An update on synthetic dyes adsorption onto clay based minerals: A state-of-art review

A state-of-the-art review on the application of lignosulfonate as a green alternative in soil stabilization

The utilization of lignosulfonate (LS) as a naturally derived biopolymer sourced from lignin in soil stabilization has gained significant attention in recent years. Its intermolecular interaction, hydrophobic and hydrophilic effects, adhesive and binding properties, erosion control abilities, compatibility with various soil types, and environmental sustainability make it a promising alternative to traditional soil stabilizers as well as highlighting its importance. By integrating LS into soil stabilization practices, soil properties can be enhanced, and an eco-friendlier approach can be adopted in the construction sector. This comprehensive review paper extensively examines the applications and structure of LS, as well as their efficacy and mechanisms on a micro-level scale. Afterward, it discusses the geotechnical characteristics of LS-treated soils, including consistency characteristics, dispersivity properties and erosion behavior, electrical conductivity, compaction parameters, permeability and hydraulic conductivity, compressibility characteristics, swelling potential, strength and stiffness properties, durability, and cyclic loading response. In general, LS incorporation into the soils could enhance the geotechnical properties. For instance, the Unconfined Compressive Strength (UCS) of fine-grained soils was observed to improve up to 105 %, while in the case of granular soils, the improvement can be as high as 450 %. This review also examines the economic and environmental efficiency, as well as challenges and ways forward related to LS stabilization. This can lead to economic and environmental benefits given the abundance of LS as a plant polymer for cleaner production and owing to its carbon neutrality and renewability.

Investigation of the efficacy of Alhagi maurorum plant powder for Janus Green B dye removal from wastewater

The growth of industrial activities, has led to a significant increase in the influx of color pollutants into the environment. Phytoremediation can play a crucial role in enhancing wastewater quality. Accordingly, this study sought to evaluate the effectiveness of Alhagi maurorum plant powder in removing Janus Green B (JGB) dye from aqueous solutions. The adsorbent's properties were characterized through Fourier-transform infrared spectroscopy. The study examined various parameters, including initial dye concentration (20-110 mg/L), adsorbent dosage (0.002-0.02 g), solution pH (2-10), and contact time (5-50 min). The experiments revealed that the maximum dye removal efficiency, 99.51%, was achieved under optimal conditions: pH 7, a contact time of 20 min, an adsorbent dosage of 0.01 g, and an initial dye concentration of 90 mg/L. The adsorption of JGB onto the adsorbent followed the Langmuir isotherm model, with a maximum adsorption capacity of 90.909 mg/g. The kinetic results supported a pseudo-second-order model for the adsorption process, with an R2 value of 0.9999. The calculated Gibbs free energy changes (ΔG°) at temperatures of 288, 298, 308, 318, and 328 K were found to be -5354.28, -5993.61, -6439.66, -7026.51, and -7932.05 kJ/mol, respectively, indicating the spontaneity of the adsorption process.

Synthesis of thiomer/nanoclay nanocomposites as a potential drug carrier: evaluation of mucoadhesive and controlled release properties

Novel thiomer/nanoclay nanocomposites based on a thiomer and montmorillonite (MMT) were prepared in order to obtain a mucoadhesive material with controlled release properties for its potential use as drug carrier. The thiomer was synthesized by immobilization of L-cysteine in alginate mediated by carbodiimide reaction and further characterized by FT-IR and Ellman's reaction. Nanocomposites with growing concentrations of thiomer and MMT were prepared and analyzed by XRD, TGA and TEM. Rheological behavior of nanocomposite in contact with mucin and intestinal mucus were studied as in vitro and in situ mucoadhesion approach, showing until ∼10-fold increasing in the complex viscosity and ∼27-fold in elastic modulus when the amount of thiomer is increased. Higuchi and Korsmeyer-Peppas kinetic models were evaluated in order to study the release of deltamethrin from nanocomposite films. Release profiles showed a retard in the migration of the drug influenced by the amount of MMT (P < 0.05). Diffusion coefficient (D) showed a significant decrease (P < 0.0001) when concentration of MMT is increased reaching D = 4.18 × 10-7 m2 h-1, which resulted ∼7-fold lower in comparison with formulation without MMT. This hybrid nanocomposite can be projected as a potential mucoadhesive drug carrier with controlled release properties.

Recent advances and perspectives for intercalation layered compounds. Part 2: applications in the field of catalysis, environment and health

Intercalation compounds represent a unique class of materials that can be anisotropic (1D and 2D-based topology) or isotropic (3D) through their guest/host superlattice repetitive organisation. Intercalation refers to the reversible introduction of guest species with variable natures into a crystalline host lattice. Different host lattice structures have been used for the preparation of intercalation compounds, and many examples are produced by exploiting the flexibility and the ability of 2D-based hosts to accommodate different guest species, ranging from ions to complex molecules. This reaction is then carried out to allow systematic control and fine tuning of the final properties of the derived compounds, thus allowing them to be used for various applications. This review mainly focuses on the recent applications of intercalation layered compounds (ILCs) based on layered clays, zirconium phosphates, layered double hydroxides and graphene as heterogeneous catalysts, for environmental and health purposes, aiming at collecting and discussing how intercalation processes can be exploited for the selected applications.

Waste-Derived Carbon Nano-Onions for the Removal of Organic Dye from Wastewater and Phytotoxicity Studies

Dyes are extensively employed in industries, namely, textiles, cosmetics, paper, pharmaceuticals, tanning, etc. The effluent released from these industries contains various kinds of harmful dyes that adversely impact living beings and the environment due to their recalcitrant and toxic nature. In this study, an effort has been made to eliminate the methylene blue (MB) from wastewater using carbon nano-onions (CNOs) produced from waste frying oil (WFO) using an economical and eco-friendly wick pyrolysis method. The impact of process variables, namely, pH, temperature, process time, MB dye concentration, and adsorbent, was examined for optimum dye removal. The dye removal efficiency (RE) of 99.78% was obtained in 20 min under optimum conditions. The pseudo-second-order model demonstrated a better kinetic fitting with the experimental data. The Langmuir model represented the maximum adsorption capacity (q max) of 43.11 ± 2.56 mg g-1. The regeneration studies demonstrated that the CNOs achieved ∼99.6% MB dye removal over three cycles. Brassica nigra seeds irrigated in treated wastewater showed better growth (3.29 cm) than untreated dye wastewater, which confirms the environmental sustainability of the overall process.

