Chemical and odor characterization of gas emissions released during composting of solid wastes and digestates

Insights into effects of thermotolerant nitrifying and sulfur-oxidizing inoculants on nitrogen-sulfur co-metabolism in sewage sludge composting

In this study, high temperature thermotolerant nitrifying bacteria (TNB) and high temperature thermotolerant sulfide oxidizing bacteria (TSOB) were obtained from compost samples and inoculated into sewage sludge (SS) compost. The effects of inoculation on physical and chemical parameters, ammonia and hydrogen sulfide release, nitrogen form and sulfur compound content change and physical-chemical properties during nitrogen and sulfur conversion were studied. The results showed that inoculation of TNB and TSOB increased the temperature, pH, OM degradation, C/N ratio and germination index (GI) of compost. Compared with the control treatment (CK), the addition of inoculants reduced the release of NH3 and H2S, and transformed them into nitrogen and sulfur compounds, the hydrolysis of polymeric ferrous sulfate was promoted, resulting in relatively high content of sulfite and sulfate. At the same time, the physical and chemical properties of SS have a strong correlation with nitrogen and sulfur compounds.

Release characteristics and risk assessment of volatile sulfur compounds in municipal wastewater treatment plants

In recent years, the malodorous gases generated by sewage treatment plants have gradually received widespread attention due to their sensory stimulation and health hazards. The emission concentration, sensory evaluation and health risk assessment of volatile sulfur compounds (VSCs) were all explored in two municipal wastewater treatment plants (WWTPs) with oxidation ditch and anaerobic/oxic treatment process, respectively. The VSCs concentration showed the highest amount in the primary treatment unit in both the two WWTPs (73.3% in Plant A and 93.0% in Plant B), while the H2S took the main role in the composition of VSCs. However, H2S took a larger percentage in Plant A (84.5% ∼ 87.0%) rather than Plant B (61.2% ∼ 83.5%), which may be due to the different operating conditions and sludge properties in different treatment process. Besides, H2S also gained the first rank in the sensory evaluation and health risk assessment, which may cause considerable sensory irritation and health risk to workers and surrounding residents. Furthermore, the influencing factor analyses of VSCs emission showed that the temperature of water and air, ORP of sludge made the greatest effect on VSCs release. This study provides theoretical and data support for the research of VSCs emission control in WWTPs.

Tackling municipal solid waste crisis in India: Insights into cutting-edge technologies and risk assessment

Municipal Solid Waste (MSW) management is a pressing global concern, with increasing interest in Waste-to-Energy Technologies (WTE-T) to divert waste from landfills. However, WTE-T adoption is hindered by financial uncertainties. The economic benefits of MSW treatment and energy generation must be balanced against environmental impact. Integrating cutting-edge technologies like Artificial Intelligence (AI) can enhance MSW management strategies and facilitate WTE-T adoption. This review paper explores waste classification, generation, and disposal methods, emphasizing public awareness to reduce waste. It discusses AI's role in waste management, including route optimization, waste composition forecasting, and process parameter optimization for energy generation. Various energy production techniques from MSW, such as high-solids anaerobic digestion, torrefaction, plasma pyrolysis, incineration, gasification, biodegradation, and hydrothermal carbonization, are examined for their advantages and challenges. The paper emphasizes risk assessment in MSW management, covering chemical, mechanical, biological, and health-related risks, aiming to identify and mitigate potential adverse effects. Electronic waste (E-waste) impact on human health and the environment is thoroughly discussed, highlighting the release of hazardous substances and their contribution to air, soil, and water pollution. The paper advocates for circular economy (CE) principles and waste-to-energy solutions to achieve sustainable waste management. It also addresses complexities and constraints faced by developing nations and proposes strategies to overcome them. In conclusion, this comprehensive review underscores the importance of risk assessment, the potential of AI and waste-to-energy solutions, and the need for sustainable waste management to safeguard public health and the environment.

Release characteristics and risk assessment of volatile sulfur compounds in a municipal wastewater treatment plant with odor collection device

Due to the malodorous effects and health risks of volatile sulfur compounds (VSCs) emitted from wastewater treatment plants (WWTPs), odor collection devices have been extensively utilized; however, their effectiveness has rarely been tested. In the present investigation, the characteristics of VSCs released in a WWTP equipped with gas collection hoods are methodically examined by gas chromatography. The obtained results indicate that the concentration of VSCs in the ambient air can be substantially reduced, and the primary treatment unit still achieves the highest concentration of VSCs. Compared to WWTPs without odor collection devices, the concentration of H2S in this WWTP is not dominant, but its sensory effects and health risks are still not negligible. Additionally, research on the emission of VSCs from sludge reveals that the total VSCs emitted from dewatering sludge reaches the highest level. Volatile organic sulfur compounds play a dominant role in the component and sensory effects of VSCs released by sludge. This study provides both data and theoretical support for analyzing the effectiveness of odor collection devices in WWTPs, as well as reducing the source of VSCs. The findings can be effectively employed to optimize these devices and improve their performance.

Release characteristics of volatile organic compounds at residential garbage collection points: a case study of Hangzhou, China

With the implementation of garbage classification, perishable waste has become increasingly concentrated. This has led to a significant change in the VOC release characteristics at residential garbage collection points, posing a potential risk with unknown characteristics. This study investigated the release characteristics, odor pollution, and health risks of VOCs at garbage collection points under different classification effectiveness, seasons, garbage drop-off periods, and garbage collection point types. The results showed that the average concentration of VOCs released from the garbage sorting collection points (SPs) was 341.43 ± 261.16 μg/m3, and oxygenated compounds (e.g., ethyl acetate and acetone) were the main VOC components. The VOC concentration increased as the community classification effectiveness improved, and it was higher in summer (followed by spring, autumn, and winter). Moreover, the VOC concentrations were higher in the evenings than in the mornings and at centralized garbage collection points (CPs) than at SPs. Further, odor activity value (OAV) assessments indicated that acrolein, styrene, and ethyl acetate were the critical odorous components, with an average OAV of 0.87 ± 0.85, implying marginal odor pollution in some communities. Health risk assessments further revealed that trichloroethylene, benzene, and chlorotoluene were the critical health risk substances, with an average carcinogenic risk (CR) value of 10-6-10-4, and a non-carcinogenic risk (HI) value < 1. These results indicated that HIs were acceptable, but potential CRs existed in the communities. Therefore, VOC pollution prevention and control measures should be urgently strengthened at the garbage collection points in high pollution risk scenarios.

Effect evaluation of different green wastes on food waste digestate composting and improvement of operational conditions

This study attempted to determine the influence of diverse green wastes on food waste digestate composting and the improvement of operational conditions. Various effects of the green wastes (GW), with different types and sizes, initial substrate mixture C/N ratios, compost pile heights, and turning frequencies on the food waste digestate (FWD) composting were examined in the current work. The findings showed that the use of street sweeping green waste (SSGW) as an additive can maintain the thermophilic stage of the FWD composting for 28 days, while the end-product contained the greatest amounts of total phosphorus (TP, 2.29%) and total potassium (TK, 4.61%) and the lowest moisture content (14.8%). Crushed SSGW (20 mm) enabled the FWD composting to maintain the longest thermophilic period (28 days), achieving the highest temperature (70.2 °C) and seed germination index (GI, 100%). Adjusting the initial substrate mixture C/N ratio to 25, compost pile height to 30 cm, and turning frequency to three times a day could enhance the efficiency and improve the fertilizer quality of the co-composting of the FWD and SSGW. This study suggested that co-composting of FWD and SSGW (FWD/SSGW = 2.3, wet weight) is a promising technique for the treatment of municipal solid waste and provided significant theoretical data for the application of composting.

