitor and control the emerging public health threats.

Non-invasive detection of glucose in human urine using a color-generating copper NanoZyme

Renal complications are long-term effect of diabetes mellitus where glucose is excreted in urine. Therefore, reliable glucose detection in urine is critical. While commercial urine strips offer a simple way to detect urine sugar, poor sensitivity and low reliability limit their use. A hybrid glucose oxidase (GOx)/horseradish peroxidase (HRP) assay remains the gold standard for pathological detection of glucose. A key restriction is poor stability of HRP and its suicidal inactivation by hydrogen peroxide, a key intermediate of the GOx-driven reaction. An alternative is to replace HRP with a robust inorganic enzyme-mimic or NanoZyme. While colloidal NanoZymes show promise in glucose sensing, they detect low concentrations of glucose, while urine has high (mM) glucose concentration. In this study, a free-standing copper NanoZyme is used for the colorimetric detection of glucose in human urine. The sensor could operate in a biologically relevant dynamic linear range of 0.5-15 mM, while showing minimal sample matrix effect such that glucose could be detected in urine without significant sample processing or dilution. This ability could be attributed to the Cu NanoZyme that for the first time showed an ability to promote the oxidation of a TMB substrate to its double oxidation diimine product rather than the charge-transfer complex product commonly observed. Additionally, the sensor could operate at a single pH without the need to use different pH conditions as used during the gold standard assay. These outcomes outline the high robustness of the NanoZyme sensing system for direct detection of glucose in human urine. Graphical abstract.

Low-Temperature Hydrogen Sensor: Enhanced Performance Enabled through Photoactive Pd-Decorated TiO2 Colloidal Crystals

The high demand for H₂ gas sensors is not just limited to industrial process control and leak detection applications but also extends to the food and medical industry to determine the presence of various types of bacteria or underlying medical conditions. For instance, sensing of H₂ at low concentrations (<10 ppm) is essential for developing breath analyzers for the noninvasive diagnosis of some gastrointestinal diseases. However, there are major challenges to overcome in order to achieve high sensitivity and hence low limit of detection (LoD) toward H₂. In this study, it is demonstrated that light-assisted amperometric gas sensors employing sensitive layers based on Pd-decorated TiO₂ long-range ordered crystals can achieve excellent H₂ sensing performance. This unique combination of materials and novel layered structure enables the detection of H₂ gas down to 50 ppm with highly promising LoD capabilities. The sensor response profiles revealed that the sensor's signal-to-noise ratio was higher in the presence of light when operated with a 9 V bias (relative to other conditions used), producing a LoD of only 3.5 ppm at an operating temperature of 33 °C. The high performance of the sensor makes it attractive for applications that require low-level (ppm as opposed to conventional % levels) H₂ gas detection. Most importantly, the developed sensor exhibited high selectivity (>93%) toward H₂ over other gas species such as CO₂, C₄H₈O, C₃H₆O, CH₃CHO, and NO, which are commonly found to coexist in the environment.

Reusable Surface-Enhanced Raman Spectroscopy Membranes and Textiles via Template-Assisted Self-Assembly and Micro/Nanoimprinting

Surface-enhanced Raman spectroscopy (SERS) has emerged as a powerful tool for ultrasensitive fingerprint recognition of molecules with considerable potential in wearable biochemical sensing. However, previous efforts to fabricate wearable SERS devices by directly treating fabrics with plasmonic nanoparticles have generated a nonuniform assembly of nanoparticles, weakly adsorbed on fabrics via van der Waals forces. Here, we report the creation of washing reusable SERS membranes and textiles via template-assisted self-assembly and micro/nanoimprinting approaches. Uniquely, we employ the capillary force driven self-assembly process to generate micropatch arrays of Au nanoparticle (NP) aggregates within hydrophobic microstructured templates, which are then robustly bonded onto semipermeable transparent membranes and stretchable textiles using the UV-resist based micro/nanoimprinting technique. A mild reactive ion etching (RIE) treatment of SERS membranes and textiles can physically expose the SERS hotspots of Au NP-aggregates embedded within the polymer UV resist for further improvement of their SERS performance. Also, we demonstrate that the semipermeable transparent SERS membranes can keep the moisture content of meat from evaporating to enable stable in situ SERS monitoring of biochemical environments at the fresh meat surface. By contrast, stretchable SERS textiles can allow the spreading, soaking, and evaporation of solution analyte samples on the fabric matrix for continuous enrichment of analyte molecules at the hotspots in biochemical SERS detection. Due to the mechanical robustness of the UV-resist immobilized Au NP aggregates, simple detergent-water washing with ultrasound sonication or mechanical stirring can noninvasively clean contaminated hot spots to reuse SERS textiles. Therefore, we envision that washing reusable SERS membranes and textiles by template-assisted self-assembly and micro/nanoimprinting fabrication are promising for wearable biochemical sensing applications, such as wound monitoring and body fluid monitoring.