Adsorption of Azorubine E122 dye via Na-mordenite with tryptophan composite: batch adsorption, Box-Behnken design optimisation and antibacterial activity

In the current investigation, we have reported on the preparation of Na-Mordenite (MOR) modified by tryptophan (MOR-NH2) nanocomposite was synthesized and characterized using FT-IR, XRD, SEM, XPS, and BET that represented that the MOR-NH2 has high surface area 288 m2/g and pore volume 0.38 cm3/g. This composite represented high efficiency in removal of food dye Azorubine (E122) was 1043 mg/g. Study all the factors that affected on the adsorption such as pH, dose, salinity, E122 dye concentration as well as study the adsorption isotherm models that represented that was fitted to Langmuir. Moreover, study the effect of time according to it the adsorption process was fitted to Pseudo-second-order, and the effect of temperature that approved that the reaction was endothermic, spontaneous, and chemisorption process. The MOR-NH2 nanocomposite was tested and proven to effectively inhibit the growth of Escherichia coli ATCC® 25922™ and Staphylococcus aureus ATCC® 25923™ at low concentrations. To the best of our knowledge, this work is the first to report the usage of MOR-NH2 adsorbents for the removal of E122 dye in wastewater samples. The mechanism of interaction between MOR-NH2 and E122 dye was determining as it could be through Hydrogen bonding, pore filling, or through π-π interaction. This research offers a promising solution for purifying water sources that are contaminated with a variety of chemicals, microorganisms, and other contaminants.

Novel chitosan-based barrier materials for environmental containment: Synthesis, characterization, and contaminant removal capacities and mechanisms

This study critically appraises employing chitosan as a composite with bentonite, biochar, or both materials as an alternative to conventional barrier materials. A comprehensive literature review was conducted to identify the studies reporting chitosan-bentonite composite (CBC), chitosan amended biochar (CAB), and chitosan-bentonite-biochar composite (CBBC) for effective removal of various contaminants. The study aims to review the synthesis of these composites, identify fundamental properties affecting their adsorption capacities, and examine how these properties affect or enhance the removal abilities of other materials within the composite. Notably, CBC composites have the advantage of adsorbing both cationic and anionic species, such as heavy metals and dyes, due to the cationic nature of chitosan and the anionic nature of montmorillonite, along with the increased accessible surface area due to the clay. CAB composites have the unique advantage of being low-cost sorbents with high specific surface area, affinity for a wide range of contaminants owing to the high surface area and microporosity of biochar, and abundant available functional groups from the chitosan. Limited studies have reported the utilization of CBBC composites to remove various contaminants. These composites can be prepared by combining the steps employed in preparing CBC and CAB composites. They can benefit from the favorable adsorption properties of all three materials while also satisfying the mechanical requirements of a barrier material. This study serves as a knowledge base for future research to develop novel composite barrier materials by incorporating chitosan and biochar as amendments to bentonite.

Recent advances of application of bentonite-based composites in the environmental remediation

Bentonite-based composites have been widely utilized in the removal of various pollutants due to low cost, environmentally friendly, ease-to-operate, whereas the recent advances concerning the application of bentonite-based composites in environmental remediation were not available. Herein, the modification (i.e., acid/alkaline washing, thermal treatment and hybrids) of bentonite was firstly reviewed; Then the recent advances of adsorption of environmental concomitants (e.g., organic (dyes, microplastics, phenolic and other organics) and inorganic pollutants (heavy metals, radionuclides and other inorganic pollutants)) on various bentonite-based composites were summarized in details. Meanwhile, the effect of environmental factors and interaction mechanism between bentonite-based composites and contaminants were also investigated. Finally, the conclusions and prospective of bentonite-based composites in the environmental remediation were proposed. It is demonstrated that various bentonite-based composites exhibited the high adsorption/degradation capacity towards environmental pollutants under the specific conditions. The interaction mechanism involved the mineralization, physical/chemical adsorption, co-precipitation and complexation. This review highlights the effect of different functionalization of bentonite-based composites on their adsorption capacity and interaction mechanism, which is expected to be helpful to environmental scientists for applying bentonite-based composites into practical environmental remediation.

Low-cost materials as vehicles for pesticides in aquatic media: a review of the current status of different biosorbents employed, optimization by RSM approach

Water contamination by pesticides is increasing dramatically due to population growth and the extensive use of pesticides in agriculture, leading to grave environmental and health concerns. Thus, efficient processes and the design and development of effective treatment technologies are required due to the enormous demand for fresh water. The adsorption approach has been widely used to remove organic contaminants such as pesticides because of its performance, less expense, high selectivity, and simplicity of operation compared to other treatment technologies. Among alternative adsorbents, biomaterials abundantly available for pesticide sorption from water resources have attracted the attention of researchers worldwide. The main objective of this review article is to (i) present studies on a wide range of raw or chemically modified biomaterials potentially effective in removing pesticides from aqueous media; (ii) indicating the effectiveness of biosorbents as green and low-cost materials for removing pesticides from wastewater; and (iii) furthermore, report the application of response surface methodology (RSM) for modeling and optimizing adsorption.

Biopolymer Meets Nanoclay: Rational Fabrication of Superb Adsorption Beads from Green Precursors for Efficient Capture of Pb(II) and Dyes

Renewable, green, and safe natural biopolymer-derived materials are highly desired for the purification of pollutants, but significantly improving their performance without the introduction of additional harmful chemicals remains a huge challenge. Based on the concept of "structure optimization design", environment-friendly composite beads (named SA/PASP/RE) with excellent adsorption performance and recyclability were rationally constructed through a green ionic crosslinking route, using the completely green biopolymer sodium alginate (SA), sodium salt of polyaspartic acid (PASP), and the natural nanoclay rectorite (RE) as starting materials. The nano-layered RE was embedded in the polymer matrix to prevent the polymer chain from becoming over-entangled so that more adsorption sites inside the polymer network were exposed, which effectively improved the mass transfer efficiency of the adsorbent and the removal rate of contaminants. The composite beads embedded with 0.6% RE showed high adsorption capacities of 211.78, 197.13, and 195.69 mg/g for Pb(II) and 643.00, 577.80, and 567.10 mg/g for methylene blue (MB) in Yellow River water, Yangtze River water, and tap water, respectively. And the beads embedded with 43% RE could efficiently adsorb Pb(II) and MB with high capacities of 187.78 mg/g and 586.46 mg/g, respectively. This study provides a new route to design and develop a green, cost-effective, and efficient adsorbent for the decontamination of wastewater.