Slaughterhouse by-products composting: can microorganisms inoculum addition mitigate final compost odor emission?

Small slaughterhouses generate biowaste, which for economic reasons, is generally destined for composting. Inoculating appropriate microorganisms can improve biodegradation efficiency and mitigate odor generation during the composting process and can give rise to composts with neutral or pleasant odors. Therefore, the aim of this study was to compare the odor intensity reduction of compost generated with and without a formulated inoculum (Saccharomyces cerevisiae, Bacillus subtilis, and Rhodopseudomonas palustris). A set of experimental data was collected and analyzed according to the German "Verein Deutscher Ingenieure" odor protocol. The results showed that adding microorganisms was effective in reducing unpleasant odors in all three composts generated from swine, cattle, and poultry slaughterhouse by-products during both summer and winter seasons. Additionally, soil odor was predominant in composts that were inoculated in the two tested seasons (i.e., summer and winter). On the other hand, composts without inoculation had odors similar to peat for swine compost, ammonia for cattle compost, and manure for poultry compost, regardless of the season tested. Overall, composting process with appropriate inoculum can help in the correct disposal of slaughterhouse wastes by transforming organic matter into composts, which can have economic and environmental value as a soil conditioner and/or fertilizer.

Synthetic microbial consortia to enhance the biodegradation of compost odor by biotrickling filter

Composting generates odorous gases, including ammonia (NH3), hydrogen sulfide (H2S), and volatile organic compounds (VOCs). The Biological Trickling Filter (BTF) is effective for odor treatment, but it may have limitations with hydrophobic VOCs. In this study, a strain of Bacillus subtilis with ammonia-reducing ability, a strain of Bacillus cereus with desulfurization ability and a strain of Schizophyllum commune with the ability to degrade dimethyl disulfide were isolated and screened. The three strains were combined to create synthetic microbial consortia for enhancing odor treatment in the BTF. Compared to the activated sludge control, the BTF with synthetic microbial consortia removed 92.43% ammonia, 92.75% hydrogen sulfide. Furthermore, it demonstrated a significant improvement in the removal rates of p-methyl mercaptan, methyl sulfide, and dimethyl disulfide. High-throughput sequencing was conducted on the fillers of the synthetic microbial consortia-inoculated BTF to analyze the microbial community composition.

Exploring the link between sulphur-containing compounds and noxious odours at waste management facilities: implications for odour monitoring and mitigation strategies

With this study we challenge the widely held assumption that sulphur-containing compounds in ambient air are good indicators of the presence noxious odours near waste management facilities. We analysed an extensive set of olfactometric data and data on the concentrations of hydrogen sulphide and trace sulphur compounds (TSCs) near a waste management facility in Croatia in 2021. The results show that the presence of noxious odours significantly correlates only with the concentrations of hydrogen sulphide and methyl mercaptan in ambient air but not with other measured TSCs. Thus, in addition to the measurement of pollutants in ambient air, Integrated Pollution and Prevention Control (IPPC) permits should mandate olfactometric measurements to detect and mitigate noxious odours near waste management facilities.

A strategic review on sustainable approaches in municipal solid waste management andenergy recovery: Role of artificial intelligence,economic stability andlife cycle assessment

The consumption of energy levels has increased in association with economic growth and concurrently increased the energy demand from renewable sources. The need under Sustainable Development Goals (SDG) intends to explore various technological advancements for the utilization of waste to energy. Municipal Solid Waste (MSW) has been reported as constructive feedstock to produce biofuels, biofuel carriers and biochemicals using energy-efficient technologies in risk freeways. The present review contemplates risk assessment and challenges in sorting and transportation of MSW and different aspects of conversion of MSW into energy are critically analysed. The circular bioeconomy of energy production strategies and management of waste are also analysed. The current scenario on MSW and its impacts on the environment are elucidated in conjunction with various policies and amendments equipped for the competent management of MSW in order to fabricate a sustained environment.

Physicochemical properties and risk assessment of perishable waste primary products

Fertilization has become one of the most important ways to recycle perishable waste. In order to reveal the effect of the nutrient of the perishable waste primary products on the market and the possible impact of their application, 136 perishable waste primary products were sampled in nine cities in Zhejiang province, China. The result shows that these products have high nutrient content (average nutrient content was 5.00%). However, the conductivity (7.19 mS/cm) total soluble salt content (12.07%), and grease content (5.99%) were too high. The excessive salt and grease may cause harm to soil and crops, and become the main limiting factors for the fertilizer utilization of perishable waste. Heavy metal content of most of the samples met current commercial organic fertilizer standards, except that lead and chromium content of some samples exceeded the limit standard. Toluene, ethylbenzene, m & p-xylene were generally detected in the samples. These toxic and harmful substances have brought risks to the safe use of perishable waste into fertilizers.

A critical review on odor measurement and prediction

Odor pollution has become a global environmental issue of increasing concern in recent years. Odor measurements are the basis of assessing and solving odor problems. Olfactory and chemical analysis can be used for odor and odorant measurements. Olfactory analysis reflects the subjective perception of human, and chemical analysis reveals the chemical composition of odors. As an alternative to olfactory analysis, odor prediction methods have been developed based on chemical and olfactory analysis results. The combination of olfactory and chemical analysis is the best way to control odor pollution, evaluate the performances of the technologies, and predict odor. However, there are still some limitations and obstacles for each method, their combination, and the prediction. Here, we present an overview of odor measurement and prediction. Different olfactory analysis methods (namely, the dynamic olfactometry method and the triangle odor bag method) are compared in detail, the latest revisions of the standard olfactometry methods are summarized, and the uncertainties of olfactory measurement results (i.e., the odor thresholds) are analyzed. The researches, applications, and limitations of chemical analysis and odor prediction are introduced and discussed. Finally, the development and application of odor databases and algorithms for optimizing odor measurement and prediction methods are prospected, and a preliminary framework for an odor database is proposed. This review is expected to provide insights into odor measurement and prediction.

Greenhouse Gas and Air Pollutant Emissions from Composting

Composting can divert organic waste from landfills, reduce landfill methane emissions, and recycle nutrients back to soils. However, the composting process is also a source of greenhouse gas and air pollutant emissions. Researchers, regulators, and policy decision-makers all rely on emissions estimates to develop local emissions inventories and weigh competing waste diversion options, yet reported emission factors are difficult to interpret and highly variable. This review explores the impacts of waste characteristics, pretreatment processes, and composting conditions on CO₂, CH₄, N₂O, NH₃, and VOC emissions by critically reviewing and analyzing 388 emission factors from 46 studies. The values reported to date suggest that CH₄ is the single largest contributor to 100-year global warming potential (GWP₁₀₀) for yard waste composting, comprising approximately 80% of the total GWP₁₀₀. For nitrogen-rich wastes including manure, mixed municipal organic waste, and wastewater treatment sludge, N₂O is the largest contributor to GWP₁₀₀, accounting for half to as much as 90% of the total GWP₁₀₀. If waste is anaerobically digested prior to composting, N₂O, NH₃, and VOC emissions tend to decrease relative to composting the untreated waste. Effective pile management and aeration are key to minimizing CH₄ emissions. However, forced aeration can increase NH₃ emissions in some cases.