Bacteria Detection: From Powerful SERS to Its Advanced Compatible Techniques

The rapid, highly sensitive, and accurate detection of bacteria is the focus of various fields, especially food safety and public health. Surface-enhanced Raman spectroscopy (SERS), with the advantages of being fast, sensitive, and nondestructive, can be used to directly obtain molecular fingerprint information, as well as for the on-line qualitative analysis of multicomponent samples. It has therefore become an effective technique for bacterial detection. Within this progress report, advances in the detection of bacteria using SERS and other compatible techniques are discussed in order to summarize its development in recent years. First, the enhancement principle and mechanism of SERS technology are briefly overviewed. The second part is devoted to a label-free strategy for the detection of bacterial cells and bacterial metabolites. In this section, important considerations that must be made to improve bacterial SERS signals are discussed. Then, the label-based SERS strategy involves the design strategy of SERS tags, the immunomagnetic separation of SERS tags, and the capture of bacteria from solution and dye-labeled SERS primers. In the third part, several novel SERS compatible technologies and applications in clinical and food safety are introduced. In the final part, the results achieved are summarized and future perspectives are proposed.

Zinc Oxide Nanorod Surface-Enhanced Raman Scattering Substrates without and with Gold Nanoparticles Fabricated through Pulsed-Laser-Induced Photolysis

We fabricated surface-enhanced Raman scattering (SERS) substrates using gold nanoparticle (AuNP)-decorated zinc oxide (ZnO) nanorods (NRs). Prior to decoration with AuNPs, ZnO NRs on the glass substrate fabricated using the sol–gel method could enhance the SERS signal for detecting 10−5 M rhodamine 6G (R6G). Microscopic analysis revealed that the thermal-annealing process for fabricating the seed layers of ZnO facilitated the growth of ZnO NRs with the highly preferred c-axis (002) orientation. A decrease in the diameter of ZnO NRs occurred because of the use of annealed seek layers further increased the surface-to-volume ratio of ZnO NRs, resulting in an increase in the SERS signal for R6G of 10−5 M. To combine the localized surface plasmon resonance (LSPR) mode with the charge transfer (CT) mode, ZnO NRs were decorated with AuNPs through pulsed-laser-induced photolysis (PLIP). However, the preferred vertical (002) orientation of ZnO NRs was prone to the aggregation of AuNPs, which hindered the SERS signal. The experimental results revealed that ZnO NRs with the crystalline structure of horizontal (100) and (101) orientations facilitated the growth of homogeneous, independent and isolated AuNPs which serves as “hot spots” for SERS signal of detecting R6G at a low concentration of 10−9 M. Comparing to previous fabrication of SERS substrate, our method has advantage to fabricate AuNP-decorated ZnO NR in a short time. Moreover, the optimization of the SERS behaviors for different fabrication conditions of AuNPs using the PLIP method was investigated in detail.