Comparison of Dye Adsorption of Chitosan and Polyethylenimine Modified Bentonite Clays: Optimization, Isotherm, and Kinetic Studies

The aim of this study was to compare the effect of modifying calcium bentonite (Bent-Ca) clay with two cationic polymers, chitosan (Chi) and polyethylenimine (PEI), on the removal of remazol black B (RB-B) dye from an aqueous solution. The samples were characterized by using scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy. The fractional factorial design of 2(6-1) was applied to investigate the effects of pH, temperature, amount of adsorbent, initial dye concentration, contact time, and shaking rate on the adsorption process. To further optimize RB-B removal from an aqueous solution, a Box-Behnken design with three factors and a response surface methodology was used. The optimum conditions were a pH of 3.77, a temperature of 40.45 °C, and an initial RB-B concentration of 77.27 mg L-1 for Bent-Ca-Chi, whereas for Bent-Ca-PEI, the optimum conditions were a pH of 5.53, a temperature of 41.06 °C, and an initial dye concentration of 238.89 mg L-1. To understand the adsorption behavior, the Langmuir and Freundlich isotherms were fitted to the experimental data. It was found that the Langmuir isotherm model matched well with the dye adsorption by Bent-Ca-Chi and Bent-Ca-PEI. The kinetics study was performed using three kinetic models: pseudo-first-order, pseudo-second-order, and intraparticle diffusion models. Among these models, the RB-B dye kinetics were best represented by the pseudo-second-order model equation for the adsorbents.

Advancements in textile dye removal: a critical review of layered double hydroxides and clay minerals as efficient adsorbents

The textile industry is responsible for producing large volumes of wastewater that contain a wide variety of dye compounds. This poses a significant environmental hazard and risks harming both ecosystems and living organisms. This review study explores the advancements in adsorption research for dye removal, with a particular emphasis on the development of various adsorbents. The article provides detailed insights into the toxicity and classification of dyes, different treatment techniques, and the characteristics of numerous adsorbents, with special attention to layered double hydroxides (LDH) and clay minerals. A comprehensive list of adsorbents, encompassing natural materials, agricultural by-products, industrial waste, and activated carbon, is discussed for effective removal of different dyes. Furthermore, the review extensively examines the influence of various adsorption variables, such as pH, initial dye concentration, adsorbent dosage, temperature, contact time, ionic strength, and pore volume of the adsorbent. Additionally, the application of response surface methodology for optimizing adsorption variables is elucidated. Commonly, electrostatic attraction, π-π interactions, n-π interactions, van der Waals forces, H-bonding, and pore diffusion play a major role in adsorption mechanism. The review also found that LDH can eliminate a wide range of dyes from wastewater, achieving excellent uptake capacities often exceeding 500 mg/g, with a removal efficiency of 99%. The Langmuir isotherm and pseudo-second-order kinetic equations gave the best fit to most of the adsorption data. Overall, this review serves as a valuable resource for researchers and practitioners seeking sustainable solutions to address the environmental challenges posed by textile dye contamination.

One-step synthesis of magnetic fly ash composites for methylene blue removal: batch and column study

This study focuses on the synthesis of magnetic fly ash composites and its application for the removal of methylene blue (MB) from wastewater. By-product of oil power plants, oil fly ash, was treated with magnetic nanoparticles after chemical surface modification and dubbed modified fly ash (MFA). MFA was characterized by X-ray fluorescence, diffractogram analysis, scanning electron microscopy, energy-dispersive X-ray (EDX), and Fourier transform infrared (FT-IR) and N2 physisorption. MB (methylene blue) was removed from an aqueous solution using the response surface modelling (RSM) technique, which was used for optimization reasons. All four independent factors were investigated to see how they affected the removal process: adsorbent dosage; contact time; pH; and beginning dye concentration. The rate of MB removal was strongly influenced by the pH of the solution. The Langmuir and Freundlich models were used to examine equilibrium data A for MB adsorption onto the MFA in linear and nonlinear forms. Langmuir gave a better fit. The adsorption kinetics shown by increased kinetic statistics were better characterized by a pseudo-second-order MFA model. As far as thermodynamic characteristics go, adsorption is endothermic and occurs spontaneously. It has been proven that MFA may be used as an adsorbent to remove MB dye with high efficiency, and the quadratic model has been proved to be statistically significant.

Optimization of an experimental study of cationic Pb metal adsorption by resin polymer

To eliminate lead (Pb) ions from metallic solutions, the cationic resin in solid form was utilized. The characterization of the adsorbent was performed using GTA/GTD, SEM spectroscopy, and EDX analysis. The results of these analyses provided insights into the structure and composition of the resin. The removal of Pb (II) ions was found to be highly dependent on various parameters. Firstly, the pH of the metal solution played a crucial role, as the adsorption capacity increased with the pH of the solution, at a maximum equal to (R = 84.78%), at a pH = 8.0. Additionally, the concentration of Pb (II) ions present in the solution influenced the adsorption technique's capacity, with higher concentrations leading to increased adsorption, analysis overhead of high concentration present (100 mg L-1) of the metal lead (II) study, a saturation corresponding a plateau to the resin polymeric saturation is 93.18 mg g-1. To determine the optimal mass of the resin adsorbent, a study was conducted to maximize the removal of Pb (II) ions, at the mass 1.0 g showed that the proportion of inorganic pollutants removed from Pb (II) is entirely qualitative (100%). Furthermore, the effect of temperature on the adsorption process was investigated. It was observed that the rate of the Pb (II) adsorption process decreased as the temperature increased. Kinetic studies were performed to gain further insights into the adsorption process. Pseudo-first-order and pseudo-second-order models, along with the intra-particle diffusion model, were utilized for this purpose. The results indicated that the adsorption process was fast, as evidenced by the findings from the pseudo-second-order study. The saturation technical process was studied, employing several different isothermal models, including Langmuir, Freundlich, and Temkin. Among these models, the Langmuir model was found to best describe the phenomenon of lead metal adsorption by the resin polymeric, is equal to 11.23 mg g-1, with the experimental value precisely (R2 = 0.999). Finally, various thermodynamic techniques were applied to analyze the adsorption process. The thermodynamic parameters such as ΔG° (- 9.78 to - 9.27 kJ mol-1), ΔH° (14.85 kJ mol-1), and ΔS° (0.017 kJ mol-1) were determined. These values indicated that the adsorption process was endothermic and spontaneous, further emphasizing its impetuous nature. The results of the molecular dynamics calculations demonstrated that amino groups are very important in defining the characteristics of cation adsorption. We conclude that this new adsorbent has the potential to significantly improve the process of regularly removing heavy metal ions from wastewater.

Tulsi (Ocimum sanctum) mediated Co nanoparticles with their anti-inflammatory, anti-cancer, and methyl orange dye adsorption properties

Nanotechnology is an emerging technology that uses medicinal plants to extract nanoparticles for conventional applications. In the present investigation, the medical plant Tulsi (Ocimum sanctum) has used in the synthesis of cobalt (Co) nanoparticles in a cost-effective, feasible process. The efficiency of nanoparticles in removing methyl orange dye was evaluated by analyzing their applications in wastewater treatment. An analysis of the anti-inflammatory and anti-cancer properties of Tulsi-mediated Co nanoparticles was conducted to examine their medical application. Morphological analysis of Co nanoparticles showed that the synthesized nanoparticles were in crystal shape with a mean particle size of 110 nm. A batch adsorption study has shown that incubation periods of 5 h, pH 2, temperatures of 70 °C, and adsorbent dosage of 125 μg/mL are optimal for removing methyl orange dye from wastewater. To examine the anti-inflammatory properties of Tulsi-mediated Co nanoparticles, protein denaturation and nitric oxide scavenging assays were performed. The maximum anti-inflammatory response was recorded at a concentration of 250 μg/mL of Co nanoparticles. MTT assays against MDA-MB-231 human breast cancer cells were used to evaluate the anti-cancer properties of Co nanoparticles. This study investigates the economical extraction of Co nanoparticles from tulsi and its potential use in wastewater purification and biomedical applications.

