Chitosan coating of zein-carboxymethylated short-chain amylose nanocomposites improves oral bioavailability of insulin in vitro and in vivo

Design and Characterization of a Novel Core-Shell Nano Delivery System Based on Zein and Carboxymethylated Short-Chain Amylose for Encapsulation of Curcumin

Curcumin is a naturally occurring hydrophobic polyphenolic compound with a rapid metabolism, poor absorption, and low stability, which severely limits its bioavailability. Here, we employed a starch-protein-based nanoparticle approach to improve the curcumin bioavailability. This study focused on synthesizing nanoparticles with a zein "core" and a carboxymethylated short-chain amylose (CSA) "shell" through anti-solvent precipitation for delivering curcumin. The zein@CSA core-shell nanoparticles were extensively characterized for physicochemical properties, structural integrity, ionic stability, in vitro digestibility, and antioxidant activity. Fourier-transform infrared (FTIR) spectroscopy indicates nanoparticle formation through hydrogen-bonding, hydrophobic, and electrostatic interactions between zein and CSA. Zein@CSA core-shell nanoparticles exhibited enhanced stability in NaCl solution. At a zein-to-CSA ratio of 1:1.25, only 15.7% curcumin was released after 90 min of gastric digestion, and 66% was released in the intestine after 240 min, demonstrating a notable sustained release effect. Furthermore, these nanoparticles increased the scavenging capacity of the 1,1-diphenyl-2-picrylhydrazyl (DPPH•) free radical compared to those composed solely of zein and were essentially nontoxic to Caco-2 cells. This research offers valuable insights into curcumin encapsulation and delivery using zein@CSA core-shell nanoparticles.

Novel green-based polyglycerol polymeric nanoparticles loaded with ferulic acid: A promising approach for hepatoprotection

In the pursuit of eco-friendly and sustainable materials, polyglycerol diacid polymers hold immense promise for drug delivery compared to those derived from fossil fuels. Harnessing this potential, we aimed to prepare nanoparticles (NPs) derived from sustainable polymers, loaded with ferulic acid (FA), a natural polyphenolic compound known for its shielding effect against liver-damaging agents, including carbon tetrachloride (CCl4). Glycerol was esterified with renewable monomers, such as succinic acid, adipic acid, and/or FA, resulting in the creation of a novel class of polyglycerol diacid polymers. Characterization via Fourier-transform infrared spectroscopy and nuclear magnetic resonance confirmed the successful synthesis of these polymers with <7 % residual monomers. FA-loaded NPs were fabricated using the newly synthesized polymers. To further augment their potential, the NPs were coated with chitosan. The chitosan-coated NPs boasted an optimal PS of 290 ± 5.03 nm, showing superior physical stability, and a commendable EE% of 58.79 ± 0.43%w/v. The cytotoxicity was examined on fibroblast cells using the SRB assay. In-vivo experiments employing a CCl4-induced liver injury model yielded compelling evidence of the heightened hepatoprotective effects conferred by chitosan-coated particles. This demonstrates the benefits of incorporating sustainable polymers into innovative composites for efficient drug delivery, indicating their potential for creating versatile platforms for various therapeutic applications.

Materials and structure of polysaccharide-based delivery carriers for oral insulin: A review

Diabetes mellitus is a chronic metabolic disease that affects >500 million patients worldwide. Subcutaneous injection of insulin is the most effective treatment at present. However, regular needle injections will cause pain, inflammation, and other adverse consequences. In recent years, significant progress has been made in non-injectable insulin preparations. Oral administration is the best way of administration due to its simplicity, convenience, and good patient compliance. However, oral insulin delivery is hindered by many physiological barriers in the gastrointestinal tract, resulting in the low relative bioavailability of direct oral insulin delivery. To improve the relative bioavailability, a variety of insulin delivery vectors have been developed. Polysaccharides are used to achieve safe and effective insulin loading due to their excellent biocompatibility and protein affinity. The functional characteristics of polysaccharide-based delivery carriers, such as pH responsiveness, mucosal adhesion, and further functionalization modifications, enhance the gastrointestinal absorption and bioavailability of insulin. This paper reviews the materials and structures of oral insulin polysaccharide-based carriers, providing ideas for further improving the relative bioavailability of oral insulin.

Investigation of physicochemical and biological properties of bacterial cellulose & zein-reinforced edible nanocomposites based on flaxseed mucilage containing Origanum vulgare L. essential oil

In the present study, the effect of zein and different amounts of bacterial cellulose (BC; 1, 2 and 3 wt%) on the physical, mechanical and barrier properties of flaxseed mucilage/carboxymethyl cellulose (FM/CMC) composite was investigated. The appearance of the absorption band at 1320cm-1 in the ATR-FTIR spectra of nanocomposites indicated the successful introduction of zein into their structure. The characteristic peak at 2θ of 9° belonging to zein disappeared in XRD patterns of the prepared composites suggesting the successful coating of zein via hydrogen bonding interactions. SEM images proved the formation of semi-spherical zein microparticles in the FM/CMC matrix. TGA plots ascertained the addition of zein and nanocellulose caused a significant increase in the thermal stability of FM/CMC film, although zein showed a greater effect. The presence of zein and nanocellulose increased the mechanical strength of nanocomposites. The WVP of FM/CMC decreased after the incorporation of zein and nanocellulose, which created a tortuous path for the diffusion of water molecules. The zein particles exhibited a greater influence on improving the mechanical and barrier properties compared to nanocellulose. FM/CMC-Z film exhibited the highest mechanical strength (49.07 ± 5.89 MPa) and the lowest WVP (1.179 ± 0.076). The composites containing oregano essential oil (EO) showed higher than 60 % antibacterial properties. The bactericidal efficiency of FM/CMC/Z-EO and FM/CMC/Z-EO/BC1 nanocomposites decreased about 10% compared to FM/CMC/EO and FM/CMC-Z/BC1. This evidenced the successful encapsulation of EO molecules in zein particles. According to the in vitro release study, entrapment of EO into zein particles could delay the release and provide the extended antimicrobial effect.

Marine biomaterials in biomedical nano/micro-systems

Marine resources in unique marine environments provide abundant, cost-effective natural biomaterials with distinct structures, compositions, and biological activities compared to terrestrial species. These marine-derived raw materials, including polysaccharides, natural protein components, fatty acids, and marine minerals, etc., have shown great potential in preparing, stabilizing, or modifying multifunctional nano-/micro-systems and are widely applied in drug delivery, theragnostic, tissue engineering, etc. This review provides a comprehensive summary of the most current marine biomaterial-based nano-/micro-systems developed over the past three years, primarily focusing on therapeutic delivery studies and highlighting their potential to cure a variety of diseases. Specifically, we first provided a detailed introduction to the physicochemical characteristics and biological activities of natural marine biocomponents in their raw state. Furthermore, the assembly processes, potential functionalities of each building block, and a thorough evaluation of the pharmacokinetics and pharmacodynamics of advanced marine biomaterial-based systems and their effects on molecular pathophysiological processes were fully elucidated. Finally, a list of unresolved issues and pivotal challenges of marine-derived biomaterials applications, such as standardized distinction of raw materials, long-term biosafety in vivo, the feasibility of scale-up, etc., was presented. This review is expected to serve as a roadmap for fundamental research and facilitate the rational design of marine biomaterials for diverse emerging applications.

