A review of analytical procedures for the simultaneous determination of medically important veterinary antibiotics in environmental water: Sample preparation, liquid chromatography, and mass spectrometry

Degradation pathways of sulfamethoxazole under phototransformation processes: A data base of the major transformation products for their environmental monitoring

Sulfamethoxazole (SMX) is frequently detected in wastewater and aquatic environments worldwide at concentrations from ng L-1 to μg L-1. Unfortunately, SMX is not completely removed in municipal wastewater treatment plants (WWTPs), thus, SMX and their transformation products (TPs) are discharged into aquatic environments, where can be transformed by phototransformation reactions. In this study, the phototransformation of SMX as well as generation of their major TPs under photolysis and photocatalysis processes was reviewed. SMX can be totally removed under photolysis and photocatalysis processes in aqueous solutions using simulated or natural radiation. Degradation pathways such as isomerization, hydroxylation, fragmentation, nitration, and substitution reactions were identified during the generation of the major TPs of SMX. Particularly, 26 TPs were considered for the creation of a data base of the major TPs of SMX generated under phototransformation processes. These 26 compounds could be used as reference during the SMX monitoring both wastewater and water bodies, using analytic methodologies such as target analysis and suspect screening. A data base of the major TPs of pharmaceuticals active compounds (PhACs) as SMX could help to implementation of best environmental monitoring programs for the study of the environmental risks both PhACs and their TPs with highest occurrence in aquatic environments.

Covalent-Organic Frameworks for Selective and Sensitive Detection of Antibiotics from Water

As the consumption of antibiotics rises, they have generated some negative impacts on organisms and the environment because they are often unable to be effectively degraded, and seeking effective detection methods is currently a challenge. Covalent-organic frameworks (COFs) are new types of crystalline porous crystals created based on the strong covalent interactions between blocked monomers, and COFs demonstrate great potential in the detection of antibiotics from aqueous solutions because of their large surface area, adjustable porosity, recyclability, and predictable structure. This review aims to present state-of-the-art insights into COFs (properties, classification, synthesis methods, and functionalization). The key mechanisms for the detection of antibiotics and the application performance of COFs in the detection of antibiotics from water are also discussed, followed by the challenges and opportunities for COFs in future research.

Overlooked interconversion between tetracyclines and their 4-epimers in soil and effects on soil resistome and bacterial community

With the widespread use of tetracycline antibiotics (TCs) and the application of manure fertilizer in farmland, TCs and their metabolites especially 4-epimers have been heavily detected in agricultural soil. However, existing studies have focused on the residual and environmental behavior of maternal TCs, and few studies have looked at the ecotoxicity of their 4-epimers in soil. In this study, the degradation and interconversion of tetracycline (TC), oxytetracycline (OTC) and their 4-epimers (4-epitetracycline, ETC; 4-epioxytetracycline, OTC) were revealed. Their effects on antibiotic resistance genes (ARGs), mobile genetic elements (MGEs) and bacterial community in soil were also investigated in comparison. The results showed that the 4-epimers could be substantially transformed to their parents and degraded as a whole. The degradation rates of four selected pollutants are followed: TC > OTC > ETC > EOTC. This indicated that when TCs entered the soil, part of TCs transformed into slower-degraded 4-epimers, and these 4-epimers could also be converted back to their antibiotic parents, causing the long-term residue of TCs in soil. When added to the soil alone, TC and OTC significantly promoted the proliferation of most ARGs and MGEs, among them, trb-C, IS1247 and IS1111 were the top three genes in abundance. ETC and EOTC had little effect at the beginning. However, as the 4-epimers continuously converted into their parents after one month of cultivation, ETC and EOTC treatments showed similar promoting effect on ARGs and MGEs, indicating that the effect of ETC and EOTC on soil resistome was lagged and mainly caused by their transformed parents. Nocardioides, unclassified_Rhizobiaceae, norank_Sericytochromatia, Microlunatus, Solirubrobacter and norank_67-14 were the most frequent hosts of ARGs, Most of which belong to the phylum Actinobacteria. Due to their large transformation to TCs, slow degradation rate and potential effects on soil microbes and ARGs, the harm of TCs' 4-epimers on soil ecosystem cannot be ignored.

For the occurrence of PPCPs from source to tap: A novel approach modified in terms of sample preservation and SPE cartridge to monitor PPCPs in our water supply

BACKGROUND

The ongoing infusion of pharmaceutical and personal care products (PPCPs) into ecosystems sustains a perpetual life cycle and leads to multi-generational exposures. Limited understanding of their environmental impact and their intrinsic ability to induce physiological effect in humans, even at low doses, pose great risks to human health. Few scholarly works have conducted systematic research into the occurrence of PPCPs within potable water systems. Concurrently, the associated monitoring techniques have not been comprehensively examined with regards to the specific nature of drinking water, namely whether the significant presence of disinfectants may influence the detection of PPCPs.

RESULTS

A modified approach in terms of detailed investigation of sample preservation and optimization of an in-lab fabricated solid phase extraction (SPE) cartridge filled with DVB-VP and PS-DVB sorbent was proposed. Favorable methodological parameters were achieved, with correlation coefficients spanning from 0.9866 to 0.9998. The LODs of the PPCPs fluctuated from 0.001 to 2 μg L-1, while the LOQs varied from 0.002 to 5 μg L-1. The analysis of spiked samples disclosed a methodological precision of 2.31-9.86 % and a recovery of 52.4-119 %. We utilized the established method for analyzing 14 water samples of three categories (source water, finished water and tap water) from five centralized water supply plants. A total of 24 categories encompassing 72 PPCPs were detected, with the concentrations of PPCPs manifested a marked decrease from source water to finished water and finally to tap water.

SIGNIFICANCE

Our research meticulously examined the enhancement and purification effects of widely used commercial SPE cartridges and suggested the use of in-lab fabricated SPE cartridges packed with DVB-VP and PS-DVB adsorbents. We also conducted a systematic evaluation of the need to incorporate ascorbic acid and sodium thiosulfate as preservatives for PPCP measurement, in consideration of the unique characteristics of drinking water matrices, specifically, the significant concentration levels of disinfectants. Furthermore, the proposed method was effectively employed to study the presence of PPCPs in source water, finished water, and tap water collected from centralized water supply plants.

Stability Studies of the Dilution Series of Different Antibiotic Stock Solutions in Culture Medium Incubated at 37 °C

The long-term stability of antibiotics in culture media remains underexplored in scientific literature. This study evaluated the stability of eight distinct antibiotic stock solutions-amoxicillin, cefotaxime, neomycin, oxytetracycline, florfenicol, enrofloxacin, colistin, and potentiated sulfonamide-and their 10-fold dilution series in tryptone soy broth (TSB) at 37 °C, over 12 days. Samples were collected immediately after preparation and on days 1, 2, 5, 7, 9, and 12, with active substance concentrations measured using ultra-high-performance liquid chromatography (UHPLC) coupled with mass spectrometry. The results indicated that among the ultrapure water stock solutions, neomycin, florfenicol, and potentiated sulfonamide maintained stability (>95%). Within the culture medium, florfenicol showed consistent stability (100%) throughout the study, potentiated sulfonamide experienced minor degradation (>85%), and neomycin underwent significant degradation. Amoxicillin, oxytetracycline, and colistin displayed considerable degradation in both solution types but were more stable in ultrapure water solutions. The stability of cefotaxime and enrofloxacin in ultrapure water solutions and in the medium was very similar when compared; however, 3.6% of the former and 88.7% of the latter remained detectable by day 12. These findings are crucial for minimum inhibitory concentration (MIC) assessments, especially in minimum bactericidal concentration (MBC) studies, and in experiments concerning long-term evolution and co-selection. This study underscores the necessity of stability assessments in culture media to validate future experimental outcomes.

