Behaviour of a new antioxidant active film versus oxidizable model compounds

Influence of chitin nanofibers and gallic acid on physical-chemical and biological performances of chitosan-based films

In this work, chitosan films loaded with gallic acid and different content of chitin nanofibers were prepared and subjected to different characterization techniques. The results showed that the inclusion of gallic acid to chitosan films caused moderate decrease in water vapor permeability (by 29 %) and increased tensile strength of films (by 169 %) in comparison to the neat chitosan films. Furthermore, it was found that the addition of chitin nanofibers up to 30 % into chitosan/gallic acid films additionally improved tensile strength (by 474 %) and reduced plasticity of films (by 171 %), when compared to the chitosan/gallic acid films. Increased concentration of chitin nanofibers in films reduced the overall water vapor permeability of films by 51 %. In addition, gallic acid and chitin nanofibers had synergic effect on high chitosan film's antioxidant and antifungal activity toward Botrytis cinerea (both above 95 %). Finally, chitosan/gallic acid/chitin nanofibers films reduced decay incidence of strawberries, increased total soluble solid content, and promoted high production of some polyphenols during cold storage, in comparison to the control chitosan films and uncoated strawberry samples. Hence, these results suggest that chitosan/gallic acid/chitin nanofibers can present eco-sustainable approach for preservation of strawberries, giving them additional nutritional value.

Analysis of Bioactive Aroma Compounds in Essential Oils from Algerian Plants: Implications for Potential Antioxidant Applications

In samples of Artemisia campestris (AC), Artemisia herba-alba (AHA) and Salvia jordanii (SJ) essential oils, up to 200 distinct volatile compounds were identified. Using headspace solid-phase microextraction combined with gas chromatography-olfactometry-mass spectrometry (HS-SPME-GC-O-MS), different panelists detected 52 of these compounds. This study offers the most detailed analysis of bioactive compound profiles conducted so far. The most abundant compounds identified were curcumene, making up 12.96% of AC, and camphor, constituting 21.67% of AHA and 19.15% of SJ. The compounds with the highest odor activity value (OAV) were (E,Z)-2,4-nonadienal (geranium, pungent), 3-nonenal (cucumber) and 2-undecenal (sweet) in AC, AHA and SJ, respectively. AHA essential oil showed significant antioxidant activity (IC50 = 41.73 ± 4.14 mg/g) and hydroxyl radical generation (hydroxylation percentage = 29.62 ± 3.14), as assessed by the diphenylpicrylhydrazyl (DPPH) method. In terms of oxygen radical absorbance capacity (ORAC), the strongest antioxidant activity was obtained for SJ essential oil (antioxidant activity of the essential oils, AOX = 337.49 ± 9.87).

Development of innovative antioxidant food packaging systems based on natural extracts from food industry waste and Moringa oleifera leaves

Active packaging that prolongs food shelf life, maintaining its quality and safety, is an increasing industrial demand, especially if integrated in a circular economy model. In this study, the fabrication and characterization of sustainable cellulose-based active packaging using food-industry waste and natural extracts as antioxidant agents was assessed. Grape marc, olive pomace and moringa leaf extracts obtained by supercritical fluid, antisolvent and maceration extraction in different solvents were compared for their antioxidant power and phenolic content. Grape and moringa macerates in acetone and methanol, as the most efficient and cost-effective extracts, were incorporated in the packaging as coatings or in-between layers. Both systems showed significant free-radical protection in vitro (antioxidant power 50%) and more than 50% prevention of ground beef lipid peroxidation over 16 days by indirect TBARS and direct in situ Raman microspectroscopy measurements. Therefore, these systems are promising for industrial applications and more sustainable farm-to-fork food production systems.

Experimental investigations on PVA/chitosan and PVA/chitin films for active food packaging using Oxytenanthera abyssinica lignin nanoparticles and its UV-shielding, antimicrobial, and antiradical effects

