Histology of human cementum: Its structure, function, and development

Relationship between age-related changes in mandibular third molar roots and the possibility of mental nerve paresthesia after tooth extraction

Mental nerve paresthesia is a serious postoperative complication of mandibular third molar extraction. It appears that no study has examined the relationship between the surface morphology of the mandibular third molar roots and the possibility of mental nerve paresthesia following tooth extraction. Therefore, the root morphology of the mandibular third molars was examined according to age using dental cone beam computed tomography (CBCT), and the possibility of mental nerve paresthesia following tooth extraction was evaluated. The study included 1216 patients who had undergone mandibular third molar extractions. The root morphology of 1534 teeth in 791 patients who had CBCT performed before surgery was studied. Factors evaluated were age, complete or incomplete formation of the mandibular third molar roots, periodontal ligament atrophy of the mandibular third molar roots, hypercementosis, and mandibular canal deformation. Mandibular third molar root formation was completed between the ages of 19 and 30 years. Complete formation of the mandibular third molar roots (P = 0.002) and deformation of the mandibular canal (P < 0.001) were identified as risk factors for mental nerve paresthesia. These findings suggest that the risk of mental nerve paresthesia could be reduced if the extraction of third molars is performed prior to complete root formation.

Population differences in dental cementum growth rates: Implications for using cementum thickness as a method for age estimation

OBJECTIVES

Age at death estimation is a key element to many research questions in biological anthropology, archeology, and forensic science. Dental cementum is a tissue of choice for the estimation of age at death in adult individuals as it continues deposition for the entirety of an individual's life. Previous works have devised regression formulas correlating cementum thickness to age at death. However, interpopulation variances are unknown, and it is therefore not clear whether regressions based on a single population are applicable to individuals with different ancestries.

MATERIALS AND METHODS

Here, we use a sample (n = 52) of teeth from individuals with known age at tooth extraction/death of European, African, and East Asian ancestry to assess whether there are interpopulations differences in cementum growth rate. We measured growth rate in four different areas (2nd and 5th decile of both the lingual and buccal aspect of the root) of each tooth and used nonparametric tests to evaluate population differences in growth rate between homologous regions of the teeth.

RESULTS

The results of the analyses show that, even after controlling for tooth size, individuals of European ancestry have significantly lower growth rates than those of both African and East Asian ancestry across all four tooth areas.

DISCUSSION

These results call into question the applicability of the regression formulas derived from European ancestry individuals to individuals of other ancestries.

Impaired oral health: a required companion of bacterial aspiration pneumonia

Laryngotracheal aspiration has a widely-held reputation as a primary cause of lower respiratory infections, such as pneumonia, and is a major concern of care providers of the seriously ill orelderly frail patient. Laryngeal mechanical inefficiency resulting in aspiration into the lower respiratory tract, by itself, is not the cause of pneumonia. It is but one of several factors that must be present simultaneously for pneumonia to develop. Aspiration of oral and gastric contentsoccurs often in healthy people of all ages and without significant pulmonary consequences. Inthe seriously ill or elderly frail patient, higher concentrations of pathogens in the contents of theaspirate are the primary catalyst for pulmonary infection development if in an immunocompromised lower respiratory system. The oral cavity is a complex and ever changing eco-environment striving to maintain homogeneity among the numerous microbial communities inhabiting its surfaces. Poor maintenance of these surfaces to prevent infection can result inpathogenic changes to these microbial communities and, with subsequent proliferation, can altermicrobial communities in the tracheal and bronchial passages. Higher bacterial pathogen concentrations mixing with oral secretions, or with foods, when aspirated into an immunecompromised lower respiratory complex, may result in bacterial aspiration pneumonia development, or other respiratory or systemic diseases. A large volume of clinical evidence makes it clear that oral cleaning regimens, when used in caring for ill or frail patients in hospitals and long-term care facilities, drastically reduce the incidence of respiratory infection and death. The purpose of this narrative review is to examine oral health as a required causative companionin bacterial aspiration pneumonia development, and the effectiveness of oral infection control inthe prevention of this disease.

Tooth acellular extrinsic fibre cementum incremental lines in humans are formed by parallel branched Sharpey's fibres and not by its mineral phase

In humans, the growth pattern of the acellular extrinsic fibre cementum (AEFC) has been useful to estimate the age-at-death. However, the structural organization behind such a pattern remains poorly understood. In this study tooth cementum from seven individuals from a Mexican modern skeletal series were analyzed with the aim of unveiling the AEFC collagenous and mineral structure using multimodal imaging approaches. The organization of collagen fibres was first determined using: light microscopy, transmission electron microscopy (TEM), electron tomography, and plasma FIB scanning electron microscopy (PFIB-SEM) tomography. The mineral properties were then investigated using: synchrotron small-angle X-ray scattering (SAXS) for T-parameter (correlation length between mineral particles); synchrotron X-ray diffraction (XRD) for L-parameter (mineral crystalline domain size estimation), alignment parameter (crystals preferred orientation) and lattice parameters a and c; as well as synchrotron X-ray fluorescence for spatial distribution of calcium, phosphorus and zinc. Results show that Sharpey's fibres branched out fibres that cover and uncover other collagen bundles forming aligned arched structures that are joined by these same fibres but in a parallel fashion. The parallel fibres are not set as a continuum on the same plane and when they are superimposed project the AEFC incremental lines due to the collagen birefringence. The orientation of the apatite crystallites is subject to the arrangement of the collagen fibres, and the obtained parameter values along with the elemental distribution maps, revealed this mineral tissue as relatively homogeneous. Therefore, no intrinsic characteristics of the mineral phase could be associated with the alternating AEFC incremental pattern.

Lead exposure across the life course and age at death

BACKGROUND

Lead (Pb) exposure has been associated with an increased risk of all-cause mortality, even at low levels. Little is known about how the timing of Pb exposure throughout life may influence these relationships. Quantifying the amount of Pb present in various tissues of the body provides measurements of exposure from different periods of life. These include bone, tooth enamel, which is the hard outer layer of the crown, and tooth cementum, which is the calcified connective tissue covering the tooth root. The purpose of the study was to examine Pb exposure at multiple periods throughout life, including childhood (enamel), adulthood (cementum), and later life (bone), and to estimate their associations with age at death.

METHODS

208 skeleton donors (born 1910-1960) from an ongoing case-control study were included in this study. Pb was measured in tibia (shin), bone using X-Ray Florescence and in teeth using Laser-Ablation Inductively Coupled Plasma Mass Spectroscopy. After excluding unusually high measurements (>2sd), this resulted in a final sample of 111 with all exposure measures. Correlations across measures were determined using partial Spearman correlations. Associations between Pb exposure and age at death were estimated using Multivariable Linear Regression.

RESULTS

Pb measures across exposure periods were all significantly correlated, with the highest correlation between cementum and tibia measures (r = 0.61). Donors were largely female (63.0 %), White (97.3 %), and attended some college (49.5 %). Single exposure models found that higher tooth cementum Pb (-1.27; 95 % CI: -2.48, -0.06) and tibia bone Pb (-0.91; 95 % CI: -1.67, -0.15) were significantly associated with an earlier age at death. When considered simultaneously, only cementum Pb remained significant (-1.51; 95 % CI: -2.92, -0.11). Secondary analyses suggest that the outer cementum Pb may be especially associated with an earlier age at death.

CONCLUSION

Results suggest that higher Pb exposure is associated with an earlier age at death, with adulthood as the life period of most relevance. Additional studies using Pb exposure measures from different life stages should be conducted.

The essential role of Mkx in periodontal ligament on the metabolism of alveolar bone and cementum

Introduction

The periodontium is a connective tissue which consists of periodontal ligament, alveolar bone, cementum and gingiva. Periodontal ligament (PDL) is a specialized connective tissue that connects the cementum - coating the surface of the tooth - to the alveolar bone. Mohawk homeobox (Mkx) is a transcription factor that is expressed in PDL, that is known to play a vital role in the development and homeostasis of PDL. A detailed functional analysis of Mkx in the periodontal ligament for alveolar bone and cementum metabolism has not yet been conducted.