Controversial Issues Related to Dye Adsorption on Clay Minerals: A Critical Review

This critical review points out the most serious and problematic issues to be found in the literature on the adsorption of dyes on clay minerals. The introduction draws attention to the fundamental problems, namely the insufficient characterization of adsorbents, the influence of impurities on the adsorption of dyes, and the choice of inappropriate models for the description of the very complex systems that clay minerals and their systems represent. This paper discusses the main processes accompanying adsorption in colloidal systems of clay minerals. The relationship between the stability of the colloidal systems and the adsorption of dye molecules is analyzed. The usual methodological procedures for determining and evaluating the adsorption of dyes are critically reviewed. A brief overview and examples of modified clay minerals and complex systems for the adsorption of organic dyes are summarized. This review is a guide for avoiding some faults in characterizing the adsorption of organic dyes on clay minerals, to improve the procedure for determining adsorption, to evaluate results correctly, and to find an appropriate theoretical interpretation. The main message of this article is a critical analysis of the current state of the research in this field, but at the same time, it is a guide on how to avoid the most common problems and mistakes.

Reusable flexible poly(vinyl alcohol)/chitosan-based polymer carbon dots composite film for acid blue 93 dye adsorption

The design and synthesis of water-insoluble chitosan-based polymer carbon dots [P(CS-g-CA)CDs] are described. A polyvinyl alcohol/chitosan-based polymer carbon dot [PVA/P(CS-g-CA)CDs] composite film was prepared using a simple casting method to be used in dye adsorption. The composite film was characterized using FT-IR, XPS, transparency, contact angle, and mechanical properties tests, which showed the successful incorporation of P(CS-g-CA)CDs into the film and also revealed that hydrogen bonding improved the mechanical properties of the PVA film. Furthermore, the composite film displayed substantially enhanced hydrophobicity, making it suitable for use in aqueous environments. In addition, the composite film exhibited stable adsorption of acid blue 93 (AB93) at pH 2-9, with an enhanced adsorption capacity of 433.24 mg/g. The adsorption obeyed Langmuir law with an efficiency of more than 89% even after five cycles. Therefore, the PVA/P(CS-g-CA)CDs film is a promising material for the treatment of organic dye-polluted wastewater.

Scalable Production of 2D Minerals by Polymer Intercalation and Adhesion for Multifunctional Applications

Natural and sustainable 2D minerals have many unique properties and may reduce reliance on petroleum-based products. However, the large-scale production of 2D minerals remains challenging. Herein, a green, scalable, and universal polymer intercalation and adhesion exfoliation (PIAE) method to produce 2D minerals such as vermiculite, mica, nontronite, and montmorillonite with large lateral sizes and high efficiency, is developed. The exfoliation relies on the dual functions of polymers involving intercalation and adhesion to expand interlayer space and weaken interlayer interactions of minerals, facilitating their exfoliation. Taking vermiculite as an example, the PIAE produces 2D vermiculite with an average lateral size of 1.83 ± 0.48 µm and thickness of 2.40 ± 0.77 nm at a yield of ≈30.8%, surpassing state-of-the-art methods in preparing 2D minerals. Flexible films are directly fabricated by the 2D vermiculite/polymer dispersion, exhibiting outstanding performances including mechanical strength, thermal resistance, ultraviolet shielding, and recyclability. The representative application of colorful multifunctional window coatings in sustainable buildings is demonstrated, indicating the potential of massively produced 2D minerals.

Rice husk coated with copper oxide nanoparticles for 17α-ethinylestradiol removal from an aqueous solution: adsorption mechanisms and kinetics

The 17 α-ethinylestradiol (EE2) adsorption from aqueous solution was examined using a novel adsorbent made from rice husk powder coated with CuO nanoparticles (CRH). Advanced analyses of FTIR, XRD, SEM, and EDSwere used to identify the classification parameters of a CRH-like surface morphology, configuration, and functional groups. The rice husk was coated with CuO nanoparticles, allowing it to create large surface area materials with significantly improved textural qualities with regard to functional use and adsorption performance, according to a detailed characterization of the synthesized materials. The adsorption process was applied successfully with elimination effectiveness of 100% which can be kept up to 61.3%. The parameters of adsorption were affecting the adsorption process significantly. Thermodynamic data stated that the process of adsorption was endothermic, spontaneous, chemisorption and the molecules of EE2 show affinity with the CRH. It was discovered that the adsorption process controlled by a pseudo-second-order kinetic model demonstrates that the chemisorption process was controlling EE2 removal. The Sips model is regarded as optimal for representing this practice, exhibiting a significantly high determination coefficient of 0.948. This coefficient implies that the adsorption mechanism indicates the occurrence of both heterogeneous and homogeneous adsorption. According to the findings, biomass can serve as a cheap, operative sorbent to remove estrogen from liquified solutions.

Agricultural Solid Wastes Based Adsorbent Materials in the Remediation of Heavy Metal Ions from Water and Wastewater by Adsorption: A Review

Adsorption has become the most popular and effective separation technique that is used across the water and wastewater treatment industries. However, the present research direction is focused on the development of various solid waste-based adsorbents as an alternative to costly commercial activated carbon adsorbents, which make the adsorptive separation process more effective, and on popularising the sustainable options for the remediation of pollutants. Therefore, there are a large number of reported results available on the application of raw or treated agricultural biomass-based alternatives as effective adsorbents for aqueous-phase heavy metal ion removal in batch adsorption studies. The goal of this review article was to provide a comprehensive compilation of scattered literature information and an up-to-date overview of the development of the current state of knowledge, based on various batch adsorption research papers that utilised a wide range of raw, modified, and treated agricultural solid waste biomass-based adsorbents for the adsorptive removal of aqueous-phase heavy metal ions. Metal ion pollution and its source, toxicity effects, and treatment technologies, mainly via adsorption, have been reviewed here in detail. Emphasis has been placed on the removal of heavy metal ions using a wide range of agricultural by-product-based adsorbents under various physicochemical process conditions. Information available in the literature on various important influential physicochemical process parameters, such as the metal concentration, agricultural solid waste adsorbent dose, solution pH, and solution temperature, and importantly, the adsorbent characteristics of metal ion removal, have been reviewed and critically analysed here. Finally, from the literature reviewed, future perspectives and conclusions were presented, and a few future research directions have been proposed.

