Interactions between engineered nanoparticles and dissolved organic matter: A review on mechanisms and environmental effects

Spatial distribution, temporal variations and source of titanium dioxide nanoparticles in Taihu Lake, China

The detrimental impacts of titanium dioxide nanoparticles (TiO2NPs) on the ecosystem and organisms have aroused great public concerns. However, the information on their concentration in the real aquatic environment is still limited, hindering the rational evaluation of their potential hazards. In this study, water samples from Taihu Lake were collected in June and November 2023, to investigate the spatial distribution and temporal variations of TiO2NPs. Using phosphorylated Fe3O4 particles based magnetic solid phase extraction and ICP-MS determination, high concentrations of TiO2NPs were detected in the western and northern regions of Taihu Lake. These areas contribute to 83 % of the total runoff into the lake. Total Ti levels were typically higher in November than in June, but no marked seasonal difference was observed for TiO2NPs. Different shapes of TiO2NPs with both smooth and rough surfaces were observed in the surface water. To further distinguish whether these TiO2NPs were sourced from the natural background or anthropogenic sources, the ratios of Ti to other rare elements including Nb were calculated. In November, the Ti/Nb ratios at most sampling sites were significantly higher than those in June, indicating that a large amount of engineered TiO2NPs are discharged into Taihu Lake during the summer and autumn seasons. Our study contributes to the understanding of contamination levels, spatial distribution, and temporal variation of TiO2NPs in lake systems, and provides valuable data for their further risk assessment.

Understanding the Interactions of Nanoparticles and Dissolved Organic Matter at the Molecular Level by 1H 2D Multi-Exponential Transverse Relaxation NMR Spectroscopy

The interaction between humic acid (HA) and engineered nanoparticles (NPs) is critical in environmental sciences, especially for understanding the behavior of NPs in natural waters. This study employs 1H 2D Multi-Exponential Transverse Relaxation (METR) NMR spectroscopy to examine the molecular-level interactions between Pahokee Peat humic acid (HA) and carboxyl-functionalized iron oxide nanoparticles (NPCOs). First, 1H 2D METR NMR spectroscopy allowed not only the identification of HA in terms of its chemical composition but also the separation of molecules with the same chemical shift values but different rates of molecular tumbling. Then, using solutions with varying NPCO concentrations (0, 10, 40, and 100 μM), we observed significant changes in the T2 relaxation times of HA components, indicating interactions between HA and NPCO. Analysis showed the biggest effect on two chemical shift regions, corresponding to lipids and carbohydrates, revealing that smaller molecules within these regions exhibit the most significant changes in T2 values upon the addition of NPCO. This suggests that these molecules are the initial sites of interaction, with the entire HA system being affected at higher NPCO concentrations. These findings highlight the utility of METR NMR spectroscopy in studying complex environmental mixtures and provide insights into the behavior of HA and NPs, essential for understanding the fate of NPs in the environment.

Impact of diatomit on the transport behavior of unmodified and carboxyl-modified nanoplastics in saturated porous media

Due to the extensive use of plastic products and unreasonable disposal, nanoplastics contamination has become one of the important environmental problems that mankind must face. The composition and structure of porous media can determine the complexity and diversity of the transport behavior of nanoplastics. In this study, the influence of diatomite (DIA) on the nanoplastics transport in porous media is investigated by column experiments combined with XDLVO interaction energy and transport model. Results suggest that the recovery rates of unmodified polystyrene nanoparticles (PSNPs) and carboxyl-modified polystyrene nanoparticles (PSNPs-COOH) in the porous media containing DIA decreases compared with that in the pure quartz sand (QS), and the BTCs showed a "blocking" pattern. The presence of DIA inhibits the transport of both PSNPs and PSNPs-COOH, but the inhibition is not significant. This may be because the presence of DIA provides more favorable deposition sites for PSNPs and PSNPs-COOH to some extent. However, since DIA itself carries a certain negative charge, this can only play a role in compressing the double electric layer for PSNPs and PSNPs-COOH with the same negative charge, and cannot destabilize them. The migration capacity of PSNPs and PSNPs-COOH is strongest in the DIA-QS porous media at pH = 7, and is weak at pH = 9 and pH = 5. The inhibition of migration at pH = 9 can be attributed to the dissolution of the DIA surface under alkaline conditions and the formation of pore and defect structures, which provide more deposition sites for PSNPs and PSNPs-COOH. The presence of humic acid (HA) leads to an increase in the mobility of PSNPs and PSNPs-COOH, and the mobility is enhanced with HA concentration. The mobility of PSNPs and PSNPs-COOH in DIA-QS decreases with ionic valence and ionic strength, and PSNPs-COOH is more significantly inhibited compared to PSNPs.

The combined effects of polystyrene nanoplastics and dissolved organic matter on the environmental bioavailability of carbamazepine

The bioavailability of active pharmaceutical ingredients (APIs) plays a crucial role in determining the toxicity and risk of contaminants in the environment. However, the bioavailability of APIs in complex environmental matrices is still unclear. In this study, the combined effects of polystyrene nanoplastics (PS NPs) with various particle sizes (50, 100, and 1000 nm) and fulvic acid (FA) on the bioavailability of carbamazepine (CBZ) were investigated via negligible depletion solid-phase microextraction (nd-SPME) and Daphnia magna (D. magna) accumulation. The uptake kinetic study revealed that both PS NPs and FA reduced the elimination rate (k2) in most cases. The availability of CBZ to nd-SPME was determined by the hydrodynamic particle size of PS NPs, whereas the bioavailability to D. magna depended on the intrinsic particle size. The CBZ bioavailability was greater in co-exposed matrices due to the attenuated sorption of PS NPs to CBZ by FA modification. Notably, co-exposure of PS NPs and FA resulted in a higher bioaccumulation factor (BAF) of CBZ, probably due to the desorption and reabsorption of particle-associated CBZ. This study demonstrated that both PS NP particle size and FA binding affect the bioavailability of CBZ, and nd-SPME can mimic only the bioaccumulation of CBZ via diffusion.

Organic matter excreted by the protozoan Tetrahymena thermophila and its effects on the bioaccumulation of nanoparticles

Although organic matter (exudate) excreted by aquatic organisms is an important component of dissolved organic matter (DOM) in the natural environment, its potential effects on the bioaccumulation of nanoparticles (NPs) remain unclear. In the present study, we examined the effects of the exudates from the protozoan Tetrahymena thermophila on the bioaccumulation (including uptake and cell surface adsorption) of iron oxide (Fe2O3, polyacrylate coated) and silica (SiO2) NPs in T. thermophila. The exudates were mostly (93.6 %, in carbon) composed of < 1-kDa molecules (e.g., lipids). When the exudates were mixed with the NPs, significant adsorption occurred on SiO2 NPs but not on Fe2O3 NPs. Independent of their adsorption by the NPs, the exudates significantly inhibited the bioaccumulation of both SiO2 NPs and Fe2O3 NPs by T. thermophila. This inhibitory effect was shown to be mainly due to their inhibition of NP adsorption on the cell surface. By contrast, the exudates had negligible effects on the uptake of either NP type, most likely due to their low molecular weight. Since DOM in the aquatic environment is dominated by molecules < 1 kDa, the potential effects of low-molecular-weight DOM, such as exudates from aquatic organisms, on the bioaccumulation of NPs merits greater attention. ENVIRONMENTAL IMPLICATION: Nanoparticles (NPs) are hazardous materials widespread in the natural environment. Previous studies showed that dissolved organic matter (DOM) in aquatic environments determine the environmental behavior and ecological effects of NPs. Although organic matter (exudate) excreted by aquatic organisms is an important component of DOM, its potential effects on the bioaccumulation of NPs remain unclear. In the present study, we found that the exudates inhibited the cell-surface adsorption of NPs but had no effects on NP uptake, as different from the well-known effects of DOM on NP bioaccumulation. This finding merits attention during evaluations of the environmental risks of NPs.

