Adsorption of 17β-estradiol from aqueous solution by raw and direct/pre/post-KOH treated lotus seedpod biochar

Efficient degradation of sulfadiazine by UV-triggered electron transfer on oxalic acid-functionalized corn straw biochar for activating peroxyacetic acid: Performance, mechanism, and theoretical calculation

A novel UV/oxalic acid functionalized corn straw biochar (OCBC)/peroxyacetic acid (PAA) system was built to degrade sulfadiazine from waters. 94.7 % of SDZ was removed within 30 min by UV/OCBC/PAA. The abundant surface functional groups and persistent free radicals (PFRs) on OCBC were responsible for these performances. Cyclic voltammetry (CV) and other characterization analysis revealed, under UV irradiation, the addition of OCBC served as electron donor, which might promote the reaction of electrons with PAA. The quenching and electron paramagnetic resonance (EPR) tests indicated that R-O•, 1O2 and •OH were generated. Theoretical calculations indicated sulfonamide bridge was vulnerable under the attacks of reactive species. In addition, high removal effect achieved by 5 reuse cycles and different real waters also suggested the sustainability of UV/OCBC/PAA. Overall, this study provided a feasible approach to remove SDZ with high mineralization efficiency, in addition to a potential strategy for resource utilization of corn straw.

Phthalate acid esters: A review of aquatic environmental occurrence and their interactions with plants

The increasing use of phthalate acid esters (PAEs) in various applications has inevitably led to their widespread presence in the aquatic environment. This presents a considerable threat to plants. However, the interactions between PAEs and plants in the aquatic environment have not yet been comprehensively reviewed. In this review, the properties, occurrence, uptake, transformation, and toxic effects of PAEs on plants in the aquatic environment are summarized. PAEs have been prevalently detected in the aquatic environment, including surface water, groundwater, seawater, and sediment, with concentrations ranging from the ng/L or ng/kg to the mg/L or mg/kg range. PAEs in the aquatic environment can be uptake, translocated, and metabolized by plants. Exposure to PAEs induces multiple adverse effects in aquatic plants, including growth perturbation, structural damage, disruption of photosynthesis, oxidative damage, and potential genotoxicity. High-throughput omics techniques further reveal the underlying toxicity molecular mechanisms of how PAEs disrupt plants on the transcription, protein, and metabolism levels. Finally, this review proposes that future studies should evaluate the interactions between plants and PAEs with a focus on long-term exposure to environmental PAE concentrations, the effects of PAE alternatives, and human health risks via the intake of plant-based foods.

Structure and composition of dissolved organic matters in sludge by ultrasonic treatment

The leaching of dissolved organic matter (DOM) from the sludge into the liquid phase is induced by ultrasound. However, there is limited investigation into the structure and molecular composition of sludge DOM in this process. The molecular structure and composition of sludge DOM in ultrasonic treatment were comprehensively elucidated in this study. The sludge dissolved organic carbon (DOC) and three-dimensional fluorescence spectroscopy (3D-EEM) image had most significant change at 15-min ultrasonic time and 1.2 W/mL ultrasonic density, respectively. Gas Chromatography-Mass Spectrometry (GC-MS) analysis indicated that ultrasonic treatment of sludge reduced the macromolecules to small molecules in DOM. Then, electrospray ionization Fourier-transform ion cyclotron resonance mass spectrometry (ESI FT-ICR-MS) analysis revealed that lignin, tannins, and carbohydrates were the main components of sludge DOMs after ultrasound treatment. analysis revealed that lignin, tannins, and carbohydrates were the main components of sludge DOMs after ultrasound treatment. Furthermore, through the Van Krevelen analysis, the major components were CHO (48.50%) and CHOS (23.20%) in the DOM of ultrasonicated sludge. This research provides the basis for the practical application of ultrasonic treatment of sludge and provides basic information for DOM components.

A critical and comprehensive review of the current status of 17β-estradiol hormone remediation through adsorption technology

Even at low concentrations, steroid hormones pose a significant threat to ecosystem health and are classified as micropollutants. Among these, 17β-estradiol (molecular formula: C18H24O2; pKa = 10.46; Log Kow = 4.01; solubility in water = 3.90 mg L-1 at 27 °C; molecular weight: 272.4 g mol-1) is extensively studied as an endocrine disruptor due to its release through natural pathways and widespread use in conventional medicine. 17β-estradiol (E2) is emitted by various sources, such as animal and human excretions, hospital and veterinary clinic effluents, and treatment plants. In aquatic biota, it can cause issues ranging from the feminization of males to inhibiting plant growth. This review aims to identify technologies for remediating E2 in water, revealing that materials like graphene oxides, nanocomposites, and carbonaceous materials are commonly used for adsorption. The pH of the medium, especially in acidic to neutral conditions, affects efficiency, and ambient temperature (298 K) supports the process. The Langmuir and Freundlich models aptly describe isothermal studies, with interactions being of a low-energy, physical nature. Adsorption faces limitations when other ions coexist in the solution. Hybrid treatments exhibit high removal efficiency. To mitigate global E2 pollution, establishing national and international standards with detailed guidelines for advanced treatment systems is crucial. Despite significant advancements in optimizing technologies by the scientific community, there remains a considerable gap in their societal application, primarily due to economic and sustainable factors. Therefore, further studies are necessary, including conducting batch experiments with these adsorbents for large-scale treatment along with economic analyses of the production process.

Emerging applications of biochar: A review on techno-environmental-economic aspects

Biomass fast pyrolysis produces bio-oil and biochar achieving circular economy. This review explored the emerging applications of biochar. Biochar possesses the unique properties for removing emerging contaminants and for mine remediation, owing to its negative charge surface, high specific surface area, large pore size distribution and surface functional groups. Additionally, biochar could adsorb impurities such as CO2, moisture, and H2S to upgrade the biogas. Customizing pyrolysis treatments, optimizing the feedstock and pyrolysis operating conditions enhance biochar production and improve its surface properties for the emerging applications. Life cycle assessment and techno-economic assessment indicated the benefits of replacing conventional activated carbon with biochar.

Carbon-based nanomaterials mediated adsorption and photodegradation of typical organic contaminants in aqueous fulvic acid solution

In this work, the formation of carbon-based nanomaterials-fulvic acid (CNMs-FA) composites and their capacities for the adsorption and photodegradation of typical organic contaminants in aqueous solutions were investigated. The results suggested that the formation of CNMs-FA composites was dominated by adsorbing FA on CNMs via the physisorption process, which fit the pseudo-first-order kinetic model and the Langmuir isotherm model. The formed CNMs-FA composites were characterized by using the Brunauer-Emmett-Teller, scanning electron microscopy, and infrared spectroscopy techniques and further applied for examining their effects on the adsorption and photodegradation of selected organic contaminants in aqueous solutions. The adsorption of organic contaminants on CNMs-FA composites is mainly involved in hydrogen bonding and electrostatic interactions between organic contaminants and FA species adhering to CNMs. In addition, the CNMs-FA composites are able to promote the photosensitive degradation of organic contaminants due to the photogenerated reactive species including ROS and CNMs-3FA* under sunlight irradiation. This study provided a deeper and more comprehensive understanding of the environmental behavior of CNMs in real natural surface water and clarified the underlying mechanisms.