Modulating the glycemic response of starch-based foods using organic nanomaterials: strategies and opportunities

Traditionally, diverse natural bioactive compounds (polyphenols, proteins, fatty acids, dietary fibers) are used as inhibitors of starch digestive enzymes for lowering glycemic index (GI) and preventing type 2 diabetes mellitus (T2DM). In recent years, organic nanomaterials (ONMs) have drawn a great attention because of their ability to overcome the stability and solubility issues of bioactive. This review aimed to elucidate the implications of ONMs in lowering GI and as encapsulating agents of enzymes inhibitors. The major ONMs are presented. The mechanisms underlying the inhibition of enzymes, the stability within the gastrointestinal tract (GIT) and safety of ONMs are also provided. As a result of encapsulation of bioactive in ONMs, a more pronounced inhibition of enzymes was observed compared to un-encapsulated bioactive. More importantly, the lower the size of ONMs, the higher their inhibitory effects due to facile binding with enzymes. Additionally, in vivo studies exhibited the potentiality of ONMs for protection and sustained release of insulin for GI management. Overall, regulating the GI using ONMs could be a safe, robust and viable alternative compared to synthetic drugs (acarbose and voglibose) and un-encapsulated bioactive. Future researches should prioritize ONMs in real food products and evaluate their safety on a case-by-case basis.

Visually controlled pulsatile release of insulin from chitosan poly-acrylic acid nanobubbles triggered by focused ultrasound

Insulin therapy is the most effective way to control the blood glucose value of diabetic patients. The most effective administration route for insulin is subcutaneous injection because bioavailability for non-injection administration is low and unstable. However, patients often need a multiple daily insulin injection regimen to control basal and postprandial blood glucose, which causes various complications. Controlled pulsatile drug release technology using ultrasound as an external stimulus source is a very promising method to avoid multiple injections of insulin. However, most of the drug-loaded microbubbles used for ultrasound-mediated treatment have a short half-life, which limits their use in controlled pulsatile drug release. More importantly, how to control insulin release is still a challenge. In this paper, chitosan poly-acrylic acid nanobubbles as drug carriers of insulin were prepared to achieve a visually controlled pulsatile release of insulin triggered by focused ultrasound. The experimental results in vivo demonstrated that nanobubbles were stable enough to achieve long-term visualization for 7 days after intramuscular injection in rats. Under the guidance of ultrasound imaging, it is visible to find the position and observe the gray values change of nanobubbles. Thus, when triggered by focused ultrasound, the amount of insulin could be accurately pulsatile released from nanobubbles. In vivo experiments in rats showed that the visually controlled pulsatile release of insulin could be achieved for a long time, up to 3 consecutive days. The blood glucose level could be repeatedly reduced by focused ultrasound irradiation with just one injection. Our research provided a promising way for visually controlled pulsatile release of insulin, which would significantly reduce the injection frequency of insulin.

Progress and prospects of polysaccharide-based nanocarriers for oral delivery of proteins/peptides

The oral route has long been recognized as the most preferred route for drug delivery as it offers high patient compliance and requires minimal expertise. Unlike small molecule drugs, the harsh environment of the gastrointestinal tract and low permeability across the intestinal epithelium make oral delivery extremely ineffective for macromolecules. Accordingly, delivery systems that are rationally constructed with suitable materials to overcome barriers to oral delivery are exceptionally promising. Among the most ideal materials are polysaccharides. Depending on the interaction between polysaccharides and proteins, the thermodynamic loading and release of proteins in the aqueous phase can be realized. Specific polysaccharides (dextran, chitosan, alginate, cellulose, etc.) endow systems with functional properties, including muco-adhesiveness, pH-responsiveness, and prevention of enzymatic degradation. Furthermore, multiple groups in polysaccharides can be modified, which gives them a variety of properties and enables them to suit specific needs. This review provides an overview of different types of polysaccharide-based nanocarriers based on different kinds of interaction forces and the influencing factors in the construction of polysaccharide-based nanocarriers. Strategies of polysaccharide-based nanocarriers to improve the bioavailability of orally administered proteins/peptides were described. Additionally, current restrictions and future trends of polysaccharide-based nanocarriers for oral delivery of proteins/peptides were also covered.

Self-assembled chitosan-insulin oral nanoparticles - A critical perspective review

Chitosan is an abundant natural cationic polysaccharide with excellent biodegradability, bioadhesion, and biocompatibility. Chitosan is extensively researched for various particulate oral insulin drug delivery systems. Oral insulin is economically efficient and more convenient than injections, with greater patient compliance. Electrostatic ionic interaction between cationic chitosan and anionic polymer or insulin leads to the formation of spontaneously self-assembled nanoparticles. This simple technique attracted many researchers as it can be carried out quickly in mild conditions without harmful solvents, such as surfactants or chemical cross-linkers that might degrade the insulin structure. The formulated chitosan nanoparticles help to protect the core insulin from enzymatic degradation in the digestive system and improve paracellular intestinal uptake from the enterocytes due to mucoadhesion and reversible tight junction opening. Moreover, functionalized chitosan nanoparticles create newer avenues for targeted and prolonged delivery. This review focuses on modified chitosan-insulin nanoparticles and their implications on oral insulin delivery. Dependent variables and their optimal concentration ranges used in self-assembly techniques for chitosan-insulin nanoparticular synthesis are summarized. This review provides a comprehensive guide to fine-tune the essential factors to formulate stable insulin-chitosan nanoparticles using mild ionic interactions.

Zein nanoparticles for drug delivery: Preparation methods and biological applications

Zein, a vegetable protein extracted from corn (Zea mays L.), forms a gastro-resistant and mucoadhesive polymer that is cheap and easy to obtain and facilitates the encapsulation of bioactives with hydrophilic, hydrophobic, and amphiphilic properties. The methods used for synthesizing these nanoparticles include antisolvent precipitation/nanoprecipitation, pH-driven, electrospraying, and solvent emulsification-evaporation methods. Each method has its advantages in the preparation of nanocarriers, nevertheless, all of them enable the production of zein nanoparticles that are stable and resistant to environmental factors, with different biological activities required in the cosmetic, food, and pharmaceutical industries. Therefore, zein nanoparticles are promising nanocarriers that can encapsulate various bioactives with anti-inflammatory, antioxidant, antimicrobial, anticancer, and antidiabetic properties. This article reviews the principal methods for obtaining zein nanoparticles containing bioactives, the advantages and characteristics of each method, as well as the main biological applications of nanotechnology-based formulations.