The colloidal stability of molybdenum disulfide nanosheets in different natural surface waters: Combined effects of water chemistry and light irradiation

With the increasing production and application, more molybdenum disulfide (MoS2) nanosheets could be released into environment. The aggregation and dispersion of MoS2 nanosheets profoundly impact their transport and transformation in the aquatic environment. However, the colloidal stability of MoS2 remains largely unknown in natural surface waters. This study investigated the colloidal stability of MoS2 nanosheets in six natural surface waters affected by both light irradiation and water chemistry. Compared to that of the pristine MoS2 nanosheets, the colloidal stability of MoS2 photoaged in ultrapure water declined. Light irradiation induced the formation of Mo-O bonds, the release of SO42- species, and the decrease in 1T/2H ratio, which reduced negative charge and enhanced hydrophobicity. However, the colloidal stability of MoS2 photoaged in natural surface waters was increased relative to that in ultrapure water not only for the smaller extent of photochemical transformation but more importantly the surface modification by water chemistry. Furthermore, the colloidal stability of MoS2 photoaged in natural surface waters followed the order of sea water > lake water > river water. The abundant cations (e.g., Ca2+ and Mg2+) in sea water facilitated the covalent grafting (S-C bonds) of more dissolved organic matter (DOM) on MoS2 via charge screening and cation bridging, thus inducing stronger electrostatic repulsion and steric effect to stabilize nanosheets. The crucial role of the covalent grafting of DOM was further confirmed by the positive correlation between the critical coagulation concentration values and S-C ratios (R2 = 0.82, p < 0.05). Our results highlighted the dominant role of water chemistry than light irradiation in dictating the colloidal stability of MoS2 photoaged in natural surface waters, which provided new insight into the environmental behavior of MoS2 in aquatic environment.

Changes in the Aggregation Behaviour of Zinc Oxide Nanoparticles Influenced by Perfluorooctanoic Acid, Salts, and Humic Acid in Simulated Waters

The increasing utilization of zinc oxide nanoparticles (ZnO-NPs) in many consumer products is of concern due to their eventual release into the natural environment and induction of potentially adverse impacts. The behaviour and environmental impacts of ZnO-NPs could be altered through their interactions with environmentally coexisting substances. This study investigated the changes in the behaviour of ZnO-NPs in the presence of coexisting organic pollutants (such as perfluorooctanoic acid [PFOA]), natural organic substances (i.e., humic acid [HA]), and electrolytes (i.e., NaCl and CaCl2) in simulated waters. The size, shape, purity, crystallinity, and surface charge of the ZnO-NPs in simulated water after different interaction intervals (such as 1 day, 1 week, 2 weeks, and 3 weeks) at a controlled pH of 7 were examined using various characterization techniques. The results indicated alterations in the size (such as 162.4 nm, 1 day interaction to >10 µm, 3 weeks interaction) and zeta potential (such as -47.2 mV, 1 day interaction to -0.2 mV, 3 weeks interaction) of the ZnO-NPs alone and when PFOA, electrolytes, and HA were present in the suspension. Different influences on the size and surface charge of the nanoparticles were observed for fixed concentrations (5 mM) of the different electrolytes. The presence of HA-dispersed ZnO-NPs affected the zeta potential. Such dispersal effects were also observed in the presence of both PFOA and salts due to their large aliphatic carbon content and complex structure. Cation bridging effects, hydrophobic interactions, hydrogen bonding, electrostatic interactions, and van der Waals forces could be potential interaction forces responsible for the adsorption of PFOA. The presence of organic pollutants (PFOA) and natural organic substances (HA) can transform the surface characteristics and fate of ZnO-NPs in natural and sea waters.

Effects of dissolved organic matter on the environmental behavior and toxicity of metal nanomaterials: A review

Metal nanomaterials (MNMs) have been released into the environment during their usage in various products, and their environmental behaviors directly impact their toxicity. Numerous environmental factors potentially affect the behaviors and toxicity of MNMs with dissolved organic matter (DOM) playing the most essential role. Abundant facts showing contradictory results about the effects of DOM on MNMs, herein the occurrence of DOM on the environmental process change of MNMs such as dissolution, dispersion, aggregation, and surface transformation were summarized. We also reviewed the effects of MNMs on organisms and their mechanisms in the environment such as acute toxicity, oxidative stress, oxidative damage, growth inhibition, photosynthesis, reproductive toxicity, and malformation. The presence of DOM had the potential to reduce or enhance the toxicity of MNMs by altering the reactive oxygen species (ROS) generation, dissolution, stability, and electrostatic repulsion of MNMs. Furthermore, we summarized the factors that affected different toxicity including specific organisms, DOM concentration, DOM types, light conditions, detection time, and production methods of MNMs. However, the more detailed mechanism of interaction between DOM and MNMs needs further investigation.

Species selective concentration and determination of nano-selenium and inorganic selenium species in environmental waters by micropore membrane filtration and ICP-MS

Accurate quantification of nano-selenium (nSe) and other ionic Se species in aquatic environments is a prerequisite for reliable estimation of their potential hazards. In this study, a micropore membrane filtration-based method followed by ICP-MS analysis was proposed for the selective concentration and determination of nSe in the water column. Polyvinylidene fluoride (PVDF) and nylon micropore filtration membranes were proven to efficiently capture nSe under optimal conditions (retention > 91.0 ± 0.87%). At the same time, ionic selenite and selenate could escape from the membranes, realizing the isolation of nSe and ionic Se species. The interference of dissolved organic matter (DOM) during separation can be resolved by adding Ca(II) ions, which can induce the formation of DOM aggregates by cation bridging effects. nSe retained on PVDF membranes could be effectively eluted with FL-70 (a powerful alkaline surfactant) aqueous solutions (0.5%, m/v) while maintaining the original size and morphology. Although nSe trapped on nylon membranes could not be easily eluted, quantification can also be achieved after membrane digestion. Speciation of ionic selenite and selenate in the filtrate was further conducted with an anion exchange column by using HPLC coupled with ICP-MS. The developed method was used to analyze Se species in six real water samples. Spiking experiments showed that the recoveries of nSe ranged from 70.2 ± 2.7% to 85.8 ± 1.3% at a spike level of 0.2 µg/L, and the recoveries of Se(IV) and Se(VI) ranged from 83.6 ± 0.5% to 101 ± 1% at a spike level of 0.55 µg/L, verifying the feasibility for the analysis of environmental water samples. This work provides possibilities to investigate the transformation and potential risks of nSe in the environment.

Biosynthesis and antibacterial activity of ZnO nanoparticles usingBuchanania obovatafruit extract and the eutectic-based ionic liquid

The fruit extract ofBuchanania obovataand the eutectic-based ionic liquid were utilized, in an eco-friendly, inexpensive, simple method, for synthesizing zinc oxide nanoparticles (ZnO NPs). The influence of the reducing, capping and stabilizing agents, in both mediums, on the structure, optical, and morphological properties of ZnO NPs was extensively investigated. The surface plasmon resonance peaks were observed at 340 nm and 320 nm for the fruit-based and the eutectic-based ionic liquid mediums, respectively, indicating the formation of ZnO NPs. XRD results confirmed the wurtzite structure of the ZnO NPs, exhibiting hexagonal phases in the diffraction patterns. The SEM and TEM images display that the biosynthesized ZnO NPs exhibit crystalline and hexagonal shape, with an average size of 40 nm for the fruit-based and 25 nm for the eutectic-based ionic liquid. The Brunauer-Emmett-Teller (BET) surface area analysis, revealed a value ∼13 m2g-1for ZnO NPs synthesized using the fruit extract and ∼29 m2g-1for those synthesized using the eutectic-based ionic liquid. The antibacterial activity of the biosynthesized ZnO NPs was assessed against clinically isolated Gram-negative (E. coli) and Gram-positive (S. aureus) bacterial strains using the inhibition zone method. The ZnO NPs produced from the eutectic-based ionic liquids confirmed superior antibacterial activity against bothS. aureusandE. colicompared to those mediated by the utilized fruit extract. At a concentration of 1000, the eutectic-based ionic liquid mediated ZnO NPs displayed a maximum inhibition zone of 16 mm againstS. aureus, while againstE. coli, a maximum inhibition zone of 15 mm was observed using the fruit extract mediated ZnO NPs. The results of this study showed that the biosynthesized ZnO NPs can be utilized as an efficient substitute to the frequently used chemical drugs and covering drug resistance matters resulted from continual usage of chemical drugs by users.