Surface Enhanced Raman Spectroscopy in environmental analysis, monitoring and assessment

Environmental pollution is usually monitored via mass spectrometry-based approaches. Such techniques are extremely sensitive but have several disadvantages. The instruments themselves are expensive, require specialized training to use and usually cannot be taken into the field. Samples also usually require extensive pre-treatment prior to analysis which can affect the final result. The development of analytical methods that matched the sensitively of mass spectrometry but that could be deployed in the field and require minimal sample processing would be highly advantageous for environmental monitoring. One method that may meet these criteria is Surface Enhanced Raman Spectroscopy (SERS). This is a surface-sensitive technique that enhances Raman scattering by molecules adsorbed on rough nanostructure surfaces such as gold or silver nanoparticles. SERS gives selective spectral enhancement such that increases in sensitivity of 10¹⁰ to 10¹⁴ have been reported. While this means SERS is, theoretically at least, capable of single molecule detection such a signal enhancement is hard to achieve in practice. In this review the background of SERS is introduced for the environmental scientist and the recent literature on the detection of several classes of environmental pollutants using this technique is discussed. For heavy metals the lowest limit of detection reported was 0.45 μg/L for Mercury; for pharmaceuticals, 2.4 μg/L for propranolol; for endocrine disruptors, 0.35 μg/L for 17β-estradiol; for perfluorinated compounds, 500 μg/L for perfluorooctanoic acid and for inorganic pollutants, 37g/L for general pesticide markers. The signal enhancements achieved in each case show great promise for the detection of pollutants at environmentally relevant concentrations and, although it does not yet routinely match the sensitivity of mass spectrometry. Further work to develop SERS methods and apply them for the detection of contaminants could be of wide benefit for environmental science.

SERS activity and spectroscopic properties of Zn and ZnO nanostructures obtained by electrochemical and green chemistry methods for applications in biology and medicine

This work evaluates the ability of homogeneous, stable, and pure zinc oxide nanoparticles (ZnONPs-GS) synthesized by “green chemistry” for the selective detection of four neurotransmitters present in body fluids and promotion of the SERS effect.

Zinc Titanate Nanoarrays with Superior Optoelectrochemical Properties for Chemical Sensing

In this report, the gas sensing performance of zinc titanate (ZnTiO₃) nanoarrays (NAs) synthesized by coating hydrothermally formed zinc oxide (ZnO) NAs with TiO₂ using low-temperature chemical vapor deposition is presented. By controlling the annealing temperature, diffusion of ZnO into TiO₂ forms a mixed oxide of ZnTiO₃ NAs. The uniformity and the electrical properties of ZnTiO₃ NAs made them ideal for light-activated acetone gas sensing applications for which such materials are not well studied. The acetone sensing performance of the ZnTiO₃ NAs is tested by biasing the sensor with voltages from 0.1 to 9 V dc in an amperometric mode. An increase in the applied bias was found to increase the sensitivity of the device toward acetone under photoinduced and nonphotoinduced (dark) conditions. When illuminated with 365 nm UV light, the sensitivity was observed to increase by 3.4 times toward 12.5 ppm acetone at 350 °C with an applied bias of 9 V, as compared to dark conditions. The sensor was also observed to have significantly reduced the adsorption time, desorption time, and limit of detection (LoD) when excited by the light source. For example, LoD of the sensor in the dark and under UV light at 350 °C with a 9 V bias is found to be 80 and 10 ppb, respectively. The described approach also enabled acetone sensing at an operating temperature down to 45 °C with a repeatability of >99% and a LoD of 90 ppb when operated under light, thus indicating that the ZnTiO₃ NAs are a promising material for low concentration acetone gas sensing applications.

Sources of variability in SERS spectra of bacteria: comprehensive analysis of interactions between selected bacteria and plasmonic nanostructures

The surface-enhanced Raman spectroscopy (SERS)-based analysis of bacteria suffers from the lack of a standard SERS detection protocol (type of substrates, excitation frequencies, and sampling methodologies) that could be employed throughout laboratories to produce repeatable and valuable spectral information. In this work, we have examined several factors influencing the spectrum and signal enhancement during SERS studies conducted on both Gram-negative and Gram-positive bacterial species: Escherichia coli and Bacillus subtilis, respectively. These factors can be grouped into those which are related to the structure and types of plasmonic systems used during SERS measurements and those that are associated with the culturing conditions, types of culture media, and method of biological sample preparation.