Materials and methods

Alveolar bone height, bone mineral density (BMD) and bone volume fractions (Bone volume/Total volume: BV/TV) were measured and analyzed using micro-computed tomography (Micro-CT) and 3DBon on 7-week-old male wild-type (WT) (Mkx+/+) (n = 10) and Mkx-knockout (Mkx-/-) (n = 6) rats. Hematoxylin and Eosin (H&E), tartrate-resistant acid phosphatase (TRAP), alkaline phosphatase (ALP) and Masson Trichrome staining were performed on 5, 6, and 7-week-old Mkx+/+ and Mkx-/- rats. Cementum surface area and the number of TRAP-positive osteoclasts/mm were quantified, measured, and compared for 5,6 and 7-week-old Mkx+/+ and Mkx-/- rats (n = 3 each).

Results

The level of alveolar bone height was significantly higher in Mkx-/- rats than in Mkx+/+ rats. On the other hand, there was significantly less BMD in Mkx-/- alveolar bone. A significant increase in cellular cementum could be observed as early as 5 weeks in Mkx-/- rats when compared with Mkx+/+ rats of the same age. More TRAP-positive osteoclasts were observed in Mkx-/- rats.

Conclusion

Our findings further reveal the essential roles of Mkx in the homeostasis of the periodontal tissue. Mkx was found to contribute to bone and cementum metabolism and may be essential to the prevention of diseases such as periodontitis, and could show potential in regenerative treatments.

Matrix Metalloproteinases in the Periodontium-Vital in Tissue Turnover and Unfortunate in Periodontitis

The extracellular matrix (ECM) is a complex non-cellular three-dimensional macromolecular network present within all tissues and organs, forming the foundation on which cells sit, and composed of proteins (such as collagen), glycosaminoglycans, proteoglycans, minerals, and water. The ECM provides a fundamental framework for the cellular constituents of tissue and biochemical support to surrounding cells. The ECM is a highly dynamic structure that is constantly being remodeled. Matrix metalloproteinases (MMPs) are among the most important proteolytic enzymes of the ECM and are capable of degrading all ECM molecules. MMPs play a relevant role in physiological as well as pathological processes; MMPs participate in embryogenesis, morphogenesis, wound healing, and tissue remodeling, and therefore, their impaired activity may result in several problems. MMP activity is also associated with chronic inflammation, tissue breakdown, fibrosis, and cancer invasion and metastasis. The periodontium is a unique anatomical site, composed of a variety of connective tissues, created by the ECM. During periodontitis, a chronic inflammation affecting the periodontium, increased presence and activity of MMPs is observed, resulting in irreversible losses of periodontal tissues. MMP expression and activity may be controlled in various ways, one of which is the inhibition of their activity by an endogenous group of tissue inhibitors of metalloproteinases (TIMPs), as well as reversion-inducing cysteine-rich protein with Kazal motifs (RECK).

Bioinspired Multiscale Mineralization: From Fundamentals to Potential Applications

The wondrous and imaginative designs of nature have always been an inexhaustible treasure trove for material scientists. Throughout the long evolutionary process, biominerals with hierarchical structures possess some specific advantages such as outstanding mechanical properties, biological functions, and sensing performances, the formation of which (biomineralization) is delicately regulated by organic component. Provoked by the subtle structures and profound principles of nature, bioinspired functional minerals can be designed with the participation of organic molecules. Because of the designable morphology and functions, multiscale mineralization has attracted more and more attention in the areas of medicine, chemistry, biology, and material science. This review provides a summary of current advancements in this extending topic. The mechanisms underlying mineralization is first concisely elucidated. Next, several types of minerals are categorized according to their structural characteristic, as well as the different potential applications of these materials. At last, a comprehensive overview of future developments for bioinspired multiscale mineralization is given. Concentrating on the mechanism of fabrication and broad application prospects of multiscale mineralization, the hope is to provide inspirations for the design of other functional materials.

Acellular Extrinsic Fiber Cementum Is Invariably Present in the Superficial Layer of Apical Cementum in Mouse Molar

The cementum is a highly mineralized tissue that covers the tooth root. The regional differences among the types of cementum, especially in the extrinsic fibers that contribute to tooth support, remain controversial. Therefore, this study used second harmonic generation imaging in conjunction with automated collagen extraction and image analysis algorithms to facilitate the quantitative examination of the fiber characteristics and the changes occurring in these fibers over time. Acellular extrinsic fiber cementum (AEFC) was invariably observed in the superficial layer of the apical cementum in mouse molars, indicating that this region of the cementum plays a crucial role in supporting the tooth. The apical AEFC exhibited continuity and fiber characteristics comparable with the cervical AEFC, suggesting a common cellular origin for their formation. The cellular intrinsic fiber cementum present in the inner layer of the apical cementum showed consistent growth in the apical direction without layering. This study highlights the dynamic nature of the cementum in mouse molars and underscores the requirement for re-examining its structure and roles. The findings of the present study elucidate the morphophysiological features of cementum and have broader implications for the maintenance of periodontal tissue health.

Recent Advances in Functionalized Electrospun Membranes for Periodontal Regeneration

Periodontitis is a global, multifaceted, chronic inflammatory disease caused by bacterial microorganisms and an exaggerated host immune response that not only leads to the destruction of the periodontal apparatus but may also aggravate or promote the development of other systemic diseases. The periodontium is composed of four different tissues (alveolar bone, cementum, gingiva, and periodontal ligament) and various non-surgical and surgical therapies have been used to restore its normal function. However, due to the etiology of the disease and the heterogeneous nature of the periodontium components, complete regeneration is still a challenge. In this context, guided tissue/bone regeneration strategies in the field of tissue engineering and regenerative medicine have gained more and more interest, having as a goal the complete restoration of the periodontium and its functions. In particular, the use of electrospun nanofibrous scaffolds has emerged as an effective strategy to achieve this goal due to their ability to mimic the extracellular matrix and simultaneously exert antimicrobial, anti-inflammatory and regenerative activities. This review provides an overview of periodontal regeneration using electrospun membranes, highlighting the use of these nanofibrous scaffolds as delivery systems for bioactive molecules and drugs and their functionalization to promote periodontal regeneration.

Spatiotemporal cellular dynamics and molecular regulation of tooth root ontogeny

Tooth root development involves intricate spatiotemporal cellular dynamics and molecular regulation. The initiation of Hertwig's epithelial root sheath (HERS) induces odontoblast differentiation and the subsequent radicular dentin deposition. Precisely controlled signaling pathways modulate the behaviors of HERS and the fates of dental mesenchymal stem cells (DMSCs). Disruptions in these pathways lead to defects in root development, such as shortened roots and furcation abnormalities. Advances in dental stem cells, biomaterials, and bioprinting show immense promise for bioengineered tooth root regeneration. However, replicating the developmental intricacies of odontogenesis has not been resolved in clinical treatment and remains a major challenge in this field. Ongoing research focusing on the mechanisms of root development, advanced biomaterials, and manufacturing techniques will enable next-generation biological root regeneration that restores the physiological structure and function of the tooth root. This review summarizes recent discoveries in the underlying mechanisms governing root ontogeny and discusses some recent key findings in developing of new biologically based dental therapies.

Cementum is key to periodontal tissue regeneration: A review on apatite microstructures for creation of novel cementum-based dental implants

The cementum is the outermost layer of hard tissue covering the dentin within the root portion of the teeth. It is the only hard tissue with a specialized structure and function that forms a part of both the teeth and periodontal tissue. As such, cementum is believed to be critical for periodontal tissue regeneration. In this review, we discuss the function and histological structure of the cementum to promote crystal engineering with a biochemical approach in cementum regenerative medicine. We review the microstructure of enamel and bone while discussing the mechanism underlying apatite crystal formation to infer the morphology of cementum apatite crystals and their complex structure with collagen fibers. Finally, the limitations of the current dental implant treatments in clinical practice are explored from the perspective of periodontal tissue regeneration. We anticipate the possibility of advancing periodontal tissue regenerative medicine via cementum regeneration using a combination of material science and biochemical methods.

[Patterns of hypercementosis and their relationship with possible local etiological factors in radiographs of individuals from a mexican population]

Objective

Hypercementosis (HPC) is an asymptomatic pathology that, according to the existing literature, has a low prevalence, there is a lack of information and research on it, within these studies, few are made by ethnic groups. To determine the prevalence and radiographic patterns of this condition, as well as the analysis of the relationship of the pathology with some of what are considered possible local triggering factors (FDL) in Mexican individuals.

