Excellent performance of copper based metal organic framework in adsorptive removal of toxic sulfonamide antibiotics from wastewater

Exploring metal carbamates as precursors for the synthesis of metal-organic frameworks

In the synthesis of metal-organic frameworks (MOFs), the choice of the metal precursor plays a key role because of the influence that it can exert on the crystallization kinetics. The present work explores the use of metal-carbamato complexes for the synthesis of benchmark MOFs, namely HKUST-1 and UiO-66. Cu2(O2CNEt2)4·2NHEt2 and Zr(O2CNEt2)4, prepared using straightforward CO2 fixation reactions starting from the corresponding metal chlorides and diethylamine, were employed as metal precursors for MOF formation. The synthesis conditions, including the solvent, temperature, and ligand protonation degree, were systematically investigated, revealing metal carbamates as highly reactive precursors due to their prompt release of CO2 and amine upon reaction with protic species, i.e., the polycarboxylic linkers. This property of metal carbamates allowed us to identify room temperature protocols to achieve MOFs with comparable properties to those obtained using traditional metal precursors. Subsequent optimization of the reaction conditions led to the design of a one-pot synthetic strategy for HKUST-1, starting directly from copper(II) chloride and diethylamine under a CO2 atmosphere. The MOFs were characterized using various techniques, including powder X-ray diffraction, N2 sorption analysis, 1H nuclear magnetic resonance spectroscopy, and CHN elemental analysis, and compared to reference samples prepared according to literature procedures.

MnFe2O4-NH2-HKUST-1, MOF magnetic composite, as a novel sorbent for efficient dye removal: fabrication, characterization and isotherm studies

Dye in industrial wastewater is one of the most serious environmental concerns due to its potentially harmful effects on human health. Many industrial dyes are carcinogenic, toxic and teratogenic. Removal and recovery of hazardous dyes from the effluents requires efficient adsorbents. In this study, magnetic adsorbent MnFe2O4-NH2-HKUST-1 was synthesized to remove methylene blue and crystal violet dyes from aqueous solutions. The synthesized adsorbent was characterized using FTIR, XRD, BET, VSM, SEM, TGA and Zeta potential techniques. The effect of different parameters such as pH, contact time, and adsorbent dosage on the removal of dyes was investigated. The dye adsorption process was investigated by UV-Vis spectrophotometry. The maximum adsorbent capacity was obtained as 149.25 mg/g for methylene blue and 135.13 mg/g for crystal violet. The adsorption equilibrium isotherm and kinetic models were plotted and results showed that the adsorption process for both dyes is a collection of physical and chemical adsorption based on langmuir and freundlich isotherm models, and follows the pseudo-second-order adsorption kinetics. This study shows that magnetic adsorbent MnFe2O4-NH2-HKUST-1 has a good potential for removal of methylene blue and crystal violet dyes from water in a short time (5 min) and it is easily separated from the solution by a magnetic field due to its magnetic property.

A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater

Frequent detection of sulfonamides (SAs) pharmaceuticals in wastewater has necessitated the discovery of suitable technology for their sustainable remediation. Adsorption has been widely investigated due to its effectiveness, simplicity, and availability of various adsorbent materials from natural and artificial sources. This review highlighted the potentials of carbon-based adsorbents derived from agricultural wastes such as lignocellulose, biochar, activated carbon, carbon nanotubes graphene materials as well as organic polymers such as chitosan, molecularly imprinted polymers, metal, and covalent frameworks for SAs removal from wastewater. The promising features of these materials including higher porosity, rich carbon-content, robustness, good stability as well as ease of modification have been emphasized. Thus, the materials have demonstrated excellent performance towards the SAs removal, attributed to their porous nature that provided sufficient active sites for the adsorption of SAs molecules. The modification of physico-chemical features of the materials have been discussed as efficient means for enhancing their adsorption and reusable performance. The article also proposed various interactive mechanisms for the SAs adsorption. Lastly, the prospects and challenges have been highlighted to expand the knowledge gap on the application of the materials for the sustainable removal of the SAs.

An eco-friendly self-assembled catalyst preparation and study of tetracycline degradation: Performance, mechanism to application

Chloromethyl styrene resin can undergo specific chemical modifications and is an excellent adsorbent material for treating difficult-to-degrade substances in wastewater. In this study, chloromethyl styrene resin will be used as a carrier, and polystyrene chloromethyl resin (PS-Cl) was converted into PS-NH2 by amino modification. The self-assembly of cobalt-based metal-organic framework (CoMOF) was induced on the surface of PS-NH2 by using a novel preparation technique. The performance of the prepared PS-NH2@CoMOF self-assembled catalysts with core-shell-like structures in degrading the target pollutant, tetracycline (TC), was evaluated. The catalysts effectively induced rapid OH radical production from H2O2, had a degradation rate of as high as 88.3 % for 20 mg/L TC solution, and were highly stable and adaptable to aqueous environments. Free radicals and intermediates in the catalytic degradation process were detected by electron paramagnetic resonance and high-performance liquid chromatography mass spectrometry, and possible catalytic degradation pathways were analyzed. The catalytic dissociation behavior of H2O2 in the presence of different catalysts was studied in depth and compared with that of similar metal-organic framework materials through density-functional theory calculations. Results demonstrated the excellent performance of the PS-NH2@CoMOF catalysts. Finally, the catalysts' potential for use in practical engineering applications was evaluated with a flow column experimental model, and the results were more than satisfactory. Therefore, the use of the catalysts to degrade TC has great potential.