Polycyclic Aromatic Hydrocarbons (PAHs) in inland aquatic ecosystems: Perils and remedies through biosensors and bioremediation

Polycyclic Aromatic Hydrocarbons (PAHs) are among the most ubiquitous environmental pollutants of high global concern. PAHs belong to a diverse family of hydrocarbons with over one hundred compounds known, each containing at least two aromatic rings in their structure. Due to hydrophobic nature, PAHs tend to accumulate in the aquatic sediments, leading to bioaccumulation and elevated concentrations over time. In addition to their well-manifested mutagenic and carcinogenic effects in humans, they pose severe detrimental effects to aquatic life. The high eco-toxicity of PAHs has attracted a number of reviews, each dealing specifically with individual aspects of this global pollutant. However, efficient management of PAHs warrants a holistic approach that combines a thorough understanding of their physico-chemical properties, modes of environmental distribution and bioaccumulation, efficient detection, and bioremediation strategies. Currently, there is a lack of a comprehensive study that amalgamates all these aspects together. The current review, for the first time, overcomes this constraint, through providing a high level comprehensive understanding of the complexities faced during PAH management, while also recommending future directions through potentially viable solutions. Importantly, effective management of PAHs strongly relies upon reliable detection tools, which are currently non-existent, or at the very best inefficient, and therefore have a strong prospect of future development. Notably, the currently available biosensor technologies for PAH monitoring have not so far been compiled together, and therefore a significant focus of this article is on biosensor technologies that are critical for timely detection and efficient management of PAHs. This review is focussed on inland aquatic ecosystems with an emphasis on fish biodiversity, as fish remains a major source of food and livelihood for a large proportion of the global population. This thought provoking study is likely to instigate new collaborative approaches for protecting aquatic biodiversity from PAHs-induced eco-toxicity.

Nanostructured silver fabric as a free-standing NanoZyme for colorimetric detection of glucose in urine

Enzyme-mimicking catalytic nanoparticles, more commonly known as NanoZymes, have been at the forefront for the development of new sensing platforms for the detection of a range of molecules. Although solution-based NanoZymes have shown promise in glucose detection, the ability to immobilize NanoZymes on highly absorbent surfaces, particularly on free-standing substrates that can be feasibly exposed and removed from the reaction medium, can offer significant benefits for a range of biosensing and catalysis applications. This work, for the first time, shows the ability of Ag nanoparticles embedded within the 3D matrix of a cotton fabric to act as a free-standing peroxidase-mimic NanoZyme for the rapid detection of glucose in complex biological fluids such as urine. The use of cotton fabric as a template not only allows high number of catalytically active sites to participate in the enzyme-mimic catalytic reaction, the absorbent property of the cotton fibres also helps in rapid absorption of biological molecules such as glucose during the sensing event. This, in turn, brings the target molecule of interest in close proximity of the NanoZyme catalyst enabling accurate detection of glucose in urine. Additionally, the ability to extract the free-standing cotton fabric-supported NanoZyme following the reaction overcomes the issue of potential interference from colloidal nanoparticles during the assay. Based on these unique characteristics, nanostructured silver fabrics offer remarkable promise for the detection of glucose and other biomolecules in complex biological and environmental fluids.

Droplet-Confined Electroless Deposition of Silver Nanoparticles on Ordered Superhydrophobic Structures for High Uniform SERS Measurements

Surface-enhanced Raman scattering spectroscopy (SERS) is a nondestructive testing technique. To increase reproducibility of the SERS measurement is the key issue for improving the performance of SERS. In this article, we demonstrate an efficient method to improve the reproducibility, using confined silver nanoparticles (AgNPs) as a substrate. The AgNPs are formed uniformly on the tops of the prepared nanopillars by droplet-confined electroless deposition on the hydrophobic Si nanopillar arrays. The AgNPs present an excellent reproducibility in Raman measurement; the relative standard deviation is down to 3.40%. There exists a great linear correlation between the concentration of Rhodamine 6G (R6G) and the Raman intensity in the log-log plot; R² is 0.998, indicating that this SERS substrate can be applied for the quantitative SERS analysis. Meanwhile, the minimum detection concentration is down to 10^-11 M on the hydrophobic substrate, with R6G as a probe molecule.