Hydroxylated transformation products of pharmaceutical active compounds: Generation from processes used in wastewater treatment plants and its environmental monitoring

Pharmaceutical active compounds (PhACs) are organic pollutants detected in wastewater and aquatic environments worldwide in concentrations ranging from ng L-1 to μg L-1. Wastewater effluents containing PhACs residues is discharged in municipal sewage and, subsequently collected in municipal wastewater treatment plants (WWTPs) where are not entirely removed. Thus, PhACs and its transformation products (TPs) are discharged into water bodies. In the current work, the transformation of PhACs under treatments used in municipal WWTPs such as biological, photolysis, chlorination, and ozonation processes was reviewed. Data set of the major transformation pathways were obtained of studies that performed the PhACs removal and TPs monitoring during batch-scale experiments using gas and liquid chromatography coupled with tandem mass spectrometry (GC/LC-MS/MS). Several transformation pathways as dealkylation, hydroxylation, oxidation, acetylation, aromatic ring opening, chlorination, dehalogenation, photo-substitution, and ozone attack reactions were identified during the transformation of PhACs. Especially, hydroxylation reaction was identified as transformation pathway in all the processes. During the elucidation of hydroxylated TPs several isobaric compounds as monohydroxylated and dihydroxylated were identified. However, hydroxylated TPs monitoring in wastewater and aquatic environments is a topic scarcely studied due to that has no environmental significance, lack of available analytic standars of hydroxylated TPs and lack of analytic methods for their identification. Thus, screening strategy for environmental monitoring of hydroxylated TPs was proposed through target and suspect screening using GC/LC-MS/MS systems. In the next years, more studies on the hydroxylated TPs monitoring are necessary for its detection in WWTPs effluents as well as studies on their environmental effects in aquatic environments.

Persistence and potential risks of tetracyclines and their transformation products in two typical different animal manure composting treatments

Abundant residues of tetracyclines in animal manures and manure-derived organic fertilizers can pose a substantial risk to environments. However, our knowledge on the residual levels and potential risk of tetracyclines and their transformation products (TPs) in manure and manure-derived organic fertilizers produced by different composting treatments is still limited. Herein, the occurrence and distribution of four veterinary tetracyclines (tetracycline, oxytetracycline, chlortetracycline, and doxycycline) and ten of their TPs were investigated in paired samples of fresh manure and manure-derived organic fertilizers. Tetracyclines and TPs were frequently detected in manure and manure-derived organic fertilizer samples in ranging from 130 to 118,137 μg·kg-1 and 54.6 to 104,891 μg·kg-1, respectively. Notably, the TPs concentrations of tetracycline and chlortetracycline were comparable to those of the parent compounds, with 4-epimers being always dominant and retained antibacterial potency. Based on paired-sampling strategy, the removal efficiency of tetracyclines and TPs in thermophilic composting was higher than that in manure storage. Toxicological data in the soil environment and the data derived from equilibrium partitioning method, indicated that tetracyclines and some TPs like 4-epitetracycline, 4-epichlortetracycline and isochlortetracycline could pose median to high ecological risk to terrestrial organisms. Total concentrations of TPs in manure-derived organic fertilizers were significantly correlated with the absolute abundance of tet(X) family genes, which provide evidence to evaluate the effects of TPs on the levels of antibiotic resistance in the environment. Among them, the 4-epitetracycline could pose ecological risk and retain antibacterial potency. Our findings emphasize the importance of monitoring and controlling the prevalence of tetracyclines and their TPs in livestock-related environments.

A whole-cell hypersensitive biosensor for beta-lactams based on the AmpR-AmpC regulatory circuit from the Antarctic Pseudomonas sp. IB20

Detecting antibiotic residues is vital to minimize their impact. Yet, existing methods are complex and costly. Biosensors offer an alternative. While many biosensors detect various antibiotics, specific ones for beta-lactams are lacking. To address this gap, a biosensor based on the AmpC beta-lactamase regulation system (ampR-ampC) from Pseudomonas sp. IB20, an Antarctic isolate, was developed in this study. The AmpR-AmpC system is well-conserved in the genus Pseudomonas and has been extensively studied for its involvement in peptidoglycan recycling and beta-lactam resistance. To create the biosensor, the ampC coding sequence was replaced with the mCherry fluorescent protein as a reporter, resulting in a transcriptional fusion. This construct was then inserted into Escherichia coli SN0301, a beta-lactam hypersensitive strain, generating a whole-cell biosensor. The biosensor demonstrated dose-dependent detection of penicillins, cephalosporins and carbapenems. However, the most interesting aspect of this work is the high sensitivity presented by the biosensor in the detection of carbapenems, as it was able to detect 8 pg/mL of meropenem and 40 pg/mL of imipenem and reach levels of 1-10 ng/mL for penicillins and cephalosporins. This makes the biosensor a powerful tool for the detection of beta-lactam antibiotics, specifically carbapenems, in different matrices.

Nanomaterial-based fluorescent biosensors for the detection of antibiotics in foodstuffs: A review

Antibiotics are widely used as bacteriostatic or bactericidal agents against various microbial infections in humans and animals. The excessive use of antibiotics has led to an accumulation of their residues in food products, which ultimately poses a threat to human health. In light of the shortcomings of conventional methods for antibiotic detection (primarily cost, proficiency, and time-consuming procedures), the development of robust, accurate, on-site, and sensitive technologies for antibiotic detection in foodstuffs is important. Nanomaterials with amazing optical properties are promising materials for developing the next generation of fluorescent sensors. In this article, advances in detecting antibiotics in food products are discussed with respect to their sensing applications, with a focus on fluorescent nanomaterials such as metallic nanoparticles, upconversion nanoparticles, quantum dots, carbon-based nanomaterials, and metal-organic frameworks. Furthermore, their performance is evaluated to promote the continuation of technical advances.

Impacts of garbage classification and disposal on the occurrence of pharmaceutical and personal care products in municipal solid waste leachates: A case study in Shanghai

Leachate generated during the treatment and disposal of municipal solid wastes (MSWs) can be an important source of pharmaceutical and personal care products (PPCPs) in the environment. With the implementation of garbage classification policy in China, the disposal methods of MSWs have changed, while its impacts on the occurrence of PPCPs in the generated leachate remain unknown. In this study, we investigated 49 target PPCPs in the leachates of classified MSWs, i.e. residual waste leachate (RWL) and food waste leachate (FWL), and revealed the influence of garbage classification implementation on the occurrence of PPCPs in leachates to be treated. The results showed the concentration and mass load of target PPCPs in the RWL samples (median values: 34.9 ng/L and 52.3 mg/d, respectively) were significantly higher than those in the FWL samples (median values: 19.3 ng/L and 14.5 mg/d, respectively). Macrolide (ML) antibiotics were the predominant PPCPs in the RWL samples, while in the FWL samples, quinolone (QL) antibiotics exhibited the highest concentration and mass load. The implementation of garbage classification policy led to the reduction of PPCP mass load (from 739 g/d to 262 g/d) in leachates to be treated. The findings are helpful for better designing or managing MSW treatment and disposal processes to minimize the emission of PPCPs from MSW leachates.