Development of hybrid MIL-53(Al)@CBS for ternary adsorption of tetracyclines antibiotics in water: Physical interpretation of the adsorption mechanism

In this study, a hybrid material, MIL-53(Al)@CBS, was synthesized via the solvothermal method, involving the growth of MIL-53(Al) crystals on cocoa bean shell residues (CBS). Physicochemical characterization techniques, including TGA, BET, FTIR, XRD, and SEM, confirmed successful hybridization. MIL-53(Al)@CBS was employed as an adsorbent for antibiotics (oxytetracycline, tetracycline, chlortetracycline) separation from aqueous solutions. Parameters like pH, adsorbent dose, concentration, time, and temperature were systematically evaluated. FTIR revealed π-π interactions and hydrogen bonds between tetracyclines and the adsorbent. MIL-53(Al)@CBS exhibited adsorption, with removal rates up to 98.92%, 99.04%, and 98.24% for OTC, TC, and CTC, respectively. Kinetics suggested adsorption depends on active site availability, with TC adsorbing fastest. Microscopic models showed adsorption on three distinct active site types with different affinities without competition or adherence to the Langmuir hypothesis. Importantly, MIL-53(Al)@CBS maintained high adsorption capacity even after ten washing cycles, highlighting its potential for water treatment.

Tailoring the Hydrophobic Interface of Core-Shell HKUST-1@Cu2O Nanocomposites for Efficiently Selective CO2 Electroreduction

The electrochemical reduction of carbon dioxide (CO2) to ethylene creates a carbon-neutral approach to converting carbon dioxide into intermittent renewable electricity. Exploring efficient electrocatalysts with potentially high ethylene selectivity is extremely desirable, but still challenging. In this report, a laboratory-designed catalyst HKUST-1@Cu2O/PTFE-1 is prepared, in which the high specific surface area of the composites with improved CO2 adsorption and the abundance of active sites contribute to the increased electrocatalytic activity. Furthermore, the hydrophobic interface constructed by the hydrophobic material polytetrafluoroethylene (PTFE) effectively inhibits the occurrence of hydrogen evolution reactions, providing a significant improvement in the efficiency of CO2 electroreduction. The distinctive structures result in the remarkable hydrocarbon fuels generation with high Faraday efficiency (FE) of 67.41%, particularly for ethylene with FE of 46.08% (-1.0 V vs RHE). The superior performance of the catalyst is verified by DFT calculation with lower Gibbs free energy of the intermediate interactions with improved proton migration and selectivity to emerge the polycarbon（C2+） product. In this work, a promising and effective strategy is presented to configure MOF-based materials with tailored hydrophobic interface, high adsorption selectivity and more exposed active sites for enhancing the efficiency of the electroreduction of CO2 to C2+ products with high added value.

Harnessing the Chemical Functionality of Metal-Organic Frameworks Toward Removal of Aqueous Pollutants

Wastewater treatment has been bestowed with a plethora of materials; among them, metal-organic frameworks (MOFs) are one such kind with exceptional properties. Besides their application in gas adsorption and storage, they are applied in many fields. In orientation toward wastewater treatment, MOFs have been and are being successfully employed to capture a variety of aqueous pollutants, including both organic and inorganic ones. This review sheds light on the postsynthetic modifications (PSMs) performed over MOFs to adsorb and degrade recalcitrant. Modifications performed on the metal nodes and the linkers have been explained with reference to some widely used chemical modifications like alkylation, amination, thiol addition, tandem modifications, and coordinate modifications. The boost in pollutant removal efficacy, reaction rate, adsorption capacity, and selectivity for the modified MOFs is highlighted. The rationale and the robustness of micromotor MOFs, i.e., MOFs with motor activity, and their potential application in the capture of toxic pollutants are also presented for readers. This review also discusses the challenges and future recommendations to be considered in performing PSM over a MOF concerning wastewater treatment.

Physiochemical characterization of metal organic framework materials: A mini review

Metal-organic frameworks (MOFs) are promising materials offering exceptional performance across a myriad of applications, attributable to their remarkable physicochemical properties such as regular porosity, crystalline structure, and tailored functional groups. Despite their potential, there is a lack of dedicated reviews that focus on key physicochemical characterizations of MOFs for the beginners and new researchers in the field. This review is written based on our expertise in the synthesis and characterization of MOFs, specifically to provide a right direction for the researcher who is a beginner in this area. In this way, experimental errors can be reduced, and wastage of time and chemicals can be avoided when new researchers conduct a study. In this article, this topic is critically analyzed, and findings and conclusions are presented. We reviewed three well-known XRD techniques, including PXRD, single crystal XRD, and SAXS, which were used for XRD analysis depending on the crystal size and the quality of crystal morphology. The TGA profile was an effective factor for evaluating the quality of the activation process and for ensuring the successful investigation for other characterizations. The BET and pore size were significantly affected by the activation process and selective benzene chain cross-linkers. FTIR is a prominent method that is used to investigate the functional groups on pore surfaces, and this method is successfully used to evaluate the activation process, characterize functionalized MOFs, and estimate their applications. The most significant methods of characterization include the X-ray diffraction, which is utilized for structural identification, and thermogravimetric analysis (TGA), which is used for exploring thermal decomposition. It is important to note that the thermal stability of MOFs is influenced by two main factors: the metal-ligand interaction and the type of functional groups attached to the organic ligand. The textural properties of the MOFs, on the other hand, can be scrutinized through nitrogen adsorption-desorption isotherms experiments at 77 K. However, for smaller pore size, the Argon adsorption-desorption isotherm at 87.3 K is preferred. Furthermore, the CO2 adsorption isotherm at 273 K can be used to measure ultra-micropore sizes and sizes lower than these, which cannot be measured by using the N2 adsorption-desorption isotherm at 77 K. The highest BET was observed in high-valence MOFs that are constructed based on the metal-oxo cluster, which has an excellent ability to control their textural properties. It was found that the synthesis procedure (including the choice of solvent, cross-linker, secondary metal, surface functional groups, and temperature), activation method, and pressure significantly impact the surface area of the MOF and, by extension, its structural integrity. Additionally, Fourier-transform infrared spectroscopy plays a crucial role in identifying active MOF functional groups. Understanding these physicochemical properties and utilizing relevant characterization techniques will enable more precise MOF selection for specific applications.