Graphene-Gold Nanoparticles Hybrid-Synthesis, Functionalization, and Application in a Electrochemical and Surface-Enhanced Raman Scattering Biosensor

Graphene is a single-atom-thick two-dimensional carbon nanosheet with outstanding chemical, electrical, material, optical, and physical properties due to its large surface area, high electron mobility, thermal conductivity, and stability. These extraordinary features of graphene make it a key component for different applications in the biosensing and imaging arena. However, the use of graphene alone is correlated with certain limitations, such as irreversible self-agglomerations, less colloidal stability, poor reliability/repeatability, and non-specificity. The addition of gold nanostructures (AuNS) with graphene produces the graphene-AuNS hybrid nanocomposite which minimizes the limitations as well as providing additional synergistic properties, that is, higher effective surface area, catalytic activity, electrical conductivity, water solubility, and biocompatibility. This review focuses on the fundamental features of graphene, the multidimensional synthesis, and multipurpose applications of graphene-Au nanocomposites. The paper highlights the graphene-gold nanoparticle (AuNP) as the platform substrate for the fabrication of electrochemical and surface-enhanced Raman scattering (SERS)-based biosensors in diverse applications as well as SERS-directed bio-imaging, which is considered as an emerging sector for monitoring stem cell differentiation, and detection and treatment of cancer.

Development and comparative investigation of Ag-sensitive layer based SAW and QCM sensors for mercury sensing applications

Here, we developed Ag sensitive layer-based surface acoustic wave (SAW) and quartz crystal microbalance (QCM) sensors and focused on their comparative analysis for Hg sensing applications.

Dependence of photocatalysis on charge carrier separation in Ag-doped and decorated TiO2nanocomposites

Ag–TiO₂nanocomposite systems have been investigated with the aim of understanding the relationship between the photocatalytic efficiency and the contributions of various structures resulting in charge carrier separation, charge transfer and extension of light absorption to the visible range.

Highly Sensitive, Uniform, and Reusable Surface-Enhanced Raman Scattering Substrate with TiO₂ Interlayer between Ag Nanoparticles and Reduced Graphene Oxide

TiO2 nanoparticles and Ag nanoparticles were successively deposited on reduced graphene oxide (rGO) by a two-step solvothermal process to develop a reusable surface-enhanced Raman scattering (SERS) substrate with high sensitivity and uniformity owing to the 2-dimensional planar structure of rGO, the photocatalytic activity of TiO2, and the SERS function of Ag nanoparticles. The presence of TiO2 interlayer efficiently diminished the interference from the Raman intensities of D-band and G-band of rGO and hence enhanced the sensitivity significantly. As compared to Ag/rGO nanocomposite, the detection limit of 4-aminothiophenol (4-ATP) for Ag/TiO2/rGO nanocomposite could be lowered from 10(-10) to 10(-14) M, and its enhancement factor could be raised from 1.27 × 10(10) to 3.46 × 10(12). Meanwhile, good uniformity remained, the relative standard deviation (RSD) value was about 10%. Furthermore, by UV irradiation in water, the photocatalytic property of TiO2 could eliminate the Raman signal of 4-ATP efficiently and made this substrate reusable. After being reused five times, its excellent SERS performance was still retained. Thus, the Ag/TiO2/rGO nanocomposite developed in this work was a promising SERS substrate with good reusability and high sensitivity and uniformity.

Controlling core/shell formation of Nanocubic p-Cu2O/n-ZnO toward enhanced photocatalytic performance

p-Type Cu2O/n-type ZnO core/shell photocatalysts has been demonstrated to be an efficient photocatalyst as a result of their interfacial structure tendency to reduce the recombination rate of photogenerated electron-hole pairs. Monodispersed Cu2O nanocubes were synthesized and functioned as the core, on which ZnO nanoparticles were coated as the shells having varying morphologies. The evenly distributed ZnO decoration as well as assembled nanospheres of ZnO were carried out by changing the molar concentration ratio of Zn/Cu. The results indicate that the photocatalytic performance is initially increased, owing to formation of small ZnO nanoparticles and production of efficient p-n junction heterostructures. However, with increasing Zn concentration, the decorated ZnO nanoparticles tend to form large spherical assemblies resulting in decreased photocatalytic activity due to the interparticle recombination between the agglomerated ZnO nanoparticles. Therefore, photocatalytic activity of Cu2O/ZnO heterostructures can be optimized by controlling the assembly and morphology of the ZnO shell.