Effect of interaction between dissolved organic matter and iron/manganese (hydrogen) oxides on the degradation of organic pollutants by in-situ advanced oxidation techniques

Iron and manganese (hydrogen) oxides (IMHOs) exhibit excellent redox capabilities for environmental pollutants and are commonly used in situ chemical oxidation (ISCO) technologies for the degradation of organic pollutants. However, the coexisting dissolved organic matter (DOMs) in surface environments would influence the degradation behavior and fate of organic pollutants in IMHOs-based ISCO. This review has summarized the interactions and mechanisms between DOMs and IMHOs, as well as the properties of DOM-IMHOs complexes. Importantly, the promotion or inhibition impact of DOM was discussed from three perspectives. First, the presence of DOMs may hinder the accessibility of active sites on IMHOs, thus reducing their efficiency in degrading organic pollutants. The formation of compounds between DOMs and IMHOs alters their stability and activity in the degradation process. Second, the presence of DOMs may also affect the generation and transport of active species, thereby influencing the oxidative degradation process of organic pollutants. Third, specific components within DOMs also participate and affect the degradation pathways and rates. A comprehensive understanding of the interaction between DOMs and IMHOs helps to better understand and predict the degradation process of organic pollutants mediated by IMHOs in real environmental conditions and contributes to the further development and application of IMHO-mediated ISCO technology.

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Toxic effects of nSiO2 and mPS on diatoms Nitzschia closterium f. minutissima

To investigate the toxic mechanism of SiO2 nanoparticles (nSiO2) and polystyrene microplastics (mPS) on microalgae Nitzschia closterium f. minutissima, growth inhibition tests were carried out. The growth and biological responses of the algae exposed to nSiO2 (0.5, 1, 2, 5, 10, 30 mg L-1) and mPS (1, 5, 10, 30 and 75 mg L-1) were explored in f/2 media for 96 h. Both micro-/nano-particles (MNPs) inhibited the growth of N. closterium f. minutissima in a concentration- and time-dependent manner. The toxic effect of mPS on N. closterium f. minutissima is higher than that of nSiO2, because silicon is essential for diatoms to maintain cell wall integrity, and the addition of appropriate amounts of nSiO2 can be absorbed and used as a nutrient to promote diatom growth and protect the integrity of the siliceous shell to some extent. Both MNPs induce the production of excess oxidation and activate the cellular antioxidant defense system, leading to increased SOD and CAT activity as a means to resist oxidative damage to the cell, and eliminating excess ROS and maintaining normal cell morphology and metabolism. SEM is consistent with the results of MDA, showing that mPS with high concentrations attach to the surface of algal cells to produce heterogeneous aggregates and disrupt the cell wall and cell membrane, causing the cells to expand and rupture. This study contributes to the understanding of the size effect of MNPs on the growth of marine diatom.

Individual and binary exposure of embryonic zebrafish (Danio rerio) to single-walled and multi-walled carbon nanotubes in the absence and presence of dissolved organic matter

The available toxicological information was inadequate to assess the potential ecological risk of a mixture of different nanostructured carbon nanotubes (CNTs) to aquatic organisms, especially for the co-existence of mixed CNTs with dissolved organic matter (DOM). Herein, we investigated individual and binary exposure of zebrafish (Danio rerio) embryos to single-walled (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) in the absence and presence of DOM. Results indicated that embryonic chorions were more resistant to mixed-type CNTs than to single-type CNTs, yet the addition of DOM decreased this resistance. The mixed-type CNTs increased the antioxidant capacity of zebrafish embryos by increasing superoxide dismutase activity in comparison to the single-type CNTs. Furthermore, the mixed-type CNTs caused oxidative damage to the zebrafish embryos, characterized by an increase in malondialdehyde level. Nevertheless, the activation of the antioxidant defense system was modulated by the presence of DOM. Transcriptome sequencing analysis showed that the number of unique genes (UGs) and differentially expressed genes (DEGs) between the mixed-type CNTs and control groups was significantly enhanced compared to the single-type CNTs. DOM increased the number of UGs and up-regulated DEGs, but decreased the number of down-regulated DEGs. GO classification analysis revealed that the mixed-type CNTs mainly altered the cellular component process of single-type CNTs to induce joint effects. DOM generally enhanced the GO enrichment of DEGs in D. rerio embryos exposed to the mixed-type CNTs during the biological process. KEGG pathway enrichment analysis for the mixed-type CNTs showed enrichment of DEGs encoding ether lipid metabolism, glycerophospholipid metabolism, glycerolipid metabolism, citrate cycle, and biosynthesis of nucleotide sugars. However, DOM allowed more specific KEGG pathways towards the mixed-type CNTs to be identified. Despite the mixed-type CNTs exhibiting differential expression of functional genes compared to the control and single-type CNTs, DOM could regulate the expression of these functional genes associated with oxidative stress response, carbohydrate metabolism, endoplasmic reticulum stress, neuroendocrine, osmotic stress, and DNA damage and repair. Our study thus paves a solid way for exploring the molecular mechanism of aquatic toxicity of multiple nanomaterials under field-relevant conditions.

Componential and molecular-weight-dependent effects of natural organic matter on the colloidal behavior, transformation, and toxicity of MoS2 nanoflakes

The potential widespread applications in water processing have rendered the necessity for investigations of the fate and hazard of molybdenum disulfide (MoS2) nanosheets. Herein, it was found that humic acid (HA) had better performances toward stabilizing pure 2H phase MoS2 and chemical-exfoliated MoS2 (ce-MoS2) in electrolyte solutions than fulvic acid (FA), and molecular weight (MW)-dependent manners were disclosed due to steric repulsions. Compared with darkness, the extent to which the aggregation and sedimentation of ce-MoS2 facilitated by visible light irradiation was greater in the presence of HA and FA fractions, likely due to the introduction of stronger plasmonic dipole-dipole interaction and Van der Waals attraction forces. HA-triggered structural disintegration of nanosheets was performed after irradiation and it was observed to be more significant with the increase in MWs, whereas the MW-dependent dissolution of MoS2 caused by FA was much quicker than that by HA owing to the higher generation of singlet oxygen. Moreover, FA lowered the bioavailability of MoS2 and relieved its toxicity to zebrafish more effectively than HA. Our findings boost the insights into the effects of organic molecules on the fates and hazards of MoS2, providing guidance for the MoS2-based nanotechnological development on environment.

Single-Particle ICP-MS/MS Application for Routine Screening of Nanoparticles Present in Powder-Based Facial Cosmetics

The short- and long-term impacts of nanoparticles (NPs) in consumer products are not fully understood. Current European Union (EU) regulations enforce transparency on products containing NPs in cosmetic formulations; however, those set by the U.S. Food and Drug Administration are lacking. This study demonstrates the potential of single-particle inductively coupled plasma tandem mass spectrometry (spICP-MS/MS) as a screening method for NPs present in powder-based facial cosmetics (herein referred to as FCs). A proposed spICP-MS/MS method is presented along with recommended criteria to confirm particle presence and particle detection thresholds in seven FCs. FC products of varying colors, market values, and applications were analyzed for the presence of Bi, Cr, Mg, Mn, Pb, Sn, Ag, Al, and Zn NPs based on their ingredient lists as well as those commonly used in cosmetic formulations. The presence of NPs smaller than 100 nm was observed in all FC samples, and no correlations with their presence and market value were observed. Here, we report qualitative and semi-quantitative results for seven FC samples ranging in color, brand, and shimmer.

Recent trends and perspectives in the application of metal and metal oxide nanomaterials for sustainable agriculture

Sustainable ecosystem management leads to the use of eco-friendly agricultural techniques for crop production. One of them is the use of metal and metal oxide nanomaterials and nanoparticles, which have proven to be a valuable option for the improvement of agricultural food systems. Moreover, the biological synthesis of these nanoparticles, from plants, bacteria, and fungi, also contributes to their eco-friendly and sustainable characteristics. Nanoparticles, which vary in size from 1 to 100 nm have a variety of mechanisms that are safer and more efficient than conventional fertilizers. Their usage as fertilizers and insecticides in agriculture is gaining favor in the scientific community to maximize crop output. More studies in this field will increase our understanding of this new technology and its broad acceptance in terms of performance, affordability, and environmental protection, as certain nanoparticles may outperform conventional fertilizers and insecticides. Accordingly, to the information gathered in this review, nanoparticles show remarkable potential for enhancing crop production, improving soil quality, and protecting the environment, however, metal and metal oxide NPs are not widely employed in agriculture. Many features of nanoparticles are yet left over, and it is necessary to uncover them. In this sense, this review article provides an overview of various types of metal and metal oxide nanoparticles used in agriculture, their characterization and synthesis, the recent research on them, and their possible application for the improvement of crop productivity in a sustainable manner.