Methodology

1193 orthopantomographies (OPG) were analyzed, randomly selected from patients of both sexes, with a chronological age range between 18 and 90 years, identifying the prevalence of HPC, as well as its relationship between age groups, its morphological patterns (focal, diffuse and sleeve-shaped), its distribution by anatomical region and dental organs (ODs) and the association of its presence with possible local triggering factors.

Results

348 DO with HPC were found in a total of 194 patients (16.30%), with no relevant differences between genders (P> 0.05). There was a significant increase with respect to the presence of HPC in relation to the increase in the age of the patients (P= 0.001), finding it present in 10% of the age group <40 years, in 20.30% in the group of 40 to 60 years and > 60 in 30.20%. It was found more frequently in a diffuse form (75.28%), followed by the focal pattern (19.54%) and finding the sleeve-shaped morphology less common (5.17%). The mandible presented the greatest number of ODs with the presence of HPC, 136 (39.08%), with the left side being the most affected with 86 OD. The dental group with the greatest involvement was that of molars and premolars.

Conclusions

The prevalence of hypercementosis was 16.30% in the Mexican individuals evaluated. Its presence increases as the age of the patients advances. Its main location is the mandibular region with a predilection for premolars and molars. Even though the idiopathic origin is the most frequent, it was observed that dental impaction is a possible local triggering factor.

Elemental mapping of human teeth enamel, dentine and cementum in view of their microstructure

This paper presents a detailed analysis to directly compare the morphology and chemistry of human tooth layers using advanced scanning electron microscopy (SEM) techniques together with supporting data from energy dispersive spectroscopy (EDS) measurements. The aim of this study was to visualise and evaluate the structural and microanalytical differences of the mineralised hard tissues of human teeth. The extracted sound teeth without any pathologies were divided into the following groups: incisors, canines, premolars, and molars. Tooth samples were broken vertically to preserve the primary structures and to visualise individual tooth tissues. Specimens were also used to find variations in the elemental composition of tissues for different tooth groups. The average thickness of the enamel in the tooth groups studied was 1.1 mm and the average width of the enamel prisms was 4.2 µm, with the highest values observed for molars. The analysis of the chemical composition of the enamel showed that Ca and P were among the predominant elements. The average dentine thickness was 1.87 mm, with the highest values determined for molars, and the lowest for canines. The width of the dentinal tubules was less than 2 µm, for molars being significantly smaller. The analysis of the chemical composition of the dentine showed the highest O content of the all tooth tissues analyzed, while a lower P and Ca content was observed compared to the enamel. The cementum thickness averaged 0.14 mm, with the highest values observed for molars and the lowest for incisors. The analysis of the chemical composition of the cementum showed the lowest average O and P content, and the highest average C and N content, compared to the enamel and the dentine. Increasingly accurate imaging and analysis of dental hard tissue structures provides the opportunity for multifactorial evaluation in terms of their clinical application.

In vitro effects of photobiomodulation on cell migration and gene expression of ALP, COL-1, RUNX-2, and osterix in cementoblasts

The aim of this study was to evaluate the effects of photobiomodulation (PBM) on cell migration and alkaline phosphatase (ALP), type I collagen (Col-1), runt-related transcription factor 2 (RUNX-2), and Osterix (OSX) gene expression in a cementoblast culture (OCCM-30), in a microenvironment mimicking an injury on the cementoblast layer, such as it occurs during root resorption. For this, OCCM-30 cells were cultured in 6-well plates and the following parameters were assayed: (1) migration by scratch assay and ALP, Col-1, Runx2, and Osx by real-time PCR. PBM was performed in two protocols using a LED device emitting light at 660 nm (± 30 nm). OCCM-30 cementoblasts were grown and divided into four groups: (1) negative control; (2) positive control (scratch); (3) scratch + PBM with a total energy of 36 J and energy density 1.6 J/cm²; and (4) scratch + PBM with a total energy of 72 J and energy density of 3.2 J/cm². Data were statistically analyzed, with the level of significance set at 5%. Cementoblasts migrated from the edge of the scratch toward the center, and the wound closed after 24 h, with the PBM3.2J/cm² group showing the higher cell migration compared with the other groups at 2 h, 6 h, 8 h, and 13 h (p < 0.05). The control and PBM1.6J/cm² groups showed similar levels of cell migration, with no significant differences (p > 0.05). PBM3.2J/cm² group exhibited greater ALP, Col-1, OSX, and RUNX2 in comparison with the other experimental groups (p < 0.05). Similar levels of all genes evaluated were observed between the PBM1.6J/cm² group and the positive control group (p > 0.05). In conclusion, our findings support the effectiveness of photobiomodulation on cementoblast migration and gene expression, which may contribute to the formation of a new cementum layer.

New Challenges and Prospective Applications of Three-Dimensional Bioactive Polymeric Hydrogels in Oral and Craniofacial Tissue Engineering: A Narrative Review

Regenerative medicine, and dentistry offers enormous potential for enhancing treatment results and has been fueled by bioengineering breakthroughs over the previous few decades. Bioengineered tissues and constructing functional structures capable of healing, maintaining, and regenerating damaged tissues and organs have had a broad influence on medicine and dentistry. Approaches for combining bioinspired materials, cells, and therapeutic chemicals are critical in stimulating tissue regeneration or as medicinal systems. Because of its capacity to maintain an unique 3D form, offer physical stability for the cells in produced tissues, and replicate the native tissues, hydrogels have been utilized as one of the most frequent tissue engineering scaffolds during the last twenty years. Hydrogels' high water content can provide an excellent conditions for cell viability as well as an architecture that mimics real tissues, bone, and cartilage. Hydrogels have been used to enable cell immobilization and growth factor application. This paper summarizes the features, structure, synthesis and production methods, uses, new challenges, and future prospects of bioactive polymeric hydrogels in dental and osseous tissue engineering of clinical, exploring, systematical and scientific applications.

Synchrotron X-ray Studies of the Structural and Functional Hierarchies in Mineralised Human Dental Enamel: A State-of-the-Art Review

Hard dental tissues possess a complex hierarchical structure that is particularly evident in enamel, the most mineralised substance in the human body. Its complex and interlinked organisation at the Ångstrom (crystal lattice), nano-, micro-, and macro-scales is the result of evolutionary optimisation for mechanical and functional performance: hardness and stiffness, fracture toughness, thermal, and chemical resistance. Understanding the physical-chemical-structural relationships at each scale requires the application of appropriately sensitive and resolving probes. Synchrotron X-ray techniques offer the possibility to progress significantly beyond the capabilities of conventional laboratory instruments, i.e., X-ray diffractometers, and electron and atomic force microscopes. The last few decades have witnessed the accumulation of results obtained from X-ray scattering (diffraction), spectroscopy (including polarisation analysis), and imaging (including ptychography and tomography). The current article presents a multi-disciplinary review of nearly 40 years of discoveries and advancements, primarily pertaining to the study of enamel and its demineralisation (caries), but also linked to the investigations of other mineralised tissues such as dentine, bone, etc. The modelling approaches informed by these observations are also overviewed. The strategic aim of the present review was to identify and evaluate prospective avenues for analysing dental tissues and developing treatments and prophylaxis for improved dental health.

Incremental lines in human cellular cementum: A histological study

OBJECTIVES

Human cellular cementum has incremental lines that demarcate individual cementum lamellae. The structural and functional details of the lines remain poorly understood. This study was designed to examine human cellular cementum using light microscopy, scanning electron microscopy, and contact microradiography and to elucidate the ultrastructure of incremental lines and their significance in cellular cementogenesis.

METHODS

Longitudinal paraffin and ground sections of human mandibular molars were prepared. Paraffin sections were stained with hematoxylin, or hematoxylin and eosin, or impregnated with silver. Hematoxylin-stained sections were observed via scanning electron microscopy using NaOH maceration. Silver-impregnated sections were further stained with hematoxylin. Hematoxylin-stained ground sections were examined using contact microradiography.