Viable remediation techniques to cleansing wastewaters comprising endocrine-disrupting compounds

Endocrine-disrupting chemicals (EDCs) have recently gained prominence as emerging pollutants due to their significant negative impacts on diverse living forms in ecosystems, including humans, by altering their endocrine systems. EDCs are a prominent category of emerging contaminants in various aquatic settings. Given the growing population and limited access to freshwater resources, their expulsion from aquatic systems is also a severe issue. EDC removal from wastewater depends on the physicochemical properties of the specific EDCs found in each wastewater type and various aquatic environments. Due to these components' chemical, physical, and physicochemical diversity, various approaches based on physical, biological, electrochemical, and chemical procedures have been developed to eliminate them. The objective of this review is to provide the comprehensive overview by selecting recent approaches that showed significant impact on the best available methods for removing EDCs from various aquatic matrices. It is suggested that adsorption by carbon-based materials or bioresources is effective at higher EDC concentrations. Electrochemical mechanization works, but it requires expensive electrodes, continual energy, and chemicals. Due to the lack of chemicals and hazardous byproducts, adsorption and biodegradation are considered environmentally friendly. When combined with synthetic biology and an AI system, biodegradation can efficiently remove EDCs and replace conventional water treatment technologies in the near future. Hybrid in-house methods may reduce EDCs best, depending on the EDC and resources.

Surface Structure Analysis and Formaldehyde Removal Mechanism of Lotus Shell Biochar: An Experimental and Theoretical Perspective

The adsorption of gaseous HCHO by raw lotus shell biochar carbonized at 500, 700, and 900 °C from the perspective of its internal crystal structure and surface functional groups was investigated by an integrated approach of experiments and density functional theory calculations. The results showed that lotus shell biochar carbonized at 700 °C had the best adsorption effect at a HCHO concentration of 10.50 ± 0.30 mg/m³, with an adsorption removal rate of 87.64%. The HCHO removal efficiency by lotus shell biochar carbonized at 500 and 900 °C was determined to be 80.96 and 83.07%, respectively. The HCHO adsorption on lotus shell biochar carbonized at 700 °C conformed to pseudo-second-order kinetics and was predominantly controlled by chemical adsorption. The Langmuir isotherm was the underlying mechanism for the monomolecular layer adsorption with a maximum adsorption capacity of 0.329 mg/g. The density functional theory calculations revealed that the adsorption of HCHO on the surface of CaCO₃ and KCl in lotus shell biochar carbonized at 700 °C was a chemical adsorption process, with adsorption energies ranging from -64.375 to -87.554 kJ/mol. The strong interaction between HCHO and the surface was attributed to the electron transfer from HCHO to the surface, facilitated by metal atoms (Ca or K) and the oxygen atoms of HCHO. The carboxyl group on the surface of lotus shell biochar carbonized at 700 °C was identified as the key functional group responsible for HCHO adsorption. This study advanced our understanding of the environmental functions of inorganic crystals and surface functional groups in raw biochar and will enable the further development of biochar materials in environmental applications.

Sequestration of steroidal estrogen in aqueous samples using an adsorption mechanism: a systemic scientometric review

Steroidal estrogens (SEs) remain one of the notable endocrine disrupting chemicals (EDCs) that pose a significant threat to the aquatic environment in this era owing to their interference with the normal metabolic functions of the human body systems. They are currently identified as emerging contaminants of water sources. The sources of SEs are either natural or synthetic active ingredients in oral contraceptive and hormonal replacement therapy drugs and enter the environment primarily from excretes in the form of active free conjugate radicals, resulting in numerous effects on organisms in aquatic habitats and humans. The removal of SEs from water sources is of great importance because of their potential adverse effects on aquatic ecosystems and human health. Adsorption techniques have gained considerable attention as effective methods for the removal of these contaminants. A systemic review and bibliometric analysis of the application of adsorption for sequestration were carried out. Metadata for publications on SE removal utilizing adsorbents were obtained from the Web of Science (WoS) from January 1, 1990, to November 5, 2022 (107 documents) and Scopus databases from January 1, 1949, to November 5, 2022 (77 documents). In total, 137 documents (134 research and 4 review articles) were used to systematically map bibliometric indicators, such as the number of articles, most prolific countries, most productive scholars, and most cited articles, confirming this to be a growing research area. The use of different adsorbents, include activated carbon graphene-based materials, single and multi-walled carbon nanotubes, biochar, zeolite, and nanocomposites. The adsorption mechanism and factors affecting the removal efficiency, such as pH, temperature, initial concentration, contact time and adsorbent properties, were investigated in this review. This review discusses the advantages and limitations of different adsorbents, including their adsorption capacities, regenerative potential, and cost-effectiveness. Recent advances and innovations in adsorption technology, such as functionalized materials and hybrid systems, have also been highlighted. Overall, the bibliographic analysis provides a comprehensive overview of the adsorption technique for the removal of SEs from other sources, serving as a valuable resource for researchers and policymakers involved in the development of efficient and sustainable strategies to mitigate the effects of these emerging contaminants.

Magnetic Activated Carbon from ZnCl2 and FeCl3 Coactivation of Lotus Seedpod: One-Pot Preparation, Characterization, and Catalytic Activity towards Robust Degradation of Acid Orange 10

Lotus seedpods (LSPs) are an abundant and underutilized agricultural residue discarded from lotus seed production. In this study, ZnCl₂ and FeCl₃ coactivation of LSP for one-pot preparation of magnetic activated carbon (MAC) was explored for the first time. X-ray diffraction (XRD) results showed that Fe₃O₄, Fe⁰, and ZnO crystals were formed in the LSP-derived carbon matrix. Notably, transmission electron microscopy (TEM) images showed that the shapes of these components consisted of not only nanoparticles but also nanowires. Fe and Zn contents in MAC determined by atomic absorption spectroscopy (AAS) were 6.89 and 3.94 wt%, respectively. Moreover, S_BET and V_total of MAC prepared by coactivation with ZnCl₂ and FeCl₃ were 1080 m²/g and 0.51 cm³/g, which were much higher than those prepared by single activation with FeCl₃ (274 m²/g and 0.14 cm³/g) or ZnCl₂ (369 m²/g and 0.21 cm³/g). MAC was subsequently applied as an oxidation catalyst for Fenton-like degradation of acid orange 10 (AO10). As a result, 0.20 g/L MAC could partially remove AO10 (100 ppm) with an adsorption capacity of 78.4 mg/g at pH 3.0. When 350 ppm H₂O₂ was further added, AO10 was decolorized rapidly, nearly complete within 30 min, and 66% of the COD was removed in 120 min. The potent catalytic performance of MAC might come from the synergistic effect of Fe⁰ and Fe₃O₄ nanocrystals in the porous carbon support. MAC also demonstrated effective stability and reusability after five consecutive cycles, when total AO10 removal at 20 min of H₂O₂ addition slightly decreased from 93.9 ± 0.9% to 86.3 ± 0.8% and minimal iron leaching of 1.14 to 1.19 mg/L was detected. Interestingly, the MAC catalyst with a saturation magnetization of 3.6 emu/g was easily separated from the treated mixture for the next cycle. Overall, these findings demonstrate that magnetic activated carbon prepared from ZnCl₂ and FeCl₃ coactivation of lotus seedpod waste can be a low-cost catalyst for rapid degradation of acid orange 10.