Surface design of nanocarriers: Key to more efficient oral drug delivery systems

As nanocarriers (NCs) can improve the solubility of drugs, prevent their degradation by gastrointestinal (GI) enzymes and promote their transport across the mucus gel layer and absorption membrane, the oral bioavailability of these drugs can be substantially enhanced. All these properties of NCs including self-emulsifying drug delivery systems (SEDDS), solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs), liposomes, polymeric nanoparticles, inorganic nanoparticles and polymeric micelles depend mainly on their surface chemistry. In particular, interaction with food, digestive enzymes, bile salts and electrolytes, diffusion behaviour across the mucus gel layer and fate on the absorption membrane are determined by their surface. Bioinert surfaces limiting interactions with gastrointestinal fluid and content as well as with mucus, adhesive surfaces providing an intimate contact with the GI mucosa and absorption enhancing surfaces can be designed. Furthermore, charge converting surfaces shifting their zeta potential from negative to positive directly at the absorption membrane and surfaces providing a targeted drug release are advantageous. In addition to these passive surfaces, even active surfaces cleaving mucus glycoproteins on their way through the mucus gel layer can be created. Within this review, we provide an overview on these different surfaces and discuss their impact on the performance of NCs in the GI tract.

Cyclodextrin regulated natural polysaccharide hydrogels for biomedical applications-a review

Cyclodextrin and its derivative (CDs) are natural building blocks for linking with other components to afford functional biomaterials. Hydrogels are polymer network systems that can form hydrophilic three-dimensional network structures through different cross-linking methods and are developing as potential materials in biomedical applications. Natural polysaccharide hydrogels (NPHs) are widely adopted in biomedical field with good biocompatibility, biodegradability, low cytotoxicity, and versatility in emulating natural tissue properties. Compared with conventional NPHs, CD regulated natural polysaccharide hydrogels (CD-NPHs) maintain good biocompatibility, while improving poor mechanical qualities and unpredictable gelation times. Recently, there has been increasing and considerable usage of CD-NPHs while there is still no review comprehensively introducing their construction, classification, and application of these hydrogels from the material point of view regarding biomedical fields. To draw a complete picture of the current and future development of CD-NPHs, we systematically overview the classification of CD-NPHs, and provide a holistic view on the role of CD-NPHs in different biomedical fields, especially in drug delivery, wound dressing, cell encapsulation, and tissue engineering. Moreover, the current challenges and prospects of CD-NPHs are discussed rationally, providing an insight into developing vibrant fields of CD-NPHs-based biomedicine, and facilitating their translation from bench to clinical medicine.

Advances in buccal and oral delivery of insulin

Diabetes mellitus is a metabolic endocrine disease characterized by chronic hyperglycemia with disturbances in metabolic processes, such as those related to carbohydrates, fat, and protein. There are two main types of this disease: type 1 diabetes (T1D) and type 2 diabetes (T2D). Insulin therapy is pivotal to the management of diabetes. Over the last two decades, many routes of administration, including nasal, pulmonary, rectal, transdermal, buccal, and ocular, have been investigated. Nevertheless, subcutaneous parenteral administration is still the most common route for insulin therapy. To overcome poor bioavailability and the barriers to oral insulin absorption, novel approaches in the field of oral drug delivery and administration have been brought about by the coalescence of different branches of nanoscience and nanotechnology, such as nanomedicine, nano-biochemistry, and nano-pharmacy. Novel drug delivery systems, including nanoparticles, nano-platforms, and nanocarriers, have been suggested. The objective of this review is to provide an update on the various promising approaches that have been explored and evaluated for the safe and efficient oral and buccal administration of insulin.

Enhanced oral bioavailability from food protein nanoparticles: A mini review

The oral route is the most desirable drug administration path. The oral bioavailability is always compromised from the poor physicochemical and/or biopharmaceutical properties of the active pharmaceutical ingredients. Food protein nanoparticles show promise for oral drug delivery, with improved biosafety and cost-effectiveness compared to polymeric nanoparticles. More importantly, diverse food proteins provide "choice and variety" to meet the challenges faced by different drugs in oral delivery resulting from low solubility, poor permeability, and gastrointestinal stability. The abundance of hydroxyl, amino, and carboxyl groups in food proteins allows easy surface modification of the nanoparticles to impart unique functions. Albeit being in its infancy, food protein nanoparticles exhibit high capability to enhance oral bioavailability of a wide range of drugs from small molecules to biomacromolecules. Considering the rapid growth of the field, the achievements and mechanisms of food protein nanoparticles in enhancing oral bioavailability are reviewed. Factors affecting the performance of food protein nanoparticles are discussed with the purpose to inspire the development of food protein nanoparticle-based oral drug delivery systems.

Preparation and characterization of cationic hyperbranched maltodextrins as potential carrier for siRNA encapsulation

The present study sought to investigate the physicochemical properties of cationic branched maltodextrins with similar degrees of substitution but different degrees of branching and their siRNA delivery capacity. The results showed that the ratio of α-1,6 glycosidic bonds was significantly increased in the sample treated with dual enzymes. The structural characterization results showed that abundant short chains reassembled by 1,4-α-glucan branching enzyme (GBEs) hydrolysis formed hyperbranched short clustered structure. The absorption peaks that appeared in the FT-IR spectrum confirmed the occurrence of quaternization. The complexes formed by self-assembly of cationic maltodextrins and siRNA were verified by the gel retardation assay and atomic force microscopy, demonstrating a uniform spherical structure with a size close to 300-350 nm. Meanwhile, cationic branched maltodextrins could effectively reduce the change of secondary structure of siRNA. Overall, the results suggested that branched maltodextrins with a cationic surface had significant potential as siRNA carriers.

Application of Nanoparticles: Diagnosis, Therapeutics, and Delivery of Insulin/Anti-Diabetic Drugs to Enhance the Therapeutic Efficacy of Diabetes Mellitus

Diabetes mellitus (DM) is a chronic metabolic disorder of carbohydrates, lipids, and proteins due to a deficiency of insulin secretion or failure to respond to insulin secreted from pancreatic cells, which leads to high blood glucose levels. DM is one of the top four noncommunicable diseases and causes of death worldwide. Even though great achievements were made in the management and treatment of DM, there are still certain limitations, mainly related to the early diagnosis, and lack of appropriate delivery of insulin and other anti-diabetic agents. Nanotechnology is an emerging field in the area of nanomedicine and NP based anti-diabetic agent delivery is reported to enhance efficacy by increasing bioavailability and target site accumulation. Moreover, theranostic NPs can be used as diagnostic tools for the early detection and prevention of diseases owing to their unique biological, physiochemical, and magnetic properties. NPs have been synthesized from a variety of organic and inorganic materials including polysaccharides, dendrimers, proteins, lipids, DNA, carbon nanotubes, quantum dots, and mesoporous materials within the nanoscale size. This review focuses on the role of NPs, derived from organic and inorganic materials, in the diagnosis and treatment of DM.