Cellulose-based adsorbents for solid phase extraction and recovery of pharmaceutical residues from water

Cellulose has attracted interest from researchers both in academic and industrial sectors due to its unique structural and physicochemical properties. The ease of surface modification of cellulose by the integration of nanomaterials, magnetic components, metal organic frameworks and polymers has made them a promising adsorbent for solid phase extraction of emerging contaminants, including pharmaceutical residues. This review summarizes, compares, and contrasts different types of cellulose-based adsorbents along with their applications in adsorption, extraction and pre-concentration of pharmaceutical residues in water for subsequent analysis. In addition, a comparison in efficiency of cellulose-based adsorbents and other types of adsorbents that have been used for the extraction of pharmaceuticals in water is presented. From our observation, cellulose-based materials have principally been investigated for the adsorption of pharmaceuticals in water. However, this review aims to shift the focus of researchers to the application of these adsorbents in the effective pre-concentration of pharmaceutical pollutants from water at trace concentrations, for quantification. At the end of the review, the challenges and future perspectives regarding cellulose-based adsorbents are discussed, thus providing an in-depth overview of the current state of the art in cellulose hybrid adsorbents for extraction of pharmaceuticals from water. This is expected to inspire the development of solid phase exraction materials that are efficient, relatively cheap, and prepared in a sustainable way.

High-Efficiency Adsorption of Cr(VI) and Mn(VII) from Wastewater by a Two-Dimensional Copper-Based Metal-Organic Framework

Cr(VI) and Mn(VII) in industrial wastewater have certain toxicity, and they pose a threat to the environment and human health and safety. Metal-organic frameworks (MOFs) usually have rich adsorption sites and a large specific surface area. They can effectively adsorb Cr(VI) and Mn(VII) from wastewater. In this paper, a two-dimensional copper-based metal-organic framework, {[Cu·(4,4'-bpy)2·(H2O)]·2(NO3)·6(H2O)·(CH3OH)}n (1), is synthesized by hydrothermal synthesis. The structure of 1 is characterized by Fourier transform infrared (IR) spectroscopy, single-crystal X-ray diffraction, element analysis, and X-ray photoelectron spectroscopy (XPS). The results showed that 1 had a two-dimensional network structure, and the specific surface area of the nanostructure was 67.63 m2/g. The nanostructure of 1 could efficiently adsorb Cr(VI) and Mn(VII) from wastewater. The adsorption properties of Cr(VI) and Mn (VII) of 1 showed that the optimal concentration of both adsorbents was 0.2 g/L. It has good adsorption performance in the pH range 4-8. The adsorption performance is the best when pH is 7, which can reach 145 and 83 mg/g, respectively.

The adsorption property of in-situ synthesis of MOF in alginate gel for ofloxacin in the wastewater

Although metal-organic frameworks (MOFs) are advantageous to the removal of organic pollutants, the general MOFs in powder form is disadvantageous to their practical applications. In-situ MOF synthesis in alginate gel is a good way to fabricate an MOF composite for many applications, which is different from blending MOF particles with polymers. In-situ synthesis of Zeolitic Imidazolate Framework-8 (ZIF-8) in alginate gel is in the form of beads with rough wrinkles and has many pores inside. When used as an absorbent, in-situ synthesis of ZIF-8 in alginate gel could remove 97.7 ± 0.9% of ofloxacin from ofloxacin solution and the equilibrium adsorption capacity is up to 160.6 ± 1.3 mg/g. During the adsorption, ofloxacin is first brought into the gel by the solvent exchange and gel microchannel adsorption, and it can then be absorbed by in-situ ZIF-8. Moreover, the adsorption efficiency can reach 85.5% even after four cycles of adsorption. We believe that in-situ synthesis of ZIF-8 in alginate gel will be an appropriate material for the removal of ofloxacin in the wastewater.

Sensitivity enhancement of a Cu (II) metal organic framework-acetylene black-based electrochemical sensor for ultrasensitive detection of imatinib in clinical samples

Imatinib (IMB), an anticancer drug, is extensively used for chemotherapy to improve the quality of life of cancer patients. The aim of therapeutic drug monitoring (TDM) is to guide and evaluate the medicinal therapy, and then optimize the clinical effect of individual dosing regimens. In this work, a highly sensitive and selective electrochemical sensor based on glassy carbon electrode (GCE) modified with acetylene black (AB) and a Cu (II) metal organic framework (CuMOF) was developed to measure the concentration of IMB. CuMOF with preferable adsorbability and AB with excellent electrical conductivity functioned cooperatively to enhance the analytical determination of IMB. The modified electrodes were characterized using X-rays diffraction (XRD), X-ray photoelectron spectroscopy (XPS), fourier transform infrared (FT-IR), ultraviolet and visible spectrophotometry (UV-vis), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), brunauer‒emmett‒teller (BET) and barrett‒joyner‒halenda (BJH) techniques. Analytical parameters such as the ratio of CuMOF to AB, dropping volumes, pH, scanning rate and accumulation time were investigated through cyclic voltammetry (CV). Under optimal conditions, the sensor exhibited an excellent electrocatalytic response for IMB detection, and two linear detection ranges were obatined of 2.5 nM-1.0 μM and 1.0-6.0 μM with a detection limit (DL) of 1.7 nM (S/N = 3). Finally, the good electroanalytical ability of CuMOF-AB/GCE sensor facilitated the successful determination of IMB in human serum samples. Due to its acceptable selectivity, repeatability and long-term stability, this sensor shows promising application prospects in the detection of IMB in clinical samples.