This study investigated the effect of adding lignin nanoparticles (LNPs) derived from Oxytenanthera abyssinica via alkali-acid nanoprecipitation method to polyvinyl alcohol/chitosan (PVA/CI) and polyvinyl alcohol/chitin (PVA/CH) films for the active food packaging applications. Adding LNPs at concentrations of 1 % and 3 % improved the films' thermal stability and mechanical properties. The lowest water solubility and moisture content were observed in PVA/CI/LNPs films. LNPs exhibited effective 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities, with the highest values observed in PVA/CH/LNPS and PVA/CI/LNPS films with values of 87.47 and 88.74 % respectively. The addition of LNPs also improved the UV-blocking abilities of the films. PVA/CH/LNP3 and PVA/CI/LNP3 have the smallest percentage transmission values of 3.34 % and 0.86 % in the UV range. The overall migration of dietary stimulants was lower in PVA/CI/LNPS and PVA/CH/LNPS films compared to PVA film. Antibacterial tests demonstrated the inhibitory capacity of the synthesized biofilms against both gram-positive and negative bacterial species, with the highest inhibitory value of 26 mm. The study suggests that PVA/CH/LNPS and PVA/CI/LNPS films have potential applications as active food packaging materials and can be explored in other potential applications such as drug delivery, tissue engineering, wound healing, and slow-release urea fertilizer development.

An all-cellulose sponge with a nanofiller-assisted hierarchical cellular structure for fruit maintaining freshness

Cellulose sponges with compressibility and resilience are an ideal packaging material for fruits with fragile skin. Here, a soft and elastic all-cellulose sponge (CS) with a hierarchical cellular structure was fabricated, where the long molecular chain cellulose constructed major pores, the cellulose at nanoscale acted as an elastic nanofiller to fill the gaps of long molecular chain cellulose fibers and constructed minor pores. With these two kinds of pores, this structure can absorb strain hierarchically. The sponge can protect fruits from mechanical damage when dropped or repeated vibration. Furthermore, the CS modified with chlorogenic acid (C-CGAS) had excellent antibacterial and antifungal abilities. Therefore, C-CGAS could extend the storage time of strawberries to 18 days without any microbial invasion, which is the longest storage time reported thus far. This study provides a new idea for the preparation of polymer sponges and a new design for the development of antimicrobial packaging materials.

Effect of Antimicrobial and Antioxidant Rich Pomegranate Peel Based Edible Coatings on Quality and Functional Properties of Chicken Nuggets

The current study evaluated the effect of pomegranate peel-based edible coating on chicken nuggets in order to develop a functional and safe product, high in nutritional value. For this purpose, 2,2-diphenyl-1-picrylhydrazyl (DPPH) and total phenolic content (TPC) assays were performed to check the potential antioxidant activity of chicken nuggets; microbial control, including total aerobic count and coliforms population, was performed for quality and safety purposes; and thiobarbituric acid reactive substances (TBARS) and peroxide value (POV) were performed to determine the oxidative stability of chicken nuggets. Different treatments were applied at different storage periods (0th, 7th, 14th and 21st day). The higher value of total aerobic count (5.09 ± 0.05 log CFU/g) and coliforms (3.91 ± 0.06 log CFU/g) were obtained for the uncoated samples, while the lower population was enumerated in the combination of sodium alginate (SA) and pomegranate peel powder (PPP). However, DPPH (64.65 ± 2.15%) and TPC (135.66 ± 3.07 GAE/100 g) values were higher in the coated chicken nuggets (SA (1.5%) and PPP (1.5%)) and lowest in the control samples. The higher value of TBARS (1.62 ± 0.03 MDA/kg) and POV (0.92 ± 0.03 meq peroxide/kg) were observed in the uncoated chicken nuggets. In the Hunter color system, L*, a*, and b* peak values were determined in the coated chicken nuggets with SA (1.5%) + PPP (1.5%) at the 21st day of storage. The uncoated chicken nuggets had different sensory characteristics (appearance, color, taste, texture, and overall acceptability) compared to the coated samples. Conclusively, coating based on the combination of SA (1.5%) and PPP (1.5%) increased the quality, safety, and nutritional properties of chicken nuggets.

Development and Characterization of Fenugreek Protein-Based Edible Film

The present investigation studied the physicochemical, mechanical, structural, thermal, and morphological attributes of a novel edible film formed from fenugreek protein concentrate. Films were produced at different pH-9, 10, 11, and 12-and the effect of the pH on the films was studied. As the pH increased, tensile strength increased while water vapor absorption decreased, which is interrelated to the surface morphological properties; as the pH increased, the surface became smoother and compact without any cavities. The films produced were darker in color. Fenugreek protein films exhibited good thermal stability. Fourier transform infrared spectroscopy (FTIR) revealed the presence of strong bonding for the films made at alkaline pH. X-ray diffraction analysis (XRD) indicated the major structure of the film was amorphous. The study demonstrated that the fenugreek protein concentrate film has influential characteristics and can be used as an edible packaging film.