RESULTS

The incremental lines were found to be collagen fibril-poor layers. The outer area of each cementum lamella consisted of highly mineralized fibrils involved in constructing an alternating lamellar structure, whereas the inner area consisted of irregularly arranged, less highly mineralized, fibrils. The incremental lines corresponded with the innermost sites of the inner area.

CONCLUSIONS

Based on the obtained findings, we suggest that cellular cementogenesis progresses as follows. (1) Cementoblasts alternate between low-to high-activity states. (2) In the earliest low-activity stage, cementoblasts generate poorly mineralized, fibril-poor, incremental lines. (3) As cementoblasts recover activity, fibril-organization and mineralization advance in the cementum. (4) In the high-activity stage, cementoblasts reach full activity and construct the highly mineralized, alternating lamellar structure. (5) Cementoblasts revert back to the low-activity stage. (6) The above processes are repeated, thus, alternately generating the incremental lines and cementum lamellae.

Differential effects of parathyroid hormone, parathyroid hormone-related protein, and abaloparatide on collagen 1 expression by mouse cementoblasts and mouse tooth root density

INTRODUCTION

Parathyroid hormone (PTH) plays an important role in maintaining mineral homeostasis by regulating calcium and phosphate levels. Clinical trials have shown that peptides of PTH (1-34), PTH-related protein (PTHrP 1-36), and the new peptide modeled on PTHrP, abaloparatide, can have different anabolic effects on osteoporotic subjects, but the underlying mechanisms are still unclear. The prevalence of moderate and major gingival recession has been shown to be higher in postmenopausal women with osteoporosis. In addition, there is a significant association between osteoporosis and tooth loss.

METHODS

We investigated the actions of these peptides on the cementoblasts and teeth of mice. The murine cementoblast line, OCCM-30, known to express collagen I (Col1a1), was treated with intermittent PTH (1-34), PTHrP (1-36), or abaloparatide for 6 h/d for 3 days. Microcomputed tomography was performed on the teeth of mice receiving daily injections of phosphate-buffered saline, PTH (1-34), or abaloparatide. Statistical differences were analyzed by a 2-way or 1-way analysis of variance followed by a Tukey's post-hoc test. Results are expressed as mean ± standard deviation, and P <0.05 was considered significant.

RESULTS

Gene expression showed regulation of Bsp, Col1a1, Opg, Rankl, and Mmp13 by the 3 peptides in these cells. Western blots revealed that after intermittent treatment for 3 days, PTH (1-34) caused an increase in COL1A1 protein immediately after treatment. In contrast, abaloparatide showed a latent effect in increasing COL1A1 protein 18 hours after treatment. PTHrP had no effect on COL1A1 expression. Immunofluorescence confirmed the same result as the Western blots. Microcomputed tomography of teeth showed PTH (1-34) injections increased molar root mineral density in mice, whereas abaloparatide increased density in roots of incisors and molars.

CONCLUSIONS

This study reveals the differential anabolic effects of intermittent PTH (1-34), PTHrP (1-36), and abaloparatide on cementoblasts, as revealed by COL1A1 expression and root mineral density. Abaloparatide may be a potential therapeutic approach for achieving improved cementogenesis.

Human Dental Pulp Stem Cells Differentiate into Cementoid-Like-Secreting Cells on Decellularized Teeth Scaffolds

Periodontitis is a common inflammatory disease that in some cases can cause tooth loss. Cementum is a mineralized tissue that forms part of the insertion periodontium and serves to fix the teeth to the alveolar bone. In addition, it acts as a reservoir of different growth and differentiation factors, which regulate the biology of the teeth. Cementogenesis is a complex process that is still under investigation and involves different factors, including dentin sialophosphoprotein (DSPP). In this work we studied the role of surface microtopography in the differentiation of human dental pulp stem cells (hDPSCs) into cementoid-like secreting cells. We cultured hDPSCs on decellularized dental scaffolds on either dentin or cementum surfaces. Cell morphology was evaluated by light and electron microscopy. We also evaluated the DSPP expression by immunohistochemistry. The hDPSCs that was cultured on surfaces with accessible dentinal tubules acquired an odontoblastic phenotype and emitted characteristic processes within the dentinal tubules. These cells synthesized the matrix components of a characteristic reticular connective tissue, with fine collagen fibers and DSPP deposits. The hDPSCs that was cultured on cementum surfaces generated a well-organized tissue consisting of layers of secretory cells and dense fibrous connective tissue with thick bundles of collagen fibers perpendicular to the scaffold surface. Intra- and intercellular deposits of DSPP were also observed. The results presented here reinforce the potential for hDPSCs to differentiate in vitro into cells that secrete a cementoid-like matrix in response to the physical stimuli related to the microtopography of contact surfaces. We also highlight the role of DSPP as a component of the newly formed matrix.

The early wear susceptibility of cementum, enamel and dentine in vitro

OBJECTIVES

To assess the differential early wear susceptibility of cementum, enamel and dentine at a micron level.

METHODS

Whole human molar buccal surfaces incorporating natural enamel and cementum (n = 20) confirmed by imaging (digital microscopy: Keyence, VHX-7000 Milton Keynes, UK), were mounted, scanned (profilometry: XYRIS 4000, Taicaan, Southampton, UK), and allocated to receive erosion (citric acid, pH 2.7, 30 min (n = 10)) or erosion/abrasion challenges (3 cycles of (citric acid, pH 2.7, 10 min, 60 300 g linear abrasion strokes), n=10). Samples were polished and the experiment repeated on polished enamel, and polished coronal and radicular dentine within the same tooth. Profilometric wear data were obtained using superimposition: GeoMagic (3Dsystems, Darmstadt, Germany) and subtraction: MountainsMap (DigitalSurf, Besancon, France). Data were normal. A general linear model was used to assess differences between groups and substrates.

RESULTS

The mean step height (SD) for natural enamel was 8.82 μm (2.53) for erosion and 11.48 μm (2.95) for erosion/abrasion. For natural cementum, the mean step height was 6.00 μm (2.29) for erosion and 4.67 μm (1.58) for erosion/abrasion. Dentine step heights ranged from 7.20 μm (1.53) for erosion and 9.79 μm (1.01) for erosion/abrasion with no statistical differences in dentine wear. Natural cementum surfaces had the lowest wear (p<0.001). Dentine had significantly less wear than natural enamel (p<0.02).

CONCLUSIONS

Cementum surfaces demonstrated the most wear resistance, followed by dentine under erosion dominant conditions in this in vitro study. Further in-vivo investigations are needed to confirm the intraoral stability of cementum.

CLINICAL SIGNIFICANCE

Cementum may be the least susceptible of dental substrates to wear and dentine does not wear at a faster rate than enamel under erosive conditions. This adds to our knowledge on the development of non-carious cervical lesions and questions whether wear rates will accelerate once dentine is exposed.

A histological description of alpaca (Vicugna pacos) cheek teeth: Findings and anatomical variations in macroscopically normal molars

Scientific literature on veterinary dentistry in alpacas has historically focused on the description of tooth root abscesses. However, recent studies have shown a variety of other, sometimes preceding dental conditions to be widespread in this species. To allow the development and finetuning of treatment strategies in this species, a more thorough understanding of the underlying etiopathogenesis of dental disease is required. Histological studies focusing on normal dental and surrounding tissues might serve as a basis for this purpose. Nine teeth, extracted from seven alpacas were collected. All samples were retrieved from animals that died or were euthanized for non-dental reasons. Histological sections were prepared at three different levels in each tooth and examined using light microscopy focusing on the assessment of pulp tissue, dentin, cementum, periodontal tissues and the apical region. The histological appearance of the investigated dental tissues in alpacas showed great similarities with other hypsodont species. However, a rather rare type of dentin called “vasodentin” could be identified in all examined cheek teeth. Another species-specific finding was the extremely close proximity of varying neighboring tooth roots that seemed to be responsible for inducing massive resorptive lesions. The results of this study might contribute to a better understanding of the etiopathogenesis of some dental diseases in the alpaca.

Automated age-at-death estimation by cementochronology: Essential application or additional complication?