Different strengthening effects of amino and nitro groups on the bisphenol A adsorption of an aluminum metal-organic framework in aqueous solution

In recent years, metal-organic frameworks (MOFs) have been employed in numerous applications for adsorption. Researchers synthesize new MOFs by various methods, including the introduction of functional groups. In this study, three different aluminum-based MOFs (with non-functionalized, amino-functionalized, nitro-functionalized) were produced by hydrothermal synthesis and used for investigating typical endocrine disrupting chemicals (EDCs), namely for bisphenol A (BPA) adsorption. We used several methods to characterize the MOFs and conducted batch adsorption experiments to investigate their adsorption properties, and explore the influence of different functional groups on adsorption materials. The specific surface area of Al-MOF-NH₂ is 6 times larger than that of Al-MOF according to the N₂ adsorption and desorption isotherms of the material, that is, the BET of Al-MOF, Al-MOF-NH₂, and Al-MOF-NO₂ were 109.68, 644.03, and 146.60 m²/g. Note that although the same synthesis method is used, pore size is greatly changed because of the different functional groups. Al-MOF and Al-MOF-NO₂ have more mesopores, and Al-MOF-NH₂ is mainly microporous. The BPA adsorption capacities of Al-MOF, Al-MOF-NH₂, and Al-MOF-NO₂ were 46.43, 227.78, and 155.84 mg/L. The outcomes can also be explained by the improved adsorption performance from the addition of amino functional groups. In this research, the adsorption isotherms and adsorption kinetics of the three Al-MOFs for BPA were also investigated to explain the different adsorption properties of various functional groups. The results show that the amino-functionalized materials have remarkable characterization morphologies, uniform particle distributions, appropriate particle sizes, excellent specific surface areas, and superior adsorption effects.

Synthesis of g-C3N4 Derived from Different Precursors for Photodegradation of Sulfamethazine under Visible Light

In this study, a series of g-C3N4 nanosheets were prepared by various thermal oxidative etching times from four different precursors (urea, melamine, dicyandiamide and thiourea). The physicochemical properties of these g-C3N4 nanosheets were analyzed in detail using scanning electron microscopy (SEM), X-ray diffraction (XRD), photoluminescence emission spectra, Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) analysis and ultraviolet-visible diffuse reflectance. The results revealed that the g-C3N4 nanosheets obtained a thinner layer thickness and larger specific surface area, with an extension of thermal oxidative etching time. Meanwhile, sulfamethazine (SMZ), one of the most widely used sulfonamides, was used to evaluate the photocatalyst activity of the g-C3N4 nanosheets prepared in this study. Compared to other g-C3N4 nanosheets, urea-derived g-C3N4 nanosheets under 330 min thermal oxidative etching showed the highest photocatalytic activity for SMZ under visible light. In conclusion, our study provides detailed insights into the synthesis and characterization of g-C3N4 nanosheets prepared from various precursors and highlights the importance of thermal oxidative etching time in determining the photocatalytic activity of these materials.

(Multivariate)-Metal-Organic Framework for Highly Efficient Antibiotic Capture from Aquatic Environmental Matrices

Contamination of aquatic environments by pharmaceuticals used by modern societies has become a serious threat to human beings. Among them, antibiotics are of particular concern due to the risk of creating drug-resistant bacteria and, thus, developing efficient protocols for the capture of this particular type of drug is mandatory. Herein, we report a family of three isoreticular MOFs, derived from natural amino acids, that exhibit high efficiency in the removal of a mixture of four distinct families of antibiotics, such as fluoroquinolones, penicillins, lincomycins, and cephalosporins, as solid-phase extraction (SPE) sorbents. In particular, a multivariate (MTV)-MOF, prepared using equal percentages of amino acids l-serine and l-methionine, also exhibits outstanding recyclability, surpassing the benchmark material activated carbon. The good removal performance of the MTV-MOF was rationalized by means of single-crystal X-ray diffraction. These results highlight the situation of MOFs as a real and promising alternative for the capture of antibiotics from environmental matrices, especially wastewater streams.

Enhanced Visible-Light-Responsive Photocatalytic Degradation of Ciprofloxacin by the CuxO/Metal-Organic Framework Hybrid Nanocomposite

Ciprofloxacin (CIP) is a commonly used antibiotic, however, once in the environment, it is highly toxic with a poor biodegradability. Given these attributes, an effective strategy for the removal of CIP is urgently needed for the protection of water resources. Herein, a novel copper metal-organic framework (CuxO/MOF) multifunctional material has been produced, in this work, by the calcination of Cu-MOF urea at 300 °C, in the presence of a 5% H2 atmosphere. The morphological, structural, and thermal properties of the prepared CuxO/MOF were determined through various techniques, and its photocatalytic behavior was investigated for the degradation of CIP under visible-light irradiation. The prepared CuxO/MOF bifunctional material is presented as a graphitic carbon-layered structure with a particle size of 9.2 ± 2.1 nm. The existence of CuO-Cu2O-C, which was found on the CuxO/MOF surface, enhanced the adsorption efficiency and increased the photosensitivity of CuxO/MOF, towards the degradation of CIP in aqueous solutions. The tailored CuxO/MOF, not only shows an excellent CIP degradation efficiency of up to 92% with a constant kinetic rate (kobs) of 0.048 min−1 under visible light, but it can also retain the stable photodegradation efficiency of >85%, for at least six cycles. In addition, CuxO/MOF has an excellent adsorption capacity at pH 6.0 of the maximum Langmuir adsorption capacity of 34.5 mg g−1 for CIP. The results obtained in this study demonstrate that CuxO/MOF is a reliable integrated material and serves as an adsorbent and photocatalyst, which can open a new pathway for the preparation of visible-light-responsive photocatalysts, for the removal of antibiotics and other emerging pollutants.