Biological treatment of biowaste as an innovative source of CO-The role of composting process

Carbon monoxide (CO) is an essential "building block" for producing everyday chemicals on industrial scale. Carbon monoxide can also be generated though a lesser-known and sometimes forgotten biorenewable pathways that could be explored to advance biobased production from large and more sustainable sources such as bio-waste treatment. Organic matter decomposition can generate carbon monoxide both under aerobic and anaerobic conditions. While anaerobic carbon monoxide generation is relatively well understood, the aerobic is not. Yet many industrial-scale bioprocesses involve both conditions. This review summarizes the necessary basic biochemistry knowledge needed for realization of initial steps towards biobased carbon monoxide production. We analyzed for the first time, the complex information about carbon monoxide production during aerobic, anaerobic bio-waste treatment and storage, carbon monoxide-metabolizing microorganisms, pathways, and enzymes with bibliometric analysis of trends. The future directions recognizing limitations of combined composting and carbon monoxide production have been discussed in greater detail.

A critical review on slaughterhouse waste management and framing sustainable practices in managing slaughterhouse waste in India

Global meat consumption is on a rise with around 253 million metric tons of meat produced globally in the year 2020. Because of the rise in population and change in food preferences, meat consumption trend is likely to continue. Meat production by animal slaughtering increases the slaughterhouse wastes in the form of both solid and liquid wastes. Although various technologies for slaughterhouse waste management are available in developed countries, the effective utilization of slaughterhouse waste management is still missing in developing countries like India. India plays an active role in the meat export business globally and stood 2nd in the world with a total export valuation of 2.89 billion US $ in the year 2020. In this context, this study presents a critical overview of the current technological advancements in the global slaughterhouse waste management including utilization of by-products and further, the prevailing slaughterhouse waste management of India is discussed. Finally, a sustainable slaughterhouse waste management strategy emphasizing circular economy and regulations improvements have been suggested for India to compete in this sector at global scale.

In-situ utilization of nitrogen-rich wastewater discharged from a biotrickling filter as a moisture conditioning agent for composting: Insights into nitrogen transformation behavior and microbial mechanism

An NH₄⁺-NO₂^--rich wastewater discharged from a composting-biotrickling filter coupled system can be reused as a composting moisture adjustment agent. To investigate the impact mechanism of reuse, NH₄⁺-NO₂^--rich wastewater, NH₄⁺-rich wastewater, NO₂^--rich wastewater, and distilled water were added into the composting (i.e., AMN, AAN, ANO2, and ADW groups). Results show that compost of all groups met the corresponding criteria for stabilization, humification, and non-phytotoxicity of mature compost. AMN increased organic-N and NO₃^--N content and reduced NH₃ emissions, like AAN or ANO2, and avoid stimulating N₂O emission in AAN and ANO2. Furthermore, LEfSe analysis of microorganisms revealed that AMN reduced NH₃ emissions and increase organic-N content probably due to the inhibition of Alphaproteobacteria by ammonium, and increased nitrate content probably due to the stimulation of Aquamicrobium by nitrite. The avoided N₂O emission is probably due to a negative synergistic effect on the stimulation from ammonia and nitrite to denitrifying bacteria (eg., Sphingobacteriaceae).

Food waste digestate composting enhancement by sodium polyacrylate addition: Effects on nitrogen transformation processes and bacterial community dynamics

The influences of sodium polyacrylate (PAAS) at the ratios of 0% (CK), 0.5% (F1), 1.0% (F2), 1.5% (F3), 2.0% (F4) and 2.5% (F5) on nitrogen transformation and bacterial community composition were investigated in the composting of food waste digestate (FWD) and corn straw (CS). PAAS addition increased the thermophilic temperature but had no significant effect on pH values. PAAS exerted significantly effects on the concentration of total nitrogen (TN), ammonia nitrogen (NH₄⁺-N), nitrite-nitrogen (NO₂^--N) and nitrate-nitrogen (NO₃^--N). The compost product in 1.0% PAAS treatment was more active in absorbing nutrients. Firmicutes (9.40-83.54%), Actinobacteriota (9.98-51.50%), Proteobacteria (0.20-27.87%) and Bacteroidota (0.11-34.69%) were the dominant phyla in FWD composting. Moreover, relative to CK, PAAS promoted the propagation of dominant bacterial phyla Firmicutes with increment of 30.05-102.06% in the thermophilic phase. Kroppenstedtia, Thermobifida and Saccharomonospora were observed to be dominant at the maturing phase and correlated with NH₄⁺-N, NO₂^--N, TN and NO₃^--N. Therefore, they might be regarded as probable biomarkers symbolic for the maturing phase during FWD composting. The compost product had the highest maturity degree in 1.0% PAAS treatment. These results indicated that PAAS addition improved the maturity and nutrient contents of the compost product as well as altered compost bacterial community dynamics.

Wine Minerality and Funkiness: Blending the Two Tales of the Same Story

In wines, minerality is a complex concept with increasing popularity in scientific research and the wine press. The flavour conceptual space of mineral wines comprises sulphur-reduced aromas, such as flint, wet stone or chalk associated with freshness and lingering mouth perceptions. Professionals do not consider the perception of sulphur-reduced flavours as an off-flavour. Indeed, this sort of reduction is a cue for the recognition of minerality under a likely top-down mental process. However, untrained consumers perceive these aromas as unpleasant. This different qualitative assessment hampers the communication between professionals and amateurs. This review aimed to describe the perceptions of minerality by experts and novices to promote their mutual understanding. Funkiness is proposed as a descriptor of mineral wines when tasted by unexperienced consumers. The chemical basis of minerality and winemaking options were explored to understand their implications on sensory perception. Mineral flavours have two main features. The first comprises ephemeral aromas that may be described as funky, given their association with sulphur-reduced molecules. The second is linked to the fresh and vivacious lingering mouthfeel perceptions that remain after the reductive aromas vanish. Consumers recognise this dual perception by demonstrating positive emotional responses of surprise during tasting. Then, the perception of minerality is a question of cognition and not of particularly developed sensory skills. Appropriate tasting approaches encompassing emotional responses and emergent properties (e.g., harmony, depth, persistence, complexity) appear essential to understand the nature of wine minerality and to determine when it may be regarded as a surrogate for fine wine quality.