It has been repeatedly acknowledged that age-at-death estimation based on dental cementum represents a partial and time-consuming method that hinders adoption of this histological approach. User-friendly micrograph analysis represents a growing request of cementochronology. This article evaluates the feasibility of using a module to accurately quantify cementum deposits and compares the module's performance to that of a human expert. On a dental collection (n = 200) of known-age individuals, precision and accuracy of estimates performed by a developed program (101 count/tooth; n = 20,200 counts) were compared to counts performed manually (5 counts/tooth; n = 975 counts). Reliability of the software and agreement between the two approaches were assessed by intraclass correlation coefficient and Bland Altman analysis. The automated module produced reliable and reproducible counts with a higher global precision than the human expert. Although the software is slightly more precise, it shows higher sensitivity to taphonomic damages and does not avoid the trajectory effect described for age-at-death estimation in adults. Likewise, for human counts, global accuracy is acceptable, but underestimations increase with age. The quantification of the agreement between the two approaches shows a minor bias, and 94% of individuals fall within the intervals of agreement. Automation gives an impression of objectivity even though the region of interest, profile position and parameters are defined manually. The automated system may represent a time-saving module that can allow an increase in sample size, which is particularly stimulating for population-based studies.

PD-L1, a Potential Immunomodulator Linking Immunology and Orthodontically Induced Inflammatory Root Resorption (OIIRR): Friend or Foe?

Orthodontically induced inflammatory root resorption (OIIRR) is considered an undesired and inevitable complication induced by orthodontic forces. This inflammatory mechanism is regulated by immune cells that precede orthodontic tooth movement (OTM) and can influence the severity of OIIRR. The process of OIIRR is based on an immune response. On some occasions, the immune system attacks the dentition by inflammatory processes during orthodontic treatment. Studies on the involvement of the PD-1/PD-L1 immune checkpoint have demonstrated its role in evading immune responses, aiming to identify possible novel therapeutic approaches for periodontitis. In the field of orthodontics, the important question arises of whether PD-L1 has a role in the development of OIIRR to amplify the amount of resorption. We hypothesize that blocking of the PD-L1 immune checkpoint could be a suitable procedure to reduce the process of OIIRR during orthodontic tooth movement. This review attempts to shed light on the regulation of immune mechanisms and inflammatory responses that could influence the pathogenesis of OIIRR and to acquire knowledge about the role of PD-L1 in the immunomodulation involved in OIIRR. Possible clinical outcomes will be discussed in relation to PD-L1 expression and immunologic changes throughout the resorption process.

Advanced biomaterials for periodontal tissue regeneration

The periodontium is a suitable target for regenerative intervention, since it does not functionally restore itself after disease. Importantly, the limited regeneration capacity of the periodontium could be improved with the development of novel biomaterials and therapeutic strategies. Of note, the regenerative potential of the periodontium depends not only on its tissue-specific architecture and function, but also on its ability to reconstruct distinct tissues and tissue interfaces, suggesting that the advancement of tissue engineering approaches can ultimately offer new perspectives to promote the organized reconstruction of soft and hard periodontal tissues. Here, we discuss material-based, biologically active cues, and the application of innovative biofabrication technologies to regenerate the multiple tissues that comprise the periodontium.

Polymeric Nanotechnologies for the Treatment of Periodontitis: A Chronological Review

Periodontitis is a chronic infectious and inflammatory disease of periodontal tissues estimated to affect 70 - 80 % of all adults. At the same time, periodontium, the site of periodontal pathologies, is an extraordinarily complex plexus of soft and hard tissues, the regeneration of which using even the most advanced forms of tissue engineering continues to be a challenge. Nanotechnologies, meanwhile, have provided exquisite tools for producing biomaterials and pharmaceutical formulations capable of elevating the efficacies of standard pharmacotherapies and surgical approaches to whole new levels. A bibliographic analysis provided here demonstrates a continuously increasing research output of studies on the use of nanotechnologies in the management of periodontal disease, even when they are normalized to the total output of studies on periodontitis. The great majority of biomaterials used to tackle periodontitis, including those that pioneered this interesting field, have been polymeric. In this article, a chronological review of polymeric nanotechnologies for the treatment of periodontitis is provided, focusing on the major conceptual innovations since the late 1990s, when the first nanostructures for the treatment of periodontal diseases were fabricated. In the opening sections, the etiology and pathogenesis of periodontitis and the anatomical and histological characteristics of the periodontium are being described, along with the general clinical manifestations of the disease and the standard means of its therapy. The most prospective chemistries in the design of polymers for these applications are also elaborated. It is concluded that the amount of innovation in this field is on the rise, despite the fact that most studies are focused on the refinement of already established paradigms in tissue engineering rather than on the development of revolutionary new concepts.

Development and regeneration of periodontal supporting tissues

Periodontal tissues, including gingiva, cementum, periodontal ligament, and alveolar bone, play important roles in oral health. Under physiological conditions, periodontal tissues surround and support the teeth, maintaining the stability of the teeth and distributing the chewing forces. However, under pathological conditions, with the actions of various pathogenic factors, the periodontal tissues gradually undergo some irreversible changes, that is, gingival recession, periodontal ligament rupture, periodontal pocket formation, alveolar bone resorption, eventually leading to the loosening and even loss of the teeth. Currently, the regenerations of the periodontal tissues are still challenging. Therefore, it is necessary to study the development of the periodontal tissues, the principles and processes of which can be used to develop new strategies for the regeneration of periodontal tissues. This review summarizes the development of periodontal tissues and current strategies for periodontal healing and regeneration.

Titanium Nanosurface with a Biomimetic Physical Microenvironment to Induce Endogenous Regeneration of the Periodontium

The periodontium supports the teeth by dentoalveolar fibrous joints that serve unique oral functions. Endogenous regeneration of the periodontium around artificial teeth (dental implants) provides a cost-effective solution for the extension of healthy life expectancy but remains a challenge in regenerative medicine. Biomimetics can create smart biomaterials that tune endogenous cells at a tissue-material interface. Here, we created a smart titanium nanosurface mimicking the surface nanotopography and micromechanical properties of the tooth root cementum (TRC), which is essential for the induction of dentoalveolar fibrous joints to regenerate the periodontium. After transplantation into the rat renal capsule, only the titanium artificial tooth with the TRC-mimetic nanosurface formed a complex dentoalveolar fibrous joint structure, with bone tissue, periodontal ligament (PDL), and TRC, in the decellularized jawbone matrix. TRC-mimetic titanium implants induce the formation of functional periodontium, even in a jawbone implantation model, which generally causes osseointegration (ankyloses). In human PDL cells, TRC analogousness in the surface mechanical microenvironment regulates matrix mineralization through bone sialoprotein expression and phosphorus metabolism, which are critical for cementogenesis. Therefore, the titanium nanosurfaces with nanotopographical and mechanical microenvironments mimicking the TRC surface induce dentoalveolar fibrous joints for periodontal regeneration by interfacial tuning of endogenous cells.

Evaluation of Infiltrant Application in the Course of Root Cementum Caries with Different Methods of Surface Preparation—An In Vitro Study

The aim of this study is to evaluate the depth of penetration of an experimental preparation with the characteristics of a dental infiltrant into the decalcified root cementum tissue and observation of the root cementum tissue subjected to a single and repeated twice hydrochloric acid etching process. The study material consisted of 20 human teeth (the study group—12 demineralised teeth, the control group—8 teeth). A commercially available Icon preparation and an experimental preparation were used for the study with addition 2% of YF3 (yttrium trifluoride) added as an indicator to facilitate microscopic observation. Each tooth was divided into two zones, blue (Icon) and red (experimental preparation). The teeth were divided into two subgroups—in the first subgroup, the etching preparation was applied once, in the second subgroup twice, and at the end the teeth were infiltrated with the experimental preparation and the Icon preparation. The study of tooth longitudinal section morphology and chemical composition was performed with the use of a Hitachi S-3400N scanning electron microscope. Microscopic observations show that the applied YF3 tracer in most cases agglomerates and remains in the form of conglomerates on the surface of the root cementum. Single particles of YF3 are visible, penetrating through the cementum tissues into the root dentine structure. The degree of tissue infiltration with the resin (depth of penetration into decalcified tissues) is visible at a depth of approx. 80–120 μm. In the test group subjected to a single etching process, good penetration of both resins was noticeable, however, excessive erosion of the root surface was evident in several of the specimens—indicating that damage occurred as a result of the etching process. In the test group subjected to two etching processes, excessive erosion of the cementum is visible in each deposit.