Efficient removal of endocrine disrupting compounds 17 α-ethynyl estradiol and 17 β-estradiol by Enterobacter sp. strain BHUBP7 and elucidation of the degradation pathway by HRAMS analysis

Owing to the increased population and their overuse, estrogens are being detected in the environment at alarming levels. They act as endocrine disrupting compounds (EDC's) posing adverse effects on animals and humans. In this study, a strain belonging to Enterobacter sp. strain BHUBP7 was recovered from a Sewage Treatment Plant (STP) situated in Varanasi city, U.P., India, and was capable of metabolizing both 17 α-Ethynylestradiol (EE2) and 17 β-Estradiol (E2) separately as a sole carbon source. The strain BHUBP7 exhibited high rates of E2 degradation as compared to EE2 degradation. The degradation of E2 (10 mg/L) was 94.3% after four days of incubation, whereas the degradation of EE2 (10 mg/L) under similar conditions was 98% after seven days of incubation. The kinetics of EE2 and E2 degradation fitted well with the first-order reaction rate. FTIR analysis revealed the involvement of functional groups like C = O, C-C, C-OH during the degradation process. The metabolites generated during degradation of EE2 and E2 were identified using HRAMS and a plausible pathway was elucidated. It was observed that metabolism of both E2 and EE2 proceeded with the formation of estrone, which was then hydroxylated to 4-hydroxy estrone, followed by ring opening at the C4-C5 position, and was further metabolized by the 4,5 seco pathway leading to the formation of 3-(7a-methyl-1,5-dioxooctahydro-1H-inden-4-yl) propanoic acid (HIP). It is the first report on the complete pathway of EE2 and E2 degradation in Enterobacter sp. strain BHUBP7. Moreover, the formation of Reactive Oxygen Species (ROS) during the degradation of EE2 and E2 was observed. It was concluded that both hormones elicited the generation of oxidative stress in the bacterium during the degradation process.

Simultaneous adsorption of Cd(II) and degradation of OTC by activated biochar with ferrate: Efficiency and mechanism

Biochar-supported zero-valent iron nanocomposites have received much attention due to their application potential in environmental pollution remediation. However, in many occasions, zero-valent iron loading improves the electron transfer efficiency and catalytic oxidation capacity of biochar while blocking the original pore structure of biochar, limiting its application potential. In this study, a zero-valent iron composites with large SSA (865.86 m²/g) was prepared in one step using pre-pyrolysis of biochar powder and K₂FeO₄ grinding for co-pyrolysis. The processes of ZVI generation and SSA expansion during the pyrolysis were investigated. The factors affecting the removal process of Cd and OTC in water by the composites were investigated. The mechanisms of Cd fixation and OTC degradation by the composites were explored by experiments, characterization, and DFT calculations. The OTC degradation pathway was proposed by theoretical predication and LC-MS spectrometry. The results indicate that ion exchange, complexation with oxygen-containing functional groups, electrostatic attraction, and interaction with π-electrons are the main mechanisms of Cd immobilization. The degradation pathways of OTC mainly include dehydroxylation, deamination and dealkylation.

Characterizing molecular transformation of dissolved organic matter during high-solid anaerobic digestion of dewatered sludge using ESI FT-ICR MS

In this study, the effects of anaerobic digestion (AD) on molecular characteristics of dissolved organic matter (DOM) in the dewatered sludge has been described by advanced electrospray ionization combined with Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS) technology. With the progress of AD, molecular amounts in DOM samples increased with the lowering in the carbon atom number of average molecular formula and average double bond equivalent (DBE). CHON and CHONS groups are the two main organic substances in sludge with their relative DOM proportions of 29.64% and 32.56%, respectively. The resistants (i.e., refractory organic matter) mainly consist of the proteins regions of CHO groups as well as the proteins/lignin regions of CHON groups. The contrasting temporal trends in protein contents (e.g., decrease (CHO and CHON) vs. increase (CHONS)) may imply differences in their degradation characteristics. Likewise, the multi-N (N₃, N₄) and S₂ organic groups in the sludge are converted to N₂ and S₁ molecules, while the relative abundance of O atoms (in Ox molecules) tends to increase. In addition, the resistants in sludge DOM contain high oxidizing C and low unsaturation. The overall results of this research are expected to provide the theoretical basis for further optimization of the sludge AD process.

Ecological and environmental risks of heavy metals in sediments in Dingzi Bay, South Yellow Sea

As a special geographical location between rivers and oceans, coastal estuaries always face severe heavy metal contaminations, especially in semi-closed bay. In this study, the spatial distribution, chemical fraction, ecological risks, and potential sources of heavy metals (Pb, Cr, Cu, As, Cd, Zn, and Ni) in surface sediments and sediment cores were investigated in Dingzi Bay, Shandong Peninsula. The I_geo values and modified potential ecological risk index (MRI) indicated that Cd and As presented high environmental risks in the surface and sediment cores. The high concentration sites were mainly located in the middle and the mouth of the Dingzi Bay. The source identification indicated that most heavy metals in surface sediments originated from shipping and aquaculture, while As and Ni from industrial pollution. The correlation coefficients showed that high proportion of fine particle, TN, TOC, TP, and AVS in surface sediments could significantly elevate the bioavailability of most heavy metals.

Novel hydrophilic straw biochar for the adsorption of neonicotinoids: kinetics, thermodynamics, influencing factors, and reuse performance

Nitenpyram (NIT) is the most water-soluble neonicotinoid (NEO). It has been shown to pose a serious threat to human health and the environment but was always ignored due to its limited market share. There were few experts who studied NIT's transport behavior on biochar. In this study, two types of biochar were co-activated separately using zinc chloride combined with phosphoric acid and potassium hydroxide combined with acetic acid, marked as ZBC and KBC. Characterizations suggested that hydrophilic ZBC and KBC had more surface functional groups than unmodified biochar (BC), and specific surface areas of ZBC (456.406 m²·g^-1) and KBC (750.588 m²·g^-1) were significantly higher than of BC (67.181 m²·g^-1). The pore structures of KBC and ZBC were hierarchical porous structures with different pore sizes and typical microporous structure, respectively. The adsorption performance of either NIT or IMI on KBC was better than that on ZBC. Only 0.4 g·L^-1 of KBC can absorb 89.62% of NIT in just 5 min. The equilibrium adsorption amounts of NIT on ZBC and KBC were 17.995 mg·g^-1 and 82.910 mg·g^-1. Elovich and Langmuir models were used to evaluate the whole adsorption process, which was attributed to the chemisorption mechanism. In addition, removal rates of NIT were negatively correlated to NIT's initial concentration and positively correlated to the dose of biochar. pH had almost no effect on adsorption, but the presence of salt ions can inhibit the removal of NIT. Long-term stabilities of biochars were also acceptable. These findings will promote the development in the preparation of biochar fields and provide a positive reference value for NEO removal.