Aggregation and stability of selenium nanoparticles: Complex roles of surface coating, electrolytes and natural organic matter

The application of selenium nanoparticles (SeNPs) as nanofertilizers may lead to the release of SeNPs into aquatic systems. However, the environmental behavior of SeNPs is rarely studied. In this study, using alginate-coated SeNPs (Alg-SeNPs) and polyvinyl alcohol-coated SeNPs (PVA-SeNPs) as models, we systematically investigated the aggregation and stability of SeNPs under various water conditions. PVA-SeNPs were highly stable in mono- and polyvalent electrolytes, probably due to the strong steric hindrance of the capping agent. Alg-SeNPs only suffered from a limited increase in size, even at 2500 mmol/L NaCl and 200 mmol/L MgCl₂, while they underwent apparent aggregation in CaCl₂ and LaCl₃ solutions. The binding of Ca²⁺ and La³⁺ with the guluronic acid part in alginate induced the formation of cross-linking aggregates. Natural organic matter enhanced the stability of Alg-SeNPs in monovalent electrolytes, while accelerated the attachment of Alg-SeNPs in polyvalent electrolytes, due to the cation bridge effects. The long-term stability of SeNPs in natural water showed that the aggregation sizes of Alg-SeNPs and PVA-SeNPs increased to several hundreds of nanometers or above 10 µm after 30 days, implying that SeNPs may be suspended in the water column or further settle down, depending on the surrounding water chemistry. The study may contribute to the deep insight into the fate and mobility of SeNPs in the aquatic environment. The varying fate of SeNPs in different natural waters also suggests that the risks of SeNPs to organisms living in diverse depths in the aquatic compartment should be concerned.

Nanoparticulate pollutants in the environment: Analytical methods, formation, and transformation

The wide application of nanomaterials and plastic products generates a substantial number of nanoparticulate pollutants in the environment. Nanoparticulate pollutants are quite different from their bulk counterparts because of their unique physicochemical properties, which may pose a threat to environmental organisms and human beings. To accurately predict the environmental risks of nanoparticulate pollutants, great efforts have been devoted to developing reliable methods to define their occurrence and track their fate and transformation in the environment. Herein, we summarized representative studies on the preconcentration, separation, formation, and transformation of nanoparticulate pollutants in environmental samples. Finally, some perspectives on future research directions are proposed.

MeHg production in eutrophic lakes: Focusing on the roles of algal organic matter and iron-sulfur-phosphorus dynamics

The mechanisms by which eutrophication affects methylmercury (MeHg) production have not been comprehensively summarized, which hinders accurately predicting the MeHg risk in eutrophic lakes. In this review, we first discussed the effects of eutrophication on biogeochemical cycle of mercury (Hg). Special attentions were paid to the roles of algal organic matter (AOM) and iron (Fe)-sulfur (S)-phosphorus (P) dynamics in MeHg production. Finally, the suggestions for risk control of MeHg in eutrophic lakes were proposed. AOM can affect in situ Hg methylation by stimulating the abundance and activities of Hg methylating microorganisms and regulating Hg bioavailability, which are dependent on bacteria-strain and algae species, the molecular weight and composition of AOM as well as environmental conditions (e.g., light). Fe-S-P dynamics under eutrophication including sulfate reduction, FeS formation and P release could also play crucial but complicated roles in MeHg production, in which AOM may participate through influencing the dissolution and aggregation processes, structural order and surface properties of HgS nanoparticles (HgS_NP). Future studies should pay more attention to the dynamics of AOM in responses to the changing environmental conditions (e.g., light penetration and redox fluctuations) and how such variations will subsequently affect MeHg production. The effects of Fe-S-P dynamics on MeHg production under eutrophication also deserve further investigations, especially the interactions between AOM and HgS_NP. Remediation strategies with lower disturbance, greater stability and less cost like the technology of interfacial O₂ nanobubbles are urgent to be explored. This review will deepen our understanding of the mechanisms of MeHg production in eutrophic lakes and provide theoretical guidance for its risk control.

Toxicological Effects of Secondary Air Pollutants

Secondary air pollutants, originating from gaseous pollutants and primary particulate matter emitted by natural sources and human activities, undergo complex atmospheric chemical reactions and multiphase processes. Secondary gaseous pollutants represented by ozone and secondary particulate matter, including sulfates, nitrates, ammonium salts, and secondary organic aerosols, are formed in the atmosphere, affecting air quality and human health. This paper summarizes the formation pathways and mechanisms of important atmospheric secondary pollutants. Meanwhile, different secondary pollutants' toxicological effects and corresponding health risks are evaluated. Studies have shown that secondary pollutants are generally more toxic than primary ones. However, due to their diverse source and complex generation mechanism, the study of the toxicological effects of secondary pollutants is still in its early stages. Therefore, this paper first introduces the formation mechanism of secondary gaseous pollutants and focuses mainly on ozone's toxicological effects. In terms of particulate matter, secondary inorganic and organic particulate matters are summarized separately, then the contribution and toxicological effects of secondary components formed from primary carbonaceous aerosols are discussed. Finally, secondary pollutants generated in the indoor environment are briefly introduced. Overall, a comprehensive review of secondary air pollutants may shed light on the future toxicological and health effects research of secondary air pollutants.

Algal Extracts for Green Synthesis of Zinc Oxide Nanoparticles: Promising Approach for Algae Bioremediation

Zinc oxide nanoparticles (ZnO-NPs) possess unique properties, making them a popular material across various industries. However, traditional methods of synthesizing ZnO-NPs are associated with environmental and health risks due to the use of harmful chemicals. As a result, the development of eco-friendly manufacturing practices, such as green-synthesis methodologies, has gained momentum. Green synthesis of ZnO-NPs using biological substrates offers several advantages over conventional approaches, such as cost-effectiveness, simplicity of scaling up, and reduced environmental impact. While both dried dead and living biomasses can be used for synthesis, the extracellular mode is more commonly employed. Although several biological substrates have been successfully utilized for the green production of ZnO-NPs, large-scale production remains challenging due to the complexity of biological extracts. In addition, ZnO-NPs have significant potential for photocatalysis and adsorption in the remediation of industrial effluents. The ease of use, efficacy, quick oxidation, cost-effectiveness, and reduced synthesis of harmful byproducts make them a promising tool in this field. This review aims to describe the different biological substrate sources and technologies used in the green synthesis of ZnO-NPs and their impact on properties. Traditional synthesis methods using harmful chemicals limit their clinical field of use. However, the emergence of algae as a promising substrate for creating safe, biocompatible, non-toxic, economic, and ecological synthesis techniques is gaining momentum. Future research is required to explore the potential of other algae species for biogenic synthesis. Moreover, this review focuses on how green synthesis of ZnO-NPs using biological substrates offers a viable alternative to traditional methods. Moreover, the use of these nanoparticles for industrial-effluent remediation is a promising field for future research.

Dissolved Organic Matter and Lignin Modulate Aquatic Toxicity and Oxidative Stress Response Activated by Layered Double Hydroxides Nanomaterials

Advanced nanomaterials can be released into the environment and can coexist with natural organic matter (NOM). However, evidence on the impacts of NOM on the environmental behavior and toxicity of advanced nanomaterials is still scarce. Here, we investigated the behavior and toxic effects of two layered double hydroxides (LDHs) nanomaterials with different metallic constituents (Mg-Al-LDH and Zn-Al-LDH) at relatively low exposure concentrations on a freshwater green alga (Chlorella pyrenoidosa) in the absence and presence of two types of NOM, namely dissolved organic matter (DOM) and dealkaline lignin (DL). The DOM or DL interaction with the LDHs at different mixture levels was shown to be an antagonistic effect on the growth inhibition toxicity to C. pyrenoidosa mainly. The estimation of the index of Integrated Biological Responses version 2 indicated that the joint interaction of the LDHs with DOM or DL occurred in the following order of frequency synergism > antagonism > additivity. Furthermore, the physicochemical characteristics of LDHs were crucial for illuminating the mechanism by which the DOM or DL modified the LDH-induced oxidative stress response. These findings highlighted the important role of NOM in the behavior and effect of LDHs as a representative of a new class of multifunctional nanomaterials in the freshwater environment.