Comparative hard x-ray tomography for virtual histology of zebrafish larva, human tooth cementum, and porcine nerve

Purpose: Synchrotron radiation-based tomography yields microanatomical features in human and animal tissues without physical slicing. Recent advances in instrumentation have made laboratory-based phase tomography feasible. We compared the performance of three cutting-edge laboratory systems benchmarked by synchrotron radiation-based tomography for three specimens. As an additional criterion, the user-friendliness of the three microtomography systems was considered. Approach: The three tomography systems-SkyScan 2214 (Bruker-microCT, Kontich, Belgium), Exciscope prototype (Stockholm, Sweden), and Xradia 620 Versa (Zeiss, Oberkochen, Germany)-were given 36 h to measure three medically relevant specimens, namely, zebrafish larva, archaeological human tooth, and porcine nerve. The obtained datasets were registered to the benchmark synchrotron radiation-based tomography from the same specimens and selected ones to the SkyScan 1275 and phoenix nanotom m^® laboratory systems to characterize development over the last decade. Results: Next-generation laboratory-based microtomography almost reached the quality achieved by synchrotron-radiation facilities with respect to spatial and density resolution, as indicated by the visualization of the medically relevant microanatomical features. The SkyScan 2214 system and the Exciscope prototype demonstrated the complementarity of phase information by imaging the eyes of the zebrafish larva. The 3 - μ m thin annual layers in the tooth cementum were identified using Xradia 620 Versa. Conclusions: SkyScan 2214 was the simplest system and was well-suited to visualizing the wealth of anatomical features in the zebrafish larva. Data from the Exciscope prototype with the high photon flux from the liquid metal source showed the spiral nature of the myelin sheaths in the porcine nerve. Xradia 620 Versa, with detector optics as typically installed for synchrotron tomography beamlines, enabled the three-dimensional visualization of the zebrafish larva with comparable quality to the synchrotron data and the annual layers in the tooth cementum.

Incremental lines in human acellular tooth cementum - new insights by SEM analysis

BACKGROUND

Tooth cementum covers the surface of the root dentine and is produced and laid down in thin layers continuously throughout life. Functionally, different types of tooth cementum can be distinguished, which can be roughly divided into acellular (primary cementum) and cellular (secondary cementum) forms. One main type is acellular extrinsic fibre cementum (AEFC), which covers the cervical and middle third of the root. Light microscopic examinations of transverse sections of AEFC show lamellar patterns of alternating light and dark lines called growth or incremental lines. Following mammalian research, a seasonal rhythm of incremental line formation is also assumed in humans. Previous attempts at visualising incremental lines in the AEFC by scanning electron microscopy (SEM) were not particularly successful. The aim of the present study was to detect incremental lines in the AEFC and to analyse their underlying structure by SEM.

METHODS

For this purpose, non-embedded and resin-embedded transverse and longitudinal sections of three single-rooted teeth obtained from different patients were investigated. The thin sections were not pre-treated (e.g. by etching, grinding or coating).

RESULTS

Lamellar structures, which could be identified as incremental lines, were detectable in both transverse and longitudinal sections, with transverse orientation in the cross-section and longitudinal orientation in the longitudinal section. The lamellar pattern was created by broad fibre-rich layers alternating with narrow fibre-poor layers. The orientation of the collagen fibres changed from layer to layer from transverse to radial direction. The visibility of the layered structure discovered varied significantly.

CONCLUSIONS

The study demonstrate that it is possible, in principle, to detect incremental lines in AEFC and to identify their basic structure using SEM. Our results suggest that the density and orientation of the fibres play an essential role in the formation of incremental lines. Functional aspects seem to be of particular importance.

A Review of In Vivo and Clinical Studies Applying Scaffolds and Cell Sheet Technology for Periodontal Ligament Regeneration

Different approaches to develop engineered scaffolds for periodontal tissues regeneration have been proposed. In this review, innovations in stem cell technology and scaffolds engineering focused primarily on Periodontal Ligament (PDL) regeneration are discussed and analyzed based on results from pre-clinical in vivo studies and clinical trials. Most of those developments include the use of polymeric materials with different patterning and surface nanotopography and printing of complex and sophisticated multiphasic composite scaffolds with different compartments to accomodate for the different periodontal tissues' architecture. Despite the increased effort in producing these scaffolds and their undoubtable efficiency to guide and support tissue regeneration, appropriate source of cells is also needed to provide new tissue formation and various biological and mechanochemical cues from the Extraccellular Matrix (ECM) to provide biophysical stimuli for cell growth and differentiation. Cell sheet engineering is a novel promising technique that allows obtaining cells in a sheet format while preserving ECM components. The right combination of those factors has not been discovered yet and efforts are still needed to ameliorate regenerative outcomes towards the functional organisation of the developed tissues.

Yttrium Trifluoride as a Marker of Infiltration Rate of Decalcified Root Cementum: An In Vitro Study

Research related to the development of a dental infiltrant for minimally invasive treatment of initial caries of hard dental tissues is presented. The formulation of the developed infiltrant material includes typical methacrylate monomers used in dentistry, an author’s adhesion monomer containing metronidazole, a photoinitiating system and yttrium trifluoride (YF₃). The main objective of the study was to evaluate penetration into decalcified root cementum using scanning electron microscope of an experimental preparation with the characteristics of a dental infiltrant compared to a commercial preparation with the addition of YF₃ as a contrast agent. Microscopic observations showed that YF₃ particles virtually did not penetrate deep into the root cementum—this was mainly due to the particle size of YF₃. Observations of cementum and root dentin tissue infiltration: resin tissue infiltration was visible to a depth of about 80 to 120 μm without the use of a tracer, which, due to agglomeration and particle size, remained on the cementum surface or in the resin used for inlaying. There were no differences between the degree of penetration of an experimental preparation with the characteristics of a dental infiltrant, as compared to a commercial preparation.

Multiple assessment of molars with hypercementosis lost due to periodontitis using X-ray micro-computed tomography, electron microprobe analysis, and histological sections

This article aimed to achieve a better understanding of cementum hyperplasia in the maxillary second molars lost due to periodontitis. Six maxillary second molars with hypercementosis were measured for the mineral concentration using micro-computed tomography and calcium element distributions using electron microprobe analysis. Calcium was distributed throughout the cementum, although the mineral concentration differed based on the cementum depth. The hyperplastic cementum was of the extrinsic fiber-rich cellular mixed stratified type. These results have implications for future studies aiming to diagnose hypercementosis. Further studies are needed to investigate the composition of the cementum matrix.

Cemental annulation: An approach to age estimation in transverse and longitudinal sections using three different microscopes

Background

Estimation of age is an important aspect in determining a person's identity. Since teeth are resistant to decay and degradation, estimation of age using dental structures may be a valuable tool in human identification. Recent research suggests that tooth cemental annulation could be used as an effective method for age estimation than other morphologic or histological parameters.

Materials and Methods

A total of 100 extracted teeth were chosen. Using a hard tissue microtome (SP 1600) longitudinal and transverse ground sections of 100 μm thickness of each tooth were prepared. It is further examined under light microscopy, polarized microscopy and phase-contrast microscopy. The images of longitudinal and transverse were magnified on a computer and the cemental lines were counted.

Results

The present study showed is a strong positive correlation for cemental annulation between the calculated age and estimated age when phase-contrast microscopy was used in both longitudinal and transverse sections when compared with other microscopes. The correlation coefficient value was found more significant in the longitudinal section which implies that the phase-contrast microscope was highly reliable and had a significant correlation (P < 0.001) with the actual age compared to other microscopes.

Conclusion

Cemental annulation by various microscopes improves accuracy in the prediction of age and also it allows for age estimation in cases where skeletal fragments are poorly preserved.

Short histological kaleidoscope - recent findings in histology. Part I

This article is a review of new advances in histology, concerning either classification or structure of different tissular elements (basement membrane, hemidesmosomes, urothelium, glandular epithelia, adipose tissue, astrocytes), and various organs' constituents (blood-brain barrier, human dental cementum, tubarial salivary glands, hepatic stellate cells, pineal gland, fibroblasts of renal interstitium, Leydig testicular cells, ovarian hilar cells), as well as novel biotechnological techniques (tissue engineering in angiogenesis), recently introduced.