Occurrence and Distribution of Antibiotics in a Tropical Mariculture Area of Hainan, China: Implications for Risk Assessment and Management

With the rapid global demand for mariculture products in recent years, the use of antibiotics has increased intensively in the mariculture area. Current research on antibiotic residues in mariculture environments is limited, and less information is available on the presence of antibiotics in tropical waters, limiting a comprehensive understanding of their environmental presence and risk. Therefore, this study investigated the environmental occurrence and distribution of 50 antibiotics in the near-shore aquaculture waters of Fengjia Bay. A total of 21 antibiotics were detected in 12 sampling sites, including 11 quinolones, 5 sulfonamides, 4 tetracyclines, and 1 chloramphenicol; the quinolones pyrimethamine (PIP), delafloxacin (DAN), flurofloxacin (FLE), ciprofloxacin (CIP), norfloxacin (NOR), pefloxacin (PEF), enrofloxacin (ENO), and minocycline (MNO) of the tetracycline class were detected in all sampling points. The total antibiotic residue concentrations in the study area ranged from 153.6 to 1550.8 ng/L, the tetracycline antibiotics were detected in the range of 10 to 1344.7 ng/L, and the chloramphenicol antibiotics were detected in the range of 0 to 106.9 ng/L. The detected concentrations of quinolones ranged from 81.3 to 136.1 ng/L, and the residual concentrations of sulfonamide antibiotics ranged from 0 to 313.7 ng/L. The correlation analysis with environmental factors revealed that pH, temperature, conductivity, salinity, NH^3--N, and total phosphorus had a strong correlation with antibiotics. Based on PCA analysis, the main sources of antibiotic pollution in the area were determined to be the discharge of farming wastewater and domestic sewage. The ecological risk assessment indicated that the residual antibiotics in the water environment of the near-shore waters of Fengjiawan had certain risks to the ecosystem. Among them, CIP, NOR, sulfamethoxazole (TMP), ofloxacin (OFL), enrofloxacin (ENO), sulfamethoxazole (SMX), and FLE showed medium to high risk. Therefore, it is recommended to regulate the use of these antibiotics and the discharge and treatment of culturing wastewater, and measures should be taken to reduce the environmental pollution caused by antibiotics and to monitor the long-term ecological risk of antibiotics in the region. Overall, our results provide an important reference for understanding the distribution and ecological risk of antibiotics in Fengjiawan.

Distribution and risk assessment of antibiotics under water level fluctuation in the riparian zone of the Hanjiang River

The riparian zone (RZ) is an important region connecting surface water and groundwater, and it has widely been acknowledged for its pollutant buffering capacity. However, the decontaminating effect of RZ on trace organic compounds such as antibiotics has received little attention. This study explored the distribution of 21 antibiotics and 4 sulfonamide metabolites in river water and groundwater in the lower reaches of the Hanjiang River. The diffusion and exchange of contaminants between the river and riverbanks under the influence of water conservancy projects (Xinglong Dam and the Yangtze-Hanjiang Water Diversion Project) were investigated. Macrolide antibiotics were prevalent in river water (62.5-100%) and groundwater samples (42.9-80.4%). Ofloxacin and chlortetracycline were detected with the highest concentrations in river water (12.2 ng L^-1) and groundwater (9.3 ng L^-1) respectively. Higher levels of antibiotics were observed in spring and winter than in other seasons. The river-groundwater interaction has a certain interception effect on antibiotics, especially near riverbanks. Redox sensitive element Fe²⁺ showed significantly positive correlations with some tetracycline and macrolide antibiotics (p < 0.05), and thus the migration mechanism between Fe²⁺ and antibiotics under the condition of redox change should be investigated further. Environmental risks posed by antibiotics were assessed for algae, daphnids, and fish in surface water and groundwater. Only clarithromycin and chlortetracycline presented a medium risk to algae (0.1 < RQ < 1), and the rest presented low risk (RQ < 0.1). Nevertheless, the risk range may be further extended by interactions between groundwater and surface water. Accurate understanding of antibiotic transport in RZ is critical for developing management strategies aimed at reducing the pollution load on the watershed.

Group-targeting sulfonamides via an evanescent-wave biosensor based on rational designed coating antigen

In order to effectively monitor a wide variety of sulfonamides residues in the environment, group-targeting immunoassay based on the group-specific antibodies has attracted great attentions, which can realize the detection of a group of contaminants in environment as many as possible even the unrecognized ones. Indirect competitive immunoassay is generally adopted for small molecule detection however the rational design of immobilized coating antigen for improved recognition capability on the solid surface is far from enough. To cover the research gap, we proposed the design criteria of coating antigen for surface-based indirect competitive immunoassay based on the molecular docking. Taking the group-specific antibodies against sulfonamides (SA) as a proof-of-concept, a hapten with a linking arm with 3 methyl groups was selected to synthesize the coating antigen. Through surface immobilization of coating antigen, a portable biosensor for group-targeting immunoassay of sulfonamides was developed and demonstrated excellent performance with detection limits lower than 0.6 μg/L for four SA variants, and the cross-reactivities of 148-215 % relative to sulfadiazine. The recovery rates of SAs in liquid milk ranges from 87 to 97 %, which confirmed the application potential of this method in the determination of SAs. Its capability to measure total SAs in a simple and low-cost way would pave the way for a variety of application fields.

Analytical key issues and challenges in the LC-MS/MS determination of antibiotics in wastewater

The research on antibiotics occurrence in the aquatic environment has become a hot topic in the last years due to their potential negative effects, associated to possible bacterial antibiotic-resistance, after continuous exposure to these compounds. Most of antibiotic residues are not completely removed in the wastewater treatment plants (WWTPs) and end up in the aquatic environment through treated wastewater (WW). The development of reliable analytical methodologies for the determination of antibiotics in influent (IWW) and effluent wastewater (EWW) is needed with different purposes, among others: monitoring their occurrence in the aquatic environment, performing environmental risk assessment, estimating removal efficiencies of WWTPs, or estimating the consumption of these compounds. In this paper, we perform an in-depth investigation on analytical key issues that pose difficulties in the determination of antibiotics in complex matrices, such as WW, and we identify challenges to be properly addressed for successful analysis. The analytical technique selected was liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS), as it is the most powerful and widely applied at present for antibiotic residues determination. The mass spectrometric behavior of 18 selected antibiotics, the chromatographic performance, ion ratio variations associated to the sample matrix when using different precursor ions or protomers, and the macrolides adsorption to glass vial, were some of the issues studied in this work. On the basis of the detailed study performed, an analytical LC-MS/MS method based on sample direct injection has been developed for quantification of 18 antibiotics in IWW and EWW, allowing their determination at low ng L^-1 levels.