Efficient and Reusable Sorbents Based on Nanostructured BN Coatings for Water Treatment from Antibiotics

Increasing contamination of wastewater with antibiotics used in agriculture, animal husbandry, and medicine is a serious problem for all living things. To address this important issue, we have developed an efficient platform based on a high specific surface area hexagonal boron nitride (BN) coating formed by numerous nanopetals and nanoneedles. The maximum sorption capacity of 1 × 1 cm² BN coatings is 502.78 µg/g (tetracycline, TET), 315.75 µg/g (ciprofloxacin, CIP), 400.17 µg/g (amoxicillin, AMOX), and 269.7 µg/g (amphotericin B, AMP), which exceeds the sorption capacity of many known materials. Unlike nanoparticles, BN-coated Si wafers are easy to place in and remove from antibiotic-contaminated aqueous solutions, and are easy to clean. When reusing the adsorbents, 100% efficiency was observed at the same time intervals as in the first cleaning cycle: 7 days (TET) and 14 days (CIP, AMOX, AMP) at 10 µg/mL, 14 days (TET, CIP, and AMOX) and 28 days (AMP) at 50 µg/mL, and 14 days (TET) and 28 days (CIP, AMOX and AMP) at 100 µg/mL. The results obtained showed that TET and CIP are best adsorbed on the surface of BN, so TET was chosen as an example for further theoretical modeling of the sorption process. It was found that adsorption is the main mechanism, and this process is spontaneous and endothermic. This highlights the importance of a high specific surface area for the efficient removal of antibiotics from aqueous solutions.

Synthesis of novel Fe0-Fe3O4/CeO2/C composite cathode for efficient heterogeneous electro-Fenton degradation of ceftriaxone sodium

Fe⁰-Fe₃O₄ nanoparticles and cerium dioxide hollow spheres as efficient heterogeneous electro-Fenton reagents were rationally designed to be embedded in porous carbon derived from skimmed cotton for the electrocatalytic degradation of ceftriaxone sodium. Skimmed cotton porous carbon material has a hollow tubular structure, and cerium dioxide is dispersed on the surface of the carbon material in a hollow sphere structure of uniform size. Fe⁰-Fe₃O₄ nanoparticles were wrapped in irregular particle shapes on the surface of cerium dioxide hollow spheres, and the remaining part was laid flat on the surface of porous carbon material. The as-synthesized Fe⁰-Fe₃O₄/CeO₂/C showed excellent degradation efficiency of 95.59 % for ceftriaxone sodium within 120 mins and obtained a COD removal rate of 95.21 % at 240 mins. The zero-valent iron as a reducing agent effectively accelerated the Fe³⁺/Fe²⁺ cycle, allowing the composites to exhibit higher catalytic activity and further reducing the possibility of secondary contamination. Moreover, the existence of cerium dioxide further promoted the redox cycle of Ce⁴⁺/Ce³⁺ and accelerated the electron transfer in the interface of the catalyst. The synergistic effect of iron and cerium greatly facilitated the production of hydroxyl radicals and increased the yield of hydroxyl radicals in the reaction system.

Enhanced adsorption performance of UiO-66 via modification with functional groups and integration into hydrogels

University of Oslo-66 (UiO-66) was a potential adsorbent for removing various pollutants from wastewater. Modifying the UiO-66 surface with different functional groups could enhance the adsorption performance. In this study, the UiO-66 modified with a functional group of -NH₂ or -NO₂ was prepared and tested to adsorb different pollutants. The results showed that -NO₂ modified UiO-66 increased the adsorption capacity of tetracycline by 17 times to 94.08 mg g^-1 compared with unmodified UiO-66. The adsorption process of UiO-66-NO₂ followed the pseudo-second-order adsorption kinetic model and Langmuir isotherm model with a maximum isotherm adsorption capacity of 127.32 mg g^-1. The adsorption interaction was hydrogen bonding and electrostatic attraction. The UiO-66-NO₂ also showed good adsorption performance to Co²⁺, Methylene blue, Congo red. Fixing UiO-66-NO₂ into hydrogel performed a stable absorption performance with a high absorption capacity (71.56 mg g^-1) to TC and a good regeneration rate (85%) after five cycles, providing a novel applicable way to remove pollutants from wastewater.

Activation of persulfate by a water falling film DBD process for the enhancement of enrofloxacin degradation

A synergetic system of water falling film dielectric barrier discharge (DBD) plasma and persulfate (PS) was established and applied to enhance the enrofloxacin (EFA) degradation in this study. The simultaneous existence of electrons, reactive species, heat and UV-visible light in the DBD plasma system were utilized together to activate the PS to form SO₄^-· and other reactive oxygen species (ROS), and then worked in synergy with the DBD plasma to oxidize the EFA. The obtained results verified that there was a significant increase in the degradation percentages of EFA (20 mg L^-1) in the DBD/PS system, and the trend was more obvious under the condition of larger discharge power input. When 0.8 mM PS was added into the DBD system with 0.8 kW discharge power, the degradation percentage of EFA could reach 99.35% after 60 min treatment, the corresponding synergetic factor (SF) was 7.94. Analysis of the O₃ and the H₂O₂ concentrations in the DBD plasma system before and after the PS addition explained the activation of the PS by the HO·. The quenching experiments on reactive species suggested that SO4^-·, HO·, and ¹O₂ were all important reactive species for EFA degradation. The intermediates formed by the EFA degradation were detected and the degradation pathways were speculated. Results of toxicity analysis illustrated that the toxicity of the initial EFA solution decreased after degradation in the synergetic system of DBD/PS.