Autophagy in aging-related oral diseases

Autophagy is an intracellular degradation mechanism that allows recycling of organelles and macromolecules. Autophagic function increases metabolite availability modulating metabolic pathways, differentiation and cell survival. The oral environment is composed of several structures, including mineralized and soft tissues, which are formed by complex interactions between epithelial and mesenchymal cells. With aging, increased prevalence of oral diseases such as periodontitis, oral cancer and periapical lesions are observed in humans. These aging-related oral diseases are chronic conditions that alter the epithelial-mesenchymal homeostasis, disrupting the oral tissue architecture affecting the quality of life of the patients. Given that autophagy levels are reduced with age, the purpose of this review is to discuss the link between autophagy and age-related oral diseases.

Vibrational Imaging Techniques for the Characterization of Hard Dental Tissues: From Bench-Top to Chair-Side

Currently, various analytical techniques, including scanning electron microscopy, X-Ray diffraction, microcomputed tomography, and energy dispersive X-ray spectroscopy, are available to study the structural or elemental features of hard dental tissues. In contrast to these approaches, Raman Microspectroscopy (RMS) has the great advantage of simultaneously providing, at the same time and on the same sample, a morpho-chemical correlation between the microscopic information from the visual analysis of the sample and its chemical and macromolecular composition. Hence, RMS represents an innovative and non-invasive technique to study both inorganic and organic teeth components in vitro. The aim of this narrative review is to shed new light on the applicative potential of Raman Microspectroscopy in the dental field. Specific Raman markers representative of sound and pathological hard dental tissues will be discussed, and the future diagnostic application of this technique will be outlined. The objective and detailed information provided by this technique in terms of the structure and chemical/macromolecular components of sound and pathological hard dental tissues could be useful for improving knowledge of several dental pathologies. Scientific articles regarding RMS studies of human hard dental tissues were retrieved from the principal databases by following specific inclusion and exclusion criteria.

Cell-Free Biomimetic Mineralization Strategies to Regenerate the Enamel Microstructure

The distinct architecture of native enamel gives it its exquisite appearance and excellent intrinsic-extrinsic fracture toughening properties. However, damage to the enamel is irreversible. At present, the clinical treatment for enamel lesion is an invasive method; besides, its limitations, caused by the chemical and physical difference between restorative materials and dental hard tissue, makes the restorative effects far from ideal. With more investigations on the mechanism of amelogenesis, biomimetic mineralization techniques for enamel regeneration have been well developed, which hold great promise as a non-invasive strategy for enamel restoration. This review disclosed the chemical and physical mechanism of amelogenesis; meanwhile, it overviewed and summarized studies involving the regeneration of enamel microstructure in cell-free biomineralization approaches, which could bring new prospects for resolving the challenges in enamel regeneration.

Cells at the Edge: The Dentin-Bone Interface in Zebrafish Teeth

Bone-producing osteoblasts and dentin-producing odontoblasts are closely related cell types, a result from their shared evolutionary history in the ancient dermal skeleton. In mammals, the two cell types can be distinguished based on histological characters and the cells’ position in the pulp cavity or in the tripartite periodontal complex. Different from mammals, teleost fish feature a broad diversity in tooth attachment modes, ranging from fibrous attachment to firm ankylosis to the underlying bone. The connection between dentin and jaw bone is often mediated by a collar of mineralized tissue, a part of the dental unit that has been termed “bone of attachment”. Its nature (bone, dentin, or an intermediate tissue type) is still debated. Likewise, there is a debate about the nature of the cells secreting this tissue: osteoblasts, odontoblasts, or yet another (intermediate) type of scleroblast. Here, we use expression of the P/Q rich secretory calcium-binding phosphoprotein 5 (scpp5) to characterize the cells lining the so-called bone of attachment in the zebrafish dentition. scpp5 is expressed in late cytodifferentiation stage odontoblasts but not in the cells depositing the “bone of attachment”. nor in bona fide osteoblasts lining the supporting pharyngeal jaw bone. Together with the presence of the osteoblast marker Zns-5, and the absence of covering epithelium, this links the cells depositing the “bone of attachment” to osteoblasts rather than to odontoblasts. The presence of dentinal tubule-like cell extensions and the near absence of osteocytes, nevertheless distinguishes the “bone of attachment” from true bone. These results suggest that the “bone of attachment” in zebrafish has characters intermediate between bone and dentin, and, as a tissue, is better termed “dentinous bone”. In other teleosts, the tissue may adopt different properties. The data furthermore support the view that these two tissues are part of a continuum of mineralized tissues. Expression of scpp5 can be a valuable tool to investigate how differentiation pathways diverge between osteoblasts and odontoblasts in teleost models and help resolving the evolutionary history of tooth attachment structures in actinopterygians.

Analysis of the nano and microstructures of the cervical cementum and saliva in periodontitis: A pilot study

OBJECTIVES

During the progression of periodontitis, the structures of the cementum and saliva are altered due to pathological changes in the environment. This study aimed to analyze the nanostructures of the cervical cementum and saliva in patients with periodontitis.

METHODS

Patients with periodontitis (n = 10) and periodontally healthy controls (n = 8) were included. Single-rooted teeth with indications for extraction were obtained from individuals. The cervical-thirds of the roots were sectioned transversely to obtain 1 mm thick sections. Unstimulated whole saliva samples were collected from each individual. The nanostructures of the cementum and saliva were analyzed using small and wide-angle X-ray scattering methods.

RESULTS

The mean radius and distance values of the cementum nanoparticles in the periodontitis and control groups were 368 Å and 1152 Å, and 377 Å and 1186 Å, respectively. The mean radius and distance values of the saliva nanoparticles in the periodontitis and control groups were 425 Å and 1359 Å, and 468 Å and 1452 Å, respectively. More wide-angle X-ray scattering profile peaks were observed in the cementum of the controls. Similarities were observed between the 3D profiles of the cementum and the saliva nanoparticles.

CONCLUSIONS

According to the results of the present study, (i) the cementum and saliva nanoparticles were of similar size in periodontitis and healthy controls, (ii) the cementum was more crystalline according to the (002) crystallographic plane in controls, and (iii) the similarities in the 3D-profile of the cementum and saliva nanoparticles suggest some interactions between them in the sulcus/periodontal pocket at the nanolevel.

Assessment of the Potential Ability to Penetrate into the Hard Tissues of the Root of an Experimental Preparation with the Characteristics of a Dental Infiltratant, Enriched with an Antimicrobial Component-Preliminary Study

Infiltration is a method of penetration with a low viscosity resin that penetrates deep into demineralised tooth tissue and fills the intergranular spaces, hence reducing porosity. Carious lesions initially located at the enamel–cement junction are usually found in elderly patients. Those spots are predisposed to bacterial adhesion originating both from biofilm and from gingival pocket bacteria. The aim of this study was to evaluate the penetration of an experimental preparation, which has the characteristics of a dental infiltrant, enriched with an antibacterial component, into the decalcified root cement tissues of extracted human teeth in elderly patients. An experimental preparation with the characteristics of a dental infiltrant was prepared, applied, and polymerised on the surface of extracted, previously decalcified human teeth. The control sample was Icon (DMG, Hamburg, Germany). The ability of the preparations to penetrate deep into the root cement was evaluated using scanning electron and light microscopy. The study showed that an experimental preparation could potentially be used for treatment of early carious lesions within the tooth root in elderly patients, among others, as it penetrates deep into demineralised tissues. More research is needed.