Phytochemicals, biological activity, and industrial application of lotus seedpod (Receptaculum Nelumbinis): A review

Lotus (Nelumbo nucifera Gaertn.) is a well-known food and medicinal plant. Lotus seedpod (Receptaculum Nelumbinis) is the by-products during lotus products processing, which is considered as waste. Numerous studies have been conducted on its phytochemicals, biological activity and industrial application. However, the information on lotus seedpod is scattered and has been rarely summarized. In this review, summaries on preparation and identification of phytochemicals, the biological activities of extracts and phytochemicals, and applications of raw material, extracts and phytochemicals for lotus seedpod were made. Meanwhile, the future study trend was proposed. Recent evidence indicated that lotus seedpods extracts, obtained by non-organic and organic solvents, possessed several activities, which were influenced by extraction solvents and methods. Lotus seedpods were rich in phytochemicals categorized as different chemical groups, such as proanthocyanidins, oligomeric procyanidins, flavonoids, alkaloids, terpenoids, etc. These phytochemicals exhibited various bioactivities, including ameliorating cognitive impairment, antioxidation, antibacterial, anti-glycative, neuroprotection, anti-tyrosinase and other activities. Raw material, extracts and phytochemicals of lotus seedpods could be utilized as sources for biochar and biomass material, in food industry and as dye. This review gives well-understanding on lotus seedpod, and provides theoretical basis for its future research and application.

Recent advances in waste-derived functional materials for wastewater remediation

Water pollution is a major concern for public health and a sustainable future. It is urgent to purify wastewater with effective methods to ensure a clean water supply. Most wastewater remediation techniques rely heavily on functional materials, and cost-effective materials are thus highly favorable. Of great environmental and economic significance, developing waste-derived materials for wastewater remediation has undergone explosive growth recently. Herein, the applications of waste (e.g., biowastes, electronic wastes, and industrial wastes)-derived materials for wastewater purification are comprehensively reviewed. Sophisticated strategies for turning wastes into functional materials are firstly summarized, including pyrolysis and combustion, hydrothermal synthesis, sol-gel method, co-precipitation, and ball milling. Moreover, critical experimental parameters within different design strategies are discussed. Afterward, recent applications of waste-derived functional materials in adsorption, photocatalytic degradation, electrochemical treatment, and advanced oxidation processes (AOPs) are analyzed. We mainly focus on the development of efficient functional materials via regulating the internal and external characteristics of waste-derived materials, and the material's property-performance correlation is also emphasized. Finally, the key future perspectives in the field of waste-derived materials-driven water remediation are highlighted.

Biochar from fungiculture waste for adsorption of endocrine disruptors in water

The agricultural residues are ecofriendly alternatives for removing contaminants from water. In this way, a novel biochar from the spent mushroom substrate (SMS) was produced and assessed to remove endocrine disruptor from water in batch and fixed-bed method. SMS were dried, ground, and pyrolyzed. Pyrolysis was carried out in three different conditions at 250 and 450 °C, with a residence time of 1 h, and at 600 °C with a residence time of 20 min. The biochar was firstly tested in a pilot batch with 17α-ethinylestradiol (EE2) and progesterone. The residual concentrations of the endocrine disruptors were determined by HPLC. The biochar obtained at 600 °C showed the best removal efficiency results. Then, adsorption parameters (isotherm and kinetics), fixed bed tests and biochar characterization were carried out. The Langmuir model fits better to progesterone while the Freundlich model fits better to EE2. The Langmuir model isotherm indicated a maximum adsorption capacity of 232.64 mg progesterone/g biochar, and 138.98 mg EE2/g biochar. Images from scanning electrons microscopy showed that the 600 °C biochar presented higher porosity than others. In the fixed bed test the removal capacity was more than 80% for both endocrine disruptors. Thus, the biochar showed a good and viable option for removal of contaminants, such as hormones.

Removal of endocrine disrupters from the contaminated environment: public health concerns, treatment strategies and future perspectives - A review

Endocrine-disrupting compounds (EDCs) are emerging contaminants of concern (ECC) that disturb endocrine hormones and system functionality even at very low concentrations (i.e. μg/L or ng/L levels). Hence, EDCs are found in all components of the environment including surface and groundwater, wastewater, soil, outdoor and indoor air and in the contaminated foods from a variety of sources (run off from agricultural activities, sewage treatment plants, leakage from septic tanks etc.), and the effects are more severe as the majority of EDCs do not have standard regulations. The environmental mobility of EDCs is higher as conventional wastewater treatment does not degrade efficiently and the development of effective and sustainable removal technologies specifically designed for the removal of those emerging micropollutants is essential. Accordingly, EDCs cause various public health diseases such as reproductive abnormalities, obesity, various cancer types, cardiovascular risks, metabolic disorders, epigenetic alterations, autism, etc. This paper reviews the existing and emerging treatment technologies for the removal of phenolic based EDCs, such as natural estrogens (estrone (E1), 17β-estradiol (E2), estriol (E3)), synthetic estrogen 17α-ethinylestradiol (EE2) and phenolic xenoestrogens (4-nonyl phenols (4-NP) and bisphenol-A (BPA)) from the contaminated environment. These includes advanced oxidation processes (AOP), adsorption processes, membrane based filtration, bioremediation, phytoremediation and other integrated approaches. The sustainability of EDCs removal can be assured through the use of combined processes (i.e. low-cost - biological and adsorption methods with efficient and costly - AOPs) techniques through system integration to achieve better removal efficiency than using a single treatment technique. Besides, the public health concerns and future research perspectives of EDCs are also highlighted.