Characterization of a flavonol-rich antioxidant fraction from Spondias purpurea L. pulp and the effect of its incorporation on cellulose acetate-based film

BACKGROUND

Active packaging containing natural flavonoid has recently emerged as a result of its potential to inhibit the oxidation of foods by interacting with it and/or its surrounding environment, with the aim of counteracting oxidation reactions and extending the shelf-life of foods. The plant Spondias purpurea L. is widely found in northeastern Brazil and is known to contain bioactive flavonoids. The present study aimed to obtain a flavonoid-rich fraction from the pulp of S. purpurea L. and incorporate it into the cellulose acetate film to obtain biodegradable films with antioxidant properties.

RESULTS

The fractionation in SiO₂ open-column chromatography of the S. purpurea pulp crude extract furnished an antioxidant active fraction containing the flavonols quercetin 3-O-rutinoside and kaempferol 3-O-rutinoside as the major compounds. This active fraction was incorporated (10, 20 and 30 g kg^-1 ) into the substance produced with the casting method for cellulose acetate films. The films produced were characterized concerning mechanical properties, water vapor permeability (WVP) and antioxidant activity.

CONCLUSION

The incorporation of the active flavonoid fraction from S. purpurea in the cellulose acetate films decreases WVP and elongation at break, at the same time as increasing antioxidant activity, tensile strength and elastic modulus. Thus, the S. purpurea pulps may be an alternative as a source of antioxidants for use in cellulose acetate films. © 2020 Society of Chemical Industry.

Evolution of Flavors in Extra Virgin Olive Oil Shelf-Life

Extra virgin olive oil (EVOO) is one of the most distinctive ingredients of the Mediterranean diet. There are many properties related to this golden ingredient, from supreme organoleptic characteristics to benefits for human health. EVOO contains in its composition molecules capable of exerting bioactivities such as cardio protection, antioxidant, anti-inflammatory, antidiabetic, and anticancer activity, among others, mainly caused by unsaturated fatty acids and certain minor compounds such as tocopherols or phenolic compounds. EVOO is considered the highest quality vegetable oil, which also implies a high sensory quality. The organoleptic properties related to the flavor of this valued product are also due to the presence of a series of compounds in its composition, mainly some carbonyl compounds found in the volatile fraction, although some minor compounds such as phenolic compounds also contribute. However, these properties are greatly affected by the incidence of certain factors, both intrinsic, such as the olive variety, and extrinsic, such as the growing conditions, so that each EVOO has a particular flavor. Furthermore, these flavors are susceptible to change under the influence of other factors throughout the oil's shelf-life, such as oxidation or temperature. This work offers a description of some of the most remarkable compounds responsible for EVOO's unique flavor and aroma, the factors affecting them, the mechanism that lead to the degradation of EVOO, and how flavors can be altered during the shelf-life of the oil, as well as several strategies suggested for the preservation of this flavor, on which the quality of the product also depends.

Effect of Cellulose Nanocrystals and Lignin Nanoparticles on Mechanical, Antioxidant and Water Vapour Barrier Properties of Glutaraldehyde Crosslinked PVA Films

In this work, PVA nanocomposite films containing cellulose nanocrystals (CNC) and different amounts of lignin nanoparticles (LNP), prepared via a facile solvent cast method, were crosslinked by adding glutaraldehyde (GD). The primary objective was to investigate the effects of crosslinker and bio-based nanofillers loading on thermal, mechanical, antioxidant and water barrier behaviour of PVA nanocomposite films for active food packaging. Thermogravimetric analysis showed improved thermal stability, due to the strong interactions between LNP, CNC and PVA in the presence of GD, while Wide-angle X-ray diffraction results confirmed a negative effect on crystallinity, due to enhanced crosslinking interactions between the nanofillers and PVA matrix. Meanwhile, the tensile strength of PVA-2CNC-1LNP increased from 26 for neat PVA to 35.4 MPa, without sacrificing the ductility, which could be explained by a sacrificial hydrogen bond reinforcing mechanism induced by spherical-like LNP. UV irradiation shielding effect was detected for LNP containing PVA films, also migrating ingredients from PVA nanocomposite films induced radical scavenging activity (RSA) in the produced films in presence of LNP. Furthermore, PVA-CNC-LNP films crosslinked by GD showed marked barrier ability to water vapour.