In Vivo Assessment of the Effects of Mono-Carrier Encapsulated Fucoxanthin Nanoparticles on Type 2 Diabetic C57 Mice and Their Oxidative Stress

Fucoxanthin (FX) is a carotenoid from a marine origin that has an important role in our health, especially in the regulation and alleviation of type 2 diabetes. Its specific molecular structure makes it very unstable, which greatly affects its delivery in the body. In this study, FX was encapsulated in a mono-carrier using a hydrolyzed zein to form a nanocomplex with a stable structure and chemical properties (FZNP). Its stability was demonstrated by characterization and the efficacy of FX before and after encapsulation in alleviating diabetes in mice, which was evaluated by in vivo experiments. FZNP reduced the level of fasting blood glucose and restored it to normal levels in T2DM mice, which was not caused by a decrease in food intake, and effectively reduced oxidative stress in the organism. Both FX and FZNP repaired the hepatocyte and pancreatic β-cell damage, increased serum SOD and reduced INS values significantly, upregulated PI3K-AKT genes as well as CaMK and GNAs expression in the pancreas. FZNP increased ADPN and GSH-PX values more significantly and it decreased serum HOMA-IR and MDA values, upregulated GLUT2 expression, promoted glucose transport in pancreatic and hepatocytes, regulated glucose metabolism and glycogen synthesis with much superior effects than FX.

Recent advances in polysaccharide-based in situ forming hydrogels

Polysaccharides comprise an important class of natural polymers; they are abundant, diverse, polyfunctional, typically benign, and are biodegradable. Using polysaccharides to design in situ forming hydrogels is an attractive and important field of study since many polysaccharide-based hydrogels exhibit desirable characteristics including self-healing, responsiveness to environmental stimuli, and injectability. These characteristics are particularly useful for biomedical applications. This review will discuss recent discoveries in polysaccharide-based in situ forming hydrogels, including network architecture designs, curing mechanisms, physical and chemical properties, and potential applications.

Interactions between Nanoparticles and Intestine

The use of nanoparticles (NPs) has surely grown in recent years due to their versatility, with a spectrum of applications that range from nanomedicine to the food industry. Recent research focuses on the development of NPs for the oral administration route rather than the intravenous one, placing the interactions between NPs and the intestine at the centre of the attention. This allows the NPs functionalization to exploit the different characteristics of the digestive tract, such as the different pH, the intestinal mucus layer, or the intestinal absorption capacity. On the other hand, these same characteristics can represent a problem for their complexity, also considering the potential interactions with the food matrix or the microbiota. This review intends to give a comprehensive look into three main branches of NPs delivery through the oral route: the functionalization of NPs drug carriers for systemic targets, with the case of insulin carriers as an example; NPs for the delivery of drugs locally active in the intestine, for the treatment of inflammatory bowel diseases and colon cancer; finally, the potential concerns and side effects of the accidental and uncontrolled exposure to NPs employed as food additives, with focus on E171 (titanium dioxide) and E174 (silver NPs).

Versatile Oral Insulin Delivery Nanosystems: From Materials to Nanostructures

Diabetes is a chronic metabolic disease characterized by lack of insulin in the body leading to failure of blood glucose regulation. Diabetes patients usually need frequent insulin injections to maintain normal blood glucose levels, which is a painful administration manner. Long-term drug injection brings great physical and psychological burden to diabetic patients. In order to improve the adaptability of patients to use insulin and reduce the pain caused by injection, the development of oral insulin formulations is currently a hot and difficult topic in the field of medicine and pharmacy. Thus, oral insulin delivery is a promising and convenient administration method to relieve the patients. However, insulin as a peptide drug is prone to be degraded by digestive enzymes. In addition, insulin has strong hydrophilicity and large molecular weight and extremely low oral bioavailability. To solve these problems in clinical practice, the oral insulin delivery nanosystems were designed and constructed by rational combination of various nanomaterials and nanotechnology. Such oral nanosystems have the advantages of strong adaptability, small size, convenient processing, long-lasting pharmaceutical activity, and drug controlled-release, so it can effectively improve the oral bioavailability and efficacy of insulin. This review summarizes the basic principles and recent progress in oral delivery nanosystems for insulin, including physiological absorption barrier of oral insulin and the development of materials to nanostructures for oral insulin delivery nanosystems.

Fabrication, characterization and functional attributes of zein-egg white derived peptides (EWDP)-chitosan ternary nanoparticles for encapsulation of curcumin: Role of EWDP

The food-derived peptides hydrolyzed from native food protein matrix exhibited various bioactivities and multimeric structures, which make them the promising well-defined nanoplatforms candidates to co-deliver themselves with other bioactive compounds. In this study, zein-egg white derived peptides-chitosan (Z-EWDP-CS) ternary nanoparticles (NPs) were successfully fabricated by the spontaneous assembly to enhance the stability and bioactivity of curcumin (Cur). The novel ternary NPs exhibited a typical nano-spherical structure (138.63 nm, 40.50 mV), and adorable encapsulation efficiency (EE, 93.87%) for Cur. FTIR, XRD and DSC results verified that Cur changed from a crystalline state to an amorphous state, and was successfully entrapped in the cavity of Z-EWDP-CS NPs. Furthermore, the thermal stability, photochemical stability, salt stability, and antioxidant activity were considerably improved in the NPs after the addition of EWDP. Our results demonstrate that the food-derived peptides could be an ideal affinity agent for the co-delivery of themselves with hydrophobic nutraceuticals.

Effects of acid-ethanol hydrolysis and debranch on acetylated starch and its potential used for curcumin carrier

Acetylated acid-ethanol hydrolyzed (AHS) and acetylated debranched starch (ADS) were investigated as prospective nanocarriers. Both acid-ethanol hydrolysis and debranching decreased the molecular weight and viscosity of starch. Acid-ethanol hydrolyzed starch remained the original microstructure, which was confirmed by results of scanning electron microscopy. New absorption peaks in FTIR spectra of starch confirmed the occurrence of acetylation. The substitution degree (DS) of ADS could reach up to 1.18, while that of AHS could be improved by increasing the ethanol concentration. The developed nanoparticles showed uniform spherical structure and the size of that approximated 180-260 nm. The critical micelle concentration was 0.049 mg/mL, and the shift in fluorescence spectra confirmed the interaction between starch and curcumin. These results indicate show that high DS of AHS and ADS could be used as a potential carrier for curcumin delivery.