Recent Advances on Innovative Materials from Biowaste Recycling for the Removal of Environmental Estrogens from Water and Soil

New technologies have been developed around the world to tackle current emergencies such as biowaste recycling, renewable energy production and reduction of environmental pollution. The thermochemical and biological conversions of waste biomass for bioenergy production release solid coproducts and byproducts, namely biochar (BC), hydrochar (HC) and digestate (DG), which can have important environmental and agricultural applications. Due to their physicochemical properties, these carbon-rich materials can behave as biosorbents of contaminants and be used for both wastewater treatment and soil remediation, representing a valid alternative to more expensive products and sophisticated strategies. The alkylphenols bisphenol A, octylphenol and nonylphenol possess estrogenic activity comparable to that of the human steroid hormones estrone, 17β-estradiol (and synthetic analog 17α-ethinyl estradiol) and estriol. Their ubiquitous presence in ecosystems poses a serious threat to wildlife and humans. Conventional wastewater treatment plants often fail to remove environmental estrogens (EEs). This review aims to focus attention on the urgent need to limit the presence of EEs in the environment through a modern and sustainable approach based on the use of recycled biowaste. Materials such as BC, HC and DG, the last being examined here for the first time as a biosorbent, appear appropriate for the removal of EEs both for their negligible cost and continuously improving performance and because their production contributes to solving other emergencies, such as virtuous management of organic waste, carbon sequestration, bioenergy production and implementation of the circular economy. Characterization of biosorbents, qualitative and quantitative aspects of the adsorption/desorption process and data modeling are examined.

An efficient, green and sustainable potassium hydroxide activated magnetic corn cob biochar for imidacloprid removal

The extensive use of imidacloprid (IMI) has led to its being frequently detected in natural water, also caused the potential damage to the ecosystem. Development of efficient, green and sustainable technique is demanded to eliminate this problem. A novel biochar (KMCBC) derived from agriculture waste of corn cob was first time co-modified by potassium hydroxide (KOH), ferric chloride (FeCl₃) and zinc chloride (ZnCl₂), which showed the greater adsorption amount (410 mg g^-1 at 298 K) for imidacloprid (IMI). Pseudo-second-order kinetic and Langmuir isotherm models fitted well with the experimental data, together with the physicochemical characterization analysis, demonstrating that the adsorption process of IMI by KMCBC might be mainly controlled by micropore filling, π-π electron donor-acceptor and functional groups interactions (H-bonding and complexation). Additionally, the thermodynamics parameters suggested that IMI adsorption in this study was a spontaneous, endothermic and randomly increasing process. Besides, KMCBC owned the easy separation performance and promising environmental safety, also exhibited a high selective adsorption capacity regardless of solution pH (its optimum adsorption performance for IMI was obtained at pH = 5), inorganic ions strength and humic acid (HA) concentrations. The regenerated KMCBC (synergistic ultrasound/ethanol) could sustainably and efficiently adsorb IMI in the reuse cycles. Therefore, this study provided an efficient, green and sustainable adsorbent of KMCBC for IMI removal.

Facile fabrication and characterization of kenaf core as natural biochar for the highly efficient removal of selected endocrine-disrupting compounds

This study aims to formulate and fabricate the optimum condition of modified kenaf core (MKC) for the removal of targeted endocrine-disrupting compounds in a batch adsorption system. Kenaf core was chemically modified using phosphoric acid as an activating agent, which involved the pyrolysis step. Results indicated a significant difference (p < 0.05) for unmodified and novel modified biochar, observed in characteristic performance analysis via ultimate analysis, Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR) spectrum, and Brunauer-Emmett-teller (BET) surface area. The removal percentage of 17β-estradiol (E2) and 17α-ethinylestradiol (EE2) in individual and binary mixture systems was examined in order to ascertain the highest removal percentage for MKC application in an aqueous solution. The main and interaction effects of three prepared variables such as incorporate of impregnation concentration of an acid catalyst (0.1-1.0 M), particle size (45-1,000 µm), and dosage (1.0-20.0 g/L) were examined and statistically analyzed via design of experiment (DoE) through developed quadratic models. The removal efficiency of E2 and EE2 in an individual system leads to T₂KC > T₁KC > T₃KC, whereas that in the binary mixture system leads to T₂KC > T₁KC > T₃KC and T₁KC > T₂KC > T₃KC for E2 and EE2 adsorption, respectively, through hydrogen bonding and the π-π interaction mechanism. Thus, the findings revealed T₂KC at a moderate level of acid concentration (0.5 M H₃PO₄) to be a potential biochar, with an environmentally safe and sound profile for opposing emerging pollutant issues as well as for the attainment of sustainable development goals.

Processing of natural fibre and method improvement for removal of endocrine-disrupting compounds

Persistent endocrine-disrupting compounds (EDCs) in bodies of water are a concern for human health and constitute an environmental issue, even if present in trace amounts. Conventional treatment systems do not entirely remove EDCs from discharge effluent. Due to the ultra-trace level of EDCs which affect human health and pose an environmental issue, developing new approaches and techniques to remove these micropollutants from the discharged effluent is vital. This review discusses the most common methods of eliminating EDCs through preliminary, primary, secondary and tertiary treatments. The adsorption process is favoured for EDC removal, as it is an economical and straightforward option. The NABC aspects, which are the need, approach, benefits and challenges, were analysed based on existing circumstances, highlighting biochar as a green and renewable adsorbent for the removal of organic contaminants. From the environmental point of view, the effectiveness of this method, which uses natural fibre from the kenaf plant as a porous and economical biochar material with a selected lignocellulosic biomass, provides insights into the advantages of biochar-derived adsorbents. Essentially, the improvement of the natural fibre as an adsorbent is a focus, using carbonisation, activation, and the physiochemical process to enhance the adsorption ability of the material for pollutants in bodies of water. This output will complement sustainable water management approaches presented in previous studies for combating the emerging pollutant crisis via novel green and environmentally safe options.

Pristine and engineered biochar for the removal of contaminants co-existing in several types of industrial wastewaters: A critical review

Biochar has been widely studied as an adsorbent for the removal of contaminants from wastewater due to its unique characteristics, such as having a large surface area, well-distributed pores and high abundance of surface functional groups. Critical review of the literature was performed to understand the state of research in utilizing biochars for industrial wastewater remediation with emphasis on pollutants that co-exist in wastewater from several industrial activities, such as textile, pharmaceutical and mining industries. Such pollutants include organic (such as synthetic dyes, phenolic compounds) and inorganic contaminants (such as cadmium, lead). Multiple correspondence analyses suggest that through batch equilibrium, columns or constructed wetlands, researchers have used mechanistic modelling of isotherms, kinetics, and thermodynamics to evaluate contaminant removal in either synthetic or real industrial wastewaters. The removal of organic and inorganic contaminants in wastewater by biochar follows several mechanisms: precipitation, surface complexation, ion exchange, cation-π interaction, and electrostatic attraction. Biochar production and modifications promote good adsorption capacity for those pollutants because biochar properties stemming from production were linked to specific adsorption mechanisms, such as hydrophobic and electrostatic interactions. For instance, adsorption capacity of malachite green ranged from 30.2 to 4066.9 mg g^-1 depending on feedstock type, pyrolysis temperature, and chemical modifications. Pyrolyzing biomass at above 500 °C might improve biochar quality to target co-existing pollutants. Treating biochars with acids can also improve pollutant removal, except that the contribution of precipitation is reduced for potentially toxic elements. Studies on artificial intelligence and machine learning are still in their infancy in wastewater remediation with biochars. Meanwhile, a framework for integrating artificial intelligence and machine learning into biochar wastewater remediation systems is proposed. The reutilization and disposal of spent biochar and the contaminant release from spent biochar are important areas that need to be further studied.