Super-efficient removal and adsorption mechanism of anionic dyes from water by magnetic amino acid-functionalized diatomite/yttrium alginate hybrid beads as an eco-friendly composite

The development of eco-friendly, large-capacity and easy-to-separate adsorbent materials has always been the focus and difficulty of adsorption technology in wastewater treatment applications based on the characteristics of dye wastewater. Therefore, in this study, a green magnetic glycine(Gly)-functionalized diatomite(Dia)/yttrium alginate (Y-SA) hybrid bead composite (Dia-Gly-Y-SA@Fe₃O₄) was synthesized by the droplet polymerization, and characterized by various modern analytical techniques. The adsorption performance and adsorption mechanism of the composite were evaluated and elucidated by the removal of anionic dyes direct Blue 106 (DB 106), Congo red (CR) and direct red 13 (DR 13) from water. The results show that the composite is a macroparticle gelpolymer with an average particle size of about 1.5 mm, flower-like fold surface structure, abundant porosity and sensitive magnetic response, and displays ultrastrong adsorption ability for three dyes. The adsorption equilibrium of each dye can be reached quickly within 30 min, and the removal efficiency is more than 95% at pH 2.0 and decreases slightly with pH up to 9.0. The adsorption processes could be explained by the Pseudo-second-order rate equation well. All isotherm data fitted the Langmuir model well, and the maximum adsorption capacities were 1635, 2359 and 1165 mg/g for DB 106, CR and DR 13 at 298 K, respectively. The ultrastrong adsorption performance was due to the multisite interaction of physicochemical action and various hydrogen bonds between hybrid beads and dye anions. As a cost-effective magnetic macroparticle adsorbent prepared by natural ingredients, Dia-Gly-Y-SA@Fe₃O₄ composite exhibits much more stronger adsorption efficiency, better collectability and no secondary pollution than powder Dia, and would have a good application prospect for the purification of anionic dye wastewater with a wide pH range.

Application of modified water treatment residuals in water and wastewater treatment: A review

Large quantities of sludge known as water treatment residuals (WTRs) are generated from water treatment facilities across the world. Various attempts have been made to reuse these residuals. Among the different applications of WTRs, their reuse in water and wastewater treatment has received more attention. However, direct application of raw WTRs is associated with some limitations. In the last decade, in order to improve their characteristics, numerous investigators have modified WTRs by different methods. This paper reviews the different methods applied to WTRs to enhance their characteristics. The effects of these modifications on their characteristics are explained. The applications of modified WTRs as a filtration/adsorption medium for treating textile/dye wastewater, groundwater containing different anionic and cationic pollutants, storm water runoff, and as a substrate in constructed wetlands are presented in detail. Future research needs are highlighted. The review clearly indicates the potential of different modification methods to improve the removal of a variety of pollutants by WTRs from water and wastewater.

Amazon raw clay as a precursor of a clay-based adsorbent: experimental study and DFT analysis for the adsorption of Basic Yellow 2 dye

A clay-based adsorbent (CBA) was purified from a sustainable precursor (raw clay, RC), which was obtained from the Amazon region in Brazil. The CBA was characterized using X-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), Brunauer-Emmet-Teller surface area (S_BET, RC = 23.386 m².g^-1, CBA = 33.020 m².g^-1), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), thermogravimetric analysis (TGA), cation exchange capacity (CEC, CBA = 44.75 cmol/kg), and point of zero charge analyses (pH_PZC, CBA = 2.20). Subsequently, CBA was used to adsorb basic yellow 2 (BY2) dye from aqueous solutions. A CBA dosage (1 g/L), initial concentration of dye (C₀ = 15 mg/L), and pH (5.6) were ideal conditions for the BY2 dye removal of ~ 98%. The BY2 kinetics was better represented by the pseudo-first-order (PFO) model while the BY2 equilibrium was well represented by the Sips model, with a maximum adsorption capacity of q_ms = 18.04 mg/g at 28 °C. The negative values of ΔG° and ΔH° showed that the studied process is spontaneous and exothermic, while the values of isosteric heat (∆H_st, -16 to -20 kJ/mol) suggest a predominance of physical interactions. The molecular chemical reactivity of BY2 was investigated using quantum chemical descriptors calculated based on Density Functional Theory (DFT) optimization of the dye molecule, and the results revealed a large energy gap value (4.3900 eV) and considerable chemical hardness (η = 2.1950 eV). Therefore, the correlation between DFT and experimental results consistently sustains that BY2 dye tends to be adsorbed on the CBA surface by electrostatic interactions, thus, this is the possible adsorption mechanism of this process.

A comparative study for the removal of reactive red 49 (RR49) and reactive yellow 15 (RY15) using a novel electrode by electrocoagulation technique

The present work deals with the investigation of the efficiency of the electrocoagulation (EC) technique in the removal of two different reactive dyes as a simple, durable, and cost-effective technique for wastewater treatment. The difference in structure between Reactive Red 49 (RR49) and Reactive Yellow 15 (RY15) is explored during the treatment process through the use of a novel design of electrodes. The optimum conditions obtained were 80 and 60 mg/L of initial dye concentrations, pH of 5.9 and 4 for RR49 and RY15, respectively, 0.5 g of NaCl electrolyte, and 900 and 500 rpm of stirring rate for RR49 and RY17 dyes respectively, which led to the highest percent removal (98.5%) for both dyes. The suitable temperatures were 20 and 30 °C for RR49 and RY15, respectively. The thermodynamic parameters were designated, and it was a spontaneous process for both dyes. The removal process was designated to pseudo- second-order for the RR49 dye and pseudo- first-order for the RY15 dye and fitted to the Langmuir model. Analysis of Variance (ANOVA) was presented to assess the variation of the outcomes attained from each factor.

Recent advances in adsorption of environmental pollutants using metal-organic frameworks-based hydrogels

Water pollution is increasing significantly owing to industrialization and population growth that lead to serious environmental and health issues. Therefore, the design and development of more effective wastewater treatment approaches are necessary due to a significant upsurge in demand for freshwater. More recently, metal-organic frameworks (MOFs) have attracted attention in environmental science owing to their tunable porosity, unique structure, flexibility, and various composition. Despite these attractive advantages, some drawbacks, including intrinsic fragility, unsatisfied processability, dust formation, and poor reusability, have greatly limited their applications. Therefore, MOFs are often designed as supported-based MOFs (e.g., MOFs-coated composites) or 3D structured composites, such as MOFs-based hydrogels. MOFs-based hydrogels are excellent candidates in the sorption process because of their appropriate adsorption capacity, porous structure, good mechanical properties, durability as well as biodegradable features. In this review, the removal of different pollutants (e.g., synthetic dyes, phosphates, heavy metals, antibiotics, and some organic compounds) from aqueous media has been studied by the adsorption process using MOFs-based hydrogels. The important advancements in the fabrication of MOFs-based hydrogels and their capacities in the adsorption of pollutants under experimental conditions have been discussed. Finally, problems and future perspectives on the adsorption process using MOFs-based hydrogels have been investigated.