Development and validation of a sensitive LC-MS/MS method for determination of intracellular concentration of fluconazole in Candida albicans

Systemic candidiasis is the fourth leading cause of healthcare-associated infections worldwide. The combination therapy based on existing antifungal agents is well-established to overcome drug resistance and restore antifungal efficacy against drug-resistant strains. In this study, a simple and sensitive liquid chromatography with tandem mass spectrometry (LC-MS/MS) method was developed to quantify the intracellular fluconazole (FLC) content in the opportunistic human fungal pathogen Candida albicans. The cell lysates were prepared by lysing C. albicans cells with Precellys homogenizers and FLC was extracted with methylene chloride. The entire extraction approach was simple, precise and reliable. The extracts were separated on a Zorbax SB-C18 column using a mobile phase of acetonitrile (solvent A) and deionized water plus 0.1% formic acid. FLC and ketoconazole (KCZ, internal standard) were monitored in positive mode using electrospray ionization source. The multiple reaction monitoring transitions (precursor to product) were monitored for FLC m/z 307.1 → 238.2 and for the internal standard KCZ m/z 531.2 → 489.1. The linear for this method were in the range from 5.0 to 1000.0 ng/mL. The precision and accuracy of the samples were relative standard deviations (RSD) < 1.0% for intra-day and RSD < 0.51% for inter-day. The overall recovery of FLC from samples was higher than 77.61%. Furthermore, this method was successfully applied and validated in 36 clinical isolated strains. Taken together, we established a highly accurate, efficient, and reproducible method for quantifying the intracellular content of FLC in C. albicans.

Visible-Light-Driven Photocatalytic Degradation of Tetracycline Using Heterostructured Cu2O-TiO2 Nanotubes, Kinetics, and Toxicity Evaluation of Degraded Products on Cell Lines

This study first reports on the tetracycline photodegradation with the synthesized heterostructured titanium oxide nanotubes coupled with cuprous oxide photocatalyst. The large surface area and more active sites on TiO₂ nanotubes with a reduced band gap (coupling of Cu₂O) provide faster photodegradation of tetracycline under visible light conditions. Cytotoxicity experiments performed on the RAW 264.7 (mouse macrophage) and THP-1 (human monocytes) cell lines of tetracycline and the photodegraded products of tetracycline as well as quenching experiments were also performed. The effects of different parameters like pH, photocatalyst loading concentration, cuprous oxide concentration, and tetracycline load on the photodegradation rate were investigated. With an enhanced surface area of nanotubes and a reduced band gap of 2.58 eV, 1.5 g/L concentration of 10% C-TAC showed the highest efficiency of visible-light-driven photodegradation (∼100% photodegradation rate in 60 min) of tetracycline at pH 5, 7, and 9. The photodegradation efficiency is not depleted up to five consecutive batch cycles. Quenching experiments confirmed that superoxide radicals and hydroxyl radicals are the most involved reactive species in the photodegradation of tetracycline, while valance band electrons are the least involved reactive species. The cytotoxicity percentage of tetracycline and its degraded products on RAW 264.7 (-0.932) as well as THP-1 (-0.931) showed a negative correlation with the degradation percentage with a p-value of 0.01. The toxicity-free effluent of photodegradation suggests the application of the synthesized photocatalyst in wastewater treatment.

Construction of Electrochemical Sensors for Antibiotic Detection Based on Carbon Nanocomposites

Excessive antibiotic residues in food can cause detrimental effects on human health. The establishment of rapid, sensitive, selective, and reliable methods for the detection of antibiotics is highly in demand. With the inherent advantages of high sensitivity, rapid analysis time, and facile miniaturization, the electrochemical sensors have great potential in the detection of antibiotics. The electrochemical platforms comprising carbon nanomaterials (CNMs) have been proposed to detect antibiotic residues. Notably, with the introduction of functional CNMs, the performance of electrochemical sensors can be bolstered. This review first presents the significance of functional CNMs in the detection of antibiotics. Subsequently, we provide an overview of the applications for detection by enhancing the electrochemical behaviour of the antibiotic, as well as a brief overview of the application of recognition elements to detect antibiotics. Finally, the trend and the current challenges of electrochemical sensors based on CNMs in the detection of antibiotics is outlined.

Determination of quinolone antibiotics in environmental water using automatic solid-phase extraction and isotope dilution ultra-performance liquid chromatography tandem mass spectrometry

The widespread use of quinolones in humans and animals has become a major threat to public health. In this study, a simple, rapid, sensitive, and high throughput method based on automatic solid-phase extraction and isotope dilution ultra-performance liquid chromatography tandem mass spectrometry was described for the determination of trace quinolones in environmental water. The proposed automated solid-phase extraction method was initially optimized, and the optimum experimental conditions found were 1 L water sample with 0.5 g/L Na₂EDTA (pH 3) extracted and enriched by CNW Poly-Sery HLB cartridge at a flow rate of 50 mL/min and eluted by 8 mL of methanol. The linearity of the method ranged from 0.05 to 100 μg/L for 15 quinolones, with correlation coefficients ranging from 0.9993 to 0.9999. The limits of detection were in the low ng/L level, ranging from 0.005 to 0.051 ng/L. Finally, the optimized method was applied for determining trace levels of 15 quinolones in Wahaha pure water, tap water, river water, and seawater samples with good recoveries of 93 %-119 % and satisfactory relative standard deviations of 0.1 %-13.9 %. Fourteen quinolones were detected, and ofloxacin was the predominant congener in river water and seawater.

Natural Materials Modified and Applied to the Detection of Drugs In Situ: Modification of Eggshell and Quantification of Oxytetracycline

This work describes a novel sensing system using eggshells as substrate for the first time, targeting the detection and semiquantitative determination of antibiotics in waters from aquaculture, enabling simple, inexpensive, and in situ drug monitoring. Eggshell was ground and the resulting powder was modified by adsorption of suitable reagents, and it takes a typical colour after contact with the antibiotic. The colour intensity is correlated with the concentration of the antibiotic. This novel approach was applied to oxytetracycline, one of the antibiotics commonly used in aquaculture. The chemical changes on the eggshell powder were evaluated and optimised to produce an intense colour change as a function of the concentration of the antibiotic. The colour changes were evaluated by visual comparison with images taken with a digital camera, applying an appropriate mathematical treatment to the colour coordinates of the HSL system used by Windows. The selectivity of the response was tested against other antibiotic drugs. The materials were also used in the analysis of a spiked environmental water sample. Overall, this work presents a rapid, inexpensive, simple and equipment-free method for screening and discrimination of tetracycline drugs in aquaculture. The method is a green approach by reusing eggshells and decreasing the level of contamination correlated to analytical methods, thus being a promising tool for local, rapid, and cost-effective antibiotic monitoring.

Uptake of Pharmaceutical Pollutants and Their Metabolites from Soil Fertilized with Manure to Parsley Tissues

Manure is a major source of soil and plant contamination with veterinary drugs residues. The aim of this study was to evaluate the uptake of 14 veterinary pharmaceuticals by parsley from soil fertilized with manure. Pharmaceutical content was determined in roots and leaves. Liquid chromatography coupled with tandem mass spectrometry was used for targeted analysis. Screening analysis was performed to identify transformation products in the parsley tissues. A solid-liquid extraction procedure was developed combined with solid-phase extraction, providing recoveries of 61.9–97.1% for leaves and 51.7–95.6% for roots. Four analytes were detected in parsley: enrofloxacin, tylosin, sulfamethoxazole, and doxycycline. Enrofloxacin was detected at the highest concentrations (13.4–26.3 ng g⁻¹). Doxycycline accumulated mainly in the roots, tylosin in the leaves, and sulfamethoxazole was found in both tissues. 14 transformation products were identified and their distribution were determined. This study provides important data on the uptake and transformation of pharmaceuticals in plant tissues.