Formation and characterization of protein-based films from yellow pea (Pisum sativum) protein isolate and concentrate for edible applications

This study investigated the properties of films or bioplastics fabricated using a wet processing method from yellow pea protein isolate (YPI) and protein concentrate (YPC) for potential application in food packaging. The wet processing method included mixing the protein with water and glycerol followed by casting and drying the films in a humidity- and temperature-controlled chamber. Whey protein isolate (WPI) and a film from a blend of equal amounts of YPI and WPI, labelled as YPI + WPI, were also studied. Fourier transform-infra red analysis revealed that films from YPI, YPC, WPI and YPI + WPI were formed by protein polymerisation with the plasticiser, glycerol, via hydrophobic and hydrophilic interactions. The protein films had contact angles of <90° demonstrating that they had a hydrophilic surface, with YPC < YPI < YPI + WPI < WPI. The pattern of ultraviolent light transmission of the films was WPI > YPC > YPI + WPI > YPI, whereas the mechanical and thermal resilience of films formulated from YPI, YPC and the protein blend were comparable to the properties of WPI-based films. The findings demonstrate that yellow pea proteins can be used as biomaterials to develop protein and protein-blend films or bioplastics for food packaging and edible applications.

•

Bioplastics were fabricated from yellow pea protein isolate and concentrate, with glycerol.

•

Contact angles of pea protein films indicate more hydrophobic surface than whey protein films.

•

Pea protein films had more surface structure homogeneity and limited light transmission.

•

Pea + whey protein blend did not produce synergistic effects in film property.

•

Film physico-mechanical properties are promising for food packaging application.

Polymeric Nanocomposites and Nanocoatings for Food Packaging: A Review

Special properties of the polymeric nanomaterials (nanoscale size, large surface area to mass ratio and high reactivity individualize them in food packaging materials. They can be processed in precisely engineered materials with multifunctional and bioactive activity. This review offers a general view on polymeric nanocomposites and nanocoatings including classification, preparation methods, properties and short methodology of characterization, applications, selected types of them used in food packaging field and their antimicrobial, antioxidant, biological, biocatalyst and so forth, functions.

Rapid and noninvasive quality control of anhydrous milk fat by PTR-MS: The effect of storage time and packaging

In this study, proton transfer reaction-mass spectrometry (PTR-MS), coupled with a time-of-flight mass analyzer and a multipurpose automatic sampler, was evaluated as a rapid and nondestructive tool for the quality control of anhydrous milk fat. Anhydrous milk fats packed in cardboard and bag-in-box were compared during refrigerated shelf life at 4°C for 9 months. Anhydrous milk fat samples were taken at 120, 180, and 240 days and measured by PTR-MS during storage at 50°C for 11 days. Univariate and multivariate data analysis were performed in order to classify samples according to the packaging type and compare aromatic profiles. Markers related to both packaging and storage duration were identified, and all stored samples were clearly distinguishable from reference fresh samples. Significant differences in some key butter aroma compounds such as 2-pentanone, 2-heptanone, 2/3-methylbutanal, acetoin, and butanoic acid were observed between different types of packaging. During the refrigerated storage, differences related to packaging are more evident, while during the storage at 50°C, the fat oxidation induced by the high temperature becomes the most relevant phenomenon independently of the packaging type. These results indicate the importance of avoiding anhydrous milk fat storage at 50°C for long times during industrial production processes. All together data demonstrated the viability of PTR-MS as a rapid and high-sensitivity tool in agroindustry quality control program.

Storage stability of traditional Tunisian butter enriched with antioxidant extract from tomato processing by-products

Traditional Tunisian butter (TTB) is one of the most appreciated dairy products in Tunisia. Herein, the storage stability of TTB enriched with antioxidants from tomato processing by-products (TPB) was evaluated during 60days of storage at 4°C. TPB extract contains significant amounts of lycopene and phenolics. TTB enriched with 400mg of TPB extract/kg of TTB revealed the lowest peroxide values at all the determination intervals. Adding 400mg of TPB extract/kg of TTB did not exhibit any undesired effect on lactic bacteria which are necessary for development of aroma and chemical properties of TTB. However, raw TTB and highly enriched TTB (800mg of TPB extract/kg of TTB) displayed higher lipid peroxidation. The detrimental effect of high antioxidant amounts on TTB stability could be due to a possible pro-oxidant character. Thus, appropriate supplementation of TPB extract could be used in TTB as a protective agent against lipid peroxidation to extend its shelf-life up to two months.