Sustainable adsorbents for the removal of pharmaceuticals from wastewater: A review

Over the previous three decades, the worldwide use of pharmaceuticals has surged by more than 2.5 times. Although being considered essential to save many lives, pharmaceuticals have also emerged as a large source of complex environmental contaminants in recent decades. Consequently, the pharmaceuticals and their breakdown products are ending up into the water bodies thus progressively contaminating them and the surrounding environments. Based on recent studies concentrations in water sources are typically >0.1 μg/l and the concentration in treated water is typically >0.05 μg/l. These pharma drugs are removed from aquatic systems by processes such as oxidation, Ultraviolet degradation, reverse osmosis and nano-filtration. However, hazardous sludge creation, incomplete removal, expensive capital and operating costs, and the need for professional operating and maintenance personnel have all limited the economic sustainability of these systems. As a result, the presence of pharmaceuticals in water necessitates even more advanced technologies of purification to harvest clean water, yet present approaches are constrained by their high costs, low reusability, and disposal issues. Here, we review sustainable adsorbents for the removal of pharmaceuticals from wastewater. In this comprehensive review, an evaluation of water contamination caused by pharmaceutical compounds is discussed. An overview of current research on the employment of sustainable adsorbents for the removal of the major pharmaceuticals prevalent in water sources. Numerous aspects of high adsorption efficiencies of these pharmaceutical compounds with such sustainable adsorbents were observed; however, other factors, such as adsorbent regeneration and cost evaluation, must be taken into account in order to assess the true applicability of adsorbents.

Hollow Nanospheres Organized by Ultra-Small CuFe2O4/C Subunits with Efficient Photo-Fenton-like Performance for Antibiotic Degradation and Cr(VI) Reduction

Hollow transition metal oxides have important applications in the degradation of organic pollutants by a photo-Fenton-like process. Herein, uniform, highly dispersible hollow CuFe2O4/C nanospheres (denoted as CFO/C-PNSs) were prepared by a one-pot approach. Scanning electron microscope (SEM) and transmission electron microscope (TEM) images verified that the CFO/C-PNS catalyst mainly presents hollow nanosphere morphology with a diameter of 250 ± 30 nm. Surprisingly, the photodegradation test results revealed that CFO/C-PNSs had an excellent photocatalytic performance in the elimination of various organic contaminants under visible light through the efficient Fenton catalytic process. Due to the unique hollow structure formed by the assembly of ultra-small CFO/C subunits, the catalyst exposes more reaction sites, improving its photocatalytic activity. More importantly, the resulting magnetically separable CFO/C-PNSs exhibited excellent stability. Finally, the possible photocatalytic reaction mechanism of the CFO/C-PNSs was proposed, which enables us to have a clearer understanding of the photo-Fenton mechanism. Through a series of characterization and analysis of degradation behavior of CFO/C-PNS samples over antibiotic degradation and Cr(VI) reduction, •OH radicals generated from H2O2 decomposition played an essential role in enhancing the reaction efficiency. The present work offered a convenient method to fabricate hollow transition metal oxides, which provided impetus for further development in environmental and energy applications. Highlights: Novel hollow CuFe2O4/C nanospheres were prepared by a facile and cost-effective method. CuFe2O4/C exhibited excellent photo-Fenton-like performance for antibiotic degradation. Outstanding photocatalytic performance was attributed to the specific hollow cavity-porous structure. A possible mechanism for H2O2 activation over hollow CuFe2O4/C nanospheres was detailed and discussed.

New Polymeric Adsorbents Functionalized with Aminobenzoic Groups for the Removal of Residual Antibiotics

In this paper, we present the synthesis of new polymeric adsorbents derived from macroporous chloromethylated styrene–divinylbenzene (DVB) copolymers with different cross-linking degrees functionalized with the following aminobenzoic groups: styrene—6.7% DVB (PAB1), styrene—10% DVB (PAB2), and styrene—15% DVB (PAB3). The new polymeric products, PAB1, PAB2, and PAB3, were characterized by FTIR spectroscopy, thermogravimetric analysis, and EDX, SEM, and BET analysis, respectively. The evolution of the functionalization reaction was followed by FTIR spectroscopy, which revealed a decrease in the intensity of the γCH₂Cl band at 1260 cm⁻¹, and, simultaneously, the appearance of C=O carboxylic bands from 1685–1695 cm⁻¹ and at 1748 cm⁻¹. The thermal stability increased with the increase in the cross-linking degree. The data obtained from the EDX analysis of the novel cross-linked copolymers confirmed the functionalization with aminobenzoic groups through the presence and content of nitrogen, as follows: PAB1: N% = 0.47; PAB2: N% = 0.85; and PAB3: N% = 1.30. The adsorption performances of the novel polymeric adsorbents, PAB1, PAB2, and PAB3, were tested in the adsorption of three antibiotics, tetracycline, sulfamethoxazole, and amoxicillin, from aqueous solutions, by using extensive kinetic, equilibrium, and thermodynamic studies. The best adsorption capacity was demonstrated by the tetracycline. Amoxicillin adsorption was also attempted, but it did not show positive results.

HKUST-1 derived carbon adsorbents for tetracycline removal with excellent adsorption performance

As the abuse of antibiotics has led to increasingly serious environmental pollution problems, studies have found that the adsorption method can be used to efficiently and quickly remove residual antibiotics in water with low cost and high efficiency. Metal-organic frameworks and their derived porous carbons have received widespread attention as a new type of adsorption material. In this study, HKUST-1 was synthesized by a hydrothermal method and carbonized to HDC-350 at 350 °C under an oxygen-free atmosphere. Through adsorption experiments, HDC-350 is found to show a superior adsorption effect for tetracycline (TC), with an adsorption capacity that reaches 136.88 mg g^-1. The TC adsorption mechanism was studied through characterization and analysis of HDC-350. The adsorption of TC by HDC-350 mainly relies on electrostatic attraction, hydrogen bonding, metal-organic complexation, and intermolecular interactions. This study shows that HKUST-1-derived porous carbon can be used to improve the water stability of HKUST-1, and, at the same time, can effectively adsorb TC in solution, which provides good conditions for practical research applications in the future.