Migration and transformation of main components during perishable waste bio-drying process

Bio-drying can significantly reduce the moisture content of waste. The factors, functional microorganisms, and the transformation of main components were investigated during bio-drying of perishable waste. This study provides a scientific basis for the improvement of the bio-drying process and the necessity for secondary pollutant control. Reaction temperature and microbial biomass were main factors during the bio-drying process. The ideal bio-drying conditions included an initial temperature above 20 °C, intermittent ventilation, and appropriate microbial inoculation. The main microorganisms included Alcaligenes, Aquamicrobium, and Brevundimonas. From each gram of the carbonaceous, nitrogenous, sulfur-containing compounds, and phosphorus-containing substances in the perishable waste, approximately 0.74 g, 0.66 g, 0.40 g, and 0.94 g, respectively, were transferred as gas-phase products; consisting mainly of ammonia and volatile organic compounds: 2-heptanone, dimethyl heptanone, and benzene. In the leachate, the respective amounts of the carbonaceous, nitrogenous, sulfur-containing compounds, and phosphorus-containing substances were 3.20 × 10^-3 g, 4.08 × 10^-3 g, 0.33 g, and 9.52 × 10^-3 g, while those of the residual substances remaining in solid were 0.26 g, 0.33 g, 0.28 g, and 0.05 g.

Evaluation of bacterial agent/nitrate coupling on enhancing sulfur conversion and bacterial community succession during aerobic composting

This study evaluated the coupling effects of sodium nitrate (SN) and sulfur-oxidizing bacterial agent (BA) on oxidizing reduced-state sulfur and altering the bacteria community in SN, BA, and SN + BA treatments, respectively. Results revealed that bacterial inoculation prolonged the thermophilic period, facilitated organics degradation and compost humification. Compared to the control group, SN + BA treatment reduced the cumulative H₂S emissions and sulfur loss rate by 55.1 % and 15.7 %, respectively, and the nitrate reduction (used as electron donors) efficiency was enhanced by 7.8 % during the first week of composting. Bacterial inoculation altered the diversities and structure of the bacterial community by increasing the relative abundances of thermotolerant bacteria. Correlation analyses showed that the dominant phyla involved in nitrate-based sulfur-oxidizing reactions could be Firmicutes and Synergistota. These findings suggested the application viability of SN and BA to regulate the sulfur biotransformation and bacterial community in composting.

In-situ untilization of nitrogen-rich wastewater discharged from a biotrickling filter as a moisture conditioning agent for composting: Effect of nitrogen composition

Although the composting-biotrickling filter coupled system removed ammonia-based odor pollution, other pollutants (nitrogen-rich wastewater) arose. This study intended to determine the effect of in-situ disposal of different kinds of nitrogen-rich wastewater [i.e., multi-nitrogen (NH₄⁺, NO₂^-, and NO₃^-)-rich (STL1), NO₂^--rich (STL2), and NO₃^--rich (STL3)] as a moisture adjustment agent during the composting thermophilic period on nitrogen transformation. Results indicated that nitrogen-rich wastewater addition did not impair the compost maturation, whereas raised the total nitrogen content of fertilizer by 15.8%-46.7% compared to the control group (i.e., tap water group). Moreover, adding STL1 has the potential to reduce CO₂ and NH₃ emissions and avoid incomplete organic nitrogen decomposition. Furthermore, nitrogen flow analysis unveiled that STL1 addition increased nitrogen content by strengthening ammonification, dissimilatory nitrite reduction to ammonium, and high-temperature nitrification pathways. Thus, in-situ disposal of STL1 from biotrickling filters via composting is a suitable technique for coupled systems to achieve zero discharge.

Environmental implications, potential value, and future of food-waste anaerobic digestate management: A review

Globally, the valorisation of food waste into digestate through the process of anaerobic digestion is becoming increasingly popular. As a result, a large amount of food-waste digestate will need to be properly utilised. The utilisation of anaerobic digestion for fertiliser and alternative uses is essential to obtain a circular bioeconomy. The review aims to examine the environmental management of food-waste digestate, the value of digestate as a fertiliser and soil conditioner, and the emerging uses and improvements for post-anaerobic digestion reuse of digestate. Odour emissions, contaminants in food waste, emission and leaching of nutrients into the environment, and the regulations, policies, and voluntary initiatives of anaerobic digestion are evaluated in the review. Food-waste digestate can provide essential nutrients, carbon, and bio-stimulants to soils and increase yield. Recently, promising research has shown that digestates can be used in hydroponic systems and potentially replace the use of synthetic fertilisers. The integration of anaerobic digestion with emerging uses, such as extraction of value-added products, algae cultivation, biochar and hydrochar production, can further reduce inhibitory sources of digestate and provide additional economic opportunities for businesses. Moreover, the end-product digestate from these technologies can also be more suitable for use in soil application and hydroponic use.

Chemical identification and quantification of volatile organic compounds emitted by sewage sludge

The recycling of organic waste products (e.g. sewage sludge, SS) is currently being promoted as a substitute for mineral fertilizers for agricultural lands. The spreading of SS allows the recycling of the nutrients and organic matter it contains. SS contains various pollutants such as volatile organic compounds (VOCs) that adversely affect the ecosystem and human health through ozone production and serve as critical precursors of atmospheric secondary organic aerosols. There are very few studies quantifying the gaseous compounds emitted from SS, and those studies primarily address their odorant properties for identifying suitable odour abatement techniques. There is an urgent need for more comprehensive quantitative information on VOCs emitted from SS as aerosol precursors. In this context, an experimental study was performed on SS samples taken from a wastewater treatment plant located in France. Undigested SS (UDSS), digested SS (DSS) and SS with 30% and 60% dryness were collected from different stages of treatment sequence and analyzed using atmospheric simulation chambers coupled to proton-transfer-reaction quadrupole ion-guide time-of-flight mass spectrometer. Our study revealed that SS samples emitted a large spectrum of VOCs. 380 compounds were detected, quantified and classified into different chemical groups. The VOC emissions increased with the increase in the dryness of the sample; the highest being in SS 60%, followed by SS 30%, UDSS and DSS. OVOCs were dominant in SS 60%. The statistical analysis showed that the anaerobic digestion and the dewatering to 60% of dryness decreased the emissions of sulphuric compounds. Aromatic compounds and indoles (e.g. skatole) were emitted significantly from the UDSS. Some of these VOCs can serve as precursor gases for atmospheric aerosol formation. The experimental dataset obtained in this study provides an accurate inventory reference for the VOC emissions from SS samples and shows the impacts of the treatment on emission characteristics of VOCs.

Inhibitory Effects of the Addition of KNO3 on Volatile Sulfur Compound Emissions during Sewage Sludge Composting

Odor released from the sewage sludge composting process often has a negative impact on the sewage sludge treatment facility and becomes a hindrance to promoting compost technology. This study investigated the effect of adding KNO₃ on the emissions of volatile sulfur compounds, such as hydrogen sulfide (H₂S), dimethyl sulfide (DMS), and carbon disulfide (CS₂), during sewage sludge composting and on the physicochemical properties of compost products, such as arylsulfatase activity, available sulfur, total sulfur, moisture content, and germination index. The results showed that the addition of KNO₃ could inhibit the emissions of volatile sulfur compounds during composting. KNO₃ can also increase the heating rate and peak temperature of the compost pile and reduce the available sulfur loss. The addition of 4% and 8% KNO₃ had the best effect on H₂S emissions, and it reduced the emissions of H₂S during composting by 19.5% and 20.0%, respectively. The addition of 4% KNO₃ had the best effect on DMS and CS₂ emissions, and it reduced the emissions of DMS and CS₂ by 75.8% and 63.0%, respectively. Furthermore, adding 4% KNO₃ had the best effect from the perspective of improving the germination index of the compost.