Chitosan-induced self-assembly of montmorillonite nanosheets along the end-face for methylene blue removal from water

In this study, chitosan-induced self-assembly of montmorillonite nanosheets (MMTNS) along the end-face to form the layered and porous structured composite with high adsorption capacity towards MB dye wastewater was investigated. The self-assembly process was driven by the hydrogen-bond interaction among -OH groups distributed along the end-face of MMTNS and -NH₂ groups on chitosan (CS) chain, which finally formed the infinite two-dimensional lamellae. This technology remained the exposed adsorption sites on MMTNS surface, and solved the separation issue of spent MMTNS from water, making MMTNS/CS an excellent adsorption material for macromolecular MB dye. The maximum adsorption capacity of MMTNS/CS towards MB reached 243 mg/g, which was achieved via the Na⁺- exchange, hydrogen-bond and n-π stacking interactions with MB molecules. This work aimed at breaking through the bottleneck of small adsorption capacity of traditional MMT adsorbents, solving the problem of solid-liquid separation of nanosheets, and effectively reducing the adsorption cost, which might guide an important direction for adsorption material design and development in the future.

Facile construction of cost-effective zinc-aluminium polymeric framework for efficient removal of selective both drug and dye from an aqueous medium

A novel aluminium (Al) and its active alloys are extensively been used in nearly all areas owing to their cost-effectiveness. But when it is subjected to an aqueous medium, gets corroded through a chemical response. In this paper, a novel framework was fabricated by copolymer coating over on Al and loaded with zinc via electro polymerization and electrodeposition method ([EDA- OPDA]Al@Zn). The as-fabricated composite has emerged for the sorption of Methylene Blue (MB) aqueous dye and Paracetomal drug (PAR). The as-fabricated composite framework has been categorized via IR spectra, FE-SEM images, and EDX spectra. The sorption progression was optimized for numerous prompting features like pH, contact time and impact of dosage. Based on kinetics data, the growth in QE value by an enhancement in temperature for adsorption and the higher r values shows the adsorption progression is a pseudo-second-order model. The thermodynamic constraints specify that the field of adsorbate is impulsive and typical endothermic process. Instead, the corrosion resistance of a composite in the 3.5% of NaCl. Solution was explored via EIS spectra and potentio-dynamic polarization. Depending on the observed features, it indicates that the [EDA-OPDA]Al@Zn framework provided fantastic corrosion resistance. So it is obvious that the as-synthesized framework is of multitasking, that it could be successfully performed for the exclusion of MB aqueous dye and PAR drug from the aqueous medium and it also withstands effectively in this corrosive medium.

Insight into a Bentonite-Based Hydrogel for the Conservation of Sandstone-Based Cultural Heritage: In Situ Formation, Reinforcement Mechanism, and High-Durability Evaluation

Conservation of sandstone-based cultural heritage has attracted a great deal of interest. We propose herein a novel protecting strategy, via in situ fabrication of bentonite-based hydrogels (B-H) inside sandstones, where the bentonite-based hydrogels serve as the underlying cement. To create bentonite-based hydrogels with controllable structure, possessing good mechanical and anti-swelling properties, we have optimized forming time, appearance, and viscosity. The hydrogel precursor penetrated into the pores of the sandstone; the hydrogel would then form within 3-5 h. As found by employing a fluorescent tracer, the precursor remained controllably in place without any apparent change in the sandstone morphology. The bentonite-based hydrogels that formed inside the sandstones presented strong hydrogen bonding, coordination, and ionic bonding, as well as strong mechanical interlocking to the sandstone matrix. As a result, the sandstones possessed enhanced mechanical compressive strength and excellent resistance to acid, salt, and freeze-thaw cycles. Our approach provides for a non-destructive, eco-friendly, easy-to-use, and long-term strategy for cultural preservation, one with excellent protection effects.

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Application of dye saturated clay adsorbent from dyeing wastewater as textile printing pigment

Background

Adsorption by cheap materials (like clay and activated carbon) is one of the most effective methods for treating dye wastewaters, especially for cationic dyes. Although activated carbon has a black residue, the unique nanostructure of clay adsorbs dye molecules between its layers and produces a colored sludge. Dye intercalated clays were also introduced as possible coloring pigments. This work tries to combine the wastewater treatment and hybrid pigment production processes so that the remaining sludge of the process can be used as a printing pigment.

Results

Bentonite clay was examined for treating real dye wastewater from the textile industry containing four cationic dyes. The adsorption mechanism of all dyes was studied individually, and the results show that bentonite has a minimum adsorption capacity of 467 mg/g for Basic Red 46 dye based on the Langmuir model. The adsorption process decreased the turbidity by about 86% and reduced the total dissolved solids (TDS) and chemical oxygen demand (COD) of wastewater. The produced hybrid showed a nano‐layer structure according to the field emission scanning electron microscopy (FESEM). Differential thermal analysis (DTA) shows that the thermal stability of the pigment improved by about 30 °C compared to the pristine dye. Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) showed that the dye: bentonite ratio should be adjusted at a medium level to control the hydrophilicity of the hybrid and improve its miscibility in binders.

Conclusion

The produced pigment was printed on cotton fabric with a desirable visual color appearance and showed acceptable rubbing and light fastnesses. The result indicates that wastewater sludge from this adsorption process could be applicable as an industrial pigment. © 2022 Society of Chemical Industry (SCI).

Study of the Effectiveness of Alumina and HDTMA/Alumina Composite in the Removal of Para-Nitrophenol and the Deactivation of Bacterial Effect of Listeria monocytogenes and Salmonella spp

Removal of para-nitrophenol (p-NP) from an aqueous solution was studied under various batch adsorption experiments, using alumina (Al2O3) and its composite hexadecyltrimethylammonium bromide (HDTMA+-Br−) as adsorbents. These were later characterized, before and after adsorption of p-NP, by thermal analysis (DSC-TG), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and UV/Visible spectroscopies. The results show that HDTMA+/Al2O3 adsorbents have a greater affinity toward p-NP than Al2O3 alone. Linear and non-linear forms of kinetics and isotherms were used to analyze the experimental data obtained at different concentrations and temperatures. The results indicate that the pseudo-second order kinetic model provided the best fit to the experimental data for the adsorption of p-NP on both adsorbents, and that the intra-particle diffusion was not only the rate controlling step. Both the Langmuir and Redlich-Peterson (R-P) models were found to fit the sorption isotherm data well, but the Langmuir model was better. Physical adsorption of p-NP onto the adsorbents proved to be an endothermic and spontaneous process at high temperatures, which mainly involves a hydrogen bonding mechanism of interactions between p-NP and functional groups of adsorbents. The antibacterial activity of Al2O3, HDTMA+-Br− and HDTMA+/Al2O3 were evaluated against Listeria monocytogenes and Salmonella spp. strains using both disc diffusion and broth microdilution methods. The HDTMA+-Br− and HDTMA+/Al2O3 displayed a bacteriostatic effect against all tested strains of Listeria monocytogenes and Salmonella spp., while Al2O3 exhibited no bacterial effect against all bacterial strains tested.