Sustainable green nanoadsorbents for remediation of pharmaceuticals from water and wastewater: A critical review

In the last three decades, pharmaceutical research has increased tremendously to offer safe and healthy life. However, the high consumption of these harmful drugs has risen devastating impact on ecosystems. Therefore, it is worldwide paramount concern to effectively clean pharmaceuticals contaminated water streams to ensure safer environment and healthier life. Nanotechnology enables to produce new, high-technical material, such as membranes, adsorbent, nano-catalysts, functional surfaces, coverages and reagents for more effective water and wastewater cleanup processes. Nevertheless, nano-sorbent materials are regarded the most appropriate treatment technology for water and wastewater because of their facile application and a large number of adsorbents. Several conventional techniques have been operational for domestic wastewater treatment but are inefficient for pharmaceuticals removal. Alternatively, adsorption techniques have played a pivotal role in water and wastewater treatment for a long, but their rise in attraction is proportional with the continuous emergence of new micropollutants in the aquatic environment and new discoveries of sustainable and low-cost adsorbents. Recently, advancements in adsorption technique for wastewater treatment through nanoadsorbents has greatly increased due to its low production cost, sustainability, better physicochemical properties and high removal performance for pharmaceuticals. Herein, this review critically evaluates the performance of sustainable green nanoadsorbent for the remediation of pharmaceutical pollutants from water. The influential sorption parameters and interaction mechanism are also discussed. Moreover, the future prospects of nanoadsorbents for the remediation of pharmaceuticals are also presented.

Highly efficient removal of quinolones by using the easily reusable MOF derived-carbon

As anthropogenic antibiotics, quinolones, e.g., ofloxacin have adverse impacts on ecological systems and human heaths. The removal of quinolones is of great importance, and adsorption techniques have been widely used to remove this hazardous contaminant. However, a robust and easy-operating adsorbent is still emergently required due to the complex chemical structure of quinolones. In this study, we successfully synthesized the promising metallic carbons (MCs) containing carbon nanotubes and cobalt nanoparticles by carbonizing Zn/Co-ZIF at 900 °C. Three different molar ratios of Co and Zn were applied to optimize the adsorption capacity on ofloxacin (OFL). Results showed MC with molar ratio of Co and Zn at 3:1 (Co-CNT/NPC_3/1) achieved the maximal adsorption capacity to 118.3 mg g^-1. Its adsorption performance was satisfied in the pH range from 5 to 9 and ionic strengths at 0.01 M. The main mechanisms for these adsorptions were identified as electrostatic attraction, metal coordination and π-π EDA. Removal efficiencies of quinolones higher than 68 mg g^-1 indicated the strong feasibility of this adsorbent for wastewater treatments. The regeneration of Co-CNT/NPC_3/1 at 600 °C allowed its at least 4-time reusability and its magnetic property enabled external magnets to recycle it from real environments.

Quick removal of metronidazole from aqueous solutions using metal–organic frameworks

Two MOFs were assembled, characterized and investigated in detail as efficient adsorbents for removal of the metronidazole antibiotic. Adsorption isotherms and kinetic features were also studied.

Understanding the factors affecting adsorption of pharmaceuticals on different adsorbents - A critical literature update

Remediation of emerging pharmaceutically active compounds (PhACs) as micropollutants in wastewater is of foremost importance as they can cause extremely detrimental effects on life upon bioaccumulation and generation of drug-resistance microorganisms. Presently used physicochemical treatments, such as electrochemical oxidation, nanofiltration and reverse osmosis, are not feasible owing to high operating costs, incomplete removal of contaminants along with toxic by-products formation. Adsorption with the utilization of facile and efficient nanoparticulate adsorbents having distinctive properties of high surface area, excellent adsorption capacity, ability to undergo surface engineering and good regeneration displays great potential in this aspect along with the incorporation of nanotechnology for effective treatment. The application of such nanosorbents provides optimal performance under a wide range of physicochemical conditions, decreased secondary pollution with reduced mechanical stress along with excellent organic compound sequestration capacity, which in turn improves the quality of potable water in a sustainable way compared to current treatments. The present review intends to consolidate the range of factors that affect the process of adsorption of different PhACs on to various nanosorbents and also highlights the adsorption mechanism aiding in the retrieval.

The Effectiveness of MOFs for the Removal of Pharmaceuticals from Aquatic Environments: A Review Focused on Antibiotics Removal

There is an increasing level of various pollutants and their persistence in aquatic environments. The improper use of antibiotics and their inefficient metabolism in organisms result in their release into aquatic environments. Antibiotic abuse has led to hazardous effects on human health. Thereby, efficient removal of pharmaceuticals, particularly antibiotics, from wastewater and contaminated water bodies is greatly interested in international research communities. Metal-organic framework (MOF) materials, as a hybrid group of material containing metallic center and organic linkers, offer a porous structure that is highly efficient for removing different pollutants from contaminated water and wastewater streams. This article aims to review the recent advancement in using MOF-based adsorbents and catalysts for the removal of pharmaceuticals, especially antibiotics, from polluted water. Applying MOFs-based structures for removing antibiotics using photocatalytic removal and adsorptive removal techniques will be discussed and evaluated in this review paper. Various MOF-based materials such as functionalized MOFs, MOF-based composites, magnetic MOF-based composites, MOFs templated-metal oxide catalysts for removing pharmaceuticals, personal care products, and antibiotics from contaminated aqueous media are discussed. Furthermore, effective operational parameters on the adsorption, adsorption mechanisms, adsorption isotherms, and thermodynamic parameters are explained and discussed. Finally, in the concluding remarks, the challenges and future outlooks of using MOFs-based adsorbents and catalysts for removing antibiotics are summarized.