Development and application of high resolution mass spectrometry analytical method to study and identify the photoinduced transformation products of environmental pollutants

Terpenes are among the major causes of pleasant or unpleasant odors close to active or inactive landfills. We studied R-limonene and p-cymene environmental degradation products using the heterogeneous photocatalysis mediated by titanium dioxide to explore the odor pollution. The aim of the study was the development of mass spectrometry based methods both hyphenated with GC and HPLC to identify and characterize transformation products (TPs) derived from photodegradation of R-limonene and p-cymene. With the GC-MS method we identified three TPs for R-limonene and two for p-cymene comparing the obtained mass spectra with those in the NIST library. While with HPLC-MS method, thanks to the use of the high resolution of MS tool, we recognized four and five TPs for R-limonene and p-cymene respectively. No p-cymene was detected as R-limonene transformation product. The methods developed were then applied to real environmental samples coming from landfills active (Lan1) or inactive (Lan2 and Lan3) located in northern Italy. R-limonene was detected in the active landfill (Lan1 at the concentration of 2.35 μg/mL) together with one of its TPs and one TP derived from p-cymene. p-Cymene was detected in the other two inactive landfills (Lan2 and Lan3 concentrations 0.025 and 0.15 μg/mL, respectively) together with one of its TP and two TPs coming from R-limonene photodegradation. The finding of TPs together with R-limonene and p-cymene both in active and inactive landfills point out the attention on the reduction of these molecules in the environment to reduce pollution and human risks.

Municipal solid waste management: Dynamics, risk assessment, ecological influence, advancements, constraints and perspectives

Global energy consumption has been increasing in tandem with economic growth, putting pressure on the world's supply of renewable energy sources. Municipal Solid waste (MSW) has been reported contributing immensely to the improvement of a secure environment and renewable sources. Energy scarcity and conventional MSW disposal methods in developing countries lead towards many environmental and economic issues. Scientists have been able to experiment with various waste-to-energy conversion technologies in light of this situation. This communication highlights and reviews WtE technologies to convert MSW and other feedstocks into electricity, hydrogen gas, bioethanol along with other value added products like fertilizer(s), platform chemicals as an environmentally friendly products. This review comprehensively summarized the dynamics, risk assessment, ecological influence, advancements, constraints and perspectives altogether in field of municipal solid waste management and treatment. Stare-of-the-art information on ecological influence and risk assessment in handling and transportation of municipal solid waste has been provided. Advanced trends involved in remediation of emerging pollutants and resources obtained from municipal solid wastes have been uncovered. Lastly, this paper comprises constraints and perspectives for uncovering MSW based circular bioeconomy aspects.

Odor emissions: A public health concern for health risk perception

The olfactory nuisance, due to the emissions of active molecules, is mainly associated with unproperly managed waste disposal and animal farming. Volatile compounds e.g., aromatics, organic and inorganic sulfide compounds, as well as nitrogen and halogenated compounds are the major contributor to odor pollution generated by waste management plants; the most important source of atmospheric ammonia is produced by livestock farming. Although an odorous compound may represent a nuisance rather than a health risk, long-term exposure to a mixture of volatile compounds may represent a risk for different diseases, including asthma, atopic dermatitis, and neurologic damage. Workers and communities living close to odor-producing facilities result directly exposed to irritant air pollutants through inhalation and for this reason the cumulative health risk assessment is recommended. Health effects are related to the concentration and exposure duration to the odorants, as well as to their irritant potency and/or biotransformation in hazardous metabolites. The health effects of a single chemical are well known, while the interactions between molecules with different functional groups have still to be extensively studied. Odor emissions are often due to airborne pollutants at levels below the established toxicity thresholds. The relationship between odor and toxicity does not always occurs but depends on the specific kind of pollutant involved. Indeed, some toxic agents does not induce odor nuisance while untoxic agents do. Accordingly, the relationship between toxicity and odor nuisance should be always analyzed in detail evaluating on the characteristics of the airborne mixture and the type of the source involved.

Characterizing Key Volatile Pollutants Emitted from Adhesives by Chemical Compositions, Odor Contributions and Health Risks

As one of the major sources of volatile pollutants in indoor air, gaseous emissions from adhesives during interior decoration have attracted increasing concern. Identifying major volatile pollutants and the risk in adhesive gaseous emissions is of great significance, but remains rarely reported. In the present research, we assessed the major volatile pollutants emitted from white emulsion adhesive and silicone adhesive samples (n = 30) from three aspects: chemical composition, odor and health risk contributions. The results showed that a total of 21 volatile pollutants were detected. Significantly, xylene was the most concentrated compound from white emulsion adhesives, accounting for 45.51% of the total concentrations. Butanone oxime was the most concentrated compound in silicone adhesives, accounting for 69.86% of the total concentrations. The trends in odor concentration (evaluated by the odor activity value method) over time were well correlated with the total chemical concentrations. Xylene (58.00%) and butanone oxime (76.75%) showed the highest odor contribution, respectively. Moreover, from an integrated perspective of chemical emissions, odor and health risk contributions, xylene, ethylbenzene, ethyl acetate and benzene were identified as the key volatile pollutants emitted from the white emulsion adhesives, while butanone oxime, butanone, and ethanol were the key volatile pollutants emitted from the silicone adhesives. This study not only identified the key volatile pollutants but also provided characteristics of odor and health risks of gas emitted from adhesives.

Diffusion simulation, health risks, ozone and secondary organic aerosol formation potential of gaseous pollutants from rural comprehensive waste treatment plant

Comprehensive waste treatment plants (CWTPs) are significant sources of gaseous pollutants such as odors, volatile organic compounds (VOCs) and nitrogen oxides (NOx), polluting the environment and endangering human health. This study conducted on-site investigations on gaseous pollutants emissions from different areas of a CWTP. A total of 10 pollutants were identified of which ammonia (11.32 mg/m³ in average) was the main odorous substance, and benzene (19.51 mg/m³ in average) and toluene (42.07 mg/m³ in average) were the main VOCs. The feeding workshop (FW) was considered the main source of gaseous pollutants. The Gaussian plume model demonstrated that the pollution became more serious after spreading in the southeast downwind direction. Occupational exposure risks of on-site workers were mainly attributed to hydrogen sulfide, ammonia, benzene, and toluene, as their hazard index (HI) and lifetime cancer risk (CR) exceeded the recommended occupational safety limits. The gaseous pollutants diffused from CWTP may still pose a potential health risk to residents within a range of up to 7.5 km. The emulation and quantification of ozone formation potential by methods of Propyl-Equiv and MIR demonstrated that the contribution rate of toluene presented in each stage of CWTP exceed 80 %. Toluene was also the largest contributor to secondary organic aerosol with the contribution rate reached 56.34-85.14 %, followed by benzene (14.72-38.52 %). This research provides a basis for the reduction and control of gaseous pollutants in the treatment and disposal of rural domestic waste.