Ambivalent effects of dissolved organic matter on silver nanoparticles/silver ions transformation: A review

The numerous applications of silver nanoparticles (AgNPs) lead to their spread in aquatic systems and the release of silver ions (Ag⁺), which brings potential risks to environment and human health. Owing to the different toxicity, the mutual transformations between AgNPs and Ag⁺ has been a hot topic of research. Dissolved organic matter (DOM) is ubiquitous on the earth and almost participates in all the reactions in the nature. The previous studies have reported the roles of DOM played in the transformation between AgNPs and Ag⁺. However, different experiment conditions commonly caused contradictory results, leading to the difficulty to predict the fate of AgNPs in specific reactions. Here we summarized mechanisms of DOM-mediated AgNPs oxidation and Ag⁺ reduction, and analyzed the effects of environmental parameters. Moreover, the knowledge gaps, challenges, and new opportunities for research in this field are discussed. This review will promote the understanding of the fate and risk assessments of AgNPs in natural water systems.

Prediction of attachment efficiency using machine learning on a comprehensive database and its validation

Colloidal particles can attach to surfaces during transport, but the attachment depends on particle size, hydrodynamics, solid and water chemistry, and particulate matter. The attachment is quantified in filtration theory by measuring attachment or sticking efficiency (Alpha). A comprehensive Alpha database (2538 records) was built from experiments in the literature and used to develop a machine learning (ML) model to predict Alpha. The training (r-squared: 0.86) was performed using two random forests capable of handling missing data. A holdout dataset was used to validate the training (r-squared: 0.98), and the variable importance was explored for training and validation. Finally, an additional validation dataset was built from quartz crystal microbalance experiments using surface-modified polystyrene, poly (methyl methacrylate), and polyethylene. The experiments were performed in the absence or presence of humic acid. Full database regression (r-squared: 0.90) predicted Alpha for the additional validation with an r-squared of 0.23. Nevertheless, when the original database and the additional validation dataset were combined into a new database, both the training (r-squared: 0.95) and validation (r-squared: 0.70) increased. The developed ML model provides a data-driven prediction of Alpha over a big database and evaluates the significance of 22 input variables.

Insights into eco-corona formation and its role in the biological effects of nanomaterials from a molecular mechanisms perspective

Broad application of nanotechnology inevitably results in the release of nanomaterials (NMs) into the aquatic environment, and the negative effects of NMs on aquatic organisms have received much attention. Notably, in the natural aquatic environment, ubiquitous ecological macromolecules (i.e., natural organic matter, extracellular polymeric substances, proteins, and metabolites) can easily adsorb onto the surfaces of NMs and form an "eco-corona". As most NMs have such an eco-corona modification, the properties of their eco-corona significantly determine the fate and ecotoxicity of NMs in the natural aquatic ecosystem. Therefore, it is of great importance to understand the role of the eco-corona to evaluate the environmental risks NMs pose. However, studies on the mechanism of eco-corona formation and its resulting nanotoxicity on aquatic organisms, especially at molecular levels, are rare. This review systemically summarizes the mechanisms of eco-corona formation by several typical ecological macromolecules. In addition, the similarities and differences in nanotoxicity between pristine and corona-coated NMs to aquatic organisms at different trophic levels were compared. Finally, recent findings about potential mechanisms on how NM coronas act on aquatic organisms are discussed, including cellular internalization, oxidative stress, and genotoxicity. The literature shows that 1) the formation of an eco-corona on NMs and its biological effect highly depend on both the composition and conformation of macromolecules; 2) both feeding behavior and body size of aquatic organisms at different trophic levels result in different responses to corona-coated NMs; 3) genotoxicity can be used as a promising biological endpoint for evaluating the role of eco-coronas in natural waters. This review provides informative insight for a better understanding of the role of eco-corona plays in the nanotoxicity of NMs to aquatic organisms which will aid the safe use of NMs.

The interaction mechanisms of co-existing polybrominated diphenyl ethers and engineered nanoparticles in environmental waters: A critical review

This review focuses on the occurrence and interactions of engineered nanoparticles (ENPs) and brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) in water systems and the generation of highly complex compounds in the environment. The release of ENPs and BFRs (e.g. PBDEs) to aquatic environments during their usage and disposal are summarised together with their key interaction mechanisms. The major interaction mechanisms including electrostatic, van der Waals, hydrophobic, molecular bridging and steric, hydrogen and π-bonding, cation bridging and ligand exchange were identified. The presence of ENPs could influence the fate and behaviour of PBDEs through the interactions as well as induced reactions under certain conditions which increases the formation of complex compounds. The interaction leads to alteration of behaviour for PBDEs and their toxic effects to ecological receptors. The intermingled compound (ENPs-BFRs) would show different behaviour from the parental ENPs or BFRs, which are currently lack of investigation. This review provided insights on the interactions of ENPs and BFRs in artificial, environmental water systems and wastewater treatment plants (WWTPs), which are important for a comprehensive risk assessment.

The environmental fate of nanoplastics: What we know and what we need to know about aggregation

The presence of nanoplastics in the environment has been proven. There is now an urgent need to determine how nanoplastics behave in the environment and to assess the risks they may pose. Here, we examine nanoplastic homo- and heteroaggregation, with a focus on environmentally relevant nanoplastic particle models. We made a systematic analysis of experimental studies, and ranked the environmental relevance of 377 different solution chemistries, and 163 different nanoplastic particle models. Since polymer latex spheres are not environmentally relevant (due to their monodisperse size, spherical shape, and smooth surface), their aggregation behavior in natural conditions is not transferable to nanoplastics. A few recent studies suggest that nanoplastic particle models that more closely mimic incidentally produced nanoplastics follow different homoaggregation pathways than latex sphere particle models. However, heteroaggregation of environmentally relevant nanoplastic particle models has seldom been studied. Despite this knowledge gap, the current evidence suggests that nanoplastics may be more sensitive to heteroaggregation than previously expected. We therefore provide an updated hypothesis about the likely environmental fate of nanoplastics. Our review demonstrates that it is essential to use environmentally relevant nanoplastic particle models, such as those produced with top-down methods, to avoid biased interpretations of the fate and impact of nanoplastics. Finally, it will be necessary to determine how the heteroaggregation kinetics of nanoplastics impact their settling rate to truly understand nanoplastics' fate and effect in the environment.

Availability of Metribuzin-Loaded Polymeric Nanoparticles in Different Soil Systems: An Important Study on the Development of Safe Nanoherbicides

Nanoformulations have been used to improve the delivery of fertilizers, pesticides, and growth regulators, with a focus on more sustainable agriculture. Nanoherbicide research has focused on efficiency gains through targeted delivery and environmental risk reduction. However, research on the behavior and safety of the application of these formulations in cropping systems is still limited. Organic matter contained in cropping systems can change the dynamics of herbicide−soil interactions in the presence of nanoformulations. The aim of this study was to use classical protocols from regulatory studies to understand the retention and mobility dynamics of a metribuzin nanoformulation, compared to a conventional formulation. We used different soil systems and soil with added fresh organic material. The batch method was used for sorption−desorption studies and soil thin layer chromatography for mobility studies, both by radiometric techniques. Sorption parameters for both formulations showed that retention is a reversible process in all soil systems (H~1.0). In deep soil with added fresh organic material, nanoformulation was more sorbed (14.61 ± 1.41%) than commercial formulation (9.72 ± 1.81%) (p < 0.05). However, even with the presence of straw as a physical barrier, metribuzin in nano and conventional formulations was mobile in the soil, indicating that the straw can act as a barrier to reduce herbicide mobility but is not impeditive to herbicide availability in the soil. Our results suggest that environmental safety depends on organic material maintenance in the soil system. The availability can be essential for weed control, associated with nanoformulation efficiency, in relation to the conventional formulation.