Physico-chemical and electrostatic surface characterisation of mica mineral and its applicability on the adsorption of Safranin Orange and Reactive Black 5 dyes

ABSTRACTThe combined approach of specific surface area (SSA), porosity, microprobe analysis (EMPA), transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with EDX and infrared spectroscopy (FTIR) provided the mica mineral physico-chemical and morphological characterisation. The electrostatic surface properties were assessed through the determination of the Point of Zero Charge (pH_PZC) by the drift method and the electrokinetic mica mineral features represented by the Isoelectric Point (pH_IEP) which was carried out through zeta potential measurements. Adsorption tests were performed to correlate the surface charge behaviour of the mica mineral and its influence on the adsorption efficiency of two different dyes, namely: Safranin Orange (SO), as a cationic dye and Reactive Black 5 (RB5), as an anionic dye. The higher adsorption capacity SO dye was observed at pH 9 and achieved almost 83% of removal, while RB5 dye adsorption on mica surface had the highest result, about 45% of removal efficiency, on pH of 3. In both cases, the main mechanism identified that drove this results is the electrostatic force of attraction between the adsorbent edge surface charge (pH-dependent) and the ionic nature (anionic or cationic) of the pollutant dyes particles. The preliminary adsorption experiments demonstrated that the raw grounded mica mineral has a greater potential associated with its application on cationic dye removal in wastewater. The present study aimed to detail the main characteristics of the mica mineral in order to evaluate the potential use of such mineral residues in the removal efficiency of contaminated wastewater.

Rapid and efficient adsorption of methylene blue dye from aqueous solution by hierarchically porous, activated starbons®: Mechanism and porosity dependence

Hierarchically porous activated Starbons® derived from starch are found to make excellent adsorbents for methylene blue, even in the presence of other dyes and inorganic salts, highlighting their potential to be used in water purification. The optimal material (S950C90) has a methylene blue adsorption capacity (891 mg g^-1) almost nine times higher than that of unactivated S800 and four times higher than that of commercial activated carbon at 298 K. The adsorption of methylene blue onto optimal materials (S950C90 and S800K4) reaches equilibrium within 5 min. Adsorption data for all the adsorbents show a good fit to the Freundlich isotherm which allows the Gibbs free energies of adsorption to be calculated. The adsorption capacities increase as the pH of the methylene blue solution increases, allowing the dye to be desorbed by treatment with acidic ethanol and the Starbon® materials reused. Porosimetry and SEM-EDX imaging indicate that methylene blue adsorbs throughout the surface and completely fills all the micropores in the Starbon® adsorbent. The methylene blue adsorption capacities show excellent correlations with both the BET surface areas and the micropore volumes of the materials.

Green synthesis of P − ZrO2CeO2ZnO nanoparticles using leaf extracts of Flacourtia indica and their application for the photocatalytic degradation of a model toxic dye, Congo red

In the present work P−ZrO2CeO2ZnO nanoparticles were synthesised for the first time using phytochemical extracts from Flacourtia indica leaves and applied in the photocatalytic degradation of Congo Red in the presence of Light Emitting Diode warm white light. The photocatalytic degradation was optimized with respect to P−ZrO2CeO2ZnO nanoparticle dosage, initial Congo Red concentration, and degradation time. The optimum conditions for P−ZrO2CeO2ZnO nanoparticle synthesis was pH 9, leaves extracts of F. indica dosage 4 g 100 mL⁻¹, Zirconia, Cerium and Zinc metal ion concentration 0.05 mg/L and metal ion to plant volume ratio of 1:4. The leaves extract dosage, pH and metal concentration had the most significant effects on the synthesis of the nanoparticles. The nanoparticles followed type III physisorption adsorption isotherms with surface area of 0.4593 m³g⁻¹, pore size of 6.80 nm, pore volume 0.000734 cmg−13 and average nanoparticle size 0.255 nm. A degradation efficiency of 86% was achieved and the optimum degradation conditions were 0.05 g/L of P−ZrO2CeO2ZnO nanoparticle dosage, 10 mg/L initial Congo red concentration, and 250 minutes irradiation time. Data from kinetic studies showed that the degradation followed pseudo first order kinetics at low concentration, with a rate constant of 0.069 min⁻¹. The superoxide, h+ holes and light were the main determinants of the reaction mechanisms for the degradation of Congo Red. The investigation outcomes demonstrated that P−ZrO2CeO2ZnO nanoparticles offer a high potential for photocatalytic degradation of Congo Red.

•

The most significant factors on P−ZrO2CeO2ZnO nanoparticles synthesis were plant leaves dosage, pH and initial metal concentration.

•

The nanoparticles exhibited high catalytic activity towards photocatalytic degradation of Congo red.

•

Superoxide, h+ holes and light were the main determinants of the photocatalytic degradation mechanisms.

Investigation on the feasibility of recycled polyvinylidene difluoride polymer from used membranes for removal of methylene blue: experimental and DFT studies

This study reports the feasibility of recycled polyvinylidene difluoride (PVDF) beads to decolourize methylene blue (MB) from aqueous streams. The beads were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FT-IR) for its morphological and structural analysis. The effect of various process parameters such as adsorbent dose, initial concentration, contact time, and pH was studied. The first principle density functional theory (DFT) calculations were performed to investigate the underlying mechanism behind the adsorption process. The MB dye adsorption on recycled PVDF beads followed the pseudo-second-order kinetics and Langmuir isotherm, indicating the adsorption was chemical and monolayer. The maximum adsorption capacity obtained was 27.86 mg g^-1. The adsorption energy of MB-PVDF predicted from the DFT study was -64.7 kJ mol^-1. The HOMO-LUMO energy gap of PVDF decreased from 9.42 eV to 0.50 eV upon interaction with MB dye due to the mixing of molecular orbitals. The DFT simulations showed that the interaction of the MB dye molecule was from the electronegative N atom of the MB dye molecule, implying that electrostatic interactions occurred between the recycled PVDF beads and the positively charged quaternary ammonium groups in MB dye. The present study demonstrates the potential of recycled PVDF beads for a low-cost dye removal technique from textile wastewater.