A state-of-the-art review on producing engineered biochar from shellfish waste and its application in aquaculture wastewater treatment

Global production of shellfish aquaculture is steadily increasing owing to the growing market demands for shellfish. The intensification of shellfish aquaculture to maximize production rate has led to increased generation of aquaculture waste streams, particularly the effluents and shellfish wastes. If not effectively managed, these wastes could pose serious threats to human health and the ecosystem while compromising the overall sustainability of the industry. The present work comprehensively reviews the source, composition, and environmental implications of shellfish wastes and aquaculture wastewater. Moreover, recent advancements in the valorization of shellfish wastes into value-added biochar via emerging thermochemical and modification techniques are scrutinized. The utilization of the produced biochar in removing emerging pollutants from aquaculture wastewater is also discussed. It was revealed that shellfish waste-derived biochar exhibits relatively higher adsorption capacities (300-1500 mg/g) compared to lignocellulose biochar (<200 mg/g). The shellfish waste-derived biochar can be effectively employed for the removal of various contaminants such as antibiotics, heavy metals, and excessive nutrients from aquaculture wastewater. Finally, future research priorities and challenges faced to improve the sustainability of the shellfish aquaculture industry to effectively support global food security are elaborated. This review envisages that future studies should focus on the biorefinery concept to extract more useful compounds (e.g., carotenoid, chitin) from shellfish wastes for promoting environmental-friendly aquaculture.

Biomass-derived carbon-based and silica-based materials for catalytic and adsorptive applications- An update since 2010

Biomass, which defined as plant- or animal-based materials, is intriguing tremendous scientific attentions due to its renewable attribute in serving energy security. Amongst, the plant-based biomasses, particularly those that co-generated in the agriculture activities, are commonly regarded as fuel for burning, which overlooked their hidden potentials for high-end applications. Organically, the plant-based biomass constitutes of lignocellulose components, which can be served as promising precursors for functionalized carbon materials. Meanwhile, its inorganic counterpart made up of various minerals, with Si being the most concerned one. With the advancement of biomass technologies and material synthesis in recent years, numerous attempts were endeavoured to obtain valorised products from biomass. Particularly, syntheses of catalytic and adsorptive materials are actively researched in the field of biomass reutilization. Herein, our work systematically summarized the advancements of biomass-materials for these applications in recent 10 years (2010-2020), with a special focus on the carbon-based and Si-based catalytic/adsorptive materials. Significantly, the deriving steps, inclusive of both pre-treatment and post-treatment of such materials, are incorporated in the discussion, alongside with their significances revealed too. The performance of the as-obtained materials in the respective application is systematically correlated to their physicochemical properties, hence providing valuable insights to the readers. Challenges and promising directions to be explored are raised too at the end of the review, aiming to advocate better-usage of biomass while offering great opportunities to sustain catalysis and adsorption in the industrial scale.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

Removal performance and mechanisms of toxic hexavalent chromium (Cr(VI)) with ZnCl2 enhanced acidic vinegar residue biochar

Acidic vinegar residue (VR) and toxic hexavalent chromium (Cr(VI)) are unfavorable substances due to their toxicity against the environment. In this study, modified biochar was prepared to investigate the removal mechanisms of Cr(VI). The results showed that ZnCl₂ could yield highly aromatic products with improved pore structures. The adsorption capacity of modified biochar reached the highest efficiency (236.81 mg g^-1) when the mass ratio of ZnCl₂/VR was 1, which is higher than the control (9.96 mg g^-1). In addition, Cr(VI) adsorption coexisted with physical and chemical adsorption. The mechanisms of modified biochar to Cr(VI) removal included electrostatic attraction, pore filing, reduction and surface complexation. Notably, as a fermented product, VR biochar was a nitrogen-rich product; the formation of the amino group could provide a direct solid site for Cr(VI) adsorption. Subsequently, amorphous silica could be converted into silanol to provide additional adsorption sites. This work establishes the theoretical basis for efficient Cr(VI) removal and VR reuse.

Highly efficient removal of imidacloprid using potassium hydroxide activated magnetic microporous loofah sponge biochar

Extensive application of imidacloprid (IMI) in pest control and its undesirable removal efficiency enabled it to be a critical global challenge. Low cost, efficient, sustainable and environment-friendly technologies are urgently needed to be developed to remove IMI from water. A novel adsorbent of potassium hydroxide activated magnetic microporous loofah sponge biochar (KOH+Fe/Zn-LBC) was synthesized, as well as its adsorption capacity and mechanisms for IMI were investigated in this study. KOH+Fe/Zn-LBC had the superior pore structure (surface area and pore volume) and its maximum adsorption capacity for IMI could reach 738 mg g^-1 at 298 K. Kinetics, isotherms, thermodynamics and characterization analysis suggested that pore filling, hydrogen bonding and π-π conjugation were its main adsorption mechanisms. Additionally, the thermodynamic parameters described that IMI adsorption was a spontaneous, endothermic and less random process. Particularly, the magnetic separation of KOH+Fe/Zn-LBC was beneficial for its reuse. Ultrasound and ethanol co-processing could effectively regenerate the used KOH+Fe/Zn-LBC and maintain its stable sustainable adsorption capacity (99.4% of its fresh adsorption capacity after five reuse cycles). Besides, KOH+Fe/Zn-LBC exhibited a stable adsorption capacity and environmental safety in a wide pH range. Therefore, KOH+Fe/Zn-LBC has the potential to be an efficient, green and sustainable adsorbent for neonicotinoids removal.

Photocatalytic Cellulose-Paper: Deepening in the Sustainable and Synergic Combination of Sorption and Photodegradation

Clean water is one of the sustainable development goals set by the United Nations for 2030. The development of effective but worldwide affordable strategies is essential to guarantee this achievement. Photocatalysis technology fulfills these criteria whenever the photocatalyst is sustainable and nontoxic. In this article, a cellulose-paper modified with a polyamide-titanium dioxide (TiO₂) nanocomposite by dip-coating is evaluated to degrade estrogens efficiently under solar light. The study deepens on the synergic combination of the sorptive capacity of the polyamide and the activity of TiO₂. The photocatalytic performance was studied under artificial and sunlight in a miniaturized experimental setup (batch of six reactors). Also, the effects of the dispersed/immobilized catalyst, irradiation time, and adsorption evaluation were studied under kinetic conditions. The photocatalyst composition, considering the polyamide (nylon-6) and TiO₂ amounts and the dipping cycles, was studied by a response surface methodology, and the reusability of the photocatalytic cellulose-paper was investigated. The LED source provided removal efficiencies of 65, 62, and 52% (for estrone, 17β-estradiol, and estriol, respectively) after 420 min of light exposure. Under sunlight, the efficiency increased up to 99.5% for estrone and 17β-estradiol and 98.5% for estriol after 180 min of irradiation. The sustainable character of the cellulosic substrate, the low toxicity of the nanocomposite ingredients, and its performance under sunlight make the material attractive for in-field application.