Trichloroethylene remediation using zero-valent iron with kaolin clay, activated carbon and bacteria

Nanoscale particles of zero-valent iron were used to form a permeable reactive barrier whose performance in dechlorinating a solution of trichloroethylene was compared with that of a barrier formed from limestone. The iron was combined with kaolin by calcination. The test liquid contained sewage sludge, and also added NH₄Cl and KH₂PO₄. The average removal rates of trichloroethylene and phosphorus over 365 days both exceeded 94%. Chemical oxygen demand was reduced by 92% and ammonium nitrogen by 43.6%. All were significantly greater than the removals with the limestone barrier. The ceramsite barrier retained 85% of its effectiveness even after 365 days of use. Dechloromonas sp. was the main dechlorinating bacterium, but its removal ability is limited. The removal of trichloroethylene in such a barrier mainly depends on reduction by the zero-valent iron and biodegradation. The results show that the prepared ceramsite is stable and effective in removing trichloroethylene from water. It is a promising in-situ remediation material for groundwater.

Exogenous iron alters uptake and translocation of CuO nanoparticles in soil-rice system: A life cycle study

The abundant iron in farmland soil may affect the environmental fate of metal-based nanoparticles (MNPs). In this study, the effect of FeSO4 and nano-zero-valent iron (nZVI) as exogenous iron on the uptake and translocation of CuO nanoparticles (NPs) in soil-rice system was performed in a life cycle study. The results show that exogenous iron basically elevated the soil pH and electrical conductivity but lowered the redox potential. Moreover, the Cu bioavailability in soil was significantly increased by 86-269% with exogenous iron at the tillering stage, while was reduced by 15-45% with medium and high concentrations of Fe(II) at the maturation stage. Meanwhile, the addition of exogenous iron resolved the unfilling of grains caused by CuO NPs. Notably, except for highest Fe(II) treatment, both Fe(II) and nZVI reduced Cu accumulation from 31% to 84% in roots and leaves due to more iron plaque. Especially, medium Fe(II) level markedly decreased the Cu content in the brown rice. μ-XRF analysis suggests that high intensity of Cu was primarily located in the rice hull and embryo under Fe(II) treatment. The reduction of CuO NPs to Cu2O caused by Fe(II) can explain the positive effect of exogenous iron on controlling the environmental risk of MNPs.

Understanding the risks of mercury sulfide nanoparticles in the environment: Formation, presence, and environmental behaviors

Mercury (Hg) could be microbially methylated to the bioaccumulative neurotoxin methylmercury (MeHg), raising health concerns. Understanding the methylation of various Hg species is thus critical in predicting the MeHg risk. Among the known Hg species, mercury sulfide (HgS) is the largest Hg reservoir in the lithosphere and has long been considered to be highly inert. However, with advances in the analytical methods of nanoparticles, HgS nanoparticles (HgS NPs) have recently been detected in various environmental matrices or organisms. Furthermore, pioneering laboratory studies have reported the high bioavailability of HgS NPs. The formation, presence, and transformation (e.g., methylation) of HgS NPs are intricately related to several environmental factors, especially dissolved organic matter (DOM). The complexity of the behavior of HgS NPs and the heterogeneity of DOM prevent us from comprehensively understanding and predicting the risk of HgS NPs. To reveal the role of HgS NPs in Hg biogeochemical cycling, research needs should focus on the following aspects: the formation pathways, the presence, and the environmental behaviors of HgS NPs impacted by the dominant influential factor of DOM. We thus summarized the latest progress in these aspects and proposed future research priorities, e.g., developing the detection techniques of HgS NPs and probing HgS NPs in various matrices, further exploring the interactions between DOM and HgS NPs. Besides, as most of the previous studies were conducted in laboratories, our current knowledge should be further refreshed through field observations, which would help to gain better insights into predicting the Hg risks in natural environment.

Challenges in quantifying and characterizing dissolved organic carbon: Sampling, isolation, storage, and analysis

Despite the advancements in analytical techniques, there are still great challenges and difficulties in accurately and effectively quantifying and characterizing dissolved organic carbon (DOC) in environmental samples. The objectives of this review paper are (a) to understand the roles and variability of DOC along the water continuum; (b) to identify the constraints, inconsistences, limitations, and artifacts in DOC characterization; and (c) to provide recommendations and remarks to improve the analytical accuracy. For the first objective, we summarize the four ecological and engineering roles of DOC along the water continuum from source water to municipal utility, including nutrients and energy sources, controlling the fates of micropollutants, buffering capacity, and treatability and precursors of disinfection byproducts. We also discuss three major challenges in DOC analysis, including spatial and temporal variations, degradability and stability, and unknown structures and formulas. For the second objective, we review the procedures and steps in DOC analysis, including sampling in diverse environmental matrices, isolation of DOC fraction, storage and preservation techniques, and analyses on bulk chemical characteristics. We list and discuss the available options and evaluate the advantages and disadvantages of each choice. Last, we provide recommendations and remarks for each stage: sampling, isolation, storage, and analysis.

Humic acid-coated hydrated ferric oxides-polymer nanocomposites for heavy metal removal in water

Water pollution by toxic heavy metals poses a threat to the environment and human bodies. Herein, a novel hydrated ferric oxide nanoparticle (HFO) based hybrid adsorbent was fabricated for the removal of toxic Cu(II), Cd(II) and Pb(II) from water. HFOs were immobilized into a porous resin D-201, and then this nanocomposite HFO-D201 was coated with humic acid (HA) to enhance the binding sites of target metals. Both HFOs and HA contribute to the sequestration of heavy metals. The as-synthesized hybrid adsorbent HA-HFO-D201 exhibited excellent performance on the removal of Cu(II), Cd(II), and Pb(II) in a pH range of 3-9, while no Fe leaching was observed. The presence of natural organic matter (20 mg C/L) has limited influences on the adsorption, and more than 85% of the target metals can be removed after treatment. HA-HFO-D201 showed preferable adsorption toward Cu(II) and Pb(II) (1 mg/L) from the background Ca²⁺ solution at much higher concentrations (100 mg/L), while the retention of Cd(II) (1 mg/L) decreased to some extent. Fixed-bed column experiments exhibited that the treatment capacities of HA-HFO-D201 are 90 bed volumes (BV) for Cd(II), 410 BV for Pb(II) and > 800 BV for Cu(II) of simulated contaminated water to meet the WHO drinking water standard. Meanwhile, depleted HA-HFO-D201 can be readily regenerated by a chelating agent Na₂EDTA for repeated use. The hybrid adsorbent HA-HFO-D201 has excellent potential to remove heavy metals in water treatment systems.

Tetracycline Adsorption on Magnetic Sludge Biochar: Effects of pH, Humic Acid (HA), and Fulvic Acid (FA)

Natural organic matters (NOMs) are ubiquitous in the environment, but few systematic studies have examined the influence of NOMs on the sorption ability of magnetic sludge biochar. In this study, magnetic sludge biochar was synthesized, characterized, and used as a sorbent to remove tetracycline (TC) from aqueous solutions. The effects of pH, humic acid (HA), and fulvic acid (FA) on TC adsorption by magnetic sludge biochar were studied using batch experiments. Adding HA and FA can alter the adsorption behavior of TC, except for its pH dependency. The results of this study show that relatively low concentrations of dissolved HA (≤8 ppm) and FA (≤5 ppm) promote the adsorption capacity of TC, but higher concentrations compete against TC for sorption sites on the surface of magnetic sludge biochar. The results of this study promote a better understanding of the application of magnetic sludge biochar in real antibiotic wastewater.

Evaluating the Occurrence of Polystyrene Nanoparticles in Environmental Waters by Agglomeration with Alkylated Ferroferric Oxide Followed by Micropore Membrane Filtration Collection and Py-GC/MS Analysis

Although nanoplastics (NPs) are recognized as emerging anthropogenic particulate pollutants, the occurrence of NPs in the environment is rarely reported, partly due to the lack of sensitive methods for the concentration and detection of NPs. Herein, we present an efficient method for enriching NPs of different compositions and various sizes. Alkylated ferroferric oxide (Fe₃O₄) particles were prepared as adsorbents for highly efficient capture of NPs in environmental waters, and the formed large Fe₃O₄-NP agglomerates were separated by membrane filtration. Detection limits of 0.02-0.03 μg/L were obtained for polystyrene (PS) and poly(methyl methacrylate) (PMMA) NPs by detection with pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). When analyzing real water samples from different sources, it is remarkable that PS NPs were detected in 11 out of 15 samples with concentrations ranging from <0.07 to 0.73 μg/L, while PMMA were not detected. The wide detection of PS NPs in our study confirms the previous speculation that NPs may be ubiquitous in the environmental waters. The accurate quantification of PS NPs in environmental waters make it possible to monitor the pollution status of NPs in aquatic systems and evaluate their potential risks.