Food waste digestate composting: Feedstock optimization with sawdust and mature compost

Direct land application of food waste digestate (FWD) leads to 60-70% of nitrogen loss through NH₃ volatilization due to its innate characteristics like high ammonium nitrogen (NH₄⁺-N) (~6000 mg/kg dry matter) and high moisture content (~75%). Hence, bio stabilization of FWD through composting is a promising solution to curb the environmental and occupational hazards. Hence the aim of this study was to assess the feasibility of using sawdust and/or mature compost as a bulking agent to achieve effective composting. The results showed that mixing of FWD with sawdust alone or together with mature compost could produce quality compost with reduced NH₄⁺-N (<700 mg/kg dry matter) and increased seed germination index (>80%) within 2 weeks of co-composting. Composting FWD with both sawdust and mature compost effectively reduced ~ 83% of NH₃ volatilization demonstrating that this approach can effectively produce mature nitrogen enriched FWD compost.

Composting-a solution of eliminating a nitrite-rich wastewater by reusing it as a moisture conditioning agent

Composting could be applied to dispose various organic solid wastes and liquid wastes. Literature suggested that reusing a nitrogen-rich wastewater as a composting moisture conditioning agent could promote the maturity and nitrogen content of compost. However, it's unclear whether a nitrite-rich wastewater could be eliminated by composting because of the toxicity of nitrite. In this study, a nitrite-rich wastewater (STL, pH = 7.9) was reused as a composting moisture conditioning agent. The influence of STL reusing period (i.e., adding STL from the first day of mesophilic, thermophilic, and cooling period, and the addition lasted for 10 days) on composting performance was also discussed. Results revealed that organic matter decomposition was strongly suppressed by high concentration of free nitrous acid when STL was added in mesophilic period, whereas the organic matter hydrolysis was prompted when STL was added in thermophilic and cooling period. STL addition enhanced nitrification at high temperatures during composting, thus increasing the nitrate content of compost by 2-10 times compared with that of the control group (using tap water as a moisture conditioning agent). Nitrite addition also stimulated nitrous oxide emissions yielded by biotic or chemical processes during STL addition, especially under the transient condition at 50°C-55 °C, and resulted in a 28%-39% increase in greenhouse gas emissions compared with that of the control group. Therefore, the composting could be a solution of eliminating a nitrite-rich wastewater by reusing it as a moisture conditioning agent when nitrous oxide emission issue was properly addressed.

Sustainable management and recycling of food waste anaerobic digestate: A review

Anaerobic digestion (AD) is a widely used technology to valorise food waste for biogas production yet a considerable amount of digestate remains under-utilised. Sustainable management and recycling of the nutrient-rich food waste anaerobic digestate (FWD) is highly desirable for closing resource loop and actualising circular economy. This work reviews the distinct properties of FWD and the existing treatment technologies. FWD shows great prospects as a nutrient source for microalgal cultivation and biofuel production. Emerging technologies such as thermal conversion (e.g., pyrolysis and hydrothermal treatment) of FWD into value-added products such as functionalised biochar/hydrochar with diverse applications would be attractive and warrant further research investigation. Integrated AD with subsequent valorisation facilities is highly encouraged to achieve complete utilisation of resources and reduce carbon emissions.

Volatile sulfur compound emissions and health risk assessment from an A2/O wastewater treatment plant

Anoxic/anaerobic/oxic (A²/O) wastewater treatment has emerged as a major process for treatment of domestic wastewater. One of the issues with wastewater treatment plants (WWTPs) is that volatile sulfur compounds (VSCs) are discharged from them and pose numerous health risks. This study characterized VSC emissions at the water-air interface and concentrations of ambient air exposure from different treatment units in an A²/O WWTP. AERMOD modeling was used to simulate the atmospheric behaviors of discharged VSCs. Results demonstrated that VSC emission fluxes and exposure concentrations had followed a descending order of pretreatment>biological treatment>advanced treatment. Emissions were affected by sulfate concentrations and chemical oxygen demand in the wastewater, and control strategies based on these values were proposed. The AERMOD results indicated that the majority of the total hydrogen sulfide (87%) and methyl mercaptan (65%) emissions came from the primary sedimentation tank, while the majority of dimethyl sulfide (81%), carbon disulfide (84%), and dimethyl disulfide (93%) were emitted from the oxic area. MT and DMS were the main odorous components of the VSCs in ambient air based on the indicator of odor activity values. Noncancer health risks, determined by having a hazard quotient >1, of the measured VSCs were beyond acceptable limits. Overall, efforts should be made to minimize noncancer health risks as individuals are exposed to VSCs not only in treatment units but also in areas surrounding WWTPs.

Recruiting, training and managing a sensory panel in odor nuisance testing

A growing level of environmental awareness in societies has led to an increased interest in the odor nuisance. Residents’ complaints have ultimately revealed the need to develop adequate research methods that would ensure objective measurements, thus shedding more light on this complex problem. One of the possible ways to conduct an objective odor assessment is to use a sensory panel in the tests. This paper presents the procedure for selecting and training the sensory analysis team especially for the purposes of odor nuisance testing. Several useful suggestions for conducting studies that involve a sensory panel are also provided. This in turn can prove a useful tool, supplementing the EN 13725 standard within the scope of building and convening a sensory panel. In this paper a performance comparison of two sensory panels is also discussed: one that received a basic training of 20h, solely based on the guidelines of the EN 13725 standard and another, whose members completed an extended training of 60h, based on the standards and guidelines used in the field of sensory analysis. It has been shown that acquiring more knowledge and developing certain competences in the field of sensory analysis may contribute to an increase in the overall and individual precision of determinations as adequate sensory training improves the panel’s performance.

Gaseous Emissions from the Composting Process: Controlling Parameters and Strategies of Mitigation

Organic waste generation, collection, and management have become a crucial problem in modern and developing societies. Among the technologies proposed in a circular economy and sustainability framework, composting has reached a strong relevance in terms of clean technology that permits reintroducing organic matter to the systems. However, composting has also negative environmental impacts, some of them of social concern. This is the case of composting atmospheric emissions, especially in the case of greenhouse gases (GHG) and certain families of volatile organic compounds (VOC). They should be taken into account in any environmental assessment of composting as organic waste management technology. This review presents the relationship between composting operation and composting gaseous emissions, in addition to typical emission values for the main organic wastes that are being composted. Some novel mitigation technologies to reduce gaseous emissions from composting are also presented (use of biochar), although it is evident that a unique solution does not exist, given the variability of exhaust gases from composting.

Odour Nuisance at Municipal Waste Biogas Plants and the Effect of Feedstock Modification on the Circular Economy—A Review

The increase in the amount of municipal solid waste (MSW) generated, among other places, in households is a result of the growing population, economic development, as well as the urbanisation of areas with accompanying insufficiently effective measures to minimise waste generation. There are many methods for treating municipal waste, with the common goal of minimising environmental degradation and maximising resource recovery. Biodegradable waste, including selectively collected biowaste (BW), also plays an essential role in the concept of the circular economy (CE), which maximises the proportion of waste that can be returned to the system through organic recycling and energy recovery. Methane fermentation is a waste treatment process that is an excellent fit for the CE, both technically, economically, and environmentally. This study aims to analyse and evaluate the problem of odour nuisance in municipal waste biogas plants (MWBPs) and the impact of the feedstock (organic fraction of MSW-OFMSW and BW) on this nuisance in the context of CE assumptions. A literature review on the subject was carried out, including the results of our own studies, showing the odour nuisance and emissions from MWBPs processing both mixed MSW and selectively collected BW. The odour nuisance of MWBPs varies greatly. Odour problems should be considered regarding particular stages of the technological line. They are especially seen at the stages of waste storage, fermentation preparation, and digestate dewatering. At examined Polish MWBPs cod ranged from 4 to 78 ou/m3 for fermentation preparation and from 8 to 448 ou/m3 for digestate dewatering. The conclusions drawn from the literature review indicate both the difficulties and benefits that can be expected with the change in the operation of MWBPs because of the implementation of CE principles.