Potassium phosphate/magnesium oxide modified biochars: Interfacial chemical behaviours and Pb binding performance

Removal of lead (Pb) from aqueous solutions by biochar is a promising method. In this study, wheat straw biochar (WBC) was modified by phosphate/magnesium via pre-treatment of biomass and post-treatment of biochar, noting as WBC_PMA and WBC_PMB, respectively. Based on Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses, phosphate/magnesium chemically bound to the structures of biochar surface, increasing the contents of polar groups (i.e., -COOH and -OH) and phosphorus-containing compounds, mainly Mg₃(PO₄)₂ and Mg₂P₂O₇. Owing to pyrolysis process enhancing loading ability of phosphate/magnesium, WBC_PMA possessed more active functional groups than WBC_PMB. Results showed that maximum sorption capacity of Pb was improved by modifications, following the sequence of WBC_PMA (470.09 mg/g) > WBC_PMB (308.39 mg/g) > WBC (59.93 mg/g). Pseudo-second-order kinetics and thermodynamics study indicated that chemisorption was involved in sorption process. Precipitation, complexation and cation exchange dominated Pb sorption and the corresponding contributions accounted for 17.89-32.73%, 28.84-46.22%, and 21.05-53.27%, respectively. Additionally, desorption characteristics of Pb illustrated that WBC_PMA owned more prominent stabilization ability than that of WBC and WBC_PMB. The findings of this study suggested that pre-modification method increased the contents of active groups in biochar and strengthened the removal efficiency of Pb ultimately. Due to the complexity of the actual Pb-containing wastewater environment, it was necessary to evaluate the effects of various factors on the stabilization performance of the pre-modified biochar in further.

Metal chloride-loaded biochar for phosphorus recovery: Noteworthy roles of inherent minerals in precursor

Phosphorus (P) is a valuable resource, while it is vastly lost with wastewater causing eutrophication. In this study, to recover P, composite biochars were prepared by pyrolyzing biowaste impregnated with FeCl₃ or MgCl₂. It was found that inherent mineral profiles in the biowastes played important roles in interacting with metal chlorides and determined P sorption and precipitation. Specifically, two biowastes containing distinct mineral contents, sawdust and sediment, were selected as model components, being alone or mixed at 1:1 (w/w) to prepare biochars with low, moderate and high mineral contents. Results showed that biochar itself could not absorb P, while loading FeCl₃ or MgCl₂ achieved P recovery rates of approximate 60-100% and 50-100%, respectively, via electrostatic attraction or ligand exchange of PO₄^3- with -OH/-COOH, which was attributed to the enhanced positive charges and -OH/-COOH on the materials by these metal chlorides. Inherent minerals inhibited FeCl₃ transforming into Fe₃O₄ in pyrolysis and promoted generation of Fe₄(PO₄)₃(OH)₃ in P sorption, thus high-mineral content was more appropriate for FeCl₃ loading; however, precursors with low-mineral content was suitable for MgCl₂ loading, since the bulk-C in biochar acted as porous structure to support MgO crystals with high superficial area (∼255.85 m² g^-1). Besides, FeCl₃ and MgCl₂ both drove dissolution of inherent minerals significantly, while inherent minerals inhibited release of soluble Fe and Mg²⁺ into solution, which minimized secondary pollution. This study implied that in constructing composite biochar for catching P, the type of metal chloride should match the inherent minerals in biowastes to maximize P recovery and minimize secondary pollution.

Adsorption of emerging contaminants from water and wastewater by modified biochar: A review

Emerging contaminants (ECs), a group of relatively low-concentration but high-toxicity pollutants in the environment, have attracted widespread attention in recent years. These trace pollutants can be enriched in organisms and finally transferred to human bodies, posing a potential hazard to public health. Biochar, a low-cost and high-efficiency adsorbent, has been used to treat ECs in water. However, due to certain limitations of pristine biochar, such as poor adsorption capacity, narrow adsorption range, and other shortcomings, it is necessary to modify biochar to improve its applications in water treatment for ECs. Currently, there are a lot of reports on the removal of ECs from water by modified biochar. These studies explored different modification methods to functionalize biochar with various physicochemical properties, which resulted in distinct adsorption effects, behaviors and mechanisms of modified biochar on different ECs. There is a need to systematically review and digest the knowledge on the adsorption of ECs on modified biochar. In this review, recent biochar modification methods used in ECs removal are firstly summarized, and the adsorption performance and mechanisms of modified biochar on typical ECs are then systematically reviewed. Finally, the main research directions and trends, as well as recommendations and suggestions for future development are pointed out.

Biochar based sorptive remediation of steroidal estrogen contaminated aqueous systems: A critical review

Remediation of steroidal estrogens from aqueous ecosystems is of prevailing concern due to their potential impact on organisms even at trace concentrations. Biochar (BC) is capable of estrogen removal due to its rich porosity and surface functionality. The presented review emphasizes on the adsorption mechanisms, isotherms, kinetics, ionic strength and the effect of matrix components associated with the removal of steroidal estrogens. The dominant sorption mechanisms reported for estrogen were π-π electron donor-acceptor interactions and hydrogen bonding. Natural organic matter and ionic species were seen to influence the hydrophobicity of the estrogen in multiple ways. Zinc activation and magnetization of the BC increased the surface area and surface functionalities leading to high adsorption capacities. The contribution by persistent free radicals and the arene network of BC have promoted the catalytic degradation of adsorbates via electron transfer mechanisms. The presence of surface functional groups and the redox activity of BC facilitates the bacterial degradation of estrogens. The sorptive removal of estrogens from aqueous systems has been minimally reviewed as a part of a collective evaluation of micropollutants. However, to the best of our knowledge, a critique focusing specifically and comprehensively on BC-based removal of steroidal estrogens does not exist. The presented review is a critical assessment of the existing literature on BC based steroidal estrogen adsorption and attempts to converge the scattered knowledge regarding its mechanistic interpretations. Sorption studies using natural water matrices containing residue level concentrations, and dynamic sorption experiments can be identified as future research directions.