An efficient removal mechanism for different hydrophilic antibiotics from aquatic environments by Cu-Al-Fe-Cr quasicrystals

The work studied the adsorption properties and mechanism of Cu-Al-Fe-Cr quasicrystals (QCs) for the adsorption of ibuprofen (IBU), tedizolid phosphate (TZD), and sulbactam sodium (SAM) for the first time. The experimental results showed that quasicrystals were good adsorbents with great potential. The structure, surface morphology, and elemental composition of QCs were investigated by XPS, XRD, SEM, EDX, particle size, DSC-TG, and FTIR. The adsorption pH, kinetics, thermodynamics, and isotherms of IBU, TZD, and SAM in QCs were systematically studied. QCs had good adsorption performance for antibiotics, and the adsorption capacities of IBU, TZD, and SAM were 46.964, 49.206, and 35.292 mg g-1 at the concentration of 25 mg L-1, respectively. The surface charge and hydrophobicity of QCs were affected by changing pH, thereby affecting the adsorption performance of QCs. The main driving forces of adsorption included electrostatic force and hydrophobicity.

Systematic Research on the Transport of Ball-Milled Biochar in Saturated Porous Media: Effect of Humic Acid, Ionic Strength, and Cation Types

Ball-milled biochar (BMBC) is a typical engineering material that has promising application prospects in remediating contaminated soil and water. It is fundamental to rate the transport behaviors of BMBC in the underground environment before extensive use. In this study, the effects of the ubiquitous cations (Na+, Mg2+, and Al3+) and model organic matter (humic acid) on the transport of BMBC were investigated using laboratory column experiments. The results demonstrated the facilitated effect of HA on the transport of BMBC due to the negatively charged surface and steric effect under neutral conditions. HA and ionic strength manifested an antagonistic effect on the transport of BMBC, where the presence of one could weaken the effect from the other. We also found the charge reversal of the BMBC surface in the presence of Mg2+, thus enhancing the deposition of BMBC onto the medium surface. On the other hand, the charge reversal from Al3+-coupled acid conditions led to the restabilization and transport of BMBC in porous media. Therefore, the rational usage of BMBC is indispensable and more attention should be paid to the composition and change in underground water that might facilitate the transport of BMBC and thus lead to negative environmental implications.

Sorption of Fulvic Acids onto Titanium Dioxide Nanoparticles Extracted from Commercial Sunscreens: ToF-SIMS and High-Dimensional Data Analysis

Titanium dioxide nanoparticles (n-TiO2) are common ingredients of sunscreens and are often released into surface waters during usage. Once released, the surface chemistry of n-TiO2 changes by interacting with dissolved organic matter (DOM). In previous studies, these interactions were investigated using model n-TiO2 and; therefore, do not account for the complex composition of the coating of n-TiO2 aged in sunscreens. Taking advantage of a mild extraction method to provide more realistic nanoparticles, we investigated the potentials of time of flight-secondary ion mass spectrometry (ToF-SIMS) combined with high-dimensional data analysis to characterize the sorption of fulvic acids, as a model for DOM, on titanium dioxide nanoparticles extracted from ten different commercial sunscreens (n-TiO2 ⸦ sunscreen). Clustering analysis confirmed the ability of ToF-SIMS to detect the sorption of fulvic acids. Moreover, a unique sorption pattern was recognized for each n-TiO2 ⸦ sunscreen, which implied different fractionation of fulvic acids based on the initial specifications of nanoparticles, e.g., size, coating, etc. Furthermore, random forest was used to extract the most important fragments for predicting the presence of fulvic acids on the surface of n-TiO2 ⸦ sunscreen. Finally, we evaluate the potential of ToF-SIMS for characterizing the sorption layer.

A critical review on the role of abiotic factors on the transformation, environmental identity and toxicity of engineered nanomaterials in aquatic environment

Engineered nanomaterials (ENMs) are at the forefront of many technological breakthroughs in science and engineering. The extensive use of ENMs in several consumer products has resulted in their release to the aquatic environment. ENMs entering the aquatic ecosystem undergo a dynamic transformation as they interact with organic and inorganic constituents present in aquatic environment, specifically abiotic factors such as NOM and clay minerals, and attain an environmental identity. Thus, a greater understanding of ENM-abiotic factors interactions is required for an improved risk assessment and sustainable management of ENMs contamination in the aquatic environment. This review integrates fundamental aspects of ENMs transformation in aquatic environment as impacted by abiotic factors, and delineates the recent advances in bioavailability and ecotoxicity of ENMs in relation to risk assessment for ENMs-contaminated aquatic ecosystem. It specifically discusses the mechanism of transformation of different ENMs (metals, metal oxides and carbon based nanomaterials) following their interaction with the two most common abiotic factors NOM and clay minerals present within the aquatic ecosystem. The review critically discusses the impact of these mechanisms on the altered ecotoxicity of ENMs including the impact of such transformation at the genomic level. Finally, it identifies the gaps in our current understanding of the role of abiotic factors on the transformation of ENMs and paves the way for the future research areas.

How the Physicochemical Properties of Manufactured Nanomaterials Affect Their Performance in Dispersion and Their Applications in Biomedicine: A Review

The growth in novel synthesis methods and in the range of possible applications has led to the development of a large variety of manufactured nanomaterials (MNMs), which can, in principle, come into close contact with humans and be dispersed in the environment. The nanomaterials interact with the surrounding environment, this being either the proteins and/or cells in a biological medium or the matrix constituent in a dispersion or composite, and an interface is formed whose properties depend on the physicochemical interactions and on colloidal forces. The development of predictive relationships between the characteristics of individual MNMs and their potential practical use critically depends on how the key parameters of MNMs, such as the size, shape, surface chemistry, surface charge, surface coating, etc., affect the behavior in a test medium. This relationship between the biophysicochemical properties of the MNMs and their practical use is defined as their functionality; understanding this relationship is very important for the safe use of these nanomaterials. In this mini review, we attempt to identify the key parameters of nanomaterials and establish a relationship between these and the main MNM functionalities, which would play an important role in the safe design of MNMs; thus, reducing the possible health and environmental risks early on in the innovation process, when the functionality of a nanomaterial and its toxicity/safety will be taken into account in an integrated way. This review aims to contribute to a decision tree strategy for the optimum design of safe nanomaterials, by going beyond the compromise between functionality and safety.

Towards Standardization for Determining Dissolution Kinetics of Nanomaterials in Natural Aquatic Environments: Continuous Flow Dissolution of Ag Nanoparticles

The dissolution of metal-based engineered nanomaterials (ENMs) in aquatic environments is an important mechanism governing the release of toxic dissolved metals. For the registration of ENMs at regulatory bodies such as REACH, their dissolution behavior must therefore be assessed using standardized experimental approaches. To date, there are no standardized procedures for dissolution testing of ENMs in environmentally relevant aquatic media, and the Organisation for Economic Co-operation and Development (OECD) strongly encourages their development into test guidelines. According to a survey of surface water hydrochemistry, we propose to use media with low concentrations of Ca²⁺ and Mg²⁺ for a better simulation of the ionic background of surface waters, at pH values representing acidic (5 < pH < 6) and near-neutral/alkaline (7 < pH < 8) waters. We evaluated a continuous flow setup adapted to expose small amounts of ENMs to aqueous media, to mimic ENMs in surface waters. For this purpose, silver nanoparticles (Ag NPs) were used as model for soluble metal-bearing ENMs. Ag NPs were deposited onto a 10 kg.mol⁻¹ membrane through the injection of 500 µL of a 5 mg.L⁻¹ or 20 mg.L⁻¹ Ag NP dispersion, in order to expose only a few micrograms of Ag NPs to the aqueous media. The dissolution rate of Ag NPs in 10 mM NaNO₃ was more than two times higher for ~2 µg compared with ~8 µg of Ag NPs deposited onto the membrane, emphasizing the importance of evaluating the dissolution of ENMs at low concentrations in order to keep a realistic scenario. Dissolution rates of Ag NPs in artificial waters (2 mM Ca(NO₃)₂, 0.5 mM MgSO₄, 0–5 mM NaHCO₃) were also determined, proving the feasibility of the test using environmentally relevant media. In view of the current lack of harmonized methods, this work encourages the standardization of continuous flow dissolution methods toward OECD guidelines focused on natural aquatic environments, for systematic comparisons of nanomaterials and adapted risk assessments.