Removal of organic pollutants from aqueous solution using metal organic frameworks (MOFs)-based adsorbents: A review

The development of metal organic frameworks (MOFs) has recently drawn a lot of scientific interest in water treatment due to the unique properties such as tunable porosities, large pore volumes, hierarchical structures, excellent adsorption and regeneration performances. MOFs represent an eco-friendly alternative to conventional adsorbents especially for the adsorptive removal of noxious organic pollutants from aqueous solution. Advanced MOFs' performances are justified by the introduction of functional groups, magnetic moieties, and specific foreign materials onto MOFs. This however leads to increase in the manufacturing costs of MOFs and consequently possess a huge challenge in large-scale applications. This review hence critically discusses the recent progresses in the development of MOFs-based adsorbents for the removal of selected organic pollutants (e.g., dyes, antibiotics and pesticides) from aqueous solution. Furthermore, major interaction mechanisms between MOFs and organic pollutants in response to numerous experimental conditions, such as pH, temperature, coexisting ions are put forward. Finally, some recommendations in support for designing MOFs with improved adsorption performances are also highlighted.

Magnetic porous biochar as a renewable and highly effective adsorbent for the removal of tetracycline hydrochloride in water

In this study, discarded cigarette butts were used as a precursor for preparing magnetic porous biochar with a facile annealing method. The magnetic porous biochar was applied to remove tetracycline hydrochloride (TCH) from aqueous solution. It exhibited excellent adsorption capacity for TCH, which was much higher than various similar materials reported. At the same time, the adsorption kinetics and adsorption isotherms of TCH were well fitted to the pseudo-second-order models and Freundlich models, respectively. The thermodynamics experiments proved that the adsorption on magnetic porous biochar was an endothermic reaction. Furthermore, the adsorption mechanism was explored, and the outstanding adsorption ability was mainly dependent on the pore filling effect, electrostatic interaction, and π-π interaction. By using the magnetic porous biochar, the real water samples were treated and high removal efficiency to TCH was obtained. What's more, the excellent reusability endowed the magnetic porous biochar with great potential as adsorbents for practical application.

Defect Engineering in Metal‒Organic Frameworks as Futuristic Options for Purification of Pollutants in an Aqueous Environment

Clean water scarcity is becoming an increasingly important worldwide issue. The water treatment industry is demanding the development of novel effective materials. Defect engineering in nanoparticles is among the most revolutionary of technologies. Because of their high surface area, structural diversity, and tailorable ability, Metal‒Organic Frameworks (MOFs) can be used for a variety of purposes including separation, storage, sensing, drug delivery, and many other issues. The application in wastewater treatment associated with water stable MOF‒based materials has been an emerging research topic in recent decades. Defect engineering is a sophisticated technique used to manufacture defects and to change the geometric framework of target compounds. Since MOFs have a series of designable structures and active sites, tailoring properties in MOFs by defect engineering is a novel concept. Defect engineering can excavate hidden active sites in MOFs, which can lead to better performance in many fields. Therefore, this technology will open new opportunities in water purification processes. However, there has been little effort to comprehensively discuss this topic. In this review, we provide an overview of the development of defect engineered MOFs for water purification processes. Furthermore, we discuss the potential applications of defect engineered materials.

Fe3O4@PAA@UiO-66-NH2 magnetic nanocomposite for selective adsorption of Quercetin

In the present study, a magnetic core-shell metal-organic framework (Fe₃O₄@PAA@UiO-66-NH₂) nanocomposite was synthesized by a facile step-by-step self-assembly technique and used for selective adsorption of the anti-cancer Quercetin (QCT) drug. The synthesized nanocomposite was well characterized using FTIR, XRD, BET, FESEM, and TEM techniques. The adsorption kinetics and isotherms of the magnetic nanocomposites for QCT were investigated in detail at different initial concentrations and temperatures. It was found that the experimental adsorption kinetic and isotherm data were precisely explained by the pseudo-second-order kinetic and Langmuir isotherm models. Moreover, the selective adsorption ability of the synthesized nanocomposite against various drugs in the single, binary, and ternary solutions containing QCT, Curcumin (CUR), and Methotrexate (MTX) drugs was also studied. The synthesized adsorbent showed good adsorption selectivity for QCT against CUR and MTX. The adsorption mechanism of QCT on the nanocomposite might be related to the hydrogen bonding and hydrophobic-hydrophobic interactions via π-π stacking interactions between the benzene ring skeleton of QCT and the aromatic structure of the adsorbent nanoparticles. The regeneration and reusability studies demonstrated that the developed adsorbent sustained good structural stability and adequate adsorption capacity for QCT after ten consecutive adsorption-desorption cycles.

Hydrolytically Stable and Trifunctional Zirconium-Based Organic Frameworks toward Cr2O72- Detection, Capture, and Photoreduction

Chromium Cr(VI) is frequently used in many fields and has been intensively researched for detection and/or removal from contaminated water. However, the existing approaches are still of low efficiency, high cost, and cumbersome in operation. It is thus highly imperative to hunt for alternative avenues to get out of the predicament. In this work, two bcu topological and highly stable zirconium-metal-organic frameworks (Zr-MOFs) of 1 and 2 have been deliberately prepared, displaying channel-type interior spaces replete with free bipyridine/biquinoline matrices and Zr-O defect sites. Because of their unique intrinsic features of high porosity and photosensitivity, 1 and 2 were deployed as versatile platforms to sense, adsorb, and catalytically reduce Cr(VI) ions. Indeed, the Zr-MOF of 1 performs excellently in fluorescence sensing and adsorption trapping of Cr(VI), with an ultralow detection limit of 0.0176 ppm and a fairly high saturated adsorption capacity of 145.77 mg/g, while 2 is more powerful than 1 in photochemical removal of Cr(VI), exhibiting a remarkable reduction efficiency of 98.05% just within 70 min and still up to 92.21% even after five consecutive photocatalytic cycles. Furthermore, possible photoluminescence, quenching, and reduction mechanisms were also tentatively proposed. This study may open up a new avenue for addressing some unresolved environmental issues, that is, the decontamination of highly toxic Cr(VI) from water.