Identification of origins and influencing factors of environmental odor episodes using trajectory and proximity analyses

It is challenging for the governmental agencies to provide an instant response and to systematically analyze the huge number of odor complaints which are received frequently by them. This study aimed to establish a data analysis framework featuring trajectory and proximity analyses to confirm odor origins, assess impact areas, and identify determinants and mechanisms of odor episodes based on odor reports. The investigation used 273 odor complaints reported in northern Collierville, Tennessee, between January 1st, 2019 and December 15th, 2020. The location of each complaint was geocoded in Google Map, and the backward wind trajectories were calculated using the web-based Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The nearby Eplex Landfill and Collierville Northwest Sewage Treatment Plant were targeted for the analyses. Odor impacts were evaluated with temporal and spatial characteristics of reported odor episodes. Logistic models were performed to identify weather parameters that significantly influenced odor occurrence. The field inspections indicated two periods targeting different sources. Period 1: from January 1st, 2019 to October 31st, 2020, the landfill appeared as the major source; Period 2: from November 1st, 2020 to December 15th, 2020, the sewage plant emerged as the major source. In Period 1, 65% of the complaints had wind transporting from the landfill, and 88% occurred at residences within 500 m of the landfill. In Period 2, 33% of the complaints had wind that blew from the sewage plant and 85% occurred at residences within 1000 m from the sewage plant. The likelihood of an odor episode day was significantly associated with wind speed [Odds Ratio (OR) = 0.66, 95% Confidence Interval (CI): 0.56-0.77], temperature (OR = 0.97, 95% CI: 0.95-0.98), and rainfall (OR = 1.02, 95% CI: 1.00-1.04). The odor issue in Collierville reflected poor zoning between the odor sources and residential areas. Separation distances of 500 m and 1000 m from the landfill and sewage facilities, respectively, are suggested to prevent odor issues. The proposed data analysis framework can be adopted by governmental agencies for fast responses to odor complaints, odor assessment, and environmental odor management.

A review on nitrogen dynamics and mitigation strategies of food waste digestate composting

Food waste digestate is a by-product of the anaerobic digestion of food waste. Presence of high ammonium nitrogen content significantly increase the nitrogen loss upon direct application on soil or by conventional composting. In this review, a comprehensive discussion regarding the effective management of food waste digestate is outlined, in which global food waste digestate production, characteristics, and composting are discussed. The nitrogen dynamics cycle considering high ammonium nitrogen content in the digestate is also evaluated, including ammonification, nitrification, denitrification, and other possible mechanisms based on the current literature. Mitigation strategies for reducing nitrogen loss via C/N ratio adjustment and the addition of physical, chemical, and microbial amendments were evaluated and estimated for 15 countries based on the available data on food waste anaerobic digestion plants. Reduced nitrogen loss and high quality compost could be produced from food waste digestate by adapting mitigation strategies.

The Use of Chemical Sensors to Monitor Odour Emissions at Municipal Waste Biogas Plants

Municipal waste treatment plants are an important element of the urban area infrastructure, but also, they are a potential source of odour nuisance. Odour impact from municipal waste processing plants raises social concerns regarding the well-being of employees operating the plants and residents of nearby areas. Chemical methods involve the determination of the quantitative composition of compounds comprising odour. These methods are less costly than olfactometry, and their efficiency is not dependent on human response. The relationship between the concentration of a single odorant and its odour threshold (OT) is determined by the odour activity value (OAV) parameter. The research involved the application of a multi-gas detector, MultiRae Pro. Measurements by means of the device were conducted at three municipal waste biogas plants located in Poland. In this paper we describe the results obtained when using a detector during the technological processes, the unitary procedures conducted at the plants, and the technological regime. The determination of these relationships could be useful in the development of odour nuisance minimization procedures at treatment plants and the adjustment to them. This is of paramount importance from the viewpoint of the safety and hygiene of the employees operating the installations and the comfort of residents in the areas surrounding biogas plants. Monitoring of expressed odorant emissions allows the course of technological processes and conducted unit operations to be controlled.

Evaluation of Inoculated Waste Biological Stabilization Degree by Olfactometric Methods

As a result of compounds’ transformation in the waste biostabilization phases, there is an increase in odor nuisance and health problems among people exposed to odorants. Linking the odor concentration to the degree of waste biostabilization may be an important tool for the assessment of individual technological variants of biostabilization. The study aimed to link the odor emissions to the biostabilization degree in individual process variants that differed in the inoculum. The tests were carried out on inoculated windrows on the waste mechanical-bological treatment open site. Odor concentrations were measured during the entire seven-week process of biostabilization (weeks 1–7) and compared with kinetics parameters of organic compounds’ decomposition. The olfactometric tests showed the necessity of using the preparation to reduce the value of odor concentration. Research proved that the decrease of odor concentration values could be useful to indicate the particular phases of biostabilization. Also, the proposed method provides an opportunity to optimize the process concerning the function related to the low degree of odor nuisance of the technologies, including selection of environmentally safe inoculum. This issue has application values that may result in the implementation of new control systems for waste stabilization bioreactors and the evaluation of applied technological solutions.

Challenges and Control Strategies of Odor Emission from Composting Operation

Composting is a biological decomposition process that occurs from microbial progression, which brings about the degradation and stabilization of various organic waste into compost. During composting, the emission of undesirable odor adversely affects compost quality and causes environmental deterioration. Also, odor emission from composting adversely affects human health and well-being. Ammonia (NH₃), volatile organic compounds (VOCs), and hydrogen sulfide (H₂S) are major components of odorous gases responsible for unpleasant odor. Physiological parameters such as pH, temperature, and aeration affect the pattern of odor emission during the composting process. The lack of techniques for the accurate identification and estimation of odor and control are some major challenges associated with composting. Therefore, the present review article concentrates on challenges and solutions to odor control. Biotrickling filter, optimization of process parameters, usage of additives, microbial inoculation, and pre-treatment techniques are practiced to lower odor emission during the process. The application of metagenomics may provide insight into the various biogeochemical pathways that can be explored in the future for odor control.