The impact of silver nanoparticles on microbial communities and antibiotic resistance determinants in the environment

Nanosilver (NAg) is currently one of the major alternative antimicrobials to control microorganisms. With its broad-spectrum efficacy and lucrative commercial values, NAg has been used in medical devices and increasingly, in consumer products and appliances. This widespread use has inevitably led to the release and accumulation of the nanoparticle in water and sediment, in soil and even, wastewater treatment plants (WWTPs). This Article describes the physical and chemical transformations of NAg as well as the impact of the nanoparticle on microbial communities in different environmental settings; how the nanoparticle shifts not only the diversity and abundance of microbes, including those that are important in nitrogen cycles and decomposition of organic matters, but also their associated genes and in turn, the key metabolic processes. Current findings on the microbiological activity of the leached soluble silver, solid silver particulates and their respective transformed products, which underpin the mechanism of the nanoparticle toxicity in environmental microbes, is critically discussed. The Article also addresses the emerging evidence of silver-driven co-selection of antibiotic resistance determinants. The mechanism has been linked to the increasing pools of many antibiotic resistance genes already detected in samples from different environmental settings, which could ultimately find their ways to animals and human. The realized ecological impact of NAg calls for more judicial use of the nanoparticle. The generated knowledge can inform strategies for a better 'risks versus benefits' assessment of NAg applications, including the disposal stage.

Novel multimethod approach for the determination of the colloidal stability of nanomaterials in complex environmental mixtures using a global stability index: TiO2 as case study

A systematic study on the colloidal behavior of uncoated and polyvinylpyrrolidone (PVP) coated TiO₂ engineered nanomaterials (ENMs) in simulated aqueous media is herein reported, in which conditions representative for natural waters (pH, presence of divalent electrolytes (i.e. Ca²⁺/Mg²⁺ and SO₄^2-), of natural organic matter (NOM) and of suspended particulate matter (SPM)) were systematically varied. The colloidal stability of the different dispersions was investigated by means of Dynamic and Electrophoretic Light Scattering (DLS and ELS) and Centrifugal Separation Analysis (CSA), and a global stability index based on these three techniques was developed. The index allows to quantitatively classify the nano-based dispersions according to their colloidal stability affected by the different parameters studied. This multimethod approach clearly identifies inorganic SPM followed by divalent electrolytes as the main natural components destabilizing TiO₂ ENMs upon entering in simulated natural waters, while it highlights a moderate stabilization induced by NOM, depending mainly on pH. Moreover, the PVP coating was found to attenuate the influence of these parameters on the colloidal stability. The obtained results show how the global stability index developed is influenced by the complexity of the system, suggesting the importance of combining the information gathered from all the techniques employed to better elucidate the fate and behavior of ENMs in natural surface waters.

Freeze-thaw cycles promote vertical migration of metal oxide nanoparticles in soils

Understanding the migration of engineered nanoparticles (ENPs) in soil is of great significance for evaluating the potential risks of ENPs to ecosystem. So far, their migration under freeze-thaw cycles (FTCs) has not been investigated. This study explored the impacts of FTCs on the migration of three commonly used ENPs, copper oxide (CuO-NPs), cerium oxide (CeO₂-NPs), and zinc oxide (ZnO-NPs), in three types of soil. After 32 FTC cycles, the highest migration rate of ENPs was found in black soil due to its higher clay particle content. CeO₂-NPs with low surface charge exhibited the highest mobility among three ENPs, which migrated to 9-11 cm layer with the concentration of 42.1 mg/kg in the black soil column. ZnO-NPs were less influenced by FTCs as they were adsorbed onto sand grains due to electrostatic interaction, which migrated to 3-5 cm layer with the concentration of 25.2 mg/kg in the black soil. Higher moisture contents (50% and 100%) resulted in increased migration depth of the ENPs in all soils. Lower freezing temperature (-25 °C) caused fragmentation of large soil particles and produced more clay colloids. FTCs promoted the movement of moisture, which penetrated the soil and thus facilitated the movement of ENPs by increasing the contents and movement of clay colloids. This work reveals the migration behavior of ENPs in soils in freeze-thaw period and provides insights into the fate and environmental risk of nanomaterial at middle and high latitudes.

Coating with polysaccharides influences the surface charge of cerium oxide nanoparticles and their effects to Mytilus galloprovincialis

This study focused on the effects of surface coating, acquired through the interaction with natural biomolecules, on the behavior and ecotoxicity of nanoparticles (NPs). To this aim, the effects of Cerium Oxide Nanoparticles (CeO₂NPs) naked and coated with chitosan and alginate on the marine mussel Mytilus galloprovincialis were compared. Mussels were exposed for 7 days to 100 μg L^-1 of CeO₂NPs and for 28 days to 1 μg L^-1 of CeO₂NPs. In both experiments CeO₂NPs were used naked and coated with the two polysaccharides. The lowest tested concentration allowed to understand the environmental relevance of this biological process. A set of biomarkers related to oxidative stress/damage and energy metabolism was applied to assess the ecotoxicity of CeO₂NPs. The aggregation and stability in water of CeO₂NPs were measured through dynamic light scattering analysis and the levels of Ce in the exposure media and in mussels soft tissues were determined by inductively coupled plasma-mass spectrometry. Results showed a different hydrodynamic behavior and stability of CeO₂NPs in saltwater related to the different coatings. Despite this, no differences in the bioaccumulation of CeO₂NPs were observed among the experimental groups. Different coatings affected also CeO₂NPs toxicological outcomes in both 7- and 28-days exposures. Coating with chitosan enhanced antioxidant enzyme activities while coating with alginate triggered oxidative damage. Although the oxidant pathways did not differ that much among the exposures, biomarkers of energetic supplies suggested a different strategy of defense in response to CeO₂NP exposure at a lower concentration and for a longer period of time. The obtained results are in line with findings of a previous study on freshwater mussels, suggesting that the coating with biomolecules, which impart negative charge to the NPs, might enhance their biological effects. This study highlighted that interactions of NPs with natural biomolecules largely present in the aquatic environment could affect NPs toxicity altering the interaction towards organisms.

Characterization and biogeochemical implications of dissolved organic matter in aquatic environments

Dissolved organic matter (DOM) is viewed as one of the most chemically active organic substances on earth. It plays vital roles in the fate, bioavailability and toxicity of aquatic exogenous chemical species (e.g., heavy metals, organic pollutants, and nanomaterials). The characteristics of DOM such low concentrations, salt interference and complexity in aquatic environments and limitations of pretreatment for sample preparation and application of characterization techniques severely limit understanding of its nature and environmental roles. This review provides a characterization continuum of aquatic DOM, and demonstrate its biogeochemical implications, enabling in-depth insight into its nature and environmental roles. A synthesis of the effective DOM pretreatment strategies, comprising extraction and fractionation methods, and characterization techniques is presented. Additionally, the biogeochemical dynamics of aquatic DOM and its environmental implications are discussed. The findings indicate the collection of representative DOM samples from water as the first and critical step for characterizing its properties, dynamics, and environmental implications. However, various pretreatment procedures may alter DOM composition and structure, producing highly variable recoveries and even influencing its subsequent characterization. Therefore, complimentary use of various characterization techniques is highly recommended to obtain as much information on DOM as possible, as each characterization technique exhibits various advantages and limitations. Moreover, DOM could markedly change the physical and chemical properties of exogenous chemical species, influencing their transformation and mobility, and finally altering their potential bioavailability and toxicity. Several research gaps to be addressed include the impact of pretreatment on the composition and structure of aquatic DOM, molecular-level structural elucidation for DOM, and assessment of the effects of DOM dynamics on the fate, bioavailability and toxicity of exogenous chemical species.