Novel aspartic-based bio-MOF adsorbent for effective anionic dye decontamination from polluted water

In this study, a cost-effective powdered Zn l-aspartic acid bio-metal organic framework (Zn l-Asp bio-MOF) was reported as an efficient adsorbent for Direct Red 81 (DR-81) as an anionic organic dye. The prepared bio-MOF was characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), field emission transmission electron microscopy (FETEM), surface area analysis (BET), and thermal gravimetrical analysis (TGA). The resulting bio-MOF has a large surface area (180.43 m2 g-1) and large mesopore volume (0.144 cm3 g-1), as well as good chemical inertness and mechanical stability. The optimum dosage from the Zn l-Asp bio-MOF was 1.0 g L-1 at pH = 7 for 95.3% adsorption of 10 ppm DR-81 after 45 min. Thermodynamic analysis results demonstrated that the decontamination processes were done with spontaneous, thermodynamically, and exothermic nature onto the fabricated bio-MOF. Kinetic parameters were well-fitted with pseudo-second-order kinetics, and the adsorption process was described by the Freundlich isotherm. The adsorption data proved that Zn l-Asp bio-MOF is an effective adsorbent for DR-81 from aqueous solutions with high stability and recycling ability for eight cycles, as well as the easy regeneration of the sorbent.

Characterization and Evaluation of Natural Bearing and Iron-Enriched Montmorillonitic Clay as Catalysts for Wet Oxidation of Dye-Containing Wastewaters

Natural bearing (raw and calcined at 500 °C) and iron-enriched (impregnation and pillaring) montmorillonitic clay samples were prepared. The obtained samples were characterized (X-ray diffraction, Fourier Transformed Infrared Spectroscopy, Scanning Electron Microscopy, and Energy Dispersive X-ray Spectroscopy) and evaluated as catalysts in catalytic wet oxidation of Brilliant Green and Crystal Violet. Experiments were conducted in the same conditions (0.5 g catalysts, 300 mL air/min or 0.5 mL H2O2, 25 mL of dye solution, 25 °C, initial solution pH = 6.0, for 3 h) in thermostated batch reaction tubes. Process evolution was followed using UV-Vis spectrometry (200–1100 cm−1) and total organic carbon. Dye removal efficiencies (decolorization) between 98 and 99% were determined, while total organic carbon removal efficiencies were calculated to be in the 53–98% range. Iron leakage investigation showed that iron is lost in higher amounts for the catalysts prepared using the impregnation method by comparison with the pillared sample.

3-Aminopropyl-triethoxysilane-Functionalized Tannin-Rich Grape Biomass for the Adsorption of Methyl Orange Dye: Synthesis, Characterization, and the Adsorption Mechanism

A biomass amino silica-functionalized material was successfully prepared by a simple sol-gel method. 3-Aminopropyltriethoxysilane (APTES) was added to a tannin-rich grape residue to improve its physicochemical properties and enhance the adsorption performance. The APTES functionalization led to significant changes in the material's characteristics. The functionalized material was efficiently applied in the removal of methyl orange (MO) due to its unique characteristics, such as an abundance of functional groups on its surface. The adsorption process suggests that the electrostatic interactions were the main acting mechanism of the MO dye removal, although other interactions can also take place. The functionalized biomass achieved a very high MO dye maximum adsorption capacity (Q _max) of 361.8 mg g^-1. The temperature positively affected the MO removal, and the thermodynamic studies indicated that the adsorption of MO onto APTES-functionalized biomass was spontaneous and endothermic, and enthalpy is driven in the physisorption mode. The regeneration performance revealed that the APTES-functionalized biomass material could be easily recycled and reused by maintaining very good performance even after five cycles. The adsorbent material was also employed to treat two simulated dye house effluents, which showed 48% removal. At last, the APTES biomass-based material may find significant applications as a multifunctional adsorbent and can be used further to separate pollutants from wastewater.

A review of avocado waste-derived adsorbents: Characterizations, adsorption characteristics, and surface mechanism

Avocado is one of the most important fruits with a high nutritional content; this fruit is consumed and cultivated worldwide. It is originally grown in Central America and the West Indies islands. But it is now cultivated in the tropical and subtropical regions of the world. Avocado waste is an abundantly available raw material that can be converted into adsorbents to remove different pollutants from aqueous solutions. This review article explores the utilization of avocado waste as raw material to develop an efficient adsorbent and its use against various toxicants. Many research papers have been published on the use of avocado waste-derived adsorbents in the recent past. The factors that affect the adsorption processes are examined in light of published references. Some critical adsorption parameters, such as equilibrium (isotherms), kinetics, and thermodynamics, have been reported in the published literature; these parameters and their data are critically discussed. The characterization, mechanism, and surface chemistry of avocado waste-derived adsorbents are also discussed. To date, no review article on avocado waste-derived adsorbents is available, where researchers can get an overview of the preparation, characterization, and adsorption attributes of avocado waste adsorbents against various pollutants. Recent literature demonstrates the effective utilization of avocado waste as a cleaner and sustainable raw material for the production of adsorbents.

Adsorption behaviour of pollutants: Heavy metals, radionuclides, organic pollutants, on clays and their minerals (raw, modified and treated): A review

The increasing anthropogenic pressure results in environmental pollution and thus adversely affects the integrity of ecosystems. Consequently, various methods of removing pollutants from effluents have been developed and used to minimise this negative impact, with adsorption on clay minerals identified as the most promising approach. This review examines the adsorption of heavy metals, radionuclides, and organic pollutants on clays/clay minerals and their composites under diverse conditions and deals with the applications of these materials in the construction of engineering barriers for waste management. Additionally, we discuss the efficiency and mechanisms of pollutant adsorption on clays subjected to various treatments and modifications while describing the beneficial effects of such modification/treatment on adsorption performance, reusability, and in vivo/in vitro toxicity.

Adsorptive removal of organic dyes via porous materials for wastewater treatment in recent decades: A review on species, mechanisms and perspectives

Organic dyes, a type of high toxic and carcinogenic chemicals that present severe threats to human and aquatic life, are the most commonly seen organic pollutants in wastewater of industries such as textile, rubber, cosmetic industry etc. Various techniques for the removal of dyes are compared in this review. Adsorption has proven to be a facile and promising approach for the removal of dyes in wastewater. This work focuses on the latest development of various porous materials for the adsorption of organic dyes. The characteristics, functionalization and modification of different porous materials are also presented. Furthermore, adsorption behaviors and mechanism of these adsorbents in the adsorption of organic dyes are critically reviewed. Finally, challenges and opportunities for future research in the development of novel materials for the highly efficient removal of dyes are proposed.