Pretreatment Methods for the Determination of Antibiotics Residues in Food Samples and Detected by Liquid Chromatography Coupled with Mass Spectrometry Detectors: A Review

With the increasing use of antibiotics worldwide, antibiotic monitoring has become a topic of concern. After metabolizing of antibiotics in animals, the metabolites enter the environment through excreta or ingested by the human body via food chain that may exacerbate the emergence of antibiotic resistance and then threaten human's life. This article summarized several analytical methods used for the determination of antibiotics in recent 10 years. Due to the complex matrices and low concentration level of antibiotics in the food samples, a reliable analysis method is required to maximize the recovery rate. Several techniques like solid phase extraction (SPE), dispersive liquid-liquid microextraction (DLLME) and QuEChERS have been frequently used in the pretreatment process for analytes extraction and concentration. After the pretreatment, ultra-high performance liquid chromatography combined with mass spectrometry has been a reliable method for quantitative analysis and is able to determine multiple antibiotics simultaneously. This review also gives an overview about analytical conditions for antibiotics residues in different food samples and their method validation parameters.

Antibiotic resistance in the environment

Antibiotic resistance is a global health challenge, involving the transfer of bacteria and genes between humans, animals and the environment. Although multiple barriers restrict the flow of both bacteria and genes, pathogens recurrently acquire new resistance factors from other species, thereby reducing our ability to prevent and treat bacterial infections. Evolutionary events that lead to the emergence of new resistance factors in pathogens are rare and challenging to predict, but may be associated with vast ramifications. Transmission events of already widespread resistant strains are, on the other hand, common, quantifiable and more predictable, but the consequences of each event are limited. Quantifying the pathways and identifying the drivers of and bottlenecks for environmental evolution and transmission of antibiotic resistance are key components to understand and manage the resistance crisis as a whole. In this Review, we present our current understanding of the roles of the environment, including antibiotic pollution, in resistance evolution, in transmission and as a mere reflection of the regional antibiotic resistance situation in the clinic. We provide a perspective on current evidence, describe risk scenarios, discuss methods for surveillance and the assessment of potential drivers, and finally identify some actions to mitigate risks.

Synthesis of aqueous media stable MIL101-OH/chitosan for diphenhydramine and metronidazole adsorption

In this study, pristine MIL101(Cr) was modified to synthesize hydroxyl-functionalized (MIL101(Cr)-OH) and chitosan (CS)-coated (MIL101(Cr)-OH/CS) metal-organic frameworks (MOFs) to enhance adsorption capacity and reusability, respectively. The synthesized adsorbents were characterized by XRD, FTIR, and BET analyses. The kinetics behavior and the equilibrium adsorption of diphenhydramine (DPH) and metronidazole (MNZ) from aqueous solution on the synthesized adsorbents and a commercial activated carbon were compared at 25°C. The pH-dependent of the adsorption capacity and reusability of MIL101-OH/CS were investigated. The results showed that upon adding OH functional group and chitosan polymer, the adsorption capacity increased; the DPH adsorption capacity on MIL101-OH and MIL101-OH/CS was 634 and 573 mg/g, respectively. Also, the maximum adsorption capacity of MNZ on MIL101-OH/CS was 600 mg/g, which was twice the adsorption capacity of MIL101 and four times the adsorption capacity of the commercial activated carbon. The equilibrium and kinetics behavior results were in good agreement with Langmuir and the pseudo-second-order models, respectively. The DPH and MNZ adsorption mechanisms on MIL101-OH/CS were hydrogen bonding and electrostatic interactions, respectively.

Evaluation of the Correspondence between the Concentration of Antimicrobials Entering Sewage Treatment Plant Influent and the Predicted Concentration of Antimicrobials Using Annual Sales, Shipping, and Prescriptions Data

The accuracy and correspondence between the measured concentrations from the survey and predicted concentrations on the basis of the three types of statistical antimicrobial use in Japan was evaluated. A monitoring survey of ten representative antimicrobials: ampicillin (APL), cefdinir (CDN), cefpodoxime proxetil (CPXP), ciprofloxacin (CFX), clarithromycin (CTM), doxycycline (DCL), levofloxacin (LFX), minocycline (MCL), tetracycline (TCL), and vancomycin (VMC), in the influent of sewage treatment plant (STP) located in urban areas of Japan, was conducted. Then, the measured values were verified in comparison with the predicted values estimated from the shipping volumes, sales volumes, and prescription volumes based on the National Database of Health Insurance Claims and Specific Health Checkups of Japan (NDB). The results indicate that the correspondence ratios between the predicted concentrations calculated on the basis of shipping and NDB volumes and the measured concentrations (predicted concentration/measured concentration) generally agreed for the detected concentration of antimicrobials in the STP influent. The correspondence ratio on the basis of shipping volume was, for CFX, 0.1; CTM, 2.9; LFX, 0.5; MCL, 1.9; and VMC, 1.7, and on the basis of NDB volume the measured concentration was CFX, 0.1; CTM, 3.7; DCL, 0.4; LFX, 0.7; MCL, 1.9; TCL, 0.6; and VMC, 1.6. To our knowledge, this is the first report to evaluate the accuracy of predicted concentrations based on sales, shipping, NDB statistics and measured concentrations for antimicrobials in the STP influent.

Determination of 42 antibiotic residues in seven categories in water using large volume direct injection by ultra high performance liquid chromatography-triple quadrupole mass spectrometry

抗生素作为新型有机污染物在自然水体中被频繁检出,检出种类多且含量水平低,为了实现更加快速、全面、准确的高通量分析,研究开发了一种利用大体积直接进样测定水中7大类(磺胺类、林可酰胺类、喹诺酮类、大环内酯类、四环素类、头孢类及氯霉素类)42种抗生素的超高效液相色谱-三重四极杆质谱法。水样经0.22 μm滤膜过滤,加入Na₂EDTA并调节pH值至6.0~8.0,加入内标混匀后,采用Phenomenex Kinetex C18柱(50 mm×30 mm, 2.6 μm),以0.1%(v/v)甲酸水溶液-乙腈作为流动相进行梯度洗脱,质谱智能化分时间段-多反应选择离子监测(Schedule-MRM)模式进行检测。42种抗生素在相关线性范围内线性良好(r=0.9949~0.9995),回收率为80.1%~125%,相对标准偏差为0.8%~12.2%,方法检出限为0.015~3.561 ng/L。将该方法应用于10份水源水和5份末梢水的检测,结果显示在42种抗生素中,12种抗生素有检出,包括磺胺类、大环内酯类、林可酰胺类和氯霉素类,其在水源水中的检出率达100%;林可霉素和氯霉素是检出质量浓度最高的两种抗生素,它们的质量浓度范围分别为3.83~13.8和24.8~33.6 ng/L。该方法从检出限和回收率两方面与标准方法和文献报道进行了比较,检出限及回收率均满足要求。该方法与传统前处理方法相比具有简单、快速、绿色、精密度高、准确度高、消耗样品量小的优点,能用于地表水、地下水、末梢水等较为洁净水体中42种痕量水平的抗生素测定。

Quantum dots based sensitive nanosensors for detection of antibiotics in natural products: A review

Residual antibiotics in food products originated from administration of the antibiotics to animals may be accumulated through food metabolism in the human body and endanger safety and health. Thus, developing a prompt and accurate way for detection of antibiotics is a crucial issue. The zero-dimensional fluorescent probes including metals based, carbon and graphene quantum dots (QDs), are highly sensitive materials to use for the detection of a wide range of antibiotics in natural products. These QDs demonstrate unique optical properties like tunable photoluminescence (PL) and excitation-wavelength dependent emission. This study investigates the trends related to carbon and metal based QDs preparation and modification, and their diverse detection application. We discuss the performance of QDs based sensors application in various detection systems such as photoluminescence, photoelectrochemical, chemiluminescence, electrochemiluminescence, colorimetric, as well as describing their working principles in several samples. The detecting mechanism of a QDs-based sensor is dependent on its properties and specific interactions with particular antibiotics. This review also tries to describe environmental application and future perspective of QDs for antibiotics detection.