Co-delivery of insulin and quercetin in W/O/W double emulsions stabilized by different hydrophilic emulsifiers

Insulin (hydrophilic) and quercetin (hydrophobic) have broad biological benefits; however, their rapid hydrolysis (via protease degradation) during digestion hinders their stability and delivery for absorption before degrading. In this study, we encapsulated insulin and quercetin using a self-assembled water-in-oil-in-water (W/O/W) double emulsion. We prepared the co-delivery emulsion by two-step emulsification and investigated the effects of the type of hydrophilic emulsifier for the outer water phase on the physicochemical properties, stability, and digestive properties. The black-bean-protein-stabilized W/O/W double emulsion had a higher absolute zeta potential value (52.80 mV), higher encapsulation efficiency (insulin: 95.7%, quercetin: 93.4%), lower viscosity, better emulsifying properties (EAI: 122.26 m²/g, ESI: 224 min), and lower levels of hydroperoxides (0.86 mmol/L) and TBARS (25.80 μmol/L) than emulsions stabilized by other hydrophilic emulsifiers. The emulsion yielded a 2.60- and 4.56-fold increase in the bioaccessibility of insulin and quercetin, respectively, while increasing their chemical stability and solubility under simulated gastrointestinal conditions.

Combatting Helicobacter pylori with oral nanomedicines

Helicobacter pylori (H. pylori) infection is considered to be the main cause of most digestive diseases,such as chronic active gastritis, gastroduodenal ulcers, or even gastric cancer. Oral medication is a transformative approach to treat H. pylori-induced infections. However, unlike intravenous administration, orally administrated drugs have to overcome various barriers before reaching the infected sites, which significantly limits the therapeutic efficacy. These challenges may be addressed by emerging nanomedicine that is equipped with nanotechnology approaches to enable efficient and effective targeted delivery of drugs. Herein, in this review, we first discuss the conventional therapy for the eradication of H. pylori. Through the introduction of the critical barriers of oral administration, the benefits of nanomedicine are highlighted. Recently-published examples of nanocarriers for combating H. pylori in terms of design, preparation, and antimicrobial mechanisms are then presented, followed by our perspective on potential future research directions of oral nanomedicines.

Linear Dextrin as Potential Insulin Delivery System: Effect of Degree of Polymerization on the Physicochemical Properties of Linear Dextrin-Insulin Inclusion Complexes

In the current study, linear dextrin (LD) was prepared using waxy potato starch debranched with pullulanase, which has attracted immense interest in the food, pharmaceutical, and cosmetic industries as a versatile ingredient. Various LDs were separated on the basis of their differential solubility in aqueous/ethanol solutions of different volumetric ratios. Three LD products—LD Fabrications with 40% ethanol (F-40); LD Fabrications with 50% ethanol (F-50); and LD Fabrications with 60%, 70%, and 80% ethanol (F-M)—were obtained with an average degree of polymerization (DP) values of 31.44, 21.84, and 16.10, respectively. The results of Fourier transform infrared spectroscopy (FT-IR) analysis revealed that the reaction mainly involved hydrogen bonding and a hydrophobic interaction between LD and insulin in the process of inclusion complex formation. X-ray diffraction (XRD) results indicated that insulin was encapsulated in LD. The results of circular dichroism (CD) showed that the changes in the secondary structure of insulin were negligible during the release from the inclusion complexes. The order of encapsulation capacity is as follows: the complex composed of F-M and insulin (F-M-INS) > the complex composed of LD and insulin (LD-INS) > the complex composed of F-50 and insulin (F-50-INS) > and the complex composed of F-40 and insulin (F-40-INS). F-M-INS inclusion complexes showed a better effect on reducing the release of insulin in gastric juice and promoting the release of insulin in intestinal juice and blood plasma than LD-INS.

Novel porous starch/alginate hydrogels for controlled insulin release with dual response to pH and amylase

An important principle in the development of oral insulin is to protect insulin from the harsh conditions of the stomach and release it in a controlled manner in the intestine. In the present study, novel insulin-loaded porous starch-alginate hydrogel systems (In-S-Alg) including In-MS-Alg (prepared with porous maize starch), In-WS-Alg (porous waxy maize starch), and In-RS-Alg (porous rice starch) were successfully developed. As a representative, In-MS-Alg was further coated with gelatinized-retrograded high amylose maize starch (HA) films with different thicknesses to prepare In-MS-HA/Alg hydrogel beads for improving the functionality of controlled release of insulin under the action of α-amylase. The In-S-Alg and In-MS-HA/Alg hydrogel beads were evaluated in terms of structural and morphological properties, encapsulation effect on insulin as well as its release behavior. The results show that insulin was distributed in the pores and cavities of porous starch granules. In In-MS-HA/Alg hydrogel beads, insulin was increasingly blocked inside porous starch with the increased thickness of the HA film. Encapsulation efficiency of insulin in all In-S-Alg and In-MS-HA/Alg hydrogel beads was >80%. Amazingly, both the hydrogel beads successfully achieved the goal of triggered release upon pH changes and α-amylase addition. Most of the insulin (about 90%) was retained in the simulated gastric fluid; while the release rate of insulin in the simulated intestinal fluid increased gradually, and was further accelerated in the presence of α-amylase. Furthermore, for the In-MS-HA/Alg hydrogel beads, the insulin release rate can be gradually reduced by increasing the thickness of the HA film, which provided the possibility to match the rate of increase of the blood glucose level after the intake of food with different glycemic indices. Therefore, the novel hydrogel prepared in this study may be a promising and safe delivery carrier for oral insulin.

Nanotechnologies for the delivery of biologicals: Historical perspective and current landscape

Biological macromolecule-based therapeutics irrupted in the pharmaceutical scene generating a great hope due to their outstanding specificity and potency. However, given their susceptibility to degradation and limited capacity to overcome biological barriers new delivery technologies had to be developed for them to reach their targets. This review aims at analyzing the historical seminal advances that shaped the development of the protein/peptide delivery field, along with the emerging technologies on the lead of the current landscape. Particularly, focus is made on technologies with a potential for transmucosal systemic delivery of protein/peptide drugs, followed by approaches for the delivery of antigens as new vaccination strategies, and formulations of biological drugs in oncology, with special emphasis on mAbs. Finally, a discussion of the key challenges the field is facing, along with an overview of prospective advances are provided.