Integral evaluation of granular activated carbon at four stages of a full-scale WWTP deodorization system

Odor emissions from wastewater treatment plants (WWTPs) have always been a public concern. In this work, the physico-chemical, olfactometric and textural characterization of granular active carbon (GAC) used by an urban WWTP as a deodorization system, as well as the chromatographic quantification of the retained odoriferous compounds, have been carried out. These techniques have allowed an integral evaluation of the contaminated GAC and the characterization of the retained gaseous emission from four different stages of the wastewater treatment (pretreatment header: GAC-1; sand and fat removal: GAC-2; sludge thickening: GAC-3; sludge dehydration: GAC-4). A larger amount and variety of retained odoriferous compounds were found in GAC samples from the wastewater line deodorization (GAC-1 and GAC-2) after the same operation time (one year), GAC-1 being the adsorbent bed that retained the highest mass of volatile compounds (approximately 150μg/g GAC). Furthermore, some variables such as the removed specific odor concentration and free micropore volume were inversely correlated (R²=0.9945). The analysis of odor contribution showed that sulfur-containing compounds were the major odor contributors (61-97%). However, hydrogen sulfide cannot be considered a key odorant in this particular WWTP, since the elimination of this compound does not reduce the significant contribution of other (organic) sulfur compounds to the global odor (especially dimethyl disulfide). Consequently, multi-technical analysis might be a suitable alternative to better understand odor removal by GAC adsorption.

Comparison of molecular transformation of dissolved organic matter in vermicomposting and thermophilic composting by ESI-FT-ICR-MS

The aim of this study was to investigate the effects of vermicomposting (VC) and thermophilic composting (TC) on the molecular transformation of dissolved organic matter (DOM). Here, the DOM after VC and TC (DOM_v and DOM_t, respectively) was characterized using electrospray ionization coupled with Fourier transform ion cyclotron resonance mass spectrometry (ESI-FT-ICR-MS). The results indicated that VC could improve the preservation of nitrogen and the humification of DOM compared with TC. Concurrently, VC facilitated the formation of highly oxidized molecules (O/C = 0.4-0.9) by enhancing the oxidation. The aromatized molecules in each component were more easily generated during VC, especially N-containing aromatized molecules (39.4-58.0%), thereby improving the quality of compost products. Furthermore, this study found that VC could reduce the anaerobic microsites in pile, thus increasing nominal oxidation state of carbon (NOSC) of organic matter and promoting the decomposition of high-energy substrates (mainly lipids, NOSC = - 1.7~- 1.3). These findings provided new molecular insights that VC can significantly improve the oxidation of organic matter and the preservation of nitrogen. Graphical abstract.

Residuals, sludge, and biosolids: Advancements in the field

Advancements in the field of residuals, sludge, and biosolids have been made in 2019. This review outlines the major contributions of researchers that have been published in peer-reviewed journals and conference proceedings throughout 2019 and includes brief summaries from over 125 articles. The review is organized in sections including life cycle and risk assessments; characteristics, quality, and measurement including micropollutants, nanoparticles, pathogens, and metals; sludge treatment technologies including dewatering, digestion, composting, and wetlands; disposal and reuse including adsorbents, land application and agricultural uses, nutrient recovery, and innovative uses; odor and air emissions; and energy issues.

Factors affecting gaseous emissions, maturity, and energy efficiency in composting of livestock manure digestate

This study investigated the interplay effects of key operational factors on maturity, gaseous emissions, and energy efficiency during composting of livestock manure digestate. Orthogonal experiments were conducted with three factors: digestion duration (15, 30, 45 days), corn stalk addition (15%, 25%, 35%, wet weight based), and aeration rate (0.12, 0.24, 0.48 L kg^-1 dry matter (DM) min^-1). Results showed that digestion duration was the main factor influencing the compost germination index (GI), greenhouse gases (GHGs) emission, and net energy. Digestion duration of 30 days was favored for compost GI and GHG reduction, while digestion duration of 45 days exhibited 18% higher daily net energy. Increasing corn stalk addition and aeration rates improved compost GI, but increased energy consumption. Corn stalk addition of 25% and aeration rate of 0.24 L kg^-1 DM min^-1 could ensure desirable compost maturity and save energy consumption. Thus, digestion for 30 days, 25% corn stalk addition, and aeration rates of 0.24 L kg^-1 DM min^-1 can be potentially implemented in industry for environmental and cost efficient composting of digestate.

The Impact of Technological Processes on Odorant Emissions at Municipal Waste Biogas Plants

Municipal waste treatment is inherently associated with odour emissions. The compounds characteristic of the processes used for this purpose, and at the same time causing a negative olfactory sensation, are organic and inorganic sulphur and nitrogen compounds. The tests were carried out at the waste management plant, which in the biological part, uses the methane fermentation process and is also equipped with an installation for the collection, treatment, and energetic use of biogas. The tests include measurements of the four odorant concentrations and emissions, i.e., volatile organic compounds (VOCs), ammonia (NH3), hydrogen sulphide (H2S), and methanethiol (CH3SH). Measurements were made using a MultiRae Pro portable gas detector sensor. The tests were carried out in ten series for twenty measurement points in each series. The results show a significant impact of technological processes on odorant emissions. The types of waste going to the plant are also important in shaping this emission. On the one hand, it relates to the waste collection system and, on the other hand, the season of year. In addition, it has been proved that the detector used during the research is a valuable tool enabling the control of technological processes in municipal waste processing plants.

Changes in global trends in food waste composting: Research challenges and opportunities

Increasing food waste (FW) generation has put significant pressure on the environment and has increased the global financial costs of its appropriate management. Among the traditional organic waste recycling technologies (i.e., incineration, landfilling and anaerobic digestion), composting is an economically feasible and reliable technology for FW recycling regardless of its technical flaws and social issues. The global scenario of FW generation, technical advancement in FW composting and essential nutrient recovery from organic waste with waste recycling are discussed in this article. Recent research on various strategies to improve FW composting, including co-composting, the addition of organic/inorganic additives, the mitigation of gaseous emission, and microbiological variations are comprehensively explained. Subsequently, it is shown that the performing FW composting in an existing mechanical facility can improve organic waste degradation and produce value-added mature compost to save on costs and increase the technological feasibility and viability of FW composting to some extent.

Characterization of the Gaseous and Odour Emissions from the Composting of Conventional Sewage Sludge

Many different alternatives exist to manage and treat sewage sludge, all with the common drawback of causing environmental and odour impacts. The main objective of this work is to present a full inventory of the gaseous and odorous emissions generated during the bench-scale composting of conventional sewage sludge, aiming at assessing the process performance and providing global valuable information of the different gaseous emission patterns and emission factors found for greenhouse gases (GHG) and odorant pollutants during the conventional sewage sludge composting process. The main process parameters evaluated were the temperature of the material, specific airflow, average oxygen uptake rate (OUR), and final dynamic respiration index (DRI), resulting in a proper performance of the sewage sludge composting process and obtaining the expected final product. The obtained material was properly stabilized, presenting a final DRI of 1.2 ± 0.2 g O2·h−1·kg−1 Volatile Solids (VS). GHGs emission factor, in terms of kg CO2eq·Mg−1 dry matter of sewage sludge (DM–SS), was found to be 2.30 × 102. On the other hand, the sewage sludge composting odour emission factor (OEF) was 2.68 × 107ou·Mg−1 DM–SS. Finally, the most abundant volatile organic compounds (VOC) species found in the composting gaseous emissions were terpenes, sulphur compounds, ketones, and aromatic hydrocarbons, whereas the major odour contributors identified were dimethyldisulphide, eucalyptol, and α-pinene.