Fully-automated SPE coupled to UHPLC-MS/MS method for multiresidue analysis of 26 trace antibiotics in environmental waters: SPE optimization and method validation

Achieving simultaneous determination of antibiotic multiresidues in environmental waters by solid phase extraction (SPE) coupled with ultra-high-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) with detection limits ≤ ng L^-1 is still a huge challenge. Moreover, the offline SPE procedure was performed manually, costly, and time-consuming, while the online SPE required precision pretreatment instruments that require highly-skilled personnel. In this paper, a fully automated SPE coupled with UHPLC-MS/MS method was developed for analysis of antibiotics (sulfonamides, quinolones, and macrolides) in water matrices. Sample preparation optimization included SPE materials and configuration (HLB disks), sample volume (500-1000 mL), and pH (pH = 3) with a flow rate at 2~5 mL min^-1, and an elution procedure with 2 × 6 mL methanol, and 2 × 6 mL acetone. Meanwhile, the parameters for UHPLC-MS/S detection of analytes were optimized, including LC retention time, and MS parameters. The instrumental limits of detection (LOD) and quantification (LOQ) of analytes ranged from 0.01-0.72 μg L^-1 and 0.05-2.39 μg L^-1, respectively, with satisfactory linear calibration (R² > 0.995) and precision (< 9.9%). Recoveries in spike samples ranged between 77.5-104.9% in pure water, 59.4-97.8% in surface water (SW), and 58.2-108.6% in wastewater effluent (WWE) with relative standard deviations ≤ 12.8%. The matrix effects observed for most analytes were suppression (0-28.1%) except for five analytes having presented enhancement (0-14.6 %) in SW or WWE. This method can basically meet the needs of trace antibiotic residues detection in waters, with examples of concentrations of detected antibiotics being lower than LOQ (LLQ) -94.47 ng L^-1 in WWEs and LLQ-15.47 ng L^-1 in SW in the lower reaches of the Yangtze River Basin.

Voltammetric Determination of Active Pharmaceutical Ingredients Using Screen-Printed Electrodes

A simple, fast, sensitive and low-cost voltammetric method using a screen-printed carbon electrode (SPCE) is presented in this work for the simultaneous determination of ascorbic acid (AA), paracetamol (PA), dextromethorphan (DX) and caffeine (CF) in both pharmaceutical formulations and samples of environmental interest. The oxidative peak current displayed linear dependence on concentration within the range 1.7–60.5, 0.6–40.0, 0.9–8.4 (1st linear part) and 1.8–22.0 mg L−1 for AA, PA, DX and CF, respectively; and detection limits of 0.5, 0.2, 0.3 and 0.5 mg L−1, respectively. The developed differential pulse voltammetric (DPV) method was validated using both a pharmaceutical product and a spiked well water sample. A very good agreement between the determined and the theoretical label drug content and recoveries in the range of 99.5–100.8% were obtained for pharmaceutical product and well water samples, respectively.

The co-administration effects of florfenicol and lasalocid on performance, biochemical and pathological parameters of muscle, heart, liver, kidney and sciatic nerve in broiler chickens

The study aimed to examine the effect of simultaneous application of florfenicol and lasalocid on the performance and vital organ function of chickens. For this, 300 chicks were divided into four groups. Group one to three received florfenicol, lasalocid and lasalocid plus florfenicol, respectively. Group four as the control group received a basic diet without lasalocid or florfenicol. Lasalocid was used from 7 to 35 days old, continuously. Florfenicol was used at 21 days old for 5 days. The growth indices were measured at the end of each week. The chickens were euthanized at the ages of 28 and 35 days old after collecting blood samples with and without anticoagulants. The liver, heart, muscle, kidney and sciatic nerve were collected in formalin 10% for histopathological examination. The blood and serum samples were used to determine clinical pathologic and hematologic indices. The ratio of internal organs to body weight and ratio of the right ventricle to the total ventricles (RV/TV) of the heart was measured. Results showed, the use of lasalocid decreased feed conversion rate and triglyceride, and increased total protein. Simultaneous administration of lasalocid and florfenicol affected histopathology of the liver and heart and significantly increased creatine phosphokinase, uric acid and the ratio of RV/TV of heart. The eosinophil percentage in the chickens who received florfenicol plus lasalocid was significantly higher than chickens who received florfenicol alone (p < 0.05). In conclusion, it seems that simultaneous administration of the florfenicol and lasalocid induces side-effects especially on cardiac function and it is not recommended.

Single-drop microextraction technique for the determination of antibiotics in environmental water

Growing concerns related to antibiotic residues in environmental water have encouraged the development of rapid, sensitive, and accurate analytical methods. Single-drop microextraction has been recognized as an efficient approach for the isolation and preconcentration of several analytes from a complex sample matrix. Thus, single-drop microextraction techniques are cost-effective and less harmful to the environment, subscribing to green analytical chemistry principles. Herein, an overview and the current advances in single-drop microextraction for the determination of antibiotics in environmental water are presented were included. In particular, two main approaches used to perform single-drop microextraction (direct immersion-single-drop microextraction and headspace-single-drop microextraction) are reviewed. Furthermore, the impressive analytical features and future perspectives of single-drop microextraction are discussed in this review. This article is protected by copyright. All rights reserved.

Adsorption and detoxification of pharmaceutical compounds from wastewater using nanomaterials: A review on mechanism, kinetics, valorization and circular economy

Antibiotics overuse, inappropriate conduct, and discharge have led to adverse effects on various ecosystems. The occurrence of antibiotics in surface and drinking water is a matter of global concern. It is responsible for multiple disorders, including disruption of endocrine hormones and high chronic toxicity. The hospitals, pharmaceutical industries, households, cattle farms, and aquaculture are the primary discharging sources of antibiotics into the environment. This review provides complete detail on applying different nanomaterials or nanoparticles for the efficient removal of antibiotics from the diverse ecosystem with a broader perspective. Efforts have been made to focus on the degradation pathways and mechanism of antibiotic degradation using nanomaterials. More light has been shed on applying nanostructures in photocatalysis, which would be an economical and efficient solution. The nanoscale material or nanoparticles have incredible potential for mineralizing pharmaceutical compounds in aqueous solutions at low cost, easy handling characteristics, and high efficacy. Furthermore, nanoparticles can absorb the pharmaceutical by-products and wastes at a minimum cost as they can be easily recycled. With the increasing number of research in this direction, the valorization of pharmaceutical wastes and by-products will continue to expand as we progress from old conventional approaches towards nanotechnology. The utilization of nanomaterials in pharmaceutical wastewater remediation is discussed with a major focus on valorization, energy generation, and minimization and its role in the circular economy creating sustainable development.