Glucose-Responsive Polyelectrolyte Complexes Based on Dendritic Mesoporous Silica for Oral Insulin Delivery

The postprandial glycemic regulation is essential for diabetic patients to reduce the risk of long-term microvascular and macrovascular complications. Herein, we designed a glucose-responsive oral insulin delivery system based on polyelectrolyte complexes (PECs) for controlling the increasing postprandial glucose concentrations. Briefly, alginate-g-3-aminophenylboronic acid (ALG-g-APBA) and chitosan-g-3-fluoro-4-carboxyphenylboronic acid (CS-g-FPBA) were wrapped on mesoporous silica (MSN) to form the negative charged ALG-g-APBA@MSN and the positive charged CS-g-FPBA@MSN nanoparticles, with an optimum insulin loading capacity of 124 mg/g and 295 mg/g, respectively. ALG-g-APBA@MSN was further cross-linked with CS-g-FPBA@MSN to form PECs through electrostatic interaction and borate esters. The dense polyelectrolyte network wrapped on MSN was capable of preventing insulin from diffusion and regulating its release. The in vitro insulin release of PECs demonstrated an obvious glucose response profile in different glucose concentrations (0 mg/mL, 2 mg/mL, 5 mg/mL) and presented a switch "on" and "off" release regulation at hyperglycemic or normal state. The CCK-8 assay showed that none of the MSN, ALG-g-APBA@MSN, CS-g-FPBA@MSN, and PECs possessed cytotoxicity to Caco-2 cells. For in vivo tests, the oral PECs exhibited a significant hypoglycemic effect and maintained in the euglycemic levels up to approximately 12 h on diabetic rats. Overall, the PECs directly triggered by postprandial glucose in the intestine have a good potential to be applied in intelligent insulin delivery by the oral route.

Insulin- and cholic acid-loaded zein/casein-dextran nanoparticles enhance the oral absorption and hypoglycemic effect of insulin

Diabetes mellitus is the most common metabolic disease in the world. Herein, insulin- and cholic acid-loaded zein nanoparticles with dextran surfaces were fabricated to enhance the oral absorptions of insulin in the intestine and in the liver which is the primary action organ of endogenous insulin. In the nanoparticles, zein acted as cement to embed insulin, cholic acid and casein by hydrophobic interactions. The hydrophilic dextran conjugated to casein by the Maillard reaction was located on the nanoparticle surface. The nanoparticles had an insulin loading efficiency of 74.6%, a cholic acid loading efficiency of 55.1% and a hydrodynamic diameter of 267 nm. The dextran significantly increased the disperse stability of the nanoparticles, protected the loaded insulin from hydrolysis in digestive juices, and increased the trans-mucus permeability of the insulin. The embedded cholic acid molecules were consecutively exposed to the surface when the nanoparticles were gradually eroded by proteases. The exposed cholic acid promoted the absorptions of the nanoparticles in the ileum and liver via bile acid transporters. The effect of pretreated lymphatic transport inhibitor cycloheximide revealed that about half of the nanoparticles were transported via the intestinal lymphatic transport pathway and the other half of the nanoparticles were transported via portal blood absorption. The oral pharmacological bioavailability of the nanoparticles in type I diabetic mice was 12.5-20.5%. This study demonstrates that nanoparticles are a promising oral delivery system for insulin.

An overview of in vitro, ex vivo and in vivo models for studying the transport of drugs across intestinal barriers

Oral administration is the most commonly used route for drug delivery owing to its cost-effectiveness, ease of administration, and high patient compliance. However, the absorption of orally delivered compounds is a complex process that greatly depends on the interplay between the characteristics of the drug/formulation and the gastrointestinal tract. In this contribution, we review the different preclinical models (in vitro, ex vivo and in vivo) from their development to application for studying the transport of drugs across intestinal barriers. This review also discusses the advantages and disadvantages of each model. Furthermore, the authors have reviewed the selection and validation of these models and how the limitations of the models can be addressed in future investigations. The correlation and predictability of the intestinal transport data from the preclinical models and human data are also explored. With the increasing popularity and prevalence of orally delivered drugs/formulations, sophisticated preclinical models with higher predictive capacity for absorption of oral formulations used in clinical studies will be needed.

Preparation, characterization of PLGA/chitosan nanoparticles as a delivery system for controlled release of DHA

In this work, a novel DHA-loaded nanoparticle with PLGA and chitosan (PCSDNP) was successfully prepared. The structure of PCSDNP and DHA-loaded PLGA nanoparticles was measured by transmission electron microscope, scanning electron microscope, and differential scanning calorimeter. The interaction strength between DHA, PLGA, and chitosan was evaluated through Fourier transform infrared spectroscopy. The curves of controlled DHA release and stabilities for different environmental factors of two NPs were evaluated. Importantly, two NPs were almost regularly spherical and the interactions were hydrogen bonds and electrostatic interactions between PLGA and chitosan. These NPs had a good encapsulation rate (80.45%) and high-water solubility than the free DHA molecule. In simulated gastrointestinal fluid, two NPs showed a controlled-release pattern. Overall, PCSDNP had better stability and controlled-release effect with the synergy between CS and PLGA under the conditions of pH (2- 7), ionic strength (0- 500 mM), storage time (0- 42 d), and temperature (30- 80 °C).

Novel formulations and drug delivery systems to administer biological solids

Recent advances in formulation sciences have expanded the previously limited design space for biological modalities, including peptide, protein, and vaccine products. At the same time, the discovery and application of new modalities, such as cellular therapies and gene therapies, have presented formidable challenges to formulation scientists. We explore these challenges and highlight the opportunities to overcome them through the development of novel formulations and drug delivery systems as biological solids. We review the current progress in both industry and academic laboratories, and we provide expert perspectives in those settings. Formulation scientists have made a tremendous effort to accommodate the needs of these novel delivery routes. These include stability-preserving formulations and dehydration processes as well as dosing regimes and dosage forms that improve patient compliance.

A composite chitosan derivative nanoparticle to stabilize a W1/O/W2 emulsion: Preparation and characterization

For preparing stable water-in-oil-in-water emulsion, the role of nanoparticles in stabilizing the interface is very important. In this study, chitosan hydrochloride-carboxymethyl chitosan (CHC-CMC) nanoparticles were prepared considering electrostatic interactions; then the emulsion was prepared and the stability characteristics in presence of NaCl (0-200 mmol/L) and 30 d storage were studied. CHC-CMC nanoparticles (261 nm) were obtained when the CHC: CMC ratio was 1:2. CHC-CMC formation was verified by FT-IR when a new peak appeared at 1580 cm^-1; W₂ contained 2 wt % CHC-CMC and W₁ contained 1 wt % sodium alginate, the creaming index (81.6 %) was higher for the emulsions than Tween 80 (67.4 %) after 30 d. Confocal laser scanning microscopy confirmed the double microstructures, in contrast to the collapse with Tween 80, because the CHC-CMC nanoparticles were densely adsorbing on the oil-water interface. This indicates that CHC-CMC has a stronger ability to stabilize W₁/O/W₂ emulsion than Tween 80.