Recent Developments in Film and Gas Research in Modified Atmosphere Packaging of Fresh Foods

Due to the rise of consumer's awareness of fresh foods to health, in the past few years, the consumption of fresh and fresh-cut produces has increased sturdily. Modified atmosphere packaging (MAP) possesses a potential to become one of the most appropriate technologies for packaging fresh and fresh-cut produces. The MAP has advantages of extending the shelf-life, preserving or stabilizing the desired properties of fresh produces, and convenience in handing and distribution. The success of MAP-fresh foods depends on many factors including types of fresh foods, storage temperature and humidity, gas composition, and the characteristics of package materials. This paper reviews the recent developments highlighting the most critical factors of film and gas on the quality of MAP fresh foods. Although the innovations and development of food packaging technology will continue to promote the development of novel MAP, concentrated research and endeavors from scientists and engineers are still important to the development of MAP that focuses on consumers' requirements, enhancing product quality, environmental friendly design, and cost-effective application.

Development of PLA films containing oregano essential oil (Origanum vulgare L. virens) intended for use in food packaging

Consumers' concerns about the environment and health have led to the development of new food packaging materials avoiding petroleum-based matrices and synthetic additives. The present study has developed polylactic acid (PLA) films containing different concentrations of essential oil from Origanum vulgare L. virens (OEO). The effectiveness of this new active packaging was checked for use in ready-to-eat salads. A plasticising effect was observed when OEO was incorporated in PLA films. The rest of the mechanical and physical properties of developed films did not show much change when OEO was included in the film. An antioxidant effect was recorded only for films containing the highest percentages of the active agent (5% and 10%). In addition, films exhibited in vitro antibacterial activity against Staphylococcus aureus, Yersinia enterocolitica, Listeria monocytogenes, Enterococcus faecalis and Staphylococcus carnosus. Moreover, in ready-to-eat salads, antimicrobial activity was only observed against yeast and moulds, where 5% and 10% of OEO was the most effective.

Phenolic content and antioxidant activity of olive by-products and antioxidant film containing olive leaf extract

The antioxidant activity of olive leaf (OL) and cake (OC) extracts with different solvents was evaluated. 70% of aqueous ethanol extract of OL was chosen as the most antioxidant extract based on antiradical activity (DPPH) (95.4±0.3%) and oxygen radical absorbance capacity (ORAC) (0.82±0.07g equivalent Trolox per g of solution) assays. This OL extract was incorporated in two multilayer materials consisting of (i) polyethylene/polyethylene (PE/PE) film and (ii) polyethylene/paper (PE/P). These multilayers were exposed to a gas stream enriched in free radicals to evaluate the scavenging capacity of both materials. PE/PE film exhibited the highest scavenging activity of free radicals (78.8%). Migration of the phenolic compounds from olive by-products into two simulants was performed and demonstrated a non-migrating behavior. The limits of detection and quantification for oleuropein were 0.5μgkg(-1) and 1.7μgkg(-1) and for Luteolin-7-O-glucoside 1.3μgkg(-1) and 4.3μg kg(-1) respectively.

Active Packaging Coatings

Active food packaging involves the packaging of foods with materials that provide an enhanced functionality, such as antimicrobial, antioxidant or biocatalytic functions. This can be achieved through the incorporation of active compounds into the matrix of the commonly used packaging materials, or by the application of coatings with the corresponding functionality through surface modification. The latter option offers the advantage of preserving the packaging materials’ bulk properties nearly intact. Herein, different coating technologies like embedding for controlled release, immobilization, layer-by-layer deposition, and photografting are explained and their potential application for active food packaging is explored and discussed.

Active food packaging based on molecularly imprinted polymers: study of the release kinetics of ferulic acid

A novel active packaging based on molecularly imprinted polymer (MIP) was developed for the controlled release of ferulic acid. The release kinetics of ferulic acid from the active system to food simulants (10, 20, and 50% ethanol (v/v), 3% acetic acid (w/v), and vegetable oil), substitutes (95% ethanol (v/v) and isooctane), and real food samples at different temperatures were studied. The key parameters of the diffusion process were calculated by using a mathematical modeling based on Fick's second law. The ferulic acid release was affected by the temperature as well as the percentage of ethanol of the simulant. The fastest release occurred in 95% ethanol (v/v) at 20 °C. The diffusion coefficients (D) obtained ranged between 1.8 × 10(-11) and 4.2 × 10(-9) cm(2)/s. A very good correlation between experimental and estimated data was obtained, and consequently the model could be used to predict the release of ferulic acid into food simulants and real food samples.