Comparison of the elimination effectiveness of tetracycline and AmpC β-lactamase resistance genes in a municipal wastewater treatment plant using four parallel processes

Municipal wastewater treatment plants (mWWTPs), considered reservoirs of antibiotic resistance genes (ARGs), are selected to compare the contributions of technology and process to ARG removal. Fifteen ARGs (tetA, tetB, tetC, tetE, tetG, tetL, tetM, tetO, tetQ, tetS, tetX, MOX, CIT, EBC, and FOX) and two integron genes (intI1, intI2) were tracked and detected in wastewater samples from a large-scale mWWTP with four parallel processes, including three biological technologies of AAO (anaerobic-anoxic-oxic), AB (adsorption-biodegradation), and UNITANK, two different disinfection technologies, and two primary sedimentation steps. The results showed that ARGs were widely detected, among which tetA and tetM had the highest detection rate at 100%. AAO was the most effective process in removing ARGs, followed by the AB and UNITANK processes, where the separation step was critical: 37.5% AmpC β-lactamase genes were reduced by the secondary clarifier. UV disinfection was more efficient than chlorination disinfection by 47.0% in ARG removal. Both disinfection and primary sedimentation processes could effectively remove integrons, and the swirling flow grit chamber was a more effective primary settling facility in total ARG removal than the aerated grit chamber. The tet genes and AmpC β-lactamase genes were significantly correlated with the water quality indexes of BOD5, CODCr, SS, TP, TOC, pH and NH4+-N (p < 0.05). In addition, the correlation between efflux pump genes and AmpC β-lactamase genes was strongly significant (r2 = 0.717, p < 0.01). This study provides a more powerful guide for selecting and designing treatment processes in mWWTPs with additional consideration of ARG removal.

A review targeting veterinary antibiotics removal from livestock manure management systems and future outlook

Veterinary antibiotics (VAs) contamination has been considered as a worldwide environmental and health concern in recent decades. This paper reviewed the variability of contents of VAs and their release from the animal breeding industry into the surrounding environment along with the performance of the manure treatment technologies. The data collected revealed that VAs were mostly excreted in animal feces and observed in manure, soil, water, and sediment. The findings illustrate the disparity of VAs in excretion rates, consumption, and their residues in the environment with relatively high distribution for tetracyclines, fluoroquinolones, and sulfonamides. Anaerobic digestion has a capacity to remove of 73% VAs while manure composting and constructed wetlands can remove 84.7%, and 90% VAs. Due to the profound effect of antibiotics on the environment, further research and intensive management strategies for livestock manure need to be designed to improve the removal efficiency and manure management technologies.

Emerging contaminants detected in aquaculture sites in Java, Indonesia

Pharmaceuticals of emerging concern (acetaminophen (ACM), trimethoprim (TMP), oxytetracycline (OTC), and sulfamethoxazole (SMX)) were detected in water samples from aquaculture environments and nonaquaculture sites in four regions located on the northern coast of Central Java. ACM was the most prevalent pharmaceutical, with a mean concentration ranging from not detected (n.d.) to 5.5 ± 1.9 ngL^-1 (Brebes). Among the target antibiotics (TMP, OTC, SMX), OTC was the most ubiquitous, with a mean concentration varying from n.d. to 8.0 ± 3.3 ngL^-1. Correlation analysis demonstrated that there was a significant correlation between TMP and SMX concentrations. Based on ecological risk assessment evaluation, the use of OTC requires serious consideration, as it presented high health risks to algae, while ACM, TMP, and SMX posed an insignificant to moderate risk to algae, invertebrates, and fish. The findings obtained from this study highlight OTC as an emerging contaminant of prominent concern. More attention needs to be given to managing and planning for the sustainable management of shrimp farms, particularly in the northern part of Central Java.

Identification of indicator PPCPs in landfill leachates and livestock wastewaters using multi-residue analysis of 70 PPCPs: Analytical method development and application in Yangtze River Delta, China

The source apportionment of pharmaceuticals and personal care products (PPCPs) in the water environment based on indicators (i-PPCPs) requires a comprehensive characterization of various emission sources using reliable analytical methods for a wide spectrum of PPCPs. In this study, a robust and sensitive method based on solid phase extraction (SPE) and ultra-high performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS) for analyzing 70 PPCPs belonging to 17 therapeutic classes in landfill leachates and livestock wastewaters was developed. The SPE cartridges, sample pH, elution solvents and chelating agent additions were optimized, and acceptable recoveries (60- 130% for 67 target compounds), low method quantification limits (landfill leachate: 3- 1309 ng/L; livestock wastewater: 3- 686 ng/L) and high precisions (repeatability: 0- 20% for over 99% injections; reproducibility: 0- 20% for over 90% injections) were obtained. Using the optimized analytical method to characterize PPCPs in the typical landfill leachate and livestock wastewater in Yangtze River Delta, China, we found anthelmintics, which were first reported in landfill leachates globally, exhibited the highest concentration (albendazole, maximum concentration of 61.6 μg/L), and therefore proposed albendazole as one of the promising i-PPCP candidates in landfill leachates. In livestock wastewaters, antibiotics lincomycin was the most abundant PPCP (maximum concentration: 735 μg/L) and identified as an i-PPCP candidate for livestock-originated contamination. In addition, 15 non-antibiotic PPCPs were first investigated in the livestock wastewater in China and some non-steroidal anti-inflammatory drugs, acetaminophen, diclofenac and naproxen, were detected at similar concentration level (1.16- 91.1 μg/L) to antibiotics, highlighting the necessity to include representative non-antibiotic PPCPs in the studies of emerging contaminants in livestock wastewaters. The developed method provides a tool to comprehensively investigate PPCPs in high-strength wastewater, and the preliminary findings in the characterization of typical landfill leachates and livestock wastewaters are helpful to select i-PPCPs for the source apportionment of PPCPs in Yangtze River Delta, China.

Wide-scope screening for pharmaceutically active substances in a leafy vegetable cultivated under biogas slurry irrigation

The use of livestock waste for the production of biogas and the application of biogas slurry to agricultural soil can resolve livestock waste problems and reduce synthetic fertiliser use. However, the migration of veterinary drugs to land and crops resulting from biogas slurry irrigation is a potential food safety concern. This study employed an ultra-performance liquid chromatography coupled with quadrupole-time of flight high-resolution mass spectrometry system for wide-scope suspect screening of pharmaceutically active substances on crop cultivated under biogas slurry irrigation. Briefly, a total of 22 pak choi samples were obtained from a greenhouse farmed in tropical south Taiwan between March 2019 and March 2020. Molecular spectra and fragmented ions (between m/z 70 and 1100) were acquired. Ion features were searched and matched with a library consisting of 1068 compounds. The matrixes in the crop production environment including soil, livestock wastewater, biogas slurry, and groundwater were included in this study to elucidate potential sources of the pharmaceutically active substances. Results demonstrated 23 suspects were matched with high mass accuracy (mass error within ±5.0 ppm) in pak choi. The detection of both bufexamac and nandrolone were confirmed using standards, where a new system of identification points was applied. Nandrolone was detected throughout the pak choi samples as well as livestock wastewater. Tetracycline, macrolide, and sulfonamide antibiotics were presented in biogas slurry and soil but not pak choi. This is the first study to reveal the presence of multiclass pharmaceutically active substances in a crop supplied as food. Such findings suggest that anabolics and antibiotics should be closely monitored in the corps irrigated by biogas slurry in future.