Moving forward in plant food safety and security through NanoBioSensors: Adopt or adapt biomedical technologies?

Plant-based foods are integral part of our day-to-day diet. Increasing world population has put forth an ever increasing demand for plant-based foods, and food security remains a major concern. Similarly, biological, chemical, and physical threats to our food and increasing regulatory demands to control the presence of foreign species in food products have made food safety a growing issue. Nanotechnology has already established its roots in diverse disciplines. However, the food industry is yet to harness the full potential of the unique capabilities offered by this next-generation technology. While there might be safety concerns in regards to integration of nanoproducts with our food products, an aspect of nanotechnology that can make remarkable contribution to different elements of the food chain is the use of nanobiosensors and diagnostic platforms for monitoring food traceability, quality, safety, and nutritional value. This brings us to an important question that whether existing diagnostic platforms that have already been well developed for biomedical and clinical application are suitable for food industry or whether the demands of the food industry are altogether different that may not allow adoption/adaptation of the existing technology. This review is an effort to raise this important "uncomfortable" yet "timely" question.

Nanosphere monolayer on a transducer for enhanced detection of gaseous heavy metal

This study reports for the first time that polystyrene monodispersed nanosphere monolayer (PS-MNM) based Au (Au-MNM) and Ag (Ag-MNM) nanostructures deposited on quartz crystal microbalance (QCM) transducers can be used for nonoptical based chemical sensing with extremely high sensitivity and selectivity. This was demonstrated by exposing the Au-MNM and Ag-MNM based QCMs to low concentrations of Hg(0) vapor in the presence interferent gas species (i.e., H2O, NH3, volatile organics, etc.) at operating temperatures of 30 and 75 °C. At 30 °C, the Au-MNM and Ag-MNM based QCMs showed ∼16 and ∼20 times higher response magnitude toward Hg(0) vapor concentration of 3.26 mg/m(3) (364 parts per billion by volume (ppbv)) relative to their unmodified control counterparts, respectively. The results indicated that the extremely high sensitivity was not due to the increased surface area (only 4.62 times increase) but due to their long-range interspatial order and high number of surface defect formation which are selectively active toward Hg(0) vapor sorption. The Au-MNM and Ag-MNM also had more than an order of magnitude lower detection limits (<3 ppbv) toward Hg(0) vapor compared to their unmodified control counterparts (>30 ppbv). When the operating temperature was increased from 30 to 75 °C, it was found that the sensors exhibited lower drift, better accuracy, and better selectivity toward Hg(0) vapor but at the compromise of higher detection limits. The high repeatability (84%), accuracy (97%), and stability of Au-MNM in particular make it practical to potentially be used as nonspectroscopic based Hg(0) vapor sensor in many industries either as mercury emission monitoring or as part of a mercury control feedback system.

Silver/gold core/shell nanowire monolayer on a QCM microsensor for enhanced mercury detection

The formation of a silver nanowire monolayer (Ag NWML) galvanically replaced with gold (Au) directly on the electrodes of a quartz crystal microbalance (QCM) transducer for non-spectroscopic based elemental mercury (Hg⁰) vapor sensing is reported in this study.

ZnO oxide films for ultrasensitive, rapid, and label-free detection of neopterin by surface-enhanced Raman spectroscopy

Efficient and low-cost surface-enhanced Raman scattering (SERS) substrates based on Au coated zinc oxide layers for the detection of neopterin were prepared.

Selective synthesis of different ZnO/Ag nanocomposites as surface enhanced Raman scattering substrates and highly efficient photocatalytic catalysts

Different ZnO–Ag nanocomposites with controlling SERS and photocatalytic performance were obtained only by adjusting solvents.