Can nanoparticles and nano‒protein interactions bring a bright future for insulin delivery?

Insulin therapy plays an essential role in the treatment of diabetes mellitus. However, frequent injections required to effectively control the glycemic levels lead to substantial inconvenience and low patient compliance. In order to improve insulin delivery, many efforts have been made, such as developing the nanoparticles (NPs)-based release systems and oral insulin. Although some improvements have been achieved, the ultimate results are still unsatisfying and none of insulin-loaded NPs systems have been approved for clinical use so far. Recently, nano‒protein interactions and protein corona formation have drawn much attention due to their negative influence on the in vivo fate of NPs systems. As the other side of a coin, such interactions can also be used for constructing advanced drug delivery systems. Herein, we aim to provide an insight into the advance and flaws of various NPs-based insulin delivery systems. Particularly, an interesting discussion on nano‒protein interactions and its potentials for developing novel insulin delivery systems is initiated.

•

Insulin therapy plays essential roles in treating diabetes.

•

Optimizing insulin delivery enhances insulin therapy.

•

Nanoparticles are promising systems for delivery of insulin.

•

Nano-protein interactions influence the delivery of nanoparticles.

•

Nano-protein interactions can be used for advanced delivery of insulin.

Research on the fate of polymeric nanoparticles in the process of the intestinal absorption based on model nanoparticles with various characteristics: size, surface charge and pro-hydrophobics

BACKGROUND

The use of drug nanocarriers to encapsulate drugs for oral administration may become an important strategy in addressing the challenging oral absorption of some drugs. In this study-with the premise of controlling single variables-we prepared model nanoparticles with different particle sizes, surface charges, and surface hydrophobicity/hydrophilicity. The two key stages of intestinal nanoparticles (NPs) absorption-the intestinal mucus layer penetration stage and the trans-intestinal epithelial cell stage-were decoupled and analyzed. The intestinal absorption of each group of model NPs was then investigated.

RESULTS

Differences in the behavioral trends of NPs in each stage of intestinal absorption were found to result from differences in particle properties. Small size, low-magnitude negative charge, and moderate hydrophilicity helped NPs pass through the small intestinal mucus layer more easily. Once through the mucus layer, an appropriate size, positive surface charge, and hydrophobic properties helped NPs complete the process of transintestinal epithelial cell transport.

CONCLUSIONS

To achieve high drug bioavailability, the basic properties of the delivery system must be suitable for overcoming the physiological barrier of the gastrointestinal tract.

Long-term treatment of polysaccharides-based hydrogel microparticles as oral insulin delivery in streptozotocin-induced type 2 diabetic mice

To develop a more effective and safer drug for the treatment of type 2 diabetes mellitus (T2DM), polysaccharides-based hydrogel microparticles as oral insulin delivery was prepared and explored. This study was aimed to evaluate the antidiabetic effects and hypoglycemic mechanism with long-term administration(four weeks) of oral insulin hydrogel microparticles in type 2 diabetic mice on a model of diabetes using a high fat diet combined with streptozotocin. The results revealed that the long-term treatment of oral insulin polysaccharides-based hydrogel microparticles could significantly alleviate the symptoms of polyphagia, polydipsia, polyuria and weight loss in diabetic mice. Also, oral administration of insulin hydrogel microparticles could significantly reduce fasting blood glucose levels, ameliorate insulin resistance and increase insulin sensitivity in the mice with T2DM. The concentration of plasma TG, TC, LDL-C, FFA, BUN, CRE significantly decreased and the levels of HDL-C increased showed that insulin polysaccharides-based hydrogel microparticles were effective in regulating lipid metabolism and prevent diabetic nephropathy complication in diabetic mice. In addition, the supplementation of insulin hydrogel microparticles could significant improve the antioxidant capacity by increasing the level of SOD, CAT and decreasing the level of MDA, GPT, NO, TNF-α, and reverse histological deterioration of kidney and pancreas in diabetic mice. The above outcome concluded that insulin polysaccharides-based hydrogel microparticles may exhibit promising anti-diabetic activity and the potential to be a drug candidate for T2DM.

In vitro and in vivo evaluations on nanoparticle and phospholipid hybrid nanoparticles with absorption enhancers for oral insulin delivery

Oral delivery of peptide and proteins is challenging due to their poor physical and chemical stability which usually results in inadequate therapeutic efficacy. Nanoparticles encapsulating insulin was developed by the ionic gelation technique using sulfobutyl ether-β-cyclodextrin as an anionic linker. Phospholipid hybrid nanoparticles were formulated by utilizing ionic gelation and thin-film hydration methods using D-α-Tocopheryl polyethylene glycol 1000 succinate, sodium deoxycholate separately and in combination to take the advantage of liposomes and nanoparticles also various absorption enhancement mechanisms. All formulations were characterized and tested for in vitro gastrointestinal stability, in vitro drug release, and cytotoxicity. On the other hand, in vivo effects of developed formulations on reducing blood glucose levels were monitored for 8 hours. Phospholipid hybrid nanoparticles including D-α-Tocopheryl polyethylene glycol 1000 succinate and sodium deoxycholate in combination with 548.7 nm particle size, 0.332 polydispersity index, 22.0 mV zeta potential, and 61.9% encapsulation efficiency, exhibited desired gastrointestinal stability and insulin release in vitro. In addition, the formulation proved its safety with cytotoxicity studies on L929 cells. The subjected phospholipid hybrid nanoparticle formulation was found to be the most effective formulation by reducing and maintaining blood glucose levels with avoiding fluctuations.

New and novel approaches for enhancing the oral absorption and bioavailability of protein and peptides therapeutics

The advancement of the oral route for macromolecules has gained a lot of attention due to its noninvasive nature, safe and challenging in active research but with limited success. Oral administration poses challenges due to poor solubility, short half-life, quick elimination and the physical, chemical and biological barriers of the gastrointestinal tract. Approaches of past for improving oral absorption, such as enhancers, mucoadhesive delivery and enzyme inhibitors have been taken over by novel approaches like advanced liposomes, self-nanoemulsifying drug delivery system, nanoparticles and targeted delivery. Eudratech™ Pep, Peptelligence, Rani Pill and Pharm Film are the emerging technologies for delivering oral proteins and peptide. Calcitonin, semaglutide and octreotide are the peptides available in the market for oral delivery as outcomes of these technologies.