Development and validation of an LC-MS/MS method for quantifying nine antimicrobials in human serum and its application to study the exposure of Chinese pregnant women to antimicrobials

Background

To study the prevalence of the exposure of pregnant women to antimicrobials, a sensitive and reliable liquid chromatography‐tandem mass spectrometry (LC‐MS/MS) method was developed and validated to determine nine antimicrobials, namely sulfadimidine, sulfapyridine, sulfadiazine, sulfathiazole, ofloxacin, ciprofloxacin, norfloxacin, tetracycline, and lincomycin, in human serum.

Methods

The sample preparation procedure included protein precipitation followed by a cleanup step with solid phase extraction (SPE). Separation was carried out using a CORTECS T3 column (100 × 2.1 mm, 2.7 µm) by gradient elution with a runtime of 8.0 min. Detection was performed on a triple quadruple tandem mass spectrometer with scheduled multiple reaction monitoring (sMRM) in positive ion scan mode.

Results

The calibration curves were linear over the concentration range of 0.5–50 ng/ml, and the limit of quantitation was between 0.01 and 0.2 ng/ml. For each level of quality control samples, the inter‐ and intra‐assay precision values were less than 12.0%, and the accuracy ranged from 86.1% to 109.0%. No significant matrix effect or carryover was observed. The antimicrobials of interest were stable under all investigated conditions. The validated method was applied to analyze clinical samples from pregnant women in China, and 10 out of 500 samples showed the presence of antimicrobial residues. Moreover, compared with the time‐resolved fluoro‐immunoassay (TRFIA) method, the developed method showed greater sensitivity and specificity.

Conclusion

This study provides a simple and rapid LC‐MS/MS method for the simultaneous measurement of nine antimicrobials in serum samples, which could be a useful tool in clinical utilization.

BADAN-conjugated β-lactamases as biosensors for β-lactam antibiotic detection

β-Lactam antibiotic detection has significant implications in food safety control, environmental monitoring and pharmacokinetics study. Here, we report the development of two BADAN-conjugated β-lactamases, E166Cb and E166Cb/N170Q, as sensitive biosensors for β-lactam antibiotic detection. These biosensors were constructed by coupling an environment-sensitive BADAN probe onto location 166 at the active site of the PenP β-lactamase E166C and E166C/N170Q mutants. They gave fluorescence turn-on signals in response to β-lactam antibiotics. Molecular dynamics simulation of E166Cb suggested that the turn-on signal might be attributed to a polarity change of the microenvironment of BADAN and the removal of the fluorescence quenching effect on BADAN exerted by a nearby Tyr-105 upon the antibiotic binding. In the detection of four β-lactams (penicillin G, penicillin V, cefotaxime and moxalactam), both E166Cb and E166Cb/N170Q delivered signal outputs in an antibiotic-concentration dependent manner with a dynamic range spanning from 10 nM to 1 μM. Compared to E166Cb, E166Cb/N170Q generally exhibited more stable signals owing to its higher deficiency in hydrolyzing the antibiotic analyte. The overall biosensor performance of E166Cb and E166Cb/N170Q was comparable to that of their respective fluorescein-modified counterparts, E166Cf and E166Cf/N170Q. But comparatively, the BADAN-conjugated enzymes showed a higher sensitivity, displayed a faster response in detecting moxalactam and a more stable fluorescence signals towards penicillin G. This study illustrates the potential of BADAN-conjugated β-lactamases as biosensing devices for β-lactam antibiotics.

Occurrence of oxytetracycline residues in milk samples from Palakkad, Kerala, India

Background and Aim

Food of animal origin such as milk is vital for nutritional security and should be free of any antibiotic residues due to its public health significance. We designed a study aiming to determine the occurrence of antibiotic residues and in further levels of oxytetracycline residues in pooled raw milk samples from Palakkad district, Kerala.

Materials and Methods

We collected pooled raw milk samples were collected from Alathur, Chittoor, and Palakkad blocks of Palakkad district, Kerala. A total of 215 samples were screened for antibiotic residues by microbial inhibition assay (MIA) and the positive samples were subjected to enzyme-linked immunosorbent assay (ELISA) to determine oxytetracycline residues, this was further confirmed using high-performance liquid chromatography (HPLC).

Results

We found that out of the 215 pooled raw milk samples screened for antibiotic residues using MIA, 22 samples (10.23%) were positive for antibiotic residues from Palakkad, Kerala. Out of these 22 samples, five (2.33%) were positive for oxytetracycline residues. We further calculated the mean concentration of oxytetracycline residues in these five samples and estimated it to be 201.00±41.25 ng/mL and 272.11±53.21 ng/mL using ELISA and HPLC, respectively. On analyzing these five samples, we found that four samples (1.86%) exceeded the maximum residue limits level of 100 ng/mL for oxytetracycline residues in milk as specified by Codex Alimentarius Commission/Food Safety and Standards Authority of India (FSSAI).

Conclusion

This study revealed that the occurrence of oxytetracycline residues in pooled raw milk samples in the Palakkad district of Kerala. Hence, there is a need for surveillance and monitoring of antibiotic residues in milk due to its impact on public health to ensure consumer safety.

Trends in sensitive detection and rapid removal of sulfonamides: A review

Sulfonamides in environmental water, food, and feed are a major concern for both aquatic ecosystems and public health, because they may lead to the health risk of drug resistance. Thus, numerous sensitive detection and rapid removal methodologies have been established. This review summarizes the sample preparation techniques and instrumental methods used for sensitive detection of sulfonamides. Additionally, adsorption and photocatalysis for the rapid removal of sulfonamides are also discussed. This review provides a comprehensive perspective on future sulfonamide analyses that have good performance, and on the basic methods for the rapid removal of sulfonamides.

Thermostable β-Lactamase Mutant with Its Active Site Conjugated with Fluorescein for Efficient β-Lactam Antibiotic Detection

Monitoring the β-lactam antibiotic level has been an important task in food industry and clinical practice. Here, we report the development of a fluorescent PenP β-lactamase, PenP-E166Cf/N170Q, for efficient β-lactam antibiotic detection. It was constructed by covalently attaching fluorescein onto the active-site entrance of a thermostable E166Cf/N170Q mutant of a Bacillus licheniformis PenP β-lactamase. It gave a fluorescence turn-on signal toward various β-lactam antibiotics, where the fluorescence enhancement was attributed to the acyl-enzyme complex formed between PenP-E166Cf/N170Q and the β-lactam antibiotic. It demonstrated enhanced signal stability over its parental PenP-E166Cf because of the suppressed hydrolytic activity by the N170Q mutation. Compared with our previously constructed PenPC-E166Cf biosensor, PenP-E166Cf/N170Q was more thermostable and advanced in detecting β-lactams in terms of response time, signal stability, and detection limit. Positive fluorescence signals generated by E166Cf/N170Q in response to the penicillin-containing milk and mouse serum illustrated the feasibility of the biosensor for antibiotic detection in real samples. Taken together, our findings suggest the potential application of PenP-E166Cf/N170Q in biosensing β-lactam antibiotics.