Properties and antioxidant action of actives cassava starch films incorporated with green tea and palm oil extracts

There is an interest in the development of an antioxidant packaging fully biodegradable to increase the shelf life of food products. An active film from cassava starch bio-based, incorporated with aqueous green tea extract and oil palm colorant was developed packaging. The effects of additives on the film properties were determined by measuring mechanical, barrier and thermal properties using a response surface methodology design experiment. The bio-based films were used to pack butter (maintained for 45 days) under accelerated oxidation conditions. The antioxidant action of the active films was evaluated by analyzing the peroxide index, total carotenoids, and total polyphenol. The same analysis also evaluated unpacked butter, packed in films without additives and butter packed in LDPE films, as controls. The results suggested that incorporation of the antioxidants extracts tensile strength and water vapor barrier properties (15 times lower) compared to control without additives. A lower peroxide index (231.57%), which was significantly different from that of the control (p<0.05), was detected in products packed in film formulations containing average concentration of green tea extracts and high concentration of colorant. However, it was found that the high content of polyphenols in green tea extract can be acted as a pro-oxidant agent, which suggests that the use of high concentration should be avoided as additives for films. These results support the applicability of a green tea extract and oil palm carotenoics colorant in starch films totally biodegradable and the use of these materials in active packaging of the fatty products.

Trends in the use of natural antioxidants in active food packaging: a review

The demand for natural antioxidant active packaging is increasing due to its unquestionable advantages compared with the addition of antioxidants directly to the food. Therefore, the search for antioxidants perceived as natural, namely those that naturally occur in herbs and spices, is a field attracting great interest. In line with this, in the last few years, natural antioxidants such as α-tocopherol, caffeic acid, catechin, quercetin, carvacrol and plant extracts (e.g. rosemary extract) have been incorporated into food packaging. On the other hand, consumers and the food industry are also interested in active biodegradable/compostable packaging and edible films to reduce environmental impact, minimise food loss and minimise contaminants from industrial production and reutilisation by-products. The present review focuses on the natural antioxidants already applied in active food packaging, and it reviews the methods used to determine the oxidation protection effect of antioxidant active films and the methods used to quantify natural antioxidants in food matrices or food simulants. Lastly consumers' demands and industry trends are also addressed.

Controlling lipid oxidation of food by active packaging technologies

Active packaging is an innovative strategy in preventing lipid oxidation. Different active substances with different mechanisms of action have been investigated for imparting antioxidant activity to active packaging systems, including free radical scavengers, metal chelators, ultraviolet (UV) absorbers, oxygen scavengers, and singlet oxygen quenchers. Antioxidant agents have been incorporated into active packaging systems in different forms, mainly including independent sachet packages, adhesive-bonded labels, physical adsorption/coating on packaging material surface, being incorporated into packaging polymer matrix, multilayer films, and covalent immobilization onto the food contact packaging surface. In this paper, we review recent advances in antioxidant active packaging with the highlight of the development and application of non-migratory active packaging systems. The potential use of emerging technologies in antioxidant active packaging is also emphasized. We further describe challenges and opportunities towards the commercial application of such antioxidant active packaging systems, with a focus on maintaining safety, quality and nutrition of packaged foods.

Influence of some packaging materials and of natural tocopherols on the sensory properties of breakfast cereals

The combined effect of natural antioxidants and packaging materials on the quality decay of breakfast cereals during storage was evaluated. Corn flakes were produced on industrial scale, using different packages and adding natural tocopherols to the ingredients, and stored for 1 year. The samples were then submitted to sensory analysis and HS-solid phase microextraction/gas chromatography/mass spectrometry (SPME/GC/MS) analysis. The packaging had a significant influence on the sensory profile of the aged product: metallized polypropylene gave the highest levels of oxidation compounds and sensory defects. The sensory profile was improved using polypropylene and especially high-density polyethylene. Natural tocopherols reduced the sensory decay of the flakes and the oxidative evolution of the volatile profile. They gave the most remarkable improvement in polypropylene (either metallized or not) packs. Polypropylene showed a barrier effect on the scalping of volatiles outside of the pack. This led to higher levels of oxidation volatiles and faster rates of the further oxidative processes involving the volatiles.