Cemental tear: Literature review, proposed classification and recommendations for treatment

Cemental tears are an important condition of relevance to Endodontics but are often overlooked. A cemental tear is the partial or complete detachment of the cementum from the cemento-dentinal junction or along the incremental line within the body of cementum. The limited attention received is most likely due to the limited awareness amongst dental professionals and challenges in accurately diagnosing them, resulting in misdiagnosis and erroneous treatment. The aim of this review is to describe the: (i) epidemiology and predisposing factors; (ii) clinical, radiographic and histological features and (iii) the clinical management and treatment outcomes of cemental tear. The review included 37 articles published in English that comprised eight observational studies and 29 case reports. The prevalence of cemental tears was reported to be lower than 2%; whilst the incidence remains unknown. Internal factors due to the inherent structural weakness of cementum and its interface with the dentine, and external factors that are associated with stress have been proposed as the two mechanisms responsible for the development and propagation of cemental tears. Predisposing factors that have been implicated were tooth type, gender, age, previous root canal treatment, history of dental trauma, occlusal trauma and excessive occlusal force; however, evidence is limited. Common clinical and radiographic manifestations of cemental tears resemble the presentations of primary endodontic diseases, primary periodontal diseases and combined endodontic-periodontal lesions. Clinical management tended to focus on complete removal of the torn fragments and periodontal treatment, often combined with regenerative treatment. In this article, a new classification for cemental tears is developed that consists of classes 0 to 6 and stages A, B, C and D based on the: (i) location and accessibility of the torn cemental fragment; (ii) the pattern and extension of the associated bony defect in relation to the root length and (iii) the number of root surface/s affected by the cemental tear/s and the associated bony defect. Recommendations for treatment strategies are also provided and linked to the classification to aid in streamlining the process of treatment decision making.

Possibility of Human Gender Recognition Using Raman Spectra of Teeth

Gender determination of the human remains can be very challenging, especially in the case of incomplete ones. Herein, we report a proof-of-concept experiment where the possibility of gender recognition using Raman spectroscopy of teeth is investigated. Raman spectra were recorded from male and female molars and premolars on two distinct sites, tooth apex and anatomical neck. Recorded spectra were sorted into suitable datasets and initially analyzed with principal component analysis, which showed a distinction between spectra of male and female teeth. Then, reduced datasets with scores of the first 20 principal components were formed and two classification algorithms, support vector machine and artificial neural networks, were applied to form classification models for gender recognition. The obtained results showed that gender recognition with Raman spectra of teeth is possible but strongly depends both on the tooth type and spectrum recording site. The difference in classification accuracy between different tooth types and recording sites are discussed in terms of the molecular structure difference caused by the influence of masticatory loading or gender-dependent life events.

In Vitro Compression Model for Orthodontic Tooth Movement Modulates Human Periodontal Ligament Fibroblast Proliferation, Apoptosis and Cell Cycle

Human Periodontal Ligament Fibroblasts (hPDLF), as part of the periodontal apparatus, modulate inflammation, regeneration and bone remodeling. Interferences are clinically manifested as attachment loss, tooth loosening and root resorption. During orthodontic tooth movement (OTM), remodeling and adaptation of the periodontium is required in order to enable tooth movement. hPDLF involvement in the early phase-OTM compression side was investigated for a 72-h period through a well-studied in vitro model. Changes in the morphology, cell proliferation and cell death were analyzed. Specific markers of the cell cycle were investigated by RT-qPCR and Western blot. The study showed that the morphology of hPDLF changes towards more unstructured, unsorted filaments under mechanical compression. The total cell numbers were significantly reduced with a higher cell death rate over the whole observation period. hPDLF started to recover to pretreatment conditions after 48 h. Furthermore, key molecules involved in the cell cycle were significantly reduced under compressive force at the gene expression and protein levels. These findings revealed important information for a better understanding of the preservation and remodeling processes within the periodontium through Periodontal Ligament Fibroblasts during orthodontic tooth movement. OTM initially decelerates the hPDLF cell cycle and proliferation. After adapting to environmental changes, human Periodontal Ligament Fibroblasts can regain homeostasis of the periodontium, affecting its reorganization.

Comparative evaluation of different human dental tissues and alveolar bone for DNA quantity and quality for forensic investigation

In this study, the efficacy of dental tissues (cementum, dentine and pulp) and alveolar bone as a potential source of DNA was tested in terms of the quality and quantity using nuclear and mitochondrial markers for forensic investigation.This study found dentine as the best source of DNA with only 5.36% imbalanced (PHR<0.7) heterozygous loci. Pulp showed the highest quantity of DNA but exhibited 22.3% imbalanced (PHR<0.7) heterozygous loci. Cementum with highest (46.67%) heterozygote imbalance proved to be the last choice as a source of DNA. Alveolar bone exhibited the second-highest total yield of DNA/mg of tissue. All Global Filer™ STR loci were amplified in 70% samples of fresh alveolar bone whereas for 30% samples, only partial profile was generated along with successful sex determination. All the dental tissues and alveolar bone samples amplified non STR markers (D-loop, Cytochrome Oxidase I, SRY, AMEL). Of the alveolar bones from archival samples, one sample exhibited full STR profile whereas other alveolar bone samples gave partial profiles. This study substantiates alveolar bone as an alternate source of nuclear and mitochondrial DNA.

Sweet tooth: DNA profiling of a cranium from an isolated retained root fragment

Sampling of healthy multi‐rooted teeth is recommended for the genetic identification of human skeletal remains. However, this may not always be possible, as in the reported case consisting of an isolated human cranium found in an aggregate crushing and processing plant in Piedmont, Northwest Italy. The cranium displayed significant weathering, suggesting a post‐mortem interval of several years, and was edentulous with the exception of the apical root fragment of the upper left canine, consequence of an antemortem horizontal fracture. Prolonged decalcification of the root fragment followed by powder‐free DNA extraction from ~10 mg of root tip tissue led to the recovery of >10 ng of high molecular weight human DNA, in comparison with ~0.01 ng of DNA per mg of bone powder obtained from the petrous portion of the temporal bone. Quantity and quality of DNA isolated from apical tooth tissue enabled multiple genotyping, including a reportable female STR profile, mitochondrial DNA analysis, and ancestry‐informative insertion/deletion polymorphisms. Although the cranium remained unidentified after DNA comparisons, our findings confirm that apical tooth tissue is a promising source of DNA, easily obtained through a powder‐free extraction protocol. Results also indicate that root tips should not be overlooked in challenging identification cases, even in the presence of compromised tooth specimens.

Hard Dental Tissues Regeneration-Approaches and Challenges

With the development of the modern concept of tissue engineering approach and the discovery of the potential of stem cells in dentistry, the regeneration of hard dental tissues has become a reality and a priority of modern dentistry. The present review reports the recent advances on stem-cell based regeneration strategies for hard dental tissues and analyze the feasibility of stem cells and of growth factors in scaffolds-based or scaffold-free approaches in inducing the regeneration of either the whole tooth or only of its component structures.

Contrast-enhanced nano-CT reveals soft dental tissues and cellular layers

AIM

To introduce a methodology designed to simultaneously visualize dental ultrastructures, including cellular and soft tissue components, by utilizing phosphotungstic acid (PTA) as a contrast-enhancement agent.

METHODOLOGY

Sound third molars were collected from healthy human adults and fixed in 4% buffered paraformaldehyde. To evaluate the impact of PTA in concentrations of 0.3%, 0.7% and 1% on dental soft and hard tissues for CT imaging, cementum and dentine-pulp sections were cut, dehydrated and stained with immersion periods of 12, 24 h, 2 days or 5 days. The samples were scanned in a high-resolution nano-CT device using pixel sizes down to 0.5 µm to examine both the cementum and pulpal regions.

RESULTS

Dental cementum and periodontium as well as odontoblasts and predentine were made visible through PTA staining in high-resolution three-dimensional nano-CT scans. Different segments of the tooth required different staining protocols. The thickness of the cementum could be computed over the length of the tooth once it was made visible by the PTA-enhanced contrast, and the attached soft tissue components of the interior of the tooth could be shown on the dentine-pulp interface in greater detail. Three-dimensional illustrations allowed a histology-like visualization of the sections in all orientations with a single scan and easy sample preparation. The segmentation of the sigmoidal dentinal tubules and the surrounding dentine allowed a three-dimensional investigation and quantitative of the dentine composition, such as the tubular lumen or the ratio of the tubular lumen area to the dentinal surface.

CONCLUSION

The staining protocol made it possible to visualize hard tissues along with cellular layers and soft tissues in teeth using a laboratory-based nano-CT technique. The protocol depended on both tissue type and size. This methodology offers enhanced possibilities for the concomitant visualization of soft and hard dental tissues.