Ionic liquid-mediated delivery of insulin to buccal mucosa

Buccal drug delivery offers a potential non-invasive means of delivering therapeutics to patients. Despite the promise, the feasibility of transporting proteins and peptides into systemic circulation from buccal administration remains a daunting challenge. Here, we report the fabrication of a biodegradable polymeric patch for buccal delivery of insulin using chitosan as the mucoadhesive matrix and ionic liquids (ILs)/deep eutectic solvent (DES) as the transport facilitator. Insulin is mixed with ILs/DES made from Choline and Geranic acid (CAGE) to form a viscoelastic CAGE gel and sandwiched between two layers of a biodegradable polymer. The rheological properties of the CAGE gel were dominated by the elastic modulus and suggested a solid-like viscoelastic behavior. CAGE induced a 7-fold increase in the cumulative insulin transport across the ex vivo porcine buccal tissue (~26% of loaded insulin) which was also confirmed by confocal microscopy. The CAGE/insulin patches placed in the rat buccal pouch in vivo lowered blood glucose levels in a dose-dependent manner (up to 50% drop recorded) with no obvious tissue damage at the application site. The pharmacokinetic performance of the delivered insulin indicated a sustained profile as serum insulin levels plateaued after 3 h for the duration of study. The safety and efficacy of the polymeric patch using insulin as a model drug holds significant promise as a platform technology to deliver injectables through the buccal route.

Enhanced Oral Vaccine Efficacy of Polysaccharide-Coated Calcium Phosphate Nanoparticles

Oral administration of vaccines has been limited due to low immune response compared to parenteral administration. Antigen degradation in the acidic gastrointestinal environment (GI), mucus barriers, and inefficient cellular uptake by immune cells are the major challenges for oral vaccine delivery. To solve these issues, the current study investigates calcium phosphate nanoparticles (CaP NPs) coated with polysaccharides as nanocarriers for oral protein antigen delivery. In this design, the CaP NP core had an optimized antigen encapsulation capacity of 90 mg (BSA-FITC)/g (CaP NPs). The polysaccharides chitosan and alginate were coated onto the CaP NPs to protect the antigens against acidic degradation in the GI environment and enhance the immune response in the small intestine. The antigen release profiles showed that alginate-chitosan-coated CaP NPs prevented antigen release in a simulated gastric fluid (pH 1.2), followed by sustained release in simulated intestinal (pH 6.8) and colonic (pH 7.4) fluids. Cellular uptake and macrophage stimulation data revealed that the chitosan coating enhanced antigen uptake by intestine epithelia cells (Caco-2) and macrophages and improved surface expression of costimulatory molecules on macrophages. In vivo test further demonstrated that oral administration of alginate-chitosan-coated CaP@OVA NPs significantly enhanced the mucosal IgA and serum IgG antibody responses as compared to naked OVA, indicating that the CaP-Chi-Alg nanoparticle can potentially be used as a promising oral vaccine delivery system.

Enhanced Intestinal Absorption of Insulin by Capryol 90, a Novel Absorption Enhancer in Rats: Implications in Oral Insulin Delivery

Labrasol^® is a self-emulsifying excipient that contains saturated polyglycolysed C₆-C₁₄ glycerides and this additive is known to improve the intestinal absorption of poorly absorbed drugs after oral administration. However, the effects of formulations similar to Labrasol^® on the intestinal absorption of poorly absorbed drugs have not been characterized. In this study, we used insulin as a model peptide drug and examined the absorption-enhancing effects of Labrasol^® and its related formulations for insulin absorption in rats. The co-administration of Labrasol-related formulations with insulin reduced the blood glucose levels. Among these formulations, Capryol 90 was the most effective additive. Notably, the effect of Capryol 90 was greater at pH 3.0 than at pH 7.0. Additionally, almost no mucosal damage was observed in the presence of these formulations, as these formulations did not affect the activity of lactate dehydrogenase (LDH) and the amount of protein released from the small intestine. In mechanistic studies, Capryol 90 improved the stability of insulin and suppressed the association with insulin under acidic conditions. The loosening of the tight junctions (TJs) could be the underlying mechanism by which Capryol 90 improved intestinal insulin absorption via a paracellular route. These findings suggest that Capryol 90 is an effective absorption enhancer for improving the intestinal absorption of insulin, without inducing serious damage to the intestinal epithelium.

Oral delivery of exenatide-loaded hybrid zein nanoparticles for stable blood glucose control and β-cell repair of type 2 diabetes mice

BACKGROUND

Exenatide is an insulinotropic peptide drug for type 2 diabetes treatment with low risk of hypoglycemia, and is administrated by subcutaneous injection. Oral administration is the most preferred route for lifelong treatment of diabetes, but oral delivery of peptide drug remains a significant challenge due to the absorption obstacles in gastrointestinal tract. We aimed to produce exenatide-loaded nanoparticles containing absorption enhancer, protectant and stabilizer using FDA approved inactive ingredients and easy to scale-up method, and to evaluate their long-term oral therapeutic effect in type 2 diabetes db/db mice.

RESULTS

Two types of nanoparticles, named COM NPs and DIS NPs, were fabricated using anti-solvent precipitation method. In COM NPs, the exenatide was complexed with cholic acid and phosphatidylcholine to increase the exenatide loading efficiency. In both nanoparticles, zein acted as the cement and the other ingredients were embedded in zein nanoparticles by hydrophobic interaction. Casein acted as the stabilizer. The nanoparticles had excellent lyophilization, storage and re-dispersion stability. Hypromellose phthalate protected the loaded exenatide from degradation in simulated gastric fluid. Cholic acid promoted the intestinal absorption of the loaded exenatide via bile acid transporters. The exenatide loading efficiencies of COM NPs and DIS NPs were 79.7% and 53.6%, respectively. The exenatide oral pharmacological availability of COM NPs was 18.6% and DIS NPs was 13.1%. COM NPs controlled the blood glucose level of the db/db mice well and the HbA_1c concentration significantly decreased to 6.8% during and after 7 weeks of once daily oral administration consecutively. Both DIS NPs and COM NPs oral groups substantially increased the insulin secretion by more than 60% and promoted the β-cell proliferation by more than 120% after the 7-week administration.

CONCLUSIONS

Both COM NPs and DIS NPs are promising systems for oral delivery of exenatide, and COM NPs are better in blood glucose level control than DIS NPs. Using prolamin to produce multifunctional nanoparticles for oral delivery of peptide drug by hydrophobic interaction is a simple and effective strategy.

Cholesterol moieties as building blocks for assembling nanoparticles to achieve effective oral delivery of insulin

The amphiphilic cholesterol-phosphate conjugate can fabricate into cholesterol-coated nanoparticles by reverse emulsion method. The nanoparticles generated a rapid-onset and long-lasting hypoglycemic effect following gavage in T1DM rats.