Benign zinc oxide betaine-modified biochar nanocomposites for phosphate removal from aqueous solutions

Phosphate is one of the most costly and complex environmental pollutants that leads to eutrophication, which decreases water quality and access to clean water. Among different adsorbents, biochar is one of the promising adsorbents for phosphate removal as well as heavy metal removal from an aqueous solution. In this study, biochar was impregnated with nano zinc oxide in the presence of glycine betaine. The Zinc Oxide Betaine-Modified Biochar Nanocomposites (ZnOBBNC) proved to be an excellent adsorbent for the removal of phosphate, exhibiting a maximum adsorption capacity of phosphate (265.5 mg. g^-1) and fast adsorption kinetics (~100% removal at 15 min at 10 mg. L^-1 phosphate and 3 g. L^-1 nanocomposite dosage) in phosphate solution. The synthesis of these benign ZnOBBNC involves a process that is eco-friendly and economically feasible. From material characterization, we found that the ZnOBBNC has ~20-30 nm particle size, high surface area (100.01 m². g^-1), microporous (25.79 Å) structures, and 7.64% zinc content. The influence of pH (2-10), coexisting anions (Cl^-, CO₃^2-, NO₃^- and SO₄^3-), initial phosphate concentration (10-500 mg. L^-1), and ZnOBBNC dosage (0.5-5 g. L^-1) were investigated in batch experiments. From the adsorption isotherms data, the adsorption of phosphate using ZnOBBNC followed Langmuir isotherm (R² = 0.9616), confirming the mono-layered adsorption mechanism. The kinetic studies showed that the phosphate adsorption using ZnOBBNC followed the pseudo-second-order model (R² = 1.0000), confirming the chemisorption adsorption mechanism with inner-sphere complexion. Our results demonstrated ZnOBBNC as a suitable, competitive candidate for phosphate removal from both mock lab-prepared and real field-collected wastewater samples when compared to commercial nanocomposites.

Comparison of 17β-estradiol adsorption on soil organic components and soil remediation agent-biochar

Steroid estrogen residues (SEs) in the soil have attracted growing attention because of their potential for endocrine disruption. Soil organic matter (SOM) and soil remediation agent-biochar, both have important influences on the fate of SEs in the soil environment. This study compared the adsorption of 17β-estradiol (E2) on wheat straw biochar (W-BC) and cow manure biochar (C-BC) with main SOM components including biomacromolecules (cellulose, collagen and lignin) and humic acids (HA). The impact of pyrolysis temperature (350 °C, 550 °C, and 700 °C) on the adsorption capacity of biochar and different concentrations NaClO oxidation on the adsorption capacity of HA were also investigated. The experimental results showed that the adsorption of E2 by biomolecules conformed to the linear isotherm (R² > 0.88), and the adsorption of E2 on biochars and HA were well described by the Langmuir and Freundlich isotherm (R² > 0.94). Meanwhile, the order of the E2 adsorption capacity of sorbents was W-BC > C-BC > HA > lignin > collagen > cellulose. The adsorption capacity of biochar and SOM for E2 increased with the enhancement of aromaticity and hydrophobicity and the reduction of polarity. In addition, the increase of pyrolysis temperature of biochars also promoted the adsorption capacity of E2, while oxidation treatment with NaClO reduced the adsorption capacity of HA to E2. These results deepened the understanding of the adsorption behaviour of E2 on SOM and biochar, and expanded the understanding of the behaviour of SEs in the soil environment.

Synthesis a graphene-like magnetic biochar by potassium ferrate for 17β-estradiol removal: Effects of Al2O3 nanoparticles and microplastics

A graphene-like magnetic biochar (GLMB) was synthesized using lotus seedpod and potassium ferrate with simple step and applied for E2 adsorption. GLMB was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscope (AFM), X-ray photoelectron spectroscopy (XPS), Raman, X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and BET surface area. Several common (solution pH, ionic strength, humic acid and foreign ions) and new (Al₂O₃ nanoparticles and microplastics (MPs)) water experiment conditions were investigated. Characterization results demonstrated that the sample was fabricated successfully and it possessed some graphene-like properties and a large surface area (828.37 m²/g). Adsorption results revealed that the pseudo-second-order kinetics and Langmuir isotherm models could provide a better description for E2 uptake behavior. The E2 adsorption capacity could be influenced by solution pH, ionic strength and SO₄^2- ions, and the effect of humic acid and background electrolyte (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl^-, NO₃^-, PO₄^3-) could be neglected. The presences of Al₂O₃/MPs significantly decreased the time to reach adsorption equilibrium for E2 adsorption on GLMB, but had no obvious improvement or inhibiting effects on E2 removal when the adsorption reached equilibrium. The adsorption mechanism for E2 adsorption on GLMB was multiple, which involving π-π interactions, micropore filling effects, electrostatic interaction. The regeneration experiments showed that GLMB possessed a good regeneration performance. Based on the experimental results and comparative analysis with other adsorbents, GLMB was an economical, high-efficiency, green and recyclable adsorbent for E2 removal from aqueous solution.

Efficient Removal of Diclofenac from Aqueous Solution by Potassium Ferrate-Activated Porous Graphitic Biochar: Ambient Condition Influences and Adsorption Mechanism

Porous graphitic biochar was synthesized by one-step treatment biomass using potassium ferrate (K₂FeO₄) as activator for both carbonization and graphitization processes. The modified biochar (Fe@BC) was applied for the removal of diclofenac sodium (DCF) in an aqueous solution. The as-prepared material possesses a well-developed micro/mesoporous and graphitic structure, which can strengthen its adsorption capacity towards DCF. The experimental results indicated that the maximum adsorption capacity (q_max) of Fe@BC for DCF obtained from Langmuir isotherm simulation was 123.45 mg·L⁻¹ and it was a remarkable value of DCF adsorption in comparison with that of other biomass-based adsorbents previously reported. Thermodynamic quality and effect of ionic strength studies demonstrated that the adsorption was a endothermic process, and higher environmental temperatures may be more favorable for the uptake of DCF onto Fe@BC surface; however, the presence of NaCl in the solution slightly obstructed DCF adsorption. Adsorption capacity was found to be decreased with the increase of solution pH. Additionally, the possible mechanism of the DCF adsorption process on Fe@BC may involve chemical adsorption with the presence of H-bonding and π–π interaction. With high adsorption capacity and reusability, Fe@BC was found to be a promising absorbent for DCF removal from water as well as for water purification applications.

Potentials of Biochars Derived from Bamboo Leaf Biomass as Energy Sources: Effect of Temperature and Time of Heating

Biochars from bamboo leaves as a potential energy resource were synthesized by annealing in the oxygen-free environment. Samples were characterized using proximate analysis, Fourier-transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). Heating temperatures are 250°C, 300°C, and 350°C and for each temperature, the time was varied between 30, 60, and 90 minutes. The heating time for 30 minutes results in FC 30.777% and calorific value 15 MJ/Kg at temperature 250°C and decreased to 4.004% and 6 MJ/Kg at temperature 350°C, respectively. EDS shows the time of heating is an important parameter which shows the carbon and nitrogen contents were decreasing with the increase in the heating time, and silicon and oxygen contents were increasing with increase in the heating time. XRD shows broad (002) reflections between 20° and 30°, which indicated disordered carbon with small domains of coherent and parallel stacking of the graphene sheets, which is consistent with surface morphology of the SEM image. The experimental results indicated that heating at 300°C for 30 minutes is an effective and efficient parameter for fabrication of low-cost carbon from bamboo leaves which is a source of useful energy.